ADVA-FSP3000ALM-MIB
514 objects
Fiber monitoring system for P2P fiber optical networks.
Imported Objects
| ADVA-MIB | IdentityTranslation TrapAlarmSeverity TrapCounter |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-SMI | Counter64 enterprises Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2544 | NodeadvaMIB | |||
| 1.3.6.1.4.1.2544.1 | Nodeproducts | |||
| 1.3.6.1.4.1.2544.1.14 | Identityfsp3000alm | Fiber monitoring system for P2P fiber optical networks. | ||
| 1.3.6.1.4.1.2544.1.14.0 | Nodetrap | |||
| 1.3.6.1.4.1.2544.1.14.0.1 | NotificationalarmTempCPU | current | This trap is sent if tempCPU value crossed tresholdMaxTempCPU threshold. | |
| 1.3.6.1.4.1.2544.1.14.0.2 | NotificationalarmTempBoard1 | current | This trap is sent if tempBoard1 (CPU board) value crossed tresholdMaxTempBoard1 threshold. Not used on 16ALM-1650D. | |
| 1.3.6.1.4.1.2544.1.14.0.3 | NotificationalarmTempBoard2Low | current | This trap is sent if tempBoard2 (laser board) value crossed tresholdMinTempBoard2 threshold. | |
| 1.3.6.1.4.1.2544.1.14.0.4 | NotificationalarmTempBoard2High | current | This trap is sent if tempBoard2 (laser board) value crossed tresholdMaxTempBoard2 threshold. | |
| 1.3.6.1.4.1.2544.1.14.0.5 | NotificationalarmTempLaserLow | current | This trap is sent if tempLaser value crossed tresholdMinTempLaser threshold. Not used on 16ALM-1650D. | |
| 1.3.6.1.4.1.2544.1.14.0.6 | NotificationalarmTempLaserHigh | current | This trap is sent if tempLaser value crossed tresholdMaxTempLaser threshold. Not used on 16ALM-1650D. | |
| 1.3.6.1.4.1.2544.1.14.0.7 | NotificationalarmMonNotRunning | current | This trap is related with enabling/disabling monitoring function by user. The relevant alarm in alarmTable refering to this trap will be set/cleared. | |
| 1.3.6.1.4.1.2544.1.14.0.8 | NotificationalarmFpRunning | current | This trap is related with initiating/finishing fingerprint calculation. The relevant alarm in alarmTable refering to this trap will be set/cleared. Not used on… | |
| 1.3.6.1.4.1.2544.1.14.0.9 | NotificationalarmFaRunning | current | This trap is related with initiating/finishing fault analysis. The relevant alarm in alarmTable refering to this trap will be set/cleared. | |
| 1.3.6.1.4.1.2544.1.14.0.10 | NotificationalarmFpMissing | current | This trap is related with situation when fingerprint was not calculated for a port. The relevant alarm in alarmTable refering to this trap will be set/cleared. | |
| 1.3.6.1.4.1.2544.1.14.0.11 | NotificationalarmThresCrossedFast | current | This trap is sent if the absolute value of measurementLossDevFast exceeded portThresDeviationFast threshold. | |
| 1.3.6.1.4.1.2544.1.14.0.12 | NotificationalarmThresCrossedMedium | current | This trap is sent if the absolute value of measurementLossDevMedium exceeded portThresDeviationMedium threshold. | |
| 1.3.6.1.4.1.2544.1.14.0.13 | NotificationalarmThresCrossedSlow | current | This trap is sent if the absolute value of measurementLossDevSlow exceeded portThresDeviationSlow threshold. | |
| 1.3.6.1.4.1.2544.1.14.0.14 | NotificationalarmLinkBudgetExceeded | current | This trap is sent if measurementLossLinkLoss value exceeded portThresBudget threshold. | |
| 1.3.6.1.4.1.2544.1.14.0.15 | NotificationalarmLinkBudgetNearlyExceeded | current | This trap is sent if measurementLossLinkLoss value exceeded portThresCloseToBudget threshold. | |
| 1.3.6.1.4.1.2544.1.14.0.16 | NotificationalarmManagementState | current | This trap is sent each time when portAdminState is changed from/to mgt(4) value. | |
| 1.3.6.1.4.1.2544.1.14.0.17 | NotificationalarmDisabledState | current | This trap is sent each time when portAdminState is changed from/to dsbld(6) value. | |
| 1.3.6.1.4.1.2544.1.14.0.18 | NotificationstateChangedTrap | current | This trap is sent when an entity state is changed (OperState or AdminState). Additionally this trap will contain changed object: portOperState or portAdminState | |
| 1.3.6.1.4.1.2544.1.14.0.19 | NotificationobjectChangedTrap | current | This trap is sent when an object such as alarm severity or threshold is changed Additionally this trap will contain changed object, portAidString, aidString, i… | |
| 1.3.6.1.4.1.2544.1.14.0.20 | NotificationtrapsinkCreatedTrap | current | This trap is sent every time an new entry is added to the trapsinkTable or ipv6TrapsinkTable | |
| 1.3.6.1.4.1.2544.1.14.0.21 | NotificationtrapsinkDeletedTrap | current | This trap is sent every time an new entry is removed from the trapsinkTable or ipv6TrapsinkTable | |
| 1.3.6.1.4.1.2544.1.14.0.22 | Notificationtransient15MinMeasCollected | current | This trap is every time when all the measurement data for all the port are collected for selected period | |
| 1.3.6.1.4.1.2544.1.14.0.23 | Notificationtransient1DayMeasCollected | current | This trap is every time when all the measurement data for all the port are collected for selected period | |
| 1.3.6.1.4.1.2544.1.14.0.24 | NotificationtransientFpStarted | current | This trap is sent when fingerprint monitoring has started | |
| 1.3.6.1.4.1.2544.1.14.0.25 | NotificationtransientFpCompleted | current | This trap is sent when fingerprint monitoring has completed with success | |
| 1.3.6.1.4.1.2544.1.14.0.26 | NotificationtransientFpFailed | current | This trap is sent when fingerprint monitoring has ended with failure | |
| 1.3.6.1.4.1.2544.1.14.0.27 | NotificationtransientSwMgmtActionStarted | current | This trap is sent when any action related with Software Management is initiated. In case of file-transfer related operations it will contain softwareMgmtFileNa… | |
| 1.3.6.1.4.1.2544.1.14.0.28 | NotificationtransientSwMgmtActionCompleted | current | This trap is sent when any action related with Software Management is successfully completed. In case of file-transfer related operations it will contain softw… | |
| 1.3.6.1.4.1.2544.1.14.0.29 | NotificationtransientSwMgmtActionFailed | current | This trap is sent when any action related with Software Management failed. In case of file-transfer related operations it will contain softwareMgmtFileName var… | |
| 1.3.6.1.4.1.2544.1.14.0.30 | NotificationtransientDbMgmtActionStarted | current | This trap is sent when any action related with Database Management is initiated. In case of file-transfer related operations it will contain additionally datab… | |
| 1.3.6.1.4.1.2544.1.14.0.31 | NotificationtransientDbMgmtActionCompleted | current | This trap is sent when any action related with Database Management is successfully completed. In case of file-transfer related operations it will contain addit… | |
| 1.3.6.1.4.1.2544.1.14.0.32 | NotificationtransientDbMgmtActionFailed | current | This trap is sent when any action related with Database Management failed. In case of file-transfer related operations it will contain additionally databaseMgm… | |
| 1.3.6.1.4.1.2544.1.14.0.33 | NotificationalarmNtpServerUnreachable | current | Trap to be sent when NTP servers are unreachable. | |
| 1.3.6.1.4.1.2544.1.14.0.34 | NotificationtransientFpSaved | current | This trap is sent when a completed fingerprint measurement is saved as current fingerprint. | |
| 1.3.6.1.4.1.2544.1.14.0.35 | NotificationtransientMonStarted | current | This trap is sent when monitoring of the particular port was enabled. | |
| 1.3.6.1.4.1.2544.1.14.0.36 | NotificationtransientMonStopped | current | This trap is sent when monitoring of the particular port was diabled. | |
| 1.3.6.1.4.1.2544.1.14.0.37 | NotificationtransientOtdrMeasurementStarted | current | This trap is sent when manual OTDR measurement was intitiated. | |
| 1.3.6.1.4.1.2544.1.14.0.38 | NotificationtransientOtdrMeasurementCompleted | current | This trap is sent when manual OTDR measurement is completed. | |
| 1.3.6.1.4.1.2544.1.14.0.39 | NotificationtransientOtdrMeasurementFailed | current | This trap is sent when manual OTDR measurement failed. | |
| 1.3.6.1.4.1.2544.1.14.0.40 | NotificationtransientOtdrMeasurementSaved | current | This trap is sent when data of manual OTDR measurement was saved. | |
| 1.3.6.1.4.1.2544.1.14.0.41 | NotificationtransientFaStarted | current | This trap is sent when fault analysis in initiated. | |
| 1.3.6.1.4.1.2544.1.14.0.42 | NotificationtransientFaCompleted | current | This trap is sent when fault analysis is completed. | |
| 1.3.6.1.4.1.2544.1.14.0.43 | NotificationtransientFaFailed | current | This trap is sent when fault analysis is completed. | |
| 1.3.6.1.4.1.2544.1.14.0.44 | NotificationtransientFaSaved | current | This trap is sent when the data of a completed fault analysis was saved. | |
| 1.3.6.1.4.1.2544.1.14.0.45 | NotificationtransientInternalError | current | This trap is sent when some critical error happened which affects monitoring capabilities | |
| 1.3.6.1.4.1.2544.1.14.0.46 | NotificationalarmRebootRunning | current | This trap is to inform user that rebooting of system started | |
| 1.3.6.1.4.1.2544.1.14.0.47 | NotificationalarmWarmupRunning | current | This trap is sent when to inform a user about starting/finishing warming up process. | |
| 1.3.6.1.4.1.2544.1.14.0.48 | NotificationalarmBadSysStat | current | This trap is sent when some critical error happened due to hardware failure. | |
| 1.3.6.1.4.1.2544.1.14.0.49 | NotificationalarmWrongFWVersion | current | This trap is sent when alarm informing about the fact that firmware version is not up to date is raised/cleared. Not used on 16ALM-1650D. | |
| 1.3.6.1.4.1.2544.1.14.0.50 | NotificationalarmMonProcNotRunning | current | This trap is sent when some critical error happened which affects monitoring capabilities of the unit. | |
