MIB Viewer

ALCATEL-IND1-CHASSIS-MIB

227 objects
This module describes an authoritative enterprise-specific Simple etwork Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line, this is the Chassis Supervision Chassis MIB for managing physical chassis objects not covered in the IETF Entity MIB (rfc 2737). The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
Imported Objects
ALCATEL-IND1-BASEchassisTraps hardentIND1Chassis hardentIND1Physical
ENTITY-MIBentPhysicalIndex PhysicalIndex
SNMP-FRAMEWORK-MIBSnmpAdminString
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMICounter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE Unsigned32
SNMPv2-TCDisplayString MacAddress TEXTUAL-CONVENTION
OIDNameAccessStatusDescription
1.3.6.1.4.1.6486.800.1.1.1.1.1IdentityalcatelIND1ChassisPhysMIBObjectscurrentBranch For Chassis Supervision Chassis Physical MIB Subsystem Managed Objects.
1.3.6.1.4.1.6486.800.1.1.1.1.1.1TablechasEntPhysicalTablenot-accessiblecurrentThis table contains one row per physical entity. It is an extension for the entity physical table (rfc 2737) that is instantiated for every physical entity obj…
1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1RowchasEntPhysicalEntrynot-accessiblecurrentInformation about a particular physical entity.
1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.1ColumnchasEntPhysAdminStatusread-writecurrentAll modules (even empty slots) are in unknown state when the chassis first powers up. Chassis status possible value: powerOn <=> powered up Control Module poss…
1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.2ColumnchasEntPhysOperStatusread-onlycurrentAll modules (even empty slots) are in unknown state when the chassis first powers up. Chassis status possible value : up <=> powered up Control Module possible…
1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.3ColumnchasEntPhysLedStatusread-onlydeprecatedThis object has been deprecated because the other enumerated objects can provide the same information. A get to this object will return 0. The status of each o…
1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.4ColumnchasEntPhysPowerread-onlycurrentThis value is only applicable to the NI, PS and Control Modules. It corresponds to a a static value for the power consumption of an NI module or Control Module…
1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.5ColumnchasEntPhysModuleTyperead-onlycurrentThis object is the unique Module Type or ID from the entities eeprom. This value is guarrantteed to be unique to each type of Module. This value is only intend…
1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.6ColumnchasEntPhysMfgDateread-onlycurrentThis object contains the manufacturing date of the entity. Its format is mmm dd yyyy : NOV 27 2001.
1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.7ColumnchasEntPhysPartNumberread-onlycurrentThis object contains the Alcatel Part Number for the entity. This value is used to identify what is needed when placing orders with Alcatel.
1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.8ColumnchasEntPhysLedStatusOk1read-onlycurrentChassis Management Module (CMM) front panel LED OK1 status indication
1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.9ColumnchasEntPhysLedStatusOk2read-onlycurrentChassis Management Module (CMM) front panel LED OK2 status indication
1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.10ColumnchasEntPhysLedStatusPrimaryCMMread-onlycurrentChassis Management Module (CMM) front panel LED Primary chassis indication
1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.11ColumnchasEntPhysLedStatusSecondaryCMMread-onlycurrentChassis Management Module (CMM) front panel LED Secondary chassis indication
1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.12ColumnchasEntPhysLedStatusTemperatureread-onlycurrentChassis Management Module (CMM) front panel LED temperature status indication
1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.13ColumnchasEntPhysLedStatusFanread-onlycurrentFor Hawk stacks used as a fan group status LED. For eagle CMM's user instead: Fan 1 (top left), Fan 2 (top right), Fan 3 (rear)
1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.14ColumnchasEntPhysLedStatusFan1read-onlycurrentChassis fan status, Eagle (top left), Fuji (top right)
1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.15ColumnchasEntPhysLedStatusFan2read-onlycurrentChassis fan status, Eagle (top right), Fuji (middle right)
1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.16ColumnchasEntPhysLedStatusFan3read-onlycurrentChassis fan status, Eagle (rear), Fuji (bottom right)
1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.17ColumnchasEntPhysLedStatusBackupPSread-onlycurrentChassis backup power supply status indication
1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.18ColumnchasEntPhysLedStatusInternalPSread-onlycurrentChassis internal power supply status indication
1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.19ColumnchasEntPhysLedStatusControlread-onlycurrentChassis control status
1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.20ColumnchasEntPhysLedStatusFabricread-onlycurrentChassis Management Module (CMM) Fabric status indication
1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.21ColumnchasEntPhysLedStatusPSUread-onlycurrentChassis Power Supply Unit status indication
1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.22ColumnchasEntPhysAsicRevread-onlycurrentThis object contains the ASIC revision Number of the ni entity
1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.23ColumnchasEntPhysCpldRevread-onlycurrentThis object contains the CPLD revision Number of the ni entity
1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.24ColumnchasEntPhysDefaultMinibootRevread-onlycurrentThis object contains the default miniboot version Number of the ni entity
1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.25ColumnchasEntPhysBackUpMinibootRevread-onlycurrentThis object contains the backup miniboot version Number of the ni entity
1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.26ColumnchasEntPhysBootromRevread-onlycurrentThis object contains the bootrom version Number of the ni entity
1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.27ColumnchasEntPhysNiNumread-onlycurrentThis value is only applicable to the NI. It indicates an NI associated with this physicalEntry
1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.28ColumnchasEntPhysGbicNumread-onlycurrentThis value is only applicable to the NI. It indicates a gbic associated with this ni
1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.29ColumnchasEntPhysWaveLenread-onlycurrentThis object contains the wave length of a SFP device
1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.30ColumnchasEntPhysUbootRevread-onlycurrentThis object contains the uboot version Number of the ni entity
1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.31ColumnchasEntPhysUbootMinibootRevread-onlycurrentThis object contains the uboot miniboot version Number of the ni entity
1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.32ColumnchasEntPhysMacAddressread-onlycurrentThis object contains the MAC address of the ni entity
1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.33ColumnchasEntPhysPoeSwVersionread-onlycurrentThis object contains the POE SW Revision of the ni entity
1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.34ColumnchasEntPhysC20LFailContread-onlycurrentThis object contains the C20L upgrade failure count of the ni entity
1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.35ColumnchasEntPhysCpuModelread-onlycurrentThis object contains the model description of the cmm/ni cpu
1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.36ColumnchasEntPhysPowerTyperead-onlycurrentThis object specifies the type(AC/DC) of power supply.
