ALCATEL-IND1-E-SERVICE-MIB
190 objects
The parameters for configuration of the E-Service feature. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2006 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
Imported Objects
| ALCATEL-IND1-BASE | softentIND1eService |
| IF-MIB | InterfaceIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Integer32 MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString MacAddress RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6486.800.1.2.1.50.1 | IdentityalcatelIND1EServiceMIB | The parameters for configuration of the E-Service feature. The right to make changes in specification and other information contained in this document without … | ||
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1 | IdentityalcatelIND1eServiceMIBObjects | current | Branch For E-Service Managed Objects. | |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1 | NodealaEService | |||
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.1 | NodealaEServiceInfo | |||
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.1.1 | ScalaralaEServiceMode | read-write | current | The current mode configured for Vlan Stacking and Layer 2 tunnel configuration. legacyMode (1) indicates that the commands from AlcatelIND1VLANStacking.mib are… |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.1.2 | ScalaralaEServiceStatReset | read-write | current | Defines the global clear statistics control for ethernet-service counters. default(0) - default value for this object, reset(1) - indicates that all ethernet-s… |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.1.3 | ScalaralaEServiceL2MacTunnel | read-write | current | Controls the layer 2 Mac tunnel globaly. enable(1) - MAC tunneling is enabled globally. disable(2) - MAC tunneling is disabled globally. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.1.4 | ScalaralaEServiceUntaggedMode | read-write | current | Controls the status of cvlan on untagged frames feature globally. enable(1) - Untagged Mode is enabled globally. disable(2) - Untagged Mode is disabled globall… |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.2 | TablealaEServiceSapProfileTable | not-accessible | current | A table that contains service profiles containing performance and control attributes. An entry in this table is created when a new service profile is defined. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.2.1 | RowalaEServiceSapProfileEntry | not-accessible | current | A E-Service Service Profile entry. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.2.1.1 | ColumnalaEServiceSapProfileID | not-accessible | current | A label given to uniquely identify this profile. Must be at least one character long. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.2.1.2 | ColumnalaEServiceSapProfileCVLANTreatment | read-create | current | The type of VLAN stacking operation to be performed on a customer frame entering this service. Stack Svlan (1) indicates that the SVLAN is to be pre-pended on … |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.2.1.3 | ColumnalaEServiceSapProfileReplacementCVLAN | read-create | current | The CVLAN ID to use when using the Change CVLAN treatment mode. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.2.1.4 | ColumnalaEServiceSapProfilePriorityMapMode | read-create | current | This object describes the source of the value for the priority field of the SVLAN 802.1Q tag when pre-pended to the customer data frame. If set to notAssigned(… |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.2.1.5 | ColumnalaEServiceSapProfileFixedPriority | read-create | current | This object describes the value of the priority field of the 802.1Q SVLAN tag pre-pended to customer data frames when the fixed priority mapping mode is select… |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.2.1.6 | ColumnalaEServiceSapProfileIngressBW | read-create | current | This object describes this limit of ingress bandwidth for the traffic to which this profile is applied. If 0, no bandwidth limit is applied. This number repres… |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.2.1.7 | ColumnalaEServiceSapProfileBandwidthShare | read-create | current | This object describes the use of the bandwidth limit in how it is applied across multiple ports of the SAP. If set to notApplicable(0), the SAP is not used. If… |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.2.1.8 | ColumnalaEServiceSapProfileRowStatus | read-create | current | The status of this table entry. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.2.1.9 | ColumnalaEServiceSapProfileEgressBW | read-create | current | This object describes this limit of egress bandwidth for each UNI of the SAP to which this profile is applied. If 0, no bandwidth limit is applied. This number… |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.2.1.10 | ColumnalaEServiceSapProfileCIR | read-create | current | Committed Information Rate - bandwidth values in bits per second. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.2.1.11 | ColumnalaEServiceSapProfileCBS | read-create | current | Committed Burst Size - bucket size in byte. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.2.1.12 | ColumnalaEServiceSapProfilePIR | read-create | current | Peak Information Rate - bandwidth values in bits per second. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.2.1.13 | ColumnalaEServiceSapProfilePBS | read-create | current | Peak Burst Size - bucket size in byte. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.2.1.14 | ColumnalaEServiceSapProfileDepth | read-create | current | This object describes the depth limit. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3 | TablealaEServiceUNIProfileTable | not-accessible | current | A table that contains service profiles containing performance and control attributes. An entry in this table is created when a new service profile is defined. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1 | RowalaEServiceUNIProfileEntry | not-accessible | current | A E-Service Service Profile entry. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.1 | ColumnalaEServiceUNIProfileID | not-accessible | current | A label given to uniquely identify this profile. Must be at least one character long. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.2 | ColumnalaEServiceUNIProfileStpBpduTreatment | read-create | current | This object describes the behavior of the bridge in regards to the spanning tree protocol BPDU received on the UNI. Tunnel (1) enables the PDU to be tunneled a… |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.3 | ColumnalaEServiceUNIProfile8021xTreatment | read-create | current | This object describes the behavior of the bridge in regards to the IEEE 802.1x PDU frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across… |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.4 | ColumnalaEServiceUNIProfile8021ABTreatment | read-create | current | This object describes the behavior of the bridge in regards to the IEEE 802.1AB PDU frames received on the UNI. Tunnel (1) enables the PDU to be tunneled acros… |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.5 | ColumnalaEServiceUNIProfile8023adTreatment | read-create | current | This object describes the behavior of the bridge in regards to the IEEE 802.1ad PDU frames received on the UNI. Tunnel (1) enables the PDU to be tunneled acros… |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.6 | ColumnalaEServiceUNIProfileGvrpTreatment | read-create | current | This object describes the behavior of the bridge in regards to the GVRP PDU frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across the pr… |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.7 | ColumnalaEServiceUNIProfileAmapTreatment | read-create | current | This object describes the behavior of the bridge in regards to the Alcatel propietary AMAP PDU frames received on the UNI. Tunnel (1) enables the PDU to be tun… |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.8 | ColumnalaEServiceUNIProfileRowStatus | read-create | current | The status of this table entry. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.9 | ColumnalaEServiceUNIProfileMvrpTreatment | read-create | current | This object describes the behavior of the bridge in regards to the MVRP PDU frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across the pr… |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.10 | ColumnalaEServiceUNIProfileTunnelMac | read-create | current | This object specifies the tunnel mac used to tunnel L2 protocol to NNI ports |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.11 | ColumnalaEServiceUNIProfileLacpMarkerTreatment | read-create | current | This object describes the behavior of the bridge in regards to the LACP MARKER PDU frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across… |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.12 | ColumnalaEServiceUNIProfileOamTreatment | read-create | current | This object describes the behavior of the bridge in regards to the OAM PDU frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across the pro… |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.13 | ColumnalaEServiceUNIProfileCiscoPagpTreatment | read-create | current | This object describes the behavior of the bridge in regards to the PAGP PDU frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across the pr… |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.14 | ColumnalaEServiceUNIProfileCiscoUdldTreatment | read-create | current | This object describes the behavior of the bridge in regards to the UDLD PDU frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across the pr… |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.15 | ColumnalaEServiceUNIProfileCiscoCdpTreatment | read-create | current | This object describes the behavior of the bridge in regards to the CDC PDU frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across the pro… |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.16 | ColumnalaEServiceUNIProfileCiscoVtpTreatment | read-create | current | This object describes the behavior of the bridge in regards to the VTP PDU frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across the pro… |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.17 | ColumnalaEServiceUNIProfileCiscoDtpTreatment | read-create | current | This object describes the behavior of the bridge in regards to the DTP PDU frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across the pro… |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.18 | ColumnalaEServiceUNIProfileCiscoPvstTreatment | read-create | current | This object describes the behavior of the bridge in regards to the PVST PDU frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across the