ALARM-MIB
84 objects
The MIB module describes a generic solution to model alarms and to store the current list of active alarms. Copyright (C) The Internet Society (2004). The initial version of this MIB module was published in RFC 3877. For full legal notices see the RFC itself. Supplementary information may be available on: http://www.ietf.org/copyrights/ianamib.html
Imported Objects
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | --acl enterprises --acl IpAddress Counter32 Counter64 Gauge32 Integer32 IpAddress mib-2 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Opaque TimeTicks Unsigned32 |
| SNMPv2-TC | DateAndTime RowPointer RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.118 | IdentityalarmMIB | The MIB module describes a generic solution to model alarms and to store the current list of active alarms. Copyright (C) The Internet Society (2004). The init… | ||
| 1.3.6.1.2.1.118.0 | NodealarmNotifications | |||
| 1.3.6.1.2.1.118.0.2 | NotificationalarmActiveState | current | An instance of the alarm indicated by alarmActiveModelPointer has been raised against the entity indicated by alarmActiveResourceId. The agent must throttle th… | |
| 1.3.6.1.2.1.118.0.3 | NotificationalarmClearState | current | An instance of the alarm indicated by alarmActiveModelPointer has been cleared against the entity indicated by alarmActiveResourceId. The agent must throttle t… | |
| 1.3.6.1.2.1.118.1 | NodealarmObjects | |||
| 1.3.6.1.2.1.118.1.1 | NodealarmModel | |||
| 1.3.6.1.2.1.118.1.1.1 | ScalaralarmModelLastChanged | read-only | current | The value of sysUpTime at the time of the last creation, deletion or modification of an entry in the alarmModelTable. If the number and content of entries has … |
| 1.3.6.1.2.1.118.1.1.2 | TablealarmModelTable | not-accessible | current | A table of information about possible alarms on the system, and how they have been modelled. |
| 1.3.6.1.2.1.118.1.1.2.1 | RowalarmModelEntry | not-accessible | current | Entries appear in this table for each possible alarm state. This table MUST be persistent across system reboots. |
| 1.3.6.1.2.1.118.1.1.2.1.1 | ColumnalarmModelIndex | not-accessible | current | An integer that acts as an alarm Id to uniquely identify each alarm within the named alarm list. |
| 1.3.6.1.2.1.118.1.1.2.1.2 | ColumnalarmModelState | not-accessible | current | A value of 1 MUST indicate a clear alarm state. The value of this object MUST be less than the alarmModelState of more severe alarm states for this alarm. The … |
| 1.3.6.1.2.1.118.1.1.2.1.3 | ColumnalarmModelNotificationId | read-create | current | The NOTIFICATION-TYPE object identifier of this alarm state transition. If there is no notification associated with this alarm state, the value of this object … |
| 1.3.6.1.2.1.118.1.1.2.1.4 | ColumnalarmModelVarbindIndex | read-create | current | The index into the varbind listing of the notification indicated by alarmModelNotificationId which helps signal that the given alarm has changed state. If ther… |
| 1.3.6.1.2.1.118.1.1.2.1.5 | ColumnalarmModelVarbindValue | read-create | current | The value that the varbind indicated by alarmModelVarbindIndex takes to indicate that the alarm has entered this state. If alarmModelVarbindIndex has a value o… |
| 1.3.6.1.2.1.118.1.1.2.1.6 | ColumnalarmModelDescription | read-create | current | A brief description of this alarm and state suitable to display to operators. |
| 1.3.6.1.2.1.118.1.1.2.1.7 | ColumnalarmModelSpecificPointer | read-create | current | If no additional, model-specific Alarm MIB is supported by the system the value of this object is `0.0'and attempts to set it to any other value MUST be reject… |
| 1.3.6.1.2.1.118.1.1.2.1.8 | ColumnalarmModelVarbindSubtree | read-create | current | The name portion of each VarBind in the notification, in order, is compared to the value of this object. If the name is equal to or a subtree of the value of t… |
