ACD-TWAMP-GEN-MIB
177 objects
TWAMP-Generator database for this Accedian Networks device.
Imported Objects
| ACCEDIAN-SMI | acdMibs |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter64 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.22420.2.19 | IdentityacdTwampGen | TWAMP-Generator database for this Accedian Networks device. | ||
| 1.3.6.1.4.1.22420.2.19.1 | TableacdTwampGenResultTable | not-accessible | current | Result table of all TWAMP-Generator entries |
| 1.3.6.1.4.1.22420.2.19.1.1 | RowacdTwampGenResultEntry | not-accessible | current | An entry consisting of results for a TWAMP-Generator instance. |
| 1.3.6.1.4.1.22420.2.19.1.1.1 | ColumnacdTwampGenResultID | not-accessible | current | Unique value for each TWAMP-Generator instance. Its value ranges from 1 to MAXINT (4 bytes). |
| 1.3.6.1.4.1.22420.2.19.1.1.2 | ColumnacdTwampGenResultInstName | read-only | current | Name of the associated TWAMP-Generator instance. |
| 1.3.6.1.4.1.22420.2.19.1.1.3 | ColumnacdTwampGenResultPeriodNb | read-only | current | The number of periods that have elapsed since the probe was enabled. |
| 1.3.6.1.4.1.22420.2.19.1.1.4 | ColumnacdTwampGenResultPeriodTime | read-only | current | The start time of the current period. |
| 1.3.6.1.4.1.22420.2.19.1.1.5 | ColumnacdTwampGenResultCurrTxPacketCount | read-only | current | The number of TWAMP packets that have been sent in the current period. |
| 1.3.6.1.4.1.22420.2.19.1.1.6 | ColumnacdTwampGenResultCurrRxPacketCount | read-only | current | The number of TWAMP packets that have been received in the current period. |
| 1.3.6.1.4.1.22420.2.19.1.1.7 | ColumnacdTwampGenResultTwoWayDelayValid | read-only | current | Indicate the validity of the Two-way instantaneous delay measurements. |
| 1.3.6.1.4.1.22420.2.19.1.1.8 | ColumnacdTwampGenResultTwoWayDelayInstValue | read-only | current | Indicates the Two-way delay instantaneous value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.19.1.1.9 | ColumnacdTwampGenResultTwoWayDelayCurrSamples | read-only | current | Indicates the number of samples gathered to calculate the current period two-way delay results. |
| 1.3.6.1.4.1.22420.2.19.1.1.10 | ColumnacdTwampGenResultTwoWayDelayCurrMinValue | read-only | current | Indicates the current Two-way delay minimum value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.19.1.1.11 | ColumnacdTwampGenResultTwoWayDelayCurrMaxValue | read-only | current | Indicates the current Two-way delay maximum value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.19.1.1.12 | ColumnacdTwampGenResultTwoWayDelayCurrAvgValue | read-only | current | Indicates the current Two-way delay average value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.19.1.1.13 | ColumnacdTwampGenResultTwoWayDelayCurrThreshEx | read-only | current | Indicates the current number of samples exceeding the limit. |
| 1.3.6.1.4.1.22420.2.19.1.1.14 | ColumnacdTwampGenResultTwoWayDvValid | read-only | current | Indicate the validity of the Two-way instantaneous delay variation measurements. |
| 1.3.6.1.4.1.22420.2.19.1.1.15 | ColumnacdTwampGenResultTwoWayDvInstValue | read-only | current | Indicates the Two-way delay variation instantaneous value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.19.1.1.16 | ColumnacdTwampGenResultTwoWayDvCurrSamples | read-only | current | Indicates the number of samples gathered to calculate the current period two-way delay variation results. |
| 1.3.6.1.4.1.22420.2.19.1.1.17 | ColumnacdTwampGenResultTwoWayDvCurrMinValue | read-only | current | Indicates the current Two-way delay variation minimum value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.19.1.1.18 | ColumnacdTwampGenResultTwoWayDvCurrMaxValue | read-only | current | Indicates the current Two-way delay variation maximum value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.19.1.1.19 | ColumnacdTwampGenResultTwoWayDvCurrAvgValue | read-only | current | Indicates the current Two-way delay variation average value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.19.1.1.20 | ColumnacdTwampGenResultTwoWayDvCurrThreshEx | read-only | current | Indicates the current number of samples exceeding the limit. |