1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.37ColumnchasEntPhysPowerControlChecksumread-onlycurrentThis object specifies the power control checksum.
1.3.6.1.4.1.6486.800.1.1.1.1.1.1.1.38ColumnchasEntPhysDdmStatusread-onlycurrentThis object contains the Ddm Status of a SFP device
1.3.6.1.4.1.6486.800.1.1.1.1.2IdentityalcatelIND1ChassisPhysMIBConformancecurrentBranch For Chassis Supervision Chassis Physical MIB Subsystem Conformance Information.
1.3.6.1.4.1.6486.800.1.1.1.1.2.1IdentityalcatelIND1ChassisPhysMIBGroupscurrentBranch For Chassis Supervision Chassis Physical MIB Subsystem Units Of Conformance.
1.3.6.1.4.1.6486.800.1.1.1.1.2.1.1GroupchasEntPhysicalGroupcurrentChassis (inclosure) Entity Physical Group.
1.3.6.1.4.1.6486.800.1.1.1.1.2.1.2GroupchassisPhysNotificationGroupcurrentChassis Supervision Physical Notification Group.
1.3.6.1.4.1.6486.800.1.1.1.1.2.1.3GroupchasSupervisionFlashMemGroupcurrentchassis Supervision Flash Mem group.
1.3.6.1.4.1.6486.800.1.1.1.1.2.1.4GroupalcatelIND1ChassisSupervisionRfsGroupcurrentchassis Supervision RFS commands.
1.3.6.1.4.1.6486.800.1.1.1.1.2.1.5GroupchasSupervisionRfsDfGroupcurrentFile system use.
1.3.6.1.4.1.6486.800.1.1.1.1.2.2IdentityalcatelIND1ChassisPhysMIBCompliancescurrentBranch For Chassis Supervision Chassis Physical MIB Subsystem Compliance Statements.
1.3.6.1.4.1.6486.800.1.1.1.1.2.2.1CompliancealcatelIND1ChassisPhysMIBCompliancecurrentCompliance statement for Chassis Supervision Physical.
1.3.6.1.4.1.6486.800.1.1.1.3.1IdentityalcatelIND1ChassisMIBThis module describes an authoritative enterprise-specific Simple etwork Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Pr…
1.3.6.1.4.1.6486.800.1.1.1.3.1.1IdentityalcatelIND1ChassisMIBObjectscurrentBranch For Chassis Supervision Chassis MIB Subsystem Managed Objects.
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.1TablechasControlModuleTablenot-accessiblecurrentThis table contains one row for the primary control module.
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.1.1RowchasControlModuleEntrynot-accessiblecurrentInformation about the primary control module. This table is an extension of the entity physical table but this class is instanciated only for a the primary con…
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.1.1.1ColumnchasControlRunningVersionread-onlycurrentIdentification of the Running Version (or Running Configuration) for the control module. Note that the Running Version value of (1) unknown, (2) working, or (3…
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.1.1.2ColumnchasControlActivateTimeoutread-writecurrentThis value is in seconds. It represents how much time before the switch automatically falls back to the certified version. This value is set via the Activate(r…
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.1.1.3ColumnchasControlVersionMngtread-writecurrentFor the primary this means: notSignificant - No command applied. certifySynchro - Copy the file from the working to the certified directory and from the primar…
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.1.1.4ColumnchasControlDelayedActivateTimerread-writecurrentTimer value in seconds used to initiate a delayed activate of the primary CMM. Writing this object to a non-zero value results in CMM reboot of the working dir…
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.1.1.5ColumnchasControlCertifyStatusread-onlycurrentReturned value indicates if the control module has been certified (that is the working directory matches the certified directory)
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.1.1.6ColumnchasControlSynchronizationStatusread-onlycurrentReturned value indicates if the control module has been synchronized (that is the working directory matches the working directory on the other control module(s…
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.1.1.7ColumnchasControlAcrossCmmWorkingSynchroStatusread-onlycurrentReturned value indicates if the /working has been synchronized across the CMMs (that is the working directory matches the working directory on all CMMs if pres…
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.1.1.8ColumnchasControlAcrossCmmCertifiedSynchroStatusread-onlycurrentReturned value indicates if the /certified has been synchronized across the CMMs if present)
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.2TablechasControlRedundantTablenot-accessiblecurrentThis table contains one row per control module. There is always at least one control module in the system.
