ADVA-FSPR7-MODULE-ENCRYPTION-MIB
154 objects
This is a MIB definition for ADVA AG Optical Networking module encryption management.
Imported Objects
| ADVA-FSPR7-MIB | entityEqptClassName entityEqptExtNo entityEqptPortNo entityEqptShelfNo entityEqptSlotNo entityFacilityClassName entityFacilityExtNo entityFacilityPortNo entityFacilityShelfNo entityFacilitySlotNo |
| ADVA-MIB | EntityIndex entityIndex fspR7 |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.2544.1.11.5 | IdentitymoduleEncryptionMIB | This is a MIB definition for ADVA AG Optical Networking module encryption management. | ||
| 1.3.6.1.4.1.2544.1.11.5.1 | NodeencryptionMIB | |||
| 1.3.6.1.4.1.2544.1.11.5.1.1 | NodeencryptionMIBConformance | |||
| 1.3.6.1.4.1.2544.1.11.5.1.1.1 | NodeencryptionMIBCompliances | |||
| 1.3.6.1.4.1.2544.1.11.5.1.1.1.1 | ComplianceencryptionMIBCompliance | current | The compliance statement for entities implementing the ADVA FspR7 Module Encryption MIB. | |
| 1.3.6.1.4.1.2544.1.11.5.1.1.2 | NodeencryptionMIBGroups | |||
| 1.3.6.1.4.1.2544.1.11.5.1.1.2.1 | GroupencryptionMIBGroup | current | A list of objects used for configuration of an encryption functionality on port and module level. | |
| 1.3.6.1.4.1.2544.1.11.5.1.2 | NodemoduleEncryptionObjects | |||
| 1.3.6.1.4.1.2544.1.11.5.1.2.1 | ScalarcryptoOfficerPassword | read-write | current | This object must be present in every set-request regarding encryption functionality. |
| 1.3.6.1.4.1.2544.1.11.5.1.2.2 | ScalarcryptoOfficerPasswordError | read-only | current | Last error related to set-request perform on that table. |
| 1.3.6.1.4.1.2544.1.11.5.1.2.3 | ScalarcryptoOfficerPasswordReqId | read-only | current | Set-Request id for which cryptoOfficerPasswordError contains value. |
| 1.3.6.1.4.1.2544.1.11.5.1.2.10 | TablecryptoModuleConfigTable | not-accessible | current | This table contains encryption-related writeable parameters defined per module. |
| 1.3.6.1.4.1.2544.1.11.5.1.2.10.1 | RowcryptoModuleConfigEntry | not-accessible | current | Every row of this table represents an encryption-capable module. |
| 1.3.6.1.4.1.2544.1.11.5.1.2.10.1.1 | ColumncryptoModuleConfigIndex | not-accessible | current | Address of an encryption capable module. |
| 1.3.6.1.4.1.2544.1.11.5.1.2.10.1.2 | ColumncryptoModuleConfigCryptoOfficerPassword | read-write | current | The current Crypto Officer password. It may be only modified, but cannot be read. Read attempt of this object will result with noSuchName error. |
| 1.3.6.1.4.1.2544.1.11.5.1.2.10.1.3 | ColumncryptoModuleConfigResetToFactory | read-write | current | Executes 'reset to factory' action. |
| 1.3.6.1.4.1.2544.1.11.5.1.2.10.1.4 | ColumncryptoModuleConfigFirmwareUpdateState | read-write | current | Determines if it is allowed for a module to perform firmware upgrade. |
| 1.3.6.1.4.1.2544.1.11.5.1.2.10.1.5 | ColumncryptoModuleConfigFirmwareVersion | read-write | current | Firmware package version designated for an upgrade. |
| 1.3.6.1.4.1.2544.1.11.5.1.2.10.1.6 | ColumncryptoModuleConfigSelfTestOperation | read-write | current | Starts self-tests. |
| 1.3.6.1.4.1.2544.1.11.5.1.2.11 | TablecryptoModuleStatusTable | not-accessible | current | This table contains encryption-related readable parameters defined per module. |
| 1.3.6.1.4.1.2544.1.11.5.1.2.11.1 | RowcryptoModuleStatusEntry | not-accessible | current | Every row of this table represents an encryption-capable module. |
