ALCATEL-ENT1-DVMRP-MIB
32 objects
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): This MIB contains management information for Coronado Layer 3 Hardware Routing Engine (HRE) management. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
Imported Objects
| ALCATEL-ENT1-BASE | routingIND1Dvmrp |
| DVMRP-STD-MIB | dvmrpInterfaceEntry |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6486.801.1.2.1.10.7.1 | IdentityalcatelIND1DVMRPMIB | This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): This MIB contains manag… | ||
| 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1 | NodealcatelIND1DVMRPMIBObjects | |||
| 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1 | NodealaDvmrpGlobalConfig | |||
| 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.1 | ScalaralaDvmrpAdminStatus | read-write | current | Administratively enables/disables the DVMRP protocol on this router. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.2 | ScalaralaDvmrpRouteReportInterval | read-write | current | The Route Report Interval determines how often a router will send its complete routing tables to neighboring routers running DVMRP. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.3 | ScalaralaDvmrpFlashUpdateInterval | read-write | current | The minimum Flash Update Interval defines how often routing table change messages are sent to neighboring DVMRP routers. Since these messages are sent between … |
| 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.4 | ScalaralaDvmrpNeighborTimeout | read-write | current | The Neighbor Timeout value specifies how long, without any activity from a neighboring DVMRP router, the router will wait before assuming that the inactive rou… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.5 | ScalaralaDvmrpRouteExpirationTimeout | read-write | current | The Route Expiration Timeout value specifies how long the router will wait before aging out a route. When this value expires, the route is advertised as inacti… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.6 | ScalaralaDvmrpRouteHoldDown | read-write | current | Specifies the time during which DVMRP routes are kept in a hold-down state. A hold-down state refers to the time that a route to an inactive network continues … |
| 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.7 | ScalaralaDvmrpNeighborProbeInterval | read-write | current | The Neighbor Probe Interval value specifies how often probes will be transmitted to those interfaces with attached DVMRP neighbors. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.8 | ScalaralaDvmrpPruneLifetime | read-write | current | The Prune Lifetime value defines the value whereby a source-rooted multicast tree will be pruned. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.9 | ScalaralaDvmrpPruneRetransmission | read-write | current | The Prune Packet Retransmission value is the duration of time that the router will wait, if it continues to receive unwanted multicast traffic, before retransm… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.10 | ScalaralaDvmrpGraftRetransmission | read-write | current | The Graft message Retransmission value defines the duration of time that the router will wait before retransmitting a graft message, if it has not already rece… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.11 | ScalaralaDvmrpInitNbrAsSubord | read-write | current | The value true(1) indicates neighbors, on initial discovery, are considered subordinate. This means traffic may be resumed slightly quicker on network disrupti… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.12 | ScalaralaDvmrpBfdStatus | read-only | current | Enables/Disables Bfd for DVMRP Protocol. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.13 | ScalaralaDvmrpBfdAllInterfaceStatus | read-only | current | Enables/Disables Bfd for all DVMRP interfaces. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.1.14 | ScalaralaDvmrpMbrOperStatus | read-only | current | Whether MBR is currently enabled/disabled for DVMRP. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.2 | TablealaDvmrpTunnelXIfTable | not-accessible | current | A list of attributes that are associated with the internal assigned tunnel index when a DVMRP tunnel is created. This table contains additional objects that ar… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.2.1 | RowalaDvmrpTunnelXIfEntry | not-accessible | current | An entry containing additional attributes associated with a DVMRP tunnel. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.2.1.1 | ColumnalaDvmrpTunnelIndex | not-accessible | current | The tunnel index of the DVMRP tunnel. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.2.1.2 | ColumnalaDvmrpLocalIfIndex | read-only | current | The interface index of the local end-point of the DVMRP tunnel. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.4 | TablealaDvmrpIfAugTable | not-accessible | current | Expansion for Dvmrp Intf table. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.4.1 | RowalaDvmrpIfAugEntry | not-accessible | current | An entry of alaDvmrpIfAugEntry. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.4.1.1 | ColumnalaDvmrpIfBfdStatus | read-only | current | This object enables/disables BFD for this DVMRP interface. |
| 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.1.4.1.2 | ColumnalaDvmrpIfMbrDefaultInfoStatus | read-create | current | This object enables/disables DVMRP to advertise the default route on this interface. This object is only applicable if the router is operating as a Multicast B… |
| 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.2 | NodealcatelIND1DVMRPMIBConformance | |||
| 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.2.1 | NodealcatelIND1DVMRPMIBCompliances | |||
| 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.2.1.1 | CompliancealaDvmrpCompliance | current | The compliance statement for routers running DVMRP and implementing the ALCATEL-IND1-DVMRP MIB. | |
| 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.2.2 | NodealcatelIND1DVMRPMIBGroups | |||
| 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.2.2.1 | GroupalaDvmrpConfigMIBGroup | current | A collection of objects to support the management of global configuration parameters on DVMRP routers. | |
| 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.2.2.2 | GroupalaDvmrpTunnelXIfMIBGroup | current | These objects are required to provide additional information about configured DVMRP tunnels not found in the standard tunnel MIB. | |
| 1.3.6.1.4.1.6486.801.1.2.1.10.7.1.2.2.3 | GroupalaDvmrpIfConfigGroup | current | These objects are required to provide additional information about configured DVMRP interfaces not found in the standard tunnel MIB. |