ACKSYS-WLG-MIB
265 objects
SNMPv2C Module for ACKSYS Solutions
Imported Objects
| SNMPv2-SMI | Counter32 enterprises Gauge32 IpAddress mgmt MODULE-IDENTITY OBJECT-TYPE TimeTicks |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.28097 | Nodeacksys | |||
| 1.3.6.1.4.1.28097.1 | Nodenetwork-product | |||
| 1.3.6.1.4.1.28097.1.1 | NodewifiInterface | |||
| 1.3.6.1.4.1.28097.1.1.1 | Nodesettings | |||
| 1.3.6.1.4.1.28097.1.1.1.1 | ScalarsettingInterfaceSsid | read-write | current | SSID (wireless network name) |
| 1.3.6.1.4.1.28097.1.1.1.2 | ScalarsettingInterfaceWifiMode | read-write | current | Select between MAX-ACCESS POINT and BRIDGE |
| 1.3.6.1.4.1.28097.1.1.1.3 | ScalarsettingInterfaceChannel | read-write | current | A wireless network uses specific channels to handle communication between clients. Some channels in your area may have interference from other electronic devic… |
| 1.3.6.1.4.1.28097.1.1.1.4 | ScalarsettingInterface80211Mode | read-write | current | Select IEEE 802.11x compatibility mode. |
| 1.3.6.1.4.1.28097.1.1.1.5 | ScalarsettingInterfaceSuper-a-g-Mode | read-write | current | This parameter enables the SUPER A/G mode to reach the 108 Mbits/s speed |
| 1.3.6.1.4.1.28097.1.1.1.6 | ScalarsettingEnableRadio | read-write | current | Enable / Disable wifi radio |
| 1.3.6.1.4.1.28097.1.1.1.7 | ScalarsettingTxPoxer | read-write | current | Set WIFI tx power |
| 1.3.6.1.4.1.28097.1.1.1.8 | ScalarsettingRegion | read-write | current | Set WIFI regulation domain |
| 1.3.6.1.4.1.28097.1.1.1.9 | NodesecuritySettings | |||
| 1.3.6.1.4.1.28097.1.1.1.9.1 | ScalarsecurityMode | read-write | current | Set the security mode |
| 1.3.6.1.4.1.28097.1.1.1.9.2 | NodesecurityWEP | |||
| 1.3.6.1.4.1.28097.1.1.1.9.2.1 | ScalarsecurityModeWepKeyLen | read-write | current | Set the WEP key len (64 bits or 128 bits) |
| 1.3.6.1.4.1.28097.1.1.1.9.2.2 | ScalarsecurityModeWepKey-1 | read-write | current | WEP key 1 in hexadecimal format |
| 1.3.6.1.4.1.28097.1.1.1.9.2.3 | ScalarsecurityModeWepKey-2 | read-write | current | WEP key 2 in hexadecimal format |
| 1.3.6.1.4.1.28097.1.1.1.9.2.4 | ScalarsecurityModeWepKey-3 | read-write | current | WEP key 3 in hexadecimal format |
| 1.3.6.1.4.1.28097.1.1.1.9.2.5 | ScalarsecurityModeWepKey-4 | read-write | current | WEP key 4 in hexadecimal format |
| 1.3.6.1.4.1.28097.1.1.1.9.2.6 | ScalarsecurityModeDefaultWepKey | read-write | current | Set the wep key used |
| 1.3.6.1.4.1.28097.1.1.1.9.2.7 | ScalarsecurityModeWepAuthentication | read-write | current | Set WEP Authentication |
| 1.3.6.1.4.1.28097.1.1.1.9.3 | NodesecurityWPA-WPA2 | |||
| 1.3.6.1.4.1.28097.1.1.1.9.3.1 | NodesecurityPresharedKey | |||
| 1.3.6.1.4.1.28097.1.1.1.9.3.1.1 | ScalarsecurityModeWpaPresharedKey | read-write | current | Set the group key interval |
| 1.3.6.1.4.1.28097.1.1.1.9.3.2 | NodesecurityRadius | |||
| 1.3.6.1.4.1.28097.1.1.1.9.3.2.1 | ScalarsecurityModeWPARadiusAuthenticationTimeout | read-write | obsolete | Set the group key interval |
| 1.3.6.1.4.1.28097.1.1.1.9.3.2.2 | ScalarsecurityModeWPARadiusIP | read-write | obsolete | Set the group key interval |
| 1.3.6.1.4.1.28097.1.1.1.9.3.2.3 | ScalarsecurityModeWPARadiusPort | read-write | obsolete | Set the group key interval |
| 1.3.6.1.4.1.28097.1.1.1.9.3.2.4 | ScalarsecurityModeWPARadiusSecret | read-write | obsolete | Set the group key interval |
| 1.3.6.1.4.1.28097.1.1.1.9.3.2.5 | ScalarsecurityModeWPARadiusMacAddressAuthentication | read-write | obsolete | Set the group key interval |
| 1.3.6.1.4.1.28097.1.1.1.9.3.2.6 | NodesecurityRadiusAP | |||
| 1.3.6.1.4.1.28097.1.1.1.9.3.2.6.1 | ScalarsecurityModeWPARadiusAPAuthenticationTimeout | read-write | current | Set the group key interval |
| 1.3.6.1.4.1.28097.1.1.1.9.3.2.6.2 | ScalarsecurityModeWPARadiusAPIP | read-write | current | Set the group key interval |
| 1.3.6.1.4.1.28097.1.1.1.9.3.2.6.3 | ScalarsecurityModeWPARadiusAPPort | read-write | current | Set the group key interval |
| 1.3.6.1.4.1.28097.1.1.1.9.3.2.6.4 | ScalarsecurityModeWPARadiusAPSecret | read-write | current | Set the group key interval |