| 1.3.6.1.4.1.22420.2.19.1.1.21 | ColumnacdTwampGenResultOneWayNeDelayValid | read-only | current | Indicate the validity of the One-way near-end instantaneous delay measurements. |
| 1.3.6.1.4.1.22420.2.19.1.1.22 | ColumnacdTwampGenResultOneWayNeDelayInstValue | read-only | current | Indicates the One-way near-end delay instantaneous value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.19.1.1.23 | ColumnacdTwampGenResultOneWayNeDelayCurrSamples | read-only | current | Indicates the number of samples gathered to calculate the current period One-way near-end delay results. |
| 1.3.6.1.4.1.22420.2.19.1.1.24 | ColumnacdTwampGenResultOneWayNeDelayCurrMinValue | read-only | current | Indicates the current One-way near-end delay minimum value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.19.1.1.25 | ColumnacdTwampGenResultOneWayNeDelayCurrMaxValue | read-only | current | Indicates the current One-way near-end delay maximum value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.19.1.1.26 | ColumnacdTwampGenResultOneWayNeDelayCurrAvgValue | read-only | current | Indicates the current One-way near-end delay average value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.19.1.1.27 | ColumnacdTwampGenResultOneWayNeDelayCurrThreshEx | read-only | current | Indicates the current number of samples exceeding the limit. |
| 1.3.6.1.4.1.22420.2.19.1.1.28 | ColumnacdTwampGenResultOneWayNeDvValid | read-only | current | Indicate the validity of the One-way near-end instantaneous delay variation measurements. |
| 1.3.6.1.4.1.22420.2.19.1.1.29 | ColumnacdTwampGenResultOneWayNeDvInstValue | read-only | current | Indicates the One-way near-end delay variation instantaneous value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.19.1.1.30 | ColumnacdTwampGenResultOneWayNeDvCurrSamples | read-only | current | Indicates the number of samples gathered to calculate the current period One-way near-end delay variation results. |
| 1.3.6.1.4.1.22420.2.19.1.1.31 | ColumnacdTwampGenResultOneWayNeDvCurrMinValue | read-only | current | Indicates the current One-way near-end delay variation minimum value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.19.1.1.32 | ColumnacdTwampGenResultOneWayNeDvCurrMaxValue | read-only | current | Indicates the current One-way near-end delay variation maximum value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.19.1.1.33 | ColumnacdTwampGenResultOneWayNeDvCurrAvgValue | read-only | current | Indicates the current One-way near-end delay variation average value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.19.1.1.34 | ColumnacdTwampGenResultOneWayNeDvCurrThreshEx | read-only | current | Indicates the current number of samples exceeding the limit. |
| 1.3.6.1.4.1.22420.2.19.1.1.35 | ColumnacdTwampGenResultOneWayFeDelayValid | read-only | current | Indicate the validity of the One-way far-end instantaneous delay measurements. |
| 1.3.6.1.4.1.22420.2.19.1.1.36 | ColumnacdTwampGenResultOneWayFeDelayInstValue | read-only | current | Indicates the One-way far-end delay instantaneous value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.19.1.1.37 | ColumnacdTwampGenResultOneWayFeDelayCurrSamples | read-only | current | Indicates the number of samples gathered to calculate the current period One-way far-end delay results. |
