AETHRA-MIB
186 objects
No module-level DESCRIPTION found.
Imported Objects
| IANAifType-MIB | IANAifType |
| RFC-1212 | OBJECT-TYPE |
| RFC-1215 | TRAP-TYPE |
| RFC1155-SMI | Counter enterprises Gauge IpAddress |
| RFC1213-MIB | DisplayString ifDescr ifIndex PhysAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.7745 | Nodeaethra | |||
| 1.3.6.1.4.1.7745.5 | Nodeatosnt | |||
| 1.3.6.1.4.1.7745.5.1 | Nodetools | |||
| 1.3.6.1.4.1.7745.5.1.1 | NodefileTransfer | |||
| 1.3.6.1.4.1.7745.5.1.1.1 | ScalarfileTransferProtocol | read-write | mandatory | Set this parameter to configure the protocol for file transfer command. The protocol file(4) reads from a local disk for download command, writes to a local di… |
| 1.3.6.1.4.1.7745.5.1.1.2 | ScalarfileTransferFileName | read-write | mandatory | Set this parameter to configure the name of the file to download or upload. When using HTTP protocol set full url as fileTransferFileName. OID: 1.3.6.1.4.1.774… |
| 1.3.6.1.4.1.7745.5.1.1.3 | ScalarfileTransferServerName | read-write | mandatory | Set this parameter to configure the name or IP address of remote server when using TFTP or FTP protocol. When not configured systemDefaultTftpServer or systemD… |
| 1.3.6.1.4.1.7745.5.1.1.4 | ScalarfileTransferOption | read-write | mandatory | Set this parameter to configure the type of file you are downloading or uploading. When not configured firmware type is used. firmware(1) is the operating syst… |
| 1.3.6.1.4.1.7745.5.1.1.5 | ScalarfileTransferStorageFileName | read-write | mandatory | Set this parameter to configure the name of the local file when using file(4) protocol. OID: 1.3.6.1.4.1.7745.5.1.1.5 |
| 1.3.6.1.4.1.7745.5.1.1.6 | ScalarfileTransferExec | read-write | mandatory | Set this parameter to start download or upload. OID: 1.3.6.1.4.1.7745.5.1.1.6 |
| 1.3.6.1.4.1.7745.5.1.1.7 | ScalarfileTransferStatus | read-only | mandatory | Get this parameter to read the current status of file transfer command. OID: 1.3.6.1.4.1.7745.5.1.1.7 |
| 1.3.6.1.4.1.7745.5.1.2 | Nodeping | |||
| 1.3.6.1.4.1.7745.5.1.2.1 | NodepingParameters | |||
| 1.3.6.1.4.1.7745.5.1.2.1.1 | ScalarpingHost | read-write | mandatory | Set this parameter to configure the host name or IP address to ping. OID: 1.3.6.1.4.1.7745.5.1.2.1.1 |
| 1.3.6.1.4.1.7745.5.1.2.1.2 | ScalarpingSize | read-write | mandatory | Set this parameter to configure the size of ping packet. OID: 1.3.6.1.4.1.7745.5.1.2.1.2 |
| 1.3.6.1.4.1.7745.5.1.2.1.3 | ScalarpingTries | read-write | mandatory | Set this parameter to configure the number of ping tries. OID: 1.3.6.1.4.1.7745.5.1.2.1.3 |
| 1.3.6.1.4.1.7745.5.1.2.1.4 | ScalarpingTTL | read-write | mandatory | Set this parameter to configure ping TTL option. OID: 1.3.6.1.4.1.7745.5.1.2.1.4 |
| 1.3.6.1.4.1.7745.5.1.2.1.5 | ScalarpingTimeOut | read-write | mandatory | Set this parameter to configure ping response timeout (sec). OID: 1.3.6.1.4.1.7745.5.1.2.1.5 |
| 1.3.6.1.4.1.7745.5.1.2.1.6 | ScalarpingSource | read-write | mandatory | Set this parameter to configure the name or IP address of the ping source. OID: 1.3.6.1.4.1.7745.5.1.2.1.6 |
| 1.3.6.1.4.1.7745.5.1.2.1.7 | ScalarpingStart | read-write | mandatory | Set this parameter to start ping. OID: 1.3.6.1.4.1.7745.5.1.2.1.7 |
| 1.3.6.1.4.1.7745.5.1.2.1.8 | ScalarpingStatus | read-only | mandatory | Get this parameter to read the current status of ping command. OID: 1.3.6.1.4.1.7745.5.1.2.1.8 |
| 1.3.6.1.4.1.7745.5.1.2.2 | NodepingStatistics | |||
| 1.3.6.1.4.1.7745.5.1.2.2.1 | ScalarpingTXpacket | read-only | mandatory | Get this parameter to read the number of packets transmitted. OID: 1.3.6.1.4.1.7745.5.1.2.2.1 |
| 1.3.6.1.4.1.7745.5.1.2.2.2 | ScalarpingRXpacket | read-only | mandatory | Get this parameter to read the number of packets received. OID: 1.3.6.1.4.1.7745.5.1.2.2.2 |
