ADTRAN-GEN-SELTDELT-MIB
17 objects
This is the MIB module that describes SELT / DELT functionality.
Imported Objects
| ADTRAN-GENSLOT-MIB | adGenSlotInfoIndex |
| ADTRAN-SHARED-XDSL-MIB | adGenXdsl adGenXdslID |
| IF-MIB | InterfaceIndex |
| SNMPv2-CONF | OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.664.5.73.1.1 | NodeadGenSeltDelt | |||
| 1.3.6.1.4.1.664.5.73.1.1.1 | TableadGenSeltDeltTable | not-accessible | current | This table contains information on the XDSL generic SELT / DELT feature. Each entry reflects a required parameter or action required to perform either the SELT… |
| 1.3.6.1.4.1.664.5.73.1.1.1.1 | RowadGenSeltDeltEntry | not-accessible | current | This table contains information on the SELT / DELT feature. The entries are used for SELT / DELT support and operation. |
| 1.3.6.1.4.1.664.5.73.1.1.1.1.1 | ColumnadGenSeltDeltTestPortNumber | read-write | current | Selected port number for test operation. The valid range is 0 up to the number of ports on the card. This is functionally equivalent to the port number of the … |
| 1.3.6.1.4.1.664.5.73.1.1.1.1.2 | ColumnadGenSeltDeltTestFilename | read-write | current | Name of the file to be transmitted via TFTP containing all of the test data for the selected interface. |
| 1.3.6.1.4.1.664.5.73.1.1.1.1.3 | ColumnadGenSeltDeltStartSELTTest | read-write | current | Used to initiate the SELT test for the xDSL port. When the SELT test has completed the data file can be transferred to a server via TFTP using adGenSeltDeltRet… |
| 1.3.6.1.4.1.664.5.73.1.1.1.1.4 | ColumnadGenSeltDeltStartDELTTest | read-write | current | Used to initiate the DELT test for the xDSL port. When the DELT test has completed the data file can be transferred to a server via TFTP using adGenSeltDeltRet… |
| 1.3.6.1.4.1.664.5.73.1.1.1.1.5 | ColumnadGenSeltDeltStopTest | read-write | current | Used to terminate the currently active test. A get is meaningless and will always return stop(1). |
| 1.3.6.1.4.1.664.5.73.1.1.1.1.6 | ColumnadGenSeltDeltCurrentTestStatus | read-only | current | Status of the currently active SELT or DELT test. |
| 1.3.6.1.4.1.664.5.73.1.1.1.1.7 | ColumnadGenSeltDeltLastTestStatus | read-only | current | Status of the last attempted SELT or DELT test. |
| 1.3.6.1.4.1.664.5.73.1.1.1.1.8 | ColumnadGenSeltDeltRetrieveData | read-write | current | Used to begin the transfer of the diagnostic data to a remote server for evaluation. A get is meaningless and always returns beginTransfer(1). |
| 1.3.6.1.4.1.664.5.73.1.1.1.1.9 | ColumnadGenSeltDeltEnumTestStatus | read-only | current | Used to display the state of the current test in an enumerated format. The descriptions of the values are: idle(1) - Signifies the unit can accept an activatio… |
| 1.3.6.1.4.1.664.5.73.1.1.1.1.10 | ColumnadGenSeltDeltTestRemoteDevice | read-write | current | The remote device index selected for test operation. NOTE: adGenSeltDeltTestPortNumber should be set to 0 prior to provisioning of this remote device indexing |
| 1.3.6.1.4.1.664.5.73.1.2 | NodeadGenXdslMibConformance | |||
| 1.3.6.1.4.1.664.5.73.1.2.1 | NodeadGenXdslMibGroups | |||
| 1.3.6.1.4.1.664.5.73.1.2.1.1 | GroupadGenXdslSeltDeltGroup | current | These objects provide support for xDSL SELT / DELT support and operation. | |
| 1.3.6.1.4.1.664.6.10000.73.1.1 | IdentityadGenSeltDeltMIB | This is the MIB module that describes SELT / DELT functionality. |