| 1.3.6.1.2.1.118.1.1.2.1.9 | ColumnalarmModelResourcePrefix | read-create | current | The value of AlarmActiveResourceID is computed by appending any indexes extracted in accordance with the description of alarmModelVarbindSubtree onto the value… |
| 1.3.6.1.2.1.118.1.1.2.1.10 | ColumnalarmModelRowStatus | read-create | current | Control for creating and deleting entries. Entries may be modified while active. Alarms whose alarmModelRowStatus is not active will not appear in either the a… |
| 1.3.6.1.2.1.118.1.2 | NodealarmActive | |||
| 1.3.6.1.2.1.118.1.2.1 | ScalaralarmActiveLastChanged | read-only | current | The value of sysUpTime at the time of the last creation or deletion of an entry in the alarmActiveTable. If the number of entries has been unchanged since the … |
| 1.3.6.1.2.1.118.1.2.2 | TablealarmActiveTable | not-accessible | current | A table of Active Alarms entries. |
| 1.3.6.1.2.1.118.1.2.2.1 | RowalarmActiveEntry | not-accessible | current | Entries appear in this table when alarms are raised. They are removed when the alarm is cleared. If under extreme resource constraint the system is unable to a… |
| 1.3.6.1.2.1.118.1.2.2.1.1 | ColumnalarmListName | not-accessible | current | The name of the list of alarms. This SHOULD be the same as nlmLogName if the Notification Log MIB [RFC3014] is supported. This SHOULD be the same as, or contai… |
| 1.3.6.1.2.1.118.1.2.2.1.2 | ColumnalarmActiveDateAndTime | not-accessible | current | The local date and time when the error occurred. This object facilitates retrieving all instances of alarms that have been raised or have changed state since a… |
| 1.3.6.1.2.1.118.1.2.2.1.3 | ColumnalarmActiveIndex | not-accessible | current | A strictly monotonically increasing integer which acts as the index of entries within the named alarm list. It wraps back to 1 after it reaches its maximum val… |
| 1.3.6.1.2.1.118.1.2.2.1.4 | ColumnalarmActiveEngineID | read-only | current | The identification of the SNMP engine at which the alarm originated. If the alarm is from an SNMPv1 system this object is a zero length string. |
| 1.3.6.1.2.1.118.1.2.2.1.5 | ColumnalarmActiveEngineAddressType | read-only | current | This object indicates what type of address is stored in the alarmActiveEngineAddress object - IPv4, IPv6, DNS, etc. |
| 1.3.6.1.2.1.118.1.2.2.1.6 | ColumnalarmActiveEngineAddress | read-only | current | The address of the SNMP engine on which the alarm is occurring. This object MUST always be instantiated, even if the list can contain alarms from only one engi… |
| 1.3.6.1.2.1.118.1.2.2.1.7 | ColumnalarmActiveContextName | read-only | current | The name of the SNMP MIB context from which the alarm came. For SNMPv1 alarms this is the community string from the Trap. Note that care MUST be taken when sel… |
| 1.3.6.1.2.1.118.1.2.2.1.8 | ColumnalarmActiveVariables | read-only | current | The number of variables in alarmActiveVariableTable for this alarm. |
| 1.3.6.1.2.1.118.1.2.2.1.9 | ColumnalarmActiveNotificationID | read-only | current | The NOTIFICATION-TYPE object identifier of the alarm state transition that is occurring. |
| 1.3.6.1.2.1.118.1.2.2.1.10 | ColumnalarmActiveResourceId | read-only | current | This object identifies the resource under alarm. If there is no corresponding resource, then the value of this object MUST be 0.0. |
| 1.3.6.1.2.1.118.1.2.2.1.11 | ColumnalarmActiveDescription | read-only | current | This object provides a textual description of the active alarm. This text is generated dynamically by the notification generator to provide useful information … |
| 1.3.6.1.2.1.118.1.2.2.1.12 | ColumnalarmActiveLogPointer | read-only | current | A pointer to the corresponding row in a notification logging MIB where the state change notification for this active alarm is logged. If no log entry applies t… |
| 1.3.6.1.2.1.118.1.2.2.1.13 | ColumnalarmActiveModelPointer | read-only | current | A pointer to the corresponding row in the alarmModelTable for this active alarm. This points not only to the alarm model being instantiated, but also to the sp… |
