ALCATEL-ENT1-LBD-MIB
67 objects
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line LBD for detection loopback. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2002 Alcatel Internetworking, Incorporated ALL RIGHTS RESERVED WORLDWIDE
Imported Objects
| ALCATEL-ENT1-BASE | softentIND1Lbd |
| IF-MIB | InterfaceIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | MacAddress RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6486.801.1.2.1.82.1 | IdentityalcatelIND1LBDMIB | This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey P… | ||
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.0 | IdentityalaLbdTraps | current | Branch For Loopback-Detection Subsystem MIB Notifications. | |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.0.1 | NotificationalaLbdStateChangeToShutdown | current | When the port state becomes shutdown, a notification is sent to the Management Entity with the LBD-state information. | |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.0.2 | NotificationalaLbdStateChangeForClearViolationAll | current | When the the port state changes from shutdown due to clear-violation-all, a notification is sent to the Management Entity, with the LBD-state information. | |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.0.3 | NotificationalaLbdStateChangeForAutoRecovery | current | When the port state changes from shutdown due to auto-recovery mechanism, a notification is sent to the Management Entity with the LBD-state information. | |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.1 | IdentityalcatelIND1LBDMIBObjects | current | Branch For Loopback-Detection Subsystem Managed Objects. | |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.1.1 | ScalaralaLbdGlobalConfigStatus | read-write | current | This object is used to enable or disable LBD on the switch. The value enable (1) indicates that LBD should be enabled on the switch. The value disable (2) is u… |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.1.2 | ScalaralaLbdGlobalConfigTransmissionTimer | read-write | current | This object is used to set the transmission timer for LBD feature for PORT globally. It is allowed to modify the timer at any instance but the new timer value … |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.1.3 | ScalaralaLbdGlobalClearPortStat | read-write | current | Defines the global clear statistics control for port for LBD. default(0) - default value for this object, reset(1) - indicates that LBD should clear all statis… |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.1.4 | ScalaralaLbdGlobalConfigAutorecoveryTimer | read-write | current | This object is used to make up all the disabled ports which was caused due to loop-back detection. Auto recovery can be disabled by Setting this value to 0 sec |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.1.5 | NodealaLbdPortConfig | |||
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.1.5.1 | TablealaLbdPortConfigTable | not-accessible | current | A table containing LBD user port configuration information. |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.1.5.1.1 | RowalaLbdPortConfigEntry | not-accessible | current | A LBD user port configuration entry. |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.1.5.1.1.1 | ColumnalaLbdPortConfigIfIndex | not-accessible | current | The physical identification number for this port. |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.1.5.1.1.2 | ColumnalaLbdPortConfigLbdAdminStatus | read-write | current | This object is used to enable or disable loopback-detection per port. The value enable(1) indicates that loopback-detection is enabled on this port. The value … |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.1.5.1.1.3 | ColumnalaLbdPortConfigLbdOperStatus | read-only | current | This object specifies the current operational state of the corresponding port. |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.1.5.1.1.4 | ColumnalaLbdPortConfigServiceAccessType | read-write | current | This object specifies the type of service access port. port. |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.1.5.1.1.5 | ColumnalaLbdPortAFDConfig | read-only | current | Configuration is made by admin or auto-fabric on this interface |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.1.5.1.1.6 | ColumnalaLbdPortRemoteConfigAdminStatus | read-write | current | This object is used to enable or disable remote-origin loopback-detection per port. The value enable(1) indicates that remote loopback-detection is enabled on … |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.1.5.1.1.7 | ColumnalaLbdPortRemoteSrcMacAddr | read-only | current | This object denotes the remote source mac address which gets populated during lbd shutdown due to remote violation. |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.1.5.1.1.8 | ColumnalaLbdPortRemoteBridgeID | read-only | current | This object denotes the remote bridgeId which gets populated during lbd shutdown due to remote violation. |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.1.6 | NodealaLbdPortStat | |||
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.1.6.1 | TablealaLbdPortStatsTable | not-accessible | current | A table containing Loop Back Detection information. |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.1.6.1.1 | RowalaLbdPortStatsEntry | not-accessible | current | A LBD Statistics entry on per port. |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.1.6.1.1.1 | ColumnalaLbdPortStatsIfIndex | not-accessible | current | The ifindex of the port on which LBD is running. |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.1.6.1.1.2 | ColumnalaLbdPortNumLbdInvalidRcvd | read-only | current | Number of Invalid packets received by a port. |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.1.6.1.1.3 | ColumnalaLbdPortLbdSent | read-only | current | Number of LBD packets sent by a port. |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.1.6.1.1.4 | ColumnalaLbdPortStatsClear | read-write | current | When this object is set to reset(1), all statistics parameters corresponding to this port gets cleared (reset). |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.1.6.1.1.5 | ColumnalaLbdPortLinkAgg | read-only | current | Indicates whether the port is part of link aggregates. If it is then it shows the link aggregate id. If it is not then it shows -1 |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.1.7 | NodealaLbdTrapsObj | |||