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.2.1RowchasControlRedundantEntrynot-accessiblecurrentInformation about a particular control module this table is an extension of the entity physical table but this class is instanciated only for a particular type…
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.2.1.1ColumnchasControlNumberOfTakeoverread-onlycurrentThis object is a count of the number of times the control module has changed from primary to secondary mode as a result of a Takeover. Note that this object ca…
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.2.1.2ColumnchasControlDelayedRebootTimerread-writecurrentTimer value (in seconds) used to initiate a delayed reboot of the primary or secondary CMM using the certified configuration. Writing this object to a non-zero…
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3TablechasChassisTablenot-accessiblecurrentThis table contains one row per chassis. There is always at least one chassis or many like for stackable product.
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1RowchasChassisEntrynot-accessiblecurrentInformation about a particular control module this table is an extension of the entity physical table but this class is instanciated only for a particular type…
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1.1ColumnchasFreeSlotsread-onlycurrentThe number of free NI front panel slots.
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1.2ColumnchasPowerLeftread-onlycurrentThe power still available on the chassis in Watts.
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1.3ColumnchasNumberOfResetsread-onlycurrentThis object is a count of the number of times this station has been reset since a cold-start.
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1.4ColumnchasHardwareBoardTempread-onlycurrentThis object indicates the current output of the Board Temperature Sensor provided by the LM75 part (degrees Centigrade) for this chassis. This temperature is w…
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1.5ColumnchasHardwareCpuTempread-onlycurrentThis object indicates the current output of the SPARC Temperature Sensor (degrees Centigrade) for this chassis. This object is not applicable for Hawk and 0 is…
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1.6ColumnchasTempRangeread-onlycurrentTemp Range is the value of the temperature sensor for the chassis. The Temp Range value reflects the temperature of the chassis relative to the Temp Threshold …
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1.7ColumnchasTempThresholdread-writecurrentThis object is the threshold temperature in degrees Celsius for the chassis. Temp Threshold is the chassis temperature point at which, when reached due to an a…
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1.8ColumnchasDangerTempThresholdread-onlycurrentThis Threshold is a second one which is hardcoded. When the Chassis Exceeds this value it starts shutting down NIs. This value will be set by the factory and n…
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.3.1.9ColumnchasPrimaryPhysicalIndexread-onlycurrentThis value holds the Entity Table Physical Index for the Control Module that is currently primary. This is to allow snmp managers to determine which Control Mo…
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.4TablechasSupervisionRfsLsTablenot-accessiblecurrentThis table contains a list of file on the remote chassis per directory.
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.4.1RowchasSupervisionRfsLsEntrynot-accessiblecurrentInformation about a remote file. A row in this table contains a file per directory per chassis
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.4.1.1ColumnchasSupervisionRfsLsFileIndexread-onlycurrentThis value holds file Index for the RFS LS table.
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.4.1.2ColumnchasSupervisionRfsLsSlotread-onlycurrentSlot where remote file is located.
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.4.1.3ColumnchasSupervisionRfsLsDirNameread-onlycurrentThe remote directory name where remote file is located in
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.4.1.4ColumnchasSupervisionRfsLsFileNameread-onlycurrentThe file name of remote file
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.4.1.5ColumnchasSupervisionRfsLsFileTyperead-onlycurrentThe Type of a remote file
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.4.1.6ColumnchasSupervisionRfsLsFileSizeread-onlycurrentsize of this remote file
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.4.1.7ColumnchasSupervisionRfsLsFileAttrread-onlycurrentattributes of this remote file
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.4.1.8ColumnchasSupervisionRfsLsFileDateTimeread-onlycurrentthe modification date and time of a remote file
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.5IdentityalcatelIND1ChassisSupervisionRfsCommandscurrentBranch For Chassis Supervision RFS commands. For rrm command the Slot, Command and SrcFileName are mandatory. For rcp command the Slot, Command, SrcFileName an…
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.5.1ScalarchasSupervisionRfsCommandsSlotread-createcurrentSlot where RFS command should be executed.
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.5.2ScalarchasSupervisionRfsCommandsCommandread-createcurrentThis object identifies which of the above Actions is to be performed. The commands are as follows: - rrm Remote file remove - rcp Remote file copy - rls Remote…
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.5.3ScalarchasSupervisionRfsCommandsSrcFileNameread-createcurrentThe remote file for where the RFS action is executed. This includes also the path so directory name and file name. This object is used when command set to rrm …
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.5.4ScalarchasSupervisionRfsCommandsDestFileNameread-createcurrentThe destination file for where the RFS action is executed. This includes also the path so directory name and file name. This object is used when command set to…
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.5.5ScalarchasSupervisionRfsCommandsRlsDirNameread-createcurrentThe remote directory name where remote file is located in. This is used when command set to rls.