| 1.3.6.1.4.1.2544.1.14.0.51 | NotificationtransientFaDeleted | current | This trap is sent when fault analysis was deleted. | |
| 1.3.6.1.4.1.2544.1.14.0.52 | NotificationtransientOtdrMeasurementDeleted | current | This trap is sent when manual OTDR measurement was deleted. | |
| 1.3.6.1.4.1.2544.1.14.0.53 | NotificationtransientOtdrTraceMgmtActionStarted | current | This trap is sent when any action related with OTDR Trace Management is initiated. | |
| 1.3.6.1.4.1.2544.1.14.0.54 | NotificationtransientOtdrTraceMgmtActionCompleted | current | This trap is sent when any action related with OTDR Trace Management is successfully completed. | |
| 1.3.6.1.4.1.2544.1.14.0.55 | NotificationtransientOtdrTraceMgmtActionFailed | current | This trap is sent when any action related with OTDR Trace Management failed. | |
| 1.3.6.1.4.1.2544.1.14.0.56 | NotificationalarmAlmPackageMismatch | current | This trap is sent when softwareVersion and expectedSoftwareVersion values do not match and expectedSoftwareVersion value is not empty and operationMode is set … | |
| 1.3.6.1.4.1.2544.1.14.0.57 | NotificationalarmEmailNotifyThresCrossedFast | current | This trap is sent if the absolute value of measurementLossDevFast exceeded portThresDeviationFast threshold and the corresponding automatic fault analysis meas… | |
| 1.3.6.1.4.1.2544.1.14.0.58 | NotificationalarmEmailNotifyThresCrossedMedium | current | This trap is sent if the absolute value of measurementLossDevMedium exceeded portThresDeviationMedium threshold and the corresponding automatic fault analysis … | |
| 1.3.6.1.4.1.2544.1.14.0.59 | NotificationalarmEmailNotifyThresCrossedSlow | current | This trap is sent if the absolute value of measurementLossDevSlow exceeded portThresDeviationSlow threshold and the corresponding automatic fault analysis meas… | |
| 1.3.6.1.4.1.2544.1.14.0.60 | NotificationalarmEmailNotifyLinkBudgetExceeded | current | This trap is sent if measurementLossLinkLoss value exceeded portThresBudget threshold and the corresponding automatic fault analysis measurement has been compl… | |
| 1.3.6.1.4.1.2544.1.14.0.61 | NotificationalarmEmailNotifyLinkBudgetNearlyExceeded | current | This trap is sent if measurementLossLinkLoss value exceeded portThresCloseToBudget threshold and the corresponding automatic fault analysis measurement has bee… | |
| 1.3.6.1.4.1.2544.1.14.0.62 | NotificationauthenticationNotification | current | This trap is sent when authentication event happens. | |
| 1.3.6.1.4.1.2544.1.14.0.63 | NotificationauthenticationNotificationSummary | current | This trap is sent when authentication event happens more often than 5 times within 10 seconds. | |
| 1.3.6.1.4.1.2544.1.14.0.64 | NotificationmonitorPointCreated | current | This trap is sent when Monitor Point was created | |
| 1.3.6.1.4.1.2544.1.14.0.65 | NotificationmonitorPointDeleted | current | This trap is sent when Monitor Point was deleted | |
| 1.3.6.1.4.1.2544.1.14.0.66 | NotificationalarmLossDeviationHigh | current | This trap is sent if difference between monitorPointLossCurrentLoss and monitorPointLossFpLoss exceeded portMonitorThresDeviation. | |
| 1.3.6.1.4.1.2544.1.14.0.67 | NotificationalarmLossHigh | current | This trap is sent if monitorPointLossCurrentLoss value exceeded portMonitorThresLossBudget. | |
| 1.3.6.1.4.1.2544.1.14.0.68 | NotificationalarmRootLinkFault | current | PON: This trap is sent if alarmLossHigh or alarmLossDeviationHigh is present for all Monitor Points. PES: This trap is sent if the Last Reflection changes. | |
| 1.3.6.1.4.1.2544.1.14.0.69 | NotificationtransientResetMeansStarted | current | This trap is sent when reset mean value action has started | |
| 1.3.6.1.4.1.2544.1.14.0.70 | NotificationtransientResetMeansCompleted | current | This trap is sent when reset mean value action has completed with success | |
| 1.3.6.1.4.1.2544.1.14.0.71 | NotificationtransientResetMeansFailed | current | This trap is sent when reset mean value action has ended with failure | |
| 1.3.6.1.4.1.2544.1.14.0.72 | NotificationalarmTrafficOutage | current | This trap is sent when DWDM traffic on the specific port was not detected any longer | |
| 1.3.6.1.4.1.2544.1.14.0.73 | NotificationuserAdded | current | This trap is sent when user was added | |
| 1.3.6.1.4.1.2544.1.14.0.74 | NotificationuserDeleted | current | This trap is sent when user was deleted | |
| 1.3.6.1.4.1.2544.1.14.0.75 | NotificationcustomizedFpEventCreated | current | This trap is sent when a customized Fingerprint Event was created | |
| 1.3.6.1.4.1.2544.1.14.0.76 | NotificationcustomizedFpEventDeleted | current | This trap is sent when a customized Fingerprint Event was deleted | |
| 1.3.6.1.4.1.2544.1.14.0.77 | NotificationtransientExportMgmtActionStarted | current | This trap is sent when any action related with Export Management is initiated. In case of file-transfer related operations it will contain additionally exportM… | |
| 1.3.6.1.4.1.2544.1.14.0.78 | NotificationtransientExportMgmtActionCompleted | current | This trap is sent when any action related with Export Management is successfully completed. In case of file-transfer related operations it will contain additio… | |
| 1.3.6.1.4.1.2544.1.14.0.79 | NotificationtransientExportMgmtActionFailed | current | This trap is sent when any action related with Export Management failed. In case of file-transfer related operations it will contain additionally exportMgmtFil… | |
| 1.3.6.1.4.1.2544.1.14.0.80 | NotificationalarmSensor1High | current | This trap is sent if difference between monitorPointLossCurrentLoss and monitorPointLossFpLoss exceeded portMonitorSensor1Thres. | |
| 1.3.6.1.4.1.2544.1.14.0.81 | NotificationalarmSensor2High | current | This trap is sent if difference between monitorPointLossCurrentLoss and monitorPointLossFpLoss exceeded portMonitorSensor2Thres. | |
| 1.3.6.1.4.1.2544.1.14.0.82 | NotificationalarmEmailNotifyRootLinkFault | current | This trap is sent if alarmRootLinkFault is set and the corresponding automatic fault analysis measurement has been completed. alarmEmailNotifyCorrectedFaultPos… | |
| 1.3.6.1.4.1.2544.1.14.0.83 | NotificationtransientTimeChange | current | This trap is sent if a time step occured (manually or ntp) | |
| 1.3.6.1.4.1.2544.1.14.0.84 | NotificationalarmTopologyChanged | current | This trap is sent if the Link Topology has changed | |
| 1.3.6.1.4.1.2544.1.14.0.85 | NotificationalarmEmailNotifyLossDeviationHigh | current | This trap is sent if difference between monitorPointLossCurrentLoss and monitorPointLossFpLoss exceeded portMonitorThresDeviation and the corresponding automat… | |
| 1.3.6.1.4.1.2544.1.14.0.86 | NotificationalarmEmailNotifyLossHigh | current | This trap is sent if monitorPointLossCurrentLoss value exceeded portMonitorThresLossBudget and the corresponding automatic fault analysis measurement has been … | |
| 1.3.6.1.4.1.2544.1.14.0.87 | NotificationalarmEmailNotifySensor1High | current | This trap is sent if difference between monitorPointLossCurrentLoss and monitorPointLossFpLoss exceeded portMonitorSensor1Thres and the corresponding automatic… | |
| 1.3.6.1.4.1.2544.1.14.0.88 | NotificationalarmEmailNotifySensor2High | current | This trap is sent if difference between monitorPointLossCurrentLoss and monitorPointLossFpLoss exceeded portMonitorSensor2Thres and the corresponding automatic… | |
| 1.3.6.1.4.1.2544.1.14.1 | Nodealarm | |||
| 1.3.6.1.4.1.2544.1.14.1.1 | TablealarmTable | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.14.1.1.1 | RowalarmEntry | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.14.1.1.1.1 | ColumnalarmSource | not-accessible | current | Equals portId of the concerned port if the alarm is port-specific. Zero otherwise. |
| 1.3.6.1.4.1.2544.1.14.1.1.1.2 | ColumnalarmType | not-accessible | current | Type of alarm. |
| 1.3.6.1.4.1.2544.1.14.1.1.1.3 | ColumnalarmSeverity | read-only | current | Value of severity. |
| 1.3.6.1.4.1.2544.1.14.1.1.1.4 | ColumnalarmTimeStamp | read-only | current | Timestamp of alarm. |
| 1.3.6.1.4.1.2544.1.14.1.2 | TablealarmSeverityTable | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.14.1.2.1 | RowalarmSeverityEntry | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.14.1.2.1.2 | ColumnalarmSeverityType | not-accessible | current | Type of severity. |
| 1.3.6.1.4.1.2544.1.14.1.2.1.3 | ColumnalarmSeverityValue | read-write | current | Value of severity. |
| 1.3.6.1.4.1.2544.1.14.1.3 | TablealarmEmailNotifyTable | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.14.1.3.1 | RowalarmEmailNotifyEntry | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.14.1.3.1.1 | ColumnalarmEmailNotifyType | not-accessible | current | Type of alarm. |
| 1.3.6.1.4.1.2544.1.14.1.3.1.2 | ColumnalarmEmailNotifyExternalId | read-only | current | ExternalId of port. |
| 1.3.6.1.4.1.2544.1.14.1.3.1.3 | ColumnalarmEmailNotifyId | read-only | current | Id of alarm. |
| 1.3.6.1.4.1.2544.1.14.1.3.1.4 | ColumnalarmEmailNotifySeverity | read-only | current | Value of severity. |
| 1.3.6.1.4.1.2544.1.14.1.3.1.5 | ColumnalarmEmailNotifyTimeStamp | read-only | current | Timestamp of alarm creation. |
| 1.3.6.1.4.1.2544.1.14.1.3.1.6 | ColumnalarmEmailNotifyFaultPosition | read-only | current | Fault position in kilometers. |
| 1.3.6.1.4.1.2544.1.14.1.3.1.7 | ColumnalarmEmailNotifyFaultType | accessible-for-notify | current | Fault type of alarm. |
| 1.3.6.1.4.1.2544.1.14.1.3.1.8 | ColumnalarmEmailNotifyState | accessible-for-notify | current | State of alarm. |
| 1.3.6.1.4.1.2544.1.14.1.3.1.9 | ColumnalarmEmailNotifyEvent | accessible-for-notify | current | Alarm event. |