| 1.3.6.1.4.1.7745.5.1.2.2.3 | ScalarpingLOSTpacket | read-only | mandatory | Get this parameter to read the number of packets losted. OID: 1.3.6.1.4.1.7745.5.1.2.2.3 |
| 1.3.6.1.4.1.7745.5.1.2.2.4 | ScalarpingMinRTT | read-only | mandatory | Get this parameter to read the minimum Round Trip Time (RTT) value. OID: 1.3.6.1.4.1.7745.5.1.2.2.4 |
| 1.3.6.1.4.1.7745.5.1.2.2.5 | ScalarpingMaxRTT | read-only | mandatory | Get this parameter to read the maximum Round Trip Time (RTT) value. OID: 1.3.6.1.4.1.7745.5.1.2.2.5 |
| 1.3.6.1.4.1.7745.5.1.2.2.6 | ScalarpingAvgRTT | read-only | mandatory | Get this parameter to read the average Round Trip Time (RTT) value. OID: 1.3.6.1.4.1.7745.5.1.2.2.6 |
| 1.3.6.1.4.1.7745.5.2 | Nodesystem | |||
| 1.3.6.1.4.1.7745.5.2.1 | ScalarsystemLoglevel | read-write | mandatory | Set this parameter to configure the log level of the node system. OID: 1.3.6.1.4.1.7745.5.2.1 |
| 1.3.6.1.4.1.7745.5.2.2 | ScalarsystemDescription | read-write | mandatory | Set this parameter to configure system description. OID: 1.3.6.1.4.1.7745.5.2.2 |
| 1.3.6.1.4.1.7745.5.2.3 | ScalarsystemName | read-write | mandatory | Set this parameter to configure system name, it's also used as network hostname. OID: 1.3.6.1.4.1.7745.5.2.3 |
| 1.3.6.1.4.1.7745.5.2.4 | ScalarsystemLocalDomain | read-write | mandatory | Set this parameter to configure system local domain, it's also used as network workgroup. OID: 1.3.6.1.4.1.7745.5.2.4 |
| 1.3.6.1.4.1.7745.5.2.5 | ScalarsystemDefaultTftpServer | read-write | mandatory | Set this parameter to configure the name or IP address for the default remote TFTP server. OID: 1.3.6.1.4.1.7745.5.2.5 |
| 1.3.6.1.4.1.7745.5.2.6 | ScalarsystemTftpLocalAdd | read-write | mandatory | Set this parameter to configure the name or the local IP address used by the TFTP client. OID: 1.3.6.1.4.1.7745.5.2.6 |
| 1.3.6.1.4.1.7745.5.2.7 | ScalarsystemDefaultFtpServer | read-write | mandatory | Set this parameter to configure the name or IP address and port for the default remote FTP server. OID: 1.3.6.1.4.1.7745.5.2.7 |
| 1.3.6.1.4.1.7745.5.2.8 | ScalarsystemFtpLocalAdd | read-write | mandatory | Set this parameter to configure the name or the local IP address used by the FTP client. OID: 1.3.6.1.4.1.7745.5.2.8 |
| 1.3.6.1.4.1.7745.5.2.9 | ScalarsystemFtpUsername | read-write | mandatory | Set this parameter to configure the username for the default remote FTP server. OID: 1.3.6.1.4.1.7745.5.2.9 |
| 1.3.6.1.4.1.7745.5.2.10 | ScalarsystemFtpPassword | read-write | mandatory | Set this parameter to configure the password for the default remote FTP server. OID: 1.3.6.1.4.1.7745.5.2.10 |
| 1.3.6.1.4.1.7745.5.2.11 | ScalarsystemAAAProfile | read-write | mandatory | Set this parameter to configure the AAA profile used by the system. OID: 1.3.6.1.4.1.7745.5.2.11 |
| 1.3.6.1.4.1.7745.5.2.12 | ScalarsystemAAALogTimeout | read-write | mandatory | Set this parameter to configure the AAA login timeout. OID: 1.3.6.1.4.1.7745.5.2.12 |
| 1.3.6.1.4.1.7745.5.2.13 | ScalarsystemBackupAuth | read-write | mandatory | Set this parameter to enable the backup authentication system. OID: 1.3.6.1.4.1.7745.5.2.13 |
| 1.3.6.1.4.1.7745.5.2.14 | ScalarsystemScrollLine | read-write | mandatory | Set this parameter to enable the system scroll line. OID: 1.3.6.1.4.1.7745.5.2.14 |
| 1.3.6.1.4.1.7745.5.2.15 | ScalarsystemKernelLogs | read-write | mandatory | Set this parameter to enable the system kernel logs OID: 1.3.6.1.4.1.7745.5.2.15 |
| 1.3.6.1.4.1.7745.5.2.16 | ScalarsystemCryptedPassword | read-write | mandatory | Set this parameter to enable the system crypted password. OID: 1.3.6.1.4.1.7745.5.2.16 |
