ALCATEL-ENT1-E-SERVICE-MIB
84 objects
The parameters for configuration of the E-Service feature. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2006 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
Imported Objects
| ALCATEL-ENT1-BASE | softentIND1eService |
| IF-MIB | InterfaceIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6486.801.1.2.1.50.1 | IdentityalcatelIND1EServiceMIB | The parameters for configuration of the E-Service feature. The right to make changes in specification and other information contained in this document without … | ||
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1 | IdentityalcatelIND1eServiceMIBObjects | current | Branch For E-Service Managed Objects. | |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1 | NodealaEService | |||
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.1 | NodealaEServiceInfo | |||
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.1.1 | ScalaralaEServiceMode | read-write | current | The current mode configured for Vlan Stacking and Layer 2 tunnel configuration. legacyMode (1) indicates that the commands from AlcatelIND1VLANStacking.mib are… |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.2 | TablealaEServiceSapProfileTable | not-accessible | current | A table that contains service profiles containing performance and control attributes. An entry in this table is created when a new service profile is defined. |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.2.1 | RowalaEServiceSapProfileEntry | not-accessible | current | A E-Service Service Profile entry. |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.2.1.1 | ColumnalaEServiceSapProfileID | not-accessible | current | A label given to uniquely identify this profile. Must be at least one character long. |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.2.1.2 | ColumnalaEServiceSapProfileCVLANTreatment | read-create | current | The type of VLAN stacking operation to be performed on a customer frame entering this service. Stack Svlan (1) indicates that the SVLAN is to be pre-pended on … |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.2.1.3 | ColumnalaEServiceSapProfileReplacementCVLAN | read-create | current | The CVLAN ID to use when using the Change CVLAN treatment mode. |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.2.1.4 | ColumnalaEServiceSapProfilePriorityMapMode | read-create | current | This object describes the source of the value for the priority field of the SVLAN 802.1Q tag when pre-pended to the customer data frame.NotAssigned(0), MapInne… |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.2.1.5 | ColumnalaEServiceSapProfileFixedPriority | read-create | current | This object describes the value of the priority field of the 802.1Q SVLAN tag pre-pended to customer data frames when the fixed priority mapping mode is select… |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.2.1.6 | ColumnalaEServiceSapProfileIngressBW | read-create | current | This object describes this limit of ingress bandwidth for the traffic to which this profile is applied. If 0, no bandwidth limit is applied. This number repres… |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.2.1.7 | ColumnalaEServiceSapProfileBandwidthShare | read-create | current | This object describes the use of the bandwidth limit in how it is applied across multiple ports of the SAP. If set to notApplicable(0), the SAP is not used. If… |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.2.1.8 | ColumnalaEServiceSapProfileRowStatus | read-create | current | The status of this table entry. |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.2.1.9 | ColumnalaEServiceSapProfileEgressBW | read-create | current | This object describes this limit of egress bandwidth for each UNI of the SAP to which this profile is applied. If 0, no bandwidth limit is applied. This number… |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3 | TablealaEServiceUNIProfileTable | not-accessible | current | A table that contains service profiles containing performance and control attributes. An entry in this table is created when a new service profile is defined. |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3.1 | RowalaEServiceUNIProfileEntry | not-accessible | current | A E-Service Service Profile entry. |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3.1.1 | ColumnalaEServiceUNIProfileID | not-accessible | current | A label given to uniquely identify this profile. Must be at least one character long. |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3.1.2 | ColumnalaEServiceUNIProfileStpBpduTreatment | read-create | current | This object describes the behavior of the bridge in regards to the spanning tree protocol BPDU received on the UNI. Tunnel (1) enables the PDU to be tunneled a… |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3.1.3 | ColumnalaEServiceUNIProfile8021xTreatment | read-create | current | This object describes the behavior of the bridge in regards to the IEEE 802.1x PDU frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across… |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3.1.4 | ColumnalaEServiceUNIProfile8021ABTreatment | read-create | current | This object describes the behavior of the bridge in regards to the IEEE 802.1AB PDU frames received on the UNI. Tunnel (1) enables the PDU to be tunneled acros… |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3.1.5 | ColumnalaEServiceUNIProfile8023adTreatment | read-create | current | This object describes the behavior of the bridge in regards to the IEEE 802.1ad PDU frames received on the UNI. Tunnel (1) enables the PDU to be tunneled acros… |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3.1.6 | ColumnalaEServiceUNIProfileGvrpTreatment | read-create | deprecated | This object describes the behavior of the bridge in regards to the GVRP PDU frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across the pr… |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3.1.7 | ColumnalaEServiceUNIProfileAmapTreatment | read-create | current | This object describes the behavior of the bridge in regards to the Alcatel propietary AMAP PDU frames received on the UNI. Tunnel (1) enables the PDU to be