MIB Viewer

AH_TRAP_MIB

87 objects
This is the MIB module for access point trap definitions for Aerohive Networks Inc.
Imported Objects
AH-SMI-MIBahAPTrap AhMACProtocol AhNodeID AhString
SNMPv2-SMIMODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE
SNMPv2-TCDisplayString
OIDNameAccessStatusDescription
1.3.6.1.4.1.26928.1.1.1.1.1IdentityahTrapModuleThis is the MIB module for access point trap definitions for Aerohive Networks Inc.
1.3.6.1.4.1.26928.1.1.1.1.1.1NotificationahFailureTrapcurrentThis event is generated for any equipment or software failures.
1.3.6.1.4.1.26928.1.1.1.1.1.2NotificationahThresholdCrossingEventcurrentThis event is generated whenever a threshold is crossed for the first time.
1.3.6.1.4.1.26928.1.1.1.1.1.3NotificationahStateChangeEventcurrentThis event is generated whenever an object state change occurs.
1.3.6.1.4.1.26928.1.1.1.1.1.4NotificationahConnectionChangeEventcurrentThis event is generated whenever a connection state change occurs. The connection might be between a HiveAP and its client, or between a HiveAP and a neighbori…
1.3.6.1.4.1.26928.1.1.1.1.1.5NotificationahIDPStationEventcurrentThis event is generated whenever IDP detects an AP in its neighborhood. The ahRomoteId indicates the detected AP MAC address, and the ahIDPCompliance indicates…
1.3.6.1.4.1.26928.1.1.1.1.1.6NotificationahClientInfoEventcurrentThis event is generated whenever HiveAP a new client makes an association and its IP address, hostname, and User name is obtained.
1.3.6.1.4.1.26928.1.1.1.1.1.7NotificationahPoEEventcurrentThis event is generated whenever a HiveAP (802.11n product line) boots up or changes power levels.
1.3.6.1.4.1.26928.1.1.1.1.1.8NotificationahChannelPowerChangeEventcurrentThis event is generated whenever a HiveAP boots up, or changes channels or power levels.
1.3.6.1.4.1.26928.1.1.1.1.1.9NotificationahIDPMitigateEventcurrentThis event is generated whenever IDP detects an rogue client connect to a rogue AP. The ahRomoteId indicates the detected Station MAC address.
1.3.6.1.4.1.26928.1.1.1.1.1.10NotificationahInterferenceMapAlertEventcurrentFor every one minute interval, AP will monitor the interference channel utilizations (snapshot, short term means average and running average) and CRC error rat…
1.3.6.1.4.1.26928.1.1.1.1.1.11NotificationahBandwidthSentinelEventcurrentHiveOS will send two different kinds of traps: bandwidth sentinel alert trap, and bandwidth sentinel clear trap. The ��alert�� trap will serve the purp…
1.3.6.1.4.1.26928.1.1.1.1.1.12NotificationahAlarmMsgMapAlertEventcurrentHiveOS will send two different kinds of level alert: interface level alert, and client level alert. There are four alert types, CRC error rate, TX drop/retry r…
1.3.6.1.4.1.26928.1.1.1.1.2NodeahNotificationVarBind
1.3.6.1.4.1.26928.1.1.1.1.2.1ScalarahAPIdnot-accessiblecurrentIt is the node ID (MAC address in hexadecimal format) of the HiveAP where the trap is generated. If a HiveAP is configured with 2 hives, the node ID is the fir…
1.3.6.1.4.1.26928.1.1.1.1.2.2ScalarahAPNamenot-accessiblecurrentThe host name of the HiveAP where the trap is generated.
1.3.6.1.4.1.26928.1.1.1.1.2.3ScalarahSeveritynot-accessiblecurrentIt contains the serverity of the trap.
1.3.6.1.4.1.26928.1.1.1.1.2.4ScalarahObjectNamenot-accessiblecurrentIt describes the object for which the trap is generated.
1.3.6.1.4.1.26928.1.1.1.1.2.5ScalarahProbableCausenot-accessiblecurrentIt describes the probable cause of a problem.
1.3.6.1.4.1.26928.1.1.1.1.2.6ScalarahCurValuenot-accessiblecurrentIt contains the current value of a threshold counter.
