ALCATEL-IND1-OPENFLOW-MIB
70 objects
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): Openflow for OS6900 Product Line. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 2013 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
Imported Objects
| ALCATEL-IND1-BASE | softentIND1OpenflowMIB |
| INET-ADDRESS-MIB | InetAddress InetAddressType |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | RowStatus TimeStamp |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6486.800.1.2.1.70.1 | IdentityalcatelIND1OpenflowMIB | This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): Openflow for OS6900 Pro… | ||
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.0 | NodealcatelIND1OpenflowMIBNotifications | |||
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.1 | IdentityalcatelIND1OpenflowMIBObjects | current | Alcatel-Lucent Openflow Managed Objects. | |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.1.1 | NodealaOpenflowGlobalConfigObjects | |||
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.1.1.1 | ScalaralaOpenflowGlobalBackoffMax | read-write | current | Alcatel-Lucent Openflow maximum back-off time in seconds for controller connection attempts. |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.1.1.2 | ScalaralaOpenflowGlobalIdleProbeTimeout | read-write | current | Alcatel-Lucent Openflow idle probe timeout value in seconds. If set to 0, idle probing is disabled. |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.1.2 | TablealaOpenflowLogicalSwitchTable | not-accessible | current | This table contains one row for each Logical Switch. |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.1.2.1 | RowalaOpenflowLogicalSwitchEntry | not-accessible | current | Information about the Openflow Logical Switches. |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.1.2.1.1 | ColumnalaOpenflowLogicalSwitch | not-accessible | current | Openflow Logical Switch Name. |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.1.2.1.2 | ColumnalaOpenflowLogicalSwitchAdminState | read-create | current | Logical Switch Admin State. Enable or disable the Logical Switch. When disabled, all controllers for the Logical Switch will be operationally disabled and flow… |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.1.2.1.3 | ColumnalaOpenflowLogicalSwitchMode | read-create | current | Openflow Logical Switch Mode. Normal is regular Openflow, API is for ACL-like flow operation. Only one Logical Switch can be in api mode at a time. This object… |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.1.2.1.4 | ColumnalaOpenflowLogicalSwitchVersions | read-create | current | Openflow Logical Switch Bitmap of enabled Openflow versions. At least one version must be enabled. |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.1.2.1.5 | ColumnalaOpenflowLogicalSwitchVlan | read-create | current | Openflow Logical Switch VLAN. The value 0 indicates that no VLAN has been specified, it is not a valid value to write. This object is not valid to write when c… |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.1.2.1.6 | ColumnalaOpenflowLogicalSwitchControllerCount | read-only | current | Count of the configured controllers for the Logical Switch. |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.1.2.1.7 | ColumnalaOpenflowLogicalSwitchInterfaceCount | read-only | current | Count of the configured interfaces (ports and link aggregations) for the Logical Switch. |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.1.2.1.8 | ColumnalaOpenflowLogicalSwitchFlowCount | read-only | current | Count of the flows pushed to the Logical Switch by its controllers. |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.1.2.1.9 | ColumnalaOpenflowLogicalSwitchRowStatus | read-create | current | Deleting a row from this table will also remove associated entries from other tables in this mib that have a logical switch as part of their index. |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.1.3 | TablealaOpenflowControllerTable | not-accessible | current | This table contains one row for each controller on each logical switch. Currently, up to three controllers per logical switch are supported per logical switch. |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.1.3.1 | RowalaOpenflowControllerEntry | not-accessible | current | Information about the Openflow Controllers attached to Logical Switches. |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.1.3.1.1 | ColumnalaOpenflowControllerLogicalSwitch | not-accessible | current | Openflow Logical Switch Name. |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.1.3.1.2 | ColumnalaOpenflowControllerIpType | not-accessible | current | Openflow Controller IP Address Type. The only type currently supported is ipv4(1) |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.1.3.1.3 | ColumnalaOpenflowControllerIp | not-accessible | current | Openflow Controller IP Address. As specified by alaOpenflowControllerIpType, only ipv4 is currently supported |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.1.3.1.4 | ColumnalaOpenflowControllerPort | not-accessible | current | Openflow Controller Port. |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.1.3.1.5 | ColumnalaOpenflowControllerRole | read-only | current | Role of the Controller for the Logical Switch. The role is negotiated by the controllers and the switch is notified of the outcome (1.3.1+). 