| 1.3.6.1.4.1.2544.1.14.1.3.1.10 | ColumnalarmEmailNotifyEventTimeStamp | accessible-for-notify | current | Timestamp of alarm event. |
| 1.3.6.1.4.1.2544.1.14.1.3.1.11 | ColumnalarmEmailNotifyFaultAnalysisReference | read-only | current | Fault analysis reference number. |
| 1.3.6.1.4.1.2544.1.14.1.3.1.12 | ColumnalarmEmailNotifyCorrectedFaultPos | read-only | current | Fault analysis corrected position. |
| 1.3.6.1.4.1.2544.1.14.1.4 | TablealarmDescriptionTable | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.14.1.4.1 | RowalarmDescriptionEntry | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.14.1.4.1.2 | ColumnalarmDescriptionName | read-only | current | Name of alarm. |
| 1.3.6.1.4.1.2544.1.14.2 | Nodedevice | |||
| 1.3.6.1.4.1.2544.1.14.2.1 | Nodeshelf | |||
| 1.3.6.1.4.1.2544.1.14.2.1.1 | ScalarshelfUnitName | read-only | current | Official Equipment Name |
| 1.3.6.1.4.1.2544.1.14.2.1.2 | ScalarfirmwarePackageRev | read-only | current | Firmware Package Revision Number |
| 1.3.6.1.4.1.2544.1.14.2.1.3 | ScalarhardwareRev | read-only | current | Equipment Revision Number |
| 1.3.6.1.4.1.2544.1.14.2.1.4 | ScalarfpgaRev | read-only | current | The active FPGA version on the device |
| 1.3.6.1.4.1.2544.1.14.2.1.5 | ScalarserialNumber | read-only | current | Equipment Serial Number |
| 1.3.6.1.4.1.2544.1.14.2.1.6 | ScalarpartNumber | read-only | current | Part Number |
| 1.3.6.1.4.1.2544.1.14.2.1.7 | ScalarcleiCode | read-only | current | Common Language Equipment Identifier |
| 1.3.6.1.4.1.2544.1.14.2.1.8 | ScalarvendorId | read-only | current | OEM Vendor Code |
| 1.3.6.1.4.1.2544.1.14.2.1.9 | ScalarinventoryType | read-only | current | Type of the physical entity |
| 1.3.6.1.4.1.2544.1.14.2.1.10 | ScalaruniversalSerialIdent | read-only | current | Universal Serial Identifier |
| 1.3.6.1.4.1.2544.1.14.2.1.11 | ScalartempCPU | read-only | current | Current CPU temperature (in 0.1 degree Celsius). |
| 1.3.6.1.4.1.2544.1.14.2.1.12 | ScalarthresholdMaxTempCPU | read-only | current | Upper threshold for CPU temperature. If tempCPU is higher than threshold, the system will send a trap. |
| 1.3.6.1.4.1.2544.1.14.2.1.13 | ScalartempBoard1 | read-only | current | Current temperature of the management board (in 0.1 degree Celsius). Not available on 16ALM-1650D. |
| 1.3.6.1.4.1.2544.1.14.2.1.14 | ScalarthresholdMaxTempBoard1 | read-only | current | Upper threshold for board temperature. If tempBoard is higher than threshold, the system will send a trap. Not available on 16ALM-1650D. |
| 1.3.6.1.4.1.2544.1.14.2.1.15 | ScalartempBoard2 | read-only | current | |
| 1.3.6.1.4.1.2544.1.14.2.1.16 | ScalarthresholdMinTempBoard2 | read-only | current | |
| 1.3.6.1.4.1.2544.1.14.2.1.17 | ScalarthresholdMaxTempBoard2 | read-only | current | |
| 1.3.6.1.4.1.2544.1.14.2.1.18 | ScalartempLaser | read-only | current | Not available on 16ALM-1650D. |
| 1.3.6.1.4.1.2544.1.14.2.1.19 | ScalarthresholdMinTempLaser | read-only | current | Not available on 16ALM-1650D. |
| 1.3.6.1.4.1.2544.1.14.2.1.20 | ScalarthresholdMaxTempLaser | read-only | current | Not available on 16ALM-1650D. |
| 1.3.6.1.4.1.2544.1.14.2.1.21 | ScalaraidString | read-only | current | Name of the device |
| 1.3.6.1.4.1.2544.1.14.2.1.22 | ScalarshelfName | read-write | current | Name of the device |
| 1.3.6.1.4.1.2544.1.14.2.2 | TableportTable | not-accessible | current | Table of optical ports. |
| 1.3.6.1.4.1.2544.1.14.2.2.1 | RowportEntry | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.14.2.2.1.1 | ColumnportId | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.14.2.2.1.2 | ColumnportAdminState | read-write | current | Administrative State of the port. Setting to mgt disables the service. It is, however, manadatory to set state to mgt to perform other measurement affecting ac… |
| 1.3.6.1.4.1.2544.1.14.2.2.1.3 | ColumnportOperState | read-only | current | Operational State of the port. The value of the port is set to anr if the at least one of the following alarms are set on this port: alarmMonNotRunning, alarmF… |
| 1.3.6.1.4.1.2544.1.14.2.2.1.4 | ColumnportName | read-write | current | Name of the link. |
| 1.3.6.1.4.1.2544.1.14.2.2.1.5 | ColumnportAidString | read-only | current | |
| 1.3.6.1.4.1.2544.1.14.2.2.1.6 | ColumnportRemark | read-write | current | Port remark. |
| 1.3.6.1.4.1.2544.1.14.2.2.1.7 | ColumnportFingerprintMode | read-only | current | Type of the current Fingerprint. |
| 1.3.6.1.4.1.2544.1.14.2.3 | NodemonitoringItems | |||
| 1.3.6.1.4.1.2544.1.14.2.3.1 | TablefeederLengthTable | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.14.2.3.1.1 | RowfeederLengthEntry | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.14.2.3.1.1.1 | ColumnfeederLength | read-write | current | Distance in decimeter up to the splitter. |
| 1.3.6.1.4.1.2544.1.14.2.3.2 | TablemonitorPointTable | not-accessible | current | Table of optical ports. |
| 1.3.6.1.4.1.2544.1.14.2.3.2.1 | RowmonitorPointEntry | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.14.2.3.2.1.1 | ColumnmpId | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.14.2.3.2.1.2 | ColumnmonitorPointPos | read-only | current | Position of the Monitor Point in decimeter. |
| 1.3.6.1.4.1.2544.1.14.2.3.2.1.3 | ColumnmonitorPointState | read-write | current | This variable is set to '1' when this Monitor Point is active. If this Monitor Point is inactive this variable is set to '0'. |
| 1.3.6.1.4.1.2544.1.14.2.3.2.1.4 | ColumnmonitorPointName | read-write | current | Name of the Monitor Point. |
| 1.3.6.1.4.1.2544.1.14.2.3.2.1.5 | ColumnmonitorPointAidString | read-only | current | |
| 1.3.6.1.4.1.2544.1.14.2.3.2.1.6 | ColumnmonitorPointRemark | read-write | current | Remark of the Monitor Point. |
| 1.3.6.1.4.1.2544.1.14.2.3.2.1.7 | ColumnmonitorPointExternalId | read-write | current | The externalId of the Monitor Point. |
| 1.3.6.1.4.1.2544.1.14.3 | Nodemeasurement | |||
| 1.3.6.1.4.1.2544.1.14.3.1 | TablemeasurementLossTable | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.14.3.1.1 | RowmeasurementLossEntry | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.14.3.1.1.1 | ColumnmeasurementLossIndex | read-only | current | |
| 1.3.6.1.4.1.2544.1.14.3.1.1.2 | ColumnmeasurementLossLinkLoss | read-only | current | Link loss at termination in tenth of dB. |
| 1.3.6.1.4.1.2544.1.14.3.1.1.3 | ColumnmeasurementLossLinkFaultLoc | read-only | current | Fault location in decimetres. If there is no current Fault Position the value is -1 |
| 1.3.6.1.4.1.2544.1.14.3.1.1.4 | ColumnmeasurementLossLinkFaultLocRes | read-only | current | Resolution of the fault location measurement in decimetres. |
| 1.3.6.1.4.1.2544.1.14.3.1.1.5 | ColumnmeasurementLossDevFast | read-only | current | |
| 1.3.6.1.4.1.2544.1.14.3.1.1.6 | ColumnmeasurementLossDevMedium | read-only | current | |
| 1.3.6.1.4.1.2544.1.14.3.1.1.7 | ColumnmeasurementLossDevSlow | read-only | current | |
| 1.3.6.1.4.1.2544.1.14.3.1.1.8 | ColumnmeasurementLossDataTimestamp | read-only | current | |
| 1.3.6.1.4.1.2544.1.14.3.4 | TablehistMeasLoss15MinTable | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.14.3.4.1 | RowhistMeasLoss15MinEntry | not-accessible | current | Entry of histMeasLoss15MinTable |
| 1.3.6.1.4.1.2544.1.14.3.4.1.1 | ColumnhistMeasLoss15MinNumber | not-accessible | current | A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently comple… |
| 1.3.6.1.4.1.2544.1.14.3.4.1.2 | ColumnhistMeasLoss15MinLow | read-only | current | Lowest link loss |
| 1.3.6.1.4.1.2544.1.14.3.4.1.3 | ColumnhistMeasLoss15MinMean | read-only | current | Mean link loss |
| 1.3.6.1.4.1.2544.1.14.3.4.1.4 | ColumnhistMeasLoss15MinHigh | read-only | current | Highest link loss |
| 1.3.6.1.4.1.2544.1.14.3.4.1.5 | ColumnhistMeasLoss15MinValidFlag | read-only | current | Valid Flag |
| 1.3.6.1.4.1.2544.1.14.3.4.1.6 | ColumnhistMeasLoss15MinTimeStamp | read-only | current | Timestamp |
| 1.3.6.1.4.1.2544.1.14.3.5 | TablehistMeasLoss1DayTable | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.14.3.5.1 | RowhistMeasLoss1DayEntry | not-accessible | current | Entry of histMeasLoss1DayTable |
| 1.3.6.1.4.1.2544.1.14.3.5.1.1 | ColumnhistMeasLoss1DayNumber | not-accessible | current | A number, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 1 day interva… |
| 1.3.6.1.4.1.2544.1.14.3.5.1.2 | ColumnhistMeasLoss1DayLow | read-only | current | Lowest link loss |
| 1.3.6.1.4.1.2544.1.14.3.5.1.3 | ColumnhistMeasLoss1DayMean | read-only | current | Mean link loss |
| 1.3.6.1.4.1.2544.1.14.3.5.1.4 | ColumnhistMeasLoss1DayHigh | read-only | current | Highest link loss |
| 1.3.6.1.4.1.2544.1.14.3.5.1.5 | ColumnhistMeasLoss1DayValidFlag | read-only | current | Valid Flag |
| 1.3.6.1.4.1.2544.1.14.3.5.1.6 | ColumnhistMeasLoss1DayTimeStamp | read-only | current | Timestamp |
| 1.3.6.1.4.1.2544.1.14.3.6 | TableportThresTable | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.14.3.6.1 | RowportThresEntry | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.14.3.6.1.2 | ColumnportThresDeviationFast | read-write | current | portThresDeviationFast |
| 1.3.6.1.4.1.2544.1.14.3.6.1.3 | ColumnportThresDeviationMedium | read-write | current | portThresDeviationMedium |
| 1.3.6.1.4.1.2544.1.14.3.6.1.4 | ColumnportThresDeviationSlow | read-write | current | portThresDeviationSlow |
| 1.3.6.1.4.1.2544.1.14.3.6.1.5 | ColumnportThresBudget | read-write | current | portThresBudget |
| 1.3.6.1.4.1.2544.1.14.3.6.1.6 | ColumnportThresCloseToBudget | read-write | current | portThresCloseToBudget |
| 1.3.6.1.4.1.2544.1.14.3.6.1.7 | ColumnportMonitorThresLossBudget | read-write | current | portMonitorThresLossBudget |
