ADTRAN-TAeSCU-MIB
268 objects
This MIB defines the objects for the adtranTAeScuMib MIB.
Imported Objects
| ADTRAN-GENSLOT-MIB | adGenSlotInfoIndex |
| ADTRAN-GENTRAPINFORM-MIB | adTrapInformSeqNum |
| ADTRAN-MIB | adMgmt adProducts |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMPv2-MIB | sysName |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.664.1.241 | NodeadTAeSCU | |||
| 1.3.6.1.4.1.664.1.241.0 | IdentityadTAeSCUmgNotificationEvents | current | The SCU/SCM controller events | |
| 1.3.6.1.4.1.664.1.241.0.24101 | NotificationadTAeSCUSystemLogFull | current | System Log is 90% full. The System Log has a circular buffer. The System Log will destroy the oldest half of its entries when it is 100% full. This alarm is us… | |
| 1.3.6.1.4.1.664.1.241.0.24103 | NotificationadTAeSCUSystemLogInvalidAuthentAtt | current | Invalid user authentication attempts. | |
| 1.3.6.1.4.1.664.1.241.0.24105 | NotificationadTAeSCUSystemLogFailure | current | System Log fails to record an event. | |
| 1.3.6.1.4.1.664.1.241.0.24163 | NotificationadTAeSCUSystemInactiveAccountExpiration | current | Inactive account expiration notification. Account set to expired. | |
| 1.3.6.1.4.1.664.2.241 | IdentityadTAeSCUmg | This MIB defines the objects for the adtranTAeScuMib MIB. | ||
| 1.3.6.1.4.1.664.2.241.1 | NodeadTAeSCUConfig | |||
| 1.3.6.1.4.1.664.2.241.1.1 | TableadTAeSCUConfigTable | not-accessible | current | The enhanced System Controller Unit Config table. |
| 1.3.6.1.4.1.664.2.241.1.1.1 | RowadTAeSCUConfigEntry | not-accessible | current | An entry in the eSCU Config table. |
| 1.3.6.1.4.1.664.2.241.1.1.1.1 | ColumnadTAeSCUBootVersion | read-only | current | Firmware version of the boot ROM. |
| 1.3.6.1.4.1.664.2.241.2 | NodeadTAeSCUCardProv | |||
| 1.3.6.1.4.1.664.2.241.2.1 | TableadTAeSCUCardProvTable | not-accessible | current | The enhanced System Controller Unit's (eSCU's) card-level provisioning table. |
| 1.3.6.1.4.1.664.2.241.2.1.1 | RowadTAeSCUCardProvEntry | not-accessible | current | An entry in the enhanced System Controller Unit's (eSCU's) card-level provisioning table. |
| 1.3.6.1.4.1.664.2.241.2.1.1.1 | ColumnadTAeSCUDefaultRouteInterface | read-write | deprecated | Default Route Interface to be used by the Controller. |
| 1.3.6.1.4.1.664.2.241.2.1.1.2 | ColumnadTAeSCUIpForwarding | read-write | current | Determines wether the eSCU will perform IP forwarding. |
| 1.3.6.1.4.1.664.2.241.2.1.1.3 | ColumnadTAeSCURestoreNetProvFromMUX | read-write | current | This setting determines whether or not the eSCU will attempt to restore its IP network interface settings from the online MUX. These settings will be restored … |
| 1.3.6.1.4.1.664.2.241.2.1.1.4 | ColumnadTAeSCUDefaultRouteInterfaceEx | read-write | current | Same as adTAeSCUDefaultRouteInterface but added local-PPP(3), osiTunnel(4), pppDCC0(5), ethernet2(6), and none(999). Default Route Interface to be used by the … |
| 1.3.6.1.4.1.664.2.241.2.1.1.5 | ColumnadTAeSCULogoffCraftDTRLoss | read-write | current | When the Data Terminal Ready(DTR) signal from the connected terminal is lost, the controller can automatically disable the port connection. |
| 1.3.6.1.4.1.664.2.241.2.1.1.6 | ColumnadTAeSCUMinMenuRefresh | read-write | current | The minimum terminal menu refresh rate used to limit the frequency of menu refreshing. |
| 1.3.6.1.4.1.664.2.241.4 | NodeadTAeSCUInterfaceStatus | |||
| 1.3.6.1.4.1.664.2.241.4.1 | TableadTAeSCUInterfaceStatusTable | not-accessible | current | The controller's interface-level status table. |
| 1.3.6.1.4.1.664.2.241.4.1.1 | RowadTAeSCUInterfaceStatusEntry | not-accessible | current | An entry in the controller's interface-level status table. |
| 1.3.6.1.4.1.664.2.241.4.1.1.1 | ColumnadTAeSCUIfNumber | read-only | current | Interface Number assigned by the Controller to it's interfaces. It is used to index this table. It may or may not be equal to the corresponding IfIndex. |
| 1.3.6.1.4.1.664.2.241.4.1.1.2 | ColumnadTAeSCUIfIndex | read-only | current | This value is equal to the corresponding IfIndex for each interface. |
| 1.3.6.1.4.1.664.2.241.4.1.1.3 | ColumnadTAeSCUIfIPAddress | read-only | current | The IP Address assigned to this interface, if any. |
| 1.3.6.1.4.1.664.2.241.4.1.1.4 | ColumnadTAeSCUIfSubnetMask | read-only | current | The Subnet Mask assigned to this interface, if any. |
| 1.3.6.1.4.1.664.2.241.4.1.1.5 | ColumnadTAeSCUIfDefaultGateway | read-only | current | The Default Gateway assigned to this interface, if any. |
| 1.3.6.1.4.1.664.2.241.4.1.1.6 | ColumnadTAeSCUIfSpeed | read-only | current | The Ethernet interface data rate |
| 1.3.6.1.4.1.664.2.241.4.1.1.7 | ColumnadTAeSCUIfXoverCorrection | read-only | current | The Ethernet interface cable crossover correction |
| 1.3.6.1.4.1.664.2.241.4.1.1.8 | ColumnadTAeSCUIfLEDmode | read-only | current | The Ethernet interface LED operation, on for link active only, or blink with link activity |
| 1.3.6.1.4.1.664.2.241.4.1.1.9 | ColumnadTAeSCUIfLinkStatus | read-only | current | The Ethernet interface physical layer (PHY) link status |
| 1.3.6.1.4.1.664.2.241.4.1.1.10 | ColumnadTAeSCUIfLinkRate | read-only | current | The Ethernet interface link rate and duplex mode as determined by the hardware |
| 1.3.6.1.4.1.664.2.241.5 | NodeadTAeSCUSecurityAccountMg | |||
| 1.3.6.1.4.1.664.2.241.5.1 | ScalaradTAeSCUSecurityAccountEnabled | read-only | current | This indicates if SNMP security management is enabled or disabled. To enable SNMP security management go to menus System Controller->Provisioning->General->Sec… |
