ACS8000-MIB
496 objects
This module defines the MIB extensions to ACS80xx products.
Imported Objects
| IF-MIB | InterfaceIndex InterfaceIndexOrZero |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter Gauge IpAddress NetworkAddress TimeTicks |
| RFC1213-MIB | PhysAddress |
| SNMPv2-SMI | enterprises Integer32 MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.10418.26 | Identityacs | This module defines the MIB extensions to ACS80xx products. | ||
| 1.3.6.1.4.1.10418.26.1 | NodeacsProducts | |||
| 1.3.6.1.4.1.10418.26.1.1 | Nodeacs8048 | |||
| 1.3.6.1.4.1.10418.26.1.2 | Nodeacs8032 | |||
| 1.3.6.1.4.1.10418.26.1.3 | Nodeacs8016 | |||
| 1.3.6.1.4.1.10418.26.1.4 | Nodeacs8008 | |||
| 1.3.6.1.4.1.10418.26.1.5 | Nodeacs808 | |||
| 1.3.6.1.4.1.10418.26.1.6 | Nodeacs804 | |||
| 1.3.6.1.4.1.10418.26.1.7 | Nodeacs802 | |||
| 1.3.6.1.4.1.10418.26.2 | NodeacsManagement | |||
| 1.3.6.1.4.1.10418.26.2.1 | NodeacsAppliance | |||
| 1.3.6.1.4.1.10418.26.2.1.1 | ScalaracsHostName | read-only | current | The appliance name |
| 1.3.6.1.4.1.10418.26.2.1.2 | ScalaracsProductModel | read-only | current | The appliance product model |
| 1.3.6.1.4.1.10418.26.2.1.3 | ScalaracsPartNumber | read-only | current | The part number of this appliance as shown on the label attached or imprinted on the appliance. |
| 1.3.6.1.4.1.10418.26.2.1.4 | ScalaracsSerialNumber | read-only | current | The serial number of this appliance as shown on the label attached or imprinted on the appliance. |
| 1.3.6.1.4.1.10418.26.2.1.5 | ScalaracsEIDNumber | read-only | current | The electronic ID number (EID) of this appliance as shown on the label attached or imprinted on the appliance. |
| 1.3.6.1.4.1.10418.26.2.1.6 | ScalaracsBootcodeVersion | read-only | current | The version of the bootcode of this appliance. |
| 1.3.6.1.4.1.10418.26.2.1.7 | ScalaracsFirmwareVersion | read-only | current | The version of the firmware of this appliance. |
| 1.3.6.1.4.1.10418.26.2.1.8 | IdentityacsPowerSupply | current | It gives information about Power Supply of this appliance | |
| 1.3.6.1.4.1.10418.26.2.1.8.1 | ScalaracsPowerSupplyNumber | read-only | current | Number of the power supplies of this appliance |
| 1.3.6.1.4.1.10418.26.2.1.8.2 | ScalaracsPowerSupplyStatePw1 | read-only | current | State of the first power supply |
| 1.3.6.1.4.1.10418.26.2.1.8.3 | ScalaracsPowerSupplyStatePw2 | read-only | current | State of the second power supply |
| 1.3.6.1.4.1.10418.26.2.1.9 | ScalaracsReboot | read-write | current | A set value of reboot(2) will reboot the appliance. noAction(1) = always returned in a GET. Does nothing if SET. reboot(2) = when SET the appliance immediately… |
| 1.3.6.1.4.1.10418.26.2.1.10 | TableacsScheduledTasksTable | not-accessible | current | This table contains the list of the scheduled tasks. |
| 1.3.6.1.4.1.10418.26.2.1.10.1 | RowacsScheduledTasksTableEntry | not-accessible | current | each entry has the information about the scheduled task |
| 1.3.6.1.4.1.10418.26.2.1.10.1.1 | ColumnacsScheduledTasksTableIndex | read-only | current | A unique index representing an entry in this table. |
| 1.3.6.1.4.1.10418.26.2.1.10.1.2 | ColumnacsScheduledTasksTableType | read-only | current | The type of the scheduled task. |
| 1.3.6.1.4.1.10418.26.2.1.10.1.3 | ColumnacsScheduledTasksTableName | read-only | current | Name of the scheduled task. |
| 1.3.6.1.4.1.10418.26.2.1.10.1.4 | ColumnacsScheduledTasksTableStatus | read-write | current | When set to enabled, the task will be run according to the schedule defined by acsScheduledTasksTableFrequency. |
| 1.3.6.1.4.1.10418.26.2.1.10.1.5 | ColumnacsScheduledTasksTableFrequency | read-write | current | This object defines how often the task will be run. When set to hourly(1), the task will be run every hour. When set to daily(2), the task will be run every da… |
| 1.3.6.1.4.1.10418.26.2.1.10.1.6 | ColumnacsScheduledTasksTableDay | read-write | current | Only used if acsScheduledTasksTableFrequency is set to weekly(3). The task will be run every week on this day, at the time specified by acsScheduledTasksTableT… |
| 1.3.6.1.4.1.10418.26.2.1.10.1.7 | ColumnacsScheduledTasksTableDate | read-write | current | Only used if acsScheduledTasksTableFrequency is set to monthly(4). The task will be run every month on this day, at the time specified by acsScheduledTasksTabl… |
| 1.3.6.1.4.1.10418.26.2.1.10.1.8 | ColumnacsScheduledTasksTableTime | read-write | current | The time of day the task will run. Format must be HH:MM. |
| 1.3.6.1.4.1.10418.26.2.1.10.1.9 | ColumnacsScheduledTasksTableLastStarted | read-only | current | The timestamp of the last time the task started running. |
| 1.3.6.1.4.1.10418.26.2.1.10.1.10 | ColumnacsScheduledTasksTableLastResult | read-only | current | The result of the last time the task was run. |
| 1.3.6.1.4.1.10418.26.2.1.10.1.11 | ColumnacsScheduledTasksTableScript | read-write | current | The script command used by the task. Only used if acsScheduledTasksTableType is set to custom(1). |
| 1.3.6.1.4.1.10418.26.2.1.10.1.12 | ColumnacsScheduledTasksTableIpAddress | read-write | current | The IP address used by the cell-modem-ip task. Not used by all tasks. |
| 1.3.6.1.4.1.10418.26.2.2 | NodeacsSessions | |||
| 1.3.6.1.4.1.10418.26.2.2.1 | ScalaracsActiveSessionsNumberOfSession | read-only | current | Number of active sessions. |
| 1.3.6.1.4.1.10418.26.2.2.2 | TableacsActiveSessionsTable | not-accessible | current | This table contains the list of active sessions. |
| 1.3.6.1.4.1.10418.26.2.2.2.1 | RowacsActiveSessionsTableEntry | not-accessible | current | each entry has the information about the active session |
| 1.3.6.1.4.1.10418.26.2.2.2.1.1 | ColumnacsActiveSessionsTableIndex | read-only | current | A unique index representing an entry in this table. |
| 1.3.6.1.4.1.10418.26.2.2.2.1.2 | ColumnacsActiveSessionsTableUser | read-only | current | The name of the user that opens this session. |
| 1.3.6.1.4.1.10418.26.2.2.2.1.3 | ColumnacsActiveSessionsTableGroup | read-only | current | The name of the group that the user belongs to. |
| 1.3.6.1.4.1.10418.26.2.2.2.1.4 | ColumnacsActiveSessionsTableType | read-only | current | The session type. |
| 1.3.6.1.4.1.10418.26.2.2.2.1.5 | ColumnacsActiveSessionsTableConnection | read-only | current | Connection type. |
| 1.3.6.1.4.1.10418.26.2.2.2.1.6 | ColumnacsActiveSessionsTableSessionTime | read-only | current | Time of the session |
| 1.3.6.1.4.1.10418.26.2.2.2.1.7 | ColumnacsActiveSessionsTableFrom | read-only | current | The source IP address of the session. |
| 1.3.6.1.4.1.10418.26.2.2.2.1.8 | ColumnacsActiveSessionsTableKill | read-write | current | A set value of killSession(2) will kill the session. noAction(1) = always returned in a GET. Does nothing if SET. killSession(2)= when SET the appliance immedi… |
| 1.3.6.1.4.1.10418.26.2.3 | NodeacsSerialPort | |||
| 1.3.6.1.4.1.10418.26.2.3.1 | ScalaracsSerialPortNumberOfPorts | read-only | current | Number of Serial Ports (physical serial port plus Aux Port. |
| 1.3.6.1.4.1.10418.26.2.3.2 | TableacsSerialPortTable | not-accessible | current | This table contains information about serial ports. |
| 1.3.6.1.4.1.10418.26.2.3.2.1 | RowacsSerialPortTableEntry | not-accessible | current | each entry has the information about specific serial port. |
| 1.3.6.1.4.1.10418.26.2.3.2.1.1 | ColumnacsSerialPortTableNumber | read-only | current | A unique index representing an entry in this table. It is the number of the serial port. For AUX port, the number will be the number of physical serial ports p… |
| 1.3.6.1.4.1.10418.26.2.3.2.1.2 | ColumnacsSerialPortTableDeviceName | read-only | current | The associated device name for the serial port. |
| 1.3.6.1.4.1.10418.26.2.3.2.1.3 | ColumnacsSerialPortTableStatus | read-only | current | The status of the serial port: disabled(1) = it was configured as disable. idle(2) = there is not any session opened in this port. inUse(3) = there is session(… |
| 1.3.6.1.4.1.10418.26.2.3.2.1.4 | ColumnacsSerialPortTableName | read-only | current | Name associated with this serial port. |
| 1.3.6.1.4.1.10418.26.2.3.2.1.5 | ColumnacsSerialPortTableProfile | read-only | current | Configured profile for this serial port. |
| 1.3.6.1.4.1.10418.26.2.3.2.1.6 | ColumnacsSerialPortTablePinOut | read-only | current | RJ45 Pin-out configured for this serial port. |
| 1.3.6.1.4.1.10418.26.2.3.2.1.7 | ColumnacsSerialPortTableComSpeed | read-only | current | Speed configured for this serial port. |
| 1.3.6.1.4.1.10418.26.2.3.2.1.8 | ColumnacsSerialPortTableComParity | read-only | current | Parity configured for this serial port. |
| 1.3.6.1.4.1.10418.26.2.3.2.1.9 | ColumnacsSerialPortTableComDataSize | read-only | current | Data Size configured for this serial port. |
| 1.3.6.1.4.1.10418.26.2.3.2.1.10 | ColumnacsSerialPortTableComStopBits | read-only | current | Number of Stop Bits configured for this serial port. |
| 1.3.6.1.4.1.10418.26.2.3.2.1.11 | ColumnacsSerialPortTableComFlowControl | read-only | current | Flow Control configured for this serial port. |
| 1.3.6.1.4.1.10418.26.2.3.2.1.12 | ColumnacsSerialPortTableSignalStateDTR | read-only | current | State of the DTR RS-232C signal. |
| 1.3.6.1.4.1.10418.26.2.3.2.1.13 | ColumnacsSerialPortTableSignalStateDCD | read-only | current | State of the DCD RS-232C signal. |
| 1.3.6.1.4.1.10418.26.2.3.2.1.14 | ColumnacsSerialPortTableSignalStateRTS | read-only | current | State of the RTS RS-232C signal. |
| 1.3.6.1.4.1.10418.26.2.3.2.1.15 | ColumnacsSerialPortTableSignalStateCTS | read-only | current | State of the CTS RS-232C signal. |
| 1.3.6.1.4.1.10418.26.2.3.2.1.16 | ColumnacsSerialPortTableTxBytes | read-only | current | The number of transmited bytes by the serial port. |
