ALCATEL-ENT1-TIMETRA-TC-MIB
95 objects
This document is the SNMP MIB module for the SNMP Textual Conventions (TCs) used in the Alcatel 7x50 manageability instrumentation. Copyright 2003-2008 Alcatel-Lucent. All rights reserved. Reproduction of this document is authorized on the condition that the foregoing copyright notice is included. This SNMP MIB module (Specification) embodies Alcatel's proprietary intellectual property. Alcatel retains all title and ownership in the Specification, including any revisions. Alcatel grants all interested parties a non-exclusive license to use and distribute an unmodified copy of this Specification in connection with management of Alcatel products, and without fee, provided this copyright notice and license appear on all copies. This Specification is supplied `as is', and Alcatel makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification.
Imported Objects
| ALCATEL-ENT1-TIMETRA-GLOBAL-MIB | timetraModules |
| SNMPv2-SMI | Integer32 MODULE-IDENTITY Unsigned32 |
| SNMPv2-TC | TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6527.1.1.2 | IdentitytimetraTCMIBModule | This document is the SNMP MIB module for the SNMP Textual Conventions (TCs) used in the Alcatel 7x50 manageability instrumentation. Copyright 2003-2008 Alcatel… |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| Dot1PPriority | INTEGER (-1 | 0..7) | current | IEEE 802.1p priority. zero is lowest, seven is highest. -1 means not set |
| InterfaceIndex | Integer32 | current | A unique value, greater than zero, for each interface or interface sub-layer in the managed system. It is recommended that values are assigned contiguously starting from 1. The value for each interface sub- layer must r… |
| IpAddressPrefixLength | INTEGER (0..32) | current | the number of bits to match in an IP address mask. |
| QTag | INTEGER (1..4094) | current | The QTag data type is a 12-bit integer tag used to identify a service. The values 0 and 4095 are not allowed. |
| QTagOrZero | Unsigned32 (0..4094) | current | The data type QTagOrZero represents a VLAN tag. The value '0' indicates that no VLAN tag is provisioned, or that its value is unknown. |
| SdpBindId | OCTET STRING (SIZE (8)) | current | The value used to uniquely identify an SDP Binding. The first four octets correspond to the zero-extended 16-bit SDP ID, while the remaining four octets correspond to the 32-bit VC ID, both encoded in network byte order. |
| ServiceAccessPoint | INTEGER (-1 | 0..255) | current | 802.2 LLC SAP value, Source and Destination. |
| ServiceAdminStatus | INTEGER { up(1), down(2) } | current | ServiceAdminStatus data type is an enumerated integer that describes the values used to identify the administrative state of a service. |
| ServiceOperStatus | INTEGER { up(1), down(2) } | current | ServiceOperStatus data type is an enumerated integer that describes the values used to identify the current operational state of a service. |
| TCIRRate | Integer32 (-1 | 0..100000000) | current | The CIR rate to be used in kbps. The value -1 means maximum rate. |
| TCpmProtPolicyID | Unsigned32 (0..255) | current | The data type TCpmProtPolicyID represents the identification number of a CPM Protection policy. The value '0' indicates that no CPM Protection policy is provisioned. |
| TDSCPFilterActionValue | INTEGER (-1 | 0..255) | current | The value of a Differential Services Code Point. -1 means not set. |
| TDSCPName | OCTET STRING (SIZE (1..32)) | current | The name of a Differential Services Code Point value. |
| TDSCPNameOrEmpty | OCTET STRING (SIZE (0 | 1..32)) | current | The name of a Differential Services Code Point value. |
| TDSCPValue | INTEGER (0..63) | current | The value of a Differential Services Code Point. |
| TDSCPValueOrNone | INTEGER (-1 | 0..63) | current | The value of a Differential Services Code Point (DSCP). A value of -1 means that no DSCP value is configured or available. |
