ALCATEL-ENT1-QOS-MIB

831 objects

QoS and Filtering MIB

Imported Objects

ALCATEL-ENT1-BASE	softentIND1QoS
IF-MIB	InterfaceIndex
INET-ADDRESS-MIB	InetAddress InetAddressType
IPV6-TC	Ipv6Address Ipv6IfIndexOrZero
SNMP-FRAMEWORK-MIB	SnmpAdminString
SNMPv2-CONF	MODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMI	Counter32 Counter64 Integer32 IpAddress MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE Unsigned32
SNMPv2-TC	MacAddress RowStatus

OID	Name	Access	Status	Description
1.3.6.1.4.1.6486.801.1.2.1.22.1	IdentityalaQoSMIB			QoS and Filtering MIB
1.3.6.1.4.1.6486.801.1.2.1.22.1.1	IdentityalaQoSMIBObjects		current	Branch for QoS Managed Objects.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1	TablealaQoSRuleTable	not-accessible	current	Table of QoS Rule definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1	RowalaQoSRuleEntry	not-accessible	current	Definition of QoS Rule
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.1	ColumnalaQoSRuleName	not-accessible	current	Name of rule
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.2	ColumnalaQoSRuleEnabled	read-create	current	Is this rule enabled or not
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.3	ColumnalaQoSRuleSource	read-create	current	What entity created the rule.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.4	ColumnalaQoSRulePrecedence	read-create	current	Precedence value for rule. Rules are evaluated from higher precedence to lower. If rules have equal precedence, they are evaluated in the order they are receiv…
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.5	ColumnalaQoSRuleCondition	read-create	current	Name of the condition to use
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.6	ColumnalaQoSRuleAction	read-create	current	Name of the action to use
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.7	ColumnalaQoSRuleReflexive	read-create	current	Indicator to tell if the rule is reflexive. Reflexive rules allow specific return connections that would normally be denied.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.8	ColumnalaQoSRuleSave	read-create	current	Indicator to tell whether to write out the rule during snapshot commands.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.9	ColumnalaQoSRuleLog	read-create	current	Indicator to tell whether to log matches to this rule in the QoS log.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.10	ColumnalaQoSRuleEnforced	read-only	current	Is this rule currenly being enforced on the switch.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.11	ColumnalaQoSRuleActive	read-only	current	Is this rule enforcable by the switch.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.12	ColumnalaQoSRuleRowStatus	read-create	current	Used to create/delete rules according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.13	ColumnalaQoSRuleValidityPeriod	read-create	current	Name of the validity period to use
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.14	ColumnalaQoSRuleValidityPeriodStatus	read-create	current	Status field indicating whether there is a validity period associated with this rule
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.15	ColumnalaQoSRuleLogInterval	read-create	current	How often to look for packets matching this rule when logging. When 0 log as many as possible.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.16	ColumnalaQoSRuleCountType	read-create	current	Which rule statistics counters to update if not all are available
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.17	ColumnalaQoSRulePacketCount	read-only	current	Counter for packets patching this rule
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.18	ColumnalaQoSRuleByteCount	read-only	current	Counter for bytes matching this rule
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.19	ColumnalaQoSRuleType	read-only	current	The type of rule this is. Each bit represents the following: 0x1 = bridged 0x2 = routed 0x4 = multicast
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.20	ColumnalaQoSRuleTrapEvents	read-create	current	Send SNMP trap when 'qos user-port shutdown' param or rule having action=port-disable is matched/invoked?
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.21	ColumnalaQoSRuleDefaultList	read-create	current	This rule belongs to the default policy list.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.22	ColumnalaQoSRuleGreenPacketCount	read-only	current	Counter for the number of packets being green compliant.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.23	ColumnalaQoSRuleYellowPacketCount	read-only	current	Counter for the number of packets being yellow compliant.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.24	ColumnalaQoSRuleRedPacketCount	read-only	current	Counter for the number of packets being red compliant.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.25	ColumnalaQoSRuleGreenByteCount	read-only	current	Counter for the number of packets being green compliant.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.26	ColumnalaQoSRuleYellowByteCount	read-only	current	Counter for the number of packets being yellow compliant.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.1.1.27	ColumnalaQoSRuleRedByteCount	read-only	current	Counter for the number of packets being red compliant.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2	TablealaQoSAppliedRuleTable	not-accessible	current	Table of QoS AppliedRule definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1	RowalaQoSAppliedRuleEntry	not-accessible	current	Definition of QoS AppliedRule
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.1	ColumnalaQoSAppliedRuleName	not-accessible	current	Name of rule
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.2	ColumnalaQoSAppliedRuleEnabled	read-only	current	Is this rule enabled or not
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.3	ColumnalaQoSAppliedRuleSource	read-only	current	What entity created the rule.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.4	ColumnalaQoSAppliedRulePrecedence	read-only	current	Precedence value for rule. Rules are evaluated from higher precedence to lower. If rules have equal precedence, they are evaluated in the order they are receiv…
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.5	ColumnalaQoSAppliedRuleCondition	read-only	current	Name of the condition to use
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.6	ColumnalaQoSAppliedRuleAction	read-only	current	Name of the action to use
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.7	ColumnalaQoSAppliedRuleReflexive	read-only	current	Indicator to tell if the rule is reflexive. Reflexive rules allow specific return connections that would normally be denied.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.8	ColumnalaQoSAppliedRuleSave	read-only	current	Indicator to tell whether to write out the rule during snapshot commands.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.9	ColumnalaQoSAppliedRuleLog	read-only	current	Indicator to tell whether to log matches to this rule in the QoS log.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.10	ColumnalaQoSAppliedRuleEnforced	read-only	current	Is this rule currenly being enforced on the switch.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.11	ColumnalaQoSAppliedRuleActive	read-only	current	Is this rule enforcable by the switch.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.12	ColumnalaQoSAppliedRuleRowStatus	read-only	current	Used to create/delete rules according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.13	ColumnalaQoSAppliedRuleValidityPeriod	read-only	current	Name of the validity period to use
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.14	ColumnalaQoSAppliedRuleValidityPeriodStatus	read-only	current	Status field indicating whether there is a validity period associated with this rule
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.15	ColumnalaQoSAppliedRuleLogInterval	read-only	current	How often to look for packets matching this rule when logging. When 0 log as many as possible.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.16	ColumnalaQoSAppliedRuleCountType	read-only	current	Which rule statistics counters to update if not all are available
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.17	ColumnalaQoSAppliedRulePacketCount	read-only	current	Counter for packets patching this rule
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.18	ColumnalaQoSAppliedRuleByteCount	read-only	current	Counter for bytes matching this rule
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.19	ColumnalaQoSAppliedRuleType	read-only	current	The type of rule this is. Each bit represents the following: 0x1 = bridged 0x2 = routed 0x4 = multicast
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.20	ColumnalaQoSAppliedRuleTrapEvents	read-create	current	Send SNMP trap when 'qos user-port shutdown' param or rule having action=port-disable is matched/invoked?
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.21	ColumnalaQoSAppliedRuleDefaultList	read-create	current	This rule belongs to the default policy list.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.22	ColumnalaQoSAppliedRuleGreenPacketCount	read-only	current	Counter for the number of packets being green compliant.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.23	ColumnalaQoSAppliedRuleYellowPacketCount	read-only	current	Counter for the number of packets being yellow compliant.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.24	ColumnalaQoSAppliedRuleRedPacketCount	read-only	current	Counter for the number of packets being red compliant.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.25	ColumnalaQoSAppliedRuleGreenByteCount	read-only	current	Counter for the number of packets being green compliant.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.26	ColumnalaQoSAppliedRuleYellowByteCount	read-only	current	Counter for the number of packets being yellow compliant.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.2.1.27	ColumnalaQoSAppliedRuleRedByteCount	read-only	current	Counter for the number of packets being red compliant.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3	TablealaQoSConditionTable	not-accessible	current	Table of QoS Condition definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1	RowalaQoSConditionEntry	not-accessible	current	Definition of QoS Condition
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.1	ColumnalaQoSConditionName	not-accessible	current	Name of condition
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.2	ColumnalaQoSConditionSource	read-create	current	What entity created the condition.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.3	ColumnalaQoSConditionSourceSlot	read-create	current	Source physical slot used for traffic classification When 0, the port identifies an aggregate
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.4	ColumnalaQoSConditionSourceSlotStatus	read-create	current	Status field indicating whether the source physical slot and port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.5	ColumnalaQoSConditionSourcePort	read-create	current	Source physical port range start to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.6	ColumnalaQoSConditionSourcePortGroup	read-create	current	Source physical port group to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.7	ColumnalaQoSConditionSourcePortGroupStatus	read-create	current	Status field indicating whether the source physical port group needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.8	ColumnalaQoSConditionDestinationSlot	read-create	current	Destination physical slot used for traffic classification When 0, the port identifies an aggregate
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.9	ColumnalaQoSConditionDestinationSlotStatus	read-create	current	Status field indicating whether the destination physical slot and port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.10	ColumnalaQoSConditionDestinationPort	read-create	current	Destination physical port range start to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.11	ColumnalaQoSConditionDestinationPortGroup	read-create	current	Destination physical port group to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.12	ColumnalaQoSConditionDestinationPortGroupStatus	read-create	current	Status field indicating whether the destination physical port group needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.13	ColumnalaQoSConditionSourceMacAddr	read-create	current	Source MAC address to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.14	ColumnalaQoSConditionSourceMacAddrStatus	read-create	current	Status field indicating whether the source MAC address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.15	ColumnalaQoSConditionSourceMacMask	read-create	current	Source MAC mask to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.16	ColumnalaQoSConditionSourceMacGroup	read-create	current	Source MAC group to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.17	ColumnalaQoSConditionSourceMacGroupStatus	read-create	current	Status field indicating whether the source MAC group needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.18	ColumnalaQoSConditionDestinationMacAddr	read-create	current	Destination MAC address to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.19	ColumnalaQoSConditionDestinationMacAddrStatus	read-create	current	Status field indicating whether the destination MAC address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.20	ColumnalaQoSConditionDestinationMacMask	read-create	current	Destination MAC mask to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.21	ColumnalaQoSConditionDestinationMacGroup	read-create	current	Destination MAC group to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.22	ColumnalaQoSConditionDestinationMacGroupStatus	read-create	current	Status field indicating whether the destination MAC group needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.23	ColumnalaQoSConditionSourceVlan	read-create	current	Source VLAN to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.24	ColumnalaQoSConditionSourceVlanStatus	read-create	current	Status field indicating whether the source VLAN needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.25	ColumnalaQoSConditionDestinationVlan	read-create	current	Destination VLAN to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.26	ColumnalaQoSConditionDestinationVlanStatus	read-create	current	Status field indicating whether the destination VLAN needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.27	ColumnalaQoSCondition8021p	read-create	current	802.1p value to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.28	ColumnalaQoSCondition8021pStatus	read-create	current	Status field indicating whether the 802.1p value needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.29	ColumnalaQoSConditionSourceIpAddr	read-create	current	Source IP address to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.30	ColumnalaQoSConditionSourceIpAddrStatus	read-create	current	Status field indicating whether the source IP address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.31	ColumnalaQoSConditionSourceIpMask	read-create	current	Source IP mask to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.32	ColumnalaQoSConditionSourceNetworkGroup	read-create	current	Source network group to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.33	ColumnalaQoSConditionSourceNetworkGroupStatus	read-create	current	Status field indicating whether the source network group needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.34	ColumnalaQoSConditionDestinationIpAddr	read-create	current	Destination IP address to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.35	ColumnalaQoSConditionDestinationIpAddrStatus	read-create	current	Status field indicating whether the destination IP address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.36	ColumnalaQoSConditionDestinationIpMask	read-create	current	Destination IP mask to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.37	ColumnalaQoSConditionDestinationNetworkGroup	read-create	current	Destination network group to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.38	ColumnalaQoSConditionDestinationNetworkGroupStatus	read-create	current	Status field indicating whether the destination network group needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.39	ColumnalaQoSConditionMulticastIpAddr	read-create	current	Multicast IP address to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.40	ColumnalaQoSConditionMulticastIpAddrStatus	read-create	current	Status field indicating whether the multicast IP address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.41	ColumnalaQoSConditionMulticastIpMask	read-create	current	Multicast IP mask to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.42	ColumnalaQoSConditionMulticastNetworkGroup	read-create	current	Multicast network group