| 1.3.6.1.4.1.2544.1.14.3.6.1.8 | ColumnportMonitorThresDeviation | read-write | current | portMonitorThresDeviation |
| 1.3.6.1.4.1.2544.1.14.3.6.1.9 | ColumnportSensor1Thres | read-write | current | portSensor1Thres |
| 1.3.6.1.4.1.2544.1.14.3.6.1.10 | ColumnportSensor2Thres | read-write | current | portSensor2Thres |
| 1.3.6.1.4.1.2544.1.14.3.7 | TableportPeriodLossDevTable | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.14.3.7.1 | RowportPeriodLossDevEntry | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.14.3.7.1.1 | ColumnportPeriodLossDevFast | read-write | current | |
| 1.3.6.1.4.1.2544.1.14.3.7.1.2 | ColumnportPeriodLossDevMedium | read-write | current | |
| 1.3.6.1.4.1.2544.1.14.3.7.1.3 | ColumnportPeriodLossDevSlow | read-write | current | |
| 1.3.6.1.4.1.2544.1.14.3.8 | TablemeasurementFpTable | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.14.3.8.1 | RowmeasurementFpEntry | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.14.3.8.1.1 | ColumnmeasurementFpIndex | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.14.3.8.1.2 | ColumnmeasurementFpRefractiveIndex | read-only | current | Refractive index multiplied by 1000000. |
| 1.3.6.1.4.1.2544.1.14.3.8.1.3 | ColumnmeasurementFpExternalOffset | read-only | current | External offset length in meters. |
| 1.3.6.1.4.1.2544.1.14.3.8.1.4 | ColumnmeasurementFpCouplerLoss | read-only | current | Coupler loss in tenth of dB. |
| 1.3.6.1.4.1.2544.1.14.3.8.1.5 | ColumnmeasurementFpLinkLoss | read-only | current | Link loss at reflector in tenth of dB. |
| 1.3.6.1.4.1.2544.1.14.3.8.1.6 | ColumnmeasurementFpLineEndPos | read-only | current | Position of the reflector in decimetres. |
| 1.3.6.1.4.1.2544.1.14.3.8.1.7 | ColumnmeasurementFpDataTimestamp | read-only | current | |
| 1.3.6.1.4.1.2544.1.14.3.8.1.8 | ColumnmeasurementFpNumConnectors | read-only | current | Equals -2147483648 if loss guidance was not enabled during fingerprint creation. |
| 1.3.6.1.4.1.2544.1.14.3.8.1.9 | ColumnmeasurementFpNumSplices | read-only | current | Equals -2147483648 if loss guidance was not enabled during fingerprint creation. |
| 1.3.6.1.4.1.2544.1.14.3.8.1.10 | ColumnmeasurementFpMaxLaserPower | read-only | current | Maximal laser power in 0.01dBm. Only available on 16ALM-1650D. |
| 1.3.6.1.4.1.2544.1.14.3.8.1.11 | ColumnmeasurementFpFastMode | read-only | current | If this variable is 'enabled' faster OTDR measurements are activated with less accuracy. |
| 1.3.6.1.4.1.2544.1.14.3.8.1.12 | ColumnmeasurementFpMonitoringMode | read-only | current | Measurement method for monitoring. |
| 1.3.6.1.4.1.2544.1.14.3.8.1.13 | ColumnmeasurementFpTrafficDetected | read-only | current | This object is available if traffic check is enabled. |
| 1.3.6.1.4.1.2544.1.14.3.9 | TablemeasurementFaTable | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.14.3.9.1 | RowmeasurementFaEntry | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.14.3.9.1.1 | ColumnmeasurementFaIndex | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.14.3.9.1.2 | ColumnmeasurementFaLinkLoss | read-only | current | Link loss at reflector in tenth of dB. |
| 1.3.6.1.4.1.2544.1.14.3.9.1.3 | ColumnmeasurementFaFaultPos | read-only | current | Fault position in decimetres. |
| 1.3.6.1.4.1.2544.1.14.3.9.1.4 | ColumnmeasurementFaDeprecated | read-only | current | This variable is set to 'yes' when this Fault Analysis refers to old fingerprint, i.e. new finger print was generated after this Fault Analysis had been perfor… |
| 1.3.6.1.4.1.2544.1.14.3.9.1.5 | ColumnmeasurementFaDataTimestamp | read-only | current | |
| 1.3.6.1.4.1.2544.1.14.3.9.1.6 | ColumnmeasurementFaCorrectedFaultPos | read-only | current | Corrected fault position in decimetres. If no customized events were added this entry equals -2147483648. |
| 1.3.6.1.4.1.2544.1.14.3.10 | TablemeasurementOtdrTable | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.14.3.10.1 | RowmeasurementOtdrEntry | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.14.3.10.1.1 | ColumnmeasurementOtdrIndex | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.14.3.10.1.2 | ColumnmeasurementOtdrLength | read-only | current | Measurement length in meters. |
| 1.3.6.1.4.1.2544.1.14.3.10.1.3 | ColumnmeasurementOtdrExternalOffset | read-only | current | External offset length in meters. |
| 1.3.6.1.4.1.2544.1.14.3.10.1.4 | ColumnmeasurementOtdrRefractiveIndex | read-only | current | Refractive index multiplied by 1000000. |
| 1.3.6.1.4.1.2544.1.14.3.10.1.5 | ColumnmeasurementOtdrPowerLevel | read-only | current | Power level in 0.01dBm. Not available on 16ALM-1650D. |
| 1.3.6.1.4.1.2544.1.14.3.10.1.6 | ColumnmeasurementOtdrPulseWidth | read-only | current | Pulse width in ns. |
| 1.3.6.1.4.1.2544.1.14.3.10.1.7 | ColumnmeasurementOtdrAverageRate | read-only | current | Average rate (0=512,1=1024,2=2048,3=4096,4=8192,5=16384,6=32768,7=65536). Not available on 16ALM-1650D. |
| 1.3.6.1.4.1.2544.1.14.3.10.1.8 | ColumnmeasurementOtdrDataTimestamp | read-only | current | |
| 1.3.6.1.4.1.2544.1.14.3.10.1.9 | ColumnmeasurementOtdrMaxLaserPower | read-only | current | Maximal laser power in 0.01dBm. Not available on 16ALM. |
| 1.3.6.1.4.1.2544.1.14.3.10.1.10 | ColumnmeasurementOtdrLinkLength | read-only | current | Length of the optical link in meters. Not available on 16ALM. |
| 1.3.6.1.4.1.2544.1.14.3.10.1.11 | ColumnmeasurementOtdrMeasTime | read-only | current | Measurement time in seconds. Not available on 16ALM. |
| 1.3.6.1.4.1.2544.1.14.3.11 | TablemeasurementAutoFaTable | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.14.3.11.1 | RowmeasurementAutoFaEntry | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.14.3.11.1.1 | ColumnmeasurementAutoFaIndex | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.14.3.11.1.2 | ColumnmeasurementAutoFaReference | read-only | current | Fault analysis reference number. |
| 1.3.6.1.4.1.2544.1.14.3.11.1.3 | ColumnmeasurementAutoFaLinkLoss | read-only | current | Link loss at reflector in tenth of dB. |
| 1.3.6.1.4.1.2544.1.14.3.11.1.4 | ColumnmeasurementAutoFaFaultPos | read-only | current | Fault position in decimetres. |
| 1.3.6.1.4.1.2544.1.14.3.11.1.5 | ColumnmeasurementAutoFaDeprecated | read-only | current | This variable is set to 'yes' when this Fault Analysis refers to old fingerprint, i.e. new finger print was generated after this Fault Analysis had been perfor… |
| 1.3.6.1.4.1.2544.1.14.3.11.1.6 | ColumnmeasurementAutoFaDataTimestamp | read-only | current | |
| 1.3.6.1.4.1.2544.1.14.3.11.1.7 | ColumnmeasurementAutoFaCorrectedFaultPos | read-only | current | Corrected fault position in decimetres. If no customized events were added this entry equals -2147483648. |
| 1.3.6.1.4.1.2544.1.14.3.12 | TablemonitorPointLossTable | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.14.3.12.1 | RowmonitorPointLossEntry | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.14.3.12.1.1 | ColumnmonitorPointLossCurrentLoss | read-only | current | Current loss at monitor point in tenth of dB. |
| 1.3.6.1.4.1.2544.1.14.3.12.1.2 | ColumnmonitorPointLossFpLoss | read-only | current | Fingerprint loss at monitor point in tenth of dB. |
| 1.3.6.1.4.1.2544.1.14.3.12.1.3 | ColumnmonitorPointLossDataTimestamp | read-only | current | |
| 1.3.6.1.4.1.2544.1.14.3.13 | TablehistMonitorPointLoss15MinTable | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.14.3.13.1 | RowhistMonitorPointLoss15MinEntry | not-accessible | current | Entry of histMonitorPointLoss15MinTable |
| 1.3.6.1.4.1.2544.1.14.3.13.1.1 | ColumnhistMonitorPointLoss15MinNumber | not-accessible | current | A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently comple… |
| 1.3.6.1.4.1.2544.1.14.3.13.1.2 | ColumnhistMonitorPointLoss15MinLow | read-only | current | Lowest monitor point loss |
| 1.3.6.1.4.1.2544.1.14.3.13.1.3 | ColumnhistMonitorPointLoss15MinMean | read-only | current | Mean monitor point loss |
| 1.3.6.1.4.1.2544.1.14.3.13.1.4 | ColumnhistMonitorPointLoss15MinHigh | read-only | current | Highest monitor point loss |
| 1.3.6.1.4.1.2544.1.14.3.13.1.5 | ColumnhistMonitorPointLoss15MinValid | read-only | current | Valid Flag |
| 1.3.6.1.4.1.2544.1.14.3.13.1.6 | ColumnhistMonitorPointLoss15MinTimeStamp | read-only | current | Timestamp |
| 1.3.6.1.4.1.2544.1.14.3.14 | TablehistMonitorPointLoss1DayTable | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.14.3.14.1 | RowhistMonitorPointLoss1DayEntry | not-accessible | current | Entry of histMonitorPointLoss1DayTable |
| 1.3.6.1.4.1.2544.1.14.3.14.1.1 | ColumnhistMonitorPointLoss1DayNumber | not-accessible | current | A number, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 1 day interva… |
| 1.3.6.1.4.1.2544.1.14.3.14.1.2 | ColumnhistMonitorPointLoss1DayLow | read-only | current | Lowest monitor point loss |
| 1.3.6.1.4.1.2544.1.14.3.14.1.3 | ColumnhistMonitorPointLoss1DayMean | read-only | current | Mean monitor point loss |
| 1.3.6.1.4.1.2544.1.14.3.14.1.4 | ColumnhistMonitorPointLoss1DayHigh | read-only | current | Highest monitor point loss |
| 1.3.6.1.4.1.2544.1.14.3.14.1.5 | ColumnhistMonitorPointLoss1DayValid | read-only | current | Valid Flag |
| 1.3.6.1.4.1.2544.1.14.3.14.1.6 | ColumnhistMonitorPointLoss1DayTimeStamp | read-only | current | Timestamp |
| 1.3.6.1.4.1.2544.1.14.3.15 | TablemeasurementFpEventTable | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.14.3.15.1 | RowmeasurementFpEventEntry | not-accessible | current | Entry of measurementFpEventEntry |
| 1.3.6.1.4.1.2544.1.14.3.15.1.1 | ColumnmeasurementFpEventId | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.14.3.15.1.2 | ColumnmeasurementFpEventPosition | read-only | current | Position in decimeter. |
