ALCATEL-ENT1-UDLD-MIB
48 objects
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line UDLD for detection and disabling unidirectional links. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2002 Alcatel Internetworking, Incorporated ALL RIGHTS RESERVED WORLDWIDE
Imported Objects
| ALCATEL-ENT1-BASE | softentIND1Udld |
| IF-MIB | InterfaceIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE Unsigned32 |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6486.801.1.2.1.44.1 | IdentityalcatelIND1UDLDMIB | This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey P… | ||
| 1.3.6.1.4.1.6486.801.1.2.1.44.1.1 | IdentityalcatelIND1UDLDMIBObjects | current | Branch For UDLD Subsystem Managed Objects. | |
| 1.3.6.1.4.1.6486.801.1.2.1.44.1.1.1 | ScalaralaUdldGlobalStatus | read-write | current | This variable is used to enable or diable UDLD on the switch. The value enable (1) indicates that UDLD should be enabled on the switch. The value disable (2) i… |
| 1.3.6.1.4.1.6486.801.1.2.1.44.1.1.2 | ScalaralaUdldGlobalClearStats | read-write | current | Defines the global clear statistics control for UDLD. The value reset (1) indicates that UDLD should clear all statistic counters related to all ports in the s… |
| 1.3.6.1.4.1.6486.801.1.2.1.44.1.1.3 | ScalaralaUdldGlobalConfigUdldMode | read-write | current | Defines the mode of operation of the UDLD protocol on the interface. normal - The UDLD state machines participates normally in UDLD protocol exchanges. The pro… |
| 1.3.6.1.4.1.6486.801.1.2.1.44.1.1.4 | ScalaralaUdldGlobalConfigUdldProbeIntervalTimer | read-write | current | Maximum period of time after which the Probe message is expected from the neighbor. The range supported is 7-90 seconds. |
| 1.3.6.1.4.1.6486.801.1.2.1.44.1.1.5 | ScalaralaUdldGlobalConfigUdldDetectionPeriodTimer | read-write | current | Maximum period of time before which detection of neighbor is expected. If Reply to the Sent Echo message/(s) is not received before, the timer for detection pe… |
| 1.3.6.1.4.1.6486.801.1.2.1.44.1.1.6 | NodeudldPortConfig | |||
| 1.3.6.1.4.1.6486.801.1.2.1.44.1.1.6.1 | TablealaUdldPortConfigTable | not-accessible | current | A table containing UDLD port configuration information. |
| 1.3.6.1.4.1.6486.801.1.2.1.44.1.1.6.1.1 | RowalaUdldPortConfigEntry | not-accessible | current | A UDLD port configuration entry. |
| 1.3.6.1.4.1.6486.801.1.2.1.44.1.1.6.1.1.1 | ColumnalaUdldPortConfigIfIndex | not-accessible | current | The ifindex of the port on which UDLD is running |
| 1.3.6.1.4.1.6486.801.1.2.1.44.1.1.6.1.1.2 | ColumnalaUdldPortConfigUdldStatus | read-write | current | This variable is used to enable or diable UDLD on the interface. The value enable (1) indicates that UDLD should be enabled on the interface. The value disable… |
| 1.3.6.1.4.1.6486.801.1.2.1.44.1.1.6.1.1.3 | ColumnalaUdldPortConfigUdldMode | read-write | current | Defines the mode of operation of the UDLD protocol on the interface. normal - The UDLD state machines participates normally in UDLD protocol exchanges. The pro… |
| 1.3.6.1.4.1.6486.801.1.2.1.44.1.1.6.1.1.4 | ColumnalaUdldPortConfigUdldProbeIntervalTimer | read-write | current | Maximum period of time after which the Probe message is expected from the neighbor. The range supported is 7-90 seconds. |
| 1.3.6.1.4.1.6486.801.1.2.1.44.1.1.6.1.1.5 | ColumnalaUdldPortConfigUdldDetectionPeriodTimer | read-write | current | Maximum period of time before which detection of neighbor is expected. If Reply to the Sent Echo message/(s) is not received before, the timer for detection pe… |
| 1.3.6.1.4.1.6486.801.1.2.1.44.1.1.6.1.1.6 | ColumnalaUdldPortConfigUdldOperationalStatus | read-only | current | The state of the interface as determined by UDLD operation. |
| 1.3.6.1.4.1.6486.801.1.2.1.44.1.1.7 | NodeudldPortStats | |||
| 1.3.6.1.4.1.6486.801.1.2.1.44.1.1.7.1 | TablealaUdldPortStatsTable | not-accessible | current | A table containing UDLD statistics information. |
| 1.3.6.1.4.1.6486.801.1.2.1.44.1.1.7.1.1 | RowalaUdldPortStatsEntry | not-accessible | current | A UDLD Statistics entry (per port). |
| 1.3.6.1.4.1.6486.801.1.2.1.44.1.1.7.1.1.1 | ColumnalaUdldPortStatsIfIndex | not-accessible | current | The ifindex of the port on which UDLD is running |
