ADSL-LINE-MIB
276 objects
The MIB module defining objects for the management of a pair of ADSL modems at each end of the ADSL line. Each such line has an entry in an ifTable which may include multiple modem lines. An agent may reside at either end of the ADSL line however the MIB is designed to require no management communication between them beyond that inherent in the low-level ADSL line protocol. The agent may monitor and control this protocol for its needs. ADSL lines may support optional Fast or Interleaved channels. If these are supported, additional entries corresponding to the supported channels must be created in the ifTable. Thus an ADSL line that supports both channels will have three entries in the ifTable, one for each physical, fast, and interleaved, whose ifType values are equal to adsl(94), fast(125), and interleaved(124), respectively. The ifStackTable is used to represent the relationship between the entries. Naming Conventions: Atuc Atur Curr Prev Atn ES LCS Lof Lol Los Lpr xxxs (e.g., xxx=Lof, Los, Lpr) Max Mgn Min Psd Snr Tx Blks adslAtuXChanCrcBlockLength
Imported Objects
| ADSL-TC-MIB | AdslLineCodingType AdslPerfCurrDayCount AdslPerfPrevDayCount AdslPerfTimeElapsed |
| IF-MIB | ifIndex |
| PerfHist-TC-MIB | PerfCurrentCount PerfIntervalCount |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE transmission Unsigned32 |
| SNMPv2-TC | RowStatus TruthValue VariablePointer |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.10.94 | IdentityadslMIB | The MIB module defining objects for the management of a pair of ADSL modems at each end of the ADSL line. Each such line has an entry in an ifTable which may i… | ||
| 1.3.6.1.2.1.10.94.1 | NodeadslLineMib | |||
| 1.3.6.1.2.1.10.94.1.1 | NodeadslMibObjects | |||
| 1.3.6.1.2.1.10.94.1.1.1 | TableadslLineTable | not-accessible | current | This table includes common attributes describing both ends of the line. It is required for all ADSL physical interfaces. ADSL physical interfaces are those ifE… |
| 1.3.6.1.2.1.10.94.1.1.1.1 | RowadslLineEntry | not-accessible | current | An entry in adslLineTable. |
| 1.3.6.1.2.1.10.94.1.1.1.1.1 | ColumnadslLineCoding | read-only | current | Specifies the ADSL coding type used on this line. |
| 1.3.6.1.2.1.10.94.1.1.1.1.2 | ColumnadslLineType | read-only | current | Defines the type of ADSL physical line entity that exists, by defining whether and how the line is channelized. If the line is channelized, the value will be o… |
| 1.3.6.1.2.1.10.94.1.1.1.1.3 | ColumnadslLineSpecific | read-only | current | OID instance in vendor-specific MIB. The Instance may be used to determine shelf/slot/port of the ATUC interface in a DSLAM. |
| 1.3.6.1.2.1.10.94.1.1.1.1.4 | ColumnadslLineConfProfile | read-write | current | The value of this object identifies the row in the ADSL Line Configuration Profile Table, (adslLineConfProfileTable), which applies for this ADSL line, and cha… |
| 1.3.6.1.2.1.10.94.1.1.1.1.5 | ColumnadslLineAlarmConfProfile | read-write | current | The value of this object identifies the row in the ADSL Line Alarm Configuration Profile Table, (adslLineAlarmConfProfileTable), which applies to this ADSL lin… |
| 1.3.6.1.2.1.10.94.1.1.2 | TableadslAtucPhysTable | not-accessible | current | This table provides one row for each ATUC. Each row contains the Physical Layer Parameters table for that ATUC. ADSL physical interfaces are those ifEntries wh… |
| 1.3.6.1.2.1.10.94.1.1.2.1 | RowadslAtucPhysEntry | not-accessible | current | An entry in the adslAtucPhysTable. |
| 1.3.6.1.2.1.10.94.1.1.2.1.1 | ColumnadslAtucInvSerialNumber | read-only | current | The vendor specific string that identifies the vendor equipment. |
| 1.3.6.1.2.1.10.94.1.1.2.1.2 | ColumnadslAtucInvVendorID | read-only | current | The vendor ID code is a copy of the binary vendor identification field defined by the PHY[10] and expressed as readable characters. |
| 1.3.6.1.2.1.10.94.1.1.2.1.3 | ColumnadslAtucInvVersionNumber | read-only | current | The vendor specific version number sent by this ATU as part of the initialization messages. It is a copy of the binary version number field defined by the PHY[… |
| 1.3.6.1.2.1.10.94.1.1.2.1.4 | ColumnadslAtucCurrSnrMgn | read-only | current | Noise Margin as seen by this ATU with respect to its received signal in tenth dB. |
| 1.3.6.1.2.1.10.94.1.1.2.1.5 | ColumnadslAtucCurrAtn | read-only | current | Measured difference in the total power transmitted by the peer ATU and the total power received by this ATU. |
| 1.3.6.1.2.1.10.94.1.1.2.1.6 | ColumnadslAtucCurrStatus | read-only | current | Indicates current state of the ATUC line. This is a bit-map of possible conditions. The various bit positions are: 0 noDefect There no defects on the line 1 lo… |
| 1.3.6.1.2.1.10.94.1.1.2.1.7 | ColumnadslAtucCurrOutputPwr | read-only | current | Measured total output power transmitted by this ATU. This is the measurement that was reported during the last activation sequence. |
| 1.3.6.1.2.1.10.94.1.1.2.1.8 | ColumnadslAtucCurrAttainableRate | read-only | current | Indicates the maximum currently attainable data rate by the ATU. This value will be equal or greater than the current line rate. |
| 1.3.6.1.2.1.10.94.1.1.3 | TableadslAturPhysTable | not-accessible | current | This table provides one row for each ATUR Each row contains the Physical Layer Parameters table for that ATUR. ADSL physical interfaces are those ifEntries whe… |
| 1.3.6.1.2.1.10.94.1.1.3.1 | RowadslAturPhysEntry | not-accessible | current | An entry in the adslAturPhysTable. |
| 1.3.6.1.2.1.10.94.1.1.3.1.1 | ColumnadslAturInvSerialNumber | read-only | current | The vendor specific string that identifies the vendor equipment. |
| 1.3.6.1.2.1.10.94.1.1.3.1.2 | ColumnadslAturInvVendorID | read-only | current | The vendor ID code is a copy of the binary vendor identification field defined by the PHY[10] and expressed as readable characters. |
| 1.3.6.1.2.1.10.94.1.1.3.1.3 | ColumnadslAturInvVersionNumber | read-only | current | The vendor specific version number sent by this ATU as part of the initialization messages. It is a copy of the binary version number field defined by the PHY[… |
| 1.3.6.1.2.1.10.94.1.1.3.1.4 | ColumnadslAturCurrSnrMgn | read-only | current | Noise Margin as seen by this ATU with respect to its received signal in tenth dB. |
| 1.3.6.1.2.1.10.94.1.1.3.1.5 | ColumnadslAturCurrAtn | read-only | current | Measured difference in the total power transmitted by the peer ATU and the total power received by this ATU. |
| 1.3.6.1.2.1.10.94.1.1.3.1.6 | ColumnadslAturCurrStatus | read-only | current | Indicates current state of the ATUR line. This is a bit-map of possible conditions. Due to the isolation of the ATUR when line problems occur, many state condi… |
| 1.3.6.1.2.1.10.94.1.1.3.1.7 | ColumnadslAturCurrOutputPwr | read-only | current | Measured total output power transmitted by this ATU. This is the measurement that was reported during the last activation sequence. |