| 1.3.6.1.2.1.118.1.2.2.1.14 | ColumnalarmActiveSpecificPointer | read-only | current | If no additional, model-specific, Alarm MIB is supported by the system this object is `0.0'. When a model-specific Alarm MIB is supported, this object is the i… |
| 1.3.6.1.2.1.118.1.2.3 | TablealarmActiveVariableTable | not-accessible | current | A table of variables to go with active alarm entries. |
| 1.3.6.1.2.1.118.1.2.3.1 | RowalarmActiveVariableEntry | not-accessible | current | Entries appear in this table when there are variables in the varbind list of a corresponding alarm in alarmActiveTable. Entries appear in this table as though … |
| 1.3.6.1.2.1.118.1.2.3.1.1 | ColumnalarmActiveVariableIndex | not-accessible | current | A strictly monotonically increasing integer, starting at 1 for a given alarmActiveIndex, for indexing variables within the active alarm variable list. |
| 1.3.6.1.2.1.118.1.2.3.1.2 | ColumnalarmActiveVariableID | read-only | current | The alarm variable's object identifier. |
| 1.3.6.1.2.1.118.1.2.3.1.3 | ColumnalarmActiveVariableValueType | read-only | current | The type of the value. One and only one of the value objects that follow is used for a given row in this table, based on this type. |
| 1.3.6.1.2.1.118.1.2.3.1.4 | ColumnalarmActiveVariableCounter32Val | read-only | current | The value when alarmActiveVariableType is 'counter32'. |
| 1.3.6.1.2.1.118.1.2.3.1.5 | ColumnalarmActiveVariableUnsigned32Val | read-only | current | The value when alarmActiveVariableType is 'unsigned32'. |
| 1.3.6.1.2.1.118.1.2.3.1.6 | ColumnalarmActiveVariableTimeTicksVal | read-only | current | The value when alarmActiveVariableType is 'timeTicks'. |
| 1.3.6.1.2.1.118.1.2.3.1.7 | ColumnalarmActiveVariableInteger32Val | read-only | current | The value when alarmActiveVariableType is 'integer32'. |
| 1.3.6.1.2.1.118.1.2.3.1.8 | ColumnalarmActiveVariableOctetStringVal | read-only | current | The value when alarmActiveVariableType is 'octetString'. |
| 1.3.6.1.2.1.118.1.2.3.1.9 | ColumnalarmActiveVariableIpAddressVal | read-only | current | The value when alarmActiveVariableType is 'ipAddress'. |
| 1.3.6.1.2.1.118.1.2.3.1.10 | ColumnalarmActiveVariableOidVal | read-only | current | The value when alarmActiveVariableType is 'objectId'. |
| 1.3.6.1.2.1.118.1.2.3.1.11 | ColumnalarmActiveVariableCounter64Val | read-only | current | The value when alarmActiveVariableType is 'counter64'. |
| 1.3.6.1.2.1.118.1.2.3.1.12 | ColumnalarmActiveVariableOpaqueVal | read-only | current | The value when alarmActiveVariableType is 'opaque'. Note that although RFC2578 [RFC2578] forbids the use of Opaque in 'standard' MIB modules, this particular u… |
| 1.3.6.1.2.1.118.1.2.4 | TablealarmActiveStatsTable | not-accessible | current | This table represents the alarm statistics information. |
| 1.3.6.1.2.1.118.1.2.4.1 | RowalarmActiveStatsEntry | not-accessible | current | Statistics on the current active alarms. |
| 1.3.6.1.2.1.118.1.2.4.1.1 | ColumnalarmActiveStatsActiveCurrent | read-only | current | The total number of currently active alarms on the system. |
| 1.3.6.1.2.1.118.1.2.4.1.2 | ColumnalarmActiveStatsActives | read-only | current | The total number of active alarms since system restarted. |
| 1.3.6.1.2.1.118.1.2.4.1.3 | ColumnalarmActiveStatsLastRaise | read-only | current | The value of sysUpTime at the time of the last alarm raise for this alarm list. If no alarm raises have occurred since the last re-initialization of the local … |
| 1.3.6.1.2.1.118.1.2.4.1.4 | ColumnalarmActiveStatsLastClear | read-only | current | The value of sysUpTime at the time of the last alarm clear for this alarm list. If no alarm clears have occurred since the last re-initialization of the local … |
| 1.3.6.1.2.1.118.1.2.5 | ScalaralarmActiveOverflow | read-only | current | The number of active alarms that have not been put into the alarmActiveTable since system restart as a result of extreme resource constraints. |
| 1.3.6.1.2.1.118.1.3 | NodealarmClear | |||