| 1.3.6.1.4.1.6486.801.1.2.1.44.1.1.7.1.1.2 | ColumnalaUdldNumUDLDNeighbors | read-only | current | This object gives the number of neighbors for the interface. |
| 1.3.6.1.4.1.6486.801.1.2.1.44.1.1.7.1.1.3 | ColumnalaUdldPortStatsClear | read-write | current | Reset all statistics parameters corresponding to this port. By default, this objects contains a zero value. |
| 1.3.6.1.4.1.6486.801.1.2.1.44.1.1.7.1.1.4 | ColumnalaUdldPortNumProbeSent | read-only | current | Number of Probe message sent by a port. |
| 1.3.6.1.4.1.6486.801.1.2.1.44.1.1.7.1.1.5 | ColumnalaUdldPortNumEchoSent | read-only | current | Number of Echo message sent by a port. |
| 1.3.6.1.4.1.6486.801.1.2.1.44.1.1.7.1.1.6 | ColumnalaUdldPortNumInvalidRcvd | read-only | current | Number of Invalid message received by a port. |
| 1.3.6.1.4.1.6486.801.1.2.1.44.1.1.7.1.1.7 | ColumnalaUdldPortNumFlushRcvd | read-only | current | Number of UDLD-Flush message received by a port. |
| 1.3.6.1.4.1.6486.801.1.2.1.44.1.1.8 | NodeudldPortNeighborStats | |||
| 1.3.6.1.4.1.6486.801.1.2.1.44.1.1.8.1 | TablealaUdldPortNeighborStatsTable | not-accessible | current | UDLD port's PDU related statistics for a neighbor. |
| 1.3.6.1.4.1.6486.801.1.2.1.44.1.1.8.1.1 | RowalaUdldPortNeighborStatsEntry | not-accessible | current | A UDLD Statistics entry (per port, per neighbor). |
| 1.3.6.1.4.1.6486.801.1.2.1.44.1.1.8.1.1.1 | ColumnalaUdldPortNeighborStatsIfIndex | not-accessible | current | The ifindex of the port on which UDLD is running |
| 1.3.6.1.4.1.6486.801.1.2.1.44.1.1.8.1.1.2 | ColumnalaUdldNeighborIfIndex | not-accessible | current | The index of the neighbor to which the Statistics belong |
| 1.3.6.1.4.1.6486.801.1.2.1.44.1.1.8.1.1.3 | ColumnalaUdldNeighborName | read-only | current | The name of the neighbor |
| 1.3.6.1.4.1.6486.801.1.2.1.44.1.1.8.1.1.4 | ColumnalaUdldNumHelloRcvd | read-only | current | This object gives the number of hello messages recieved from the neighbor for this interface. |
| 1.3.6.1.4.1.6486.801.1.2.1.44.1.1.8.1.1.5 | ColumnalaUdldNumEchoRcvd | read-only | current | This object gives the number of echo messages received from the neighbor for this interface. |
| 1.3.6.1.4.1.6486.801.1.2.1.44.1.1.9 | ScalaralaUdldPrevState | accessible-for-notify | current | The previous UDLD state of the Port. |
| 1.3.6.1.4.1.6486.801.1.2.1.44.1.1.10 | ScalaralaUdldCurrentState | accessible-for-notify | current | The current UDLD state of the Port. |
| 1.3.6.1.4.1.6486.801.1.2.1.44.1.1.11 | ScalaralaUdldPortIfIndex | accessible-for-notify | current | The ifindex of the port on which UDLD trap is raised |
| 1.3.6.1.4.1.6486.801.1.2.1.44.1.2 | IdentityalcatelIND1UDLDMIBConformance | current | Branch for UDLD Module MIB Subsystem Conformance Information. | |
| 1.3.6.1.4.1.6486.801.1.2.1.44.1.2.1 | IdentityalcatelIND1UDLDMIBGroups | current | Branch for UDLD Module MIB Subsystem Units of Conformance. | |
| 1.3.6.1.4.1.6486.801.1.2.1.44.1.2.1.1 | GroupudldPortBaseGroup | current | Collection of objects for management of UDLD Base Group. | |
| 1.3.6.1.4.1.6486.801.1.2.1.44.1.2.1.2 | GroupudldPortConfigGroup | current | Collection of objects for management of UDLD Port Configuration Table. | |
| 1.3.6.1.4.1.6486.801.1.2.1.44.1.2.1.3 | GroupudldPortStatsGroup | current | Collection of objects for management of UDLD Port Statistics Table. | |
| 1.3.6.1.4.1.6486.801.1.2.1.44.1.2.1.4 | GroupudldPortNeighborStatsGroup | current | Collection of objects for management of UDLD Port Neighbor Statistics Table. | |
| 1.3.6.1.4.1.6486.801.1.2.1.44.1.2.1.5 | GroupudldPortTrapGroup | current | Collection of objects for UDLD Traps. | |
| 1.3.6.1.4.1.6486.801.1.2.1.44.1.2.2 | IdentityalcatelIND1UDLDMIBCompliances | current | Branch for UDLD Module MIB Subsystem Compliance Statements. | |
| 1.3.6.1.4.1.6486.801.1.2.1.44.1.2.2.1 | CompliancealcatelIND1UDLDMIBCompliance | current | Compliance statement for UDLD. | |
| 1.3.6.1.4.1.6486.801.1.2.1.44.1.3 | NodealaUdldEvents | |||
| 1.3.6.1.4.1.6486.801.1.2.1.44.1.3.0.1 | NotificationudldStateChange | current | The UDLD-state of port has changed. Notify the user by raising the Trap. Notify the Management Entity the previous UDLD-state and UDLD-Current. |