| 1.3.6.1.4.1.2544.1.14.3.15.1.3 | ColumnmeasurementFpEventReflectance | read-only | current | Reflectance in tenth of dB |
| 1.3.6.1.4.1.2544.1.14.3.15.1.4 | ColumnmeasurementFpEventAttenuation | read-only | current | Attenuation in tenth of dB |
| 1.3.6.1.4.1.2544.1.14.3.15.1.5 | ColumnmeasurementFpEventRemark | read-write | current | |
| 1.3.6.1.4.1.2544.1.14.3.16 | TablecustomizedFpEventTable | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.14.3.16.1 | RowcustomizedFpEventEntry | not-accessible | current | Entry of customizedFpEventEntry |
| 1.3.6.1.4.1.2544.1.14.3.16.1.1 | ColumncustomizedFpEventId | accessible-for-notify | current | |
| 1.3.6.1.4.1.2544.1.14.3.16.1.2 | ColumncustomizedFpEventRowStatus | read-create | current | The status of this conceptual row. To create a row in this table, set this object to createAndGo(4). To remove a row, set this object to destroy(6). |
| 1.3.6.1.4.1.2544.1.14.3.16.1.3 | ColumncustomizedFpEventCorrectedPosition | read-create | current | Corrected position in tenth of meter. |
| 1.3.6.1.4.1.2544.1.14.3.16.1.4 | ColumncustomizedFpEventRemark | read-create | current | Remark. |
| 1.3.6.1.4.1.2544.1.14.3.16.1.5 | ColumncustomizedFpEventOtdrId | read-only | current | OTDR fingerprint event ID. If no mapping between GIS and OTDR event was found this entry equals -2147483648. |
| 1.3.6.1.4.1.2544.1.14.3.16.1.6 | ColumncustomizedFpEventOtdrPosition | read-create | current | OTDR distance in tenth of meter is either filled when event mapped to a fingerprint event or potentially added when not mapped. |
| 1.3.6.1.4.1.2544.1.14.3.17 | TablemergedFpEventTable | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.14.3.17.1 | RowmergedFpEventEntry | not-accessible | current | Entry of mergedFpEventEntry |
| 1.3.6.1.4.1.2544.1.14.3.17.1.1 | ColumnmergedFpEventId | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.14.3.17.1.2 | ColumnmergedFpEventCustomizedEventId | read-only | current | Customized fingerprint event ID. |
| 1.3.6.1.4.1.2544.1.14.3.17.1.3 | ColumnmergedFpEventOtdrId | read-only | current | OTDR fingerprint event ID. |
| 1.3.6.1.4.1.2544.1.14.3.17.1.4 | ColumnmergedFpEventCorrectedPosition | read-only | current | Corrected position in tenth of meter. |
| 1.3.6.1.4.1.2544.1.14.3.17.1.5 | ColumnmergedFpEventOtdrPosition | read-only | current | OTDR distance in tenth of meter is either filled when event mapped to a fingerprint event or potentially added when not mapped. |
| 1.3.6.1.4.1.2544.1.14.3.17.1.6 | ColumnmergedFpEventRemark | read-only | current | Remark. |
| 1.3.6.1.4.1.2544.1.14.4 | NodeeventLogs | |||
| 1.3.6.1.4.1.2544.1.14.4.1 | ScalareventsLogged | read-only | current | This value is the sum of all notified events (trap counter). It is also the event number of the most recent event (eventLogIndex) found in the eventLog tables.… |
| 1.3.6.1.4.1.2544.1.14.4.2 | TableeventLogTable | not-accessible | current | Table of events issued by the NE's SNMP agent. The eventLog entries are read-only. |
| 1.3.6.1.4.1.2544.1.14.4.2.1 | RoweventLogEntry | not-accessible | current | Entries in the eventLog Table. Enterprise traps are always logged; logging of Generic traps is product specific. |
| 1.3.6.1.4.1.2544.1.14.4.2.1.1 | ColumneventLogIndex | not-accessible | current | The associated neEventsLogged counter for the logged event (trap). |
| 1.3.6.1.4.1.2544.1.14.4.2.1.2 | ColumneventLogTimeStamp | read-only | current | The NE Date and Time when the event (trap) occurred. This object is used in the trap varbind. |
| 1.3.6.1.4.1.2544.1.14.4.2.1.3 | ColumneventLogNotificationOID | read-only | current | The NOTIFICATION-TYPE object identifier of the event that occurred. The last part of the OID corresponds to the specific trap type value in the trap PDU. |
| 1.3.6.1.4.1.2544.1.14.4.2.1.4 | ColumneventLogIdentityTranslation | read-only | current | Translation of entPhysicalIndex/ifIndex or other identifier to a string used in the trap varbind following the timestamp varbind. |
| 1.3.6.1.4.1.2544.1.14.4.3 | TableeventLogVarTable | not-accessible | current | Table of variables corresponding to events logged in the eventLog. |
| 1.3.6.1.4.1.2544.1.14.4.3.1 | RoweventLogVarEntry | not-accessible | current | Entries in the eventLogVar Table. An entry appears in this table for each variable in the varbind list of an entry in the eventLogTable. For an event having no… |
| 1.3.6.1.4.1.2544.1.14.4.3.1.1 | ColumneventLogVarIndex | not-accessible | current | A monotonically increasing integer, starting at 1 for a given eventLogIndex, for indexing a variable contained in the varbind list of a logged event. |
| 1.3.6.1.4.1.2544.1.14.4.3.1.2 | ColumneventLogVarId | read-only | current | The object identifier of the variable in the varbind list. |
| 1.3.6.1.4.1.2544.1.14.4.3.1.3 | ColumneventLogVarType | read-only | current | The type of variable. One and only one of the value objects that follow must be instantiated, based on this type. The used types depend on the enterprise traps… |
| 1.3.6.1.4.1.2544.1.14.4.3.1.4 | ColumneventLogVarInteger32Val | read-only | current | The value when eventLogVarType is 'integer32'. Integer32 is also used to represent INTEGER types. Otherwise, 0 is returned. |
| 1.3.6.1.4.1.2544.1.14.4.3.1.5 | ColumneventLogVarIpAddressVal | read-only | current | The value when eventLogVarType is 'ipAddress'. Otherwise, an empty address is returned. |
| 1.3.6.1.4.1.2544.1.14.4.3.1.6 | ColumneventLogVarOctetStringVal | read-only | current | The value when eventLogVarType is 'octetString'. OctetString is used for all string types, including DisplayString, SnmpAdminString and DateAndTime. Otherwise,… |
| 1.3.6.1.4.1.2544.1.14.4.3.1.7 | ColumneventLogVarOidVal | read-only | current | The value when eventLogVarType is 'objectId'. Otherwise, an objectId { 0.0 } is returned. |
| 1.3.6.1.4.1.2544.1.14.4.3.1.8 | ColumneventLogVarCounter64Val | read-only | current | The value when eventLogVarType is 'counter64'. |
| 1.3.6.1.4.1.2544.1.14.4.3.1.10 | ColumneventLogVarUnsigned32Val | read-only | current | The value when eventLogVarType is 'unsigned32'. |
| 1.3.6.1.4.1.2544.1.14.4.4 | TabletrapsinkTable | not-accessible | current | Table of Trapsinks. A trapsinkTable entry can be created, deleted or modified via the SNMP interface for a specific address and port. |
| 1.3.6.1.4.1.2544.1.14.4.4.1 | RowtrapsinkEntry | not-accessible | current | Entries in the Trapsink Table. Entries are created and deleted using the trapsinkRowStatus object. The maximum of rows in this table is product specific. |
| 1.3.6.1.4.1.2544.1.14.4.4.1.1 | ColumntrapsinkAddress | accessible-for-notify | current | IP Address of the Management System which should receive SNMP Traps. |
| 1.3.6.1.4.1.2544.1.14.4.4.1.2 | ColumntrapsinkPort | not-accessible | current | The port number where the specified trap sink will receive SNMP traps. |
| 1.3.6.1.4.1.2544.1.14.4.4.1.3 | ColumntrapsinkCommunity | read-create | current | Community String which is sent with an SNMP Trap to the Management Station. The default is 'public'. |
| 1.3.6.1.4.1.2544.1.14.4.4.1.4 | ColumntrapsinkRowStatus | read-create | current | The status of this conceptual row. To create a row in this table, set this object to createAndGo(4). To remove a row, set this object to destroy(6). |
| 1.3.6.1.4.1.2544.1.14.4.4.1.5 | ColumntrapsinkVersion | read-create | current | The default is v2(2). |
| 1.3.6.1.4.1.2544.1.14.4.4.1.6 | ColumntrapsinkUserName | read-create | current | A human readable string representing the name of the user. |
| 1.3.6.1.4.1.2544.1.14.4.5 | Tableipv6TrapsinkTable | not-accessible | current | Table of IPv6 Trapsinks. A ipv6TrapsinkTable entry can be created, deleted or modified via the SNMP interface for a specific address and port. |
| 1.3.6.1.4.1.2544.1.14.4.5.1 | Rowipv6TrapsinkEntry | not-accessible | current | Entries in the IPv6 Trapsink Table. Entries are created and deleted using the ipv6TrapsinkRowStatus object. The maximum of rows in this table is product specif… |
| 1.3.6.1.4.1.2544.1.14.4.5.1.1 | Columnipv6TrapsinkId | accessible-for-notify | current | |
| 1.3.6.1.4.1.2544.1.14.4.5.1.2 | Columnipv6TrapsinkAddress | read-create | current | IPv6 Address of the Management System which should receive SNMP Traps. |
| 1.3.6.1.4.1.2544.1.14.4.5.1.3 | Columnipv6TrapsinkPort | read-create | current | The port number where the specified trap sink will receive SNMP traps. |
| 1.3.6.1.4.1.2544.1.14.4.5.1.4 | Columnipv6TrapsinkCommunity | read-create | current | Community String which is sent with an SNMP Trap to the Management Station. The default is 'public'. |
| 1.3.6.1.4.1.2544.1.14.4.5.1.5 | Columnipv6TrapsinkRowStatus | read-create | current | The status of this conceptual row. To create a row in this table, set this object to createAndGo(4). To remove a row, set this object to destroy(6). |
| 1.3.6.1.4.1.2544.1.14.4.5.1.6 | Columnipv6TrapsinkVersion | read-create | current | The default is v2(2). |
| 1.3.6.1.4.1.2544.1.14.4.5.1.7 | Columnipv6TrapsinkUserName | read-create | current | A human readable string representing the name of the user. |
| 1.3.6.1.4.1.2544.1.14.4.6 | NodesysLogRecipients | |||
| 1.3.6.1.4.1.2544.1.14.4.6.1 | ScalarsysLogRecipient1Address | read-write | current | An IPv4/IPv6 address of one syslog server. |
| 1.3.6.1.4.1.2544.1.14.4.6.2 | ScalarsysLogRecipient2Address | read-write | current | An IPv4/IPv6 address of one syslog server. |
| 1.3.6.1.4.1.2544.1.14.4.6.3 | ScalarsysLogRecipient3Address | read-write | current | An IPv4/IPv6 address of one syslog server. |
| 1.3.6.1.4.1.2544.1.14.5 | Nodesystem | |||
| 1.3.6.1.4.1.2544.1.14.5.1 | Nodeinformation | |||