| 1.3.6.1.4.1.28097.1.1.1.9.3.2.6.5 | ScalarsecurityModeWPARadiusAPMacAddressAuthentication | read-write | current | Set the group key interval |
| 1.3.6.1.4.1.28097.1.1.1.9.3.2.6.6 | NodesecurityRadiusAPBackup | |||
| 1.3.6.1.4.1.28097.1.1.1.9.3.2.6.6.1 | ScalarsecurityModeWPABackupRadiusAPIP | read-write | current | Set the group key interval |
| 1.3.6.1.4.1.28097.1.1.1.9.3.2.6.6.2 | ScalarsecurityModeWPARadiusBackupAPPort | read-write | current | Set the group key interval |
| 1.3.6.1.4.1.28097.1.1.1.9.3.2.6.6.3 | ScalarsecurityModeWPARadiusBackupAPSecret | read-write | current | Set the group key interval |
| 1.3.6.1.4.1.28097.1.1.1.9.3.2.6.6.4 | ScalarsecurityModeWPABackupRadiusAPMacAddressAuthentication | read-write | current | Set the group key interval |
| 1.3.6.1.4.1.28097.1.1.1.9.3.2.7 | NodesecurityRadiusBridge | |||
| 1.3.6.1.4.1.28097.1.1.1.9.3.2.7.1 | ScalarsecurityModeWPARadiusLogin | read-write | current | Set the group key interval |
| 1.3.6.1.4.1.28097.1.1.1.9.3.2.7.2 | ScalarsecurityModeWPARadiusPassword | read-write | current | Set the group key interval |
| 1.3.6.1.4.1.28097.1.1.1.9.3.3 | NodesecurityBackupRadius | |||
| 1.3.6.1.4.1.28097.1.1.1.9.3.3.1 | ScalarsecurityModeWPABackupRadiusIP | read-write | obsolete | Set the group key interval |
| 1.3.6.1.4.1.28097.1.1.1.9.3.3.2 | ScalarsecurityModeWPARadiusBackupPort | read-write | obsolete | Set the group key interval |
| 1.3.6.1.4.1.28097.1.1.1.9.3.3.3 | ScalarsecurityModeWPARadiusBackupSecret | read-write | obsolete | Set the group key interval |
| 1.3.6.1.4.1.28097.1.1.1.9.3.3.4 | ScalarsecurityModeWPABackupRadiusMacAddressAuthentication | read-write | obsolete | Set the group key interval |
| 1.3.6.1.4.1.28097.1.1.1.9.3.4 | ScalarsecurityModeWpaMode | read-write | current | Select the wpa mode |
| 1.3.6.1.4.1.28097.1.1.1.9.3.5 | ScalarsecurityModeWpaCipherType | read-write | current | select the cipher type |
| 1.3.6.1.4.1.28097.1.1.1.9.3.6 | ScalarsecurityModeWpaKeyUpdateInterval | read-write | current | Set the group key interval |
| 1.3.6.1.4.1.28097.1.1.1.10 | ScalarsettingAntennaChoice | read-write | current | Set the antenna type |
| 1.3.6.1.4.1.28097.1.1.1.11 | ScalarsettingTransmisionRate | read-write | current | Set the transmission rate in Mbps Automatic : -1 With SuperAG Mode : 108,96,72,48,36,24,18,12 Without SuperAG mode : 54,48,36,24,18,12,9,6 802.11b mode : 11,5.… |
| 1.3.6.1.4.1.28097.1.1.1.12 | ScalarsettingFlagUdapnopassword | read-write | current | Configure LAN settings without password |
| 1.3.6.1.4.1.28097.1.1.1.13 | ScalarsettingFlagFiltersamenet | read-write | current | Subnet filter settings: (1) Disable the filter, (2) Different subnet filter: drop all packets on the different subnet, (3) Custom subnet filter: drop all packe… |
| 1.3.6.1.4.1.28097.1.1.1.14 | ScalarsettingFlagFilterframecosom | read-write | current | Setting economy filter |
| 1.3.6.1.4.1.28097.1.1.1.15 | ScalarsettingDFSsupport | read-write | current | Setting DFS support |
| 1.3.6.1.4.1.28097.1.1.1.16 | ScalarsettingFilterCustomIpAddr | read-write | current | Set IP address of custom subnet. When settingFlagFiltersamenet is set on '(3) Custom subnet filter', you need to define custom subnet. All packets on the custo… |
| 1.3.6.1.4.1.28097.1.1.1.17 | ScalarsettingFilterCustomSubnetMask | read-write | current | Set subnet mask of custom subnet. When settingFlagFiltersamenet is set on '(3) Custom subnet filter', you need to define custom subnet. All packets on the cust… |
| 1.3.6.1.4.1.28097.1.1.2 | Nodebridge-mode | |||
| 1.3.6.1.4.1.28097.1.1.2.1 | Scalarbridge-modeLinkStatus | read-only | current | MAX-ACCESS POINT's connection status. |
| 1.3.6.1.4.1.28097.1.1.2.2 | Scalarbridge-modeMacAP | read-only | current | MAX-ACCESS POINT's MAC ADDRESS we are connected with. |
| 1.3.6.1.4.1.28097.1.1.2.3 | Scalarbridge-modeRSSI | read-only | current | MAX-ACCESS POINT's connection RSSI. |
| 1.3.6.1.4.1.28097.1.1.2.4 | Scalarbridge-modeRSSIdBm | read-only | current | Connection's RSSI in dBm. |
