ADTRAN-TAMINIDSLAM3G-MIB
131 objects
This is the MIB module that describes Total Access Mini-DSLAM SMIv2 objects.
Imported Objects
| ADTRAN-GENMINIDSLAM-MIB | adTAMiniDslam3gID |
| ADTRAN-GENSLOT-MIB | adGenSlotInfoIndex |
| IF-MIB | ifIndex |
| INET-ADDRESS-MIB | InetAddress InetAddressPrefixLength InetAddressType |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.664.6.10000.61.5.1 | IdentityadGenMiniDslam3g | This is the MIB module that describes Total Access Mini-DSLAM SMIv2 objects. | ||
| 1.3.6.1.4.1.664.6.10000.61.5.1.1 | NodeadGenMiniDslam3gMib | |||
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.1 | TableadGenMiniDslam3gInfoTable | not-accessible | current | This table contains all objects for provisioning the DSLAM at the shelf level. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.1.1 | RowadGenMiniDslam3gInfoEntry | not-accessible | current | An entry in the adGenMiniDslamShelfInfoTable. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.1.1.1 | ColumnadGenMiniDslam3gInfoUserTempThresh | read-write | current | User temperature threshold in degrees celcius. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.1.1.2 | ColumnadGenMiniDslam3gInfoUserTempTrapEnable | read-write | current | Used to enable or disable the adGenMiniDslamShelfUserTempActive trap. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.1.1.3 | ColumnadGenMiniDslam3gInfoDspWarmStartEnable | read-write | current | Used to enable or disable the DSP warm start function. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.1.1.4 | ColumnadGenMiniDslam3gInfoCurrentTemp | read-only | current | Current temperature of the shelf in degrees celcius. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.1.1.5 | ColumnadGenMiniDslam3gInfoFanNumber | read-only | current | Fan number on the fan tray. This object is intended to be returned only as a varbind for a notification, therefore reading this variable is normally undefined. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.1.1.6 | ColumnadGenMiniDslam3gInfoDspWarmStartReason | read-only | current | Reason that a DSP was reset. This object is intended to be returned only as a varbind for a notification, therefore reading this variable is normally undefined. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.1.1.7 | ColumnadGenMiniDslam3gInfoDownstreamRateLimitPriority | read-write | current | Sets the priority threshold for downstream rate limiting. Downstream traffic is rate limited up to the VID specified. Traffic which is tagged with a higher pri… |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.1.1.8 | ColumnadGenMiniDslam3gInfoCircuitIdChanges | read-only | current | This object is intended to be returned only as a varbind for the adGenMiniDslamAdslCircuitIdChange notification below. This object is a comma delimited list of… |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.1.1.9 | ColumnadGenMiniDslam3gInfoMCastSessionControlStartIP | read-write | current | The first Multicast IP Address in a range of IP addresses that are used by the Multicast Session Control. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.1.1.10 | ColumnadGenMiniDslam3gInfoMCastSessionControlEndIP | read-write | current | The last Multicast IP Address in a range of IP addresses that are used by the Multicast Session Control. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.1.1.11 | ColumnadGenMiniDslam3gInfoMCastSessionControlBitrate | read-write | current | Used to set the bitrate associated with the multicast IP address range of the Multicast Session Control. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.1.1.12 | ColumnadGenMiniDslam3gInfoMacAgingTime | read-write | current | Used on the switch to determine how long to wait before MAC table entries are removed from the table. If 0 is specified, then the switch will learn and lock ea… |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.1.1.13 | ColumnadGenMiniDslam3gInfoLegacyDeployment | read-write | current | Used to enable or disable the Legacy Deployment provisioning for a third generation DSLAM to work under a TA1x00. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.1.1.14 | ColumnadGenMiniDslam3gInfoBondingMode | read-only | current | Used to determine the provisioned bonding mode on products that can not suppot ATM and EFM bonding simultaneously. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.2 | NodeadGenMiniDslam3gTraps | |||
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.2.0 | NodeadGenMiniDslam3gTrapsv1Patch | |||
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.2.0.1 | NotificationadGenMiniDslam3gFanFailureActive | current | Equipment fan failure due to hardware problem. | |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.2.0.2 | NotificationadGenMiniDslam3gFanFailureInactive | current | Equipment fan failure alarm cleared. | |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.2.0.3 | NotificationadGenMiniDslam3gFanTrayRemoved | current | Fan tray removed from equipment. | |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.2.0.4 | NotificationadGenMiniDslam3gFanTrayInserted | current | Fan tray inserted into equipment. | |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.2.0.5 | NotificationadGenMiniDslam3gUserTempActive | current | Sent when the temperature crosses the user defined threshold. | |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.2.0.6 | NotificationadGenMiniDslam3gUserTempCleared | current | Sent when the temperature returns to below the user defined threshold. | |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.2.0.7 | NotificationadGenMiniDslam3gCriticalHiTempActive | current | Indication that temperature had reached the critical threshold. | |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.2.0.8 | NotificationadGenMiniDslam3gCriticalHiTempCleared | current | Indication that the temperature has returned to normal operating range. | |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.2.0.9 | NotificationadGenMiniDslamDspWarmStart | current | Indication that a DSP has reset on the referenced 3g. The reason contains the DSP number. | |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.2.0.11 | NotificationadGenMiniDslamImaLinksOutOfOrderActive | current | Indication that the IMA Link IDs are received out of order on the links in the network feed IMA group. | |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.2.0.12 | NotificationadGenMiniDslamImaLinksOutOfOrderCleared | current | Indication that the IMA Link IDs are received in order on the links in the network feed IMA group that were previously out of order. | |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.2.0.13 | NotificationadGenMiniDslamConfigErrorActive | current | Indication that a problem occured while a config restore or save was attempted. Points to a flash/filesystem problem. | |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.2.0.14 | NotificationadGenMiniDslamConfigErrorCleared | current | Indication that a new config file has been written to replace the faulty one. | |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.2.0.15 | NotificationadGenMiniDslamCircuitIdChange | current | Indication that the customer use OID (aka Circuit ID) was changed for the referenced port. | |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.2.0.16 | NotificationadGenMiniDslamSpanPowerFailureActive | current | A loss of span power was detected on a span power channel. The varbind adGenMiniDslam3gSpanPowerChannel indicates which channel was responsible for the conditi… | |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.2.0.17 | NotificationadGenMiniDslamSpanPowerFailureCleared | current | A loss of span power alarm was cleared on a span power channel. The varbind adGenMiniDslam3gSpanPowerChannel indicates which channel was responsible for the co… | |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.3 | TableadGenMiniDslam3gTestTable | not-accessible | current | This table contains all objects for performing tests on the DSLAM at the slot level. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.3.1 | RowadGenMiniDslam3gTestEntry | not-accessible | current | An entry in the adGenMiniDslam3gTestTable. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.3.1.1 | ColumnadGenMiniDslam3gTestPortNumber | read-write | current | Selected port number for test operation. This is functionally equivalent to the adGenPortInfoIndex of the selected interface. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.3.1.2 | ColumnadGenMiniDslam3gTestFilename | read-write | current | Name of the file to be transmitted via TFTP containing all of the test data for the selected interface. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.3.1.3 | ColumnadGenMiniDslam3gSELTTestStart | read-write | current | Used to initiate the SELT test for the ADSL port. When the SELT test has completed the data file will automatically be tranferred using TFTP to the server spec… |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.3.1.4 | ColumnadGenMiniDslam3gDELTTestStart | read-write | current | Used to initiate the DELT test for the ADSL port. When the DELT test has completed the data file will automatically be tranferred using TFTP to the server spec… |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.3.1.5 | ColumnadGenMiniDslam3gTestStop | read-write | current | Used to cancel any test running for the selected the ADSL port. A get is meaningless and always returns stop(1). |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.3.1.6 | ColumnadGenMiniDslam3gTestSELTDELTStatus | read-only | current | Status of the currently active SELT or DELT test. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.4 | TableadGenMiniDslam3gAdslProvTable | not-accessible | current | This table contains objects for provisioning the DSLAM ADSL Ports. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.4.1 | RowadGenMiniDslam3gAdslProvEntry | not-accessible | current | An entry in the adGenMiniDslam3gAdslProvTable. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.4.1.1 | ColumnadGenMiniDslam3gAdslProvRetrainUasNe | read-write | current | Enable Retrain criteria for UAS NE. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.4.1.2 | ColumnadGenMiniDslam3gAdslProvRetrainMarginNe | read-write | current | Enable Retrain criteria for SNR Margin NE. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.4.1.3 | ColumnadGenMiniDslam3gAdslProvRetrainSesFe | read-write | current | Enable Retrain criteria for SES FE. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.4.1.4 | ColumnadGenMiniDslam3gAdslProvRetrainUasFe | read-write | current | Enable Retrain criteria for UAS FE. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.4.1.5 | ColumnadGenMiniDslam3gAdslProvRetrainMarginFe | read-write | current | Enable Retrain criteria for SNR Margin FE. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.4.1.6 | ColumnadGenMiniDslam3gAdslProvDownstreamRateLimit | read-write | current | Sets the downstream rate limit in bps. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.5 | TableadGenMiniDslam3gMacTable | not-accessible | current | Subscriber Mac Table. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.5.1 | RowadGenMiniDslam3gMacEntry | not-accessible | current | Each entry corresponds to an entry in the Subscriber Mac Table. The ifIndex used here is the customer etherlike port ifIndex associated with the DSL port of in… |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.5.1.1 | ColumnadGenMiniDslam3gMacIndex | not-accessible | current | Index of the entry. Each port can have 0 up to the maximum number allowed for a port, given by the object adGenIpPortMaxMacAddr. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.5.1.2 | ColumnadGenMiniDslam3gMacAddress | read-only | current | Mac Address for this entry. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.5.1.3 | ColumnadGenMiniDslam3gMacVID | read-only | current | VLAN ID |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.5.1.4 | ColumnadGenMiniDslam3gMacType | read-only | current | Entry is typically dynamic or static. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.5.1.5 | ColumnadGenMiniDslam3gMacIP | read-only | current | IP Address for this entry. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.5.1.6 | ColumnadGenMiniDslam3gMacLeaseTime | read-only | current | The expiration counter for this entry, in seconds. When the count reaches 0, the entry will be removed. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.5.1.7 | ColumnadGenMiniDslam3gMacGatewayMac | read-only | current | The gateway's MAC address. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.5.1.8 | ColumnadGenMiniDslam3gMacGatewayIP | read-only | current | The gateway's IP address. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.5.1.9 | ColumnadGenMiniDslam3gMacInterfaceState | read-only | current | The interface state reflects the state of the current session. 0: PPPoEInitialize(0) 1: PPPoEDiscoveryInitiation(1) 2: PPPoEDiscoveryOffer(2) 3: PPPoEDiscovery… |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.5.1.10 | ColumnadGenMiniDslam3gMacXid | read-only | current | The DHCP transaction ID, or for PPPoX sessions, the PPPoX session ID. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.5.1.11 | ColumnadGenMiniDslam3gMacEncapsulationMode | read-only | current | The encapsulation mode for this entry (i.e. DHCP, PPPoE, etc.) |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.5.1.12 | ColumnadGenMiniDslam3gMacStartTime | read-only | current | Timestamp for when entry was created. This is given based off of system uptime, and the units are seconds. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.5.1.13 | ColumnadGenMiniDslam3gMacVpi | read-only | current | VPI for this entry. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.5.1.14 | ColumnadGenMiniDslam3gMacVci | read-only | current | VCI for this entry. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.5.1.15 | ColumnadGenMiniDslam3gMacCTag | read-only | current | C-Tag ID for this entry. A value of 4095 indicates that no CEVlan is present. A value of 4097 indicates that customer traffic can be tagged or untagged. A valu… |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.5.1.16 | ColumnadGenMiniDslam3gMacCEVlan | read-only | current | CE-Vlan ID for this entry. A value of 0 indicates priority tagged traffic A value of 4095 indicates that no CEVlan is present. A value of 4097 indicates that c… |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.5.1.17 | ColumnadGenMiniDslam3gMacIpAddressType | read-only | current | A value that represents a type of Internet address. unknown(0) An unknown address type. This value MUST be used if the value of the corresponding InetAddress o… |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.5.1.18 | ColumnadGenMiniDslam3gMacIpAddress | read-only | current | Denotes a generic Internet address. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.5.1.19 | ColumnadGenMiniDslam3gMacIpAddressPrefix | read-only | current | Denotes the length of a generic Internet network address prefix. A value of n corresponds to an IP address mask that has n contiguous 1-bits from the most sign… |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.6 | NodeadGenMiniDslam3gPerf | |||
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.6.1 | TableadGenMiniDslam3gPerf15MinCurrTable | not-accessible | current | This table contains all the current 15-minute performance statistics for a given port. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.6.1.1 | RowadGenMiniDslam3gPerf15MinCurrEntry | not-accessible | current | Each entry corresponds to current 15-minute performance interval. The ifIndex used should be the ether-like interface for the physical port of interest (either… |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.6.1.1.1 | ColumnadGenMiniDslam3gPerf15MinCurrIngressPackets | read-only | current | Ingress packets. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.6.1.1.2 | ColumnadGenMiniDslam3gPerf15MinCurrIngressBytes | read-only | current | Ingress bytes. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.6.1.1.3 | ColumnadGenMiniDslam3gPerf15MinCurrEgressPackets | read-only | current | Egress packets. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.6.1.1.4 | ColumnadGenMiniDslam3gPerf15MinCurrEgressBytes | read-only | current | Egress bytes. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.6.1.1.5 | ColumnadGenMiniDslam3gPerf15MinCurrEgressOverflowPackets | read-only | current | Egress overflow packets. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.6.1.1.6 | ColumnadGenMiniDslam3gPerf15MinCurrEgressOverflowBytes | read-only | current | Egress overflow bytes. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.6.1.1.7 | ColumnadGenMiniDslam3gPerf15MinCurrValidIntervals | read-only | current | The number of valid historical 15-minute intervals. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.6.2 | TableadGenMiniDslam3gPerf15MinIntTable | not-accessible | current | This table contains all the historical 15-minute performance statistics for a given port and 15-minute interval. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.6.2.1 | RowadGenMiniDslam3gPerf15MinIntEntry | not-accessible | current | Each entry corresponds to a 15-minute performance interval. The ifIndex used should be the ether-like interface for the physical port of interest (either ether… |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.6.2.1.1 | ColumnadGenMiniDslam3gPerf15MinIntInterval | not-accessible | current | Index for interval number. 1 is the most recently completed 15-minute interval. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.6.2.1.2 | ColumnadGenMiniDslam3gPerf15MinIntIngressPackets | read-only | current | Ingress packets. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.6.2.1.3 | ColumnadGenMiniDslam3gPerf15MinIntIngressBytes | read-only | current | Ingress bytes. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.6.2.1.4 | ColumnadGenMiniDslam3gPerf15MinIntEgressPackets | read-only | current | Egress packets. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.6.2.1.5 | ColumnadGenMiniDslam3gPerf15MinIntEgressBytes | read-only | current | Egress bytes. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.6.2.1.6 | ColumnadGenMiniDslam3gPerf15MinIntEgressOverflowPackets | read-only | current | Egress overflow packets. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.6.2.1.7 | ColumnadGenMiniDslam3gPerf15MinIntEgressOverflowBytes | read-only | current | Egress overflow bytes. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.6.3 | TableadGenMiniDslam3gPerfDailyCurrTable | not-accessible | current | This table contains all the current daily performance statistics for a given port. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.6.3.1 | RowadGenMiniDslam3gPerfDailyCurrEntry | not-accessible | current | Each entry corresponds to current daily performance interval. The ifIndex used should be the ether-like interface for the physical port of interest (either eth… |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.6.3.1.1 | ColumnadGenMiniDslam3gPerfDailyCurrIngressPackets | read-only | current | Ingress (received) packets for the current day. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.6.3.1.2 | ColumnadGenMiniDslam3gPerfDailyCurrIngressBytes | read-only | current | Engress (received) bytes for the current day. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.6.3.1.3 | ColumnadGenMiniDslam3gPerfDailyCurrEgressPackets | read-only | current | Egress (transmit) packets for the current day. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.6.3.1.4 | ColumnadGenMiniDslam3gPerfDailyCurrEgressBytes | read-only | current | Egress (transmit) bytes for the current day. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.6.3.1.5 | ColumnadGenMiniDslam3gPerfDailyCurrEgressOverflowPackets | read-only | current | Egress (transmit) overflow packets for the current day. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.6.3.1.6 | ColumnadGenMiniDslam3gPerfDailyCurrEgressOverflowBytes | read-only | current | Egress (transmit) overflow bytes for the current day. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.6.3.1.7 | ColumnadGenMiniDslam3gPerfDailyCurrValidIntervals | read-only | current | The number of historical daily intervals that are available for retrieval. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.6.4 | TableadGenMiniDslam3gPerfDailyIntTable | not-accessible | current | This table contains all the historical daily performance statistics for a given port and day. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.6.4.1 | RowadGenMiniDslam3gPerfDailyIntEntry | not-accessible | current | Each entry corresponds to a daily performance interval. The ifIndex used should be the ether-like interface for the physical port of interest (either ethernetC… |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.6.4.1.1 | ColumnadGenMiniDslam3gPerfDailyIntInterval | not-accessible | current | Index for interval number. 1 is the most recently completed interval (previous day). |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.6.4.1.2 | ColumnadGenMiniDslam3gPerfDailyIntIngressPackets | read-only | current | The number of ingress (received) packets. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.6.4.1.3 | ColumnadGenMiniDslam3gPerfDailyIntIngressBytes | read-only | current | The number of ingress (received) bytes. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.6.4.1.4 | ColumnadGenMiniDslam3gPerfDailyIntEgressPackets | read-only | current | The number of egress (transmitted) packets. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.6.4.1.5 | ColumnadGenMiniDslam3gPerfDailyIntEgressBytes | read-only | current | The number of egress (transmitted) bytes. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.6.4.1.6 | ColumnadGenMiniDslam3gPerfDailyIntEgressOverflowPackets | read-only | current | Egress overflow packets. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.6.4.1.7 | ColumnadGenMiniDslam3gPerfDailyIntEgressOverflowBytes | read-only | current | Egress overflow bytes. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.7 | TableadGenMiniDslam3gVlanVcMapProfileTable | not-accessible | current | This table contains information on the VLAN mappings in an ATM-oriented system (i.e., 'cross-connects' between VLANs and VCLs). One entry in this table reflect… |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.7.1 | RowadGenMiniDslam3gVlanVcMapProfileEntry | not-accessible | current | Each entry corresponds to an Ethernet/VLAN-to-VCL Mapping Profile. The ifIndex used here is the GigE ifIndex associated with the DSL port of interest. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.7.1.1 | ColumnadGenMiniDslam3gVlanVcVpi | read-only | current | The VPI for this entry |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.7.1.2 | ColumnadGenMiniDslam3gVlanVcVci | read-only | current | The VCI for this entry |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.7.1.3 | ColumnadGenMiniDslam3gVlanVcVid | read-only | current | The VID for this entry |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.8 | TableadGenMiniDslam3gSpanPowerTable | not-accessible | current | This table contains objects used to manage a span power supply if so equipped. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.8.1 | RowadGenMiniDslam3gSpanPowerEntry | not-accessible | current | Each entry corresponds to a particular span power channel to a span powered power supply. A single or multiple span power channels may be used by a span powere… |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.8.1.1 | ColumnadGenMiniDslam3gSpanPowerChannel | read-only | current | Number of the span power channel. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.8.1.2 | ColumnadGenMiniDslam3gSpanPowerAlarmEnable | read-write | current | Used to enable or disable alarm reporting for the specified span power channel. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.8.1.3 | ColumnadGenMiniDslam3gSpanPowerStatus | read-only | current | Used to determine if span power is present on the channel. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.9 | TableadGenMiniDslam3gGigeProvTable | not-accessible | current | This table contains objects for provisioning the DSLAM Gigabit Ethernet Ports. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.9.1 | RowadGenMiniDslam3gGigeProvEntry | not-accessible | current | An entry in the adGenMiniDslam3gGigeProvTable. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.9.1.1 | ColumnadGenMiniDslam3gGigeProvRemapPbit0 | read-write | current | Remap priority 0 to the specified value. Packets are reassigned at ingress. Setting this object to 0 will not modify the priority. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.9.1.2 | ColumnadGenMiniDslam3gGigeProvRemapPbit1 | read-write | current | Remap priority 1 to the specified value. Packets are reassigned at ingress. Setting this object to 1 will not modify the priority. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.9.1.3 | ColumnadGenMiniDslam3gGigeProvRemapPbit2 | read-write | current | Remap priority 2 to the specified value. Packets are reassigned at ingress. Setting this object to 2 will not modify the priority. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.9.1.4 | ColumnadGenMiniDslam3gGigeProvRemapPbit3 | read-write | current | Remap priority 3 to the specified value. Packets are reassigned at ingress. Setting this object to 3 will not modify the priority. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.9.1.5 | ColumnadGenMiniDslam3gGigeProvRemapPbit4 | read-write | current | Remap priority 4 to the specified value. Packets are reassigned at ingress. Setting this object to 4 will not modify the priority. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.9.1.6 | ColumnadGenMiniDslam3gGigeProvRemapPbit5 | read-write | current | Remap priority 5 to the specified value. Packets are reassigned at ingress. Setting this object to 5 will not modify the priority. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.9.1.7 | ColumnadGenMiniDslam3gGigeProvRemapPbit6 | read-write | current | Remap priority 6 to the specified value. Packets are reassigned at ingress. Setting this object to 6 will not modify the priority. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.9.1.8 | ColumnadGenMiniDslam3gGigeProvRemapPbit7 | read-write | current | Remap priority 7 to the specified value. Packets are reassigned at ingress. Setting this object to 7 will not modify the priority. |
| 1.3.6.1.4.1.664.6.10000.61.5.1.1.9.1.9 | ColumnadGenMiniDslam3gGigeProvRemapPbitResetAll | read-write | current | Resets all pbit remapping objects to the disabled states (e.g. RemapPbit0 = 0, RemapPbit1 = 1, etc.). A get is meaningless and will always return reset(1). |