ALCATEL-IND1-STACK-MANAGER-MIB
105 objects
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line Stack Manager The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
Imported Objects
| ALCATEL-IND1-BASE | softentIND1StackMgr |
| IF-MIB | InterfaceIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6486.800.1.2.1.24.1 | IdentityalcatelIND1StackMgrMIB | This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey P… | ||
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.1 | NodealcatelIND1StackMgrMIBObjects | |||
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.1.1 | TablealaStackMgrChassisTable | not-accessible | current | Maintains a list with information about all the switches that participate on the stack herein refered to as chassis. |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.1.1.1 | RowalaStackMgrChassisEntry | not-accessible | current | Each entry corresponds to a chassis and lists its role and neighbors in the stack. |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.1.1.1.1 | ColumnalaStackMgrSlotNINumber | read-only | current | Numbers allocated for the stack NIs as follows: - 0: invalid slot number - 1..8: valid and assigned slot numbers corresponding to values from the entPhysicalTa… |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.1.1.1.2 | ColumnalaStackMgrSlotCMMNumber | read-only | current | The numbers allocated for the stack CMMs are from 65..72 or 0 if not present |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.1.1.1.3 | ColumnalaStackMgrChasRole | read-only | current | The current role of the chassis as follows: - unassigned(0), - primary(1), - secondary(2), - idle(3), - standalone(4), - passthrough(5). |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.1.1.1.4 | ColumnalaStackMgrLocalLinkStateA | read-only | current | 1 indicates that the stacking link A is up, which means it knows its adjacent node. 2 indicates that the stacking link A is inactive and RemoteNISlotA and Remo… |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.1.1.1.5 | ColumnalaStackMgrRemoteNISlotA | read-only | current | This is the remote NI slot seen by the current NI through its stacking link A. The numbers allocated for the Stack NIs are 1..8, 1001..1008 or 0 if not present |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.1.1.1.6 | ColumnalaStackMgrRemoteLinkA | read-only | current | This is the remote link of the remote NI slot seen through the stacking link A. The values for these ports are platform dependent. The possible values are: - 0… |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.1.1.1.7 | ColumnalaStackMgrLocalLinkStateB | read-only | current | 1 indicates that the stacking link B is up, which means it knows its adjacent node. 2 indicates that the stacking link B is inactive and RemoteNISlotB and Remo… |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.1.1.1.8 | ColumnalaStackMgrRemoteNISlotB | read-only | current | This is the remote NI slot seen by the current NI through its stacking link B. The numbers allocated for the Stack NIs are 1..8, 1001..1008 or 0 if not present |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.1.1.1.9 | ColumnalaStackMgrRemoteLinkB | read-only | current | This is the remote link of the remote NI slot seen through the stacking link B. The values for these ports are platform dependent. The possible values are: - 0… |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.1.1.1.10 | ColumnalaStackMgrChasState | read-only | current | This current state of the chassis: running (1), duplicateSlot (2), clearedSlot (3), outOfSlots (4), outOfTokens (5), badMix (6) or inc-Lic(7). |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.1.1.1.11 | ColumnalaStackMgrSavedSlotNINumber | read-write | current | Slot number stored in persistent memory that will be in effect if the stack element reboots. Only slot numbers in the range 1..8 are allowed. |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.1.1.1.12 | ColumnalaStackMgrCommandAction | read-write | current | This object identifies which of the following Actions is to be performed: clearSlot(1), clearSlotImmediately (2) or reload (3). Whenever a new command is recei… |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.1.1.1.13 | ColumnalaStackMgrCommandStatus | read-only | current | This object provides the current status of last command received from the management as follows: notSignificant(0), clearSlotInProgress(1), clearSlotFailed(2),… |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.1.1.1.14 | ColumnalaStackMgrOperStackingMode | read-only | current | This object specifies the current running mode of the switch. |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.1.1.1.15 | ColumnalaStackMgrAdminStackingMode | read-write | current | This object specifies the stack mode atained on reload. |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.1.2 | TablealaStackMgrStatsTable | not-accessible | current | Stack port statistics table. |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.1.2.1 | RowalaStackMgrStatsEntry | not-accessible | current | Stats table for stackable ports. |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.1.2.1.1 | ColumnalaStackMgrStatLinkNumber | read-only | current | Local link refers to the stacking port on each slot. The values of these ports are: - linkA: 25, 27, 29, 31 or 51 - linkB: 26, 28, 30, 32 or 52. |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.1.2.1.2 | ColumnalaStackMgrStatPktsRx | read-only | current | The total number of packets recieved on this port. |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.1.2.1.3 | ColumnalaStackMgrStatPktsTx | read-only | current | The total number of packets transmitted on this port. |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.1.2.1.4 | ColumnalaStackMgrStatErrorsRx | read-only | current | The total number of packets in error - received on the port. |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.1.2.1.5 | ColumnalaStackMgrStatErrorsTx | read-only | current | The total number of packets in error - transmitted on the port. |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.1.2.1.6 | ColumnalaStackMgrStatDelayFromLastMsg | read-only | current | The delay since the last message. |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.1.3 | ScalaralaStackMgrStackStatus | read-only | current | Indicates whether the Stack is or not in Loop. |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.1.4 | ScalaralaStackMgrTokensUsed | read-only | current | Indicates the total number of tokens that have been allocated to all the elements in the stack. |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.1.5 | ScalaralaStackMgrTokensAvailable | read-only | current | Indicates the total number of tokens that are still available and that potentially may be allocated to elements of the stack. |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.1.6 | TablealaStackMgrStaticRouteTable | not-accessible | current | Maintains a list with information about all the static routes in the stack. |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.1.6.1 | RowalaStackMgrStaticRouteEntry | not-accessible | current | Each entry corresponds to a static route and lists its source and destination in the stack. |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.1.6.1.1 | ColumnalaStackMgrStaticRouteSrcStartIf | not-accessible | current | The physical identification number for start source range of the static route |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.1.6.1.2 | ColumnalaStackMgrStaticRouteSrcEndIf | not-accessible | current | The physical identification number for end source range of the static route |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.1.6.1.3 | ColumnalaStackMgrStaticRouteDstStartIf | not-accessible | current | The physical identification number for start destination range of the static route |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.1.6.1.4 | ColumnalaStackMgrStaticRouteDstEndIf | not-accessible | current | The physical identification number for end destination range of the static route |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.1.6.1.5 | ColumnalaStackMgrStaticRoutePort | read-create | current | This is the stack link to the destination NI slot . The values for these ports are platform dependent. The possible values are: - 0: not present - linkA: 25, 2… |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.1.6.1.6 | ColumnalaStackMgrStaticRoutePortState | read-only | current | 1 indicates that the static route stacking link is up . 2 indicates that the stacking link is inactive. |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.1.6.1.7 | ColumnalaStackMgrStaticRouteStatus | read-create | current | Whether this static route is enabled or disabled . |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.1.6.1.8 | ColumnalaStackMgrStaticRouteRowStatus | read-create | current | The status of this table entry. |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.1.7 | TablealaStackMgrStackModeTable | not-accessible | current | Maintains a list with information about the switch mode for OS6850/OS6850E devices. |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.1.7.1 | RowalaStackMgrStackModeEntry | not-accessible | current | Each entry corresponds to the switch mode for OS6850/OS6850E devices. |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.1.7.1.1 | ColumnalaStackMgrStackModeIndex | not-accessible | current | This object specifies the slot number of the NI. Numbers allocated for the stack NIs as follows: - 0: invalid slot number - 1..8: valid and assigned slot numbe… |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.1.7.1.2 | ColumnalaStackMgrAdminStackMode | read-write | current | This object specifies the mode of the switch on the next reboot. |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.1.7.1.3 | ColumnalaStackMgrOperStackMode | read-only | current | This object specifies the current running mode of the switch. |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.1.7.1.4 | ColumnalaStackMgrCmdAction | read-write | current | This object specifies reboot of switch. |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.1.8 | TablealaSSPStateTable | not-accessible | current | Maintains a list with information about SSP state of all the switches. |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.1.8.1 | RowalaSSPStateEntry | not-accessible | current | Each entry corresponds to a chassis and its SSP state. |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.1.8.1.1 | ColumnalaSSPTableSlotNINumber | read-only | current | Numbers allocated for the stack NIs as follows: - 0: invalid slot number - 1..8: valid and assigned slot numbers corresponding to values from the entPhysicalTa… |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.1.8.1.2 | ColumnalaSSPTableSspOpStatus | read-only | current | This indicates the Active/Protection state of the current slot. |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.1.9 | NodealaSSPHelperGlobalConfig | |||