| 1.3.6.1.4.1.22420.2.19.1.1.38 | ColumnacdTwampGenResultOneWayFeDelayCurrMinValue | read-only | current | Indicates the current One-way far-end delay minimum value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.19.1.1.39 | ColumnacdTwampGenResultOneWayFeDelayCurrMaxValue | read-only | current | Indicates the current One-way far-end delay maximum value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.19.1.1.40 | ColumnacdTwampGenResultOneWayFeDelayCurrAvgValue | read-only | current | Indicates the current One-way far-end delay average value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.19.1.1.41 | ColumnacdTwampGenResultOneWayFeDelayCurrThreshEx | read-only | current | Indicates the current number of samples exceeding the limit. |
| 1.3.6.1.4.1.22420.2.19.1.1.42 | ColumnacdTwampGenResultOneWayFeDvValid | read-only | current | Indicate the validity of the One-way far-end instantaneous delay variation measurements. |
| 1.3.6.1.4.1.22420.2.19.1.1.43 | ColumnacdTwampGenResultOneWayFeDvInstValue | read-only | current | Indicates the One-way far-end delay variation instantaneous value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.19.1.1.44 | ColumnacdTwampGenResultOneWayFeDvCurrSamples | read-only | current | Indicates the number of samples gathered to calculate the current period One-way far-end delay variation results. |
| 1.3.6.1.4.1.22420.2.19.1.1.45 | ColumnacdTwampGenResultOneWayFeDvCurrMinValue | read-only | current | Indicates the current One-way far-end delay variation minimum value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.19.1.1.46 | ColumnacdTwampGenResultOneWayFeDvCurrMaxValue | read-only | current | Indicates the current One-way far-end delay variation maximum value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.19.1.1.47 | ColumnacdTwampGenResultOneWayFeDvCurrAvgValue | read-only | current | Indicates the current One-way far-end delay variation average value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.19.1.1.48 | ColumnacdTwampGenResultOneWayFeDvCurrThreshEx | read-only | current | Indicates the current number of samples exceeding the limit. |
| 1.3.6.1.4.1.22420.2.19.1.1.49 | ColumnacdTwampGenResultPktLossCurrSamples | read-only | current | The number of TWAMP packets that have been sent in the current period. |
| 1.3.6.1.4.1.22420.2.19.1.1.50 | ColumnacdTwampGenResultPktLossCurrLostPackets | read-only | current | The number of TWAMP packets that have been lost in the current period. |
| 1.3.6.1.4.1.22420.2.19.1.1.51 | ColumnacdTwampGenResultPktLossCurrLossRatio | read-only | current | Packet loss ratio expressed in hundreth of percent (100 is 1%). |
| 1.3.6.1.4.1.22420.2.19.1.1.52 | ColumnacdTwampGenResultPktLossCurrOutOfOrder | read-only | current | The number of out-of-order TWAMP packets in the current period. |
| 1.3.6.1.4.1.22420.2.19.1.1.53 | ColumnacdTwampGenResultPktLossCurrDuplicate | read-only | current | The number of duplicate TWAMP packets in the current period. |
| 1.3.6.1.4.1.22420.2.19.1.1.54 | ColumnacdTwampGenResultPktLossCurrGaps | read-only | current | The number of gaps that were registered during the period. |
| 1.3.6.1.4.1.22420.2.19.1.1.55 | ColumnacdTwampGenResultPktLossCurrLargestGap | read-only | current | The largest number of consecutive packets that were detected as missing. |
| 1.3.6.1.4.1.22420.2.19.2 | TableacdTwampGenStatusTable | not-accessible | current | Status table of all TWAMP-Generator entries |
| 1.3.6.1.4.1.22420.2.19.2.1 | RowacdTwampGenStatusEntry | not-accessible | current | An entry consisting of the status for a TWAMP-Generator instance. |
| 1.3.6.1.4.1.22420.2.19.2.1.1 | ColumnacdTwampGenStatusID | not-accessible | current | Unique value for each TWAMP-Generator instance. Its value ranges from 1 to MAXINT (4 bytes). |
| 1.3.6.1.4.1.22420.2.19.2.1.2 | ColumnacdTwampGenStatusInstName | read-only | current | Name of the associated TWAMP-Generator instance. |
