ADTRAN-GENERIC-BRIDGE-MIB
137 objects
Generic Bridge MIB
Imported Objects
| ADTRAN-GENPORT-MIB | adGenPortTrapIdentifier |
| ADTRAN-GENSLOT-MIB | adGenSlotInfoIndex |
| ADTRAN-GENTA5K-MIB | adGenBridge adGenBridgeID |
| ADTRAN-GENTRAPINFORM-MIB | adTrapInformSeqNum |
| IF-MIB | ifIndex InterfaceIndex |
| SNMPv2-MIB | sysName |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.664.5.67.1.16.1 | NodeadGenBridgeMIBObjects | |||
| 1.3.6.1.4.1.664.5.67.1.16.1.1 | TableadGenBridgeModuleConfTable | not-accessible | current | This table contains global bridge configuration parameters, per populated card slot. |
| 1.3.6.1.4.1.664.5.67.1.16.1.1.1 | RowadGenBridgeModuleConfEntry | not-accessible | current | This list contains bridge group limits per module . |
| 1.3.6.1.4.1.664.5.67.1.16.1.1.1.1 | ColumnadGenBridgeModuleMaxBridges | read-only | current | The maximum number of bridges this module will support. |
| 1.3.6.1.4.1.664.5.67.1.16.1.1.1.2 | ColumnadGenBridgeModuleMaxPhyls | read-only | current | The total number of physical links that may be mapped to bridges on the module, including active and inactive mappings. |
| 1.3.6.1.4.1.664.5.67.1.16.1.1.1.3 | ColumnadGenBridgeModuleConfBridges | read-only | current | The current number of bridges configured on the module. |
| 1.3.6.1.4.1.664.5.67.1.16.1.1.1.4 | ColumnadGenBridgeModuleConfPhyls | read-only | current | The total number of physical links currently mapped to bridges on the module, including in-service and out-of-service mappings. |
| 1.3.6.1.4.1.664.5.67.1.16.1.1.1.5 | ColumnadGenBridgeModuleMaxBandwidth | read-write | current | The maximum bandwith allocated for this module in kbps. |
| 1.3.6.1.4.1.664.5.67.1.16.1.1.1.6 | ColumnadGenBridgeModuleConfBandwidth | read-only | current | The bandwidth currently being used by this module in kbps. |
| 1.3.6.1.4.1.664.5.67.1.16.1.2 | ScalaradGenBridgeStatus | read-only | current | Error status messages for Bridge entities. |
| 1.3.6.1.4.1.664.5.67.1.16.1.3 | TableadGenBridgeTable | not-accessible | current | The Bridge table. A unique Bridge is created for every bonding or bridging instance, with an associated type that determines its functionality. |
| 1.3.6.1.4.1.664.5.67.1.16.1.3.1 | RowadGenBridgeEntry | not-accessible | current | An entry in the Bridge table. This entry is used to model a single instance of an aggregation (bridging or bonding) engine. |
| 1.3.6.1.4.1.664.5.67.1.16.1.3.1.1 | ColumnadGenBridgeIfIndex | not-accessible | current | The ifIndex value of the interface associated with this Bridge. The IANA type should be linegroup (210). |
| 1.3.6.1.4.1.664.5.67.1.16.1.3.1.2 | ColumnadGenBridgeType | read-create | current | The intended type of this bridge EFM, IMA, TR-101, etc. |
| 1.3.6.1.4.1.664.5.67.1.16.1.3.1.3 | ColumnadGenBridgeName | read-create | current | The textual name given to this Bridge. |
| 1.3.6.1.4.1.664.5.67.1.16.1.3.1.4 | ColumnadGenBridgeProtMode | read-only | current | The protection mode of the group single-slot (not protectable), unprotected (but potentially protectable), or protected. |
| 1.3.6.1.4.1.664.5.67.1.16.1.3.1.5 | ColumnadGenBridgeProtAvail | read-only | current | Indicates if the selected protection slot is available for protection switchover. |
| 1.3.6.1.4.1.664.5.67.1.16.1.3.1.6 | ColumnadGenBridgeProtState | read-only | current | Indicates if the protection card is actively running this bridge. |
