ALCATEL-IND1-AAA-MIB
114 objects
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line Authentication, Authorization, and Accounting (AAA) Subsystem. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
Imported Objects
| ALCATEL-IND1-BASE | softentIND1AAA |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | MacAddress RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6486.801.1.2.1.15.1 | IdentityalcatelIND1AAAMIB | This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey P… | ||
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1 | IdentityalcatelIND1AAAMIBObjects | current | Branch For Authentication, Authorization, and Accounting (AAA) Subsystem Managed Objects. | |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.1 | NodeaaaServerMIB | |||
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.1.1 | TableaaaServerTable | not-accessible | current | This table shows current configuration for each AAA server. |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.1.1.1 | RowaaaServerEntry | not-accessible | current | An AAA server configuration identified by its protocol and its index. An entry is created/removed when a server is defined or undefined with IOS configuration … |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.1.1.1.1 | ColumnaaasName | not-accessible | current | Name of the server. This name is given by the operator to refer the server. |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.1.1.1.2 | ColumnaaasProtocol | read-create | current | Protocol used with the server: radius(1) - RADIUS ldap(2) - LDAP ace(3) - ACE tacacs(4) - TACACS+ |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.1.1.1.3 | ColumnaaasHostName | read-create | current | DNS name of the server host. |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.1.1.1.4 | ColumnaaasIpAddress | read-create | current | IP address of the server host. |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.1.1.1.5 | ColumnaaasHostName2 | read-create | current | DNS name of the backup server host. |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.1.1.1.6 | ColumnaaasIpAddress2 | read-create | current | IP address of the backup server host. |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.1.1.1.7 | ColumnaaasRetries | read-create | current | Number of retries the switch makes to the server to authenticate a user before trying the next backup server. The default value is 3. |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.1.1.1.8 | ColumnaaasTimout | read-create | current | Time-out for server replies to authentication requests. The default value is 2. |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.1.1.1.9 | ColumnaaasRadKey | read-create | current | The shared secret is a string of characters known to the switch and to the RADIUS server, but it is not sent out over the network. The secret can be any text s… |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.1.1.1.10 | ColumnaaasRadAuthPort | read-create | current | For RADIUS server only. Port number for authentication request; the host is not used for authentication if set to 0. The default value is 1645. |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.1.1.1.11 | ColumnaaasRadAcctPort | read-create | current | For RADIUS server only. Port number for accounting request; the host is not used for authentication if set to 0. The default value is 1646. |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.1.1.1.12 | ColumnaaasLdapPort | read-create | current | For LDAP server only. Port number for LDAP server host. |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.1.1.1.13 | ColumnaaasLdapDn | read-create | current | For LDAP server only. the super user dn, i.e., the administrative distinguished name recognized by the LDAP-enabled directory servers (e.g., cn=manager) |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.1.1.1.14 | ColumnaaasLdapPasswd | read-create | current | For LDAP server only. the super user password, i.e., the administrative password recognized by LDAP-enabled directory servers (e.g., secret). The secret is sto… |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.1.1.1.15 | ColumnaaasLdapSearchBase | read-create | current | For LDAP server only. Search base recognized by LDAP-enabled directory servers (e.g.,o=company, c=US). |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.1.1.1.16 | ColumnaaasLdapServType | read-create | current | For LDAP server only. Directory server type used in LDAP Authentication: ns(0) - non significant value generic(1) - Generic Schema netscape(2) - Netscape Direc… |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.1.1.1.17 | ColumnaaasLdapEnableSsl | read-create | current | Only for LDAP server. Specify if the connection between the swtich and the LDAP server use a SSL session. |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.1.1.1.18 | ColumnaaasRowStatus | read-create | current | The status of this table entry. |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.1.1.1.19 | ColumnaaasTacacsKey | read-create | current | The shared secret is a string of characters known to the switch and to the TACACS+ server, but it is not sent out over the network. The secret can be any text … |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.1.1.1.20 | ColumnaaasTacacsPort | read-create | current | For TACACS+ server only. Port number for LDAP server host. |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.1.1.1.21 | ColumnaaasVrfName | read-create | current | Name of the VRF that the server is on. This VRF name is valid only when the server type is RADIUS. (aaasProtocol = 1 (Radius). |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.1.1.1.22 | ColumnaaasRadKeyHash | read-create | current | The encrypted version of the aaasRadKey attribute. |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.1.1.1.23 | ColumnaaasLdapPasswdHash | read-create | current | The encrypted version of the aaasLdapPasswd attribute. |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.1.1.1.24 | ColumnaaasTacacsKeyHash | read-create | current | The encrypted version of the aaasTacacsKey attribute. |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2 | NodeaaaAuthAcctMIB | |||
