ALCATEL-IND1-LAG-MIB
146 objects
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): The Link Aggregation module for managing ALCATEL FALCON product This MIB is an image of the 802.3ad standard. The aim of this proprietary MIB is to allow the creation of aggregate objects with their size. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
Imported Objects
| ALCATEL-IND1-BASE | lnkaggTraps softentIND1LnkAgg |
| IEEE8023-LAG-MIB | ChurnState LacpKey LacpState |
| IF-MIB | InterfaceIndex |
| Q-BRIDGE-MIB | PortList |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DisplayString MacAddress RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6486.800.1.2.1.13.1 | IdentityalcatelIND1LAGMIB | This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): The Link Aggregation mo… | ||
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1 | NodealcatelIND1LAGMIBObjects | |||
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1 | NodealclnkaggAgg | |||
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.1 | TablealclnkaggAggTable | not-accessible | current | A table that contains information about every Aggregator that is associated with this System. To create specify alclnkaggAggIndex,alclnkaggAggSize and alclnkag… |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.1.1 | RowalclnkaggAggEntry | not-accessible | current | A list of the Aggregator parameters. This is indexed by the ifIndex of the Aggregator. |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.1.1.1 | ColumnalclnkaggAggIndex | not-accessible | current | The unique identifier allocated to this Aggregator by the local System. This attribute identifies an Aggregator instance among the subordinate managed objects … |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.1.1.2 | ColumnalclnkaggAggMACAddress | read-only | current | A 6-octet read-only value carrying the individual MAC address assigned to the Aggregator. |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.1.1.3 | ColumnalclnkaggAggActorSystemPriority | read-create | current | A 2-octet read-create value indicating the priority value associated with the Actor's System ID. |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.1.1.4 | ColumnalclnkaggAggActorSystemID | read-create | current | A 6-octet read-create MAC address value used as a unique identifier for the System that contains this Aggregator. NOTE-From the perspective of the Link Aggrega… |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.1.1.5 | ColumnalclnkaggAggPartnerAdminKey | read-create | current | The current Administrative value of the Key accepted for the Aggregator's current protocol Partner. Optional this is a 16-bit read-create value. If the aggrega… |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.1.1.6 | ColumnalclnkaggAggActorAdminKey | read-create | current | The current administrative value of the Key for the Aggregator. The administrative Key value may differ from the operational Key value for the reasons discusse… |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.1.1.7 | ColumnalclnkaggAggActorOperKey | read-only | current | The current operational value of the Key for the Aggregator. The administrative Key value may differ from the operational Key value for the reasons discussed i… |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.1.1.8 | ColumnalclnkaggAggPartnerSystemID | read-create | current | A 6-octet read-create MAC address value consisting of the unique identifier for the current protocol Partner of this Aggregator. A value of zero indicates that… |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.1.1.9 | ColumnalclnkaggAggPartnerSystemPriority | read-create | current | A 2-octet read-create value that indicates the priority value associated with the Partner's System ID. If the aggregation is manually configured, this System P… |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.1.1.10 | ColumnalclnkaggAggPartnerOperKey | read-create | current | The current operational value of the Key for the Aggregator's current protocol Partner. This is a 16-bit read-create value. If the aggregation is manually conf… |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.1.1.11 | ColumnalclnkaggAggSize | read-create | current | Maximum number of links that could be attached to this aggregator, This nominator is mandatory and is a required field in order to create a row in this table |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.1.1.12 | ColumnalclnkaggAggNumber | read-only | current | Aggreagtor number reference the aggregate dedicated from the ifindex at the creation |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.1.1.13 | ColumnalclnkaggAggDescr | read-only | current | Description is a human readable string which describes of the type of aggregator object OMNICHANNEL / LACP etc � |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.1.1.14 | ColumnalclnkaggAggName | read-create | current | Name of the aggregator is human readable string manually given by the operator |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.1.1.15 | ColumnalclnkaggAggLacpType | read-create | current | Aggreagtor set with LACP protocol or not (case of Omnichannel) mandatory at the creation of the aggregator, cannot be modified later |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.1.1.16 | ColumnalclnkaggAggAdminState | read-create | current | status assigned by the admnistrator. The activation of the aggregator is managed by this nominator |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.1.1.17 | ColumnalclnkaggAggOperState | read-only | current | Operational status of the