MIB Viewer

ALCATEL-IND1-QOS-MIB

1229 objects
QoS and Filtering MIB
Imported Objects
ALCATEL-IND1-BASEsoftentIND1QoS
IF-MIBInterfaceIndex
IPV6-TCIpv6Address
SNMPv2-CONFMODULE-COMPLIANCE OBJECT-GROUP
SNMPv2-SMICounter32 Counter64 Integer32 IpAddress MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE
SNMPv2-TCDisplayString MacAddress RowStatus
OIDNameAccessStatusDescription
1.3.6.1.4.1.6486.800.1.2.1.22.1IdentityalaQoSMIBQoS and Filtering MIB
1.3.6.1.4.1.6486.800.1.2.1.22.1.1IdentityalaQoSMIBObjectscurrentBranch for QoS Managed Objects.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1TablealaQoSRuleTablenot-accessiblecurrentTable of QoS Rule definitions
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1RowalaQoSRuleEntrynot-accessiblecurrentDefinition of QoS Rule
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.1ColumnalaQoSRuleNamenot-accessiblecurrentName of rule
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.2ColumnalaQoSRuleEnabledread-createcurrentIs this rule enabled or not
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.3ColumnalaQoSRuleSourceread-createcurrentWhat entity created the rule.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.4ColumnalaQoSRulePrecedenceread-createcurrentPrecedence value for rule. Rules are evaluated from higher precedence to lower. If rules have equal precedence, they are evaluated in the order they are receiv…
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.5ColumnalaQoSRuleConditionread-createcurrentName of the condition to use
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.6ColumnalaQoSRuleActionread-createcurrentName of the action to use
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.7ColumnalaQoSRuleReflexiveread-createcurrentIndicator to tell if the rule is reflexive. Reflexive rules allow specific return connections that would normally be denied.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.8ColumnalaQoSRuleSaveread-createcurrentIndicator to tell whether to write out the rule during snapshot commands.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.9ColumnalaQoSRuleLogread-createcurrentIndicator to tell whether to log matches to this rule in the QoS log.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.10ColumnalaQoSRuleMatchesread-onlycurrentNumber of times this rule has been matched.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.11ColumnalaQoSRuleEnforcedread-onlycurrentIs this rule currenly being enforced on the switch.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.12ColumnalaQoSRuleActiveread-onlycurrentIs this rule enforcable by the switch.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.13ColumnalaQoSRuleRowStatusread-createcurrentUsed to create/delete rules according to the RowStatus convention
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.14ColumnalaQoSRuleValidityPeriodread-createcurrentName of the validity period to use
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.15ColumnalaQoSRuleValidityPeriodStatusread-createcurrentStatus field indicating whether there is a validity period associated with this rule
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.16ColumnalaQoSRuleLogIntervalread-createcurrentHow often to look for packets matching this rule when logging. When 0 log as many as possible.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.17ColumnalaQoSRuleCountTyperead-createcurrentWhich rule statistics counters to update if not all are available
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.18ColumnalaQoSRulePacketCountread-onlycurrentCounter for packets patching this rule
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.19ColumnalaQoSRuleByteCountread-onlycurrentCounter for bytes matching this rule
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.20ColumnalaQoSRuleExcessPacketCountread-onlycurrentCounter for packets out of bandwidth parameters
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.21ColumnalaQoSRuleExcessByteCountread-onlycurrentCounter for bytes out of bandwidth parameters
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.22ColumnalaQoSRuleTyperead-onlycurrentThe type of rule this is. Each bit represents the following: 0x1 = bridged 0x2 = routed 0x4 = multicast
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.23ColumnalaQoSRuleTrapEventsread-createcurrentSend SNMP trap when 'qos user-port shutdown' param or rule having action=port-disable is matched/invoked?
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.24ColumnalaQoSRuleDefaultListread-createcurrentThis rule belongs to the default policy list.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.25ColumnalaQoSRuleGreenCountread-onlycurrentCounter for the number of packets being green compliant.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.26ColumnalaQoSRuleYellowCountread-onlycurrentCounter for the number of packets being yellow compliant.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.27ColumnalaQoSRuleRedCountread-onlycurrentCounter for the number of packets being red compliant.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.28ColumnalaQoSRuleNonGreenCountread-onlycurrentCounter for the number of packets being non-green compliant.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.29ColumnalaQoSRuleNonRedCountread-onlycurrentCounter for the number of packets being non-red compliant.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.30ColumnalaQoSRuleAccountingread-createcurrentFlag for enabling/disbling the accounting mode.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.31ColumnalaQoSRulePacketRateread-onlycurrentShows the packet per second rate
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.32ColumnalaQoSRuleAccPacketCountread-onlycurrentCounter for packets patching this rule
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.33ColumnalaQoSRuleAccByteCountread-onlycurrentCounter for packets patching this rule
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.1.1.34ColumnalaQoSRuleBitRateread-onlycurrentShows the Bits per second rate
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2TablealaQoSAppliedRuleTablenot-accessiblecurrentTable of QoS AppliedRule definitions
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1RowalaQoSAppliedRuleEntrynot-accessiblecurrentDefinition of QoS AppliedRule
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.1ColumnalaQoSAppliedRuleNamenot-accessiblecurrentName of rule
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.2ColumnalaQoSAppliedRuleEnabledread-onlycurrentIs this rule enabled or not
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.3ColumnalaQoSAppliedRuleSourceread-onlycurrentWhat entity created the rule.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.4ColumnalaQoSAppliedRulePrecedenceread-onlycurrentPrecedence value for rule. Rules are evaluated from higher precedence to lower. If rules have equal precedence, they are evaluated in the order they are receiv…
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.5ColumnalaQoSAppliedRuleConditionread-onlycurrentName of the condition to use
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.6ColumnalaQoSAppliedRuleActionread-onlycurrentName of the action to use
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.7ColumnalaQoSAppliedRuleReflexiveread-onlycurrentIndicator to tell if the rule is reflexive. Reflexive rules allow specific return connections that would normally be denied.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.8ColumnalaQoSAppliedRuleSaveread-onlycurrentIndicator to tell whether to write out the rule during snapshot commands.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.9ColumnalaQoSAppliedRuleLogread-onlycurrentIndicator to tell whether to log matches to this rule in the QoS log.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.10ColumnalaQoSAppliedRuleMatchesread-onlycurrentNumber of times this rule has been matched.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.11ColumnalaQoSAppliedRuleEnforcedread-onlycurrentIs this rule currenly being enforced on the switch.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.12ColumnalaQoSAppliedRuleActiveread-onlycurrentIs this rule enforcable by the switch.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.13ColumnalaQoSAppliedRuleRowStatusread-onlycurrentUsed to create/delete rules according to the RowStatus convention
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.14ColumnalaQoSAppliedRuleValidityPeriodread-onlycurrentName of the validity period to use
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.15ColumnalaQoSAppliedRuleValidityPeriodStatusread-onlycurrentStatus field indicating whether there is a validity period associated with this rule
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.16ColumnalaQoSAppliedRuleLogIntervalread-onlycurrentHow often to look for packets matching this rule when logging. When 0 log as many as possible.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.17ColumnalaQoSAppliedRuleCountTyperead-onlycurrentWhich rule statistics counters to update if not all are available
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.18ColumnalaQoSAppliedRulePacketCountread-onlycurrentCounter for packets patching this rule
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.19ColumnalaQoSAppliedRuleByteCountread-onlycurrentCounter for bytes matching this rule
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.20ColumnalaQoSAppliedRuleExcessPacketCountread-onlycurrentCounter for packets out of bandwidth parameters
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.21ColumnalaQoSAppliedRuleExcessByteCountread-onlycurrentCounter for bytes out of bandwidth parameters
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.22ColumnalaQoSAppliedRuleTyperead-onlycurrentThe type of rule this is. Each bit represents the following: 0x1 = bridged 0x2 = routed 0x4 = multicast
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.23ColumnalaQoSAppliedRuleTrapEventsread-createcurrentSend SNMP trap when 'qos user-port shutdown' param or rule having action=port-disable is matched/invoked?
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.24ColumnalaQoSAppliedRuleDefaultListread-createcurrentThis rule belongs to the default policy list.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.25ColumnalaQoSAppliedRuleGreenCountread-onlycurrentCounter for the number of packets being green compliant.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.26ColumnalaQoSAppliedRuleYellowCountread-onlycurrentCounter for the number of packets being yellow compliant.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.27ColumnalaQoSAppliedRuleRedCountread-onlycurrentCounter for the number of packets being red compliant.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.28ColumnalaQoSAppliedRuleNonGreenCountread-onlycurrentCounter for the number of packets being non-green compliant.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.29ColumnalaQoSAppliedRuleNonRedCountread-onlycurrentCounter for the number of packets being non-red compliant.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.30ColumnalaQoSAppliedRuleAccountingread-onlycurrentFlag for enabling/disabling the accounting mode.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.31ColumnalaQoSAppliedRulePacketRateread-onlycurrentShows the packet per second rate
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.32ColumnalaQoSAppliedRuleAccPacketCountread-onlycurrentCounter for packets patching this rule
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.33ColumnalaQoSAppliedRuleAccByteCountread-onlycurrentCounter for packets patching this rule
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.2.1.34ColumnalaQoSAppliedRuleBitRateread-onlycurrentShows the Bits per second rate
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3TablealaQoSConditionTablenot-accessiblecurrentTable of QoS Condition definitions
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1RowalaQoSConditionEntrynot-accessiblecurrentDefinition of QoS Condition
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.1ColumnalaQoSConditionNamenot-accessiblecurrentName of condition
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.2ColumnalaQoSConditionSourceread-createcurrentWhat entity created the condition.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.3ColumnalaQoSConditionSourceSlotread-createcurrentSource physical slot used for traffic classification When 0, the port identifies an aggregate
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.4ColumnalaQoSConditionSourceSlotStatusread-createcurrentStatus field indicating whether the source physical slot and port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.5ColumnalaQoSConditionSourcePortread-createcurrentSource physical port range start to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.6ColumnalaQoSConditionSourcePortGroupread-createcurrentSource physical port group to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.7ColumnalaQoSConditionSourcePortGroupStatusread-createcurrentStatus field indicating whether the source physical port group needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.8ColumnalaQoSConditionDestinationSlotread-createcurrentDestination physical slot used for traffic classification When 0, the port identifies an aggregate
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.9ColumnalaQoSConditionDestinationSlotStatusread-createcurrentStatus field indicating whether the destination physical slot and port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.10ColumnalaQoSConditionDestinationPortread-createcurrentDestination physical port range start to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.11ColumnalaQoSConditionDestinationPortGroupread-createcurrentDestination physical port group to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.12ColumnalaQoSConditionDestinationPortGroupStatusread-createcurrentStatus field indicating whether the destination physical port group needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.13ColumnalaQoSConditionSourceInterfaceTyperead-createcurrentSource physical interface type to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.14ColumnalaQoSConditionSourceInterfaceTypeStatusread-createcurrentStatus field indicating whether the source physical interface type needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.15ColumnalaQoSConditionDestinationInterfaceTyperead-createcurrentDestination physical interface type to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.16ColumnalaQoSConditionDestinationInterfaceTypeStatusread-createcurrentStatus field indicating whether the destination physical interface type needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.17ColumnalaQoSConditionSourceMacAddrread-createcurrentSource MAC address to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.18ColumnalaQoSConditionSourceMacAddrStatusread-createcurrentStatus field indicating whether the source MAC address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.19ColumnalaQoSConditionSourceMacMaskread-createcurrentSource MAC mask to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.20ColumnalaQoSConditionSourceMacGroupread-createcurrentSource MAC group to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.21ColumnalaQoSConditionSourceMacGroupStatusread-createcurrentStatus field indicating whether the source MAC group needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.22ColumnalaQoSConditionDestinationMacAddrread-createcurrentDestination MAC address to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.23ColumnalaQoSConditionDestinationMacAddrStatusread-createcurrentStatus field indicating whether the destination MAC address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.24ColumnalaQoSConditionDestinationMacMaskread-createcurrentDestination MAC mask to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.25ColumnalaQoSConditionDestinationMacGroupread-createcurrentDestination MAC group to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.26ColumnalaQoSConditionDestinationMacGroupStatusread-createcurrentStatus field indicating whether the destination MAC group needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.27ColumnalaQoSConditionSourceVlanread-createcurrentSource VLAN to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.28ColumnalaQoSConditionSourceVlanStatusread-createcurrentStatus field indicating whether the source VLAN needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.29ColumnalaQoSConditionDestinationVlanread-createcurrentDestination VLAN to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.30ColumnalaQoSConditionDestinationVlanStatusread-createcurrentStatus field indicating whether the destination VLAN needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.31ColumnalaQoSCondition8021pread-createcurrent802.1p value to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.32ColumnalaQoSCondition8021pStatusread-createcurrentStatus field indicating whether the 802.1p value needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.33ColumnalaQoSConditionSourceIpAddrread-createcurrentSource IP address to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.34ColumnalaQoSConditionSourceIpAddrStatusread-createcurrentStatus field indicating whether the source IP address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.35ColumnalaQoSConditionSourceIpMaskread-createcurrentSource IP mask to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.36ColumnalaQoSConditionSourceNetworkGroupread-createcurrentSource network group to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.37ColumnalaQoSConditionSourceNetworkGroupStatusread-createcurrentStatus field indicating whether the source network group needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.38ColumnalaQoSConditionDestinationIpAddrread-createcurrentDestination IP address to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.39ColumnalaQoSConditionDestinationIpAddrStatusread-createcurrentStatus field indicating whether the destination IP address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.40ColumnalaQoSConditionDestinationIpMaskread-createcurrentDestination IP mask to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.41ColumnalaQoSConditionDestinationNetworkGroupread-createcurrentDestination network group to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.42ColumnalaQoSConditionDestinationNetworkGroupStatusread-createcurrentStatus field indicating whether the destination network group needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.43ColumnalaQoSConditionMulticastIpAddrread-createcurrentMulticast IP address to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.44ColumnalaQoSConditionMulticastIpAddrStatusread-createcurrentStatus field indicating whether the multicast IP address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.45ColumnalaQoSConditionMulticastIpMaskread-createcurrentMulticast IP mask to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.46ColumnalaQoSConditionMulticastNetworkGroupread-createcurrentMulticast network group to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.47ColumnalaQoSConditionMulticastNetworkGroupStatusread-createcurrentStatus field indicating whether the multicast network group needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.48ColumnalaQoSConditionTosread-createcurrentTOS value to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.49ColumnalaQoSConditionTosStatusread-createcurrentStatus field indicating whether the TOS value & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.50ColumnalaQoSConditionTosMaskread-createcurrentTOS mask to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.51ColumnalaQoSConditionDscpread-createcurrentDSCP value to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.52ColumnalaQoSConditionDscpStatusread-createcurrentStatus field indicating whether the DSCP value & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.53ColumnalaQoSConditionDscpMaskread-createcurrentDSCP mask to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.54ColumnalaQoSConditionIpProtocolread-createcurrentIP protocol to use for traffic classification.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.55ColumnalaQoSConditionIpProtocolStatusread-createcurrentStatus field indicating whether the IP protocol needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.56ColumnalaQoSConditionSourceIpPortread-createcurrentSource IP port range start to use for traffic classification.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.57ColumnalaQoSConditionSourceIpPortStatusread-createcurrentStatus field indicating whether the source IP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.58ColumnalaQoSConditionDestinationIpPortread-createcurrentDestination IP port range start to use for traffic classification.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.59ColumnalaQoSConditionDestinationIpPortStatusread-createcurrentStatus field indicating whether the destination IP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.60ColumnalaQoSConditionServiceread-createcurrentName of service to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.61ColumnalaQoSConditionServiceStatusread-createcurrentStatus field indicating whether the service needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.62ColumnalaQoSConditionServiceGroupread-createcurrentName of service group to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.63ColumnalaQoSConditionServiceGroupStatusread-createcurrentStatus field indicating whether the service group needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.64ColumnalaQoSConditionIcmpTyperead-createcurrentICMP type to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.65ColumnalaQoSConditionIcmpTypeStatusread-createcurrentStatus field indicating whether the ICMP type needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.66ColumnalaQoSConditionIcmpCoderead-createcurrentICMP code to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.67ColumnalaQoSConditionIcmpCodeStatusread-createcurrentStatus field indicating whether the ICMP code needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.68ColumnalaQoSConditionDlciread-createcurrentDLCI to use to traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.69ColumnalaQoSConditionDlciStatusread-createcurrentStatus field indicating whether the DLCI needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.70ColumnalaQoSConditionRowStatusread-createcurrentUsed to create/delete conditions according to the RowStatus convention
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.71ColumnalaQoSConditionSourcePortEndread-createcurrentSource physical port range end to use for traffic classification. Must be greater than port range start to indicate a range. When '1', use source port as a sin…
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.72ColumnalaQoSConditionDestinationPortEndread-createcurrentDestination physical port range end to use for traffic classification. Must be greater than port range start to indicate a range. When '1', use destination por…
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.73ColumnalaQoSConditionSourceIpPortEndread-createcurrentSource IP port range end to use for traffic classification. Must be greater than source IP port range start to indicate a range. When '0', use source IP port a…
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.74ColumnalaQoSConditionDestinationIpPortEndread-createcurrentDestination IP port range end to use for traffic classification. Must be greater than destination IP port range start to indicate a range. When '0', use destin…
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.75ColumnalaQoSConditionSourceTcpPortread-createcurrentSource TCP port range start to use for traffic classification.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.76ColumnalaQoSConditionSourceTcpPortStatusread-createcurrentStatus field indicating whether the source TCP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.77ColumnalaQoSConditionSourceTcpPortEndread-createcurrentSource TCP port range end to use for traffic classification. Must be greater than source TCP port range start to indicate a range. When '0', use source TCP por…
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.78ColumnalaQoSConditionDestinationTcpPortread-createcurrentDestination TCP port range start to use for traffic classification.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.79ColumnalaQoSConditionDestinationTcpPortStatusread-createcurrentStatus field indicating whether the destination TCP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.80ColumnalaQoSConditionDestinationTcpPortEndread-createcurrentDestination TCP port range end to use for traffic classification. Must be greater than destination TCP port range start to indicate a range. When '0', use dest…
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.81ColumnalaQoSConditionSourceUdpPortread-createcurrentSource UDP port range start to use for traffic classification.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.82ColumnalaQoSConditionSourceUdpPortStatusread-createcurrentStatus field indicating whether the source UDP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.83ColumnalaQoSConditionSourceUdpPortEndread-createcurrentSource UDP port range end to use for traffic classification. Must be greater than source UDP port range start to indicate a range. When '0', use source UDP por…
