ADTRAN-DYNAMIC-COUNTERS-MIB
54 objects
Adtran Dynamic Counter MIB
Imported Objects
| ADTRAN-GENSLOT-MIB | adGenSlotInfoIndex |
| ADTRAN-MIB | adIdentity |
| ADTRAN-SHARED-CND-SYSTEM-MIB MISSING | adGenDynamicCounter adGenDynamicCounterID |
| IF-MIB | InterfaceIndexOrZero |
| SNMPv2-SMI | Counter64 Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | DisplayString PhysAddress RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.664.5.70.53.1 | NodeadGenDynamicCounterTables | |||
| 1.3.6.1.4.1.664.5.70.53.1.1 | TableadGenDCSlotTable | not-accessible | current | Provides information about dynamic counter slot support. |
| 1.3.6.1.4.1.664.5.70.53.1.1.1 | RowadGenDCSlotEntry | not-accessible | current | Provides information about dynamic counter slot support. |
| 1.3.6.1.4.1.664.5.70.53.1.1.1.1 | ColumnadGenDCSlotSupport | read-only | current | Identifies the dynamic counter matching types supported by the slot. Each bit will be set if the matching type can be used in adGenDCProfileTable. The values a… |
| 1.3.6.1.4.1.664.5.70.53.1.1.1.2 | ColumnadGenDCSlotMaxDCProfileIndex | read-only | current | The maximum index value that can be used for the dynamic counter profile index on this slot. |
| 1.3.6.1.4.1.664.5.70.53.1.1.1.3 | ColumnadGenDCSlotNextDCProfileIndex | read-only | current | Identifies the next free index for a dynamic counter profile. Reports 0 if there is no available entry. |
| 1.3.6.1.4.1.664.5.70.53.1.1.1.4 | ColumnadGenDCSlotMaxDCIndex | read-only | current | The maximum index value that can be used for the dynamic counter index on this slot. |
| 1.3.6.1.4.1.664.5.70.53.1.1.1.5 | ColumnadGenDCSlotNextDCIndex | read-only | current | Identifies the next free index for a dynamic counter. Reports 0 if there is no available entry. |
| 1.3.6.1.4.1.664.5.70.53.1.1.1.6 | ColumnadGenDCSlotClearAllDC | read-write | current | This will always report idle. To clear all dynamic counter counts on the slot, write clearAll to this element. |
| 1.3.6.1.4.1.664.5.70.53.1.1.1.7 | ColumnadGenDCSlotLastError | read-only | current | The details of the last error seen at the slot level, based on queries to this entry. The main use may be to report the error when there are no more entries av… |
| 1.3.6.1.4.1.664.5.70.53.1.2 | TableadGenDCProfileTable | not-accessible | current | Provides information about dynamic counter matching criteria. |
| 1.3.6.1.4.1.664.5.70.53.1.2.1 | RowadGenDCProfileEntry | not-accessible | current | Provides information about dynamic counter matching criteria. |
| 1.3.6.1.4.1.664.5.70.53.1.2.1.1 | ColumnadGenDCProfileIndex | not-accessible | current | Identifies the index of the dynamic counter profile. The index will be from 1 to N, where N is the maximum number of dynamic counters supported by the module. |
| 1.3.6.1.4.1.664.5.70.53.1.2.1.2 | ColumnadGenDCProfileRowStatus | read-create | current | This object is used to create a new counter profile and delete an existing counter profile. To create, write createAndWait(5) or createAndGo(4) to this element… |
| 1.3.6.1.4.1.664.5.70.53.1.2.1.3 | ColumnadGenDCProfileColorType | read-create | current | Specify the color of the traffic to be matched in this profile. The default is noMatching, which means the color will not be used in this profile. |
| 1.3.6.1.4.1.664.5.70.53.1.2.1.4 | ColumnadGenDCProfilePBitType | read-create | current | Specify whether the P-Bit is being matched in this profile. The default is noMatching, which means the P-Bit will not be used in this profile. If pBit is set, … |
| 1.3.6.1.4.1.664.5.70.53.1.2.1.5 | ColumnadGenDCProfilePBit | read-create | current | Specify a P-Bit value being matched in this profile when adGenDCProfilePBitType is set to pBit. This is unused if adGenDCProfilePBitType is set to anything els… |