| 1.3.6.1.4.1.664.5.67.1.16.1.3.1.7 | ColumnadGenBridgeProtSlot | read-only | current | A bit map of Protection Module slots part of this Protection Group. Slot 1 0x00000001 Slot 2 0x00000002 Slot 3 0x00000004 Slot 4 0x00000008 Slot 5 0x00000010 |… |
| 1.3.6.1.4.1.664.5.67.1.16.1.3.1.8 | ColumnadGenBridgeMinNumActivePhyls | read-create | current | The minimum number of active PHYLS that have to be mapped to this group before the OperStatus of the bridge can be declared to be 'up'. If the active number ev… |
| 1.3.6.1.4.1.664.5.67.1.16.1.3.1.9 | ColumnadGenBridgeOperStatus | read-only | current | The current operational status of the local end of the group. |
| 1.3.6.1.4.1.664.5.67.1.16.1.3.1.10 | ColumnadGenBridgeLastChange | read-only | current | The value of sysUpTime at the time this Bridge group entered its current operational state. |
| 1.3.6.1.4.1.664.5.67.1.16.1.3.1.11 | ColumnadGenBridgeNumCfgEVPLs | read-only | current | The number of EVPLs currently assigned against the ifIndex of this bridge. This value is incremented by the agent upon the creation of an EVPL against this bri… |
| 1.3.6.1.4.1.664.5.67.1.16.1.3.1.12 | ColumnadGenBridgeNumCfgEVCLs | read-only | current | The number of EVCLs currently assigned against the ifIndex of this bridge. This value is incremented by the agent upon the creation of an EVCL against this bri… |
| 1.3.6.1.4.1.664.5.67.1.16.1.3.1.13 | ColumnadGenBridgeNumCfgPhyls | read-only | current | The number of PHYLs currently mapped to this bridge. This value is incremented by the agent upon the creation of a Bridge-PHYL mapping. |
| 1.3.6.1.4.1.664.5.67.1.16.1.3.1.14 | ColumnadGenBridgeNumActPhyls | read-only | current | The number of PHYLs currently active as part of this group. |
| 1.3.6.1.4.1.664.5.67.1.16.1.3.1.15 | ColumnadGenBridgeLastError | read-only | current | The string describing the last error experienced. |
| 1.3.6.1.4.1.664.5.67.1.16.1.3.1.16 | ColumnadGenBridgeRowStatus | read-create | current | This object is used to create a new row or modify or delete an existing row in this table. Setting this value to 'active' indicates that the Bridge is administ… |
| 1.3.6.1.4.1.664.5.67.1.16.1.3.1.17 | ColumnadGenBridgeMaxBandwidth | read-create | current | The maximum bandwidth allocated for this bridge in kbps. |
| 1.3.6.1.4.1.664.5.67.1.16.1.3.1.18 | ColumnadGenBridgeCurrentBandwidth | read-only | current | The bandwith currently used by this bridge in kpbs. |
| 1.3.6.1.4.1.664.5.67.1.16.1.3.1.19 | ColumnadGenBridgeUpstreamRate | read-create | current | The Upstream Rate configured on the bridge in kbps. |
| 1.3.6.1.4.1.664.5.67.1.16.1.3.1.20 | ColumnadGenBridgeDownstreamRate | read-create | current | The Downstream Rate configured on the bridge in kbps. |
| 1.3.6.1.4.1.664.5.67.1.16.1.3.1.21 | ColumnadGenBridgeCurrentUpstreamRate | read-only | current | The Upstream Rate current status on the bridge in kbps. |
| 1.3.6.1.4.1.664.5.67.1.16.1.3.1.22 | ColumnadGenBridgeCurrentDownstreamRate | read-only | current | The Downstream Rate current status on the bridge in kbps. |
| 1.3.6.1.4.1.664.5.67.1.16.1.3.1.23 | ColumnadGenBridgeRateControl | read-create | current | Mode that divides the bridge rates over the links. Bridge Rate Control On is 1 Bridge Rate Control Off is 2 |
| 1.3.6.1.4.1.664.5.67.1.16.1.3.1.24 | ColumnadGenBridgeAlarmSuppress | read-create | current | Indicates whether or not alarms will be generated by this Bridge group. It is only applicable if rowStatus = active. |