| 1.3.6.1.4.1.2544.1.11.5.1.2.11.1.1 | ColumncryptoModuleStatusIndex | not-accessible | current | Address of an encryption capable module. |
| 1.3.6.1.4.1.2544.1.11.5.1.2.11.1.2 | ColumncryptoModuleStatusFailureLoginCount | read-only | current | Number of unsuccessful Crypto Officer log-in attempts. |
| 1.3.6.1.4.1.2544.1.11.5.1.2.11.1.3 | ColumncryptoModuleStatusSuccessfulLoginDateAndTime | read-only | current | The date and time of a last successful Crypto Officer login. |
| 1.3.6.1.4.1.2544.1.11.5.1.2.11.1.4 | ColumncryptoModuleStatusUnsuccessfulLoginDateAndTime | read-only | current | The date and time of a last unsuccessful Crypto Officer login. |
| 1.3.6.1.4.1.2544.1.11.5.1.2.11.1.5 | ColumncryptoModuleStatusResetToFactoryCapability | read-only | current | The status of possibility to perform Reset To Factory operation. If disable(2) then cryptoModuleConfigResetToFactory cannot be used, otherwise operation will f… |
| 1.3.6.1.4.1.2544.1.11.5.1.2.20 | TablecryptoModuleTable | not-accessible | current | This table contains encryption-related parameters defined per module. |
| 1.3.6.1.4.1.2544.1.11.5.1.2.20.1 | RowcryptoModuleEntry | not-accessible | current | Every row of this table represents an encryption-capable module. |
| 1.3.6.1.4.1.2544.1.11.5.1.2.20.1.1 | ColumncryptoModuleCryptoOfficerPassword | read-write | current | The current Crypto Officer password. It may be only modified, but cannot be read. Read attempt of this object will result with noSuchName error. |
| 1.3.6.1.4.1.2544.1.11.5.1.2.20.1.2 | ColumncryptoModuleResetToFactory | read-write | current | Executes 'reset to factory' action. |
| 1.3.6.1.4.1.2544.1.11.5.1.2.20.1.3 | ColumncryptoModuleFirmwareUpdateState | read-write | current | Determines if it is allowed for a module to perform firmware upgrade. |
| 1.3.6.1.4.1.2544.1.11.5.1.2.20.1.4 | ColumncryptoModuleFirmwareVersion | read-write | current | Firmware package version designated for an upgrade. |
| 1.3.6.1.4.1.2544.1.11.5.1.2.20.1.5 | ColumncryptoModuleSelfTestOperation | read-write | current | Starts self-tests. |
| 1.3.6.1.4.1.2544.1.11.5.1.2.20.1.6 | ColumncryptoModuleFailureLoginCount | read-only | current | Number of unsuccessful Crypto Officer log-in attempts. |
| 1.3.6.1.4.1.2544.1.11.5.1.2.20.1.7 | ColumncryptoModuleSuccessfulLoginDateAndTime | read-only | current | The date and time of a last successful Crypto Officer login. |
| 1.3.6.1.4.1.2544.1.11.5.1.2.20.1.8 | ColumncryptoModuleUnsuccessfulLoginDateAndTime | read-only | current | The date and time of a last unsuccessful Crypto Officer login. |
| 1.3.6.1.4.1.2544.1.11.5.1.2.21 | TablecryptoModuleCapTable | not-accessible | current | This table contains encryption-related parameters defined per module. |
| 1.3.6.1.4.1.2544.1.11.5.1.2.21.1 | RowcryptoModuleCapEntry | not-accessible | current | Every row of this table represents an encryption-capable module. |
| 1.3.6.1.4.1.2544.1.11.5.1.2.21.1.1 | ColumncryptoModuleCapCryptoOfficerPassword | read-only | current | The current Crypto Officer password. It may be only modified, but cannot be read. Read attempt of this object will result with noSuchName error. |
| 1.3.6.1.4.1.2544.1.11.5.1.2.21.1.2 | ColumncryptoModuleCapResetToFactory | read-only | current | Executes 'reset to factory' action. |
