ALCATEL-IND1-PORT-MIB
326 objects
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): This group contains the configuration information data for the Ethernet Switching Module. The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
Imported Objects
| ALCATEL-IND1-BASE | cmmEsmDrvTraps softentIND1Port |
| IF-MIB | ifIndex ifInErrors ifOutErrors InterfaceIndex |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter64 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString RowStatus TEXTUAL-CONVENTION TimeStamp |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6486.800.1.2.1.5.1 | IdentityalcatelIND1PortMIB | This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): This group contains the… | ||
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.0 | NodealcatelIND1PortNotifications | |||
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.0.1 | NodeddmNotifications | |||
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.0.1.0.1 | NotificationddmTemperatureThresholdViolated | current | This object notifies management station if an SFP/XFP/SFP+ temperature has crossed any threshold or reverted from previous threshold violation for a port repre… | |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.0.1.0.2 | NotificationddmVoltageThresholdViolated | current | This object notifies management station if an SFP/XFP/SFP+ supply voltage has crossed any threshold or reverted from previous threshold violation for a port re… | |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.0.1.0.3 | NotificationddmCurrentThresholdViolated | current | This object notifies management station if an SFP/XFP/SFP+ Tx bias current has crossed any threshold or reverted from previous threshold violation for a port r… | |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.0.1.0.4 | NotificationddmTxPowerThresholdViolated | current | This object notifies management station if an SFP/XFP/SFP+ Tx output power has crossed any threshold or reverted from previous threshold violation for a port r… | |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.0.1.0.5 | NotificationddmRxPowerThresholdViolated | current | This object notifies management station if an SFP/XFP/SFP+ Rx optical power has crossed any threshold or reverted from previous threshold violation for a port … | |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.0.2 | NodeesmViolationNotifications | |||
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.0.2.0.1 | NotificationesmViolationRecoveryTimeout | current | This object notifies management station if User-Port ports get re-enabled after esm violation recovery time | |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.0.3 | NotificationalaEsmKite2eDBChange | current | When SFP+ daughter module is inserted in place of CX4 stacking module or vice versa, then this notification is sent to Management Entity. Please note that if t… | |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.0.4 | NotificationesmPortViolation | current | This object notifies management station whenever an interface is shut down by a feature due to violation. | |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.0.5 | NotificationalaDBChange | current | When there is a change in the expansion module presence, then this notification is sent to Management Entity. Please note that if the old module and new module… | |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1 | NodealcatelIND1PortMIBObjects | |||
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.1 | NodeesmConfTrap | |||
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.1.1 | ScalaresmDrvTrapDrops | read-only | current | Partitioned port (separated due to errors). |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.1.2 | ScalaralaDyingGaspSlot | accessible-for-notify | current | This object specifies the slot number of the chassis whose NI is going down. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.1.3 | ScalaralaDyingGaspPowerSupplyType | accessible-for-notify | current | This object specifies the type of the power supply. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.1.4 | ScalaralaDyingGaspTime | accessible-for-notify | current | This object specifies the time of power failure. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.1.5 | ScalaresmPortViolationValue | accessible-for-notify | current | This object contains the mapping of esmPortViolation bitmap to an integeral value. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.1.6 | ScalaresmStormViolationThresholdNotificationType | accessible-for-notify | current | This type defines the trap genrated by storm control feature for high or low threshold. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.1.7 | ScalaresmStormViolationThresholdTrafficType | accessible-for-notify | current | This type defines the traffic for which the trap genrated by storm control feature for high or low threshold. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2 | NodephysicalPort | |||
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1 | TableesmConfTable | not-accessible | current | A list of ESM Physical Port instances. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1 | RowesmConfEntry | not-accessible | current | A ESM Physical Port entry. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.1 | ColumnesmPortSlot | read-only | current | The physical Slot number for this Ethernet Port. Slot number has been added to be used by the private Trap. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.2 | ColumnesmPortIF | read-only | current | The on-board interface number for this Ethernet Port. Port Number has been added to be used by the private Trap. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.3 | ColumnesmPortAutoSpeed | read-only | current | The automatically detected port line speed of this ESM port. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.4 | ColumnesmPortAutoDuplexMode | read-only | current | The automatically detected port duplex mode of this ESM port. Note: GigaEthernet supports only Full duplex mode. Default value for 10/100 = Half duplex mode. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.5 | ColumnesmPortCfgSpeed | read-write | current | The configured port line speed of this ESM port. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.6 | ColumnesmPortCfgDuplexMode | read-write | current | The configured port duplex mode of this ESM port. Note: GigaEthernet support only full-duplex. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.7 | ColumnesmPortCfgIFG | read-write | current | Contains the setting of Inter-Frame Gap (IFG), in bytes for receive and transmit. The range is from 9 to 12 bytes. Note: The default value changed according to… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.8 | ColumnesmPortPauseSlotTime | read-write | current | Indicates the number of microseconds the other end-station waits after the reception of a pause frame. Note: Pause Flow control is not available for 10Mbps. Fo… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.9 | ColumnesmPortMaxFloodRate | read-write | current | Broadcast flood threshold type. To set the type, set esmPortMaxFloodRateLimit also. The default value for flood rate is: 1. 4 mbps if the port speed is 10 mbps… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.10 | ColumnesmPortFloodMcastEnable | read-write | current | Enable/disable the maximum flood rate for multicast. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.11 | ColumnesmPortCfgMaxFrameSize | read-write | current | Configure the value of the maximum frame size allow. For 10/100: It is a range between 1518(untagged) and 1553 bytes. For GigaEthernet: It is a range between 1… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.12 | ColumnesmPortCfgLongEnable | read-write | current | Allow the user to change the maximun Frame size. Note: It is not configurable for 10/100 Ethernet port. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.13 | ColumnesmPortCfgRuntEnable | read-write | current | Allow the user to change the minimum Frame size. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.14 | ColumnesmPortCfgRuntSize | read-write | current | Configure the value of the minimum frame size allow per ports. The range is 0 to 64. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.15 | ColumnesmPortCfgAutoNegotiation | read-write | current | Allow the user to enable or disable the port auto negotiation. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.16 | ColumnesmPortCfgCrossover | read-write | current | Allow the user to configure port crossover. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.17 | ColumnesmPortCfgFlow | read-write | current | Use the dot3PauseAdminMode from the standard MIB to configure the flow control. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.18 | ColumnesmPortCfgHybridActiveType | read-only | current | This object is only applicable to hybrid ports . It indicates configured active media type.(the operational media type may be different if esmPortCfgHybridMode… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.19 | ColumnesmPortCfgHybridMode | read-write | current | This object is only applicable to hybrid ports. This allows the user the user to configure the media type with which the port should come up. The user can conf… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.20 | ColumnesmPortOperationalHybridType | read-only | current | This object is only applicable to hybrid ports . It indicates the actual media type that has link up and is or will be passing traffic. If link is not present … |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.21 | ColumnesmPortCfgMMULowWaterMarkCellSetLimit | read-write | current | Per-port-per-CoS Head of Line blocking cell limits. Range is 0 - 16383 Firebolt register Offset: 0x006pp30 - 0x37 Bits: 13:0 CellSetLimit , Default: 0x0100 Thi… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.22 | ColumnesmPortCfgMMUDynamicCellSetLimit | read-write | current | Per-egress port cell-based dynamic (shared buffer pool) memory usage drop and resume thresholds. This sets the limit for which the eight CoS-Qs within a port m… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.23 | ColumnesmPortViolationBitMap | read-only | current | A bit map that identifies the set of Application that have blocked a port as a result of a particular violation |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.24 | ColumnesmPortViolationClearAll | read-write | current | Clear all port vioaltion |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.25 | ColumnesmPortFloodBcastEnable | read-write | current | Enable/disable the maximum flood rate for Broadcast. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.26 | ColumnesmPortFloodUnknownUcastEnable | read-write | current | Enable/disable the maximum flood rate for unknown unicast. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.27 | ColumnesmPortMaxUnknownUcastFloodRate | read-write | current | Unknown-Unicast flood threshold type. To set the type, set esmPortMaxUnknownUcastFloodRateLimit also. The default value for flood rate is: 1. 4 mbps if the por… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.28 | ColumnesmPortMaxMcastFloodRate | read-write | current | Multicast flood threshold type. To set the type, set esmPortMaxFloodRateLimit also. The default value for flood rate is: 1. 4 mbps if the port speed is 10 mbps… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.29 | ColumnesmPortMaxFloodRateLimit | read-write | current | The value of the maximum broadcast flood limit. The actual range of the flood limit depends on the port speed. example: Percentage: 1 - 100 Mbps: 1 - 1000 (1G … |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.30 | ColumnesmPortMaxUnknownUcastFloodRateLimit | read-write | current | The value of the maximum unknown-unicast flood limit The actual range of the flood limit depends on the port speed. example: Percentage: 1 - 100 Mbps: 1 - 1000… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.31 | ColumnesmPortMaxMcastFloodRateLimit | read-write | current | The value of the maximum multicast flood limit The actual range of the flood limit depends on the port speed. example: Percentage: 1 - 100 Mbps: 1 - 1000 (1G s… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.32 | ColumnesmPortCfgSFPType | read-only | current | This object is only applicable to fiber ports. The string indicates the type of SFP/GBIC of active media. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.33 | ColumnesmPortWaitToRestoreTimer | read-write | current | Indicates the number of seconds after which the link up event is notified to other applications. The timer is started whenever a Link Up is detected on a port … |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.34 | ColumnesmPortMinFloodRateLimit | read-write | current | The value of the minimum broadcast flood limit this value should be same type as that of the maximum value configured for broadcast traffic. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.35 | ColumnesmPortMinMcastFloodRateLimit | read-write | current | The value of the minimum multicast flood limit this value should be same type as that of the maximum value configured for multicast traffic. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.36 | ColumnesmPortFloodThresholdAction | read-write | current | The action to be taken when the broadcast traffic exceeding the maximum configured value. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.37 | ColumnesmPortMcastThresholdAction | read-write | current | The action to be taken when the multicast traffic exceeding the maximum configured value. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.38 | ColumnesmPortFlood | read-only | current | The state of the port, is it having normal or stormed broad cast traffic. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.39 | ColumnesmPortMCastStorm | read-only | current | The state of the port, is it having normal or stormed mulit cast traffic. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.40 | ColumnesmPortCfgEeeStatus | read-write | current | Allow the user to enable or disable the port EEE mode. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.41 | ColumnesmPortCfgEeeAutoNegState | read-only | current | Current autoneg state of EEE enabled port. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.1.1.42 | ColumnesmPortCfgEeeCapability | read-only | current | Current cpapbility of EEE enabled port. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2 | TablealcetherStatsTable | not-accessible | current | A list of Ethernet statistics entries. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1 | RowalcetherStatsEntry | not-accessible | current | A collection of statistics kept for a particular Ethernet interface. As an example, an instance of the etherStatsPkts object might be named alcetherStatsPkts.1 |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.1 | ColumnalcetherClearStats | read-write | current | Used to Clear all Statistics counters. By default, this object contains zero value. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.2 | ColumnalcetherLastClearStats | read-only | current | The value of SysUpTime at the time of all the statistics counters are cleared. By default, this object contains a zero value. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.3 | ColumnalcetherStatsCRCAlignErrors | read-only | current | The total number of packets received that had a length (excluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but but had… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.4 | ColumnalcetherStatsRxUndersizePkts | read-only | current | The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.5 | ColumnalcetherStatsTxUndersizePkts | read-only | current | The total number of packets transmitted that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.6 | ColumnalcetherStatsTxOversizePkts | read-only | current | The total number of packets transmitted that were longer than 1518 octets long (excluding framing bits, but including FCS octets) and were otherwise well forme… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.7 | ColumnalcetherStatsRxJabbers | read-only | current | The total number of packets received that were longer than 1518 octets (excluding framing bits, but including FCS octets), and had either a bad Frame Check Seq… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.8 | ColumnalcetherStatsRxCollisions | read-only | current | The best estimate of the total number of collisions on this Ethernet segment (in reception). Only for Ethernet Interfaces. The value returned will depend on th… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.9 | ColumnalcetherStatsTxCollisions | read-only | current | The best estimate of the total number of collisions on this Ethernet segment (in transmition). Only for Ethernet Interfaces. The value returned will depend