| 1.3.6.1.4.1.10418.26.2.3.2.1.17 | ColumnacsSerialPortTableRxBytes | read-only | current | The number of received bytes by the serial port. |
| 1.3.6.1.4.1.10418.26.2.3.2.1.18 | ColumnacsSerialPortTableFrameError | read-only | current | The number of frame error detected in the serial port. |
| 1.3.6.1.4.1.10418.26.2.3.2.1.19 | ColumnacsSerialPortTableParityError | read-only | current | The number of parity error detected in the serial port. |
| 1.3.6.1.4.1.10418.26.2.3.2.1.20 | ColumnacsSerialPortTableBreak | read-only | current | The number of break detected in the serial port. |
| 1.3.6.1.4.1.10418.26.2.3.2.1.21 | ColumnacsSerialPortTableOverrun | read-only | current | The number of overrun error detected in the serial port. |
| 1.3.6.1.4.1.10418.26.2.3.2.1.22 | ColumnacsSerialPortTableResetCounters | read-write | current | Resets counters for all statistics for this serial port. Resets the countes for TxBytes, RxBytes, frame errors, parity errors, breaks, and overrun errors. |
| 1.3.6.1.4.1.10418.26.2.3.2.1.23 | ColumnacsSerialPortTableXcvrStatus | read-only | current | Activity status of the RS232 transceiver. |
| 1.3.6.1.4.1.10418.26.2.5 | NodeacsPowerMgmt | |||
| 1.3.6.1.4.1.10418.26.2.5.1 | ScalaracsPowerMgmtNumSerialPorts | read-only | current | The number of Serial Ports that has PDU connected on the appliance. |
| 1.3.6.1.4.1.10418.26.2.5.2 | TableacsPowerMgmtSerialTable | not-accessible | current | Information about each serial port thas has PDU connect. |
| 1.3.6.1.4.1.10418.26.2.5.2.1 | RowacsPowerMgmtSerialTableEntry | not-accessible | current | Information about each serial port thas has PDU connect. |
| 1.3.6.1.4.1.10418.26.2.5.2.1.1 | ColumnacsPowerMgmtSerialTableIndex | read-only | current | The index of the register. |
| 1.3.6.1.4.1.10418.26.2.5.2.1.2 | ColumnacsPowerMgmtSerialTablePortNumber | read-only | current | The number of the serial port when the PDU is connected. |
| 1.3.6.1.4.1.10418.26.2.5.2.1.3 | ColumnacsPowerMgmtSerialTableDeviceName | read-only | current | The device name of this serial port. |
| 1.3.6.1.4.1.10418.26.2.5.2.1.4 | ColumnacsPowerMgmtSerialTableNumberPDUs | read-only | current | Total number of units connected in this serial port. |
| 1.3.6.1.4.1.10418.26.2.5.2.1.5 | ColumnacsPowerMgmtSerialTableNumberUPS | read-only | current | Total number of UPS devices connected to this serial port. |
| 1.3.6.1.4.1.10418.26.2.5.3 | TableacsPowerMgmtPDUTable | not-accessible | current | This table contains the list of detected PDUs. |
| 1.3.6.1.4.1.10418.26.2.5.3.1 | RowacsPowerMgmtPDUTableEntry | not-accessible | current | each entry has the information about the PDU. |
| 1.3.6.1.4.1.10418.26.2.5.3.1.1 | ColumnacsPowerMgmtPDUTablePortNumber | read-only | current | Number of serial port when the PDU is connected. |
| 1.3.6.1.4.1.10418.26.2.5.3.1.2 | ColumnacsPowerMgmtPDUTablePduIndex | read-only | current | A PDU position in the chain. |
| 1.3.6.1.4.1.10418.26.2.5.3.1.3 | ColumnacsPowerMgmtPDUTablePduId | read-only | current | PDU identification. |
| 1.3.6.1.4.1.10418.26.2.5.3.1.4 | ColumnacsPowerMgmtPDUTablePortName | read-only | current | Name of serial port when the PDU is connected. |
| 1.3.6.1.4.1.10418.26.2.5.3.1.5 | ColumnacsPowerMgmtPDUTableModel | read-only | current | Model of the PDU. |
| 1.3.6.1.4.1.10418.26.2.5.3.1.6 | ColumnacsPowerMgmtPDUTableVendor | read-only | current | Vendor of the PDU. |
| 1.3.6.1.4.1.10418.26.2.5.3.1.7 | ColumnacsPowerMgmtPDUTableFirmwareVersion | read-only | current | Version of the PDU firmware. |
| 1.3.6.1.4.1.10418.26.2.5.3.1.8 | ColumnacsPowerMgmtPDUTableNumberOfOutlets | read-only | current | Number of outlets of the PDU. |
| 1.3.6.1.4.1.10418.26.2.5.3.1.9 | ColumnacsPowerMgmtPDUTableCurrentNOS | read-only | obsolete | Number of current sensors in the PDU. |
| 1.3.6.1.4.1.10418.26.2.5.3.1.10 | ColumnacsPowerMgmtPDUTableCurrent1Value | read-only | obsolete | Current of the sensor 1 in this PDU unit in AMP. The value of this object is the actual current in AMP * 10. You need to translate the readed value (Ex. : valu… |
| 1.3.6.1.4.1.10418.26.2.5.3.1.11 | ColumnacsPowerMgmtPDUTableCurrent1Max | read-write | obsolete | Maximum current of the sensor 1 in this PDU unit in AMP. When the PDU does not have support for maximum value, the value will be 0. The value of this object is… |
| 1.3.6.1.4.1.10418.26.2.5.3.1.12 | ColumnacsPowerMgmtPDUTableCurrent2Value | read-only | obsolete | Current of the sensor 2 in this PDU unit in AMP. The value of this object is the actual current in AMP * 10. You need to translate the readed value (Ex. : valu… |
| 1.3.6.1.4.1.10418.26.2.5.3.1.13 | ColumnacsPowerMgmtPDUTableCurrent2Max | read-write | obsolete | Maximum current of the sensor 2 in this PDU unit in AMP. When the PDU does not have support for maximum value, the value will be 0. The value of this object is… |
| 1.3.6.1.4.1.10418.26.2.5.3.1.14 | ColumnacsPowerMgmtPDUTableCurrent3Value | read-only | obsolete | Current of the sensor 3 in this PDU unit in AMP. The value of this object is the actual current in AMP * 10. You need to translate the readed value (Ex. : valu… |
| 1.3.6.1.4.1.10418.26.2.5.3.1.15 | ColumnacsPowerMgmtPDUTableCurrent3Max | read-write | obsolete | Maximum current of the sensor 3 in this PDU unit in AMP. When the PDU does not have support for maximum value, the value will be 0. The value of this object is… |
| 1.3.6.1.4.1.10418.26.2.5.3.1.16 | ColumnacsPowerMgmtPDUTableTemperatureNOS | read-only | obsolete | Number of temperature sensors in the PDU. |
| 1.3.6.1.4.1.10418.26.2.5.3.1.17 | ColumnacsPowerMgmtPDUTableTemperature1Value | read-only | obsolete | Temperature of this PM unit in Celsius degrees. The value of this object is the actual temperature in degrees C * 10. You need to translate the readed value (E… |
| 1.3.6.1.4.1.10418.26.2.5.3.1.18 | ColumnacsPowerMgmtPDUTableTemperature1Max | read-write | obsolete | Maximum temperature detected in this PM unit in Celsius degrees. The value will be Zero when the PDU does not have support for maximum value. The value of this… |
| 1.3.6.1.4.1.10418.26.2.5.3.1.19 | ColumnacsPowerMgmtPDUTableTemperature2Value | read-only | obsolete | Temperature of this PM unit in Celsius degrees. The value of this object is the actual temperature in degrees C * 10. You need to translate the readed value (E… |
| 1.3.6.1.4.1.10418.26.2.5.3.1.20 | ColumnacsPowerMgmtPDUTableTemperature2Max | read-write | obsolete | Maximum temperature detected in this PM unit in Celsius degrees. The value will be Zero when the PDU does not have support for maximum value. The value of this… |
| 1.3.6.1.4.1.10418.26.2.5.3.1.21 | ColumnacsPowerMgmtPDUTableTemperature3Value | read-only | obsolete | Temperature of this PM unit in Celsius degrees. The value of this object is the actual temperature in degrees C * 10. You need to translate the readed value (E… |
| 1.3.6.1.4.1.10418.26.2.5.3.1.22 | ColumnacsPowerMgmtPDUTableTemperature3Max | read-write | obsolete | Maximum temperature detected in this PM unit in Celsius degrees. The value will be Zero when the PDU does not have support for maximum value. The value of this… |
| 1.3.6.1.4.1.10418.26.2.5.3.1.23 | ColumnacsPowerMgmtPDUTableHumidityNOS | read-only | obsolete | Number of humidity sensors in the PDU. |
| 1.3.6.1.4.1.10418.26.2.5.3.1.24 | ColumnacsPowerMgmtPDUTableHumidity1Value | read-only | obsolete | Humidity of this PM unit . If the humidity measurement is not installed this value will be 0. |
| 1.3.6.1.4.1.10418.26.2.5.3.1.25 | ColumnacsPowerMgmtPDUTableHumidity1Max | read-write | obsolete | Maximum humidity detected in this PM unit. If the humidity measurement is not installed or the PDU does not have support for maximum value this value will be 0… |
| 1.3.6.1.4.1.10418.26.2.5.3.1.26 | ColumnacsPowerMgmtPDUTableHumidity2Value | read-only | obsolete | Humidity of this PM unit . If the humidity measurement is not installed this value will be 0. |
| 1.3.6.1.4.1.10418.26.2.5.3.1.27 | ColumnacsPowerMgmtPDUTableHumidity2Max | read-write | obsolete | Maximum humidity detected in this PM unit. If the humidity measurement is not installed or the PDU does not have support for maximum value this value will be 0… |
| 1.3.6.1.4.1.10418.26.2.5.3.1.28 | ColumnacsPowerMgmtPDUTableHumidity3Value | read-only | obsolete | Humidity of this PM unit . If the humidity measurement is not installed this value will be 0. |
| 1.3.6.1.4.1.10418.26.2.5.3.1.29 | ColumnacsPowerMgmtPDUTableHumidity3Max | read-write | obsolete | Maximum humidity detected in this PM unit. If the humidity measurement is not installed or the PDU does not have support for maximum value this value will be 0… |
| 1.3.6.1.4.1.10418.26.2.5.3.1.30 | ColumnacsPowerMgmtPDUTableVoltageNOS | read-only | obsolete | Number of voltage sensors in the PDU. |
| 1.3.6.1.4.1.10418.26.2.5.3.1.31 | ColumnacsPowerMgmtPDUTableVoltage1Value | read-only | obsolete | Voltage of this sensor in this PDU unit. |
| 1.3.6.1.4.1.10418.26.2.5.3.1.32 | ColumnacsPowerMgmtPDUTableVoltage1Max | read-write | obsolete | Maximum voltage of this sensor in this PDU unit. Set with Zero value to clear the maximum voltage. |
| 1.3.6.1.4.1.10418.26.2.5.3.1.33 | ColumnacsPowerMgmtPDUTableVoltage2Value | read-only | obsolete | Voltage of this sensor in this PDU unit. |
| 1.3.6.1.4.1.10418.26.2.5.3.1.34 | ColumnacsPowerMgmtPDUTableVoltage2Max | read-write | obsolete | Maximum voltage of this sensor in this PDU unit. Set with Zero value to clear the maximum voltage. |
| 1.3.6.1.4.1.10418.26.2.5.3.1.35 | ColumnacsPowerMgmtPDUTableVoltage3Value | read-only | obsolete | Voltage of this sensor in this PDU unit. |
| 1.3.6.1.4.1.10418.26.2.5.3.1.36 | ColumnacsPowerMgmtPDUTableVoltage3Max | read-write | obsolete | Maximum voltage of this sensor in this PDU unit. Set with Zero value to clear the maximum voltage. |