| 1.3.6.1.4.1.22420.2.19.2.1.3 | ColumnacdTwampGenStatusTwoWayDelayAlert | read-only | current | Indicates the presence of the Two-way Delay alert. |
| 1.3.6.1.4.1.22420.2.19.2.1.4 | ColumnacdTwampGenStatusTwoWayAvgDelayAlert | read-only | current | Indicates the presence of the Two-way Average Delay alert. |
| 1.3.6.1.4.1.22420.2.19.2.1.5 | ColumnacdTwampGenStatusTwoWayDvAlert | read-only | current | Indicates the presence of the Two-way Delay Variation alert. |
| 1.3.6.1.4.1.22420.2.19.2.1.6 | ColumnacdTwampGenStatusTwoWayAvgDvAlert | read-only | current | Indicates the presence of the Two-way Average Delay Variation alert. |
| 1.3.6.1.4.1.22420.2.19.2.1.7 | ColumnacdTwampGenStatusOneWayNeDelayAlert | read-only | current | Indicates the presence of the One-way near-end Delay alert. |
| 1.3.6.1.4.1.22420.2.19.2.1.8 | ColumnacdTwampGenStatusOneWayNeAvgDelayAlert | read-only | current | Indicates the presence of the One-way near-end Average Delay alert. |
| 1.3.6.1.4.1.22420.2.19.2.1.9 | ColumnacdTwampGenStatusOneWayNeDvAlert | read-only | current | Indicates the presence of the One-way near-end Delay Variation alert. |
| 1.3.6.1.4.1.22420.2.19.2.1.10 | ColumnacdTwampGenStatusOneWayNeAvgDvAlert | read-only | current | Indicates the presence of the One-way near-end Average Delay Variation alert. |
| 1.3.6.1.4.1.22420.2.19.2.1.11 | ColumnacdTwampGenStatusOneWayFeDelayAlert | read-only | current | Indicates the presence of the One-way far-end Delay alert. |
| 1.3.6.1.4.1.22420.2.19.2.1.12 | ColumnacdTwampGenStatusOneWayFeAvgDelayAlert | read-only | current | Indicates the presence of the One-way far-end Average Delay alert. |
| 1.3.6.1.4.1.22420.2.19.2.1.13 | ColumnacdTwampGenStatusOneWayFeDvAlert | read-only | current | Indicates the presence of the One-way far-end Delay Variation alert. |
| 1.3.6.1.4.1.22420.2.19.2.1.14 | ColumnacdTwampGenStatusOneWayFeAvgDvAlert | read-only | current | Indicates the presence of the One-way far-end Average Delay Variation alert. |
| 1.3.6.1.4.1.22420.2.19.2.1.15 | ColumnacdTwampGenStatusPacketLossContinuityCheckAlert | read-only | current | Indicates the presence of the packet loss continuity check alert. |
| 1.3.6.1.4.1.22420.2.19.2.1.16 | ColumnacdTwampGenStatusPacketLossExcessivePacketLossAlert | read-only | current | Indicates the presence of the excessive packet loss alert. |
| 1.3.6.1.4.1.22420.2.19.3 | TableacdTwampGenCfgTable | not-accessible | current | Configuration table of all TWAMP-Generator entries. |
| 1.3.6.1.4.1.22420.2.19.3.1 | RowacdTwampGenCfgEntry | not-accessible | current | An entry consisting of all settings to manage a TWAMP-Generator instance. |
| 1.3.6.1.4.1.22420.2.19.3.1.1 | ColumnacdTwampGenCfgID | not-accessible | current | Unique value for each TWAMP-Generator instance. This value follows the ordering of the status and the results table. Its value ranges from 1 to MAXINT (4 bytes… |
| 1.3.6.1.4.1.22420.2.19.3.1.2 | ColumnacdTwampGenCfgName | read-write | current | This is a string to identify this TWAMP-Generator instance. |
| 1.3.6.1.4.1.22420.2.19.3.1.3 | ColumnacdTwampGenCfgState | read-write | current | Configuration state of this TWAMP-Generator entry. |
| 1.3.6.1.4.1.22420.2.19.3.1.4 | ColumnacdTwampGenCfgInterval | read-write | current | Interval in milliseconds at which TWAMP-Generator packets should be sent. |
| 1.3.6.1.4.1.22420.2.19.3.1.5 | ColumnacdTwampGenCfgReferencePeriod | read-write | current | Reference period in minutes. |
| 1.3.6.1.4.1.22420.2.19.3.1.6 | ColumnacdTwampGenCfgPktSize | read-write | current | Transmit packet size. |
| 1.3.6.1.4.1.22420.2.19.3.1.7 | ColumnacdTwampGenCfgDestIPv4Addr | read-write | current | The destination IP address used to reach the peer TWAMP-Generator instance. |
| 1.3.6.1.4.1.22420.2.19.3.1.8 | ColumnacdTwampGenCfgSourcePortNumber | read-write | current | The source UDP port number on which to listen for peer TWAMP-Generator samples. |