| 1.3.6.1.4.1.2544.1.14.5.1.1 | ScalarsoftwareVersion | read-only | current | Reports the running software version on the device |
| 1.3.6.1.4.1.2544.1.14.5.1.2 | ScalarlocalDateAndTime | read-only | current | Reports the current local time on the device. |
| 1.3.6.1.4.1.2544.1.14.5.1.3 | ScalarreleaseNumber | read-only | current | The release number of the product. It will have the following format: XXYYZZ. For example, release version 1.2.1 will be identified in the following way:'10201… |
| 1.3.6.1.4.1.2544.1.14.5.1.4 | ScalarexpectedSoftwareVersion | read-write | current | Value set by System Controller when this unit is attached to it. The value must match the softwareVersion value. In case values do not match, then trap alarmAl… |
| 1.3.6.1.4.1.2544.1.14.5.2 | NodeipSettings | |||
| 1.3.6.1.4.1.2544.1.14.5.2.1 | ScalaripAddress | read-write | current | IP address of the system (IPv4). Changes to IP Settings should be made in one SET request. |
| 1.3.6.1.4.1.2544.1.14.5.2.2 | ScalarsubnetMask | read-write | current | Subnet mask. Changes to IP Settings should be made in one SET request. |
| 1.3.6.1.4.1.2544.1.14.5.2.3 | Scalargateway | read-write | current | Gateway. Changes to IP Settings should be made in one SET request. |
| 1.3.6.1.4.1.2544.1.14.5.2.4 | Scalardns1 | read-write | current | DNS server 1. The address '0.0.0.0' may be used to remove an entry. Changes to IP Settings should be made in one SET request. Overall a maximum of 2 DNS Server… |
| 1.3.6.1.4.1.2544.1.14.5.2.5 | Scalardns2 | read-write | current | DNS server 2. The address '0.0.0.0' may be used to remove an entry. Changes to IP Settings should be made in one SET request. Overall a maximum of 2 DNS Server… |
| 1.3.6.1.4.1.2544.1.14.5.2.6 | Scalardhcp | read-write | current | Dynamic Host Configuration Protocol (DHCP) configuration. Changes to IP Settings should be made in one SET request but if you enable DHCP only this value and I… |
| 1.3.6.1.4.1.2544.1.14.5.2.7 | Scalaripv6Address | read-write | current | IPv6 address of the system. Changes to IP Settings should be made in one SET request but IPv6 Address can be configured independently. |
| 1.3.6.1.4.1.2544.1.14.5.2.8 | Scalaripv6Dns1 | read-write | current | IPv6 DNS server 1. The address '::' may be used to remove an entry. Changes to IP Settings should be made in one SET request. Overall a maximum of 2 DNS Server… |
| 1.3.6.1.4.1.2544.1.14.5.2.9 | Scalaripv6Dns2 | read-write | current | IPv6 DNS server 2. The address '::' may be used to remove an entry. Changes to IP Settings should be made in one SET request. Overall a maximum of 2 DNS Server… |
| 1.3.6.1.4.1.2544.1.14.5.3 | NodesoftwareMgmt | |||
| 1.3.6.1.4.1.2544.1.14.5.3.1 | TablesoftwareMgmtFileTable | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.14.5.3.1.1 | RowsoftwareMgmtFileEntry | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.14.5.3.1.1.1 | ColumnsoftwareMgmtFileIndex | not-accessible | current | Index |
| 1.3.6.1.4.1.2544.1.14.5.3.1.1.2 | ColumnsoftwareMgmtFileSize | read-only | current | Size of File |
| 1.3.6.1.4.1.2544.1.14.5.3.1.1.3 | ColumnsoftwareMgmtFileCreationTime | read-only | current | Creation Time |
| 1.3.6.1.4.1.2544.1.14.5.3.1.1.4 | ColumnsoftwareMgmtFileVersion | read-only | current | General Release Issue Number of software |
| 1.3.6.1.4.1.2544.1.14.5.3.1.1.5 | ColumnsoftwareMgmtFileFileName | read-only | current | File Name |
| 1.3.6.1.4.1.2544.1.14.5.3.1.1.6 | ColumnsoftwareMgmtFileRowStatus | read-write | current | The status of this row. Only active(1) and destroy(6) values are supported. New row is created when a new DB file is generated by backup action or downloaded t… |
| 1.3.6.1.4.1.2544.1.14.5.3.2 | ScalarsoftwareMgmtRequest | read-write | current | Set request to initiate software management related action |
| 1.3.6.1.4.1.2544.1.14.5.3.3 | ScalarsoftwareMgmtState | read-only | current | The current status of the SW upgrade process. When failure is set then softwareMgmtLastError is applicable. |
| 1.3.6.1.4.1.2544.1.14.5.3.4 | ScalarsoftwareMgmtLastError | read-only | current | The latest failure in the software upgrade process. Applicable only when softwareMgmtState is set to 'failure'. NOTE: All failures that are caused by malfuncti… |
| 1.3.6.1.4.1.2544.1.14.5.3.5 | ScalarsoftwareMgmtDatabaseUsage | read-write | current | Options defining which database will be used after upgrade/reboot. When storage is selected then softwareMgmtDatabaseFileName must be set |
| 1.3.6.1.4.1.2544.1.14.5.3.6 | ScalarsoftwareMgmtDatabaseFileName | read-write | current | DB filename located in the storage which will be used after SW installation when softwareMgmtDatabaseUsage is set to storage(2) |
| 1.3.6.1.4.1.2544.1.14.5.3.7 | ScalarsoftwareMgmtServerAddress | read-write | current | The IP address of the external FTP/SCP server. |
| 1.3.6.1.4.1.2544.1.14.5.3.8 | ScalarsoftwareMgmtServerLogin | read-write | current | The login name on the external FTP/SCP server. |
| 1.3.6.1.4.1.2544.1.14.5.3.9 | ScalarsoftwareMgmtServerPasswd | read-write | current | The password on the external FTP/SCP server. Read requests on this object will return a zero-length string. |
| 1.3.6.1.4.1.2544.1.14.5.3.10 | ScalarsoftwareMgmtServerDirectory | read-write | current | The SW file location (path) on the external FTP/SCP server. |
| 1.3.6.1.4.1.2544.1.14.5.3.11 | ScalarsoftwareMgmtFileName | read-write | current | The SW file name (without path) on the external FTP/SCP server or the name of the file which has been downloaded to the NE. |
| 1.3.6.1.4.1.2544.1.14.5.3.12 | ScalarsoftwareMgmtTransferProtocol | read-write | current | The transfer protocol to be used. |
| 1.3.6.1.4.1.2544.1.14.5.3.13 | ScalarsoftwareMgmtFtpPort | read-write | current | The TCP port number of FTP server used for file transfer. Default value is 21. |
| 1.3.6.1.4.1.2544.1.14.5.3.14 | ScalarsoftwareMgmtActionProgress | read-only | current | Operational progress in % i.e. file transfer |
| 1.3.6.1.4.1.2544.1.14.5.3.15 | ScalarsoftwareMgmtIpv6Address | read-write | current | The IPv6 address of the external FTP/SCP server. |
| 1.3.6.1.4.1.2544.1.14.5.4 | NodedatabaseMgmt | |||
| 1.3.6.1.4.1.2544.1.14.5.4.1 | TabledatabaseMgmtFileTable | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.14.5.4.1.1 | RowdatabaseMgmtFileEntry | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.14.5.4.1.1.1 | ColumndatabaseMgmtFileIndex | not-accessible | current | Index |
| 1.3.6.1.4.1.2544.1.14.5.4.1.1.2 | ColumndatabaseMgmtFileSize | read-only | current | Size of File |
| 1.3.6.1.4.1.2544.1.14.5.4.1.1.3 | ColumndatabaseMgmtFileCreationTime | read-only | current | Creation Time |
| 1.3.6.1.4.1.2544.1.14.5.4.1.1.4 | ColumndatabaseMgmtFileVersion | read-only | current | General Release Issue Number of software |
| 1.3.6.1.4.1.2544.1.14.5.4.1.1.5 | ColumndatabaseMgmtFileFileName | read-only | current | File Name |
| 1.3.6.1.4.1.2544.1.14.5.4.1.1.6 | ColumndatabaseMgmtFileRowStatus | read-write | current | The status of this row. Only active(1) and destroy(6) values are supported. New row is created when a new software image file downloaded to the storage. To rem… |
| 1.3.6.1.4.1.2544.1.14.5.4.2 | ScalardatabaseMgmtRequest | read-write | current | Set request to initiate software management related action |
| 1.3.6.1.4.1.2544.1.14.5.4.3 | ScalardatabaseMgmtState | read-only | current | The current status of the backup/restore DB process. When failure is set then databaseMgmtLastError is applicable. |
| 1.3.6.1.4.1.2544.1.14.5.4.4 | ScalardatabaseMgmtLastError | read-only | current | The latest failure of the backup/restore DB process. Applicable only when databaseMgmtState is set to 'failure'. NOTE: All failures that are caused by malfunct… |
| 1.3.6.1.4.1.2544.1.14.5.4.5 | ScalardatabaseMgmtServerAddress | read-write | current | The IP address of the external FTP/SCP server. |
| 1.3.6.1.4.1.2544.1.14.5.4.6 | ScalardatabaseMgmtServerLogin | read-write | current | The login name on the external FTP/SCP server. |
| 1.3.6.1.4.1.2544.1.14.5.4.7 | ScalardatabaseMgmtServerPasswd | read-write | current | The password on the external FTP/SCP server. Read requests on this object will return a zero-length string. |
| 1.3.6.1.4.1.2544.1.14.5.4.8 | ScalardatabaseMgmtServerDirectory | read-write | current | The file location (path) on the external FTP/SCP server. |
| 1.3.6.1.4.1.2544.1.14.5.4.9 | ScalardatabaseMgmtFileName | read-write | current | The file name (without path and either without file name extension or with .ADB extension) on the external FTP/SCP server or the name of the file which has bee… |
| 1.3.6.1.4.1.2544.1.14.5.4.10 | ScalardatabaseMgmtTransferProtocol | read-write | current | The transfer protocol to be used. |
| 1.3.6.1.4.1.2544.1.14.5.4.11 | ScalardatabaseMgmtFtpPort | read-write | current | The TCP port number of the FTP server used for file transfer. Default value is 21. |
| 1.3.6.1.4.1.2544.1.14.5.4.12 | ScalardatabaseMgmtActionProgress | read-only | current | Operational progress in % i.e. file transfer |
| 1.3.6.1.4.1.2544.1.14.5.4.13 | ScalardatabaseMgmtIpv6Address | read-write | current | The IPv6 address of the external FTP/SCP server. |
| 1.3.6.1.4.1.2544.1.14.5.5 | NodentpMgmt | |||
| 1.3.6.1.4.1.2544.1.14.5.5.1 | ScalarntpClientConfig | read-write | current | NTP client configuration. |
| 1.3.6.1.4.1.2544.1.14.5.5.2 | ScalarntpServerName | read-write | current | Address of first NTP Server. |
| 1.3.6.1.4.1.2544.1.14.5.5.3 | ScalarntpServerName2 | read-write | current | Address of second NTP Server. |
| 1.3.6.1.4.1.2544.1.14.5.5.4 | ScalarntpServerName3 | read-write | current | Address of second NTP Server. |