| 1.3.6.1.4.1.2544.1.11.5.1.2.21.1.3 | ColumncryptoModuleCapFirmwareUpdateState | read-only | current | Determines if it is allowed for a module to perform firmware upgrade. |
| 1.3.6.1.4.1.2544.1.11.5.1.2.21.1.4 | ColumncryptoModuleCapFirmwareVersion | read-only | current | Firmware package version designated for an upgrade. |
| 1.3.6.1.4.1.2544.1.11.5.1.2.21.1.5 | ColumncryptoModuleCapSelfTestOperation | read-only | current | Starts self-tests. |
| 1.3.6.1.4.1.2544.1.11.5.1.3 | NodeportEncryptionObjects | |||
| 1.3.6.1.4.1.2544.1.11.5.1.3.12 | TablecryptoPortConfigTable | not-accessible | current | This table contains encryption-related writeable parameters defined per port. |
| 1.3.6.1.4.1.2544.1.11.5.1.3.12.1 | RowcryptoPortConfigEntry | not-accessible | current | Every row of this table represents an encryption-capable port. |
| 1.3.6.1.4.1.2544.1.11.5.1.3.12.1.1 | ColumncryptoPortConfigIndex | not-accessible | current | Address of an encryption capable port. |
| 1.3.6.1.4.1.2544.1.11.5.1.3.12.1.2 | ColumncryptoPortConfigAuthKey | read-write | current | Encryption password being an input to generate an authentication key used to traffic encryption between ports. This object can be write only. Read attempt will… |
| 1.3.6.1.4.1.2544.1.11.5.1.3.12.1.3 | ColumncryptoPortConfigAuthKeyLifeTime | read-write | current | Determines a life period of an introduced authentication key for a traffic encryption. |
| 1.3.6.1.4.1.2544.1.11.5.1.3.12.1.4 | ColumncryptoPortConfigEncryptionOffState | read-write | current | Enable/disable possibility of using encryption switch. This is an additional trigger required to make a transition into transparent mode in two steps. |
| 1.3.6.1.4.1.2544.1.11.5.1.3.12.1.5 | ColumncryptoPortConfigEncryptionOff | read-write | current | Disable/enable encryption switch. |
| 1.3.6.1.4.1.2544.1.11.5.1.3.12.1.6 | ColumncryptoPortConfigForceKeyExchange | read-write | current | Force key exchange. |
| 1.3.6.1.4.1.2544.1.11.5.1.3.12.1.7 | ColumncryptoPortConfigKeyExchangeForcedClear | read-write | current | Clears on demand the alarmEncryptionPortKeyExchangeForced condition. |
| 1.3.6.1.4.1.2544.1.11.5.1.3.13 | TablecryptoPortStatusTable | not-accessible | current | This table contains encryption-related readable parameters defined per port. |
| 1.3.6.1.4.1.2544.1.11.5.1.3.13.1 | RowcryptoPortStatusEntry | not-accessible | current | Every row of this table represents an encryption-capable port. |
| 1.3.6.1.4.1.2544.1.11.5.1.3.13.1.1 | ColumncryptoPortStatusIndex | not-accessible | current | Address of an encryption capable module. |
| 1.3.6.1.4.1.2544.1.11.5.1.3.13.1.2 | ColumncryptoPortStatusEncryptionOffTimeRemaining | read-only | current | Informs about amount of minutes remaining to restore traffic encryption. |
| 1.3.6.1.4.1.2544.1.11.5.1.3.13.1.3 | ColumncryptoPortStatusFailureKeyExchangeCount | read-only | current | Numbers of unsuccessful encryption key exchanges since the successful one. |
| 1.3.6.1.4.1.2544.1.11.5.1.3.13.1.4 | ColumncryptoPortStatusSuccessfulKeyExchangeDateAndTime | read-only | current | The date and time of a recent successful encryption key exchange. |
| 1.3.6.1.4.1.2544.1.11.5.1.3.13.1.5 | ColumncryptoPortStatusUnsuccessfulKeyExchangeDateAndTime | read-only | current | The date and time of a recent unsuccessful encryption key exchange. |
