ADTRAN-GENDS1TEST-MIB
35 objects
The MIB module describing generic objects used for DS1 testing for any DS1 product developed by ADTRAN, Inc.
Imported Objects
| ADTRAN-GENPORT-MIB | adGenPortTrapIdentifier |
| ADTRAN-GENSLOT-MIB | adGenSlotInfoIndex |
| ADTRAN-GENTRAPINFORM-MIB | adTrapInformSeqNum |
| ADTRAN-MIB | adShared |
| ADTRAN-SHARED-DS1-MIB MISSING | adDS1 adGenDS1TestID |
| IF-MIB | ifIndex |
| SNMPv2-CONF | NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-MIB | sysName |
| SNMPv2-SMI | Gauge32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.664.5.78.1 | NodeadGenDS1Test | |||
| 1.3.6.1.4.1.664.5.78.1.1 | NodeadGenDS1TestCommand | |||
| 1.3.6.1.4.1.664.5.78.1.1.1 | TableadGenDS1TestCommandTable | not-accessible | current | This table supports DS1 test command parameters. |
| 1.3.6.1.4.1.664.5.78.1.1.1.1 | RowadGenDS1TestCommandEntry | not-accessible | current | An entry in the adGenDS1TestCommandTable. |
| 1.3.6.1.4.1.664.5.78.1.1.1.1.1 | ColumnadGenDS1TestTimeout | read-write | current | - This object defines the number of minutes that any near end or any far end test will be run. - Any locally initiated loopback or BERT, any local response to … |
| 1.3.6.1.4.1.664.5.78.1.1.1.1.2 | ColumnadGenDS1TestStartStop | read-write | current | nearEndStart - INITIALIZES and starts any near end test and counters farEndStart - INITIALIZES and starts any far end test and counters allStop - terminates al… |
| 1.3.6.1.4.1.664.5.78.1.1.1.1.3 | ColumnadGenDS1TestStatus | read-only | current | DS1 Test Status: - TBD |
| 1.3.6.1.4.1.664.5.78.1.1.1.1.4 | ColumnadGenDS1TestTimeRemaining | read-only | current | Initialized to adGenDS1TestTimeout upon reception of a Start object. 0 = occurs when near end test has ended. 0 = occurs when near end test is in progress, but… |
| 1.3.6.1.4.1.664.5.78.1.1.1.1.5 | ColumnadGenDS1TestTimeElapsed | read-only | current | 0 = initialization value at instance a test starts. >0 = occurs when near end test is in progress or just ended. |
| 1.3.6.1.4.1.664.5.78.1.2 | NodeadGenDS1TestNearEndLoopback | |||
| 1.3.6.1.4.1.664.5.78.1.2.1 | TableadGenDS1TestNearEndLoopbackTable | not-accessible | current | This table supports DS1 Test Near End Loopback parameters. |
| 1.3.6.1.4.1.664.5.78.1.2.1.1 | RowadGenDS1TestNearEndLoopbackEntry | not-accessible | current | An entry in the adGenDS1TestNearEndLoopbackTable. |
| 1.3.6.1.4.1.664.5.78.1.2.1.1.1 | ColumnadGenDS1TestNearEndLoopbackType | read-write | current | - This object selects the near end loopback that will be executed upon recognition of a start test. |
| 1.3.6.1.4.1.664.5.78.1.3 | NodeadGenDS1TestFarEndLoopback | |||
| 1.3.6.1.4.1.664.5.78.1.3.1 | TableadGenDS1TestFarEndLoopbackTable | not-accessible | current | This table supports DS1 Test Far End Loopback parameters. |
| 1.3.6.1.4.1.664.5.78.1.3.1.1 | RowadGenDS1TestFarEndLoopbackEntry | not-accessible | current | An entry in the adGenDS1TestFarEndLoopbackTable. |
| 1.3.6.1.4.1.664.5.78.1.3.1.1.1 | ColumnadGenDS1TestFarEndLpbkType | read-write | current | - This object selects the far end loopback that will be executed upon recognition of the adGenDS1TestFarEndStart object. |