| 1.3.6.1.2.1.10.94.1.1.3.1.8 | ColumnadslAturCurrAttainableRate | read-only | current | Indicates the maximum currently attainable data rate by the ATU. This value will be equal or greater than the current line rate. |
| 1.3.6.1.2.1.10.94.1.1.4 | TableadslAtucChanTable | not-accessible | current | This table provides one row for each ATUC channel. ADSL channel interfaces are those ifEntries where ifType is equal to adslInterleave(124) or adslFast(125). |
| 1.3.6.1.2.1.10.94.1.1.4.1 | RowadslAtucChanEntry | not-accessible | current | An entry in the adslAtucChanTable. |
| 1.3.6.1.2.1.10.94.1.1.4.1.1 | ColumnadslAtucChanInterleaveDelay | read-only | current | Interleave Delay for this channel. Interleave delay applies only to the interleave channel and defines the mapping (relative spacing) between subsequent input … |
| 1.3.6.1.2.1.10.94.1.1.4.1.2 | ColumnadslAtucChanCurrTxRate | read-only | current | Actual transmit rate on this channel. |
| 1.3.6.1.2.1.10.94.1.1.4.1.3 | ColumnadslAtucChanPrevTxRate | read-only | current | The rate at the time of the last adslAtucRateChangeTrap event. It is also set at initialization to prevent a trap being sent. Rate changes less than adslAtucTh… |
| 1.3.6.1.2.1.10.94.1.1.4.1.4 | ColumnadslAtucChanCrcBlockLength | read-only | current | Indicates the length of the channel data-block on which the CRC operates. Refer to Line Code Specific MIBs, [11] and [12] for more information. |
| 1.3.6.1.2.1.10.94.1.1.5 | TableadslAturChanTable | not-accessible | current | This table provides one row for each ATUR channel. ADSL channel interfaces are those ifEntries where ifType is equal to adslInterleave(124) or adslFast(125). |
| 1.3.6.1.2.1.10.94.1.1.5.1 | RowadslAturChanEntry | not-accessible | current | An entry in the adslAturChanTable. |
| 1.3.6.1.2.1.10.94.1.1.5.1.1 | ColumnadslAturChanInterleaveDelay | read-only | current | Interleave Delay for this channel. Interleave delay applies only to the interleave channel and defines the mapping (relative spacing) between subsequent input … |
| 1.3.6.1.2.1.10.94.1.1.5.1.2 | ColumnadslAturChanCurrTxRate | read-only | current | Actual transmit rate on this channel. |
| 1.3.6.1.2.1.10.94.1.1.5.1.3 | ColumnadslAturChanPrevTxRate | read-only | current | The rate at the time of the last adslAturRateChangeTrap event. It is also set at initialization to prevent a trap being sent. Rate changes less than adslAturTh… |
| 1.3.6.1.2.1.10.94.1.1.5.1.4 | ColumnadslAturChanCrcBlockLength | read-only | current | Indicates the length of the channel data-block on which the CRC operates. Refer to Line Code Specific MIBs, [11] and [12] for more information. |
| 1.3.6.1.2.1.10.94.1.1.6 | TableadslAtucPerfDataTable | not-accessible | current | This table provides one row for each ATUC. ADSL physical interfaces are those ifEntries where ifType is equal to adsl(94). |
| 1.3.6.1.2.1.10.94.1.1.6.1 | RowadslAtucPerfDataEntry | not-accessible | current | An entry in adslAtucPerfDataTable. |
| 1.3.6.1.2.1.10.94.1.1.6.1.1 | ColumnadslAtucPerfLofs | read-only | current | Count of the number of Loss of Framing failures since agent reset. |
| 1.3.6.1.2.1.10.94.1.1.6.1.2 | ColumnadslAtucPerfLoss | read-only | current | Count of the number of Loss of Signal failures since agent reset. |
| 1.3.6.1.2.1.10.94.1.1.6.1.3 | ColumnadslAtucPerfLols | read-only | current | Count of the number of Loss of Link failures since agent reset. |
| 1.3.6.1.2.1.10.94.1.1.6.1.4 | ColumnadslAtucPerfLprs | read-only | current | Count of the number of Loss of Power failures since agent reset. |
| 1.3.6.1.2.1.10.94.1.1.6.1.5 | ColumnadslAtucPerfESs | read-only | current | Count of the number of Errored Seconds since agent reset. The errored second parameter is a count of one-second intervals containing one or more crc anomalies,… |
| 1.3.6.1.2.1.10.94.1.1.6.1.6 | ColumnadslAtucPerfInits | read-only | current | Count of the line initialization attempts since agent reset. Includes both successful and failed attempts. |
| 1.3.6.1.2.1.10.94.1.1.6.1.7 | ColumnadslAtucPerfValidIntervals | read-only | current | The number of previous 15-minute intervals in the interval table for which data was collected. Given that <n> is the maximum # of intervals supported. The valu… |
| 1.3.6.1.2.1.10.94.1.1.6.1.8 | ColumnadslAtucPerfInvalidIntervals | read-only | current | The number of intervals in the range from 0 to the value of adslAtucPerfValidIntervals for which no data is available. This object will typically be zero excep… |
| 1.3.6.1.2.1.10.94.1.1.6.1.9 | ColumnadslAtucPerfCurr15MinTimeElapsed | read-only | current | Total elapsed seconds in this interval. |
| 1.3.6.1.2.1.10.94.1.1.6.1.10 | ColumnadslAtucPerfCurr15MinLofs | read-only | current | Count of seconds in the current 15 minute interval when there was Loss of Framing. |
| 1.3.6.1.2.1.10.94.1.1.6.1.11 | ColumnadslAtucPerfCurr15MinLoss | read-only | current | Count of seconds in the current 15 minute interval when there was Loss of Signal. |
| 1.3.6.1.2.1.10.94.1.1.6.1.12 | ColumnadslAtucPerfCurr15MinLols | read-only | current | Count of seconds in the current 15 minute interval when there was Loss of Link. |
| 1.3.6.1.2.1.10.94.1.1.6.1.13 | ColumnadslAtucPerfCurr15MinLprs | read-only | current | Count of seconds in the current 15 minute interval when there was Loss of Power. |
| 1.3.6.1.2.1.10.94.1.1.6.1.14 | ColumnadslAtucPerfCurr15MinESs | read-only | current | Count of Errored Seconds in the current 15 minute interval. The errored second parameter is a count of one-second intervals containing one or more crc anomalie… |
| 1.3.6.1.2.1.10.94.1.1.6.1.15 | ColumnadslAtucPerfCurr15MinInits | read-only | current | Count of the line initialization attempts in the current 15 minute interval. Includes both successful and failed attempts. |
| 1.3.6.1.2.1.10.94.1.1.6.1.16 | ColumnadslAtucPerfCurr1DayTimeElapsed | read-only | current | Number of seconds that have elapsed since the beginning of the current 1-day interval. |
| 1.3.6.1.2.1.10.94.1.1.6.1.17 | ColumnadslAtucPerfCurr1DayLofs | read-only | current | Count of the number of seconds when there was Loss of Framing during the current day as measured by adslAtucPerfCurr1DayTimeElapsed. |
| 1.3.6.1.2.1.10.94.1.1.6.1.18 | ColumnadslAtucPerfCurr1DayLoss | read-only | current | Count of the number of seconds when there was Loss of Signal during the current day as measured by adslAtucPerfCurr1DayTimeElapsed. |
| 1.3.6.1.2.1.10.94.1.1.6.1.19 | ColumnadslAtucPerfCurr1DayLols | read-only | current | Count of the number of seconds when there was Loss of Link during the current day as measured by adslAtucPerfCurr1DayTimeElapsed. |
| 1.3.6.1.2.1.10.94.1.1.6.1.20 | ColumnadslAtucPerfCurr1DayLprs | read-only | current | Count of the number of seconds when there was Loss of Power during the current day as measured by adslAtucPerfCurr1DayTimeElapsed. |
| 1.3.6.1.2.1.10.94.1.1.6.1.21 | ColumnadslAtucPerfCurr1DayESs | read-only | current | Count of Errored Seconds during the current day as measured by adslAtucPerfCurr1DayTimeElapsed. The errored second parameter is a count of one-second intervals… |