| 1.3.6.1.4.1.22420.2.19.3.1.9 | ColumnacdTwampGenCfgDestPortNumber | read-write | current | The destination UDP port number used to reach the peer TWAMP-Generator instance. |
| 1.3.6.1.4.1.22420.2.19.3.1.10 | ColumnacdTwampGenCfgDscp | read-write | current | The DSCP value used to reach the peer TWAMP-Generator instance. Its value ranges from 0 to 64. |
| 1.3.6.1.4.1.22420.2.19.3.1.11 | ColumnacdTwampGenCfgEcn | read-write | current | The Explicit Congestion Notification value |
| 1.3.6.1.4.1.22420.2.19.3.1.12 | ColumnacdTwampGenCfgVlan1Priority | read-write | current | The first VLAN priority used to tag the outgoing traffic. Its value ranges from 0 to 7. |
| 1.3.6.1.4.1.22420.2.19.3.1.13 | ColumnacdTwampGenCfgTwoWayMaxDelay | read-write | current | Maximum two-way delay allowed. (in usec) |
| 1.3.6.1.4.1.22420.2.19.3.1.14 | ColumnacdTwampGenCfgTwoWayMaxDelayThrs | read-write | current | Maximum consecutive two-way delay samples allowed greater than tw-max-delay. |
| 1.3.6.1.4.1.22420.2.19.3.1.15 | ColumnacdTwampGenCfgTwoWayAvgDelayThrs | read-write | current | Maximum two-way average delay.(in usec) |
| 1.3.6.1.4.1.22420.2.19.3.1.16 | ColumnacdTwampGenCfgTwoWayMaxDv | read-write | current | Maximum two-way delay variation allowed.(in usec) |
| 1.3.6.1.4.1.22420.2.19.3.1.17 | ColumnacdTwampGenCfgTwoWayMaxDvThrs | read-write | current | Maximum consecutive two-way delay samples allowed greater than tw-max-dv. |
| 1.3.6.1.4.1.22420.2.19.3.1.18 | ColumnacdTwampGenCfgTwoWayAvgDvThrs | read-write | current | Maximum two-way average delay variation.(in usec) |
| 1.3.6.1.4.1.22420.2.19.3.1.19 | ColumnacdTwampGenCfgOneWayNearEndMaxDelay | read-write | current | Maximum one-way near-end delay allowed.(in usec) |
| 1.3.6.1.4.1.22420.2.19.3.1.20 | ColumnacdTwampGenCfgOneWayNearEndMaxDelayThrs | read-write | current | Maximum consecutive one-way near-end delay samples allowed greater than ow-near-end-max-delay. |
| 1.3.6.1.4.1.22420.2.19.3.1.21 | ColumnacdTwampGenCfgOneWayNearEndAvgDelayThrs | read-write | current | Maximum one-way near-end average delay.(in usec) |
| 1.3.6.1.4.1.22420.2.19.3.1.22 | ColumnacdTwampGenCfgOneWayNearEndMaxDv | read-write | current | Maximum one-way near-end delay variation allowed.(in usec) |
| 1.3.6.1.4.1.22420.2.19.3.1.23 | ColumnacdTwampGenCfgOneWayNearEndMaxDvThrs | read-write | current | Maximum consecutive one-way near-end delay samples allowed greater than ow-near-end-max-dv. |
| 1.3.6.1.4.1.22420.2.19.3.1.24 | ColumnacdTwampGenCfgOneWayNearEndAvgDvThrs | read-write | current | Maximum one-way near-end average delay variation.(in usec) |
| 1.3.6.1.4.1.22420.2.19.3.1.25 | ColumnacdTwampGenCfgOneWayFarEndMaxDelay | read-write | current | Maximum one-way far-end delay allowed.(in usec) |
| 1.3.6.1.4.1.22420.2.19.3.1.26 | ColumnacdTwampGenCfgOneWayFarEndMaxDelayThrs | read-write | current | Maximum consecutive one-way far-end delay samples allowed greater than ow-far-end-max-delay. |
| 1.3.6.1.4.1.22420.2.19.3.1.27 | ColumnacdTwampGenCfgOneWayFarEndAvgDelayThrs | read-write | current | Maximum one-way far-end average delay.(in usec) |
| 1.3.6.1.4.1.22420.2.19.3.1.28 | ColumnacdTwampGenCfgOneWayFarEndMaxDv | read-write | current | Maximum one-way far-end delay variation allowed.(in usec) |
| 1.3.6.1.4.1.22420.2.19.3.1.29 | ColumnacdTwampGenCfgOneWayFarEndMaxDvThrs | read-write | current | Maximum consecutive one-way far-end delay samples allowed greater than ow-far-end-max-dv. |
| 1.3.6.1.4.1.22420.2.19.3.1.30 | ColumnacdTwampGenCfgOneWayFarEndAvgDvThrs | read-write | current | Maximum one-way far-end average delay variation.(in usec) |
| 1.3.6.1.4.1.22420.2.19.3.1.31 | ColumnacdTwampGenCfgPacketLossContinuityCheck | read-write | current | Continuity check threshold. |