| 1.3.6.1.4.1.28097.1.1.2.5 | Scalarbridge-modeRSSIPercent | read-only | current | Connection's RSSI in percent. |
| 1.3.6.1.4.1.28097.1.1.2.6 | Scalarbridge-modeCurrentTxRate | read-only | current | Current communication speed in bits per second. |
| 1.3.6.1.4.1.28097.1.1.2.7 | Scalarbridge-WirelessMode | read-write | current | Select the Wireless mode. Infrastructure mode require an access point. |
| 1.3.6.1.4.1.28097.1.1.2.8 | NodebridgeAPFiltering | |||
| 1.3.6.1.4.1.28097.1.1.2.8.1 | ScalarbridgeAPFilteringEnable | read-write | current | Enable or Disable AP Filtering. |
| 1.3.6.1.4.1.28097.1.1.2.8.2 | ScalarbridgeAPFilteringMode | read-write | current | Select AP Filtering Mode (allow/Deny) |
| 1.3.6.1.4.1.28097.1.1.2.8.3 | ScalarbridgeAPFilteringMACAddress | read-write | current | MAC address field |
| 1.3.6.1.4.1.28097.1.1.2.8.4 | ScalarbridgeAPFilteringName | read-write | current | Name Field |
| 1.3.6.1.4.1.28097.1.1.2.8.5 | ScalarbridgeAPFilteringSave | read-write | current | write 1 to save the rule |
| 1.3.6.1.4.1.28097.1.1.2.8.6 | ScalarbridgeAPFilteringDelete | read-write | current | when writed, delete the rule which is indexed by the written value |
| 1.3.6.1.4.1.28097.1.1.2.8.7 | ScalarbridgeAPFilteringEnableRule | read-write | current | when writed, enable the rule which is indexed by the written value |
| 1.3.6.1.4.1.28097.1.1.2.8.8 | ScalarbridgeAPFilteringDisableRule | read-write | current | when writed, disable the rule which is indexed by the written value |
| 1.3.6.1.4.1.28097.1.1.2.8.9 | TablebridgeAPFilteringTable | not-accessible | current | Significant only in MAX-ACCESS POINT mode. This table shows information bridge AP filtering rules list. |
| 1.3.6.1.4.1.28097.1.1.2.8.9.1 | RowbridgeAPFilteringEntry | not-accessible | current | Shows information of the rule. |
| 1.3.6.1.4.1.28097.1.1.2.8.9.1.1 | ColumnbridgeAPFilteringListId | read-only | current | Rule index. |
| 1.3.6.1.4.1.28097.1.1.2.8.9.1.2 | ColumnbridgeAPFilteringListName | read-only | current | Show rule's name |
| 1.3.6.1.4.1.28097.1.1.2.8.9.1.3 | ColumnbridgeAPFilteringListMAC | read-only | current | MAC address of the client. |
| 1.3.6.1.4.1.28097.1.1.2.8.9.1.4 | ColumnbridgeAPFilteringListEnable | read-only | current | Show if a rule is enabled or not. |
| 1.3.6.1.4.1.28097.1.1.2.9 | NodebridgeRoaming | |||
| 1.3.6.1.4.1.28097.1.1.2.9.1 | NodebridgeRoamingAdvanced | |||
| 1.3.6.1.4.1.28097.1.1.2.9.1.1 | ScalarbridgeRoamingAdvancedScanThreshold-dbm | read-write | current | Allows to configure the RSSI scan threshold (in dBm, or in percent) from which the access point active scan will start. The access point active scan process lo… |
| 1.3.6.1.4.1.28097.1.1.2.9.1.2 | ScalarbridgeRoamingAdvancedScanThreshold-percent | read-write | current | Allows to configure the RSSI scan threshold (in dBm, or in percent) from which the access point active scan will start. The access point active scan process lo… |
| 1.3.6.1.4.1.28097.1.1.2.9.1.3 | ScalarbridgeRoamingAdvancedScanPeriod | read-write | current | Allow to configure the time between two scan. Reduce this time increase the Access Point discover, but decrease the bandwith if you used more one channel. |
| 1.3.6.1.4.1.28097.1.1.2.9.1.4 | ScalarbridgeRoamingAdvancedScanDuration | read-write | current | Allow to configure the duration while the bridge waiting the Access Point answer. Reduce this duration increase the Bandwith when you used more one channel, bu… |
| 1.3.6.1.4.1.28097.1.1.2.9.1.5 | ScalarbridgeRoamingAdvancedAPLossDetection | read-write | current | If nothing is received from the AP during a certain amount of time, it will be considered unreachable. This amount of time is computed as: 'AP timeout' = 'AP l… |
| 1.3.6.1.4.1.28097.1.1.2.9.2 | ScalarbridgeRoamingEnable | read-write | current | Roaming enables WiFi clients to roam among AP when WiFi RSSI of the current AP becomes weak. This radio button enables/disables the roaming capabilities of the… |