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.5.6ScalarchasSupervisionRfsCommandsRlsFileNameread-createcurrentThe remote file name where remote file is located in. This is used when command set to rls.
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.5.7ScalarchasSupervisionRfsCommandsProcessingStateread-onlycurrentcommand executing state for the previous set operation.
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.5.8ScalarchasSupervisionRfsCommandsStatusCoderead-onlycurrentcommand completetion status error code.
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.6TablechasControlReloadStatusTablenot-accessiblecurrentTable containing reload status of each network interface slot or stack module
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.6.1RowchasControlReloadEntrynot-accessiblecurrentEntry of a network interface reload status
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.6.1.1ColumnchasControlReloadIndexnot-accessiblecurrentEntry of a network interface reload status
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.6.1.2ColumnchasControlReloadStatusread-onlycurrentReturned value indicates if the network interface module is enabled or disabled for reload.
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.7NodechasGlobalControl
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.7.1ScalarchasGlobalControlDelayedResetAllread-writecurrentThis object is used to schedule a delayed reset all action. If set to -1 - cancel the timer, 0 - reset all immediately, any other value will start counting dow…
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.7.2ScalarchasGlobalControlLongCommandread-onlycurrentThis object is used to indicate whether a long-term action is in progress, and if so, what the action is.
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.7.3ScalarchasGlobalControlLongCommandStatusread-onlycurrentThis object it indicates the final disposition of the most recent long-term action.
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.8TablechasSupervisionRfsDfTablenot-accessiblecurrentThis table contains information about file system size and use.
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.8.1RowchasSupervisionRfsDfEntrynot-accessiblecurrentThis entry contains information about file system size and use.
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.8.1.1ColumnchasSupervisionRfsDfSlotnot-accessiblecurrentCMM Slot where flash space is evaluated. Slot index 1-16 will return slot 1-16 flash drive information. Slot index 17-32 will return slot 1-16 uflash drive inf…
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.8.1.2ColumnchasSupervisionRfsDfFlashFreeread-onlycurrentNumber bytes free on the file system.
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.8.1.3ColumnchasSupervisionRfsDfFlashSizeread-onlycurrentNumber of total bytes on the file system.
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.9TablechasSupervisionFlashMemTablenot-accessiblecurrentThis table contains the systems flash memory information.
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.9.1RowchasSupervisionFlashMemEntrynot-accessiblecurrentThis contains one entry for the flash memory table.
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.9.1.1ColumnchasSupervisionSlotnot-accessiblecurrentCMM Slot where flash space is evaluated.
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.9.1.2ColumnchasSupervisionFlashSizeread-onlycurrentFlash memory size.
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.9.1.3ColumnchasSupervisionFlashFreeread-onlycurrentNumber bytes free on file system.
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.9.1.4ColumnchasSupervisionFlashUsedread-onlycurrentA rounded up percentage of Flash Memory used.
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.10TablechasSupervisionCmmCertifiedTablenot-accessiblecurrentThis table contains...
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.10.1RowchasSupervisionCmmCertifiedEntrynot-accessiblecurrentInformation about...
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.10.1.1ColumnchasSupervisionCmmNumnot-accessiblecurrentCMM Slot where /certified directory is evaluated.
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.10.1.2ColumnchasSupervisionCmmCertifiedStatusread-onlycurrentThe status of the CMM certified directory - certified or not.
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.11TablealaChasEntPhysFanTablenot-accessiblecurrentThis table contains one row per physical fan entity.
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.11.1RowalaChasEntPhysFanEntrynot-accessiblecurrentInformation about a particular fan in a chassis physical entity.
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.11.1.1ColumnalaChasEntPhysFanLocalIndexnot-accessiblecurrentIndex to a chassis fan entity
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.11.1.2ColumnalaChasEntPhysFanStatusread-onlycurrentChassis fan operational status
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.12ScalaralaChasHashModeread-writecurrentWhen set to brief, Hash mode is enabled. When set to Extended, Hash mode is disabled.
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.13ScalaralaChasUdpTcpPortModeread-writecurrentThe control is used to enable or disable UDP TCP port hashing. This option is applicable only when Hash mode is set to disabled (i.e. extended)
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.14ScalaralaChasNonUCHashControlread-writecurrentThis control is used to enable/disable Load balance for non unicast traffic.
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.15ScalaralaChasIssuForStackablesStatusread-onlycurrentThis object contains the status of ISSU. Enabled: Issu is in progress Disabled: Issu has not been started yet Aborted: Issu was aborted Successfull: ISSU was s…
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.16ScalaralaChasIssuForStackablesSlotsUpgradedread-onlycurrentThis object contains the slot numbers that have been upgraded by ISSU.
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.17ScalaralaChasIssuForStackablesSlotInProgressread-onlycurrentThis object contains the slot number for which upgradation is in progress.
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.18ScalaralaChasIssuForStackablesSlotsLeftread-onlycurrentThis object contains the slot numbers for which upgradation is still left.
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.19ScalaralaChasFdbHashModeread-writecurrentwhen set to xor, the hash configuration mode is set to default xor-mode. when set to crc, the hash configuration mode is set to crc-mode.