| 1.3.6.1.4.1.10418.26.2.5.3.1.37 | ColumnacsPowerMgmtPDUTableNumberOfPhases | read-only | current | Number of phases of this PDU unit. |
| 1.3.6.1.4.1.10418.26.2.5.3.1.38 | ColumnacsPowerMgmtPDUTableNumberOfBanks | read-only | current | Number of banks of this PDU unit. |
| 1.3.6.1.4.1.10418.26.2.5.3.1.39 | ColumnacsPowerMgmtPDUTableCurrentValue | read-only | current | Actual value of current sensor in this PDU.( A x 10 ) |
| 1.3.6.1.4.1.10418.26.2.5.3.1.40 | ColumnacsPowerMgmtPDUTableCurrentMax | read-only | current | Max detected value of current sensor in this PDU.( A x 10 ) |
| 1.3.6.1.4.1.10418.26.2.5.3.1.41 | ColumnacsPowerMgmtPDUTableCurrentMin | read-only | current | Min detected value of current sensor in this PDU.( A x 10 ) |
| 1.3.6.1.4.1.10418.26.2.5.3.1.42 | ColumnacsPowerMgmtPDUTableCurrentAvg | read-only | current | Average value for current sensor in this PDU.( A x 10 ) |
| 1.3.6.1.4.1.10418.26.2.5.3.1.43 | ColumnacsPowerMgmtPDUTableCurrentReset | read-write | current | Reset max, min and avg values of current. |
| 1.3.6.1.4.1.10418.26.2.5.3.1.44 | ColumnacsPowerMgmtPDUTableVoltageType | read-only | current | Type of voltage values. |
| 1.3.6.1.4.1.10418.26.2.5.3.1.45 | ColumnacsPowerMgmtPDUTableVoltageValue | read-only | current | Actual value of voltage sensor in this PDU unit.( V ) |
| 1.3.6.1.4.1.10418.26.2.5.3.1.46 | ColumnacsPowerMgmtPDUTableVoltageMax | read-only | current | Max detected value of voltage sensor in this PDU unit.( V ) |
| 1.3.6.1.4.1.10418.26.2.5.3.1.47 | ColumnacsPowerMgmtPDUTableVoltageMin | read-only | current | Min detected value of voltage sensor in this PDU unit.( V ) |
| 1.3.6.1.4.1.10418.26.2.5.3.1.48 | ColumnacsPowerMgmtPDUTableVoltageAvg | read-only | current | Average value for voltage sensor in this PDU unit.( V ) |
| 1.3.6.1.4.1.10418.26.2.5.3.1.49 | ColumnacsPowerMgmtPDUTableVoltageReset | read-write | current | Reset max, min and avg values of voltage. |
| 1.3.6.1.4.1.10418.26.2.5.3.1.50 | ColumnacsPowerMgmtPDUTablePowerType | read-only | current | Type of power consumption values.( W x 10 ) |
| 1.3.6.1.4.1.10418.26.2.5.3.1.51 | ColumnacsPowerMgmtPDUTablePowerValue | read-only | current | Actual value of power consumption in this PDU unit.( W x 10 ) |
| 1.3.6.1.4.1.10418.26.2.5.3.1.52 | ColumnacsPowerMgmtPDUTablePowerMax | read-only | current | Max detected value of power consumption in this PDU unit.( W x 10 ) |
| 1.3.6.1.4.1.10418.26.2.5.3.1.53 | ColumnacsPowerMgmtPDUTablePowerMin | read-only | current | Min detected value of power consumption in this PDU unit.( W x 10 ) |
| 1.3.6.1.4.1.10418.26.2.5.3.1.54 | ColumnacsPowerMgmtPDUTablePowerAvg | read-only | current | Average value for power consumption in this PDU unit.( W x 10 ) |
| 1.3.6.1.4.1.10418.26.2.5.3.1.55 | ColumnacsPowerMgmtPDUTablePowerReset | read-write | current | Reset max, min and avg values of power consumption. |
| 1.3.6.1.4.1.10418.26.2.5.3.1.56 | ColumnacsPowerMgmtPDUTablePowerFactorType | read-only | current | Type of power factor values. |
| 1.3.6.1.4.1.10418.26.2.5.3.1.57 | ColumnacsPowerMgmtPDUTablePowerFactorValue | read-only | current | Actual value of power factor in this PDU unit.( PF x 100 ) |
| 1.3.6.1.4.1.10418.26.2.5.3.1.58 | ColumnacsPowerMgmtPDUTablePowerFactorMax | read-only | current | Max detected value of power factor in this PDU unit.( PF x 100 ) |
| 1.3.6.1.4.1.10418.26.2.5.3.1.59 | ColumnacsPowerMgmtPDUTablePowerFactorMin | read-only | current | Min detected value of power factor in this PDU unit.( PF x 100 ) |
| 1.3.6.1.4.1.10418.26.2.5.3.1.60 | ColumnacsPowerMgmtPDUTablePowerFactorAvg | read-only | current | Average value for power factor in this PDU unit.( PF x 100 ) |
| 1.3.6.1.4.1.10418.26.2.5.3.1.61 | ColumnacsPowerMgmtPDUTablePowerFactorReset | read-write | current | Reset max, min and avg values of power factor. |
| 1.3.6.1.4.1.10418.26.2.5.3.1.62 | ColumnacsPowerMgmtPDUTableAlarm | read-only | current | Show the PDU alarm status. |
| 1.3.6.1.4.1.10418.26.2.5.3.1.63 | ColumnacsPowerMgmtPDUTableEnvSensors | read-only | current | Number of environmental sensor in this PDU. |
| 1.3.6.1.4.1.10418.26.2.5.3.1.64 | ColumnacsPowerMgmtPDUTableAgentSerialNumber | read-only | current | Serial number of the agent. |
| 1.3.6.1.4.1.10418.26.2.5.3.1.65 | ColumnacsPowerMgmtPDUTablePduModelNumber | read-only | current | Model number of the PDU. |
| 1.3.6.1.4.1.10418.26.2.5.3.1.66 | ColumnacsPowerMgmtPDUTablePduSerialNumber | read-only | current | Serial number of the PDU. |
| 1.3.6.1.4.1.10418.26.2.5.3.1.67 | ColumnacsPowerMgmtPDUTablePduPartNumber | read-only | current | Part number of the PDU. |
| 1.3.6.1.4.1.10418.26.2.5.4 | ScalaracsPowerMgmtTotalNumberOfOutlets | read-only | current | Number of outlets managed by the appliance. |
| 1.3.6.1.4.1.10418.26.2.5.5 | TableacsPowerMgmtOutletsTable | not-accessible | current | This table contains the information about outlets. |
| 1.3.6.1.4.1.10418.26.2.5.5.1 | RowacsPowerMgmtOutletsTableEntry | not-accessible | current | each entry has the information about the outlet. |
| 1.3.6.1.4.1.10418.26.2.5.5.1.1 | ColumnacsPowerMgmtOutletsTablePortNumber | read-only | current | Serial Port number. |
| 1.3.6.1.4.1.10418.26.2.5.5.1.2 | ColumnacsPowerMgmtOutletsTablePduNumber | read-only | current | Index. |
| 1.3.6.1.4.1.10418.26.2.5.5.1.3 | ColumnacsPowerMgmtOutletsTableNumber | read-only | current | Number of the outlet in the PDU. |
| 1.3.6.1.4.1.10418.26.2.5.5.1.4 | ColumnacsPowerMgmtOutletsTableName | read-only | current | Name of the outlet. |
| 1.3.6.1.4.1.10418.26.2.5.5.1.5 | ColumnacsPowerMgmtOutletsTableStatus | read-only | current | Status of the outlet. |
| 1.3.6.1.4.1.10418.26.2.5.5.1.6 | ColumnacsPowerMgmtOutletsTablePowerControl | read-write | current | A set value of power*(2-6) will send command to PDU. noAction(1) = always returned in a GET. Does nothing if SET. powerOn(2) = when SET the power On command is… |
| 1.3.6.1.4.1.10418.26.2.5.5.1.7 | ColumnacsPowerMgmtOutletsTablePortName | read-only | current | Serial Port Name where the PDU is connected. |
| 1.3.6.1.4.1.10418.26.2.5.5.1.8 | ColumnacsPowerMgmtOutletsTablePduId | read-only | current | PDU identification. |
| 1.3.6.1.4.1.10418.26.2.5.6 | ScalaracsPowerMgmtNumberOfOutletGroup | read-only | current | Number of configured group of outlets. |
| 1.3.6.1.4.1.10418.26.2.5.7 | TableacsPowerMgmtGroupTable | not-accessible | current | This table contains the information about group of outlets. |
| 1.3.6.1.4.1.10418.26.2.5.7.1 | RowacsPowerMgmtGroupTableEntry | not-accessible | current | each entry has the information about group of outlets. |
| 1.3.6.1.4.1.10418.26.2.5.7.1.1 | ColumnacsPowerMgmtGroupTableIndex | read-only | current | Index of the group. |
| 1.3.6.1.4.1.10418.26.2.5.7.1.2 | ColumnacsPowerMgmtGroupTableName | read-only | current | Name of the group of outlets. |
| 1.3.6.1.4.1.10418.26.2.5.7.1.3 | ColumnacsPowerMgmtGroupTableStatus | read-only | current | Status of the group of outlet. |
| 1.3.6.1.4.1.10418.26.2.5.7.1.4 | ColumnacsPowerMgmtGroupTablePowerControl | read-write | current | A set value of power*(2-6) will send command to PDU. noAction(1) = always returned in a GET. Does nothing if SET. powerOn(2) = when SET the power On command is… |
| 1.3.6.1.4.1.10418.26.2.5.8 | TableacsPowerMgmtPhasesTable | not-accessible | current | This table contains data monitoring of each detected phase. |
| 1.3.6.1.4.1.10418.26.2.5.8.1 | RowacsPowerMgmtPhasesTableEntry | not-accessible | current | each entry has the data monitoring about phases. |
| 1.3.6.1.4.1.10418.26.2.5.8.1.1 | ColumnacsPowerMgmtPhasesTablePortNumber | read-only | current | Number of serial port when the PDU is connected. |
| 1.3.6.1.4.1.10418.26.2.5.8.1.2 | ColumnacsPowerMgmtPhasesTablePduIndex | read-only | current | A PDU position in the chain. |
| 1.3.6.1.4.1.10418.26.2.5.8.1.3 | ColumnacsPowerMgmtPhasesTablePhaseIndex | read-only | current | phase index in the PDU. |
| 1.3.6.1.4.1.10418.26.2.5.8.1.4 | ColumnacsPowerMgmtPhasesTablePhaseName | read-only | current | phase name in the PDU. |
| 1.3.6.1.4.1.10418.26.2.5.8.1.5 | ColumnacsPowerMgmtPhasesTablePduId | read-only | current | PDU identification. |
| 1.3.6.1.4.1.10418.26.2.5.8.1.6 | ColumnacsPowerMgmtPhasesTablePortName | read-only | current | Name of serial port when the PDU is connected. |
| 1.3.6.1.4.1.10418.26.2.5.8.1.7 | ColumnacsPowerMgmtPhasesTableCurrentValue | read-only | current | Actual value of current sensor in this phase.( A x 10 ) |
| 1.3.6.1.4.1.10418.26.2.5.8.1.8 | ColumnacsPowerMgmtPhasesTableCurrentMax | read-only | current | Max detected value of current sensor in this phase.( A x 10 ) |
| 1.3.6.1.4.1.10418.26.2.5.8.1.9 | ColumnacsPowerMgmtPhasesTableCurrentMin | read-only | current | Min detected value of current sensor in this phase.( A x 10 ) |
| 1.3.6.1.4.1.10418.26.2.5.8.1.10 | ColumnacsPowerMgmtPhasesTableCurrentAvg | read-only | current | Average value for current sensor in this phase.( A x 10 ) |
| 1.3.6.1.4.1.10418.26.2.5.8.1.11 | ColumnacsPowerMgmtPhasesTableCurrentReset | read-write | current | Reset max, min and avg values of current. |
| 1.3.6.1.4.1.10418.26.2.5.8.1.12 | ColumnacsPowerMgmtPhasesTableVoltageType | read-only | current | Type of voltage values. |
| 1.3.6.1.4.1.10418.26.2.5.8.1.13 | ColumnacsPowerMgmtPhasesTableVoltageValue | read-only | current | Actual value of voltage sensor in this phase.( V ) |
| 1.3.6.1.4.1.10418.26.2.5.8.1.14 | ColumnacsPowerMgmtPhasesTableVoltageMax | read-only | current | Max detected value of voltage sensor in this phase.( V ) |
| 1.3.6.1.4.1.10418.26.2.5.8.1.15 | ColumnacsPowerMgmtPhasesTableVoltageMin | read-only | current | Min detected value of voltage sensor in this phase.( V ) |
| 1.3.6.1.4.1.10418.26.2.5.8.1.16 | ColumnacsPowerMgmtPhasesTableVoltageAvg | read-only | current | Average value for voltage sensor in this phase.( V ) |