| 1.3.6.1.4.1.7745.5.2.17 | ScalarsystemSave | read-write | mandatory | Set this parameter to save current configuration. OID: 1.3.6.1.4.1.7745.5.2.17 |
| 1.3.6.1.4.1.7745.5.2.18 | NodesystemRestart | |||
| 1.3.6.1.4.1.7745.5.2.18.1 | ScalarrestartOption | read-write | mandatory | Set this parameter to choose restart command option. saveConf(0) saving configuration changes before restart the system, notSaveConf(1) restart the system with… |
| 1.3.6.1.4.1.7745.5.2.18.2 | ScalarrestartDelay | read-write | mandatory | Set this parameter to configure restart timeout (sec). OID: 1.3.6.1.4.1.7745.5.2.18.2 |
| 1.3.6.1.4.1.7745.5.2.18.3 | ScalarrestartExec | read-write | mandatory | Set this parameter to restart the system. OID: 1.3.6.1.4.1.7745.5.2.18.3 |
| 1.3.6.1.4.1.7745.5.2.18.4 | ScalarrestartStatus | read-only | mandatory | Get this parameter to read the current status of restart command. OID: OID: 1.3.6.1.4.1.7745.5.2.18.4 |
| 1.3.6.1.4.1.7745.5.2.19 | Nodeperformance | |||
| 1.3.6.1.4.1.7745.5.2.19.1 | ScalarperformanceCpuAvg1min | read-only | mandatory | Get this parameter to read the CPU average utilization in 1 minute (in %). OID: 1.3.6.1.4.1.7745.5.2.19.1 |
| 1.3.6.1.4.1.7745.5.2.19.2 | ScalarperformanceCpuAvg5min | read-only | mandatory | Get this parameter to read the CPU average utilization in 5 minute (in %). OID: 1.3.6.1.4.1.7745.5.2.19.2 |
| 1.3.6.1.4.1.7745.5.2.19.3 | ScalarperformanceCpuAvg15min | read-only | mandatory | Get this parameter to read the CPU average utilization in 15 minute (in %). OID: 1.3.6.1.4.1.7745.5.2.19.3 |
| 1.3.6.1.4.1.7745.5.2.19.4 | ScalarperformanceDynMemLoad | read-only | mandatory | Get this parameter to read the usage of dynamic memory (in %). OID: 1.3.6.1.4.1.7745.5.2.19.4 |
| 1.3.6.1.4.1.7745.5.2.19.5 | ScalarperformanceDynMemTotal | read-only | mandatory | Get this parameter to read the total dynamic memory (in KBytes). OID: 1.3.6.1.4.1.7745.5.2.19.5 |
| 1.3.6.1.4.1.7745.5.2.19.6 | ScalarperformanceDynMemFree | read-only | mandatory | Get this parameter to read the free dynamic memory (in KBytes). OID: 1.3.6.1.4.1.7745.5.2.19.6 |
| 1.3.6.1.4.1.7745.5.2.20 | ScalarsystemDefaultScpServer | read-write | mandatory | Set this parameter to configure the name or IP address and port for the default remote SCP server. OID: 1.3.6.1.4.1.7745.5.2.20 |
| 1.3.6.1.4.1.7745.5.2.21 | ScalarsystemScpUsername | read-write | mandatory | Set this parameter to configure the username for the default remote SCP server. OID: 1.3.6.1.4.1.7745.5.2.21 |
| 1.3.6.1.4.1.7745.5.2.22 | ScalarsystemScpPassword | read-write | mandatory | Set this parameter to configure the password for the default remote SCP server. OID: 1.3.6.1.4.1.7745.5.2.22 |
| 1.3.6.1.4.1.7745.5.2.23 | ScalarsystemConsoleEnable | read-write | mandatory | Set this parameter to enable or disable serial console. OID: 1.3.6.1.4.1.7745.5.2.23 |
| 1.3.6.1.4.1.7745.5.2.24 | ScalarsystemLogMsgRate | read-write | mandatory | Set this parameter to configure the maximum number of log messages per minute. A value set to 0 (zero) is equivalent to unlimited. OID: 1.3.6.1.4.1.7745.5.2.24 |
| 1.3.6.1.4.1.7745.5.3 | Nodedsl | |||
| 1.3.6.1.4.1.7745.5.3.1 | Nodexdsl | |||
| 1.3.6.1.4.1.7745.5.3.1.1 | TablexdslTable | not-accessible | mandatory | This is a table showing the list of xdsl interface entries. OID: 1.3.6.1.4.1.7745.5.3.1.1 |
| 1.3.6.1.4.1.7745.5.3.1.1.1 | RowxdslEntry | not-accessible | mandatory | OID: 1.3.6.1.4.1.7745.5.3.1.1.1 |
| 1.3.6.1.4.1.7745.5.3.1.1.1.1 | ColumnxdslIndex | read-only | mandatory | Get this parameter to read the index of the row. OID: 1.3.6.1.4.1.7745.5.3.1.1.1.1 |
| 1.3.6.1.4.1.7745.5.3.1.1.1.2 | ColumnxdslLinkStatus | read-only | mandatory | Get this parameter to read the link status. OID: 1.3.6.1.4.1.7745.5.3.1.1.1.2 |
