ALCATEL-IND1-DOT1X-MIB
157 objects
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): The Port Access Entity module for managing 802.1X for the Birds Of Prey Product Line The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
Imported Objects
| ALCATEL-IND1-BASE | softentIND1Dot1X |
| IEEE8021-PAE-MIB | dot1xPaePortNumber |
| IF-MIB | InterfaceIndex InterfaceIndexOrZero |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Integer32 IpAddress MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString MacAddress TEXTUAL-CONVENTION TimeStamp TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6486.800.1.2.1.30.1 | IdentityalcatelIND1Dot1XMIB | This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): The Port Access Entity … | ||
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1 | IdentityalaIND1Dot1XMIBObjects | current | Branch For 802.1X Subsystem Managed Objects. | |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.1 | TablealaDot1xPortTable | not-accessible | deprecated | A table of system level information for each port supported by the Port Access Entity. An entry appears in this table for each port of this system. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.1.1 | RowalaDot1xPortEntry | not-accessible | deprecated | TP DO: Add description here |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.1.1.1 | ColumnalaDot1xPortSlotNumber | read-only | deprecated | The slot that the logical port represented by the dot1xPaePortNumber resides. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.1.1.2 | ColumnalaDot1xPortPortNumber | read-only | deprecated | The user port that the logical port represented by the dot1xPaePortNumber resides. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.1.1.3 | ColumnalaDot1xPortMACAddress | read-only | deprecated | The MAC address of the supplicant that along with the slot and port uniquely form the logical port represented by the dot1xPaePortNumber. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.1.1.4 | ColumnalaDot1xPortVlan | read-only | deprecated | The vlan that the supplicant is authorized to access. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.1.1.5 | ColumnalaDot1xPortProtocol | read-only | deprecated | The protocol that is authorized for the supplicant. This is used in conjunction with the alaDot1xPortVlan object. Supplicant can be authorized to different vla… |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.1.1.6 | ColumnalaDot1xPortUserName | read-only | deprecated | The user name of the supplicant used for authentication. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.1.1.7 | ColumnalaDot1xPortState | read-only | deprecated | The State of the port. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.1.1.8 | ColumnalaDot1xSupplicantPolicyUsed | read-only | deprecated | Classification Policy under which the 802.1x supplicant is learned. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.1.1.9 | ColumnalaDot1xAuthFailReason | read-only | deprecated | Authentication Failure reasons for 802.1x supplicant client. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.1.1.10 | ColumnalaDot1xReAuthCount | read-only | deprecated | Authentication Retry Count for 802.1x supplicant client. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.1.1.11 | ColumnalaDot1xLastSuccessTime | read-only | deprecated | Last successful time when client is authenticated. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.2 | TablealaDot1xPortLookupTable | not-accessible | current | A table of which allows to find the logical port number given the physical slot/port/MAC. An entry appears in this table for each logical port of this system. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.2.1 | RowalaDot1xPortLookupEntry | not-accessible | current | The translation table to look up the dot1xPaePortNumber. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.2.1.1 | ColumnalaDot1xPortLookupSlotNumber | read-only | current | The slot that the logical port represented by the dot1xPaePortNumber resides. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.2.1.2 | ColumnalaDot1xPortLookupPortNumber | read-only | current | The physical port that the logical port represented by the dot1xPaePortNumber resides. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.2.1.3 | ColumnalaDot1xPortLookupMACAddress | read-only | current | The MAC address of the supplicant that along with the slot and port uniquely form the logical port represented by the dot1xPaePortNumber. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.2.1.4 | ColumnalaDot1xPortLookupInterfaceNumber | read-only | current | The ifIndex that represnets the slot and port where the dot1xPaePortNumber resides. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.4 | TablealaDot1xMacTable | not-accessible | current | Provide the list of users currently authenticated into the switch for bridging purpose. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.4.1 | RowalaDot1xMacEntry | not-accessible | current | An entry in the AaaAuthenticatedUserTable. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.4.1.1 | ColumnalaDot1xMACAddress | not-accessible | current | The MAC address of the supplicant that along with the slot and port uniquely form the logical port represented by the dot1xPaePortNumber. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.4.1.2 | ColumnalaDot1xMacIfIndex | read-only | current | Interface index in which alaDot1xMACAddress was learned. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.4.1.3 | ColumnalaDot1xMacSlotNumber | read-only | current | The slot in which alaDot1xMACAddress was learned. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.4.1.4 | ColumnalaDot1xMacPortNumber | read-only | current | The user port in which alaDot1xMACAddress was learned. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.4.1.5 | ColumnalaDot1xMacVlan | read-only | current | The vlan that the supplicant is authorized to access. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.4.1.6 | ColumnalaDot1xMacProtocol | read-only | current | The protocol that is authorized for the supplicant. This is used in conjunction with the alaDot1xMacVlan object. Supplicant can be authorized to different vlan… |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.4.1.7 | ColumnalaDot1xMacUserName | read-only | current | The user name of the supplicant used for authentication. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.4.1.8 | ColumnalaDot1xMacState | read-only | current | The State of the port in which the current mac-address was learned. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.4.1.9 | ColumnalaDot1xMacSupplicantPolicyUsed | read-only | current | Classification Policy under which the 802.1x supplicant is learned. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.4.1.10 | ColumnalaDot1xHicEnabledMAC | read-only | deprecated | Flag to notify that MAC has been classified based on HIC policy |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.5 | TablealaDot1xNonSupplicantTable | not-accessible | current | A table of non 802.1x supplicants learned on 802.1x authenticated ports. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.5.1 | RowalaDot1xNonSupplicantEntry | not-accessible | current | Non 802.1x supplicant information. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.5.1.1 | ColumnalaDot1xNonSupplicantIntfNum | read-only | current | The ifIndex represneting the slot and port where the non 802.1x supplicant is learned. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.5.1.2 | ColumnalaDot1xNonSupplicantMACAddress | read-only | current | The MAC address of the non 802.1x supplicant. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.5.1.3 | ColumnalaDot1xNonSupplicantVlanID | read-only | current | The Id of the VLAN on which the non 802.1x supplicant is learned. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.5.1.4 | ColumnalaDot1xNonSupplicantPolicyUsed | read-only | current | Classification policy under which the non 802.1x supplicant is learned. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.5.1.5 | ColumnalaDot1xAuthenticationStatus | read-only | current | Authentication status of the non 802.1x supplicant. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.5.1.6 | ColumnalaDot1xNonSupplicantHicEnabledMAC | read-only | current | Flag to specify whether non supplicant is classified based on HIC. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.6 | TablealaDot1xAuthPolicyTable | not-accessible | current | A table of supplicant and non supplicant device classification policies as they are configured on 802.1x authenticated ports. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.6.1 | RowalaDot1xAuthPolicyEntry | not-accessible | current | Device classification policies information. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.6.1.1 | ColumnalaDot1xAuthPolicyIntfNumber | not-accessible | current | The ifIndex that represnets the slot and port where the device classification policies are configured. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.6.1.2 | ColumnalaDot1xNonSuppPolicy | read-write | current | MAC based authentication -> M Group Mobility -> G VLAN ID -> <vlan id> Default VLAN -> D Block -> B Fail -> , Captive Portal -> C UNP -> '<String>' Examples: M… |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.6.1.3 | ColumnalaDot1xSuppPolicy | read-write | current | 802.1x authentication -> X Group Mobility -> G VLAN ID -> <vlan id> Default VLAN -> D Block -> B Fail -> , Captive Portal -> C Mac-authentication -> F UNP -> '… |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.6.1.4 | ColumnalaDot1xPollingCnt | read-write | current | Number of retries to poll the end station for EAPoL frame before classifying the end station with group mobility or guest vlan ID configured. If the value is s… |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.6.1.5 | ColumnalaDot1xCaptivePortalPolicy | read-write | current | Web authentication -> W Group Mobility -> G VLAN ID -> <vlan id> Default VLAN -> D Block -> B Fail -> , Default value: XGD,B, if string size is zero, the defau… |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.6.1.6 | ColumnalaDot1xCPortalSessionLimit | read-write | current | Captive Portal Session limit is the interval that a Captive Portal user can login. User is to be logged off after the session limit. If the session limit is se… |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.6.1.7 | ColumnalaDot1xCPortalRetryCnt | read-write | current | Number of retries for the Captive Portal user to provide the user credential before the software will classify the user to the failed policy according the the … |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.6.1.8 | ColumnalaDot1xSupplicantBypass | read-write | current | Supplicant Bypass configuration Status. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.6.1.9 | ColumnalaDot1xSBAllowEAP | read-write | current | Supplicant Bypass Allow EAP configuration. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.6.1.10 | ColumnalaDot1xCPortalInactivityLogout | read-write | current | Captive portal inactivity logout entry. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.7 | NodealaDot1xCportalConfig | |||
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.7.1 | ScalaralaDot1xCPortalIpAddress | read-write | current | The factory default Captive Portal IP address is 10.123.0.1. If the 10.123.0.0 subnet is already in use, user can change the Captive Portal IP address to anoth… |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.7.2 | ScalaralaDot1xCPortalProxyURL | read-write | current | The factory default for Captive Portal working with proxy server url has the key word proxy. If the user's proxy server url does not have the key work proxy, u… |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.7.3 | ScalaralaDot1xCPortalPostAuthSuccessRedirectURL | read-write | current | Captive Portal's Redirect URL upon successful authentication. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.7.4 | ScalaralaDot1xCPortalPostAuthFailRedirectURL | read-write | current | Captive Portal's Redirect URL upon failed authentication. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.7.5 | ScalaralaDot1xCPortalDNSKeyword1 | read-write | current | Captive Portal's DNS keyword string. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.7.6 | ScalaralaDot1xCPortalDNSKeyword2 | read-write | current | Captive Portal's DNS keyword string. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.7.7 | ScalaralaDot1xCPortalDNSKeyword3 | read-write | current | Captive Portal's DNS keyword string. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.7.8 | ScalaralaDot1xCPortalDNSKeyword4 | read-write | current | Captive Portal's DNS keyword string. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.7.9 | ScalaralaDot1xCPortalProxyPort | read-write | current | Captive Portal's user defined proxy port number. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.7.10 | ScalaralaDot1xCPortalRedirectString | read-write | current | Captive Portal redirect url key string. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.8 | TablealaDot1xDeviceStatusTable | not-accessible | current | A table of system level information for each port supported by the Port Access Entity. An entry appears in this table for each port of this system. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.8.1 | RowalaDot1xDeviceStatusEntry | not-accessible | current | One entry of the Device Status Table. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.8.1.1 | ColumnalaDot1xDeviceStatusMacQueryType | read-only | current | The type of MAC address to query. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.8.1.2 | ColumnalaDot1xDeviceStatusSlotNumber | read-only | current | The slot that the device reporting the status resides. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.8.1.3 | ColumnalaDot1xDeviceStatusPortNumber | read-only | current | The user port that the device reporting the status resides. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.8.1.4 | ColumnalaDot1xDeviceStatusMACAddress | read-only | current | The MAC address of the device reporting the status. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.8.1.5 | ColumnalaDot1xDeviceStatusDeviceType | read-only | current | The type of device. Either supplicant or non-supplicant. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.8.1.6 | ColumnalaDot1xDeviceStatusVlan | read-only | current | The vlan that the device reporting the status is authorized to access. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.8.1.7 | ColumnalaDot1xDeviceStatusIPAddress | read-only | current | The IP address of the device reporting the status. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.8.1.8 | ColumnalaDot1xDeviceStatusUserName | read-only | current | The user name of the device reporting the status. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.8.1.9 | ColumnalaDot1xDeviceStatusProfileUsed | read-only | current | The name of the User Network Profile entry used when the device reporting the status is classified. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.8.1.10 | ColumnalaDot1xDeviceStatusAuthType | read-only | current | The type of authentication used by the device reporting the status to obtain network access. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.8.1.11 | ColumnalaDot1xDeviceStatusPolicyUsed | read-only | current | Classification Policy under which the device is learned. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.8.1.12 | ColumnalaDot1xDeviceStatusAuthResult | read-only | current | The State of the port. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.8.1.13 | ColumnalaDot1xDeviceStatusMacLearntState | read-only | current | The State of the MAC classified in the switch. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.8.1.14 | ColumnalaDot1xDeviceStatusTimeLearned | read-only | current | The time that the MAC address is learned in the system. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.8.1.15 | ColumnalaDot1xDeviceStatusCaptivePortalUsed | read-only | current | The object indicates if the device is classified in the system using Captive Portal. A value of True means that the device has used Captive Portal to authentic… |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.8.1.16 | ColumnalaDot1xDeviceStatusHicResult | read-only | current | The Hic result of the device reporting the status is authorized to access. Default value is 0, indicates HIC process has not started |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.9 | NodealaDot1xAdminLogoutParams | |||
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.9.1 | ScalaralaDot1xAdminLogoutType | read-write | current | When this variable is set, the switch is to logout the user based on the logout type. The associated MIB object should be correctly set based on the logout typ… |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.9.2 | ScalaralaDot1xAdminLogoutMacAddress | read-write | current | This value is used only if alaDot1xAdminLogoutType is set to MAC address. The default value is set to ff:ff:ff:ff:ff:ff. This well know broadcast MAC address w… |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.9.3 | ScalaralaDot1xAdminLogoutUserName | read-write | current | This value is used only if alaDot1xAdminLogoutType is set to username. The default is a NULL string. The switch will reset this to the default value after the … |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.9.4 | ScalaralaDot1xAdminLogoutNetworkProfileName | read-write | current | This value is used only if alaDot1xAdminLogoutType is set to networkprofilename. The default is a NULL string. The switch will reset this to the default value … |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.9.5 | ScalaralaDot1xAdminLogoutInterfaceId | read-write | current | This value is used only if alaDot1xAdminLogoutType is set to interfaceId. The default value is zero (0). The switch will reset this to the default value after … |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.10 | NodealaDot1xAuthServerTimeout | |||
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.10.1 | ScalaralaDot1xAuthSvrTimeoutPolicy | read-write | current | Block -> B User Network Profile -> 'user network profile name' Default value is B. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.10.2 | ScalaralaDot1xAuthSvrTimeoutReAuthPeriod | read-write | current | This is the time interval in second that the supplicant is to be classified according to the Auth Server Down Policy (alaDot1xAuthServerTimeoutPolicy). When th… |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.10.3 | ScalaralaDot1xAuthSvrTimeoutStatus | read-write | current | This object is to enable or disable the use of alaDot1xAuthSvrTimeoutPolicy, alaDot1xAuthSvrTimeoutVoicePolicy and alaDot1xAuthSvrTimeoutReAuthPeriod. Default … |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.10.4 | ScalaralaDot1xAuthSvrTimeoutVoicePolicy | read-write | current | None -> None User Network Profile -> 'user network profile name' Default value is None. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.10.5 | ScalaralaDot1xAuthSvrPollingStatus | read-write | current | This is object is to enable or disable the radius server polling feature. Default is disabled. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.10.6 | ScalaralaDot1xAuthSvrDownMacPersistency | read-write | current | This is the object to enable or disable the functionality to stop flushing SL context of the mac when an Eap Start is received when the auth server down is ena… |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.10.7 | ScalaralaDot1xDelayLearningPeriod | read-write | current | This is the time interval in seconds that is sent to all NIs for delaying authentication process after reboot. The default value is 120 seconds. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.11 | NodealaPassthroughConfig | |||