aggregator with proprietary values operational state from iftable corresponds to UP state |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.1.1.18 | ColumnalclnkaggAggNbrSelectedPorts | read-only | current | The number of ports selected at the momemt . |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.1.1.19 | ColumnalclnkaggAggNbrAttachedPorts | read-only | current | The number of ports attached at the momemt . |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.1.1.20 | ColumnalclnkaggAggPrimaryPortIndex | read-only | current | the ifindex of the primary port in the aggregator used to send BPDUs and flooding frames Zeo indicates no primary port is available . |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.1.1.21 | ColumnalclnkaggAggPrimaryPortPosition | read-only | current | the port index number in the aggregator used to send BPDUs and flooding frames . |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.1.1.22 | ColumnalclnkaggAggRowStatus | read-create | current | This object is the RowStatus (locking flag) for creating or deleting aggregator objects. alclnkaggAggSize, alclnkaggAggLacpType and must be supplied in the req… |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.1.1.23 | ColumnalclnkaggAggPreemptState | read-create | current | This sets the pre-emption state for an aggregate. The default value is disable. |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.1.1.24 | ColumnalclnkaggAggPreemptValue | read-create | current | This sets the pre-empt timer value in seconds for an aggregate. The default value is 30 seconds. |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.1.1.25 | ColumnalclnkaggAggMinimumSize | read-create | current | Minimum number of ports that should be attached to LAG to make LAG operationally UP. |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.1.1.26 | ColumnalclnkaggAggMcLagType | read-create | current | Aggregator set with MultiChassis mode or not mandatory at the creation of the aggregator, cannot be modified later |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.1.1.27 | ColumnalclnkaggAggWTRTimer | read-create | current | This sets the LACP WTR timer value in minutes for an aggregate. The default value is 0 minute. The Default means the WTR is Disabled. When an LACP link comes u… |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.2 | TablealclnkaggAggPortListTable | not-accessible | current | A table that contains a list of all the ports associated with each Aggregator. |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.2.1 | RowalclnkaggAggPortListEntry | not-accessible | current | A list of the ports associated with a given Aggregator. This is indexed by the ifIndex of the Aggregator. |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.2.1.1 | ColumnalclnkaggAggPortListPorts | read-only | current | The complete set of ports currently associated with this Aggregator. Each bit set in this list represents an Actor Port member of this Link Aggregation. |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.3 | ScalaralclnkaggAggEniActivate | read-create | obsolete | This variable activates or deactivates link aggregation for ENI |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.4 | TablealclnkaggSlotTable | not-accessible | current | Each row in this table represents the link aggregation status for the associated slot. |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.4.1 | RowalclnkaggSlotEntry | not-accessible | current | Configuration parameters for link aggregation. |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.4.1.1 | ColumnalclnkaggSlotNum | not-accessible | current | The slot number. |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.4.1.2 | ColumnalclnkaggSlotStatus | read-create | current | Link aggregation enable/disable |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.4.1.3 | ColumnalclnkaggMultipleAggPerSlot | read-create | current | Enable/disable multiple Link aggregation per slot |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.5 | TablealclnkaggAggIdIfIndexTable | not-accessible | current | Each row in this table represents the link aggregation aggregate id's corresponding ifIndex. |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.5.1 | RowalclnkaggAggIdIfIndexEntry | not-accessible | current | Parameters for link aggregation aggregate id relationship to ifIndex. |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.5.1.1 | ColumnalclnkaggIfIndex | not-accessible | current | IfIndex for the given Aggregate ID |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.1.5.1.2 | ColumnalclnkaggAggId | read-only | current | The aggregate id number. |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2 | NodealclnkaggAggPort | |||
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1 | TablealclnkaggAggPortTable | not-accessible | current | A table that contains Link Aggregation Control configuration information about every Aggregation Port associated with this device. A row appears in this table … |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1 | RowalclnkaggAggPortEntry | not-accessible | current | A list of Link Aggregation Control configuration parameters for each Aggregation Port on this device. |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.1 | ColumnalclnkaggAggPortIndex | not-accessible | current | The ifIndex of the port |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.2 | ColumnalclnkaggAggPortActorSystemPriority | read-create | current | A 2-octet read-create value used to define the priority value associated with the Actor's System