| 1.3.6.1.4.1.28097.1.1.2.9.3 | ScalarbridgeRoamingRSSIThreshold-dBm | read-write | current | Allows to configure the RSSI roaming threshold (in dBm, or percent) from which the roaming algorithm (to find a better AP) will start. AP changing will only be… |
| 1.3.6.1.4.1.28097.1.1.2.9.4 | ScalarbridgeRoamingRSSIThreshold-percent | read-write | current | Allows to configure the RSSI roaming threshold (in dBm, or percent) from which the roaming algorithm (to find a better AP) will start. AP changing will only be… |
| 1.3.6.1.4.1.28097.1.1.2.10 | ScalarbridgeChannelList | read-write | current | A wireless network uses specific channels in the 2.4GHz or 5GHz wireless spectrum to handle communication between clients. Some channels in your area may have … |
| 1.3.6.1.4.1.28097.1.1.2.11 | NodebridgeWirelessScan | |||
| 1.3.6.1.4.1.28097.1.1.2.11.1 | TablebridgeWileressScanTable | not-accessible | current | Significant only in MAX-ACCESS POINT mode. This table shows information AP bridge filtering rules list. |
| 1.3.6.1.4.1.28097.1.1.2.11.1.1 | RowbridgeWirelessScanEntry | not-accessible | current | Shows information of the rule. |
| 1.3.6.1.4.1.28097.1.1.2.11.1.1.1 | ColumnbridgeWirelessScanAPMac | read-only | current | MAC address of the access point. |
| 1.3.6.1.4.1.28097.1.1.2.11.1.1.2 | ColumnbridgeWirelessScanSSID | read-only | current | |
| 1.3.6.1.4.1.28097.1.1.2.11.1.1.3 | ColumnbridgeWirelessScanChannel | read-only | current | |
| 1.3.6.1.4.1.28097.1.1.2.11.1.1.4 | ColumnbridgeWirelessScanMode | read-only | current | Show AP's IEEE 802.11x compatibility mode. |
| 1.3.6.1.4.1.28097.1.1.2.11.1.1.5 | ColumnbridgeWirelessScanSecurity | read-only | current | |
| 1.3.6.1.4.1.28097.1.1.2.11.1.1.6 | ColumnbridgeWirelessScanRssi | read-only | current | |
| 1.3.6.1.4.1.28097.1.1.2.12 | NodebridgeNAT | |||
| 1.3.6.1.4.1.28097.1.1.2.12.1 | ScalarbrigeNATStatus | read-write | current | Enable / disable NAT |
| 1.3.6.1.4.1.28097.1.1.2.12.2 | ScalarbrigeNATEnablePing | read-write | current | Enable / disable ping response from WAN |
| 1.3.6.1.4.1.28097.1.1.2.12.3 | ScalarbrigeNATEnableProductWebServer | read-write | current | Enable / disable the internal web server from WAN |
| 1.3.6.1.4.1.28097.1.1.2.12.4 | ScalarbrigeNATInternalWebServerPort | read-write | current | TCP port used by internal web server from WAN |
| 1.3.6.1.4.1.28097.1.1.2.12.5 | ScalarbrigeNATEnableProductSnmpServer | read-write | current | Enable / disable the internal snmp server from WAN |
| 1.3.6.1.4.1.28097.1.1.2.12.6 | ScalarbrigeNATInternalWebSnmpPort | read-write | current | TCP port used by internal snmp server from WAN |
| 1.3.6.1.4.1.28097.1.1.2.12.7 | ScalarbrigeNATWanIpAddrMode | read-write | current | Ip address mode on wan side |
| 1.3.6.1.4.1.28097.1.1.2.12.8 | ScalarbrigeNATWanIpAddr | read-write | current | Static Ip address on wan side |
| 1.3.6.1.4.1.28097.1.1.2.12.9 | ScalarbrigeNATWanSubnetMask | read-write | current | Subnet mask on wan side |
| 1.3.6.1.4.1.28097.1.1.2.12.10 | ScalarbrigeNATWanGateway | read-write | current | Gateway ip address on wan side |
| 1.3.6.1.4.1.28097.1.1.2.12.11 | NodebridgeNatPortForwarding | |||
| 1.3.6.1.4.1.28097.1.1.2.12.11.1 | TablebridgeNatPortForwardingTable | not-accessible | current | This table show information on port forwading rules |
| 1.3.6.1.4.1.28097.1.1.2.12.11.1.1 | RowbridgeNatPortForwardingEntry | not-accessible | current | shows information of rule. |
| 1.3.6.1.4.1.28097.1.1.2.12.11.1.1.1 | ColumnbridgeNatPortForwardingListId | read-only | current | Rule index |
| 1.3.6.1.4.1.28097.1.1.2.12.11.1.1.2 | ColumnbridgeNatPortForwardingListName | read-only | current | Show rule's name |
| 1.3.6.1.4.1.28097.1.1.2.12.11.1.1.3 | ColumnbridgeNatPortForwardingListIpAddr | read-only | current | Show ipaddress to forward data |
| 1.3.6.1.4.1.28097.1.1.2.12.11.1.1.4 | ColumnbridgeNatPortForwardingListPublicTcpPort | read-only | current | Show public TCP port |
| 1.3.6.1.4.1.28097.1.1.2.12.11.1.1.5 | ColumnbridgeNatPortForwardingListPrivateTcpPort | read-only | current | Show private TCP port |
| 1.3.6.1.4.1.28097.1.1.2.12.11.1.1.6 | ColumnbridgeNatPortForwardingListPublicUdpPort | read-only | current | Show public TCP port |