| 1.3.6.1.4.1.664.5.78.1.3.1.1.2 | ColumnadGenDS1TestFarEndCSURequest | read-write | current | Enable/Disable Respond to incoming CSU Loop Up request. |
| 1.3.6.1.4.1.664.5.78.1.3.1.1.3 | ColumnadGenDS1TestFarEndFDLRequest | read-write | current | Enable/Disable Respond to incoming FDL Payload Loop Up request. |
| 1.3.6.1.4.1.664.5.78.1.3.1.1.4 | ColumnadGenDS1TestFarEndFEACRequest | read-write | current | Enable/Disable Respond to incoming FEAC DS1 Line Port Loop Up request. |
| 1.3.6.1.4.1.664.5.78.1.3.1.1.5 | ColumnadGenDS1TestFarEndFAC2NIURequest | read-write | current | Enable/Disable Respond to incoming FAC2 NIU Loop Up request. |
| 1.3.6.1.4.1.664.5.78.1.3.1.1.6 | ColumnadGenDS1TestFarEndCSUInwardRequest | read-write | current | Enable/Disable Response to incoming CSU-Inward Loop Up request. |
| 1.3.6.1.4.1.664.5.78.1.3.1.1.7 | ColumnadGenDS1TestFarEndFAC2NIUInwardRequest | read-write | current | Enable/Disable Response to incoming FAC2 NIU-Inward Loop Up request. |
| 1.3.6.1.4.1.664.5.78.1.4 | NodeadGenDS1TestPattern | |||
| 1.3.6.1.4.1.664.5.78.1.4.1 | TableadGenDS1TestPatternTable | not-accessible | current | This table supports DS1 Test Pattern parameters. |
| 1.3.6.1.4.1.664.5.78.1.4.1.1 | RowadGenDS1TestPatternEntry | not-accessible | current | An entry in the adGenDS1TestPatternTable. |
| 1.3.6.1.4.1.664.5.78.1.4.1.1.1 | ColumnadGenDS1TestPatternType | read-write | current | This object selects the DS1 BERT that will be generated and detected upon recognition of a start command. Note: notUsed# should not be selected! |
| 1.3.6.1.4.1.664.5.78.1.4.1.1.2 | ColumnadGenDS1TestPatternSync | read-only | current | true = pattern test is in progress and incoming test pattern is in sync; pattern test ended while incoming test pattern was in sync. false = pattern test is in… |
| 1.3.6.1.4.1.664.5.78.1.4.1.1.3 | ColumnadGenDS1TestPatternErrorsRcvd | read-only | current | 0 = initialization value when pattern test starts. >0 = increments for each logic error that occurs when pattern test is in progress AND while incoming test pa… |
| 1.3.6.1.4.1.664.5.78.1.4.1.1.4 | ColumnadGenDS1TestPatternInsertError | read-write | current | - Upon each reception of this object, 1 logic error is injected into DS1 payload if a pattern test is in progress. - The logic error is injected PRIOR to parit… |
| 1.3.6.1.4.1.664.5.78.1.4.1.1.5 | ColumnadGenDS1TestPatternResetCount | read-write | current | - Upon each reception of this object, the pattern error counter is reset to 0 if a far end pattern test is in progress. |
| 1.3.6.1.4.1.664.5.78.1.5 | NodeadGenDS1TestMibConformance | |||
| 1.3.6.1.4.1.664.5.78.1.5.1 | NodeadGenDS1TestMibGroups | |||
| 1.3.6.1.4.1.664.5.78.1.5.1.1 | GroupadGenDS1TestGroup | current | These objects provide support for DS1 test procedures. | |
| 1.3.6.1.4.1.664.6.10000.78.1.1 | IdentityadGenDS1TestIdentity | The MIB module describing generic objects used for DS1 testing for any DS1 product developed by ADTRAN, Inc. |