| 1.3.6.1.4.1.10418.26.2.5.8.1.17 | ColumnacsPowerMgmtPhasesTableVoltageReset | read-write | current | Reset max, min and avg values of voltage. |
| 1.3.6.1.4.1.10418.26.2.5.8.1.18 | ColumnacsPowerMgmtPhasesTablePowerType | read-only | current | Type of power consumption values. |
| 1.3.6.1.4.1.10418.26.2.5.8.1.19 | ColumnacsPowerMgmtPhasesTablePowerValue | read-only | current | Actual value of power consumption in this phase.( W x 10 ) |
| 1.3.6.1.4.1.10418.26.2.5.8.1.20 | ColumnacsPowerMgmtPhasesTablePowerMax | read-only | current | Max detected value of power consumption in this phase.( W x 10 ) |
| 1.3.6.1.4.1.10418.26.2.5.8.1.21 | ColumnacsPowerMgmtPhasesTablePowerMin | read-only | current | Min detected value of power consumption in this phase.( W x 10 ) |
| 1.3.6.1.4.1.10418.26.2.5.8.1.22 | ColumnacsPowerMgmtPhasesTablePowerAvg | read-only | current | Average value for power consumption in this phase.( W x 10 ) |
| 1.3.6.1.4.1.10418.26.2.5.8.1.23 | ColumnacsPowerMgmtPhasesTablePowerReset | read-write | current | Reset max, min and avg values of power consumption. |
| 1.3.6.1.4.1.10418.26.2.5.8.1.24 | ColumnacsPowerMgmtPhasesTablePowerFactorType | read-only | current | Type of power factor values. |
| 1.3.6.1.4.1.10418.26.2.5.8.1.25 | ColumnacsPowerMgmtPhasesTablePowerFactorValue | read-only | current | Actual value of power factor in this phase.( PF x 100 ) |
| 1.3.6.1.4.1.10418.26.2.5.8.1.26 | ColumnacsPowerMgmtPhasesTablePowerFactorMax | read-only | current | Max detected value of power factor in this phase.( PF x 100 ) |
| 1.3.6.1.4.1.10418.26.2.5.8.1.27 | ColumnacsPowerMgmtPhasesTablePowerFactorMin | read-only | current | Min detected value of power factor in this phase.( PF x 100 ) |
| 1.3.6.1.4.1.10418.26.2.5.8.1.28 | ColumnacsPowerMgmtPhasesTablePowerFactorAvg | read-only | current | Average value for power factor in this phase.( PF x 100 ) |
| 1.3.6.1.4.1.10418.26.2.5.8.1.29 | ColumnacsPowerMgmtPhasesTablePowerFactorReset | read-write | current | Reset max, min and avg values of power factor. |
| 1.3.6.1.4.1.10418.26.2.5.8.1.30 | ColumnacsPowerMgmtPhasesTableAlarm | read-only | current | Show the phase alarm status. |
| 1.3.6.1.4.1.10418.26.2.5.9 | TableacsPowerMgmtBanksTable | not-accessible | current | This table contains data monitoring of each detected bank. |
| 1.3.6.1.4.1.10418.26.2.5.9.1 | RowacsPowerMgmtBanksTableEntry | not-accessible | current | each entry has the data monitoring about bank. |
| 1.3.6.1.4.1.10418.26.2.5.9.1.1 | ColumnacsPowerMgmtBanksTablePortNumber | read-only | current | Number of serial port when the PDU is connected. |
| 1.3.6.1.4.1.10418.26.2.5.9.1.2 | ColumnacsPowerMgmtBanksTablePduIndex | read-only | current | A PDU position in the chain. |
| 1.3.6.1.4.1.10418.26.2.5.9.1.3 | ColumnacsPowerMgmtBanksTableBankIndex | read-only | current | Bank index in the PDU. |
| 1.3.6.1.4.1.10418.26.2.5.9.1.4 | ColumnacsPowerMgmtBanksTableBankName | read-only | current | Bank name in the PDU. |
| 1.3.6.1.4.1.10418.26.2.5.9.1.5 | ColumnacsPowerMgmtBanksTablePduId | read-only | current | PDU identification. |
| 1.3.6.1.4.1.10418.26.2.5.9.1.6 | ColumnacsPowerMgmtBanksTablePortName | read-only | current | Name of serial port when the PDU is connected. |
| 1.3.6.1.4.1.10418.26.2.5.9.1.7 | ColumnacsPowerMgmtBanksTableCurrentValue | read-only | current | Actual value of current sensor in this bank.( A x 10 ) |
| 1.3.6.1.4.1.10418.26.2.5.9.1.8 | ColumnacsPowerMgmtBanksTableCurrentMax | read-only | current | Max detected value of current sensor in this bank.( A x 10 ) |
| 1.3.6.1.4.1.10418.26.2.5.9.1.9 | ColumnacsPowerMgmtBanksTableCurrentMin | read-only | current | Min detected value of current sensor in this bank.( A x 10 ) |
| 1.3.6.1.4.1.10418.26.2.5.9.1.10 | ColumnacsPowerMgmtBanksTableCurrentAvg | read-only | current | Average value for current sensor in this bank.( A x 10 ) |
| 1.3.6.1.4.1.10418.26.2.5.9.1.11 | ColumnacsPowerMgmtBanksTableCurrentReset | read-write | current | Reset max, min and avg values of current. |
| 1.3.6.1.4.1.10418.26.2.5.9.1.12 | ColumnacsPowerMgmtBanksTableVoltageType | read-only | current | Type of voltage values. |
| 1.3.6.1.4.1.10418.26.2.5.9.1.13 | ColumnacsPowerMgmtBanksTableVoltageValue | read-only | current | Actual value of voltage sensor in this bank.( V ) |
| 1.3.6.1.4.1.10418.26.2.5.9.1.14 | ColumnacsPowerMgmtBanksTableVoltageMax | read-only | current | Max detected value of voltage sensor in this bank.( V ) |
| 1.3.6.1.4.1.10418.26.2.5.9.1.15 | ColumnacsPowerMgmtBanksTableVoltageMin | read-only | current | Min detected value of voltage sensor in this bank.( V ) |
| 1.3.6.1.4.1.10418.26.2.5.9.1.16 | ColumnacsPowerMgmtBanksTableVoltageAvg | read-only | current | Average value for voltage sensor in this bank.( V ) |
| 1.3.6.1.4.1.10418.26.2.5.9.1.17 | ColumnacsPowerMgmtBanksTableVoltageReset | read-write | current | Reset max, min and avg values of voltage. |
| 1.3.6.1.4.1.10418.26.2.5.9.1.18 | ColumnacsPowerMgmtBanksTablePowerType | read-only | current | Type of power consumption values. |
| 1.3.6.1.4.1.10418.26.2.5.9.1.19 | ColumnacsPowerMgmtBanksTablePowerValue | read-only | current | Actual value of power consumption in this bank.( W x 10 ) |
| 1.3.6.1.4.1.10418.26.2.5.9.1.20 | ColumnacsPowerMgmtBanksTablePowerMax | read-only | current | Max detected value of power consumption in this bank.( W x 10 ) |
| 1.3.6.1.4.1.10418.26.2.5.9.1.21 | ColumnacsPowerMgmtBanksTablePowerMin | read-only | current | Min detected value of power consumption in this bank.( W x 10 ) |
| 1.3.6.1.4.1.10418.26.2.5.9.1.22 | ColumnacsPowerMgmtBanksTablePowerAvg | read-only | current | Average value for power consumption in this bank.( W x 10 ) |
| 1.3.6.1.4.1.10418.26.2.5.9.1.23 | ColumnacsPowerMgmtBanksTablePowerReset | read-write | current | Reset max, min and avg values of power consumption. |
| 1.3.6.1.4.1.10418.26.2.5.9.1.24 | ColumnacsPowerMgmtBanksTablePowerFactorType | read-only | current | Type of power factor values. |
| 1.3.6.1.4.1.10418.26.2.5.9.1.25 | ColumnacsPowerMgmtBanksTablePowerFactorValue | read-only | current | Actual value of power factor in this bank.( PF x 100 ) |
| 1.3.6.1.4.1.10418.26.2.5.9.1.26 | ColumnacsPowerMgmtBanksTablePowerFactorMax | read-only | current | Max detected value of power factor in this bank.( PF x 100 ) |
| 1.3.6.1.4.1.10418.26.2.5.9.1.27 | ColumnacsPowerMgmtBanksTablePowerFactorMin | read-only | current | Min detected value of power factor in this bank.( PF x 100 ) |
| 1.3.6.1.4.1.10418.26.2.5.9.1.28 | ColumnacsPowerMgmtBanksTablePowerFactorAvg | read-only | current | Average value for power factor in this bank.( PF x 100 ) |
| 1.3.6.1.4.1.10418.26.2.5.9.1.29 | ColumnacsPowerMgmtBanksTablePowerFactorReset | read-write | current | Reset max, min and avg values of power factor. |
| 1.3.6.1.4.1.10418.26.2.5.9.1.30 | ColumnacsPowerMgmtBanksTableAlarm | read-only | current | Show the bank alarm status. |
| 1.3.6.1.4.1.10418.26.2.5.10 | TableacsPowerMgmtEnvMonTable | not-accessible | current | This table contains data monitoring of each detected environmental sensor. |
| 1.3.6.1.4.1.10418.26.2.5.10.1 | RowacsPowerMgmtEnvMonTableEntry | not-accessible | current | each entry has the data monitoring about environmental sensors. |
| 1.3.6.1.4.1.10418.26.2.5.10.1.1 | ColumnacsPowerMgmtEnvMonTablePortNumber | read-only | current | Number of serial port when the PDU is connected. |
| 1.3.6.1.4.1.10418.26.2.5.10.1.2 | ColumnacsPowerMgmtEnvMonTablePduIndex | read-only | current | A PDU position in the chain. |
| 1.3.6.1.4.1.10418.26.2.5.10.1.3 | ColumnacsPowerMgmtEnvMonTableIndex | read-only | current | envmon sensor index. |
| 1.3.6.1.4.1.10418.26.2.5.10.1.4 | ColumnacsPowerMgmtEnvMonTableName | read-only | current | envmon sensor name. |
| 1.3.6.1.4.1.10418.26.2.5.10.1.5 | ColumnacsPowerMgmtEnvMonTablePduId | read-only | current | PDU identification. |
| 1.3.6.1.4.1.10418.26.2.5.10.1.6 | ColumnacsPowerMgmtEnvMonTablePortName | read-only | current | Name of serial port when the PDU is connected. |
| 1.3.6.1.4.1.10418.26.2.5.10.1.7 | ColumnacsPowerMgmtEnvMonTableType | read-only | current | The type of environmental monitor. |
| 1.3.6.1.4.1.10418.26.2.5.10.1.8 | ColumnacsPowerMgmtEnvMonTableStatus | read-only | current | Status of digital sensors: Dry-Contact, Water level, Smoke sensor, Motion sensor, Door-Contact, Leak, A2D. For Door-Contact, normal(1) = closed, triggered(2) =… |
| 1.3.6.1.4.1.10418.26.2.5.10.1.9 | ColumnacsPowerMgmtEnvMonTableValue | read-only | current | Detected value for envmon sensors. Temperature: C x 10. Humidity: %. Air flow: afu. |
| 1.3.6.1.4.1.10418.26.2.5.10.1.10 | ColumnacsPowerMgmtEnvMonTableMaxValue | read-only | current | Max detected value for envmon sensors. Temperature: C x 10. Humidity: %. Air flow: afu. Voltage VDC x 100. Current x 100. |
| 1.3.6.1.4.1.10418.26.2.5.11 | TableacsPowerMgmtOutElecMonTable | not-accessible | current | This table contains the information about data monitoring of outlets. |
| 1.3.6.1.4.1.10418.26.2.5.11.1 | RowacsPowerMgmtOutElecMonTableEntry | not-accessible | current | each entry has the information about the outlet. |
| 1.3.6.1.4.1.10418.26.2.5.11.1.1 | ColumnacsPowerMgmtOutElecMonTablePortNumber | read-only | current | Serial Port number. |
| 1.3.6.1.4.1.10418.26.2.5.11.1.2 | ColumnacsPowerMgmtOutElecMonTablePduNumber | read-only | current | Index. |
| 1.3.6.1.4.1.10418.26.2.5.11.1.3 | ColumnacsPowerMgmtOutElecMonTableNumber | read-only | current | Number of the outlet in the PDU. |
| 1.3.6.1.4.1.10418.26.2.5.11.1.4 | ColumnacsPowerMgmtOutElecMonTableCurrentValue | read-only | current | Actual value of outlet current sensor.( A x 10 ) |
