ADTRAN-GENGPON-MIB
410 objects
GPON MIB
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.664.6.10000.76.1.1 | IdentityadGenGponMIB | GPON MIB | ||
| 1.3.6.1.4.1.664.6.10000.76.1.1.1 | NodeadGponConfiguration | |||
| 1.3.6.1.4.1.664.6.10000.76.1.1.1.1 | TableadGenGponOltConfigTable | not-accessible | current | The GPON Olt Configuration table. Each table entry corresponds to GPON OLT card |
| 1.3.6.1.4.1.664.6.10000.76.1.1.1.1.1 | RowadGenGponOltConfigEntry | not-accessible | current | An entry in the Gpon Olt Configuration table. This entry represents a particular GPON OLT. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.1.1.1.1 | ColumnadGenGponOltSystemUpTime | read-only | current | A string containing the time since the OLT was last re-initialized. The string is in one of the following formats: d days, h hours, m minutes, s seconds w week… |
| 1.3.6.1.4.1.664.6.10000.76.1.1.1.1.1.2 | ColumnadGenGponOltOntSwVersionOnFlash | read-only | current | The version of the ONT software stored on OLT flash and currently available for ONT upgrade. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.1.1.1.3 | ColumnadGenGponOltOntBootCodeSwVersionOnFlash | read-only | current | The version of the ONT boot code software stored on OLT flash and currently available for ONT upgrade. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.1.1.1.4 | ColumnadGenGponOltMaxOntsPerPon | read-only | current | The maximum number of ONTs per PON that the OLT supports. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.1.1.1.5 | ColumnadGenGponOltNumPons | read-only | current | The number of PONs that the OLT has. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.1.1.1.6 | ColumnadGenGponOltOntSwOnFlashGlbFilename | read-only | current | The GLB file name used to upload the ONT image file currently stored in the OLT Flash file system. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2 | NodeadGponProvisioning | |||
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.1 | TableadGenGponOltProvTable | not-accessible | current | The GPON OLT provisioning table. Each table entry corresponds to a specific GPON OLT card |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.1.1 | RowadGenGponOltProvEntry | not-accessible | current | An entry in the Gpon OLT provisioning table. This entry represents a particular GPON OLT card. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.1.1.1 | ColumnadGenGponOltStagTpid | read-only | current | The S-tag tpid value (set from SM). |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.1.1.2 | ColumnadGenGponOltCtagTpid | read-write | current | The C-tag tpid value (provisionable from AM); |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.1.1.3 | ColumnadGenGponOltGponClock | read-write | current | This option is used to select the timing system for the GPON services. `local` uses the timing signals from OLT and other option uses the timing signals from t… |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.1.1.4 | ColumnadGenGponOltBackplaneNegSpeed | read-only | current | The backplane negotiated speed rate for the OLT in Gbps. e.g. 1G X 1 CH is 1Gbps across 1 Channel and 2.5G is 2.5Gbps |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.1.1.5 | ColumnadGenGponOltBipTcaThreshold | read-write | current | The BIP threshold value for raising/clear upstream/downstream BIP Threshold Crossing Alarm, valid values 0, 3-9 0 to disable the alarm, 3-9 to enable the alarm… |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.1.1.6 | ColumnadGenGponProtection | read-write | current | A card level provisioning item used for PON Redundancy. This item is used determine which card is the protecting card of a Protected pair. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.1.1.7 | ColumnadGenGponOntAlarmSlotLosEnable | read-write | current | A card level provisioning item used to enable the ONT LOS alarm. Affects all ONTs on the slot. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.1.1.8 | ColumnadGenGponOntAlarmSlotLosLevel | read-write | current | A card level provisioning item used for Alarm Severity. This item is used to set the severity of the ONT LOS Alarm. Affects all ONTs on the slot. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.1.1.9 | ColumnadGenGponOntAlarmSlotPoweringEnable | read-write | current | A card level provisioning item used to enable the ONT Powering alarm. Affects all ONTs on the slot. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.1.1.10 | ColumnadGenGponOntAlarmSlotPoweringLevel | read-write | current | A card level provisioning item used for Alarm Severity. This item is used to set the severity of the ONT Powering Alarm. Affects all ONTs on the slot. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.1.1.11 | ColumnadGenGponOntAlarmSlotDyingGaspEnable | read-write | current | A card level provisioning item used to enable the ONT Dying Gasp alarm. Affects all ONTs on the slot. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.1.1.12 | ColumnadGenGponOntAlarmSlotDyingGaspLevel | read-write | current | A card level provisioning item used for Alarm Severity. This item is used to set the severity of the ONT Dying Gasp Alarm. Affects all ONTs on the slot. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.2 | TableadGenGponPonProvTable | not-accessible | current | The GPON PON provisioning table. Each table entry corresponds to a specific GPON PON Interface |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.2.1 | RowadGenGponPonProvEntry | not-accessible | current | An entry in the Gpon PON provisioning table. This entry represents a particular GPON PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.2.1.1 | ColumnadGenGponPonDownstreamFec | read-write | current | Downstream FEC mode value of GPON PON interface |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.2.1.2 | ColumnadGenGponPonAutoDiscoveryMode | read-write | current | Auto discovery mode value of GPON PON interface |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.2.1.3 | ColumnadGenGponPonAutoOntActivateMode | read-write | current | Auto activation of ONTs discovered on GPON PON interface |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.2.1.4 | ColumnadGenGponPonOntSoftwareDownloadFlag | read-write | current | Starting and cancelling the download of the software version currenly available on OLT flash to all of active ONTs on this PON interface. startAndDeferActivate… |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.2.1.5 | ColumnadGenGponPonRediscoverFlag | read-write | current | Send the wakeup all ploam message and triggers the PON discovery cycle |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.2.1.6 | ColumnadGenGponOntLastCreateError | read-only | current | The reason for the last error that occured while attempting to create an entry in the ONT Prov Table. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.2.1.7 | ColumnadGenGponPonDeploymentRange | read-write | current | The deployment range for each PON can be selected. Standard range supports upto 20 Km at the maximum rate of 1.2 Gbps Extended range supports upto 37.5 Km at t… |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.2.1.8 | ColumnadGenGponPonActivationMode | read-write | current | The ONT activation mode used on this GPON interface |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.2.1.9 | ColumnadGenGponPonResourceAllocationMode | read-write | current | The resource allocation mode used on this GPON interface |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.2.1.10 | ColumnadGenGponPonLosActiveThreshold | read-write | current | The percentage of ONTs activated once that are in LOS condition. Minimum setting is 0%, maximum is 100% and the user can provision in increments of 5%. The def… |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.2.1.11 | ColumnadGenGponPonMulticastBwThreshold | read-write | current | The multicast bandwidth threshold value on the PON. The valid range is 0 through the maximum PON downstream link rate in Mbps. The default value of 0 is used t… |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.2.1.12 | ColumnadGenGponPonMulticastCac | read-write | current | Enable or disable multicast CAC on the PON. The default value 'disable' is used to disable the multicast CAC |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.2.1.13 | ColumnadGenGponPonDownstreamTotalMinRate | read-write | current | The total minimum rate per pon that can be distributed among onts on the pon to maintain minimum qos. A set on this OID with value lower than the cumulative mi… |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.2.1.14 | ColumnadGenGponPonUpstreamFec | read-write | current | Upstream FEC mode value of GPON PON interface |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.2.1.15 | ColumnadGenGponPonDescriptionString | read-write | current | Description for this particular GPON PON. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.2.1.16 | ColumnadGenGponPonTechnologyMode | read-only | current | Indicates the fixed PON technology mode for this interface |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.3 | TableadGenGponOntProvTable | not-accessible | current | The ONT-G provisioning table. Each table entry corresponds to a specific GPON ONT Equipment. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.3.1 | RowadGenGponOntProvEntry | not-accessible | current | An entry in the ONT-G provisioning table. This entry represents a particular GPON ONT Equipment. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.3.1.1 | ColumnadGenGponOntSerialNumber | read-write | current | The manufacturer's serial number for this particular GPON ONT. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.3.1.2 | ColumnadGenGponOntDescriptionString | read-write | current | Description for this particular GPON ONT. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.3.1.3 | ColumnadGenGponOntBatteryBackup | read-write | current | Whether battery backup is enabled for this GPON ONT. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.3.1.4 | ColumnadGenGponOntAdminState | read-write | current | The admin state of the GPON ONT. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.3.1.5 | ColumnadGenGponOntAesMode | read-write | current | Enable/Disable AES security feature on downstream traffic on this GPON ONT. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.3.1.6 | ColumnadGenGponOntSecurityMode | read-write | current | The security mode of the GPON ONT. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.3.1.7 | ColumnadGenGponOntSoftwareVersion | read-write | current | The software version of the GPON ONT. The software can be upgraded on the ONT by setting this OID with the version different than the version currently running… |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.3.1.8 | ColumnadGenGponOntGr303VoiceMacAddress | read-write | current | The MAC address assigned for the ONT GR-303-controlled voice ports. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.3.1.9 | ColumnadGenGponOntUpstreamFixedBandwidth | read-write | current | Subscription of upstream Fixed bandwidth (kbps) value on this GPON ONT. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.3.1.10 | ColumnadGenGponOntUpstreamAssuredBandwidth | read-write | current | Subscription of upstream Assured bandwidth (kbps) value on this GPON ONT |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.3.1.11 | ColumnadGenGponOntUpstreamBestEffortBandwidth | read-write | current | Subscription of upstream BestEffort bandwidth (kbps) value on this GPON ONT |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.3.1.12 | ColumnadGenGponOntUpstreamNonAssuredBandwidth | read-write | current | Subscription of upstream Non Assured bandwidth (bps) value on this GPON ONT |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.3.1.13 | ColumnadGenGponOntPotsServiceMode | read-write | current | Setting the pots service mode on the ONT. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.3.1.14 | ColumnadGenGponOntLastError | read-only | current | The last error reported by this ONT Interface configuration entity. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.3.1.15 | ColumnadGenGponOntRowStatus | read-write | current | This object is used to create a new row or modify or delete an existing row in this table. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.3.1.16 | ColumnadGenGponOntPortLastCreateError | read-only | current | The reason for the last error that occured while attempting to create an entry in the ONT Port Prov Table. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.3.1.17 | ColumnadGenGponOntRegistrationId | read-write | current | The user programmed registration id of this GPON ONT. Used for ONT activation if serial number not a prefered one. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.3.1.18 | ColumnadGenGponOntBootCodeSoftwareVersion | read-write | current | The boot code software version of the GPON ONT. The software can be upgraded on the ONT by setting this OID with the version different than the version current… |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.3.1.19 | ColumnadGenGponConfigFileRetrievalMethod | read-write | current | The method used, if any, to retrieve a config file from an ONT. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.3.1.20 | ColumnadGenGponConfigFilePrimaryServer | read-write | current | The primary server serving a configuration file. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.3.1.21 | ColumnadGenGponConfigFileSecondaryServer | read-write | current | The secondary server serving a configuration file. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.3.1.22 | ColumnadGenGponConfigFileInterface | read-write | current | The interface used to retrieve the configuration file. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.3.1.23 | ColumnadGenGponConfigFilePath | read-write | current | The configuration file path. Contains the file name and any parameters passed to the config file server. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.3.1.24 | ColumnadGenGponConfigFileRetrieve | read-write | current | Used to trigger the config file retrieval by the ONT when there is a change in provisioning. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.3.1.25 | ColumnadGenGponMacSpoofingAllowed | read-write | current | Enable/Disable the ability to dynamically move mac addresses across ports on the same ONT. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.3.1.26 | ColumnadGenGponAcsServerProfile | read-write | current | Attach an ACS profile to an ONT. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.3.1.27 | ColumnadGenGponOntVoIPConfigMethod | read-write | current | Specifies which method to use in order to configure VoIP to ONT. localONT: configure VoIP using the local ONT CLI commands; omci: configure VoIP using OMCI VoI… |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.3.1.28 | ColumnadGenGponOntVectoringEnable | read-write | current | Set vdsl vectoring mode for all vdsl ports for this GPON ONT. Default value is disabled(0). |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.3.1.29 | ColumnadGenGponOntSoftwareDownloadOnly | read-write | current | Setting this OID with the ONT software version will start the software download to the ONT. This will only download the software but will not activate/commit t… |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.3.1.30 | ColumnadGenGponOntSoftwareActivate | read-write | current | Setting this OID will reboot the ONT and activate and commit the inactive software on the ONT. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.3.1.31 | ColumnadGenGponOntCpuRateLimitCountersClear | read-write | current | Clears CPU Rate Limit Good and Drop Packets count. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.4 | TableadGenGponOntPortProvTable | not-accessible | current | The ONT port provisioning table. Each table entry corresponds to an interface port. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.4.1 | RowadGenGponOntPortProvEntry | not-accessible | current | An entry in the ONT port provisioning table. This entry represents an individual port of a particular type. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.4.1.1 | ColumnadGenGponOntPortAdminState | read-write | current | The Admin state of the GPON ONT Port. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.4.1.2 | ColumnadGenGponOntPortAutoDetectionConfiguration | read-write | deprecated | The Auto Detection Configuration value of GPON ONT Ethernet Port. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.4.1.3 | ColumnadGenGponOntPortBridgeIdorIpInd | read-write | current | The Bridge or IP Indication value of GPON ONT Ethernet Port. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.4.1.4 | ColumnadGenGponOntPortEthLoopbackConfiguration | read-write | current | The Loop back configuration of GPON ONT Ethernet Port. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.4.1.5 | ColumnadGenGponOntPortMaxFrameSize | read-write | current | The Maximum frame size allowed on GPON ONT Ethernet Port. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.4.1.6 | ColumnadGenGponOntPortDteOrDceInd | read-write | current | The DCE or DTE indication value of GPON ONT Ethernet Port. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.4.1.7 | ColumnadGenGponOntPortPauseTime | read-write | current | The Pause time value of GPON ONT Ethernet Port. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.4.1.8 | ColumnadGenGponOntPortPPPoEFilter | read-write | current | The PPPoE Filter value of GPON ONT Ethernet Port. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.4.1.9 | ColumnadGenGponOntPortPowerControl | read-write | current | The power control value of GPON ONT Ethernet Port. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.4.1.10 | ColumnadGenGponOntPortImpedance | read-write | current | Impedance for GPON ONT Pots Port. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.4.1.11 | ColumnadGenGponOntPortTransmissionPath | read-write | current | Transmission mode of GPON ONT Pots Port. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.4.1.12 | ColumnadGenGponOntPortRxGain | read-write | current | Gain value for the received signal in the GPON ONT Pots Port. Unit is tenth of dB. Allowed range -120 to 60 |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.4.1.13 | ColumnadGenGponOntPortTxGain | read-write | current | Gain value for the transmit signal in the GPON ONT Pots Port. Unit is tenth of dB. Allowed range -120 to 60 |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.4.1.14 | ColumnadGenGponOntPortPotsHoldoverTime | read-write | current | Determines the time during which POTS loop voltage is held up when the ONT is not ranged on the PON. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.4.1.15 | ColumnadGenGponOntPortPreprovIndicationFlag | read-write | current | The flag to indicate whether the entry exists real or pre-provisioned from mgmt system. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.4.1.16 | ColumnadGenGponOntPortLastError | read-only | current | The last error reported by this Interface configuration entity. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.4.1.17 | ColumnadGenGponOntPortRowStatus | read-write | current | This object is used to create a new row or modify or delete an existing row in this table. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.4.1.18 | ColumnadGenGponOntPortOmciEthProvPrelimCheck | read-only | current | The status of the OMCI Ethernet provisioning of this Interface to the degree that it can be determined by the OLT. The OLT must evaluate and accept commands on… |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.4.1.19 | ColumnadGenGponOntVideoPortEnableLOSAlarm | read-write | current | Used to enable/disable the LOS alarm generation on the ONT Video port . |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.4.1.20 | ColumnadGenGponOntVideoPortEnableOORLowAlarm | read-write | current | Used to enable/disable the OOR LOW alarm generation on the ONT Video port . |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.4.1.21 | ColumnadGenGponOntVideoPortEnableOORHighAlarm | read-write | current | Used to enable/disable the OOR HIGH alarm generation on the ONT Video port . |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.4.1.22 | ColumnadGenGponOntVideoPortReturnPathMode | read-write | current | This OID specifies the format to be used for the VRP service. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.4.1.23 | ColumnadGenGponOntVideoPortReturnPathFrequency | read-write | current | This OID specifies the VRP tuner frequency to use, in units of kHz. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.4.1.24 | ColumnadGenGponOntVideoPortReturnPathDestinationIPAddress | read-write | current | This OID specifies the IP address of the HEAD-END server for VRP service. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.4.1.25 | ColumnadGenGponOntVideoPortReturnPathDestinationUDPPort | read-write | current | This OID specifies the UDP port to use at the HEAD-END server for VRP service. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.4.1.26 | ColumnadGenGponOntVideoPortReturnPathSourceUDPPort | read-write | current | This OID specifies the UDP port to use at the ONT for VRP service. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.4.1.27 | ColumnadGenGponOntPortDescriptionString | read-write | current | Description for this particular GPON ONT Port. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.4.1.28 | ColumnadGenGponOntPortMapVEIPIfIndex | read-write | current | This is the ifIndex of the Virtual Ethernet Interface Point(VEIP) interface connected to a physical Ethernet ONT port. If zero, no VEIP is connected. For a SET… |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.4.1.29 | ColumnadGenGponOntPortMapBridgeGroupIfIndex | read-write | current | This is the ifIndex of a BridgeGroup of which this physical Ethernet ONT port is a member. If zero, port is not member of any BridgeGroup. For a SET operation … |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.4.1.30 | ColumnadGenGponOntPortBridgeGroupAgingTime | read-write | current | This attribute specifies the age of dynamic filtering entries in the bridge database, after which unrefreshed entries are discarded. In accordance with [IEEE 8… |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.4.1.31 | ColumnadGenGponOntPortBridgeGroupLearningLimit | read-write | current | This attribute specifies the maximum number of UNI MAC addresses to be learned by the bridge. The default value 0 specifies that there is no administratively-i… |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.4.1.32 | ColumnadGenGponOntPortBondingPeer | read-write | current | This attribute specifies the peer port number for 2-pair EFM Bonding. The default value 0 specifies that this port is not bonded and will operate as a single E… |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.5 | TableadGenGponOntPortExtendedFeatureProvTable | not-accessible | current | This is the extension of ONT port provisioning table. Each table entry corresponds to an interface port supported by a circuit pack inserted into a GPON ONT sl… |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.5.1 | RowadGenGponOntPortExtendedFeatureProvEntry | not-accessible | current | An entry in the ONT port extended feature provisioning table. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.5.1.1 | ColumnadGenGponOntPortArc | read-write | current | The ARC of the ONT interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.5.1.2 | ColumnadGenGponOntPortArcInterval | read-write | current | The ARC Interval of the ONT interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.5.1.3 | ColumnadGenGponOntPortSfThreshold | read-write | current | The SF threshold of the PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.5.1.4 | ColumnadGenGponOntPortSdThreshold | read-write | current | The SD threshold of the PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.5.1.5 | ColumnadGenGponOntPortLowerOpticalThreshold | read-write | current | The lower optical level threshold of the PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.5.1.6 | ColumnadGenGponOntPortUpperOpticalThreshold | read-write | current | The upper optical level threshold of the PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.5.1.7 | ColumnadGenGponOntPortGr303signalingCodeMode | read-write | current | Gr303 signaling mode of the GPON ONT voice port. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.5.1.8 | ColumnadGenGponOntPortGr303LineLoopBack | read-write | current | Gr303 Loop back value of the GPON ONT voice port. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.5.1.9 | ColumnadGenGponOntPortGr303PayloadLoopBack | read-write | current | Gr303 pay load Loop back value of the GPON ONT voice port. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.5.1.10 | ColumnadGenGponOntPortGr303VoiceIpAddress | read-write | current | Gr303 voice ip address of the GPON ONT voice port. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.6 | TableadGenGponPonDiscoveredOntSnTable | not-accessible | current | The GPON PON Discovered ONT Serial Number table. Each table entry corresponds to a specific GPON PON Interface |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.6.1 | RowadGenGponPonDiscoveredOntSnEntry | not-accessible | current | An entry in the Gpon PON Discovered ONT Serial Number table. This entry represents a particular Discovered ONT Serial Number. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.6.1.1 | ColumnadGenGponPonDiscoveredOntSerialNumberIndex | read-only | current | The list index of unrecognized ONT serial number that are learned as part of discovery process on this PON interface. The actual range is a compile time consta… |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.6.1.2 | ColumnadGenGponPonDiscoveredOntSerialNumber | read-only | current | The serial number of the unrecognized ONT that are learned as part of discovery process on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.2.6.1.3 | ColumnadGenGponPonDiscoveredRegistrationId | read-only | current | The registration id of the unrecognized ONT that are learned as part of discovery process on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3 | NodeadGponStatus | |||
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.1 | TableadGenGponOntStatusTable | not-accessible | current | The GPON ONT status table. Each table entry corresponds to a specific GPON ONT Equipment. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.1.1 | RowadGenGponOntStatusEntry | not-accessible | current | An entry in the ONT-G status table. This entry represents a particular GPON ONT Equipment. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.1.1.1 | ColumnadGenGponOntNumber | read-only | current | A unique value of each GPON ONT on the PON. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.1.1.2 | ColumnadGenGponOntTrafficManagementOption | read-only | current | The traffic management option supported by the GPON ONT. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.1.1.3 | ColumnadGenGponOntOmccVersion | read-only | current | The OMCC version supported by the GPON ONT. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.1.1.4 | ColumnadGenGponOntMode | read-only | current | The operating mode of the ONT PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.1.1.5 | ColumnadGenGponOntEquipmentID | read-only | current | The CLEI code of the GPON ONT. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.1.1.6 | ColumnadGenGponOntUpTime | read-only | current | A string containing the time since the ONT was last re-initialized. The string is in one of the following formats: d days, h hours, m minutes, s seconds w week… |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.1.1.7 | ColumnadGenGponOntOperState | read-only | current | The operational state of the GPON ONT. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.1.1.8 | ColumnadGenGponOntSoftwareDownloadStatus | read-only | current | The software upload status of the particular GPON ONT. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.1.1.9 | ColumnadGenGponOntSoftwareDownloadProgress | read-only | current | The software upload progress(in %) of the particular GPON ONT. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.1.1.10 | ColumnadGenGponOntActiveSoftwareVersion | read-only | current | The current running software version of the GPON ONT. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.1.1.11 | ColumnadGenGponOntCurrentAvailableUpstreamBandwidth | read-only | current | The upstream bandwidth (minus all overheads) currently (kbps) available for subscription (on a particular PON). |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.1.1.12 | ColumnadGenGponOntPartNumber | read-only | current | The Part Number of the GPON ONT. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.1.1.13 | ColumnadGenGponOntHardwareRevision | read-only | current | The Hardware revision/version of the GPON ONT. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.1.1.14 | ColumnadGenGponOntCurrentAvailableDownstreamBandwidth | read-only | current | The downstream bandwidth (minus all overheads) currently (kbps) available for subscription (on a particular PON). |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.1.1.15 | ColumnadGenGponOntLearnedSerialNumber | read-only | current | The unique Serial number of GPON ONT. Mainly useful to show the learned serial number when registration id mode is used during activation. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.1.1.16 | ColumnadGenGponOntRssi | read-only | current | The OLT's RSSI (Received Signal Strength Indicatior) for this GPON ONT's optical signal. It is a measurement of this GPON ONT's optical transceiver power level… |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.1.1.17 | ColumnadGenGponAvailableVOIPConfigMethods | read-only | current | Holds the bitmap of the configuration methods supported by the ONT. Will hold zero if no methods supported. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.1.1.18 | ColumnadGenGponConfigFileState | read-only | current | Holds the state of the ONT configuration file processing. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.1.1.19 | ColumnadGenGponConfigFileChecksum | read-only | current | The MD5 digest of the ONT local config file. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.1.1.20 | ColumnadGenGponConfigErrorString | read-only | current | The error string associated with the config file alarm reported by the ONT. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.1.1.21 | ColumnadGenGponOntUpstreamBIPError | read-only | current | The rolling counter of BIP (Bit-Interleaved Parity) errors for the ONT's upstream traffic flow: ONT => OLT |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.1.1.22 | ColumnadGenGponOntDownstreamBIPError | read-only | current | The rolling counter of BIP (Bit-Interleaved Parity) errors for the ONT's downstream traffic flow: OLT => ONT |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.1.1.23 | ColumnadGenGponOntUpstreamGoodDBRuCounter | read-only | current | The rolling counter of Good DBRu (Dynamic Bandwidth Report Upstream) for the ONT's upstream traffic: ONT => OLT |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.1.1.24 | ColumnadGenGponOntUpstreamBadDBRuCounter | read-only | current | The rolling counter of Bad (CRC error) DBRu (Dynamic Bandwidth Report Upstream) for the ONT's upstream traffic: ONT => OLT |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.1.1.25 | ColumnadGenGponAcsServerProfileUserName | read-only | current | The generated TR69 username for this ONT. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.1.1.26 | ColumnadGenGponAcsServerProfilePassword | read-only | current | The generated TR69 password for this ONT. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.1.1.27 | ColumnadGenGponOntFeatureSupport | read-only | current | Holds the bitmap of the features supported by the ONT. Will hold zero if no features supported. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.1.1.28 | ColumnadGenGponOntInactiveSoftwareVersion | read-only | current | The current standby software version of the GPON ONT. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.1.1.29 | ColumnadGenGponOntManagementMacAddress | read-only | current | The management MAC of the ONT either associated with ONT RADIUS CLIENT or with it's subtended Host provisioning. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.1.1.30 | ColumnadGenGponOntFiberLength | read-only | current | ONT Fiber distance in meters. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.1.1.31 | ColumnadGenGponOntEqualizationDelay | read-only | current | ONT Equalization Delay in bits. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.1.1.32 | ColumnadGenGponOntRxPower | read-only | current | The ONT's receive optical signal level. It is a measurement of the OLT's optical launch power (tenths of dBm), received by the ONT's optical transceiver. The d… |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.1.1.33 | ColumnadGenGponOntTxPower | read-only | current | The ONT's transmit optical signal level. It is a measurement of the ONT's optical launch power (tenths of dBm). The default value -9999 indicates that the valu… |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.1.1.34 | ColumnadGenGponOntProductName | read-only | current | The Product Name of the ONT. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.1.1.35 | ColumnadGenGponOntEverActivated | read-only | current | Indicates if ONT has been previously in the 'up' state on its PON. This value should be false upon ONT ID creation but should return true once the ONT is in th… |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.1.1.36 | ColumnadGenGponOntTemperature | read-only | current | The ONT's temperature. It is a measurement of the ONT's temperature (degrees C). The default value 127 indicates that the value is not available. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.1.1.37 | ColumnadGenGponOntBiasCurrent | read-only | current | The ONT's laser bias current. It is a measurement of the ONT's measured bias current (mA). The default value 0 indicates that the value is not available. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.1.1.38 | ColumnadGenGponOntVoltage | read-only | current | The ONT's transmit optical signal level. It is a measurement of the ONT's voltage (tenths of V). The default value 0 indicates that the value is not available. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.1.1.39 | ColumnadGenGponOntUsFecProcessedCodewords | read-only | current | The rolling counter of FEC (Forward Error Correction) code words processed for the ONT's upstream traffic flow toward the OLT. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.1.1.40 | ColumnadGenGponOntUsFecCorrectedCodewords | read-only | current | The rolling counter of FEC (Forward Error Correction) code words that were corrected for the ONT's upstream traffic flow toward the OLT. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.1.1.41 | ColumnadGenGponOntUsFecCorrectedCodebytes | read-only | current | The rolling counter of FEC (Forward Error Correction) code bytes that were corrected for the ONT's upstream traffic flow toward the OLT. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.1.1.42 | ColumnadGenGponOntUsFecUncorrectedCodewords | read-only | current | The rolling counter of FEC (Forward Error Correction) code words that were uncorrected for the ONT's upstream traffic flow toward the OLT. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.1.1.43 | ColumnadGenGponGalEthDiscardedFrames | read-only | current | The rolling counter of downstream GEM frames discarded for any reason. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.2 | TableadGenGponOntPortStatusTable | not-accessible | current | The ONT Port status table. Each table entry corresponds to a port of the GPON ONT. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.2.1 | RowadGenGponOntPortStatusEntry | not-accessible | current | An entry in the ONT port status table. This entry represents a particular ONT Port. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.2.1.1 | ColumnadGenGponOntPortNumber | read-only | current | The GPON ONT Port Number. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.2.1.2 | ColumnadGenGponOntPortSrIndication | read-only | current | The SR Indication for the PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.2.1.3 | ColumnadGenGponOntPortPiggybackDbaReporting | read-only | current | The configuration option for piggyback DBA reporting for the GPON ONT Physical Pon Interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.2.1.4 | ColumnadGenGponOntPortWholeOnuDbaReporting | read-only | current | The whole-onu DBA reporting configuration option for the GPON ONT physical Pon Interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.2.1.5 | ColumnadGenGponOntPortOpticalSignalLevel | read-only | current | The optical signal level (in dBmW) of the PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.2.1.6 | ColumnadGenGponOntPortType | read-only | current | The type of GPON ONT Port technology. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.2.1.7 | ColumnadGenGponOntPortConfigurationInd | read-only | current | The Port Configuration Indication value of GPON ONT Ethernet Port. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.2.1.8 | ColumnadGenGponOntPortMaxGemPayloadSize | read-only | current | Max Pay load size supported on the GPON ONT Gem Port. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.2.1.9 | ColumnadGenGponOntPortHookState | read-only | current | Current state of the subscriber line in the GPON ONT Pots Port. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.2.1.10 | ColumnadGenGponOntPortOperState | read-only | current | The operational state of the GPON ONT Port. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.2.1.11 | ColumnadGenGponOntPortGemBlockLength | read-only | current | The GEM Block Length configured for the PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.2.1.12 | ColumnadGenGponOntPortGr303CrvPortNumber | read-only | current | The mapped GR303 CRV port number of the POTS interface (based on the static mapping calculation). |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.2.1.13 | ColumnadGenGponOntPortRFSignalLevel | read-only | current | The RF signal level is a measurement of this GPON ONT's RF port output signal level in dBmV. A return value of -9999 indicates that a valid value can not be ob… |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.2.1.14 | ColumnadGenGponOntPortRFOpticalSignalLevel | read-only | current | The optical signal level (in dBuW) of the Video(RF) port. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.2.1.15 | ColumnadGenGponOntPortErrorString | read-only | current | The error string associated with the ONT port. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.2.1.16 | ColumnadGenGponOntPortConnectToVEIP | read-only | current | Array reporting the UNI connected to the specified Virtual Ethernet Interface Point. When a UNI is connected to a Virtual Ethernet Interface Point the port id … |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.2.1.17 | ColumnadGenGponOntPortConnectToBridgeGroup | read-only | current | Array reporting the UNI connected to the specified Bridge group. When a UNI is connected to a Bridge group the port id will be assigned to the first available … |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.3 | TableadGenGponOntInventoryInfoTable | not-accessible | current | The ONT Inventory Info. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.3.1 | RowadGenGponOntInventoryInfoEntry | not-accessible | current | This entry represents a particular ONT technology. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.3.1.1 | ColumnadGenGponOntSupportedType | read-only | current | The supported GPON ONT technology/type (Ex: Ethernet, Pots, etc..) |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.3.1.2 | ColumnadGenGponOntMaxPortsPerType | read-only | current | The Maximum available ports per technology/type (reported from ONT). |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.4 | TableadGenGponPonStatusTable | not-accessible | current | The GPON PON status table. Each table entry corresponds to a specific GPON PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.4.1 | RowadGenGponPonStatusEntry | not-accessible | current | This entry represents a particular GPON PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.4.1.1 | ColumnadGenGponPonOntSoftwareDownloadInProgress | read-only | current | Indicates whether or not the ONT software download is in progress on this GPON PON interface |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.4.1.2 | ColumnadGenGponPonConfiguredOnts | read-only | current | Shows the number of ONTs configured in this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.4.1.3 | ColumnadGenGponPonDiscoveringOnts | read-only | current | Shows the number of ONTs discovering in this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.4.1.4 | ColumnadGenGponPonUnrecognizedOnts | read-only | current | Shows the number of ONTs unrecognized in this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.4.1.5 | ColumnadGenGponPonOperationallyUpOnts | read-only | current | Shows the number of ONTs that are operationally UP in this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.4.1.6 | ColumnadGenGponPonAvailableUpstreamBandwidth | read-only | current | The available PIR upstream bandwidth in kbps in this PON interface. This will always be the line rate when oversubscription is supported - more best effort ban… |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.4.1.7 | ColumnadGenGponPonAvailableDownstreamBandwidth | read-only | current | Shows the available downstream bandwidth in kbps in this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.4.1.8 | ColumnadGenGponPonLongestFiberDistance | read-only | current | Shows the longest fiber distance in metres in this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.4.1.9 | ColumnadGenGponPonShortestFiberDistance | read-only | current | Shows the shortest fiber distance in metres in this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.4.1.10 | ColumnadGenGponPonNearestOnt | read-only | current | Shows the nearest ONT ID to this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.4.1.11 | ColumnadGenGponPonFarthestOnt | read-only | current | Shows the farthest ONT ID to this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.4.1.12 | ColumnadGenGponPonTotalProvDownstreamBandwidth | read-only | current | The sum of all peak information rates on running downstream shapers provisioned on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.4.1.13 | ColumnadGenGponPonTotalProvUpstreamBandwidth | read-only | current | The sum of all peak information rates on running upstream shapers provisioned on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.4.1.14 | ColumnadGenGponPonTotalProvFixedAssuredBandwidth | read-only | current | The sum of all fixed and assured rates on running upstream shapers provisioned on this PON interface. The sum includes OMCI, VOIP, and PWE bandwidth as well as… |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.4.1.15 | ColumnadGenGponPonNextAvailableOntId | read-only | current | The first available ONT ID (in numeric order) that can be assigned to an ONT on this PON interface. A value of -1 means no ONT ID available for use. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.4.1.16 | ColumnadGenGponPonAvailableFixedAssuredBandwidth | read-only | current | Shows the available fixed and assured bandwidth in kbps left on this PON before reaching the line rate. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.4.1.17 | ColumnadGenGponPonCurrDownstreamBandwidth | read-only | current | Shows the downstream bandwidth in kbps setup in hardware on this PON. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.4.1.18 | ColumnadGenGponPonCurrUpstreamBandwidth | read-only | current | Shows the upstream bandwidth in kbps setup in hardware on this PON. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.4.1.19 | ColumnadGenGponPonCurrFixedAssuredBandwidth | read-only | current | Shows the fixed and assured bandwidth in kbps setup in hardware on this PON. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.4.1.20 | ColumnadGenGponPonTotalProvFixedBandwidth | read-only | current | The sum of all fixed rates in kbps on running upstream shapers provisioned on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.4.1.21 | ColumnadGenGponPonTotalProvAssuredBandwidth | read-only | current | The sum of all assured rates in kbps on running upstream shapers provisioned on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.4.1.22 | ColumnadGenGponPonMaxOnts | read-only | current | The maximum number of ONTs that can be running on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.4.1.23 | ColumnadGenGponPonMaxServicesPerOnt | read-only | current | The maximum number of services that can be running per ONT on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.4.1.24 | ColumnadGenGponPonLosNumOntsDown | read-only | current | The number of ONTs that are operationally down on a PON that causes to exceed the PON LOS active threshold and raise the PON LOS alarm. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.4.1.25 | ColumnadGenGponPonMulticastCacStatus | read-only | current | The multicast CAC status on the PON. If 'rejecting' any new IGMP group join messages would be rejected due to CAC. If 'admitting' IGMP joins would not be rejec… |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.4.1.26 | ColumnadGenGponPonDownstreamAvailableMinRate | read-only | current | The available per PON downstream min rate. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.4.1.27 | ColumnadGenGponPonDownstreamCurrentMinRate | read-only | current | The total subscribed minimum rate (bandwidth) by all onts on the pon. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.4.1.28 | ColumnadGenGponPonTechnology | read-only | current | Indicates the PON technology on this interface |
| 1.3.6.1.4.1.664.6.10000.76.1.1.3.4.1.29 | ColumnadGenGponPonWavelength | read-only | current | The current wavelength of this PON interface |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4 | NodeadGponPerformance | |||
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.1 | TableadGenGponPon15MinPMTable | not-accessible | current | The GPON PON PM table. Each table entry corresponds to GPON PON interface |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.1.1 | RowadGenGponPon15MinPMEntry | not-accessible | current | An entry in the GPON PON PM table. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.1.1.1 | ColumnadGenGponPon15MinPMIntervalNumber | not-accessible | current | A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours and 45 minutes prior … |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.1.1.2 | ColumnadGenGponPon15MinRxEthernetPackets | read-only | current | The count of received ethernet packets on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.1.1.3 | ColumnadGenGponPon15MinRxOMCIPackets | read-only | current | The count of received OMCI packets on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.1.1.4 | ColumnadGenGponPon15MinTxEthernetPackets | read-only | current | The count of transmitted ethernet packets on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.1.1.5 | ColumnadGenGponPon15MinTxOMCIPackets | read-only | current | The count of transmitted OMCI packets on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.1.1.6 | ColumnadGenGponPon15MinUpstreamBIPError | read-only | current | The count of BIP error in the upstream direction on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.1.1.7 | ColumnadGenGponPon15MinUpstreamDroppedPackets | read-only | current | The count of dropped packets in the upstream direction on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.1.1.8 | ColumnadGenGponPon15MinBufferOverflow | read-only | current | The count of buffer overflow on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.1.1.9 | ColumnadGenGponPon15MinPacketFragError | read-only | current | The count of packet fragmentation error on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.1.1.10 | ColumnadGenGponPon15MinIntervalTimeStamp | read-only | current | Timestamp of the 15-minute interval |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.1.1.11 | ColumnadGenGponPon15MinRxEthernetBytes | read-only | current | The count of received ethernet bytes on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.1.1.12 | ColumnadGenGponPon15MinTxEthernetBytes | read-only | current | The count of transmitted ethernet bytes on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.1.1.13 | ColumnadGenGponPon15MinUsBwAverageUtil | read-only | current | Upstream average bandwidth percent utilization in 100th of a percent on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.1.1.14 | ColumnadGenGponPon15MinUsBwPeakUtil | read-only | current | Upstream peak bandwidth percent utilization in 100th of a percent on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.1.1.15 | ColumnadGenGponPon15MinDsBwAverageUtil | read-only | current | Downstream average bandwidth percent utilization in 100th of a percent on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.1.1.16 | ColumnadGenGponPon15MinDsBwPeakUtil | read-only | current | Downstream peak bandwidth percent utilization in 100th of a percent on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.1.1.17 | ColumnadGenGponPon15MinDsMulticastPackets | read-only | current | The count of downstream multicast packets on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.1.1.18 | ColumnadGenGponPon15MinDsMulticastBytes | read-only | current | The count of downstream multicast bytes on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.1.1.19 | ColumnadGenGponPon15MinDsMulticastBwAverageUtil | read-only | current | Downstream multicast average bandwidth percent utilization in 100th of a percent on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.1.1.20 | ColumnadGenGponPon15MinDsMulticastBwPeakUtil | read-only | current | Downstream multicast peak bandwidth percent utilization in 100th of a percent on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.1.1.21 | ColumnadGenGponPon15MinDownstreamBIPError | read-only | current | The count of BIP error in the downstream direction on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.2 | TableadGenGponPon24HrPMTable | not-accessible | current | The GPON PON PM table. Each table entry corresponds to GPON PON interface |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.2.1 | RowadGenGponPon24HrPMEntry | not-accessible | current | An entry in the GPON PON PM table. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.2.1.1 | ColumnadGenGponPon24HrPMIntervalNumber | not-accessible | current | A number between 1 and 7, where 1 is the most recently completed 1 day interval and 7 is the 24 hour interval completed 6 days prior to interval 1. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.2.1.2 | ColumnadGenGponPon24HrRxEthernetPackets | read-only | current | The count of received ethernet packets on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.2.1.3 | ColumnadGenGponPon24HrRxOMCIPackets | read-only | current | The count of received OMCI packets on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.2.1.4 | ColumnadGenGponPon24HrTxEthernetPackets | read-only | current | The count of transmitted ethernet packets on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.2.1.5 | ColumnadGenGponPon24HrTxOMCIPackets | read-only | current | The count of transmitted OMCI packets on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.2.1.6 | ColumnadGenGponPon24HrUpstreamBIPError | read-only | current | The count of BIP error in the upstream direction on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.2.1.7 | ColumnadGenGponPon24HrUpstreamDroppedPackets | read-only | current | The count of dropped packets in the upstream direction on this PONinterface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.2.1.8 | ColumnadGenGponPon24HrBufferOverflow | read-only | current | The count of buffer overflow on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.2.1.9 | ColumnadGenGponPon24HrPacketFragError | read-only | current | The count of packet fragmentation error on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.2.1.10 | ColumnadGenGponPon24HrIntervalTimeStamp | read-only | current | Timestamp of the 24-hr interval |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.2.1.11 | ColumnadGenGponPon24HrRxEthernetBytes | read-only | current | The count of received ethernet bytes on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.2.1.12 | ColumnadGenGponPon24HrTxEthernetBytes | read-only | current | The count of transmitted ethernet bytes on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.2.1.13 | ColumnadGenGponPon24HrUsBwAverageUtil | read-only | current | Upstream average bandwidth percent utilization in 100th of a percent on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.2.1.14 | ColumnadGenGponPon24HrUsBwPeakUtil | read-only | current | Upstream peak bandwidth percent utilization in 100th of a percent on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.2.1.15 | ColumnadGenGponPon24HrDsBwAverageUtil | read-only | current | Downstream average bandwidth percent utilization in 100th of a percent on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.2.1.16 | ColumnadGenGponPon24HrDsBwPeakUtil | read-only | current | Downstream peak bandwidth percent utilization in 100th of a percent on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.2.1.17 | ColumnadGenGponPon24HrDsMulticastPackets | read-only | current | The count of downstream multicast packets on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.2.1.18 | ColumnadGenGponPon24HrDsMulticastBytes | read-only | current | The count of downstream multicast bytes on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.2.1.19 | ColumnadGenGponPon24HrDsMulticastBwAverageUtil | read-only | current | Downstream multicast average bandwidth percent utilization in 100th of a percent on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.2.1.20 | ColumnadGenGponPon24HrDsMulticastBwPeakUtil | read-only | current | Downstream multicast peak bandwidth percent utilization in 100th of a percent on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.2.1.21 | ColumnadGenGponPon24HrDownstreamBIPError | read-only | current | The count of BIP error in the downstream direction on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.3 | TableadGenGponPonCurrent15MinPMTable | not-accessible | current | The GPON PON PM table. Each table entry corresponds to GPON PON interface |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.3.1 | RowadGenGponPonCurrent15MinPMEntry | not-accessible | current | An entry in the GPON PON PM table. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.3.1.2 | ColumnadGenGponPonRxEthernetPacketsCurrent15Min | read-only | current | The current 15 mins count of received ethernet packets on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.3.1.3 | ColumnadGenGponPonRxOMCIPacketsCurrent15Min | read-only | current | The current 15 mins count of received OMCI packets on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.3.1.4 | ColumnadGenGponPonTxEthernetPacketsCurrent15Min | read-only | current | The current 15 mins count of transmitted ethernet packets on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.3.1.5 | ColumnadGenGponPonTxOMCIPacketsCurrent15Min | read-only | current | The current 15 mins count of transmitted OMCI packets on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.3.1.6 | ColumnadGenGponPonUpstreamBIPErrorCurrent15Min | read-only | current | The current 15 mins count of BIP error in the upstream direction on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.3.1.7 | ColumnadGenGponPonUpstreamDroppedPacketsCurrent15Min | read-only | current | The current 15 mins count of dropped packets in the upstream direction on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.3.1.8 | ColumnadGenGponPonBufferOverflowCurrent15Min | read-only | current | The current 15 mins count of buffer overflow on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.3.1.9 | ColumnadGenGponPonPacketFragErrorCurrent15Min | read-only | current | The current 15 mins count of packet fragmentation error on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.3.1.10 | ColumnadGenGponPonRxEthernetBytesCurrent15Min | read-only | current | The current 15 mins count of received ethernet bytes on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.3.1.11 | ColumnadGenGponPonTxEthernetBytesCurrent15Min | read-only | current | The current 15 mins count of transmitted ethernet bytes on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.3.1.12 | ColumnadGenGponPonUsBwAverageUtilCurrent15Min | read-only | current | The current 15 mins of upstream average bandwidth percent utilization in 100th of a percent on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.3.1.13 | ColumnadGenGponPonUsBwPeakUtilCurrent15Min | read-only | current | The current 15 mins of upstream peak bandwidth percent utilization in 100th of a percent on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.3.1.14 | ColumnadGenGponPonDsBwAverageUtilCurrent15Min | read-only | current | The current 15 mins of downstream average bandwidth percent utilization in 100th of a percent on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.3.1.15 | ColumnadGenGponPonDsBwPeakUtilCurrent15Min | read-only | current | The current 15 mins of downstream peak bandwidth percent utilization in 100th of a percent on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.3.1.16 | ColumnadGenGponPonDsMulticastPacketsCurrent15Min | read-only | current | The current 15 mins count of downstream multicast packets on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.3.1.17 | ColumnadGenGponPonDsMulticastBytesCurrent15Min | read-only | current | The current 15 mins count of downstream multicast bytes on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.3.1.18 | ColumnadGenGponPonDsMulticastBwAverageUtilCurrent15Min | read-only | current | The current 15 mins of downstream multicast average bandwidth percent utilization in 100th of a percent on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.3.1.19 | ColumnadGenGponPonDsMulticastBwPeakUtilCurrent15Min | read-only | current | The current 15 mins of downstream multicast peak bandwidth percent utilization in 100th of a percent on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.3.1.20 | ColumnadGenGponPonDownstreamBIPErrorCurrent15Min | read-only | current | The current 15 mins count of BIP error in the downstream direction on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.4 | TableadGenGponPonCurrent24HrPMTable | not-accessible | current | The GPON PON PM table. Each table entry corresponds to GPON PON interface |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.4.1 | RowadGenGponPonCurrent24HrPMEntry | not-accessible | current | An entry in the GPON PON PM table. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.4.1.2 | ColumnadGenGponPonRxEthernetPacketsCurrent24Hr | read-only | current | The current 24 Hr count of received ethernet packets on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.4.1.3 | ColumnadGenGponPonRxOMCIPacketsCurrent24Hr | read-only | current | The current 24 Hr count of received OMCI packets on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.4.1.4 | ColumnadGenGponPonTxEthernetPacketsCurrent24Hr | read-only | current | The current 24 Hr count of transmitted ethernet packets on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.4.1.5 | ColumnadGenGponPonTxOMCIPacketsCurrent24Hr | read-only | current | The current 24 Hr count of transmitted OMCI packets on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.4.1.6 | ColumnadGenGponPonUpstreamBIPErrorCurrent24Hr | read-only | current | The current 24 Hr count of BIP error in the upstream direction on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.4.1.7 | ColumnadGenGponPonUpstreamDroppedPacketsCurrent24Hr | read-only | current | The current 24 Hr count of dropped packets in the upstream direction on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.4.1.8 | ColumnadGenGponPonBufferOverflowCurrent24Hr | read-only | current | The current 24 Hr count of buffer overflow on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.4.1.9 | ColumnadGenGponPonPacketFragErrorCurrent24Hr | read-only | current | The current 24 Hr count of packet fragmentation error on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.4.1.10 | ColumnadGenGponPonRxEthernetBytesCurrent24Hr | read-only | current | The current 24 Hr count of received ethernet bytes on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.4.1.11 | ColumnadGenGponPonTxEthernetBytesCurrent24Hr | read-only | current | The current 24 Hr count of transmitted ethernet bytes on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.4.1.12 | ColumnadGenGponPonUsBwAverageUtilCurrent24Hr | read-only | current | The current 24 Hr of upstream average bandwidth percent utilization in 100th of a percent on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.4.1.13 | ColumnadGenGponPonUsBwPeakUtilCurrent24Hr | read-only | current | The current 24 Hr of upstream peak bandwidth percent utilization in 100th of a percent on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.4.1.14 | ColumnadGenGponPonDsBwAverageUtilCurrent24Hr | read-only | current | The current 24 Hr of downstream average bandwidth percent utilization in 100th of a percent on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.4.1.15 | ColumnadGenGponPonDsBwPeakUtilCurrent24Hr | read-only | current | The current 24 Hr of downstream peak bandwidth percent utilization in 100th of a percent on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.4.1.16 | ColumnadGenGponPonDsMulticastPacketsCurrent24Hr | read-only | current | The current 24 Hr count of downstream multicast packets on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.4.1.17 | ColumnadGenGponPonDsMulticastBytesCurrent24Hr | read-only | current | The current 24 Hr count of downstream multicast bytes on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.4.1.18 | ColumnadGenGponPonDsMulticastBwAverageUtilCurrent24Hr | read-only | current | The current 24 Hr of downstream multicast average bandwidth percent utilization in 100th of a percent on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.4.1.19 | ColumnadGenGponPonDsMulticastBwPeakUtilCurrent24Hr | read-only | current | The current 24 Hr of downstream multicast peak bandwidth percent utilization in 100th of a percent on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.4.1.20 | ColumnadGenGponPonDownstreamBIPErrorCurrent24Hr | read-only | current | The current 24 Hr count of BIP error in the downstream direction on this PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.5 | TableadGenGponPonPerfResetTable | not-accessible | current | This table contains entries that allow the user to reset the performance history values for each GPON PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.5.1 | RowadGenGponPonPerfResetEntry | not-accessible | current | An entry in the adGenGponPonPerfResetTable. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.5.1.1 | ColumnadGenGponPonPerfReset | read-write | current | Resets the performance history values for all interfaces connected to the selected port. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.6 | TableadGenGponOntVideoReturnPathCountersResetTable | not-accessible | current | This table contains entries that allow the user to reset the counters of RF interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.6.1 | RowadGenGponOntVideoReturnPathCountersResetEntry | not-accessible | current | An entry in the adGenGponOntVideoReturnPathCountersResetTable. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.6.1.1 | ColumnadGenGponOntVideoReturnPathCountersReset | read-write | current | Resets the counters. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.7 | TableadGenGponOntVideoReturnPathCountersTable | not-accessible | current | The Ont Video Return Path Counters table. Each table entry corresponds to RF port counters |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.7.1 | RowadGenGponOntVideoReturnPathCountersEntry | not-accessible | current | An entry in the Ont Video Return Path Counters table. This entry represents a particular RF port counters. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.7.1.1 | ColumnadGenGponOntVideoReturnPathRxTotalBursts | read-only | current | Total number of bursts detected. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.7.1.2 | ColumnadGenGponOntVideoReturnPathRxGoodBursts | read-only | current | Bursts detected and received correctly. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.7.1.3 | ColumnadGenGponOntVideoReturnPathRxFECCorrectedBursts | read-only | current | Bursts detected with errors, but which were successfully corrected using FEC. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.7.1.4 | ColumnadGenGponOntVideoReturnPathRxMissedBursts | read-only | current | Bursts detected that were not received correctly. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.7.1.5 | ColumnadGenGponOntVideoReturnPathRxMinPower | read-only | current | Lowest power level of all bursts received(unit dBmV). |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.7.1.6 | ColumnadGenGponOntVideoReturnPathRxMaxPower | read-only | current | Highest power level of all bursts received(unit dBmV). |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.7.1.7 | ColumnadGenGponOntVideoReturnPathRxCurrentPower | read-only | current | Power level of the last burst received(unit dBmV). |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.7.1.8 | ColumnadGenGponOntVideoReturnPathRxFECCorrectedSymbols | read-only | current | Numbers of symbols that were correctedthrough the use of FEC. It provides an indicator of the bit error rate of the link. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.8 | TableadGenGponPonCounterResetTable | not-accessible | current | This table contains entries that allow the user to reset the rolling counter values for each GPON PON interface. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.8.1 | RowadGenGponPonCounterResetEntry | not-accessible | current | An entry in the adGenGponPonCounterResetTable. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.4.8.1.1 | ColumnadGenGponPonBIPCountersReset | read-write | current | Resets both upstream and downstream BIP error counter values on all ONTs connected to the selected PON port. |
| 1.3.6.1.4.1.664.6.10000.76.1.1.5 | NodeadGponAlarms | |||
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.1 | NodeadGponOntAlarmEventsPrefix | |||
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0 | NodeadGponOntAlarmEvents | |||
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.1 | NotificationadGenGponOntClrLOSAlarm | current | This trap indicates that LOS alarm mode has cleared. | |
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.2 | NotificationadGenGponOntSetLOSAlarm | current | This trap indicates that LOS alarm mode has set. | |
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.3 | NotificationadGenGponOntClrEquipmentAlarm | current | This trap indicates that ONT Equipment alarm mode has cleared. | |
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.4 | NotificationadGenGponOntSetEquipmentAlarm | current | This trap indicates that ONT Equipment alarm mode has set. | |
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.5 | NotificationadGenGponOntClrPoweringAlarm | current | This trap indicates that ONT Powering alarm mode has cleared. | |
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.6 | NotificationadGenGponOntSetPoweringAlarm | current | This trap indicates that ONT Powering alarm mode has set. | |
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.7 | NotificationadGenGponOntClrBatteryMissingAlarm | current | This trap indicates that ONT Battery Missing alarm mode has cleared. | |
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.8 | NotificationadGenGponOntSetBatteryMissingAlarm | current | This trap indicates that ONT Battery Missing alarm mode has set. | |
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.9 | NotificationadGenGponOntClrBatteryFailureAlarm | current | This trap indicates that ONT Battery Failure alarm mode has cleared. | |
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.10 | NotificationadGenGponOntSetBatteryFailureAlarm | current | This trap indicates that ONT Battery Failure alarm mode has set. | |
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.11 | NotificationadGenGponOntClrBatteryLowAlarm | current | This trap indicates that ONT Battery Low alarm mode has cleared. | |
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.12 | NotificationadGenGponOntSetBatteryLowAlarm | current | This trap indicates that ONT Battery Low alarm mode has set. | |
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.13 | NotificationadGenGponOntClrPhyIntrustionAlarm | current | This trap indicates that ONT Physical Intrustion alarm mode has cleared. | |
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.14 | NotificationadGenGponOntSetPhyIntrusionAlarm | current | This trap indicates that ONT Physical Intrusion alarm mode has set. | |
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.15 | NotificationadGenGponOntDiscoveryAlarm | current | The OLT has discovered a new ONT that has not been activated yet. | |
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.16 | NotificationadGenGponOntActivationAlarm | current | The OLT has activated a new ONT which should be discovered by the management system. | |
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.18 | NotificationadGenGponConfigServerAlarmClear | current | The config server alarm has cleared. | |
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.19 | NotificationadGenGponConfigServerAlarmSet | current | The ONT encountered a problem communicating with the config file servers. | |
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.20 | NotificationadGenGponConfigFileAlarmClear | current | The config file alarm has cleared. | |
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.21 | NotificationadGenGponConfigFileAlarmSet | current | The ONT encountered an error processing the configuration file. | |
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.22 | NotificationadGenGponConfigChecksumMismatchAlarmClear | current | The config checksum mismatch alarm has cleared. | |