| 1.3.6.1.2.1.10.94.1.1.6.1.22 | ColumnadslAtucPerfCurr1DayInits | read-only | current | Count of the line initialization attempts in the day as measured by adslAtucPerfCurr1DayTimeElapsed. Includes both successful and failed attempts. |
| 1.3.6.1.2.1.10.94.1.1.6.1.23 | ColumnadslAtucPerfPrev1DayMoniSecs | read-only | current | The amount of time in the previous 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the int… |
| 1.3.6.1.2.1.10.94.1.1.6.1.24 | ColumnadslAtucPerfPrev1DayLofs | read-only | current | Count of seconds in the interval when there was Loss of Framing within the most recent previous 1-day period. |
| 1.3.6.1.2.1.10.94.1.1.6.1.25 | ColumnadslAtucPerfPrev1DayLoss | read-only | current | Count of seconds in the interval when there was Loss of Signal within the most recent previous 1-day period. |
| 1.3.6.1.2.1.10.94.1.1.6.1.26 | ColumnadslAtucPerfPrev1DayLols | read-only | current | Count of seconds in the interval when there was Loss of Link within the most recent previous 1-day period. |
| 1.3.6.1.2.1.10.94.1.1.6.1.27 | ColumnadslAtucPerfPrev1DayLprs | read-only | current | Count of seconds in the interval when there was Loss of Power within the most recent previous 1-day period. |
| 1.3.6.1.2.1.10.94.1.1.6.1.28 | ColumnadslAtucPerfPrev1DayESs | read-only | current | Count of Errored Seconds within the most recent previous 1-day period. The errored second parameter is a count of one-second intervals containing one or more c… |
| 1.3.6.1.2.1.10.94.1.1.6.1.29 | ColumnadslAtucPerfPrev1DayInits | read-only | current | Count of the line initialization attempts in the most recent previous 1-day period. Includes both successful and failed attempts. |
| 1.3.6.1.2.1.10.94.1.1.7 | TableadslAturPerfDataTable | not-accessible | current | This table provides one row for each ATUR. ADSL physical interfaces are those ifEntries where ifType is equal to adsl(94). |
| 1.3.6.1.2.1.10.94.1.1.7.1 | RowadslAturPerfDataEntry | not-accessible | current | An entry in adslAturPerfDataTable. |
| 1.3.6.1.2.1.10.94.1.1.7.1.1 | ColumnadslAturPerfLofs | read-only | current | Count of the number of Loss of Framing failures since agent reset. |
| 1.3.6.1.2.1.10.94.1.1.7.1.2 | ColumnadslAturPerfLoss | read-only | current | Count of the number of Loss of Signal failures since agent reset. |
| 1.3.6.1.2.1.10.94.1.1.7.1.3 | ColumnadslAturPerfLprs | read-only | current | Count of the number of Loss of Power failures since agent reset. |
| 1.3.6.1.2.1.10.94.1.1.7.1.4 | ColumnadslAturPerfESs | read-only | current | Count of the number of Errored Seconds since agent reset. The errored second parameter is a count of one-second intervals containing one or more crc anomalies,… |
| 1.3.6.1.2.1.10.94.1.1.7.1.5 | ColumnadslAturPerfValidIntervals | read-only | current | The number of previous 15-minute intervals in the interval table for which data was collected. Given that <n> is the maximum # of intervals supported. The valu… |
| 1.3.6.1.2.1.10.94.1.1.7.1.6 | ColumnadslAturPerfInvalidIntervals | read-only | current | The number of intervals in the range from 0 to the value of adslAturPerfValidIntervals for which no data is available. This object will typically be zero excep… |
| 1.3.6.1.2.1.10.94.1.1.7.1.7 | ColumnadslAturPerfCurr15MinTimeElapsed | read-only | current | Total elapsed seconds in this interval. |
| 1.3.6.1.2.1.10.94.1.1.7.1.8 | ColumnadslAturPerfCurr15MinLofs | read-only | current | Count of seconds in the current 15 minute interval when there was Loss of Framing. |
| 1.3.6.1.2.1.10.94.1.1.7.1.9 | ColumnadslAturPerfCurr15MinLoss | read-only | current | Count of seconds in the current 15 minute interval when there was Loss of Signal. |
| 1.3.6.1.2.1.10.94.1.1.7.1.10 | ColumnadslAturPerfCurr15MinLprs | read-only | current | Count of seconds in the current 15 minute interval when there was Loss of Power. |
| 1.3.6.1.2.1.10.94.1.1.7.1.11 | ColumnadslAturPerfCurr15MinESs | read-only | current | Count of Errored Seconds in the current 15 minute interval. The errored second parameter is a count of one-second intervals containing one or more crc anomalie… |
| 1.3.6.1.2.1.10.94.1.1.7.1.12 | ColumnadslAturPerfCurr1DayTimeElapsed | read-only | current | Number of seconds that have elapsed since the beginning of the current 1-day interval. |
| 1.3.6.1.2.1.10.94.1.1.7.1.13 | ColumnadslAturPerfCurr1DayLofs | read-only | current | Count of the number of seconds when there was Loss of Framing during the current day as measured by adslAturPerfCurr1DayTimeElapsed. |
| 1.3.6.1.2.1.10.94.1.1.7.1.14 | ColumnadslAturPerfCurr1DayLoss | read-only | current | Count of the number of seconds when there was Loss of Signal during the current day as measured by adslAturPerfCurr1DayTimeElapsed. |
| 1.3.6.1.2.1.10.94.1.1.7.1.15 | ColumnadslAturPerfCurr1DayLprs | read-only | current | Count of the number of seconds when there was Loss of Power during the current day as measured by adslAturPerfCurr1DayTimeElapsed. |
| 1.3.6.1.2.1.10.94.1.1.7.1.16 | ColumnadslAturPerfCurr1DayESs | read-only | current | Count of Errored Seconds during the current day as measured by adslAturPerfCurr1DayTimeElapsed. The errored second parameter is a count of one-second intervals… |
| 1.3.6.1.2.1.10.94.1.1.7.1.17 | ColumnadslAturPerfPrev1DayMoniSecs | read-only | current | The amount of time in the previous 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the int… |
| 1.3.6.1.2.1.10.94.1.1.7.1.18 | ColumnadslAturPerfPrev1DayLofs | read-only | current | Count of seconds in the interval when there was Loss of Framing within the most recent previous 1-day period. |
| 1.3.6.1.2.1.10.94.1.1.7.1.19 | ColumnadslAturPerfPrev1DayLoss | read-only | current | Count of seconds in the interval when there was Loss of Signal within the most recent previous 1-day period. |
| 1.3.6.1.2.1.10.94.1.1.7.1.20 | ColumnadslAturPerfPrev1DayLprs | read-only | current | Count of seconds in the interval when there was Loss of Power within the most recent previous 1-day period. |
| 1.3.6.1.2.1.10.94.1.1.7.1.21 | ColumnadslAturPerfPrev1DayESs | read-only | current | Count of Errored Seconds within the most recent previous 1-day period. The errored second parameter is a count of one-second intervals containing one or more c… |
| 1.3.6.1.2.1.10.94.1.1.8 | TableadslAtucIntervalTable | not-accessible | current | This table provides one row for each ATUC performance data collection interval. ADSL physical interfaces are those ifEntries where ifType is equal to adsl(94). |
| 1.3.6.1.2.1.10.94.1.1.8.1 | RowadslAtucIntervalEntry | not-accessible | current | An entry in the adslAtucIntervalTable. |
| 1.3.6.1.2.1.10.94.1.1.8.1.1 | ColumnadslAtucIntervalNumber | not-accessible | current | Performance Data Interval number 1 is the the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are optional. |
| 1.3.6.1.2.1.10.94.1.1.8.1.2 | ColumnadslAtucIntervalLofs | read-only | current | Count of seconds in the interval when there was Loss of Framing. |