| TEgressQueueId | INTEGER (0 | 1..8) | current | The value of TEgressQueueId specifies the identification number of an egress queue. A value of zero (0) indicates that no specific queue identification has been assigned for this object. When an object of type TEgressQu… |
| TFCName | OCTET STRING (SIZE (1..32)) | current | The name of a Forwarding Class entry. |
| TFCNameOrEmpty | OCTET STRING (SIZE (0 | 1..32)) | current | The name of a Forwarding Class entry. |
| TFCSet | BITS { be (0), l2 (1), af (2), l1 (3), h2 (4), ef (5), h1 (6), nc (7) } | current | This data type describes a set of Forwarding Classes. |
| TFCType | INTEGER { be (0), l2 (1), af (2), l1 (3), h2 (4), ef (5), h1 (6), nc (7) } | current | This data type enumerates the Forwarding Classes. |
| TFrameType | INTEGER { e802dot3(0), e802dot2LLC(1), e802dot2SNAP(2), ethernetII(3) } | current | The type of the frame for which this mac filter match criteria is defined. |
| TIngressQueueId | INTEGER (0 | 1..32) | current | The value of TIngressQueueId specifies the identification number of an ingress queue. A value of zero (0) indicates that no specific queue identification has been assigned for this object. When an object of type TIngres… |
| TIpOption | INTEGER (0..255) | current | IP packet options octet. explanation of the octet bits: IP OPTION NUMBERS The Internet Protocol (IP) has provision for optional header fields identified by an option type field. Options 0 and 1 are exactly one octet whi… |
| TIpProtocol | INTEGER (-2 | -1 | 0..255) | current | IP protocol number. well known protocol numbers include ICMP(1), TCP(6), UDP(17). -1 means value not set. -2 indicates protocol wildcard for UDP and TCP. |
| TItemDescription | OCTET STRING (SIZE(0..80)) | current | Description for an item. Note, use only NVT ASCII displayable characters here, no control characters, no UTF-8, etc. |
| TItemLongDescription | OCTET STRING (SIZE(0..160)) | current | Longer description for an item. Note, use only NVT ASCII displayable characters here, no control characters, no UTF-8, etc. |
| TLspExpValue | INTEGER (-1 | 0..7) | current | MPLS Experimental bits. -1 means not set. |
| TMlpppQoSProfileId | Unsigned32 (0..65535) | current | This textual-convention uniquely identifies MLPPP Bundle QoS profile in the ingress and egress MLPPP QoS profile tables. The value 0 indicates default MLPPP QoS Profile as applicable to a given H/W |
| TmnxActionType | INTEGER { doAction (1), notApplicable (2) } | current | The TmnxActionType data type is an enumerated integer that describes the values used to support action or operation style commands. Setting a variable of this type to 'doAction' causes the action to occur. GETs and GETN… |
| TmnxAdminState | INTEGER { noop (1), inService (2), outOfService (3) } | current | The TmnxAdminState data type is an enumerated integer that describes the values used to identify the administratively desired state of functional modules. |
| TmnxAncpString | OCTET STRING (SIZE (1..63)) | current | The TmnxAncpString data type contains a valid ancp string. |
| TmnxAncpStringOrZero | OCTET STRING (SIZE (0..63)) | current | The TmnxAncpStringOrZero data type contains a valid ancp string. An empty string indicates that no ANCP string is defined. |
| TmnxAppProfileString | OCTET STRING (SIZE (1..16)) | current | The data type TmnxAppProfileString denotes the application profile string. |
| TmnxAppProfileStringOrEmpty | OCTET STRING (SIZE (0..16)) | current | The data type TmnxAppProfileStringOrEmpty denotes the application profile string. The empty string denotes the absence of a application profile. |
| TmnxBgpAutonomousSystem | INTEGER (0..65535) | current | an autonomous system (AS) number. |