ID. |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.3 | ColumnalclnkaggAggPortActorSystemID | read-create | current | A 6-octet read-create MAC address value that defines the value of the System ID for the System that contains this Aggregation Port. |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.4 | ColumnalclnkaggAggPortActorAdminKey | read-create | current | The current administrative value of the Key for the Aggregation Port. This is a 16-bit read-create value. The meaning of particular Key values is of local sign… |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.5 | ColumnalclnkaggAggPortActorOperKey | read-only | current | The current operational value of the Key for the Aggregation Port. This is a 16-bit read-only value. The meaning of particular Key values is of local significa… |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.6 | ColumnalclnkaggAggPortPartnerAdminSystemPriority | read-create | current | A 2-octet read-create value used to define the administrative value of priority associated with the Partner's System ID. The assigned value is used, along with… |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.7 | ColumnalclnkaggAggPortPartnerOperSystemPriority | read-only | current | A 2-octet read-only value indicating the operational value of priority associated with the Partner's System ID. The value of this attribute may contain the man… |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.8 | ColumnalclnkaggAggPortPartnerAdminSystemID | read-create | current | A 6-octet read-create MACAddress value representing the administrative value of the Aggregation Port's protocol Partner's System ID. The assigned value is used… |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.9 | ColumnalclnkaggAggPortPartnerOperSystemID | read-only | current | A 6-octet read-only MACAddress value representing the current value of the Aggregation Port's protocol Partner's System ID. A value of zero indicates that ther… |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.10 | ColumnalclnkaggAggPortPartnerAdminKey | read-create | current | The current administrative value of the Key for the protocol Partner. This is a 16-bit read-create value. The assigned value is used, along with the value of a… |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.11 | ColumnalclnkaggAggPortPartnerOperKey | read-only | current | The current operational value of the Key for the protocol Partner. The value of this attribute may contain the manually configured value carried in aAggPortPar… |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.12 | ColumnalclnkaggAggPortSelectedAggID | read-only | current | The identifier value of the Aggregator that this Aggregation Port has currently selected. Zero indicates that the Aggregation Port has not selected an Aggregat… |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.13 | ColumnalclnkaggAggPortAttachedAggID | read-only | current | The identifier value of the Aggregator that this Aggregation Port is currently attached to. Zero indicates that the Aggregation Port is not currently attached … |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.14 | ColumnalclnkaggAggPortActorPort | read-only | current | The port number locally assigned to the Aggregation Port. The port number is communicated in LACPDUs as the Actor_Port. This value is read-only. |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.15 | ColumnalclnkaggAggPortActorPortPriority | read-create | current | The priority value assigned to this Aggregation Port. This 16-bit value is read-create. |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.16 | ColumnalclnkaggAggPortPartnerAdminPort | read-create | current | The current administrative value of the port number for the protocol Partner. This is a 16-bit read-create value. The assigned value is used, along with the va… |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.17 | ColumnalclnkaggAggPortPartnerOperPort | read-only | current | The operational port number assigned to this Aggregation Port by the Aggregation Port's protocol Partner. The value of this attribute may contain the manually … |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.18 | ColumnalclnkaggAggPortPartnerAdminPortPriority | read-create | current | The current administrative value of the port priority for the protocol Partner. This is a 16-bit read-create value. The assigned value is used, along with the … |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.19 | ColumnalclnkaggAggPortPartnerOperPortPriority | read-only | current | The priority value assigned to this Aggregation Port by the Partner. The value of this attribute may contain the manually configured value carried in aAggPortP… |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.20 | ColumnalclnkaggAggPortActorAdminState | read-create | current | A string of 8 bits, corresponding to the administrative values of Actor_State () as transmitted by the Actor in LACPDUs. The first bit corresponds to bit 0 of … |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.21 | ColumnalclnkaggAggPortActorOperState | read-only | current | A string of 8 bits, corresponding to the current operational values of Actor_State as transmitted by the Actor in LACPDUs. The bit allocations are as defined i… |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.22 | ColumnalclnkaggAggPortPartnerAdminState | read-create | current | A string of 8 bits, corresponding to the current administrative value of Actor_State for the protocol Partner. The bit allocations are as defined in . This att… |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.23 | ColumnalclnkaggAggPortPartnerOperState | read-only | current | A string of 8 bits, corresponding to the current values of Actor_State in the most recently received LACPDU transmitted by the protocol Partner. The bit alloca… |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.24 | ColumnalclnkaggAggPortSelectedAggNumber | read-create | current | Aggreagtor number to attach a port at its creation mandatory and only used for the Omnichhannel not allowed for LACP (-1) value displayed when it is not signif… |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.25 | ColumnalclnkaggAggPortGlobalPortNumber | read-only | current | Physical reference of the port |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.26 | ColumnalclnkaggAggPortAdminState | read-only | current | status assigned by the admnistrator. port activation done by iftable this nominator is equivalent to ifAdminStatus in ifTable |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.27 | ColumnalclnkaggAggPortOperState | read-only | current | Operational status of the port regarding the traffic |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.28 | ColumnalclnkaggAggPortState | read-only | current | aggregation status of the port |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.29 | ColumnalclnkaggAggPortLinkState | read-only | current | Operational status of the link |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.30 | ColumnalclnkaggAggPortPrimary | read-only | current | port primary or not |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.31 | ColumnalclnkaggAggPortLacpType | read-create | current | Port set with LACP protocol or not (case of Omnichannel) mandatory at the creation of the port |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.32 | ColumnalclnkaggAggPortRowStatus | read-create | current | This object is the RowStatus (locking flag) for creating or deleting aggregatable port objects. alclnkaggAggPortActorAdminKey and alclnkaggAggPortSlotSlice mus… |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.33 | ColumnalclnkaggAggPortStandbyState | read-create | current | This sets the standby state for a port. The default value is disable. |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.1.1.34 | ColumnalclnkaggAggPortMcLagType | read-only | current | Port set with McLag mode or not |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.2 | TablealclnkaggAggPortStatsTable | not-accessible | current | A table that contains Link Aggregation information about every port that is associated with this device. A row appears in this table for each physical port. |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.2.1 | RowalclnkaggAggPortStatsEntry | not-accessible | current | A list of Link Aggregation Control Protocol statistics for each port on this device. |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.2.1.1 | ColumnalclnkaggAggPortStatsLACPDUsRx | read-only | current | The number of valid LACPDUs received on this Aggregation Port. This value is read-only. |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.2.1.2 | ColumnalclnkaggAggPortStatsMarkerPDUsRx | read-only | current | The number of valid Marker PDUs received on this Aggregation Port. This value is read-only. |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.2.1.3 | ColumnalclnkaggAggPortStatsMarkerResponsePDUsRx | read-only | current | The number of valid Marker Response PDUs received on this Aggregation Port. This value is read-only. |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.2.1.4 | ColumnalclnkaggAggPortStatsUnknownRx | read-only | current | The number of frames received that either: - carry the Slow Protocols Ethernet Type value (), but contain an unknown PDU, or: - are addressed to the Slow Proto… |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.2.1.5 | ColumnalclnkaggAggPortStatsIllegalRx | read-only | current | The number of frames received that carry the Slow Protocols Ethernet Type value (), but contain a badly formed PDU or an illegal value of Protocol Subtype (). … |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.2.1.6 | ColumnalclnkaggAggPortStatsLACPDUsTx | read-only | current | The number of LACPDUs transmitted on this Aggregation Port. This value is read-only. |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.2.1.7 | ColumnalclnkaggAggPortStatsMarkerPDUsTx | read-only | current | The number of Marker PDUs transmitted on this Aggregation Port. This value is read-only. |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.2.1.8 | ColumnalclnkaggAggPortStatsMarkerResponsePDUsTx | read-only | current | The number of Marker Response PDUs transmitted on this Aggregation Port. This value is read-only. |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.3 | TablealclnkaggAggPortDebugTable | not-accessible | current | A table that contains Link Aggregation debug information about every port that is associated with this device. A row appears in this table for each physical po… |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.3.1 | RowalclnkaggAggPortDebugEntry | not-accessible | current | A list of the debug parameters for a port. |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.3.1.1 | ColumnalclnkaggAggPortDebugRxState | read-only | current | This attribute holds the value 'current' if the Receive state machine for the Aggregation Port is in the CURRENT state, 'expired' if the Receive state machine.