| 1.3.6.1.4.1.664.5.67.1.16.1.3.1.25 | ColumnadGenBridgeSecondaryUpstreamRate | read-create | current | The Secondary Upstream Rate threshold configured on the bridge in kbps. This is only a threshold used to trigger an alarm. A non-zero value enables the alarm a… |
| 1.3.6.1.4.1.664.5.67.1.16.1.3.1.26 | ColumnadGenBridgeSecondaryDownstreamRate | read-create | current | The Secondary Downstream Rate threshold configured on the bridge in kbps. This is only a threshold used to trigger an alarm. A non-zero value enables the alarm… |
| 1.3.6.1.4.1.664.5.67.1.16.1.4 | ScalaradGenBridgePhylMapStatus | read-only | current | Error status messages for Bridge-PHYL mappings. |
| 1.3.6.1.4.1.664.5.67.1.16.1.5 | TableadGenBridgePhylMapTable | not-accessible | current | Row creation adds/maps the physical link to a bridge. |
| 1.3.6.1.4.1.664.5.67.1.16.1.5.1 | RowadGenBridgePhylMapEntry | not-accessible | current | An entry in the PHYL Map table. This entry is represents one link that is associated with a bridge. |
| 1.3.6.1.4.1.664.5.67.1.16.1.5.1.1 | ColumnadGenBridgePhylMapBridgeIfIndex | not-accessible | current | The ifIndex value of the Bridge to which the physical link is mapped. |
| 1.3.6.1.4.1.664.5.67.1.16.1.5.1.2 | ColumnadGenBridgePhylMapPhylIfIndex | not-accessible | current | The ifIndex value of the physical link. |
| 1.3.6.1.4.1.664.5.67.1.16.1.5.1.3 | ColumnadGenBridgePhylMapOperStatus | read-only | current | The current operational status of the Bridge-PHYL mapping indicating if the physical link is actively participating in the Bridge. This can be down if the row … |
| 1.3.6.1.4.1.664.5.67.1.16.1.5.1.4 | ColumnadGenBridgePhylMapLastChange | read-only | current | The value of sysUpTime at the time this Bridge-PHYL mapping entered its current operational state. |
| 1.3.6.1.4.1.664.5.67.1.16.1.5.1.5 | ColumnadGenBridgePhylMapLastError | read-only | current | The string describing the last error experienced. |
| 1.3.6.1.4.1.664.5.67.1.16.1.5.1.6 | ColumnadGenBridgePhylMapRowStatus | read-create | current | This object is used to create a new row or modify or delete an existing row in this table. Creating a row adds the PHYL to the Bridge. Setting this value to 'a… |
| 1.3.6.1.4.1.664.5.67.1.16.1.6 | TableadGenBridgePhylStatusTable | not-accessible | current | Displays the status of the available PHYLs in the system, including which Bridge (if any) a PHYL is associated. It also indicates the installed status of a cer… |
| 1.3.6.1.4.1.664.5.67.1.16.1.6.1 | RowadGenBridgePhylStatusEntry | not-accessible | current | An entry in the PHYL Status table. This entry is represents one link. |
| 1.3.6.1.4.1.664.5.67.1.16.1.6.1.1 | ColumnadGenBridgePhylStatusPhylIfIndex | not-accessible | current | The ifIndex value of the physical link. IANA type should be propVirtual(53). |
| 1.3.6.1.4.1.664.5.67.1.16.1.6.1.2 | ColumnadGenBridgePhylStatusBridgeIfIndex | read-only | current | The ifIndex value of the Bridge of which this physical link is apart. A value of '0' indicates that the link is currently not mapped to any Bridge. IANA type s… |
| 1.3.6.1.4.1.664.5.67.1.16.1.6.1.3 | ColumnadGenBridgePhylStatusBridgeType | read-only | current | Indicates the type (if any) of bridge with which this PHYL is associated. |