| 1.3.6.1.4.1.664.2.241.5.2 | NodeadTAeSCUSecAgingGlobalSettings | |||
| 1.3.6.1.4.1.664.2.241.5.2.1 | ScalaradTAeSCUSecAllAccountExpirationTimer | read-write | current | Set all security accounts expiration timer to value. |
| 1.3.6.1.4.1.664.2.241.5.2.2 | ScalaradTAeSCUSecReadOnlyAccountExpirationTimer | read-write | current | READONLY accounts expiration timer. |
| 1.3.6.1.4.1.664.2.241.5.2.3 | ScalaradTAeSCUSecReadWriteAccountExpirationTimer | read-write | current | Set all READWRITEaccounts expiration timer settings value. |
| 1.3.6.1.4.1.664.2.241.5.2.4 | ScalaradTAeSCUSecTestAccountExpirationTimer | read-write | current | Set all TEST accounts age. |
| 1.3.6.1.4.1.664.2.241.5.2.5 | ScalaradTAeSCUSecConfigAccountExpirationTimer | read-write | current | Set all CONFIG expiration timer. |
| 1.3.6.1.4.1.664.2.241.5.2.6 | ScalaradTAeSCUSecAdminAccountExpirationTimer | read-write | current | Set all ADMIN expiration timer. |
| 1.3.6.1.4.1.664.2.241.5.2.7 | ScalaradTAeSCUSecSendAcctExpAlarm | read-write | current | Send Inactive Accounts Alarm Enable. |
| 1.3.6.1.4.1.664.2.241.5.2.8 | ScalaradTAeSCUSecResetAllAccountAge | read-write | current | Resets all account expiration timers to zero. |
| 1.3.6.1.4.1.664.2.241.5.2.10 | ScalaradTAeSCUSecAllPasswordExpirationTimer | read-write | current | Set all security password age set value. |
| 1.3.6.1.4.1.664.2.241.5.2.11 | ScalaradTAeSCUSecReadOnlyPasswordExpirationTimer | read-write | current | Set all security READONLY accounts password expiration timer. |
| 1.3.6.1.4.1.664.2.241.5.2.12 | ScalaradTAeSCUSecReadWritePasswordExpirationTimer | read-write | current | Set all READWRITE accounts password expiration timer settings value. |
| 1.3.6.1.4.1.664.2.241.5.2.13 | ScalaradTAeSCUSecTestPasswordExpirationTimer | read-write | current | Set all TEST accounts password expiration timer. |
| 1.3.6.1.4.1.664.2.241.5.2.14 | ScalaradTAeSCUSecConfigPasswordExpirationTimer | read-write | current | Set all CONFIG accounts password expiration timer. |
| 1.3.6.1.4.1.664.2.241.5.2.15 | ScalaradTAeSCUSecAdminPasswordExpirationTimer | read-write | current | Set all ADMIN accounts password expiration timer. |
| 1.3.6.1.4.1.664.2.241.5.2.20 | ScalaradTAeSCUSecPasswordExpirationWarning | read-write | current | Notification to users requiring them to change their passwords. Number of days prior to expiration to display warning menu. |
| 1.3.6.1.4.1.664.2.241.5.2.21 | ScalaradTAeSCUSecResetAllPasswordAge | read-write | current | Resets all password expiration timers to zero. |
| 1.3.6.1.4.1.664.2.241.5.3 | TableadTAeSCUSecAccountTable | not-accessible | current | The SCU Security Account table. |
| 1.3.6.1.4.1.664.2.241.5.3.1 | RowadTAeSCUSecAccountEntry | not-accessible | current | An entry in the SCU Security Account table. Writeable objects cannot be changed while adTAeSCUSecNumAccountLogin is 1 or more. |
| 1.3.6.1.4.1.664.2.241.5.3.1.1 | ColumnadTAeSCUSecAccountIndex | read-only | current | Security account user Index. |
| 1.3.6.1.4.1.664.2.241.5.3.1.2 | ColumnadTAeSCUSecAccountUserID | read-write | current | Security account user ID name. If account name is zero length (empty) then an account name can be set. Setting a userID name creates an account with default pr… |
| 1.3.6.1.4.1.664.2.241.5.3.1.3 | ColumnadTAeSCUSecAccountStatus | read-write | current | Status of the account. AdTAeSCUSecAccountStatus cannot be changed while number of adTAeSCUSecNumAccountLogin is one or more. |
| 1.3.6.1.4.1.664.2.241.5.3.1.4 | ColumnadTAeSCUSecNumAccountLogin | read-only | current | Number of current logins using this account. Logged in status of account. |
| 1.3.6.1.4.1.664.2.241.5.3.1.5 | ColumnadTAeSCUSecAccountAccessRights | read-write | current | Access rights of account. |
| 1.3.6.1.4.1.664.2.241.5.3.1.7 | ColumnadTAESCUSecChangeAccountPassword | read-write | current | Used to change account password. This string must contain the old password and the new password separated by a \ (backslash) character. Example: password\newpa… |
| 1.3.6.1.4.1.664.2.241.5.3.1.8 | ColumnadTAeSCUSecAccStatusExt | read-write | current | Status of the account. AdTAeSCUSecAccountStatus cannot be changed while number of adTAeSCUSecNumAccountLogin is one or more. |
| 1.3.6.1.4.1.664.2.241.5.3.1.9 | ColumnadTAeSCUSecAccExpTime | read-write | current | Security account expiration time. |
| 1.3.6.1.4.1.664.2.241.5.3.1.10 | ColumnadTAeSCUSecAccPasswordExpTime | read-write | current | Security account password expiration time. |
| 1.3.6.1.4.1.664.2.241.5.3.1.11 | ColumnadTAeSCUSecAccountAge | read-only | current | Security account age. |
| 1.3.6.1.4.1.664.2.241.5.3.1.12 | ColumnadTAeSCUSecAccPasswordAge | read-only | current | Security account password age. |
| 1.3.6.1.4.1.664.2.241.5.3.1.13 | ColumnadTAeSCUSecResetAccountAge | read-write | current | Reset security account age. |
| 1.3.6.1.4.1.664.2.241.5.3.1.14 | ColumnadTAeSCUSecResetAccPasswordAge | read-write | current | Reset security account password age. |
| 1.3.6.1.4.1.664.2.241.5.3.1.15 | ColumnadTAeSCUAccExpirationEnabled | read-write | current | Enable or disable single account expiration. |
| 1.3.6.1.4.1.664.2.241.5.3.1.16 | ColumnadTAeSCUAccPasswordAccAgingEnabled | read-write | current | Enable or disable single account password aging. |
| 1.3.6.1.4.1.664.2.241.5.3.1.17 | ColumnadTAeSCUSecForcePasswordReset | read-write | current | Forces user to reset their password upon next login. |