tun… |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3.1.8 | ColumnalaEServiceUNIProfileMvrpTreatment | read-create | current | This object describes the behavior of the bridge in regards to the MVRP PDU frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across the pr… |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.3.1.9 | ColumnalaEServiceUNIProfileRowStatus | read-create | current | The status of this table entry. |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.4 | TablealaEServiceTable | not-accessible | current | A table that contains the services and their assigned SVLAN for the E-Service feature. |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.4.1 | RowalaEServiceEntry | not-accessible | current | The svlan/ipmvlan-port association. |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.4.1.1 | ColumnalaEServiceID | not-accessible | current | A label given to uniquely identify this Service. Must be at least one character long. |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.4.1.2 | ColumnalaEServiceSVLAN | read-create | current | The SVLAN number of the SVLAN chosen to the be transport for this service. |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.4.1.3 | ColumnalaEServiceVlanType | read-create | current | The type of the vlan this service is going to attach to. When creating the service, the type should match the vlanId specified in the request. |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.4.1.4 | ColumnalaEServiceRowStatus | read-create | current | The status of this table entry. The supported value for set are createAndGo (4) and destroy(6), to add or remove a service. When creating or deleting the servi… |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.5 | TablealaEServiceSapTable | not-accessible | current | A table that contains the Service Access Points (Sap) listed by ID. This table is used to create, delete, and modify the SAP's profile |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.5.1 | RowalaEServiceSapEntry | not-accessible | current | The list of SAP. |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.5.1.1 | ColumnalaEServiceSapID | not-accessible | current | A Number given to uniquely identify the SAP. |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.5.1.2 | ColumnalaEServiceSapServiceID | read-create | current | A label given to uniquely identify the Service this SAP is for. Must be at least one character long. |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.5.1.3 | ColumnalaEServiceSapProfile | read-create | current | The string identifying the SAP Profile this sap is to use. If specified, must match an existing SAP Profile. |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.5.1.4 | ColumnalaEServiceSapRowStatus | read-create | current | The status of this table entry. The supported value for set are createAndGo (4) and destroy(6), to add or remove a sap. When creating the sap, the user needs t… |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.6 | TablealaEServiceSapCvlanTable | not-accessible | current | A table that contains the Service Access Points (Sap) where the CVLANs are bound to their service. |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.6.1 | RowalaEServiceSapCvlanEntry | not-accessible | current | The CVLAN to Sap binding. |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.6.1.1 | ColumnalaEServiceSapCvlanSapID | not-accessible | current | A Number given to uniquely identify this SAP. |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.6.1.2 | ColumnalaEServiceSapCvlanCvlan | not-accessible | current | This object is the CVLAN ID that this binding is targeted at. The CVLAN ID may be 0, which indicates an all or untagged only mapping type. |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.6.1.3 | ColumnalaEServiceSapCvlanMapType | read-create | current | This object is the mapping type that defines what CVLANs are mapped into this service. Multiple mappings can be defined for CVLAN to service, however only one … |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.6.1.4 | ColumnalaEServiceSapCvlanRowStatus | read-create | current | The status of this table entry. The supported value for set are createAndGo (4) and destroy(6), to add or remove a SAP. |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.7 | TablealaEServicePortTable | not-accessible | current | A table that contains the ports used by the EService feature. Both UNI and NNI are listed here. |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.7.1 | RowalaEServicePortEntry | not-accessible | current | The list of ports being used by EService. |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.7.1.1 | ColumnalaEServicePortID | not-accessible | current | The IfIndex of this UNI or NNI Port. |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.7.1.2 | ColumnalaEServicePortType | read-create | current | The type of port for Vlan Stacking operation. uni (1) represents a customer facing port on which traffic may enter the E-Service. nni (2) respresents a provide… |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.7.1.3 | ColumnalaEServicePortVendorTpid | read-create | current | he TPID for this port if type is NNI. It is used for the incoming data traffic parsing and it is substituted to the 802.1Q standard Tpid for the outgoing data … |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.7.1.4 | ColumnalaEServicePortLegacyStpBpdu | read-create | current | The legacy STP BPDU treatment for this port if NNI. It defines the type of processing applied to STP legacy BPDUs on network ports. Legacy BPDU refer to conven… |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.7.1.5 | ColumnalaEServicePortLegacyGvrpPdu | read-create | deprecated | The legacy GVRP PDU treatment for this port if NNI. It defines the type of processing applied to GVRP PDUs on network ports. |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.7.1.6 | ColumnalaEServicePortUniProfile | read-create | current | The label of an existing UNI profile that which contains various properties to be applied to this port if UNI. |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.7.1.7 | ColumnalaEServicePortTransBridging | read-create | current | The Transparent Bridging status for the nni