| 1.3.6.1.4.1.664.5.67.1.16.1.6.1.4 | ColumnadGenBridgePhylStatusInstallStatus | read-only | current | Indicates whether or not the physical interface associated with this PHYL exists. |
| 1.3.6.1.4.1.664.5.67.1.16.1.6.1.5 | ColumnadGenBridgePhylStatusOperStatus | read-only | current | The current operational status of the Bridge-PHYL Mapping. This status should match the adGenBridgePhylMapOperStatus of the corresponding row in the adGenBridg… |
| 1.3.6.1.4.1.664.5.67.1.16.1.7 | ScalaradGenBridgeProtectionGroupIndexNext | read-only | current | Returns the next available Protection Group Index. |
| 1.3.6.1.4.1.664.5.67.1.16.1.8 | ScalaradGenBridgeProtectionGroupStatus | read-only | current | Error status messages for Protection Group Creation. |
| 1.3.6.1.4.1.664.5.67.1.16.1.9 | TableadGenBridgeProtectionGroupTable | not-accessible | current | The Bridge Protection Group table. A unique Bridge Protection Group is created to protect bonding engine. This fecilitates creating a Protection Group and addi… |
| 1.3.6.1.4.1.664.5.67.1.16.1.9.1 | RowadGenBridgeProtectionGroupEntry | not-accessible | current | An entry in the Bridge Protection Group table. This entry is used to model a protection group for a protection engine. |
| 1.3.6.1.4.1.664.5.67.1.16.1.9.1.1 | ColumnadGenBridgeProtectionGroupGroupIndex | not-accessible | current | A unique value to identify this Bridge Protection Group. |
| 1.3.6.1.4.1.664.5.67.1.16.1.9.1.2 | ColumnadGenBridgeProtectionGroupBridgeType | read-create | current | Indicates the type of bridge this Protection Group is created for. This must be compatible with the Protection and Protected Module slot bridge type. |
| 1.3.6.1.4.1.664.5.67.1.16.1.9.1.3 | ColumnadGenBridgeProtectionGroupName | read-create | current | The textual name given to this Protection Group. |
| 1.3.6.1.4.1.664.5.67.1.16.1.9.1.4 | ColumnadGenBridgeProtectionGroupProtectingSlots | read-only | current | A bit map of Protection Module slots part of this Protection Group. Displays the Protection Modules in this Protection Group. Slot 1 0x00000001 Slot 2 0x000000… |
| 1.3.6.1.4.1.664.5.67.1.16.1.9.1.5 | ColumnadGenBridgeProtectionGroupProtectedSlots | read-only | current | A bit map of Bonding Engine slots to be protected (part of this Protection Group). Displays the Protecting Modules in this Protection Group. Slot 1 0x00000001 … |
| 1.3.6.1.4.1.664.5.67.1.16.1.9.1.6 | ColumnadGenBridgeProtectionGroupAddProtectingModule | read-create | current | Add a Protecting Module (slot) to the Protection Group identified by adGenBridgeProtectionGroupIndex. |
| 1.3.6.1.4.1.664.5.67.1.16.1.9.1.7 | ColumnadGenBridgeProtectionGroupAddProtectedModule | read-create | current | Add a Protected Module (slot) to the Protection Group identified by adGenBridgeProtectionGroupIndex. |
| 1.3.6.1.4.1.664.5.67.1.16.1.9.1.8 | ColumnadGenBridgeProtectionGroupRmvProtectingModule | read-create | current | Remove a Protecting Module (slot) from the Protection Group identified by adGenBridgeProtectionGroupIndex. |
| 1.3.6.1.4.1.664.5.67.1.16.1.9.1.9 | ColumnadGenBridgeProtectionGroupRmvProtectedModule | read-create | current | Remove a Protected Module (slot) from the Protection Group identified by adGenBridgeProtectionGroupIndex. |
| 1.3.6.1.4.1.664.5.67.1.16.1.9.1.10 | ColumnadGenBridgeProtectionGroupWaitToRestoreTime | read-create | current | In case of a revertive swicth, this indicates the time in minutes to wait before a switch back can take place. Wait To Restore time is set for the whole group … |