| 1.3.6.1.4.1.2544.1.14.5.5.5 | ScalarntpTimeChangeReason | accessible-for-notify | current | Reason of Time Change (manual, ntp) |
| 1.3.6.1.4.1.2544.1.14.5.6 | NodegeneralSettings | |||
| 1.3.6.1.4.1.2544.1.14.5.6.1 | ScalaroperationMode | read-write | current | Mode of operation. Switching between versions affects the available functionality of NE (e.g. user management). Switching between the modes is not service affe… |
| 1.3.6.1.4.1.2544.1.14.5.6.2 | ScalarhttpsPort | read-write | current | Https Port for webgui access |
| 1.3.6.1.4.1.2544.1.14.5.7 | NodeemailNotifySettings | |||
| 1.3.6.1.4.1.2544.1.14.5.7.1 | ScalaremailNotifyConfig | read-write | current | Email functionality configuration. |
| 1.3.6.1.4.1.2544.1.14.5.7.2 | ScalarsmtpServerName | read-write | current | Name or IP Address (IPv4 or IPv6) of the SMTP server. |
| 1.3.6.1.4.1.2544.1.14.5.7.3 | ScalarsmtpServerPort | read-write | current | Port of the SMTP server. |
| 1.3.6.1.4.1.2544.1.14.5.7.4 | ScalarsmtpServerConnectionSecurity | read-write | current | Security type for the connection to the SMTP server. |
| 1.3.6.1.4.1.2544.1.14.5.7.5 | ScalarsmtpServerAuthConfig | read-write | current | Configuration of authentication with SMTP server. If set from noAuth(1) to auth(2) then smtpServerAccount and smtpServerPasswd have to be given in the same SET… |
| 1.3.6.1.4.1.2544.1.14.5.7.6 | ScalarsmtpServerAccount | read-write | current | Account used for authentication with SMTP server. |
| 1.3.6.1.4.1.2544.1.14.5.7.7 | ScalarsmtpServerPasswd | read-write | current | Password used for authentication with SMTP server. Read requests on this object will return a zero-length string. |
| 1.3.6.1.4.1.2544.1.14.5.7.8 | TableemailRecipientTable | not-accessible | current | Table of email recipients. |
| 1.3.6.1.4.1.2544.1.14.5.7.8.1 | RowemailRecipientEntry | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.14.5.7.8.1.1 | ColumnemailRecipientId | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.14.5.7.8.1.2 | ColumnemailRecipientAddress | read-create | current | An email address. |
| 1.3.6.1.4.1.2544.1.14.5.7.8.1.3 | ColumnemailRecipientType | read-create | current | The default value is to(1). |
| 1.3.6.1.4.1.2544.1.14.5.7.8.1.4 | ColumnemailRecipientRowStatus | read-create | current | The status of this conceptual row. To create a row in this table, set this object to createAndGo(4). To remove a row, set this object to destroy(6). |
| 1.3.6.1.4.1.2544.1.14.5.7.8.1.5 | ColumnemailRecipientFormat | read-create | current | The email format. You can choose either XML or the human readable email text format. The default value is xml(1) |
| 1.3.6.1.4.1.2544.1.14.5.7.8.1.6 | ColumnemailRecipientMinSeverity | read-create | current | The minimum severity of alarms that are sent to the recipient. The default value is low(1) |
| 1.3.6.1.4.1.2544.1.14.5.7.8.1.7 | ColumnemailRecipientAttachment | read-create | current | Attach trace in sor format. The default value is no(1) |
| 1.3.6.1.4.1.2544.1.14.5.7.9 | TableexternalIdTable | not-accessible | current | Table defining the mapping of portIds to externalIds. |
| 1.3.6.1.4.1.2544.1.14.5.7.9.1 | RowexternalIdEntry | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.14.5.7.9.1.1 | ColumnexternalId | read-write | current | The externalId for the corresponding port. |
| 1.3.6.1.4.1.2544.1.14.5.7.10 | ScalarsmtpSenderAddress | read-write | current | Sender Address. |
| 1.3.6.1.4.1.2544.1.14.5.7.11 | ScalarsmtpExtendedHello | read-write | current | EHLO (Extended Hello) or HELO (Hello) identifies the server initiating the connection. |
| 1.3.6.1.4.1.2544.1.14.5.8 | NodeadvaSecurity | |||
| 1.3.6.1.4.1.2544.1.14.5.8.1 | ScalarauthTrapUserName | accessible-for-notify | current | The name string for user authentication purposes. |
| 1.3.6.1.4.1.2544.1.14.5.8.2 | ScalarauthTrapLctIp | accessible-for-notify | current | IP address of LCT used in NE access. |
| 1.3.6.1.4.1.2544.1.14.5.8.3 | ScalarauthTrapStatus | accessible-for-notify | current | Indication whether security operation was successful/unsuccessful. |
| 1.3.6.1.4.1.2544.1.14.5.8.4 | ScalarauthTrapSessionId | accessible-for-notify | current | Session name used in NE access. |
| 1.3.6.1.4.1.2544.1.14.5.8.5 | ScalarauthTrapProtocol | accessible-for-notify | current | Protocol type used in NE access. |
| 1.3.6.1.4.1.2544.1.14.5.8.6 | ScalarauthTrapSuccessfulAuthCount | accessible-for-notify | current | Number of successful authentications. |
| 1.3.6.1.4.1.2544.1.14.5.8.7 | ScalarauthTrapUnsuccessfulAuthCount | accessible-for-notify | current | Number of unsuccessful authentications. |
| 1.3.6.1.4.1.2544.1.14.5.8.8 | ScalarauthTrapLogoutCount | accessible-for-notify | current | Number of logouts. |
| 1.3.6.1.4.1.2544.1.14.5.8.9 | ScalarauthTrapLctIpv6 | accessible-for-notify | current | IPv6 address of LCT used in NE access. |
| 1.3.6.1.4.1.2544.1.14.5.9 | NodelossGuidance | |||
| 1.3.6.1.4.1.2544.1.14.5.9.1 | ScalarlossGuidanceConfig | read-write | current | |
| 1.3.6.1.4.1.2544.1.14.5.9.2 | ScalarminLoss | read-write | current | Default value is 20. In tenth of dB. |
| 1.3.6.1.4.1.2544.1.14.5.9.3 | ScalaralwDev | read-write | current | Default value is 10. In tenth of dB. |
| 1.3.6.1.4.1.2544.1.14.5.9.4 | ScalarlossKm | read-write | current | Default value is 29. In hundredth of dB. |
| 1.3.6.1.4.1.2544.1.14.5.9.5 | ScalarlossConnectors | read-write | current | Default value is 5. In tenth of dB. |
| 1.3.6.1.4.1.2544.1.14.5.9.6 | ScalarlossSplices | read-write | current | Default value is 1. In tenth of dB. |
| 1.3.6.1.4.1.2544.1.14.5.9.7 | ScalarnumConnectors | read-write | current | Default value is 2. |
| 1.3.6.1.4.1.2544.1.14.5.9.8 | ScalarnumSplices | read-write | current | Default value is 2. |
| 1.3.6.1.4.1.2544.1.14.5.10 | NodeuserManagement | |||
| 1.3.6.1.4.1.2544.1.14.5.10.1 | TableuserManagementTable | not-accessible | current | userManagementTable |
| 1.3.6.1.4.1.2544.1.14.5.10.1.1 | RowuserManagementEntry | not-accessible | current | Entry of userManagementTable |
| 1.3.6.1.4.1.2544.1.14.5.10.1.1.1 | ColumnuserManagementRowStatus | read-create | current | RowStatus |
| 1.3.6.1.4.1.2544.1.14.5.10.1.1.2 | ColumnuserManagementUsername | read-create | current | The name string for user authentication purposes |
| 1.3.6.1.4.1.2544.1.14.5.10.1.1.3 | ColumnuserManagementEmailAddress | read-create | current | An email address |
| 1.3.6.1.4.1.2544.1.14.5.10.1.1.4 | ColumnuserManagementPrivilegeLevel | read-create | current | |
| 1.3.6.1.4.1.2544.1.14.5.10.1.1.5 | ColumnuserManagementSecurityLevel | read-create | current | |
| 1.3.6.1.4.1.2544.1.14.5.10.1.1.6 | ColumnuserManagementAuthPrivKey | read-create | current | A human readable string representing the current or new password for user account. Users with administrator privileges can use this object to set the password … |
| 1.3.6.1.4.1.2544.1.14.5.10.1.1.7 | ColumnuserManagementAuthPrivKeyOld | read-create | current | A human readable string representing the old password for user account. This object should be used only for password change procedure. |
| 1.3.6.1.4.1.2544.1.14.5.10.1.1.8 | ColumnuserManagementUdpSessionStatus | read-only | current | UDP-based User Session Status |
| 1.3.6.1.4.1.2544.1.14.5.11 | NodeexportMgmt | |||
| 1.3.6.1.4.1.2544.1.14.5.11.1 | ScalarexportMgmtRequest | read-write | current | Set request to initiate software management related action |
| 1.3.6.1.4.1.2544.1.14.5.11.2 | ScalarexportMgmtState | read-only | current | The current status of the export process. When failure is set then databaseMgmtLastError is applicable. |
| 1.3.6.1.4.1.2544.1.14.5.11.3 | ScalarexportMgmtLastError | read-only | current | The latest failure of the export process. Applicable only when exportMgmtLastError is set to 'failure'. NOTE: All failures that are caused by malfunctioning ha… |
| 1.3.6.1.4.1.2544.1.14.5.11.4 | ScalarexportMgmtServerAddress | read-write | current | The IP address of the external FTP/SCP server. |
| 1.3.6.1.4.1.2544.1.14.5.11.5 | ScalarexportMgmtServerLogin | read-write | current | The login name on the external FTP/SCP server. |
| 1.3.6.1.4.1.2544.1.14.5.11.6 | ScalarexportMgmtServerPasswd | read-write | current | The password on the external FTP/SCP server. Read requests on this object will return a zero-length string. |
| 1.3.6.1.4.1.2544.1.14.5.11.7 | ScalarexportMgmtServerDirectory | read-write | current | The file location (path) on the external FTP/SCP server. |
| 1.3.6.1.4.1.2544.1.14.5.11.8 | ScalarexportMgmtFileName | read-write | current | The file name (without path and either without file name extension) on the external FTP/SCP server or the name of the file which has been downloaded to the NE. |
| 1.3.6.1.4.1.2544.1.14.5.11.9 | ScalarexportMgmtTransferProtocol | read-write | current | The transfer protocol to be used. |
| 1.3.6.1.4.1.2544.1.14.5.11.10 | ScalarexportMgmtFtpPort | read-write | current | The TCP port number of the FTP server used for file transfer. Default value is 21. |
| 1.3.6.1.4.1.2544.1.14.5.11.11 | ScalarexportMgmtActionProgress | read-only | current | Operational progress in % i.e. file transfer |
| 1.3.6.1.4.1.2544.1.14.5.11.12 | ScalarexportMgmtIpv6Address | read-write | current | The IPv6 address of the external FTP/SCP server. |
| 1.3.6.1.4.1.2544.1.14.5.12 | NodebidirSettings | |||
| 1.3.6.1.4.1.2544.1.14.5.12.1 | ScalarbidirSettingsTimeSlotConfig | read-write | current | This value selects the system-wide configuration about the number of time slots and the time slot used by this ALM unit. numSlots3unitSlot2 (32) means three ti… |