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.84ColumnalaQoSConditionDestinationUdpPortread-createcurrentDestination UDP port range start to use for traffic classification.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.85ColumnalaQoSConditionDestinationUdpPortStatusread-createcurrentStatus field indicating whether the destination UDP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.86ColumnalaQoSConditionDestinationUdpPortEndread-createcurrentDestination UDP port range end to use for traffic classification. Must be greater than destination UDP port range start to indicate a range. When '0', use dest…
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.87ColumnalaQoSConditionEthertyperead-createcurrentEthertype value to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.88ColumnalaQoSConditionEthertypeStatusread-createcurrentStatus field indicating whether the ethertype value needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.89ColumnalaQoSConditionTcpFlagsread-createcurrentUse any/all specifieid TCP flags for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.90ColumnalaQoSConditionTcpFlagsStatusread-createcurrentStatus field indicating whether the TCP flag bits needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.91ColumnalaQoSConditionTcpFlagsValread-createcurrentTCP flags values used for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.92ColumnalaQoSConditionTcpFlagsValStatusread-createcurrentNot used
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.93ColumnalaQoSConditionTcpFlagsMaskread-createcurrentMask of TCP flags bits used for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.94ColumnalaQoSConditionTcpFlagsMaskStatusread-createcurrentNot used
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.95ColumnalaQoSConditionTcpEstablishedread-createcurrentLook for established TCP sessions in classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.96ColumnalaQoSConditionSourceIpv6Addrread-createcurrentSource IPv6 address to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.97ColumnalaQoSConditionSourceIpv6AddrStatusread-createcurrentStatus field indicating whether the source IPv6 address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.98ColumnalaQoSConditionSourceIpv6Maskread-createcurrentSource IPv6 mask to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.99ColumnalaQoSConditionDestinationIpv6Addrread-createcurrentDestination IPv6 address to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.100ColumnalaQoSConditionDestinationIpv6AddrStatusread-createcurrentStatus field indicating whether the destination IPv6 address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.101ColumnalaQoSConditionDestinationIpv6Maskread-createcurrentDestination IPv6 mask to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.102ColumnalaQoSConditionIpv6Trafficread-createcurrentclassify IPV6 traffic
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.103ColumnalaQoSConditionIpv6NHread-createcurrentNH value to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.104ColumnalaQoSConditionIpv6NHStatusread-createcurrentStatus field indicating whether the NH value needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.105ColumnalaQoSConditionIpv6FlowLabelread-createcurrentFL value to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.106ColumnalaQoSConditionIpv6FlowLabelStatusread-createcurrentStatus field indicating whether the flow label value needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.107ColumnalaQoSConditionMcastIpv6Addrread-createcurrentMulticast IPv6 address to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.108ColumnalaQoSConditionMcastIpv6AddrStatusread-createcurrentStatus field indicating whether the multicast IPv6 address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.109ColumnalaQoSConditionMcastIpv6Maskread-createcurrentMulticast IPv6 mask to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.110ColumnalaQoSConditionDscpEndread-createcurrentDSCP value to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.111ColumnalaQoSConditionInnerSourceVlanread-createcurrentCustomer VLAN to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.112ColumnalaQoSConditionInnerSourceVlanStatusread-createcurrentStatus field indicating whether the inner VLAN needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.113ColumnalaQoSConditionInner8021pread-createcurrentCustomer 802.1p to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.114ColumnalaQoSConditionInner8021pStatusread-createcurrentStatus field indicating whether the inner 802.1p needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.115ColumnalaQoSConditionVrfNameread-createcurrentName of Vrf to match traffic in
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.116ColumnalaQoSConditionVrfNameStatusread-createcurrentStatus field indicating whether the traffic from a specific vrf needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.117ColumnalaQoSCondition8021pEndread-createcurrent802.1p range end value to use for traffic classification.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.118ColumnalaQoSConditionInner8021pEndread-createcurrentInner 802.1p range end value to use for traffic classification.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.119ColumnalaQoSConditionSourceVlanGroupread-createcurrentSource vlan group to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.120ColumnalaQoSConditionSourceVlanGroupStatusread-createcurrentStatus field indicating whether to use for traffic classification (enabled) or not (disabled) for source vlan group.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.121ColumnalaQoSConditionInnerSourceVlanGroupread-createcurrentInner Source vlan group to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.122ColumnalaQoSConditionInnerSourceVlanGroupStatusread-createcurrentStatus field indicating whether to use for traffic classification (enabled) or not (disabled) for inner source vlan group.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.123ColumnalaQoSConditionSIPread-createcurrentSIP type to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.3.1.124ColumnalaQoSConditionSIPStatusread-createcurrentSIP Status field indicates whether SIP is enabled or disabled for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4TablealaQoSAppliedConditionTablenot-accessiblecurrentTable of QoS AppliedCondition definitions
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1RowalaQoSAppliedConditionEntrynot-accessiblecurrentDefinition of QoS AppliedCondition
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.1ColumnalaQoSAppliedConditionNamenot-accessiblecurrentName of condition
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.2ColumnalaQoSAppliedConditionSourceread-onlycurrentWhat entity created the condition.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.3ColumnalaQoSAppliedConditionSourceSlotread-onlycurrentSource physical slot used for traffic classification When 0, the port identifies an aggregate
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.4ColumnalaQoSAppliedConditionSourceSlotStatusread-onlycurrentStatus field indicating whether the source physical slot and port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.5ColumnalaQoSAppliedConditionSourcePortread-onlycurrentSource physical port range start to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.6ColumnalaQoSAppliedConditionSourcePortGroupread-onlycurrentSource physical port group to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.7ColumnalaQoSAppliedConditionSourcePortGroupStatusread-onlycurrentStatus field indicating whether the source physical port group needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.8ColumnalaQoSAppliedConditionDestinationSlotread-onlycurrentDestination physical slot used for traffic classification When 0, the port identifies an aggregate
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.9ColumnalaQoSAppliedConditionDestinationSlotStatusread-onlycurrentStatus field indicating whether the destination physical slot and port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.10ColumnalaQoSAppliedConditionDestinationPortread-onlycurrentDestination physical port range start to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.11ColumnalaQoSAppliedConditionDestinationPortGroupread-onlycurrentDestination physical port group to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.12ColumnalaQoSAppliedConditionDestinationPortGroupStatusread-onlycurrentStatus field indicating whether the destination physical port group needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.13ColumnalaQoSAppliedConditionSourceInterfaceTyperead-onlycurrentSource physical interface type to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.14ColumnalaQoSAppliedConditionSourceInterfaceTypeStatusread-onlycurrentStatus field indicating whether the source physical interface type needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.15ColumnalaQoSAppliedConditionDestinationInterfaceTyperead-onlycurrentDestination physical interface type to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.16ColumnalaQoSAppliedConditionDestinationInterfaceTypeStatusread-onlycurrentStatus field indicating whether the destination physical interface type needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.17ColumnalaQoSAppliedConditionSourceMacAddrread-onlycurrentSource MAC address to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.18ColumnalaQoSAppliedConditionSourceMacAddrStatusread-onlycurrentStatus field indicating whether the source MAC address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.19ColumnalaQoSAppliedConditionSourceMacMaskread-onlycurrentSource MAC mask to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.20ColumnalaQoSAppliedConditionSourceMacGroupread-onlycurrentSource MAC group to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.21ColumnalaQoSAppliedConditionSourceMacGroupStatusread-onlycurrentStatus field indicating whether the source MAC group needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.22ColumnalaQoSAppliedConditionDestinationMacAddrread-onlycurrentDestination MAC address to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.23ColumnalaQoSAppliedConditionDestinationMacAddrStatusread-onlycurrentStatus field indicating whether the destination MAC address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.24ColumnalaQoSAppliedConditionDestinationMacMaskread-onlycurrentDestination MAC mask to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.25ColumnalaQoSAppliedConditionDestinationMacGroupread-onlycurrentDestination MAC group to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.26ColumnalaQoSAppliedConditionDestinationMacGroupStatusread-onlycurrentStatus field indicating whether the destination MAC group needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.27ColumnalaQoSAppliedConditionSourceVlanread-onlycurrentSource VLAN to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.28ColumnalaQoSAppliedConditionSourceVlanStatusread-onlycurrentStatus field indicating whether the source VLAN needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.29ColumnalaQoSAppliedConditionDestinationVlanread-onlycurrentDestination VLAN to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.30ColumnalaQoSAppliedConditionDestinationVlanStatusread-onlycurrentStatus field indicating whether the destination VLAN needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.31ColumnalaQoSAppliedCondition8021pread-onlycurrent802.1p value to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.32ColumnalaQoSAppliedCondition8021pStatusread-onlycurrentStatus field indicating whether the 802.1p value needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.33ColumnalaQoSAppliedConditionSourceIpAddrread-onlycurrentSource IP address to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.34ColumnalaQoSAppliedConditionSourceIpAddrStatusread-onlycurrentStatus field indicating whether the source IP address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.35ColumnalaQoSAppliedConditionSourceIpMaskread-onlycurrentSource IP mask to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.36ColumnalaQoSAppliedConditionSourceNetworkGroupread-onlycurrentSource network group to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.37ColumnalaQoSAppliedConditionSourceNetworkGroupStatusread-onlycurrentStatus field indicating whether the source network group needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.38ColumnalaQoSAppliedConditionDestinationIpAddrread-onlycurrentDestination IP address to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.39ColumnalaQoSAppliedConditionDestinationIpAddrStatusread-onlycurrentStatus field indicating whether the destination IP address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.40ColumnalaQoSAppliedConditionDestinationIpMaskread-onlycurrentDestination IP mask to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.41ColumnalaQoSAppliedConditionDestinationNetworkGroupread-onlycurrentDestination network group to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.42ColumnalaQoSAppliedConditionDestinationNetworkGroupStatusread-onlycurrentStatus field indicating whether the destination network group needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.43ColumnalaQoSAppliedConditionMulticastIpAddrread-onlycurrentMulticast IP address to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.44ColumnalaQoSAppliedConditionMulticastIpAddrStatusread-onlycurrentStatus field indicating whether the multicast IP address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.45ColumnalaQoSAppliedConditionMulticastIpMaskread-onlycurrentMulticast IP mask to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.46ColumnalaQoSAppliedConditionMulticastNetworkGroupread-onlycurrentMulticast network group to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.47ColumnalaQoSAppliedConditionMulticastNetworkGroupStatusread-onlycurrentStatus field indicating whether the multicast network group needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.48ColumnalaQoSAppliedConditionTosread-onlycurrentTOS value to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.49ColumnalaQoSAppliedConditionTosStatusread-onlycurrentStatus field indicating whether the TOS value & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.50ColumnalaQoSAppliedConditionTosMaskread-onlycurrentTOS mask to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.51ColumnalaQoSAppliedConditionDscpread-onlycurrentDSCP value to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.52ColumnalaQoSAppliedConditionDscpStatusread-onlycurrentStatus field indicating whether the DSCP value & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.53ColumnalaQoSAppliedConditionDscpMaskread-onlycurrentDSCP mask to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.54ColumnalaQoSAppliedConditionIpProtocolread-onlycurrentIP protocol to use for traffic classification.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.55ColumnalaQoSAppliedConditionIpProtocolStatusread-onlycurrentStatus field indicating whether the IP protocol needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.56ColumnalaQoSAppliedConditionSourceIpPortread-onlycurrentSource IP port range start to use for traffic classification.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.57ColumnalaQoSAppliedConditionSourceIpPortStatusread-onlycurrentStatus field indicating whether the source IP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.58ColumnalaQoSAppliedConditionDestinationIpPortread-onlycurrentDestination IP port range start to use for traffic classification.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.59ColumnalaQoSAppliedConditionDestinationIpPortStatusread-onlycurrentStatus field indicating whether the destination IP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.60ColumnalaQoSAppliedConditionServiceread-onlycurrentName of service to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.61ColumnalaQoSAppliedConditionServiceStatusread-onlycurrentStatus field indicating whether the service needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.62ColumnalaQoSAppliedConditionServiceGroupread-onlycurrentName of service group to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.63ColumnalaQoSAppliedConditionServiceGroupStatusread-onlycurrentStatus field indicating whether the service group needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.64ColumnalaQoSAppliedConditionIcmpTyperead-onlycurrentICMP type to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.65ColumnalaQoSAppliedConditionIcmpTypeStatusread-onlycurrentStatus field indicating whether the ICMP type needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.66ColumnalaQoSAppliedConditionIcmpCoderead-onlycurrentICMP code to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.67ColumnalaQoSAppliedConditionIcmpCodeStatusread-onlycurrentStatus field indicating whether the ICMP code needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.68ColumnalaQoSAppliedConditionDlciread-onlycurrentDLCI to use to traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.69ColumnalaQoSAppliedConditionDlciStatusread-onlycurrentStatus field indicating whether the DLCI needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.70ColumnalaQoSAppliedConditionRowStatusread-onlycurrentUsed to create/delete conditions according to the RowStatus convention
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.71ColumnalaQoSAppliedConditionSourcePortEndread-onlycurrentSource physical port range end to use for traffic classification. Must be greater than port range start to indicate a range. When '1', use source port as a sin…
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.72ColumnalaQoSAppliedConditionDestinationPortEndread-onlycurrentDestination physical port range end to use for traffic classification. Must be greater than port range start to indicate a range. When '1', use destination por…
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.73ColumnalaQoSAppliedConditionSourceIpPortEndread-onlycurrentSource IP port range end to use for traffic classification. Must be greater than source IP port range start to indicate a range. When '0', use source IP port a…
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.74ColumnalaQoSAppliedConditionDestinationIpPortEndread-onlycurrentDestination IP port range end to use for traffic classification. Must be greater than destination IP port range start to indicate a range. When '0', use destin…
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.75ColumnalaQoSAppliedConditionSourceTcpPortread-onlycurrentSource TCP port range start to use for traffic classification.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.76ColumnalaQoSAppliedConditionSourceTcpPortStatusread-onlycurrentStatus field indicating whether the source TCP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.77ColumnalaQoSAppliedConditionSourceTcpPortEndread-onlycurrentSource TCP port range end to use for traffic classification. Must be greater than source TCP port range start to indicate a range. When '0', use source TCP por…
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.78ColumnalaQoSAppliedConditionDestinationTcpPortread-onlycurrentDestination TCP port range start to use for traffic classification.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.79ColumnalaQoSAppliedConditionDestinationTcpPortStatusread-onlycurrentStatus field indicating whether the destination TCP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.80ColumnalaQoSAppliedConditionDestinationTcpPortEndread-onlycurrentDestination TCP port range end to use for traffic classification. Must be greater than destination TCP port range start to indicate a range. When '0', use dest…
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.81ColumnalaQoSAppliedConditionSourceUdpPortread-onlycurrentSource UDP port range start to use for traffic classification.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.82ColumnalaQoSAppliedConditionSourceUdpPortStatusread-onlycurrentStatus field indicating whether the source UDP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.83ColumnalaQoSAppliedConditionSourceUdpPortEndread-onlycurrentSource UDP port range end to use for traffic classification. Must be greater than source UDP port range start to indicate a range. When '0', use source UDP por…
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.84ColumnalaQoSAppliedConditionDestinationUdpPortread-onlycurrentDestination UDP port range start to use for traffic classification.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.85ColumnalaQoSAppliedConditionDestinationUdpPortStatusread-onlycurrentStatus field indicating whether the destination UDP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.86ColumnalaQoSAppliedConditionDestinationUdpPortEndread-onlycurrentDestination UDP port range end to use for traffic classification. Must be greater than destination UDP port range start to indicate a range. When '0', use dest…
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.87ColumnalaQoSAppliedConditionEthertyperead-onlycurrentEthertype value to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.88ColumnalaQoSAppliedConditionEthertypeStatusread-onlycurrentStatus field indicating whether the ethertype value needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.89ColumnalaQoSAppliedConditionTcpFlagsread-onlycurrentUse any/all specifieid TCP flags for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.90ColumnalaQoSAppliedConditionTcpFlagsStatusread-onlycurrentStatus field indicating whether the TCP flag bits needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.91ColumnalaQoSAppliedConditionTcpFlagsValread-onlycurrentTCP flags values used for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.92ColumnalaQoSAppliedConditionTcpFlagsValStatusread-onlycurrentNot used
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.93ColumnalaQoSAppliedConditionTcpFlagsMaskread-onlycurrentMask of TCP flags bits used for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.94ColumnalaQoSAppliedConditionTcpFlagsMaskStatusread-onlycurrentNot used
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.95ColumnalaQoSAppliedConditionTcpEstablishedread-onlycurrentLook for established TCP sessions in classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.96ColumnalaQoSAppliedConditionSourceIpv6Addrread-onlycurrentSource IPv6 address to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.97ColumnalaQoSAppliedConditionSourceIpv6AddrStatusread-onlycurrentStatus field indicating whether the source IPv6 address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.98ColumnalaQoSAppliedConditionSourceIpv6Maskread-onlycurrentSource IPv6 mask to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.99ColumnalaQoSAppliedConditionDestinationIpv6Addrread-onlycurrentDestination IPv6 address to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.100ColumnalaQoSAppliedConditionDestinationIpv6AddrStatusread-onlycurrentStatus field indicating whether the destination IPv6 address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.101ColumnalaQoSAppliedConditionDestinationIpv6Maskread-onlycurrentDestination IPv6 mask to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.102ColumnalaQoSAppliedConditionIpv6Trafficread-onlycurrentclassify IPV6 traffic
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.103ColumnalaQoSAppliedConditionIpv6NHread-onlycurrentNH value to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.104ColumnalaQoSAppliedConditionIpv6NHStatusread-onlycurrentStatus field indicating whether the NH value needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.105ColumnalaQoSAppliedConditionIpv6FlowLabelread-onlycurrentFL value to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.106ColumnalaQoSAppliedConditionIpv6FlowLabelStatusread-onlycurrentStatus field indicating whether the flow label value needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.107ColumnalaQoSAppliedConditionMcastIpv6Addrread-createcurrentMulticast IPv6 address to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.108ColumnalaQoSAppliedConditionMcastIpv6AddrStatusread-createcurrentStatus field indicating whether the multicast IPv6 address & mask needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.109ColumnalaQoSAppliedConditionMcastIpv6Maskread-createcurrentMulticast IPv6 mask to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.110ColumnalaQoSAppliedConditionDscpEndread-onlycurrentDSCP value to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.111ColumnalaQoSAppliedConditionInnerSourceVlanread-onlycurrentCustomer VLAN to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.112ColumnalaQoSAppliedConditionInnerSourceVlanStatusread-onlycurrentStatus field indicating whether the inner VLAN needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.113ColumnalaQoSAppliedConditionInner8021pread-onlycurrentCustomer 802.1p to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.114ColumnalaQoSAppliedConditionInner8021pStatusread-onlycurrentStatus field indicating whether the inner 802.1p needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.115ColumnalaQoSAppliedConditionVrfNameread-createcurrentName of Vrf to match traffic in