| 1.3.6.1.4.1.664.5.67.1.16.1.9.1.11 | ColumnadGenBridgeProtectionGroupLastError | read-only | current | The string describing the last error experienced provisioning the Protection Group or adding or removing Protection or Protected slots. |
| 1.3.6.1.4.1.664.5.67.1.16.1.9.1.12 | ColumnadGenBridgeProtectionGroupRowStatus | read-create | current | This object is used to create a new row or modify or delete an existing row in this table. Creating a row adds either a Protected Module or a Protecting Module… |
| 1.3.6.1.4.1.664.5.67.1.16.1.10 | TableadGenBridgeProtectionTable | not-accessible | current | The Bridge Protection table containing protection related provisioning for each of the Protected Modules or Protection Modules. This is a static table for all … |
| 1.3.6.1.4.1.664.5.67.1.16.1.10.1 | RowadGenBridgeProtectionEntry | not-accessible | current | An entry in the Bridge Protection table. This entry is used to provision the protection related parameters for bonding engine protection. These parameters are … |
| 1.3.6.1.4.1.664.5.67.1.16.1.10.1.1 | ColumnadGenBridgeProtectionGroupIndex | read-only | current | Displays the Protection Group Index this slot is part of. If this slot is not part of any Protection Group, then this value will be zero. |
| 1.3.6.1.4.1.664.5.67.1.16.1.10.1.2 | ColumnadGenBridgeProtectionBridgeType | read-only | current | This is the value read from the module that is plugged into the slot. If bridge type of this module is incompatible with the Bridge Type of the Protection Grou… |
| 1.3.6.1.4.1.664.5.67.1.16.1.10.1.3 | ColumnadGenBridgeProtectionVersion | read-only | current | This must be compatible with Protection and Protected Modules. A higher version Protection Module can protect a lower or equal version Protected module. This v… |
| 1.3.6.1.4.1.664.5.67.1.16.1.10.1.4 | ColumnadGenBridgeProtectionSlot | read-only | current | This is a read only value and indicates the slot number of this entry. |
| 1.3.6.1.4.1.664.5.67.1.16.1.10.1.5 | ColumnadGenBridgeProtectionState | read-only | current | This is a read only value and indicates state of the Protection or Protected Module. A value of zero indicates the module plugged into this slot is not being p… |
| 1.3.6.1.4.1.664.5.67.1.16.1.10.1.6 | ColumnadGenBridgeProtectionPriority | read-write | current | This is the priority of the Protected Modules within the protection group in case priority protection is enabled. This value can be set to zero. If all the Pro… |
| 1.3.6.1.4.1.664.5.67.1.16.1.10.1.7 | ColumnadGenBridgeProtectionRevertiveSwitch | read-write | current | Indicates whether revertive switch is enabled or not for this Protected Module. This item is not intended for the Protection Module and is ignored. |
| 1.3.6.1.4.1.664.5.67.1.16.1.10.1.8 | ColumnadGenBridgeProtectionLockout | read-write | current | Indicates whether lockout is enabled or not for this Module. |
| 1.3.6.1.4.1.664.5.67.1.16.1.10.1.9 | ColumnadGenBridgeProtectionManualSwitch | read-write | current | Indicates whether to do a manual switch to protection or to manual switch back from protect. Not intended for the Protection Module and is ignored. |
| 1.3.6.1.4.1.664.5.67.1.16.1.10.1.10 | ColumnadGenBridgeProtectionManualSwitchTime | read-write | current | In case a manual switch is triggered, this time in minutes indicates for how long the manual switch will be in effect. This item is not intended for the Protec… |