| 1.3.6.1.4.1.664.2.241.5.4 | TableadTAeSCUSecAccountLoggedInTable | not-accessible | current | The SCU Security Account table. |
| 1.3.6.1.4.1.664.2.241.5.4.1 | RowadTAeSCUSecAccountLoggedInEntry | not-accessible | current | An entry in the SCU Security Account table. |
| 1.3.6.1.4.1.664.2.241.5.4.1.1 | ColumnadTAeSCUSecAccountloginIndex | read-only | current | Index to indicate the order the user was logged in. |
| 1.3.6.1.4.1.664.2.241.5.4.1.2 | ColumnadTAeSCUSecAccountLoginUserIDIndex | read-only | current | Security account user Index. |
| 1.3.6.1.4.1.664.2.241.5.4.1.3 | ColumnadTAeSCUSecAccountLoginUserID | read-only | current | Security account user ID name. |
| 1.3.6.1.4.1.664.2.241.5.4.1.4 | ColumnadTAeSCUSecAccountConnectionType | read-only | current | Method of connection to unit. |
| 1.3.6.1.4.1.664.2.241.5.4.1.5 | ColumnadTAeSCUSecAccountSessionType | read-only | current | Connection session type. |
| 1.3.6.1.4.1.664.2.241.5.4.1.6 | ColumnadTAeSCUSecAccountLoginConnectionSource | read-only | current | Connection source of login. This could be an IP address or some other type of address |
| 1.3.6.1.4.1.664.2.241.5.4.1.7 | ColumnadTAeSCUSecAccountLoginDateTime | read-only | current | String display of login date and time. Formant: mm/dd/yyyy and 24 hour time string in format hh:mm:ss |
| 1.3.6.1.4.1.664.2.241.5.4.1.8 | ColumnadTAeSCUSecAccountConnectionPort | read-only | current | Port on which the indexed user's connection is established. |
| 1.3.6.1.4.1.664.2.241.5.4.1.9 | ColumnadTAeSCUSecAccountDisconnectSession | read-write | current | Disconnect Indexed user's session. |
| 1.3.6.1.4.1.664.2.241.5.5 | ScalaradTAeSCUAccountExpirationEnabled | read-write | current | Enable or disable account expiration for accounts. |
| 1.3.6.1.4.1.664.2.241.5.6 | ScalaradTAeSCUPasswordAgingEnabled | read-write | current | Enable or disable password aging. |
| 1.3.6.1.4.1.664.2.241.5.7 | ScalaradTAeSCUSecuritySnmpAccountMgEnableDisable | read-write | current | Enable or disable SNMP Access to security management. Set a formatted string with [command] [backslash] [local ADMIN_account_name][backslash] [password]. Comma… |
| 1.3.6.1.4.1.664.2.241.5.8 | ScalaradTAeSCUSecAccountAuthenticationMethod | read-write | current | The authentication method use to login to the controller. If authentication failure occours, no other method will be used. If access is granted, no other metho… |
| 1.3.6.1.4.1.664.2.241.5.9 | NodeadTAeSCUSysRADIUsConfig | |||
| 1.3.6.1.4.1.664.2.241.5.9.2 | ScalaradTAeScuRADIUSServAuthentication | read-write | deprecated | Determine how the user Login into the system. |
| 1.3.6.1.4.1.664.2.241.5.9.3 | ScalaradTAeScuRadiusTL1Authentication | read-write | current | Determine how the user Login into TL1. |
| 1.3.6.1.4.1.664.2.241.5.9.4 | ScalaradTAeScuRadiusAccountAccessLevel | read-write | current | Default account access previledge given to a RADIUS account if the RADIUS Server does not provide the Adtran level. Access privilege will be communicated as a … |
| 1.3.6.1.4.1.664.2.241.5.9.5 | ScalaradTAeScuRADIUSFallbackMode | read-write | deprecated | Determine how the user Login to the controller there is a failure to contact all four RADIUS servers. If fall back mode will be controlled by adTAeSCUSecAccoun… |
| 1.3.6.1.4.1.664.2.241.5.9.6 | TableadTAeScuRADIUSServerTable | not-accessible | current | RADIUS authentication settings. |
| 1.3.6.1.4.1.664.2.241.5.9.6.1 | RowadTAeScuRADIUSServerEntry | not-accessible | current | An entry in the RADIUS settings table. |
| 1.3.6.1.4.1.664.2.241.5.9.6.1.1 | ColumnadTAeScuRadiusCfgIndex | read-only | current | An Index to RADIUS authentication settings |
| 1.3.6.1.4.1.664.2.241.5.9.6.1.2 | ColumnadTAeScuRadiusServerAddress | read-write | deprecated | RADIUS Server IP address. deprecated to support IPv6. Use adTAeScuRadiusServerInetAddress. |
| 1.3.6.1.4.1.664.2.241.5.9.6.1.3 | ColumnadTAeScuRadiusServerPortNumber | read-write | current | RADIUS Server IP port address. |
| 1.3.6.1.4.1.664.2.241.5.9.6.1.4 | ColumnadTAeScuRadiusServerSecret | read-write | current | The key used in encrypting the packets passed between the RADIUS Server and the client. This key must match the one configured on the server. |
| 1.3.6.1.4.1.664.2.241.5.9.6.1.5 | ColumnadTAeScuRADIUSServRetries | read-write | current | Number of retries to contact RADIUS Server. |
| 1.3.6.1.4.1.664.2.241.5.9.6.1.6 | ColumnadTAeScuRADIUSServContactTimeOut | read-write | current | RADIUS Server responses time out in milliseconds. |
| 1.3.6.1.4.1.664.2.241.5.9.6.1.7 | ColumnadTAeScuRadiusServerSequence | read-write | current | RADIUS Server sequence that ranks priority of each server. [0] if no IP is assigned at given index. [1-4] for each additional server added in increasing order.… |
| 1.3.6.1.4.1.664.2.241.5.9.6.1.8 | ColumnadTAeScuRadiusServerName | read-write | current | Name to be assigned to a given RADIUS server for ease of reference. Can use either the given name assigned or the IP associated with server to reference it. |
| 1.3.6.1.4.1.664.2.241.5.9.6.1.9 | ColumnadTAeScuRadiusServerAddressType | read-only | current | The type of adTAeScuRadiusServerInetAddress. |
| 1.3.6.1.4.1.664.2.241.5.9.6.1.10 | ColumnadTAeScuRadiusServerInetAddress | read-write | current | RADIUS Server IP address. Backwards compatibility: Setting this address to a IPv4 address will provision old address adTAeScuRadiusServerAddress with the new a… |
| 1.3.6.1.4.1.664.2.241.5.10 | NodeadTAeSCUSysPasswordComplexity | |||