| 1.3.6.1.2.1.10.94.1.1.8.1.3 | ColumnadslAtucIntervalLoss | read-only | current | Count of seconds in the interval when there was Loss of Signal. |
| 1.3.6.1.2.1.10.94.1.1.8.1.4 | ColumnadslAtucIntervalLols | read-only | current | Count of seconds in the interval when there was Loss of Link. |
| 1.3.6.1.2.1.10.94.1.1.8.1.5 | ColumnadslAtucIntervalLprs | read-only | current | Count of seconds in the interval when there was Loss of Power. |
| 1.3.6.1.2.1.10.94.1.1.8.1.6 | ColumnadslAtucIntervalESs | read-only | current | Count of Errored Seconds in the interval. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more … |
| 1.3.6.1.2.1.10.94.1.1.8.1.7 | ColumnadslAtucIntervalInits | read-only | current | Count of the line initialization attempts during the interval. Includes both successful and failed attempts. |
| 1.3.6.1.2.1.10.94.1.1.8.1.8 | ColumnadslAtucIntervalValidData | read-only | current | This variable indicates if the data for this interval is valid. |
| 1.3.6.1.2.1.10.94.1.1.9 | TableadslAturIntervalTable | not-accessible | current | This table provides one row for each ATUR performance data collection interval. ADSL physical interfaces are those ifEntries where ifType is equal to adsl(94). |
| 1.3.6.1.2.1.10.94.1.1.9.1 | RowadslAturIntervalEntry | not-accessible | current | An entry in the adslAturIntervalTable. |
| 1.3.6.1.2.1.10.94.1.1.9.1.1 | ColumnadslAturIntervalNumber | not-accessible | current | Performance Data Interval number 1 is the the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are optional. |
| 1.3.6.1.2.1.10.94.1.1.9.1.2 | ColumnadslAturIntervalLofs | read-only | current | Count of seconds in the interval when there was Loss of Framing. |
| 1.3.6.1.2.1.10.94.1.1.9.1.3 | ColumnadslAturIntervalLoss | read-only | current | Count of seconds in the interval when there was Loss of Signal. |
| 1.3.6.1.2.1.10.94.1.1.9.1.4 | ColumnadslAturIntervalLprs | read-only | current | Count of seconds in the interval when there was Loss of Power. |
| 1.3.6.1.2.1.10.94.1.1.9.1.5 | ColumnadslAturIntervalESs | read-only | current | Count of Errored Seconds in the interval. The errored second parameter is a count of one-second intervals containing one or more crc anomalies, or one or more … |
| 1.3.6.1.2.1.10.94.1.1.9.1.6 | ColumnadslAturIntervalValidData | read-only | current | This variable indicates if the data for this interval is valid. |
| 1.3.6.1.2.1.10.94.1.1.10 | TableadslAtucChanPerfDataTable | not-accessible | current | This table provides one row for each ATUC channel. ADSL channel interfaces are those ifEntries where ifType is equal to adslInterleave(124) or adslFast(125). |
| 1.3.6.1.2.1.10.94.1.1.10.1 | RowadslAtucChanPerfDataEntry | not-accessible | current | An entry in adslAtucChanPerfDataTable. |
| 1.3.6.1.2.1.10.94.1.1.10.1.1 | ColumnadslAtucChanReceivedBlks | read-only | current | Count of all encoded blocks received on this channel since agent reset. |
| 1.3.6.1.2.1.10.94.1.1.10.1.2 | ColumnadslAtucChanTransmittedBlks | read-only | current | Count of all encoded blocks transmitted on this channel since agent reset. |
| 1.3.6.1.2.1.10.94.1.1.10.1.3 | ColumnadslAtucChanCorrectedBlks | read-only | current | Count of all blocks received with errors that were corrected since agent reset. These blocks are passed on as good data. |
| 1.3.6.1.2.1.10.94.1.1.10.1.4 | ColumnadslAtucChanUncorrectBlks | read-only | current | Count of all blocks received with uncorrectable errors since agent reset. |
| 1.3.6.1.2.1.10.94.1.1.10.1.5 | ColumnadslAtucChanPerfValidIntervals | read-only | current | The number of previous 15-minute intervals in the interval table for which data was collected. Given that <n> is the maximum # of intervals supported. The valu… |
| 1.3.6.1.2.1.10.94.1.1.10.1.6 | ColumnadslAtucChanPerfInvalidIntervals | read-only | current | The number of intervals in the range from 0 to the value of adslAtucChanPerfValidIntervals for which no data is available. This object will typically be zero e… |
| 1.3.6.1.2.1.10.94.1.1.10.1.7 | ColumnadslAtucChanPerfCurr15MinTimeElapsed | read-only | current | Total elapsed seconds in this interval. |
| 1.3.6.1.2.1.10.94.1.1.10.1.8 | ColumnadslAtucChanPerfCurr15MinReceivedBlks | read-only | current | Count of all encoded blocks received on this channel within the current 15 minute interval. |
| 1.3.6.1.2.1.10.94.1.1.10.1.9 | ColumnadslAtucChanPerfCurr15MinTransmittedBlks | read-only | current | Count of all encoded blocks transmitted on this channel within the current 15 minute interval. |
| 1.3.6.1.2.1.10.94.1.1.10.1.10 | ColumnadslAtucChanPerfCurr15MinCorrectedBlks | read-only | current | Count of all blocks received with errors that were corrected on this channel within the current 15 minute interval. |
| 1.3.6.1.2.1.10.94.1.1.10.1.11 | ColumnadslAtucChanPerfCurr15MinUncorrectBlks | read-only | current | Count of all blocks received with uncorrectable errors on this channel within the current 15 minute interval. |
| 1.3.6.1.2.1.10.94.1.1.10.1.12 | ColumnadslAtucChanPerfCurr1DayTimeElapsed | read-only | current | Number of seconds that have elapsed since the beginning of the current 1-day interval. |
| 1.3.6.1.2.1.10.94.1.1.10.1.13 | ColumnadslAtucChanPerfCurr1DayReceivedBlks | read-only | current | Count of all encoded blocks received on this channel during the current day as measured by adslAtucChanPerfCurr1DayTimeElapsed. |
| 1.3.6.1.2.1.10.94.1.1.10.1.14 | ColumnadslAtucChanPerfCurr1DayTransmittedBlks | read-only | current | Count of all encoded blocks transmitted on this channel during the current day as measured by adslAtucChanPerfCurr1DayTimeElapsed. |
| 1.3.6.1.2.1.10.94.1.1.10.1.15 | ColumnadslAtucChanPerfCurr1DayCorrectedBlks | read-only | current | Count of all blocks received with errors that were corrected on this channel during the current day as measured by adslAtucChanPerfCurr1DayTimeElapsed. |
| 1.3.6.1.2.1.10.94.1.1.10.1.16 | ColumnadslAtucChanPerfCurr1DayUncorrectBlks | read-only | current | Count of all blocks received with uncorrectable errors on this channel during the current day as measured by adslAtucChanPerfCurr1DayTimeElapsed. |
| 1.3.6.1.2.1.10.94.1.1.10.1.17 | ColumnadslAtucChanPerfPrev1DayMoniSecs | read-only | current | The amount of time in the previous 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the int… |
| 1.3.6.1.2.1.10.94.1.1.10.1.18 | ColumnadslAtucChanPerfPrev1DayReceivedBlks | read-only | current | Count of all encoded blocks received on this channel within the most recent previous 1-day period. |
| 1.3.6.1.2.1.10.94.1.1.10.1.19 | ColumnadslAtucChanPerfPrev1DayTransmittedBlks | read-only | current | Count of all encoded blocks transmitted on this channel within the most recent previous 1-day period. |
| 1.3.6.1.2.1.10.94.1.1.10.1.20 | ColumnadslAtucChanPerfPrev1DayCorrectedBlks | read-only | current | Count of all blocks received with errors that were corrected on this channel within the most recent previous 1-day period. |