1.3.6.1.4.1.26928.1.1.1.1.2.7ScalarahThresholdHighnot-accessiblecurrentIt contains the value for a high threshold.
1.3.6.1.4.1.26928.1.1.1.1.2.8ScalarahThresholdLownot-accessiblecurrentIt contains the value for a low threshold.
1.3.6.1.4.1.26928.1.1.1.1.2.9ScalarahPreviousStatenot-accessiblecurrentIt contains the value for a previous state.
1.3.6.1.4.1.26928.1.1.1.1.2.10ScalarahCurrentStatenot-accessiblecurrentIt contains the value for the current state.
1.3.6.1.4.1.26928.1.1.1.1.2.11ScalarahTrapDescnot-accessiblecurrentIt contains the description of the trap.
1.3.6.1.4.1.26928.1.1.1.1.2.12ScalarahCodenot-accessiblecurrentIt contains access information to the Aerohive logging/action dictionary.
1.3.6.1.4.1.26928.1.1.1.1.2.13ScalarahIfIndexnot-accessiblecurrentThe interface index used to identify uniquely an interface (logical or physical).
1.3.6.1.4.1.26928.1.1.1.1.2.14ScalarahObjectTypenot-accessiblecurrentIt specifies the object type: a client link or a neighbor link.
1.3.6.1.4.1.26928.1.1.1.1.2.15ScalarahRemoteIdnot-accessiblecurrentIt is the MAC address of the remote node. If the remote node is a HiveAP, the ID must be the MAC address of its management interface. If the remote node is a c…
1.3.6.1.4.1.26928.1.1.1.1.2.16ScalarahIDPTypenot-accessiblecurrentIt is used to indicate the AP identified is a rogue, or valid, or compliant, or noncompliant, or external AP.
1.3.6.1.4.1.26928.1.1.1.1.2.17ScalarahIDPChannelnot-accessiblecurrentIt is the channel number used by the identified AP.
1.3.6.1.4.1.26928.1.1.1.1.2.18ScalarahIDPRSSInot-accessiblecurrentIt is the RSSI for the identified AP or Client.
1.3.6.1.4.1.26928.1.1.1.1.2.19ScalarahIDPCompliancenot-accessiblecurrentIt is bit mask to indicate which policy the indentified AP is compliant with (bit is set if it is NOT compliant).
1.3.6.1.4.1.26928.1.1.1.1.2.20ScalarahSSIDnot-accessiblecurrentIt contains the SSID name for the detected AP.
1.3.6.1.4.1.26928.1.1.1.1.2.21ScalarahStationTypenot-accessiblecurrentIt indicates whether it is event for a peer AP or client PC
1.3.6.1.4.1.26928.1.1.1.1.2.22ScalarahIDPStationDatanot-accessiblecurrentIt is bit mask to indicate policies are detected for the identified AP . Note: the oui_policy and ssid_policy are omitted due to the presence of the ahRemoteID…
1.3.6.1.4.1.26928.1.1.1.1.2.23ScalarahRemovednot-accessiblecurrentIt indicates whether the AP or client can not be detected.
1.3.6.1.4.1.26928.1.1.1.1.2.24ScalarahClientMACnot-accessiblecurrentIt contains the MAC address of the wireless client. It is required.
1.3.6.1.4.1.26928.1.1.1.1.2.25ScalarahCLientIPnot-accessiblecurrentIt contains the IP address of the wireless client. It is optional.
1.3.6.1.4.1.26928.1.1.1.1.2.26ScalarahClientHostNamenot-accessiblecurrentIt contains the host name of the wireless client. It is optional.
1.3.6.1.4.1.26928.1.1.1.1.2.27ScalarahClientUserNamenot-accessiblecurrentIt contains the user name of the wireless client. It is optional.
1.3.6.1.4.1.26928.1.1.1.1.2.28ScalarahPowerSrcnot-accessiblecurrentIt indicates whether the power source is from the power adaptor or PoE. If the power source is the adaptor, PoE information in the trap is ignored.
1.3.6.1.4.1.26928.1.1.1.1.2.29ScalarahPoEEth0Onnot-accessiblecurrentIt indicates whether PoE is on eth0 or not.
1.3.6.1.4.1.26928.1.1.1.1.2.30ScalarahPoEEth0Pwrnot-accessiblecurrentIt indicates the power level of PoE in watts multiply by 10.