| 1.3.6.1.4.1.22420.2.19.3.1.32 | ColumnacdTwampGenCfgPacketLossRate | read-write | current | Packet loss ratio threshold allowed without issuing an excessive packet loss alarm expressed in hundreth of percent (100 is 1%). |
| 1.3.6.1.4.1.22420.2.19.4 | TableacdTwampGenHistResultTable | not-accessible | current | Result table of all TWAMP-Generator entries |
| 1.3.6.1.4.1.22420.2.19.4.1 | RowacdTwampGenHistResultEntry | not-accessible | current | An entry consisting of results for a TWAMP-Generator instance for a specific periodin time. |
| 1.3.6.1.4.1.22420.2.19.4.1.1 | ColumnacdTwampGenHistResultID | read-only | current | Unique value for each TWAMP-Generator instance. Its value ranges from 1 to MAXINT (4 bytes). |
| 1.3.6.1.4.1.22420.2.19.4.1.2 | ColumnacdTwampGenHistResultSampleIndex | read-only | current | An index that uniquely identifies the particular sample this entry represents among all samples associated with the same TWAMP-Generator instance. This index s… |
| 1.3.6.1.4.1.22420.2.19.4.1.3 | ColumnacdTwampGenHistResultInstName | read-only | current | Name of the associated TWAMP-Generator instance. |
| 1.3.6.1.4.1.22420.2.19.4.1.4 | ColumnacdTwampGenHistResultPeriodTime | read-only | current | This is the time of the end of this entry. |
| 1.3.6.1.4.1.22420.2.19.4.1.5 | ColumnacdTwampGenHistResultTxPacketCount | read-only | current | The number of TWAMP packets that have been sent in the period. |
| 1.3.6.1.4.1.22420.2.19.4.1.6 | ColumnacdTwampGenHistResultRxPacketCount | read-only | current | The number of TWAMP packets that have been received in the period. |
| 1.3.6.1.4.1.22420.2.19.4.1.7 | ColumnacdTwampGenHistResultTwoWayDelayValid | read-only | current | Indicate the validity of the Two-way instantaneous delay measurements. |
| 1.3.6.1.4.1.22420.2.19.4.1.8 | ColumnacdTwampGenHistResultTwoWayDelayInstValue | read-only | current | Indicates the Two-way delay instantaneous value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.19.4.1.9 | ColumnacdTwampGenHistResultTwoWayDelaySamples | read-only | current | Indicates the number of samples gathered to calculate the period two-way delay results. |
| 1.3.6.1.4.1.22420.2.19.4.1.10 | ColumnacdTwampGenHistResultTwoWayDelayMinValue | read-only | current | Indicates the Two-way delay minimum value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.19.4.1.11 | ColumnacdTwampGenHistResultTwoWayDelayMaxValue | read-only | current | Indicates the Two-way delay maximum value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.19.4.1.12 | ColumnacdTwampGenHistResultTwoWayDelayAvgValue | read-only | current | Indicates the Two-way delay average value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.19.4.1.13 | ColumnacdTwampGenHistResultTwoWayDelayThreshEx | read-only | current | Indicates the number of samples exceeding the limit. |
| 1.3.6.1.4.1.22420.2.19.4.1.14 | ColumnacdTwampGenHistResultTwoWayDvValid | read-only | current | Indicate the validity of the Two-way instantaneous delay variation measurements. |
| 1.3.6.1.4.1.22420.2.19.4.1.15 | ColumnacdTwampGenHistResultTwoWayDvInstValue | read-only | current | Indicates the Two-way delay variation instantaneous value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.19.4.1.16 | ColumnacdTwampGenHistResultTwoWayDvSamples | read-only | current | Indicates the number of samples gathered to calculate the period two-way delay variation results. |
| 1.3.6.1.4.1.22420.2.19.4.1.17 | ColumnacdTwampGenHistResultTwoWayDvMinValue | read-only | current | Indicates the Two-way delay variation minimum value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.19.4.1.18 | ColumnacdTwampGenHistResultTwoWayDvMaxValue | read-only | current | Indicates the Two-way delay variation maximum value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.19.4.1.19 | ColumnacdTwampGenHistResultTwoWayDvAvgValue | read-only | current | Indicates the Two-way delay variation average value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.19.4.1.20 | ColumnacdTwampGenHistResultTwoWayDvThreshEx | read-only | current | Indicates the number of samples exceeding the limit. |