| 1.3.6.1.4.1.664.2.241.5.10.1 | ScalaradTAeSCUSysEnablePswdComplexity | read-write | current | Enable or disable Password Complexity algorithms. |
| 1.3.6.1.4.1.664.2.241.5.10.2 | ScalaradTAeSCUSysMinPasswordLength | read-write | current | Minimum password length required. |
| 1.3.6.1.4.1.664.2.241.5.10.3 | ScalaradTAeSCUSysUpperCaseRequired | read-write | current | Upper case character required in password. |
| 1.3.6.1.4.1.664.2.241.5.10.4 | ScalaradTAeSCUSysLowerCaseRequired | read-write | current | Lower case character required in password. |
| 1.3.6.1.4.1.664.2.241.5.10.5 | ScalaradTAeSCUSysDigitRequired | read-write | current | A digit is required in password. |
| 1.3.6.1.4.1.664.2.241.5.10.6 | ScalaradTAeSCUSysSpecialCharacterRequired | read-write | current | A special character is required in password. |
| 1.3.6.1.4.1.664.2.241.5.10.7 | ScalaradTAeSCUSysCaseSensitivePassword | read-write | current | The system will store a case sensitive password. |
| 1.3.6.1.4.1.664.2.241.5.10.8 | ScalaradTAeSCUSysNullPasswordAccepted | read-write | deprecated | This OID will no longer work. A NULL password is accepted. |
| 1.3.6.1.4.1.664.2.241.5.10.10 | ScalaradTAeSCUSecPasswordStartEndDigitCheck | read-write | current | Password cannot start or end with a digit. |
| 1.3.6.1.4.1.664.2.241.5.10.12 | ScalaradTAeSCUSecLastSixPasswordCheck | read-write | current | Password cannot be the same as previous six passwords. |
| 1.3.6.1.4.1.664.2.241.5.12 | NodeadTAeScuAccLockOutSettings | |||
| 1.3.6.1.4.1.664.2.241.5.12.1 | ScalaradTAeScuEnableAccLoginFailureLockOut | read-write | current | Enable users to be locked-out after failed login attempts. |
| 1.3.6.1.4.1.664.2.241.5.12.2 | ScalaradTAeScuEnableLockOutAlarm | read-write | current | Generate an alarm when an account triggers lock-out conditions. |
| 1.3.6.1.4.1.664.2.241.5.12.3 | ScalaradTAeScuEnableIndefLockOut | read-write | current | Forces the account to be reset by an Administrator once locked.. |
| 1.3.6.1.4.1.664.2.241.5.12.4 | ScalaradTAeScuNumLockOutLoginAttempts | read-write | current | Number of consecutive failed login attempts before a lockout occurs. |
| 1.3.6.1.4.1.664.2.241.5.12.5 | ScalaradTAeScuLockOutDuration | read-write | current | The number of minutes the user will be locked out. |
| 1.3.6.1.4.1.664.2.241.5.13 | NodeadTAeTrustedClientConfig | |||
| 1.3.6.1.4.1.664.2.241.5.13.3 | ScalaradTAeTrustedIPClientAccessControl | read-write | current | Enable or disable IP Access to the controller based on the Trusted IP Client list. An IP address not on the list will be rejected. **********WARNING********** … |
| 1.3.6.1.4.1.664.2.241.5.13.4 | ScalaradTAeTrustedIPClientAccessName | read-write | current | Tursted IP Access-list name. Deletes all Trusted IP Clients when set to an empty string. Disables Trusted IP Clients feature when set to an empty string. |
| 1.3.6.1.4.1.664.2.241.5.13.6 | TableadTAeTrustedIPClientTable | not-accessible | current | Trusted IP Client Table. |
| 1.3.6.1.4.1.664.2.241.5.13.6.1 | RowadTAeTrustedIPClientEntry | not-accessible | current | An entry in theTrusted IP Client table. |
| 1.3.6.1.4.1.664.2.241.5.13.6.1.1 | ColumnadTAeTrustedClientStatus | read-write | current | An Index to adTAeTrustedIPClientTable. |
| 1.3.6.1.4.1.664.2.241.5.13.6.1.2 | ColumnadTAeTrustedIPAddress | read-only | current | An IPv4 address that is allowed access to the controller. |
| 1.3.6.1.4.1.664.2.241.5.13.6.1.3 | ColumnadTAeTrustedIPNetworkBits | read-only | current | This number is used to generate a netmask. Each connection IP address is masked and compeared to a adTAeTrustedIPAddress masked generated by adTAeTrustedIPNetw… |
| 1.3.6.1.4.1.664.2.241.5.13.6.1.4 | ColumnadTAeTrustedClientResource | read-write | current | Indicate what type of access a trusted client has. |
| 1.3.6.1.4.1.664.2.241.5.13.8 | TableadTAeTrustedInetClientTable | not-accessible | current | IPv4 and IPv6 Trusted IP Client Table. |
| 1.3.6.1.4.1.664.2.241.5.13.8.1 | RowadTAeTrustedInetClientEntry | not-accessible | current | An entry in the IPv4 and IPv6 Trusted IP Client Table. |
| 1.3.6.1.4.1.664.2.241.5.13.8.1.1 | ColumnadTAeTrustedInetClientStatus | read-write | current | The status of the IPv4 and IPv6 address in the Trusted IP Client Table. |
| 1.3.6.1.4.1.664.2.241.5.13.8.1.2 | ColumnadTAeTrustedInetAddressType | read-only | current | The type of adTAeTrustedInetAddress. |
| 1.3.6.1.4.1.664.2.241.5.13.8.1.3 | ColumnadTAeTrustedInetNetworkBits | read-only | current | This number is used to generate a netmask. Each connection IP address is masked and compared to a adTAeTrustedInetAddress masked generated by adTAeTrustedInetN… |
| 1.3.6.1.4.1.664.2.241.5.13.8.1.4 | ColumnadTAeTrustedInetAddress | read-only | current | An IPv4 or IPv6 address that is allowed access to the controller. |
| 1.3.6.1.4.1.664.2.241.5.13.8.1.5 | ColumnadTAeTrustedInetClientResource | read-write | current | Indicate what type of access a trusted client has in the IPv4 and IPv6 Trusted IP Client Table.. |
| 1.3.6.1.4.1.664.2.241.5.20 | NodeadTAeSCUSysAdvisoryConfig | |||
| 1.3.6.1.4.1.664.2.241.5.20.1 | ScalaradTAeScuEnableMenuAdvisoryWarningMsg | read-write | current | Enable or disable Menu Advisory Waring Message. |
| 1.3.6.1.4.1.664.2.241.5.20.2 | ScalaradTAeScuEnableTL1AdvisoryWarningMsg | read-write | current | Enable or disable TL1 Advisory Warning Message. |
| 1.3.6.1.4.1.664.2.241.5.20.3 | ScalaradTAeScuSysSavedTextJustification | read-only | current | Set the text justification for how the Advisory Warning is displayed. |