1.3.6.1.4.1.26928.1.1.1.1.2.31ScalarahPoEEth1Onnot-accessiblecurrentIt indicates whether PoE is on eth1 or not.
1.3.6.1.4.1.26928.1.1.1.1.2.32ScalarahPoEEth1Pwrnot-accessiblecurrentIt indicates the power level of PoE on eht1 in watts multiply by 10.
1.3.6.1.4.1.26928.1.1.1.1.2.33ScalarahRadioChannelread-onlycurrentIt is the channel number currently in use for this radio.
1.3.6.1.4.1.26928.1.1.1.1.2.34ScalarahRadioTxPowerread-onlycurrentIt is the transmit power in dBm that the radio is currently using. The range is 0 to 20 dBm.
1.3.6.1.4.1.26928.1.1.1.1.2.35ScalarahClientAuthMethodread-onlycurrentIt is the authentication method the client uses when communicating with the HiveAP.
1.3.6.1.4.1.26928.1.1.1.1.2.36ScalarahClientEncryptionMethodread-onlycurrentIt is the encryption method the client uses when communicating with the HiveAP.
1.3.6.1.4.1.26928.1.1.1.1.2.37ScalarahClientMACProtocolread-onlycurrentIt is the radio mode the client uses when communicating with the HiveAP.
1.3.6.1.4.1.26928.1.1.1.1.2.38ScalarahClientVLANread-onlycurrentIt is the VLAN that the client uses when communicating with the HiveAP.
1.3.6.1.4.1.26928.1.1.1.1.2.39ScalarahClientUserProfIdread-onlycurrentIt is the user profile ID that the client uses when communicating with the HiveAP.
1.3.6.1.4.1.26928.1.1.1.1.2.40ScalarahClientChannelread-onlycurrentIt is the radio channel that the client uses when communicating with the HiveAP.
1.3.6.1.4.1.26928.1.1.1.1.2.41ScalarahClientCWPUsedread-onlycurrentIt is the Boolean datatype indicating whether a captive web portal is used.
1.3.6.1.4.1.26928.1.1.1.1.2.42ScalarahBSSIDread-onlycurrentIt is the basic service set identifier of the client if the ahRemoteId is a client.
1.3.6.1.4.1.26928.1.1.1.1.2.43ScalarahPoEEth0MaxSpeedread-onlycurrentIt is the automatically adjusted maximum Ethernet speed based on the power source and level.
1.3.6.1.4.1.26928.1.1.1.1.2.44ScalarahPoEEth1MaxSpeedread-onlycurrentIt is the automatically adjusted maximum Ethernet speed based on the power source and level.
1.3.6.1.4.1.26928.1.1.1.1.2.45ScalarahPoEWifi0Settingread-onlycurrentIt is the automatically adjusted Wi-Fi setting based on the power source and power level.
1.3.6.1.4.1.26928.1.1.1.1.2.46ScalarahPoEWifi1Settingread-onlycurrentIt is the automatically adjusted Wi-Fi setting based on the power source and power level.
1.3.6.1.4.1.26928.1.1.1.1.2.47ScalarahPoEWifi2Settingread-onlycurrentIt is the automatically adjusted Wi-Fi setting based on the power source and power level.
1.3.6.1.4.1.26928.1.1.1.1.2.48ScalarahAssociationTimeread-onlycurrentThe association time(s) of client connect or disconnect to AP.
1.3.6.1.4.1.26928.1.1.1.1.2.49ScalarahIDPInNetread-onlycurrentIt is the Boolean datatype indicating whether AP is in local network.
1.3.6.1.4.1.26928.1.1.1.1.2.50ScalarahDiscoverAgeread-onlycurrentIt is the age from the rogue client is discovered.
1.3.6.1.4.1.26928.1.1.1.1.2.51ScalarahUpdateAgeread-onlycurrentIt is the age from the rogue client is updated.
1.3.6.1.4.1.26928.1.1.1.1.2.52ScalarahRunningAverageInterferenceread-onlycurrentchannel utilizations running average interference.
1.3.6.1.4.1.26928.1.1.1.1.2.53ScalarahShortTermInterferenceread-onlycurrentchannel utilizations short term interference. The short term period is defined by CLI config, usually, it should be in the range of 5 minutes to 30 minutes.