| 1.3.6.1.4.1.2544.1.11.5.1.3.13.1.6 | ColumncryptoPortStatusAuthKeyLifeTimeRemaining | read-only | current | Remaining time for cryptoPortConfigAuthKeyLifeTime timer to stop counting. |
| 1.3.6.1.4.1.2544.1.11.5.1.3.13.1.7 | ColumncryptoPortStatusEncryptionOffCapability | read-only | current | Capability for encryption switch. |
| 1.3.6.1.4.1.2544.1.11.5.1.3.20 | TablecryptoPortTable | not-accessible | current | This table contains encryption-related parameters defined per port. |
| 1.3.6.1.4.1.2544.1.11.5.1.3.20.1 | RowcryptoPortEntry | not-accessible | current | Every row of this table represents an encryption-capable port. |
| 1.3.6.1.4.1.2544.1.11.5.1.3.20.1.1 | ColumncryptoPortAuthKey | read-write | current | Encryption password being an input to generate an authentication key used to traffic encryption between ports. This object can be write only. Read attempt will… |
| 1.3.6.1.4.1.2544.1.11.5.1.3.20.1.2 | ColumncryptoPortAuthKeyLifeTime | read-write | current | Determines a life period of an introduced authentication key for a traffic encryption. |
| 1.3.6.1.4.1.2544.1.11.5.1.3.20.1.3 | ColumncryptoPortEncryptionOffState | read-write | current | Enable/disable possibility of using encryption switch. This is an additional trigger required to make a transition into transparent mode in two steps. |
| 1.3.6.1.4.1.2544.1.11.5.1.3.20.1.4 | ColumncryptoPortEncryptionOff | read-write | current | Disable/enable encryption switch. |
| 1.3.6.1.4.1.2544.1.11.5.1.3.20.1.5 | ColumncryptoPortForceKeyExchange | read-write | current | Force key exchange. |
| 1.3.6.1.4.1.2544.1.11.5.1.3.20.1.6 | ColumncryptoPortKeyExchangeForcedClear | read-write | current | Clears on demand the alarmEncryptionPortKeyExchangeForced condition. |
| 1.3.6.1.4.1.2544.1.11.5.1.3.20.1.7 | ColumncryptoPortEncryptionOffTimeRemaining | read-only | current | Informs about amount of minutes remaining to restore traffic encryption. |
| 1.3.6.1.4.1.2544.1.11.5.1.3.20.1.8 | ColumncryptoPortFailureKeyExchangeCount | read-only | current | Numbers of unsuccessful encryption key exchanges since the successful one. |
| 1.3.6.1.4.1.2544.1.11.5.1.3.20.1.9 | ColumncryptoPortSuccessfulKeyExchangeDateAndTime | read-only | current | The date and time of a recent successful encryption key exchange. |
| 1.3.6.1.4.1.2544.1.11.5.1.3.20.1.10 | ColumncryptoPortUnsuccessfulKeyExchangeDateAndTime | read-only | current | The date and time of a recent unsuccessful encryption key exchange. |
| 1.3.6.1.4.1.2544.1.11.5.1.3.20.1.11 | ColumncryptoPortAuthKeyLifeTimeRemaining | read-only | current | Remaining time for cryptoPortConfigAuthKeyLifeTime timer to stop counting. |
| 1.3.6.1.4.1.2544.1.11.5.1.3.21 | TablecryptoPortCapTable | not-accessible | current | This table contains encryption-related parameters defined per port. |
| 1.3.6.1.4.1.2544.1.11.5.1.3.21.1 | RowcryptoPortCapEntry | not-accessible | current | Every row of this table represents an encryption-capable port. |
| 1.3.6.1.4.1.2544.1.11.5.1.3.21.1.1 | ColumncryptoPortCapAuthKey | read-only | current | Encryption password being an input to generate an authentication key used to traffic encryption between ports. This object can be write only. Read attempt will… |
| 1.3.6.1.4.1.2544.1.11.5.1.3.21.1.2 | ColumncryptoPortCapAuthKeyLifeTime | read-only | current | Determines a life period of an introduced authentication key for a traffic encryption. |
