ADTRAN-GENETHLBK-MIB
39 objects
This MIB defines the objects for the Ethernet Loopback MIB.
Imported Objects
| ADTRAN-SHARED-CND-SYSTEM-MIB MISSING | adGenEthLbk adGenEthLbkID |
| IF-MIB | ifIndex InterfaceIndex InterfaceIndexOrZero |
| SNMPv2-MIB | sysName |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString MacAddress RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.664.5.70.50.1 | IdentityadGenEthLbkMIB | This MIB defines the objects for the Ethernet Loopback MIB. | ||
| 1.3.6.1.4.1.664.5.70.50.1 | NodeadGenEthLbkScalars | |||
| 1.3.6.1.4.1.664.5.70.50.1.1 | ScalaradGenEthLbkSystemMACAddress | read-write | current | This object is used to configure a system level MAC address that can be used by the loopback objects. The value returned may or not be considered valid. See ad… |
| 1.3.6.1.4.1.664.5.70.50.1.2 | ScalaradGenEthLbkSystemMACAddressValid | read-write | current | This object indicates whether or not the value returned by adGenEthLbkSystemMACAddress is valid. This object will automatically be set to true(1) if a valid SE… |
| 1.3.6.1.4.1.664.5.70.50.1.3 | ScalaradGenEthLbkSystemMACAddressError | read-only | current | This object indicates the reason why the last SET of adGenEthLbkSystemMACAddress failed. |
| 1.3.6.1.4.1.664.5.70.50.2 | NodeadGenEthLbkProvisioning | |||
| 1.3.6.1.4.1.664.5.70.50.2.1 | TableadGenEthLbkElementProvTable | not-accessible | current | This table is used for provisioning at the element level. |
| 1.3.6.1.4.1.664.5.70.50.2.1.1 | RowadGenEthLbkElementProvEntry | not-accessible | current | An entry in the element provisioning table. |
| 1.3.6.1.4.1.664.5.70.50.2.1.1.1 | ColumnadGenEthLbkElementIndex | not-accessible | current | Index used to access an element in the system. While the type is InterfaceIndex, the value contained refers to an element rather than an interface. |
| 1.3.6.1.4.1.664.5.70.50.2.1.1.2 | ColumnadGenEthLbkElementLastFacCreateError | read-only | current | This object contains the error encountered during the last failed facility loopback creation attempt. A blank string indicates no failure has occured. |
| 1.3.6.1.4.1.664.5.70.50.2.1.1.3 | ColumnadGenEthLbkElementLastTermCreateError | read-only | current | This object contains the error encountered during the last failed terminal loopback creation attempt. A blank string indicates no failure has occured. |
| 1.3.6.1.4.1.664.5.70.50.2.2 | TableadGenEthLbkFacProvTable | not-accessible | current | This table is used for provisioning of a facility Ethernet loopback In a facility loopback, a flow ingressing the specified MEN port is turned back toward that… |
| 1.3.6.1.4.1.664.5.70.50.2.2.1 | RowadGenEthLbkFacProvEntry | not-accessible | current | An entry in the facility loopback provisioning table. |
| 1.3.6.1.4.1.664.5.70.50.2.2.1.1 | ColumnadGenEthLbkFacName | not-accessible | current | Name of the facility Ethernet loopback. This name is unique amongst all facility loopbacks residing on an element. |
| 1.3.6.1.4.1.664.5.70.50.2.2.1.2 | ColumnadGenEthLbkFacRowStatus | read-create | current | This object is used to create a new loopback or modify or delete an existing loopback. |
| 1.3.6.1.4.1.664.5.70.50.2.2.1.3 | ColumnadGenEthLbkFacAdminState | read-create | current | This object is used to control the administrative state of the loopback. |
| 1.3.6.1.4.1.664.5.70.50.2.2.1.4 | ColumnadGenEthLbkFacRunningStatus | read-only | current | The current status of the loopback. If the status is notRunning(2), adGenEthLbkFacRunningStatusString will contain the reason. |
| 1.3.6.1.4.1.664.5.70.50.2.2.1.5 | ColumnadGenEthLbkFacRunningStatusString | read-only | current | A string representation of the current status. If adGenEthLbkFacRunningStatus returns notRunning(2), this object will contain the reason it isn't running. |
| 1.3.6.1.4.1.664.5.70.50.2.2.1.6 | ColumnadGenEthLbkFacInterface | read-create | current | The interface the loopback is to be applied to. The specified interface must be configured as an active MEN port, i.e. connected to a running EVC. Traffic ingr… |
| 1.3.6.1.4.1.664.5.70.50.2.2.1.7 | ColumnadGenEthLbkFacMatchStag | read-create | current | The value of the s-tag used to filter out the loopback traffic. A value of -1 indicates the traffic isn't being filtered by an s-tag value. |