| 1.3.6.1.4.1.664.5.67.1.16.1.10.1.11 | ColumnadGenBridgeProtectionErrorStatus | read-only | current | Displays error status in case the manual switch command fails. |
| 1.3.6.1.4.1.664.5.67.1.16.1.11 | ScalaradGenBridgeBridgeNameLookupStatus | read-only | current | Error status messages for lookups. |
| 1.3.6.1.4.1.664.5.67.1.16.1.12 | TableadGenBridgeNameLookupTable | not-accessible | current | The Bridge Name Lookup table. As each bridge receives a name it is inserted into a lookup table along with it's ifIndex. |
| 1.3.6.1.4.1.664.5.67.1.16.1.12.1 | RowadGenBridgeNameLookupEntry | not-accessible | current | An entry in the Bridge Name Lookup table. This entry is used to store the bridge IfIndex and indexed by the name. |
| 1.3.6.1.4.1.664.5.67.1.16.1.12.1.1 | ColumnadGenBridgeNameLookupIndex | read-only | current | The sring name value of the the bridge enity |
| 1.3.6.1.4.1.664.5.67.1.16.1.12.1.2 | ColumnadGenBridgeNameIfIndex | read-only | current | The Bridge IfIndex that is retrieved from the table |
| 1.3.6.1.4.1.664.5.67.1.16.1.13 | ScalaradGenBridgeCount | read-only | current | The total number of bridges in the system. |
| 1.3.6.1.4.1.664.5.67.1.16.2 | NodeadGenEasyBridgeMIBObjects | |||
| 1.3.6.1.4.1.664.5.67.1.16.2.1 | ScalaradGenEasyBridgeIndexNext | read-only | current | Returns the next available EasyBridge index number. |
| 1.3.6.1.4.1.664.5.67.1.16.2.2 | TableadGenEasyBridgeTable | not-accessible | current | Activation of a row in this table causes the TA5000 to perform the following: 1) Verify that all pertinent parameters are set. 2) Verify that there are resourc… |
| 1.3.6.1.4.1.664.5.67.1.16.2.2.1 | RowadGenEasyBridgeEntry | not-accessible | current | Each entry corresponds to a different bridge. An entry will be deleted after 2 minutes of inactivity. This table is indexed by the values returned from the adG… |
| 1.3.6.1.4.1.664.5.67.1.16.2.2.1.1 | ColumnadGenEasyBridgeIndex | not-accessible | current | This is an arbitrary index assigned by the adGenEasyBridgeIndexNext OID. |
| 1.3.6.1.4.1.664.5.67.1.16.2.2.1.2 | ColumnadGenEasyBridgeName | read-create | current | This object must be set before a row is activated whether this row is 'Create' or 'Modify'. If it is 'Create' then this string will be set in the adGenBridgeNa… |
| 1.3.6.1.4.1.664.5.67.1.16.2.2.1.3 | ColumnadGenEasyBridgeType | read-create | current | The intended type of this bridge EFM, IMA, TR-101, etc. |
| 1.3.6.1.4.1.664.5.67.1.16.2.2.1.4 | ColumnadGenEasyBridgeCreateOrModify | read-create | current | This OID indicates if this row is attempting to create a new bridge or modify an existing one. If the mode is 'create' then the bridge will be created with the… |
| 1.3.6.1.4.1.664.5.67.1.16.2.2.1.5 | ColumnadGenEasyBridgeUpstreamRate | read-create | current | This object specifies the rate of the bridge for the upstream direction in Kbps. This parameter helps the agent determine the location of the bridge as well as… |
| 1.3.6.1.4.1.664.5.67.1.16.2.2.1.6 | ColumnadGenEasyBridgeDownstreamRate | read-create | current | This object specifies the rate of the bridge for the downstream direction in Kbps. This parameter helps the agent determine the location of the bridge as well … |