| 1.3.6.1.4.1.22420.2.19.4.1.21 | ColumnacdTwampGenHistResultOneWayNeDelayValid | read-only | current | Indicate the validity of the One-way near-end instantaneous delay measurements. |
| 1.3.6.1.4.1.22420.2.19.4.1.22 | ColumnacdTwampGenHistResultOneWayNeDelayInstValue | read-only | current | Indicates the One-way near-end delay instantaneous value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.19.4.1.23 | ColumnacdTwampGenHistResultOneWayNeDelaySamples | read-only | current | Indicates the number of samples gathered to calculate the period One-way near-end delay results. |
| 1.3.6.1.4.1.22420.2.19.4.1.24 | ColumnacdTwampGenHistResultOneWayNeDelayMinValue | read-only | current | Indicates the One-way near-end delay minimum value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.19.4.1.25 | ColumnacdTwampGenHistResultOneWayNeDelayMaxValue | read-only | current | Indicates the One-way near-end delay maximum value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.19.4.1.26 | ColumnacdTwampGenHistResultOneWayNeDelayAvgValue | read-only | current | Indicates the One-way near-end delay average value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.19.4.1.27 | ColumnacdTwampGenHistResultOneWayNeDelayThreshEx | read-only | current | Indicates the number of samples exceeding the limit. |
| 1.3.6.1.4.1.22420.2.19.4.1.28 | ColumnacdTwampGenHistResultOneWayNeDvValid | read-only | current | Indicate the validity of the One-way near-end instantaneous delay variation measurements. |
| 1.3.6.1.4.1.22420.2.19.4.1.29 | ColumnacdTwampGenHistResultOneWayNeDvInstValue | read-only | current | Indicates the One-way near-end delay variation instantaneous value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.19.4.1.30 | ColumnacdTwampGenHistResultOneWayNeDvSamples | read-only | current | Indicates the number of samples gathered to calculate the period One-way near-end delay variation results. |
| 1.3.6.1.4.1.22420.2.19.4.1.31 | ColumnacdTwampGenHistResultOneWayNeDvMinValue | read-only | current | Indicates the One-way near-end delay variation minimum value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.19.4.1.32 | ColumnacdTwampGenHistResultOneWayNeDvMaxValue | read-only | current | Indicates the One-way near-end delay variation maximum value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.19.4.1.33 | ColumnacdTwampGenHistResultOneWayNeDvAvgValue | read-only | current | Indicates the One-way near-end delay variation average value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.19.4.1.34 | ColumnacdTwampGenHistResultOneWayNeDvThreshEx | read-only | current | Indicates the number of samples exceeding the limit. |
| 1.3.6.1.4.1.22420.2.19.4.1.35 | ColumnacdTwampGenHistResultOneWayFeDelayValid | read-only | current | Indicate the validity of the One-way far-end instantaneous delay measurements. |
| 1.3.6.1.4.1.22420.2.19.4.1.36 | ColumnacdTwampGenHistResultOneWayFeDelayInstValue | read-only | current | Indicates the One-way far-end delay instantaneous value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.19.4.1.37 | ColumnacdTwampGenHistResultOneWayFeDelaySamples | read-only | current | Indicates the number of samples gathered to calculate the period One-way far-end delay results. |
