ADTRAN-GENTSCAN-MIB
74 objects
This MIB defines the objects for the TSCAN MIB.
Imported Objects
| ADTRAN-GENHDSL-MIB | adGenHDSL adGenHDSLID |
| ADTRAN-SHDSL-MIB MISSING | adEShdslInvIndex |
| IF-MIB | ifIndex |
| SNMPv2-CONF | OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.664.5.51.1 | NodeadGenTSCANmg | |||
| 1.3.6.1.4.1.664.5.51.1.1 | NodeadGenTSCANProv | |||
| 1.3.6.1.4.1.664.5.51.1.1.1 | TableadGenTSCANProvTable | not-accessible | current | The TSCAN Prov table. |
| 1.3.6.1.4.1.664.5.51.1.1.1.1 | RowadGenTSCANProvEntry | not-accessible | current | An entry in the TSCAN Provisioning table. |
| 1.3.6.1.4.1.664.5.51.1.1.1.1.1 | ColumnadGenTSCANAccumTscanData | read-write | current | Starts the accumulation of the TSCAN data. Always returns 1 on get. |
| 1.3.6.1.4.1.664.5.51.1.1.1.1.2 | ColumnadGenTSCANTscanDataStatus | read-only | current | Status of the TSCAN data accumulation process. |
| 1.3.6.1.4.1.664.5.51.1.1.1.1.3 | ColumnadGenTSCANECTG1B1 | read-only | current | Block of TG information for L1 |
| 1.3.6.1.4.1.664.5.51.1.1.1.1.4 | ColumnadGenTSCANECTG1B2 | read-only | current | Block of TG information for L1 |
| 1.3.6.1.4.1.664.5.51.1.1.1.1.5 | ColumnadGenTSCANECTG1B3 | read-only | current | Block of TG information for L1 |
| 1.3.6.1.4.1.664.5.51.1.1.1.1.6 | ColumnadGenTSCANECTG1B4 | read-only | current | Block of TG information for L1 |
| 1.3.6.1.4.1.664.5.51.1.1.1.1.7 | ColumnadGenTSCANECTG1B5 | read-only | current | Block of TG information for L1 |
| 1.3.6.1.4.1.664.5.51.1.1.1.1.8 | ColumnadGenTSCANECTG1B6 | read-only | current | Block of TG information for L1 |
| 1.3.6.1.4.1.664.5.51.1.1.1.1.9 | ColumnadGenTSCANECTG1B7 | read-only | current | Block of TG information for L1 |
| 1.3.6.1.4.1.664.5.51.1.1.1.1.10 | ColumnadGenTSCANECTG1B8 | read-only | current | Block of TG information for L1 |
| 1.3.6.1.4.1.664.5.51.1.1.1.1.11 | ColumnadGenTSCANECTG1B9 | read-only | current | Block of TG information for L1 |
| 1.3.6.1.4.1.664.5.51.1.1.1.1.12 | ColumnadGenTSCANECTG2B1 | read-only | current | Block of TG information for L2 |
| 1.3.6.1.4.1.664.5.51.1.1.1.1.13 | ColumnadGenTSCANECTG2B2 | read-only | current | Block of TG information for L2 |
| 1.3.6.1.4.1.664.5.51.1.1.1.1.14 | ColumnadGenTSCANECTG2B3 | read-only | current | Block of TG information for L2 |
| 1.3.6.1.4.1.664.5.51.1.1.1.1.15 | ColumnadGenTSCANECTG2B4 | read-only | current | Block of TG information for L2 |
| 1.3.6.1.4.1.664.5.51.1.1.1.1.16 | ColumnadGenTSCANECTG2B5 | read-only | current | Block of TG information for L2 |
| 1.3.6.1.4.1.664.5.51.1.1.1.1.17 | ColumnadGenTSCANECTG2B6 | read-only | current | Block of TG information for L2 |
| 1.3.6.1.4.1.664.5.51.1.1.1.1.18 | ColumnadGenTSCANECTG2B7 | read-only | current | Block of TG information for L2 |
| 1.3.6.1.4.1.664.5.51.1.1.1.1.19 | ColumnadGenTSCANECTG2B8 | read-only | current | Block of TG information for L2 |
| 1.3.6.1.4.1.664.5.51.1.1.1.1.20 | ColumnadGenTSCANECTG2B9 | read-only | current | Block of TG information for L2 |
| 1.3.6.1.4.1.664.5.51.1.1.1.1.21 | ColumnadGenTSCANECTB1B1 | read-only | current | Block of TB information for L1 |
| 1.3.6.1.4.1.664.5.51.1.1.1.1.22 | ColumnadGenTSCANECTB1B2 | read-only | current | Block of TB information for L1 |