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.116ColumnalaQoSAppliedConditionVrfNameStatusread-createcurrentStatus field indicating whether the traffic from a specific vrf needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.117ColumnalaQoSAppliedCondition8021pEndread-createcurrent802.1p range end value to use for traffic classification.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.118ColumnalaQoSAppliedConditionInner8021pEndread-createcurrentInner 802.1p range end value to use for traffic classification.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.119ColumnalaQoSAppliedConditionSourceVlanGroupread-createcurrentSource vlan group to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.120ColumnalaQoSAppliedConditionSourceVlanGroupStatusread-createcurrentStatus field indicating whether to use for traffic classification (enabled) or not (disabled) for source vlan group.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.121ColumnalaQoSAppliedConditionInnerSourceVlanGroupread-createcurrentInner Source vlan group to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.122ColumnalaQoSAppliedConditionInnerSourceVlanGroupStatusread-createcurrentStatus field indicating whether to use for traffic classification (enabled) or not (disabled) for inner source vlan group.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.123ColumnalaQoSAppliedConditionSIPread-createcurrentSIP type to use for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.4.1.124ColumnalaQoSAppliedConditionSIPStatusread-createcurrentSIP Status field indicates whether SIP is enabled or disabled for traffic classification
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5TablealaQoSServiceTablenot-accessiblecurrentTable of QoS Service definitions
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1RowalaQoSServiceEntrynot-accessiblecurrentDefinition of QoS Service
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.1ColumnalaQoSServiceNamenot-accessiblecurrentName of the service
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.2ColumnalaQoSServiceSourceread-createcurrentWhat entity created the service.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.3ColumnalaQoSServiceProtocolread-createcurrentprotocol field for Service
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.4ColumnalaQoSServiceSourceIpPortread-createcurrentSource IP port range start to use for traffic classification.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.5ColumnalaQoSServiceSourceIpPortStatusread-createcurrentStatus field indicating whether the source IP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.6ColumnalaQoSServiceDestinationIpPortread-createcurrentDestination IP port range start to use for traffic classification.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.7ColumnalaQoSServiceDestinationIpPortStatusread-createcurrentStatus field indicating whether the destination IP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.8ColumnalaQoSServiceRowStatusread-createcurrentUsed to create/delete services according to the RowStatus convention
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.9ColumnalaQoSServiceSourceIpPortEndread-createcurrentSource IP port range end to use for traffic classification. Must be greater than source IP port range start to indicate a range. When '0', use source IP port a…
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.10ColumnalaQoSServiceDestinationIpPortEndread-createcurrentDestination IP port range end to use for traffic classification. Must be greater than destination IP port range start to indicate a range. When '0', use destin…
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.11ColumnalaQoSServiceSourceTcpPortread-createcurrentSource TCP port range start to use for traffic classification.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.12ColumnalaQoSServiceSourceTcpPortStatusread-createcurrentStatus field indicating whether the source TCP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.13ColumnalaQoSServiceSourceTcpPortEndread-createcurrentSource TCP port range end to use for traffic classification. Must be greater than source TCP port range start to indicate a range. When '0', use source TCP por…
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.14ColumnalaQoSServiceDestinationTcpPortread-createcurrentDestination TCP port range start to use for traffic classification.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.15ColumnalaQoSServiceDestinationTcpPortStatusread-createcurrentStatus field indicating whether the destination TCP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.16ColumnalaQoSServiceDestinationTcpPortEndread-createcurrentDestination TCP port range end to use for traffic classification. Must be greater than destination TCP port range start to indicate a range. When '0', use dest…
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.17ColumnalaQoSServiceSourceUdpPortread-createcurrentSource UDP port range start to use for traffic classification.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.18ColumnalaQoSServiceSourceUdpPortStatusread-createcurrentStatus field indicating whether the source UDP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.19ColumnalaQoSServiceSourceUdpPortEndread-createcurrentSource UDP port range end to use for traffic classification. Must be greater than source UDP port range start to indicate a range. When '0', use source UDP por…
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.20ColumnalaQoSServiceDestinationUdpPortread-createcurrentDestination UDP port range start to use for traffic classification.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.21ColumnalaQoSServiceDestinationUdpPortStatusread-createcurrentStatus field indicating whether the destination UDP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.5.1.22ColumnalaQoSServiceDestinationUdpPortEndread-createcurrentDestination UDP port range end to use for traffic classification. Must be greater than destination UDP port range start to indicate a range. When '0', use dest…
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6TablealaQoSAppliedServiceTablenot-accessiblecurrentTable of QoS AppliedService definitions
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1RowalaQoSAppliedServiceEntrynot-accessiblecurrentDefinition of QoS AppliedService
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.1ColumnalaQoSAppliedServiceNamenot-accessiblecurrentName of the service
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.2ColumnalaQoSAppliedServiceSourceread-onlycurrentWhat entity created the service.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.3ColumnalaQoSAppliedServiceProtocolread-onlycurrentprotocol field for AppliedService
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.4ColumnalaQoSAppliedServiceSourceIpPortread-onlycurrentSource IP port range start to use for traffic classification.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.5ColumnalaQoSAppliedServiceSourceIpPortStatusread-onlycurrentStatus field indicating whether the source IP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.6ColumnalaQoSAppliedServiceDestinationIpPortread-onlycurrentDestination IP port range start to use for traffic classification.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.7ColumnalaQoSAppliedServiceDestinationIpPortStatusread-onlycurrentStatus field indicating whether the destination IP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.8ColumnalaQoSAppliedServiceRowStatusread-onlycurrentUsed to create/delete services according to the RowStatus convention
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.9ColumnalaQoSAppliedServiceSourceIpPortEndread-onlycurrentSource IP port range end to use for traffic classification. Must be greater than source IP port range start to indicate a range. When '0', use source IP port a…
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.10ColumnalaQoSAppliedServiceDestinationIpPortEndread-onlycurrentDestination IP port range end to use for traffic classification. Must be greater than destination IP port range start to indicate a range. When '0', use destin…
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.11ColumnalaQoSAppliedServiceSourceTcpPortread-onlycurrentSource TCP port range start to use for traffic classification.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.12ColumnalaQoSAppliedServiceSourceTcpPortStatusread-onlycurrentStatus field indicating whether the source TCP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.13ColumnalaQoSAppliedServiceSourceTcpPortEndread-onlycurrentSource TCP port range end to use for traffic classification. Must be greater than source TCP port range start to indicate a range. When '0', use source TCP por…
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.14ColumnalaQoSAppliedServiceDestinationTcpPortread-onlycurrentDestination TCP port range start to use for traffic classification.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.15ColumnalaQoSAppliedServiceDestinationTcpPortStatusread-onlycurrentStatus field indicating whether the destination TCP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.16ColumnalaQoSAppliedServiceDestinationTcpPortEndread-onlycurrentDestination TCP port range end to use for traffic classification. Must be greater than destination TCP port range start to indicate a range. When '0', use dest…
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.17ColumnalaQoSAppliedServiceSourceUdpPortread-onlycurrentSource UDP port range start to use for traffic classification.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.18ColumnalaQoSAppliedServiceSourceUdpPortStatusread-onlycurrentStatus field indicating whether the source UDP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.19ColumnalaQoSAppliedServiceSourceUdpPortEndread-onlycurrentSource UDP port range end to use for traffic classification. Must be greater than source UDP port range start to indicate a range. When '0', use source UDP por…
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.20ColumnalaQoSAppliedServiceDestinationUdpPortread-onlycurrentDestination UDP port range start to use for traffic classification.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.21ColumnalaQoSAppliedServiceDestinationUdpPortStatusread-onlycurrentStatus field indicating whether the destination UDP port range needs to be matched(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.6.1.22ColumnalaQoSAppliedServiceDestinationUdpPortEndread-onlycurrentDestination UDP port range end to use for traffic classification. Must be greater than destination UDP port range start to indicate a range. When '0', use dest…
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.7TablealaQoSServiceGroupsTablenot-accessiblecurrentTable of QoS ServiceGroups definitions
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.7.1RowalaQoSServiceGroupsEntrynot-accessiblecurrentDefinition of QoS ServiceGroups
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.7.1.1ColumnalaQoSServiceGroupsNamenot-accessiblecurrentName of service group
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.7.1.2ColumnalaQoSServiceGroupsSourceread-createcurrentWhat entity created the service group.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.7.1.3ColumnalaQoSServiceGroupsStatusread-createcurrentUsed to create/delete service groups according to the RowStatus convention
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.8TablealaQoSAppliedServiceGroupsTablenot-accessiblecurrentTable of QoS AppliedServiceGroups definitions
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.8.1RowalaQoSAppliedServiceGroupsEntrynot-accessiblecurrentDefinition of QoS AppliedServiceGroups
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.8.1.1ColumnalaQoSAppliedServiceGroupsNamenot-accessiblecurrentName of service group
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.8.1.2ColumnalaQoSAppliedServiceGroupsSourceread-onlycurrentWhat entity created the service group.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.8.1.3ColumnalaQoSAppliedServiceGroupsStatusread-onlycurrentUsed to create/delete service groups according to the RowStatus convention
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.9TablealaQoSServiceGroupTablenot-accessiblecurrentTable of QoS ServiceGroup definitions
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.9.1RowalaQoSServiceGroupEntrynot-accessiblecurrentDefinition of QoS ServiceGroup
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.9.1.1ColumnalaQoSServiceGroupServiceNamenot-accessiblecurrentName of service in service group entry
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.9.1.2ColumnalaQoSServiceGroupStatusread-createcurrentUsed to create/delete service group entries according to the RowStatus convention
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.10TablealaQoSAppliedServiceGroupTablenot-accessiblecurrentTable of QoS AppliedServiceGroup definitions
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.10.1RowalaQoSAppliedServiceGroupEntrynot-accessiblecurrentDefinition of QoS AppliedServiceGroup
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.10.1.1ColumnalaQoSAppliedServiceGroupServiceNamenot-accessiblecurrentName of service in service group entry
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.10.1.2ColumnalaQoSAppliedServiceGroupStatusread-onlycurrentUsed to create/delete service group entries according to the RowStatus convention
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.11TablealaQoSNetworkGroupsTablenot-accessiblecurrentTable of QoS NetworkGroups definitions
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.11.1RowalaQoSNetworkGroupsEntrynot-accessiblecurrentDefinition of QoS NetworkGroups
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.11.1.1ColumnalaQoSNetworkGroupsNamenot-accessiblecurrentName of network group
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.11.1.2ColumnalaQoSNetworkGroupsSourceread-createcurrentWhat entity created the network group.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.11.1.3ColumnalaQoSNetworkGroupsStatusread-createcurrentUsed to create/delete network groups according to the RowStatus convention
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.12TablealaQoSAppliedNetworkGroupsTablenot-accessiblecurrentTable of QoS AppliedNetworkGroups definitions
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.12.1RowalaQoSAppliedNetworkGroupsEntrynot-accessiblecurrentDefinition of QoS AppliedNetworkGroups
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.12.1.1ColumnalaQoSAppliedNetworkGroupsNamenot-accessiblecurrentName of network group
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.12.1.2ColumnalaQoSAppliedNetworkGroupsSourceread-onlycurrentWhat entity created the network group.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.12.1.3ColumnalaQoSAppliedNetworkGroupsStatusread-onlycurrentUsed to create/delete network groups according to the RowStatus convention
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.13TablealaQoSNetworkGroupTablenot-accessiblecurrentTable of QoS NetworkGroup definitions
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.13.1RowalaQoSNetworkGroupEntrynot-accessiblecurrentDefinition of QoS NetworkGroup
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.13.1.1ColumnalaQoSNetworkGroupIpAddrnot-accessiblecurrentIP address for network group entry.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.13.1.2ColumnalaQoSNetworkGroupIpMasknot-accessiblecurrentIP mask for network group entry.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.13.1.3ColumnalaQoSNetworkGroupStatusread-createcurrentUsed to create/delete network group entries according to the RowStatus convention
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.14TablealaQoSAppliedNetworkGroupTablenot-accessiblecurrentTable of QoS AppliedNetworkGroup definitions
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.14.1RowalaQoSAppliedNetworkGroupEntrynot-accessiblecurrentDefinition of QoS AppliedNetworkGroup
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.14.1.1ColumnalaQoSAppliedNetworkGroupIpAddrnot-accessiblecurrentIP address for network group entry.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.14.1.2ColumnalaQoSAppliedNetworkGroupIpMasknot-accessiblecurrentIP mask for network group entry.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.14.1.3ColumnalaQoSAppliedNetworkGroupStatusread-onlycurrentUsed to create/delete network group entries according to the RowStatus convention
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.15TablealaQoSMACGroupsTablenot-accessiblecurrentTable of QoS MACGroups definitions
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.15.1RowalaQoSMACGroupsEntrynot-accessiblecurrentDefinition of QoS MACGroups
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.15.1.1ColumnalaQoSMACGroupsNamenot-accessiblecurrentName of MAC group
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.15.1.2ColumnalaQoSMACGroupsSourceread-createcurrentWhat entity created the MAC group.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.15.1.3ColumnalaQoSMACGroupsStatusread-createcurrentUsed to create/delete MAC groups according to the RowStatus convention
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.16TablealaQoSAppliedMACGroupsTablenot-accessiblecurrentTable of QoS AppliedMACGroups definitions
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.16.1RowalaQoSAppliedMACGroupsEntrynot-accessiblecurrentDefinition of QoS AppliedMACGroups
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.16.1.1ColumnalaQoSAppliedMACGroupsNamenot-accessiblecurrentName of MAC group
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.16.1.2ColumnalaQoSAppliedMACGroupsSourceread-onlycurrentWhat entity created the MAC group.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.16.1.3ColumnalaQoSAppliedMACGroupsStatusread-onlycurrentUsed to create/delete MAC groups according to the RowStatus convention
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.17TablealaQoSMACGroupTablenot-accessiblecurrentTable of QoS MACGroup definitions
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.17.1RowalaQoSMACGroupEntrynot-accessiblecurrentDefinition of QoS MACGroup
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.17.1.1ColumnalaQoSMACGroupMacAddrnot-accessiblecurrentMAC address for MAC group entry
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.17.1.2ColumnalaQoSMACGroupMacMasknot-accessiblecurrentMAC mask for MAC group entry
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.17.1.3ColumnalaQoSMACGroupStatusread-createcurrentUsed to create/delete MAC group entries according to the RowStatus convention
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.18TablealaQoSAppliedMACGroupTablenot-accessiblecurrentTable of QoS AppliedMACGroup definitions
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.18.1RowalaQoSAppliedMACGroupEntrynot-accessiblecurrentDefinition of QoS AppliedMACGroup
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.18.1.1ColumnalaQoSAppliedMACGroupMacAddrnot-accessiblecurrentMAC address for MAC group entry
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.18.1.2ColumnalaQoSAppliedMACGroupMacMasknot-accessiblecurrentMAC mask for MAC group entry
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.18.1.3ColumnalaQoSAppliedMACGroupStatusread-onlycurrentUsed to create/delete MAC group entries according to the RowStatus convention
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.19TablealaQoSPortGroupsTablenot-accessiblecurrentTable of QoS PortGroups definitions
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.19.1RowalaQoSPortGroupsEntrynot-accessiblecurrentDefinition of QoS PortGroups
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.19.1.1ColumnalaQoSPortGroupsNamenot-accessiblecurrentName of port group
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.19.1.2ColumnalaQoSPortGroupsSourceread-createcurrentWhat entity created the port group.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.19.1.3ColumnalaQoSPortGroupsStatusread-createcurrentUsed to create/delete port groups according to the RowStatus convention
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.19.1.4ColumnalaQoSPortGroupsModeread-createcurrentMode for policy action on the per port basis or group basis.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.20TablealaQoSAppliedPortGroupsTablenot-accessiblecurrentTable of QoS AppliedPortGroups definitions
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.20.1RowalaQoSAppliedPortGroupsEntrynot-accessiblecurrentDefinition of QoS AppliedPortGroups
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.20.1.1ColumnalaQoSAppliedPortGroupsNamenot-accessiblecurrentName of port group
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.20.1.2ColumnalaQoSAppliedPortGroupsSourceread-onlycurrentWhat entity created the port group.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.20.1.3ColumnalaQoSAppliedPortGroupsStatusread-onlycurrentUsed to create/delete port groups according to the RowStatus convention
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.20.1.4ColumnalaQoSAppliedPortGroupsModeread-createcurrentMode for policy action on the per port basis or group basis.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.21TablealaQoSPortGroupTablenot-accessiblecurrentTable of QoS PortGroup definitions
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.21.1RowalaQoSPortGroupEntrynot-accessiblecurrentDefinition of QoS PortGroup
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.21.1.1ColumnalaQoSPortGroupSlotnot-accessiblecurrentPhysical slot for port group entry
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.21.1.2ColumnalaQoSPortGroupPortnot-accessiblecurrentPhysical port range start for port group entry
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.21.1.3ColumnalaQoSPortGroupStatusread-createcurrentUsed to create/delete port group entries according to the RowStatus convention
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.21.1.4ColumnalaQoSPortGroupPortEndnot-accessiblecurrentPhysical port range end for port group entry Must be greater than port range start to indicate a range. When '1', use port as a single port.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.22TablealaQoSAppliedPortGroupTablenot-accessiblecurrentTable of QoS AppliedPortGroup definitions
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.22.1RowalaQoSAppliedPortGroupEntrynot-accessiblecurrentDefinition of QoS AppliedPortGroup
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.22.1.1ColumnalaQoSAppliedPortGroupSlotnot-accessiblecurrentPhysical slot for port group entry
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.22.1.2ColumnalaQoSAppliedPortGroupPortnot-accessiblecurrentPhysical port range start for port group entry
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.22.1.3ColumnalaQoSAppliedPortGroupStatusread-onlycurrentUsed to create/delete port group entries according to the RowStatus convention
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.22.1.4ColumnalaQoSAppliedPortGroupPortEndnot-accessiblecurrentPhysical port range end for port group entry Must be greater than port range start to indicate a range. When '1', use port as a single port.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.23TablealaQoSMapGroupsTablenot-accessiblecurrentTable of QoS MapGroups definitions
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.23.1RowalaQoSMapGroupsEntrynot-accessiblecurrentDefinition of QoS MapGroups
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.23.1.1ColumnalaQoSMapGroupsNamenot-accessiblecurrentName of map group
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.23.1.2ColumnalaQoSMapGroupsSourceread-createcurrentWhat entity created the map group.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.23.1.3ColumnalaQoSMapGroupsStatusread-createcurrentUsed to create/delete map groups according to the RowStatus convention
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.24TablealaQoSAppliedMapGroupsTablenot-accessiblecurrentTable of QoS AppliedMapGroups definitions
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.24.1RowalaQoSAppliedMapGroupsEntrynot-accessiblecurrentDefinition of QoS AppliedMapGroups
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.24.1.1ColumnalaQoSAppliedMapGroupsNamenot-accessiblecurrentName of map group
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.24.1.2ColumnalaQoSAppliedMapGroupsSourceread-onlycurrentWhat entity created the map group.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.24.1.3ColumnalaQoSAppliedMapGroupsStatusread-onlycurrentUsed to create/delete map groups according to the RowStatus convention
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.25TablealaQoSMapGroupTablenot-accessiblecurrentTable of QoS MapGroup definitions
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.25.1RowalaQoSMapGroupEntrynot-accessiblecurrentDefinition of QoS MapGroup
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.25.1.1ColumnalaQoSMapGroupKeynot-accessiblecurrentKey range start of map group entry.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.25.1.2ColumnalaQoSMapGroupKeyEndnot-accessiblecurrentKey range end for map group entries. Key range end must be greater than key range start to indicate a range. When '0', use key range start as a single key.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.25.1.3ColumnalaQoSMapGroupValuenot-accessiblecurrentValue for map group entries. Value to stamp on traffic when keys in the proper range are seen.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.25.1.4ColumnalaQoSMapGroupStatusread-createcurrentUsed to create/delete map group entries according to the RowStatus convention
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.26TablealaQoSAppliedMapGroupTablenot-accessiblecurrentTable of QoS AppliedMapGroup definitions