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.1 | TableaaaAuthSATable | not-accessible | current | This table allow to display and modify the configuration of the authentication servers for the switch accesses. |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.1.1 | RowaaaAuthSAEntry | not-accessible | current | A switch access authentication entry is specified by the type of access. |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.1.1.1 | ColumnaaatsInterface | not-accessible | current | Type of connection that must be authenticated default(1) -define the default authentication method for console, telnet, ftp, snmp , http and ssh. If the operat… |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.1.1.2 | ColumnaaatsName1 | read-create | current | Name of the server. Special value 'local' correspond to the local database. Other name correspond to an index value of the aaaServerTable snmp entry can only u… |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.1.1.3 | ColumnaaatsName2 | read-create | current | Name of a server used if the precedent is not accessible. Special value 'local' correspond to the local database. Other name correspond to an index value of th… |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.1.1.4 | ColumnaaatsName3 | read-create | current | Name of a server used if the precedent is not accessible. Special value 'local' correspond to the local database. Other name correspond to an index value of th… |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.1.1.5 | ColumnaaatsName4 | read-create | current | Name of a server used if the precedent is not accessible. Special value 'local' correspond to the local database. Other name correspond to an index value of th… |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.1.1.7 | ColumnaaatsRowStatus | read-create | current | The status of this table entry. |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.1.1.8 | ColumnaaatsCertificate | read-create | current | use of x509 user certificate during the HTTPs session establisment. noCertificate(0)- no user certificate is required, certificateOnly(1) - the DN from the cer… |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.2 | TableaaaAcctSATable | not-accessible | current | This table shows current configuration for Switch access accounting. |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.2.1 | RowaaaAcctSAEntry | not-accessible | current | Accounting configuration for switch access. |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.2.1.1 | ColumnaaacsInterface | not-accessible | current | For now, accounting for console, telnet, ftp, http, snmp, ssh are stored in the same set of servers, the index is always (1). |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.2.1.2 | ColumnaaacsName1 | read-create | current | Name of the server. Special value 'local' correspond to the local log. Other name correspond to an index value of the aaaServerTable An Ace server can not be u… |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.2.1.3 | ColumnaaacsName2 | read-create | current | Name of a server used if the precedent is not accessible. Special value 'local' correspond to the local log. Other name correspond to an index value of the aaa… |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.2.1.4 | ColumnaaacsName3 | read-create | current | Name of a server used if the precedent is not accessible. Special value 'local' correspond to the local log. Other name correspond to an index value of the aaa… |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.2.1.5 | ColumnaaacsName4 | read-create | current | Name of a server used if the precedent is not accessible. Special value 'local' correspond to the local log. Other name correspond to an index value of the aaa… |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.2.1.6 | ColumnaaacsRowStatus | read-create | current | The status of this table entry. |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.3 | TableaaaAcctCmdTable | not-accessible | current | This table stores the commands that will be logged during an accounting session. This feature is valid only for Tacacs+ accounting |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.3.1 | RowaaaAcctCmdEntry | not-accessible | current | Tacacs+ Accounting configuration for executed commands. |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.3.1.1 | ColumnaaacmdInterface | not-accessible | current | For now, accounting for console, telnet, ftp, http, snmp, ssh are stored in the same set of servers, the index is always (1). |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.3.1.2 | ColumnaaacmdSrvName1 | read-create | current | Name of the Tacacs+ server. Other name correspond to an index value of the aaaServerTable |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.3.1.3 | ColumnaaacmdSrvName2 | read-create | current | Name of the Tacacs+ server used if the precedent is not accessible. Other name correspond to an index value of the aaaServerTable |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.3.1.4 | ColumnaaacmdSrvName3 | read-create | current | Name of the Tacacs+ server used if the precedent is not accessible. Other name correspond to an index value of the aaaServerTable |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.3.1.5 | ColumnaaacmdSrvName4 | read-create | current | Name of the Tacacs+ server used if the precedent is not accessible. Other name correspond to an index value of the aaaServerTable |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.3.1.6 | ColumnaaacmdRowStatus | read-create | current | The status of this table entry. |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.4 | TableaaaAuthDATable | not-accessible | current | This table shows current configuration for MAC/802.1X