1.3.6.1.4.1.26928.1.1.1.1.2.54ScalarahSnapshotInterferenceread-onlycurrentchannel utilizations snapshot interference. it is the last minute��s means average.
1.3.6.1.4.1.26928.1.1.1.1.2.55ScalarahFailureSetread-onlycurrentIt is the Boolean datatype indicating whether this failure(alert) is on or off.
1.3.6.1.4.1.26928.1.1.1.1.2.56ScalarahInterferenceThresholdread-onlycurrentthe configured channel utilizations interference threshold. it is defined by CLI config.
1.3.6.1.4.1.26928.1.1.1.1.2.57ScalarahCRCErrRateThresholdread-onlycurrentthe configured CRC error rate threshold. it is defined by CLI config.
1.3.6.1.4.1.26928.1.1.1.1.2.58ScalarahCRCErrRateread-onlycurrentshort term CRC error rate. The interval of the refresh of CRC error rate calculation is the same interval as channel utilization short term means average inter…
1.3.6.1.4.1.26928.1.1.1.1.2.59ScalarahBandwidthSentinelStatusread-onlycurrentBandwidth sentinel status. In alert message, the value should be zero. In clear message, the value should be 1.
1.3.6.1.4.1.26928.1.1.1.1.2.60ScalarahGuaranteedBandwidthread-onlycurrentthe configured guaranteed bandwidth(Kbps). it is defined by CLI config.
1.3.6.1.4.1.26928.1.1.1.1.2.61ScalarahActualBandwidthread-onlycurrentthe actual bandwidth(Kbps).
1.3.6.1.4.1.26928.1.1.1.1.2.62ScalarahBandwidthSentinelActionread-onlycurrentbit maps to indicate which action has been taken on this client. bit 0: indicate whether log the guaranteed bandwidth violation or not, bit 1: indicate whether…
1.3.6.1.4.1.26928.1.1.1.1.2.63ScalarahBeaconIntervalread-onlycurrentIt is the number of time units between Beacon transmissions, One time unit is 1024 microseconds.
1.3.6.1.4.1.26928.1.1.1.1.2.64ScalarahLevelread-onlycurrentThe level value will tell HM whether this is an interface level alert or a client alert.
1.3.6.1.4.1.26928.1.1.1.1.2.65ScalarahAlarmAlertTyperead-onlycurrentThere are five types, CRC Rate only applies to interface level alert, TX drop/retry rate is is calculated based on retries over total unicast TX frames, RX dro…
1.3.6.1.4.1.26928.1.1.1.1.2.66ScalarahThresholdValueread-onlycurrentthe configured CRC error rate, TX drop/retry rate, RX drop rate threshold. it is defined by CLI config.
1.3.6.1.4.1.26928.1.1.1.1.2.67ScalarahShortTermValueread-onlycurrentthe percentage of this sampling period, CRC error rate, TX drop/retry rate, RX drop rate.
1.3.6.1.4.1.26928.1.1.1.1.2.68ScalarahSnapshotValueread-onlycurrentthe snapshot value of CRC error rate, TX drop/retry rate, RX drop rate.
1.3.6.1.4.1.26928.1.1.1.1.2.69ScalarahIfNameread-onlycurrentName - uniquely identifies an AP Interface.
Type Definitions
NameSyntaxStatusDescription
AhAuthenticationMethodINTEGER { cwp (0), open (1), wep-open (2), wep-shared (3), wpa-psk (4), wpa2-psk (5), wpa-8021x (6), wpa2-8021X (7), wpa-auto-psk (8), wpa-auto-8021x (9), dynamic-wep (10), 8021x (11) }currentAuthentication method supported by the HiveAP
AhEncrytionMethodINTEGER { AES (0), TKIP (1), WEP (2), Non (3) }currentEncryption method supported by the HiveAP
AhProbableCauseINTEGER { ahClear (0), ahUnknown (1), ahFlashFailure (2), ahFanFailure (3), ahPowerSupplyFailure (4), ahSoftwareUpgradeFailure (5), ahRadioFailure (6), ahConfFailure (7) }currentIt defines the probable cause for a problem on the HiveAP.
AhStateINTEGER { ahUp (1), ahDown (2) }currentIt defines the state for interfaces.
MIB Viewer