ALCATEL-IND1-LBD-MIB
45 objects
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line LBD for detection loopback. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2002 Alcatel Internetworking, Incorporated ALL RIGHTS RESERVED WORLDWIDE
Imported Objects
| ALCATEL-IND1-BASE | alaLbdTraps softentIND1Lbd |
| IF-MIB | InterfaceIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE Unsigned32 |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6486.800.1.2.1.56.1 | IdentityalcatelIND1LBDMIB | This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey P… | ||
| 1.3.6.1.4.1.6486.800.1.2.1.56.1.1 | IdentityalcatelIND1LBDMIBObjects | current | Branch For Loopback-Detection Subsystem Managed Objects. | |
| 1.3.6.1.4.1.6486.800.1.2.1.56.1.1.1 | ScalaralaLbdGlobalConfigStatus | read-write | current | This object is used to enable or disable LBD on the switch. The value enable (1) indicates that LBD should be enabled on the switch. The value disable (2) is u… |
| 1.3.6.1.4.1.6486.800.1.2.1.56.1.1.2 | ScalaralaLbdGlobalConfigTransmissionTimer | read-write | current | This object is used to set the transmission timer for LBD feature globally. It is allowed to modify the timer at any instance but the new timer value will be e… |
| 1.3.6.1.4.1.6486.800.1.2.1.56.1.1.3 | ScalaralaLbdGlobalClearPortStat | read-write | current | Defines the global clear statistics control for port for LBD. default(0) - default value for this object, reset(1) - indicates that LBD should clear all statis… |
| 1.3.6.1.4.1.6486.800.1.2.1.56.1.1.4 | ScalaralaLbdGlobalConfigAutorecoveryTimer | read-write | current | This object is used to make up all the disabled ports which was caused due to loop-back detection. |
| 1.3.6.1.4.1.6486.800.1.2.1.56.1.1.5 | NodealaLbdPortConfig | |||
| 1.3.6.1.4.1.6486.800.1.2.1.56.1.1.5.1 | TablealaLbdPortConfigTable | not-accessible | current | A table containing LBD user port configuration information. |
| 1.3.6.1.4.1.6486.800.1.2.1.56.1.1.5.1.1 | RowalaLbdPortConfigEntry | not-accessible | current | A LBD user port configuration entry. |
| 1.3.6.1.4.1.6486.800.1.2.1.56.1.1.5.1.1.1 | ColumnalaLbdPortConfigIfIndex | not-accessible | current | The physical identification number for this port. |
| 1.3.6.1.4.1.6486.800.1.2.1.56.1.1.5.1.1.2 | ColumnalaLbdPortConfigLbdAdminStatus | read-write | current | This object is used to enable or disable loopback-detection per port. The value enable(1) indicates that loopback-detection is enabled on this port. The value … |
| 1.3.6.1.4.1.6486.800.1.2.1.56.1.1.5.1.1.3 | ColumnalaLbdPortConfigLbdOperStatus | read-only | current | This object specifies the current operational state of the corresponding port. |
| 1.3.6.1.4.1.6486.800.1.2.1.56.1.1.6 | NodealaLbdPortStat | |||
| 1.3.6.1.4.1.6486.800.1.2.1.56.1.1.6.1 | TablealaLbdPortStatsTable | not-accessible | current | A table containing Loop Back Detection information. |
| 1.3.6.1.4.1.6486.800.1.2.1.56.1.1.6.1.1 | RowalaLbdPortStatsEntry | not-accessible | current | A LBD Statistics entry on per port. |
| 1.3.6.1.4.1.6486.800.1.2.1.56.1.1.6.1.1.1 | ColumnalaLbdPortStatsIfIndex | not-accessible | current | The ifindex of the port on which LBD is running. |
| 1.3.6.1.4.1.6486.800.1.2.1.56.1.1.6.1.1.2 | ColumnalaLbdPortNumLbdInvalidRcvd | read-only | current | Number of Invalid packets received by a port. |
| 1.3.6.1.4.1.6486.800.1.2.1.56.1.1.6.1.1.3 | ColumnalaLbdPortLbdSent | read-only | current | Number of LBD packets sent by a port. |
| 1.3.6.1.4.1.6486.800.1.2.1.56.1.1.6.1.1.4 | ColumnalaLbdPortStatsClear | read-write | current | When this object is set to reset(1), all statistics parameters corresponding to this port gets cleared (reset). |
| 1.3.6.1.4.1.6486.800.1.2.1.56.1.2 | IdentityalcatelIND1LBDMIBConformance | current | Branch for LBD Module MIB Subsystem Conformance Information. | |
| 1.3.6.1.4.1.6486.800.1.2.1.56.1.2.1 | IdentityalcatelIND1LBDMIBGroups | current | Branch for LBD Module MIB Subsystem Units of Conformance. | |