authentication. |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.4.1 | RowaaaAuthDAEntry | not-accessible | current | configuration for MAC/802.1X authentication. |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.4.1.1 | ColumnaaadaInterface | read-only | current | one for mac, two for 1x. |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.4.1.2 | ColumnaaadaName1 | read-create | current | Name of the server. It corresponds to an index value of the aaaServerTable Only RADIUS server can be used in front hand. |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.4.1.3 | ColumnaaadaName2 | read-create | current | Name of the server. It corresponds to an index value of the aaaServerTable Only RADIUS server can be used in front hand. |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.4.1.4 | ColumnaaadaName3 | read-create | current | Name of the server. It corresponds to an index value of the aaaServerTable Only RADIUS server can be used in front hand. |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.4.1.5 | ColumnaaadaName4 | read-create | current | Name of the server. It corresponds to an index value of the aaaServerTable Only RADIUS server can be used in front hand. |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.4.1.6 | ColumnaaadaRowStatus | read-create | current | The status of this table entry. |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.5 | TableaaaAcctDATable | not-accessible | current | This table shows current configuration for device access accounting. |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.5.1 | RowaaaAcctDAEntry | not-accessible | current | Accounting configuration for device access. |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.5.1.1 | ColumnaaacdInterface | not-accessible | current | For now, accounting for mac and 1x are stored in the same set of servers, the index is always (1). |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.5.1.2 | ColumnaaacdName1 | read-create | current | Name of the server. Special value 'local' correspond to the local log. Other name correspond to an index value of the aaaServerTable for accounting. |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.5.1.3 | ColumnaaacdName2 | read-create | current | Name of a server used if the precedent is not accessible. Special value 'local' correspond to the local log. Other name correspond to an index value of the aaa… |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.5.1.4 | ColumnaaacdName3 | read-create | current | Name of a server used if the precedent is not accessible. Special value 'local' correspond to the local log. Other name correspond to an index value of the aaa… |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.5.1.5 | ColumnaaacdName4 | read-create | current | Name of a server used if the precedent is not accessible. Special value 'local' correspond to the local log. Other name correspond to an index value of the aaa… |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.2.5.1.6 | ColumnaaacdRowStatus | read-create | current | The status of this table entry. |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.3 | NodeaaaUserMIB | |||
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.3.1 | TableaaaUserTable | not-accessible | current | This table shows current configuration for the local user database. |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.3.1.1 | RowaaaUserEntry | not-accessible | current | An user configuration identified by its user name. |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.3.1.1.1 | ColumnaaauUserName | not-accessible | current | Name of the user. |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.3.1.1.2 | ColumnaaauPassword | read-create | current | Password of the user. For get response the password in encoded in a one way method. This makes the password readable by noone. |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.3.1.1.3 | ColumnaaauReadRight1 | read-create | current | Specifies the families that the user can execute with read right. Each bit of the 32-bit integer mask represents a command's family number. When the family bit… |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.3.1.1.4 | ColumnaaauReadRight2 | read-create | current | Specifies the families that the user can execute with read right. Each bit of the 32-bit integer mask represents a command's family number. When the family bit… |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.3.1.1.5 | ColumnaaauWriteRight1 | read-create | current | Specifies the families that the user can execute with write right. Each bit of the 32-bit integer mask represents a command's family number. When the family bi… |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.3.1.1.6 | ColumnaaauWriteRight2 | read-create | current | Specifies the families that the user can execute with write right. Each bit of the 32-bit integer mask represents a command's family number. When the family bi… |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.3.1.1.7 | ColumnaaauSnmpLevel | read-create | current | Specifies if the user is authorized to use SNMP and if yes its security level. no(1) - Not authorized to use SNMP. noauth(2) - SNMPv1,SNMPv2c or SNMPv3 without… |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.3.1.1.8 | ColumnaaauSnmpAuthKey | read-only | current | Authentication key of the user. The key is encoded in a two way method. The encryption key is deducted from this key. |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.3.1.1.9 | ColumnaaauRowStatus | read-create | current | The status of this table entry. |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.3.1.1.10 | ColumnaaauOldPassword | read-create | current | Internal use |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.3.1.1.11 | ColumnaaauPasswordExpirationDate | read-create | current | The local time of when the password would be expired. This date will be reset once the value of aaaAsaDefaultPasswordExpirationInDays is updated. Only the