| 1.3.6.1.4.1.10418.26.2.5.11.1.5 | ColumnacsPowerMgmtOutElecMonTableCurrentMax | read-only | current | Max detected value of outlet current sensor.( A x 10 ) |
| 1.3.6.1.4.1.10418.26.2.5.11.1.6 | ColumnacsPowerMgmtOutElecMonTableCurrentMin | read-only | current | Min detected value of outlet current sensor.( A x 10 ) |
| 1.3.6.1.4.1.10418.26.2.5.11.1.7 | ColumnacsPowerMgmtOutElecMonTableCurrentAvg | read-only | current | Average value for outlet current sensor.( A x 10 ) |
| 1.3.6.1.4.1.10418.26.2.5.11.1.8 | ColumnacsPowerMgmtOutElecMonTableCurrentReset | read-write | current | Reset max, min and avertage values of outlet current. |
| 1.3.6.1.4.1.10418.26.2.5.11.1.9 | ColumnacsPowerMgmtOutElecMonTablePowerValue | read-only | current | Actual value of outlet power comsumption sensor.( W x 10 ) |
| 1.3.6.1.4.1.10418.26.2.5.11.1.10 | ColumnacsPowerMgmtOutElecMonTablePowerMax | read-only | current | Max detected value of outlet power comsumption sensor.( W x 10 ) |
| 1.3.6.1.4.1.10418.26.2.5.11.1.11 | ColumnacsPowerMgmtOutElecMonTablePowerMin | read-only | current | Min detected value of outlet power comsumption sensor.( W x 10 ) |
| 1.3.6.1.4.1.10418.26.2.5.11.1.12 | ColumnacsPowerMgmtOutElecMonTablePowerAvg | read-only | current | Average value for outlet power comsumption sensor.( W x 10 ) |
| 1.3.6.1.4.1.10418.26.2.5.11.1.13 | ColumnacsPowerMgmtOutElecMonTablePowerReset | read-write | current | Reset max, min and avertage values of outlet power comsumption. |
| 1.3.6.1.4.1.10418.26.2.5.11.1.14 | ColumnacsPowerMgmtOutElecMonTableVoltageValue | read-only | current | Actual value of outlet voltage sensor.( V ) |
| 1.3.6.1.4.1.10418.26.2.5.11.1.15 | ColumnacsPowerMgmtOutElecMonTableVoltageMax | read-only | current | Max detected value of outlet voltage sensor.( V ) |
| 1.3.6.1.4.1.10418.26.2.5.11.1.16 | ColumnacsPowerMgmtOutElecMonTableVoltageMin | read-only | current | Min detected value of outlet voltage sensor.( V ) |
| 1.3.6.1.4.1.10418.26.2.5.11.1.17 | ColumnacsPowerMgmtOutElecMonTableVoltageAvg | read-only | current | Average value for outlet voltage sensor.( V ) |
| 1.3.6.1.4.1.10418.26.2.5.11.1.18 | ColumnacsPowerMgmtOutElecMonTableVoltageReset | read-write | current | Reset max, min and avertage values of outlet voltage. |
| 1.3.6.1.4.1.10418.26.2.5.11.1.19 | ColumnacsPowerMgmtOutElecMonTablePowerFactorValue | read-only | current | Actual value of outlet power-factor sensor.( PF x 100 ) |
| 1.3.6.1.4.1.10418.26.2.5.11.1.20 | ColumnacsPowerMgmtOutElecMonTablePowerFactorMax | read-only | current | Max detected value of outlet power-factor sensor.( PF x 100 ) |
| 1.3.6.1.4.1.10418.26.2.5.11.1.21 | ColumnacsPowerMgmtOutElecMonTablePowerFactorMin | read-only | current | Min detected value of outlet power-factor sensor.( PF x 100 ) |
| 1.3.6.1.4.1.10418.26.2.5.11.1.22 | ColumnacsPowerMgmtOutElecMonTablePowerFactorAvg | read-only | current | Average value for outlet power-factor sensor.( PF x 100 ) |
| 1.3.6.1.4.1.10418.26.2.5.11.1.23 | ColumnacsPowerMgmtOutElecMonTablePowerFactorReset | read-write | current | Reset max, min and avertage values of outlet power-factor. |
| 1.3.6.1.4.1.10418.26.2.5.11.1.24 | ColumnacsPowerMgmtOutElecMonTableAlarm | read-only | current | Show the outlet alarm status. |
| 1.3.6.1.4.1.10418.26.2.5.12 | TableacsPowerMgmtUPSTable | not-accessible | current | This table contains the list of detected UPSs. |
| 1.3.6.1.4.1.10418.26.2.5.12.1 | RowacsPowerMgmtUPSTableEntry | not-accessible | current | Each entry has the information about the UPS. |
| 1.3.6.1.4.1.10418.26.2.5.12.1.1 | ColumnacsPowerMgmtUPSTablePortNumber | read-only | current | Number of serial port when the UPS is connected. |
| 1.3.6.1.4.1.10418.26.2.5.12.1.2 | ColumnacsPowerMgmtUPSTableUpsIndex | read-only | current | A UPS position in the chain. |
| 1.3.6.1.4.1.10418.26.2.5.12.1.3 | ColumnacsPowerMgmtUPSTableUpsId | read-only | current | UPS identification. |
| 1.3.6.1.4.1.10418.26.2.5.12.1.4 | ColumnacsPowerMgmtUPSTablePortName | read-only | current | Name of serial port or IP address if network device |
| 1.3.6.1.4.1.10418.26.2.5.12.1.5 | ColumnacsPowerMgmtUPSTableModel | read-only | current | Model of the UPS. |
| 1.3.6.1.4.1.10418.26.2.5.12.1.6 | ColumnacsPowerMgmtUPSTableVendor | read-only | current | Vendor of the UPS. |
| 1.3.6.1.4.1.10418.26.2.5.12.1.7 | ColumnacsPowerMgmtUPSTableFirmwareVersion | read-only | current | Version of the UPS firmware. |
| 1.3.6.1.4.1.10418.26.2.5.12.1.8 | ColumnacsPowerMgmtUPSTableAgentFirmwareVersion | read-only | current | Firmware version of the agent card. |
| 1.3.6.1.4.1.10418.26.2.5.12.1.9 | ColumnacsPowerMgmtUPSTableSystemStatus | read-only | current | System Status of the UPS. |
| 1.3.6.1.4.1.10418.26.2.5.12.1.10 | ColumnacsPowerMgmtUPSTableInputBlackOutCount | read-only | current | The number of occurrences, since the last reset, where the input was not qualified to provide power to the system. |
| 1.3.6.1.4.1.10418.26.2.5.12.1.11 | ColumnacsPowerMgmtUPSTableInputBrownOutCount | read-only | current | The number of occurrences, since the last reset, where the system input voltage has fallen below a pre-determined threshold for a specified amount of time. |
| 1.3.6.1.4.1.10418.26.2.5.12.1.12 | ColumnacsPowerMgmtUPSTableInletAirTemperature | read-only | current | Temperature of the inlet air. |
| 1.3.6.1.4.1.10418.26.2.5.12.1.13 | ColumnacsPowerMgmtUPSTableNumberOutletGroups | read-only | current | The number of Outlet Groups on this UPS |
| 1.3.6.1.4.1.10418.26.2.5.12.1.14 | ColumnacsPowerMgmtUPSTableUPSSerialNumber | read-only | current | System serial number. |
| 1.3.6.1.4.1.10418.26.2.5.12.1.15 | ColumnacsPowerMgmtUPSTableUPSManufactureDate | read-only | current | Manufacturing date of the system. |
| 1.3.6.1.4.1.10418.26.2.5.12.1.16 | ColumnacsPowerMgmtUPSTableAutoRestartDelay | read-write | current | If power is lost, the control will delay this amount of time after power is restored before restarting the unit. |
| 1.3.6.1.4.1.10418.26.2.5.12.1.17 | ColumnacsPowerMgmtUPSTableAutoRestartControl | read-write | current | When set to enabled, the UPS will automatically restart the load when utility power is restored after a battery discharge. |
| 1.3.6.1.4.1.10418.26.2.5.12.1.18 | ColumnacsPowerMgmtUPSTableAudibleAlarmControl | read-write | current | Audible alarm control. |
| 1.3.6.1.4.1.10418.26.2.5.12.1.19 | ColumnacsPowerMgmtUPSTableSilenceAlarm | read-write | current | Silence audible alarm. |
| 1.3.6.1.4.1.10418.26.2.5.12.1.20 | ColumnacsPowerMgmtUPSTableInverterState | read-only | current | Inverter on/off state. |
| 1.3.6.1.4.1.10418.26.2.5.12.1.21 | ColumnacsPowerMgmtUPSTableDCConverterStatus | read-only | current | The operating state of the dc converter. |
| 1.3.6.1.4.1.10418.26.2.5.12.1.22 | ColumnacsPowerMgmtUPSTableShutdownReason | read-only | current | The reason for the most recent shutdown. |
| 1.3.6.1.4.1.10418.26.2.5.12.1.23 | ColumnacsPowerMgmtUPSTableUPSTopology | read-only | current | UPS Topology. |
| 1.3.6.1.4.1.10418.26.2.5.12.1.24 | ColumnacsPowerMgmtUPSTableBypassInverterInputConfig | read-only | current | Input source configuration for the bypass and inverter. |
| 1.3.6.1.4.1.10418.26.2.5.13 | TableacsPowerMgmtUPSInputTable | not-accessible | current | This table contains the information about UPS inputs. |
| 1.3.6.1.4.1.10418.26.2.5.13.1 | RowacsPowerMgmtUPSInputTableEntry | not-accessible | current | each entry has the information about the UPS inputs. |
| 1.3.6.1.4.1.10418.26.2.5.13.1.1 | ColumnacsPowerMgmtUPSInputTablePortNumber | read-only | current | Serial Port number. |
| 1.3.6.1.4.1.10418.26.2.5.13.1.2 | ColumnacsPowerMgmtUPSInputTableUpsIndex | read-only | current | Index. |
| 1.3.6.1.4.1.10418.26.2.5.13.1.3 | ColumnacsPowerMgmtUPSInputTableFrequency | read-only | current | Input Frequency. |
| 1.3.6.1.4.1.10418.26.2.5.13.1.4 | ColumnacsPowerMgmtUPSInputTableRMSVoltageL1N | read-only | current | RMS Voltage L1-N. |
| 1.3.6.1.4.1.10418.26.2.5.13.1.5 | ColumnacsPowerMgmtUPSInputTableRMSVoltageL1L2 | read-only | current | RMS Voltage L1L2. |
| 1.3.6.1.4.1.10418.26.2.5.13.1.6 | ColumnacsPowerMgmtUPSInputTableRMSVoltageL2N | read-only | current | RMS Voltage L2N. |
| 1.3.6.1.4.1.10418.26.2.5.13.1.7 | ColumnacsPowerMgmtUPSInputTableRMSCurrentL1 | read-only | current | RMS Current for L1. |
| 1.3.6.1.4.1.10418.26.2.5.13.1.8 | ColumnacsPowerMgmtUPSInputTableRMSCurrentL2 | read-only | current | RMS Current for L2. |
| 1.3.6.1.4.1.10418.26.2.5.13.1.9 | ColumnacsPowerMgmtUPSInputTableMaxVoltageL1N | read-only | current | Input Max Voltage measurement for Line L1-N since the last reset. |
| 1.3.6.1.4.1.10418.26.2.5.13.1.10 | ColumnacsPowerMgmtUPSInputTableMinVoltageL1N | read-only | current | Input Min Voltage measurement for Line L1-N since the last reset. |
| 1.3.6.1.4.1.10418.26.2.5.13.1.11 | ColumnacsPowerMgmtUPSInputTableMaxVoltageL2N | read-only | current | Input Max Voltage measurement for Line L2-N since the last reset. |
| 1.3.6.1.4.1.10418.26.2.5.13.1.12 | ColumnacsPowerMgmtUPSInputTableMinVoltageL2N | read-only | current | Input Min Voltage measurement for Line L1-N since the last reset. |
| 1.3.6.1.4.1.10418.26.2.5.13.1.13 | ColumnacsPowerMgmtUPSInputTableNominalVoltage | read-only | current | Input nominal voltage. |
| 1.3.6.1.4.1.10418.26.2.5.13.1.14 | ColumnacsPowerMgmtUPSInputTableNominalFrequency | read-only | current | Input nominal frequency. |
| 1.3.6.1.4.1.10418.26.2.5.13.1.15 | ColumnacsPowerMgmtUPSInputTableNominalCurrent | read-only | current | Input nominal current. |
| 1.3.6.1.4.1.10418.26.2.5.13.1.16 | ColumnacsPowerMgmtUPSInputTableEnergy | read-only | current | Input Energy. |
| 1.3.6.1.4.1.10418.26.2.5.13.1.17 | ColumnacsPowerMgmtUPSInputTablePowerFactorL1N | read-only | current | Input Power Factor for Line 1. |
| 1.3.6.1.4.1.10418.26.2.5.13.1.18 | ColumnacsPowerMgmtUPSInputTablePowerFactorL2N | read-only | current | Input Power Factor for Line 2. |