on … |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.10 | ColumnalcetherStatsPkts64Octets | read-only | current | The total number of packets (including bad packets) received that were 64 octets in length (excluding framing bits but including FCS octets). |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.11 | ColumnalcetherStatsPkts65to127Octets | read-only | current | The total number of packets (including bad packets) received that were between 65 and 127 octets in length inclusive (excluding framing bits but including FCS … |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.12 | ColumnalcetherStatsPkts128to255Octets | read-only | current | The total number of packets (including bad packets) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.13 | ColumnalcetherStatsPkts256to511Octets | read-only | current | The total number of packets (including bad packets) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.14 | ColumnalcetherStatsPkts512to1023Octets | read-only | current | The total number of packets (including bad packets) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FC… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.15 | ColumnalcetherStatsPkts1024to1518Octets | read-only | current | The total number of packets (including bad packets) received that were between 1024 and 1518 octets in length inclusive (excluding framing bits but including F… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.16 | ColumngigaEtherStatsPkts1519to4095Octets | read-only | current | The total number of packets (including bad packets) received that were between 1519 and 4095 octets in length inclusive (excluding framing bits but including F… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.17 | ColumngigaEtherStatsPkts4096to9215Octets | read-only | current | The total number of packets (including bad packets) received that were between 4096 and 9215 octets in length inclusive (excluding framing bits but including F… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.18 | ColumnalcetherStatsPkts1519to2047Octets | read-only | current | The total number of frames(including error packets) received that were between 1519 and 2047 bytes in length inclusive (excluding framing bits but including FC… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.19 | ColumnalcetherStatsPkts2048to4095Octets | read-only | current | The total number of frames(including error packets) received that were between 2048 and 4095 bytes in length inclusive (excluding framing bits but including FC… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.20 | ColumnalcetherStatsPkts4096Octets | read-only | current | The total number of frames(including error packets) received that were greater than or equal to 4096 bytes in length inclusive (excluding framing bits but incl… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.21 | ColumnalcetherStatsRxGiantPkts | read-only | current | The total number of frames that are greater than the specified Max length value, with a valid CRC, dropped because too long. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.22 | ColumnalcetherStatsRxDribbleNibblePkts | read-only | current | The total number of frames for which a dribble nibble has been received and CRC is correct. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.23 | ColumnalcetherStatsRxLongEventPkts | read-only | current | The total number of frames for which the Carrier sense exceeds 50000 bit times for 10 Mbits/sec or 80000 bit times for 100 Mbits/sec. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.24 | ColumnalcetherStatsRxVlanTagPkts | read-only | current | The total number of frames for which Type/Length field contains the VLAN protocol identifier (0x8100). |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.25 | ColumnalcetherStatsRxControlPkts | read-only | current | The total number of frames that were recognized as control frames. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.26 | ColumnalcetherStatsRxLenChkErrPkts | read-only | current | The total number of frames for which the frame length field value in the Type/Length field does not match the actual data bytes length and is NOT a type field. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.27 | ColumnalcetherStatsRxCodeErrPkts | read-only | current | The total number of frames for which one or more nibbles were signaled as errors during reception of the frame. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.28 | ColumnalcetherStatsRxDvEventPkts | read-only | current | The total number of frames for which a RX_DV event (packet not too long enough to be valid packet) has been seen before the correct frame. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.29 | ColumnalcetherStatsRxPrevPktDropped | read-only | current | The total number of frames for which a packet has been dropped (because of too small IFG) before the correct frame. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.30 | ColumnalcetherStatsTx64Octets | read-only | current | The total number of transmitted frames of 64 bytes. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.31 | ColumnalcetherStatsTx65to127Octets | read-only | current | The total number of transmitted frames that were between 65 and 127 bytes in length inclusive (excluding framing bits but including FCS bytes). |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.32 | ColumnalcetherStatsTx128to255Octets | read-only | current | The total number of transmitted frames that were between 128 and 255 bytes in length inclusive (excluding framing bits but including FCS bytes). |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.33 | ColumnalcetherStatsTx256to511Octets | read-only | current | The total number of transmitted frames that were between 256 and 511 bytes in length inclusive (excluding framing bits but including FCS bytes). |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.34 | ColumnalcetherStatsTx512to1023Octets | read-only | current | The total number of transmitted frames that were between 512 and 1023 bytes in length inclusive (excluding framing bits but including FCS bytes). |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.35 | ColumnalcetherStatsTx1024to1518Octets | read-only | current | The total number of transmitted frames that were between 1024 and 1518 bytes in length inclusive (excluding framing bits but including FCS bytes). |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.36 | ColumnalcetherStatsTx1519to2047Octets | read-only | current | The total number of transmitted frames that were between 1519 and 2047 bytes in length inclusive (excluding framing bits but including FCS bytes). |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.37 | ColumnalcetherStatsTx2048to4095Octets | read-only | current | The total number of transmitted frames that were between 2048 and 4095 bytes in length inclusive (excluding framing bits but including FCS bytes). |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.38 | ColumnalcetherStatsTx4096Octets | read-only | current | The total number of transmitted frames that were greater than or equal to 4096 bytes in length and less than Max frame length (excluding framing bits but inclu… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.39 | ColumnalcetherStatsTxRetryCount | read-only | current | The total number of collisions that the frames faced during transmission attempts. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.40 | ColumnalcetherStatsTxVlanTagPkts | read-only | current | The total number of transmitted frames for which Type/Length field contains the VLAN protocol identifier (0x8100). |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.41 | ColumnalcetherStatsTxControlPkts | read-only | current | The total number of transmitted frames that were recognised as control frames. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.42 | ColumnalcetherStatsTxLatePkts | read-only | current | The total number of late collisions that occured beyond the collision window. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.43 | ColumnalcetherStatsTxTotalBytesOnWire | read-only | current | The total number of bytes transmitted on wire, including all bytes from collided attempts. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.44 | ColumnalcetherStatsTxLenChkErrPkts | read-only | current | The total number of transmitted frames for which the frame length field value in the Type/Length field does not match the actual data bytes length and is NOT a… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.2.1.45 | ColumnalcetherStatsTxExcDeferPkts | read-only | current | The total number of frames that were deferred in excess of 6071 nibble-times in 100 Mbps, 24287 bit-times in 10 Mbps mode. These frames are dropped.(This stat … |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.3 | TableesmHybridConfTable | not-accessible | current | A list of inactive hybrid port instances. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.3.1 | RowesmHybridConfEntry | not-accessible | current | A ESM Physical Port entry. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.3.1.1 | ColumnesmHybridPortCfgSpeed | read-write | current | The configured port line speed of this ESM port. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.3.1.2 | ColumnesmHybridPortCfgDuplexMode | read-write | current | The configured port duplex mode of this ESM port. Note: GigaEthernet support only full-duplex. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.3.1.3 | ColumnesmHybridPortCfgAutoNegotiation | read-write | current | Allow the user to enable or disable the port auto negotiation. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.3.1.4 | ColumnesmHybridPortCfgCrossover | read-write | current | Allow the user to configure port crossover. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.3.1.5 | ColumnesmHybridPortCfgFlow | read-write | current | This object is used for flow control of hybrid ports. It is similar to the dot3PauseAdminMode object in dot3PauseTable. It is used to configure pause for fiber… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.3.1.6 | ColumnesmHybridPortCfgInactiveType | read-only | current | This object is only applicable to hybrid ports . It indicates the configured inactive media type. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.3.1.7 | ColumnesmHybridPortCfgSFPType | read-only | current | This object is only applicable to fiber ports. The string indicates the type of SFP/GBIC of active media. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.4 | Tablealcether10GigTable | not-accessible | current | A list of 10 Gig specifics entries. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.4.1 | Rowalcether10GigEntry | not-accessible | current | This table will be populated with the 10 gig only entries. The management interface can use it to specify if A or B is the primary. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.4.1.1 | Columnalcether10GigPrimary | read-write | current | Setting the object to 1 will make phy A as primary, 2- phy B as pirmary. Value 3 should not be set. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5 | TableddmInfoTable | not-accessible | current | The ddmInfoTable has an entry for each SFP/XFP in the system that supports Digital Diagnostic Monitoring (DDM). The table is indexed by ifIndex. Each row in th… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1 | RowddmInfoEntry | not-accessible | current | Each row represents a particular SFP/XFP that supports Digital Diagnostic Monitoring. Entries are created and deleted internally by the system. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.1 | ColumnddmTemperature | read-only | current | The value of ddmTemperature indicates the current temperature of the SFP/XFP in 1000s of degrees Celsius. A value of -200000 indicates this object is not appli… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.2 | ColumnddmTempLowWarning | read-only | current | The value of ddmTempLowWarning indicates the temperature of the SFP/XFP in 1000s of degrees Celsius that triggers a low-warning. A value of -200000 indicates t… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.3 | ColumnddmTempLowAlarm | read-only | current | The value of ddmTempLowAlarm indicates the temperature of the SFP/XFP in 1000s of degrees Celsius that triggers a low-alarm. A value of -200000 indicates this … |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.4 | ColumnddmTempHiWarning | read-only | current | The value of ddmTempHiWarning indicates the temperature of the SFP/XFP in 1000s of degrees Celsius that triggers a hi-warning. A value of -200000 indicates thi… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.5 | ColumnddmTempHiAlarm | read-only | current | The value of ddmTempHiAlarm indicates the temperature of the SFP/XFP in 1000s of degrees Celsius that triggers a hi-alarm. A value of -200000 indicates this ob… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.6 | ColumnddmSupplyVoltage | read-only | current | The value of ddmSupplyVoltage indicates the current supply voltage of the SFP/XFP in 1000s of Volts (V). A value of -200000 indicates this object is not applic… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.7 | ColumnddmSupplyVoltageLowWarning | read-only | current | The value of ddmSupplyVoltageLowWarning indicates the supply voltage of the SFP/XFP in 1000s of Volts (V) that triggers a low-warning. A value of -200000 indic… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.8 | ColumnddmSupplyVoltageLowAlarm | read-only | current | The value of ddmSupplyVoltageLowAlarm indicates the supply voltage of the SFP/XFP in 1000s of Volts (V) that triggers a low-alarm. A value of -200000 indicates… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.9 | ColumnddmSupplyVoltageHiWarning | read-only | current | The value of ddmSupplyVoltageHiWarning indicates the supply voltage of the SFP/XFP in 1000s of Volts (V) that triggers a hi-warning. A value of -200000 indicat… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.10 | ColumnddmSupplyVoltageHiAlarm | read-only | current | The value of ddmSupplyVoltageHiAlarm indicates the supply voltage of the SFP/XFP in 1000s of Volts (V) that triggers a hi-alarm. A value of -200000 indicates t… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.11 | ColumnddmTxBiasCurrent | read-only | current | The value of ddmTxBiasCurrent indicates the current Transmit Bias Current of the SFP/XFP in 1000s of milli-Amperes (mA). A value of -200000 indicates this obje… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.12 | ColumnddmTxBiasCurrentLowWarning | read-only | current | The value of ddmTxBiasCurrentLowWarning indicates the Transmit Bias Current of the SFP/XFP in 1000s of milli-Amperes (mA) that triggers a low-warning. A value … |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.13 | ColumnddmTxBiasCurrentLowAlarm | read-only | current | The value of ddmTxBiasCurrentLowAlarm indicates the Transmit Bias Current of the SFP/XFP in 1000s of milli-Amperes (mA) that triggers a low-alarm. A value of -… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.14 | ColumnddmTxBiasCurrentHiWarning | read-only | current | The value of ddmTxBiasCurrentHiWarning indicates the Transmit Bias Current of the SFP/XFP in 1000s milli-Amperes (mA) that triggers a hi-warning. A value of -2… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.15 | ColumnddmTxBiasCurrentHiAlarm | read-only | current | The value of ddmTxBiasCurrentHiAlarm indicates the Transmit Bias Current of the SFP/XFP in 1000s milli-Amperes (mA) that triggers a hi-alarm. A value of -20000… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.16 | ColumnddmTxOutputPower | read-only | current | The value of ddmTxOutputPower indicates the current Output Power of the SFP/XFP in 1000s of dBm. A value of -200000 indicates this object is not applicable. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.17 | ColumnddmTxOutputPowerLowWarning | read-only | current | The value of ddmTxOutputPowerLowWarning indicates the Output Power of the SFP/XFP in 1000s of dBm that triggers a low-warning. A value of -200000 indicates thi… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.18 | ColumnddmTxOutputPowerLowAlarm | read-only | current | The value of ddmTxOutputPowerLowAlarm indicates the Output Power of the SFP/XFP in 1000s of dBm that triggers a low-alarm. A value of -200000 indicates this ob… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.19 | ColumnddmTxOutputPowerHiWarning | read-only | current | The value of ddmTxOutputPowerHiWarning indicates the Output Power of the SFP/XFP in 1000s of dBm that triggers a hi-alarm. A value of -200000 indicates this ob… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.20 | ColumnddmTxOutputPowerHiAlarm | read-only | current | The value of ddmTxOutputPowerHiAlarm indicates the Output Power of the SFP/XFP in 1000s of dBm that triggers a hi-alarm. A value of -200000 indicates this obje… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.21 | ColumnddmRxOpticalPower | read-only | current | The value of ddmRxOpticalPower indicates the current Received Optical Power of the SFP/XFP in 1000s of dBm. A value of -200000 indicates this object is not app… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.22 | ColumnddmRxOpticalPowerLowWarning | read-only | current | The value of ddmRxOpticalPowerLowWarning indicates the Received Optical Power of the SFP/XFP in 1000s of dBm that triggers a low-warning. A value of -200000 in… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.23 | ColumnddmRxOpticalPowerLowAlarm | read-only | current | The value of ddmRxOpticalPowerLowAlarm indicates the Received Optical Power of the SFP/XFP in 1000s of dBm that triggers a low-alarm. A value of -200000 indica… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.24 | ColumnddmRxOpticalPowerHiWarning | read-only | current | The value of ddmRxOpticalPowerHiWarning indicates the Received Optical Power of the SFP/XFP in 1000s of dBm that triggers a hi-warning. A value of -200000 indi… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.5.1.25 | ColumnddmRxOpticalPowerHiAlarm | read-only | current | The value of ddmRxOpticalPowerHiAlarm indicates the Received Optical Power of the SFP/XFP in 1000s of dBm that triggers a hi-alarm. A value of -200000 indicate… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.6 | TableesmPortModeTable | not-accessible | current | A list of ESM Physical Port Mode instances. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.6.1 | RowesmPortModeEntry | not-accessible | current | A ESM Physical Port Mode entry. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.6.1.1 | ColumnesmPortModeIndex | not-accessible | current | Valid ni/port values |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.6.1.2 | ColumnesmPortRunningMode | read-only | current | Currently configured Etna port 25,26 as 10G uplink user port or stacking port. Default is uplink 10G port. User can not set the current mode. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.6.1.3 | ColumnesmPortSavedMode | read-write | current | Next configured Etna port 25,26 as 10G uplink user port or stacking port. At boot up, it has the same value as current esmPortRunningMode. It takes some time t… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7 | TableesmTdrPortTable | not-accessible | current | The table lists the results of cable diagnostics. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1 | RowesmTdrPortEntry | not-accessible | current | An entry corresponding to each port. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.1 | ColumnesmTdrPortCableState | read-only | current | State of a cable as returned by the TDR test. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.2 | ColumnesmTdrPortValidPairs | read-only | current | The number of pairs in the cable for which the results of this test are valid. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.3 | ColumnesmTdrPortPair1State | read-only | current | The state for pair-1 of the cable as returned by the TDR test. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.4 | ColumnesmTdrPortPair1Length | read-only | current | The length for pair-1 of the cable at which the fault is detected if the pair is faulty, complete length of the cable otherwise. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.5 | ColumnesmTdrPortPair2State | read-only | current | The state for pair-2 of the cable as returned by the TDR test. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.6 | ColumnesmTdrPortPair2Length | read-only | current | The length for pair-2 of the cable at which the fault is detected if the pair is faulty, complete length of the cable otherwise. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.7 | ColumnesmTdrPortPair3State | read-only | current | The state for pair-3 of the cable as returned by the TDR test. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.8 | ColumnesmTdrPortPair3Length | read-only | current | The length for pair-3 of the cable at which the fault is detected if the pair is faulty, complete length of the cable otherwise. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.9 | ColumnesmTdrPortPair4State | read-only | current | The state for pair-4 of the cable as returned by the TDR test. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.10 | ColumnesmTdrPortPair4Length | read-only | current | The length for pair-4 of the cable at which the fault is detected if the pair is faulty, complete length of the cable otherwise. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.11 | ColumnesmTdrPortFuzzLength | read-only | current | The error in the estimated length of the cable (as returned by TDR test). |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.12 | ColumnesmTdrPortTest | read-write | current | Object used to start a TDR test or EXTENDED test on the port. When configured as on, it initiates a TDR test on the port. When configured as extendedOn, it ini… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.13 | ColumnesmTdrClearStats | read-write | current | Used to Clear TDR stats or EXTENDED stats. By default, this object contains zero value. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.14 | ColumnesmTdrResult | read-only | current | Used to give the status of API,whether API able to execute TDR test successfully or failed to executethe TDR test. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.15 | ColumnesmTdrPortExtSwapTypeChannel1 | read-only | current | Determines the channel associated with the MDI pair(cross or not for each two MDI pairs) |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.16 | ColumnesmTdrPortExtSwapTypeChannel2 | read-only | current | Determines the channel associated with the MDI pair(cross or not for each two MDI pairs) |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.17 | ColumnesmTdrPortExtPolaritySwapPair1 | read-only | current | Detects if the pairs connected with reverse polarity(reverse on one side between two conductors in one pair |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.18 | ColumnesmTdrPortExtPolaritySwapPair2 | read-only | current | Detects if the pairs connected with reverse polarity(reverse on one side between two conductors in one pair |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.19 | ColumnesmTdrPortExtPolaritySwapPair3 | read-only | current | Detects if the pairs connected with reverse polarity(reverse on one side between two conductors in one pair |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.20 | ColumnesmTdrPortExtPolaritySwapPair4 | read-only | current | Detects if the pairs connected with reverse polarity(reverse on one side between two conductors in one pair |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.21 | ColumnesmTdrPortExtSkewPair1 | read-only | current | The Skew among the four pairs of cable(delay between pairs, in n-Seconds) |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.22 | ColumnesmTdrPortExtSkewPair2 | read-only | current | The Skew among the four pairs of cable(delay between pairs, in n-Seconds) |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.23 | ColumnesmTdrPortExtSkewPair3 | read-only | current | The Skew among the four pairs of cable(delay between pairs, in n-Seconds) |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.24 | ColumnesmTdrPortExtSkewPair4 | read-only | current | The Skew among the four pairs of cable(delay between pairs, in n-Seconds) |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.25 | ColumnesmTdrPortExtAccurateCableLenPair1 | read-only | current | The Length of the cable in meters |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.26 | ColumnesmTdrPortExtAccurateCableLenPair2 | read-only | current | The Length of the cable in meters |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.27 | ColumnesmTdrPortExtAccurateCableLenPair3 | read-only | current | The Length of the cable in meters |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.28 | ColumnesmTdrPortExtAccurateCableLenPair4 | read-only | current | The Length of the cable in meters |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.29 | ColumnesmTdrPortExtDownshiftStatus | read-only | current | list downshift status of the port |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.30 | ColumnesmTdrExtResult | read-only | current | Used to give the status of API,whether API able to execute TDR Extended test successfully or failed to execute the TDR Extended test. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.31 | ColumnesmTdrCableLen | read-only | current | The Approximate Length of a normal cable(Non-Faulty) |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.7.1.32 | ColumnesmTdrPhyType | read-only | current | Lists the Marvell types |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.8 | TablealaLinkMonConfigTable | not-accessible | current | A list of Link Monitoring Configuration Parameters |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.8.1 | RowalaLinkMonConfigEntry | not-accessible | current | A collection of Link Monitoring configurations kept for a particular Ethernet interface. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.8.1.1 | ColumnalaLinkMonStatus | read-write | current | Allows the user to enable or disable Link Monitoring on the port. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.8.1.2 | ColumnalaLinkMonTimeWindow | read-write | current | Indicates the number of seconds the Link will be monitored for a port. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.8.1.3 | ColumnalaLinkMonLinkFlapThreshold | read-write | current | Indicaes the number of link flaps allowed for the specified port during the time window before the port is shutdown. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.8.1.4 | ColumnalaLinkMonLinkErrorThreshold | read-write | current | Indicates the number of link errors allowed on Rx for the specified port during the time window before the port is shutdown. The errors are the MAC errors that… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.9 | TablealaLinkMonStatsTable | not-accessible | current | A list of Link Monitoring Statistics |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.9.1 | RowalaLinkMonStatsEntry | not-accessible | current | A collection of Link Monitoring statistics for a particular Ethernet interface. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.9.1.1 | ColumnalaLinkMonStatsClearStats | read-write | current | Used to Clear all Statistics counters. The value reset (1) indicates that Link Monitoring shuold all statistic counters related to the particular port. By defa… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.9.1.2 | ColumnalaLinkMonStatsPortState | read-only | current | Indicates the status of the port. up(1) means the port is physically up, down(2) means the port is physically down, shutdown(3) means the interface is shutdown… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.9.1.3 | ColumnalaLinkMonStatsCurrentLinkFlaps | read-only | current | Indicates the number of Link flaps in the current time window. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.9.1.4 | ColumnalaLinkMonStatsCurrentErrorFrames | read-only | current | Indicates the number of error frames in the current time window. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.9.1.5 | ColumnalaLinkMonStatsCurrentCRCErrors | read-only | current | Indicates the number of CRC errors in the current time window. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.9.1.6 | ColumnalaLinkMonStatsCurrentLostFrames | read-only | current | Indicates the number of Rx Lost frames in the current time window. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.9.1.7 | ColumnalaLinkMonStatsCurrentAlignErrors | read-only | current | Indicates the number of Rx alignment frames in the current time window. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.9.1.8 | ColumnalaLinkMonStatsCurrentLinkErrors | read-only | current | Indicates the sum of all the MAC Errors within the current time window. i.e., the sum of alaLinkMonStatsCurrentErrorFrames, alaLinkMonStatsCurrentCRCErrors, al… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.9.1.9 | ColumnalaLinkMonStatsTotalLinkFlaps | read-only | current | Indicates the total number of link flaps across all the time windows. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.9.1.10 | ColumnalaLinkMonStatsTotalLinkErrors | read-only | current | Indicates the total number of link errors across all the time windows. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.10 | TablealaLFPGroupTable | not-accessible | current | A list of Link Fault Propagation Grooups and their status |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.10.1 | RowalaLFPGroupEntry | not-accessible | current | The list of Link Fault Propagation group id and status for each group |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.10.1.1 | ColumnalaLFPGroupId | accessible-for-notify | current | Indicates the unique group id for Link Fault Propagation (LFP). |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.10.1.2 | ColumnalaLFPGroupAdminStatus | read-create | current | Indicates the admin status of the group. disable(0) means link fault propagation, is disbaled. enable(1) means link fault propagation is enabled |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.10.1.3 | ColumnalaLFPGroupOperStatus | read-only | current | Indicates the operational status of the group. down(0) means all the source ports are down, up(1) means atleast one source port in the group is up. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.10.1.4 | ColumnalaLFPGroupWaitToShutdown | read-create | current | 0 - Disable wait to shutdown timer Range 5 - 300, in multiples of 5. After expiry of this timer all destination ports will be shutdown |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.10.1.5 | ColumnalaLFPGroupRowStatus | read-create | current | Row Status for initiating a MIB retrieval request. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.11 | TablealaLFPConfigTable | not-accessible | current | A list of Link Fault Propagation port and port type of each LFP group |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.11.1 | RowalaLFPConfigEntry | not-accessible | current | A list of Link Fault Propagation port and port type of each LFP group |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.11.1.1 | ColumnalaLFPConfigPort | accessible-for-notify | current | Indicates ifindex of source/destination port for a LFP Group. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.11.1.2 | ColumnalaLFPConfigPortType | read-create | current | Indicates the type of port, (1) means the port is destination port and (2) means the port is a source port for a LFP Group. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.11.1.3 | ColumnalaLFPConfigRowStatus | read-create | current | Row Status for initiating a MIB retrieval request. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.12 | TableesmSlotInfoTable | not-accessible | current | ESM Slot information table. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.12.1 | RowesmSlotInfoEntry | not-accessible | current | A ESM Physical slot entry. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.12.1.1 | ColumnesmSlotNumber | read-only | current | The slot number on stack. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.12.1.2 | ColumnesmNumberOfUserPorts | read-only | current | The number of user ports on specified slot number. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.13 | TableesmPtpStatsTable | not-accessible | current | The table lists the Statistics params of PTP. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.13.1 | RowesmPtpStatsEntry | not-accessible | current | An entry corresponding to each port. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.13.1.1 | ColumnesmPtpStatsIngPtpv2 | read-only | current | The number of PTP V2 packets ingress in to the port |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.13.1.2 | ColumnesmPtpStatsIngPtpv1 | read-only | current | The number of PTP V1 packets ingress in to the port |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.13.1.3 | ColumnesmPtpStatsIngPtpDrop | read-only | current | The number of PTP packets dropped at ingress by the port |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.13.1.4 | ColumnesmPtpStatsIngPtpPigBag | read-only | current | The number of PTP Piggy Bag added to ingress packets in the port |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.13.1.5 | ColumnesmPtpStatsEgrPtpv2 | read-only | current | The number of PTP V2 packets egress from the port |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.13.1.6 | ColumnesmPtpStatsEgrPtpv1 | read-only | current | The number of PTP V1 packets egress from the port |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.13.1.7 | ColumnesmPtpStatsEgrPtpDrop | read-only | current | The number of PTP packets dropped at egress by the port |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.13.1.8 | ColumnesmPtpStatsEgrPtpUpdateRes | read-only | current | The number of PTP residence time updated packets in the port |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14 | TableesmStackPortTable | not-accessible | current | A list of Stacking Link statistics |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1 | RowesmStackPortConfEntry | not-accessible | current | A collection of statistics kept for a Stacking Link. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.1 | ColumnesmStackPortIfIndex | read-only | current | A unique value, greater than zero, for each stack port interface. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.2 | ColumnesmStackPortSlotNum | read-only | current | The on-board slot number of stack ports. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.3 | ColumnesmStackPortInOctets | read-only | current | The total number of octets received on the stacking interface, including framing characters. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.4 | ColumnesmStackPortOutOctets | read-only | current | The total number of octets transmitted out of the stacking interface, including framing characters. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.5 | ColumnesmStackPortInUcastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were not addressed to a multicast or broadcast address at this sub-layer. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.6 | ColumnesmStackPortOutUcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were not addressed to a multicast or broadcast address at this sub-… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.7 | ColumnesmStackPortInMulticastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a multicast address at this sub-layer. For a MAC layer prot… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.8 | ColumnesmStackPortOutMulticastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a multicast address at this sub-layer, including … |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.9 | ColumnesmStackPortInBroadcastPkts | read-only | current | The number of packets, delivered by this sub-layer to a higher (sub-)layer, which were addressed to a broadcast address at this sub-layer. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.10 | ColumnesmStackPortOutBroadcastPkts | read-only | current | The total number of packets that higher-level protocols requested be transmitted, and which were addressed to a broadcast address at this sub-layer, including … |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.11 | ColumnesmStackPortInPauseFrames | read-only | current | A count of MAC Control frames received on stacking interface with an opcode indicating the PAUSE operation. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.12 | ColumnesmStackPortOutPauseFrames | read-only | current | A count of MAC Control frames transmitted on stacking interface with an opcode indicating the PAUSE operation. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.13 | ColumnesmStackPortStatsAlignmentErrors | read-only | current | A count of frames received on the stacking interface that are not an integral number of octets in length and do not pass the FCS check. The count represented b… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.14 | ColumnesmStackPortStatsFCSErrors | read-only | current | A count of frames received on the stacking interface that are an integral number of octets in length but do not pass the FCS check. This count does not include… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.15 | ColumnesmStackPortInErrors | read-only | current | For a stacking interface, the number of inbound packets that contained errors preventing them from being deliverable to a higher-layer protocol. For character-… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.16 | ColumnesmStackPortOutErrors | read-only | current | For a stacking interface, the number of outbound packets that could not be transmitted because of errors. For character-oriented or fixed-length interfaces, th… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.17 | ColumnesmStackPortInDiscards | read-only | current | The number of inbound packets which were chosen to be discarded even though no errors had been detected to prevent their being deliverable to a higher-layer pr… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.18 | ColumnesmStackPortOutDiscards | read-only | current | The number of outbound packets which were chosen to be discarded even though no errors had been detected to prevent their being transmitted. One possible reaso… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.19 | ColumnesmStackPortTxCollisions | read-only | current | The estimate of the total number of collisions. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.20 | ColumnesmStackPortRxUndersizePkts | read-only | current | The total number of packets received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.21 | ColumnesmStackPortTxUndersizePkts | read-only | current | The total number of packets transmitted that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.22 | ColumnesmStackPortRxOversizePkts | read-only | current | The total number of packets received that were longer than 1518 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.23 | ColumnesmStackPortTxOversizePkts | read-only | current | The total number of packets transmitted that were longer than 1518 octets long (excluding framing bits, but including FCS octets) and were otherwise well forme… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.24 | ColumnesmStackPortAutoSpeed | read-only | current | The automatically detected port line speed of the stack port. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.2.14.1.25 | ColumnesmStackPortClearStats | read-write | current | Used to Clear all Stack Port Statistics counters. By default, this object contains zero value. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.4 | NodeddmConfiguration | |||
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.4.1 | ScalarddmConfig | read-write | current | This object enables/disables DDM software feature in the system. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.4.2 | ScalarddmTrapConfig | read-write | current | This objects enables/disables traps for DDM warning/alarm threshold violations. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.4.3 | ScalarddmNotificationType | accessible-for-notify | current | This object defines the trap type for monitored DDM parameters. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.5 | NodeesmViolationRecovery | |||
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.5.1 | ScalaresmViolationRecoveryTrap | read-write | current | This objects enables/disables traps for user-port shutdown |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.5.2 | ScalaresmViolationRecoveryTime | read-write | current | 0 - Disable the timer 30 - 600 - timeout value to re-enable the UserPort ports |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.5.3 | ScalaresmViolationRecoveryNotificationType | accessible-for-notify | current | This object defines the trap type for monitored violation-recovery parameters. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.5.4 | ScalaresmViolationRecoveryMaximum | read-write | current | 0 - recovery mechanism is disabled 1 - 50 - The maximum number of recovery attempts before a port is shudown. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.5.5 | TablealaPortViolationRecoveryTable | not-accessible | current | A list of Interface Violation Recovery Configuration Parameters |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.5.5.1 | RowalaPortViolationRecoveryEntry | not-accessible | current | A collection of Interface Violation Recovery configurations kept for a particular Ethernet interface. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.5.5.1.1 | ColumnalaPortViolationRecoveryTime | read-write | current | -1 - value in scalar object esmViolationRecoveryTime 0 - Disable the timer 30 - 600 - timeout value to re-enable the ports that have been shutdown |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.5.5.1.2 | ColumnalaPortViolationRecoveryMaximum | read-write | current | -1 - value in scalar object esmViolationRecoveryMaximum 0 - recovery mechanism is disabled 1 - 50 - The maximum number of recovery attempts before a port is sh… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.6 | NodeesmDBChangeRebootReqdMIBObjects | |||