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.1.9.1 | ScalaralaSspHelperStatus | read-write | current | Stack Split Protection Helper Status. This shall be enabled only after configuring at least one Helper Linkagg |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.1.10 | TablealaSspHelperqAggregateTable | not-accessible | current | This table lists the ssp helper enabled aggregate. |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.1.10.1 | RowalaSspHelperqAggregateEntry | not-accessible | current | An entry in ssp helper aggregate table. |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.1.10.1.1 | ColumnalaSspHelperAggregateId | read-only | current | The aggreagte id of the aggregate. |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.1.10.1.2 | ColumnalaSspHelperAggregateStatus | read-write | current | Helper status of the linkagg configured on DUT. |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.2 | NodealcatelIND1StackMgrMIBConformance | |||
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.2.1 | NodealcatelIND1StackMgrMIBGroups | |||
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.2.1.1 | GroupalaStackMgrCfgMgrGroup | current | A collection of objects providing information about the topology of the stack . | |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.2.1.2 | GroupalaStackMgrNotificationGroup | current | A collection of notifications for signaling Stack manager events. | |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.2.1.3 | GroupalaStackMgrStackModeGroup | current | A collection of objects providing information about the switch mode for OS6850/OS6850E devices. | |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.2.1.4 | GroupalaStackMgrTrapGroup | current | Stack Manager Trap Objects. | |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.2.1.5 | GroupalaStackMgrStatGroup | current | Stack Mgr Statistics. | |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.2.1.6 | GroupalaStackMgrStaticRouteGroup | current | Stack Static Route. | |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.2.1.7 | GroupalaStackMgrMIBObjectsGroup | current | Stack Mgr Global Objects. | |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.2.1.8 | NodealaSSPConfigInfo | |||
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.2.1.8.1 | ScalaralaSspConfigStatus | read-write | current | Stack Split Protection Status. By default it should be disabled. |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.2.1.8.2 | ScalaralaSspLinkaggId | read-write | current | Indicates the Linkagg ID assigned for SSP. |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.2.1.8.3 | ScalaralaSspGuardTimer | read-write | current | This indicates the timer value for how long the device has to wait before going to protection state if the stacking links are down and SSP is enabled. |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.2.1.8.4 | ScalaralaSspUpTime | read-only | current | This indicates the uptime of the Stack Split protection in timeticks. |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.2.1.8.5 | ScalaralaSspStateUpTime | read-only | current | This indicates the uptime of the protection state of the SSP in timeticks. |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.2.1.9 | GroupalaStackSplitProtectionGroup | current | A collection of object providing information about stack split protection protocol. | |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.2.2 | NodealcatelIND1StackMgrMIBCompliances | |||
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.2.2.1 | CompliancealcatelIND1StackMgrMIBCompliance | current | The compliance statement for device support of Stack Manager. | |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.3 | NodealcatelIND1StackMgrTrapObjects | |||
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.3.1 | ScalaralaStackMgrTrapLinkNumber | accessible-for-notify | current | Holds the link number, when the stack is not in loop. |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.3.2 | ScalaralaStackMgrPrimary | accessible-for-notify | current | Holds the slot number of the stack element that plays the role of Primary. |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.3.3 | ScalaralaStackMgrSecondary | accessible-for-notify | current | Holds the slot number of the stack element that plays the role of Secondary. |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.3.4 | ScalaralaStackMgrPrimaryLicense | accessible-for-notify | current | Holds the license type of of its own stack element . |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.4 | NodealaStackMgrTraps | |||
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.4.0.1 | NotificationalaStackMgrDuplicateSlotTrap | current | The element specified by alaStackMgrSlotNINumber has the same slot number of another element of the stack and it must relinquish its operational status because… | |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.4.0.2 | NotificationalaStackMgrNeighborChangeTrap | current | Indicates whether the stack is in loop or not. In case of no loop, alaStackMgrSlotNINumber and alaStackMgrTrapLinkNumber indicate where the Stack is broken | |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.4.0.3 | NotificationalaStackMgrRoleChangeTrap | current | Role Change Trap. Indicates that a new primary or secondary is elected. | |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.4.0.4 | NotificationalaStackMgrDuplicateRoleTrap | current | The element identified by alaStackMgrSlotNINumber detected the presence of two elements with the same primary or secondary role as specified by alaStackMgrChas… | |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.4.0.5 | NotificationalaStackMgrClearedSlotTrap | current | The element identified