to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.43	ColumnalaQoSConditionMulticastNetworkGroupStatus	read-create	current	Status field indicating whether the multicast network group needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.44	ColumnalaQoSConditionTos	read-create	current	TOS value to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.45	ColumnalaQoSConditionTosStatus	read-create	current	Status field indicating whether the TOS value & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.46	ColumnalaQoSConditionTosMask	read-create	current	TOS mask to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.47	ColumnalaQoSConditionDscp	read-create	current	DSCP value to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.48	ColumnalaQoSConditionDscpStatus	read-create	current	Status field indicating whether the DSCP value & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.49	ColumnalaQoSConditionDscpMask	read-create	current	DSCP mask to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.50	ColumnalaQoSConditionIpProtocol	read-create	current	IP protocol to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.51	ColumnalaQoSConditionIpProtocolStatus	read-create	current	Status field indicating whether the IP protocol needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.52	ColumnalaQoSConditionSourceIpPort	read-create	current	Source IP port range start to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.53	ColumnalaQoSConditionSourceIpPortStatus	read-create	current	Status field indicating whether the source IP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.54	ColumnalaQoSConditionDestinationIpPort	read-create	current	Destination IP port range start to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.55	ColumnalaQoSConditionDestinationIpPortStatus	read-create	current	Status field indicating whether the destination IP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.56	ColumnalaQoSConditionService	read-create	current	Name of service to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.57	ColumnalaQoSConditionServiceStatus	read-create	current	Status field indicating whether the service needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.58	ColumnalaQoSConditionServiceGroup	read-create	current	Name of service group to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.59	ColumnalaQoSConditionServiceGroupStatus	read-create	current	Status field indicating whether the service group needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.60	ColumnalaQoSConditionIcmpType	read-create	current	ICMP type to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.61	ColumnalaQoSConditionIcmpTypeStatus	read-create	current	Status field indicating whether the ICMP type needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.62	ColumnalaQoSConditionIcmpCode	read-create	current	ICMP code to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.63	ColumnalaQoSConditionIcmpCodeStatus	read-create	current	Status field indicating whether the ICMP code needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.64	ColumnalaQoSConditionRowStatus	read-create	current	Used to create/delete conditions according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.65	ColumnalaQoSConditionSourcePortEnd	read-create	current	Source physical port range end to use for traffic classification. Must be greater than port range start to indicate a range. When '1', use source port as a sin…
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.66	ColumnalaQoSConditionDestinationPortEnd	read-create	current	Destination physical port range end to use for traffic classification. Must be greater than port range start to indicate a range. When '1', use destination por…
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.67	ColumnalaQoSConditionSourceIpPortEnd	read-create	current	Source IP port range end to use for traffic classification. Must be greater than source IP port range start to indicate a range. When '0', use source IP port a…
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.68	ColumnalaQoSConditionDestinationIpPortEnd	read-create	current	Destination IP port range end to use for traffic classification. Must be greater than destination IP port range start to indicate a range. When '0', use destin…
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.69	ColumnalaQoSConditionSourceTcpPort	read-create	current	Source TCP port range start to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.70	ColumnalaQoSConditionSourceTcpPortStatus	read-create	current	Status field indicating whether the source TCP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.71	ColumnalaQoSConditionSourceTcpPortEnd	read-create	current	Source TCP port range end to use for traffic classification. Must be greater than source TCP port range start to indicate a range. When '0', use source TCP por…
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.72	ColumnalaQoSConditionDestinationTcpPort	read-create	current	Destination TCP port range start to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.73	ColumnalaQoSConditionDestinationTcpPortStatus	read-create	current	Status field indicating whether the destination TCP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.74	ColumnalaQoSConditionDestinationTcpPortEnd	read-create	current	Destination TCP port range end to use for traffic classification. Must be greater than destination TCP port range start to indicate a range. When '0', use dest…
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.75	ColumnalaQoSConditionSourceUdpPort	read-create	current	Source UDP port range start to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.76	ColumnalaQoSConditionSourceUdpPortStatus	read-create	current	Status field indicating whether the source UDP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.77	ColumnalaQoSConditionSourceUdpPortEnd	read-create	current	Source UDP port range end to use for traffic classification. Must be greater than source UDP port range start to indicate a range. When '0', use source UDP por…
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.78	ColumnalaQoSConditionDestinationUdpPort	read-create	current	Destination UDP port range start to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.79	ColumnalaQoSConditionDestinationUdpPortStatus	read-create	current	Status field indicating whether the destination UDP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.80	ColumnalaQoSConditionDestinationUdpPortEnd	read-create	current	Destination UDP port range end to use for traffic classification. Must be greater than destination UDP port range start to indicate a range. When '0', use dest…
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.81	ColumnalaQoSConditionEthertype	read-create	current	Ethertype value to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.82	ColumnalaQoSConditionEthertypeStatus	read-create	current	Status field indicating whether the ethertype value needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.83	ColumnalaQoSConditionTcpFlags	read-create	current	Use any/all specifieid TCP flags for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.84	ColumnalaQoSConditionTcpFlagsStatus	read-create	current	Status field indicating whether the TCP flag bits needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.85	ColumnalaQoSConditionTcpFlagsVal	read-create	current	TCP flags values used for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.86	ColumnalaQoSConditionTcpFlagsValStatus	read-create	current	Not used
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.87	ColumnalaQoSConditionTcpFlagsMask	read-create	current	Mask of TCP flags bits used for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.88	ColumnalaQoSConditionTcpFlagsMaskStatus	read-create	current	Not used
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.89	ColumnalaQoSConditionTcpEstablished	read-create	current	Look for established TCP sessions in classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.90	ColumnalaQoSConditionSourceIpv6Addr	read-create	current	Source IPv6 address to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.91	ColumnalaQoSConditionSourceIpv6AddrStatus	read-create	current	Status field indicating whether the source IPv6 address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.92	ColumnalaQoSConditionSourceIpv6Mask	read-create	current	Source IPv6 mask to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.93	ColumnalaQoSConditionDestinationIpv6Addr	read-create	current	Destination IPv6 address to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.94	ColumnalaQoSConditionDestinationIpv6AddrStatus	read-create	current	Status field indicating whether the destination IPv6 address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.95	ColumnalaQoSConditionDestinationIpv6Mask	read-create	current	Destination IPv6 mask to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.96	ColumnalaQoSConditionIpv6Traffic	read-create	current	classify IPV6 traffic
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.97	ColumnalaQoSConditionIpv6NH	read-create	current	NH value to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.98	ColumnalaQoSConditionIpv6NHStatus	read-create	current	Status field indicating whether the NH value needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.99	ColumnalaQoSConditionIpv6FlowLabel	read-create	current	FL value to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.100	ColumnalaQoSConditionIpv6FlowLabelStatus	read-create	current	Status field indicating whether the flow label value needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.101	ColumnalaQoSConditionMcastIpv6Addr	read-create	current	Multicast IPv6 address to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.102	ColumnalaQoSConditionMcastIpv6AddrStatus	read-create	current	Status field indicating whether the multicast IPv6 address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.103	ColumnalaQoSConditionMcastIpv6Mask	read-create	current	Multicast IPv6 mask to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.104	ColumnalaQoSConditionDscpEnd	read-create	current	DSCP value to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.105	ColumnalaQoSConditionInnerSourceVlan	read-create	current	Customer VLAN to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.106	ColumnalaQoSConditionInnerSourceVlanStatus	read-create	current	Status field indicating whether the inner VLAN needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.107	ColumnalaQoSConditionInner8021p	read-create	current	Customer 802.1p to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.108	ColumnalaQoSConditionInner8021pStatus	read-create	current	Status field indicating whether the inner 802.1p needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.109	ColumnalaQoSConditionVrfName	read-create	current	Name of Vrf to match traffic in
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.110	ColumnalaQoSConditionVrfNameStatus	read-create	current	Status field indicating whether the traffic from a specific vrf needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.111	ColumnalaQoSConditionFragments	read-create	current	TCP packet fragments
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.112	ColumnalaQoSConditionSourceChassis	read-create	current	Source physical chassis used for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.113	ColumnalaQoSConditionDestinationChassis	read-create	current	Destination physical chassis used for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.114	ColumnalaQoSConditionAppFpGroup	read-create	current	Application Fingerprinting group.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.115	ColumnalaQoSConditionAppFpGroupStatus	read-create	current	Status field indicating whether the traffic from a specific Application Fingerprinting Group needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.116	ColumnalaQoSConditionSIP	read-create	current	SIP type to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.117	ColumnalaQoSConditionSIPStatus	read-create	current	SIP Status field indicates whether SIP is enabled or disabled for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.118	ColumnalaQoSConditionDPIAppName	read-create	current	DPI Application Name associated with a policy condition.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.119	ColumnalaQoSConditionDPIGrpName	read-create	current	DPI Group Name associated with a policy condition.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.120	ColumnalaQoSConditionDPIAppNameStatus	read-create	current	DPI Status field indicates whether DPI Application Name is enabled or disabled for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.121	ColumnalaQoSConditionDPIAppGroupStatus	read-create	current	DPI Status field indicates whether DPI Application Group is enabled or disabled for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.122	ColumnalaQoSConditionVxlanVni	read-create	current
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.123	ColumnalaQoSConditionVxlanVniStatus	read-create	current	Status field indicating whether the VNI needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.124	ColumnalaQoSConditionVxlanPort	read-create	current
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.125	ColumnalaQoSConditionVxlanPortStatus	read-create	current	Status field indicating whether the VXLAN Port needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.126	ColumnalaQoSConditionVmSourceMacAddr	read-create	current	Source MAC address to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.127	ColumnalaQoSConditionVmSourceMacAddrStatus	read-create	current	Status field indicating whether the source MAC address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.128	ColumnalaQoSConditionVmSourceMacMask	read-create	current	Source MAC mask to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.129	ColumnalaQoSConditionVmSourceIpAddr	read-create	current	Source IP address to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.130	ColumnalaQoSConditionVmSourceIpAddrStatus	read-create	current	Status field indicating whether the source IP address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.131	ColumnalaQoSConditionVmSourceIpMask	read-create	current	Source IP mask to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.132	ColumnalaQoSConditionVmSourceIpv6IpAddr	read-create	current	Destination IP address to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.133	ColumnalaQoSConditionVmSourceIpv6IpAddrStatus	read-create	current	Status field indicating whether the source IP address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.134	ColumnalaQoSConditionVmSourceIpv6IpMask	read-create	current	Source IP mask to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.135	ColumnalaQoSConditionVmIpProtocol	read-create	current	IP protocol to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.136	ColumnalaQoSConditionVmIpProtocolStatus	read-create	current	Status field indicating whether the IP protocol needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.137	ColumnalaQosConditionVmL4SourcePort	read-create	current	Source IP port to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.138	ColumnalaQosConditionVmL4SourcePortStatus	read-create	current	Status field indicating whether the source IP port needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.139	ColumnalaQosConditionVmL4DestPort	read-create	current	Destination IP port to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.140	ColumnalaQosConditionVmL4DestPortStatus	read-create	current	Status field indicating whether the destination port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.141	ColumnalaQosConditionVxlanStatus	read-create	current	Status field indicating vxlan configuration.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.142	ColumnalaQoSConditionSourcePortSplitGroup	read-create	current	Source physical port split-group to be used for traffic classification. Meter action should be applied on per-port basis.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.3.1.143	ColumnalaQoSConditionSourcePortSplitGroupStatus	read-create	current	Status field indicating whether the source physical port splitGroup needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4	TablealaQoSAppliedConditionTable	not-accessible	current	Table of QoS AppliedCondition definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1	RowalaQoSAppliedConditionEntry	not-accessible	current	Definition of QoS AppliedCondition
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.1	ColumnalaQoSAppliedConditionName	not-accessible	current	Name of condition
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.2	ColumnalaQoSAppliedConditionSource	read-only	current	What entity created the condition.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.3	ColumnalaQoSAppliedConditionSourceSlot	read-only	current	Source physical slot used for traffic classification When 0, the port identifies an aggregate