| 1.3.6.1.4.1.28097.1.1.2.12.11.1.1.7 | ColumnbridgeNatPortForwardingListPrivateUdpPort | read-only | current | Show private TCP port |
| 1.3.6.1.4.1.28097.1.1.2.12.11.1.1.8 | ColumnbridgeNatPortForwardingListEnable | read-only | current | Rule state |
| 1.3.6.1.4.1.28097.1.1.2.12.11.2 | ScalarbridgeNatPortForwardingName | read-write | current | Show rule's name |
| 1.3.6.1.4.1.28097.1.1.2.12.11.3 | ScalarbridgeNatPortForwardingIpAddr | read-write | current | Show ipaddress to forward data |
| 1.3.6.1.4.1.28097.1.1.2.12.11.4 | ScalarbridgeNatPortForwardingPublicTcpPort | read-write | current | Show public TCP port |
| 1.3.6.1.4.1.28097.1.1.2.12.11.5 | ScalarbridgeNatPortForwardingPrivateTcpPort | read-write | current | Show private TCP port |
| 1.3.6.1.4.1.28097.1.1.2.12.11.6 | ScalarbridgeNatPortForwardingPublicUdpPort | read-write | current | Show public TCP port |
| 1.3.6.1.4.1.28097.1.1.2.12.11.7 | ScalarbridgeNatPortForwardingPrivateUdpPort | read-write | current | Show private TCP port |
| 1.3.6.1.4.1.28097.1.1.2.12.11.8 | ScalarbridgeNatPortForwardingEnableRule | read-write | current | when writed, enable the rule which is indexed by the written value |
| 1.3.6.1.4.1.28097.1.1.2.12.11.9 | ScalarbridgeNatPortForwardingDisableRule | read-write | current | when writed, disable the rule which is indexed by the written value |
| 1.3.6.1.4.1.28097.1.1.2.12.11.10 | ScalarbridgeNatPortForwardingSaveRule | read-write | current | when writed, save the rule which is indexed by the written value |
| 1.3.6.1.4.1.28097.1.1.2.12.11.11 | ScalarbridgeNatPortForwardingDeleteRule | read-write | current | when writed, delete the rule which is indexed by the written value |
| 1.3.6.1.4.1.28097.1.1.3 | Nodeaccess-point-mode | |||
| 1.3.6.1.4.1.28097.1.1.3.1 | TableapClientTable | not-accessible | current | Significant only in MAX-ACCESS POINT mode. This table shows information about connected clients. |
| 1.3.6.1.4.1.28097.1.1.3.1.1 | RowapClientEntry | not-accessible | current | Shows information about the connected client. |
| 1.3.6.1.4.1.28097.1.1.3.1.1.1 | ColumnclientMacAddr | read-only | current | MAC address of the client connected to the MAX-ACCESS POINT. |
| 1.3.6.1.4.1.28097.1.1.3.1.1.2 | Columnclient80211Mode | read-only | current | Show client's IEEE 802.11x compatibility mode. |
| 1.3.6.1.4.1.28097.1.1.3.1.1.3 | ColumnclientTxRate | read-only | current | Client's communication speed in bits per second |
| 1.3.6.1.4.1.28097.1.1.3.1.1.4 | ColumnclientRssiPercent | read-only | current | Client's RSSI (percent) |
| 1.3.6.1.4.1.28097.1.1.3.2 | ScalarapAutomaticChannel | read-write | current | Enable / disable the automatic channel select |
| 1.3.6.1.4.1.28097.1.1.3.3 | ScalarapClientCount | read-only | current | count the number of entries in ApClientEntry |
| 1.3.6.1.4.1.28097.1.1.3.4 | NodeapClientFiltering | |||
| 1.3.6.1.4.1.28097.1.1.3.4.1 | ScalarapClientFilteringEnable | read-write | current | Enable / Disable Client Filtering. |
| 1.3.6.1.4.1.28097.1.1.3.4.2 | ScalarapClientFilteringMode | read-write | current | Select Client Filtering Mode (allow/Deny) |
| 1.3.6.1.4.1.28097.1.1.3.4.3 | ScalarapClientWirelessFiltering | read-write | current | Enable or disable Wireless client filtering |
| 1.3.6.1.4.1.28097.1.1.3.4.4 | ScalarapClientWiredFiltering | read-write | current | Enable or disable Wireless client filtering |
| 1.3.6.1.4.1.28097.1.1.3.4.5 | ScalarapClientFilteringMACAddress | read-write | current | MAC address field |
| 1.3.6.1.4.1.28097.1.1.3.4.6 | ScalarapClientFilteringName | read-write | current | Name Field |
| 1.3.6.1.4.1.28097.1.1.3.4.7 | ScalarapClientFilteringSave | read-write | current | write 1 to save the rule |
| 1.3.6.1.4.1.28097.1.1.3.4.8 | ScalarapClientFilteringDelete | read-write | current | when writed, delete the rule which is indexed by the written value |
| 1.3.6.1.4.1.28097.1.1.3.4.9 | ScalarapClientFilteringEnableRule | read-write | current | when writed, enable the rule which is indexed by the written value |