| 1.3.6.1.4.1.7745.5.3.1.1.1.3 | ColumnxdslTc | read-only | mandatory | Get this parameter to read link transmission convergence. OID: 1.3.6.1.4.1.7745.5.3.1.1.1.3 |
| 1.3.6.1.4.1.7745.5.3.1.1.1.4 | ColumnxdslUsAttenuation | read-only | mandatory | Get this parameter to read link upstream attenuation (0.1 dB steps). OID: 1.3.6.1.4.1.7745.5.3.1.1.1.4 |
| 1.3.6.1.4.1.7745.5.3.1.1.1.5 | ColumnxdslDsAttenuation | read-only | mandatory | Get this parameter to read link downstream attenuation (0.1 dB steps). OID: 1.3.6.1.4.1.7745.5.3.1.1.1.5 |
| 1.3.6.1.4.1.7745.5.3.1.1.1.6 | ColumnxdslUsNoiseMargin | read-only | mandatory | Get this parameter to read link upstream noise margin (0.1 dB steps). OID: 1.3.6.1.4.1.7745.5.3.1.1.1.6 |
| 1.3.6.1.4.1.7745.5.3.1.1.1.7 | ColumnxdslDsNoiseMargin | read-only | mandatory | Get this parameter to read link downstream noise margin (0.1 dB steps). OID: 1.3.6.1.4.1.7745.5.3.1.1.1.7 |
| 1.3.6.1.4.1.7745.5.3.1.1.1.8 | ColumnxdslUsCurrRate | read-only | mandatory | Get this parameter to read link upstream current rate (in Kbps). OID: 1.3.6.1.4.1.7745.5.3.1.1.1.8 |
| 1.3.6.1.4.1.7745.5.3.1.1.1.9 | ColumnxdslDsCurrRate | read-only | mandatory | Get this parameter to read link downstream current rate (in Kbps). OID: 1.3.6.1.4.1.7745.5.3.1.1.1.9 |
| 1.3.6.1.4.1.7745.5.3.1.1.1.10 | ColumnxdslModulationType | read-only | mandatory | Get this parameter to read link modulation type. OID: 1.3.6.1.4.1.7745.5.3.1.1.1.10 |
| 1.3.6.1.4.1.7745.5.3.1.1.1.11 | ColumnxdslUsMaxTheorRate | read-only | mandatory | Get this parameter to read link upstream attainable max rate (in Kbps). OID: 1.3.6.1.4.1.7745.5.3.1.1.1.11 |
| 1.3.6.1.4.1.7745.5.3.1.1.1.12 | ColumnxdslDsMaxTheorRate | read-only | mandatory | Get this parameter to read link downstream attainable max rate (in Kbps). OID: 1.3.6.1.4.1.7745.5.3.1.1.1.12 |
| 1.3.6.1.4.1.7745.5.3.1.1.1.13 | ColumnxdslUsTotBytes | read-only | mandatory | Get this parameter to read link upstream total bytes. OID: 1.3.6.1.4.1.7745.5.3.1.1.1.13 |
| 1.3.6.1.4.1.7745.5.3.1.1.1.14 | ColumnxdslDsTotBytes | read-only | mandatory | Get this parameter to read link downstream total bytes. OID: 1.3.6.1.4.1.7745.5.3.1.1.1.14 |
| 1.3.6.1.4.1.7745.5.3.1.1.1.15 | ColumnxdslNeTotCrcErr | read-only | mandatory | Get this parameter to read link near-end total CRC errors. OID: 1.3.6.1.4.1.7745.5.3.1.1.1.15 |
| 1.3.6.1.4.1.7745.5.3.1.1.1.16 | ColumnxdslNeShowtimeCrcErr | read-only | mandatory | Get this parameter to read link near-end last showtime CRC errors. OID: 1.3.6.1.4.1.7745.5.3.1.1.1.16 |
| 1.3.6.1.4.1.7745.5.3.2 | Nodeshdsl | |||
| 1.3.6.1.4.1.7745.5.3.2.1 | TableshdslTable | not-accessible | mandatory | This is a table showing the list of shdsl physical interface entries. OID: 1.3.6.1.4.1.7745.5.3.2.1 |
| 1.3.6.1.4.1.7745.5.3.2.1.1 | RowshdslEntry | not-accessible | mandatory | OID: 1.3.6.1.4.1.7745.5.3.2.1.1 |
| 1.3.6.1.4.1.7745.5.3.2.1.1.1 | ColumnshdslIndex | read-only | mandatory | Get this parameter to read the index of the row. OID: 1.3.6.1.4.1.7745.5.3.2.1.1.1 |
| 1.3.6.1.4.1.7745.5.3.2.1.1.2 | ColumnshdslPhyStatus | read-only | mandatory | Get this parameter to read physical status. OID: 1.3.6.1.4.1.7745.5.3.2.1.1.2 |
| 1.3.6.1.4.1.7745.5.3.2.1.1.3 | ColumnshdslTc | read-only | mandatory | Get this parameter to read physical transmission convergence. OID: 1.3.6.1.4.1.7745.5.3.2.1.1.3 |
| 1.3.6.1.4.1.7745.5.3.2.1.1.4 | ColumnshdslUsAttenuation | read-only | mandatory | Get this parameter to read physical upstream attenuation (0.1 dB steps). OID: 1.3.6.1.4.1.7745.5.3.2.1.1.4 |
| 1.3.6.1.4.1.7745.5.3.2.1.1.5 | ColumnshdslDsAttenuation | read-only | mandatory | Get this parameter to read physical downstream attenuation (0.1 dB steps). OID: 1.3.6.1.4.1.7745.5.3.2.1.1.5 |