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.4	ColumnalaQoSAppliedConditionSourceSlotStatus	read-only	current	Status field indicating whether the source physical slot and port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.5	ColumnalaQoSAppliedConditionSourcePort	read-only	current	Source physical port range start to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.6	ColumnalaQoSAppliedConditionSourcePortGroup	read-only	current	Source physical port group to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.7	ColumnalaQoSAppliedConditionSourcePortGroupStatus	read-only	current	Status field indicating whether the source physical port group needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.8	ColumnalaQoSAppliedConditionDestinationSlot	read-only	current	Destination physical slot used for traffic classification When 0, the port identifies an aggregate
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.9	ColumnalaQoSAppliedConditionDestinationSlotStatus	read-only	current	Status field indicating whether the destination physical slot and port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.10	ColumnalaQoSAppliedConditionDestinationPort	read-only	current	Destination physical port range start to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.11	ColumnalaQoSAppliedConditionDestinationPortGroup	read-only	current	Destination physical port group to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.12	ColumnalaQoSAppliedConditionDestinationPortGroupStatus	read-only	current	Status field indicating whether the destination physical port group needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.13	ColumnalaQoSAppliedConditionSourceMacAddr	read-only	current	Source MAC address to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.14	ColumnalaQoSAppliedConditionSourceMacAddrStatus	read-only	current	Status field indicating whether the source MAC address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.15	ColumnalaQoSAppliedConditionSourceMacMask	read-only	current	Source MAC mask to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.16	ColumnalaQoSAppliedConditionSourceMacGroup	read-only	current	Source MAC group to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.17	ColumnalaQoSAppliedConditionSourceMacGroupStatus	read-only	current	Status field indicating whether the source MAC group needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.18	ColumnalaQoSAppliedConditionDestinationMacAddr	read-only	current	Destination MAC address to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.19	ColumnalaQoSAppliedConditionDestinationMacAddrStatus	read-only	current	Status field indicating whether the destination MAC address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.20	ColumnalaQoSAppliedConditionDestinationMacMask	read-only	current	Destination MAC mask to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.21	ColumnalaQoSAppliedConditionDestinationMacGroup	read-only	current	Destination MAC group to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.22	ColumnalaQoSAppliedConditionDestinationMacGroupStatus	read-only	current	Status field indicating whether the destination MAC group needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.23	ColumnalaQoSAppliedConditionSourceVlan	read-only	current	Source VLAN to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.24	ColumnalaQoSAppliedConditionSourceVlanStatus	read-only	current	Status field indicating whether the source VLAN needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.25	ColumnalaQoSAppliedConditionDestinationVlan	read-only	current	Destination VLAN to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.26	ColumnalaQoSAppliedConditionDestinationVlanStatus	read-only	current	Status field indicating whether the destination VLAN needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.27	ColumnalaQoSAppliedCondition8021p	read-only	current	802.1p value to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.28	ColumnalaQoSAppliedCondition8021pStatus	read-only	current	Status field indicating whether the 802.1p value needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.29	ColumnalaQoSAppliedConditionSourceIpAddr	read-only	current	Source IP address to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.30	ColumnalaQoSAppliedConditionSourceIpAddrStatus	read-only	current	Status field indicating whether the source IP address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.31	ColumnalaQoSAppliedConditionSourceIpMask	read-only	current	Source IP mask to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.32	ColumnalaQoSAppliedConditionSourceNetworkGroup	read-only	current	Source network group to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.33	ColumnalaQoSAppliedConditionSourceNetworkGroupStatus	read-only	current	Status field indicating whether the source network group needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.34	ColumnalaQoSAppliedConditionDestinationIpAddr	read-only	current	Destination IP address to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.35	ColumnalaQoSAppliedConditionDestinationIpAddrStatus	read-only	current	Status field indicating whether the destination IP address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.36	ColumnalaQoSAppliedConditionDestinationIpMask	read-only	current	Destination IP mask to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.37	ColumnalaQoSAppliedConditionDestinationNetworkGroup	read-only	current	Destination network group to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.38	ColumnalaQoSAppliedConditionDestinationNetworkGroupStatus	read-only	current	Status field indicating whether the destination network group needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.39	ColumnalaQoSAppliedConditionMulticastIpAddr	read-only	current	Multicast IP address to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.40	ColumnalaQoSAppliedConditionMulticastIpAddrStatus	read-only	current	Status field indicating whether the multicast IP address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.41	ColumnalaQoSAppliedConditionMulticastIpMask	read-only	current	Multicast IP mask to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.42	ColumnalaQoSAppliedConditionMulticastNetworkGroup	read-only	current	Multicast network group to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.43	ColumnalaQoSAppliedConditionMulticastNetworkGroupStatus	read-only	current	Status field indicating whether the multicast network group needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.44	ColumnalaQoSAppliedConditionTos	read-only	current	TOS value to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.45	ColumnalaQoSAppliedConditionTosStatus	read-only	current	Status field indicating whether the TOS value & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.46	ColumnalaQoSAppliedConditionTosMask	read-only	current	TOS mask to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.47	ColumnalaQoSAppliedConditionDscp	read-only	current	DSCP value to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.48	ColumnalaQoSAppliedConditionDscpStatus	read-only	current	Status field indicating whether the DSCP value & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.49	ColumnalaQoSAppliedConditionDscpMask	read-only	current	DSCP mask to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.50	ColumnalaQoSAppliedConditionIpProtocol	read-only	current	IP protocol to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.51	ColumnalaQoSAppliedConditionIpProtocolStatus	read-only	current	Status field indicating whether the IP protocol needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.52	ColumnalaQoSAppliedConditionSourceIpPort	read-only	current	Source IP port range start to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.53	ColumnalaQoSAppliedConditionSourceIpPortStatus	read-only	current	Status field indicating whether the source IP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.54	ColumnalaQoSAppliedConditionDestinationIpPort	read-only	current	Destination IP port range start to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.55	ColumnalaQoSAppliedConditionDestinationIpPortStatus	read-only	current	Status field indicating whether the destination IP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.56	ColumnalaQoSAppliedConditionService	read-only	current	Name of service to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.57	ColumnalaQoSAppliedConditionServiceStatus	read-only	current	Status field indicating whether the service needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.58	ColumnalaQoSAppliedConditionServiceGroup	read-only	current	Name of service group to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.59	ColumnalaQoSAppliedConditionServiceGroupStatus	read-only	current	Status field indicating whether the service group needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.60	ColumnalaQoSAppliedConditionIcmpType	read-only	current	ICMP type to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.61	ColumnalaQoSAppliedConditionIcmpTypeStatus	read-only	current	Status field indicating whether the ICMP type needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.62	ColumnalaQoSAppliedConditionIcmpCode	read-only	current	ICMP code to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.63	ColumnalaQoSAppliedConditionIcmpCodeStatus	read-only	current	Status field indicating whether the ICMP code needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.64	ColumnalaQoSAppliedConditionRowStatus	read-only	current	Used to create/delete conditions according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.65	ColumnalaQoSAppliedConditionSourcePortEnd	read-only	current	Source physical port range end to use for traffic classification. Must be greater than port range start to indicate a range. When '1', use source port as a sin…
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.66	ColumnalaQoSAppliedConditionDestinationPortEnd	read-only	current	Destination physical port range end to use for traffic classification. Must be greater than port range start to indicate a range. When '1', use destination por…
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.67	ColumnalaQoSAppliedConditionSourceIpPortEnd	read-only	current	Source IP port range end to use for traffic classification. Must be greater than source IP port range start to indicate a range. When '0', use source IP port a…
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.68	ColumnalaQoSAppliedConditionDestinationIpPortEnd	read-only	current	Destination IP port range end to use for traffic classification. Must be greater than destination IP port range start to indicate a range. When '0', use destin…
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.69	ColumnalaQoSAppliedConditionSourceTcpPort	read-only	current	Source TCP port range start to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.70	ColumnalaQoSAppliedConditionSourceTcpPortStatus	read-only	current	Status field indicating whether the source TCP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.71	ColumnalaQoSAppliedConditionSourceTcpPortEnd	read-only	current	Source TCP port range end to use for traffic classification. Must be greater than source TCP port range start to indicate a range. When '0', use source TCP por…
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.72	ColumnalaQoSAppliedConditionDestinationTcpPort	read-only	current	Destination TCP port range start to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.73	ColumnalaQoSAppliedConditionDestinationTcpPortStatus	read-only	current	Status field indicating whether the destination TCP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.74	ColumnalaQoSAppliedConditionDestinationTcpPortEnd	read-only	current	Destination TCP port range end to use for traffic classification. Must be greater than destination TCP port range start to indicate a range. When '0', use dest…
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.75	ColumnalaQoSAppliedConditionSourceUdpPort	read-only	current	Source UDP port range start to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.76	ColumnalaQoSAppliedConditionSourceUdpPortStatus	read-only	current	Status field indicating whether the source UDP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.77	ColumnalaQoSAppliedConditionSourceUdpPortEnd	read-only	current	Source UDP port range end to use for traffic classification. Must be greater than source UDP port range start to indicate a range. When '0', use source UDP por…
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.78	ColumnalaQoSAppliedConditionDestinationUdpPort	read-only	current	Destination UDP port range start to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.79	ColumnalaQoSAppliedConditionDestinationUdpPortStatus	read-only	current	Status field indicating whether the destination UDP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.80	ColumnalaQoSAppliedConditionDestinationUdpPortEnd	read-only	current	Destination UDP port range end to use for traffic classification. Must be greater than destination UDP port range start to indicate a range. When '0', use dest…
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.81	ColumnalaQoSAppliedConditionEthertype	read-only	current	Ethertype value to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.82	ColumnalaQoSAppliedConditionEthertypeStatus	read-only	current	Status field indicating whether the ethertype value needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.83	ColumnalaQoSAppliedConditionTcpFlags	read-only	current	Use any/all specifieid TCP flags for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.84	ColumnalaQoSAppliedConditionTcpFlagsStatus	read-only	current	Status field indicating whether the TCP flag bits needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.85	ColumnalaQoSAppliedConditionTcpFlagsVal	read-only	current	TCP flags values used for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.86	ColumnalaQoSAppliedConditionTcpFlagsValStatus	read-only	current	Not used
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.87	ColumnalaQoSAppliedConditionTcpFlagsMask	read-only	current	Mask of TCP flags bits used for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.88	ColumnalaQoSAppliedConditionTcpFlagsMaskStatus	read-only	current	Not used
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.89	ColumnalaQoSAppliedConditionTcpEstablished	read-only	current	Look for established TCP sessions in classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.90	ColumnalaQoSAppliedConditionSourceIpv6Addr	read-only	current	Source IPv6 address to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.91	ColumnalaQoSAppliedConditionSourceIpv6AddrStatus	read-only	current	Status field indicating whether the source IPv6 address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.92	ColumnalaQoSAppliedConditionSourceIpv6Mask	read-only	current	Source IPv6 mask to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.93	ColumnalaQoSAppliedConditionDestinationIpv6Addr	read-only	current	Destination IPv6 address to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.94	ColumnalaQoSAppliedConditionDestinationIpv6AddrStatus	read-only	current	Status field indicating whether the destination IPv6 address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.95	ColumnalaQoSAppliedConditionDestinationIpv6Mask	read-only	current	Destination IPv6 mask to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.96	ColumnalaQoSAppliedConditionIpv6Traffic	read-only	current	classify IPV6 traffic
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.97	ColumnalaQoSAppliedConditionIpv6NH	read-only	current	NH value to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.98	ColumnalaQoSAppliedConditionIpv6NHStatus	read-only	current	Status field indicating whether the NH value needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.99	ColumnalaQoSAppliedConditionIpv6FlowLabel	read-only	current	FL value to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.100	ColumnalaQoSAppliedConditionIpv6FlowLabelStatus	read-only	current	Status field indicating whether the flow label value needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.101	ColumnalaQoSAppliedConditionMcastIpv6Addr	read-create	current	Multicast IPv6 address to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.102	ColumnalaQoSAppliedConditionMcastIpv6AddrStatus	read-create	current	Status field indicating whether the multicast IPv6 address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.103	ColumnalaQoSAppliedConditionMcastIpv6Mask	read-create	current	Multicast IPv6 mask to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.104	ColumnalaQoSAppliedConditionDscpEnd	read-only	current	DSCP value to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.105	ColumnalaQoSAppliedConditionInnerSourceVlan	read-only	current	Customer VLAN to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.106	ColumnalaQoSAppliedConditionInnerSourceVlanStatus	read-only	current	Status field indicating whether the inner VLAN needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.107	ColumnalaQoSAppliedConditionInner8021p	read-only	current	Customer 802.1p to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.108	ColumnalaQoSAppliedConditionInner8021pStatus	read-only	current	Status field indicating whether the inner 802.1p needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.109	ColumnalaQoSAppliedConditionVrfName	read-create	current	Name of Vrf to match traffic in