| 1.3.6.1.4.1.10418.26.2.5.14 | TableacsPowerMgmtUPSBypassTable | not-accessible | current | This table contains the information about UPS bypass. |
| 1.3.6.1.4.1.10418.26.2.5.14.1 | RowacsPowerMgmtUPSBypassTableEntry | not-accessible | current | each entry has the information about the UPS bypass. |
| 1.3.6.1.4.1.10418.26.2.5.14.1.1 | ColumnacsPowerMgmtUPSBypassTablePortNumber | read-only | current | Serial Port number. |
| 1.3.6.1.4.1.10418.26.2.5.14.1.2 | ColumnacsPowerMgmtUPSBypassTableUpsIndex | read-only | current | Index. |
| 1.3.6.1.4.1.10418.26.2.5.14.1.3 | ColumnacsPowerMgmtUPSBypassTableRMSVoltageL1N | read-only | current | RMS Voltage L1N. |
| 1.3.6.1.4.1.10418.26.2.5.14.1.4 | ColumnacsPowerMgmtUPSBypassTableRMSVoltageL1L2 | read-only | current | RMS Voltage L1L2. |
| 1.3.6.1.4.1.10418.26.2.5.14.1.5 | ColumnacsPowerMgmtUPSBypassTableRMSVoltageL2N | read-only | current | RMS Voltage L2N. |
| 1.3.6.1.4.1.10418.26.2.5.14.1.6 | ColumnacsPowerMgmtUPSBypassTableRMSCurrent | read-only | current | RMS Current. |
| 1.3.6.1.4.1.10418.26.2.5.14.1.7 | ColumnacsPowerMgmtUPSBypassTableRMSCurrentL2 | read-only | current | RMS Current. |
| 1.3.6.1.4.1.10418.26.2.5.14.1.8 | ColumnacsPowerMgmtUPSBypassTableInputFrequency | read-only | current | Bypass Input Frequency. |
| 1.3.6.1.4.1.10418.26.2.5.14.1.9 | ColumnacsPowerMgmtUPSBypassTableNominalVoltage | read-only | current | Bypass Nominal Voltage. |
| 1.3.6.1.4.1.10418.26.2.5.15 | TableacsPowerMgmtUPSBatteryTable | not-accessible | current | This table contains the information about UPS battery. |
| 1.3.6.1.4.1.10418.26.2.5.15.1 | RowacsPowerMgmtUPSBatteryTableEntry | not-accessible | current | each entry has the information about the UPS bypass. |
| 1.3.6.1.4.1.10418.26.2.5.15.1.1 | ColumnacsPowerMgmtUPSBatteryTablePortNumber | read-only | current | Serial Port number. |
| 1.3.6.1.4.1.10418.26.2.5.15.1.2 | ColumnacsPowerMgmtUPSBatteryTableUpsIndex | read-only | current | Index. |
| 1.3.6.1.4.1.10418.26.2.5.15.1.3 | ColumnacsPowerMgmtUPSBatteryTableDCBusVoltage | read-only | current | DC Bus Voltage |
| 1.3.6.1.4.1.10418.26.2.5.15.1.4 | ColumnacsPowerMgmtUPSBatteryTableTimeRemaining | read-only | current | The calculated available time on battery. |
| 1.3.6.1.4.1.10418.26.2.5.15.1.5 | ColumnacsPowerMgmtUPSBatteryTablePercentageCharge | read-only | current | Battery Percentage Charge. |
| 1.3.6.1.4.1.10418.26.2.5.15.1.6 | ColumnacsPowerMgmtUPSBatteryTableChargeStatus | read-only | current | Battery Charge Status. |
| 1.3.6.1.4.1.10418.26.2.5.15.1.7 | ColumnacsPowerMgmtUPSBatteryTableLowBatteryWarningTime | read-write | current | When battery time remaining falls to, or below, this value (minutes) the low battery alarm is activated. |
| 1.3.6.1.4.1.10418.26.2.5.15.1.8 | ColumnacsPowerMgmtUPSBatteryTableTestResult | read-only | current | The outcome of the previous battery test. |
| 1.3.6.1.4.1.10418.26.2.5.15.1.9 | ColumnacsPowerMgmtUPSBatteryTableDCBusNominalVoltage | read-only | current | Battery DC Bus Nominal Voltage. |
| 1.3.6.1.4.1.10418.26.2.5.15.1.10 | ColumnacsPowerMgmtUPSBatteryTableNominalBatteryCapacity | read-only | current | Nominal Battery Capacity. |
| 1.3.6.1.4.1.10418.26.2.5.15.1.11 | ColumnacsPowerMgmtUPSBatteryTableBatteryFloatVoltage | read-only | current | Battery Float Voltage. |
| 1.3.6.1.4.1.10418.26.2.5.15.1.12 | ColumnacsPowerMgmtUPSBatteryTableBatteryCabinetType | read-only | current | Battery Cabinet Type. |
| 1.3.6.1.4.1.10418.26.2.5.15.1.13 | ColumnacsPowerMgmtUPSBatteryTableBatteryNumberOfEBC | read-only | current | Number of Extended Battery Cabinets installed. |
| 1.3.6.1.4.1.10418.26.2.5.15.1.14 | ColumnacsPowerMgmtUPSBatteryTableBatteryRating | read-only | current | Battery Rating. |
| 1.3.6.1.4.1.10418.26.2.5.15.1.15 | ColumnacsPowerMgmtUPSBatteryTableBatteryDischargeTime | read-only | current | Time on battery operation for this discharge |
| 1.3.6.1.4.1.10418.26.2.5.15.1.16 | ColumnacsPowerMgmtUPSBatteryTableBatteryChargeCompensating | read-only | current | Battery charge algorithm changed due to battery temperature. |
| 1.3.6.1.4.1.10418.26.2.5.15.1.17 | ColumnacsPowerMgmtUPSBatteryTableBatteryChargerState | read-only | current | Battery charger state. |
| 1.3.6.1.4.1.10418.26.2.5.15.1.18 | ColumnacsPowerMgmtUPSBatteryTableStartBatteryTest | read-write | current | Command to initate a manual battery test. |
| 1.3.6.1.4.1.10418.26.2.5.15.1.19 | ColumnacsPowerMgmtUPSBatteryTableBatteryStatus | read-only | current | Battery Status. |
| 1.3.6.1.4.1.10418.26.2.5.15.1.20 | ColumnacsPowerMgmtUPSBatteryTableBatteryTotalDischargeTime | read-only | current | Cumulative battery discharge time. |
| 1.3.6.1.4.1.10418.26.2.5.15.1.21 | ColumnacsPowerMgmtUPSBatteryTableBatteryDischargeCount | read-only | current | Total number of battery discharges. |
| 1.3.6.1.4.1.10418.26.2.5.15.1.22 | ColumnacsPowerMgmtUPSBatteryTableBatteryCurrent | read-only | current | Current at the battery input terminals. In charging mode, the current will be a positive value. In discharging mode, the current will be a negative value. |
| 1.3.6.1.4.1.10418.26.2.5.16 | TableacsPowerMgmtUPSOutputTable | not-accessible | current | This table contains the information about UPS output. |
| 1.3.6.1.4.1.10418.26.2.5.16.1 | RowacsPowerMgmtUPSOutputTableEntry | not-accessible | current | Each entry has the information about the UPS output. |
| 1.3.6.1.4.1.10418.26.2.5.16.1.1 | ColumnacsPowerMgmtUPSOutputTablePortNumber | read-only | current | Serial Port number. |
| 1.3.6.1.4.1.10418.26.2.5.16.1.2 | ColumnacsPowerMgmtUPSOutputTableUpsIndex | read-only | current | Index. |
| 1.3.6.1.4.1.10418.26.2.5.16.1.3 | ColumnacsPowerMgmtUPSOutputTableApparentPower | read-only | current | DC Bus Voltage |
| 1.3.6.1.4.1.10418.26.2.5.16.1.4 | ColumnacsPowerMgmtUPSOutputTableFrequency | read-only | current | Output frequency. |
| 1.3.6.1.4.1.10418.26.2.5.16.1.5 | ColumnacsPowerMgmtUPSOutputTablePercentPower | read-only | current | The system output power as a percentage of the rated capacity. |
| 1.3.6.1.4.1.10418.26.2.5.16.1.6 | ColumnacsPowerMgmtUPSOutputTablePercentPowerL1 | read-only | current | The system output power on line L1 as a percentage of the rated capacity. |
| 1.3.6.1.4.1.10418.26.2.5.16.1.7 | ColumnacsPowerMgmtUPSOutputTablePercentPowerL2 | read-only | current | The system output power on line L2 as a percentage of the rated capacity. |
| 1.3.6.1.4.1.10418.26.2.5.16.1.8 | ColumnacsPowerMgmtUPSOutputTablePower | read-only | current | The sum total power of all system output phases. |
| 1.3.6.1.4.1.10418.26.2.5.16.1.9 | ColumnacsPowerMgmtUPSOutputTableRMSCurrentL1 | read-only | current | System output RMS current for line L1. |
| 1.3.6.1.4.1.10418.26.2.5.16.1.10 | ColumnacsPowerMgmtUPSOutputTableRMSCurrentL2 | read-only | current | System output RMS current for line L2. |
| 1.3.6.1.4.1.10418.26.2.5.16.1.11 | ColumnacsPowerMgmtUPSOutputTableRMSVoltageL1N | read-only | current | The system output RMS voltage. |
| 1.3.6.1.4.1.10418.26.2.5.16.1.12 | ColumnacsPowerMgmtUPSOutputTableRMSVoltageL2N | read-only | current | The system output RMS voltage. |
| 1.3.6.1.4.1.10418.26.2.5.16.1.13 | ColumnacsPowerMgmtUPSOutputTableRMSVoltageL1L2 | read-only | current | The system output RMS voltage. |
| 1.3.6.1.4.1.10418.26.2.5.16.1.14 | ColumnacsPowerMgmtUPSOutputOffDelay | read-write | current | Turns the UPS output off after the number of seconds specified. When a value is written to this object the output will be turned off after the specified time h… |
| 1.3.6.1.4.1.10418.26.2.5.16.1.15 | ColumnacsPowerMgmtUPSOutputOnDelay | read-write | current | Turns the UPS output on after the number of seconds specified. When a value is written to this object the output will be turned on after the specified time has… |
| 1.3.6.1.4.1.10418.26.2.5.16.1.16 | ColumnacsPowerMgmtUPSOutputCycleDelay | read-write | current | Turns the UPS off and then back on after the number of seconds specified. When a value is written to this object the output will turned off immediately and the… |
| 1.3.6.1.4.1.10418.26.2.5.16.1.17 | ColumnacsPowerMgmtUPSOutputTableMaxVoltageL1 | read-only | current | The maximum system output voltage measurement for line 1 since the last reset. |
| 1.3.6.1.4.1.10418.26.2.5.16.1.18 | ColumnacsPowerMgmtUPSOutputTableMinVoltageL1 | read-only | current | The minimum system output voltage measurement for line 1 since the last reset. |
| 1.3.6.1.4.1.10418.26.2.5.16.1.19 | ColumnacsPowerMgmtUPSOutputTableMaxVoltageL2 | read-only | current | The maximum system output voltage measurement for line 21 since the last reset. |
| 1.3.6.1.4.1.10418.26.2.5.16.1.20 | ColumnacsPowerMgmtUPSOutputTableMinVoltageL2 | read-only | current | The minimum system output voltage measurement for line 2 since the last reset. |
| 1.3.6.1.4.1.10418.26.2.5.16.1.21 | ColumnacsPowerMgmtUPSOutputTableNominalVoltage | read-only | current | The nominal (or rated) system output voltage. |
| 1.3.6.1.4.1.10418.26.2.5.16.1.22 | ColumnacsPowerMgmtUPSOutputTablePowerNominalFrequency | read-only | current | The nominal (or rated) system output frequency. |
| 1.3.6.1.4.1.10418.26.2.5.16.1.23 | ColumnacsPowerMgmtUPSOutputTablePowerApparentPowerRating | read-only | current | Output apparent power rating. |
| 1.3.6.1.4.1.10418.26.2.5.16.1.24 | ColumnacsPowerMgmtUPSOutputTablePowerNominalPowerFactor | read-only | current | The nominal (or rated) system power factor. |
| 1.3.6.1.4.1.10418.26.2.5.16.1.25 | ColumnacsPowerMgmtUPSOutputTablePowerPowerFactorCorrection | read-only | current | The state of the power factor correction circuitry of the system. |
| 1.3.6.1.4.1.10418.26.2.5.16.1.26 | ColumnacsPowerMgmtUPSOutputTablePowerL1 | read-only | current | The system output power on line 1. |