| 1.3.6.1.4.1.7745.5.3.2.1.1.6 | ColumnshdslUsNoiseMargin | read-only | mandatory | Get this parameter to read physical upstream noise margin (0.1 dB steps). OID: 1.3.6.1.4.1.7745.5.3.2.1.1.6 |
| 1.3.6.1.4.1.7745.5.3.2.1.1.7 | ColumnshdslDsNoiseMargin | read-only | mandatory | Get this parameter to read physical downstream noise margin (0.1 dB steps). OID: 1.3.6.1.4.1.7745.5.3.2.1.1.7 |
| 1.3.6.1.4.1.7745.5.3.2.1.1.8 | ColumnshdslUsCurrRate | read-only | mandatory | Get this parameter to read physical upstream current rate (in Kbps). OID: 1.3.6.1.4.1.7745.5.3.2.1.1.8 |
| 1.3.6.1.4.1.7745.5.3.2.1.1.9 | ColumnshdslDsCurrRate | read-only | mandatory | Get this parameter to read physical downstream current rate (in Kbps). OID: 1.3.6.1.4.1.7745.5.3.2.1.1.9 |
| 1.3.6.1.4.1.7745.5.3.2.1.1.10 | ColumnshdslModulationType | read-only | mandatory | Get this parameter to read physical modulation type. OID: 1.3.6.1.4.1.7745.5.3.2.1.1.10 |
| 1.3.6.1.4.1.7745.5.3.2.1.1.11 | ColumnshdslUsMaxTheorRate | read-only | mandatory | Get this parameter to read physical upstream attainable max rate (in Kbps). OID: 1.3.6.1.4.1.7745.5.3.2.1.1.11 |
| 1.3.6.1.4.1.7745.5.3.2.1.1.12 | ColumnshdslDsMaxTheorRate | read-only | mandatory | Get this parameter to read physical downstream attainable max rate (in Kbps). OID: 1.3.6.1.4.1.7745.5.3.2.1.1.12 |
| 1.3.6.1.4.1.7745.5.3.2.1.1.13 | ColumnshdslUsTotBytes | read-only | mandatory | Get this parameter to read physical upstream total bytes. OID: 1.3.6.1.4.1.7745.5.3.2.1.1.13 |
| 1.3.6.1.4.1.7745.5.3.2.1.1.14 | ColumnshdslDsTotBytes | read-only | mandatory | Get this parameter to read physical downstream total bytes. OID: 1.3.6.1.4.1.7745.5.3.2.1.1.14 |
| 1.3.6.1.4.1.7745.5.3.2.1.1.15 | ColumnshdslNeTotCrcErr | read-only | mandatory | Get this parameter to read physical near-end total CRC errors. OID: 1.3.6.1.4.1.7745.5.3.2.1.1.15 |
| 1.3.6.1.4.1.7745.5.3.2.1.1.16 | ColumnshdslNeShowtimeCrcErr | read-only | mandatory | Get this parameter to read physical near-end last showtime CRC errors. OID: 1.3.6.1.4.1.7745.5.3.2.1.1.16 |
| 1.3.6.1.4.1.7745.5.3.2.1.1.17 | ColumnshdslUsPower | read-only | mandatory | Get this parameter to read physical Us Power. OID: 1.3.6.1.4.1.7745.5.3.2.1.1.17 |
| 1.3.6.1.4.1.7745.5.3.2.1.1.18 | ColumnshdslDsPower | read-only | mandatory | Get this parameter to read physical Ds Power. OID: 1.3.6.1.4.1.7745.5.3.2.1.1.18 |
| 1.3.6.1.4.1.7745.5.4 | Nodevoip | |||
| 1.3.6.1.4.1.7745.5.4.1 | Nodetrunk | |||
| 1.3.6.1.4.1.7745.5.4.1.1 | TabletrunkTable | not-accessible | mandatory | This is a table showing the list of configured voip SIP trunk. OID: 1.3.6.1.4.1.7745.5.4.1.1 |
| 1.3.6.1.4.1.7745.5.4.1.1.1 | RowtrunkEntry | not-accessible | mandatory | OID: 1.3.6.1.4.1.7745.5.4.1.1.1 |
| 1.3.6.1.4.1.7745.5.4.1.1.1.1 | ColumntrunkIndex | read-only | mandatory | Get this parameter to read the index of the row. OID: 1.3.6.1.4.1.7745.5.4.1.1.1.1 |
| 1.3.6.1.4.1.7745.5.4.1.1.1.2 | ColumntrunkName | read-only | mandatory | Get this parameter to read trunk name. OID: 1.3.6.1.4.1.7745.5.4.1.1.1.2 |
| 1.3.6.1.4.1.7745.5.4.1.1.1.3 | ColumntrunkType | read-only | mandatory | Get this parameter to read trunk type. OID: 1.3.6.1.4.1.7745.5.4.1.1.1.3 |
| 1.3.6.1.4.1.7745.5.4.1.1.1.4 | ColumntrunkEnable | read-write | mandatory | Get this parameter to read trunk registration enable. OID: 1.3.6.1.4.1.7745.5.4.1.1.1.4 |
| 1.3.6.1.4.1.7745.5.4.1.1.1.5 | ColumntrunkDescription | read-only | mandatory | Get this parameter to read trunk description. OID: 1.3.6.1.4.1.7745.5.4.1.1.1.5 |
| 1.3.6.1.4.1.7745.5.4.1.1.1.6 | ColumntrunkUserName | read-only | mandatory | Get this parameter to read trunk username. OID: 1.3.6.1.4.1.7745.5.4.1.1.1.6 |
| 1.3.6.1.4.1.7745.5.4.1.1.1.7 | ColumntrunkRegHost | read-only | mandatory | Get this parameter to read trunk registar host. OID: 1.3.6.1.4.1.7745.5.4.1.1.1.7 |