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.110	ColumnalaQoSAppliedConditionVrfNameStatus	read-create	current	Status field indicating whether the traffic from a specific vrf needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.111	ColumnalaQoSAppliedConditionFragments	read-only	current	TCP packet fragments
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.112	ColumnalaQoSAppliedConditionSourceChassis	read-only	current	Source physical chassis used for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.113	ColumnalaQoSAppliedConditionDestinationChassis	read-only	current	Destination physical chassis used for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.114	ColumnalaQoSAppliedConditionAppFpGroup	read-create	current	Application Fingerprinting group.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.115	ColumnalaQoSAppliedConditionAppFpGroupStatus	read-create	current	Status field indicating whether the traffic from a specific Application Fingerprinting Group needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.116	ColumnalaQoSAppliedConditionSIP	read-create	current	SIP type to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.117	ColumnalaQoSAppliedConditionSIPStatus	read-create	current	SIP Status field indicates whether SIP is enabled or disabled for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.118	ColumnalaQoSAppliedConditionDPIAppName	read-create	current	DPI Application Member.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.119	ColumnalaQoSAppliedConditionDPIAppGrp	read-create	current	DPI Application Member Type.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.120	ColumnalaQoSAppliedConditionDPIAppNameStatus	read-create	current	DPI Status field indicates whether DPI Application name is enabled or disabled for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.121	ColumnalaQoSAppliedConditionDPIAppGroupStatus	read-create	current	DPI Status field indicates whether DPI Application group is enabled or disabled for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.122	ColumnalaQoSAppliedConditionVxlanVni	read-create	current	Vni value associated with this vxlan
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.123	ColumnalaQoSAppliedConditionVxlanVniStatus	read-create	current	Status field indicating whether the VNI needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.124	ColumnalaQoSAppliedConditionVxlanPort	read-create	current
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.125	ColumnalaQoSAppliedConditionVxlanPortStatus	read-create	current	Status field indicating whether the VNI needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.126	ColumnalaQoSAppliedConditionVmSourceMacAddr	read-create	current	Source MAC address to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.127	ColumnalaQoSAppliedConditionVmSourceMacAddrStatus	read-create	current	Status field indicating whether the source MAC address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.128	ColumnalaQoSAppliedConditionVmSourceMacMask	read-create	current	Source MAC address to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.129	ColumnalaQoSAppliedConditionVmSourceIpAddr	read-create	current	Source IP address to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.130	ColumnalaQoSAppliedConditionVmSourceIpAddrStatus	read-create	current	Status field indicating whether the source IP address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.131	ColumnalaQoSAppliedConditionVmSourceIpMask	read-create	current	Source IP mask to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.132	ColumnalaQoSAppliedConditionVmSourceIpv6IpAddr	read-create	current	Source IPV6 address to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.133	ColumnalaQoSAppliedConditionVmSourceIpv6IpAddrStatus	read-create	current	Status field indicating whether the source IP address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.134	ColumnalaQoSAppliedConditionVmSourceIpv6IpMask	read-create	current	Source IPV6 mask to use for traffic classification
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.135	ColumnalaQoSAppliedConditionVmIpProtocol	read-create	current	IP protocol to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.136	ColumnalaQoSAppliedConditionVmIpProtocolStatus	read-create	current	Status field indicating whether the IP protocol needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.137	ColumnalaQosAppliedConditionVmL4SourcePort	read-create	current	Source IP port to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.138	ColumnalaQosAppliedConditionVmL4SourcePortStatus	read-create	current	Status field indicating whether the source port needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.139	ColumnalaQosAppliedConditionVmL4DestPort	read-create	current	Destination port to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.140	ColumnalaQosAppliedConditionVmL4DestPortStatus	read-create	current	Status field indicating whether the destination port needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.141	ColumnalaQosAppliedConditionVxlanStatus	read-create	current	Status field indicating vxlan configuration.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.142	ColumnalaQoSAppliedConditionSourcePortSplitGroup	read-only	current	Source physical port split-group to be used for traffic classification. Meter action should be applied on per-port basis.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.4.1.143	ColumnalaQoSAppliedConditionSourcePortSplitGroupStatus	read-only	current	Status field indicating whether the source physical port splitGroup needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5	TablealaQoSServiceTable	not-accessible	current	Table of QoS Service definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1	RowalaQoSServiceEntry	not-accessible	current	Definition of QoS Service
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.1	ColumnalaQoSServiceName	not-accessible	current	Name of the service
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.2	ColumnalaQoSServiceSource	read-create	current	What entity created the service.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.3	ColumnalaQoSServiceProtocol	read-create	current	protocol field for Service
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.4	ColumnalaQoSServiceSourceIpPort	read-create	current	Source IP port range start to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.5	ColumnalaQoSServiceSourceIpPortStatus	read-create	current	Status field indicating whether the source IP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.6	ColumnalaQoSServiceDestinationIpPort	read-create	current	Destination IP port range start to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.7	ColumnalaQoSServiceDestinationIpPortStatus	read-create	current	Status field indicating whether the destination IP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.8	ColumnalaQoSServiceRowStatus	read-create	current	Used to create/delete services according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.9	ColumnalaQoSServiceSourceIpPortEnd	read-create	current	Source IP port range end to use for traffic classification. Must be greater than source IP port range start to indicate a range. When '0', use source IP port a…
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.10	ColumnalaQoSServiceDestinationIpPortEnd	read-create	current	Destination IP port range end to use for traffic classification. Must be greater than destination IP port range start to indicate a range. When '0', use destin…
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.11	ColumnalaQoSServiceSourceTcpPort	read-create	current	Source TCP port range start to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.12	ColumnalaQoSServiceSourceTcpPortStatus	read-create	current	Status field indicating whether the source TCP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.13	ColumnalaQoSServiceSourceTcpPortEnd	read-create	current	Source TCP port range end to use for traffic classification. Must be greater than source TCP port range start to indicate a range. When '0', use source TCP por…
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.14	ColumnalaQoSServiceDestinationTcpPort	read-create	current	Destination TCP port range start to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.15	ColumnalaQoSServiceDestinationTcpPortStatus	read-create	current	Status field indicating whether the destination TCP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.16	ColumnalaQoSServiceDestinationTcpPortEnd	read-create	current	Destination TCP port range end to use for traffic classification. Must be greater than destination TCP port range start to indicate a range. When '0', use dest…
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.17	ColumnalaQoSServiceSourceUdpPort	read-create	current	Source UDP port range start to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.18	ColumnalaQoSServiceSourceUdpPortStatus	read-create	current	Status field indicating whether the source UDP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.19	ColumnalaQoSServiceSourceUdpPortEnd	read-create	current	Source UDP port range end to use for traffic classification. Must be greater than source UDP port range start to indicate a range. When '0', use source UDP por…
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.20	ColumnalaQoSServiceDestinationUdpPort	read-create	current	Destination UDP port range start to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.21	ColumnalaQoSServiceDestinationUdpPortStatus	read-create	current	Status field indicating whether the destination UDP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.5.1.22	ColumnalaQoSServiceDestinationUdpPortEnd	read-create	current	Destination UDP port range end to use for traffic classification. Must be greater than destination UDP port range start to indicate a range. When '0', use dest…
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6	TablealaQoSAppliedServiceTable	not-accessible	current	Table of QoS AppliedService definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1	RowalaQoSAppliedServiceEntry	not-accessible	current	Definition of QoS AppliedService
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.1	ColumnalaQoSAppliedServiceName	not-accessible	current	Name of the service
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.2	ColumnalaQoSAppliedServiceSource	read-only	current	What entity created the service.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.3	ColumnalaQoSAppliedServiceProtocol	read-only	current	protocol field for AppliedService
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.4	ColumnalaQoSAppliedServiceSourceIpPort	read-only	current	Source IP port range start to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.5	ColumnalaQoSAppliedServiceSourceIpPortStatus	read-only	current	Status field indicating whether the source IP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.6	ColumnalaQoSAppliedServiceDestinationIpPort	read-only	current	Destination IP port range start to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.7	ColumnalaQoSAppliedServiceDestinationIpPortStatus	read-only	current	Status field indicating whether the destination IP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.8	ColumnalaQoSAppliedServiceRowStatus	read-only	current	Used to create/delete services according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.9	ColumnalaQoSAppliedServiceSourceIpPortEnd	read-only	current	Source IP port range end to use for traffic classification. Must be greater than source IP port range start to indicate a range. When '0', use source IP port a…
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.10	ColumnalaQoSAppliedServiceDestinationIpPortEnd	read-only	current	Destination IP port range end to use for traffic classification. Must be greater than destination IP port range start to indicate a range. When '0', use destin…
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.11	ColumnalaQoSAppliedServiceSourceTcpPort	read-only	current	Source TCP port range start to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.12	ColumnalaQoSAppliedServiceSourceTcpPortStatus	read-only	current	Status field indicating whether the source TCP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.13	ColumnalaQoSAppliedServiceSourceTcpPortEnd	read-only	current	Source TCP port range end to use for traffic classification. Must be greater than source TCP port range start to indicate a range. When '0', use source TCP por…
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.14	ColumnalaQoSAppliedServiceDestinationTcpPort	read-only	current	Destination TCP port range start to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.15	ColumnalaQoSAppliedServiceDestinationTcpPortStatus	read-only	current	Status field indicating whether the destination TCP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.16	ColumnalaQoSAppliedServiceDestinationTcpPortEnd	read-only	current	Destination TCP port range end to use for traffic classification. Must be greater than destination TCP port range start to indicate a range. When '0', use dest…
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.17	ColumnalaQoSAppliedServiceSourceUdpPort	read-only	current	Source UDP port range start to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.18	ColumnalaQoSAppliedServiceSourceUdpPortStatus	read-only	current	Status field indicating whether the source UDP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.19	ColumnalaQoSAppliedServiceSourceUdpPortEnd	read-only	current	Source UDP port range end to use for traffic classification. Must be greater than source UDP port range start to indicate a range. When '0', use source UDP por…
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.20	ColumnalaQoSAppliedServiceDestinationUdpPort	read-only	current	Destination UDP port range start to use for traffic classification.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.21	ColumnalaQoSAppliedServiceDestinationUdpPortStatus	read-only	current	Status field indicating whether the destination UDP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.6.1.22	ColumnalaQoSAppliedServiceDestinationUdpPortEnd	read-only	current	Destination UDP port range end to use for traffic classification. Must be greater than destination UDP port range start to indicate a range. When '0', use dest…
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.7	TablealaQoSServiceGroupsTable	not-accessible	current	Table of QoS ServiceGroups definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.7.1	RowalaQoSServiceGroupsEntry	not-accessible	current	Definition of QoS ServiceGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.7.1.1	ColumnalaQoSServiceGroupsName	not-accessible	current	Name of service group
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.7.1.2	ColumnalaQoSServiceGroupsSource	read-create	current	What entity created the service group.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.7.1.3	ColumnalaQoSServiceGroupsStatus	read-create	current	Used to create/delete service groups according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.8	TablealaQoSAppliedServiceGroupsTable	not-accessible	current	Table of QoS AppliedServiceGroups definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.8.1	RowalaQoSAppliedServiceGroupsEntry	not-accessible	current	Definition of QoS AppliedServiceGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.8.1.1	ColumnalaQoSAppliedServiceGroupsName	not-accessible	current	Name of service group
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.8.1.2	ColumnalaQoSAppliedServiceGroupsSource	read-only	current	What entity created the service group.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.8.1.3	ColumnalaQoSAppliedServiceGroupsStatus	read-only	current	Used to create/delete service groups according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.9	TablealaQoSServiceGroupTable	not-accessible	current	Table of QoS ServiceGroup definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.9.1	RowalaQoSServiceGroupEntry	not-accessible	current	Definition of QoS ServiceGroup
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.9.1.1	ColumnalaQoSServiceGroupServiceName	not-accessible	current	Name of service in service group entry