| TmnxBGPFamilyType | BITS { ipv4Unicast (0), ipv4Multicast (1), ipv4UastMcast (2), ipv4MplsLabel (3), ipv4Vpn (4), ipv6Unicast (5), ipv6Multicast (6), ipv6UcastMcast (7), ipv6MplsLabel (8), ipv6Vpn (9) } | current | The value of TmnxBGPFamilyType specifies the AFI-SAFI family for BGP peer. |
| TmnxBgpLocalPreference | Unsigned32 | current | a local route preference value. |
| TmnxBgpPreference | Unsigned32 (0..255) | current | a route preference value. |
| TmnxBgpRouteTarget | OCTET STRING (SIZE(1..32)) | current | TmnxBgpRouteTarget is an readable string that specifies the extended community name to be accepted by a Route Reflector Server or advertised by the router when reflecting any routes. I.e, it does not apply to routes tha… |
| TmnxCustId | Unsigned32 (0|1..2147483647) | current | A number used to identify a Customer or Subscriber. This ID must be unique within the Service Domain. The value 0 is used as the null ID. |
| TmnxDHCP6MsgType | INTEGER { dhcp6MsgTypeSolicit (1), dhcp6MsgTypeAdvertise (2), dhcp6MsgTypeRequest (3), dhcp6MsgTypeConfirm (4), dhcp6MsgTypeRenew (5), dhcp6MsgTypeRebind (6), dhcp6MsgTypeReply (7), dhcp6MsgTypeRelease (8), dhcp6MsgTypeDecline (9), dhcp6MsgTypeReconfigure (10), dhcp6MsgTypeInfoRequest (11), dhcp6MsgTypeRelayForw (12), dhcp6MsgTypeRelayReply (13), dhcp6MsgTypeMaxValue (14) } | current | The DHCP6 messagetype. |
| TmnxDhcpOptionType | INTEGER { ipv4(1), ascii(2), hex(3) } | current | The data type TmnxDhcpOptionType represents how the value of this option is encoded: - 'ipv4 (1)': this option contains an IPv4 address (4 octets) - 'ascii(2)': this option contains seven-bit ASCII characters - 'hex (3)… |
| TmnxDhcpVendorOption | BITS { systemId (0), clientMac (1), serviceId (2), sapId (3) } | current | This value specifies what is encoded in the Alcatel vendor specific sub-option of option 82. |
| TmnxEnabledDisabled | INTEGER { enabled (1), disabled (2) } | current | The TmnxEnabledDisabled data type is an enumerated integer that describes the values used to identify whether an entity is 'enabled' or 'disabled'. |
| TmnxEncapVal | Unsigned32 | current | The value of the label used to identify the entity using the specified encapsulation value on a specific port. The format of this object depends on the encapsulation type defined on this port. When the encapsulation is … |
| TmnxIgmpGroupFilterMode | INTEGER { include (1), exclude (2) } | current | The data type TmnxIgmpGroupFilterMode describes the filter-mode of a group. In 'include(1)' mode, reception of packets sent to the specified multicast address is requested only from those IPv4 Source addresses listed in… |
| TmnxIgmpGroupType | INTEGER { static(1), dynamic(2) } | current | The data type TmnxIgmpGroupType describes how a multicast group is learned. |
| TmnxIgmpVersion | INTEGER { version1(1), version2(2), version3(3) } | current | The data type TmnxIgmpVersion denotes the version of the IGMP protocol: - 'version1(1)': means version 1 of the IGMP protocol - 'version2(2)': means version 2 of the IGMP protocol - 'version3(3)': means version 3 of the… |
| TmnxManagedRouteStatus | INTEGER { installed (0), notYetInstalled (1), wrongAntiSpoofType (2), outOfMemory (3), shadowed (4), routeTableFull (5), parentInterfaceDown (6) } | current | The data type TmnxManagedRouteStatus denotes the status of a Managed Route. |
| TmnxMldGroupFilterMode | INTEGER { include (1), exclude (2) } | current | The data type TmnxMldGroupFilterMode describes the filter-mode of a group. In 'include(1)' mode, reception of packets sent to the specified multicast address is requested only from those IPv6 source addresses listed in … |
| TmnxMldGroupType | INTEGER { static(1), dynamic(2) } | current | The data type TmnxMldGroupType describes how a multicast group is learned. |