by alaStackMgrSlotNINumber will enter the pass through mode because its operational slot was cleared with immediate effect. | |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.4.0.6 | NotificationalaStackMgrOutOfSlotsTrap | current | One element of the stack will enter the pass through mode because there are no slot numbers available to be assigned to this element. | |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.4.0.7 | NotificationalaStackMgrOutOfTokensTrap | current | The element identified by alaStackMgrSlotNINumber will enter the pass through mode because there are no tokens available to be assigned to this element. | |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.4.0.8 | NotificationalaStackMgrOutOfPassThruSlotsTrap | current | There are no pass through slots available to be assigned to an element that is supposed to enter the pass through mode. | |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.4.0.9 | NotificationalaStackMgrBadMixTrap | current | The element identified by alaStackMgrSlotNINumber will enter the pass through mode because it is not compatible with the existing stack. | |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.4.0.10 | NotificationalaStackMgrIncompatibleLicenseTrap | current | The element identified by alaStackMgrSlotNINumber will enter the pass through mode because element license information is not same as primary element license i… | |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.4.0.11 | NotificationalaStackSplitProtectionTrap | current | The element identified by alaStackMgrSlotNINumber will enter into the SSP Protection state. | |
| 1.3.6.1.4.1.6486.800.1.2.1.24.1.4.0.12 | NotificationalaStackSplitRecoveryTrap | current | The element identified by alaStackMgrSlotNINumber will enter into the SSP Active state. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AlaSSPTableSlotNINumber | Integer32(0|1..8|255|1001..1008) | current | The numbers allocated for the stack NIs are as follows: - 0 = invalid slot number; - 1..8 = valid and assigned slot numbers corresponding values from the entPhysicalTable; - 1001..1008 = switches operating in pass throu… |
| AlaSSPTableSspOpStatus | INTEGER { none (0), active (1), protection (2), notinstack (3) } | current | This indicates the Active/Protection state of the current slot. |
| AlaStackMgrCommandAction | INTEGER { notSignificant(0), clearSlot(1), clearSlotImmediately(2), reloadAny(3), reloadPassThru(4) } | current | Identifies which of the following actions is to be performed: - notSiginificant(0) : no action, - clearSlot(1) : saved slot number will be removed from persistent database, - clearSlotImmediately : saved slot number wil… |
| AlaStackMgrCommandStatus | INTEGER { notSignificant(0), clearSlotInProgress(1), clearSlotFailed(2), clearSlotSuccess(3), setSlotInProgress(4), setSlotFailed(5), setSlotSuccess(6) } | current | Identifies the current status of the last action command received as follows: - notSignificant(0), - clearSlotInProgress(1), - clearSlotFailed(2), - clearSlotSuccess(3), - setSlotInProgress(4), - setSlotFailed(5), - set… |
| AlaStackMgrLicenseType | INTEGER { notSignificant(0), metro(1) } | current | Identifies installed license of a switch - notSignificant(0), - metro(1). |
| AlaStackMgrLinkNumber | INTEGER { linkA27(27), linkB28(28), linkA51(51), linkB52(52), linkA31(31), linkB32(32), linkA25(25), linkB26(26), linkA29(29), linkB30(30), linkA(1), linkB(2), linkA11(11), linkB12(12) } | current | Lists the port numbers that the stackable ports can hold. Also the values are the same as the one marked on the Stack chassis pannel. These values are hardware dependent as follows: - First generation stackable switches… |
| AlaStackMgrLinkStatus | INTEGER { up(1), down(2) } | current | Provides the logical stack link status. The logical link is considered operational if the physical link is operational and communication with the adjacent switch is active. The possible values are: - up(1), - down(2). |
| AlaStackMgrNINumber | INTEGER (0..1008) | current | The numbers allocated for the stack NIs are as follows: - 0 = invalid slot number; - 1..8 = valid and assigned slot numbers corresponding values from the entPhysicalTable; - 1001..1008 = switches operating in pass throu… |
| AlaStackMgrSlotRole | INTEGER { unassigned (0), primary (1), secondary (2), idle (3), standalone (4), passthrough (5) } | current | Indicates the role of each switch within the stack as follows: - unassigned(0), - primary(1), - secondary(2), - idle(3), - standalone(4), - passthrough(5) |
| AlaStackMgrSlotState | INTEGER { running (1), duplicateSlot (2), clearedSlot (3), outOfSlots (4), outOfTokens (5), badMix (6), inc-Lic (7) } | current | Current operational state of a stack element as follows: - running(1) : switch is fully operational, - duplicateSlot(2): switch operates in pass through mode due to slot duplication, - clearedSlot(3) : switch operates i… |
| AlaStackMgrStackingMode | INTEGER { stackable(1), standalone(2) } | current | Stacking mode, which specifies the ability of a switch to be part of a set of switches or virtual chassis: - stackable(1) :the switch may be stacked with other switches in the same virtual chassis. - standalone(2) :the … |
| AlaStackMgrStackMode | INTEGER { os6850 (1), os6850e(2) } | current | Switch Mode for OS6850 or OS6850E devices. In OS6850 mode, OS6850E switch will operate as OS6850. While stacking with OS6850, OS6850 mode should be set. |
| AlaStackMgrStackStatus | INTEGER { loop(1), noloop(2) } | current | Indicates whether the stack ring is or not in loop as follows: - loop(1), - noloop(2) |