AGENT-MIB
56 objects
The Structure of Common Management Information for the D-Link enterprise.
Imported Objects
| DLINK-ID-REC-MIB | dlink-common-mgmt |
| RFC1155-SMI | IpAddress |
| RFC1213-MIB | DisplayString |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.171.12.1 | IdentityagentGeneralMgmt | The Structure of Common Management Information for the D-Link enterprise. | ||
| 1.3.6.1.4.1.171.12.1.1 | NodeagentBasicInfo | |||
| 1.3.6.1.4.1.171.12.1.1.1 | ScalaragentMgmtProtocolCapability | read-only | current | The network management protocol(s) supported by this agent. |
| 1.3.6.1.4.1.171.12.1.1.2 | TableagentMibCapabilityTable | not-accessible | current | A list of MIB capability entries supported by this agent. |
| 1.3.6.1.4.1.171.12.1.1.2.1 | RowagentMibCapabilityEntry | not-accessible | current | A MIB capability entry contains objects describing a particular MIB supported by this agent. |
| 1.3.6.1.4.1.171.12.1.1.2.1.1 | ColumnagentMibCapabilityIndex | read-only | current | A list of agentMibCapabilityDescr entries. |
| 1.3.6.1.4.1.171.12.1.1.2.1.2 | ColumnagentMibCapabilityDescr | read-only | current | The name of the MIB supported by the agent. |
| 1.3.6.1.4.1.171.12.1.1.2.1.3 | ColumnagentMibCapabilityVersion | read-only | current | The version of the MIB specified in this entry. |
| 1.3.6.1.4.1.171.12.1.1.2.1.4 | ColumnagentMibCapabilityType | read-only | current | The type of the MIB specified in this entry. |
| 1.3.6.1.4.1.171.12.1.1.3 | ScalaragentStatusConsoleInUse | read-only | current | This indicates whether console is currently in-use. |
| 1.3.6.1.4.1.171.12.1.1.4 | ScalaragentStatusSaveCfg | read-only | current | This indicates the status of the device configuration. other(1) - this entry is currently in use but the conditions under which it will remain so are different… |
| 1.3.6.1.4.1.171.12.1.1.5 | ScalaragentStatusFileTransfer | read-only | current | status of firmware download control. If the value is 'other', means never firmware updated since device started up. |
| 1.3.6.1.4.1.171.12.1.1.8 | TableagentPORTutilizationTable | not-accessible | current | This table specifies the current utilization of a specified port. |
| 1.3.6.1.4.1.171.12.1.1.8.1 | RowagentPORTutilizationEntry | not-accessible | current | A list of information regarding the port utilization function. |
| 1.3.6.1.4.1.171.12.1.1.8.1.1 | ColumnagentPORTutilizationProtIndex | read-only | current | This object indicates the module's port number. |
| 1.3.6.1.4.1.171.12.1.1.8.1.2 | ColumnagentPORTutilizationTX | read-only | current | The current rate of transmitted frames on the specified port. |
| 1.3.6.1.4.1.171.12.1.1.8.1.3 | ColumnagentPORTutilizationRX | read-only | current | The current rate of received frames on the specified port. |
| 1.3.6.1.4.1.171.12.1.1.8.1.4 | ColumnagentPORTutilizationUtil | read-only | current | The current percentages regarding port statistics. |
| 1.3.6.1.4.1.171.12.1.2 | NodeagentBasicConfig | |||
| 1.3.6.1.4.1.171.12.1.2.1 | TableagentBscSwFileTable | not-accessible | current | A list of MIB Basic Config entries supported file Update by this agent. |
| 1.3.6.1.4.1.171.12.1.2.1.1 | RowagentBscSwFileEntry | not-accessible | current | A basic config entry contains objects describing a particular MIB supported by this agent. |
| 1.3.6.1.4.1.171.12.1.2.1.1.1 | ColumnagentBscSwFileIndex | read-write | current | The table index for the file entry |
| 1.3.6.1.4.1.171.12.1.2.1.1.2 | ColumnagentBscSwFileDscr | read-write | current | The description for the purpose of the software file in this entry. Note: For system which does not support change of this object, setting value to this object… |
| 1.3.6.1.4.1.171.12.1.2.1.1.3 | ColumnagentBscSwFileAddr | read-write | current | The IP address where the File to be downloaded is located, or the IP address where the file will be uploaded to. |
| 1.3.6.1.4.1.171.12.1.2.1.1.4 | ColumnagentBscSwFileTransferType | read-write | current | The channel through which the file will be downloaded or uploaded. Note: For system which does not support all channels, setting value to the unsupported chann… |
| 1.3.6.1.4.1.171.12.1.2.1.1.5 | ColumnagentBscSwFile | read-write | current | The name of the file to be downloaded from the TFTP server, or to be uploaded to. |
| 1.3.6.1.4.1.171.12.1.2.1.1.6 | ColumnagentBscSwFileLocateId | read-write | current | This object describes the type of the file. runtime-code(1), log-file(2), cfg-file(3) Note: For system which does not support change of this object, setting va… |