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.23 | NotificationadGenGponConfigChecksumMismatchAlarmSet | current | The configuration file checksum has been changed locally on the ONT. | |
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.24 | NotificationadGenGponOntOMCICommFailAlarmClear | current | This trap indicates that ONT successfully established the OMCI communication after the previous failure condition. | |
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.25 | NotificationadGenGponOntOMCICommFailAlarmSet | current | This trap indicates that OMCI communication with an ONT failed to be established or has become inoperable. | |
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.26 | NotificationadGenGponCirOversubscribedAlarmClear | current | This trap indicates clearing of PON CIR bandwidth oversubscribed condition. | |
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.27 | NotificationadGenGponCirOversubscribedAlarmSet | current | This trap indicates that PON CIR bandwidth is oversubscribed. Any further ONU activation might fail. | |
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.28 | NotificationadGenGponPonLosAlarmClear | current | User can provision a threshold limit on percentage of ONTs that are activated once and are now in LOS condition which will trigger the active alarm condition. … | |
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.29 | NotificationadGenGponPonLosAlarmSet | current | The percentage of ONTs activated once on a single PON in LOS condition that exceeds a provisioned threshold level. | |
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.30 | NotificationadGenGponMulticastBwThresholdAlarmClear | current | This trap indicates the multicast bandwidth used is less than the multicast bandwidth threshold value provisioned on the PON. | |
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.31 | NotificationadGenGponMulticastBwThresholdAlarmSet | current | This trap indicates the multicast bandwidth used is equal to or greater than the multicast bandwidth threshold value provisioned on the PON. | |
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.32 | NotificationadGenGponPonDiscoveredInvalidSNAlarm | current | This trap indicates that an ONT has an invalid serial number during ONT discovery procedure. | |
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.33 | NotificationadGenGponOntInvalidSNAlarm | current | This trap indicates that an activated ONT reports an invalid serial number. | |
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.34 | NotificationadGenGponOntUpstreamBipTcaAlarmClear | current | This trap indicates the ONT upstream BIP error rate remains less than the BIP error threshold 10^-(n+1) for 1000 seconds, n is the BIP TCA Threshold value prov… | |
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.35 | NotificationadGenGponOntUpstreamBipTcaAlarmSet | current | This trap indicates the ONT upstream BIP error rate is greater than or equal to the BIP threshold 10^-n, n is the BIP TCA threshold value provisioned on the OL… | |
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.36 | NotificationadGenGponOntDownstreamBipTcaAlarmClear | current | This trap indicates the ONT downstream BIP error rate remains less than the BIP threshold value 10^-(n+1) for 1000 seconds, n is the BIP TCA threshold value pr… | |
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.37 | NotificationadGenGponOntDownstreamBipTcaAlarmSet | current | This trap indicates the ONT downstream BIP error rate is greater than or equal to the BIP threshold value 10^-n, n is the BIP TCA threshold value provisioned o… | |
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.38 | NotificationadGenGponOntDyingGaspAlarm | current | This trap indicates that ONT is powering off imminently. | |
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.39 | NotificationadGenGponPonFailoverAlarmClear | current | This trap indicates that a PON failover condition has been cleared. | |
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.40 | NotificationadGenGponPonFailoverAlarmActive | current | This trap indicates that a PON failover condition is active. | |
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.41 | NotificationadGenGponPonHwFailureAlarmClear | current | This trap indicates that PON Hardware Failure alarm has cleared. | |
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.42 | NotificationadGenGponPonHwFailureAlarmSet | current | This trap indicates that PON Hardware Failure alarm has set | |
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.43 | NotificationadGenGponPonDegradationAlarmClear | current | This trap indicates that PON Degredation alarm has cleared | |
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.44 | NotificationadGenGponPonDegradationAlarmSet | current | This trap indicates that PON Degredation alarm has set | |
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.45 | NotificationadGenGponOntClrDyingGaspAlarm | current | This trap indicates that ONT Dying Gasp alarm has cleared. | |
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.1.0.46 | NotificationadGenGponOntSetDyingGaspAlarm | current | This trap indicates that ONT is powering off imminently. | |
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.2 | NodeadGponOntPortAlarmEventsPrefix | |||
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.2.0 | NodeadGponOntPortAlarmEvents | |||
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.2.0.1 | NotificationadGenGponOntClrLanLOSAlarm | current | This trap indicates that GPON ONT ethernet port Lan LOS alarm mode has cleared. | |
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.2.0.2 | NotificationadGenGponOntPortSetLanLOSAlarm | current | This trap indicates that GPON ONT ethernet port Lan LOS alarm mode has set. | |
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.2.0.3 | NotificationadGenGponOntVideoPortLOSAlarmClear | current | This trap indicates that GPON ONT video port LOS alarm mode has cleared. | |
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.2.0.4 | NotificationadGenGponOntVideoPortLOSAlarmSet | current | This trap indicates that GPON ONT video port LOS alarm mode has set. | |
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.2.0.5 | NotificationadGenGponOntVideoPortOORLowAlarmClear | current | This trap indicates that GPON ONT video port OOR Low alarm mode has cleared. | |
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.2.0.6 | NotificationadGenGponOntVideoPortOORLowAlarmSet | current | This trap indicates that GPON ONT video port OOR Low alarm mode has set. | |
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.2.0.7 | NotificationadGenGponOntVideoPortOORHighAlarmClear | current | This trap indicates that GPON ONT video port OOR High alarm mode has cleared. | |
| 1.3.6.1.4.1.664.6.10000.76.1.1.5.2.0.8 | NotificationadGenGponOntVideoPortOORHighAlarmSet | current | This trap indicates that GPON ONT video port OOR High alarm mode has set. | |
| 1.3.6.1.4.1.664.6.10000.76.1.1.6 | NodeadGponTests | |||
| 1.3.6.1.4.1.664.6.10000.76.1.1.6.1 | NodeadGponOntTest | |||
| 1.3.6.1.4.1.664.6.10000.76.1.1.6.1.1 | ScalaradGenGponOntReset | read-write | current | Setting this OID deactivate or reboot the ONT. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AdGenGponActivationMode | INTEGER { manual (1), autodiscovery (2), autoactivate (3), registrationid (4), registrationUnlock (5) } | current | Indicates the ONT activation mode used in PON interface |
| AdGenGponConfigFileInterface | INTEGER { voipIpHost (0), managementIpHost (1) } | current | Indicates the interface used to transfer a config file to the ONT. |
| AdGenGponConfigFileRetrievalMethod | INTEGER { none (0), tftp (1), http (2), tr69 (3) } | current | Indicates the protocol used for retrieving a configuration file. |
| AdGenGponConfigFileState | INTEGER { inactive (0), active (1), initializing (2), fault (3) } | current | Indicates the state of the configuration file being processed by the ONT. |
| AdGenGponEnableDisableValue | INTEGER { enable (1), disable (2) } | current | Indicates enumeration value of the enable/disable |
| AdGenGponMulticastCacStatus | INTEGER { admitting (1), rejecting (2), disabled (3) } | current | Indicates the multicast CAC status on the PON: admitting: IGMP join message would not be rejected due to CAC; rejecting: New IGMP group join message would be rejected due to CAC; disabled: Multicast CAC and MulticastBwT… |
| AdGenGponOntAdminState | INTEGER { inService (1), outOfSeriveUAS (2), outOfServiceMA (3) } | current | Indicates the admin state of the GPON interface. |
| AdGenGponOntOperState | INTEGER { init (0), discovering (1), discovered (2), rejected (3), up (4), down (5) } | current | Indicates the operational state of the GPON ont. |
| AdGenGponOntPortAutoDetectMode | INTEGER { autoAuto (0), tenFull (1), hundredFull (2), thousandFull (3), autoFull (4), tenGigabitFull (5), twentyFiveHundredFull (6), fiveGigabitFull (7), tenHalf (17), hundredHalf (18), thousandHalf (19) } | deprecated | Indicates auto detection configuration of ONT Ethernet interface. |
| AdGenGponOntPortOperState | INTEGER { up (1), down (2), test(3) } | current | Indicates the operational state of the GPON ont ports. |
| AdGenGponOntVideoPortReturnPathMode | INTEGER { scte-1 (0), scte-2-256 (1), scte-2-1544 (2), scte-2-3088 (3), rf-sample (245) } | current | Video return path mode: scte-1: Mode 1, 256 kbit/s data rate, 62 byte PDUs, preceded by the unique word 0xCCCCCC00; scte-2-256: Mode 2, 256 kbit/s data rate, 59 byte PDUs, preceded by the unique word 0xCCCCCC0D; scte-2-… |
| AdGenGponResourceAllocationMode | INTEGER { mode6416 (1), mode3232 (2) } | current | Indicates the resource allocation mode used in PON interface: mode6416: Maximum of 64 ONTs, 16 services per ONT; mode3232: Maximum of 32 ONTs, 32 services per ONT; |
| AdGenGponTrueFalseValue | INTEGER { false (0), true (1) } | current | Indicates enumeration value of the true/false |
| AdGenGponYesNoValue | INTEGER { yes (1), no (2) } | current | Indicates enumeration value of the yes/no |