| 1.3.6.1.4.1.28097.1.1.3.4.10 | ScalarapClientFilteringDisableRule | read-write | current | when writed, disable the rule which is indexed by the written value |
| 1.3.6.1.4.1.28097.1.1.3.4.11 | TableapClientFilteringTable | not-accessible | current | Significant only in MAX-ACCESS POINT mode. This table shows information AP bridge filtering rules list. |
| 1.3.6.1.4.1.28097.1.1.3.4.11.1 | RowapClientFilteringEntry | not-accessible | current | Shows information of the rule. |
| 1.3.6.1.4.1.28097.1.1.3.4.11.1.1 | ColumnapClientFilteringListId | read-only | current | Rule index. |
| 1.3.6.1.4.1.28097.1.1.3.4.11.1.2 | ColumnapClientFilteringListName | read-only | current | Show rule's name |
| 1.3.6.1.4.1.28097.1.1.3.4.11.1.3 | ColumnapClientFilteringListMAC | read-only | current | MAC address of the client. |
| 1.3.6.1.4.1.28097.1.1.3.4.11.1.4 | ColumnapClientFilteringListEnable | read-only | current | Show if the rule is enabled or not |
| 1.3.6.1.4.1.28097.1.1.3.5 | Nodewds | |||
| 1.3.6.1.4.1.28097.1.1.3.5.1 | ScalarapWDSEnable | read-write | current | Enable or Disable WDS. |
| 1.3.6.1.4.1.28097.1.1.3.5.2 | ScalarapWDSEnableSTP | read-write | current | Enable or Disable STP when WDS is on |
| 1.3.6.1.4.1.28097.1.1.3.5.3 | ScalarapWDSMAC1 | read-write | current | First AP mac address |
| 1.3.6.1.4.1.28097.1.1.3.5.4 | ScalarapWDSMAC2 | read-write | current | Second AP mac address |
| 1.3.6.1.4.1.28097.1.1.3.5.5 | ScalarapWDSMAC3 | read-write | current | Third AP mac address |
| 1.3.6.1.4.1.28097.1.1.3.5.6 | ScalarapWDSMAC4 | read-write | current | fourth AP mac address |
| 1.3.6.1.4.1.28097.1.1.3.5.7 | ScalarapWDSMAC5 | read-write | current | fith AP mac address |
| 1.3.6.1.4.1.28097.1.1.3.5.8 | ScalarapWDSMAC6 | read-write | current | sixth AP mac address |
| 1.3.6.1.4.1.28097.1.1.3.6 | ScalarsettingSSIDVisibility | read-write | current | Enable or Disable SSID Visibility |
| 1.3.6.1.4.1.28097.1.1.3.7 | ScalarenableSTP | read-write | current | Enable / disable STP protocol. |
| 1.3.6.1.4.1.28097.1.1.3.8 | NodelanTimeOutSettings | |||
| 1.3.6.1.4.1.28097.1.1.3.8.1 | ScalarenableLanTimeout | read-write | current | Enable / disable LAN timeout. ACCESS POINT can be configured to auto-disconnect the radio when the LAN is disconnected from the equipment. |
| 1.3.6.1.4.1.28097.1.1.3.8.2 | ScalarlanTimeoutIPSurvey | read-write | current | Define the IP address where the probe was be sent. |
| 1.3.6.1.4.1.28097.1.1.3.8.3 | ScalarlanTimeoutMaxProbe | read-write | current | Define the number of probe without response necessairy to disconnect the radio. |
| 1.3.6.1.4.1.28097.1.1.3.8.4 | ScalarlanTimeoutProbeTimeout | read-write | current | Define the probe response waiting time in seconds. |
| 1.3.6.1.4.1.28097.1.1.3.8.5 | ScalarlanTimeoutProbeInterval | read-write | current | Define the times in seconds between each probes. |
| 1.3.6.1.4.1.28097.1.1.4 | NodeadvancedSettings | |||
| 1.3.6.1.4.1.28097.1.1.4.1 | NodelongDistanceSettings | |||
| 1.3.6.1.4.1.28097.1.1.4.1.1 | ScalarenableLongDistance | read-write | current | Enable / disable distance parameter. |
| 1.3.6.1.4.1.28097.1.1.4.1.2 | ScalardistanceAntennaMeter | read-write | current | Set the distance between antenna in meter. |
| 1.3.6.1.4.1.28097.1.1.4.1.3 | ScalardistanceSlotTime | read-write | current | |
| 1.3.6.1.4.1.28097.1.1.4.1.4 | ScalardistanceAckTimeout | read-write | current | |
| 1.3.6.1.4.1.28097.1.1.4.1.5 | ScalardistanceCtsTimeout | read-write | current | |
| 1.3.6.1.4.1.28097.1.1.4.2 | Scalarenable802-11d | read-write | current | Enable / disable the 802.11d. |
| 1.3.6.1.4.1.28097.1.1.4.3 | ScalarenableIsolateSTA | read-write | current | Enable / disable the isolating access point. |
| 1.3.6.1.4.1.28097.1.2 | Nodeadministration | |||
| 1.3.6.1.4.1.28097.1.2.1 | ScalaradminReset | read-write | current | Writing 1 resets the product. This must be done after each configuration change. |
| 1.3.6.1.4.1.28097.1.2.2 | ScalaradminResetFactory | read-write | current | Writing 1 resets the product to the factory settings. |