| 1.3.6.1.4.1.7745.5.4.1.1.1.8 | ColumntrunkProxyHost | read-only | mandatory | Get this parameter to read trunk proxy host. OID: 1.3.6.1.4.1.7745.5.4.1.1.1.8 |
| 1.3.6.1.4.1.7745.5.4.1.1.1.9 | ColumntrunkIfcStatus | read-only | mandatory | Get this parameter to read trunk interface status. OID: 1.3.6.1.4.1.7745.5.4.1.1.1.9 |
| 1.3.6.1.4.1.7745.5.4.1.1.1.10 | ColumntrunkRegStatus | read-only | mandatory | Get this parameter to read trunk registration status. OID: 1.3.6.1.4.1.7745.5.4.1.1.1.10 |
| 1.3.6.1.4.1.7745.5.4.1.1.1.11 | ColumntrunkMsgWait | read-only | mandatory | Get this parameter to read trunk message wait status. OID: 1.3.6.1.4.1.7745.5.4.1.1.1.11 |
| 1.3.6.1.4.1.7745.5.4.1.2 | TabletrunkIsdnTable | not-accessible | mandatory | This is a table showing the list of configured voip ISDN trunk. OID: 1.3.6.1.4.1.7745.5.4.1.2 |
| 1.3.6.1.4.1.7745.5.4.1.2.1 | RowtrunkIsdnEntry | not-accessible | mandatory | OID: 1.3.6.1.4.1.7745.5.4.1.2.1 |
| 1.3.6.1.4.1.7745.5.4.1.2.1.1 | ColumntrunkIsdnIndex | read-only | mandatory | Get this parameter to read the index of the row. OID: 1.3.6.1.4.1.7745.5.4.1.2.1.1 |
| 1.3.6.1.4.1.7745.5.4.1.2.1.2 | ColumntrunkIsdnName | read-only | mandatory | Get this parameter to read trunk name. OID: 1.3.6.1.4.1.7745.5.4.1.2.1.2 |
| 1.3.6.1.4.1.7745.5.4.1.2.1.3 | ColumntrunkIsdnType | read-only | mandatory | Get this parameter to read trunk type. OID: 1.3.6.1.4.1.7745.5.4.1.2.1.3 |
| 1.3.6.1.4.1.7745.5.4.1.2.1.4 | ColumntrunkIsdnEnable | read-write | mandatory | Get this parameter to read trunk enable configuration. OID: 1.3.6.1.4.1.7745.5.4.1.2.1.4 |
| 1.3.6.1.4.1.7745.5.4.1.2.1.5 | ColumntrunkIsdnDescription | read-only | mandatory | Get this parameter to read trunk description. OID: 1.3.6.1.4.1.7745.5.4.1.2.1.5 |
| 1.3.6.1.4.1.7745.5.4.1.2.1.6 | ColumntrunkIsdnB1Status | read-only | mandatory | Get this parameter to read trunk B1 status. OID: 1.3.6.1.4.1.7745.5.4.1.2.1.6 |
| 1.3.6.1.4.1.7745.5.4.1.2.1.7 | ColumntrunkIsdnB2Status | read-only | mandatory | Get this parameter to read trunk B2 status. OID: 1.3.6.1.4.1.7745.5.4.1.2.1.7 |
| 1.3.6.1.4.1.7745.5.4.1.3 | TabletrunkFxoTable | not-accessible | mandatory | This is a table showing the list of configured voip FXO trunk. OID: 1.3.6.1.4.1.7745.5.4.1.3 |
| 1.3.6.1.4.1.7745.5.4.1.3.1 | RowtrunkFxoEntry | not-accessible | mandatory | OID: 1.3.6.1.4.1.7745.5.4.1.3.1 |
| 1.3.6.1.4.1.7745.5.4.1.3.1.1 | ColumntrunkFxoIndex | read-only | mandatory | Get this parameter to read the index of the row. OID: 1.3.6.1.4.1.7745.5.4.1.3.1.1 |
| 1.3.6.1.4.1.7745.5.4.1.3.1.2 | ColumntrunkFxoName | read-only | mandatory | Get this parameter to read trunk name. OID: 1.3.6.1.4.1.7745.5.4.1.3.1.2 |
| 1.3.6.1.4.1.7745.5.4.1.3.1.3 | ColumntrunkFxoType | read-only | mandatory | Get this parameter to read trunk type. OID: 1.3.6.1.4.1.7745.5.4.1.3.1.3 |
| 1.3.6.1.4.1.7745.5.4.1.3.1.4 | ColumntrunkFxoEnable | read-write | mandatory | Get this parameter to read trunk enable configuration. OID: 1.3.6.1.4.1.7745.5.4.1.3.1.4 |
| 1.3.6.1.4.1.7745.5.4.1.3.1.5 | ColumntrunkFxoDescription | read-only | mandatory | Get this parameter to read trunk description. OID: 1.3.6.1.4.1.7745.5.4.1.3.1.5 |
| 1.3.6.1.4.1.7745.5.4.1.3.1.6 | ColumntrunkFxoStatus | read-only | mandatory | Get this parameter to read trunk status. OID: 1.3.6.1.4.1.7745.5.4.1.3.1.6 |
| 1.3.6.1.4.1.7745.5.4.2 | NodeuserTerminal | |||
| 1.3.6.1.4.1.7745.5.4.2.1 | TableusTermPotsTable | not-accessible | mandatory | This is a table showing the list of configured voip POTS user terminal. OID: 1.3.6.1.4.1.7745.5.4.2.1 |
| 1.3.6.1.4.1.7745.5.4.2.1.1 | RowusTermPotsEntry | not-accessible | mandatory | OID: 1.3.6.1.4.1.7745.5.4.2.1.1 |