| 1.3.6.1.2.1.10.94.1.1.10.1.21 | ColumnadslAtucChanPerfPrev1DayUncorrectBlks | read-only | current | Count of all blocks received with uncorrectable errors on this channel within the most recent previous 1-day period. |
| 1.3.6.1.2.1.10.94.1.1.11 | TableadslAturChanPerfDataTable | not-accessible | current | This table provides one row for each ATUR channel. ADSL channel interfaces are those ifEntries where ifType is equal to adslInterleave(124) or adslFast(125). |
| 1.3.6.1.2.1.10.94.1.1.11.1 | RowadslAturChanPerfDataEntry | not-accessible | current | An entry in adslAturChanPerfDataTable. |
| 1.3.6.1.2.1.10.94.1.1.11.1.1 | ColumnadslAturChanReceivedBlks | read-only | current | Count of all encoded blocks received on this channel since agent reset. |
| 1.3.6.1.2.1.10.94.1.1.11.1.2 | ColumnadslAturChanTransmittedBlks | read-only | current | Count of all encoded blocks transmitted on this channel since agent reset. |
| 1.3.6.1.2.1.10.94.1.1.11.1.3 | ColumnadslAturChanCorrectedBlks | read-only | current | Count of all blocks received with errors that were corrected since agent reset. These blocks are passed on as good data. |
| 1.3.6.1.2.1.10.94.1.1.11.1.4 | ColumnadslAturChanUncorrectBlks | read-only | current | Count of all blocks received with uncorrectable errors since agent reset. |
| 1.3.6.1.2.1.10.94.1.1.11.1.5 | ColumnadslAturChanPerfValidIntervals | read-only | current | The number of previous 15-minute intervals in the interval table for which data was collected. Given that <n> is the maximum # of intervals supported. The valu… |
| 1.3.6.1.2.1.10.94.1.1.11.1.6 | ColumnadslAturChanPerfInvalidIntervals | read-only | current | The number of intervals in the range from 0 to the value of adslAturChanPerfValidIntervals for which no data is available. This object will typically be zero e… |
| 1.3.6.1.2.1.10.94.1.1.11.1.7 | ColumnadslAturChanPerfCurr15MinTimeElapsed | read-only | current | Total elapsed seconds in this interval. A full interval is 900 seconds. |
| 1.3.6.1.2.1.10.94.1.1.11.1.8 | ColumnadslAturChanPerfCurr15MinReceivedBlks | read-only | current | Count of all encoded blocks received on this channel within the current 15 minute interval. |
| 1.3.6.1.2.1.10.94.1.1.11.1.9 | ColumnadslAturChanPerfCurr15MinTransmittedBlks | read-only | current | Count of all encoded blocks transmitted on this channel within the current 15 minute interval. |
| 1.3.6.1.2.1.10.94.1.1.11.1.10 | ColumnadslAturChanPerfCurr15MinCorrectedBlks | read-only | current | Count of all blocks received with errors that were corrected on this channel within the current 15 minute interval. |
| 1.3.6.1.2.1.10.94.1.1.11.1.11 | ColumnadslAturChanPerfCurr15MinUncorrectBlks | read-only | current | Count of all blocks received with uncorrectable errors on this channel within the current 15 minute interval. |
| 1.3.6.1.2.1.10.94.1.1.11.1.12 | ColumnadslAturChanPerfCurr1DayTimeElapsed | read-only | current | Number of seconds that have elapsed since the beginning of the current 1-day interval. |
| 1.3.6.1.2.1.10.94.1.1.11.1.13 | ColumnadslAturChanPerfCurr1DayReceivedBlks | read-only | current | Count of all encoded blocks received on this channel during the current day as measured by adslAturChanPerfCurr1DayTimeElapsed. |
| 1.3.6.1.2.1.10.94.1.1.11.1.14 | ColumnadslAturChanPerfCurr1DayTransmittedBlks | read-only | current | Count of all encoded blocks transmitted on this channel during the current day as measured by adslAturChanPerfCurr1DayTimeElapsed. |
| 1.3.6.1.2.1.10.94.1.1.11.1.15 | ColumnadslAturChanPerfCurr1DayCorrectedBlks | read-only | current | Count of all blocks received with errors that were corrected on this channel during the current day as measured by adslAturChanPerfCurr1DayTimeElapsed. |
| 1.3.6.1.2.1.10.94.1.1.11.1.16 | ColumnadslAturChanPerfCurr1DayUncorrectBlks | read-only | current | Count of all blocks received with uncorrectable errors on this channel during the current day as measured by adslAturChanPerfCurr1DayTimeElapsed. |
| 1.3.6.1.2.1.10.94.1.1.11.1.17 | ColumnadslAturChanPerfPrev1DayMoniSecs | read-only | current | The amount of time in the previous 1-day interval over which the performance monitoring information is actually counted. This value will be the same as the int… |
| 1.3.6.1.2.1.10.94.1.1.11.1.18 | ColumnadslAturChanPerfPrev1DayReceivedBlks | read-only | current | Count of all encoded blocks received on this channel within the most recent previous 1-day period. |
| 1.3.6.1.2.1.10.94.1.1.11.1.19 | ColumnadslAturChanPerfPrev1DayTransmittedBlks | read-only | current | Count of all encoded blocks transmitted on this channel within the most recent previous 1-day period. |
| 1.3.6.1.2.1.10.94.1.1.11.1.20 | ColumnadslAturChanPerfPrev1DayCorrectedBlks | read-only | current | Count of all blocks received with errors that were corrected on this channel within the most recent previous 1-day period. |
| 1.3.6.1.2.1.10.94.1.1.11.1.21 | ColumnadslAturChanPerfPrev1DayUncorrectBlks | read-only | current | Count of all blocks received with uncorrectable errors on this channel within the most recent previous 1-day period. |
| 1.3.6.1.2.1.10.94.1.1.12 | TableadslAtucChanIntervalTable | not-accessible | current | This table provides one row for each ATUC channel's performance data collection interval. ADSL channel interfaces are those ifEntries where ifType is equal to … |
| 1.3.6.1.2.1.10.94.1.1.12.1 | RowadslAtucChanIntervalEntry | not-accessible | current | An entry in the adslAtucIntervalTable. |
| 1.3.6.1.2.1.10.94.1.1.12.1.1 | ColumnadslAtucChanIntervalNumber | not-accessible | current | Performance Data Interval number 1 is the the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are optional. |
| 1.3.6.1.2.1.10.94.1.1.12.1.2 | ColumnadslAtucChanIntervalReceivedBlks | read-only | current | Count of all encoded blocks received on this channel during this interval. |
| 1.3.6.1.2.1.10.94.1.1.12.1.3 | ColumnadslAtucChanIntervalTransmittedBlks | read-only | current | Count of all encoded blocks transmitted on this channel during this interval. |
| 1.3.6.1.2.1.10.94.1.1.12.1.4 | ColumnadslAtucChanIntervalCorrectedBlks | read-only | current | Count of all blocks received with errors that were corrected on this channel during this interval. |
| 1.3.6.1.2.1.10.94.1.1.12.1.5 | ColumnadslAtucChanIntervalUncorrectBlks | read-only | current | Count of all blocks received with uncorrectable errors on this channel during this interval. |
| 1.3.6.1.2.1.10.94.1.1.12.1.6 | ColumnadslAtucChanIntervalValidData | read-only | current | This variable indicates if the data for this interval is valid. |
| 1.3.6.1.2.1.10.94.1.1.13 | TableadslAturChanIntervalTable | not-accessible | current | This table provides one row for each ATUR channel's performance data collection interval. ADSL channel interfaces are those ifEntries where ifType is equal to … |
| 1.3.6.1.2.1.10.94.1.1.13.1 | RowadslAturChanIntervalEntry | not-accessible | current | An entry in the adslAturIntervalTable. |