| 1.3.6.1.4.1.664.2.241.5.20.6 | TableadTAeScuSavedAdvisoryTable | not-accessible | current | Non-Volatile Saved Advisory Warning. |
| 1.3.6.1.4.1.664.2.241.5.20.6.1 | RowadTAeScuSavedAdvisoryEntry | not-accessible | current | An entry in the adTAeScuSavedAdvisoryTable. |
| 1.3.6.1.4.1.664.2.241.5.20.6.1.1 | ColumnadTAeScuAdvisoryLineIndex | read-only | current | An Index to Advisory Warning line. |
| 1.3.6.1.4.1.664.2.241.5.20.6.1.2 | ColumnadTAeScuSavedAdvisoryWarning | read-only | current | Advisory Warning line. |
| 1.3.6.1.4.1.664.2.241.5.20.10 | ScalaradTAeScuSysSaveOrResetEditAdvisoryWarning | read-write | current | Save edit changes made to Advisory Warning. saveAdvisoryWarningChanges - Save the Edited Advisory Warning resetAdvisoryWarning - Reset Edited Advisory Warning … |
| 1.3.6.1.4.1.664.2.241.5.20.11 | ScalaradTAeScuSysEditTextJustification | read-write | current | Set the text justification for how the Advisory Warning is displayed. |
| 1.3.6.1.4.1.664.2.241.5.20.15 | TableadTAeScuEditedAdvisoryTable | not-accessible | current | Volatile Edited Advisory Warning. |
| 1.3.6.1.4.1.664.2.241.5.20.15.1 | RowadTAeScuEditedAdvisoryEntry | not-accessible | current | A Volatile Edited Advisory Warning line. |
| 1.3.6.1.4.1.664.2.241.5.20.15.1.2 | ColumnadTAeScuEditedAdvisoryWarning | read-write | current | Volatile Ram Edited Advisory Warning line. |
| 1.3.6.1.4.1.664.2.241.5.21 | NodeadTAeSCUSysBulkDataExportServerConfig | |||
| 1.3.6.1.4.1.664.2.241.5.21.1 | ScalaradTAeSCUSysBulkDataExportHost | read-write | current | The IP address of the server to receive exported bulk data files. |
| 1.3.6.1.4.1.664.2.241.5.21.2 | ScalaradTAeSCUSysBulkDataExportUserName | read-write | current | The user name for the server to receive exported bulk data files, Maximum number of 30 characters for the username. |
| 1.3.6.1.4.1.664.2.241.5.21.3 | ScalaradTAeSCUSysBulkDataExportPassword | read-write | current | The password of the server to receive exported bulk data files. Maximum number of 30 characters for the password. |
| 1.3.6.1.4.1.664.2.241.5.21.4 | ScalaradTAeSCUSysBulkDataExportProtocol | read-write | current | The protocol used to transfer the exported bulk data files. |
| 1.3.6.1.4.1.664.2.241.5.21.5 | ScalaradTAeSCUSysBulkDataExportPort | read-write | current | The port used to transfer the exported bulk data files. |
| 1.3.6.1.4.1.664.2.241.5.21.6 | ScalaradTAeSCUSysBulkDataExportPath | read-write | current | The destination path on the server to export bulk data files. Maximum number of 200 characters for the path. |
| 1.3.6.1.4.1.664.2.241.5.25 | TableadTAeSCUSecLoginStatTable | not-accessible | current | The SCU Security Account table. |
| 1.3.6.1.4.1.664.2.241.5.25.1 | RowadTAeSCUSecLoginStatEntry | not-accessible | current | An entry in the SCU Security Login Statistics table. |
| 1.3.6.1.4.1.664.2.241.5.25.1.3 | ColumnadTAeSCUSecLoginStatUserID | read-only | current | Security account user ID name. |
| 1.3.6.1.4.1.664.2.241.5.25.1.5 | ColumnadTAeSCUSecNumberOfLogins | read-only | current | The total number of logins recorded. |
| 1.3.6.1.4.1.664.2.241.5.25.1.7 | ColumnadTAeSCUSecTotalNumLoginFailures | read-only | current | The total number of login failures recorded for the account. |
| 1.3.6.1.4.1.664.2.241.5.25.1.9 | ColumnadTAeSCUSecNumFailuresSinceLastLogin | read-only | current | The total number of login failures since the last login of this account. |
| 1.3.6.1.4.1.664.2.241.5.25.1.13 | ColumnadTAeSCUSecLastLoginDateTime | read-only | current | String display of login date and time. Formant: mm/dd/yyyy and 24 hour time string in format hh:mm |
| 1.3.6.1.4.1.664.2.241.5.25.1.14 | ColumnadTAeSCUSecLastConnectionType | read-only | current | The connection type of the login. |
| 1.3.6.1.4.1.664.2.241.5.25.1.15 | ColumnadTAeSCUSecLastSessionType | read-only | current | The Session Type of the login. |
| 1.3.6.1.4.1.664.2.241.5.25.1.16 | ColumnadTAeSCUSecLastIPAddress | read-only | current | The the IPAddress of the login. |
| 1.3.6.1.4.1.664.2.241.5.26 | NodeadTAeSCUSecAdvancedLoginOptions | |||
| 1.3.6.1.4.1.664.2.241.5.26.1 | ScalaradTAeSCUSecChallengeKey | read-write | current | Set all security accounts expiration timer to value. |
| 1.3.6.1.4.1.664.2.241.5.26.2 | ScalaradTAeSCUSecMultiLoginAcct | read-write | current | READONLY accounts expiration timer. |
| 1.3.6.1.4.1.664.2.241.5.26.3 | ScalaradTAeSCUSecRemoteMenuAccessRequired | read-write | current | Set all READWRITEaccounts expiration timer settings value. |
| 1.3.6.1.4.1.664.2.241.5.30 | NodeadTAeSCUSysTACACSPlusConfig | |||
| 1.3.6.1.4.1.664.2.241.5.30.3 | ScalaradTAeScuTACACSPlusTL1Authentication | read-write | current | Determine how the user Login into TL1. |
| 1.3.6.1.4.1.664.2.241.5.30.6 | TableadTAeScuTACACSPlusServerTable | not-accessible | current | TACACS Plus authentication settings. |
| 1.3.6.1.4.1.664.2.241.5.30.6.1 | RowadTAeScuTACACSPlusServerEntry | not-accessible | current | An entry in the TACACS Plus settings table. |
| 1.3.6.1.4.1.664.2.241.5.30.6.1.1 | ColumnadTAeScuTACACSPlusCfgIndex | read-only | current | An Index to TACACS Plus authentication settings |
| 1.3.6.1.4.1.664.2.241.5.30.6.1.2 | ColumnadTAeScuTACACSPlusServerAddress | read-write | deprecated | TACACS Plus Server IP address. deprecated to support IPv6. Use adTAeScuTACACSPlusServerInetAddress. |
| 1.3.6.1.4.1.664.2.241.5.30.6.1.3 | ColumnadTAeScuTACACSPlusServerName | read-write | current | TACACS Plus Server Name. |