| 1.3.6.1.2.1.118.1.3.1 | ScalaralarmClearMaximum | read-write | current | This object specifies the maximum number of cleared alarms to store in the alarmClearTable. When this number is reached, the cleared alarms with the earliest c… |
| 1.3.6.1.2.1.118.1.3.2 | TablealarmClearTable | not-accessible | current | This table contains information on cleared alarms. |
| 1.3.6.1.2.1.118.1.3.2.1 | RowalarmClearEntry | not-accessible | current | Information on a cleared alarm. |
| 1.3.6.1.2.1.118.1.3.2.1.1 | ColumnalarmClearIndex | not-accessible | current | An integer which acts as the index of entries within the named alarm list. It wraps back to 1 after it reaches its maximum value. This object has the same valu… |
| 1.3.6.1.2.1.118.1.3.2.1.2 | ColumnalarmClearDateAndTime | not-accessible | current | The local date and time when the alarm cleared. This object facilitates retrieving all instances of alarms that have been cleared since a given point in time. … |
| 1.3.6.1.2.1.118.1.3.2.1.3 | ColumnalarmClearEngineID | read-only | current | The identification of the SNMP engine at which the alarm originated. If the alarm is from an SNMPv1 system this object is a zero length string. |
| 1.3.6.1.2.1.118.1.3.2.1.4 | ColumnalarmClearEngineAddressType | read-only | current | This object indicates what type of address is stored in the alarmActiveEngineAddress object - IPv4, IPv6, DNS, etc. |
| 1.3.6.1.2.1.118.1.3.2.1.5 | ColumnalarmClearEngineAddress | read-only | current | The Address of the SNMP engine on which the alarm was occurring. This is used to identify the source of an SNMPv1 trap, since an alarmActiveEngineId cannot be … |
| 1.3.6.1.2.1.118.1.3.2.1.6 | ColumnalarmClearContextName | read-only | current | The name of the SNMP MIB context from which the alarm came. For SNMPv1 traps this is the community string from the Trap. Note that care needs to be taken when … |
| 1.3.6.1.2.1.118.1.3.2.1.7 | ColumnalarmClearNotificationID | read-only | current | The NOTIFICATION-TYPE object identifier of the alarm clear. |
| 1.3.6.1.2.1.118.1.3.2.1.8 | ColumnalarmClearResourceId | read-only | current | This object identifies the resource that was under alarm. If there is no corresponding resource, then the value of this object MUST be 0.0. |
| 1.3.6.1.2.1.118.1.3.2.1.9 | ColumnalarmClearLogIndex | read-only | current | This number MUST be the same as the log index of the applicable row in the notification log MIB, if it exists. If no log index applies to the trap, then this o… |
| 1.3.6.1.2.1.118.1.3.2.1.10 | ColumnalarmClearModelPointer | read-only | current | A pointer to the corresponding row in the alarmModelTable for this cleared alarm. |
| 1.3.6.1.2.1.118.2 | NodealarmConformance | |||
| 1.3.6.1.2.1.118.2.1 | NodealarmCompliances | |||
| 1.3.6.1.2.1.118.2.1.1 | CompliancealarmCompliance | current | The compliance statement for systems supporting the Alarm MIB. | |
| 1.3.6.1.2.1.118.2.2 | NodealarmGroups | |||
| 1.3.6.1.2.1.118.2.2.1 | GroupalarmModelGroup | current | Alarm model group. | |
| 1.3.6.1.2.1.118.2.2.2 | GroupalarmActiveGroup | current | Active Alarm list group. | |
| 1.3.6.1.2.1.118.2.2.3 | GroupalarmActiveStatsGroup | current | Active alarm summary group. | |
| 1.3.6.1.2.1.118.2.2.4 | GroupalarmClearGroup | current | Cleared alarm group. | |
| 1.3.6.1.2.1.118.2.2.6 | GroupalarmNotificationsGroup | current | The collection of notifications that can be used to model alarms for faults lacking pre-existing notification definitions. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| LocalSnmpEngineOrZeroLenStr | OCTET STRING (SIZE(0 | 5..32)) | current | An SNMP Engine ID or a zero-length string. The instantiation of this textual convention will provide guidance on when this will be an SNMP Engine ID and when it will be a zero lengths string |
| ResourceId | current | A unique identifier for this resource. The type of the resource can be determined by looking at the OID that describes the resource. Resources must be identified in a consistent manner. For example, if this resource is … | |
| ZeroBasedCounter32 | Gauge32 | current |