| 1.3.6.1.2.1.10.94.1.1.13.1.1 | ColumnadslAturChanIntervalNumber | not-accessible | current | Performance Data Interval number 1 is the the most recent previous interval; interval 96 is 24 hours ago. Intervals 2..96 are optional. |
| 1.3.6.1.2.1.10.94.1.1.13.1.2 | ColumnadslAturChanIntervalReceivedBlks | read-only | current | Count of all encoded blocks received on this channel during this interval. |
| 1.3.6.1.2.1.10.94.1.1.13.1.3 | ColumnadslAturChanIntervalTransmittedBlks | read-only | current | Count of all encoded blocks transmitted on this channel during this interval. |
| 1.3.6.1.2.1.10.94.1.1.13.1.4 | ColumnadslAturChanIntervalCorrectedBlks | read-only | current | Count of all blocks received with errors that were corrected on this channel during this interval. |
| 1.3.6.1.2.1.10.94.1.1.13.1.5 | ColumnadslAturChanIntervalUncorrectBlks | read-only | current | Count of all blocks received with uncorrectable errors on this channel during this interval. |
| 1.3.6.1.2.1.10.94.1.1.13.1.6 | ColumnadslAturChanIntervalValidData | read-only | current | This variable indicates if the data for this interval is valid. |
| 1.3.6.1.2.1.10.94.1.1.14 | TableadslLineConfProfileTable | not-accessible | current | This table contains information on the ADSL line configuration. One entry in this table reflects a profile defined by a manager which can be used to configure … |
| 1.3.6.1.2.1.10.94.1.1.14.1 | RowadslLineConfProfileEntry | not-accessible | current | Each entry consists of a list of parameters that represents the configuration of an ADSL modem. When `dynamic' profiles are implemented, a default profile will… |
| 1.3.6.1.2.1.10.94.1.1.14.1.1 | ColumnadslLineConfProfileName | not-accessible | current | This object is used by the line configuration table in order to identify a row of this table. When `dynamic' profiles are implemented, the profile name is user… |
| 1.3.6.1.2.1.10.94.1.1.14.1.2 | ColumnadslAtucConfRateMode | read-create | current | Defines what form of transmit rate adaptation is configured on this modem. See ADSL Forum TR-005 [3] for more information. |
| 1.3.6.1.2.1.10.94.1.1.14.1.3 | ColumnadslAtucConfRateChanRatio | read-create | current | Configured allocation ratio of excess transmit bandwidth between fast and interleaved channels. Only applies when two channel mode and RADSL are supported. Dis… |
| 1.3.6.1.2.1.10.94.1.1.14.1.4 | ColumnadslAtucConfTargetSnrMgn | read-create | current | Configured Target Signal/Noise Margin. This is the Noise Margin the modem must achieve with a BER of 10-7 or better to successfully complete initialization. |
| 1.3.6.1.2.1.10.94.1.1.14.1.5 | ColumnadslAtucConfMaxSnrMgn | read-create | current | Configured Maximum acceptable Signal/Noise Margin. If the Noise Margin is above this the modem should attempt to reduce its power output to optimize its operat… |
| 1.3.6.1.2.1.10.94.1.1.14.1.6 | ColumnadslAtucConfMinSnrMgn | read-create | current | Configured Minimum acceptable Signal/Noise Margin. If the noise margin falls below this level, the modem should attempt to increase its power output. If that i… |
| 1.3.6.1.2.1.10.94.1.1.14.1.7 | ColumnadslAtucConfDownshiftSnrMgn | read-create | current | Configured Signal/Noise Margin for rate downshift. If the noise margin falls below this level, the modem should attempt to decrease its transmit rate. In the c… |
| 1.3.6.1.2.1.10.94.1.1.14.1.8 | ColumnadslAtucConfUpshiftSnrMgn | read-create | current | Configured Signal/Noise Margin for rate upshift. If the noise margin rises above this level, the modem should attempt to increase its transmit rate. In the cas… |
| 1.3.6.1.2.1.10.94.1.1.14.1.9 | ColumnadslAtucConfMinUpshiftTime | read-create | current | Minimum time that the current margin is above UpshiftSnrMgn before an upshift occurs. In the case that RADSL is not present, the value will be `0'. |
| 1.3.6.1.2.1.10.94.1.1.14.1.10 | ColumnadslAtucConfMinDownshiftTime | read-create | current | Minimum time that the current margin is below DownshiftSnrMgn before a downshift occurs. In the case that RADSL mode is not present, the value will be `0'. |
| 1.3.6.1.2.1.10.94.1.1.14.1.11 | ColumnadslAtucChanConfFastMinTxRate | read-create | current | Configured Minimum Transmit rate for `Fast' channels, in bps. See adslAtucConfRateChanRatio for information regarding RADSL mode and ATUR transmit rate for ATU… |
| 1.3.6.1.2.1.10.94.1.1.14.1.12 | ColumnadslAtucChanConfInterleaveMinTxRate | read-create | current | Configured Minimum Transmit rate for `Interleave' channels, in bps. See adslAtucConfRateChanRatio for information regarding RADSL mode and see ATUR transmit ra… |
| 1.3.6.1.2.1.10.94.1.1.14.1.13 | ColumnadslAtucChanConfFastMaxTxRate | read-create | current | Configured Maximum Transmit rate for `Fast' channels, in bps. See adslAtucConfRateChanRatio for information regarding RADSL mode and see ATUR transmit rate for… |
| 1.3.6.1.2.1.10.94.1.1.14.1.14 | ColumnadslAtucChanConfInterleaveMaxTxRate | read-create | current | Configured Maximum Transmit rate for `Interleave' channels, in bps. See adslAtucConfRateChanRatio for information regarding RADSL mode and ATUR transmit rate f… |
| 1.3.6.1.2.1.10.94.1.1.14.1.15 | ColumnadslAtucChanConfMaxInterleaveDelay | read-create | current | Configured maximum Interleave Delay for this channel. Interleave delay applies only to the interleave channel and defines the mapping (relative spacing) betwee… |
| 1.3.6.1.2.1.10.94.1.1.14.1.16 | ColumnadslAturConfRateMode | read-create | current | Defines what form of transmit rate adaptation is configured on this modem. See ADSL Forum TR-005 [3] for more information. |
| 1.3.6.1.2.1.10.94.1.1.14.1.17 | ColumnadslAturConfRateChanRatio | read-create | current | Configured allocation ratio of excess transmit bandwidth between fast and interleaved channels. Only applies when two channel mode and RADSL are supported. Dis… |
| 1.3.6.1.2.1.10.94.1.1.14.1.18 | ColumnadslAturConfTargetSnrMgn | read-create | current | Configured Target Signal/Noise Margin. This is the Noise Margin the modem must achieve with a BER of 10-7 or better to successfully complete initialization. |
| 1.3.6.1.2.1.10.94.1.1.14.1.19 | ColumnadslAturConfMaxSnrMgn | read-create | current | Configured Maximum acceptable Signal/Noise Margin. If the Noise Margin is above this the modem should attempt to reduce its power output to optimize its operat… |
| 1.3.6.1.2.1.10.94.1.1.14.1.20 | ColumnadslAturConfMinSnrMgn | read-create | current | Configured Minimum acceptable Signal/Noise Margin. If the noise margin falls below this level, the modem should attempt to increase its power output. If that i… |
| 1.3.6.1.2.1.10.94.1.1.14.1.21 | ColumnadslAturConfDownshiftSnrMgn | read-create | current | Configured Signal/Noise Margin for rate downshift. If the noise margin falls below this level, the modem should attempt to decrease its transmit rate. In the c… |
| 1.3.6.1.2.1.10.94.1.1.14.1.22 | ColumnadslAturConfUpshiftSnrMgn | read-create | current | Configured Signal/Noise Margin for rate upshift. If the noise margin rises above this level, the modem should attempt to increase its transmit rate. In the cas… |