| 1.3.6.1.4.1.2544.1.11.5.1.3.21.1.3 | ColumncryptoPortCapEncryptionOffState | read-only | current | Enable/disable possibility of using encryption switch. This is an additional trigger required to make a transition into transparent mode in two steps. |
| 1.3.6.1.4.1.2544.1.11.5.1.3.21.1.4 | ColumncryptoPortCapEncryptionOff | read-only | current | Disable/enable encryption switch. |
| 1.3.6.1.4.1.2544.1.11.5.1.3.21.1.5 | ColumncryptoPortCapForceKeyExchange | read-only | current | Force key exchange. |
| 1.3.6.1.4.1.2544.1.11.5.1.3.21.1.6 | ColumncryptoPortCapKeyExchangeForcedClear | read-only | current | Clears on demand the alarmEncryptionPortKeyExchangeForced condition. |
| 1.3.6.1.4.1.2544.1.11.5.1.4 | NodeencryptionPerformanceMonitoring | |||
| 1.3.6.1.4.1.2544.1.11.5.1.4.1 | TableintervalEncryptionSublayerPm15minTable | not-accessible | current | This table contains encryption-related performance monitoring 15-min values related to channel ports. |
| 1.3.6.1.4.1.2544.1.11.5.1.4.1.1 | RowintervalEncryptionSublayerPm15minEntry | not-accessible | current | Every row of this table represents performance monitoring entry. |
| 1.3.6.1.4.1.2544.1.11.5.1.4.1.1.1 | ColumnintervalEncryptionSublayerPm15minNumber | not-accessible | current | A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently comple… |
| 1.3.6.1.4.1.2544.1.11.5.1.4.1.1.2 | ColumnintervalEncryptionSublayerPm15minEncryptionRunSeconds | read-only | current | Informs about time period (seconds) during encryption mode. |
| 1.3.6.1.4.1.2544.1.11.5.1.4.1.1.3 | ColumnintervalEncryptionSublayerPm15minEncryptionRunErrorSeconds | read-only | current | Informs about errorous time period (seconds) during encryption mode. |
| 1.3.6.1.4.1.2544.1.11.5.1.4.1.1.4 | ColumnintervalEncryptionSublayerPm15minEncryptionRunDegradeSeconds | read-only | current | Informs about degraded time period (seconds) during encryption mode. |
| 1.3.6.1.4.1.2544.1.11.5.1.4.1.1.5 | ColumnintervalEncryptionSublayerPm15minValidFlag | read-only | current | Valid Flag |
| 1.3.6.1.4.1.2544.1.11.5.1.4.1.1.6 | ColumnintervalEncryptionSublayerPm15minTimeStamp | read-only | current | Timestamp |
| 1.3.6.1.4.1.2544.1.11.5.1.4.2 | TableintervalEncryptionSublayerPm1dayTable | not-accessible | current | This table contains interval encryption-related performance monitoring 15-min values related to channel ports. |
| 1.3.6.1.4.1.2544.1.11.5.1.4.2.1 | RowintervalEncryptionSublayerPm1dayEntry | not-accessible | current | Every row of this table represents performance monitoring entry. |
| 1.3.6.1.4.1.2544.1.11.5.1.4.2.1.1 | ColumnintervalEncryptionSublayerPm1dayNumber | not-accessible | current | A number, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 1 day interva… |
| 1.3.6.1.4.1.2544.1.11.5.1.4.2.1.2 | ColumnintervalEncryptionSublayerPm1dayEncryptionRunSeconds | read-only | current | Informs about time period (seconds) during encryption mode. |
| 1.3.6.1.4.1.2544.1.11.5.1.4.2.1.3 | ColumnintervalEncryptionSublayerPm1dayEncryptionRunErrorSeconds | read-only | current | Informs about errorous time period (seconds) during encryption mode. |
| 1.3.6.1.4.1.2544.1.11.5.1.4.2.1.4 | ColumnintervalEncryptionSublayerPm1dayEncryptionRunDegradeSeconds | read-only | current | Informs about degraded time period (seconds) during encryption mode. |