| 1.3.6.1.4.1.664.2.241.5.30.6.1.4 | ColumnadTAeScuTACACSPlusServerSecret | read-write | current | The key used in encrypting the packets passed between the TACACS Plus Server and the client. This key must match the one configured on the server. |
| 1.3.6.1.4.1.664.2.241.5.30.6.1.5 | ColumnadTAeScuTACACSPlusServerSequence | read-write | current | TACACS Plus Server sequence. |
| 1.3.6.1.4.1.664.2.241.5.30.6.1.6 | ColumnadTAeScuTACACSPlusServContactTimeOut | read-write | current | TACACS Plus Server responses time out in milliseconds. |
| 1.3.6.1.4.1.664.2.241.5.30.6.1.8 | ColumnadTAeScuTACACSPlusServerPort | read-write | current | TACACS Plus Server port number. |
| 1.3.6.1.4.1.664.2.241.5.30.6.1.9 | ColumnadTAeScuTACACSPlusServerAddressType | read-only | current | The type of adTAeScuTACACSPlusServerInetAddress. |
| 1.3.6.1.4.1.664.2.241.5.30.6.1.10 | ColumnadTAeScuTACACSPlusServerInetAddress | read-write | current | TACACS Plus Server IP address (InetAddress). Backwards compatibility: Setting this address to a IPv4 address will provision old address adTAeScuTACACSPlusServe… |
| 1.3.6.1.4.1.664.2.241.6 | NodeadTAeSCUNetworkMgmt | |||
| 1.3.6.1.4.1.664.2.241.6.1 | ScalaradTAeSCUNetworkMgmtPortBaudRate | read-write | current | Network Interface Port Baud Rate. |
| 1.3.6.1.4.1.664.2.241.6.2 | ScalaradTAeSCUNetworkMgmtPortComMode | read-write | current | Eth2/PPP0 Network interface port operating mode.. |
| 1.3.6.1.4.1.664.2.241.6.3 | ScalaradTAeSCUNetworkMgmtPPPSerialPortMode | read-write | current | Determines wether the local eSCU PPP port will use 'sync' or 'async' communications mode of the network management port. |
| 1.3.6.1.4.1.664.2.241.6.4 | ScalaradTAeSCUNetworkMgmtInterbankComMode | read-write | current | Communication mode when systems are wired in a daisy chained configuration. When installed as a standalone chassis it can be set to either value. |
| 1.3.6.1.4.1.664.2.241.6.5 | ScalaradTAeSCUNetworkMgmtInterbankComModeWritable | read-only | current | Communication mode is not writable for CLIENT units when a HOST is present. |
| 1.3.6.1.4.1.664.2.241.6.6 | ScalaradTAeSCUNetworkMgmtSecurityEnable | read-write | current | Require authentication. |
| 1.3.6.1.4.1.664.2.241.7 | NodeadTAeSCUsDNS | |||
| 1.3.6.1.4.1.664.2.241.7.1 | ScalaradTAeScuDNSlookupService | read-write | current | Determines whether DNS lookup services are enabled. |
| 1.3.6.1.4.1.664.2.241.7.2 | ScalaradTAeScuDNSprimaryIP | read-write | deprecated | Primary DNS name server IP address. Zero signifies 'none'. This OID is deprecated. Use ipDNSLookupIpNetAddress.1 to configure DNS Address. |
| 1.3.6.1.4.1.664.2.241.7.3 | ScalaradTAeScuDNSsecondaryIP | read-write | deprecated | Secondary DNS name server IP address. Zero signifies 'none'. This OID is deprecated. Use ipDNSLookupIpNetAddress.2 to configure DNS Address. |
| 1.3.6.1.4.1.664.2.241.7.4 | ScalaradTAeScuDNSsearchList | read-write | current | Domain access search list. A space separated list of domain names. An empty string signifies 'none'. |
| 1.3.6.1.4.1.664.2.241.7.5 | TableipDNSLookupIpTable | not-accessible | current | The DNS primary and Secondary IP server.. Set primary DNS server index 1 Set secondary DNS server index 2 |
| 1.3.6.1.4.1.664.2.241.7.5.1 | RowipDNSLookupIpTableEntry | not-accessible | current | Each entry contains one IP address to `physical' address equivalence. |
| 1.3.6.1.4.1.664.2.241.7.5.1.1 | ColumnipDNSLookupIpIndex | not-accessible | current | The index value that uniquely identifies the primary or secondary DNS server IP Address. Index 1 for Primary DNS server address. Index 2 for Secondary DNS serv… |
| 1.3.6.1.4.1.664.2.241.7.5.1.2 | ColumnipDNSLookupIpInetAddressType | read-only | current | The type of ipDNSLookupIpNetAddress. |
| 1.3.6.1.4.1.664.2.241.7.5.1.3 | ColumnipDNSLookupIpInetAddress | read-write | current | The IP Address corresponding to the DNS server. Index 1 for Primary DNS server address. Index 2 for Secondary DNS server address. Backwards compatibility: Sett… |
| 1.3.6.1.4.1.664.2.241.8 | NodeadTAeSCUFirmwareTFTPConfigMgmt | |||
| 1.3.6.1.4.1.664.2.241.8.1 | ScalaradTAeScuFirmwareTftpRemoteFileName | read-write | current | Firmware TFTP remote file name |
| 1.3.6.1.4.1.664.2.241.8.2 | ScalaradTAeScuFirmwareTftpServerHostName | read-write | deprecated | Symbolic DNS name or dotted-quad IP address of the firmware TFTP server |
| 1.3.6.1.4.1.664.2.241.8.3 | ScalaradTAeScuFirmwareTftpServerIP | read-only | deprecated | Firmware TFTP server IP address. Zero signifies 'none'. This OID is deprecated. Use adTAeScmFirmwareTftpServerIPInetAddress to configure Firmware TFTP server I… |
| 1.3.6.1.4.1.664.2.241.8.4 | ScalaradTAeScuFirmwareTftpCacheExpire | read-write | current | The CacheExpire value specifies how many minutes a flash file may be retained on the SCU before it will again be retrieved from the TFTP server. If a subsequen… |
| 1.3.6.1.4.1.664.2.241.8.5 | ScalaradTAeScuFirmwareTftpInvalidate | read-write | current | This OID instructs the TFTP Cache system to discard any information that may be currently cached. The next TFTP 'get' operation will be being retrieved from th… |
| 1.3.6.1.4.1.664.2.241.8.6 | ScalaradTAeScmFirmwareTftpServerInetAddressType | read-only | current | Firmware TFTP server IP address type (Ipv6 or Ipv4). |
| 1.3.6.1.4.1.664.2.241.8.7 | ScalaradTAeScmFirmwareTftpServerIPInetAddress | read-write | current | Firmware TFTP server IP address. Ipv6 or Ipv4. Backwards compatibility: Setting this address to a IPv4 address will update adTAeScuFirmwareTftpServerHostName a… |
| 1.3.6.1.4.1.664.2.241.9 | NodeadTAeSCUSystemConfigArchiveMgmt | |||