| 1.3.6.1.4.1.664.5.67.1.16.2.2.1.7 | ColumnadGenEasyBridgeMemberPhyls | read-create | current | This object is a comma delimited string of ifIndices. Each ifIndices corresponds to a GenBridgePhyl that should be attached to the bridge. This string must con… |
| 1.3.6.1.4.1.664.5.67.1.16.2.2.1.8 | ColumnadGenEasyBridgeMinNumActivePhyls | read-create | current | This object specifies the genBridgeMinNumActivePhyls value. It must always be at most the same number as phyls specified in adGenEasyBridgeMemberPhyls. If the … |
| 1.3.6.1.4.1.664.5.67.1.16.2.2.1.9 | ColumnadGenEasyBridgeStatusString | read-only | current | This object indicates the status of the last attempted activation of this row. It will indicate pass/fail status as well as reasons in the case of a failure. |
| 1.3.6.1.4.1.664.5.67.1.16.2.2.1.10 | ColumnadGenEasyBridgeRowStatus | read-create | current | For this row to go active all pertinent parameters must be set (see individual parameter descriptions) as well as the agent must be able to create a bridge or … |
| 1.3.6.1.4.1.664.5.67.1.16.2.2.1.11 | ColumnadGenEasyBridgeRateControl | read-create | current | |
| 1.3.6.1.4.1.664.5.67.1.16.2.2.1.12 | ColumnadGenEasyBridgeAddMemberPhyls | read-create | current | This object is a comma delimited string of ifIndices. This OID is referred to when adGenEasyBridgeCreateOrModify is set to modify(2), which must be done prior … |
| 1.3.6.1.4.1.664.5.67.1.16.2.2.1.13 | ColumnadGenEasyBridgeDeleteMemberPhyls | read-create | current | This object is a comma delimited string of ifIndices. This OID is referred to when adGenEasyBridgeCreateOrModify is set to modify(2), which must be done prior … |
| 1.3.6.1.4.1.664.5.67.1.16.3 | NodeadGenBridgeAlarmsPrefix | |||
| 1.3.6.1.4.1.664.5.67.1.16.3.0 | NodeadGenBridgeAlarms | |||
| 1.3.6.1.4.1.664.5.67.1.16.3.0.2 | NotificationadGenBridgeNonProtectedAlmCLR | current | Access Module Non-Protected | |
| 1.3.6.1.4.1.664.5.67.1.16.3.0.3 | NotificationadGenBridgeNonProtectedAlmACT | current | Access Module Non-Protected | |
| 1.3.6.1.4.1.664.5.67.1.16.3.0.4 | NotificationadGenBridgeProtectedAlmCLR | current | Access Module Protected | |
| 1.3.6.1.4.1.664.5.67.1.16.3.0.5 | NotificationadGenBridgeProtectedAlmACT | current | Access Module Protected | |
| 1.3.6.1.4.1.664.5.67.1.16.3.0.6 | NotificationadGenBridgeNeedsProtectionAlmCLR | current | Access Module Needs-Protection | |
| 1.3.6.1.4.1.664.5.67.1.16.3.0.7 | NotificationadGenBridgeNeedsProtectionAlmACT | current | Access Module Needs Protection | |
| 1.3.6.1.4.1.664.5.67.1.16.3.0.8 | NotificationadGenBridgeManualProtectionAlmCLR | current | Access Module ManualSwitch Protection | |
| 1.3.6.1.4.1.664.5.67.1.16.3.0.9 | NotificationadGenBridgeManualProtectionAlmACT | current | Access Module ManualSwitch Protection | |
| 1.3.6.1.4.1.664.5.67.1.16.3.0.10 | NotificationadGenBridgeLockoutProtectionAlmCLR | current | Access Module Protection Lockout | |
| 1.3.6.1.4.1.664.5.67.1.16.3.0.11 | NotificationadGenBridgeLockoutProtectionAlmACT | current | Access Module Protection Lockout | |
| 1.3.6.1.4.1.664.5.67.1.16.4 | NodeadGenBulkBridge | |||
| 1.3.6.1.4.1.664.5.67.1.16.4.1 | TableadGenBridgeBulkInstanceTable | not-accessible | current | Table contains instances that are created when there is a request to a bulk bridge instance. |
| 1.3.6.1.4.1.664.5.67.1.16.4.1.1 | RowadGenBridgeBulkInstanceEntry | not-accessible | current | Index is the slot number. |