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.26.1RowalaQoSAppliedMapGroupEntrynot-accessiblecurrentDefinition of QoS AppliedMapGroup
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.26.1.1ColumnalaQoSAppliedMapGroupKeynot-accessiblecurrentKey range start of map group entry.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.26.1.2ColumnalaQoSAppliedMapGroupKeyEndnot-accessiblecurrentKey range end for map group entries. Key range end must be greater than key range start to indicate a range. When '0', use key range start as a single key.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.26.1.3ColumnalaQoSAppliedMapGroupValuenot-accessiblecurrentValue for map group entries. Value to stamp on traffic when keys in the proper range are seen.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.26.1.4ColumnalaQoSAppliedMapGroupStatusread-onlycurrentUsed to create/delete map group entries according to the RowStatus convention
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27TablealaQoSActionTablenot-accessiblecurrentTable of QoS Action definitions
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1RowalaQoSActionEntrynot-accessiblecurrentDefinition of QoS Action
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.1ColumnalaQoSActionNamenot-accessiblecurrentName of action
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.2ColumnalaQoSActionSourceread-createcurrentWhat entity created the action.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.3ColumnalaQoSActionDispositionread-createcurrentDisposition of traffic using the action. Use to filter out unwanted traffic.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.4ColumnalaQoSActionDropAlgorithmread-createcurrentWhich drop algorithm should be used to discard traffic when oversubscribed.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.5ColumnalaQoSActionWredMaximumThresholdread-createcurrentBandwidth at which WRED should discard most traffic.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.6ColumnalaQoSActionWredMaximumThresholdStatusread-createcurrentStatus field indicating whether WRED maximum threshold is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.7ColumnalaQoSActionWredMinimumThresholdread-createcurrentBandwidth at which WRED should start to discard traffic.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.8ColumnalaQoSActionWredMinimumThresholdStatusread-createcurrentStatus field indicating whether WRED minimum threshold is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.9ColumnalaQoSActionWredMaximumProbabilityread-createcurrentProbabilty that traffic will be dropped at WRED maximum threshold.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.10ColumnalaQoSActionWredMaximumProbabilityStatusread-createcurrentStatus field indicating whether WRED maximum probability is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.11ColumnalaQoSActionMinimumBandwidthread-createcurrentMinimum bandwidth (Kbits/sec) to guarantee for traffic
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.12ColumnalaQoSActionMinimumBandwidthStatusread-createcurrentStatus field indicating whether minimum bandwidth is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.13ColumnalaQoSActionMaximumBandwidthread-createcurrentMaximum bandwidth (Kbits/sec) allowed for traffic
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.14ColumnalaQoSActionMaximumBandwidthStatusread-createcurrentStatus field indicating whether maximum bandwidth is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.15ColumnalaQoSActionPeakBandwidthread-createcurrentPeak bandwidth (Kbits/sec) allowed for traffic
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.16ColumnalaQoSActionPeakBandwidthStatusread-createcurrentStatus field indicating whether peak bandwidth is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.17ColumnalaQoSActionPriorityread-createcurrentInternal and queueing priority to use for traffic.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.18ColumnalaQoSActionPriorityStatusread-createcurrentStatus field indicating whether priority is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.19ColumnalaQoSActionSharedread-createcurrentWhen enabled, try and share any resources (queues/limiters/descriptors) when more than one policy uses the same action.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.20ColumnalaQoSActionJitterread-createcurrentMaximum jitter to allow for traffic.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.21ColumnalaQoSActionJitterStatusread-createcurrentStatus field indicating whether jitter is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.22ColumnalaQoSActionLatencyread-createcurrentMaximum latency to allow for traffic.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.23ColumnalaQoSActionLatencyStatusread-createcurrentStatus field indicating whether latency is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.24ColumnalaQoSActionMaximumDepthread-createcurrentMaximum depth (Kbytes) of queues for traffic. Used for EBS in tri-color marker applications.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.25ColumnalaQoSActionMaximumDepthStatusread-createcurrentStatus field indicating whether maximum depth is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.26ColumnalaQoSActionMaximumBuffersread-createcurrentMaxmimum buffers for queues for traffic.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.27ColumnalaQoSActionMaximumBuffersStatusread-createcurrentStatus field indicating whether maximum buffers is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.28ColumnalaQoSAction8021pread-createcurrent802.1p value to stamp on traffic.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.29ColumnalaQoSAction8021pStatusread-createcurrentStatus field indicating whether 802.1p is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.30ColumnalaQoSActionTosread-createcurrentTOS value to stamp on traffic. (High 3 bits of TOS byte)
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.31ColumnalaQoSActionTosStatusread-createcurrentStatus field indicating whether TOS is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.32ColumnalaQoSActionDscpread-createcurrentTOS value to stamp on traffic. (High 6 bits of TOS byte)
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.33ColumnalaQoSActionDscpStatusread-createcurrentStatus field indicating whether DSCP is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.34ColumnalaQoSActionMapFromread-createcurrentWhat field to use as key for mapping 802.1p/TOS/DSCP priorities
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.35ColumnalaQoSActionMapToread-createcurrentWhat field to rewrite due to remapping 802.1p/TOS/DSCP priorities
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.36ColumnalaQoSActionMapGroupread-createcurrentName of the map group to use when remapping 802.1p/TOS/DSCP priorities.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.37ColumnalaQoSActionMapGroupStatusread-createcurrentStatus field indicating whether a map group is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.38ColumnalaQoSActionSourceRewriteIpAddrread-createcurrentSource IP address to rewrite on traffic.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.39ColumnalaQoSActionSourceRewriteIpAddrStatusread-createcurrentStatus field indicating whether source rewrite IP address & mask is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.40ColumnalaQoSActionSourceRewriteIpMaskread-createcurrentSource rewrite IP mask to determine how much of source IP to rewrite.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.41ColumnalaQoSActionSourceRewriteNetworkGroupread-createcurrentName of network group containing source address/masks to rewrite on traffic. Must be a one to on correspondence with source network group entries in the condit…
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.42ColumnalaQoSActionSourceRewriteNetworkGroupStatusread-createcurrentStatus field indicating whether source rewrite network group is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.43ColumnalaQoSActionDestinationRewriteIpAddrread-createcurrentDestination IP address to rewrite on traffic.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.44ColumnalaQoSActionDestinationRewriteIpAddrStatusread-createcurrentStatus field indicating whether destination rewrite IP address & mask is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.45ColumnalaQoSActionDestinationRewriteIpMaskread-createcurrentDestination rewrite IP mask to determine how much of destination IP to rewrite.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.46ColumnalaQoSActionDestinationRewriteNetworkGroupread-createcurrentName of network group containing destination address/masks to rewrite on traffic. Must be a one to on correspondence with destination network group entries in …
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.47ColumnalaQoSActionDestinationRewriteNetworkGroupStatusread-createcurrentStatus field indicating whether destination rewrite network group is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.48ColumnalaQoSActionLoadBalanceGroupread-createcurrentName of load balance group to use for traffic
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.49ColumnalaQoSActionLoadBalanceGroupStatusread-createcurrentStatus field indicating whether load balanace group is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.50ColumnalaQoSActionPermanentGatewayIpAddrread-createcurrentNext hop gateway to use for traffic
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.51ColumnalaQoSActionPermanentGatewayIpAddrStatusread-createcurrentStatus field indicating whether permanent gateway IP address is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.52ColumnalaQoSActionAlternateGatewayIpAddrread-createcurrentNext hop gateway to use for traffic that doesn't have an explicit route. Use this gateway instead of default routes.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.53ColumnalaQoSActionAlternateGatewayIpAddrStatusread-createcurrentStatus field indicating whether alternate gateway IP address is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.54ColumnalaQoSActionRowStatusread-createcurrentUsed to create/delete actions according to the RowStatus convention
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.55ColumnalaQoSActionMinimumDepthread-createcurrentMinimum depth (Kbytes) of queues for traffic. Used for CBS in tri-color marker applications.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.56ColumnalaQoSActionMinimumDepthStatusread-createcurrentStatus field indicating whether minimum depth is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.57ColumnalaQoSActionVPNAccessread-createcurrentHow to encrypt traffic
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.58ColumnalaQoSActionNocacheread-createcurrentWhen enabled, don't make hardware entries for matching flows.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.59ColumnalaQoSActionPortdisableread-createcurrentWhen enabled, disable the physical source port of the traffic.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.60ColumnalaQoSActionRedirectSlotread-createcurrentDestination physical slot for redirected traffic
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.61ColumnalaQoSActionRedirectSlotStatusread-createcurrentStatus for alaQoSActionRedirectSlotStatus field
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.62ColumnalaQoSActionRedirectPortread-createcurrentDestination physical port for redirected traffic
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.63ColumnalaQoSActionRedirectAggread-createcurrentDestination linkagg for redirected traffic
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.64ColumnalaQoSActionRedirectAggStatusread-createcurrentStatus for alaQoSActionRedirectAggStatus field
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.65ColumnalaQoSActionMirrorSlotread-createcurrentDestination physical slot for mirrored traffic
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.66ColumnalaQoSActionMirrorPortread-createcurrentDestination physical port for mirrored traffic
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.67ColumnalaQoSActionMirrorModeread-createcurrentMirroring mode
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.68ColumnalaQoSActionMirrorModeStatusread-createcurrentStatus for alaQoSActionMirrorMode field
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.69ColumnalaQoSActionCIRread-createcurrentCommitted Information Rate - bandwidth values in kilobits per second.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.70ColumnalaQoSActionCIRStatusread-createcurrentStatus field indicating whether CIR value is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.71ColumnalaQoSActionCBSread-createcurrentCommitted Burst Size - bucket size in byte.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.72ColumnalaQoSActionCBSStatusread-createcurrentStatus field indicating whether CBS value is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.73ColumnalaQoSActionPIRread-createcurrentPeak Information Rate - bandwidth values in kilobits per second.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.74ColumnalaQoSActionPIRStatusread-createcurrentStatus field indicating whether PIR value is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.75ColumnalaQoSActionPBSread-createcurrentPeak Burst Size - bucket size in byte.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.76ColumnalaQoSActionPBSStatusread-createcurrentStatus field indicating whether PBS value is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.77ColumnalaQoSActionCounterColorread-createcurrentSpecifies the color mode for the counters which will be used for sr/trTCM.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.78ColumnalaQoSActionRTCPMonitorread-createcurrentRTCP Monitor status for the traffic.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.79ColumnalaQoSActionRTCPMonitorStatusread-createcurrentStatus of the RTCP Monitor field for the traffic.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.80ColumnalaQoSActionRTCPDSCPread-createcurrentRTCP DSCP number for the traffic.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.81ColumnalaQoSActionRTCPDSCPStatusread-createcurrentStatus of the RTCP DSCP field for the traffic.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.82ColumnalaQoSActionTrustDSCPread-createcurrentTrust DSCP status for the traffic.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.27.1.83ColumnalaQoSActionTrustDSCPStatusread-createcurrentStatus of the Trust DSCP field for the traffic.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28TablealaQoSAppliedActionTablenot-accessiblecurrentTable of QoS AppliedAction definitions
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1RowalaQoSAppliedActionEntrynot-accessiblecurrentDefinition of QoS AppliedAction
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.1ColumnalaQoSAppliedActionNamenot-accessiblecurrentName of action
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.2ColumnalaQoSAppliedActionSourceread-onlycurrentWhat entity created the action.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.3ColumnalaQoSAppliedActionDispositionread-onlycurrentDisposition of traffic using the action. Use to filter out unwanted traffic.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.4ColumnalaQoSAppliedActionDropAlgorithmread-onlycurrentWhich drop algorithm should be used to discard traffic when oversubscribed.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.5ColumnalaQoSAppliedActionWredMaximumThresholdread-onlycurrentBandwidth at which WRED should discard most traffic.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.6ColumnalaQoSAppliedActionWredMaximumThresholdStatusread-onlycurrentStatus field indicating whether WRED maximum threshold is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.7ColumnalaQoSAppliedActionWredMinimumThresholdread-onlycurrentBandwidth at which WRED should start to discard traffic.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.8ColumnalaQoSAppliedActionWredMinimumThresholdStatusread-onlycurrentStatus field indicating whether WRED minimum threshold is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.9ColumnalaQoSAppliedActionWredMaximumProbabilityread-onlycurrentProbabilty that traffic will be dropped at WRED maximum threshold.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.10ColumnalaQoSAppliedActionWredMaximumProbabilityStatusread-onlycurrentStatus field indicating whether WRED maximum probability is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.11ColumnalaQoSAppliedActionMinimumBandwidthread-onlycurrentMinimum bandwidth (Kbits/sec) to guarantee for traffic
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.12ColumnalaQoSAppliedActionMinimumBandwidthStatusread-onlycurrentStatus field indicating whether minimum bandwidth is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.13ColumnalaQoSAppliedActionMaximumBandwidthread-onlycurrentMaximum bandwidth (Kbits/sec) allowed for traffic
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.14ColumnalaQoSAppliedActionMaximumBandwidthStatusread-onlycurrentStatus field indicating whether maximum bandwidth is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.15ColumnalaQoSAppliedActionPeakBandwidthread-onlycurrentPeak bandwidth (Kbits/sec) allowed for traffic
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.16ColumnalaQoSAppliedActionPeakBandwidthStatusread-onlycurrentStatus field indicating whether peak bandwidth is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.17ColumnalaQoSAppliedActionPriorityread-onlycurrentInternal and queueing priority to use for traffic.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.18ColumnalaQoSAppliedActionPriorityStatusread-onlycurrentStatus field indicating whether priority is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.19ColumnalaQoSAppliedActionSharedread-onlycurrentWhen enabled, try and share any resources (queues/limiters/descriptors) when more than one policy uses the same action.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.20ColumnalaQoSAppliedActionJitterread-onlycurrentMaximum jitter to allow for traffic.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.21ColumnalaQoSAppliedActionJitterStatusread-onlycurrentStatus field indicating whether jitter is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.22ColumnalaQoSAppliedActionLatencyread-onlycurrentMaximum latency to allow for traffic.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.23ColumnalaQoSAppliedActionLatencyStatusread-onlycurrentStatus field indicating whether latency is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.24ColumnalaQoSAppliedActionMaximumDepthread-onlycurrentMaximum depth (Kbytes) of queues for traffic. Used for EBS in tri-color marker applications.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.25ColumnalaQoSAppliedActionMaximumDepthStatusread-onlycurrentStatus field indicating whether maximum depth is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.26ColumnalaQoSAppliedActionMaximumBuffersread-onlycurrentMaxmimum buffers for queues for traffic.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.27ColumnalaQoSAppliedActionMaximumBuffersStatusread-onlycurrentStatus field indicating whether maximum buffers is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.28ColumnalaQoSAppliedAction8021pread-onlycurrent802.1p value to stamp on traffic.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.29ColumnalaQoSAppliedAction8021pStatusread-onlycurrentStatus field indicating whether 802.1p is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.30ColumnalaQoSAppliedActionTosread-onlycurrentTOS value to stamp on traffic. (High 3 bits of TOS byte)
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.31ColumnalaQoSAppliedActionTosStatusread-onlycurrentStatus field indicating whether TOS is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.32ColumnalaQoSAppliedActionDscpread-onlycurrentTOS value to stamp on traffic. (High 6 bits of TOS byte)
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.33ColumnalaQoSAppliedActionDscpStatusread-onlycurrentStatus field indicating whether DSCP is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.34ColumnalaQoSAppliedActionMapFromread-onlycurrentWhat field to use as key for mapping 802.1p/TOS/DSCP priorities
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.35ColumnalaQoSAppliedActionMapToread-onlycurrentWhat field to rewrite due to remapping 802.1p/TOS/DSCP priorities
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.36ColumnalaQoSAppliedActionMapGroupread-onlycurrentName of the map group to use when remapping 802.1p/TOS/DSCP priorities.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.37ColumnalaQoSAppliedActionMapGroupStatusread-onlycurrentStatus field indicating whether a map group is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.38ColumnalaQoSAppliedActionSourceRewriteIpAddrread-onlycurrentSource IP address to rewrite on traffic.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.39ColumnalaQoSAppliedActionSourceRewriteIpAddrStatusread-onlycurrentStatus field indicating whether source rewrite IP address & mask is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.40ColumnalaQoSAppliedActionSourceRewriteIpMaskread-onlycurrentSource rewrite IP mask to determine how much of source IP to rewrite.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.41ColumnalaQoSAppliedActionSourceRewriteNetworkGroupread-onlycurrentName of network group containing source address/masks to rewrite on traffic. Must be a one to on correspondence with source network group entries in the condit…
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.42ColumnalaQoSAppliedActionSourceRewriteNetworkGroupStatusread-onlycurrentStatus field indicating whether source rewrite network group is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.43ColumnalaQoSAppliedActionDestinationRewriteIpAddrread-onlycurrentDestination IP address to rewrite on traffic.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.44ColumnalaQoSAppliedActionDestinationRewriteIpAddrStatusread-onlycurrentStatus field indicating whether destination rewrite IP address & mask is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.45ColumnalaQoSAppliedActionDestinationRewriteIpMaskread-onlycurrentDestination rewrite IP mask to determine how much of destination IP to rewrite.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.46ColumnalaQoSAppliedActionDestinationRewriteNetworkGroupread-onlycurrentName of network group containing destination address/masks to rewrite on traffic. Must be a one to on correspondence with destination network group entries in …
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.47ColumnalaQoSAppliedActionDestinationRewriteNetworkGroupStatusread-onlycurrentStatus field indicating whether destination rewrite network group is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.48ColumnalaQoSAppliedActionLoadBalanceGroupread-onlycurrentName of load balance group to use for traffic
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.49ColumnalaQoSAppliedActionLoadBalanceGroupStatusread-onlycurrentStatus field indicating whether load balanace group is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.50ColumnalaQoSAppliedActionPermanentGatewayIpAddrread-onlycurrentNext hop gateway to use for traffic
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.51ColumnalaQoSAppliedActionPermanentGatewayIpAddrStatusread-onlycurrentStatus field indicating whether permanent gateway IP address is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.52ColumnalaQoSAppliedActionAlternateGatewayIpAddrread-onlycurrentNext hop gateway to use for traffic that doesn't have an explicit route. Use this gateway instead of default routes.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.53ColumnalaQoSAppliedActionAlternateGatewayIpAddrStatusread-onlycurrentStatus field indicating whether alternate gateway IP address is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.54ColumnalaQoSAppliedActionRowStatusread-onlycurrentUsed to create/delete actions according to the RowStatus convention
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.55ColumnalaQoSAppliedActionMinimumDepthread-onlycurrentMinimum depth (Kbytes) of queues for traffic. Used for CBS in tri-color marker applications.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.56ColumnalaQoSAppliedActionMinimumDepthStatusread-onlycurrentStatus field indicating whether minimum depth is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.57ColumnalaQoSAppliedActionVPNAccessread-onlycurrentHow to encrypt traffic
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.58ColumnalaQoSAppliedActionNocacheread-onlycurrentWhen enabled, don't make hardware entries for matching flows.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.59ColumnalaQoSAppliedActionPortdisableread-onlycurrentWhen enabled, disable the physical source port of the traffic.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.60ColumnalaQoSAppliedActionRedirectSlotread-onlycurrentDestination physical slot for redirected traffic
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.61ColumnalaQoSAppliedActionRedirectSlotStatusread-onlycurrentStatus for alaQoSAppliedActionRedirectSlotStatus field
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.62ColumnalaQoSAppliedActionRedirectPortread-onlycurrentDestination physical port for redirected traffic