| TmnxMldVersion | INTEGER { version1(1), version2(2) } | current | The data type TmnxMldVersion denotes the version of the MLD protocol: - 'version1(1)': means version 1 of the MLD protocol - 'version2(2)': means version 2 of the MLD protocol |
| TmnxMulticastAddrFamily | INTEGER { ipv4Multicast (0), ipv6Multicast (1) } | current | The data type TmnxMulticastAddrFamily denotes the family for multicast protocol. |
| TmnxOperState | INTEGER { unknown (1), inService (2), outOfService (3), transition (4) } | current | The TmnxOperState data type is an enumerated integer that describes the values used to identify the current operational state of functional modules. |
| TmnxOspfInstance | Unsigned32 (0..31) | current | A number used to identify an instance of OSPF. |
| TmnxPortID | Unsigned32 | current | |
| TmnxPppoeUserNameOrEmpty | OCTET STRING (SIZE (0..128)) | current | The data type TmnxPppoeUserNameOrEmpty denotes the PPPoE username. |
| TmnxServId | Unsigned32 (0|1..2147483647) | current | A number used to identify a Service. This ID must be unique within the Service Domain. The value 0 is used as the null ID. |
| TmnxSlaProfileString | OCTET STRING (SIZE (1..16)) | current | The data type TmnxSlaProfileString denotes the SLA profile string. |
| TmnxSlaProfileStringOrEmpty | OCTET STRING (SIZE (0..16)) | current | The data type TmnxSlaProfileStringOrEmpty denotes the SLA profile string. The empty string denotes the absence of a SLA profile. |
| TmnxStatus | INTEGER { create (1), delete (2) } | current | The TmnxStatus data type is an enumerated integer that describes the values used to identify the current status of functional modules in the system such as OSPF and MPLS protocols. Setting this variable to 'create' caus… |
| TmnxStrSapId | OCTET STRING (SIZE (0..32)) | current | The value of TmnxStrSapId is a printable string which contains the owner SAP Id or equivalent on a remote system. The string should contain the printable string equivalent of the textual-conventions TmnxPortID and TmnxE… |
| TmnxSubIdentString | OCTET STRING (SIZE (1..32)) | current | The data type TmnxSubIdentString denotes the subscriber identification string. |
| TmnxSubIdentStringOrEmpty | OCTET STRING (SIZE (0..32)) | current | The data type TmnxSubIdentStringOrEmpty denotes the subscriber identification string. The empty string denotes the absence of a subscriber identification string. |
| TmnxSubMgtIntDestId | OCTET STRING (SIZE (1..32)) | current | The data type TmnxSubMgtIntDestId denotes the intermediate destination id. |
| TmnxSubMgtIntDestIdOrEmpty | OCTET STRING (SIZE (0..32)) | current | The data type TmnxSubMgtIntDestIdOrEmpty denotes the intermediate destination id. The empty string denotes the absence of an intermediate destination id. |
| TmnxSubProfileString | OCTET STRING (SIZE (1..16)) | current | The data type TmnxSubProfileString denotes the subscriber profile string. |
| TmnxSubProfileStringOrEmpty | OCTET STRING (SIZE (0..16)) | current | The data type TmnxSubProfileStringOrEmpty denotes the subscriber profile string. The empty string denotes the absence of a subscriber profile. |
| TmnxTunnelID | Unsigned32 | current | The identifying value for a BGP-VPRN tunnel. Depending on the tunnel type the associated tunnel-id may be an sdp-id, an lsp-id or zero(0). |
| TmnxTunnelType | INTEGER { sdp (1), ldp (2), rsvp (3), gre (4), bypass (5), invalid (6) } | current | The type of this tunnel entity. |
| TmnxVcId | Unsigned32 (1..4294967295) | current | A 32 bit number is used to identify a VC(Virtual Circuit). The VC ID cannot be 0. |
| TmnxVcIdOrNone | Unsigned32 (0|1..4294967295) | current | A 32 bit number is used to identify a VC(Virtual Circuit). A value of 0 indicates no VC ID is configured or available. |