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.21ScalaralaChasNonUCHashModeread-writecurrentWhen set to brief, Hashing is based on SIP. When set to normal, Hashing is based on SIP and DIP. When set to Extended, Hashing is based on SIP, DIP and Mode po…
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.22ScalaralaChasBpsUpdateFirmwareread-writecurrentThis object is used to start BPS firmware update.
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.23ScalaralaChasBpsModeread-writecurrentThis object is only applicable to BPS .Value is used to specify current Mode of switch.
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.24ScalaralaChasBpsSystemTotalAvailablePowerread-onlycurrentThis value is only applicable to the BPS Module. It corresponds to system total power available on BPS This value is in Watts.
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.25ScalaralaChasBpsSystemTotalAllocationread-onlycurrentThis value is only applicable to the BPS Modules. It corresponds to total system power allocated by BPS This value is in Watts.
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.26ScalaralaChasBpsPoeTotalAvailablePowerread-onlycurrentThis value is only applicable to the BPS Modules. It corresponds to system total power available on BPS This value is in Watts.
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.27ScalaralaChasBpsPoeTotalAllocationread-onlycurrentThis value is only applicable to the Bps Modules. It corresponds to total POE power allocated by BPS This value is in Watts.
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.28ScalaralaChasBpsCpldRevread-onlycurrentThis object contains the CPLD revision Number of the BPS
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.29ScalaralaChasBpsMmcuRevread-onlycurrentThis object contains the MMCU revision Number of the BPS
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.30ScalaralaChasBpsCmcuRevread-onlycurrentThis object contains the CMCU revision Number of the BPS
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.31TablealaChasBpsTablenot-accessiblecurrentThis table contains BPS connector priority for each slot
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.31.1RowalaChasBpsEntrynot-accessiblecurrentInformation about bps connector priority for each slot
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.31.1.1ColumnalaChasBpsNiNumnot-accessiblecurrentNumbers allocated for the stack NIs as follows: - 1..8: valid and assigned slot numbers corresponding to values from the entPhysicalTable
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.31.1.2ColumnalaChasBpsConnectorPriorityread-writecurrentThis object specifies the bps connector priority.
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.31.1.3ColumnalaChasBpsConnectorNumread-onlycurrentThis object specifies the bps connector num.
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.32TablealaChasBpsPowerSupplyTablenot-accessiblecurrentThis table contains BPS power supplies details
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.32.1RowalaChasBpsPowerSupplyEntrynot-accessiblecurrentInformation about a particular BPS power supply
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.32.1.1ColumnalaChasBpsPowerSupplyIndexnot-accessiblecurrentThis value hold BPS power power supply Index
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.32.1.2ColumnalaChasBpsPowerSupplyNameread-onlycurrentThis object hold name of BPS power supply
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.32.1.3ColumnalaChasBpsPowerSupplyDescrread-onlycurrentThis object hold description of BPS power supply
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.32.1.4ColumnalaChasBpsPowerSupplyModuleTyperead-onlycurrentThis object is unique module Type or ID from BPS entities eeprom
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.32.1.5ColumnalaChasBpsPowerSupplyPartNumberread-onlycurrentThis object contains the BPS power supply Part Number
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.32.1.6ColumnalaChasBpsPowerSupplyHardwareRevread-onlycurrentThe vendor-specific hardware revision string for the BPS power supplies Note that if revision information is stored internally in a non-printable (e.g., binary…
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.32.1.7ColumnalaChasBpsPowerSupplySerialNumread-writecurrentThe vendor-specific serial number string for the BPS power supplies
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.32.1.8ColumnalaChasBpsPowerSupplyMfgDateread-onlycurrentThis object contains the manufacturing date of the BPS power supplies . Its format is mmm dd yyyy : NOV 27 2012.
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.32.1.9ColumnalaChasBpsPowerSupplyOperStatusread-onlycurrentOper status of BPS power supply
1.3.6.1.4.1.6486.800.1.1.1.3.1.1.32.1.10ColumnalaChasBpsPowerSupplyPowerProvread-onlycurrentIt corresponds to max power of BPS power supply. This value is in Watts.
1.3.6.1.4.1.6486.800.1.1.1.3.1.2IdentityalcatelIND1ChassisMIBConformancecurrentBranch For Chassis Supervision Chassis MIB Subsystem Conformance Information.
1.3.6.1.4.1.6486.800.1.1.1.3.1.2.1IdentityalcatelIND1ChassisMIBGroupscurrentBranch For Chassis Supervision Chassis MIB Subsystem Units Of Conformance.
1.3.6.1.4.1.6486.800.1.1.1.3.1.2.1.1GroupchasControlModuleGroupcurrentChassis Supervision Control Modules Group.
1.3.6.1.4.1.6486.800.1.1.1.3.1.2.1.2GroupchasControlRedundantGroupcurrentChassis Supervision Redundant Control Modules Group.
1.3.6.1.4.1.6486.800.1.1.1.3.1.2.1.3GroupchasChassisGroupcurrentChassis Supervision Chassis Group.
1.3.6.1.4.1.6486.800.1.1.1.3.1.2.1.4GroupchasControlReloadStatusGroupcurrentChassis Supervision NI Reload Status Control Modules Group.