| 1.3.6.1.4.1.664.2.241.9.1 | ScalaradTAeScuSCATftpServerHostName | read-write | deprecated | Symbolic DNS name or dotted-quad IP address of the config/SCA TFTP server. This OID is deprecated. Use adTAeScuSCATftpServerHostNameInetAddress to configure co… |
| 1.3.6.1.4.1.664.2.241.9.2 | ScalaradTAeScuSCATftpServerIP | read-only | current | Numeric IP address of the config/SCA TFTP server |
| 1.3.6.1.4.1.664.2.241.9.3 | ScalaradTAeScuSCATftpServerIPInetAddressType | read-only | current | InetAddressType of IP address of the config/SCA TFTP server |
| 1.3.6.1.4.1.664.2.241.9.4 | ScalaradTAeScuSCATftpServerHostNameInetAddress | read-write | current | IP InetAddress of the config/SCA TFTP server. Backwards compatibility: Setting this address to a IPv4 address will update adTAeScuSCATftpServerHostName provisi… |
| 1.3.6.1.4.1.664.2.241.9.10 | NodeadTAeSCUSCAControl | |||
| 1.3.6.1.4.1.664.2.241.9.10.1 | ScalaradTAeScuSCAFileName | read-write | current | Config/SCA file name. SCA filename to use during explicit or manual SCA save/restore operations from SNMP and menu sessions. This filename has no affect on SCA… |
| 1.3.6.1.4.1.664.2.241.9.10.2 | ScalaradTAeScuSCAInitiateSave | read-write | current | Initiate manual SCA Save operation to customer TFTP server. |
| 1.3.6.1.4.1.664.2.241.9.10.3 | ScalaradTAeScuSCAInitiateRestore | read-write | current | Initiate Restore of SCA from customer TFTP server |
| 1.3.6.1.4.1.664.2.241.9.10.4 | ScalaradTAeScuSCAProvItemChanged | read-only | current | Bitmap of cards with changed provisions. This read-only OID will return a bitmap of slots whose provisions have changed since power-up or the last SCA save ope… |
| 1.3.6.1.4.1.664.2.241.9.10.5 | ScalaradTAeScuSCAPresentCards | read-only | current | Bitmap of card 'present' in the shelf. This read-only OID will return a bitmap of slots with cards installed. DB1 corresponds DB0 corresponds to the Accessory … |
| 1.3.6.1.4.1.664.2.241.9.10.6 | ScalaradTAeScuSCASlotsWithProvData | read-only | current | Bitmap of slots with provision data. This read-only OID will return a bitmap of slots with provision information. DB1 corresponds to slot 1, DB31 corresponds t… |
| 1.3.6.1.4.1.664.2.241.9.10.7 | ScalaradTAeScuSCASlotsInSCA | read-only | current | Bitmap of slots in SCA. This read-only OID will return a bitmap of slots with provision information. DB1 corresponds to slot 1, DB31 corresponds to slot 31. DB… |
| 1.3.6.1.4.1.664.2.241.9.10.8 | ScalaradTAeScuSCASlotsWithProvDataInSCA | read-only | current | Bitmap of slots with provision data in SCA. This read-only OID will return a bitmap of slots with provision information. DB1 corresponds to slot 1, DB31 corres… |
| 1.3.6.1.4.1.664.2.241.9.10.10 | TableadTAeSCUSCAOperationStatusTable | not-accessible | current | Operation status for each slot table. |
| 1.3.6.1.4.1.664.2.241.9.10.10.1 | RowadTAeSCUSCAOperationStatusEntry | not-accessible | current | Operation status for each slot table. |
| 1.3.6.1.4.1.664.2.241.9.10.10.1.1 | ColumnadTAeScuSCAOperationStatus | read-only | current | SCA system status: This read-only string will return a formatted string indicating the progress or status of the current or most recent SCA operation. |
| 1.3.6.1.4.1.664.2.241.9.11 | NodeadTAeSCUSCAAutoSaveMgmt | |||
| 1.3.6.1.4.1.664.2.241.9.11.1 | ScalaradTAeScuSCAAutoSave | read-write | current | Enable or disable AutoSave. |
| 1.3.6.1.4.1.664.2.241.9.11.3 | ScalaradTAeScuSCAAutoSaveRetries | read-write | current | AutoSave retries. |
| 1.3.6.1.4.1.664.2.241.9.11.5 | ScalaradTAeScuSCAAutoSaveIfChanged | read-write | current | This OID allows the admin to reduce the amount of SCA-related network traffic by instructing the eSCU to save SCA information only if provision changes have be… |
| 1.3.6.1.4.1.664.2.241.9.11.7 | ScalaradTAeScuSCAAutoSaveFileNamePrefix | read-write | current | This OID controls the SCA autosave filename prefix, which is used to construct the full SCA autosave archive filename. The final filename will consist of this … |
| 1.3.6.1.4.1.664.2.241.9.11.9 | ScalaradTAeScuSCAAutoSaveFileNameSuffix | read-write | current | This OID controls the SCA autosave filename suffix, which is used to construct the full SCA autosave archive filename. The final filename will consist of the S… |
| 1.3.6.1.4.1.664.2.241.9.11.11 | ScalaradTAeScuSCAAutoSaveInstances | read-write | current | This OID controls the maximum number of SCA filename instances to save, or 'rotate' through on the SCA TFTP server. The eSCU will first save instance '1', then… |
| 1.3.6.1.4.1.664.2.241.9.11.13 | ScalaradTAeScuSCAAutoSaveHoursAfter | read-write | current | This OID controls how many hours after midnight autosave operations should be scheduled. This allows the admin to balance the SCA autosave load of many shelves… |
| 1.3.6.1.4.1.664.2.241.9.11.15 | ScalaradTAeScuSCAAutoSaveMinutesAfter | read-write | current | This OID controls how many minutes after the 'hour' oid autosave operations should be scheduled. This allows the admin to balance the SCA autosave load of many… |
| 1.3.6.1.4.1.664.2.241.9.11.17 | ScalaradTAeScuSCADateTimeLastAutoSave | read-only | current | This read-only OID will return the ASCII date/time of the last SCA autosave operation, or an empty string if none. |
| 1.3.6.1.4.1.664.2.241.9.11.18 | ScalaradTAeScuSCADateTimeNextAutoSave | read-only | current | This read-only OID will return the ASCII date/time of the next SCA autosave operation, or an empty string if none. |
| 1.3.6.1.4.1.664.2.241.9.12 | NodeadTAeSCUSCARestoreMgmt | |||