| 1.3.6.1.4.1.10418.26.2.5.16.1.27 | ColumnacsPowerMgmtUPSOutputTablePowerL2 | read-only | current | The system output power on line 2. |
| 1.3.6.1.4.1.10418.26.2.5.16.1.28 | ColumnacsPowerMgmtUPSOutputTableApparentPowerL1 | read-only | current | The system output apparent power on line 1. |
| 1.3.6.1.4.1.10418.26.2.5.16.1.29 | ColumnacsPowerMgmtUPSOutputTableApparentPowerL2 | read-only | current | The system output apparent power on line 2. |
| 1.3.6.1.4.1.10418.26.2.5.16.1.30 | ColumnacsPowerMgmtUPSOutputTablePowerFactorL1 | read-only | current | The system output power factor on line 1. |
| 1.3.6.1.4.1.10418.26.2.5.16.1.31 | ColumnacsPowerMgmtUPSOutputTablePowerFactorL2 | read-only | current | The system output power factor on line 2. |
| 1.3.6.1.4.1.10418.26.2.5.17 | TableacsPowerMgmtUPSEcoModeTable | not-accessible | current | This table contains the information about UPS ECO Mode. |
| 1.3.6.1.4.1.10418.26.2.5.17.1 | RowacsPowerMgmtUPSEcoModeTableEntry | not-accessible | current | each entry has the information about the UPS ECO Mode. |
| 1.3.6.1.4.1.10418.26.2.5.17.1.1 | ColumnacsPowerMgmtUPSEcoModeTablePortNumber | read-only | current | Serial Port number. |
| 1.3.6.1.4.1.10418.26.2.5.17.1.2 | ColumnacsPowerMgmtUPSEcoModeTableUpsIndex | read-only | current | Index. |
| 1.3.6.1.4.1.10418.26.2.5.17.1.3 | ColumnacsPowerMgmtUPSEcoModeTableStatus | read-only | current | Current ECO Mode Status. |
| 1.3.6.1.4.1.10418.26.2.5.17.1.4 | ColumnacsPowerMgmtUPSEcoModeTableStateControl | read-write | current | Enable or disable ECO mode. |
| 1.3.6.1.4.1.10418.26.2.5.18 | TableacsPowerMgmtUPSOutletGroupTable | not-accessible | current | This table contains the UPS Outlet Group Information. |
| 1.3.6.1.4.1.10418.26.2.5.18.1 | RowacsPowerMgmtUPSOutletGroupTableEntry | not-accessible | current | Each entry has the UPS outlet group information. |
| 1.3.6.1.4.1.10418.26.2.5.18.1.1 | ColumnacsPowerMgmtUPSOutletGroupTablePortNumber | read-only | current | Serial Port number. |
| 1.3.6.1.4.1.10418.26.2.5.18.1.2 | ColumnacsPowerMgmtUPSOutletGroupTableUpsIndex | read-only | current | Index. |
| 1.3.6.1.4.1.10418.26.2.5.18.1.3 | ColumnacsPowerMgmtUPSOutletGroupTableNumber | read-only | current | Number of the outletgroup in the UPS. |
| 1.3.6.1.4.1.10418.26.2.5.18.1.4 | ColumnacsPowerMgmtUPSOutletGroupTableLabel | read-only | current | User-defined label for the outlet group. |
| 1.3.6.1.4.1.10418.26.2.5.18.1.5 | ColumnacsPowerMgmtUPSOutletGroupTableState | read-only | current | User-defined label for the outlet group. |
| 1.3.6.1.4.1.10418.26.2.5.18.1.6 | ColumnacsPowerMgmtUPSOutletGroupTablePowerControl | read-write | current | A set value of power(2-6) will send command to the UPS. noAction(1) = always returned in a GET. Does nothing if SET. powerOn(2) = when SET the power On command… |
| 1.3.6.1.4.1.10418.26.2.6 | NodeacsTrapObject | |||
| 1.3.6.1.4.1.10418.26.2.7 | NodeacsSensors | |||
| 1.3.6.1.4.1.10418.26.2.7.1 | ScalaracsSensorsInternalCurrentCPUTemperature | read-only | current | The current CPU temperature in degrees Celsius. |
| 1.3.6.1.4.1.10418.26.2.7.2 | ScalaracsSensorsInternalMaxCPUTemperature | read-write | current | The CPU temperature in degrees Celsius that, if exceeded, will generate an event notification. |
| 1.3.6.1.4.1.10418.26.2.7.3 | ScalaracsSensorsInternalMaxCPUTemperatureThreshold | read-write | current | The CPU temperature threshold in degrees Celsius below the maximum CPU temperature. When the temperature exceeds the Maximum Temperature plus Threshold, an eve… |
| 1.3.6.1.4.1.10418.26.2.7.4 | ScalaracsSensorsInternalMinCPUTemperature | read-write | current | The CPU temperature in degrees Celsius that, if the CPU temperature falls below, will generate an event notification. |
| 1.3.6.1.4.1.10418.26.2.7.5 | ScalaracsSensorsInternalMinCPUTemperatureThreshold | read-write | current | The CPU temperature threshold in degrees Celsius above the minimum CPU temperature. |
| 1.3.6.1.4.1.10418.26.2.7.6 | ScalaracsSensorsInternalCurrentBoardTemperature | read-only | current | The current board temperature in degrees Celsius. |
| 1.3.6.1.4.1.10418.26.2.7.7 | ScalaracsSensorsInternalMaxBoardTemperature | read-write | current | The board temperature in degrees Celsius that, if exceeded, will generate an event notification. |
| 1.3.6.1.4.1.10418.26.2.7.8 | ScalaracsSensorsInternalMaxBoardTemperatureThreshold | read-write | current | The board temperature threshold in degrees Celsius below the maximum board temperature. When the temperature exceeds the Maximum Temperature plus Threshold, an… |
| 1.3.6.1.4.1.10418.26.2.7.9 | ScalaracsSensorsInternalMinBoardTemperature | read-write | current | The board temperature in degrees Celsius that, if the board temperature falls below, will generate an event notification. |
| 1.3.6.1.4.1.10418.26.2.7.10 | ScalaracsSensorsInternalMinBoardTemperatureThreshold | read-write | current | The board temperature threshold in degrees Celsius above the minimum board temperature. |
| 1.3.6.1.4.1.10418.26.2.7.11 | ScalaracsSensorsVoltagePSInternal | read-only | current | The PS Internal Supply voltage [0.95v ~ 1.05v] x 100. |
| 1.3.6.1.4.1.10418.26.2.7.12 | ScalaracsSensorsVoltagePLInternal | read-only | current | The PL Internal Supply voltage [0.95v ~ 1.05v] x 100. |
| 1.3.6.1.4.1.10418.26.2.7.13 | ScalaracsSensorsVoltagePSAuxiliary | read-only | current | The PS Auxiliary Supply voltage [1.71v ~ 1.89v] x 100. |
| 1.3.6.1.4.1.10418.26.2.7.14 | ScalaracsSensorsVoltagePLAuxiliary | read-only | current | The PL Auxiliary Supply voltage [1.71v ~ 1.89v] x 100. |
| 1.3.6.1.4.1.10418.26.2.7.15 | ScalaracsSensorsVoltagePSDDR3 | read-only | current | The PS DDR3 Supply voltage [1.31v ~ 1.39v] x 100. |
| 1.3.6.1.4.1.10418.26.2.7.16 | ScalaracsSensorsVoltagePLBlockRam | read-only | current | The PL Block RAM Supply voltage [0.95v ~ 1.05v] x 100. |
| 1.3.6.1.4.1.10418.26.2.7.17 | ScalaracsSensorsVoltagePowerSupply1 | read-only | current | The Power Supply 1 voltage [11.06v ~ 12.98v] x 100. |
| 1.3.6.1.4.1.10418.26.2.7.18 | ScalaracsSensorsVoltagePowerSupply2 | read-only | current | The Power Supply 2 voltage [11.06v ~ 12.98v] x 100. |
| 1.3.6.1.4.1.10418.26.2.7.19 | ScalaracsSensors1WireUpdateControl | read-write | current | A set value of update(2) will refresh the 1-wire sensor list. |
| 1.3.6.1.4.1.10418.26.2.7.20 | TableacsSensors1WireTable | not-accessible | current | This table contains the list of detected external 1-wire sensors. |
| 1.3.6.1.4.1.10418.26.2.7.20.1 | RowacsSensors1WireTableEntry | not-accessible | current | Each entry has the information about the external 1-wire sensor. |
| 1.3.6.1.4.1.10418.26.2.7.20.1.1 | ColumnacsSensors1WireTableIndex | read-only | current | Index of detected 1-wire sensor. |
| 1.3.6.1.4.1.10418.26.2.7.20.1.2 | ColumnacsSensors1WireTableName | read-write | current | Name of the 1-wire sensor. |
| 1.3.6.1.4.1.10418.26.2.7.20.1.3 | ColumnacsSensors1WireTableLocation | read-write | current | Location of the 1-wire sensor. |
| 1.3.6.1.4.1.10418.26.2.7.20.1.4 | ColumnacsSensors1WireTableAddress | read-only | current | Address of the 1-wire sensor. |
| 1.3.6.1.4.1.10418.26.2.7.20.1.5 | ColumnacsSensors1WireTableType | read-only | current | Type of 1-wire sensor. |
| 1.3.6.1.4.1.10418.26.2.7.20.1.6 | ColumnacsSensors1WireTableUnit | read-only | current | The unit of the 1-wire sensor. notApplicable(0) = used for contact or leak sensor celsius(1) = used for temperature sensor fahrenheit(2) = used for temperature… |
| 1.3.6.1.4.1.10418.26.2.7.20.1.7 | ColumnacsSensors1WireTableValue | read-only | current | Current sensor reading. |
| 1.3.6.1.4.1.10418.26.2.7.20.1.8 | ColumnacsSensors1WireTableValueMax | read-only | current | Maximum sensor reading detected. Unit is specified in acsSensors1WireTableUnit. |
| 1.3.6.1.4.1.10418.26.2.7.20.1.9 | ColumnacsSensors1WireTableValueMin | read-only | current | Minimum sensor reading detected. Unit is specified in acsSensors1WireTableUnit. |
| 1.3.6.1.4.1.10418.26.2.7.20.1.10 | ColumnacsSensors1WireTableValueAvg | read-only | current | Average sensor reading detected. Unit is specified in acsSensors1WireTableUnit. |
| 1.3.6.1.4.1.10418.26.2.7.20.1.11 | ColumnacsSensors1WireTableValueLowWarning | read-only | current | If the sensor value falls below this value, an event notification will be generated. Unit is specified in acsSensors1WireTableUnit. |
| 1.3.6.1.4.1.10418.26.2.7.20.1.12 | ColumnacsSensors1WireTableValueLowCritical | read-write | current | If the sensor value falls below this value, an event notification will be generated. Unit is specified in acsSensors1WireTableUnit. |
| 1.3.6.1.4.1.10418.26.2.7.20.1.13 | ColumnacsSensors1WireTableValueHighWarning | read-write | current | If the sensor value rises above this value, an event notification will be generated. Unit is specified in acsSensors1WireTableUnit. |
| 1.3.6.1.4.1.10418.26.2.7.20.1.14 | ColumnacsSensors1WireTableValueHighCritical | read-write | current | If the sensor value rises above this value, an event notification will be generated. Unit is specified in acsSensors1WireTableUnit. |
| 1.3.6.1.4.1.10418.26.2.7.20.1.15 | ColumnacsSensors1WireTableReset | read-write | current | A set value of update(2) will reset the 1-wire sensor min/max/avg values. |
| 1.3.6.1.4.1.10418.26.2.7.20.1.16 | ColumnacsSensors1WireTableAnalogAlarm | read-write | current | Status of the 1-wire analog sensor alarm. Used for temperature, humidity, and differential pressure sensors only. For all other sensor types the value notAppli… |
| 1.3.6.1.4.1.10418.26.2.7.20.1.17 | ColumnacsSensors1WireTableContactAlarm1 | read-write | current | Status of the 1-wire contact sensor alarm. Used for door and dry contact sensors only. For all other sensor types the value notApplicable(0) will be returned. |