| 1.3.6.1.4.1.664.5.67.1.16.4.1.1.1 | ColumnadGenBridgeBulkInstance | read-only | current | Used to index the TlV table; Each time this is called by slot it creates an instance for that viewer. Once an instance is created, it may be found by doing a g… |
| 1.3.6.1.4.1.664.6.10000.67.1.16.1 | IdentityadGenBridgeMIB | Generic Bridge MIB |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AdGenBridgeAlarmSuppress | INTEGER { suppress(1), noSuppress(2) } | current | Indicates whether or not alarms will be generated by this interface. It is only applicable if rowStatus = active. |
| AdGenBridgeLastChange | TimeTicks | current | The value of MIB II's sysUpTime at the time a virtual link or cross-connect entered its current operational state. If the current state was entered prior to the last re-initialization of the agent then this object conta… |
| AdGenBridgeManualSwitch | INTEGER { switchToProtect(1), switchToNonProtect(2) } | current | Triggers a switch to protected or Non Protected. |
| AdGenBridgeOperStatus | INTEGER { up(1), down(2), testing(3), noLinksInGroup(4), upPartial(5) } | current | The value determines the operational status of a bridge or cross-connect. The up and down states indicate that the traffic flow is enabled or disabled respectively on the bridge or cross-connect. |
| AdGenBridgePhylInstalled | INTEGER { uninstalled(1), installed(2) } | current | Indicates whether or not the physical interface associated with this PHYL exists. |
| AdGenBridgePhylOperStatus | INTEGER { up(1), down(2), testing(3), unknown(4) } | current | The current operational status of the Bridge-PHYL mapping indicating if the physical link is actively participating in the Bridge. This can be down if the row status of the BridgePhyl Map entry is down, the row status o… |
| AdGenBridgeProtAvail | INTEGER { unsupported(1), unavailable(2), available(3) } | current | Indicates if the selected protection slot is available for protection switchover. |
| AdGenBridgeProtectionLockout | INTEGER { enabled(1), disabled(2) } | current | Indicates whether Lockout is enabled or disabled. |
| AdGenBridgeProtectionRevertiveSwitch | INTEGER { enabled(1), disabled(2) } | current | Indicates whether Revertive Switch is enabled or disabled. |
| AdGenBridgeProtMode | INTEGER { unsupported(1), unprotected(2), protected(3) } | current | Specifies the protection mode of a particular bridge. Unsupported indicates that the particular bridge cannot support protection. Unprotected indicates that the particular bridge could support protection but chooses not… |
| AdGenBridgeProtState | INTEGER { unsupported(1), unprotected(2), protected(3) } | current | Indicates if the protection card is actively running this bonding group. |
| AdGenBridgeRateControl | INTEGER { rateControlOn(1), rateControlOff(2) } | current | This value indicates the rate control is enabled or not |
| AdGenBridgeType | INTEGER { notProvisioned(1), efm(2), tr101(3), ima(4), linkAggregation(5), macSwitched(6), ppp(7), atm(8) } | current | This value indicates the particular type of bridge, such as EFM, TR101, IMA, etc. The enumeration should be updated for each new bridge type that is created. |
| AdGenProtectionVersion | INTEGER { notsupported(0), version1(1) } | current | Version indicates the capacity of protection module. Whether the Protection Module is capable of protecting the Protected Modules. A higher version (capacity) Protection Module can be compatible with a lower version of … |