| 1.3.6.1.4.1.171.12.1.2.1.1.7 | ColumnagentBscSwFileLoadType | read-write | current | This object provides the user to select download or upload function for the file. Note: For system which does not support change of this object, setting value … |
| 1.3.6.1.4.1.171.12.1.2.1.1.8 | ColumnagentBscSwFileCtrl | read-write | current | This object provides the user to download runtime software. The setting will take effect when the system is restart. See Note(1) below Note: For system which d… |
| 1.3.6.1.4.1.171.12.1.2.2 | ScalaragentFileTransfer | read-write | obsolete | This object will execute the download or upload action. If start(2), it will begin to download/upload, but no reset as follow. If start-and-reset(3), then the … |
| 1.3.6.1.4.1.171.12.1.2.3 | ScalaragentSystemReset | read-write | current | This object indicates the agent system reset state. Setting this object to no-reset(4) has no effect. Setting this object to cold-start(2) or warm-start(3) wil… |
| 1.3.6.1.4.1.171.12.1.2.4 | ScalaragentRs232PortConfig | read-write | current | This object indicates the RS-232C mode while device restart. |
| 1.3.6.1.4.1.171.12.1.2.5 | ScalaragentOutOfBandBaudRateConfig | read-write | obsolete | This object allows user to specify out_of_band baud rate. It will take effect when the system is restart. Note: Because these funiction will be limited by the … |
| 1.3.6.1.4.1.171.12.1.2.6 | ScalaragentSaveCfg | read-write | current | This indicates the current device saving type will be saved into to NV-RAM. other(1) - none of the following. cfg(3) - save configuration. log(4) - save log. a… |
| 1.3.6.1.4.1.171.12.1.2.10 | NodeagentTrustHostMgmt | |||
| 1.3.6.1.4.1.171.12.1.2.10.1 | TableagentTrustHostTable | not-accessible | current | This table contains Trust Host information. |
| 1.3.6.1.4.1.171.12.1.2.10.1.1 | RowagentTrustHostEntry | not-accessible | current | A list of information about Trust Host. |
| 1.3.6.1.4.1.171.12.1.2.10.1.1.1 | ColumnagentTrustHostIndex | read-only | current | The index of Trust Host entry. |
| 1.3.6.1.4.1.171.12.1.2.10.1.1.2 | ColumnagentTrustHostIPAddress | read-create | current | Specifies the IP address of the Trust Host. |
| 1.3.6.1.4.1.171.12.1.2.10.1.1.3 | ColumnagentTrustHostRowStatus | read-create | current | Indicates the status of this entry. When creating a Trust Host entry, the IP address should be set, too. |
| 1.3.6.1.4.1.171.12.1.2.10.1.1.4 | ColumnagentTrustHostIPSubnetMask | read-create | current | Specifies the IP subnet mask of the Trust Host. |
| 1.3.6.1.4.1.171.12.1.2.10.2 | ScalaragentTrustHostDelAllState | read-write | current | Used to delete all Trust Host entries. |
| 1.3.6.1.4.1.171.12.1.2.11 | NodeagentFDBMgmt | |||
| 1.3.6.1.4.1.171.12.1.2.11.1 | ScalaragentFDBClearAllState | read-write | current | Used to clear all FDB entries. |
| 1.3.6.1.4.1.171.12.1.2.12 | NodeagentARPMgmt | |||
| 1.3.6.1.4.1.171.12.1.2.12.1 | ScalaragentARPClearAllState | read-write | current | Used to clear all ARP entries. |
| 1.3.6.1.4.1.171.12.1.3 | NodeagentIpProtoConfig | |||
| 1.3.6.1.4.1.171.12.1.3.1 | ScalaragentIpNumOfIf | read-only | current | The total number of IP interfaces supported by this agent. |
| 1.3.6.1.4.1.171.12.1.3.2 | ScalaragentIpTftpServerAddr | read-write | obsolete | The IP Address of TFTP Server. |
| 1.3.6.1.4.1.171.12.1.3.3 | ScalaragentIpGetIpFrom | read-write | current | This object indicates whether the agent get its system IP address from Bootp/DHCP server at start up. |
| 1.3.6.1.4.1.171.12.1.5 | NodeagentConsoleModeManager | |||
| 1.3.6.1.4.1.171.12.1.5.1 | ScalaragentConsoleModeManagerDataBits | read-write | current | The DataBits for console mode, If the agentRs232PortConfig change to console mode then the device will use this group to make a setup for console value and age… |
| 1.3.6.1.4.1.171.12.1.5.2 | ScalaragentConsoleModeManagerStopBits | read-write | current | The Stop Bits for console mode |
| 1.3.6.1.4.1.171.12.1.5.3 | ScalaragentConsoleModeManagerParity | read-write | current | The Parity for console mode, If the agentRs232PortConfig change to console mode then the device will use this group to make a setup for console value and agent… |
| 1.3.6.1.4.1.171.12.1.5.4 | ScalaragentConsoleModeManagerBaudRate | read-write | current | The transmit rate for console mode. Note: Because these funiction will be limited by the system support. Some of the select item will invalid. When one of the … |
| 1.3.6.1.4.1.171.12.1.5.5 | ScalaragentConsoleModeManagerLogoutTime | read-write | current | The time period of auto logout. |