ALCATEL-IND1-IPX-MIB
78 objects
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): This is the proprietary MIB for the IPX routing sub-sytem. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
Imported Objects
| ALCATEL-IND1-BASE | routingIND1Ipx |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1 | IdentityalcatelIND1IPXMIB | This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): This is the proprietary… | ||
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1 | NodealcatelIND1IPXMIBObjects | |||
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.1 | IdentityalaIpxRoutingGroup | current | IPX routing information. | |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.1.1 | TablealaIpxStaticRouteTable | not-accessible | current | The Static Routes table is used and add entries and extract information from the static routes configured in the system. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.1.1.1 | RowalaIpxStaticRouteEntry | not-accessible | current | Each entry corresponds to one static route. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.1.1.1.1 | ColumnalaIpxStaticRouteNetNum | not-accessible | current | The IPX network number of the route's destination. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.1.1.1.2 | ColumnalaIpxStaticRouteNextHopNet | read-create | current | The IPX network number of the router used to reach the first hop in the static route. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.1.1.1.3 | ColumnalaIpxStaticRouteNextHopNode | read-create | current | The IPX node number of the router used to reach the first hop in the static route. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.1.1.1.4 | ColumnalaIpxStaticRouteTicks | read-create | current | The delay, in ticks, to reach the route's destination. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.1.1.1.5 | ColumnalaIpxStaticRouteHopCount | read-create | current | The number of hops necessary to reach the destination. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.1.1.1.6 | ColumnalaIpxStaticRouteRowStatus | read-create | current | The row status variable, used in accordance to installation and removal conventions for conceptual rows. The RowStatus of a currenty active row in the alaIpxSt… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.1.2 | TablealaIpxDefRouteTable | not-accessible | current | The default route table contains information about the destinations to which all packets are sent when the destination network is not known. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.1.2.1 | RowalaIpxDefRouteEntry | not-accessible | current | One table entry per switch for default route. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.1.2.1.1 | ColumnalaIpxDefRouteVlanId | not-accessible | current | The VlanId for this filter. If VlanId equals 0, the filter is applied globally. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.1.2.1.2 | ColumnalaIpxDefRouteNet | read-create | current | The IPX network number of the router used to reach the first hop in the default route. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.1.2.1.3 | ColumnalaIpxDefRouteNode | read-create | current | The IPX node number of the router used to reach the first hop in the default route. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.1.2.1.4 | ColumnalaIpxDefRouteRowStatus | read-create | current | The row status variable, used in accordance to installation and removal conventions for conceptual rows. The RowStatus of a currenty active row in the alaIpxDe… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.1.3 | TablealaIpxExtMsgTable | not-accessible | current | The extended RIP and SAP messages table contains information about which vlans use extended RIP and SAP packets. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.1.3.1 | RowalaIpxExtMsgEntry | not-accessible | current | One table entry per Vlan. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.1.3.1.1 | ColumnalaIpxExtMsgVlanId | not-accessible | current | The VlanId for this filter. If VlanId equals 0, the filter is applied globally. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.1.3.1.2 | ColumnalaIpxExtMsgMode | read-create | current | Indicates whether extended RIP/SAP packets are sent and received. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.1.3.1.3 | ColumnalaIpxExtMsgRowStatus | read-create | current | The row status variable, used in accordance to installation and removal conventions for conceptual rows. The RowStatus of a currenty active row in the alaIpxEx… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.1.4 | ScalaralaIpxFlush | read-write | current | Flushes the routing and the SAP tables. The tables will then be rebuilt from the broadcast messages received from the networks. Reading this variable is undefi… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2 | IdentityalaIpxFilterGroup | current | IPX filtering information. | |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.1 | TablealaIpxRipSapFilterTable | not-accessible | current | The IPX Rip/Sap Filter Table contains information about all filters that have been defined. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.1.1 | RowalaIpxRipSapFilterEntry | not-accessible | current | Each entry corresponds to one filter. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.1.1.1 | ColumnalaIpxRipSapFilterVlanId | not-accessible | current | The VlanId for this filter. If VlanId equals 0, the filter is applied globally. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.1.1.2 | ColumnalaIpxRipSapFilterType | not-accessible | current | The type of filter. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.1.1.3 | ColumnalaIpxRipSapFilterNet | not-accessible | current | The IPX Network Address to filter. A network address of all 0 's is used to denote All Networks. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.1.1.4 | ColumnalaIpxRipSapFilterNetMask | not-accessible | current | The IPX Network Mask to be used. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.1.1.5 | ColumnalaIpxRipSapFilterNode | not-accessible | current | The IPX node address to filter. A node address of all 0 's is used to denote All Nodes. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.1.1.6 | ColumnalaIpxRipSapFilterNodeMask | not-accessible | current | The IPX node address mask to be used. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.1.1.7 | ColumnalaIpxRipSapFilterSvcType | not-accessible | current | The SAP service type on which to filter. The SAP service types are defined by Novell.A value of ALL(65535) indicates that all services will be filtered. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.1.1.8 | ColumnalaIpxRipSapFilterMode | read-create | current | The action defined by this filter. block (1) means packets matching this filter will be blocked, and allow(0) means that packets matching this filter will be a… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.1.1.10 | ColumnalaIpxRipSapFilterRowStatus | read-create | current | The row status variable, used in accordance to installation and removal conventions for conceptual rows. The RowStatus of a currenty active row in the alaIpxRi… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.2 | TablealaIpxWatchdogSpoofTable | not-accessible | current | The IPX Watchdog Spoofing Table contains information about all of the current IPX WAN watchdog spoofing entry statuses. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.2.1 | RowalaIpxWatchdogSpoofEntry | not-accessible | current | Each entry corresponds to one WAN routing service. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.2.1.1 | ColumnalaIpxWatchdogSpoofVlanId | not-accessible | current | The VlanId of the WAN routing service that this entry applies to. If VlanId equals 0, the filter is applied globally to all WAN Vlans. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.2.1.2 | ColumnalaIpxWatchdogSpoofMode | read-create | current | This controls whether the IPX Watchdog Spoofing is enabled or disabled.When enabled, this routing service will spoof IPX Watchdog packets.When disabled, this r… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.2.1.3 | ColumnalaIpxWatchdogSpoofRowStatus | read-create | current | The row status variable, used in accordance to installation and removal conventions for conceptual rows. The RowStatus of a currenty active row in the alaIpxWa… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.3 | TablealaIpxSerialFilterTable | not-accessible | current | The IPX Serialization Filtering Table contains information about all of the current IPX WAN serialization filtering entry statuses. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.3.1 | RowalaIpxSerialFilterEntry | not-accessible | current | Each entry corresponds to one WAN routing service. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.3.1.1 | ColumnalaIpxSerialFilterVlanId | not-accessible | current | The VlanId of the WAN routing service that this entry applies to. If VlanId equals 0, the filter is applied globally to all WAN Vlans. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.3.1.2 | ColumnalaIpxSerialFilterMode | read-create | current | This controls whether the IPX Serialization Filtering is enabled or disabled.When enabled, this routing service will filter IPX Serialization packets.When disa… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.3.1.3 | ColumnalaIpxSerialFilterRowStatus | read-create | current | The row status variable, used in accordance to installation and removal conventions for conceptual rows. The RowStatus of a currenty active row in the alaIpxSe… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.4 | TablealaSpxKeepaliveSpoofTable | not-accessible | current | The SPX Keepalive Spoofing Table contains information about all of the current IPX WAN SPX spoofing filtering entry statuses. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.4.1 | RowalaSpxKeepaliveSpoofEntry | not-accessible | current | Each entry corresponds to one WAN routing service. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.4.1.1 | ColumnalaSpxKeepaliveSpoofVlanId | not-accessible | current | The VlanId of the WAN routing service that this entry applies to. If VlanId equals 0, the filter is applied globally to all WAN Vlans. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.4.1.2 | ColumnalaSpxKeepaliveSpoofMode | read-create | current | This controls whether the SPX Keepalive Spoofing is enabled or disabled.When enabled, this routing service will spoof SPX Keepalive packets.When disabled, this… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.4.1.3 | ColumnalaSpxKeepaliveSpoofRowStatus | read-create | current | The row status variable, used in accordance to installation and removal conventions for conceptual rows. The RowStatus of a currenty active row in the alaIpxKe… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.5 | TablealaIpxType20Table | not-accessible | current | The IPX Type 20 Table contains information about all of the current Type 20 filtering entry statuses. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.5.1 | RowalaIpxType20Entry | not-accessible | current | Each entry corresponds to one Virtual LAN. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.5.1.1 | ColumnalaIpxType20VlanId | not-accessible | current | The VLAN Id of the routing interface that this entry applies to. If VlanId equals 0, the filter is applied globally. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.5.1.2 | ColumnalaIpxType20Mode | read-create | current | This controls whether IPX Type 20 packet are enabled or disabled.When enabled, this routing interface will forward Type 20 packets.When disabled, the packets w… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.2.5.1.3 | ColumnalaIpxType20RowStatus | read-create | current | The row status variable, used in accordance to installation and removal conventions for conceptual rows. The RowStatus of a currenty active row in the alaIpxTy… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.3 | IdentityalaIpxTimerGroup | current | IPX timer information. | |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.3.1 | TablealaIpxTimerTable | not-accessible | current | The IPX Timer Table contains information about all of the current Timer adjustments entry statuses. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.3.1.1 | RowalaIpxTimerEntry | not-accessible | current | Each entry corresponds to one Virtual LAN. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.3.1.1.1 | ColumnalaIpxTimerVlanId | not-accessible | current | The VLAN Id of the routing interface that this entry applies to. If VlanId equals 0, the filter is applied globally. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.3.1.1.2 | ColumnalaIpxTimerSap | read-create | current | This controls whether IPX SAP packet timer duration. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.3.1.1.3 | ColumnalaIpxTimerRip | read-create | current | This controls whether IPX RIP packet timer duration. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.1.3.1.1.4 | ColumnalaIpxTimerRowStatus | read-create | current | The row status variable, used in accordance to installation and removal conventions for conceptual rows. The RowStatus of a currenty active row in the alaIpxTi… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.2 | NodealcatelIND1IPXMIBConformance | |||
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.2.1 | NodealcatelIND1IPXMIBCompliances | |||
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.2.1.1 | CompliancealcatelIND1IPXMIBCompliance | current | The compliance statement for IPX Subsystem and ALCATEL-IND1-IPX-MIB. | |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.2.2 | NodealcatelIND1IPXMIBGroups | |||
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.2.2.1 | GroupalcatelIND1IPXMIBStaticRouteGroup | current | A collection of objects from Static Route Table. | |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.2.2.2 | GroupalcatelIND1IPXMIBDefRouteGroup | current | A collection of objects from Default Route Table. | |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.2.2.3 | GroupalcatelIND1IPXMIBExtMsgGroup | current | A collection of objects from Extended Message Table. | |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.2.2.4 | GroupalcatelIND1IPXMIBFlushGroup | current | A collection of objects to flush the RIP and SAP tables. | |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.2.2.5 | GroupalcatelIND1IPXMIBRipSapFilterGroup | current | A collection of objects from the RIP and SAP Filter tables. | |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.2.2.6 | GroupalcatelIND1IPXMIBWatchdogSpoofGroup | current | A collection of objects from the Watchdog spoof tables. | |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.2.2.7 | GroupalcatelIND1IPXMIBSerialFilterGroup | current | A collection of objects from the Serialization Filter tables. | |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.2.2.8 | GroupalcatelIND1IPXMIBKeepaliveSpoofGroup | current | A collection of objects from the Keepalive Spoof tables. | |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.2.2.9 | GroupalcatelIND1IPXMIBType20Group | current | A collection of objects from the Type 20 packet tables. | |
| 1.3.6.1.4.1.6486.800.1.2.1.10.8.1.2.2.10 | GroupalcatelIND1IPXMIBTimerGroup | current | A collection of objects from the RIP and SAP Timer tables. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| HostAddress | OCTET STRING(SIZE(6)) alaIpxRoutingGroup OBJECT-IDENTITY STATUS current DESCRIPTION "IPX routing information." ::= {alcatelIND1IPXMIBObjects 1} alaIpxFilterGroup OBJECT-IDENTITY STATUS current DESCRIPTION "IPX filtering information." ::= {alcatelIND1IPXMIBObjects 2} alaIpxTimerGroup OBJECT-IDENTITY STATUS current DESCRIPTION "IPX timer information." ::= {alcatelIND1IPXMIBObjects 3} | current | IPX host MAC address. It is a group of the 6 octets from the MAC address. |
| NetNumber | OCTET STRING(SIZE(4)) | current | IPX network number. It is a 32-bit value divided into 4 octets. |