1.3.6.1.4.1.6486.800.1.1.1.3.1.2.1.5GroupchasGlobalControlGroupcurrentChassis Supervision Global Control Modules Group.
1.3.6.1.4.1.6486.800.1.1.1.3.1.2.1.6GroupchassisNotificationGroupcurrentChassis Supervision Notification Group.
1.3.6.1.4.1.6486.800.1.1.1.3.1.2.1.7GroupalaChasEntPhysFanGroupcurrentChassis Supervision Physical Fan Group.
1.3.6.1.4.1.6486.800.1.1.1.3.1.2.1.8GroupalaChasHashControlGroupcurrentChassis Supervision Hash Control Group.
1.3.6.1.4.1.6486.800.1.1.1.3.1.2.1.9GroupalaChasNonUCHashControlGroupcurrentChasis Supervision non ucastHash Control Group.
1.3.6.1.4.1.6486.800.1.1.1.3.1.2.1.10GroupchasSupervisionCmmCertifiedStatusGroupcurrentCMM Slot where /certified directory evaluated Group.
1.3.6.1.4.1.6486.800.1.1.1.3.1.2.1.11GroupalaChasNotificationObjectGroupcurrentChassis Supervision Notification Object Group.
1.3.6.1.4.1.6486.800.1.1.1.3.1.2.1.12GroupalaChasHashModeGroupcurrentHash mode configuration group
1.3.6.1.4.1.6486.800.1.1.1.3.1.2.1.13GroupalaChasBpsGlobalGroupcurrentBPS objects global group
1.3.6.1.4.1.6486.800.1.1.1.3.1.2.1.14GroupalaChasBpsConnPriorityGroupcurrentBPS connector priority group
1.3.6.1.4.1.6486.800.1.1.1.3.1.2.1.15GroupalaChasBpsPowerSupplyGroupcurrentBPS Power Supply group.
1.3.6.1.4.1.6486.800.1.1.1.3.1.2.1.33NodealaIpArpConfig
1.3.6.1.4.1.6486.800.1.1.1.3.1.2.1.33.1ScalaralaIpArpLimitConfigread-writecurrentTo select ARP table size
1.3.6.1.4.1.6486.800.1.1.1.3.1.2.2IdentityalcatelIND1ChassisMIBCompliancescurrentBranch For Chassis Supervision Chassis MIB Subsystem Compliance Statements.
1.3.6.1.4.1.6486.800.1.1.1.3.1.2.2.1CompliancealcatelIND1ChassisMIBCompliancecurrentCompliance statement for Chassis Supervision.
1.3.6.1.4.1.6486.800.1.3.2.4.1NodechassisTrapsDesc
1.3.6.1.4.1.6486.800.1.3.2.4.1.0.1NotificationchassisTrapsStrcurrentA Software Trouble report is sent by whatever application encountering a problem during its execution and would want to aware the user of for maintenance purpo…
1.3.6.1.4.1.6486.800.1.3.2.4.1.0.2NotificationchassisTrapsAlertcurrentgeneric trap notifying something changed in the chassis whatever it's a failure or not
1.3.6.1.4.1.6486.800.1.3.2.4.1.0.3NotificationchassisTrapsStateChangecurrentA status change was detected
1.3.6.1.4.1.6486.800.1.3.2.4.1.0.6NotificationpoePowerBudgetChangecurrentIndicates that any further temperature increase will cause POE power budget rampdown.
1.3.6.1.4.1.6486.800.1.3.2.4.1.0.7NotificationchassisTrapsLowFlashSpacecurrentTrap notifying the user when the free flash space falls below the set minimum level
1.3.6.1.4.1.6486.800.1.3.2.4.1.0.8NotificationchassisTrapNiBPSLessAllocatedSytemPowercurrentInsufficient system power given by BPS
1.3.6.1.4.1.6486.800.1.3.2.4.1.0.9NotificationchassisTrapsBPSStateChangecurrentBPS power supplies insertion/removal trap
1.3.6.1.4.1.6486.800.1.3.2.4.1.0.10NotificationchassisTrapsNiBPSFETStateChangecurrentBPS power supplies FET state change trap
1.3.6.1.4.1.6486.800.1.3.2.4.2NodechassisTrapsObj
1.3.6.1.4.1.6486.800.1.3.2.4.2.1ScalarchassisTrapsStrLevelread-onlycurrentAn enumerated value which provides the urgency level of the STR.
1.3.6.1.4.1.6486.800.1.3.2.4.2.2ScalarchassisTrapsStrAppIDread-onlycurrentApplication Identification number
1.3.6.1.4.1.6486.800.1.3.2.4.2.3ScalarchassisTrapsStrSnapIDread-onlycurrentSubapplication Identification number. we can have multiple snapIDs per Subapplication (task) but only one is to be used to send STRs.
1.3.6.1.4.1.6486.800.1.3.2.4.2.4ScalarchassisTrapsStrfileNameread-onlycurrentName of the source file where the fault was detected. This is given by the C ANSI macro __FILE__. The path shouldn't appear.