pr… |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.19 | ColumnalaEServiceUNIProfileCiscoVlanTreatment | read-create | current | This object describes the behavior of the bridge in regards to the VLAN PDU frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across the pr… |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.20 | ColumnalaEServiceUNIProfileCiscoUplinkTreatment | read-create | current | This object describes the behavior of the bridge in regards to the UPLINK PDU frames received on the UNI. Tunnel (1) enables the PDU to be tunneled across the … |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.3.1.21 | ColumnalaEServiceUNIProfileIeeeMacTreatment | read-create | current | This object describes the IEEEE Mac treatment unknown (0) the type is not defined. ieee-fwd-all(1) - Forwards all IEEE MAC's ieee-drop-all(2) - Discards all IE… |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.4 | TablealaEServiceTable | not-accessible | current | A table that contains the services and their assigned SVLAN for the E-Service feature. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.4.1 | RowalaEServiceEntry | not-accessible | current | The svlan/ipmvlan-port association. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.4.1.1 | ColumnalaEServiceID | not-accessible | current | A label given to uniquely identify this Service. Must be at least one character long. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.4.1.2 | ColumnalaEServiceSVLAN | read-create | current | The SVLAN number of the SVLAN chosen to the be transport for this service. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.4.1.3 | ColumnalaEServiceVlanType | read-create | current | The type of the vlan this service is going to attach to. When creating the service, the type should match the vlanId specified in the request. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.4.1.4 | ColumnalaEServiceRowStatus | read-create | current | The status of this table entry. The supported value for set are createAndGo (4) and destroy(6), to add or remove a service. When creating or deleting the servi… |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.4.1.5 | ColumnalaEServiceStatGreenCount | read-only | current | Counter for the number of packets/bytes being Green compliant (i.e. in case of srTCM and trTCM, packet is CIR/CBS compliant). |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.4.1.6 | ColumnalaEServiceStatYellowCount | read-only | current | Counter for the number of packets/bytes being Yellow compliant (i.e. in case of srTCM and trTCM, packet is PIR/PBS compliant). |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.4.1.7 | ColumnalaEServiceStatRedCount | read-only | current | Counter for the number of packets/bytes being Red compliant (i.e. in case of srTCM and trTCM, packet is neither CIR/CBS nor PIR/PBS compliant). |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.4.1.8 | ColumnalaEServiceStatTotalCount | read-only | current | Counter for the total number of packets/bytes (sum of Green, Yellow and Red counters). |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.5 | TablealaEServiceSapTable | not-accessible | current | A table that contains the Service Access Points (Sap) listed by ID. This table is used to create, delete, and modify the SAP's profile |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.5.1 | RowalaEServiceSapEntry | not-accessible | current | The list of SAP. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.5.1.1 | ColumnalaEServiceSapID | not-accessible | current | A Number given to uniquely identify the SAP. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.5.1.2 | ColumnalaEServiceSapServiceID | read-create | current | A label given to uniquely identify the Service this SAP is for. Must be at least one character long. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.5.1.3 | ColumnalaEServiceSapProfile | read-create | current | The string identifying the SAP Profile this sap is to use. If specified, must match an existing SAP Profile. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.5.1.4 | ColumnalaEServiceSapRowStatus | read-create | current | The status of this table entry. The supported value for set are createAndGo (4) and destroy(6), to add or remove a sap. When creating the sap, the user needs t… |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.6 | TablealaEServiceSapCvlanTable | not-accessible | current | A table that contains the Service Access Points (Sap) where the CVLANs are bound to their service. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.6.1 | RowalaEServiceSapCvlanEntry | not-accessible | current | The CVLAN to Sap binding. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.6.1.1 | ColumnalaEServiceSapCvlanSapID | not-accessible | current | A Number given to uniquely identify this SAP. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.6.1.2 | ColumnalaEServiceSapCvlanCvlan | not-accessible | current | This object is the CVLAN ID that this binding is targeted at. The CVLAN ID may be 0, which indicates an all or untagged only mapping type. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.6.1.3 | ColumnalaEServiceSapCvlanMapType | read-create | current | This object is the mapping type that defines what CVLANs are mapped into this service. Multiple mappings can be defined for CVLAN to service, however only one … |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.6.1.4 | ColumnalaEServiceSapCvlanRowStatus | read-create | current | The status of this table entry. The supported value for set are createAndGo (4) and destroy(6), to add or remove a SAP. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.7 | TablealaEServicePortTable | not-accessible | current | A table that contains the ports used by the EService feature. Both UNI and NNI are listed here. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.7.1 | RowalaEServicePortEntry | not-accessible | current | The list of ports being used by EService. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.7.1.1 | ColumnalaEServicePortID | not-accessible | current | The IfIndex of this UNI or NNI Port. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.7.1.2 | ColumnalaEServicePortType | read-write | current | The type of port for Vlan Stacking operation. uni (1) represents a customer facing port on which traffic may enter the E-Service. nni (2) respresents a provide… |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.7.1.3 | ColumnalaEServicePortVendorTpid | read-write | current | he TPID for this port if type is NNI. It is used for the incoming data traffic parsing and it is substituted to the 802.1Q standard Tpid for the outgoing data … |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.7.1.4 | ColumnalaEServicePortLegacyStpBpdu | read-write | current | The legacy STP BPDU treatment for this port if NNI. It defines the type of processing applied to STP legacy BPDUs on network ports. Legacy BPDU refer to conven… |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.7.1.5 | ColumnalaEServicePortLegacyGvrpPdu | read-write | current | The legacy GVRP PDU treatment for this port if NNI. It defines the type of processing applied to GVRP PDUs on network ports. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.7.1.6 | ColumnalaEServicePortUniProfile | read-write | current | The label of an existing UNI profile that which contains various properties to be applied to this port if UNI. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.7.1.7 | ColumnalaEServicePortTransBridging | read-write | current | The Transparent Bridging status for the nni Port. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.7.1.8 | ColumnalaEServicePortLegacyMvrpPdu | read-write | current | The legacy MVRP PDU treatment for this port if NNI. It defines the type of processing applied to MVRP PDUs on network ports. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.8 | TablealaEServiceSapUniTable | not-accessible | current | A table that contains the UNI that are bound to each SAP for classifying traffic into each EService. Not that writing to this table may create a new UNI. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.8.1 | RowalaEServiceSapUniEntry | not-accessible | current | The list of SAP-UNI bindings being used by EService. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.8.1.1 | ColumnalaEServiceSapUniSap | not-accessible | current | The SAP ID that is configured onto this port. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.8.1.2 | ColumnalaEServiceSapUniUni | not-accessible | current | The IfIndex of this UNI Port. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.8.1.3 | ColumnalaEServiceSapUniRowStatus | read-create | current | The status of this table entry. The supported value for set are createAndGo (4) and destroy(6), to add or remove a binding |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.8.1.4 | ColumnalaEServiceSapUniCvlan | not-accessible | current | Cvlan to be inserted for untagged frames incoming in this UNI Port if Cvlan insertion feature enabled else 0 |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.9 | TablealaEServiceNniSvlanTable | not-accessible | current | A table that contains the SVLANs bound to each NNI for use by the EService feature. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.9.1 | RowalaEServiceNniSvlanEntry | not-accessible | current | The list of NNI-SVLAN bindings being used by EService. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.9.1.1 | ColumnalaEServiceNniSvlanNni | not-accessible | current | The IfIndex of this NNI Port. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.9.1.2 | ColumnalaEServiceNniSvlanSvlan | not-accessible | current | The SVLAN bound to this port. SVLAN cannot be 1. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.9.1.3 | ColumnalaEServiceNniSvlanRowStatus | read-create | current | The status of this table entry. The supported value for set are createAndGo (4) and destroy(6), to add or remove a binding |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.9.1.4 | ColumnalaEServiceNniSvlanVpaType | read-create | current | The object is used to specify whether the VPA state is to be controlled by an ERP or a STP. By default VPA state is controlled by STP. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.10 | TablealaEServiceSapCvlanPortStatTable | not-accessible | current | A statistics table that contains the counters per SAP. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.10.1 | RowalaEServiceSapCvlanPortStatEntry | not-accessible | current | A E-Service Statistics Entry. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.10.1.1 | ColumnalaEServiceSapCvlanPortStatSapID | not-accessible | current | A Number given to uniquely identify the SAP. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.10.1.2 | ColumnalaEServiceSapCvlanPortStatCvlanID | not-accessible | current | This object is the CVLAN ID that this binding is targeted at. The CVLAN ID may be 0, which indicates an all or untagged only mapping type. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.10.1.3 | ColumnalaEServiceSapCvlanPortStatPortID | not-accessible | current | The IfIndex of this UNI Port. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.10.1.4 | ColumnalaEServiceSapCvlanPortStatGreenCount | read-only | current | Counter for the number of packets/bytes being Green compliant (i.e. in case of srTCM and trTCM, packet is CIR/CBS compliant) per UNI port, per CVLAN. This obje… |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.10.1.5 | ColumnalaEServiceSapCvlanPortStatYellowCount | read-only | current | Counter for the number of packets/bytes being Yellow compliant (i.e. in case of srTCM and trTCM, packet is PIR/PBS compliant) per UNI port, per CVLAN. This obj… |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.10.1.6 | ColumnalaEServiceSapCvlanPortStatRedCount | read-only | current | Counter for the number of packets/bytes being Red compliant (i.e. in case of srTCM and trTCM, packet is neither CIR/CBS nor PIR/PBS compliant) per UNI port, pe… |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.10.1.7 | ColumnalaEServiceSapCvlanPortStatTotalCount | read-only | current | Counter for the total number of packets/bytes (sum of Green, Yellow and Red counters) per UNI port, per CVLAN. This object is applicable only when ingress band… |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.11 | TablealaEServiceUNIProfileL2CustomProtocolTable | not-accessible | current | A table that contains l2 custom protocol entries with name and action associated to a uni profile. An entry in this table is created when an l2 custom protocol… |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.11.1 | RowalaEServiceUNIProfileL2CustomProtocolEntry | not-accessible | current | An E-Service Service Profile entry associated with l2 custom protocol entry. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.11.1.1 | ColumnalaEServiceL2CustomProtocolUNIProfileID | not-accessible | current | A label given to uniquely identify this profile. Must be at least one character long. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.11.1.2 | ColumnalaEServiceUNIProfileL2CustomProtocolID | not-accessible | current | Name of the L2 Custom protocol entry associated to UNI profile. Must be at least one character long. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.11.1.3 | ColumnalaEServiceUNIProfileL2CustomProtocolTreatment | read-create | current | This object describes the behavior of the bridge in regards to the destination Mac address matching with the L2 Custom protocol entry mac address on the UNI. T… |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.11.1.4 | ColumnalaEServiceUNIProfileL2CustomProtocolRowStatus | read-create | current | The status of this table entry. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.12 | TablealaEServiceL2CustomProtocolTable | not-accessible | current | A table that contains l2 custom protocol entries with name, Mac address, mask, ether type and ether sub type. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.12.1 | RowalaEServiceL2CustomProtocolEntry | not-accessible | current | An E-Service Service with l2 custom protocol entry. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.12.1.1 | ColumnalaEServiceL2CustomProtocolID | not-accessible | current | Name of the L2 Custom protocol entry which is an identifier to this table. Must be at least one character long. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.12.1.2 | ColumnalaEServiceL2CustomProtocolEntryType | read-create | current | This object specifies the custom L2 protocol entry type |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.12.1.3 | ColumnalaEServiceL2CustomProtocolMac | read-create | current | This object specifies the destination mac address that needs L2 protocol handling |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.12.1.4 | ColumnalaEServiceL2CustomProtocolMask | read-create | current | This object specifies the range of destination mac address that that needs L2 protocol handling |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.12.1.5 | ColumnalaEServiceL2CustomProtocolEtherType | read-create | current | Ether type value for generic ethertype. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.12.1.6 | ColumnalaEServiceL2CustomProtocolEtherSubType | read-create | current | if Ether type >1536 then the sub type is allowed to be configured |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.12.1.7 | ColumnalaEServiceL2CustomProtocolSsap | read-create | current | SSAP value for generic SSAP and SNAP rules, when Ether type < 1536 |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.12.1.8 | ColumnalaEServiceL2CustomProtocolDsap | read-create | current | DSAP value for generic DSAP and SNAP rules, when Ether type < 1536 |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.12.1.9 | ColumnalaEServiceL2CustomProtocolPid | read-create | current | protocol identifier in case of LLC SNAP packet |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.12.1.10 | ColumnalaEServiceL2CustomProtocolRowStatus | read-create | current | The status of this table entry. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.13 | TablealaEServiceUNIPortL2ProtocolStatisticsTable | not-accessible | current | A table, that contains UNI port L2 protocol frame statistics. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.13.1 | RowalaEServiceUNIPortL2ProtocolStatisticsEntry | not-accessible | current | An E-Service Service UNI port L2 protocol statistics entry associated with an L2 protocol and a port entry. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.13.1.1 | ColumnalaEServiceUNIPortID | not-accessible | current | The interface index of the UNI. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.13.1.2 | ColumnalaEServiceUNIPortL2ProtocolID | not-accessible | current | Name of the L2 protocol entry. Must be at least one character long. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.13.1.3 | ColumnalaEServiceUNIPortL2RxFrames | read-only | current | This object describes the total number of frames of this protocol received on this port and trapped to CPU. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.13.1.4 | ColumnalaEServiceUNIPortL2TunneledFrames | read-only | current | This object describes the total number of frames of this protocol received on this port trapped to CPU and tunneled. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.13.1.5 | ColumnalaEServiceUNIPortL2DroppedFrames | read-only | current | This object describes the total number of frames of this protocol received on this port trapped to CPU and dropped. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.13.1.6 | ColumnalaEServiceUNIPortL2PeeredFrames | read-only | current | This object describes the total number of frames of this protocol received on this port trapped to CPU and peered. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.13.1.7 | ColumnalaEServiceUNIPortL2MACTunneledFrames | read-only | current | This object describes the total number of frames of this protocol received on this port trapped to CPU and MAC tunneled. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.13.1.8 | ColumnalaEServiceUNIPortL2MACDeTunneledFrames | read-only | current | This object describes the total number of frames of this protocol received on this port trapped to CPU and MAC de-tunneled. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.13.1.9 | ColumnalaEServiceUNIPortL2LastSourceMAC | read-only | current | This object specifies the source MAC address of last frame of this protocol on this port trapped to CPU |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.14 | TablealaEServiceNNIPortL2ProtocolStatisticsTable | not-accessible | current | A table, that contains NNI port L2 protocol frame statistics. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.14.1 | RowalaEServiceNNIPortL2ProtocolStatisticsEntry | not-accessible | current | An E-Service NNI port L2 protocol statistics entry associated with port. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.14.1.1 | ColumnalaEServiceNNIPortID | not-accessible | current | The interface index of the NNI. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.14.1.2 | ColumnalaEServiceNNIPortL2RxMACTunneledFrames | read-only | current | This object describes the total number of frames trapped to CPU with tunnel MAC. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.14.1.3 | ColumnalaEServiceNNIPortL2MACTunneledDiscardFrames | read-only | current | This object describes the total number of discarded frames that are trapped to CPU with tunnel MAC. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.14.1.4 | ColumnalaEServiceNNIPortL2ClearStats | not-accessible | current | This object is used to clear the NNI port statistics of the interface. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.15 | TablealaEServiceUNIProfileL2ProtocolTotalStatisticsTable | not-accessible | current | A table, that contains UNI profile L2 protocol frame total RX statistics of all ports of the profile |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.15.1 | RowalaEServiceUNIProfileL2ProtocolTotalStatisticsEntry | not-accessible | current | An E-Service UNI profile L2 protocol total RX statistics entry associated with all ports of the UNI profile. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.15.1.1 | ColumnalaEServiceUNIProfile | not-accessible | current | A label given to uniquely identify this profile. Must be at least one character long. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.15.1.2 | ColumnalaEServiceUNIProfileL2ProtocolTotalRxFrames | read-only | current | This object describes the total number of frames L2 protocol frames received by all the ports of bind to this profile. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.15.1.3 | ColumnalaEServiceUNIProfileL2ProtocolClearStats | read-write | current | This object is used to clear the UNI profile statistics of the interface. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.16 | TablealaEServiceUNIProfileIEEEL2ProtocolStatisticsTable | not-accessible | current | A table, that contains UNI profile L2 well known protocol frame RX statistics of all ports of the profile |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.16.1 | RowalaEServiceUNIProfileIEEEL2ProtocolStatisticsEntry | not-accessible | current | An E-Service UNI profile L2 well known protocol RX statistics entry associated with all ports of the UNI profile. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.16.1.1 | ColumnalaEServiceUNIProfileIEEEL2ProfileID | not-accessible | current | A label given to uniquely identify this profile. Must be at least one character long. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.16.1.2 | ColumnalaEServiceUNIProfileIEEEL2ProtocolIndex | not-accessible | current | This object specifies the well known protocol group this row corresponds to. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.16.1.3 | ColumnalaEServiceUNIProfileIEEEL2ProtocolRxFrames | read-only | current | This object describes the number of frames this L2 well known protocol frames received by all the ports of bind to this profile. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.16.1.4 | ColumnalaEServiceUNIProfileIEEEL2ProtocolTreatment | read-only | current | This object describes the behavior of the bridge in regards to the destination Mac address matching with the L2 Custom protocol entry mac address on the UNI. T… |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.17 | TablealaEServiceUNIProfileCustomL2ProtocolStatisticsTable | not-accessible | current | A table, that contains UNI profile L2 protocol frame RX statistics of all ports of the profile. Each entry represents statistics collected for one protocol of … |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.17.1 | RowalaEServiceUNIProfileCustomL2ProtocolStatisticsEntry | not-accessible | current | An E-Service UNI profile L2 protocol RX statistics entry associated with all ports of the UNI profile. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.17.1.1 | ColumnalaEServiceUNIProfileCustomL2StatsProfileID | not-accessible | current | A label given to uniquely identify this profile. Must be at least one character long. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.17.1.2 | ColumnalaEServiceUNIProfileCustomL2ProtocolIndex | not-accessible | current | Name of the L2 protocol entry. Must be at least one character long. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.17.1.3 | ColumnalaEServiceUNIProfileCustomL2ProtocolRxFrames | read-only | current | This object describes the total number of frames of this protocol received on this port and trapped to CPU. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.17.1.4 | ColumnalaEServiceUNIProfileCustomL2ProtocolTreatment | read-only | current | This object describes the behavior of the bridge in regards to the destination Mac address matching with the L2 Custom protocol entry mac address on the UNI. T… |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.18 | NodealaEServiceL2PTProtocolStatisticsClear | |||
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.18.1 | ScalaralaEServiceUNIPortL2GlobalClearStatistics | read-write | current | Defines the global clear control for L2 protocol statistics of all UNI ports The value reset (1) indicates clear UNI port statistics of all ports in the system… |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.18.2 | ScalaralaEServiceNNIPortL2GlobalClearStatistics | read-write | current | Defines the global clear control for L2 protocol statistics of all NNI ports The value reset (1) indicates clear NNI port statistics of all ports in the system… |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.18.3 | ScalaralaEServiceUNIProfileL2GlobalClearStatistics | read-write | current | Defines the global clear control for L2 protocol statistics of all UNI profiles The value reset (1) indicates clear UNI profile statistics of all ports in the … |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.19 | TablealaEServiceUNIPortL2ProtocolStatisticsClearTable | not-accessible | current | A table, to clear UNI port L2 protocol frame statistics. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.19.1 | RowalaEServiceUNIPortL2ProtocolStatisticsClearEntry | not-accessible | current | An E-Service Service UNI port L2 protocol statistics clear entry associated with port. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.19.1.1 | ColumnalaEServiceUNIPortClearID | not-accessible | current | The interface index of the UNI. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.19.1.2 | ColumnalaEServiceUNIPortL2ClearStats | read-write | current | This object is used to clear the UNI port statistics of the interface. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.20 | TablealaEServiceNNIPortL2ProtocolStatisticsClearTable | not-accessible | current | A table, to clear NNI port L2 protocol frame statistics. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.20.1 | RowalaEServiceNNIPortL2ProtocolStatisticsClearEntry | not-accessible | current | An E-serive to clear NNI port L2 protocol frame statistics. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.20.1.1 | ColumnalaEServiceNNIPortClearID | not-accessible | current | The interface index of the NNI. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.1.1.20.1.2 | ColumnalaEServiceNNIPortL2ClearStatistics | read-write | current | This object is used to clear the NNI port statistics of the interface. |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.2 | IdentityalcatelIND1EServiceMIBConformance | current | Branch For E-Service Conformance Information. | |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.2.1 | IdentityalcatelIND1EServiceMIBGroups | current | Branch For E-Service Units Of Conformance. | |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.2.1.1 | GroupalaEServiceSapProfileGroup | current | Collection of objects for management of E-Service Sap Profiles. | |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.2.1.2 | GroupalaEServiceUNIProfileGroup | current | Collection of objects for management of EService UNI Profiles. | |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.2.1.3 | GroupalaEServiceGroup | current | Collection of objects for management of E-Services. | |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.2.1.4 | GroupalaEServiceSapGroup | current | Collection of objects for management of E-Service SAPs. | |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.2.1.5 | GroupalaEServiceSapCvlanGroup | current | Collection of objects for management of E-Service SAP CVLAN bindings. | |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.2.1.6 | GroupalaEServicePortGroup | current | Collection of objects for management of E-Service Ports. | |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.2.1.7 | GroupalaEServiceSapUniGroup | current | Collection of objects for management of E-Service SAP to UNI Binding. | |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.2.1.8 | GroupalaEServiceNniSvlanGroup | current | Collection of objects for management of E-Service SVLAN to NNI Binding. | |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.2.1.9 | GroupalaEServiceSapCvlanPortStatGroup | current | Collection of objects for srTCM and trTCM Counters. | |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.2.1.10 | GroupalaEServiceInfoGroup | current | Collection of E-Service Global Objects. | |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.2.1.11 | GroupalaEServiceUNIProfileL2CustomProtocolGroup | current | Collection of objects for management of E-Service UNI Profile to L2 Custom Protocol bindings. | |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.2.1.12 | GroupalaEServiceL2CustomProtocolGroup | current | Collection of objects for management of E-Service L2 Custom Protocol Group. | |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.2.1.13 | GroupalaEServiceUNIPortL2StatisticsGroup | current | Collection of objects for UNI port statistics management of E-Service L2 Tunneling Protocol Group. | |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.2.1.14 | GroupalaEServiceNNIPortL2StatisticsGroup | current | Collection of objects for NNI port statistics management of E-Service L2 Tunneling Protocol Group. | |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.2.1.15 | GroupalaEServiceUNIProfileL2ProtocolTotalStatisticsGroup | current | Collection of objects for UNI profile statistics management of E-Service L2 Tunneling Protocol Group. | |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.2.1.16 | GroupalaEServiceUNIProfileIEEEL2ProtocolStatisticsGroup | current | Collection of objects for UNI profile statistics for well known protocols of E-Service L2 Tunneling Protocol Group. | |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.2.1.17 | GroupalaEServiceUNIProfileL2ProtocolStatisticsGroup | current | Collection of objects for UNI profile statistics management of E-Service L2 Tunneling Protocol Group. | |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.2.1.18 | GroupalaEServiceL2PTProtocolStatisticsClearGroup | current | Collection of objects for UNI profile statistics management of E-Service L2 Tunneling Protocol Group. | |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.2.1.19 | GroupalaEServiceUNIPortL2StatisticsClearGroup | current | Collection of objects for UNI port statistics management of E-Service L2 Tunneling Protocol Group. | |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.2.1.20 | GroupalaEServiceNNIPortL2StatisticsClearGroup | current | Collection of objects for NNI port statistics management of E-Service L2 Tunneling Protocol Group. | |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.2.2 | IdentityalcatelIND1EServiceMIBCompliances | current | Branch For E-Service Compliance Statements. | |
| 1.3.6.1.4.1.6486.800.1.2.1.50.1.2.2.1 | CompliancealcatelIND1EServiceMIBCompliance | current | Compliance statement for E-Service. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AlaEServiceL2CustomProtocolType | INTEGER { maskType (1), macType (2), ssapdsapType (3), etherType (4), ethersubType (5) } alcatelIND1eServiceMIBObjects OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For E-Service Managed Objects." ::= { alcatelIND1EServiceMIB 1 } alcatelIND1EServiceMIBConformance OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For E-Service Conformance Information." ::= { alcatelIND1EServiceMIB 2 } alcatelIND1EServiceMIBGroups OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For E-Service Units Of Conformance." ::= { alcatelIND1EServiceMIBConformance 1 } alcatelIND1EServiceMIBCompliances OBJECT-IDENTITY STATUS current DESCRIPTION "Branch For E-Service Compliance Statements." ::= { alcatelIND1EServiceMIBConformance 2 } | current | The type of the custom L2 protocol entry is defined by this mib object. mask-type (1) - specifies a MAC+Mask entry mac-type (2) - specifies a MAC alone entry ssapdsap-type (3) - specifies a MAC+SSAP/DSAP+PID entry ether… |
| AlaEServiceUNIProfileProtocolTreatment | INTEGER { tunnel (1), drop (2), peer (3), macTunnel (4) } | current | The behavior of the bridge in regards to the given protocols packets received on the UNI. Tunnel (1) enables the packets to be tunneled across the provider network. Discard (2) causes the packets to be discarded and not… |