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.9.1.2	ColumnalaQoSServiceGroupStatus	read-create	current	Used to create/delete service group entries according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.10	TablealaQoSAppliedServiceGroupTable	not-accessible	current	Table of QoS AppliedServiceGroup definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.10.1	RowalaQoSAppliedServiceGroupEntry	not-accessible	current	Definition of QoS AppliedServiceGroup
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.10.1.1	ColumnalaQoSAppliedServiceGroupServiceName	not-accessible	current	Name of service in service group entry
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.10.1.2	ColumnalaQoSAppliedServiceGroupStatus	read-only	current	Used to create/delete service group entries according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.11	TablealaQoSNetworkGroupsTable	not-accessible	current	Table of QoS NetworkGroups definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.11.1	RowalaQoSNetworkGroupsEntry	not-accessible	current	Definition of QoS NetworkGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.11.1.1	ColumnalaQoSNetworkGroupsName	not-accessible	current	Name of network group
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.11.1.2	ColumnalaQoSNetworkGroupsSource	read-create	current	What entity created the network group.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.11.1.3	ColumnalaQoSNetworkGroupsStatus	read-create	current	Used to create/delete network groups according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.12	TablealaQoSAppliedNetworkGroupsTable	not-accessible	current	Table of QoS AppliedNetworkGroups definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.12.1	RowalaQoSAppliedNetworkGroupsEntry	not-accessible	current	Definition of QoS AppliedNetworkGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.12.1.1	ColumnalaQoSAppliedNetworkGroupsName	not-accessible	current	Name of network group
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.12.1.2	ColumnalaQoSAppliedNetworkGroupsSource	read-only	current	What entity created the network group.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.12.1.3	ColumnalaQoSAppliedNetworkGroupsStatus	read-only	current	Used to create/delete network groups according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.13	TablealaQoSNetworkGroupTable	not-accessible	current	Table of QoS NetworkGroup definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.13.1	RowalaQoSNetworkGroupEntry	not-accessible	current	Definition of QoS NetworkGroup
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.13.1.1	ColumnalaQoSNetworkGroupIpAddr	not-accessible	current	IP address for network group entry.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.13.1.2	ColumnalaQoSNetworkGroupIpMask	not-accessible	current	IP mask for network group entry.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.13.1.3	ColumnalaQoSNetworkGroupStatus	read-create	current	Used to create/delete network group entries according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.14	TablealaQoSAppliedNetworkGroupTable	not-accessible	current	Table of QoS AppliedNetworkGroup definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.14.1	RowalaQoSAppliedNetworkGroupEntry	not-accessible	current	Definition of QoS AppliedNetworkGroup
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.14.1.1	ColumnalaQoSAppliedNetworkGroupIpAddr	not-accessible	current	IP address for network group entry.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.14.1.2	ColumnalaQoSAppliedNetworkGroupIpMask	not-accessible	current	IP mask for network group entry.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.14.1.3	ColumnalaQoSAppliedNetworkGroupStatus	read-only	current	Used to create/delete network group entries according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.15	TablealaQoSMACGroupsTable	not-accessible	current	Table of QoS MACGroups definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.15.1	RowalaQoSMACGroupsEntry	not-accessible	current	Definition of QoS MACGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.15.1.1	ColumnalaQoSMACGroupsName	not-accessible	current	Name of MAC group
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.15.1.2	ColumnalaQoSMACGroupsSource	read-create	current	What entity created the MAC group.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.15.1.3	ColumnalaQoSMACGroupsStatus	read-create	current	Used to create/delete MAC groups according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.16	TablealaQoSAppliedMACGroupsTable	not-accessible	current	Table of QoS AppliedMACGroups definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.16.1	RowalaQoSAppliedMACGroupsEntry	not-accessible	current	Definition of QoS AppliedMACGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.16.1.1	ColumnalaQoSAppliedMACGroupsName	not-accessible	current	Name of MAC group
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.16.1.2	ColumnalaQoSAppliedMACGroupsSource	read-only	current	What entity created the MAC group.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.16.1.3	ColumnalaQoSAppliedMACGroupsStatus	read-only	current	Used to create/delete MAC groups according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.17	TablealaQoSMACGroupTable	not-accessible	current	Table of QoS MACGroup definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.17.1	RowalaQoSMACGroupEntry	not-accessible	current	Definition of QoS MACGroup
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.17.1.1	ColumnalaQoSMACGroupMacAddr	not-accessible	current	MAC address for MAC group entry
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.17.1.2	ColumnalaQoSMACGroupMacMask	not-accessible	current	MAC mask for MAC group entry
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.17.1.3	ColumnalaQoSMACGroupStatus	read-create	current	Used to create/delete MAC group entries according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.18	TablealaQoSAppliedMACGroupTable	not-accessible	current	Table of QoS AppliedMACGroup definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.18.1	RowalaQoSAppliedMACGroupEntry	not-accessible	current	Definition of QoS AppliedMACGroup
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.18.1.1	ColumnalaQoSAppliedMACGroupMacAddr	not-accessible	current	MAC address for MAC group entry
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.18.1.2	ColumnalaQoSAppliedMACGroupMacMask	not-accessible	current	MAC mask for MAC group entry
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.18.1.3	ColumnalaQoSAppliedMACGroupStatus	read-only	current	Used to create/delete MAC group entries according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.19	TablealaQoSPortGroupsTable	not-accessible	current	Table of QoS PortGroups definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.19.1	RowalaQoSPortGroupsEntry	not-accessible	current	Definition of QoS PortGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.19.1.1	ColumnalaQoSPortGroupsName	not-accessible	current	Name of port group
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.19.1.2	ColumnalaQoSPortGroupsSource	read-create	current	What entity created the port group.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.19.1.3	ColumnalaQoSPortGroupsStatus	read-create	current	Used to create/delete port groups according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.20	TablealaQoSAppliedPortGroupsTable	not-accessible	current	Table of QoS AppliedPortGroups definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.20.1	RowalaQoSAppliedPortGroupsEntry	not-accessible	current	Definition of QoS AppliedPortGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.20.1.1	ColumnalaQoSAppliedPortGroupsName	not-accessible	current	Name of port group
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.20.1.2	ColumnalaQoSAppliedPortGroupsSource	read-only	current	What entity created the port group.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.20.1.3	ColumnalaQoSAppliedPortGroupsStatus	read-only	current	Used to create/delete port groups according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.21	TablealaQoSPortGroupTable	not-accessible	current	Table of QoS PortGroup definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.21.1	RowalaQoSPortGroupEntry	not-accessible	current	Definition of QoS PortGroup
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.21.1.1	ColumnalaQoSPortGroupSlot	not-accessible	current	Physical slot for port group entry. If this is a virtual chassis environemnt, This will contain the ChassisId*1000 + slotNum.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.21.1.2	ColumnalaQoSPortGroupPort	not-accessible	current	Physical port range start for port group entry
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.21.1.3	ColumnalaQoSPortGroupStatus	read-create	current	Used to create/delete port group entries according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.21.1.4	ColumnalaQoSPortGroupPortEnd	not-accessible	current	Physical port range end for port group entry Must be greater than port range start to indicate a range. When '1', use port as a single port.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.22	TablealaQoSAppliedPortGroupTable	not-accessible	current	Table of QoS AppliedPortGroup definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.22.1	RowalaQoSAppliedPortGroupEntry	not-accessible	current	Definition of QoS AppliedPortGroup
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.22.1.1	ColumnalaQoSAppliedPortGroupSlot	not-accessible	current	Physical slot for port group entry If this is a virtual chassis environemnt, This will contain the ChassisId*1000 + slotNum.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.22.1.2	ColumnalaQoSAppliedPortGroupPort	not-accessible	current	Physical port range start for port group entry
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.22.1.3	ColumnalaQoSAppliedPortGroupStatus	read-only	current	Used to create/delete port group entries according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.22.1.4	ColumnalaQoSAppliedPortGroupPortEnd	not-accessible	current	Physical port range end for port group entry Must be greater than port range start to indicate a range. When '1', use port as a single port.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.23	TablealaQoSMapGroupsTable	not-accessible	current	Table of QoS MapGroups definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.23.1	RowalaQoSMapGroupsEntry	not-accessible	current	Definition of QoS MapGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.23.1.1	ColumnalaQoSMapGroupsName	not-accessible	current	Name of map group
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.23.1.2	ColumnalaQoSMapGroupsSource	read-create	current	What entity created the map group.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.23.1.3	ColumnalaQoSMapGroupsStatus	read-create	current	Used to create/delete map groups according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.24	TablealaQoSAppliedMapGroupsTable	not-accessible	current	Table of QoS AppliedMapGroups definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.24.1	RowalaQoSAppliedMapGroupsEntry	not-accessible	current	Definition of QoS AppliedMapGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.24.1.1	ColumnalaQoSAppliedMapGroupsName	not-accessible	current	Name of map group
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.24.1.2	ColumnalaQoSAppliedMapGroupsSource	read-only	current	What entity created the map group.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.24.1.3	ColumnalaQoSAppliedMapGroupsStatus	read-only	current	Used to create/delete map groups according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.25	TablealaQoSMapGroupTable	not-accessible	current	Table of QoS MapGroup definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.25.1	RowalaQoSMapGroupEntry	not-accessible	current	Definition of QoS MapGroup
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.25.1.1	ColumnalaQoSMapGroupKey	not-accessible	current	Key range start of map group entry.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.25.1.2	ColumnalaQoSMapGroupKeyEnd	not-accessible	current	Key range end for map group entries. Key range end must be greater than key range start to indicate a range. When '0', use key range start as a single key.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.25.1.3	ColumnalaQoSMapGroupValue	not-accessible	current	Value for map group entries. Value to stamp on traffic when keys in the proper range are seen.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.25.1.4	ColumnalaQoSMapGroupStatus	read-create	current	Used to create/delete map group entries according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.26	TablealaQoSAppliedMapGroupTable	not-accessible	current	Table of QoS AppliedMapGroup definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.26.1	RowalaQoSAppliedMapGroupEntry	not-accessible	current	Definition of QoS AppliedMapGroup
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.26.1.1	ColumnalaQoSAppliedMapGroupKey	not-accessible	current	Key range start of map group entry.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.26.1.2	ColumnalaQoSAppliedMapGroupKeyEnd	not-accessible	current	Key range end for map group entries. Key range end must be greater than key range start to indicate a range. When '0', use key range start as a single key.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.26.1.3	ColumnalaQoSAppliedMapGroupValue	not-accessible	current	Value for map group entries. Value to stamp on traffic when keys in the proper range are seen.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.26.1.4	ColumnalaQoSAppliedMapGroupStatus	read-only	current	Used to create/delete map group entries according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27	TablealaQoSActionTable	not-accessible	current	Table of QoS Action definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1	RowalaQoSActionEntry	not-accessible	current	Definition of QoS Action
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.1	ColumnalaQoSActionName	not-accessible	current	Name of action
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.2	ColumnalaQoSActionSource	read-create	current	What entity created the action.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.3	ColumnalaQoSActionDisposition	read-create	current	Disposition of traffic using the action. Use to filter out unwanted traffic.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.4	ColumnalaQoSActionMaximumBandwidth	read-create	current	Maximum bandwidth (Kbits/sec) allowed for traffic
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.5	ColumnalaQoSActionMaximumBandwidthStatus	read-create	current	Status field indicating whether maximum bandwidth is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.6	ColumnalaQoSActionPriority	read-create	current	Internal and queueing priority to use for traffic.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.7	ColumnalaQoSActionPriorityStatus	read-create	current	Status field indicating whether priority is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.8	ColumnalaQoSActionShared	read-create	current	When enabled, try and share any resources (queues/limiters/descriptors) when more than one policy uses the same action.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.9	ColumnalaQoSActionMaximumDepth	read-create	current	Maximum depth (Kbytes) of queues for traffic. Used for EBS in tri-color marker applications.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.10	ColumnalaQoSActionMaximumDepthStatus	read-create	current	Status field indicating whether maximum depth is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.11	ColumnalaQoSAction8021p	read-create	current	802.1p value to stamp on traffic.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.12	ColumnalaQoSAction8021pStatus	read-create	current	Status field indicating whether 802.1p is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.13	ColumnalaQoSActionTos	read-create	current	TOS value to stamp on traffic. (High 3 bits of TOS byte)
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.14	ColumnalaQoSActionTosStatus	read-create	current	Status field indicating whether TOS is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.15	ColumnalaQoSActionDscp	read-create	current	TOS value to stamp on traffic. (High 6 bits of TOS byte)
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.16	ColumnalaQoSActionDscpStatus	read-create	current	Status field indicating whether DSCP is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.17	ColumnalaQoSActionMapFrom	read-create	current	What field to use as key for mapping 802.1p/TOS/DSCP priorities
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.18	ColumnalaQoSActionMapTo	read-create	current	What field to rewrite due to remapping 802.1p/TOS/DSCP priorities