| 1.3.6.1.4.1.2544.1.11.5.1.4.2.1.5 | ColumnintervalEncryptionSublayerPm1dayValidFlag | read-only | current | Valid Flag |
| 1.3.6.1.4.1.2544.1.11.5.1.4.2.1.6 | ColumnintervalEncryptionSublayerPm1dayTimeStamp | read-only | current | Timestamp |
| 1.3.6.1.4.1.2544.1.11.5.1.4.3 | TablecurrentEncryptionSublayerPm15minTable | not-accessible | current | This table contains current encryption-related performance monitoring 15-min values related to channel ports. |
| 1.3.6.1.4.1.2544.1.11.5.1.4.3.1 | RowcurrentEncryptionSublayerPm15minEntry | not-accessible | current | Every row of this table represents performance monitoring entry. |
| 1.3.6.1.4.1.2544.1.11.5.1.4.3.1.1 | ColumncurrentEncryptionSublayerPm15minEncryptionRunSeconds | read-only | current | Encryption running seconds |
| 1.3.6.1.4.1.2544.1.11.5.1.4.3.1.2 | ColumncurrentEncryptionSublayerPm15minEncryptionRunErrorSeconds | read-only | current | Encryption Errored Seconds |
| 1.3.6.1.4.1.2544.1.11.5.1.4.3.1.3 | ColumncurrentEncryptionSublayerPm15minEncryptionRunDegradeSeconds | read-only | current | Encryption in degrade mode seconds |
| 1.3.6.1.4.1.2544.1.11.5.1.4.3.1.4 | ColumncurrentEncryptionSublayerPm15minElapsedTime | read-only | current | Elapsed 15Min |
| 1.3.6.1.4.1.2544.1.11.5.1.4.4 | TablecurrentEncryptionSublayerPm1dayTable | not-accessible | current | This table contains current encryption-related performance monitoring 1-day values related to channel ports. |
| 1.3.6.1.4.1.2544.1.11.5.1.4.4.1 | RowcurrentEncryptionSublayerPm1dayEntry | not-accessible | current | Every row of this table represents performance monitoring entry. |
| 1.3.6.1.4.1.2544.1.11.5.1.4.4.1.1 | ColumncurrentEncryptionSublayerPm1dayEncryptionRunSeconds | read-only | current | Encryption running seconds |
| 1.3.6.1.4.1.2544.1.11.5.1.4.4.1.2 | ColumncurrentEncryptionSublayerPm1dayEncryptionRunErrorSeconds | read-only | current | Encryption Errored Seconds |
| 1.3.6.1.4.1.2544.1.11.5.1.4.4.1.3 | ColumncurrentEncryptionSublayerPm1dayEncryptionRunDegradeSeconds | read-only | current | Encryption in degrade mode seconds |
| 1.3.6.1.4.1.2544.1.11.5.1.4.4.1.4 | ColumncurrentEncryptionSublayerPm1dayElapsedTime | read-only | current | Elapsed 1Day |
| 1.3.6.1.4.1.2544.1.11.5.1.4.10 | TablecryFacilityCurrent15minTable | not-accessible | current | This table contains current encryption-related performance monitoring 15-min values related to channel ports. |
| 1.3.6.1.4.1.2544.1.11.5.1.4.10.1 | RowcryFacilityCurrent15minEntry | not-accessible | current | Every row of this table represents performance monitoring entry. |
| 1.3.6.1.4.1.2544.1.11.5.1.4.10.1.1 | ColumncryFacilityCurrent15minEncryptionRunSeconds | read-only | current | Encryption running seconds |
| 1.3.6.1.4.1.2544.1.11.5.1.4.10.1.2 | ColumncryFacilityCurrent15minEncryptionRunErrorSeconds | read-only | current | Encryption Errored Seconds |
| 1.3.6.1.4.1.2544.1.11.5.1.4.10.1.3 | ColumncryFacilityCurrent15minEncryptionRunDegradeSeconds | read-only | current | Encryption in degrade mode seconds |
| 1.3.6.1.4.1.2544.1.11.5.1.4.10.1.4 | ColumncryFacilityCurrent15minElapsedTime | read-only | current | Elapsed 15Min |
| 1.3.6.1.4.1.2544.1.11.5.1.4.11 | TablecryFacilityCurrent1dayTable | not-accessible | current | This table contains current encryption-related performance monitoring 1-day values related to channel ports. |