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.63ColumnalaQoSAppliedActionRedirectAggread-onlycurrentDestination linkagg for redirected traffic
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.64ColumnalaQoSAppliedActionRedirectAggStatusread-onlycurrentStatus for alaQoSAppliedActionRedirectAggStatus field
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.65ColumnalaQoSAppliedActionMirrorSlotread-onlycurrentDestination physical slot for mirrored traffic
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.66ColumnalaQoSAppliedActionMirrorPortread-onlycurrentDestination physical port for mirrored traffic
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.67ColumnalaQoSAppliedActionMirrorModeread-onlycurrentMirroring mode
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.68ColumnalaQoSAppliedActionMirrorModeStatusread-onlycurrentStatus for alaQoSAppliedActionMirrorMode field
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.69ColumnalaQoSAppliedActionCIRread-createcurrentCommitted Information Rate - bandwidth values in kilobits per second.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.70ColumnalaQoSAppliedActionCIRStatusread-createcurrentStatus field indicating whether CIR value is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.71ColumnalaQoSAppliedActionCBSread-createcurrentCommitted Burst Size - bucket size in byte.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.72ColumnalaQoSAppliedActionCBSStatusread-createcurrentStatus field indicating whether CBS value is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.73ColumnalaQoSAppliedActionPIRread-createcurrentPeak Information Rate - bandwidth values in kilobits per second.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.74ColumnalaQoSAppliedActionPIRStatusread-createcurrentStatus field indicating whether PIR value is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.75ColumnalaQoSAppliedActionPBSread-createcurrentPeak Burst Size - bucket size in byte.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.76ColumnalaQoSAppliedActionPBSStatusread-createcurrentStatus field indicating whether PBS value is specified(enabled) or not(disabled).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.77ColumnalaQoSAppliedActionCounterColorread-createcurrentSpecifies the color mode for the counters which will be used for sr/trTCM.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.78ColumnalaQoSAppliedActionRTCPMonitorread-createcurrentRTCP Monitor status for the traffic.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.79ColumnalaQoSAppliedActionRTCPMonitorStatusread-createcurrentStatus of the RTCP Monitor field for the traffic.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.80ColumnalaQoSAppliedActionRTCPDSCPread-createcurrentRTCP DSCP number for the traffic.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.81ColumnalaQoSAppliedActionRTCPDSCPStatusread-createcurrentStatus of the RTCP DSCP field for the traffic.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.82ColumnalaQoSAppliedActionTrustDSCPread-createcurrentTrust DSCP status for the traffic.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.28.1.83ColumnalaQoSAppliedActionTrustDSCPStatusread-createcurrentStatus of the Trust DSCP field for the traffic.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29TablealaQoSPortTablenot-accessiblecurrentTable of QoS Port definitions
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1RowalaQoSPortEntrynot-accessiblecurrentDefinition of QoS Port
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.1ColumnalaQoSPortSlotnot-accessiblecurrentPhysical slot port resides on
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.2ColumnalaQoSPortPortnot-accessiblecurrentPhysical port number
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.3ColumnalaQoSPortEnabledread-createcurrentPending QoS enable status for the physical port Does not take effect until an 'Apply' command is issued
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.4ColumnalaQoSPortAppliedEnabledread-onlycurrentCurrent QoS enable status for the physical port
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.5ColumnalaQoSPortInterfaceTyperead-onlycurrentThe type of interface QoS matches for this physical port
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.6ColumnalaQoSPortTrustedread-createcurrentStatus of trusting 802.1p/TOS/DSCP values. When trusted, 802.1p/DSCP values in the packet are passed through the switch. When untrusted, 802.1p/DSCP values are…
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.7ColumnalaQoSPortDefault8021pread-createcurrent802.1p priority value to use for untagged frames arriving on the port and tagged frames when the port is untrusted.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.8ColumnalaQoSPortDefaultDSCPread-createcurrentDSCP value to stamp in frames arriving on the port when the port is untrusted
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.9ColumnalaQoSPortMaximumReservedBandwidthread-createcurrentPending maximum reservable bandwidth on the port. Policies can reserve up to this much bandwidth. Does not take effect until an 'Apply' is issued
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.10ColumnalaQoSPortMaximumReservedBandwidthStatusread-createcurrentPending status field indicating whether to enforce maximum reservable bandwidth on next 'Apply'
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.11ColumnalaQoSPortAppliedMaximumReservedBandwidthread-onlycurrentCurrent maximum reservable bandwidth on the port. Policies can reserve up to this much bandwidth.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.12ColumnalaQoSPortAppliedMaximumReservedBandwidthStatusread-onlycurrentCurrent status field indicating whether to enforce maximum reservable bandwidth.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.13ColumnalaQoSPortMaximumSignalledBandwidthread-createcurrentPending maximum signalled bandwidth on the port. Signalling protocols can reserve up to this much bandwidth. Does not take effect until an 'Apply' is issued
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.14ColumnalaQoSPortMaximumSignalledBandwidthStatusread-createcurrentPending status field indicating whether to enforce maximum signalled bandwidth on next 'Apply'
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.15ColumnalaQoSPortAppliedMaximumSignalledBandwidthread-onlycurrentCurrent maximum signalled bandwidth on the port. Signalling protocols can reserve up to this much bandwidth.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.16ColumnalaQoSPortAppliedMaximumSignalledBandwidthStatusread-onlycurrentCurrent status field indicating whether to enforce maximum signalled bandwidth.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.17ColumnalaQoSPortDefaultQueuesread-createcurrentPending number of default queues for the port Overrides any switch-wide default queue setting
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.18ColumnalaQoSPortAppliedDefaultQueuesread-onlycurrentCurrent number of default queues for the port Overrides any switch-wide default queue setting
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.19ColumnalaQoSPortMaximumDefaultBandwidthread-createcurrentPending maximum default bandwidth (Kbits/sec). Maximum rate for default queues on this port Does not take effect until an 'Apply' command is issued
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.20ColumnalaQoSPortMaximumDefaultBandwidthStatusread-createcurrentPending status field indicating whether to enforce maximum default bandwidth on next 'Apply'
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.21ColumnalaQoSPortAppliedMaximumDefaultBandwidthread-onlycurrentCurrent maximum default bandwidth (Kbits/sec). Maximum rate for default queues this port
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.22ColumnalaQoSPortAppliedMaximumDefaultBandwidthStatusread-onlycurrentCurrent status field indicating whether to enforce maximum default bandwidth.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.23ColumnalaQoSPortMaximumDefaultDepthread-createcurrentPending maximum depth of egress queues (Kbytes). Maximum depth of queues on this port Does not take effect until an 'Apply' command is issued
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.24ColumnalaQoSPortMaximumDefaultDepthStatusread-createcurrentPending status field indicating whether to enforce maximum depth on next 'Apply'
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.25ColumnalaQoSPortAppliedMaximumDefaultDepthread-onlycurrentCurrent maximum depth of egress queues (Kbytes). Maximum depth of queues on this port
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.26ColumnalaQoSPortAppliedMaximumDefaultDepthStatusread-onlycurrentCurrent status field indicating whether to enforce maximum depth.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.27ColumnalaQoSPortMaximumDefaultBuffersread-createcurrentPending maximum buffers for egress queues. Maximum number of buffers for queues on this port Does not take effect until an 'Apply' command is issued
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.28ColumnalaQoSPortMaximumDefaultBuffersStatusread-createcurrentPending status field indicating whether to enforce maximum buffers on next 'Apply'
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.29ColumnalaQoSPortAppliedMaximumDefaultBuffersread-onlycurrentCurrent maximum buffers for egress queues. Maximum number of buffers for queues on this port
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.30ColumnalaQoSPortAppliedMaximumDefaultBuffersStatusread-onlycurrentCurrent status field indicating whether to enforce maximum buffers.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.31ColumnalaQoSPortResetread-createcurrentReset all QoS parameters to default values
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.32ColumnalaQoSPortPhysicalBandwidthread-onlycurrentPhysical bandwidth of port (Kbit/sec)
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.33ColumnalaQoSPortReservedBandwidthread-onlycurrentBandwidth reserved by policies on port (Kbit/sec)
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.34ColumnalaQoSPortSignalledBandwidthread-onlycurrentBandwidth reserved by signalling on port (Kbit/sec)
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.35ColumnalaQoSPortCurrentBandwidthread-onlycurrentCurrent measured bandwidth of port (Kbits/sec)
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.36ColumnalaQoSPortDefaultQidLowread-onlycurrentDefault low queue ID
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.37ColumnalaQoSPortDefaultQidMediumread-onlycurrentDefault medium queue ID
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.38ColumnalaQoSPortDefaultQidHighread-onlycurrentDefault high queue ID
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.39ColumnalaQoSPortDefaultQidUrgentread-onlycurrentDefault urgent queue ID
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.40ColumnalaQoSPortFloodQidread-onlycurrentID of the flood queue
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.41ColumnalaQoSPortQueuesread-onlycurrentNumber of queues currently on the port
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.42ColumnalaQoSPortQueuesCreatedread-onlycurrentNumber of queue requests on the port
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.43ColumnalaQoSPortQueuesFailedread-onlycurrentNumber of queue requests that failed on the port
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.44ColumnalaQoSPortQueuesPreemptedread-onlycurrentNumber of queues preempted on the port
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.45ColumnalaQoSPortRowStatusread-createcurrentUsed to create/delete ports according to the RowStatus convention
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.46ColumnalaQoSPortFirPrio0EnqBytesread-onlycurrentFirenze priority 0 enqueue byte count
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.47ColumnalaQoSPortFirPrio0DeqBytesread-onlycurrentFirenze priority 0 dequeue byte count
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.48ColumnalaQoSPortFirPrio0EnqPktsread-onlycurrentFirenze priority 0 enqueue packet count
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.49ColumnalaQoSPortFirPrio0DeqPktsread-onlycurrentFirenze priority 0 dequeue packet count
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.50ColumnalaQoSPortFirPrio0QidDiscardPktsread-onlycurrentFirenze priority 0 QID discard packet count
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.51ColumnalaQoSPortFirPrio0WredDiscardPktsread-onlycurrentFirenze priority 0 WRED discard packet count
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.52ColumnalaQoSPortFirPrio0OverflowDiscardPktsread-onlycurrentFirenze priority 0 overflow discard packet count
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.53ColumnalaQoSPortFirPrio1EnqBytesread-onlycurrentFirenze priority 1 enqueue byte count
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.54ColumnalaQoSPortFirPrio1DeqBytesread-onlycurrentFirenze priority 1 dequeue byte count
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.55ColumnalaQoSPortFirPrio1EnqPktsread-onlycurrentFirenze priority 1 enqueue packet count
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.56ColumnalaQoSPortFirPrio1DeqPktsread-onlycurrentFirenze priority 1 dequeue packet count
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.57ColumnalaQoSPortFirPrio1QidDiscardPktsread-onlycurrentFirenze priority 1 QID discard packet count
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.58ColumnalaQoSPortFirPrio1WredDiscardPktsread-onlycurrentFirenze priority 1 WRED discard packet count
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.59ColumnalaQoSPortFirPrio1OverflowDiscardPktsread-onlycurrentFirenze priority 1 overflow discard packet count
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.60ColumnalaQoSPortFirPrio2EnqBytesread-onlycurrentFirenze priority 2 enqueue byte count
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.61ColumnalaQoSPortFirPrio2DeqBytesread-onlycurrentFirenze priority 2 dequeue byte count
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.62ColumnalaQoSPortFirPrio2EnqPktsread-onlycurrentFirenze priority 2 enqueue packet count
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.63ColumnalaQoSPortFirPrio2DeqPktsread-onlycurrentFirenze priority 2 dequeue packet count
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.64ColumnalaQoSPortFirPrio2QidDiscardPktsread-onlycurrentFirenze priority 2 QID discard packet count
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.65ColumnalaQoSPortFirPrio2WredDiscardPktsread-onlycurrentFirenze priority 2 WRED discard packet count
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.66ColumnalaQoSPortFirPrio2OverflowDiscardPktsread-onlycurrentFirenze priority 2 overflow discard packet count
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.67ColumnalaQoSPortFirPrio3EnqBytesread-onlycurrentFirenze priority 3 enqueue byte count
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.68ColumnalaQoSPortFirPrio3DeqBytesread-onlycurrentFirenze priority 3 dequeue byte count
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.69ColumnalaQoSPortFirPrio3EnqPktsread-onlycurrentFirenze priority 3 enqueue packet count
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.70ColumnalaQoSPortFirPrio3DeqPktsread-onlycurrentFirenze priority 3 dequeue packet count
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.71ColumnalaQoSPortFirPrio3QidDiscardPktsread-onlycurrentFirenze priority 3 QID discard packet count
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.72ColumnalaQoSPortFirPrio3WredDiscardPktsread-onlycurrentFirenze priority 3 WRED discard packet count
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.73ColumnalaQoSPortFirPrio3OverflowDiscardPktsread-onlycurrentFirenze priority 3 overflow discard packet count
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.74ColumnalaQoSPortDefaultClassificationread-createcurrentIngress traffic classification parameter for Firenze port What field to interpret as priority for WRED
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.75ColumnalaQoSPortLowPriorityWeightread-createcurrentWeight to use for low priority egress queue on fixed queue blades.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.76ColumnalaQoSPortMediumPriorityWeightread-createcurrentWeight to use for medium priority egress queue on fixed queue blades.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.77ColumnalaQoSPortHighPriorityWeightread-createcurrentWeight to use for high priority egress queue on fixed queue blades.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.78ColumnalaQoSPortUrgentPriorityWeightread-createcurrentWeight to use for urgent priority egress queue on fixed queue blades.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.79ColumnalaQoSPortMaximumBandwidthread-createcurrentMaximum egress bandwidth (Kbits/sec). Maximum rate to send traffic out this port
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.80ColumnalaQoSPortMaximumBandwidthStatusread-createcurrentStatus field indicating whether to enforce maximum bandwidth on port.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.81ColumnalaQoSPortEnqueuingThresholdP0Lowerread-createcurrentPriority 0 FIFO lower threshold for high density module
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.82ColumnalaQoSPortEnqueuingThresholdP0Upperread-createcurrentPriority 0 FIFO upper threshold for high density module
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.83ColumnalaQoSPortEnqueuingThresholdP1Lowerread-createcurrentPriority 1 FIFO lower threshold for high density module
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.84ColumnalaQoSPortEnqueuingThresholdP1Upperread-createcurrentPriority 1 FIFO upper threshold for high density module
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.85ColumnalaQoSPortEnqueuingThresholdP2Lowerread-createcurrentPriority 2 FIFO lower threshold for high density module
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.86ColumnalaQoSPortEnqueuingThresholdP2Upperread-createcurrentPriority 2 FIFO upper threshold for high density module
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.87ColumnalaQoSPortEnqueuingThresholdP3Lowerread-createcurrentPriority 3 FIFO lower threshold for high density module
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.88ColumnalaQoSPortEnqueuingThresholdP3Upperread-createcurrentPriority 3 FIFO upper threshold for high density module
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.89ColumnalaQoSPortEnqueuingThresholdStatusread-createcurrentStatus field indicating whether enqueuing thresholds need to be enforced on high density module.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.90ColumnalaQoSPortHighDensityread-onlycurrentIndicates whether this is a high-density port or not.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.91ColumnalaQoSPortServicingModeread-createcurrentServicing mode for the port
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.92ColumnalaQoSPortFreeFFPRulesread-onlycurrentNumber of Free FPP rule entries
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.93ColumnalaQoSPortUsedFFPRulesread-onlycurrentNumber of Used FPP rule entries
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.94ColumnalaQoSPortFreeFFPMasksread-onlycurrentNumber of Free FPP mask entries
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.95ColumnalaQoSPortUsedFFPMasksread-onlycurrentNumber of Free FPP mask enries
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.96ColumnalaQoSPortSpoofedCountread-onlycurrentSpoofed packet count
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.97ColumnalaQoSPortNonSpoofedCountread-onlycurrentNon-spoofed packet count
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.98ColumnalaQoSPortQ4PriorityWeightread-createcurrentWeight to use for cos queue 4.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.99ColumnalaQoSPortQ5PriorityWeightread-createcurrentWeight to use for cos queue 5.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.100ColumnalaQoSPortQ6PriorityWeightread-createcurrentWeight to use for cos queue 6.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.101ColumnalaQoSPortQ7PriorityWeightread-createcurrentWeight to use for cos queue 7.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.102ColumnalaQoSPortCOS0MaximumBandwidthread-createcurrentMaximum egress bandwidth (Kbits/sec). Maximum rate to send traffic out this queue
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.103ColumnalaQoSPortCOS0MaximumBandwidthStatusread-createcurrentStatus field indicating whether to enforce maximum bandwidth on queue.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.104ColumnalaQoSPortCOS1MaximumBandwidthread-createcurrentMaximum egress bandwidth (Kbits/sec). Maximum rate to send traffic out this queue
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.105ColumnalaQoSPortCOS1MaximumBandwidthStatusread-createcurrentStatus field indicating whether to enforce maximum bandwidth on queue.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.106ColumnalaQoSPortCOS2MaximumBandwidthread-createcurrentMaximum egress bandwidth (Kbits/sec). Maximum rate to send traffic out this queue
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.107ColumnalaQoSPortCOS2MaximumBandwidthStatusread-createcurrentStatus field indicating whether to enforce maximum bandwidth on queue.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.108ColumnalaQoSPortCOS3MaximumBandwidthread-createcurrentMaximum egress bandwidth (Kbits/sec). Maximum rate to send traffic out this queue
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.109ColumnalaQoSPortCOS3MaximumBandwidthStatusread-createcurrentStatus field indicating whether to enforce maximum bandwidth on queue.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.110ColumnalaQoSPortCOS4MaximumBandwidthread-createcurrentMaximum egress bandwidth (Kbits/sec). Maximum rate to send traffic out this queue
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.111ColumnalaQoSPortCOS4MaximumBandwidthStatusread-createcurrentStatus field indicating whether to enforce maximum bandwidth on queue.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.112ColumnalaQoSPortCOS5MaximumBandwidthread-createcurrentMaximum egress bandwidth (Kbits/sec). Maximum rate to send traffic out this queue
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.113ColumnalaQoSPortCOS5MaximumBandwidthStatusread-createcurrentStatus field indicating whether to enforce maximum bandwidth on queue.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.114ColumnalaQoSPortCOS6MaximumBandwidthread-createcurrentMaximum egress bandwidth (Kbits/sec). Maximum rate to send traffic out this queue
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.115ColumnalaQoSPortCOS6MaximumBandwidthStatusread-createcurrentStatus field indicating whether to enforce maximum bandwidth on queue.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.116ColumnalaQoSPortCOS7MaximumBandwidthread-createcurrentMaximum egress bandwidth (Kbits/sec). Maximum rate to send traffic out this queue
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.117ColumnalaQoSPortCOS7MaximumBandwidthStatusread-createcurrentStatus field indicating whether to enforce maximum bandwidth on queue.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.118ColumnalaQoSPortCOS0MinimumBandwidthread-createcurrentMinimum egress bandwidth (Kbits/sec). Minimum rate to send traffic out this queue
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.119ColumnalaQoSPortCOS0MinimumBandwidthStatusread-createcurrentStatus field indicating whether to enforce minimum bandwidth on queue.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.120ColumnalaQoSPortCOS1MinimumBandwidthread-createcurrentMinimum egress bandwidth (Kbits/sec). Minimum rate to send traffic out this queue
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.121ColumnalaQoSPortCOS1MinimumBandwidthStatusread-createcurrentStatus field indicating whether to enforce minimum bandwidth on queue.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.122ColumnalaQoSPortCOS2MinimumBandwidthread-createcurrentMinimum egress bandwidth (Kbits/sec). Minimum rate to send traffic out this queue
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.123ColumnalaQoSPortCOS2MinimumBandwidthStatusread-createcurrentStatus field indicating whether to enforce minimum bandwidth on queue.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.124ColumnalaQoSPortCOS3MinimumBandwidthread-createcurrentMinimum egress bandwidth (Kbits/sec). Minimum rate to send traffic out this queue
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.125ColumnalaQoSPortCOS3MinimumBandwidthStatusread-createcurrentStatus field indicating whether to enforce minimum bandwidth on queue.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.126ColumnalaQoSPortCOS4MinimumBandwidthread-createcurrentMinimum egress bandwidth (Kbits/sec). Minimum rate to send traffic out this queue
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.127ColumnalaQoSPortCOS4MinimumBandwidthStatusread-createcurrentStatus field indicating whether to enforce minimum bandwidth on queue.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.128ColumnalaQoSPortCOS5MinimumBandwidthread-createcurrentMinimum egress bandwidth (Kbits/sec). Minimum rate to send traffic out this queue