| 1.3.6.1.4.1.28097.1.2.3 | ScalaradminEnableWebServer | read-write | current | Enable or Disable internal webserver. |
| 1.3.6.1.4.1.28097.1.2.4 | ScalaradminAutoSave | read-write | current | Enable or Disable the automatic change saving. When this function is disable, the modification is not save automaticaly after change and certainly OID is appli… |
| 1.3.6.1.4.1.28097.1.2.5 | ScalaradminSave | read-write | current | Write 1 to save the modification in flash. Read this OID to know if a save is require. |
| 1.3.6.1.4.1.28097.1.3 | Nodeos-stat | |||
| 1.3.6.1.4.1.28097.1.3.1 | Scalaros-statFreeHeap | read-only | current | The amount of memory currently available, measured in bytes. |
| 1.3.6.1.4.1.28097.1.3.2 | Scalaros-statTotalHeap | read-only | current | The total size of the heap, measured in bytes. |
| 1.3.6.1.4.1.28097.1.3.3 | Scalaros-statHeapLowWater | read-only | current | Low water mark for the heap. Writing any value this variable will always reset the low water to the total heap size. |
| 1.3.6.1.4.1.28097.1.3.4 | Scalaros-statNetpageFree | read-only | current | The amount of netpages currently available, measured in bytes. |
| 1.3.6.1.4.1.28097.1.3.5 | Scalaros-statNetpageLowWater | read-only | current | Low water mark for the netpage. |
| 1.3.6.1.4.1.28097.1.4 | NodeproductSpecific | |||
| 1.3.6.1.4.1.28097.1.4.1 | Nodewlg-aboard | |||
| 1.3.6.1.4.1.28097.1.4.1.1 | Scalarwlg-aboard-PW1-state | read-only | obsolete | Power 1 state |
| 1.3.6.1.4.1.28097.1.4.1.2 | Scalarwlg-aboard-PW2-state | read-only | obsolete | Power 2 state |
| 1.3.6.1.4.1.28097.1.5 | NodelanInterface | |||
| 1.3.6.1.4.1.28097.1.5.1 | ScalarlanInterfaceIpAddrMode | read-write | current | Static or DHCP Ip settings |
| 1.3.6.1.4.1.28097.1.5.2 | ScalarlanInterfaceIpAddr | read-write | current | Product IP address |
| 1.3.6.1.4.1.28097.1.5.3 | ScalarlanInterfaceSubNetMask | read-write | current | Network mask |
| 1.3.6.1.4.1.28097.1.5.4 | ScalarlanInterfaceGatewayIp | read-write | current | IP gateway |
| 1.3.6.1.4.1.28097.1.5.5 | ScalarlanInterfaceHostName | read-write | current | Adresse IP de la gateway |
| 1.3.6.1.4.1.28097.1.5.6 | ScalarlanInterfaceLocalDomainName | read-write | current | Adresse IP de la gateway |
| 1.3.6.1.4.1.28097.2 | IdentityacksysMIB | SNMPv2C Module for ACKSYS Solutions | ||
| 1.3.6.1.4.1.28097.3 | ScalaracksysProductID | read-only | current | Return the product Id code |
| 1.3.6.1.4.1.28097.4 | Nodec-key-management | |||
| 1.3.6.1.4.1.28097.4.1 | ScalarckeyManagementCopySettingTo | read-write | current | Write 1 to copy the current settings to the C-KEY. After this action, all previous data in the C-KEY are lost. |
| 1.3.6.1.4.1.28097.4.2 | ScalarckeyManagementCopySettingFrom | read-write | current | Write 1 to copy the product settings from the C-KEY. After this action, the product has C-KEY settings. Reboot your device to apply the new settings. |
| 1.3.6.1.4.1.28097.5 | NodealarmSettings | |||
| 1.3.6.1.4.1.28097.5.1 | ScalaralarmSettingsTest | read-write | current | Allow to get and set the Alarm output status. |
| 1.3.6.1.4.1.28097.5.2 | NodealarmSettingsPower1Down | |||
| 1.3.6.1.4.1.28097.5.2.1 | ScalaralarmSettingsPower1DownEnable | read-write | current | |
| 1.3.6.1.4.1.28097.5.2.2 | ScalaralarmSettingsPower1DownEnableAutomaticReset | read-write | current | |
| 1.3.6.1.4.1.28097.5.2.3 | ScalaralarmSettingsPower1DownStatus | read-write | current | Read to know the alarm source status (disable / enable ) Write 3 to acknowledge the alarm source. |
| 1.3.6.1.4.1.28097.5.3 | NodealarmSettingsPower2Down | |||
| 1.3.6.1.4.1.28097.5.3.1 | ScalaralarmSettingsPower2DownEnable | read-write | current | |
| 1.3.6.1.4.1.28097.5.3.2 | ScalaralarmSettingsPower2DownEnableAutomaticReset | read-write | current | |
| 1.3.6.1.4.1.28097.5.3.3 | ScalaralarmSettingsPower2DownStatus | read-write | current | Read to know the alarm source status (disable / enable ) Write 3 to acknowledge the alarm source. |
| 1.3.6.1.4.1.28097.5.4 | NodealarmSettingsLan1Down | |||
| 1.3.6.1.4.1.28097.5.4.1 | ScalaralarmSettingsLan1DownEnable | read-write | current | |