| TmnxVcType | INTEGER { frDlciMartini(1), atmSdu(2), atmCell(3), ethernetVlan(4), ethernet(5), atmVccCell(9), atmVpcCell(10), ipipe(11), satopE1(17), satopT1(18), satopE3(19), satopT3(20), cesopsn(21), cesopsnCas(23), frDlci(25), mirrorDest(4096) } | current | The value of TmnxVcType is an enumerated integer that indicates a Virtual Circuit (VC) type. 'frDlciMartini(1)' replaces the old 'frDlci' when used over martini tunnels. |
| TmnxVPNRouteDistinguisher | OCTET STRING (SIZE (8)) | current | The VPRN route distinguisher is a 8-octet object. It contains a 2-octet type field followed by a 6-octet value field. The type field specify how to interpret the value field. Type 0 specifies two subfields as a 2-octet … |
| TmnxVRtrID | Integer32 (1..4096) | current | A number used to identify a virtual router instance in the system. |
| TmnxVRtrIDOrZero | Integer32 (0..4096) | current | A number used to identify a virtual router instance in the system. The number 0 will have special significance in the context the TC is used. |
| TmnxVRtrMplsLspID | Unsigned32 (0..65535) | current | A unique value, greater than zero, for each Label Switched Path in the managed system. |
| TNamedItem | OCTET STRING (SIZE (1..32)) | current | The name of an item. When used as an index to a table, the item name uniquely identifies the instance. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII d… |
| TNamedItemOrEmpty | OCTET STRING (SIZE (0 | 1..32)) | current | The name of an item, or an empty string. When used in a reference (TNamedItemOrEmpty) the item name entry must exist in the table. Note, use only NVT ASCII displayable characters here, no control characters, no UTF-8, e… |
| TPIRRate | Integer32 (-1 | 1..100000000) | current | The PIR rate to be used in kbps. The value -1 means maximum rate. |
| TPIRRateOrZero | Integer32 (-1 | 0..100000000) | current | The PIR rate to be used in kbps. The value -1 means maximum rate. The value 0 means undefined rate. |
| TPIRRateOverride | Integer32 (-2 | -1 | 1..100000000) | current | The PIR rate to be used in kbps. The value -1 means maximum rate. A value of -2 specifies no override. |
| TPolicyID | Unsigned32 (0..65535) | current | The identification number of a policy. |
| TPolicyStatementNameOrEmpty | OCTET STRING (SIZE (0 | 1..32)) | current | The name of a policy statement, when an object refers to it. |
| TPortSchedulerCIR | Integer32 (-1 | 0..40000000) | current | The Committed Information Rate (CIR) rate to be used in kbps. The value -1 means maximum rate. |
| TPortSchedulerPIR | Integer32 (-1 | 1..40000000) | current | The Peak Information Rate (PIR) rate to be used in kbps. The value -1 means maximum rate. |
| TQueueId | INTEGER (0 | 1..32) | current | The value of TQueueId specifies the identification number of a queue. A value of zero (0) indicates that no specific queue identification has been assigned for this object. When an object of type TQueueId is an SNMP tab… |
| TSapEgressPolicyID | Unsigned32 (1..65535) | current | The identification number of a SAP egress policy. |
| TSapIngressPolicyID | Unsigned32 (0..65535) | current | The identification number of a SAP ingress policy. |
| TSecondaryShaper10GPIRRate | Integer32 (-1 | 1..10000) | current | The secondary shaper PIR rate to be used in Mbps. The value -1 means maximum rate. |
| TTcpUdpPort | INTEGER (0 | 1..65535) | current | The number of a TCP or UDP port. Well known port numbers include ftp-data(20), ftp(21), telnet(23), smtp(25), http(80), pop3(110), nntp(119), snmp(161), snmptrap(162), etc. |
| TTcpUdpPortOperator | INTEGER { none(0), eq(1), range(2), lt(3), gt(4) } | current | The operator specifies the manner in which a couple of other MIB objects in the table are supposed to be used. Operator Value1 Value2 none(0) Any(0) Any(0) eq(1) Specified Value Any(0) range(2) Starting Value Ending Val… |
| TWeight | Integer32 (0..100) | current | The weight of the specified entity while feeding into the parent. |