| 1.3.6.1.4.1.664.5.70.53.1.2.1.6 | ColumnadGenDCProfileSTagType | read-create | current | Specify whether the S-Tag is being matched in this profile. The default is noMatching, which means the S-Tag will not be used in this profile. If sTag is set, … |
| 1.3.6.1.4.1.664.5.70.53.1.2.1.7 | ColumnadGenDCProfileSTag | read-create | current | Specify an S-Tag value being matched in this profile when adGenDCProfileSTagType is set to sTag. This is unused if adGenDCProfileSTagType is set to anything el… |
| 1.3.6.1.4.1.664.5.70.53.1.2.1.8 | ColumnadGenDCProfileDestMacType | read-create | current | Specify whether the destination MAC is being matched in this profile. The default is noMatching, which means the MAC will not be used in this profile. If mac i… |
| 1.3.6.1.4.1.664.5.70.53.1.2.1.9 | ColumnadGenDCProfileDestMacAddress | read-create | current | Specify a destination MAC address being matched in this profile when adGenDCProfileDestMacType is set to mac. This is unused if adGenDCProfileDestMacType is se… |
| 1.3.6.1.4.1.664.5.70.53.1.2.1.10 | ColumnadGenDCProfileDestIpType | read-create | current | Specify whether the destination IP is being matched in this profile. The default is noMatching, which means the IP will not be used in this profile. If ip is s… |
| 1.3.6.1.4.1.664.5.70.53.1.2.1.11 | ColumnadGenDCProfileDestIpAddress | read-create | current | Specify a destination IP address being matched in this profile when adGenDCProfileDestIpType is set to ip. This is unused if adGenDCProfileDestIpType is set to… |
| 1.3.6.1.4.1.664.5.70.53.1.2.1.12 | ColumnadGenDCProfileSrcMacType | read-create | current | Specify whether the source MAC is being matched in this profile. The default is noMatching, which means the MAC will not be used in this profile. If mac is set… |
| 1.3.6.1.4.1.664.5.70.53.1.2.1.13 | ColumnadGenDCProfileSrcMacAddress | read-create | current | Specify a source MAC address being matched in this profile when adGenDCProfileSrcMacType is set to mac. This is unused if adGenDCProfileSrcMacType is set to an… |
| 1.3.6.1.4.1.664.5.70.53.1.2.1.14 | ColumnadGenDCProfileSrcIpType | read-create | current | Specify whether the source IP is being matched in this profile. The default is noMatching, which means the IP will not be used in this profile. If ip is set, t… |
| 1.3.6.1.4.1.664.5.70.53.1.2.1.15 | ColumnadGenDCProfileSrcIpAddress | read-create | current | Specify a source IP address being matched in this profile when adGenDCProfileSrcIpType is set to ip. This is unused if adGenDCProfileSrcIpType is set to anythi… |
| 1.3.6.1.4.1.664.5.70.53.1.2.1.16 | ColumnadGenDCProfileLastError | read-only | current | The details of the last error seen for a profile, based on queries to this entry. |
| 1.3.6.1.4.1.664.5.70.53.1.2.1.17 | ColumnadGenDCProfileEgressQueueType | read-create | current | Specify whether the Egress queue is being matched in this profile. If egressQueue is set, then the matching egress Queue value is specified in adGenDCProfileEg… |
| 1.3.6.1.4.1.664.5.70.53.1.2.1.18 | ColumnadGenDCProfileEgressQueue | read-create | current | Egress queue number. |
| 1.3.6.1.4.1.664.5.70.53.1.2.1.19 | ColumnadGenDCProfileCtagVlanType | read-create | current | Specify whether the C-Tag is being matched in this profile. If cTag is set, then the matching C-Tag value is specified in adGenDCProfileCtagVlan. If allCTags i… |
| 1.3.6.1.4.1.664.5.70.53.1.2.1.20 | ColumnadGenDCProfileCtagVlan | read-create | current | Customer VLAN ID used to identify traffic |
| 1.3.6.1.4.1.664.5.70.53.1.2.1.21 | ColumnadGenDCProfileCtagPriType | read-create | current | Specify whether the CTag is being matched in this profile. If cTagPri is set, then the matched CTag value is specified in adGenDCProfileCtagPri. |
| 1.3.6.1.4.1.664.5.70.53.1.2.1.22 | ColumnadGenDCProfileCtagPri | read-create | current | Priority used by the C-Tag on traffic meeting the match criteria. |