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.19	ColumnalaQoSActionMapGroup	read-create	current	Name of the map group to use when remapping 802.1p/TOS/DSCP priorities.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.20	ColumnalaQoSActionMapGroupStatus	read-create	current	Status field indicating whether a map group is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.21	ColumnalaQoSActionLoadBalanceGroup	read-create	current	Name of load balance group to use for traffic
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.22	ColumnalaQoSActionLoadBalanceGroupStatus	read-create	current	Status field indicating whether load balanace group is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.23	ColumnalaQoSActionPermanentGatewayIpAddr	read-create	current	Next hop gateway to use for traffic
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.24	ColumnalaQoSActionPermanentGatewayIpAddrStatus	read-create	current	Status field indicating whether permanent gateway IP address is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.25	ColumnalaQoSActionAlternateGatewayIpAddr	read-create	current	Next hop gateway to use for traffic that doesn't have an explicit route. Use this gateway instead of default routes.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.26	ColumnalaQoSActionAlternateGatewayIpAddrStatus	read-create	current	Status field indicating whether alternate gateway IP address is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.27	ColumnalaQoSActionRowStatus	read-create	current	Used to create/delete actions according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.28	ColumnalaQoSActionNocache	read-create	current	When enabled, don't make hardware entries for matching flows.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.29	ColumnalaQoSActionPortdisable	read-create	current	When enabled, disable the physical source port of the traffic.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.30	ColumnalaQoSActionRedirectSlot	read-create	current	Destination physical slot for redirected traffic
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.31	ColumnalaQoSActionRedirectSlotStatus	read-create	current	Status for alaQoSActionRedirectSlotStatus field
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.32	ColumnalaQoSActionRedirectPort	read-create	current	Destination physical port for redirected traffic
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.33	ColumnalaQoSActionRedirectAgg	read-create	current	Destination linkagg for redirected traffic
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.34	ColumnalaQoSActionRedirectAggStatus	read-create	current	Status for alaQoSActionRedirectAggStatus field
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.35	ColumnalaQoSActionMirrorSlot	read-create	current	Destination physical slot for mirrored traffic
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.36	ColumnalaQoSActionMirrorPort	read-create	current	Destination physical port for mirrored traffic
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.37	ColumnalaQoSActionMirrorMode	read-create	current	Mirroring mode
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.38	ColumnalaQoSActionMirrorModeStatus	read-create	current	Status for alaQoSActionMirrorMode field
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.39	ColumnalaQoSActionCIR	read-create	current	Committed Information Rate - bandwidth values in kilobits per second.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.40	ColumnalaQoSActionCIRStatus	read-create	current	Status field indicating whether CIR value is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.41	ColumnalaQoSActionCBS	read-create	current	Committed Burst Size - bucket size in byte.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.42	ColumnalaQoSActionCBSStatus	read-create	current	Status field indicating whether CBS value is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.43	ColumnalaQoSActionPIR	read-create	current	Peak Information Rate - bandwidth values in kilobits per second.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.44	ColumnalaQoSActionPIRStatus	read-create	current	Status field indicating whether PIR value is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.45	ColumnalaQoSActionPBS	read-create	current	Peak Burst Size - bucket size in byte.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.46	ColumnalaQoSActionPBSStatus	read-create	current	Status field indicating whether PBS value is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.47	ColumnalaQoSActionCPUPriority	read-create	current	Priority for CPU messages.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.48	ColumnalaQoSActionCPUPriorityStatus	read-create	current	Status field indicating whether CPU Priority value is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.49	ColumnalaQoSActionColorOnly	read-create	current	only color red traffic
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.50	ColumnalaQoSActionRedirectChassis	read-create	current	Destination physical chassis for redirected traffic
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.51	ColumnalaQoSActionMirrorChassis	read-create	current	Destination physical chassis for mirrored traffic
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.52	ColumnalaQoSActionPermanentGatewayIpV6Addr	read-create	current	Next hop gateway to use for IPv6 traffic
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.53	ColumnalaQoSActionPermanentGatewayIpV6AddrStatus	read-create	current	Status field indicating whether permanent gateway IPv6 address is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.54	ColumnalaQoSActionPermanentGatewayIpV6IfIndex	read-create	current	Ipv6IfIndex for link-local address, else 0.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.55	ColumnalaQoSActionRTCPMonitor	read-create	current	RTCP Monitor status for the traffic.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.56	ColumnalaQoSActionRTCPMonitorStatus	read-create	current	Status of the RTCP Monitor field for the traffic.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.57	ColumnalaQoSActionRTCPDSCP	read-create	current	RTCP DSCP number for the traffic.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.58	ColumnalaQoSActionRTCPDSCPStatus	read-create	current	Status of the RTCP DSCP field for the traffic.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.59	ColumnalaQoSActionTrustDSCP	read-create	current	Trust DSCP status for the traffic.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.60	ColumnalaQoSActionTrustDSCPStatus	read-create	current	Status of the Trust DSCP field for the traffic.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.27.1.61	ColumnalaQoSActionRedirectModule	read-create	current	Object to configure action on HTTP port for Access-Guardian Restricted Role configuration.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28	TablealaQoSAppliedActionTable	not-accessible	current	Table of QoS AppliedAction definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1	RowalaQoSAppliedActionEntry	not-accessible	current	Definition of QoS AppliedAction
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.1	ColumnalaQoSAppliedActionName	not-accessible	current	Name of action
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.2	ColumnalaQoSAppliedActionSource	read-only	current	What entity created the action.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.3	ColumnalaQoSAppliedActionDisposition	read-only	current	Disposition of traffic using the action. Use to filter out unwanted traffic.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.4	ColumnalaQoSAppliedActionMaximumBandwidth	read-only	current	Maximum bandwidth (Kbits/sec) allowed for traffic
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.5	ColumnalaQoSAppliedActionMaximumBandwidthStatus	read-only	current	Status field indicating whether maximum bandwidth is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.6	ColumnalaQoSAppliedActionPriority	read-only	current	Internal and queueing priority to use for traffic.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.7	ColumnalaQoSAppliedActionPriorityStatus	read-only	current	Status field indicating whether priority is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.8	ColumnalaQoSAppliedActionShared	read-only	current	When enabled, try and share any resources (queues/limiters/descriptors) when more than one policy uses the same action.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.9	ColumnalaQoSAppliedActionMaximumDepth	read-only	current	Maximum depth (Kbytes) of queues for traffic. Used for EBS in tri-color marker applications.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.10	ColumnalaQoSAppliedActionMaximumDepthStatus	read-only	current	Status field indicating whether maximum depth is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.11	ColumnalaQoSAppliedAction8021p	read-only	current	802.1p value to stamp on traffic.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.12	ColumnalaQoSAppliedAction8021pStatus	read-only	current	Status field indicating whether 802.1p is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.13	ColumnalaQoSAppliedActionTos	read-only	current	TOS value to stamp on traffic. (High 3 bits of TOS byte)
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.14	ColumnalaQoSAppliedActionTosStatus	read-only	current	Status field indicating whether TOS is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.15	ColumnalaQoSAppliedActionDscp	read-only	current	TOS value to stamp on traffic. (High 6 bits of TOS byte)
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.16	ColumnalaQoSAppliedActionDscpStatus	read-only	current	Status field indicating whether DSCP is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.17	ColumnalaQoSAppliedActionMapFrom	read-only	current	What field to use as key for mapping 802.1p/TOS/DSCP priorities
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.18	ColumnalaQoSAppliedActionMapTo	read-only	current	What field to rewrite due to remapping 802.1p/TOS/DSCP priorities
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.19	ColumnalaQoSAppliedActionMapGroup	read-only	current	Name of the map group to use when remapping 802.1p/TOS/DSCP priorities.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.20	ColumnalaQoSAppliedActionMapGroupStatus	read-only	current	Status field indicating whether a map group is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.21	ColumnalaQoSAppliedActionLoadBalanceGroup	read-only	current	Name of load balance group to use for traffic
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.22	ColumnalaQoSAppliedActionLoadBalanceGroupStatus	read-only	current	Status field indicating whether load balanace group is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.23	ColumnalaQoSAppliedActionPermanentGatewayIpAddr	read-only	current	Next hop gateway to use for traffic
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.24	ColumnalaQoSAppliedActionPermanentGatewayIpAddrStatus	read-only	current	Status field indicating whether permanent gateway IP address is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.25	ColumnalaQoSAppliedActionAlternateGatewayIpAddr	read-only	current	Next hop gateway to use for traffic that doesn't have an explicit route. Use this gateway instead of default routes.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.26	ColumnalaQoSAppliedActionAlternateGatewayIpAddrStatus	read-only	current	Status field indicating whether alternate gateway IP address is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.27	ColumnalaQoSAppliedActionRowStatus	read-only	current	Used to create/delete actions according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.28	ColumnalaQoSAppliedActionNocache	read-only	current	When enabled, don't make hardware entries for matching flows.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.29	ColumnalaQoSAppliedActionPortdisable	read-only	current	When enabled, disable the physical source port of the traffic.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.30	ColumnalaQoSAppliedActionRedirectSlot	read-only	current	Destination physical slot for redirected traffic
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.31	ColumnalaQoSAppliedActionRedirectSlotStatus	read-only	current	Status for alaQoSAppliedActionRedirectSlotStatus field
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.32	ColumnalaQoSAppliedActionRedirectPort	read-only	current	Destination physical port for redirected traffic
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.33	ColumnalaQoSAppliedActionRedirectAgg	read-only	current	Destination linkagg for redirected traffic
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.34	ColumnalaQoSAppliedActionRedirectAggStatus	read-only	current	Status for alaQoSAppliedActionRedirectAggStatus field
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.35	ColumnalaQoSAppliedActionMirrorSlot	read-only	current	Destination physical slot for mirrored traffic
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.36	ColumnalaQoSAppliedActionMirrorPort	read-only	current	Destination physical port for mirrored traffic
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.37	ColumnalaQoSAppliedActionMirrorMode	read-only	current	Mirroring mode
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.38	ColumnalaQoSAppliedActionMirrorModeStatus	read-only	current	Status for alaQoSAppliedActionMirrorMode field
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.39	ColumnalaQoSAppliedActionCIR	read-create	current	Committed Information Rate - bandwidth values in kilobits per second.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.40	ColumnalaQoSAppliedActionCIRStatus	read-create	current	Status field indicating whether CIR value is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.41	ColumnalaQoSAppliedActionCBS	read-create	current	Committed Burst Size - bucket size in byte.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.42	ColumnalaQoSAppliedActionCBSStatus	read-create	current	Status field indicating whether CBS value is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.43	ColumnalaQoSAppliedActionPIR	read-create	current	Peak Information Rate - bandwidth values in kilobits per second.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.44	ColumnalaQoSAppliedActionPIRStatus	read-create	current	Status field indicating whether PIR value is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.45	ColumnalaQoSAppliedActionPBS	read-create	current	Peak Burst Size - bucket size in byte.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.46	ColumnalaQoSAppliedActionPBSStatus	read-create	current	Status field indicating whether PBS value is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.47	ColumnalaQoSAppliedActionCPUPriority	read-create	current	Priority for CPU messages.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.48	ColumnalaQoSAppliedActionCPUPriorityStatus	read-create	current	Status field indicating whether CPU Priority value is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.49	ColumnalaQoSAppliedActionColorOnly	read-create	current	only color red traffic
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.50	ColumnalaQoSAppliedActionRedirectChassis	read-only	current	Destination physical chassis for redirected traffic
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.51	ColumnalaQoSAppliedActionMirrorChassis	read-only	current	Destination physical chassis for mirrored traffic
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.52	ColumnalaQoSAppliedActionPermanentGatewayIpV6Addr	read-create	current	Next hop gateway to use for IPv6 traffic
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.53	ColumnalaQoSAppliedActionPermanentGatewayIpV6AddrStatus	read-create	current	Status field indicating whether permanent gateway IPv6 address is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.54	ColumnalaQoSAppliedActionPermanentGatewayIpV6IfIndex	read-create	current	Ipv6IfIndex for link-local address, else 0.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.55	ColumnalaQoSAppliedActionRTCPMonitor	read-create	current	RTCP Monitor status for the traffic.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.56	ColumnalaQoSAppliedActionRTCPMonitorStatus	read-create	current	Status of the RTCP Monitor field for the traffic.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.57	ColumnalaQoSAppliedActionRTCPDSCP	read-create	current	RTCP DSCP number for the traffic.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.58	ColumnalaQoSAppliedActionRTCPDSCPStatus	read-create	current	Status of the RTCP DSCP field for the traffic.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.59	ColumnalaQoSAppliedActionTrustDSCP	read-create	current	Trust DSCP status for the traffic.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.28.1.60	ColumnalaQoSAppliedActionTrustDSCPStatus	read-create	current	Status of the Trust DSCP field for the traffic.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29	TablealaQoSPortTable	not-accessible	current	Table of QoS Port definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1	RowalaQoSPortEntry	not-accessible	current	Definition of QoS Port