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.1.7.1 | ScalaralaLbdPortIfIndex | accessible-for-notify | current | The ifIndex of the port on which LBD trap is raised |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.1.7.2 | ScalaralaLbdPreviousState | accessible-for-notify | current | The previous state of the port on which LBD was running. |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.1.7.3 | ScalaralaLbdCurrentState | accessible-for-notify | current | The current state of the port on which LBD was running. |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.1.7.4 | ScalaralaLbdPreviousStateClearViolationAll | accessible-for-notify | current | The state of the the port where LBD was running before clear-violation-all applied. |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.1.7.5 | ScalaralaLbdCurrentStateClearViolationAll | accessible-for-notify | current | The state of the the port where LBD was running after clear-violation-all applied. |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.1.7.6 | ScalaralaLbdPreviousStateAutoRecovery | accessible-for-notify | current | The state of the the port where LBD was running before auto-recovery. |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.1.7.7 | ScalaralaLbdCurrentStateAutoRecovery | accessible-for-notify | current | The state of the the port where LBD was running after auto-recovery. |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.1.8 | ScalaralaLbdGlobalStatusAFDConfig | read-only | current | Global Enable of LBD is done by admin or auto-fabric |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.1.9 | ScalaralaLbdVlanGlobalConfigTransmissionTimer | read-write | current | This object is used to set the transmission timer for LBD feature for VLAN globally. It is allowed to modify the timer at any instance but the new timer value … |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.1.10 | ScalaralaLbdVlanConfigLbdAdminStatus | read-write | current | This object is used to enable or disable loopback-detection Vlan. The value enable(1) indicates that loopback-detection is enabled on this vlan. The value disa… |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.1.11 | ScalaralaLbdVlanConfigAllVlan | read-write | current | This object is used to enable or disable loopback-detection on all Vlans. The value enable(1) indicates that loopback-detection is enabled on on all vlans. The… |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.1.12 | NodealaLbdVlanConfig | |||
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.1.12.1 | TablealaLbdVlanTable | not-accessible | current | A table that contains the LBD Vlan configuration Information |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.1.12.1.1 | RowalaLbdVlanEntry | not-accessible | current | |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.1.12.1.1.1 | ColumnalaLbdVlanId | not-accessible | current | This object is the VLAN ID that is enabled LBD. |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.1.12.1.1.2 | ColumnalaLbdVlanStatus | read-create | current | The status of this table entry. The supported value for set are createAndGo (4) and destroy(6), to add or remove VLAN/VLANS to/from LBD. |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.1.13 | NodealaLbdVlanViolationStatistics | |||
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.1.13.1 | TablealaLbdVlanViolationStatisticsTable | not-accessible | current | A table that contains the violation of the Port/Linkagg and the vlan on which it got violated |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.1.13.1.1 | RowalaLbdVlanViolationStatisticsEntry | not-accessible | current | |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.1.13.1.1.1 | ColumnalaLbdVlanIfindex | not-accessible | current | The ifIndex component of this instance. |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.1.13.1.1.2 | ColumnalaLbdViolatedVlanId | read-only | current | The VlanId for which the current instance is in violation |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.1.14 | ScalaralaLbdGlobalRemoteConfigStatus | read-write | current | This object is used for enabling or disabling the processing of LBD frames originating from a different system (non local origin). On enable : The switch proce… |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.2 | IdentityalcatelIND1LBDMIBConformance | current | Branch for LBD Module MIB Subsystem Conformance Information. | |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.2.1 | IdentityalcatelIND1LBDMIBGroups | current | Branch for LBD Module MIB Subsystem Units of Conformance. | |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.2.1.1 | GroupalaLbdGlobalConfigGroup | current | Collection of objects for management of LBD Global Configuration. | |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.2.1.2 | GroupalaLbdIntfConfigGroup | current | Collection of objects for management of LBD per port Configuration. | |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.2.1.3 | GroupalaLbdPortStatusGroup | current | Collection of objects for LBD Statistics information. | |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.2.1.4 | GroupalaLbdStateTrapToShutdownGroup | current | Collection of objects for LBD State change to shutdown Traps . | |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.2.1.5 | GroupalaLbdStateTrapForClearViolationAllGroup | current | Collection of objects for LBD State Traps due to issuing clear-violation-all. | |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.2.1.6 | GroupalaLbdStateTrapForAutoRecoveryGroup | current | Collection of objects for LBD State Traps due to auto-recovery mechanism. | |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.2.1.7 | GroupalaLbdTrapsGroup | current | ||
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.2.1.8 | GroupalaLbdVlanConfigGroup | current | Collection of objects for management of LBD per port Configuration. | |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.2.1.9 | GroupalaLbdVlanViolationStatisticsGroup | current | Collection of objects for vlan violation statistics. | |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.2.2 | IdentityalcatelIND1LBDMIBCompliances | current | Branch for LBD Module MIB Subsystem Compliance Statements. | |
| 1.3.6.1.4.1.6486.801.1.2.1.82.1.2.2.1 | CompliancealcatelIND1LBDMIBCompliance | current | Compliance statement for LBD. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AlaLbdCurrentStateCVAorAR | INTEGER { inactive (0), normal (1) } | current | Specifies the state of the port, where LBD was running, after auto-recovery or issuing clear-violation-all. |
| AlaLbdPortConfigLbdOperStatus | INTEGER { inactive (0), normal (1), shutdown (2), remoteShutdown (3) } | current | Specifies the current operational state of this port. |