| 1.3.6.1.4.1.664.5.70.53.1.2.1.23 | ColumnadGenDCProfileEvcMap | read-create | current | Name of the EVC map. If null string is set, matching is disabled. Null string will be the default. |
| 1.3.6.1.4.1.664.5.70.53.1.2.1.24 | ColumnadGenDCProfileDiscardReason | read-create | current | Configures the dynamic counter to count packets that have been dropped due to one of the enumerated drop criteria. Discard reason 'none(11)' means that all pac… |
| 1.3.6.1.4.1.664.5.70.53.1.3 | TableadGenDCConfigTable | not-accessible | current | Provides information about dynamic counter configuration. This tables connects a profile and an interface into a dynamic counter entry. |
| 1.3.6.1.4.1.664.5.70.53.1.3.1 | RowadGenDCConfigEntry | not-accessible | current | Provides information about dynamic counter configuration. |
| 1.3.6.1.4.1.664.5.70.53.1.3.1.1 | ColumnadGenDCConfigIndex | not-accessible | current | The index of the dynamic counter. |
| 1.3.6.1.4.1.664.5.70.53.1.3.1.2 | ColumnadGenDCConfigRowStatus | read-create | current | This element provides the administrative state. This object is used to create a new dynamic counter, delete an existing dynamic counter, and to enable/disable … |
| 1.3.6.1.4.1.664.5.70.53.1.3.1.3 | ColumnadGenDCConfigProfile | read-create | current | The index of the adGenDCProfile that will be used. |
| 1.3.6.1.4.1.664.5.70.53.1.3.1.4 | ColumnadGenDCConfigInterface | read-create | current | The IfIndex of the interface that will be used. |
| 1.3.6.1.4.1.664.5.70.53.1.3.1.5 | ColumnadGenDCConfigType | read-create | current | The type of the statistics to be gathered, either tx, rx, or queue statistics. The statistics types are only supported if indicated in adGenDCSlotSupport. If q… |
| 1.3.6.1.4.1.664.5.70.53.1.3.1.6 | ColumnadGenDCConfigInterfaceQueue | read-create | current | Indicates the queue number, if adGenDCConfigType is set to queue. |
| 1.3.6.1.4.1.664.5.70.53.1.3.1.7 | ColumnadGenDCConfigInclude | read-create | current | Indicates whether the match to the counter profile should be included in the counts or excluded from the counts. The default value is to include them in the co… |
| 1.3.6.1.4.1.664.5.70.53.1.3.1.8 | ColumnadGenDCConfigLastError | read-only | current | The details of the last error seen for a dynamic counter, based on queries to this entry. This may include invalid values, reasons for rejecting configuration … |
| 1.3.6.1.4.1.664.5.70.53.1.4 | TableadGenDCStatusTable | not-accessible | current | Provides status about the dynamic counter table, including counts that have been collected. |
| 1.3.6.1.4.1.664.5.70.53.1.4.1 | RowadGenDCStatusEntry | not-accessible | current | Provides status about the dynamic counter table, including counts that have been collected. |
| 1.3.6.1.4.1.664.5.70.53.1.4.1.1 | ColumnadGenDCStatusRowStatus | read-only | current | This object is used to report the operational status of the dynamic counters, either inService or notReady. |
| 1.3.6.1.4.1.664.5.70.53.1.4.1.2 | ColumnadGenDCStatusOctets | read-only | current | The total number of octets / bytes counted by this dynamic counter. |
| 1.3.6.1.4.1.664.5.70.53.1.4.1.3 | ColumnadGenDCStatusPkts | read-only | current | The total number of packets counted by this dynamic counter. |
| 1.3.6.1.4.1.664.5.70.53.1.4.1.4 | ColumnadGenDCStatusAvgBitsPerSec | read-only | current | The average number of bits per second counted on the dynamic counter during the last 5 minutes. |
| 1.3.6.1.4.1.664.5.70.53.1.4.1.5 | ColumnadGenDCStatusClear | read-write | current | This will always report idle. To clear the dynamic counter counts, write clear(1) to this element. |
| 1.3.6.1.4.1.664.6.10000.70.53.1 | IdentityadGenDynamicCounterMIB | Adtran Dynamic Counter MIB |