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.1	ColumnalaQoSPortSlot	not-accessible	current	Physical slot port resides on If this is a virtual chassis environemnt, This will contain the ChassisId*1000 + slotNum.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.2	ColumnalaQoSPortPort	not-accessible	current	Physical port number
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.3	ColumnalaQoSPortInterfaceType	read-only	current	The type of interface QoS matches for this physical port
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.4	ColumnalaQoSPortTrusted	read-create	current	Status of trusting 802.1p/TOS/DSCP values. When trusted, 802.1p/DSCP values in the packet are passed through the switch. When untrusted, 802.1p/DSCP values are…
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.5	ColumnalaQoSPortDefault8021p	read-create	current	802.1p priority value to use for untagged frames arriving on the port and tagged frames when the port is untrusted.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.6	ColumnalaQoSPortDefaultDSCP	read-create	current	DSCP value to stamp in frames arriving on the port when the port is untrusted
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.7	ColumnalaQoSPortMaximumDefaultDepth	read-create	current	Maximum depth of egress queues (Kbytes). Maximum depth of queues on this port
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.8	ColumnalaQoSPortMaximumDefaultDepthStatus	read-create	current	Status field indicating whether to enforce maximum depth on this port
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.9	ColumnalaQoSPortReset	read-create	current	Reset all QoS parameters to default values
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.10	ColumnalaQoSPortPhysicalBandwidth	read-only	current	Physical bandwidth of port (Kbit/sec)
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.11	ColumnalaQoSPortRowStatus	read-create	current	Used to create/delete ports according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.12	ColumnalaQoSPortDefaultClassification	read-create	current	Ingress traffic classification parameter for Firenze port What field to interpret as priority for WRED
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.13	ColumnalaQoSPortMaximumBandwidth	read-create	current	Maximum egress bandwidth (Kbits/sec). Maximum rate to send traffic out this port
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.14	ColumnalaQoSPortMaximumBandwidthStatus	read-create	current	Status field indicating whether to enforce maximum bandwidth on port.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.15	ColumnalaQoSPortMaximumIngBandwidth	read-create	current	Maximum igress bandwidth (Kbits/sec). Maximum rate to recieve traffic in on this port
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.16	ColumnalaQoSPortMaximumIngBandwidthStatus	read-create	current	Status field indicating whether to enforce maximum bandwidth on port.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.17	ColumnalaQoSPortMaximumIngressDepth	read-create	current	Maximum depth of ingress queues (Kbytes). Maximum depth of queues on this port
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.18	ColumnalaQoSPortMaximumIngressDepthStatus	read-create	current	Status field indicating whether to enforce maximum depth on this port
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.19	ColumnalaQoSPortDEIMarking	read-create	current
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.29.1.20	ColumnalaQoSPortDEIMapping	read-create	current
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30	NodealaQoSConfig
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.1	ScalaralaQoSConfigEnabled	read-write	current	Is QoS enabled on the switch
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.2	ScalaralaQoSConfigTrustPorts	read-write	current	Flag to indicate whether to trust the 802.1p/TOS values on incoming traffic by default. Can be overridden on a port by port basis.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.3	ScalaralaQoSConfigStatsInterval	read-write	current	Interval in seconds for how often statistics are updated
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.4	ScalaralaQoSConfigLogLines	read-write	current	Number of log lines to maintain in the QoS log
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.5	ScalaralaQoSConfigLogLevel	read-write	current	The level of logging desired. The higher the level, the more verbose the logging
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.6	ScalaralaQoSConfigLogConsole	read-write	current	Whether QoS log events are logged to the console
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.7	ScalaralaQoSConfigForwardLog	read-write	current	Whether QoS forwards logging events to PolicyManager
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.8	ScalaralaQoSConfigClearLog	read-write	current	Clear the QoS log
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.9	ScalaralaQoSConfigApply	read-write	current	Set to apply all pending QoS configuration/policy changes
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.10	ScalaralaQoSConfigRevert	read-write	current	Set to revert all pending QoS configuration/policy changes
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.11	ScalaralaQoSConfigReset	read-write	current	Set to reset global QoS configuration parameters to their default values
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.12	ScalaralaQoSConfigStatsReset	read-write	current	Set to reset global QoS statistics counters
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.13	ScalaralaQoSConfigFlush	read-write	current	Flush all pending policy objects
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.14	ScalaralaQoSConfigDebug	read-write	current	Possible debug flags for QoS
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.15	ScalaralaQoSConfigUserportFilter	read-create	current	Events/protocols to filter on a Userport. Event bits values are: spoof = 1 bpdu = 2 bgp = 4 ospf = 8 rip = 16 vrrp = 32 dhcp-server = 64 pim = 128 dvmrp = 256 …
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.16	ScalaralaQoSConfigAppliedUserportFilter	read-only	current	Events/protocols to filter on a Userport. Event bits values are: spoof = 1 bpdu = 2 bgp = 4 ospf = 8 rip = 16 vrrp = 32 dhcp-server = 64 pim = 128 dvmrp = 256 …
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.17	ScalaralaQoSConfigUserportShutdown	read-create	current	Events/protocols that trigger admin down of a Userport. Event bits values are: spoof = 1 bpdu = 2 bgp = 4 ospf = 8 rip = 16 vrrp = 32 dhcp-server = 64 pim = 12…
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.18	ScalaralaQoSConfigAppliedUserportShutdown	read-only	current	Events/protocols that trigger admin down of a Userport. Event bits values are: spoof = 1 bpdu = 2 bgp = 4 ospf = 8 rip = 16 vrrp = 32 dhcp-server = 64 pim = 12…
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.19	ScalaralaQoSConfigAutoPhones	read-write	current	Auto configure CSBU Phones pri0-7 - will replace the priority. trusted - will allow priority from the orginator to be used. disable - will unconfigure to featu…
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.20	ScalaralaQoSConfigQMPage	read-write	current	Flag to indicate whether to send back a quarantined page when a client is quarantined but a remediation URL is not specified.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.21	ScalaralaQoSConfigQMMACGroup	read-write	current	Group name for quarantine manager quarantined MACs.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.22	ScalaralaQoSConfigQMPath	read-write	current	Default path for remediation server redirect.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.23	ScalaralaQoSConfigDEIMapping	read-create	current	This object specifies, in ingress traffic, the DEI/CFI bit is mapped or not to internal drop precedence or yellow color. enabled(1) color if that bit is set. d…
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.24	ScalaralaQoSConfigDEIMarking	read-create	current	This object specifies, in egress traffic, the DEI/CFI bit is mapped or not to internal drop precedence or yellow color. enabled(1) color if that bit is set. di…
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.25	ScalaralaQoSConfigSwitchGroup	read-write	current
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.30.26	ScalaralaQoSVmSnooping	read-write	current	Is VM Snooping enabled on the switch
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.31	NodealaQoSStats
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.31.1	ScalaralaQoSStatsSpoofedEvents	read-only	current	Total Number of spoofed events
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.31.2	ScalaralaQoSStatsNonSpoofedEvents	read-only	current	Total number of non-spoofed events
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32	TablealaQoSValidityPeriodTable	not-accessible	current	Table of QoS ValidityPeriod definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1	RowalaQoSValidityPeriodEntry	not-accessible	current	Definition of QoS ValidityPeriod
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.1	ColumnalaQoSValidityPeriodName	not-accessible	current	Name of validity period
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.2	ColumnalaQoSValidityPeriodSource	read-create	current	What entity created the validity period.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.3	ColumnalaQoSValidityPeriodDays	read-create	current	Bitfield for each day of the week this validity period is active. Monday is least significant, Sunday is most significant.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.4	ColumnalaQoSValidityPeriodDaysStatus	read-create	current	Status field indicating whether the validity period has specific active days of the month.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.5	ColumnalaQoSValidityPeriodMonths	read-create	current	Bitfield for each month this validity period is active. January is least significant. Decemeber is most significant.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.6	ColumnalaQoSValidityPeriodMonthsStatus	read-create	current	Status field indicating whether the validity period has specific active days of the week.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.7	ColumnalaQoSValidityPeriodHour	read-create	current	Time of day this period becomes active. Format is 'hh:mm'
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.8	ColumnalaQoSValidityPeriodHourStatus	read-create	current	Status field indicating whether the validity period has specific active hours of the day.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.9	ColumnalaQoSValidityPeriodEndHour	read-create	current	Time of day this period becomes inactive. Format is 'hh:mm'
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.10	ColumnalaQoSValidityPeriodInterval	read-create	current	Date/time when the validity period begins. Format is 'mm/dd/yyyy hh:mm'
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.11	ColumnalaQoSValidityPeriodIntervalStatus	read-create	current	Status field indicating whether the validity period has a specific active date-time interval.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.12	ColumnalaQoSValidityPeriodEndInterval	read-create	current	Date/time when the validity period ends. Format is 'mm/dd/yyyy hh:mm'
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.32.1.13	ColumnalaQoSValidityPeriodRowStatus	read-create	current	Used to create/delete validity periods according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33	TablealaQoSAppliedValidityPeriodTable	not-accessible	current	Table of QoS AppliedValidityPeriod definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1	RowalaQoSAppliedValidityPeriodEntry	not-accessible	current	Definition of QoS AppliedValidityPeriod
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.1	ColumnalaQoSAppliedValidityPeriodName	not-accessible	current	Name of validity period
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.2	ColumnalaQoSAppliedValidityPeriodSource	read-only	current	What entity created the validity period.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.3	ColumnalaQoSAppliedValidityPeriodDays	read-only	current	Bitfield for each day of the week this validity period is active. Monday is least significant, Sunday is most significant.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.4	ColumnalaQoSAppliedValidityPeriodDaysStatus	read-only	current	Status field indicating whether the validity period has specific active days of the month.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.5	ColumnalaQoSAppliedValidityPeriodMonths	read-only	current	Bitfield for each month this validity period is active. January is least significant. Decemeber is most significant.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.6	ColumnalaQoSAppliedValidityPeriodMonthsStatus	read-only	current	Status field indicating whether the validity period has specific active days of the week.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.7	ColumnalaQoSAppliedValidityPeriodHour	read-only	current	Time of day this period becomes active. Format is 'hh:mm'
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.8	ColumnalaQoSAppliedValidityPeriodHourStatus	read-only	current	Status field indicating whether the validity period has specific active hours of the day.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.9	ColumnalaQoSAppliedValidityPeriodEndHour	read-only	current	Time of day this period becomes inactive. Format is 'hh:mm'
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.10	ColumnalaQoSAppliedValidityPeriodInterval	read-only	current	Date/time when the validity period begins. Format is 'mm/dd/yyyy hh:mm'
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.11	ColumnalaQoSAppliedValidityPeriodIntervalStatus	read-only	current	Status field indicating whether the validity period has a specific active date-time interval.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.12	ColumnalaQoSAppliedValidityPeriodEndInterval	read-only	current	Date/time when the validity period ends. Format is 'mm/dd/yyyy hh:mm'
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.33.1.13	ColumnalaQoSAppliedValidityPeriodRowStatus	read-only	current	Used to create/delete validity periods according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34	TablealaQoSRuleGroupsTable	not-accessible	current	Table of QoS RuleGroups definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34.1	RowalaQoSRuleGroupsEntry	not-accessible	current	Definition of QoS RuleGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34.1.1	ColumnalaQoSRuleGroupsName	not-accessible	current	Name of rule group
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34.1.2	ColumnalaQoSRuleGroupsSource	read-create	current	What entity created the rule group.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34.1.3	ColumnalaQoSRuleGroupsType	read-create	current	Type of rule group.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34.1.4	ColumnalaQoSRuleGroupsEnabled	read-create	current	Is this rule grop enabled or not
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.34.1.5	ColumnalaQoSRuleGroupsStatus	read-create	current	Used to create/delete rule groups according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.35	TablealaQoSAppliedRuleGroupsTable	not-accessible	current	Table of QoS AppliedRuleGroups definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.35.1	RowalaQoSAppliedRuleGroupsEntry	not-accessible	current	Definition of QoS AppliedRuleGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.35.1.1	ColumnalaQoSAppliedRuleGroupsName	not-accessible	current	Name of rule group
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.35.1.2	ColumnalaQoSAppliedRuleGroupsSource	read-create	current	What entity created the service group.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.35.1.3	ColumnalaQoSAppliedRuleGroupsType	read-only	current	What entity created the rule group.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.35.1.4	ColumnalaQoSAppliedRuleGroupsEnabled	read-create	current	Is this rule grop enabled or not
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.35.1.5	ColumnalaQoSAppliedRuleGroupsStatus	read-only	current	Used to create/delete rule groups according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.36	TablealaQoSRuleGroupTable	not-accessible	current	Table of QoS RuleGroup definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.36.1	RowalaQoSRuleGroupEntry	not-accessible	current	Definition of QoS RuleGroup
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.36.1.1	ColumnalaQoSRuleGroupRuleName	not-accessible	current	Name of rule in rule group entry
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.36.1.2	ColumnalaQoSRuleGroupMatches	read-only	current	Number of times this rule has been matched.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.36.1.3	ColumnalaQoSRuleGroupCountType	read-create	current	Which rule statistics counters to update if not all are available