… |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.3.1.2 | ColumnalclnkaggAggPortDebugLastRxTime | read-only | current | The value of aTimeSinceSystemReset (F.2.1) when the last LACPDU was received by this Aggregation Port. This value is read-only. |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.3.1.3 | ColumnalclnkaggAggPortDebugMuxState | read-only | current | This attribute holds the value `detached' if the Mux state machine (43.4.14) for the Aggregation Port is in the DETACHED state, `waiting' if the Mux state mach… |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.3.1.4 | ColumnalclnkaggAggPortDebugMuxReason | read-only | current | A human-readable text string indicating the reason for the most recent change of Mux machine state. This value is read-only. |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.3.1.5 | ColumnalclnkaggAggPortDebugActorChurnState | read-only | current | The state of the Actor Churn Detection machine () for the Aggregation Port. A value of 'noChurn' indicates that the state machine is in either the NO_ACTOR_CHU… |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.3.1.6 | ColumnalclnkaggAggPortDebugPartnerChurnState | read-only | current | The state of the Partner Churn Detection machine () for the Aggregation Port. A value of 'noChurn' indicates that the state machine is in either the NO_PARTNER… |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.3.1.7 | ColumnalclnkaggAggPortDebugActorChurnCount | read-only | current | Count of the number of times the Actor Churn state machine has entered the ACTOR_CHURN state. This value is read-only. |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.3.1.8 | ColumnalclnkaggAggPortDebugPartnerChurnCount | read-only | current | Count of the number of times the Partner Churn state machine has entered the PARTNER_CHURN state. This value is read-only. |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.3.1.9 | ColumnalclnkaggAggPortDebugActorSyncTransitionCount | read-only | current | Count of the number of times the Actor's Mux state machine () has entered the IN_SYNC state. This value is read-only. |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.3.1.10 | ColumnalclnkaggAggPortDebugPartnerSyncTransitionCount | read-only | current | Count of the number of times the Partner's Mux state machine () has entered the IN_SYNC state. This value is read-only. |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.3.1.11 | ColumnalclnkaggAggPortDebugActorChangeCount | read-only | current | Count of the number of times the Actor's perception of the LAG ID for this Aggregation Port has changed. This value is read-only. |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.2.3.1.12 | ColumnalclnkaggAggPortDebugPartnerChangeCount | read-only | current | Count of the number of times the Partner's perception of the LAG ID (see ) for this Aggregation Port has changed. This value is read-only. |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.3 | ScalaralclnkaggTablesLastChanged | read-only | current | This object indicates the time of the most recent change to the alclnkaggAggTable, alclnkaggAggPortListTable, or alclnkaggAggPortTable. |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.4 | NodelnkaggNotificationVars | |||
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.4.1 | ScalartraplnkaggAggId | accessible-for-notify | current | Index Value of Link Aggregation group . |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.4.2 | ScalartraplnkaggPortIfIndex | accessible-for-notify | current | Port of Link Aggregate group . |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.4.3 | ScalartraplnkaggLagDownReason | accessible-for-notify | current | Reasons for LAG Down adminDown: If user has made LAG admin down allPortsDown: If all the ports in the LAGs are down or none of the port present in LAG, This is… |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.5 | NodealclnkaggAggConfig | |||
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.5.1 | ScalaralclnkAggLocalRangeOperMin | read-only | current | Minimum value of aggregate currently used for local aggregates. Used only when multi-chassis aggregation enabled and chassis id is known. Valid linkagg range i… |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.5.2 | ScalaralclnkAggLocalRangeOperMax | read-only | current | Maximum value of aggregate currently used for local aggregates. Used only when multi-chassis aggregation enabled and chassis id is known. Valid linkagg range i… |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.5.3 | ScalaralclnkAggLocalRangeConfiguredMin | read-write | current | Minimum value of aggregate configured to be used for local aggregates. Used only when multi-chassis aggregation enabled and chassis id is known. Valid linkagg … |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.5.4 | ScalaralclnkAggLocalRangeConfiguredMax | read-write | current | Maximum value of aggregate configured to be used for local aggregates. Used only when multi-chassis aggregation enabled and chassis id is known. Valid linkagg … |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.5.5 | ScalaralclnkAggPeerRangeOperMin | read-only | current | Minimum value of aggregate currently used for peer aggregates. Used only when multi-chassis aggregation enabled and chassis id is known. Valid linkagg range is… |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.5.6 | ScalaralclnkAggPeerRangeOperMax | read-only | current | Maximum value of aggregate currently used for peer aggregates. Used only when multi-chassis aggregation enabled and chassis id is known. Valid linkagg range is… |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.5.7 | ScalaralclnkAggPeerRangeConfiguredMin | read-write | current | Minimum value of aggregate