| 1.3.6.1.4.1.28097.5.4.2 | ScalaralarmSettingsLan1DownEnableAutomaticReset | read-write | current | |
| 1.3.6.1.4.1.28097.5.4.3 | ScalaralarmSettingsLan1DownStatus | read-write | current | Read to know the alarm source status (disable / enable ) Write 3 to acknowledge the alarm source. |
| 1.3.6.1.4.1.28097.5.5 | NodealarmSettingsLan2Down | |||
| 1.3.6.1.4.1.28097.5.5.1 | ScalaralarmSettingsLan2DownEnable | read-write | current | |
| 1.3.6.1.4.1.28097.5.5.2 | ScalaralarmSettingsLan2DownEnableAutomaticReset | read-write | current | |
| 1.3.6.1.4.1.28097.5.5.3 | ScalaralarmSettingsLan2DownStatus | read-write | current | Read to know the alarm source status (disable / enable ) Write 3 to acknowledge the alarm source. |
| 1.3.6.1.4.1.28097.5.6 | NodealarmSettingsLan3Down | |||
| 1.3.6.1.4.1.28097.5.6.1 | ScalaralarmSettingsLan3DownEnable | read-write | current | |
| 1.3.6.1.4.1.28097.5.6.2 | ScalaralarmSettingsLan3DownEnableAutomaticReset | read-write | current | |
| 1.3.6.1.4.1.28097.5.6.3 | ScalaralarmSettingsLan3DownStatus | read-write | current | Read to know the alarm source status (disable / enable ) Write 3 to acknowledge the alarm source. |
| 1.3.6.1.4.1.28097.5.7 | NodealarmSettingsLan4Down | |||
| 1.3.6.1.4.1.28097.5.7.1 | ScalaralarmSettingsLan4DownEnable | read-write | current | |
| 1.3.6.1.4.1.28097.5.7.2 | ScalaralarmSettingsLan4DownEnableAutomaticReset | read-write | current | |
| 1.3.6.1.4.1.28097.5.7.3 | ScalaralarmSettingsLan4DownStatus | read-write | current | Read to know the alarm source status (disable / enable ) Write 3 to acknowledge the alarm source. |
| 1.3.6.1.4.1.28097.5.8 | NodealarmSettingsLan5Down | |||
| 1.3.6.1.4.1.28097.5.8.1 | ScalaralarmSettingsLan5DownEnable | read-write | current | |
| 1.3.6.1.4.1.28097.5.8.2 | ScalaralarmSettingsLan5DownEnableAutomaticReset | read-write | current | |
| 1.3.6.1.4.1.28097.5.8.3 | ScalaralarmSettingsLan5DownStatus | read-write | current | Read to know the alarm source status (disable / enable ) Write 3 to acknowledge the alarm source. |
| 1.3.6.1.4.1.28097.5.9 | NodealarmSettingsLan6Down | |||
| 1.3.6.1.4.1.28097.5.9.1 | ScalaralarmSettingsLan6DownEnable | read-write | current | |
| 1.3.6.1.4.1.28097.5.9.2 | ScalaralarmSettingsLan6DownEnableAutomaticReset | read-write | current | |
| 1.3.6.1.4.1.28097.5.9.3 | ScalaralarmSettingsLan6DownStatus | read-write | current | Read to know the alarm source status (disable / enable ) Write 3 to acknowledge the alarm source. |
| 1.3.6.1.4.1.28097.5.10 | NodealarmSettingsLan7Down | |||
| 1.3.6.1.4.1.28097.5.10.1 | ScalaralarmSettingsLan7DownEnable | read-write | current | |
| 1.3.6.1.4.1.28097.5.10.2 | ScalaralarmSettingsLan7DownEnableAutomaticReset | read-write | current | |
| 1.3.6.1.4.1.28097.5.10.3 | ScalaralarmSettingsLan7DownStatus | read-write | current | Read to know the alarm source status (disable / enable ) Write 3 to acknowledge the alarm source. |
| 1.3.6.1.4.1.28097.5.11 | NodealarmSettingsLan8Down | |||
| 1.3.6.1.4.1.28097.5.11.1 | ScalaralarmSettingsLan8DownEnable | read-write | current | |
| 1.3.6.1.4.1.28097.5.11.2 | ScalaralarmSettingsLan8DownEnableAutomaticReset | read-write | current | |
| 1.3.6.1.4.1.28097.5.11.3 | ScalaralarmSettingsLan8DownStatus | read-write | current | Read to know the alarm source status (disable / enable ) Write 3 to acknowledge the alarm source. |
| 1.3.6.1.4.1.28097.5.12 | NodealarmSettingsWLANDown | |||
| 1.3.6.1.4.1.28097.5.12.1 | ScalaralarmSettingsWLANDownEnable | read-write | current | |
| 1.3.6.1.4.1.28097.5.12.2 | ScalaralarmSettingsWLANDownEnableAutomaticReset | read-write | current | |
| 1.3.6.1.4.1.28097.5.12.3 | ScalaralarmSettingsWLANDownStatus | read-write | current | Read to know the alarm source status (disable / enable ) Write 3 to acknowledge the alarm source. |
| 1.3.6.1.4.1.28097.6 | NodepowerStatus | |||
| 1.3.6.1.4.1.28097.6.1 | ScalarpowerStatus-PW1-state | read-only | current | Power 1 state |
| 1.3.6.1.4.1.28097.6.2 | ScalarpowerStatus-PW2-state | read-only | current | Power 2 state |