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.129ColumnalaQoSPortCOS5MinimumBandwidthStatusread-createcurrentStatus field indicating whether to enforce minimum bandwidth on queue.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.130ColumnalaQoSPortCOS6MinimumBandwidthread-createcurrentMinimum egress bandwidth (Kbits/sec). Minimum rate to send traffic out this queue
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.131ColumnalaQoSPortCOS6MinimumBandwidthStatusread-createcurrentStatus field indicating whether to enforce minimum bandwidth on queue.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.132ColumnalaQoSPortCOS7MinimumBandwidthread-createcurrentMinimum egress bandwidth (Kbits/sec). Minimum rate to send traffic out this queue
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.133ColumnalaQoSPortCOS7MinimumBandwidthStatusread-createcurrentStatus field indicating whether to enforce minimum bandwidth on queue.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.134ColumnalaQoSPortMaximumIngBandwidthread-createcurrentMaximum igress bandwidth (Kbits/sec). Maximum rate to recieve traffic in on this port
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.135ColumnalaQoSPortMaximumIngBandwidthStatusread-createcurrentStatus field indicating whether to enforce maximum bandwidth on port.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.136ColumnalaQoSPortDEIMarkingread-createcurrent
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.137ColumnalaQoSPortMonitorread-createcurrent
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.29.1.138ColumnalaQoSPortDEIMappingread-createcurrent
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30NodealaQoSConfig
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.1ScalaralaQoSConfigEnabledread-writecurrentIs QoS enabled on the switch
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.2ScalaralaQoSConfigDefaultQueuesread-writecurrentPending number of default queues to create for each port. Can be overridden on a port by port basis. Does not take affect until an 'Apply' command is issued.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.3ScalaralaQoSConfigAppliedDefaultQueuesread-onlycurrentNumber of default queues configured at last 'Apply' command.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.4ScalaralaQoSConfigTrustPortsread-writecurrentFlag to indicate whether to trust the 802.1p/TOS values on incoming traffic by default. Can be overridden on a port by port basis.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.5ScalaralaQoSConfigFlowTimeoutread-writecurrentPending flow timeout (seconds). Flows are removed from hardware/software if no traffic is seen for this many seconds. Does not take effect until an 'Apply' com…
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.6ScalaralaQoSConfigAppliedFlowTimeoutread-onlycurrentCurrent flow timeout (seconds). Flows are removed from hardware/software if no traffic is seen for this many seconds.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.7ScalaralaQoSConfigFragmentTimeoutread-writecurrentPending fragment timeout (seconds). Packet fragments are remembered for this many seconds. Does not take effect until an 'Apply' command is issued
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.8ScalaralaQoSConfigAppliedFragmentTimeoutread-onlycurrentCurrent fragment timeout (seconds). Packet fragments are remembered for this many seconds.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.9ScalaralaQoSConfigReflexiveTimeoutread-writecurrentPending reflexive timeout (seconds). Anticipate reverse flows for reflexive and NAT connections for this long until we see a response. Does not take effect unt…
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.10ScalaralaQoSConfigAppliedReflfexiveTimeoutread-onlycurrentCurrent reflexive timeout (seconds). Anticipate reverse flows for reflexive and NAT connections for this long until we see a response.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.11ScalaralaQoSConfigNatTimeoutread-writecurrentPending nat timeout (seconds). Once traffic is seen in both directions for anticipated flows, length of time to remember the flow without seeing traffic in eit…
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.12ScalaralaQoSConfigAppliedNatTimeoutread-onlycurrentCurrent nat timeout (seconds). Once traffic is seen in both directions for anticipated flows, length of time to remember the flow without seeing traffic in eit…
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.13ScalaralaQoSConfigClassifyl3Bridgedread-writecurrentPending indicator for looking at L3/L4 parameters of bridged traffic. Does not take effect until an 'Apply' command is issued.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.14ScalaralaQoSConfigAppliedClassifyl3Bridgedread-onlycurrentCurrent indicator for looking at L3/L4 parameters of bridged traffic.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.15ScalaralaQoSConfigClassifyFragmentsread-writecurrentPending indicator for classifying fragmented traffic at L4 Does not take effect until an 'Apply' command is issued
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.16ScalaralaQoSConfigAppliedClassifyFragmentsread-onlycurrentCurrent indicator for classifying fragmented traffic at L4 Does not take effect until an 'Apply' command is issued
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.17ScalaralaQoSConfigDefaultBridgedDispositionread-writecurrentPending disposition of bridged traffic that doesn't match a policy. Does not take effect until an 'Apply' command is issued.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.18ScalaralaQoSConfigAppliedDefaultBridgedDispositionread-onlycurrentCurrent disposition of bridged traffic that doesn't match a policy.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.19ScalaralaQoSConfigDefaultRoutedDispositionread-writecurrentPending disposition of routed traffic that doesn't match a policy. Does not take effect until an 'Apply' command is issued.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.20ScalaralaQoSConfigAppliedDefaultRoutedDispositionread-onlycurrentCurrent disposition of routed traffic that doesn't match a policy
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.21ScalaralaQoSConfigDefaultMulticastDispositionread-writecurrentPending disposition of IGMP requests that don't match a policy Does not take effect until an 'Apply' command is issued
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.22ScalaralaQoSConfigAppliedDefaultMulticastDispositionread-onlycurrentCurrent disposition of IGMP requests that don't match a policy
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.23ScalaralaQoSConfigStatsIntervalread-writecurrentInterval in seconds for how often statistics are updated
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.24ScalaralaQoSConfigLogLinesread-writecurrentNumber of log lines to maintain in the QoS log
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.25ScalaralaQoSConfigLogLevelread-writecurrentThe level of logging desired. The higher the level, the more verbose the logging
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.26ScalaralaQoSConfigLogConsoleread-writecurrentWhether QoS log events are logged to the console
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.27ScalaralaQoSConfigForwardLogread-writecurrentWhether QoS forwards logging events to PolicyManager
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.28ScalaralaQoSConfigClearLogread-writecurrentClear the QoS log
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.29ScalaralaQoSConfigApplyread-writecurrentSet to apply all pending QoS configuration/policy changes
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.30ScalaralaQoSConfigRevertread-writecurrentSet to revert all pending QoS configuration/policy changes
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.31ScalaralaQoSConfigResetread-writecurrentSet to reset global QoS configuration parameters to their default values
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.32ScalaralaQoSConfigStatsResetread-writecurrentSet to reset global QoS statistics counters
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.33ScalaralaQoSConfigFlushread-writecurrentFlush all pending policy objects
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.34ScalaralaQoSConfigDebugread-writecurrentPossible debug flags for QoS
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.35ScalaralaQoSConfigServicingModeread-createcurrentServicing mode for the system
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.36ScalaralaQoSConfigLowPriorityWeightread-createcurrentWeight to use for low priority queue(0) on fixed queue blades
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.37ScalaralaQoSConfigMediumPriorityWeightread-createcurrentWeight to use for medium priority queue(1) on fixed queue blades
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.38ScalaralaQoSConfigHighPriorityWeightread-createcurrentWeight to use for high priority queue(2) on fixed queue blades
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.39ScalaralaQoSConfigUrgentPriorityWeightread-createcurrentWeight to use for urgent priority queue(3) on fixed queue blades
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.40ScalaralaQoSConfigQ4PriorityWeightread-createcurrentWeight to use for COS 4 priority queue(4) on fixed queue blades
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.41ScalaralaQoSConfigQ5PriorityWeightread-createcurrentWeight to use for COS 5 priority queue(5) on fixed queue blades
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.42ScalaralaQoSConfigQ6PriorityWeightread-createcurrentWeight to use for COS 6 priority queue(6) on fixed queue blades
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.43ScalaralaQoSConfigQ7PriorityWeightread-createcurrentWeight to use for COS 7 priority queue(7) on fixed queue blades
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.44ScalaralaQoSConfigUserportFilterread-createcurrentEvents/protocols to filter on a Userport. Event bits values are: spoof = 1 bpdu = 2 bgp = 4 ospf = 8 rip = 16 vrrp = 32 dhcp-server = 64 pim = 128 dvmrp = 256 …
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.45ScalaralaQoSConfigAppliedUserportFilterread-onlycurrentEvents/protocols to filter on a Userport. Event bits values are: spoof = 1 bpdu = 2 bgp = 4 ospf = 8 rip = 16 vrrp = 32 dhcp-server = 64 pim = 128 dvmrp = 256 …
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.46ScalaralaQoSConfigUserportShutdownread-createcurrentEvents/protocols that trigger admin down of a Userport. Event bits values are: spoof = 1 bpdu = 2 bgp = 4 ospf = 8 rip = 16 vrrp = 32 dhcp-server = 64 pim = 12…
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.47ScalaralaQoSConfigAppliedUserportShutdownread-onlycurrentEvents/protocols that trigger admin down of a Userport. Event bits values are: spoof = 1 bpdu = 2 bgp = 4 ospf = 8 rip = 16 vrrp = 32 dhcp-server = 64 pim = 12…
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.48ScalaralaQoSConfigAutoNMSread-writecurrentFlag to indicate whether to Prioritize NMS traffic by default.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.49ScalaralaQoSConfigAutoPhonesread-writecurrentAuto configure CSBU Phones pri0-7 - will replace the priority. trusted - will allow priority from the orginator to be used. disable - will unconfigure to featu…
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.50ScalaralaQoSConfigQMPageread-writecurrentFlag to indicate whether to send back a quarantined page when a client is quarantined but a remediation URL is not specified.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.51ScalaralaQoSConfigQMMACGroupread-writecurrentGroup name for quarantine manager quarantined MACs.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.52ScalaralaQoSConfigQMPathread-writecurrentDefault path for remediation server redirect.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.53ScalaralaQoSConfigDEIMappingread-createcurrentThis object specifies, in ingress traffic, the DEI/CFI bit is mapped or not to internal drop precedence or yellow color. enabled(1) color if that bit is set. d…
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.54ScalaralaQoSConfigDEIMarkingread-createcurrentThis object specifies, in egress traffic, the DEI/CFI bit is mapped or not to internal drop precedence or yellow color. enabled(1) color if that bit is set. di…
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.55ScalaralaQoSConfigStatsResetEgressread-writecurrentSet to reset global Egress QoS statistics counters
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.56ScalaralaQoSConfigForceYellowPriorityread-writecurrentChange the Priority for Yellow Traffic pri0-7 - will replace the priority. disable - will unconfigure to feature.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.57ScalaralaQoSConfigMulticastRateLimitread-writecurrentUsed to set rate Limit in case of Qos debug
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.60ScalaralaQoSConfigUserportLinkShutdownread-createcurrentEvents/protocols that trigger link shut down of a Userport. Event bits values are: spoof = 1 bpdu = 2 bgp = 4 ospf = 8 rip = 16 vrrp = 32 dhcp-server = 64 pim …
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.61ScalaralaQoSConfigAppliedUserportLinkShutdownread-onlycurrentEvents/protocols that trigger Link shut down of a Userport. Event bits values are: spoof = 1 bpdu = 2 bgp = 4 ospf = 8 rip = 16 vrrp = 32 dhcp-server = 64 pim …
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.30.62ScalaralaQoSConfigNATFlushread-writecurrentFlush all NAT Flow entries
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31NodealaQoSStats
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.1ScalaralaQoSStatsL2Eventsread-onlycurrentNumber of L2 classification events
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.2ScalaralaQoSStatsL2Matchesread-onlycurrentNumber of L2 classifications matching a policy
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.3ScalaralaQoSStatsL2Dropsread-onlycurrentNumber of L2 classifications matching a drop policy
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.4ScalaralaQoSStatsL3IngressEventsread-onlycurrentNumber of L3/L4 ingress classification events
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.5ScalaralaQoSStatsL3IngressMatchesread-onlycurrentNumber of L3 ingress classifications matching a policy
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.6ScalaralaQoSStatsL3IngressDropsread-onlycurrentNumber of L3 ingress classifications matching a drop policy
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.7ScalaralaQoSStatsL3EgressEventsread-onlycurrentNumber of L3/L4 egress classification events
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.8ScalaralaQoSStatsL3EgressMatchesread-onlycurrentNumber of L3 egress classifications matching a policy
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.9ScalaralaQoSStatsL3EgressDropsread-onlycurrentNumber of L3 egress classifications matching a drop policy
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.10ScalaralaQoSStatsMulticastEventsread-onlycurrentNumber of IGMP classification events
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.11ScalaralaQoSStatsMulticastMatchesread-onlycurrentNumber of IGMP classifications matching a policy
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.12ScalaralaQoSStatsMulticastDropsread-onlycurrentNumber of IGMP classifications matching a drop policy
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.13ScalaralaQoSStatsFragmentsread-onlycurrentNumber of fragments processed by QoS
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.14ScalaralaQoSStatsBadFragmentsread-onlycurrentNumber of illegal (offset = 1) fragments
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.15ScalaralaQoSStatsUnknownFragmentsread-onlycurrentNumber of out of order fragment pieces
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.16ScalaralaQoSStatsReflexiveFlowsread-onlycurrentNumber of reflexive flow entries
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.17ScalaralaQoSStatsReflexiveCorrectionsread-onlycurrentNumber of reflexive flow corrections
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.18ScalaralaQoSStatsLoadBalanceFlowsread-onlycurrentNumber of server load balanced flow entries
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.19ScalaralaQoSStatsClassifierMaxNodesread-onlycurrentHighest number of nodes in classifier tree
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.20ScalaralaQoSStatsClassifierMaxDepthread-onlycurrentLength of longest path in classifier tree
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.21ScalaralaQoSStatsFlowLookupsread-onlycurrentNumber of flow table lookups
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.22ScalaralaQoSStatsFlowHitsread-onlycurrentNumber of flow table lookup hits
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.23ScalaralaQoSStatsSentNIMessagesread-onlycurrentNumber of messages sent to NIs
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.24ScalaralaQoSStatsReceivedNIMessagesread-onlycurrentNumber of messages received from NIs
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.25ScalaralaQoSStatsFailedNIMessagesread-onlycurrentNumber of failed message attemptes to NIs
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.26ScalaralaQoSStatsSpoofedEventsread-onlycurrentTotal Number of spoofed events
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.27ScalaralaQoSStatsNonSpoofedEventsread-onlycurrentTotal number of non-spoofed events
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.31.28ScalaralaQoSStatsDropServicesEventsread-onlycurrentTotal number of packets matching the DropServices group
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32TablealaQoSQueueTablenot-accessiblecurrentTable of QoS Queue definitions
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1RowalaQoSQueueEntrynot-accessiblecurrentDefinition of QoS Queue
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.1ColumnalaQoSQueueIdnot-accessiblecurrentInternal queue identifier
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.2ColumnalaQoSQueueSlotread-onlycurrentPhysical slot queue is destined to
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.3ColumnalaQoSQueuePortread-onlycurrentPhysical port queue is destined to
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.4ColumnalaQoSQueuePortIdread-onlycurrentInternal global port id of destination port
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.5ColumnalaQoSQueueTyperead-onlycurrentType of queueing done on this queue
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.6ColumnalaQoSQueuePriorityread-onlycurrentQueueing priority for the queue
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.7ColumnalaQoSQueueMinimumBandwidthread-onlycurrentMinimum bandwidth (Kbits/sec) given to the queue
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.8ColumnalaQoSQueueMaximumBandwidthread-onlycurrentMaximum bandwidth (Kbits/sec) given to the queue
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.9ColumnalaQoSQueueAverageBandwidthread-onlycurrentAverage measured bandwidth (Kbits/sec) for the queue
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.10ColumnalaQoSQueueMinimumDepthread-onlycurrentMinimum depth (Kbytes) of the queue
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.11ColumnalaQoSQueueMaximumDepthread-onlycurrentMaximum depth (Kbytes) of the queue
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.12ColumnalaQoSQueueMaximumBuffersread-onlycurrentMaximum number of buffers for the queue
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.13ColumnalaQoSQueue8021pread-onlycurrent802.1p value queue places on traffic
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.14ColumnalaQoSQueuePacketsSentread-onlycurrentNumber of packets sent through the queue
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.15ColumnalaQoSQueuePacketsDroppedread-onlycurrentNumber of packets dropped trying to queue into this queue
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.16ColumnalaQoSQueueMaxLengthread-onlycurrentMaximum measured length the queue has reached in buffers
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.17ColumnalaQoSQueueAverageLengthread-onlycurrentAverage measured length of the queue in buffers
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.18ColumnalaQoSQueueCurrentLengthread-onlycurrentCurrent measured length of the queue in buffers
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.32.1.19ColumnalaQoSQueueActionread-onlycurrentName of the action this queue was created from
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33TablealaQoSSlotTablenot-accessiblecurrentTable of QoS Slot definitions
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1RowalaQoSSlotEntrynot-accessiblecurrentDefinition of QoS Slot
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.1ColumnalaQoSSlotSlotnot-accessiblecurrentPhysical slot number
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.2ColumnalaQoSSlotSlicenot-accessiblecurrentPhysical device number on slot
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.3ColumnalaQoSSlotTyperead-onlycurrentType of hardware in this slot/slice
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.4ColumnalaQoSSlotMaxBuffersread-onlycurrentMaximum total buffers on this slot/slice
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.5ColumnalaQoSSlotFreeBuffers1read-onlycurrentCurrent free buffers in list 1
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.6ColumnalaQoSSlotFreeBuffers2read-onlycurrentCurrent free buffers in list 2
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.7ColumnalaQoSSlotThreshold1Lowread-onlycurrentBuffer are not given to low priority traffic from list 1 when free buffers in list 1 is less than this threshold.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.8ColumnalaQoSSlotThreshold1Mediumread-onlycurrentBuffer are not given to medium priority traffic from list 1 when free buffers in list 1 is less than this threshold.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.9ColumnalaQoSSlotThreshold1Highread-onlycurrentBuffer are not given to high priority traffic from list 1 when free buffers in list 1 is less than this threshold.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.10ColumnalaQoSSlotThreshold1Urgentread-onlycurrentBuffer are not given to urgent priority traffic from list 1 when free buffers in list 1 is less than this threshold.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.11ColumnalaQoSSlotThreshold2Lowread-onlycurrentBuffer are not given to low priority traffic from list 2 when free buffers in list 2 is less than this threshold.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.12ColumnalaQoSSlotThreshold2Mediumread-onlycurrentBuffer are not given to medium priority traffic from list 2 when free buffers in list 2 is less than this threshold.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.13ColumnalaQoSSlotThreshold2Highread-onlycurrentBuffer are not given to high priority traffic from list 2 when free buffers in list 2 is less than this threshold.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.14ColumnalaQoSSlotThreshold2Urgentread-onlycurrentBuffer are not given to urgent priority traffic from list 2 when free buffers in list 2 is less than this threshold.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.15ColumnalaQoSSlotBuffersDeniedread-onlycurrentBuffers denied on this slot
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.16ColumnalaQoSSlotBuffersDeniedAverageread-onlycurrentAverage number of denied buffers over time
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.17ColumnalaQoSSlotBuffersDroppedread-onlycurrentBuffers dropped on this slot
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.18ColumnalaQoSSlotBuffersDroppedAverageread-onlycurrentAverage number of dropped buffers over time
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.19ColumnalaQoSSlotWredThresholdP0Lowerread-createcurrentPriority 0 WRED lower threshold for high density module
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.20ColumnalaQoSSlotWredThresholdP0Upperread-createcurrentPriority 0 WRED upper threshold for high density module
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.21ColumnalaQoSSlotWredThresholdP1Lowerread-createcurrentPriority 1 WRED lower threshold for high density module
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.22ColumnalaQoSSlotWredThresholdP1Upperread-createcurrentPriority 1 WRED upper threshold for high density module
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.23ColumnalaQoSSlotWredThresholdP2Lowerread-createcurrentPriority 2 WRED lower threshold for high density module
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.24ColumnalaQoSSlotWredThresholdP2Upperread-createcurrentPriority 2 WRED upper threshold for high density module
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.25ColumnalaQoSSlotWredThresholdP3Lowerread-createcurrentPriority 3 WRED lower threshold for high density module
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.26ColumnalaQoSSlotWredThresholdP3Upperread-createcurrentPriority 3 WRED upper threshold for high density module
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.27ColumnalaQoSSlotWredAverageCounterWeightread-createcurrentThe weight used in the WRED algorithm. It is used as a negative power of 2
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.28ColumnalaQoSSlotWredThresholdStatusread-createcurrentStatus field indicating whether WRED maximum thresholds are specified(enable) or not(disable).