| 1.3.6.1.4.1.664.5.70.50.2.2.1.8 | ColumnadGenEthLbkFacMatchPbit | read-create | current | The value of the p-bit used to filter out the loopback traffic. A value of -1 indicates the traffic isn't being filtered by a p-bit value. |
| 1.3.6.1.4.1.664.5.70.50.2.2.1.9 | ColumnadGenEthLbkFacMatchMACDAExplicit | read-create | current | The value of the destination MAC address used to filter out the loopback traffic. If adGenEthLbkFacMatchMACDAMode is not set to explicit(1), then the value of … |
| 1.3.6.1.4.1.664.5.70.50.2.2.1.10 | ColumnadGenEthLbkFacMatchMACDAMode | read-create | current | This object specifies how/if a specified MAC address is being used as a loopback traffic filter. none(0) means no MAC address is being used explicit(1) means t… |
| 1.3.6.1.4.1.664.5.70.50.2.2.1.11 | ColumnadGenEthLbkFacMatchMACSAExplicit | read-create | current | The value of the source MAC address used to filter out the loopback traffic. If adGenEthLbkFacMatchMACSAMode is not set to explicit(1), then the value of this … |
| 1.3.6.1.4.1.664.5.70.50.2.2.1.12 | ColumnadGenEthLbkFacMatchMACSAMode | read-create | current | This object specifies how/if a specified MAC address is being used as a loopback traffic filter. none(0) means no MAC address is being used explicit(1) means t… |
| 1.3.6.1.4.1.664.5.70.50.2.3 | TableadGenEthLbkTermProvTable | not-accessible | current | This table is used for provisioning of a terminal Ethernet loopback In a terminal loopback, a flow is turned back at the UNI prior to where that flow would oth… |
| 1.3.6.1.4.1.664.5.70.50.2.3.1 | RowadGenEthLbkTermProvEntry | not-accessible | current | An entry in the terminal loopback provisioning table. |
| 1.3.6.1.4.1.664.5.70.50.2.3.1.1 | ColumnadGenEthLbkTermName | not-accessible | current | Name of the terminal Ethernet loopback. This name is unique amongst all terminal loopbacks residing on an element. |
| 1.3.6.1.4.1.664.5.70.50.2.3.1.2 | ColumnadGenEthLbkTermRowStatus | read-create | current | This object is used to create a new loopback or modify or delete an existing loopback. |
| 1.3.6.1.4.1.664.5.70.50.2.3.1.3 | ColumnadGenEthLbkTermAdminState | read-create | current | This object is used to control the administrative state of the loopback. |
| 1.3.6.1.4.1.664.5.70.50.2.3.1.4 | ColumnadGenEthLbkTermRunningStatus | read-only | current | The current status of the loopback. If the status is notRunning(2), adGenEthLbkTermRunningStatusString will contain the reason. |
| 1.3.6.1.4.1.664.5.70.50.2.3.1.5 | ColumnadGenEthLbkTermRunningStatusString | read-only | current | A string representation of the current status. If adGenEthLbkTermRunningStatus returns notRunning(2), this object will contain the reason it isn't running. |
| 1.3.6.1.4.1.664.5.70.50.2.3.1.6 | ColumnadGenEthLbkTermInterface | read-create | current | The interface the loopback is to be applied to. The specified interface must be configured as an active UNI port, i.e. connected to a running EVC-map. Traffic … |
| 1.3.6.1.4.1.664.5.70.50.2.3.1.7 | ColumnadGenEthLbkTermMatchStag | read-create | current | The value of the s-tag used to filter out the loopback traffic. A value of -1 indicates the traffic isn't being filtered by an s-tag value. |
| 1.3.6.1.4.1.664.5.70.50.2.3.1.8 | ColumnadGenEthLbkTermMatchPbit | read-create | current | The value of the p-bit used to filter out the loopback traffic. A value of -1 indicates the traffic isn't being filtered by a p-bit value. |
| 1.3.6.1.4.1.664.5.70.50.2.3.1.9 | ColumnadGenEthLbkTermMatchMACDAExplicit | read-create | current | The value of the destination MAC address used to filter out the loopback traffic. If adGenEthLbkTermMatchMACDAMode is not set to explicit(1), then the value of… |
| 1.3.6.1.4.1.664.5.70.50.2.3.1.10 | ColumnadGenEthLbkTermMatchMACDAMode | read-create | current | This object specifies how/if a specified MAC address is being used as a loopback traffic filter. none(0) means no MAC address is being used explicit(1) means t… |
| 1.3.6.1.4.1.664.5.70.50.2.3.1.11 | ColumnadGenEthLbkTermMatchMACSAExplicit | read-create | current | The value of the source MAC address used to filter out the loopback traffic. If adGenEthLbkTermMatchMACSAMode is not set to explicit(1), then the value of this… |
| 1.3.6.1.4.1.664.5.70.50.2.3.1.12 | ColumnadGenEthLbkTermMatchMACSAMode | read-create | current | This object specifies how/if a specified MAC address is being used as a loopback traffic filter. none(0) means no MAC address is being used explicit(1) means t… |