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.36.1.4	ColumnalaQoSRuleGroupPacketCount	read-only	current	Counter for packets patching this rule
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.36.1.5	ColumnalaQoSRuleGroupByteCount	read-only	current	Counter for bytes matching this rule
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.36.1.6	ColumnalaQoSRuleGroupStatus	read-create	current	Used to create/delete rule group entries according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.37	TablealaQoSAppliedRuleGroupTable	not-accessible	current	Table of QoS AppliedRuleGroup definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.37.1	RowalaQoSAppliedRuleGroupEntry	not-accessible	current	Definition of QoS AppliedRuleGroup
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.37.1.1	ColumnalaQoSAppliedRuleGroupRuleName	not-accessible	current	Name of rule in rule group entry
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.37.1.2	ColumnalaQoSAppliedRuleGroupMatches	read-only	current	Number of times this rule has been matched.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.37.1.3	ColumnalaQoSAppliedRuleGroupCountType	read-create	current	Which rule statistics counters to update if not all are available
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.37.1.4	ColumnalaQoSAppliedRuleGroupPacketCount	read-only	current	Counter for packets patching this rule
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.37.1.5	ColumnalaQoSAppliedRuleGroupByteCount	read-only	current	Counter for bytes matching this rule
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.37.1.6	ColumnalaQoSAppliedRuleGroupStatus	read-only	current	Used to create/delete rule group entries according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.40	TablealaQoSV6NetworkGroupTable	not-accessible	current	Table of QoS V6NetworkGroup definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.40.1	RowalaQoSV6NetworkGroupEntry	not-accessible	current	Definition of QoS NetworkGroup
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.40.1.1	ColumnalaQoSV6NetworkGroupIpAddr	not-accessible	current	IP address for network group entry.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.40.1.2	ColumnalaQoSV6NetworkGroupIpMask	not-accessible	current	IP mask for network group entry.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.40.1.3	ColumnalaQoSV6NetworkGroupStatus	read-create	current	Used to create/delete network group entries according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.41	TablealaQoSAppliedV6NetworkGroupTable	not-accessible	current	Table of QoS AppliedNetworkGroup definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.41.1	RowalaQoSAppliedV6NetworkGroupEntry	not-accessible	current	Definition of QoS AppliedNetworkGroup
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.41.1.1	ColumnalaQoSAppliedV6NetworkGroupIpAddr	not-accessible	current	IP address for network group entry.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.41.1.2	ColumnalaQoSAppliedV6NetworkGroupIpMask	not-accessible	current	IP mask for network group entry.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.41.1.3	ColumnalaQoSAppliedV6NetworkGroupStatus	read-only	current	Used to create/delete network group entries according to the RowStatus convention
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.55	TablealaQoSDSCPTable	not-accessible	current	Table of QoS Condition definitions
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.55.1	RowalaQoSDSCPEntry	not-accessible	current	Definition of QoS DSCP
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.55.1.1	ColumnalaQoSDSCPEntryNumber	not-accessible	current	DSCP Entry number for the traffic.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.55.1.2	ColumnalaQoSDSCPPriority	read-create	current	DSCP priority for the traffic.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.55.1.3	ColumnalaQoSDSCPDropPrecedence	read-create	current	DSCP drop precedence for the traffic.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.55.1.4	ColumnalaQoSDSCPRowStatus	read-create	current	RowStatus entry for QoS DSCP.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.56	TablealaQoSAutoMacRangeTable	not-accessible	current	Table of QoS Auto Mac ranges
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.56.1	RowalaQoSAutoMacRangeEntry	not-accessible	current	Definition of QoS Auto Mac Range
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.56.1.1	ColumnalaQoSAutoMacRangeIndex	not-accessible	current	Index to the Mac range table.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.56.1.2	ColumnalaQoSAutoMacRangeStart	read-only	current	specifies the starting mac-address of the default mac-range which is supported by qos auto phones.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.56.1.3	ColumnalaQoSAutoMacRangeEnd	read-only	current	specifies the end mac-address of the default mac-range which is supported by qos auto phones.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.57	TablealaQoSExtendedRuleTable	not-accessible	current	Table of QoS Rule definitions for extending port group behavior on individual port basis or group basis
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.57.1	RowalaQoSExtendedRuleEntry	not-accessible	current	Definition of QoS Rule
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.57.1.1	ColumnalaQoSExtendedRuleSplitRuleID	not-accessible	current	Split Rule ID defined from the number of members in the group.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.57.1.2	ColumnalaQoSExtendedRuleChassis	read-only	current	Chassis on which rate-limit is enabled.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.57.1.3	ColumnalaQoSExtendedRuleSlot	read-only	current	Slot on which rate-limit is enabled.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.57.1.4	ColumnalaQoSExtendedRulePort	read-only	current	Port on which rate-limit is enabled.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.57.1.5	ColumnalaQoSExtendedRulePacketCount	read-only	current	Counter for packets matching this rule
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.57.1.6	ColumnalaQoSExtendedRuleByteCount	read-only	current	Counter for bytes matching this rule
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.57.1.7	ColumnalaQoSExtendedRuleGreenPacketCount	read-only	current	Counter for the number of packets which are green compliant.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.57.1.8	ColumnalaQoSExtendedRuleYellowPacketCount	read-only	current	Counter for the number of packets which are yellow compliant.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.57.1.9	ColumnalaQoSExtendedRuleRedPacketCount	read-only	current	Counter for the number of packets which are red compliant.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.57.1.10	ColumnalaQoSExtendedRuleGreenByteCount	read-only	current	Counter for the number of Bytes which are green compliant.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.57.1.11	ColumnalaQoSExtendedRuleYellowByteCount	read-only	current	Counter for the number of Bytes which are yellow compliant.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.57.1.12	ColumnalaQoSExtendedRuleRedByteCount	read-only	current	Counter for the number of Bytes which are red compliant.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.58	TablealaQoSIpNetworkSummaryTable	not-accessible	current	Table of QoS IpNetworkSummary definitions.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.58.1	RowalaQoSIpNetworkSummaryEntry	not-accessible	current	Definition of QoS IpNetworkSummary.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.58.1.1	ColumnalaQoSIpNetworkSummaryProtocol	read-only	current	Network Protocols as specified in condition classifier for given rule.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.58.1.2	ColumnalaQoSIpNetworkSummarySourceIpAddressType	read-only	current	Source Ip Address Type as specified in condition classifier for given rule.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.58.1.3	ColumnalaQoSIpNetworkSummarySourceIpAddress	read-only	current	Source IP address as specified in condition classifier for given rule.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.58.1.4	ColumnalaQoSIpNetworkSummaryDestinationIpAddressType	read-only	current	Destination Ip Address Type as specified in condition classifier for given rule.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.58.1.5	ColumnalaQoSIpNetworkSummaryDestinationIpAddress	read-only	current	Destination Ip Address as specified in condition classifier for given rule.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.58.1.6	ColumnalaQoSIpNetworkSummarySourceGroup	read-only	current	Source Group as specified in condition classifier for given rule.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.58.1.7	ColumnalaQoSIpNetworkSummaryDestinationGroup	read-only	current	Destination Group as specified in condition classifier for given rule.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.58.1.8	ColumnalaQoSIpNetworkSummaryVrfName	read-only	current	VRF Name as specified in condition classifier for given rule.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.58.1.9	ColumnalaQoSIpNetworkSummaryAction	read-only	current	The action performed when the packet hit the rule.
1.3.6.1.4.1.6486.801.1.2.1.22.1.1.58.1.10	ColumnalaQoSIpNetworkSummaryHitCount	read-only	current	Number of packets hit the rule.
1.3.6.1.4.1.6486.801.1.2.1.22.1.2	IdentityalaQoSMIBConformance		current	Branch for QoS Managed Conformance Information.
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1	IdentityalaQoSMIBGroups		current	Branch for QoS Units of Conformance.
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.1	GroupalaQoSMIBRuleObjects		current	Collections of objects providing information for Rules
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.2	GroupalaQoSMIBAppliedRuleObjects		current	Collections of objects providing information for applied Rules
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.3	GroupalaQoSMIBConditionObjects		current	Collections of objects providing information for Conditions
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.4	GroupalaQoSMIBAppliedConditionObjects		current	Collections of objects providing information for applied Conditions
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.5	GroupalaQoSMIBServiceObjects		current	Collections of objects providing information for Services
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.6	GroupalaQoSMIBAppliedServiceObjects		current	Collections of objects providing information for applied Services
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.7	GroupalaQoSMIBServiceGroupsObjects		current	Collections of objects providing information for ServiceGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.8	GroupalaQoSMIBAppliedServiceGroupsObjects		current	Collections of objects providing information for applied ServiceGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.9	GroupalaQoSMIBServiceGroupObjects		current	Collections of objects providing information for ServiceGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.10	GroupalaQoSMIBAppliedServiceGroupObjects		current	Collections of objects providing information for applied ServiceGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.11	GroupalaQoSMIBNetworkGroupsObjects		current	Collections of objects providing information for NetworkGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.12	GroupalaQoSMIBAppliedNetworkGroupsObjects		current	Collections of objects providing information for applied NetworkGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.13	GroupalaQoSMIBNetworkGroupObjects		current	Collections of objects providing information for NetworkGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.14	GroupalaQoSMIBAppliedNetworkGroupObjects		current	Collections of objects providing information for applied NetworkGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.15	GroupalaQoSMIBMACGroupsObjects		current	Collections of objects providing information for MACGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.16	GroupalaQoSMIBAppliedMACGroupsObjects		current	Collections of objects providing information for applied MACGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.17	GroupalaQoSMIBMACGroupObjects		current	Collections of objects providing information for MACGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.18	GroupalaQoSMIBAppliedMACGroupObjects		current	Collections of objects providing information for applied MACGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.19	GroupalaQoSMIBPortGroupsObjects		current	Collections of objects providing information for PortGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.20	GroupalaQoSMIBAppliedPortGroupsObjects		current	Collections of objects providing information for applied PortGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.21	GroupalaQoSMIBPortGroupObjects		current	Collections of objects providing information for PortGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.22	GroupalaQoSMIBAppliedPortGroupObjects		current	Collections of objects providing information for applied PortGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.23	GroupalaQoSMIBMapGroupsObjects		current	Collections of objects providing information for MapGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.24	GroupalaQoSMIBAppliedMapGroupsObjects		current	Collections of objects providing information for applied MapGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.25	GroupalaQoSMIBMapGroupObjects		current	Collections of objects providing information for MapGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.26	GroupalaQoSMIBAppliedMapGroupObjects		current	Collections of objects providing information for applied MapGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.27	GroupalaQoSMIBActionObjects		current	Collections of objects providing information for Actions
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.28	GroupalaQoSMIBAppliedActionObjects		current	Collections of objects providing information for applied Actions
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.29	GroupalaQoSMIBPortObjects		current	Collections of objects providing information for Ports
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.30	GroupalaQoSMIBConfigObjects		current	Collections of objects providing information for Configs
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.31	GroupalaQoSMIBStatsObjects		current	Collections of objects providing information for Statss
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.32	GroupalaQoSMIBRuleGroupsObjects		current	Collections of objects providing information for RuleGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.33	GroupalaQoSMIBAppliedRuleGroupsObjects		current	Collections of objects providing information for applied RuleGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.34	GroupalaQoSMIBRuleGroupObjects		current	Collections of objects providing information for RuleGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.35	GroupalaQoSMIBAppliedRuleGroupObjects		current	Collections of objects providing information for applied RuleGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.36	GroupalaQoSMIBValidityPeriodObjects		current	Collections of objects providing information for Validity Periods
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.37	GroupalaQoSMIBAppliedValidityPeriodObjects		current	Collections of objects providing information for applied Validity Periods
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.38	GroupalaQoSMIBDSCPGroupObjects		current	Collections of objects providing information for DSCP Table
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.39	GroupalaQoSMIBAutoMacRangeGroupObjects		current	Collections of objects providing information for Auto Qos Mac Range Table
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.40	GroupalaQoSMIBV6NetworkGroupObjects		current	Collections of objects providing information for V6NetworkGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.41	GroupalaQoSMIBAppliedV6NetworkGroupObjects		current	Collections of objects providing information for applied V6NetworkGroups
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.42	GroupalaQoSRuleExtendedObjects		current	Collections of objects providing information for rule extended
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.1.43	GroupalaQoSIpNetworkSummaryGroupObjects		current	Collections of objects providing information for Ip Network Summary.
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.2	IdentityalaQoSMIBCompliances		current	Branch for QoS Compliance Statements.
1.3.6.1.4.1.6486.801.1.2.1.22.1.2.2.1	CompliancealaQoSMIBCompliance		current	Compliance statement for QoS.

MIB Viewer

What's a MIB?

What's SNMP?

What's an OID?

ALCATEL-ENT1-QOS-MIB