| 1.3.6.1.4.1.664.5.51.1.1.1.1.23 | ColumnadGenTSCANECTB1B3 | read-only | current | Block of TB information for L1 |
| 1.3.6.1.4.1.664.5.51.1.1.1.1.24 | ColumnadGenTSCANECTB1B4 | read-only | current | Block of TB information for L1 |
| 1.3.6.1.4.1.664.5.51.1.1.1.1.25 | ColumnadGenTSCANECTB1B5 | read-only | current | Block of TB information for L1 |
| 1.3.6.1.4.1.664.5.51.1.1.1.1.26 | ColumnadGenTSCANECTB1B6 | read-only | current | Block of TB information for L1 |
| 1.3.6.1.4.1.664.5.51.1.1.1.1.27 | ColumnadGenTSCANECTB1B7 | read-only | current | Block of TB information for L1 |
| 1.3.6.1.4.1.664.5.51.1.1.1.1.28 | ColumnadGenTSCANECTB1B8 | read-only | current | Block of TB information for L1 |
| 1.3.6.1.4.1.664.5.51.1.1.1.1.29 | ColumnadGenTSCANECTB1B9 | read-only | current | Block of TB information for L1 |
| 1.3.6.1.4.1.664.5.51.1.1.1.1.30 | ColumnadGenTSCANECTB2B1 | read-only | current | Block of TB information for L2 |
| 1.3.6.1.4.1.664.5.51.1.1.1.1.31 | ColumnadGenTSCANECTB2B2 | read-only | current | Block of TB information for L2 |
| 1.3.6.1.4.1.664.5.51.1.1.1.1.32 | ColumnadGenTSCANECTB2B3 | read-only | current | Block of TB information for L2 |
| 1.3.6.1.4.1.664.5.51.1.1.1.1.33 | ColumnadGenTSCANECTB2B4 | read-only | current | Block of TB information for L2 |
| 1.3.6.1.4.1.664.5.51.1.1.1.1.34 | ColumnadGenTSCANECTB2B5 | read-only | current | Block of TB information for L2 |
| 1.3.6.1.4.1.664.5.51.1.1.1.1.35 | ColumnadGenTSCANECTB2B6 | read-only | current | Block of TB information for L2 |
| 1.3.6.1.4.1.664.5.51.1.1.1.1.36 | ColumnadGenTSCANECTB2B7 | read-only | current | Block of TB information for L2 |
| 1.3.6.1.4.1.664.5.51.1.1.1.1.37 | ColumnadGenTSCANECTB2B8 | read-only | current | Block of TB information for L2 |
| 1.3.6.1.4.1.664.5.51.1.1.1.1.38 | ColumnadGenTSCANECTB2B9 | read-only | current | Block of TB information for L2 |
| 1.3.6.1.4.1.664.5.51.1.1.1.1.39 | ColumnadGenTSCANST1B | read-only | current | ST information for L1 |
| 1.3.6.1.4.1.664.5.51.1.1.1.1.40 | ColumnadGenTSCANST2B | read-only | current | ST information for L2 |
| 1.3.6.1.4.1.664.5.51.1.1.1.1.41 | ColumnadGenTSCANLS1 | read-only | current | Status of current TSCAN data on L1. |
| 1.3.6.1.4.1.664.5.51.1.1.1.1.42 | ColumnadGenTSCANLS2 | read-only | current | Status of current TSCAN data on L2. |
| 1.3.6.1.4.1.664.5.51.1.1.1.1.43 | ColumnadGenTSCANRate | read-write | current | Provisions the rate that TSCAN will run. Currently, this applies to SHDSL only. The default is 32. |
| 1.3.6.1.4.1.664.5.51.1.1.1.1.44 | ColumnadGenTSCANLastTime | read-only | current | Timestamp of last valid results for TScan. |
| 1.3.6.1.4.1.664.5.51.1.1.1.1.45 | ColumnadGenTSCANRepeaterIndex | read-write | current | Provisions the HTUC or repeater that operation will be performed on. Only valid for hdsl4. |
| 1.3.6.1.4.1.664.5.51.1.1.1.1.46 | ColumnadGenTSCANECTB1B10 | read-only | current | Block of TB information for L1 |
| 1.3.6.1.4.1.664.5.51.1.1.1.1.47 | ColumnadGenTSCANECTB1B11 | read-only | current | Block of TB information for L1 |
| 1.3.6.1.4.1.664.5.51.1.1.1.1.48 | ColumnadGenTSCANECTB1B12 | read-only | current | Block of TB information for L1 |