foll… |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.3.1.1.12 | ColumnaaauPasswordExpirationInMinute | read-create | current | Number of minutes from now till the password expiration time. Setting this object will update aaauPasswordExpirationDate. If -1, password will not be expired. … |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.3.1.1.13 | ColumnaaauPasswordAllowModifyDate | read-only | current | The local time of when the password can be start to be modified. This date will be reset once the value of aaauPasswordAllowModifyDate is updated. Only the fol… |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.3.1.1.14 | ColumnaaauPasswordLockoutEnable | read-create | current | Indicate whether this account is locked out. |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.3.1.1.15 | ColumnaaauBadAtempts | read-only | current | Number bad password attempts in the observation window. |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.3.1.1.16 | ColumnaaauReadRight3 | read-create | current | Specifies the families that the user can execute with read right. Each bit of the 32-bit integer mask represents a command's family number. When the family bit… |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.3.1.1.17 | ColumnaaauReadRight4 | read-create | current | Specifies the families that the user can execute with read right. Each bit of the 32-bit integer mask represents a command's family number. When the family bit… |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.3.1.1.18 | ColumnaaauWriteRight3 | read-create | current | Specifies the families that the user can execute with write right. Each bit of the 32-bit integer mask represents a command's family number. When the family bi… |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.3.1.1.19 | ColumnaaauWriteRight4 | read-create | current | Specifies the families that the user can execute with write right. Each bit of the 32-bit integer mask represents a command's family number. When the family bi… |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.4 | NodeaaaAsaConfig | |||
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.4.1 | ScalaraaaAsaPasswordSizeMin | read-write | current | Minimum number of digits of the passwords ( nominator aaauPassword). |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.4.2 | ScalaraaaAsaDefaultPasswordExpirationInDays | read-write | current | Default password expiration time in days to be applied to all users. Updating this object will reset aaauPasswordExpirationDate. Password expiration will not b… |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.4.3 | ScalaraaaAsaPasswordContainUserName | read-write | current | Indicate whether check password contains username or not. |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.4.4 | ScalaraaaAsaPasswordMinUpperCase | read-write | current | Minimum number of English uppercase characters required for password. 0 is disable |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.4.5 | ScalaraaaAsaPasswordMinLowerCase | read-write | current | Minimum number of English lowercase characters required for password 0 is disable. |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.4.6 | ScalaraaaAsaPasswordMinDigit | read-write | current | Minimum number of base-10 digits required for password. 0 is disable |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.4.7 | ScalaraaaAsaPasswordMinNonAlphan | read-write | current | Minimum number of non-alphanumeric required for password. 0 is disable |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.4.8 | ScalaraaaAsaPasswordHistory | read-write | current | Password history feature will prevent users from repeatedly using the same password. 0 is disable |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.4.9 | ScalaraaaAsaPasswordMinAge | read-write | current | The password can't be modified in these days. 0 is disable |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.4.10 | ScalaraaaAsaLockoutWindow | read-write | current | The window of time in which the system increments the bad logon count.(minutes) 0 is disable |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.4.11 | ScalaraaaAsaLockoutDuration | read-write | current | The amount of time that an account is locked due to the aaauLockoutThreshold being exceeded.(minutes) 0 is disable |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.4.12 | ScalaraaaAsaLockoutThreshold | read-write | current | The number of invalid logon attempts that are permitted before the account is locked out. 0 is disable |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.1.4.13 | ScalaraaaAsaAccessPolicyAdminConsoleOnly | read-write | current | Enable or disable AdminUser console only restriction |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.2 | IdentityalcatelIND1AAAMIBConformance | current | Branch For Authentication, Authorization, and Accounting (AAA) Subsystem Conformance Information. | |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.2.1 | IdentityalcatelIND1AAAMIBGroups | current | Branch For Authentication, Authorization, and Accounting (AAA) Subsystem Units Of Conformance. | |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.2.1.1 | GroupaaaServerMIBGroup | current | Collection of objects for management of AAA Server. | |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.2.1.2 | GroupaaaAuthAcctGroup | current | Collection of objects for management of AAA Authentication Accounting. | |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.2.1.3 | GroupaaaUserMIBGroup | current | Collection of objects for management of AAA User Local Database. | |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.2.2 | IdentityalcatelIND1AAAMIBCompliances | current | Branch For Authentication, Authorization, and Accounting (AAA) Subsystem Compliance Statements. | |
| 1.3.6.1.4.1.6486.801.1.2.1.15.1.2.2.1 | CompliancealcatelIND1AAAMIBCompliance | current | Compliance statement for Authentication, Authorization, and Accounting (AAA) Subsystem. |