| 1.3.6.1.2.1.10.94.1.1.14.1.23 | ColumnadslAturConfMinUpshiftTime | read-create | current | Minimum time that the current margin is above UpshiftSnrMgn before an upshift occurs. In the case that RADSL is not present, the value will be `0'. |
| 1.3.6.1.2.1.10.94.1.1.14.1.24 | ColumnadslAturConfMinDownshiftTime | read-create | current | Minimum time that the current margin is below DownshiftSnrMgn before a downshift occurs. In the case that RADSL mode is not present, the value will be `0'. |
| 1.3.6.1.2.1.10.94.1.1.14.1.25 | ColumnadslAturChanConfFastMinTxRate | read-create | current | Configured Minimum Transmit rate for `Fast' channels, in bps. See adslAturConfRateChanRatio for information regarding RADSL mode and ATUC transmit rate for ATU… |
| 1.3.6.1.2.1.10.94.1.1.14.1.26 | ColumnadslAturChanConfInterleaveMinTxRate | read-create | current | Configured Minimum Transmit rate for `Interleave' channels, in bps. See adslAturConfRateChanRatio for information regarding RADSL mode and ATUC transmit rate f… |
| 1.3.6.1.2.1.10.94.1.1.14.1.27 | ColumnadslAturChanConfFastMaxTxRate | read-create | current | Configured Maximum Transmit rate for `Fast' channels, in bps. See adslAturConfRateChanRatio for information regarding RADSL mode and ATUC transmit rate for ATU… |
| 1.3.6.1.2.1.10.94.1.1.14.1.28 | ColumnadslAturChanConfInterleaveMaxTxRate | read-create | current | Configured Maximum Transmit rate for `Interleave' channels, in bps. See adslAturConfRateChanRatio for information regarding RADSL mode and see ATUC transmit ra… |
| 1.3.6.1.2.1.10.94.1.1.14.1.29 | ColumnadslAturChanConfMaxInterleaveDelay | read-create | current | Configured maximum Interleave Delay for this channel. Interleave delay applies only to the interleave channel and defines the mapping (relative spacing) betwee… |
| 1.3.6.1.2.1.10.94.1.1.14.1.30 | ColumnadslLineConfProfileRowStatus | read-create | current | This object is used to create a new row or modify or delete an existing row in this table. A profile activated by setting this object to `active'. When `active… |
| 1.3.6.1.2.1.10.94.1.1.15 | TableadslLineAlarmConfProfileTable | not-accessible | current | This table contains information on the ADSL line configuration. One entry in this table reflects a profile defined by a manager which can be used to configure … |
| 1.3.6.1.2.1.10.94.1.1.15.1 | RowadslLineAlarmConfProfileEntry | not-accessible | current | Each entry consists of a list of parameters that represents the configuration of an ADSL modem. When `dynamic' profiles are implemented, a default profile will… |
| 1.3.6.1.2.1.10.94.1.1.15.1.1 | ColumnadslLineAlarmConfProfileName | not-accessible | current | This object is used by the line alarm configuration table in order to identify a row of this table. When `dynamic' profiles are implemented, the profile name i… |
| 1.3.6.1.2.1.10.94.1.1.15.1.2 | ColumnadslAtucThresh15MinLofs | read-create | current | The number of Loss of Frame Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agen… |
| 1.3.6.1.2.1.10.94.1.1.15.1.3 | ColumnadslAtucThresh15MinLoss | read-create | current | The number of Loss of Signal Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP age… |
| 1.3.6.1.2.1.10.94.1.1.15.1.4 | ColumnadslAtucThresh15MinLols | read-create | current | The number of Loss of Link Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent… |
| 1.3.6.1.2.1.10.94.1.1.15.1.5 | ColumnadslAtucThresh15MinLprs | read-create | current | The number of Loss of Power Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agen… |
| 1.3.6.1.2.1.10.94.1.1.15.1.6 | ColumnadslAtucThresh15MinESs | read-create | current | The number of Errored Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to s… |
| 1.3.6.1.2.1.10.94.1.1.15.1.7 | ColumnadslAtucThreshFastRateUp | read-create | current | Applies to `Fast' channels only. Configured change in rate causing an adslAtucRateChangeTrap. A trap is produced when: ChanCurrTxRate >= ChanPrevTxRate plus th… |
| 1.3.6.1.2.1.10.94.1.1.15.1.8 | ColumnadslAtucThreshInterleaveRateUp | read-create | current | Applies to `Interleave' channels only. Configured change in rate causing an adslAtucRateChangeTrap. A trap is produced when: ChanCurrTxRate >= ChanPrevTxRate p… |
| 1.3.6.1.2.1.10.94.1.1.15.1.9 | ColumnadslAtucThreshFastRateDown | read-create | current | Applies to `Fast' channels only. Configured change in rate causing an adslAtucRateChangeTrap. A trap is produced when: ChanCurrTxRate <= ChanPrevTxRate minus t… |
| 1.3.6.1.2.1.10.94.1.1.15.1.10 | ColumnadslAtucThreshInterleaveRateDown | read-create | current | Applies to `Interleave' channels only. Configured change in rate causing an adslAtucRateChangeTrap. A trap is produced when: ChanCurrTxRate <= ChanPrevTxRate m… |
| 1.3.6.1.2.1.10.94.1.1.15.1.11 | ColumnadslAtucInitFailureTrapEnable | read-create | current | Enables and disables the InitFailureTrap. This object is defaulted disable(2). |
| 1.3.6.1.2.1.10.94.1.1.15.1.12 | ColumnadslAturThresh15MinLofs | read-create | current | The number of Loss of Frame Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agen… |
| 1.3.6.1.2.1.10.94.1.1.15.1.13 | ColumnadslAturThresh15MinLoss | read-create | current | The number of Loss of Signal Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP age… |
| 1.3.6.1.2.1.10.94.1.1.15.1.14 | ColumnadslAturThresh15MinLprs | read-create | current | The number of Loss of Power Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agen… |
| 1.3.6.1.2.1.10.94.1.1.15.1.15 | ColumnadslAturThresh15MinESs | read-create | current | The number of Errored Seconds encountered by an ADSL interface within any given 15 minutes performance data collection period, which causes the SNMP agent to s… |
| 1.3.6.1.2.1.10.94.1.1.15.1.16 | ColumnadslAturThreshFastRateUp | read-create | current | Applies to `Fast' channels only. Configured change in rate causing an adslAturRateChangeTrap. A trap is produced when: ChanCurrTxRate >= ChanPrevTxRate plus th… |
| 1.3.6.1.2.1.10.94.1.1.15.1.17 | ColumnadslAturThreshInterleaveRateUp | read-create | current | Applies to `Interleave' channels only. configured change in rate causing an adslAturRateChangeTrap. A trap is produced when: ChanCurrTxRate >= ChanPrevTxRate p… |
| 1.3.6.1.2.1.10.94.1.1.15.1.18 | ColumnadslAturThreshFastRateDown | read-create | current | Applies to `Fast' channels only. Configured change in rate causing an adslAturRateChangeTrap. A trap is produced when: ChanCurrTxRate <= ChanPrevTxRate minus t… |
| 1.3.6.1.2.1.10.94.1.1.15.1.19 | ColumnadslAturThreshInterleaveRateDown | read-create | current | Applies to `Interleave' channels only. Configured change in rate causing an adslAturRateChangeTrap. A trap is produced when: ChanCurrTxRate <= ChanPrevTxRate m… |
| 1.3.6.1.2.1.10.94.1.1.15.1.20 | ColumnadslLineAlarmConfProfileRowStatus | read-create | current | This object is used to create a new row or modify or delete an existing row in this table. A profile activated by setting this object to `active'. When `active… |