| 1.3.6.1.4.1.7745.5.4.2.1.1.1 | ColumnusTermPotsIndex | read-only | mandatory | Get this parameter to read the index of the row. OID: 1.3.6.1.4.1.7745.5.4.2.1.1.1 |
| 1.3.6.1.4.1.7745.5.4.2.1.1.2 | ColumnusTermPotsEnable | read-write | mandatory | Get this parameter to read user terminal enable configuration. OID: 1.3.6.1.4.1.7745.5.4.2.1.1.2 |
| 1.3.6.1.4.1.7745.5.4.2.1.1.3 | ColumnusTermPotsDescription | read-only | mandatory | Get this parameter to read user terminal description. OID: 1.3.6.1.4.1.7745.5.4.2.1.1.3 |
| 1.3.6.1.4.1.7745.5.4.2.1.1.4 | ColumnusTermPotsStatus | read-only | mandatory | Get this parameter to read user terminal status. OID: 1.3.6.1.4.1.7745.5.4.2.1.1.4 |
| 1.3.6.1.4.1.7745.5.4.2.1.1.5 | ColumnusTermPotsDspSlic | read-only | mandatory | Get this parameter to read user terminal DSP Slic. OID: 1.3.6.1.4.1.7745.5.4.2.1.1.5 |
| 1.3.6.1.4.1.7745.5.4.2.2 | TableusTermISDNTable | not-accessible | mandatory | This is a table showing the list of configured voip ISDN user terminal. OID: 1.3.6.1.4.1.7745.5.4.2.2 |
| 1.3.6.1.4.1.7745.5.4.2.2.1 | RowusTermISDNEntry | not-accessible | mandatory | OID: 1.3.6.1.4.1.7745.5.4.2.2.1 |
| 1.3.6.1.4.1.7745.5.4.2.2.1.1 | ColumnusTermISDNIndex | read-only | mandatory | Get this parameter to read the index of the row. OID: 1.3.6.1.4.1.7745.5.4.2.2.1.1 |
| 1.3.6.1.4.1.7745.5.4.2.2.1.2 | ColumnusTermISDNEnable | read-write | mandatory | Get this parameter to read user terminal enable configuration. OID: 1.3.6.1.4.1.7745.5.4.2.2.1.2 |
| 1.3.6.1.4.1.7745.5.4.2.2.1.3 | ColumnusTermISDNDescription | read-only | mandatory | Get this parameter to read user terminal description. OID: 1.3.6.1.4.1.7745.5.4.2.2.1.3 |
| 1.3.6.1.4.1.7745.5.4.2.2.1.4 | ColumnusTermIsdnStatusB1 | read-only | mandatory | Get this parameter to read user terminal B1 status. OID: 1.3.6.1.4.1.7745.5.4.2.2.1.4 |
| 1.3.6.1.4.1.7745.5.4.2.2.1.5 | ColumnusTermIsdnStatusB2 | read-only | mandatory | Get this parameter to read user terminal B2 status. OID: 1.3.6.1.4.1.7745.5.4.2.2.1.5 |
| 1.3.6.1.4.1.7745.5.4.2.3 | TableusTermDectTable | not-accessible | mandatory | This is a table showing the list of configured voip DECT user terminal. OID: 1.3.6.1.4.1.7745.5.4.2.3 |
| 1.3.6.1.4.1.7745.5.4.2.3.1 | RowusTermDectEntry | not-accessible | mandatory | OID: 1.3.6.1.4.1.7745.5.4.2.3.1 |
| 1.3.6.1.4.1.7745.5.4.2.3.1.1 | ColumnusTermDectIndex | read-only | mandatory | Get this parameter to read the index of the row. OID: 1.3.6.1.4.1.7745.5.4.2.3.1.1 |
| 1.3.6.1.4.1.7745.5.4.2.3.1.2 | ColumnusTermDectEnable | read-write | mandatory | Get this parameter to read user terminal enable configuration. OID: 1.3.6.1.4.1.7745.5.4.2.3.1.2 |
| 1.3.6.1.4.1.7745.5.4.2.3.1.3 | ColumnusTermDectDescription | read-only | mandatory | Get this parameter to read user terminal description. OID: 1.3.6.1.4.1.7745.5.4.2.3.1.3 |
| 1.3.6.1.4.1.7745.5.4.2.3.1.4 | ColumnusTermDectStatus | read-only | mandatory | Get this parameter to read user terminal status. OID: 1.3.6.1.4.1.7745.5.4.2.3.1.4 |
| 1.3.6.1.4.1.7745.5.4.2.3.1.5 | ColumnusTermDectDspSlic | read-only | mandatory | Get this parameter to read user terminal DSP Slic. OID: 1.3.6.1.4.1.7745.5.4.2.3.1.5 |
| 1.3.6.1.4.1.7745.5.4.3 | ScalarvoipMaxConnection | read-write | mandatory | Set this parameter to configure global voip max connections. OID: 1.3.6.1.4.1.7745.5.4.3 |
| 1.3.6.1.4.1.7745.5.5 | Nodetraps | |||
| 1.3.6.1.4.1.7745.5.5.1 | NotificationgenericTrap | current | This trap is used to send generic string alarm messages to SNMP manager, when a particular condition occurs. OID: 1.3.6.1.4.1.7745.5.5.1 | |
| 1.3.6.1.4.1.7745.5.5.2 | ScalargenericError | read-only | mandatory | Describe a generic error for generic trap. OID: 1.3.6.1.4.1.7745.5.5.2 |