| 1.3.6.1.4.1.2544.1.14.6 | Nodemaintain | |||
| 1.3.6.1.4.1.2544.1.14.6.1 | TablemaintainTable | not-accessible | current | Table of maintenance actions of monitor ports. |
| 1.3.6.1.4.1.2544.1.14.6.1.1 | RowmaintainEntry | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.14.6.1.1.1 | ColumnmaintainOperationRequest | read-write | current | Set request to initiate OTDR measurement. It can be performed only if portAdminState is in Mgt state except of runOtdrMeasurement (3), runFaultAnalysis (4) and… |
| 1.3.6.1.4.1.2544.1.14.6.1.1.2 | ColumnmaintainOperationRefractiveIndex | read-write | current | Refractive index multiplied by 1000000. Parameter must be provided for Fingerprint generation or OTDR measurement. |
| 1.3.6.1.4.1.2544.1.14.6.1.1.3 | ColumnmaintainOperationExternalOffset | read-write | current | External offset length in meters. Parameter must be provided for Fingerprint generation or OTDR measurement. |
| 1.3.6.1.4.1.2544.1.14.6.1.1.4 | ColumnmaintainOperationCouplerLoss | read-write | current | Coupler loss in tenth of dB. Parameter must be provided for Fingerprint generation. |
| 1.3.6.1.4.1.2544.1.14.6.1.1.5 | ColumnmaintainOperationOtdrLength | read-write | current | Measurement length in meters. Parameter must be provided for OTDR measurement. On 16ALM the allowed range is 100..35000. |
| 1.3.6.1.4.1.2544.1.14.6.1.1.6 | ColumnmaintainOperationOtdrPowerLevel | read-write | current | Power level in 0.01dBm. Parameter must be provided for OTDR measurement. Not available on 16ALM-1650D. |
| 1.3.6.1.4.1.2544.1.14.6.1.1.7 | ColumnmaintainOperationOtdrPulseWidth | read-write | current | Pulse width in ns. Parameter must be provided for OTDR measurement. On 16ALM the allowed range is 25..1000. |
| 1.3.6.1.4.1.2544.1.14.6.1.1.8 | ColumnmaintainOperationOtdrAverageRate | read-write | current | Average rate (0=512,1=1024,2=2048,3=4096,4=8192,5=16384,6=32768,7=65536). Parameter must be provided for OTDR measurement. Not available on 16ALM-1650D. |
| 1.3.6.1.4.1.2544.1.14.6.1.1.9 | ColumnmaintainOperationState | read-only | current | The current status of a measurement. When failure is set then maintainOperationLastError is applicable. |
| 1.3.6.1.4.1.2544.1.14.6.1.1.10 | ColumnmaintainOperationLastError | read-only | current | The latest failure of the maintain operation action. Applicable only when maintainOperationState is set to 'failure'. |
| 1.3.6.1.4.1.2544.1.14.6.1.1.11 | ColumnmaintainOperationNumConnectors | read-write | current | Default value is taken from system.lossGuidance |
| 1.3.6.1.4.1.2544.1.14.6.1.1.12 | ColumnmaintainOperationNumSplices | read-write | current | Default value is taken from system.lossGuidance |
| 1.3.6.1.4.1.2544.1.14.6.1.1.13 | ColumnmaintainOperationMaxLaserPower | read-write | current | Maximal laser power used for Fingerprint generation or OTDR measurement in 0.01dBm. Parameter must be provided for Fingerprint generation or OTDR measurement. … |
| 1.3.6.1.4.1.2544.1.14.6.1.1.14 | ColumnmaintainOperationOtdrLinkLength | read-write | current | Length of the optical link in meters. Parameter must be provided for OTDR measurement (max. 200000 meters) and fingerprint without reflector (max. 300000 meter… |
| 1.3.6.1.4.1.2544.1.14.6.1.1.15 | ColumnmaintainOperationOtdrMeasTime | read-write | current | Measurement time in seconds. Parameter must be provided for OTDR measurement. Not available on 16ALM. |
| 1.3.6.1.4.1.2544.1.14.6.1.1.16 | ColumnmaintainOperationDwdmMode | read-write | current | This variable is set to 'enabled' to allow DWDM measurements else only standard non DWDM measurements can be done. |
| 1.3.6.1.4.1.2544.1.14.6.1.1.17 | ColumnmaintainOperationLossCalculationPoint | read-write | current | Loss between the origin of the optical link and the loss calculation point is used for the bidirectional measurements or other measurements without reflector. … |
| 1.3.6.1.4.1.2544.1.14.6.1.1.18 | ColumnmaintainOperationFastMode | read-write | current | This variable is set to 'enabled' to activate faster OTDR measurements with less accuracy. |
| 1.3.6.1.4.1.2544.1.14.6.1.1.19 | ColumnmaintainOperationMonitoringMode | read-write | current | This variables decides which measurements method will be used for monitoring. |
| 1.3.6.1.4.1.2544.1.14.6.1.1.20 | ColumnmaintainOperationExpectedLoss | read-write | current | Expected loss in tenth of dB. Between 5 and 35 db. Parameter maintainOperationLossCalculationPoint must be set to 0 for it to be used. |
| 1.3.6.1.4.1.2544.1.14.7 | NodeotdrTraceMgmt | |||
| 1.3.6.1.4.1.2544.1.14.7.1 | TableotdrTraceMgmtTable | not-accessible | current | Table of trace management of monitor ports. |
| 1.3.6.1.4.1.2544.1.14.7.1.1 | RowotdrTraceMgmtEntry | not-accessible | current | |
| 1.3.6.1.4.1.2544.1.14.7.1.1.1 | ColumnotdrTraceMgmtRequest | read-write | current | Set request to initiate software management related action |
| 1.3.6.1.4.1.2544.1.14.7.1.1.2 | ColumnotdrTraceMgmtState | read-only | current | The current status of the export/upload of OTDR traces. When failure is set then otdrTraceMgmtLastError is applicable. |
| 1.3.6.1.4.1.2544.1.14.7.1.1.3 | ColumnotdrTraceMgmtLastError | read-only | current | The latest failure of the export/upload of OTDR traces process. Applicable only when otdrTraceMgmtState is set to 'failure'. NOTE: All failures that are caused… |
| 1.3.6.1.4.1.2544.1.14.7.1.1.4 | ColumnotdrTraceMgmtServerAddress | read-write | current | The IP address of the external FTP/SCP server. |
| 1.3.6.1.4.1.2544.1.14.7.1.1.5 | ColumnotdrTraceMgmtServerLogin | read-write | current | The login name on the external FTP/SCP server. |
| 1.3.6.1.4.1.2544.1.14.7.1.1.6 | ColumnotdrTraceMgmtServerPasswd | read-write | current | The password on the external FTP/SCP server. Read requests on this object will return a zero-length string. |
| 1.3.6.1.4.1.2544.1.14.7.1.1.7 | ColumnotdrTraceMgmtServerDirectory | read-write | current | The OTDR trace destination location (path) on the external FTP/SCP server. |
| 1.3.6.1.4.1.2544.1.14.7.1.1.8 | ColumnotdrTraceMgmtFileName | read-write | current | Target File Name of the trace without extension. Extension is either 'sor' or 'csv'. Depends on the selected OTDR Trace Management Request |
| 1.3.6.1.4.1.2544.1.14.7.1.1.9 | ColumnotdrTraceMgmtTransferProtocol | read-write | current | The transfer protocol to be used. |
| 1.3.6.1.4.1.2544.1.14.7.1.1.10 | ColumnotdrTraceMgmtFtpPort | read-write | current | The TCP port number of the FTP server used for file transfer. Default value is 21. |
| 1.3.6.1.4.1.2544.1.14.7.1.1.11 | ColumnotdrTraceMgmtActionProgress | read-only | current | Operational progress in % i.e. file transfer |
| 1.3.6.1.4.1.2544.1.14.7.1.1.12 | ColumnotdrTraceMgmtAutoFaReference | read-write | current | Fault Analysis reference number. A value of 0 means the latest auto-generated fault analysis is exported. |
| 1.3.6.1.4.1.2544.1.14.7.1.1.13 | ColumnotdrTraceMgmtIpv6Address | read-write | current | The IPv6 address of the external FTP/SCP server. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Fsp3000almAlarmListType | INTEGER { alarmTempCPU(1), alarmTempBoard1(2), alarmTempBoard2Low(3), alarmTempBoard2High(4), alarmTempLaserLow(5), alarmTempLaserHigh(6), alarmMonNotRunning(7), alarmFpRunning(8), alarmFaRunning(9), alarmFpMissing(10), alarmThresCrossedFast(11), alarmThresCrossedMedium(12), alarmThresCrossedSlow(13), alarmLinkBudgetExceeded(14), alarmLinkBudgetNearlyExceeded(15), alarmManagementState(16), alarmDisabledState(17), stateChangedTrap(18), objectChangedTrap(19), trapsinkCreatedTrap(20), trapsinkDeletedTrap(21), transient15MinMeasCollected(22), transient1DayMeasCollected(23), transientFpStarted(24), transientFpCompleted(25), transientFpFailed(26), transientSwMgmtActionStarted(27), transientSwMgmtActionCompleted(28), transientSwMgmtActionFailed(29), transientDbMgmtActionStarted(30), transientDbMgmtActionCompleted(31), transientDbMgmtActionFailed(32), alarmNtpServerUnreachable(33), transientFpSaved(34), transientMonStarted(35), transientMonStopped(36), transientOtdrMeasurementStarted(37), transientOtdrMeasurementCompleted(38), transientOtdrMeasurementFailed(39), transientOtdrMeasurementSaved(40), transientFaStarted(41), transientFaCompleted(42), transientFaFailed(43), transientFaSaved(44), transientInternalError(45), alarmRebootRunning(46), alarmWarmupRunning(47), alarmBadSysStat(48), alarmWrongFWVersion(49), alarmMonProcNotRunning(50), transientFaDeleted(51), transientOtdrMeasurementDeleted(52), transientOtdrTraceMgmtActionStarted(53), transientOtdrTraceMgmtActionCompleted(54), transientOtdrTraceMgmtActionFailed(55), alarmAlmPackageMismatch(56), alarmEmailNotifyThresCrossedFast(57), alarmEmailNotifyThresCrossedMedium(58), alarmEmailNotifyThresCrossedSlow(59), alarmEmailNotifyLinkBudgetExceeded(60), alarmEmailNotifyLinkBudgetNearlyExceeded(61), authenticationNotification(62), authenticationNotificationSummary(63), monitorPointCreated(64), monitorPointDeleted(65), alarmLossDeviationHigh(66), alarmLossHigh(67), alarmRootLinkFault(68), transientResetMeansStarted(69), transientResetMeansCompleted(70), transientResetMeansFailed(71), alarmTrafficOutage(72), userAdded(73), userDeleted(74), customizedFpEventCreated(75), customizedFpEventDeleted(76), transientExportMgmtActionStarted(77), transientExportMgmtActionCompleted(78), transientExportMgmtActionFailed(79), alarmSensor1High(80), alarmSensor2High(81), alarmEmailNotifyRootLinkFault(82), transientTimeChange(83), alarmTopologyChanged(84), alarmEmailNotifyLossDeviationHigh(85), alarmEmailNotifyLossHigh(86), alarmEmailNotifySensor1High(87), alarmEmailNotifySensor2High(88) } | current |