| 1.3.6.1.2.1.10.94.1.1.16 | NodeadslLCSMib | |||
| 1.3.6.1.2.1.10.94.1.2 | NodeadslTraps | |||
| 1.3.6.1.2.1.10.94.1.2.1 | NodeadslAtucTraps | |||
| 1.3.6.1.2.1.10.94.1.2.1.0.1 | NotificationadslAtucPerfLofsThreshTrap | current | Loss of Framing 15-minute interval threshold reached. | |
| 1.3.6.1.2.1.10.94.1.2.1.0.2 | NotificationadslAtucPerfLossThreshTrap | current | Loss of Signal 15-minute interval threshold reached. | |
| 1.3.6.1.2.1.10.94.1.2.1.0.3 | NotificationadslAtucPerfLprsThreshTrap | current | Loss of Power 15-minute interval threshold reached. | |
| 1.3.6.1.2.1.10.94.1.2.1.0.4 | NotificationadslAtucPerfESsThreshTrap | current | Errored Second 15-minute interval threshold reached. | |
| 1.3.6.1.2.1.10.94.1.2.1.0.5 | NotificationadslAtucRateChangeTrap | current | The ATUCs transmit rate has changed (RADSL mode only) | |
| 1.3.6.1.2.1.10.94.1.2.1.0.6 | NotificationadslAtucPerfLolsThreshTrap | current | Loss of Link 15-minute interval threshold reached. | |
| 1.3.6.1.2.1.10.94.1.2.1.0.7 | NotificationadslAtucInitFailureTrap | current | ATUC initialization failed. See adslAtucCurrStatus for potential reasons. | |
| 1.3.6.1.2.1.10.94.1.2.2 | NodeadslAturTraps | |||
| 1.3.6.1.2.1.10.94.1.2.2.0.1 | NotificationadslAturPerfLofsThreshTrap | current | Loss of Framing 15-minute interval threshold reached. | |
| 1.3.6.1.2.1.10.94.1.2.2.0.2 | NotificationadslAturPerfLossThreshTrap | current | Loss of Signal 15-minute interval threshold reached. | |
| 1.3.6.1.2.1.10.94.1.2.2.0.3 | NotificationadslAturPerfLprsThreshTrap | current | Loss of Power 15-minute interval threshold reached. | |
| 1.3.6.1.2.1.10.94.1.2.2.0.4 | NotificationadslAturPerfESsThreshTrap | current | Errored Second 15-minute interval threshold reached. | |
| 1.3.6.1.2.1.10.94.1.2.2.0.5 | NotificationadslAturRateChangeTrap | current | The ATURs transmit rate has changed (RADSL mode only) | |
| 1.3.6.1.2.1.10.94.1.3 | NodeadslConformance | |||
| 1.3.6.1.2.1.10.94.1.3.1 | NodeadslGroups | |||
| 1.3.6.1.2.1.10.94.1.3.1.1 | GroupadslLineGroup | current | A collection of objects providing configuration information about an ADSL Line. | |
| 1.3.6.1.2.1.10.94.1.3.1.2 | GroupadslPhysicalGroup | current | A collection of objects providing physical configuration information of the ADSL Line. | |
| 1.3.6.1.2.1.10.94.1.3.1.3 | GroupadslChannelGroup | current | A collection of objects providing configuration information about an ADSL channel. | |
| 1.3.6.1.2.1.10.94.1.3.1.4 | GroupadslAtucPhysPerfRawCounterGroup | current | A collection of objects providing raw performance counts on an ADSL Line (ATU-C end). | |
| 1.3.6.1.2.1.10.94.1.3.1.5 | GroupadslAtucPhysPerfIntervalGroup | current | A collection of objects providing current 15-minute, 1-day; and previous 1-day performance counts on ADSL Line (ATU-C end) . | |
| 1.3.6.1.2.1.10.94.1.3.1.6 | GroupadslAturPhysPerfRawCounterGroup | current | A collection of objects providing raw performance counts on an ADSL Line (ATU-R end). | |
| 1.3.6.1.2.1.10.94.1.3.1.7 | GroupadslAturPhysPerfIntervalGroup | current | A collection of objects providing current 15-minute, 1-day; and previous 1-day performance counts on ADSL Line (ATU-R end). | |
| 1.3.6.1.2.1.10.94.1.3.1.8 | GroupadslAtucChanPerformanceGroup | current | A collection of objects providing channel block performance information on an ADSL channel (ATU-C end). | |
| 1.3.6.1.2.1.10.94.1.3.1.9 | GroupadslAturChanPerformanceGroup | current | A collection of objects providing channel block performance information on an ADSL channel (ATU-C end). | |
| 1.3.6.1.2.1.10.94.1.3.1.10 | GroupadslLineConfProfileGroup | current | A collection of objects providing provisioning information about an ADSL Line. | |
| 1.3.6.1.2.1.10.94.1.3.1.11 | GroupadslLineAlarmConfProfileGroup | current | A collection of objects providing alarm provisioning information about an ADSL Line. | |
| 1.3.6.1.2.1.10.94.1.3.1.12 | GroupadslLineConfProfileControlGroup | current | A collection of objects providing profile control for the ADSL system. | |
| 1.3.6.1.2.1.10.94.1.3.1.13 | GroupadslNotificationsGroup | current | The collection of adsl notifications. | |
| 1.3.6.1.2.1.10.94.1.3.1.14 | GroupadslAturLineGroup | current | A collection of objects providing configuration information about an ADSL Line on the ATU-R side. | |
| 1.3.6.1.2.1.10.94.1.3.1.15 | GroupadslAturPhysicalGroup | current | A collection of objects providing physical configuration information of the ADSL Line on the ATU-R side. | |
| 1.3.6.1.2.1.10.94.1.3.1.16 | GroupadslAturChannelGroup | current | A collection of objects providing configuration information about an ADSL channel on the ATU-R side. | |
| 1.3.6.1.2.1.10.94.1.3.1.17 | GroupadslAturAtucPhysPerfRawCounterGroup | current | A collection of objects providing raw performance counts on an ADSL Line (ATU-C end) provided by the ATU-R agent. | |
| 1.3.6.1.2.1.10.94.1.3.1.18 | GroupadslAturAtucPhysPerfIntervalGroup | current | A collection of objects providing current 15-minute, 1-day; and previous 1-day performance counts on ADSL Line (ATU-C end) provided by the ATU-R agent. | |
| 1.3.6.1.2.1.10.94.1.3.1.19 | GroupadslAturAturPhysPerfRawCounterGroup | current | A collection of objects providing raw performance counts on an ADSL Line (ATU-R end) provided by the ATU-R agent. | |
| 1.3.6.1.2.1.10.94.1.3.1.20 | GroupadslAturAturPhysPerfIntervalGroup | current | A collection of objects providing current 15-minute, 1-day; and previous 1-day performance counts on ADSL Line (ATU-R end) provided by the ATU-R agent. | |
| 1.3.6.1.2.1.10.94.1.3.1.21 | GroupadslAturAtucChanPerformanceGroup | current | A collection of objects providing channel block performance information on an ADSL channel (ATU-C end) provided by the ATU-R agent. | |
| 1.3.6.1.2.1.10.94.1.3.1.22 | GroupadslAturAturChanPerformanceGroup | current | A collection of objects providing channel block performance information on an ADSL channel (ATU-R end) provided by the ATU-R agent. | |
| 1.3.6.1.2.1.10.94.1.3.1.23 | GroupadslAturLineAlarmConfProfileGroup | current | A collection of objects providing alarm provisioning information about an ADSL Line provided by the ATU-R agent. | |
| 1.3.6.1.2.1.10.94.1.3.1.24 | GroupadslAturLineConfProfileControlGroup | current | A collection of objects providing profile control for the ADSL system by the ATU-R agent. | |
| 1.3.6.1.2.1.10.94.1.3.1.25 | GroupadslAturNotificationsGroup | current | The collection of ADSL notifications implemented by the ATU-R agent. | |
| 1.3.6.1.2.1.10.94.1.3.2 | NodeadslCompliances | |||
| 1.3.6.1.2.1.10.94.1.3.2.1 | ComplianceadslLineMibAtucCompliance | read-only | current | The compliance statement for SNMP entities which manage ADSL ATU-C interfaces. |
| 1.3.6.1.2.1.10.94.1.3.2.2 | ComplianceadslLineMibAturCompliance | read-only | current | The compliance statement for SNMP entities which manage ADSL ATU-R interfaces. |