| 1.3.6.1.4.1.6486.800.1.2.1.56.1.2.1.1 | GroupalaLbdGlobalConfigGroup | current | Collection of objects for management of LBD Global Configuration. | |
| 1.3.6.1.4.1.6486.800.1.2.1.56.1.2.1.2 | GroupalaLbdIntfConfigGroup | current | Collection of objects for management of LBD per port Configuration. | |
| 1.3.6.1.4.1.6486.800.1.2.1.56.1.2.1.3 | GroupalaLbdPortStatusGroup | current | Collection of objects for LBD Statistics information. | |
| 1.3.6.1.4.1.6486.800.1.2.1.56.1.2.1.4 | GroupalaLbdStateTrapToShutdownGroup | current | Collection of objects for LBD State change to shutdown Traps . | |
| 1.3.6.1.4.1.6486.800.1.2.1.56.1.2.1.5 | GroupalaLbdStateTrapForClearViolationAllGroup | current | Collection of objects for LBD State Traps due to issuing clear-violation-all. | |
| 1.3.6.1.4.1.6486.800.1.2.1.56.1.2.1.6 | GroupalaLbdStateTrapForAutoRecoveryGroup | current | Collection of objects for LBD State Traps due to auto-recovery mechanism. | |
| 1.3.6.1.4.1.6486.800.1.2.1.56.1.2.1.7 | GroupalaLbdTrapsGroup | current | ||
| 1.3.6.1.4.1.6486.800.1.2.1.56.1.2.2 | IdentityalcatelIND1LBDMIBCompliances | current | Branch for LBD Module MIB Subsystem Compliance Statements. | |
| 1.3.6.1.4.1.6486.800.1.2.1.56.1.2.2.1 | CompliancealcatelIND1LBDMIBCompliance | current | Compliance statement for LBD. | |
| 1.3.6.1.4.1.6486.800.1.3.2.22.1 | NodealaLbdTrapsDesc | |||
| 1.3.6.1.4.1.6486.800.1.3.2.22.1.0 | NodealaLbdTrapsRoot | |||
| 1.3.6.1.4.1.6486.800.1.3.2.22.1.0.1 | NotificationalaLbdStateChangeToShutdown | current | When the port state becomes shutdown, a notification is sent to the Management Entity with the LBD-state information. | |
| 1.3.6.1.4.1.6486.800.1.3.2.22.1.0.2 | NotificationalaLbdStateChangeForClearViolationAll | current | When the the port state changes from shutdown due to clear-violation-all, a notification is sent to the Management Entity, with the LBD-state information. | |
| 1.3.6.1.4.1.6486.800.1.3.2.22.1.0.3 | NotificationalaLbdStateChangeForAutoRecovery | current | When the port state changes from shutdown due to auto-recovery mechanism, a notification is sent to the Management Entity with the LBD-state information. | |
| 1.3.6.1.4.1.6486.800.1.3.2.22.2 | NodealaLbdTrapsObj | |||
| 1.3.6.1.4.1.6486.800.1.3.2.22.2.1 | ScalaralaLbdPortIfIndex | accessible-for-notify | current | The ifIndex of the port on which LBD trap is raised |
| 1.3.6.1.4.1.6486.800.1.3.2.22.2.2 | ScalaralaLbdPreviousState | accessible-for-notify | current | The previous state of the port on which LBD was running. |
| 1.3.6.1.4.1.6486.800.1.3.2.22.2.3 | ScalaralaLbdCurrentState | accessible-for-notify | current | The current state of the port on which LBD was running. |
| 1.3.6.1.4.1.6486.800.1.3.2.22.2.4 | ScalaralaLbdPreviousStateClearViolationAll | accessible-for-notify | current | The state of the the port where LBD was running before clear-violation-all applied. |
| 1.3.6.1.4.1.6486.800.1.3.2.22.2.5 | ScalaralaLbdCurrentStateClearViolationAll | accessible-for-notify | current | The state of the the port where LBD was running after clear-violation-all applied. |
| 1.3.6.1.4.1.6486.800.1.3.2.22.2.6 | ScalaralaLbdPreviousStateAutoRecovery | accessible-for-notify | current | The state of the the port where LBD was running before auto-recovery. |
| 1.3.6.1.4.1.6486.800.1.3.2.22.2.7 | ScalaralaLbdCurrentStateAutoRecovery | accessible-for-notify | current | The state of the the port where LBD was running after auto-recovery. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AlaLbdCurrentStateCVAorAR | INTEGER { inactive (0), normal (1) } | current | Specifies the state of the port, where LBD was running, after auto-recovery or issuing clear-violation-all. |
| AlaLbdPortConfigLbdOperStatus | INTEGER { inactive (0), normal (1), shutdown (2) } | current | Specifies the current operational state of this port. |