| 1.3.6.1.4.1.22420.2.19.4.1.38 | ColumnacdTwampGenHistResultOneWayFeDelayMinValue | read-only | current | Indicates the One-way far-end delay minimum value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.19.4.1.39 | ColumnacdTwampGenHistResultOneWayFeDelayMaxValue | read-only | current | Indicates the One-way far-end delay maximum value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.19.4.1.40 | ColumnacdTwampGenHistResultOneWayFeDelayAvgValue | read-only | current | Indicates the One-way far-end delay average value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.19.4.1.41 | ColumnacdTwampGenHistResultOneWayFeDelayThreshEx | read-only | current | Indicates the number of samples exceeding the limit. |
| 1.3.6.1.4.1.22420.2.19.4.1.42 | ColumnacdTwampGenHistResultOneWayFeDvValid | read-only | current | Indicate the validity of the One-way far-end instantaneous delay variation measurements. |
| 1.3.6.1.4.1.22420.2.19.4.1.43 | ColumnacdTwampGenHistResultOneWayFeDvInstValue | read-only | current | Indicates the One-way far-end delay variation instantaneous value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.19.4.1.44 | ColumnacdTwampGenHistResultOneWayFeDvSamples | read-only | current | Indicates the number of samples gathered to calculate the period One-way far-end delay variation results. |
| 1.3.6.1.4.1.22420.2.19.4.1.45 | ColumnacdTwampGenHistResultOneWayFeDvMinValue | read-only | current | Indicates the One-way far-end delay variation minimum value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.19.4.1.46 | ColumnacdTwampGenHistResultOneWayFeDvMaxValue | read-only | current | Indicates the One-way far-end delay variation maximum value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.19.4.1.47 | ColumnacdTwampGenHistResultOneWayFeDvAvgValue | read-only | current | Indicates the One-way far-end delay variation average value. The value is expressed in micro-seconds. |
| 1.3.6.1.4.1.22420.2.19.4.1.48 | ColumnacdTwampGenHistResultOneWayFeDvThreshEx | read-only | current | Indicates the number of samples exceeding the limit. |
| 1.3.6.1.4.1.22420.2.19.4.1.49 | ColumnacdTwampGenHistResultPktLossSamples | read-only | current | The number of TWAMP packets that have been sent. |
| 1.3.6.1.4.1.22420.2.19.4.1.50 | ColumnacdTwampGenHistResultPktLossLostPackets | read-only | current | The number of TWAMP packets that have been lost. |
| 1.3.6.1.4.1.22420.2.19.4.1.51 | ColumnacdTwampGenHistResultPktLossLossRatio | read-only | current | Packet loss ratio expressed in hundreth of percent (100 is 1%). |
| 1.3.6.1.4.1.22420.2.19.4.1.52 | ColumnacdTwampGenHistResultPktLossOutOfOrder | read-only | current | The number of out-of-order TWAMP packets. |
| 1.3.6.1.4.1.22420.2.19.4.1.53 | ColumnacdTwampGenHistResultPktLossDuplicate | read-only | current | The number of duplicate TWAMP packets. |
| 1.3.6.1.4.1.22420.2.19.4.1.54 | ColumnacdTwampGenHistResultPktLossGaps | read-only | current | The number of gaps. |
| 1.3.6.1.4.1.22420.2.19.4.1.55 | ColumnacdTwampGenHistResultPktLossLargestGap | read-only | current | The largest number of consecutive packets that were detected as missing. |
| 1.3.6.1.4.1.22420.2.19.5 | NodeacdTwampGenNotifications | |||
| 1.3.6.1.4.1.22420.2.19.6 | NodeacdTwampGenMIBObjects | |||
| 1.3.6.1.4.1.22420.2.19.7 | NodeacdTwampGenConformance | |||
| 1.3.6.1.4.1.22420.2.19.7.1 | NodeacdTwampGenCompliances | |||
| 1.3.6.1.4.1.22420.2.19.7.1.1 | ComplianceacdTwampGenCompliance | current | The compliance statement for support of the ACD-TWAMP-GEN-MIB module. | |
| 1.3.6.1.4.1.22420.2.19.7.2 | NodeacdTwampGenGroups | |||
| 1.3.6.1.4.1.22420.2.19.7.2.1 | GroupacdTwampGenResultGroup | current | Objects for the TWAMP-Generator result Group. | |
| 1.3.6.1.4.1.22420.2.19.7.2.2 | GroupacdTwampGenStatusGroup | current | Objects for the TWAMP-Generator status Group. | |
| 1.3.6.1.4.1.22420.2.19.7.2.3 | GroupacdTwampGenCfgGroup | current | Objects for the TWAMP-Generator configuration Group. | |
| 1.3.6.1.4.1.22420.2.19.7.2.4 | GroupacdTwampGenHistResultGroup | current | Objects for the TWAMP-Generator history result Group. |