ADTRAN-TA5K-REDUNDANCY-MIB
50 objects
Total Access 5000 Redundancy MIB
Imported Objects
| ADTRAN-GENSLOT-MIB | adGenSlotInfoIndex |
| ADTRAN-GENTA5K-MIB | adGenTa5kRedundancy adGenTa5kRedundancyID |
| ADTRAN-GENTRAPINFORM-MIB | adTrapInformSeqNum |
| ADTRAN-MIB | adIdentity adIdentityShared adMgmt adProducts |
| IANAifType-MIB | -- IANAifType -- |
| IF-MIB | -- InterfaceIndex ifIndex -- InterfaceIndexOrZero |
| SNMP-FRAMEWORK-MIB | -- SnmpAdminString -- |
| SNMPv2-MIB | sysName |
| SNMPv2-SMI | -- Counter64 -- Gauge32 -- TimeTicks -- Unsigned32 Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE |
| SNMPv2-TC | -- TimeInterval DisplayString MacAddress RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.664.5.67.1.1.1 | NodeadTa5kEquipmentRedundancy | |||
| 1.3.6.1.4.1.664.5.67.1.1.1.1 | TableadTa5kEquipmentRedundancyTable | not-accessible | current | ... |
| 1.3.6.1.4.1.664.5.67.1.1.1.1.1 | RowadTa5kEquipmentRedundancyEntry | not-accessible | current | ... |
| 1.3.6.1.4.1.664.5.67.1.1.1.1.1.1 | ColumnadTa5kEquipmentRedundancySupported | read-only | current | Supported means this unit will be able to failover to a standby card. if it is not true, the value returns a reason why the unit cannot failover. Valid for the… |
| 1.3.6.1.4.1.664.5.67.1.1.1.1.1.2 | ColumnadTa5kEquipmentRedundancyRevertive | read-write | current | Enable or disable the property of a protected unit reverting back to the original operating unit when the original unit's health has returned to normal operati… |
| 1.3.6.1.4.1.664.5.67.1.1.1.1.1.3 | ColumnadTa5kEquipmentRedundancyRevertiveTimeout | read-write | current | Time in seconds to wait before allowing a protection switch to revert back to the primary unit. Valid for the active unit only. |
| 1.3.6.1.4.1.664.5.67.1.1.1.1.1.4 | ColumnadTa5kEquipmentRedundancyForceFailover | read-write | current | Setting this to failover(1) will swap the active and standby status of the redundant modules. Valid for the active unit only. |
| 1.3.6.1.4.1.664.5.67.1.1.1.1.1.5 | ColumnadTa5kEquipmentRedundancyState | read-only | current | Equipment Redundancy State. StandbyNotReady means the unit is the standby, but cannot accept a failover should one occur. This case occurs when the standby is … |
| 1.3.6.1.4.1.664.5.67.1.1.1.1.1.6 | ColumnadTa5kEquipmentRedundancyPeerSlot | read-only | current | The Slot number of the peer. |
| 1.3.6.1.4.1.664.5.67.1.1.1.1.1.7 | ColumnadTa5kEquipmentRedundancyFeatureEnabled | read-write | current | Enabled if the card is provisioned to operate rendundantly if possible. Disabled if the card if provisioned for non-redundant operation only. |
| 1.3.6.1.4.1.664.5.67.1.1.1.1.1.8 | ColumnadTa5kEquipmentRedundancyFacilityType | read-write | current | Shared Facilities: redundant modules share a physical cable/fiber ('y-cable') Dual Facilities: redundant modules have independent redundant cable/fiber facilit… |
| 1.3.6.1.4.1.664.5.67.1.1.1.1.1.9 | ColumnadTa5kEquipmentRedundancyStandbyReasonsCount | read-only | current | Returns a count of the number of rows in the StandbyNotReadyReasonsTable. |
| 1.3.6.1.4.1.664.5.67.1.1.1.3 | TableadTa5kStandbyNotReadyReasonsTable | not-accessible | current | This table lists the reasons why a module is in the StandbyNotReady state |
| 1.3.6.1.4.1.664.5.67.1.1.1.3.1 | RowadTa5kStandbyNotReadyReasonEntry | not-accessible | current | An entry in the StandbyNotReadyReasonsTable |
| 1.3.6.1.4.1.664.5.67.1.1.1.3.1.1 | ColumnadTa5kStandbyNotReadyReasonIndex | not-accessible | current | A unique index for each StandbyNotReady reason. Values range from 1 to adTa5kEquipmentRedundancyStandbyReasonsCount |
| 1.3.6.1.4.1.664.5.67.1.1.1.3.1.2 | ColumnadTa5kStandbyNotReadyReason | read-only | current | Returns the reason for the StandbyNotReady state. |
| 1.3.6.1.4.1.664.5.67.1.1.2 | NodeadTa5kFacilityRedundancy | |||
| 1.3.6.1.4.1.664.5.67.1.1.2.1 | TableadTa5kFacilityRedundancyTable | not-accessible | current | This table is valid for the active unit only. |
| 1.3.6.1.4.1.664.5.67.1.1.2.1.1 | RowadTa5kFacilityRedundancyEntry | not-accessible | current | ... |
| 1.3.6.1.4.1.664.5.67.1.1.2.1.1.1 | ColumnadTa5kFacilityRedundancySupported | read-only | current | |
| 1.3.6.1.4.1.664.5.67.1.1.2.1.1.2 | ColumnadTa5kFacilityRedundancyState | read-only | current | |