1.3.6.1.4.1.6486.800.1.3.2.4.2.5ScalarchassisTrapsStrfileLineNbread-onlycurrentLine number in the source file where the fault was detected. This is given by the C ANSI macro __LINE__.
1.3.6.1.4.1.6486.800.1.3.2.4.2.6ScalarchassisTrapsStrErrorNbread-onlycurrentFault identificator. The error number identify the kind the detected fault and allow a mapping of the data contained in chassisTrapsdataInfo.
1.3.6.1.4.1.6486.800.1.3.2.4.2.7ScalarchassisTrapsStrcommentsread-onlycurrentcomment text explaning the fault.
1.3.6.1.4.1.6486.800.1.3.2.4.2.8ScalarchassisTrapsStrdataInforead-onlycurrentAdditional data provided to help to find out the origine of the fault. The contain and the significant portion are varying in accordance with chassisTrapsStrEr…
1.3.6.1.4.1.6486.800.1.3.2.4.2.9ScalarchassisTrapsObjectTyperead-onlycurrentenumerated value which provide the object type involved in the alert trap.
1.3.6.1.4.1.6486.800.1.3.2.4.2.10ScalarchassisTrapsObjectNumberread-onlycurrentnumber defining the order of the object in the set. EX: number of the considered fan or power supply. This intend to clarify as much as possible the location o…
1.3.6.1.4.1.6486.800.1.3.2.4.2.11ScalarchassisTrapsAlertNumberread-onlycurrentthis number identify the alert among all the possible chassis alert causes.
1.3.6.1.4.1.6486.800.1.3.2.4.2.12ScalarchassisTrapsAlertDescrread-onlycurrentdescription of the alert matching chassisTrapsAlertNumber
1.3.6.1.4.1.6486.800.1.3.2.4.2.13ScalarphysicalIndexread-onlycurrentThe Physical index of the involved object.
1.3.6.1.4.1.6486.800.1.3.2.4.2.16ScalarpoePowerBudgetChangeSlotread-onlycurrentSlot number on which PoE power budget changed.
1.3.6.1.4.1.6486.800.1.3.2.4.2.17ScalarpoePowerBudgetOldread-onlycurrentPoE power budget before the event.
1.3.6.1.4.1.6486.800.1.3.2.4.2.18ScalarpoePowerBudgetNewread-onlycurrentPoE power budget after the event.
1.3.6.1.4.1.6486.800.1.3.2.4.2.19ScalarpoePowerBudgetChangeReasonread-onlycurrentThe reason for PoE power budget change: userConfigured(1) tempThresholdCrossed(2) tempThresholdNormal (3) powerSupplyChanged(4) unknown (7): unknown
1.3.6.1.4.1.6486.800.1.3.2.4.2.20ScalarchassisFreeFlashSpaceread-onlycurrentThe amount of free space (in KBytes) available in the device indicated by PhysicalIndex.
1.3.6.1.4.1.6486.800.1.3.2.4.2.21ScalarchasNiRequestedBpsSystemPowerread-onlycurrentRequested system power from os-bps
1.3.6.1.4.1.6486.800.1.3.2.4.2.22ScalarchasNiGrantedBpsSystemPowerread-onlycurrentGranted system power from os-bps
1.3.6.1.4.1.6486.800.1.3.2.4.2.23ScalarchasTrapsBPSPowerSupplyread-onlycurrentvalue which provide bps power supply involved in the State change trap
1.3.6.1.4.1.6486.800.1.3.2.4.2.24ScalarchasTrapsBPSEventAlertread-onlycurrentenumerated value identifying alert
1.3.6.1.4.1.6486.800.1.3.2.4.2.25ScalarchasTrapsBPSSystemFETChangeread-onlycurrentenumerated value which indicate Fet state
1.3.6.1.4.1.6486.800.1.3.2.4.2.26ScalarchasTrapsBPSPoeFETChangeread-onlycurrentenumerated value which indicate Fet state
Type Definitions
NameSyntaxStatusDescription
ChasEntPhysLedINTEGER { notApplicable (0), off (1), greenOn (2), greenBlink (3), amberOn (4), amberBlink (5) }currentTextual convention for physical LEDs. Note: Due to European regulation, the LEDs will never be illuminated in red, but will be either green or amber.
