ALCATEL-IND1-BGP-MIB
435 objects
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line Configuration Of Global BGP Configuration Parameters. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
Imported Objects
| ALCATEL-IND1-BASE | routingIND1Bgp |
| IPV6-TC | Ipv6Address |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 IpAddress MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1 | IdentityalcatelIND1BGPMIB | This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey P… | ||
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1 | IdentityalcatelIND1BGPMIBObjects | current | Branch For Border Gateway Protocol (BGP) Subsystem Managed Objects. | |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.1 | NodealaBgpGlobal | |||
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.1.1 | ScalaralaBgpProtoStatus | read-write | current | Enable/Disable BGP protocol |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.1.2 | ScalaralaBgpAutonomousSystemNumber | read-write | current | Autonomous System Number. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.1.3 | ScalaralaBgpRouterId | read-only | current | Configured BGP router ID. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.1.4 | ScalaralaBgpIgpSynchStatus | read-write | current | Enable/Disable BGP IGP Synchronization. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.1.5 | ScalaralaBgpMedAlways | read-write | current | Enable/Disable BGP Metric MULTI_EXIT_DISC comparison between routes from different Autonomous Systems. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.1.6 | ScalaralaBgpDefaultLocalPref | read-write | current | The default LOCAL_PREF to be applied to routes learnt from neighbouring autonomous system. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.1.7 | ScalaralaBgpMissingMed | read-write | current | Specifies how to a missing med in a path attribute. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.1.8 | ScalaralaBgpManualTag | read-only | current | Manual tag to be used. A value of 0 means no manual tagging. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.1.9 | ScalaralaBgpPromiscuousNeighbours | read-write | deprecated | Enable/Disable BGP to accept connections from neighbours that are not configured. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.1.10 | ScalaralaBgpConfedId | read-write | current | Confederation identifier. A value of 0 means this local speaker is not a member of any confederation |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.1.11 | ScalaralaBgpDampening | read-write | current | Enable/Disable BGP route dampening |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.1.12 | ScalaralaBgpDampHalfLifeReach | not-accessible | deprecated | The time in seconds in which the penalty to a flapping route decreases to half its initial value while the route remains reachable. Obsoleted by the variable a… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.1.13 | ScalaralaBgpDampHalfLifeUnReach | not-accessible | deprecated | The time in seconds in which the penalty to a flapping route decreases to half its initial value while the route remains unreachable. Obsoleted by the variable… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.1.14 | ScalaralaBgpDampMaxFlapHistory | read-write | current | The time in seconds the flap history of a route is retained. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.1.15 | ScalaralaBgpDebugLevel | read-write | deprecated | This object has been deprecated in favour of alaDrcTmBgpDebug Configuration. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.1.16 | ScalaralaBgpFastExternalFailOver | read-write | current | Enable/Disable Resetting session immediately if a link to a directly connected external peer is operationally down. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.1.17 | ScalaralaBgpPeerChanges | read-write | current | Enable/Disable logging of peer state changes to the syslog. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.1.18 | ScalaralaBgpVersion | read-only | current | The BGP Version in use. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.1.19 | ScalaralaBgpProtoOperState | read-only | current | The BGP protocol operational state. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.1.20 | ScalaralaBgpMaxPeers | read-only | current | Maximum BGP peers supported. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.1.21 | ScalaralaBgpNumActiveRoutes | read-only | current | The number of active known routes in the BGP routing table |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.1.22 | ScalaralaBgpNumEstabExternalPeers | read-only | current | The number of External Peers that are in ESTABLISHED state. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.1.23 | ScalaralaBgpNumEstabInternalPeers | read-only | current | The number of Internal Peers that are in ESTABLISHED state. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.1.24 | ScalaralaBgpNumPaths | read-only | current | The total number of paths known to the system. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.1.25 | ScalaralaBgpNumFeasiblePaths | read-only | current | The total number of feasible paths known to the system. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.1.26 | ScalaralaBgpNumDampenedPaths | read-only | current | The total number of dampened paths known to the system. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.1.27 | ScalaralaBgpNumIgpSyncWaitPaths | read-only | current | The total number of paths learnt from internal peers that are waiting to be synchronized with IGP. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.1.28 | ScalaralaBgpNumPolicyChgPaths | read-only | current | The total number of paths that are currently rejected but stored anticipating an inbound policy change for an external peer which is configured to accept dynam… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.1.29 | ScalaralaBgpMultiPath | read-write | current | Enable/Disable Equal-Cost MultiPaths |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.1.30 | ScalaralaBgpRouteReflection | read-write | current | Enable/Disable Route reflection |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.1.31 | ScalaralaBgpClusterId | read-write | current | The local cluster id of this route reflection cluster. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.1.32 | ScalaralaBgpDampeningClear | read-write | current | Writing a value of clear into this variable will clear the dampening history. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.1.33 | ScalaralaBgpDampCutOff | read-write | current | When a route's figure of merit reaches this value, the route is considered damped. This is a floating point value with 2 digit precision. For example, a value … |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.1.34 | ScalaralaBgpDampReuse | read-write | current | When a route's figure of merit decays to this value, the route can be reused. This is a floating point value with 2 digit precision. For example, a value of 3.… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.1.35 | ScalaralaBgpDampCeil | read-only | current | The maximum value that the figure of merit of a route can attain. This is a floating point value with 2 digit precision. For example, a value of 3.5 is encoded… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.1.36 | ScalaralaBgpAspathCompare | read-write | current | Specifies whether to include aspath comparison in route selection. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.1.37 | ScalaralaBgpAsOriginInterval | read-write | current | The minimum interval in seconds between successive updates advertising the networks belonging to the local autonomous system. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.1.38 | ScalaralaBgpDampHalfLife | read-write | current | The time in seconds in which the penalty to a flapping route decreases to half its initial value. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.1.39 | ScalaralaBgpGracefulRestart | read-write | current | Enables BGP graceful restart capability. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.1.40 | ScalaralaBgpRestartInterval | read-write | current | Determines how long, in seconds, peering BGP routers are told to wait for this router to complete graceful restart and re-establish peering session. It is reco… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.1.41 | ScalaralaBgpRestartStatus | read-only | current | Indicates whether the router is currently performing a graceful restart. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.1.42 | ScalaralaBgpMultiProtocolIpv4 | read-write | current | Indicates whether IPv4 BGP4 capability is enabled. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.1.43 | ScalaralaBgpMultiProtocolIpv6 | read-write | current | Indicates whether IPv6 BGP4 capability is enabled. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.1.44 | ScalaralaBgpBfdStatus | read-write | current | Enables/Disables BFd for BGP protocol. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.1.45 | ScalaralaBgpBfdAllNeighborStatus | read-write | current | Enables/Disables BFd for all BGP Neighbors. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2 | TablealaBgpPeerTable | not-accessible | current | BGP IPv4 peer table. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1 | RowalaBgpPeerEntry | not-accessible | current | BGP IPv4 Peer configuration entry. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.1 | ColumnalaBgpPeerAddr | read-only | current | Ip Address of the peer. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.2 | ColumnalaBgpPeerAS | read-create | current | Autonomous system of the peer. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.3 | ColumnalaBgpPeerPassive | read-create | current | Enable/Disable the peer passive status. If enabled the peer will not initiate a transport connection. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.4 | ColumnalaBgpPeerName | read-create | current | A symbolic name for the neighbour. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.5 | ColumnalaBgpPeerMultiHop | read-create | current | If enabled the external peer is allowed to be multiple hops away. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.6 | ColumnalaBgpPeerMaxPrefix | read-create | current | The maximum prefixes to be accepted from this peer. If this maximum is reached, the peer will be sent a NOTIFY message with a CEASE ecode. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.7 | ColumnalaBgpPeerMaxPrefixWarnOnly | read-create | current | If enabled, the operator will be warned when the peer reaches 80% of the configured maximum prefixes. To see this message, BGP debug for type 'warnings' must b… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.8 | ColumnalaBgpPeerNextHopSelf | read-create | current | If enabled, nexthop processing in the updates sent to this peer is disabled and is set to the ip address of the interface attached to this peer. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.9 | ColumnalaBgpPeerSoftReconfig | read-create | current | Enable/Disable dynamic policy configurability on the connection to this peer. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.10 | ColumnalaBgpPeerInSoftReset | read-only | current | Route refresh capability is Enabled/Disabled on the connection to this peer. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.11 | ColumnalaBgpPeerIpv4Unicast | read-only | current | Multiprotocol capability IPv4 Unicast is Enabled/Disabled on the connection to this peer . |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.12 | ColumnalaBgpPeerIpv4Multicast | read-only | current | Multiprotocol capability IPv4 Multicast is Enabled/Disabled on the connection to this peer . |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.13 | ColumnalaBgpPeerRcvdRtRefreshMsgs | read-only | current | The number of route refresh messages received from this peer. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.14 | ColumnalaBgpPeerSentRtRefreshMsgs | read-only | current | The number of route refresh messages sent to this peer. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.15 | ColumnalaBgpPeerRouteMapOut | read-create | current | The name of the policy map to be applied to the updates sent to this peer. This is same as alaBgpPolicyRouteMapName. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.16 | ColumnalaBgpPeerRouteMapIn | read-create | current | The name of the policy map to be applied to the updates received from this peer. This is same as alaBgpPolicyRouteMapName. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.17 | ColumnalaBgpPeerLocalAddr | read-create | current | Local Ip Address of this connection. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.18 | ColumnalaBgpPeerLastDownReason | read-only | current | The general reason for termination of last established session with the peer since the protocol was operationally up. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.19 | ColumnalaBgpPeerLastDownTime | read-only | current | The time elapsed since the BGP session with the peer was terminated. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.20 | ColumnalaBgpPeerLastReadTime | read-only | current | The time elapsed since we last read data from the peer. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.21 | ColumnalaBgpPeerRcvdNotifyMsgs | read-only | current | The Number of notification messages received from this peer. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.22 | ColumnalaBgpPeerSentNotifyMsgs | read-only | current | The Number of notification messages sent to this peer. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.23 | ColumnalaBgpPeerLastSentNotifyReason | read-only | current | The last notification reason sent. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.24 | ColumnalaBgpPeerLastRecvNotifyReason | read-only | current | The last notification reason received. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.25 | ColumnalaBgpPeerRcvdPrefixes | read-only | current | The Number of prefixes received from this peer. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.26 | ColumnalaBgpPeerDownTransitions | read-only | current | The Number of times this peer session transitioned to IDLE state. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.27 | ColumnalaBgpPeerType | read-only | current | This indicates whether the peer belongs to the local autonomous system(internal) or another autonmous system. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.28 | ColumnalaBgpPeerClearCounter | read-create | current | Setting a value of clear into this variable will clear the per peer statistics. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.29 | ColumnalaBgpPeerAutoReStart | read-create | current | Enable/Disable the peer autostart status. If enabled, the peer will be automatically restarted (if administratively enabled) after the transition to IDLE state. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.30 | ColumnalaBgpPeerClientStatus | read-create | current | If enabled this peer is a route reflection client. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.31 | ColumnalaBgpPeerConfedStatus | read-create | current | If enabled this peer is a member of our confederation. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.32 | ColumnalaBgpPeerRemovePrivateAs | read-create | current | If enabled private as numbers are stripped out in the updates sent to this peer. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.33 | ColumnalaBgpPeerTTL | read-create | current | TTL count for packets on this TCP connection. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.34 | ColumnalaBgpPeerAspathListOut | read-create | current | The name of the aspath-list to be applied to the updates sent to this peer. This is same as alaBgpAspathMatchListId. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.35 | ColumnalaBgpPeerAspathListIn | read-create | current | The name of the aspath-list to be applied to the updates received from this peer. This is same as alaBgpAspathMatchListId. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.36 | ColumnalaBgpPeerPrefixListOut | read-create | current | The name of the prefix-list to be applied to the updates sent to this peer. This is same as alaBgpPrefixMatchListId. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.37 | ColumnalaBgpPeerPrefixListIn | read-create | current | The name of the prefix-list to be applied to the updates received from this peer. This is same as alaBgpPrefixMatchListId. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.38 | ColumnalaBgpPeerCommunityListOut | read-create | current | The name of the community-list to be applied to the updates sent to this peer. This is same as alaBgpCommunityMatchListId. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.39 | ColumnalaBgpPeerCommunityListIn | read-create | current | The name of the community-list to be applied to the updates received from this peer. This is same as alaBgpCommunityMatchListId. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.40 | ColumnalaBgpPeerRestart | read-create | current | Setting a value of restart into this variable will restart the peer. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.41 | ColumnalaBgpPeerDefaultOriginate | read-create | current | If enabled a default route is sent to this neighbour. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.42 | ColumnalaBgpPeerReconfigureInBound | read-create | current | Setting a value of reconfigure into this variable will re-start inbound policy evaluation of the peer. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.43 | ColumnalaBgpPeerReconfigureOutBound | read-create | current | Setting a value of reconfigure into this variable will re-start outbound policy evaluation of the peer. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.44 | ColumnalaBgpPeerMD5Key | read-create | current | Value of the MD5 key used in TCP connection with the peer. This field is secured and returned value is non significant. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.45 | ColumnalaBgpPeerMD5KeyEncrypt | read-only | current | Value of the MD5 key encrypted using 3DES algorithm. It is calculated from MD5 key value, and is used only to restore configuration on reboot. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.46 | ColumnalaBgpPeerRowStatus | read-create | current | Row status variable. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.47 | ColumnalaBgpPeerUpTransitions | read-only | current | The Number of times this peer session transitioned to ESTABLISHED state. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.48 | ColumnalaBgpPeerLastWriteTime | read-only | current | The time elapsed since we last sent data to the peer. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.49 | ColumnalaBgpPeerRcvdMsgs | read-only | current | The Number of messages received from the peer. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.50 | ColumnalaBgpPeerSentMsgs | read-only | current | The Number of messages sent to the peer. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.51 | ColumnalaBgpPeerRcvdUpdMsgs | read-only | current | The Number of update messages received from the peer. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.52 | ColumnalaBgpPeerSentUpdMsgs | read-only | current | The Number of update messages sent to the peer. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.53 | ColumnalaBgpPeerLastTransitionTime | read-only | current | The time elapsed since the BGP session was operationally up or down to the peer. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.54 | ColumnalaBgpPeerLastUpTime | read-only | current | The time elapsed since the BGP session with the peer was established. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.55 | ColumnalaBgpPeerBgpId | read-only | current | BGP Identifier of the peer. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.56 | ColumnalaBgpPeerLocalIntfName | read-only | current | The user defined name used to identify the local IP interface for this peer's TCP connection. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.57 | ColumnalaBgpPeerRestartTime | read-only | current | The graceful restart time interval advertised by this peer. A value of 0 indicates that this peer is not capable of graceful restart, and has not advertised th… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.58 | ColumnalaBgpPeerRestartState | read-only | current | Indicates whether the peer is currently performing a graceful restart. A value of none indicates that this peer is not capable of graceful restart. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.59 | ColumnalaBgpPeerRestartFwdState | read-only | current | Indicates whether the peer has preserved the forwarding state during the graceful restart. This value is defined only for a peer that has advertised graceful r… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.60 | ColumnalaBgpPeerIpv6Unicast | read-only | current | Indicates whether the peer has advertised Multiprotocol IPv6 Unicast capability in its BGP OPEN message. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.61 | ColumnalaBgpPeerIpv6NextHop | read-create | current | The IPv6 nexthop for IPv6 routes advertised to this peer. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.62 | ColumnalaBgpPeerLocalPort | read-only | current | The local port number for this peer's TCP connection. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.63 | ColumnalaBgpPeerTcpWindowSize | read-only | current | The size of the socket buffers, in bytes, used for this TCP connection. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.64 | ColumnalaBgpPeerActivateIpv6 | read-create | current | If enabled, the Multiprotocol IPv6 Unicast capability is advertised to this peer. If disabled, the capability is not advertised in the OPEN message. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.65 | ColumnalaBgpPeerBfdStatus | read-create | current | Enables/Disables BFd for a particular Peer. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.66 | ColumnalaBgpPeerPrefix6ListOut | read-create | current | The name of the prefix6-list to be applied to the updates sent to this peer. This is same as alaBgpPrefix6MatchListId. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.2.1.67 | ColumnalaBgpPeerPrefix6ListIn | read-create | current | The name of the prefix6-list to be applied to the updates received from this peer. This is same as alaBgpPrefix6MatchListId. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.3 | TablealaBgpAggrTable | not-accessible | current | BGP Aggregate configuration table. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.3.1 | RowalaBgpAggrEntry | not-accessible | current | BGP Aggregation entry. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.3.1.1 | ColumnalaBgpAggrAddr | read-only | current | Aggregate address. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.3.1.2 | ColumnalaBgpAggrMask | read-only | current | Aggregate Mask. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.3.1.3 | ColumnalaBgpAggrSummarize | read-create | current | If enabled only aggregate is advertised. Otherwise more specific routes are also advertised. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.3.1.4 | ColumnalaBgpAggrSet | read-create | current | If enabled aggregate all aspaths. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.3.1.5 | ColumnalaBgpAggrState | read-only | current | if active the aggregate is actively being advertised. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.3.1.6 | ColumnalaBgpAggrMetric | read-create | current | This specifies the MED to be used when advertising this aggregate to external peers. A value of 0 indicates not to send MED. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.3.1.7 | ColumnalaBgpAggrLocalPref | read-create | current | This specifies the override default LOCAL PREF to be used when advertising this aggregate to internal peers. A value of 0 indicates not to override the default. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.3.1.8 | ColumnalaBgpAggrCommunity | read-create | current | The value to set the COMMUNITY attribute when advertising this aggregate. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.3.1.9 | ColumnalaBgpAggrRowStatus | read-create | current | Row status variable. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.4 | TablealaBgpNetworkTable | not-accessible | current | BGP Network configuration table. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.4.1 | RowalaBgpNetworkEntry | not-accessible | current | BGP Network entry. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.4.1.1 | ColumnalaBgpNetworkAddr | read-only | current | Aggregate address. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.4.1.2 | ColumnalaBgpNetworkMask | read-only | current | Aggregate Mask. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.4.1.3 | ColumnalaBgpNetworkState | read-only | current | Indicates whether the network is being actively advertised or not. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.4.1.4 | ColumnalaBgpNetworkMetric | read-create | current | This specifies the MED to be used when advertising this network to external peers. A value of 0 indicates not to send MED. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.4.1.5 | ColumnalaBgpNetworkLocalPref | read-create | current | This specifies the override default LOCAL PREF to be used when advertising this network to internal peers. A value of 0 indicates not to override the default. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.4.1.6 | ColumnalaBgpNetworkCommunity | read-create | current | The value to set the COMMUNITY attribute when advertising this network. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.4.1.7 | ColumnalaBgpNetworkRowStatus | read-create | current | Row status variable. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.5 | TablealaBgpRouteTable | not-accessible | current | BGP Routing table. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.5.1 | RowalaBgpRouteEntry | not-accessible | current | BGP Route entry. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.5.1.1 | ColumnalaBgpRouteAddr | read-only | current | Destination address. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.5.1.2 | ColumnalaBgpRouteMask | read-only | current | Destination Mask. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.5.1.3 | ColumnalaBgpRouteState | read-only | current | Indicates whether the route is being actively advertised or not. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.5.1.4 | ColumnalaBgpRoutePaths | read-only | current | Number of total paths available to this destination. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.5.1.5 | ColumnalaBgpRouteFeasiblePaths | read-only | current | Number of Feasible paths available to this destination. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.5.1.6 | ColumnalaBgpRouteNextHop | read-only | current | The BGP Nexthop to reach this destination. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.5.1.7 | ColumnalaBgpRouteIgpNextHop | read-only | current | The IGP Nexthop to reach this destination. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.5.1.8 | ColumnalaBgpRouteIsHidden | read-only | current | Indicates whether the route is hidden by an aggregate. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.5.1.9 | ColumnalaBgpRouteIsAggregate | read-only | current | Indicates whether the route is an aggregate. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.5.1.10 | ColumnalaBgpRouteIsAggregateContributor | read-only | current | Indicates whether the route is a contributor to an aggregate. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.5.1.11 | ColumnalaBgpRouteAdvNeighbors | read-only | current | List of (addresses of) neighbours to whom this route has been advertised is encoded here. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.5.1.12 | ColumnalaBgpRouteIsAggregateList | read-only | current | Indicates whether the route is on an aggregate list. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.5.1.13 | ColumnalaBgpRouteIsAggregateWait | read-only | current | Indicates whether the route is an aggregate waiting for a contributor. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.5.1.14 | ColumnalaBgpRouteIsOnEbgpChgList | read-only | current | Indicates whether the route is placed on list of EBGP routes. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.5.1.15 | ColumnalaBgpRouteIsOnIbgpClientChgList | read-only | current | Indicates whether the route is placed on list of IBGP reflector-client routes. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.5.1.16 | ColumnalaBgpRouteIsOnIbgpChgList | read-only | current | Indicates whether the route is placed on list of IBGP non-reflector-client routes. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.5.1.17 | ColumnalaBgpRouteIsOnLocalChgList | read-only | current | Indicates whether the route is placed on list of local routes. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.5.1.18 | ColumnalaBgpRouteIsOnDeleteList | read-only | current | Indicates whether the route is placed on delete list. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.5.1.19 | ColumnalaBgpRouteIsDampened | read-only | current | Indicates whether the route is being route flap dampened. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.6 | TablealaBgpPathTable | not-accessible | current | BGP Path table. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.6.1 | RowalaBgpPathEntry | not-accessible | current | BGP path entry. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.6.1.1 | ColumnalaBgpPathAddr | read-only | current | Destination address. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.6.1.2 | ColumnalaBgpPathMask | read-only | current | Destination Mask. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.6.1.3 | ColumnalaBgpPathPeerAddr | read-only | current | The IP address or the BGP Identifier of the peer who sent this path. For locally sourced routes, the value is 0.0.0.0. For peers with an IPv4 address, the valu… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.6.1.4 | ColumnalaBgpPathSrcProto | read-only | current | The protocol from which the path was learnt. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.6.1.5 | ColumnalaBgpPathWeight | read-only | current | The weight assigned to this path. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.6.1.6 | ColumnalaBgpPathPref | read-only | current | The degree of preference assigned to this path. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.6.1.7 | ColumnalaBgpPathState | read-only | current | Indicates the state of the path. When path state is none it indicates that there are no paths to this prefix/len and the route is being purged from the system.… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.6.1.8 | ColumnalaBgpPathOrigin | read-only | current | The ORIGIN attribute of the path. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.6.1.9 | ColumnalaBgpPathNextHop | read-only | current | The NEXTHOP attribute of the path. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.6.1.10 | ColumnalaBgpPathAs | read-only | current | The sequence of AS path segments. Each AS path segment is represented by a triple <TYPE, LENGTH, VALUE>. The TYPE is a 1-octet field which has two possible val… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.6.1.11 | ColumnalaBgpPathLocalPref | read-only | current | The LOCAL_PREF attribute of the path. A value of -1 indicates the absence of this attribute. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.6.1.12 | ColumnalaBgpPathMed | read-only | current | The Multi Exit Disc. attribute of the path. A value of 4294967295 indicates the absence of this attribute. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.6.1.13 | ColumnalaBgpPathAtomic | read-only | current | Indicates whether this path is generated without selecting a less specific route. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.6.1.14 | ColumnalaBgpPathAggregatorAs | read-only | current | The AS number of the last BGP4 speaker that performed route aggregation. A value of 0 indicates the absence of this attribute. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.6.1.15 | ColumnalaBgpPathAggregatorAddr | read-only | current | The IP address of the last BGP4 speaker that performed route aggregation. A value of 0.0.0.0 indicates the absence of this attribute. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.6.1.16 | ColumnalaBgpPathCommunity | read-only | current | The community attribute of the path. The communities are represented as series of 4 octet values. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.6.1.17 | ColumnalaBgpPathUnknownAttr | read-only | current | One or more path attributes not understood by this BGP4 speaker. Size of zero (0) indicates the absence of such attribute(s). Octets beyond the maximum size, i… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.6.1.18 | ColumnalaBgpPathOriginatorId | read-only | current | The Router Id of the BGP4 speaker that performed route reflection, if this is a reflected route in the local AS. A value of 0.0.0.0 indicates the absence of th… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.6.1.19 | ColumnalaBgpPathClusterList | read-only | current | Sequence of Cluster Id values representing the reflection path that the route has passed, if this is a reflected route in the local AS. Size of zero (0) indica… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.6.1.20 | ColumnalaBgpPathPeerInetType | read-only | current | Indicates whether the peer who sent this path has an IPv4 address or an IPv6 address. If set to ipv4, the peer has an IPv4 address, and the value of alaBgpPath… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.6.1.21 | ColumnalaBgpPathPeerName | read-only | current | The symbolic name of the peer that sent this path. For paths corresponding to local or redistributed routes on this router, the value is set to 'none'. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.7 | TablealaBgpDampTable | not-accessible | current | BGP Dampened paths table. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.7.1 | RowalaBgpDampEntry | not-accessible | current | BGP Network entry. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.7.1.1 | ColumnalaBgpDampAddr | read-only | current | Destination address. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.7.1.2 | ColumnalaBgpDampMask | read-only | current | Destination mask. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.7.1.3 | ColumnalaBgpDampPeerAddr | read-only | current | Neighbour address. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.7.1.4 | ColumnalaBgpDampFigureOfMerit | read-only | current | The figure of merit value. This is a floating point value with 2 digit precision. For example, a value of 3.5 is encoded as 350, a value of 0.9 is encoded as 9… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.7.1.5 | ColumnalaBgpDampFlaps | read-only | current | The number of times this route has flapped. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.7.1.6 | ColumnalaBgpDampDuration | read-only | current | Time in seconds since the flap was noticed. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.7.1.7 | ColumnalaBgpDampLastUpdateTime | read-only | current | Time in seconds since this damp entry (figure of merit) was last updated. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.7.1.8 | ColumnalaBgpDampReuseTime | read-only | current | Time in seconds until this route will be reused. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.7.1.9 | ColumnalaBgpDampClear | read-write | current | A value of clear will clear this damp history information. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8 | NodealaBgpPolicy | |||
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.1 | TablealaBgpRouteMapTable | not-accessible | current | BGP Policy RouteMap table. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.1.1 | RowalaBgpRouteMapEntry | not-accessible | current | BGP Route Map Entry. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.1.1.1 | ColumnalaBgpRouteMapName | read-only | current | Name of the route map. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.1.1.2 | ColumnalaBgpRouteMapInst | read-only | current | Instance of this route map. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.1.1.3 | ColumnalaBgpRouteMapAsPathMatchListId | read-create | current | This is same as alaBgpAspathMatchListId. It identifies the matching criteria list of Autonomous system paths. Empty quotes indicate no autonomous system paths … |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.1.1.4 | ColumnalaBgpRouteMapPrefixMatchListId | read-create | current | This is same as alaBgpPrefixMatchListId. It identifies the matching criteria list of prefixes. Empty quotes indicate no prefix matching criteria is to be appli… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.1.1.5 | ColumnalaBgpRouteMapCommunityMatchListId | read-create | current | This is same as alaBgpCommunityMatchListId. It identifies the matching criteria list of communities. Empty quotes indicate no community matching criteria is to… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.1.1.6 | ColumnalaBgpRouteMapOrigin | read-create | current | The value to set the origin of the routes matched by this RouteMap instance. A value of none means no origin is to be set. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.1.1.7 | ColumnalaBgpRouteMapLocalPref | read-create | current | The value to set the LOCAL PREF attribute of the routes matched by this RouteMap instance. This value is added to/is subtracted from/replaces the LOCAL PREF at… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.1.1.8 | ColumnalaBgpRouteMapLocalPrefMode | read-create | current | This variable specifies how alaBgpRouteMapLocalPref is to be operated on an existing LPREF attribute of a route on which this RouteMap instance is applied to. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.1.1.9 | ColumnalaBgpRouteMapMed | read-create | current | The value to set the MULTI EXIT DISC attribute of the routes matched by this RouteMap instance. This value is added to/is subtracted from/replaces the MULTI EX… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.1.1.10 | ColumnalaBgpRouteMapMedMode | read-create | current | This variable specifies how alaBgpRouteMapMed is to be operated on an existing MULTI EXIT DISC attribute of a route on which this RouteMap instance is applied … |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.1.1.11 | ColumnalaBgpRouteMapAsPrepend | read-create | current | The value to prepend to the AS_PATH attribute of the routes matched by this RouteMap instance. Empty quotes indicates no AS_PATH prepending is to be done. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.1.1.12 | ColumnalaBgpRouteMapSetCommunityMode | read-create | current | Determines whether alaBgpRouteMapCommunity will be adding to or replacing the COMMUNITY attribute of the routes matched by this RouteMap instance. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.1.1.13 | ColumnalaBgpRouteMapCommunity | read-create | current | The value to set the COMMUNITY attribute of the routes matched by this RouteMap instance. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.1.1.14 | ColumnalaBgpRouteMapMatchAsRegExp | read-create | current | AsPath regular expression matching primitive. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.1.1.15 | ColumnalaBgpRouteMapMatchPrefix | read-create | current | Prefix match primitive. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.1.1.16 | ColumnalaBgpRouteMapMatchMask | read-create | current | Prefix match mask primitive |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.1.1.17 | ColumnalaBgpRouteMapMatchCommunity | read-create | current | Community match primitive |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.1.1.18 | ColumnalaBgpRouteMapWeight | read-create | current | This sets the weight for the incoming route. This parameter has no effect on outbound policy. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.1.1.19 | ColumnalaBgpRouteMapAction | read-create | current | This determines whether to allow a matching route to pass through. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.1.1.20 | ColumnalaBgpRouteMapRowStatus | read-create | current | Row status variable |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.2 | TablealaBgpAspathMatchListTable | not-accessible | current | BGP Policy Aspath criteria matching table. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.2.1 | RowalaBgpAspathMatchListEntry | not-accessible | current | Aspath matching entry . |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.2.1.1 | ColumnalaBgpAspathMatchListId | read-only | current | Identifier of this list of autonomous system path matching criteria. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.2.1.2 | ColumnalaBgpAspathMatchListRegExp | read-only | current | The regular expression identifying the autnomous system paths to be matched by this instance. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.2.1.3 | ColumnalaBgpAspathMatchListPriority | read-create | current | This determines the order in which the matching regular expressions are applied in the list identified by alaBgpAspathMatchListId. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.2.1.4 | ColumnalaBgpAspathMatchListAction | read-create | current | This determines whether to accept or reject a matching route. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.2.1.5 | ColumnalaBgpAspathMatchListRowStatus | read-create | current | Row status variable |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.2.1.6 | ColumnalaBgpAspathMatchListSubIndex | read-only | current | The primary index of this list. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.3 | TablealaBgpPrefixMatchListTable | not-accessible | current | BGP Policy prefix matching criteria table. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.3.1 | RowalaBgpPrefixMatchListEntry | not-accessible | current | BGP Prefix matching instance. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.3.1.1 | ColumnalaBgpPrefixMatchListId | read-only | current | Identifier of this list of autonomous system path matching criteria. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.3.1.2 | ColumnalaBgpPrefixMatchListAddr | read-only | current | The address to be matched. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.3.1.3 | ColumnalaBgpPrefixMatchListMask | read-only | current | The mask to be matched. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.3.1.4 | ColumnalaBgpPrefixMatchListGE | read-create | current | Specifies the minimum length of the mask to be matched. A value of 0 means this criteria is absent. The value of alaBgpPrefixMatchListGE must be > length of (a… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.3.1.5 | ColumnalaBgpPrefixMatchListLE | read-create | current | Specifies the maximum length (inclusive) of the mask to be matched. A value of 0 means this criteria is absent. The value of alaBgpPrefixMatchListLE must be >=… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.3.1.6 | ColumnalaBgpPrefixMatchListAction | read-create | current | This determines whether to accept or reject a matching route. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.3.1.7 | ColumnalaBgpPrefixMatchListRowStatus | read-create | current | Row status variable |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.4 | TablealaBgpCommunityMatchListTable | not-accessible | current | BGP Policy Community criteria matching table. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.4.1 | RowalaBgpCommunityMatchListEntry | not-accessible | current | Community matching entry . |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.4.1.1 | ColumnalaBgpCommunityMatchListId | read-only | current | Identifier of this list of communities matching criteria. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.4.1.2 | ColumnalaBgpCommunityMatchListString | read-only | current | The string identifying the communities to be matched by this instance. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.4.1.3 | ColumnalaBgpCommunityMatchListPriority | read-create | current | This determines the order in which the matching regular expressions are applied in the list identified by alaBgpCommunityMatchListId. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.4.1.4 | ColumnalaBgpCommunityMatchListType | read-create | current | This determines the matching type. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.4.1.5 | ColumnalaBgpCommunityMatchListAction | read-create | current | This determines whether to accept or reject a matching route. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.4.1.6 | ColumnalaBgpCommunityMatchListRowStatus | read-create | current | Row status variable. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.4.1.7 | ColumnalaBgpCommunityMatchListSubIndex | read-only | current | The primary index of this list. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.5 | TablealaBgpAspathPriMatchListTable | not-accessible | current | Priority sorted view of BGP Policy Aspath matching table. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.5.1 | RowalaBgpAspathPriMatchListEntry | not-accessible | current | Aspath matching entry . |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.5.1.1 | ColumnalaBgpAspathPriMatchListId | read-only | current | Identifier of this list of autonomous system path matching criteria. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.5.1.2 | ColumnalaBgpAspathPriMatchListPriority | read-only | current | This determines the order in which the matching regular expressions are applied in the list identified by alaBgpAspathPriMatchListId. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.5.1.3 | ColumnalaBgpAspathPriMatchListIntIdx | read-only | current | This is the order in which the matching regular expressions are created in the list identified by alaBgpAspathPriMatchListId. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.5.1.4 | ColumnalaBgpAspathPriMatchListRegExp | read-only | current | The regular expression identifying the autnomous system paths to be matched by this instance |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.5.1.5 | ColumnalaBgpAspathPriMatchListAction | read-only | current | This determines whether to accept or reject a matching route. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.5.1.6 | ColumnalaBgpAspathPriMatchListRowStatus | read-only | current | Row status variable. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.6 | TablealaBgpCommunityPriMatchListTable | not-accessible | current | Priority sorted view of BGP Policy Community matching table. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.6.1 | RowalaBgpCommunityPriMatchListEntry | not-accessible | current | Community matching entry . |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.6.1.1 | ColumnalaBgpCommunityPriMatchListId | read-only | current | Identifier of this list of communities matching criteria. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.6.1.2 | ColumnalaBgpCommunityPriMatchListPriority | read-only | current | This determines the order in which the matching regular expressions are applied in the list identified by alaBgpCommunityPriMatchListId. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.6.1.3 | ColumnalaBgpCommunityPriMatchListIntIdx | read-only | current | This determines the order in which the matching regular expressions are created in the list identified by alaBgpCommunityPriMatchListId. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.6.1.4 | ColumnalaBgpCommunityPriMatchListString | read-only | current | The string identifying the communities to be matched by this instance. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.6.1.5 | ColumnalaBgpCommunityPriMatchListType | read-only | current | This determines the matching type. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.6.1.6 | ColumnalaBgpCommunityPriMatchListAction | read-only | current | This determines whether to accept or reject a matching route. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.6.1.7 | ColumnalaBgpCommunityPriMatchListRowStatus | read-only | current | Row status variable |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.7 | TablealaBgpPrefix6MatchListTable | not-accessible | current | BGP Policy prefix6 matching criteria table. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.7.1 | RowalaBgpPrefix6MatchListEntry | not-accessible | current | BGP Prefix6 matching instance. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.7.1.1 | ColumnalaBgpPrefix6MatchListId | not-accessible | current | Identifier of this list of autonomous system path matching criteria. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.7.1.2 | ColumnalaBgpPrefix6MatchListAddr | not-accessible | current | The IPv6 Prefix to be matched. A value of 0 indicates default route prefix. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.7.1.3 | ColumnalaBgpPrefix6MatchListAddrLength | not-accessible | current | The length in bits of the IPv6 prefix being matched. A value of 0 indicates default route prefix. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.7.1.4 | ColumnalaBgpPrefix6MatchListGE | read-create | current | Specifies the minimum length of the mask to be matched. A value of 0 means this criteria is absent. The value of alaBgpPrefix6MatchListGE must be > length of (… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.7.1.5 | ColumnalaBgpPrefix6MatchListLE | read-create | current | Specifies the maximum length (inclusive) of the mask to be matched. A value of 0 means this criteria is absent. The value of alaBgpPrefix6MatchListLE must be >… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.7.1.6 | ColumnalaBgpPrefix6MatchListAction | read-create | current | This determines whether to accept or reject a matching route. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.8.7.1.7 | ColumnalaBgpPrefix6MatchListRowStatus | read-create | current | Row status variable |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.9 | TablealaBgpRedistRouteTable | not-accessible | deprecated | A configuration table which controls the routes to be redistributed by BGP from other routing protocols. This table has been deprecated. Use the alaRouteMapRed… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.9.1 | RowalaBgpRedistRouteEntry | not-accessible | deprecated | A configuration table which controls the routes to be redistributed by BGP from other routing protocols. This entry has been deprecated. Use the alaRouteMapRed… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.9.1.1 | ColumnalaBgpRedistRouteProto | read-write | deprecated | Protocol from where this route is to be imported from. This object has been deprecated. Use alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.9.1.2 | ColumnalaBgpRedistRouteDest | read-only | deprecated | The destination IP address of this route. This object has been deprecated. Use alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.9.1.3 | ColumnalaBgpRedistRouteMask | read-only | deprecated | The network mask for this route. This object has been deprecated. Use alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.9.1.4 | ColumnalaBgpRedistRouteMetric | read-create | deprecated | The med to be sent to external peers. If 0, no med is sent. This object has been deprecated. Use alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.9.1.5 | ColumnalaBgpRedistRouteLocalPref | read-create | deprecated | The value to override the default local pref sent to internal peers. If 0, no override is applied. This object has been deprecated. Use alaRouteMapRedistProtoE… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.9.1.6 | ColumnalaBgpRedistRouteCommunity | read-create | deprecated | The value to set the COMMUNITY attribute when advertising this network. This object has been deprecated. Use alaRouteMapRedistProtoEntry objects of AlcatelIND1… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.9.1.7 | ColumnalaBgpRedistRouteSubnetMatch | read-create | deprecated | Redistribute all the subnet routes if it is enabled. Otherwise, redistribute only matching network route. This object has been deprecated. Use alaRouteMapRedis… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.9.1.8 | ColumnalaBgpRedistRouteEffect | read-create | deprecated | Controls the redistribution of routes in this range. This object has been deprecated. Use alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.9.1.9 | ColumnalaBgpRedistRouteRowStatus | read-create | deprecated | Row status variable. This object has been deprecated. Use alaRouteMapRedistProtoEntry objects of AlcatelIND1RouteMap.mib. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.10 | TablealaBgpDebugTable | not-accessible | deprecated | BGP debugging table - has been deprecated in favour of alaDrcTmBgpDebug Configuration. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.10.1 | RowalaBgpDebugEntry | not-accessible | deprecated | BGP debugging entry - has been deprecated in favour of alaDrcTmBgpDebug Configuration. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.10.1.1 | ColumnalaBgpDebugEvent | read-only | deprecated | All the Debug Events/types described here stands deprecated in favour of MIB objects defined in alaDrcTmBgpDebug Configuration. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.10.1.2 | ColumnalaBgpDebugStatus | read-write | deprecated | All the Debug Events/types described here stands deprecated in favour of MIB objects defined in alaDrcTmBgpDebug Configuration. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.10.1.3 | ColumnalaBgpDebugDescription | read-only | deprecated | All the Debug Events/types described here stands deprecated in favour of MIB objects defined in alaDrcTmBgpDebug Configuration. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.11 | TablealaBgpNetwork6Table | not-accessible | current | BGP Network6 configuration table. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.11.1 | RowalaBgpNetwork6Entry | not-accessible | current | BGP Network6 entry. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.11.1.1 | ColumnalaBgpNetwork6Addr | read-write | current | The IPv6 address of the BGP Network. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.11.1.2 | ColumnalaBgpNetwork6MaskLen | read-write | current | The number of bits that are significant in the IPv6 address prefix of the BGP Network. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.11.1.3 | ColumnalaBgpNetwork6State | read-only | current | Indicates whether the network is being actively advertised or not. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.11.1.4 | ColumnalaBgpNetwork6Metric | read-create | current | This specifies the MED to be used when advertising this network to external peers. A value of 0 indicates not to send MED. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.11.1.5 | ColumnalaBgpNetwork6LocalPref | read-create | current | This specifies the override default LOCAL PREF to be used when advertising this network to internal peers. A value of 0 indicates not to override the default. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.11.1.6 | ColumnalaBgpNetwork6Community | read-create | current | The value to set the COMMUNITY attribute when advertising this network. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.11.1.7 | ColumnalaBgpNetwork6RowStatus | read-create | current | Row status variable. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.12 | TablealaBgpRoute6Table | not-accessible | current | BGP IPv6 Routing table. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.12.1 | RowalaBgpRoute6Entry | not-accessible | current | BGP Route entry. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.12.1.1 | ColumnalaBgpRoute6Addr | read-only | current | Destination address. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.12.1.2 | ColumnalaBgpRoute6MaskLen | read-only | current | Destination address length. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.12.1.3 | ColumnalaBgpRoute6State | read-only | current | Indicates whether the route is being actively advertised or not. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.12.1.4 | ColumnalaBgpRoute6Paths | read-only | current | Number of total paths available to this destination. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.12.1.5 | ColumnalaBgpRoute6FeasiblePaths | read-only | current | Number of Feasible paths available to this destination. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.12.1.6 | ColumnalaBgpRoute6NextHop | read-only | current | The BGP Nexthop to reach this destination. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.12.1.7 | ColumnalaBgpRoute6IgpNextHop | read-only | current | The IGP Nexthop to reach this destination. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.12.1.8 | ColumnalaBgpRoute6IsHidden | read-only | current | Indicates whether the route is hidden by an aggregate. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.12.1.9 | ColumnalaBgpRoute6IsAggregate | read-only | current | Indicates whether the route is an aggregate. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.12.1.10 | ColumnalaBgpRoute6IsAggregateContributor | read-only | current | Indicates whether the route is a contributor to an aggregate. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.12.1.11 | ColumnalaBgpRoute6AdvNeighbors | read-only | current | List of (addresses of) neighbours to whom this route has been advertised is encoded here. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.12.1.12 | ColumnalaBgpRoute6IsAggregateList | read-only | current | Indicates whether the route is on an aggregate list. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.12.1.13 | ColumnalaBgpRoute6IsAggregateWait | read-only | current | Indicates whether the route is an aggregate waiting for a contributor. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.12.1.14 | ColumnalaBgpRoute6IsOnEbgpChgList | read-only | current | Indicates whether the route is placed on list of EBGP routes. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.12.1.15 | ColumnalaBgpRoute6IsOnIbgpClientChgList | read-only | current | Indicates whether the route is placed on list of IBGP reflector-client routes. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.12.1.16 | ColumnalaBgpRoute6IsOnIbgpChgList | read-only | current | Indicates whether the route is placed on list of IBGP non-reflector-client routes. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.12.1.17 | ColumnalaBgpRoute6IsOnLocalChgList | read-only | current | Indicates whether the route is placed on list of local routes. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.12.1.18 | ColumnalaBgpRoute6IsOnDeleteList | read-only | current | Indicates whether the route is placed on delete list. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.12.1.19 | ColumnalaBgpRoute6IsDampened | read-only | current | Indicates whether the route is being route flap dampened. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.13 | TablealaBgpPath6Table | not-accessible | current | BGP Path table. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.13.1 | RowalaBgpPath6Entry | not-accessible | current | BGP path6 entry. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.13.1.1 | ColumnalaBgpPath6Addr | read-only | current | Destination address. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.13.1.2 | ColumnalaBgpPath6MaskLen | read-only | current | Destination address length. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.13.1.3 | ColumnalaBgpPath6PeerBgpId | read-only | current | The BGP Identifier of the peer who sent this path. For locally sourced routes, the value is 0.0.0.0. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.13.1.4 | ColumnalaBgpPath6SrcProto | read-only | current | The protocol from which the path was learnt. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.13.1.5 | ColumnalaBgpPath6Weight | read-only | current | The weight assigned to this path. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.13.1.6 | ColumnalaBgpPath6Pref | read-only | current | The degree of preference assigned to this path. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.13.1.7 | ColumnalaBgpPath6State | read-only | current | Indicates the state of the path. When path state is none it indicates that there are no paths to this prefix/len and the route is being purged from the system.… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.13.1.8 | ColumnalaBgpPath6Origin | read-only | current | The ORIGIN attribute of the path. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.13.1.9 | ColumnalaBgpPath6NextHop | read-only | current | The NEXTHOP attribute of the path. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.13.1.10 | ColumnalaBgpPath6As | read-only | current | The sequence of AS path segments. Each AS path segment is represented by a triple <TYPE, LENGTH, VALUE>. The TYPE is a 1-octet field which has two possible val… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.13.1.11 | ColumnalaBgpPath6LocalPref | read-only | current | The LOCAL_PREF attribute of the path. A value of -1 indicates the absence of this attribute. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.13.1.12 | ColumnalaBgpPath6Med | read-only | current | The Multi Exit Disc. attribute of the path. A value of 4294967295 indicates the absence of this attribute. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.13.1.13 | ColumnalaBgpPath6Atomic | read-only | current | Indicates whether this path is generated without selecting a less specific route. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.13.1.14 | ColumnalaBgpPath6AggregatorAs | read-only | current | The AS number of the last BGP4 speaker that performed route aggregation. A value of 0 indicates the absence of this attribute. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.13.1.15 | ColumnalaBgpPath6AggregatorAddr | read-only | current | The IP address of the last BGP4 speaker that performed route aggregation. A value of 0.0.0.0 indicates the absence of this attribute. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.13.1.16 | ColumnalaBgpPath6Community | read-only | current | The community attribute of the path. The communities are represented as series of 4 octet values. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.13.1.17 | ColumnalaBgpPath6UnknownAttr | read-only | current | One or more path attributes not understood by this BGP4 speaker. Size of zero (0) indicates the absence of such attribute(s). Octets beyond the maximum size, i… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.13.1.18 | ColumnalaBgpPath6OriginatorId | read-only | current | The Router Id of the BGP4 speaker that performed route reflection, if this is a reflected route in the local AS. A value of 0.0.0.0 indicates the absence of th… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.13.1.19 | ColumnalaBgpPath6ClusterList | read-only | current | Sequence of Cluster Id values representing the reflection path that the route has passed, if this is a reflected route in the local AS. Size of zero (0) indica… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.13.1.20 | ColumnalaBgpPath6PeerName | read-only | current | The symbolic name of the peer that sent this path. For paths corresponding to local or redistributed routes on this router, the value is set to 'none'. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14 | TablealaBgpPeer6Table | not-accessible | current | BGP IPv6 peer table. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1 | RowalaBgpPeer6Entry | not-accessible | current | BGP IPv6 Peer configuration entry. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.1 | ColumnalaBgpPeer6Addr | read-only | current | Ipv6 Address of the peer. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.2 | ColumnalaBgpPeer6AS | read-create | current | Autonomous system of the peer. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.3 | ColumnalaBgpPeer6Passive | read-create | current | Enable/Disable the peer passive status. If enabled the peer will not initiate a transport connection. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.4 | ColumnalaBgpPeer6Name | read-create | current | A symbolic name for the neighbour. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.5 | ColumnalaBgpPeer6MultiHop | read-create | current | If enabled the external peer is allowed to be multiple hops away. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.6 | ColumnalaBgpPeer6MaxPrefix | read-create | current | The maximum prefixes to be accepted from this peer. If this maximum is reached, the peer will be sent a NOTIFY message with a CEASE ecode. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.7 | ColumnalaBgpPeer6MaxPrefixWarnOnly | read-create | current | If enabled, the operator will be warned when the peer reaches 80% of the configured maximum prefixes. To see this message, BGP debug for type 'warnings' must b… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.8 | ColumnalaBgpPeer6NextHopSelf | read-create | current | If enabled, nexthop processing in the updates sent to this peer is disabled and is set to the IPv6 address of the interface attached to this peer. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.9 | ColumnalaBgpPeer6SoftReconfig | read-create | current | Enable/Disable dynamic policy configurability on the connection to this peer. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.10 | ColumnalaBgpPeer6InSoftReset | read-only | current | Route refresh capability is Enabled/Disabled on the connection to this peer. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.11 | ColumnalaBgpPeer6Ipv4Unicast | read-only | current | Multiprotocol capability IPv4 Unicast is Enabled/Disabled on the connection to this peer . |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.12 | ColumnalaBgpPeer6Ipv4Multicast | read-only | current | Multiprotocol capability IPv4 Multicast is Enabled/Disabled on the connection to this peer . |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.13 | ColumnalaBgpPeer6RcvdRtRefreshMsgs | read-only | current | The number of route refresh messages received from this peer. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.14 | ColumnalaBgpPeer6SentRtRefreshMsgs | read-only | current | The number of route refresh messages sent to this peer. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.15 | ColumnalaBgpPeer6RouteMapOut | read-create | current | The name of the policy map to be applied to the updates sent to this peer. This is same as alaBgpPolicyRouteMapName. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.16 | ColumnalaBgpPeer6RouteMapIn | read-create | current | The name of the policy map to be applied to the updates received from this peer. This is same as alaBgpPolicyRouteMapName. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.17 | ColumnalaBgpPeer6LocalAddr | read-create | current | Local IPv6 address of this connection. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.18 | ColumnalaBgpPeer6LastDownReason | read-only | current | The general reason for termination of last established session with the peer since the protocol was operationally up. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.19 | ColumnalaBgpPeer6LastDownTime | read-only | current | The time elapsed since the BGP session with the peer was terminated. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.20 | ColumnalaBgpPeer6LastReadTime | read-only | current | The time elapsed since we last read data from the peer. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.21 | ColumnalaBgpPeer6RcvdNotifyMsgs | read-only | current | The Number of notification messages received from this peer. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.22 | ColumnalaBgpPeer6SentNotifyMsgs | read-only | current | The Number of notification messages sent to this peer. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.23 | ColumnalaBgpPeer6LastSentNotifyReason | read-only | current | The last notification reason sent. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.24 | ColumnalaBgpPeer6LastRecvNotifyReason | read-only | current | The last notification reason received. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.25 | ColumnalaBgpPeer6RcvdPrefixes | read-only | current | The Number of prefixes received from this peer. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.26 | ColumnalaBgpPeer6DownTransitions | read-only | current | The Number of times this peer session transitioned to IDLE state. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.27 | ColumnalaBgpPeer6Type | read-only | current | This indicates whether the peer belongs to the local autonomous system(internal) or another autonomous system. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.28 | ColumnalaBgpPeer6ClearCounter | read-create | current | Setting a value of clear into this variable will clear the per peer statistics. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.29 | ColumnalaBgpPeer6AutoReStart | read-create | current | Enable/Disable the peer autostart status. If enabled, the peer will be automatically restarted (if administratively enabled) after the transition to IDLE state. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.30 | ColumnalaBgpPeer6ClientStatus | read-create | current | If enabled this peer is a route reflection client. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.31 | ColumnalaBgpPeer6ConfedStatus | read-create | current | If enabled this peer is a member of our confederation. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.32 | ColumnalaBgpPeer6RemovePrivateAs | read-create | current | If enabled private as numbers are stripped out in the updates sent to this peer. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.33 | ColumnalaBgpPeer6TTL | read-create | current | TTL count for packets on this TCP connection. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.34 | ColumnalaBgpPeer6AspathListOut | read-create | current | The name of the aspath-list to be applied to the updates sent to this peer. This is same as alaBgpAspathMatchListId. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.35 | ColumnalaBgpPeer6AspathListIn | read-create | current | The name of the aspath-list to be applied to the updates received from this peer. This is same as alaBgpAspathMatchListId. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.36 | ColumnalaBgpPeer6PrefixListOut | read-create | current | The name of the prefix-list to be applied to the updates sent to this peer. This is same as alaBgpPrefixMatchListId. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.37 | ColumnalaBgpPeer6PrefixListIn | read-create | current | The name of the prefix-list to be applied to the updates received from this peer. This is same as alaBgpPrefixMatchListId. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.38 | ColumnalaBgpPeer6CommunityListOut | read-create | current | The name of the community-list to be applied to the updates sent to this peer. This is same as alaBgpCommunityMatchListId. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.39 | ColumnalaBgpPeer6CommunityListIn | read-create | current | The name of the community-list to be applied to the updates received from this peer. This is same as alaBgpCommunityMatchListId. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.40 | ColumnalaBgpPeer6Restart | read-create | current | Setting a value of restart into this variable will restart the peer. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.41 | ColumnalaBgpPeer6DefaultOriginate | read-create | current | If enabled a default route is sent to this neighbour. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.42 | ColumnalaBgpPeer6ReconfigureInBound | read-create | current | Setting a value of reconfigure into this variable will re-start inbound policy evaluation of the peer. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.43 | ColumnalaBgpPeer6ReconfigureOutBound | read-create | current | Setting a value of reconfigure into this variable will re-start outbound policy evaluation of the peer. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.44 | ColumnalaBgpPeer6MD5Key | read-create | current | Value of the MD5 key used in TCP connection with the peer. This field is secured and returned value is non significant. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.45 | ColumnalaBgpPeer6MD5KeyEncrypt | read-only | current | Value of the MD5 key encrypted using 3DES algorithm. It is calculated from MD5 key value, and is used only to restore configuration on reboot. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.46 | ColumnalaBgpPeer6RowStatus | read-create | current | Row status variable. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.47 | ColumnalaBgpPeer6UpTransitions | read-only | current | The Number of times this peer session transitioned to ESTABLISHED state. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.48 | ColumnalaBgpPeer6LastWriteTime | read-only | current | The time elapsed since we last sent data to the peer. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.49 | ColumnalaBgpPeer6RcvdMsgs | read-only | current | The Number of messages received from the peer. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.50 | ColumnalaBgpPeer6SentMsgs | read-only | current | The Number of messages sent to the peer. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.51 | ColumnalaBgpPeer6RcvdUpdMsgs | read-only | current | The Number of update messages received from the peer. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.52 | ColumnalaBgpPeer6SentUpdMsgs | read-only | current | The Number of update messages sent to the peer. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.53 | ColumnalaBgpPeer6LastTransitionTime | read-only | current | The time elapsed since the BGP session was operationally up or down to the peer. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.54 | ColumnalaBgpPeer6LastUpTime | read-only | current | The time elapsed since the BGP session with the peer was established. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.55 | ColumnalaBgpPeer6BgpId | read-only | current | BGP Identifier of the peer. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.56 | ColumnalaBgpPeer6LocalIntfName | read-create | current | The user defined name used to identify the local IPv6 interface for this peer's TCP connection. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.57 | ColumnalaBgpPeer6RestartTime | read-only | current | The graceful restart time interval advertised by this peer. A value of 0 indicates that this peer is not capable of graceful restart, and has not advertised th… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.58 | ColumnalaBgpPeer6RestartState | read-only | current | Indicates whether the peer is currently performing a graceful restart. A value of none indicates that this peer is not capable of graceful restart. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.59 | ColumnalaBgpPeer6RestartFwdState | read-only | current | Indicates whether the peer has preserved the forwarding state during the graceful restart. This value is defined only for a peer that has advertised graceful r… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.60 | ColumnalaBgpPeer6Ipv6Unicast | read-only | current | Indicates whether the peer has advertised Multiprotocol IPv6 Unicast capability in its BGP OPEN message. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.61 | ColumnalaBgpPeer6HoldTime | read-only | current | Time interval in seconds for the Hold Timer established with the peer. The value of this object is calculated by this BGP speaker by using the smaller of the v… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.62 | ColumnalaBgpPeer6KeepAlive | read-only | current | Time interval in seconds for the KeepAlive timer established with the peer. The value of this object is calculated by this BGP speaker such that, when compared… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.63 | ColumnalaBgpPeer6ConnRetryInterval | read-create | current | Time interval in seconds for the ConnectRetry timer. The suggested value for this timer is 120 seconds. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.64 | ColumnalaBgpPeer6HoldTimeConfigured | read-create | current | Time interval in seconds for the Hold Time configured for this BGP speaker with this peer. This value is placed in an OPEN message sent to this peer by this BG… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.65 | ColumnalaBgpPeer6KeepAliveConfigured | read-create | current | Time interval in seconds for the KeepAlive timer configured for this BGP speaker with this peer. The value of this object will only determine the KEEPALIVE mes… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.66 | ColumnalaBgpPeer6Ipv4NextHop | read-create | current | The IPv4 nexthop address to be used for IPv4 routes advertised to this peer. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.67 | ColumnalaBgpPeer6Ipv6NextHop | read-create | current | The IPv6 nexthop address to be used for IPv6 routes advertised to this peer. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.68 | ColumnalaBgpPeer6AdminStatus | read-create | current | The desired state of the BGP connection. A transition from 'stop' to 'start' will cause the BGP Start Event to be generated. A transition from 'start' to 'stop… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.69 | ColumnalaBgpPeer6State | read-only | current | The BGP peer connection state. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.70 | ColumnalaBgpPeer6LocalPort | read-only | current | The local port number for this peer's TCP connection. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.71 | ColumnalaBgpPeer6TcpWindowSize | read-only | current | The size of the socket buffers, in bytes, used for this TCP connection. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.72 | ColumnalaBgpPeer6ActivateIpv6 | read-create | current | If enabled, the Multiprotocol IPv6 Unicast capability is advertised to this peer. If disabled, the capability is not advertised in the OPEN message. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.73 | ColumnalaBgpPeer6MinRouteAdvertisementInterval | read-create | current | Time interval in seconds for the MinRouteAdvertisementInterval timer. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.74 | ColumnalaBgpPeer6Prefix6ListOut | read-create | current | The name of the prefix6-list to be applied to the updates sent to this peer. This is same as alaBgpPrefix6MatchListId. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.1.14.1.75 | ColumnalaBgpPeer6Prefix6ListIn | read-create | current | The name of the prefix6-list to be applied to the updates received from this peer. This is same as alaBgpPrefix6MatchListId. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.2 | IdentityalcatelIND1BGPMIBConformance | current | Branch For Border Gateway Protocol (BGP) Subsystem Conformance Information. | |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.2.1 | IdentityalcatelIND1BGPMIBGroups | current | Branch For Border Gateway Protocol (BGP) Subsystem Units Of Conformance. | |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.2.1.1 | GroupalabgpMIBGlobalsGroup | current | A collection of objects providing information on global BGP state. | |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.2.1.2 | GroupalabgpMIBPeerGroup | current | A collection of objects for managing BGP peers. | |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.2.1.3 | GroupalabgpMIBAggrGroup | current | A collection of objects for managing BGP aggregates. | |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.2.1.4 | GroupalabgpMIBNetworkGroup | current | A collection of objects for managing BGP networks. | |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.2.1.5 | GroupalabgpMIBRouteGroup | current | A collection of objects for managing BGP routes. | |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.2.1.6 | GroupalabgpMIBPathAttrGroup | current | A collection of objects for managing BGP paths attributes. | |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.2.1.7 | GroupalabgpMIBDampGroup | current | A collection of objects for managing BGP dampening. | |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.2.1.8 | GroupalabgpMIBRouteMapGroup | current | A collection of objects for managing BGP route maps. | |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.2.1.9 | GroupalabgpMIBAspathListGroup | current | A collection of objects for managing BGP aspath lists. | |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.2.1.10 | GroupalabgpMIBPrefixListGroup | current | A collection of objects for managing BGP prefix lists. | |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.2.1.11 | GroupalabgpMIBCommunityListGroup | current | A collection of objects for managing BGP community lists. | |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.2.1.12 | GroupalabgpMIBAspathPriListGroup | current | A collection of objects for managing BGP aspath lists by priority. | |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.2.1.13 | GroupalabgpMIBCommunityPriListGroup | current | A collection of objects for managing BGP community lists by priority. | |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.2.1.14 | GroupalabgpMIBRedistRouteGroup | deprecated | A collection of objects for managing BGP redistribution routes. These objects have been deprecated, and this group is no longer mandatory. | |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.2.1.15 | GroupalabgpMIBDebugGroup | current | A collection of objects for managing BGP debug infos. These objects have been deprecated, and this group is no longer mandatory. | |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.2.1.16 | GroupalabgpMIBNetwork6Group | current | A collection of objects for managing BGP IPv6 networks. | |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.2.1.17 | GroupalabgpMIBRoute6Group | current | A collection of objects for managing BGP routes. | |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.2.1.18 | GroupalabgpMIBPath6AttrGroup | current | A collection of objects for managing BGP paths attributes. | |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.2.1.19 | GroupalabgpMIBPeer6Group | current | A collection of objects for managing BGP peers. | |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.2.2 | IdentityalcatelIND1BGPMIBCompliances | current | Branch For Border Gateway Protocol (BGP) Subsystem Compliance Statements. | |
| 1.3.6.1.4.1.6486.800.1.2.1.10.5.1.2.2.1 | CompliancealcatelIND1BGPMIBCompliance | current | The compliance statement for entities which implement the BGP4 mib. |