| 1.3.6.1.4.1.7745.5.5.3 | NotificationinterfaceUp | current | This trap is sent when a physical interface go up. OID: 1.3.6.1.4.1.7745.5.5.3 | |
| 1.3.6.1.4.1.7745.5.5.4 | NotificationinterfaceDown | current | This trap is sent when a physical interface go down. OID: 1.3.6.1.4.1.7745.5.5.4 | |
| 1.3.6.1.4.1.7745.5.5.5 | NotificationtrunkRegistered | current | This trap is sent when a voip SIP Trunk registered. OID: 1.3.6.1.4.1.7745.5.5.5 | |
| 1.3.6.1.4.1.7745.5.5.6 | NotificationtrunkUnregistered | current | This trap is sent when a voip SIP Trunk unregistered. OID: 1.3.6.1.4.1.7745.5.5.6 | |
| 1.3.6.1.4.1.7745.5.5.7 | NodemgmtAccesses | |||
| 1.3.6.1.4.1.7745.5.5.7.1 | ScalarmgmtUser | read-only | mandatory | A textual string containing user name. OID: 1.3.6.1.4.1.7745.5.5.7.1 |
| 1.3.6.1.4.1.7745.5.5.7.2 | ScalarmgmtPrivilege | read-only | mandatory | A textual string containing user privilege. OID: 1.3.6.1.4.1.7745.5.5.7.2 |
| 1.3.6.1.4.1.7745.5.5.7.3 | ScalarmgmtTime | read-only | mandatory | A textual string containing time and date of event. OID: 1.3.6.1.4.1.7745.5.5.7.3 |
| 1.3.6.1.4.1.7745.5.5.7.4 | ScalarmgmtType | read-only | mandatory | A textual string containing user access type. OID: 1.3.6.1.4.1.7745.5.5.7.4 |
| 1.3.6.1.4.1.7745.5.5.7.5 | ScalarmgmtAddress | read-only | mandatory | A textual string containing ip for remote access type. OID: 1.3.6.1.4.1.7745.5.5.7.5 |
| 1.3.6.1.4.1.7745.5.5.7.6 | NotificationmgmtLogin | current | This trap is sent when a user login in the system console. OID: 1.3.6.1.4.1.7745.5.5.7.6 | |
| 1.3.6.1.4.1.7745.5.5.7.7 | NotificationmgmtLogout | current | This trap is sent when a user logout from the system console. OID: 1.3.6.1.4.1.7745.5.5.7.7 | |
| 1.3.6.1.4.1.7745.5.5.7.8 | NotificationmgmtChange | current | This trap is sent when a logged user change param in the system console. OID: 1.3.6.1.4.1.7745.5.5.7.8 | |
| 1.3.6.1.4.1.7745.5.6 | Nodeifc | |||
| 1.3.6.1.4.1.7745.5.6.1 | TableifcTable | not-accessible | mandatory | This is a table showing the list of interface entries. The number of entries is given by the value of mib-2 ifNumber. The indexes for the rows are equivalent t… |
| 1.3.6.1.4.1.7745.5.6.1.1 | RowifcEntry | not-accessible | mandatory | OID: 1.3.6.1.4.1.7745.5.6.1.1 |
| 1.3.6.1.4.1.7745.5.6.1.1.1 | ColumnifcName | read-only | mandatory | Get this parameter to read interface name. OID: 1.3.6.1.4.1.7745.5.6.1.1.1 |
| 1.3.6.1.4.1.7745.5.6.1.1.2 | ColumnifcDescr | read-only | mandatory | Get this parameter to read interface description. OID: 1.3.6.1.4.1.7745.5.6.1.1.2 |
| 1.3.6.1.4.1.7745.5.6.1.1.3 | ColumnifcType | read-only | mandatory | Get this parameter to read interface type. The types refer to those assigned by the Internet Assigned Numbers Authority (IANA). OID: 1.3.6.1.4.1.7745.5.6.1.1.3 |
| 1.3.6.1.4.1.7745.5.6.1.1.4 | ColumnifcPhysAddress | read-only | mandatory | Get this parameter to read interface physical address (mac address). OID: 1.3.6.1.4.1.7745.5.6.1.1.4 |
| 1.3.6.1.4.1.7745.5.6.1.1.5 | ColumnifcMtu | read-only | mandatory | Get this parameter to read interface MTU, the size of the largest datagram which can be sent/received on the interface, specified in octets. OID: 1.3.6.1.4.1.7… |
| 1.3.6.1.4.1.7745.5.6.1.1.6 | ColumnifcSpeed | read-only | mandatory | Get this parameter to read interface speed, an estimate of the interface's current bandwidth in bits per second. OID: 1.3.6.1.4.1.7745.5.6.1.1.6 |
| 1.3.6.1.4.1.7745.5.6.1.1.7 | ColumnifcRxRate | read-only | mandatory | Get this parameter to read the current and effective RX rate in bit per second. OID: 1.3.6.1.4.1.7745.5.6.1.1.7 |
| 1.3.6.1.4.1.7745.5.6.1.1.8 | ColumnifcTxRate | read-only | mandatory | Get this parameter to read the current and effective TX rate in bit per second. OID: 1.3.6.1.4.1.7745.5.6.1.1.8 |