| 1.3.6.1.4.1.664.5.51.1.1.1.1.49 | ColumnadGenTSCANECTB2B10 | read-only | current | Block of TB information for L2 |
| 1.3.6.1.4.1.664.5.51.1.1.1.1.50 | ColumnadGenTSCANECTB2B11 | read-only | current | Block of TB information for L2 |
| 1.3.6.1.4.1.664.5.51.1.1.1.1.51 | ColumnadGenTSCANECTB2B12 | read-only | current | Block of TB information for L2 |
| 1.3.6.1.4.1.664.5.51.1.1.1.1.52 | ColumnadGenTSCANHybridConfig | read-write | current | Enabled connects the hybrid during TSCAN, disabled disconnects the hybrid during TSCAN. |
| 1.3.6.1.4.1.664.5.51.1.1.1.1.53 | ColumnadGenTSCANFullRangeRate | read-write | current | Provisions the rate in DS0s that TSCAN will run. Currently, this applies to SHDSL only. The default is 32. Allows any valid rate to be set. |
| 1.3.6.1.4.1.664.5.51.1.2 | NodeadGenTSCANMibConformance | |||
| 1.3.6.1.4.1.664.5.51.1.2.1 | NodeadGenTSCANMibGroups | |||
| 1.3.6.1.4.1.664.5.51.1.2.1.1 | GroupadGenTSCANGroup | current | These objects provide support for TSCAN. | |
| 1.3.6.1.4.1.664.5.51.1.3 | NodeadGenTSCANRepeater | |||
| 1.3.6.1.4.1.664.5.51.1.3.1 | TableadGenTSCANRepeaterTable | not-accessible | current | The TSCAN Repeater table. |
| 1.3.6.1.4.1.664.5.51.1.3.1.1 | RowadGenTSCANRepeaterEntry | not-accessible | current | An entry in the TSCAN Repeater table. This table is used to initiate and report results on repeaters in the circuit. Currently, this is only for use with SHDSL… |
| 1.3.6.1.4.1.664.5.51.1.3.1.1.1 | ColumnadGenTSCANRepeaterStart | read-write | current | Starts the accumulation of the TSCAN data. Always returns 1 on get. |
| 1.3.6.1.4.1.664.5.51.1.3.1.1.2 | ColumnadGenTSCANRepeaterStatus | read-only | current | Returns the TSCAN status of the selected repeater. |
| 1.3.6.1.4.1.664.5.51.1.3.1.1.3 | ColumnadGenTSCANRepeaterLastTestCompleted | read-only | current | Returns the date/time of the last test ran in a MM/DD/YYYY HH:MM:SS format. |
| 1.3.6.1.4.1.664.5.51.1.3.1.1.4 | ColumnadGenTSCANRepeaterFault | read-only | current | Returns the fault found during the last test. |
| 1.3.6.1.4.1.664.5.51.1.3.1.1.5 | ColumnadGenTSCANRepeaterDistanceInFeet | read-only | current | Returns the distance, in feet, of the fault found in the last test. |
| 1.3.6.1.4.1.664.5.51.1.3.1.1.6 | ColumnadGenTSCANRepeaterDistanceInMeters | read-only | current | Returns the distance, in meters, of the fault found in the last test. |
| 1.3.6.1.4.1.664.5.51.1.3.1.1.7 | ColumnadGenTSCANRepeaterRate | read-only | current | Returns the SHDSL training rate, in DS0s, used in the last test. |
| 1.3.6.1.4.1.664.5.51.1.3.2 | TableadGenTSCANRepeaterPortTable | not-accessible | current | The TSCAN Repeater Port table. |
| 1.3.6.1.4.1.664.5.51.1.3.2.1 | RowadGenTSCANRepeaterPortEntry | not-accessible | current | An entry in the TSCAN Repeater Port table. This table is used to control and/or report port level information related to running TSCAN on a repeater. |
| 1.3.6.1.4.1.664.5.51.1.3.2.1.1 | ColumnadGenTSCANRepeaterPortLastErrorString | read-write | current | Returns the last error encountered when attempting to initiate a TSCAN test on a repeater. |
| 1.3.6.1.4.1.664.6.10000.51.1.1 | IdentityadGenTSCANMIB | This MIB defines the objects for the TSCAN MIB. |