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.29ColumnalaQoSSlotCbqThresholdModeread-createcurrentServicing mode for the CBQ thresholds for high density modules
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.30ColumnalaQoSSlotCbqThresholdP1read-createcurrentPriority 1 CBQ threshold for high density module
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.31ColumnalaQoSSlotCbqThresholdP2read-createcurrentPriority 2 CBQ threshold for high density module
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.32ColumnalaQoSSlotCbqThresholdP3read-createcurrentPriority 3 CBQ threshold for high density module
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.33.1.33ColumnalaQoSSlotHighDensityread-onlycurrentIndicates whether this is a high-density slice or not.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34NodealaQoSClassify
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.1ScalaralaQoSClassifyClassifyread-writecurrentWhich classification routine to run on the sample packet
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.2ScalaralaQoSClassifyAppliedread-writecurrentWhat set of policies QoS uses when testing the classifier. When yes(1) the applied policies are used. When no(2) the pending policies are used.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.3ScalaralaQoSClassifySourceSlotread-writecurrentSource physical slot to submit when testing classifier.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.4ScalaralaQoSClassifySourcePortread-writecurrentSource physical port to submit when testing classifier.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.5ScalaralaQoSClassifySourceInterfaceTyperead-writecurrentSource interface type to submit when testing classifier.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.6ScalaralaQoSClassifyDestinationSlotread-writecurrentDestination physical slot to submit when testing classifier.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.7ScalaralaQoSClassifyDestinationPortread-writecurrentDestination physical port to submit when testing classifier.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.8ScalaralaQoSClassifyDestinationInterfaceTyperead-writecurrentDestination interface type to submit when testing classifier.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.9ScalaralaQoSClassifySourceMacread-writecurrentSource MAC address to submit when testing classifier.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.10ScalaralaQoSClassifyDestinationMacread-writecurrentDestination MAC address to submit when testing classifier.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.11ScalaralaQoSClassifySourceVlanread-writecurrentSource VLAN to submit when testing classifier.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.12ScalaralaQoSClassifyDestinationVlanread-writecurrentDestination VLAN to submit when testing classifier.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.13ScalaralaQoSClassify8021pread-writecurrent802.1p value to submit when testing classifier.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.14ScalaralaQoSClassifySourceIpread-writecurrentSource IP address to submit when testing classifier.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.15ScalaralaQoSClassifyDestinationIpread-writecurrentDestination IP address to submit when testing classifier.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.16ScalaralaQoSClassifyMulticastIpread-writecurrentMulticast IP address to submit when testing classifier.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.17ScalaralaQoSClassifyTosread-writecurrentTOS value to submit when testing classifier.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.18ScalaralaQoSClassifyDscpread-writecurrentDSCP value to submit when testing classifier.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.19ScalaralaQoSClassifyIpProtocolread-writecurrentIP protocol value to submit when testing classifier.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.20ScalaralaQoSClassifySourceIpPortread-writecurrentSource IP port to submit when testing classifier.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.21ScalaralaQoSClassifyDestinationIpPortread-writecurrentDestination IP port to submit when testing classifier.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.22ScalaralaQoSClassifyExecuteread-writecurrentWriting to this field tells QoS to run the classifier on the current packet headers. The classifier stores the results in result fields. The next 'set' to the …
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.23ScalaralaQoSClassifyL2SourceResultRuleread-onlycurrentMatching rule for L2 (source)
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.24ScalaralaQoSClassifyL2SourceResultDispositionread-onlycurrentResult disposition for L2 (source)
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.25ScalaralaQoSClassifyL2DestinationResultRuleread-onlycurrentMatching rule for L2 (destination)
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.26ScalaralaQoSClassifyL2DestinationResultDispositionread-onlycurrentResult disposition for L2 (destination)
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.27ScalaralaQoSClassifyL3ResultRuleread-onlycurrentMatching rule for L3
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.28ScalaralaQoSClassifyL3ResultDispositionread-onlycurrentResult disposition for L3
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.29ScalaralaQoSClassifyIGMPResultRuleread-onlycurrentMatching rule for IGMP request
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.30ScalaralaQoSClassifyIGMPResultDispositionread-onlycurrentResult disposition for IGMP
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.31ScalaralaQoSClassifyMulticastResultRuleread-onlycurrentMatching rule for multicast
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.34.32ScalaralaQoSClassifyMulticastResultDispositionread-onlycurrentResult disposition for multicast
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.35TablealaQoSSlotProtocolTablenot-accessiblecurrentTable of QoS SlotProtocol definitions
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.35.1RowalaQoSSlotProtocolEntrynot-accessiblecurrentDefinition of QoS SlotProtocol
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.35.1.1ColumnalaQoSSlotProtocolIdnot-accessiblecurrentUsed on high density module classification in the MAC. This is the protocol ID used between the CAM and priority descriptors.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.35.1.2ColumnalaQoSSlotProtocolEthertyperead-createcurrentUsed on high density module classification in the MAC. This is the Ethernet type used between the CAM for classification.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.35.1.3ColumnalaQoSSlotProtocolDsapread-createcurrentUsed on high density module classification in the MAC. This is the destination SAP in an 802.3 packet.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.35.1.4ColumnalaQoSSlotProtocolSsapread-createcurrentUsed on high density module classification in the MAC. This is the source SAP in an 802.3 packet.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.35.1.5ColumnalaQoSSlotProtocol8023Enabledread-createcurrentUsed on high density module classification in the MAC. This will enable 802.3 checking on the CAM entry.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.35.1.6ColumnalaQoSSlotProtocolTyperead-createcurrentUsed on high density module classification in the MAC. This positions the CAM entry in the list. Priority will put the entries in the front of the CAM, giving …
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.35.1.7ColumnalaQoSSlotProtocolRowStatusread-createcurrentUsed to create/delete slot protoocols according to the RowStatus convention
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36TablealaQoSPortProtocolTablenot-accessiblecurrentTable of QoS PortProtocol definitions
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1RowalaQoSPortProtocolEntrynot-accessiblecurrentDefinition of QoS PortProtocol
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1.1ColumnalaQoSPortProtocolIdnot-accessiblecurrentUsed on high density module classification in the MAC. This is the protocol id that needs to be changed.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1.2ColumnalaQoSPortProtocolClassificationread-createcurrentUsed on high density module classification in the MAC. This determines what type of classification is used to find priority.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1.3ColumnalaQoSPortProtocolPriorityP0read-createcurrentUsed on high density module classification in the MAC. This is the new priority for P0 to be mapped to.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1.4ColumnalaQoSPortProtocolPriorityP1read-createcurrentUsed on high density module classification in the MAC. This is the new priority for P1 to be mapped to.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1.5ColumnalaQoSPortProtocolPriorityP2read-createcurrentUsed on high density module classification in the MAC. This is the new priority for P2 to be mapped to.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1.6ColumnalaQoSPortProtocolPriorityP3read-createcurrentUsed on high density module classification in the MAC. This is the new priority for P3 to be mapped to.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1.7ColumnalaQoSPortProtocolPriorityP4read-createcurrentUsed on high density module classification in the MAC. This is the new priority for P4 to be mapped to.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1.8ColumnalaQoSPortProtocolPriorityP5read-createcurrentUsed on high density module classification in the MAC. This is the new priority for P5 to be mapped to.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1.9ColumnalaQoSPortProtocolPriorityP6read-createcurrentUsed on high density module classification in the MAC. This is the new priority for P6 to be mapped to.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1.10ColumnalaQoSPortProtocolPriorityP7read-createcurrentUsed on high density module classification in the MAC. This is the new priority for P7 to be mapped to.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.36.1.11ColumnalaQoSPortProtocolRowStatusread-createcurrentUsed to create/delete rows according to RowStatus convention
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.37TablealaQoSSlotDscpTablenot-accessiblecurrentTable of QoS SlotDscp definitions
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.37.1RowalaQoSSlotDscpEntrynot-accessiblecurrentDefinition of QoS SlotDscp
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.37.1.1ColumnalaQoSSlotDscpIndexnot-accessiblecurrentUsed on high density module classification in the MAC This is the index into the DSCP table to access.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.37.1.2ColumnalaQoSSlotDscpPriorityread-createcurrentUsed on high density module classification in the MAC. This is the priority of the index of the DSCP table.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38TablealaQoSSlotPcamTablenot-accessiblecurrentTable of QoS SlotPcam definitions
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1RowalaQoSSlotPcamEntrynot-accessiblecurrentDefinition of QoS SlotPcam
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1.1ColumnalaQoSSlotPcamIdnot-accessiblecurrentUsed on high density module classification in the MAC. This is the index used in the PCAM.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1.2ColumnalaQoSSlotPcamEthertyperead-onlycurrentUsed on high density module classification in the MAC. This is the Ethernet type in the CAM.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1.3ColumnalaQoSSlotPcamDsapread-onlycurrentUsed on high density module classification in the MAC. This is the destination SAP in an 802.3 packet.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1.4ColumnalaQoSSlotPcamSsapread-onlycurrentUsed on high density module classification in the MAC. This is the source SAP in an 802.3 packet.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1.5ColumnalaQoSSlotPcam8023Enabledread-onlycurrentUsed on high density module classification in the MAC. This will enable 802.3 checking on the CAM entry.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1.6ColumnalaQoSSlotPcamProtocolNumberread-onlycurrentUsed on high density module classification in the MAC. This identifies the protocol number of the CAM entry.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1.7ColumnalaQoSSlotPcamEnableEntryread-onlycurrentUsed on high density module to enable the pcam entry.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1.8ColumnalaQoSSlotPcamEnable8023read-onlycurrentUsed on high density module to indiciate if 802.3 is enabled in the pcam entry.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1.9ColumnalaQoSSlotPcamEnableDsapread-onlycurrentUsed on high density module to indiciate if DSAP is enabled in the pcam entry.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1.10ColumnalaQoSSlotPcamEnableSsapread-onlycurrentUsed on high density module to indiciate if SSAP is enabled in the pcam entry.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.38.1.11ColumnalaQoSSlotPcamEnableEthertyperead-onlycurrentUsed on high density module to indiciate if Ethertype is enabled in the pcam entry.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39TablealaQoSPortPdiTablenot-accessiblecurrentTable of QoS PortPdi definitions
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39.1RowalaQoSPortPdiEntrynot-accessiblecurrentDefinition of QoS PortPdi
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39.1.1ColumnalaQoSPortPdiIdnot-accessiblecurrentUsed on high density module classification in the MAC. This is the index used in the PDI.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39.1.2ColumnalaQoSPortPdiPriorityTyperead-onlycurrentUsed on high density module classification in the MAC. This is the classification type on the port.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39.1.3ColumnalaQoSPortPdiPriorityP0read-onlycurrentUsed on high density module classification in the MAC. This is the internal priority mapping for a P0 packet.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39.1.4ColumnalaQoSPortPdiPriorityP1read-onlycurrentUsed on high density module classification in the MAC. This is the internal priority mapping for a P1 packet.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39.1.5ColumnalaQoSPortPdiPriorityP2read-onlycurrentUsed on high density module classification in the MAC. This is the internal priority mapping for a P2 packet.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39.1.6ColumnalaQoSPortPdiPriorityP3read-onlycurrentUsed on high density module classification in the MAC. This is the internal priority mapping for a P3 packet.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39.1.7ColumnalaQoSPortPdiPriorityP4read-onlycurrentUsed on high density module classification in the MAC. This is the internal priority mapping for a P4 packet.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39.1.8ColumnalaQoSPortPdiPriorityP5read-onlycurrentUsed on high density module classification in the MAC. This is the internal priority mapping for a P5 packet.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39.1.9ColumnalaQoSPortPdiPriorityP6read-onlycurrentUsed on high density module classification in the MAC. This is the internal priority mapping for a P6 packet.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.39.1.10ColumnalaQoSPortPdiPriorityP7read-onlycurrentUsed on high density module classification in the MAC. This is the internal priority mapping for a P7 packet.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40TablealaQoSValidityPeriodTablenot-accessiblecurrentTable of QoS ValidityPeriod definitions
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1RowalaQoSValidityPeriodEntrynot-accessiblecurrentDefinition of QoS ValidityPeriod
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.1ColumnalaQoSValidityPeriodNamenot-accessiblecurrentName of validity period
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.2ColumnalaQoSValidityPeriodSourceread-createcurrentWhat entity created the validity period.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.3ColumnalaQoSValidityPeriodDaysread-createcurrentBitfield for each day of the week this validity period is active. Monday is least significant, Sunday is most significant.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.4ColumnalaQoSValidityPeriodDaysStatusread-createcurrentStatus field indicating whether the validity period has specific active days of the month.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.5ColumnalaQoSValidityPeriodMonthsread-createcurrentBitfield for each month this validity period is active. January is least significant. Decemeber is most significant.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.6ColumnalaQoSValidityPeriodMonthsStatusread-createcurrentStatus field indicating whether the validity period has specific active days of the week.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.7ColumnalaQoSValidityPeriodHourread-createcurrentTime of day this period becomes active. Format is 'hh:mm'
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.8ColumnalaQoSValidityPeriodHourStatusread-createcurrentStatus field indicating whether the validity period has specific active hours of the day.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.9ColumnalaQoSValidityPeriodEndHourread-createcurrentTime of day this period becomes inactive. Format is 'hh:mm'
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.10ColumnalaQoSValidityPeriodIntervalread-createcurrentDate/time when the validity period begins. Format is 'mm/dd/yyyy hh:mm'
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.11ColumnalaQoSValidityPeriodIntervalStatusread-createcurrentStatus field indicating whether the validity period has a specific active date-time interval.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.12ColumnalaQoSValidityPeriodEndIntervalread-createcurrentDate/time when the validity period ends. Format is 'mm/dd/yyyy hh:mm'
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.40.1.13ColumnalaQoSValidityPeriodRowStatusread-createcurrentUsed to create/delete validity periods according to the RowStatus convention
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41TablealaQoSAppliedValidityPeriodTablenot-accessiblecurrentTable of QoS AppliedValidityPeriod definitions
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1RowalaQoSAppliedValidityPeriodEntrynot-accessiblecurrentDefinition of QoS AppliedValidityPeriod
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.1ColumnalaQoSAppliedValidityPeriodNamenot-accessiblecurrentName of validity period
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.2ColumnalaQoSAppliedValidityPeriodSourceread-onlycurrentWhat entity created the validity period.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.3ColumnalaQoSAppliedValidityPeriodDaysread-onlycurrentBitfield for each day of the week this validity period is active. Monday is least significant, Sunday is most significant.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.4ColumnalaQoSAppliedValidityPeriodDaysStatusread-onlycurrentStatus field indicating whether the validity period has specific active days of the month.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.5ColumnalaQoSAppliedValidityPeriodMonthsread-onlycurrentBitfield for each month this validity period is active. January is least significant. Decemeber is most significant.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.6ColumnalaQoSAppliedValidityPeriodMonthsStatusread-onlycurrentStatus field indicating whether the validity period has specific active days of the week.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.7ColumnalaQoSAppliedValidityPeriodHourread-onlycurrentTime of day this period becomes active. Format is 'hh:mm'
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.8ColumnalaQoSAppliedValidityPeriodHourStatusread-onlycurrentStatus field indicating whether the validity period has specific active hours of the day.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.9ColumnalaQoSAppliedValidityPeriodEndHourread-onlycurrentTime of day this period becomes inactive. Format is 'hh:mm'
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.10ColumnalaQoSAppliedValidityPeriodIntervalread-onlycurrentDate/time when the validity period begins. Format is 'mm/dd/yyyy hh:mm'
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.11ColumnalaQoSAppliedValidityPeriodIntervalStatusread-onlycurrentStatus field indicating whether the validity period has a specific active date-time interval.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.12ColumnalaQoSAppliedValidityPeriodEndIntervalread-onlycurrentDate/time when the validity period ends. Format is 'mm/dd/yyyy hh:mm'
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.41.1.13ColumnalaQoSAppliedValidityPeriodRowStatusread-onlycurrentUsed to create/delete validity periods according to the RowStatus convention
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.42TablealaQoSImportTablenot-accessiblecurrentTable of QoS Import definitions
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.42.1RowalaQoSImportEntrynot-accessiblecurrentDefinition of QoS Import
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.42.1.1ColumnalaQoSImportIndexnot-accessiblecurrentIndex of entry in import list
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.42.1.2ColumnalaQoSImportTextnot-accessiblecurrentText or filename to import
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.42.1.3ColumnalaQoSImportPrecedenceread-createcurrentPrecedence to use for policies imported from file
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.42.1.4ColumnalaQoSImportPrefixread-createcurrentPrefix for policy names that are imported
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.42.1.5ColumnalaQoSImportSlotread-createcurrentSlot on which to apply imported policy(s)
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.42.1.6ColumnalaQoSImportPortread-createcurrentStarting port on which to apply imported policy(s)
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.42.1.7ColumnalaQoSImportPortendread-createcurrentEnding port on which to apply imported policy(s)
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.42.1.8ColumnalaQoSImportPortgroupread-createcurrentPortgroup on which to apply imported policy(s)
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.42.1.9ColumnalaQoSImportRowStatusread-createcurrentUsed to create/delete imports according to the RowStatus convention
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.43TablealaQoSAppliedImportTablenot-accessiblecurrentTable of QoS AppliedImport definitions
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.43.1RowalaQoSAppliedImportEntrynot-accessiblecurrentDefinition of QoS AppliedImport
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.43.1.1ColumnalaQoSAppliedImportIndexnot-accessiblecurrentIndex of entry in import list
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.43.1.2ColumnalaQoSAppliedImportTextnot-accessiblecurrentText or filename to import
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.43.1.3ColumnalaQoSAppliedImportPrecedenceread-onlycurrentPrecedence to use for policies imported from file
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.43.1.4ColumnalaQoSAppliedImportPrefixread-onlycurrentPrefix for policy names that are imported
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.43.1.5ColumnalaQoSAppliedImportSlotread-onlycurrentSlot on which to apply imported policy(s)
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.43.1.6ColumnalaQoSAppliedImportPortread-onlycurrentStarting port on which to apply imported policy(s)
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.43.1.7ColumnalaQoSAppliedImportPortendread-onlycurrentEnding port on which to apply imported policy(s)
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.43.1.8ColumnalaQoSAppliedImportPortgroupread-onlycurrentPortgroup on which to apply imported policy(s)
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.43.1.9ColumnalaQoSAppliedImportRowStatusread-onlycurrentUsed to create/delete imports according to the RowStatus convention
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.44TablealaQoSRuleGroupsTablenot-accessiblecurrentTable of QoS RuleGroups definitions
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.44.1RowalaQoSRuleGroupsEntrynot-accessiblecurrentDefinition of QoS RuleGroups
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.44.1.1ColumnalaQoSRuleGroupsNamenot-accessiblecurrentName of rule group
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.44.1.2ColumnalaQoSRuleGroupsSourceread-createcurrentWhat entity created the rule group.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.44.1.3ColumnalaQoSRuleGroupsTyperead-createcurrentType of rule group.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.44.1.4ColumnalaQoSRuleGroupsEnabledread-createcurrentIs this rule grop enabled or not
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.44.1.5ColumnalaQoSRuleGroupsStatusread-createcurrentUsed to create/delete rule groups according to the RowStatus convention
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.45TablealaQoSAppliedRuleGroupsTablenot-accessiblecurrentTable of QoS AppliedRuleGroups definitions
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.45.1RowalaQoSAppliedRuleGroupsEntrynot-accessiblecurrentDefinition of QoS AppliedRuleGroups
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.45.1.1ColumnalaQoSAppliedRuleGroupsNamenot-accessiblecurrentName of rule group
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.45.1.2ColumnalaQoSAppliedRuleGroupsSourceread-createcurrentWhat entity created the service group.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.45.1.3ColumnalaQoSAppliedRuleGroupsTyperead-onlycurrentWhat entity created the rule group.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.45.1.4ColumnalaQoSAppliedRuleGroupsEnabledread-createcurrentIs this rule grop enabled or not
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.45.1.5ColumnalaQoSAppliedRuleGroupsStatusread-onlycurrentUsed to create/delete rule groups according to the RowStatus convention
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.46TablealaQoSRuleGroupTablenot-accessiblecurrentTable of QoS RuleGroup definitions
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.46.1RowalaQoSRuleGroupEntrynot-accessiblecurrentDefinition of QoS RuleGroup
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.46.1.1ColumnalaQoSRuleGroupRuleNamenot-accessiblecurrentName of rule in rule group entry
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.46.1.2ColumnalaQoSRuleGroupMatchesread-onlycurrentNumber of times this rule has been matched.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.46.1.3ColumnalaQoSRuleGroupCountTyperead-createcurrentWhich rule statistics counters to update if not all are available
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.46.1.4ColumnalaQoSRuleGroupPacketCountread-onlycurrentCounter for packets patching this rule
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.46.1.5ColumnalaQoSRuleGroupByteCountread-onlycurrentCounter for bytes matching this rule
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.46.1.6ColumnalaQoSRuleGroupStatusread-createcurrentUsed to create/delete rule group entries according to the RowStatus convention
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.46.1.7ColumnalaQoSRuleGroupPacketRateread-onlycurrentPackets mathcing the rule per second .