Port. |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.7.1.8 | ColumnalaEServicePortLegacyMvrpPdu | read-create | current | The legacy MVRP PDU treatment for this port if NNI. It defines the type of processing applied to MVRP PDUs on network ports. |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.7.1.9 | ColumnalaEServicePortRowStatus | read-create | current | The status of this table entry. The supported value for set are createAndGo (4) and destroy(6), to add or remove a binding |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.8 | TablealaEServiceSapUniTable | not-accessible | current | A table that contains the UNI that are bound to each SAP for classifying traffic into each EService. Not that writing to this table may create a new UNI. |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.8.1 | RowalaEServiceSapUniEntry | not-accessible | current | The list of SAP-UNI bindings being used by EService. |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.8.1.1 | ColumnalaEServiceSapUniSap | not-accessible | current | The SAP ID that is configured onto this port. |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.8.1.2 | ColumnalaEServiceSapUniUni | not-accessible | current | The IfIndex of this UNI Port. |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.8.1.3 | ColumnalaEServiceSapUniRowStatus | read-create | current | The status of this table entry. The supported value for set are createAndGo (4) and destroy(6), to add or remove a binding |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.9 | TablealaEServiceNniSvlanTable | not-accessible | current | A table that contains the SVLANs bound to each NNI for use by the EService feature. |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.9.1 | RowalaEServiceNniSvlanEntry | not-accessible | current | The list of NNI-SVLAN bindings being used by EService. |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.9.1.1 | ColumnalaEServiceNniSvlanNni | not-accessible | current | The IfIndex of this NNI Port. |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.9.1.2 | ColumnalaEServiceNniSvlanSvlan | not-accessible | current | The SVLAN bound to this port. SVLAN cannot be 1. |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.9.1.3 | ColumnalaEServiceNniSvlanRowStatus | read-create | current | The status of this table entry. The supported value for set are createAndGo (4) and destroy(6), to add or remove a binding |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.9.1.4 | ColumnalaEServiceNniSvlanVpaType | read-create | current | The object is used to specify whether the VPA state is to be controlled by an ERP or a STP. By default VPA state is controlled by STP. |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.10 | NodealaEServiceGlobals | |||
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.1.1.10.1 | ScalaralaEServiceGlobalTransBridging | read-write | current | The global transparent bridging status. |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.2 | IdentityalcatelIND1EServiceMIBConformance | current | Branch For E-Service Conformance Information. | |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.2.1 | IdentityalcatelIND1EServiceMIBGroups | current | Branch For E-Service Units Of Conformance. | |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.2.1.1 | GroupalaEServiceSapProfileGroup | current | Collection of objects for management of E-Service Sap Profiles. | |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.2.1.2 | GroupalaEServiceUNIProfileGroup | current | Collection of objects for management of EService UNI Profiles. | |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.2.1.3 | GroupalaEServiceGroup | current | Collection of objects for management of E-Services. | |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.2.1.4 | GroupalaEServiceSapGroup | current | Collection of objects for management of E-Service SAPs. | |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.2.1.5 | GroupalaEServiceSapCvlanGroup | current | Collection of objects for management of E-Service SAP CVLAN bindings. | |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.2.1.6 | GroupalaEServicePortGroup | current | Collection of objects for management of E-Service Ports. | |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.2.1.7 | GroupalaEServiceSapUniGroup | current | Collection of objects for management of E-Service SAP to UNI Binding. | |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.2.1.8 | GroupalaEServiceNniSvlanGroup | current | Collection of objects for management of E-Service SVLAN to NNI Binding. | |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.2.1.9 | GroupalaEServiceInfoGroup | current | Collection of objects for management of E-Service Info Binding. | |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.2.1.10 | GroupalaEServiceGlobalGroup | current | Collection of objects for management of E-Service global configuration. | |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.2.2 | IdentityalcatelIND1EServiceMIBCompliances | current | Branch For E-Service Compliance Statements. | |
| 1.3.6.1.4.1.6486.801.1.2.1.50.1.2.2.1 | CompliancealcatelIND1EServiceMIBCompliance | current | Compliance statement for E-Service. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AlaEServiceUNIProfileProtocolTreatment | INTEGER { tunnel (1), drop (2), peer (3) } alcatelIND1eServiceMIBObjects OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For E-Service Managed Objects." ::= { alcatelIND1EServiceMIB 1 } alcatelIND1EServiceMIBConformance OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For E-Service Conformance Information." ::= { alcatelIND1EServiceMIB 2 } alcatelIND1EServiceMIBGroups OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For E-Service Units Of Conformance." ::= { alcatelIND1EServiceMIBConformance 1 } alcatelIND1EServiceMIBCompliances OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For E-Service Compliance Statements." ::= { alcatelIND1EServiceMIBConformance 2 } | current | The behavior of the bridge in regards to the given protocols packets received on the UNI. Tunnel (1) enables the packets to be tunneled across the provider network. Discard (2) causes the packets to be discarded and not… |