| 1.3.6.1.4.1.2544.1.11.5.1.4.11.1 | RowcryFacilityCurrent1dayEntry | not-accessible | current | Every row of this table represents performance monitoring entry. |
| 1.3.6.1.4.1.2544.1.11.5.1.4.11.1.1 | ColumncryFacilityCurrent1dayEncryptionRunSeconds | read-only | current | Encryption running seconds |
| 1.3.6.1.4.1.2544.1.11.5.1.4.11.1.2 | ColumncryFacilityCurrent1dayEncryptionRunErrorSeconds | read-only | current | Encryption Errored Seconds |
| 1.3.6.1.4.1.2544.1.11.5.1.4.11.1.3 | ColumncryFacilityCurrent1dayEncryptionRunDegradeSeconds | read-only | current | Encryption in degrade mode seconds |
| 1.3.6.1.4.1.2544.1.11.5.1.4.11.1.4 | ColumncryFacilityCurrent1dayElapsedTime | read-only | current | Elapsed 1Day |
| 1.3.6.1.4.1.2544.1.11.5.1.4.12 | TablecryFacilityHistorical15minTable | not-accessible | current | This table contains historical encryption-related performance monitoring 15-min values related to channel ports. |
| 1.3.6.1.4.1.2544.1.11.5.1.4.12.1 | RowcryFacilityHistorical15minEntry | not-accessible | current | Every row of this table represents performance monitoring entry. |
| 1.3.6.1.4.1.2544.1.11.5.1.4.12.1.1 | ColumncryFacilityHistorical15minNumber | not-accessible | current | A number between 1 and 96, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently comple… |
| 1.3.6.1.4.1.2544.1.11.5.1.4.12.1.2 | ColumncryFacilityHistorical15minEncryptionRunSeconds | read-only | current | Informs about time period (seconds) during encryption mode. |
| 1.3.6.1.4.1.2544.1.11.5.1.4.12.1.3 | ColumncryFacilityHistorical15minEncryptionRunErrorSeconds | read-only | current | Informs about errorous time period (seconds) during encryption mode. |
| 1.3.6.1.4.1.2544.1.11.5.1.4.12.1.4 | ColumncryFacilityHistorical15minEncryptionRunDegradeSeconds | read-only | current | Informs about degraded time period (seconds) during encryption mode. |
| 1.3.6.1.4.1.2544.1.11.5.1.4.12.1.5 | ColumncryFacilityHistorical15minValidFlag | read-only | current | Valid Flag |
| 1.3.6.1.4.1.2544.1.11.5.1.4.12.1.6 | ColumncryFacilityHistorical15minTimeStamp | read-only | current | Timestamp |
| 1.3.6.1.4.1.2544.1.11.5.1.4.13 | TablecryFacilityHistorical1dayTable | not-accessible | current | This table contains historical encryption-related performance monitoring 1-day values related to channel ports. |
| 1.3.6.1.4.1.2544.1.11.5.1.4.13.1 | RowcryFacilityHistorical1dayEntry | not-accessible | current | Every row of this table represents performance monitoring entry. |
| 1.3.6.1.4.1.2544.1.11.5.1.4.13.1.1 | ColumncryFacilityHistorical1dayNumber | not-accessible | current | A number, which identifies the interval for which the set of statistics is available. The interval identified by 1 is the most recently completed 1 day interva… |
| 1.3.6.1.4.1.2544.1.11.5.1.4.13.1.2 | ColumncryFacilityHistorical1dayEncryptionRunSeconds | read-only | current | Informs about time period (seconds) during encryption mode. |
| 1.3.6.1.4.1.2544.1.11.5.1.4.13.1.3 | ColumncryFacilityHistorical1dayEncryptionRunErrorSeconds | read-only | current | Informs about errorous time period (seconds) during encryption mode. |
| 1.3.6.1.4.1.2544.1.11.5.1.4.13.1.4 | ColumncryFacilityHistorical1dayEncryptionRunDegradeSeconds | read-only | current | Informs about degraded time period (seconds) during encryption mode. |