1.0 controllers wi… |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.1.3.1.6 | ColumnalaOpenflowControllerAdminState | read-create | current | Controller Admin State. Enable or disable connection to the controller. The Logical Switch runs in 'Fail Secure Mode' so all flow aging, etc continues unaffect… |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.1.3.1.7 | ColumnalaOpenflowControllerOperState | read-only | current | State of the Logical Switch connection to the Controller. |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.1.3.1.8 | ColumnalaOpenflowControllerRowStatus | read-create | current | On create, if the specified logical switch does not exist in alaOpenflowLogicalSwitchTable, an entry will be created in that table. Delete does not effect alaO… |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.1.4 | TablealaOpenflowInterfaceTable | not-accessible | current | This table contains one row for each interface (port or link aggregation) assigned to a logical switch. An interface can only belong to one logical switch at a… |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.1.4.1 | RowalaOpenflowInterfaceEntry | not-accessible | current | Information about the interfaces assigned to Openflow Logical Switches. |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.1.4.1.1 | ColumnalaOpenflowInterfaceLogicalSwitch | not-accessible | current | Openflow Logical Switch Name. |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.1.4.1.2 | ColumnalaOpenflowInterface | not-accessible | current | Openflow Interface attached to a Logical Switch. Port values are dot1dBasePort values, Link Aggregations start at 32769. |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.1.4.1.3 | ColumnalaOpenflowInterfaceMode | read-only | current | Openflow Interface Mode. Normal is regular Openflow, API is for ACL like flow operation. |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.1.4.1.4 | ColumnalaOpenflowInterfaceRowStatus | read-create | current | On create, if the specified logical switch does not exist in alaOpenflowLogicalSwitchTable, an entry will be created in that table. Delete does not effect alaO… |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.1.5 | TablealaOpenflowFlowStatsTable | not-accessible | current | This table is used to display the flow table statistics.For a each logical-switch added it is used to display Exact match table and wild card match table flow … |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.1.5.1 | RowalaOpenflowFlowStatsEntry | not-accessible | current | Entry to display logical-switch's exact and wild match table flow count. |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.1.5.1.1 | ColumnalaOpenflowFlowStatsLogicalSwitch | read-only | current | Openflow logical-switch name. |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.1.5.1.2 | ColumnalaOpenflowFlowStatsExactCount | read-only | current | Exact match table flow count for openflow logical-Switch. |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.1.5.1.3 | ColumnalaOpenflowFlowStatsWildCount | read-only | current | Wild card match table flow count for openflow logical-switch. |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.1.6 | TablealaOpenflowFlowEntryStatsTable | not-accessible | current | This table is used to display the flow entry statistics.For a each logical-switch added,it is used to display flow id, Received packets,Transmitted packets and… |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.1.6.1 | RowalaOpenflowFlowEntryStatsEntry | not-accessible | current | Entry to display flow-id,received packets, bytes and duration in seconds output for each logical-switch. |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.1.6.1.1 | ColumnalaOpenflowFlowEntryStatsLogicalSwitch | read-only | current | Openflow logical-switch name. |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.1.6.1.2 | ColumnalaOpenflowFlowEntryStatsFlowId | read-only | current | Flow-id for the openflow logical-switch flow entry statistics. |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.1.6.1.3 | ColumnalaOpenflowFlowEntryStatsRcvdPcks | read-only | current | To display No. of packets received in openlfow logical-switch flow entry statistics. |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.1.6.1.4 | ColumnalaOpenflowFlowEntryStatsRcvdbytes | read-only | current | To display No. of bytes received in openflow logical-switch flow enter statistics. |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.1.6.1.5 | ColumnalaOpenflowFlowEntryStatsDuration | read-only | current | To display duration for openlfow logical-switch flow entry in seconds. |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.1.7 | TablealaOpenflowPortStatsTable | not-accessible | current | This table is used to display openflow logical-switch enabled port information.It has slot/port, transmitted,received packets and duration information. |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.1.7.1 | RowalaOpenflowPortStatsEntry | not-accessible | current | Entry to display information on each openflow enabled slot/port information. |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.1.7.1.1 | ColumnalaOpenflowPortStatsLogicalSwitch | read-only | current | Openflow logical-switch name. |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.1.7.1.2 | ColumnalaOpenflowPortStatsSlotNumber | read-only | current | Openflow enabled Slot Number. |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.1.7.1.3 | ColumnalaOpenflowPortStatsPortNumber | read-only | current | Openflow enabled Port Number. |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.1.7.1.4 | ColumnalaOpenflowPortStatsTransPcks | read-only | current | To display No. of Transmitted Packets. |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.1.7.1.5 | ColumnalaOpenflowPortStatsRcvdPcks | read-only | current | To display No. of Received Packets. |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.1.7.1.6 | ColumnalaOpenflowPortStatsDuration | read-only | current | Duration taken by openflow enabled ports in seconds. |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.1.8 | TablealaOpenflowGroupStatsTable | not-accessible | current | This table is used to diaplay the openflow group statistics. |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.1.8.1 | RowalaOpenflowGroupStatsEntry | not-accessible | current | Entry to display openflow group-id and duration of each logical-switch. |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.1.8.1.1 | ColumnalaOpenflowGroupStatsLogicalSwitch | read-only | current | Openflow logical-switch name. |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.1.8.1.2 | ColumnalaOpenflowGroupStatsId | read-only | current | Group-id for logical-switch. |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.1.8.1.3 | ColumnalaOpenflowGroupStatsDuration | read-only | current | To display Duration for openflow logical-switch in seconds. |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.2 | IdentityalcatelIND1OpenflowMIBConformance | current | Alcatel-Lucent Openflow Conformance Information. | |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.2.1 | IdentityalcatelIND1OpenflowMIBGroups | current | Branch For ALU Openflow MIB Subsystem Units Of Conformance. | |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.2.1.1 | GroupalaOpenflowModuleConfigGroup | current | Openflow Global Configuration Modules Group. | |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.2.1.2 | GroupalaOpenflowModuleLogicalSwitchGroup | current | Openflow Logical Switch Configuration Modules Group. | |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.2.1.3 | GroupalaOpenflowModuleControllerGroup | current | Openflow Controller Configuration Modules Group. | |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.2.1.4 | GroupalaOpenflowModuleInterfaceGroup | current | Openflow Interface Configuration Modules Group. | |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.2.1.5 | GroupalaOpenflowModuleFlowStatsGroup | current | Openflow Flow Table Statistics Dispaly Modules Group. | |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.2.1.6 | GroupalaOpenflowModuleFlowEntryStatsGroup | current | Openflow Flow Entry Statistics Display Modules Group. | |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.2.1.7 | GroupalaOpenflowModulePortStatsGroup | current | Openflow port Statistics Display Modules Group. | |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.2.1.8 | GroupalaOpenflowModuleGroupStatsGroup | current | Openflow Group Statistics Display Modules Group. | |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.2.2 | IdentityalcatelIND1OpenflowMIBCompliances | current | Branch For ALU Openflow MIB Subsystem Compliance Statements. | |
| 1.3.6.1.4.1.6486.800.1.2.1.70.1.2.2.1 | CompliancealaOpenflowMIBCompliance | current | Compliance statement for Openflow. |