ChasEntPhysPowerTypeINTEGER { notApplicable (0), ac (1), dc (2) } ChasEntPhysicalEntry ::= SEQUENCE { chasEntPhysAdminStatus INTEGER, chasEntPhysOperStatus INTEGER, chasEntPhysLedStatus BITS, chasEntPhysPower INTEGER, chasEntPhysModuleType SnmpAdminString, chasEntPhysMfgDate SnmpAdminString, chasEntPhysPartNumber SnmpAdminString, chasEntPhysLedStatusOk1 ChasEntPhysLed, chasEntPhysLedStatusOk2 ChasEntPhysLed, chasEntPhysLedStatusPrimaryCMM ChasEntPhysLed, chasEntPhysLedStatusSecondaryCMM ChasEntPhysLed, chasEntPhysLedStatusTemperature ChasEntPhysLed, chasEntPhysLedStatusFan ChasEntPhysLed, chasEntPhysLedStatusFan1 ChasEntPhysLed, chasEntPhysLedStatusFan2 ChasEntPhysLed, chasEntPhysLedStatusFan3 ChasEntPhysLed, chasEntPhysLedStatusBackupPS ChasEntPhysLed, chasEntPhysLedStatusInternalPS ChasEntPhysLed, chasEntPhysLedStatusControl ChasEntPhysLed, chasEntPhysLedStatusFabric ChasEntPhysLed, chasEntPhysLedStatusPSU ChasEntPhysLed, chasEntPhysAsicRev SnmpAdminString, chasEntPhysCpldRev SnmpAdminString, chasEntPhysDefaultMinibootRev SnmpAdminString, chasEntPhysBackUpMinibootRev SnmpAdminString, chasEntPhysBootromRev SnmpAdminString, chasEntPhysNiNum INTEGER, chasEntPhysGbicNum INTEGER, chasEntPhysWaveLen INTEGER, chasEntPhysUbootRev SnmpAdminString, chasEntPhysUbootMinibootRev SnmpAdminString, chasEntPhysMacAddress MacAddress, chasEntPhysPoeSwVersion SnmpAdminString, chasEntPhysC20LFailCont INTEGER, chasEntPhysCpuModel SnmpAdminString, chasEntPhysPowerType ChasEntPhysPowerType, chasEntPhysPowerControlChecksum SnmpAdminString, chasEntPhysDdmStatus INTEGER }currentTextual convention for type of power supply.
ChassisTrapsAlertNumberINTEGER { runningWorking (1), runningCertified (2), certifyStarted (3), certifyFlashSyncStarted (4), certifyCompleted (5), certifyFailed (6), synchroStarted (7), synchroCompleted (8), synchroFailed (9), restoreStarted (10), restoreCompleted (11), restoreFailed (12), takeoverStarted (13), takeoverDeferred (14), takeoverCompleted (15), macAllocFailed (16), macRangeFailed (17), fanFailed (18), fanOk (19), fansOk (20), tempOverThreshold (21), tempUnderThreshold (22), tempOverDangerThreshold (23), powerMissing (24), psNotOperational (25), psOperational (26), psAllOperational (27), redundancyNotSupported (28), redundancyDisabledCertifyNeeded (29), cmmStartingAsPrimary (30), cmmStartingAsSecondary (31), cmmStartupCompleted (32), cmmAPlugged (33), cmmBPlugged (34), cmmAUnPlugged (35), cmmBUnPlugged (36), lowNvramBattery (37), notEnoughFabricsOperational (38), simplexNoSynchro (39), secAutoActivate (40), secAutoCertifyStarted (41), secAutoCertifyCompleted (42), secInactiveReset (43), activateScheduled (44), activateStarted (45), getAfileCompleted (46), getAfileFailed (47), sysUpdateStart (48), sysUpdateInProgress (49), sysUpdateError (50), sysUpdateEnd (51), reloadInProgress (52), c20UpgradeOk (53), c20UpgradeFailed (54), c20RestoreOk (55), c20RestoreFailed (56), c20NiFailed (57) }currentthis number identify the alert among all the possible chassis alert causes.
ChassisTrapsObjectNumberINTEGER (0..255)currentA number defining the order of the object in the set. EX: The number of the considered fan or power supply. This intend to clarify as much as possible the location of the failure or alert. An instance of the appearance …
ChassisTrapsObjectTypeINTEGER { chassis (1), ni (2), powerSuply (3), fan (4), cmm (5), fabric (6), gbic (7) }currentAn enumerated value which provides the object type involved in the alert trap.
ChassisTrapsStrAppIDINTEGER (0..255)currentApplication Identification number
ChassisTrapsStrdataInfoOCTET STRING (SIZE (0..63))currentAdditional data provided to help to find out the origine of the fault. The contain and the significant portion are varying in accordance with chassisTrapsStrErrorNb. The lenght of this field is expressed in bytes.
ChassisTrapsStrErrorNbINTEGER (0..65535)currentFault identifier. The error number identifies the kind the detected fault and allows a mapping of the data contained in chassisTrapsdataInfo.
ChassisTrapsStrfileLineNbINTEGER (1..65535)currentLine number in the source file where the fault was detected. This is given by the C ANSI macro __LINE__.
ChassisTrapsStrLevelINTEGER { strNotFatal (1), strApplicationFatal (2), strFatal (3) }currentenumerated value which provide the urgency level of the STR.
ChassisTrapsStrSnapIDINTEGER (0..255)currentSubapplication Identification number. we can have multiple snapIDs per Subapplication (task) but only one is to be used to send STRs.
ChasTrapsBPSEventAlertINTEGER { notApplicable (0), bpsPsPlugged (1), bpsPsUnPlugged (2) }currentTextual convention for BPS event alert
ChasTrapsBPSFetStateINTEGER { notApplicable (0), on (1), off (2) }currentTextual convention for BPS FET state
ChasTrapsBPSPowerSupplyINTEGER { notApplicable (0), bpsSyspower1 (1), bpsSyspower2 (2), bpsPoepower1 (3), bpsPoepower2 (4), bpsPoepower3 (5) }currentTextual convention for type of bps power supply.
MIB Viewer