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.46.1.8ColumnalaQoSRuleGroupBitRateread-onlycurrentBytes mathcing the rule per second .
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.46.1.9ColumnalaQoSRuleGroupAccPacketCountread-onlycurrentCounter for packets matching this rule
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.46.1.10ColumnalaQoSRuleGroupAccByteCountread-onlycurrentCounter for bytes matching this rule
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47TablealaQoSAppliedRuleGroupTablenot-accessiblecurrentTable of QoS AppliedRuleGroup definitions
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1RowalaQoSAppliedRuleGroupEntrynot-accessiblecurrentDefinition of QoS AppliedRuleGroup
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.1ColumnalaQoSAppliedRuleGroupRuleNamenot-accessiblecurrentName of rule in rule group entry
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.2ColumnalaQoSAppliedRuleGroupMatchesread-onlycurrentNumber of times this rule has been matched.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.3ColumnalaQoSAppliedRuleGroupCountTyperead-createcurrentWhich rule statistics counters to update if not all are available
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.4ColumnalaQoSAppliedRuleGroupPacketCountread-onlycurrentCounter for packets patching this rule
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.5ColumnalaQoSAppliedRuleGroupByteCountread-onlycurrentCounter for bytes matching this rule
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.6ColumnalaQoSAppliedRuleGroupStatusread-onlycurrentUsed to create/delete rule group entries according to the RowStatus convention
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.7ColumnalaQosAppliedRuleGroupPacketRateread-onlycurrentShows the packet rate for policy list
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.8ColumnalaQosAppliedRuleGroupBitRateread-onlycurrentShows the bit rate for policy list
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.9ColumnalaQoSAppliedRuleGroupAccPacketCountread-onlycurrentCounter for packets matching this rule
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.47.1.10ColumnalaQoSAppliedRuleGroupAccByteCountread-onlycurrentCounter for bytes matching this rule
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.48TablealaQoSVlanGroupsTablenot-accessiblecurrentTable of QoS Vlan Groups definitions
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.48.1RowalaQoSVlanGroupsEntrynot-accessiblecurrentDefinition of QoS Vlan Groups
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.48.1.1ColumnalaQoSVlanGroupsNamenot-accessiblecurrentName of Vlan group
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.48.1.2ColumnalaQoSVlanGroupsSourceread-createcurrentWhat entity created the Vlan group.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.48.1.3ColumnalaQoSVlanGroupsStatusread-createcurrentUsed to create/delete Vlan groups according to the RowStatus convention
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.49TablealaQoSAppliedVlanGroupsTablenot-accessiblecurrentTable of QoS Applied Vlan Groups definitions
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.49.1RowalaQoSAppliedVlanGroupsEntrynot-accessiblecurrentDefinition of QoS Applied Vlan Groups
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.49.1.1ColumnalaQoSAppliedVlanGroupsNamenot-accessiblecurrentName of Applied Vlan group
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.49.1.2ColumnalaQoSAppliedVlanGroupsSourceread-createcurrentWhat entity created the Vlan group.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.49.1.3ColumnalaQoSAppliedVlanGroupsStatusread-createcurrentUsed to create/delete Vlan groups according to the RowStatus convention
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.50TablealaQoSVlanGroupTablenot-accessiblecurrentTable of QoS Vlan Group definitions
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.50.1RowalaQoSVlanGroupEntrynot-accessiblecurrentDefinition of QoS Vlan Group
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.50.1.1ColumnalaQoSVlanGroupVlannot-accessiblecurrentVlan range start for vlan group entry
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.50.1.2ColumnalaQoSVlanGroupVlanEndnot-accessiblecurrentVlan range end for vlan group entry
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.50.1.3ColumnalaQoSVlanGroupStatusread-createcurrentUsed to create/delete vlan group entries according to the RowStatus convention
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.51TablealaQoSAppliedVlanGroupTablenot-accessiblecurrentTable of QoS Applied Vlan Group definitions
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.51.1RowalaQoSAppliedVlanGroupEntrynot-accessiblecurrentDefinition of QoS Applied Vlan Group
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.51.1.1ColumnalaQoSAppliedVlanGroupVlannot-accessiblecurrentVlan range start for vlan group entry
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.51.1.2ColumnalaQoSAppliedVlanGroupVlanEndnot-accessiblecurrentVlan range end for vlan group entry
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.51.1.3ColumnalaQoSAppliedVlanGroupStatusread-createcurrentUsed to create/delete vlan group entries according to the RowStatus convention
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.52TablealaQoSHwLoopbackProfileTablenot-accessiblecurrentTable of QoS Hw Loopback Profiles
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.52.1RowalaQoSHwLoopbackProfileEntrynot-accessiblecurrentDefinition of QoS Hw Loopback Profiles
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.52.1.1ColumnalaQoSHwLoopbackProfileNamenot-accessiblecurrentName of Profile Name
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.52.1.2ColumnalaQoSHwLoopbackSourceMacread-createcurrentSource MAC address to use for Hardware Loopback profile configuration
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.52.1.3ColumnalaQoSHwLoopbackDestinationMacread-createcurrentDestination MAC address to use for Hardware Loopback profile configuration
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.52.1.4ColumnalaQoSHwLoopbackVlanread-createcurrentVlan used in Hardware Loopback Profile Config
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.52.1.5ColumnalaQoSHwLoopbackPortread-createcurrentLoopback Port ifindex used in Hardware Loopback Profile Config
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.52.1.6ColumnalaQoSHwLoopbackTyperead-createcurrentThe type of Hardware Profile Config, inward and outward
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.52.1.7ColumnalaQoSHwLoopbackProfileStatusread-createcurrentThe status of the Hardware Profile Config
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.52.1.8ColumnalaQoSHwLoopbackProfileRowStatusread-createcurrentUsed to create/delete the Profile Config
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.52.1.9ColumnalaQosHwLoopbackSapIdread-createcurrentA Number given to uniquely identify the SAP.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.53TablealaQoSQueueStatsTablenot-accessiblecurrentTable of QoS Queue Stats definitions
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.53.1RowalaQoSQueueStatsEntrynot-accessiblecurrentDefinition of QoS Queue Stats
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.53.1.1ColumnalaQoSQueueStatsIdnot-accessiblecurrentInternal queue identifier
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.53.1.2ColumnalaQoSQueueStatsSlotread-onlycurrentPhysical slot queue is destined to
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.53.1.3ColumnalaQoSQueueStatsPortread-onlycurrentPhysical port queue is destined to
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.53.1.4ColumnalaQoSQueueStatsTransmitQueueread-onlycurrentTransmit queue number
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.53.1.5ColumnalaQoSQueueStatsPriorityread-onlycurrentTransmit priority for the queue
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.53.1.6ColumnalaQoSQueueStatsPacketsSentread-onlycurrentNumber of packets sent through the queue
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.53.1.7ColumnalaQoSQueueStatsPacketsDroppedread-onlycurrentNumber of packets dropped trying to queue into this queue
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.53.1.8ColumnalaQoSQueueStatsBytesSentread-onlycurrentNumber of bytes sent through the queue
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.53.1.9ColumnalaQoSQueueStatsBytesDroppedread-onlycurrentNumber of bytes dropped trying to queue into this queue
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.53.1.10ColumnalaQoSQueueStatsRateSentread-onlycurrentRate(Mbits/sec) sent through the queue
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.53.1.11ColumnalaQoSQueueStatsRateDroppedread-onlycurrentRate(Mbits/sec) dropped trying to queue into this queue
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.54TablealaQoSExtendedRuleTablenot-accessiblecurrentTable of QoS Rule definitions for extending port group behavior on individual port basis or group basis
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.54.1RowalaQoSExtendedRuleEntrynot-accessiblecurrentDefinition of QoS Rule
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.54.1.1ColumnalaQoSExtendedRuleSlotnot-accessiblecurrentSlot on which rate-limit is enabled.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.54.1.2ColumnalaQoSExtendedRulePortnot-accessiblecurrentPort on which rate-limit is enabled.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.54.1.3ColumnalaQoSExtendedRuleMatchesread-onlycurrentNumber of times this rule has been matched.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.54.1.4ColumnalaQoSExtendedRulePacketCountread-onlycurrentCounter for packets matching this rule
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.54.1.5ColumnalaQoSExtendedRuleByteCountread-onlycurrentCounter for bytes matching this rule
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.54.1.6ColumnalaQoSExtendedRuleExcessPacketCountread-onlycurrentCounter for packets out of the bandwidth parameters
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.54.1.7ColumnalaQoSExtendedRuleExcessByteCountread-onlycurrentCounter for bytes out of the bandwidth parameters
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.54.1.8ColumnalaQoSExtendedRuleGreenCountread-onlycurrentCounter for the number of packets which are green compliant.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.54.1.9ColumnalaQoSExtendedRuleYellowCountread-onlycurrentCounter for the number of packets which are yellow compliant.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.54.1.10ColumnalaQoSExtendedRuleRedCountread-onlycurrentCounter for the number of packets which are red compliant.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.54.1.11ColumnalaQoSExtendedRuleNonGreenCountread-onlycurrentCounter for the number of packets which are non-green compliant.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.54.1.12ColumnalaQoSExtendedRuleNonRedCountread-onlycurrentCounter for the number of packets which are non-red compliant.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.55TablealaQoSDSCPTablenot-accessiblecurrentTable of QoS Condition definitions
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.55.1RowalaQoSDSCPEntrynot-accessiblecurrentDefinition of QoS DSCP
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.55.1.1ColumnalaQoSDSCPEntryNumbernot-accessiblecurrentDSCP Entry number for the traffic.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.55.1.2ColumnalaQoSDSCPPriorityread-createcurrentDSCP priority for the traffic.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.55.1.3ColumnalaQoSDSCPDropPrecedenceread-createcurrentDSCP drop precedence for the traffic.
1.3.6.1.4.1.6486.800.1.2.1.22.1.1.55.1.4ColumnalaQoSDSCPRowStatusread-createcurrentRowStatus entry for QoS DSCP.
1.3.6.1.4.1.6486.800.1.2.1.22.1.2IdentityalaQoSMIBConformancecurrentBranch for QoS Managed Conformance Information.
1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1IdentityalaQoSMIBGroupscurrentBranch for QoS Units of Conformance.
1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.1GroupalaQoSMIBRuleObjectscurrentCollections of objects providing information for Rules
1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.2GroupalaQoSMIBAppliedRuleObjectscurrentCollections of objects providing information for applied Rules
1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.3GroupalaQoSMIBConditionObjectscurrentCollections of objects providing information for Conditions
1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.4GroupalaQoSMIBAppliedConditionObjectscurrentCollections of objects providing information for applied Conditions
1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.5GroupalaQoSMIBServiceObjectscurrentCollections of objects providing information for Services
1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.6GroupalaQoSMIBAppliedServiceObjectscurrentCollections of objects providing information for applied Services
1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.7GroupalaQoSMIBServiceGroupsObjectscurrentCollections of objects providing information for ServiceGroupss
1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.8GroupalaQoSMIBAppliedServiceGroupsObjectscurrentCollections of objects providing information for applied ServiceGroupss
1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.9GroupalaQoSMIBServiceGroupObjectscurrentCollections of objects providing information for ServiceGroups
1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.10GroupalaQoSMIBAppliedServiceGroupObjectscurrentCollections of objects providing information for applied ServiceGroups
1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.11GroupalaQoSMIBNetworkGroupsObjectscurrentCollections of objects providing information for NetworkGroupss
1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.12GroupalaQoSMIBAppliedNetworkGroupsObjectscurrentCollections of objects providing information for applied NetworkGroupss
1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.13GroupalaQoSMIBNetworkGroupObjectscurrentCollections of objects providing information for NetworkGroups
1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.14GroupalaQoSMIBAppliedNetworkGroupObjectscurrentCollections of objects providing information for applied NetworkGroups
1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.15GroupalaQoSMIBMACGroupsObjectscurrentCollections of objects providing information for MACGroupss
1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.16GroupalaQoSMIBAppliedMACGroupsObjectscurrentCollections of objects providing information for applied MACGroupss
1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.17GroupalaQoSMIBMACGroupObjectscurrentCollections of objects providing information for MACGroups
1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.18GroupalaQoSMIBAppliedMACGroupObjectscurrentCollections of objects providing information for applied MACGroups
1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.19GroupalaQoSMIBPortGroupsObjectscurrentCollections of objects providing information for PortGroupss
1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.20GroupalaQoSMIBAppliedPortGroupsObjectscurrentCollections of objects providing information for applied PortGroupss
1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.21GroupalaQoSMIBPortGroupObjectscurrentCollections of objects providing information for PortGroups
1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.22GroupalaQoSMIBAppliedPortGroupObjectscurrentCollections of objects providing information for applied PortGroups
1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.23GroupalaQoSMIBMapGroupsObjectscurrentCollections of objects providing information for MapGroupss
1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.24GroupalaQoSMIBAppliedMapGroupsObjectscurrentCollections of objects providing information for applied MapGroupss
1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.25GroupalaQoSMIBMapGroupObjectscurrentCollections of objects providing information for MapGroups
1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.26GroupalaQoSMIBAppliedMapGroupObjectscurrentCollections of objects providing information for applied MapGroups
1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.27GroupalaQoSMIBActionObjectscurrentCollections of objects providing information for Actions
1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.28GroupalaQoSMIBAppliedActionObjectscurrentCollections of objects providing information for applied Actions
1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.29GroupalaQoSMIBPortObjectscurrentCollections of objects providing information for Ports
1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.30GroupalaQoSMIBConfigObjectscurrentCollections of objects providing information for Configs
1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.31GroupalaQoSMIBStatsObjectscurrentCollections of objects providing information for Statss
1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.32GroupalaQoSMIBQueueObjectscurrentCollections of objects providing information for Queues
1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.33GroupalaQoSMIBSlotObjectscurrentCollections of objects providing information for Slots
1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.34GroupalaQoSMIBClassifyObjectscurrentCollections of objects providing information for Classifys
1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.35GroupalaQoSMIBRuleGroupsObjectscurrentCollections of objects providing information for RuleGroupss
1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.36GroupalaQoSMIBAppliedRuleGroupsObjectscurrentCollections of objects providing information for applied RuleGroupss
1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.37GroupalaQoSMIBRuleGroupObjectscurrentCollections of objects providing information for RuleGroups
1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.38GroupalaQoSMIBAppliedRuleGroupObjectscurrentCollections of objects providing information for applied RuleGroups
1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.39GroupalaQoSVlanGroupsObjectscurrentCollections of objects providing QoS Vlan Groups definitions.
1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.40GroupalaQoSAppliedVlanGroupsObjectscurrentCollections of objects providing applied QoS Vlan Groups definitions.
1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.41GroupalaQoSVlanGroupObjectscurrentCollections of objects providing QoS Vlan Groups definitions.
1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.42GroupalaQoSAppliedVlanGroupObjectscurrentCollections of objects providing applied QoS Vlan Groups definitions.
1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.43GroupalaQoSMIBHwLoopBackProfileObjectscurrentCollections of objects providing information for Hardware Loopback
1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.44GroupalQosQueueStatsGroupObjectscurrentCollection of objects providing statistics information for egress queues.
1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.45GroupalaQoSAppliedImportGroupcurrentDefinition of QoS Applied Import.
1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.46GroupalaQoSAppliedValidityPeriodGroupcurrentDefinition of QoS Applied Import.
1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.47GroupalaQoSImportGroupcurrentDefinition of QoS Import.
1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.48GroupalaQoSPortPdiGroupcurrentDefinition of QoS PortPdi.
1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.49GroupalaQoSPortPriorityGroupcurrentDefinition of QoS Port Priority.
1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.50GroupalaQoSSlotDscpGroupcurrentDefinition of QoS SlotDscp.
1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.51GroupalaQoSSlotPcamGroupcurrentDefinition of QoS SlotDscp.
1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.52GroupalaQoSSlotProtocolGroupcurrentDefinition of QoS SlotDscp.
1.3.6.1.4.1.6486.800.1.2.1.22.1.2.1.53GroupalaQoSValidityPeriodGroupcurrentDefinition of QoS SlotDscp.
1.3.6.1.4.1.6486.800.1.2.1.22.1.2.2IdentityalaQoSMIBCompliancescurrentBranch for QoS Compliance Statements.
1.3.6.1.4.1.6486.800.1.2.1.22.1.2.2.1CompliancealaQoSMIBCompliancecurrentCompliance statement for QoS.
MIB Viewer