| 1.3.6.1.4.1.2544.1.11.5.1.4.13.1.5 | ColumncryFacilityHistorical1dayValidFlag | read-only | current | Valid Flag |
| 1.3.6.1.4.1.2544.1.11.5.1.4.13.1.6 | ColumncryFacilityHistorical1dayTimeStamp | read-only | current | Timestamp |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| CryptoFspR7EnableDisable | INTEGER { undefined(0), enable(1), disable(2) } | current | Disable/Enable variable. |
| CryptoFspR7EnableDisableCaps | BITS { capUndefined(0), capEnable(1), capDisable(2) } | current | Disable/Enable variable. |
| CryptoFspR7EncryptionReset | INTEGER { undefined(0), rls(1), rtf(2) } | current | Textual-Convention for module 'reset to factory' operation. The rls(1) value means that 'reset to factory' is not happening. Choosing the rtf(2) value executes the 'reset to factory' operation immediately. |
| CryptoFspR7EncryptionResetCaps | BITS { capUndefined(0), capRls(1), capRtf(2) } | current | Textual-Convention for module 'reset to factory' operation. The rls(1) value means that 'reset to factory' is not happening. Choosing the rtf(2) value executes the 'reset to factory' operation immediately. |
| CryptoFspR7EncryptionSwitch | INTEGER { undefined(0), rls(1), oprCryptoOff(2) } | current | Textual-Convention for disabling the encrypted mode. |
| CryptoFspR7EncryptionSwitchCaps | BITS { capUndefined(0), capRls(1), capOprCryptoOff(2) } | current | Textual-Convention for disabling the encrypted mode. |
| CryptoFspR7ForceKeyExchange | INTEGER { undefined(0), rls(1), oprKeyExchg(2) } | current | Textual-Convention for forcing the key exchange process between encryption-capable modules. Successful process startup does not mean that whole operation succeeded. |
| CryptoFspR7ForceKeyExchangeCaps | BITS { capUndefined(0), capRls(1), capOprKeyExchg(2) } | current | Textual-Convention for forcing the key exchange process between encryption-capable modules. Successful process startup does not mean that whole operation succeeded. |
| CryptoFspR7KeyExchangeForcedClear | INTEGER { undefined(0), rls(1), reset(2) } | current | Textual-Convention for reseting the key exchange failure status. |
| CryptoFspR7KeyExchangeForcedClearCaps | BITS { capUndefined(0), capRls(1), capReset(2) } | current | Textual-Convention for reseting the key exchange failure status. |
| CryptoFspR7SelfTestOperation | INTEGER { undefined(0), rls(1), oprSelfTest(2) } | current | Encryption selftest |
| CryptoFspR7SelfTestOperationCaps | BITS { capUndefined(0), capRls(1), capOprSelfTest(2) } | current | Encryption selftest |
| CryptoFspR7SessionKeyLifetime | INTEGER { undefined(0), lifetime30min(1), lifetime1h(2), lifetime2h(3), lifetime3h(4), lifetime6h(5), lifetime12h(6), lifetime1d(7), lifetime2d(8), lifetime3d(9), lifetime1w(10), lifetime2w(11), lifetime3w(12), lifetimeMax(13) } | current | Textual-Convention presenting available key lifetime periods for an encrypted sessions. |
| CryptoFspR7SessionKeyLifetimeCaps | BITS { capUndefined(0), capLifetime30min(1), capLifetime1h(2), capLifetime2h(3), capLifetime3h(4), capLifetime6h(5), capLifetime12h(6), capLifetime1d(7), capLifetime2d(8), capLifetime3d(9), capLifetime1w(10), capLifetime2w(11), capLifetime3w(12), capLifetimeMax(13) } | current | Textual-Convention presenting available key lifetime periods for an encrypted sessions. |