| 1.3.6.1.4.1.10418.26.2.7.20.1.18 | ColumnacsSensors1WireTableContactAlarm2 | read-write | current | Status of the 1-wire contact sensor alarm. Used for door and dry contact sensors only. For all other sensor types the value notApplicable(0) will be returned. |
| 1.3.6.1.4.1.10418.26.2.7.20.1.19 | ColumnacsSensors1WireTableContactAlarm3 | read-write | current | Status of the 1-wire contact sensor alarm. Used for door and dry contact sensors only. For all other sensor types the value notApplicable(0) will be returned. |
| 1.3.6.1.4.1.10418.26.2.7.20.1.20 | ColumnacsSensors1WireTableLeakFilterTime | read-write | current | Leak filter time in seconds. |
| 1.3.6.1.4.1.10418.26.2.7.20.1.21 | ColumnacsSensors1WireTableLeakAlarm | read-write | current | Status of the leak alarm for the leak sensor. Used for leak sensors only. For all other sensor types the value notApplicable(0) will be returned. |
| 1.3.6.1.4.1.10418.26.2.7.20.1.22 | ColumnacsSensors1WireTableLeakCableFailAlarm | read-write | current | Status of the cable fail alarm for the leak sensor. Used for leak sensors only. For all other sensor types the value notApplicable(0) will be returned. |
| 1.3.6.1.4.1.10418.26.2.7.21 | TableacsSensorsDigitalInTable | not-accessible | current | This table contains the list of Digital In sensors. |
| 1.3.6.1.4.1.10418.26.2.7.21.1 | RowacsSensorsDigitalInTableEntry | not-accessible | current | Each entry has the information about the Digital In sensor. |
| 1.3.6.1.4.1.10418.26.2.7.21.1.1 | ColumnacsSensorsDigitalInTablePosition | read-only | current | Position of the Digital In sensor. |
| 1.3.6.1.4.1.10418.26.2.7.21.1.2 | ColumnacsSensorsDigitalInTableName | read-write | current | Name of the Digital In sensor. |
| 1.3.6.1.4.1.10418.26.2.7.21.1.3 | ColumnacsSensorsDigitalInTableLocation | read-write | current | Location of the Digital In sensor. |
| 1.3.6.1.4.1.10418.26.2.7.21.1.4 | ColumnacsSensorsDigitalInTableType | read-write | current | Configurable type of Digital In sensor. |
| 1.3.6.1.4.1.10418.26.2.7.21.1.5 | ColumnacsSensorsDigitalInTableValue | read-only | current | Value of the Digital In sensor. |
| 1.3.6.1.4.1.10418.26.2.7.21.1.6 | ColumnacsSensorsDigitalInTableAlarm | read-write | current | Status of the Digital In sensor alarm. |
| 1.3.6.1.4.1.10418.26.2.8 | NodeacsModems | |||
| 1.3.6.1.4.1.10418.26.2.8.1 | ScalaracsModemsNumberOfModems | read-only | current | Number of modems, including auxiliary port built-in modems, pluggable USB modems, and serial port modems. |
| 1.3.6.1.4.1.10418.26.2.8.2 | TableacsModemsTable | not-accessible | current | This table contains information about the ACS modems, including auxiliary port built-in modem, pluggable USB modems, and serial port modems. |
| 1.3.6.1.4.1.10418.26.2.8.2.1 | RowacsModemsTableEntry | not-accessible | current | Each entry has the information about a specific modem. |
| 1.3.6.1.4.1.10418.26.2.8.2.1.1 | ColumnacsModemsTableNumber | read-only | current | A unique index representing an entry in this table. |
| 1.3.6.1.4.1.10418.26.2.8.2.1.2 | ColumnacsModemsTableDeviceName | read-only | current | The associated device name for the modem. |
| 1.3.6.1.4.1.10418.26.2.8.2.1.3 | ColumnacsModemsTableStatus | read-write | current | Enables or disbles the modem. |
| 1.3.6.1.4.1.10418.26.2.8.2.1.4 | ColumnacsModemsTableProfile | read-write | current | The modem profile. For an integrated cell modem, only dial-out(3) is valid. |
| 1.3.6.1.4.1.10418.26.2.8.2.1.5 | ColumnacsModemsTablePhoneNumber | read-write | current | The dial-out phone number. Only supported if acsModemsTableProfile is set to dial-out(3). Not used for integrated cellular modem. |
| 1.3.6.1.4.1.10418.26.2.8.2.1.6 | ColumnacsModemsTableComSpeed | read-write | current | The modem speed. Speeds above 230400 not supported by serial port modems. |
| 1.3.6.1.4.1.10418.26.2.8.2.1.7 | ColumnacsModemsTableInitChat | read-write | current | Modem initialization string. |
| 1.3.6.1.4.1.10418.26.2.8.2.1.8 | ColumnacsModemsTablePppAddressConfig | read-write | current | Supported only if acsModemsTableProfile is set to dial-out(2). If none(1) or remote(3) is set, then the IP address fields will be cleared. When at least one IP… |
| 1.3.6.1.4.1.10418.26.2.8.2.1.9 | ColumnacsModemsTableLocalIpv4Address | read-write | current | Configures the local IPv4 address for the PPP connection. |
| 1.3.6.1.4.1.10418.26.2.8.2.1.10 | ColumnacsModemsTableRemoteIpv4Address | read-write | current | Configures the remote IPv4 address for the PPP connection. |
| 1.3.6.1.4.1.10418.26.2.8.2.1.11 | ColumnacsModemsTableLocalIPv6Address | read-write | current | Configures the local IPv6 address for the PPP connection. |
| 1.3.6.1.4.1.10418.26.2.8.2.1.12 | ColumnacsModemsTableRemoteIPv6Address | read-write | current | Configures the remote IPv6 address for the PPP connection. |
| 1.3.6.1.4.1.10418.26.2.8.2.1.13 | ColumnacsModemsTablePppAuthentication | read-write | current | Configure the PPP authentication protocol. If this is set to remoteChap(5) or remotePap(6), then you must also set acsModemsTablePppRemoteUsername and acsModem… |
| 1.3.6.1.4.1.10418.26.2.8.2.1.14 | ColumnacsModemsTablePppRemoteUsername | read-write | current | Only used if acsModemsTablePppAuthentication is set to remoteChap(5) or remotePap(6). |
| 1.3.6.1.4.1.10418.26.2.8.2.1.15 | ColumnacsModemsTablePppRemotePassphrase | read-write | current | Only used if acsModemsTablePppAuthentication is set to remoteChap(5) or remotePap(6). |
| 1.3.6.1.4.1.10418.26.2.8.2.1.16 | ColumnacsModemsTableChapInterval | read-write | current | CHAP Interval in seconds. Default is 0. Not used for integrated cellular modem. |
| 1.3.6.1.4.1.10418.26.2.8.2.1.17 | ColumnacsModemsTableChapMaxChallenge | read-write | current | CHAP Max Challenge value in seconds. Default is 10 seconds. Not used for integrated cellular modem. |
| 1.3.6.1.4.1.10418.26.2.8.2.1.18 | ColumnacsModemsTableChapRestart | read-write | current | CHAP Restart value in seconds. Default is 3 seconds. Not used for integrated cellular modem. |
| 1.3.6.1.4.1.10418.26.2.8.2.1.19 | ColumnacsModemsTablePppIdleTimeout | read-write | current | PPP idle timeout value in seconds. Default is 0. Not used for integrated cellular modem. |
| 1.3.6.1.4.1.10418.26.2.8.2.1.20 | ColumnacsModemsTableModel | read-only | current | Modem vendor model name. Only used for integrated cellular modem. |
| 1.3.6.1.4.1.10418.26.2.8.2.1.21 | ColumnacsModemsTableCellProvider | read-only | current | Cellular modem service provider. Only used for integrated cellular modem. |
| 1.3.6.1.4.1.10418.26.2.8.2.1.22 | ColumnacsModemsTableCellRegistration | read-only | current | Cellular modem network registration. Only used for integrated cellular modem. |
| 1.3.6.1.4.1.10418.26.2.8.2.1.23 | ColumnacsModemsTableCCID | read-only | current | SIM integrated circuit card identifier. Only used for integrated cellular modem. |
| 1.3.6.1.4.1.10418.26.2.8.2.1.24 | ColumnacsModemsTableIMSI | read-only | current | International mobile subscriber identity. Only used for integrated cellular modem. |
| 1.3.6.1.4.1.10418.26.2.8.2.1.25 | ColumnacsModemsTableIMEI | read-only | current | International mobile equipment identity. Only used for integrated cellular modem. |
| 1.3.6.1.4.1.10418.26.2.8.2.1.26 | ColumnacsModemsTableCellStatus | read-only | current | Shows the status of the cellular modem. Only used for integrated cellular modem. |
| 1.3.6.1.4.1.10418.26.2.8.2.1.27 | ColumnacsModemsTableAPN | read-write | current | Access point name. Only used for integrated cellular modem. |
| 1.3.6.1.4.1.10418.26.2.8.2.1.28 | ColumnacsModemsTableMtuSize | read-only | current | The maxiumum transmission unit size for use by the integrated cellular modem. |
| 1.3.6.1.4.1.10418.26.2.8.2.1.29 | ColumnacsModemsTableReplaceDefaultRoute | read-write | current | If this is set to enabled(2), then the integrated cellular modem becomes the default gateway. Only used for integrated cellular modem. |
| 1.3.6.1.4.1.10418.26.2.8.2.1.30 | ColumnacsModemsTablePersistMode | read-write | current | If this is set to 'yes' then the integrated cellular modem connection persists. Only used for integrated cellular modem. |
| 1.3.6.1.4.1.10418.26.2.8.2.1.31 | ColumnacsModemsTableSignalQualityCheck | read-write | current | Check the signal quality of the integrated cellular modem. This turns on the modem transceiver to get the signal. The signal quality can be read in acsModemsTa… |
| 1.3.6.1.4.1.10418.26.2.8.2.1.32 | ColumnacsModemsTableSignalQualityDisplay | read-write | current | Displays the last read signal quality of the integrated cellular modem. To refresh this value write signalCheck(2) to acsModemsTableSignalQualityCheck. |
| 1.3.6.1.4.1.10418.26.2.8.2.1.33 | ColumnacsModemsTableSIMStatus | read-only | current | Status of the modem SIM card. Only used for integrated cellular modem. |
| 1.3.6.1.4.1.10418.26.2.8.2.1.34 | ColumnacsModemsTableSIMPINEntry | read-write | current | Modem SIM card PIN/Password entry. Writable only if acsModemsTableSIMStatus returns waitingForPIN(2). Only used for integrated cellular modem. |
| 1.3.6.1.4.1.10418.26.2.8.2.1.35 | ColumnacsModemsTableSIMUnlockCodeEntry | read-write | current | Modem SIM card Unlock Code entry. Writable only if acsModemsTableSIMStatus returns waitingForUnlockCode(3). Only used for integrated cellular modem. |
| 1.3.6.1.4.1.10418.26.2.8.2.1.36 | ColumnacsModemsTableCellTestLastStarted | read-only | current | The timestamp of the last time the Cell Modem IP Test started running. Only used for integrated cellular modem. |
| 1.3.6.1.4.1.10418.26.2.8.2.1.37 | ColumnacsModemsTableCellTestLastResult | read-only | current | The result of the last time the Cell Modem IP Test was run. Only used for integrated cellular modem. |