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.11.1 | ScalaralaDot1xPassthroughStatus | read-write | current | Passthrough of 802.1x packets. Force the 802.1x packet to flood in the VLAN. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.11.2 | ScalaralaAvlanPassthroughStatus | read-write | current | Passthrough of AVLAN packets. Force the AVLAN packet to flood in the VLAN. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.11.3 | ScalaralaCportalPassthroughStatus | read-write | current | Passthrough of CAPITIVE packets. Force the AVLAN packet to flood in the VLAN. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.12 | TablealaKerberosPortTable | not-accessible | current | A table of 802.1x ports which are configured as Kerberos enabled/disabled ports. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.12.1 | RowalaKerberosPortEntry | not-accessible | current | Kerberos Port Information. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.12.1.1 | ColumnalaKerberosPortIfIndex | not-accessible | current | Interface index of the port on which Kerberos is configured. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.12.1.2 | ColumnalaKerberosPortStatus | read-write | current | Kerberos status on Port. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.13 | TablealaDot1xCrlUnpTable | not-accessible | current | Current Rate Limit Table On 8021x Port |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.13.1 | RowalaDot1xCrlUnpEntry | not-accessible | current | Current Rate Limit Table entry on a 8021X port. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.13.1.1 | ColumnalaDot1xCrlIfIndex | not-accessible | current | The ifIndex of the port. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.13.1.2 | ColumnalaDot1xCrlIngBw | read-only | current | Current Ingress BW active on 8021x Port in Kbps. Default value is -1 which means no Ingress Bandwidth exist on port. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.13.1.3 | ColumnalaDot1xCrlEgrBw | read-only | current | Current Egress BW active on 8021x Port in Kbps. Default value is -1 which means no Egress Bandwidth exist on port. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.13.1.4 | ColumnalaDot1xCrlIngTypeFlag | read-only | current | Application responsible for setting Ingress BW on port. Default is - which means no application has set BW on port. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.13.1.5 | ColumnalaDot1xCrlEgrTypeFlag | read-only | current | Application responsible for setting Egress BW on port. Default is - which means no application has set BW on port. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.13.1.6 | ColumnalaDot1xCrlDefDepth | read-only | current | Latest Default Depth applied on port. Default depth is -1 which means no depth is configured. BW is programmed with default optimal depth. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.13.1.7 | ColumnalaDot1xCrlIngProfile | read-only | current | The name of the UNP Profile Name responsible for setting current Ingress Bandwidth limitation on port. Applicable only if current bandwidth set is due to UNP c… |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.13.1.8 | ColumnalaDot1xCrlEgrProfile | read-only | current | The name of the UNP Profile Name responsible for setting current Egress Bandwidth limitation on port. Applicable only if current bandwidth set is due to UNP cl… |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.14 | TablealaRedirectByodHostTable | not-accessible | current | This table shows list of BYOD Hosts and their progress status. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.14.1 | RowalaRedirectByodHostEntry | not-accessible | current | BYOD Hosts status information. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.14.1.1 | ColumnalaByodHostStateQueryType | read-only | current | The type of the mac address whether supplicant or non-supplicant. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.14.1.2 | ColumnalaByodHostStateSlotNumber | read-only | current | The slot Number. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.14.1.3 | ColumnalaByodHostStatePortNumber | read-only | current | The port number. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.14.1.4 | ColumnalaByodHostStateMacAddress | read-only | current | The Client MAc Address which is Index. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.14.1.5 | ColumnalaByodHostStateDeviceType | read-only | current | To find the device either supplicant or non-supplicnat. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.14.1.6 | ColumnalaByodHostProgressStatus | read-only | current | The status of the BYOD Host. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.15 | TablealaRedirectByodHostUnpTable | not-accessible | current | This table shows list of BYOD Hosts with restricted and new UNP status. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.15.1 | RowalaRedirectByodHostUnpEntry | not-accessible | current | BYOD Client UNP information. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.15.1.1 | ColumnalaByodClientMacQueryType | read-only | current | The type of MAC address whether supplicant or non-supplicant. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.15.1.2 | ColumnalaByodClientSlotNumber | read-only | current | The slot number. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.15.1.3 | ColumnalaByodClientPortNumber | read-only | current | The port number. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.15.1.4 | ColumnalaByodClientMacAddress | read-only | current | The Client MAc Address which is Index. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.15.1.5 | ColumnalaByodClientDeviceType | read-only | current | To find the device either supplicant or non-supplicnat. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.15.1.6 | ColumnalaByodPreviousUNP | read-only | current | The UNP assigned to the clinet when BYOD is in progress. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.15.1.7 | ColumnalaByodNewUNP | read-only | current | The redirect UNP assigned to client once bYOD complete. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.1.15.1.8 | ColumnalaByodCOAStatus | read-only | current | BYOD status of each BYOD Host. |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.2 | IdentityalaIND1Dot1XMIBConformance | current | Branch For 802.1X Subsystem Conformance Information. | |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.2.1 | IdentityalaIND1Dot1XMIBGroups | current | Branch For 802.1X Subsystem Units Of Conformance. | |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.2.1.1 | GroupalaINDDot1XPortGroup | current | Collection of 802.1x objects for port status. | |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.2.1.2 | GroupalaDot1xPortLookupGroup | current | Collection of 802.1x objects for port lookup. | |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.2.1.3 | GroupalaINDDot1XPolicyGroup | current | Collection of 802.1x objects for supplicant and non-supplicant policies. | |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.2.1.4 | GroupalaINDDot1XDeviceStatusGroup | current | Collection of 802.1x objects for the status of the devices on an 802.1X enable port. | |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.2.1.5 | GroupalaDot1xAuthSvrTimeoutGroup | current | Collection of 802.1x objects for the Authentication Server Timeout. | |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.2.1.6 | GroupalaPassthroughConfigGroup | current | Status of passthrough for 802.1x and avlan configuration in devices. | |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.2.1.7 | GroupalaDot1xAdminLogoutParamsGroup | current | Dot1x Admin Logout Parameters group. | |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.2.1.8 | GroupalaDot1xNonSupplicantEntryGroup | current | non 802.1x supplicants learned on 802.1x authenticated ports. | |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.2.1.9 | GroupalaDot1xCportalConfigGroup | current | Captive portal Config Group. | |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.2.1.10 | GroupalaDot1xMacEntryGroup | current | Captive portal Config Group. | |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.2.1.11 | GroupalaKerberosPortGroup | current | Kerberos Snooping Config Group. | |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.2.1.12 | GroupalaDot1xCrlUnpStatusGroup | current | Status of Current Ingress and Egress BW rate limitation present on 8021x port. | |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.2.1.13 | GroupalaINDDot1XRedirectByodHostGroup | current | Collection of BYOD clients and its status. | |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.2.1.14 | GroupalaINDDot1XRedirectByodHostUnpGroup | current | Collection of BYOD clients UNP and BYOD status. | |
| 1.3.6.1.4.1.6486.800.1.2.1.30.1.2.2 | CompliancealaIND1Dot1XMIBCompliances | current | Compliance statement for Alcatel 802.1x. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| ALADot1xAuthenticationResult | INTEGER { notApplicable (0), inProgress (1), success (2), fail (3) } | current | The result of the authentication. If the ALADot1xAuthenticationType of this device is noAuthentication then this object will return notApplicable. If the authentication has not completed then this object will return inP… |
| ALADot1xAuthenticationType | INTEGER { noAuthentication (0), dotXAuthentication (1), macAuthentication (2), captivePortal (3) } | current | The type of authentication used |
| ALADot1xClassificationPolicyType | INTEGER { dotXAuthentication (0), macAuthentication (1), groupMobilityRules (2), vlanId (3), defaultVlan (4), block (5), internalUseOnlyA (6), internalUseOnlyB (7), internalUseOnlyC (8), captivePortalAuthentication (9), captivePortalGroupMobility (10), captivePortalDefaultVlan (11), captivePortalVlanId (12), captivePortalBlock (13), captivePortalUnknown (14), captivePortalUnpAuthSrv (15), captivePortalUnpUsrCfg (16), captivePortalUnpAAArule (17), authServerUNP (18), userConfigUNP (19), aaaRuleUNP (20), aaaAuthSvrDownUNP (21), aaaAuthSvrDownBlock (22), aaaAuthSvrDownVpUnp (29) } | current | This policy type is the classification policy used to classify a device onto the system. |
| ALADot1xDeviceType | INTEGER { supplicant (1), nonSupplicant (2) } | current | The type of device. Either supplicant or non-supplicant. |
| ALADot1xHicFlag | INTEGER { enabled (1), disabled (2) } | current | Flag to specify whether MAC is classified based on HIC |
| ALADot1xMacLearntState | INTEGER { bridging (0), filtering (1), hicInProgress (2), qmrInProgress (3) } | current | The state of MAC address in the system |
| ALADot1xMacQueryType | INTEGER { all (0), supplicant (1), nonSupplicant (2), captivePortal (3) } | current | The query type of MAC address in the system. This query MAC address type is used to specify which type of MAC address to query from the alaDot1xDeviceStatusTable. |
| AlaPassThroughStatus | INTEGER { enabled(1), disabled(2) } | current | Admin status |