| 1.3.6.1.4.1.664.2.241.9.12.1 | ScalaradTAeScuSCAoptRestoreESCU | read-write | current | This OID controls whether any eSCU-related provisions should be restored and is a master override for the restore of all eSCU-related provisions. Setting this … |
| 1.3.6.1.4.1.664.2.241.9.12.2 | ScalaradTAeScuSCAoptRestoreSCA | read-write | current | This OID controls whether SCA-related provisions should be restored on the eSCU. |
| 1.3.6.1.4.1.664.2.241.9.12.3 | ScalaradTAeScuSCAoptRestoreNetwork | read-write | current | This OID controls whether general IP network-related provisions should be restored on the eSCU. This would include such items as secondary telnet port numbers,… |
| 1.3.6.1.4.1.664.2.241.9.12.4 | ScalaradTAeScuSCAoptRestoreNetworkInterface | read-write | current | This OID controls whether IP network interface-related provisions should be restored on the eSCU. This would include such items as IP/netmask/gateway/default-r… |
| 1.3.6.1.4.1.664.2.241.9.12.5 | ScalaradTAeScuSCAoptRestoreSNMP | read-write | current | This OID controls whether SNMP-related provisions should be restored on the eSCU. |
| 1.3.6.1.4.1.664.2.241.9.12.6 | ScalaradTAeScuSCAoptRestoreSecurity | read-write | current | This OID controls whether security-system provisions should be restored on the eSCU. This would include such items as user account information. |
| 1.3.6.1.4.1.664.2.241.9.12.7 | ScalaradTAeScuSCAoptRestoreLineCard | read-write | current | This OID controls whether provisions should be restored to linecards and MUXs and is a master override for the restore of all Module-related provisions. Settin… |
| 1.3.6.1.4.1.664.2.241.9.12.8 | ScalaradTAeScuSCAoptRestoreInServiceLineCard | read-write | current | This OID controls whether provisions should be restored to in-service linecards and MUXs. |
| 1.3.6.1.4.1.664.2.241.9.12.9 | ScalaradTAeScuSCAoptRestoreEmptySlot | read-write | current | This OID controls whether provisions should be restored to empty slots. This operation is often called pre-provisioning. |
| 1.3.6.1.4.1.664.2.241.9.12.12 | ScalaradTAeScuSCAoptRestoreCardBitmask | read-write | current | SCA restore to linecard enable bitmask. This OID accesses a enable/disable bitmap indicating which slots should have their provision information restored durin… |
| 1.3.6.1.4.1.664.2.241.9.12.13 | ScalaradTAeScuSCADateTimeSaveInvoked | read-only | current | This read-only OID will return the ASCII date/time of the last manually-invoked SCA save operation, or an empty string if none. |
| 1.3.6.1.4.1.664.2.241.9.12.14 | ScalaradTAeScuSCACardsRestoredBitmask | read-only | current | This read-only OID will return a bitmask of cards restored. |
| 1.3.6.1.4.1.664.2.241.9.12.15 | ScalaradTAeScuSCACardsNotRestoredBitmask | read-only | current | This read-only OID will return a bitmask of cards not restored. |
| 1.3.6.1.4.1.664.2.241.9.12.16 | ScalaradTAeScuSCACardsExcludedBitmask | read-only | current | This read-only OID will return a bitmask of cards excluding from the SCA restore operation. |
| 1.3.6.1.4.1.664.2.241.9.12.17 | ScalaradTAeScuSCARestoreCardErrorsBitmask | read-only | current | This read-only OID will return a bitmask of cards with restore errors. |
| 1.3.6.1.4.1.664.2.241.14 | NodeadTAeSCUSystemLog | |||
| 1.3.6.1.4.1.664.2.241.14.3 | ScalaradTAeSCUSystemLogAlarm | read-write | current | Enable or disable System full alaram. |
| 1.3.6.1.4.1.664.2.241.14.5 | ScalaradTAeSCUSystemLogPercentFull | read-only | current | Percentage of System Log buffer used. When the System Log is full it will remove the oldest half of its entries. When the System log is 70% full, it will send … |
| 1.3.6.1.4.1.664.2.241.14.7 | ScalaradTAeSCUSystemLogCount | read-only | current | Number of entries in system log. |
| 1.3.6.1.4.1.664.2.241.14.8 | ScalaradTAeSCUSystemSummReport | read-write | current | Allows summary reports.. |
| 1.3.6.1.4.1.664.2.241.14.9 | ScalaradTAeSCUSystemEnableDetail | read-write | current | Enable or disable detail reports. |
| 1.3.6.1.4.1.664.2.241.14.10 | ScalaradTAeSCUSystemLogFailureDescription | read-only | current | An string description of a system log Failure. This OID is valid in a SNMP trap. |
| 1.3.6.1.4.1.664.2.241.14.15 | TableadTAeSCUSystemLogTable | not-accessible | current | The SCU System Log table. |
| 1.3.6.1.4.1.664.2.241.14.15.1 | RowadTAeSCUSystemLogEntry | not-accessible | current | An entry in the SCU System Log table. Readonly object. |
| 1.3.6.1.4.1.664.2.241.14.15.1.1 | ColumnadTAeSCUSystemLogIndex | read-only | current | An not-accessible index value. The contoller will not respond to this OID. |
| 1.3.6.1.4.1.664.2.241.14.15.1.5 | ColumnadTAeSCUSystemLogDescription | read-only | current | An string description of a system log entry. |
| 1.3.6.1.4.1.664.2.241.15 | NodeadTAeScuTL1ActivityLog | |||
| 1.3.6.1.4.1.664.2.241.15.2 | ScalaradTAeScuResetTL1Log | read-write | current | Reset TL1 Log. |
| 1.3.6.1.4.1.664.2.241.15.6 | TableadTAeScuTL1ActivityLogTable | not-accessible | current | The System TL1 Log table. |
| 1.3.6.1.4.1.664.2.241.15.6.1 | RowadTAeScuTL1ActivityLogEntry | not-accessible | current | An entry in the System TL1 Log table. Readonly object. |
| 1.3.6.1.4.1.664.2.241.15.6.1.1 | ColumnadTAeSCUTL1LogIndex | read-only | current | An Index value to the TL1 Log.. |
| 1.3.6.1.4.1.664.2.241.15.6.1.2 | ColumnadTAeScuTL1ActivityLogDescription | read-only | current | An string description of a system Tl1 log entry. This string contains the TL1 command and response. |