| 1.3.6.1.4.1.664.5.67.1.1.2.1.1.3 | ColumnadTa5kFacilityRedundancyForceProtect | read-only | current | |
| 1.3.6.1.4.1.664.5.67.1.1.2.1.1.4 | ColumnadTa5kFacilityRedundancyProtectedByIfIndex | read-only | current | |
| 1.3.6.1.4.1.664.5.67.1.1.3 | NodeadTa5kRedundancyAlarmPrefix | |||
| 1.3.6.1.4.1.664.5.67.1.1.3.0 | NodeadTa5kRedundancyAlarms | |||
| 1.3.6.1.4.1.664.5.67.1.1.3.0.1 | NotificationadTa5kRedundancyCardActive | current | Indicates that the standby card in redundant pair has become the active module. | |
| 1.3.6.1.4.1.664.5.67.1.1.3.0.2 | NotificationadTa5kRedundancyProtectionAvailable | current | Redundancy protection is available for this slot. | |
| 1.3.6.1.4.1.664.5.67.1.1.3.0.3 | NotificationadTa5kRedundancyProtectionUnavailable | current | Redundancy protection is not available for this slot. | |
| 1.3.6.1.4.1.664.5.67.1.1.3.0.4 | NotificationadTa5kRedundancyPeerCodeVersionMismatchClear | current | Indicates that the Active module code version mismatch with its peer has cleared. | |
| 1.3.6.1.4.1.664.5.67.1.1.3.0.5 | NotificationadTa5kRedundancyPeerCodeVersionMismatch | current | Indicates that the Active module code version does not match with its peer. | |
| 1.3.6.1.4.1.664.5.67.1.1.3.0.6 | NotificationadTa5kRedundancyPeerDatabaseMirroringInSync | current | Indicates that the xM's peer database mirroring is in sync. | |
| 1.3.6.1.4.1.664.5.67.1.1.3.0.7 | NotificationadTa5kRedundancyPeerDbMirroringSyncInProgress | current | Indicates that the peer database mirroring sync is in progress on the xM. | |
| 1.3.6.1.4.1.664.5.67.1.1.3.0.8 | NotificationadTa5kRedundancyPeerRemoteDatabaseSyncInProgress | current | Indicates that the peer remote database sync is in progress on the SM. | |
| 1.3.6.1.4.1.664.5.67.1.1.3.0.9 | NotificationadTa5kRedundancyPeerRemoteDatabaseInSync | current | Indicates that the xM's remote database is in sync. | |
| 1.3.6.1.4.1.664.5.67.1.1.3.0.10 | NotificationadTa5kRedundancyManualSwitch | current | Indicates that the user has initiated a manual protection switch. | |
| 1.3.6.1.4.1.664.5.67.1.1.3.0.12 | NotificationadTa5kEquipmentRedundancySwitchToProtectClear | current | This alarm indicates that the 'working' module has now become active. This alarm is only generated when revertive mode is enabled. The 'working' module is alwa… | |
| 1.3.6.1.4.1.664.5.67.1.1.3.0.13 | NotificationadTa5kEquipmentRedundancySwitchToProtect | current | This alarm indicates that the 'working' module has failed and the 'protect' module is now active. This alarm is only generated when revertive mode is enabled. … | |
| 1.3.6.1.4.1.664.5.67.1.1.3.0.14 | NotificationadTa5kRedundancyAutomaticSwitch | current | Indicates that the equipment initiated an automatic protection switch. | |
| 1.3.6.1.4.1.664.5.67.1.1.4 | NodeadTa5kRedundancyAlarmProv | |||
| 1.3.6.1.4.1.664.5.67.1.1.4.1 | TableadTa5kRedundancyAlarmProvTable | not-accessible | current | ... |
| 1.3.6.1.4.1.664.5.67.1.1.4.1.1 | RowadTa5kRedundancyAlarmProvEntry | not-accessible | current | ... |
| 1.3.6.1.4.1.664.5.67.1.1.4.1.1.1 | ColumnadTa5kRedundancyAlarmProvCardActiveEnable | read-write | current | True - alarm is enabled |
| 1.3.6.1.4.1.664.5.67.1.1.4.1.1.2 | ColumnadTa5kRedundancyAlarmProvProtectionUnavailableEnable | read-write | current | True - alarm is enabled |
| 1.3.6.1.4.1.664.5.67.1.1.4.1.1.3 | ColumnadTa5kRedundancyAlarmProvPeerCodeVersionMismatchEnable | read-write | current | True - alarm is enabled |
| 1.3.6.1.4.1.664.5.67.1.1.4.1.1.4 | ColumnadTa5kRedundancyAlarmProvPeerDbMirroringSyncInProgressEnable | read-write | current | True - alarm is enabled |
| 1.3.6.1.4.1.664.5.67.1.1.4.1.1.5 | ColumnadTa5kRedundancyAlarmProvPeerRemoteDatabaseSyncInProgressEnable | read-write | current | True - alarm is enabled |
| 1.3.6.1.4.1.664.5.67.1.1.4.1.1.6 | ColumnadTa5kRedundancyAlarmProvManualSwitchEnable | read-write | current | True - alarm is enabled |
| 1.3.6.1.4.1.664.5.67.1.1.4.1.1.7 | ColumnadTa5kRedundancyAlarmProvSwitchToProtectEnable | read-write | current | True - alarm is enabled |
| 1.3.6.1.4.1.664.5.67.1.1.4.1.1.8 | ColumnadTa5kRedundancyAlarmProvAutomaticSwitchEnable | read-write | current | True - alarm is enabled |
| 1.3.6.1.4.1.664.6.10000.67.1.1.1 | IdentityadTa5kRedundancyModuleIdentity | Total Access 5000 Redundancy MIB |