configured to be used for peer aggregates. Used only when multi-chassis aggregation enabled and chassis id is known. Valid linkagg r… |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.5.8 | ScalaralclnkAggPeerRangeConfiguredMax | read-write | current | Maximum value of aggregate configured to be used for peer aggregates. Used only when multi-chassis aggregation enabled and chassis id is known. Valid linkagg r… |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.5.9 | ScalaralclnkAggMcLagRangeOperMin | read-only | current | Minimum value of aggregate currently used for Multi Chassis aggregates. Used only when multi-chassis aggregation enabled and chassis id is known. Valid linkagg… |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.5.10 | ScalaralclnkAggMcLagRangeOperMax | read-only | current | Maximum value of aggregate currently used for Multi Chassis aggregates. Used only when multi-chassis aggregation enabled and chassis id is known. Valid linkagg… |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.5.11 | ScalaralclnkAggMcLagRangeConfiguredMin | read-write | current | Minimum value of aggregate configured to be used for Multi Chassis aggregates. Used only when multi-chassis aggregation enabled and chassis id is known. Valid … |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.1.5.12 | ScalaralclnkAggMcLagRangeConfiguredMax | read-write | current | Maximum value of aggregate configured to be used for Multi Chassis aggregates. Used only when multi-chassis aggregation enabled and chassis id is known. Valid … |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.2 | IdentityalcatelIND1LAGMIBConformance | current | Branch For Link Aggregation Subsystem Conformance Information. | |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.2.1 | IdentityalcatelIND1LAGMIBGroups | current | Branch For Link Aggregation Subsystem Units Of Conformance. | |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.2.1.1 | GroupalclnkaggAggGroup | current | A collection of objects providing information about an aggregation. | |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.2.1.2 | GroupalclnkaggAggPortListGroup | current | A collection of objects providing information about every port in an aggregation. | |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.2.1.3 | GroupalclnkaggAggPortGroup | current | A collection of objects providing information about every port in an aggregation. | |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.2.1.4 | GroupalclnkaggAggPortStatsGroup | current | A collection of objects providing information about every port in an aggregation. | |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.2.1.5 | GroupalclnkaggAggPortDebugGroup | current | A collection of objects providing debug information about. every aggregated port. | |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.2.1.6 | GroupalclnkaggTablesLastChangedGroup | current | A collection of objects providing information about the time of changes to the configuration of aggregations and their ports. | |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.2.1.7 | GrouplnkaggNotificationVarsGroup | current | Collection of objects which appear only in notifications. | |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.2.1.8 | GrouplnkaggTrapsGroup | current | Collection of Traps for Link Aggregation . | |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.2.1.9 | GroupalclnkaggSlotGroup | current | Configuration parameters for link aggregation. | |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.2.1.10 | GroupalclnkaggAggConfigGroup | current | A collection of objects providing information about ranges allowed aggregate number values. | |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.2.2 | IdentityalcatelIND1LAGMIBCompliances | current | Branch For Link Aggregation Subsystem Compliance Statements. | |
| 1.3.6.1.4.1.6486.800.1.2.1.13.1.2.2.1 | CompliancealclnkaggAggCompliance | current | The compliance statement for device support of Link Aggregation. | |
| 1.3.6.1.4.1.6486.800.1.3.2.14.0.1 | NotificationlnkaggAggUp | current | The Link Aggregation is active . This trap is sent when any one port of the link aggregation goes to attached state. | |
| 1.3.6.1.4.1.6486.800.1.3.2.14.0.2 | NotificationlnkaggAggDown | current | The Link Aggregation is not active . This trap is sent when all ports of the link aggregation goes out of attached state. | |
| 1.3.6.1.4.1.6486.800.1.3.2.14.0.3 | NotificationlnkaggPortJoin | current | The Link Aggregation port joins the aggregate . This trap is sent when given port of the link aggregation goes to attached state. | |
| 1.3.6.1.4.1.6486.800.1.3.2.14.0.4 | NotificationlnkaggPortLeave | current | The Link Aggregation port leaves the aggregate . This trap is sent when given port of the link aggregation goes out of attached state. | |
| 1.3.6.1.4.1.6486.800.1.3.2.14.0.5 | NotificationlnkaggPortRemove | current | The Link Aggregation port removed from the aggregate . This trap is sent when given port of the link aggregation removed due to invalid configuration . | |
| 1.3.6.1.4.1.6486.800.1.3.2.14.0.6 | NotificationlnkaggPortReserve | current | The Link Aggregation port is reserved for this aggregate . This trap is sent when given port of the link aggregation goes to reserved state. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| LacpType | INTEGER { lacpOff(0), lacpOn(1) } | current | The object supports or not (Omnichannel) the LACP protocol . |
| McLagType | INTEGER { mcLagOff(0), mcLagOn(1) } | current | The object supports or not the Multi Chassis Link aggregation . |