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.6.1 | ScalaralaEsmOldDb | accessible-for-notify | current | This object specifies the module, either SFP+ daughter module or CX4 stacking module, which was present before inserting a new module (either CX4 or SFP+). |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.6.2 | ScalaralaEsmNewDb | accessible-for-notify | current | This object specifies the module, either SFP+ daughter module or CX4 stacking module, which has been inserted. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.6.3 | ScalaralaEsmModuleChangeString | accessible-for-notify | current | This object specifies the string value describing reboot is required to activate the new module. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.7 | NodeesmStormThresholdViolation | |||
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.8 | NodealaDBChangeMIBObjects | |||
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.8.1 | ScalaralaOldDb | accessible-for-notify | current | This object specifies the daughter module, which was present before inserting a new module. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.8.2 | ScalaralaNewDb | accessible-for-notify | current | This object specifies the daughter module, which has been inserted. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.8.3 | ScalaralaModuleChangeString | accessible-for-notify | current | This object specifies the string value describing 1) reboot is required to activate the new module. 2) New module can be used without reboot 3) No expansion mo… |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.9 | NodeptpConfiguration | |||
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.1.9.1 | ScalarptpConfig | read-write | current | This object enables/disables PTP software feature in the system. |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.2 | NodealcatelIND1PortMIBConformance | |||
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.1 | NodealcatelIND1PortMIBCompliances | |||
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.1.1 | ComplianceesmConfPortCompliance | current | The compliance statement for the configuration of Ethernet ports. | |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.1.2 | CompliancealcEtherStatsCompliance | current | The compliance statement for the Statistics of the Ethernet ports. | |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.1.3 | ComplianceesmSlotInfoCompliance | current | The compliance statement for the esm per slot information. | |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2 | NodealcatelIND1PortMIBGroups | |||
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2.1 | GroupesmConfMIBGroup | current | A collection of objects to support the management of global configuration parameters of the Ethernet ports. | |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2.2 | GroupesmDetectedConfMIBGroup | current | A collection of objects to support the Detected configuration parameters of the Ethernet ports. | |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2.3 | GroupalcEtherStatsMIBGroup | current | A collection of objects to provide all the statistics related to the Ethernet and GigaEthernert ports. | |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2.4 | GroupalcPortNotificationGroup | current | The Port MIB Notification Group. | |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2.5 | GroupesmPortModeMIBGroup | current | A collection of objects to support the management of global configuration parameters of the stacking ports. | |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2.6 | GroupddmInfoGroup | current | A collection of objects to provide digital diagnostics information related to SFPs, XFPs, and SFP+s. | |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2.7 | GroupddmConfigGroup | current | A collection of objects to allow configuration of DDM and DDM traps. | |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2.8 | GroupddmNotificationsGroup | current | A collection of notifications used to indicate DDM threshold violations. | |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2.9 | GroupviolationRecoveryGroup | current | A collection of objects to allow configuration of violationRecovery. | |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2.10 | GroupviolationNotificationsGroup | current | A collection of notifications used to indicate esm violation recovery timeout. | |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2.11 | GroupalaDyingGaspNotificationGroup | current | A collection of notifications used to indicate dying gasp trap. | |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2.12 | GroupesmTdrGroup | current | A collection of objects to provide TDR information | |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2.13 | GroupalaEsmDBObjGroup | current | A collection of objects to provide DB change trap information. | |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2.14 | GroupalsEsmDBChangeNotificationGroup | current | A collection of notifications used to indicate DB change trap. | |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2.15 | GroupalaLinkMonConfigMIBGroup | current | A collection of objects to support the Link Monitoring Configurations on the ports. | |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2.16 | GroupalaLinkMonStatsMIBGroup | current | A collection of objects to provide all the statistics related to the Link Monitoring on the ports. | |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2.17 | GroupalaLFPGroupMIBGroup | current | A collection of objects to configure Link Fault Propagation Group, Wait to shutdown timer and admin staus of group. | |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2.18 | GroupalaLFPConfigMIBGroup | current | A collection of objects to configure a port and port type for a Link Fault Propagation Group. | |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2.19 | GroupalaPortViolationRecoveryMIBGroup | current | The per port configuration Parameters for Interface Violation Recovery Mechanism | |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2.20 | GroupesmSlotInfoGroup | current | A collection of objects to provide number of user port information per slot basis. | |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2.21 | GroupesmConfTrapGroup | current | Specifies the BD type. | |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2.22 | Groupalcether10GigGroup | current | populated with the 10 gig only entries. | |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2.23 | GroupesmHybridConfGroup | current | ||
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2.24 | GroupesmPortViolationNotificationGroup | current | A collection of notifications used to indicate port violation trap. | |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2.25 | GroupesmDrvDyingGaspNotificationGroup | current | A collection of notifications used to indicate dying gasp trap. | |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2.26 | GroupesmStormThresholdViolationGroup | current | A collection of notifications used to indicate esm storm threshold violation. | |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2.27 | GroupptpConfigGroup | current | A collection of objects to allow configuration of PTP. | |
| 1.3.6.1.4.1.6486.800.1.2.1.5.1.2.2.28 | GroupesmStackPortConfMIBGroup | current | A collection of objects to support the management of global configuration parameters of the stack ports. | |
| 1.3.6.1.4.1.6486.800.1.3.2.6.0.1 | NotificationesmDrvTrapDropsLink | current | When the Ethernet code drops the link because of excessive errors, a Trap is sent. | |
| 1.3.6.1.4.1.6486.800.1.3.2.6.0.3 | NotificationalaDyingGaspTrap | current | Dying Gasp trap. | |
| 1.3.6.1.4.1.6486.800.1.3.2.6.0.4 | NotificationesmStormThresholdViolationStatus | current | This object notifies management station if User-Port ports gets the ingress traffic inflow above the configured value. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AlaDBType | INTEGER { none (0), kf2SfpPlusDB (1), kf2HDMIStackingDB (2), kf2RJ45DB (3), kf2SfpDB (4) } | current | Specifies the DB type. |
| EsmDBType | INTEGER { sfpPlusDaughterModule (1), cx4StackingModule (2) } | current | Specifies the BD type. |