ALCATEL-IND1-SYSTEM-MIB
204 objects
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line Proprietary System Subsystem. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
Imported Objects
| ALCATEL-IND1-BASE | hardentIND1System |
| IPV6-TC | Ipv6Address |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | IpAddress MODULE-IDENTITY OBJECT-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TEXTUAL-CONVENTION TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6486.800.1.1.1.2.1 | IdentityalcatelIND1SystemMIB | This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey P… | ||
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1 | IdentityalcatelIND1SystemMIBObjects | current | Branch For BOP Proprietary System Subsystem Managed Objects. | |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.1 | NodesystemMicrocode | |||
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.1.1 | TablesystemMicrocodeTable | not-accessible | current | This table contains one row per set of microcode objects. There is always at least one set of microcode objects for each CMM System Module |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.1.1.1 | RowsystemMicrocodeEntry | not-accessible | current | The Microcode information for this CMM |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.1.1.1.1 | ColumnsystemMicrocodeIndex | read-only | current | The index to the highest level of the microcode table. This level is organized by the directory being referenced. |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.1.2 | TablesystemMicrocodePackageTable | not-accessible | current | the microcode package table |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.1.2.1 | RowsystemMicrocodePackageEntry | not-accessible | current | a row in the microcode package table |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.1.2.1.1 | ColumnsystemMicrocodePackageIndex | read-only | current | The index to the package sub table in the microcode table |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.1.2.1.2 | ColumnsystemMicrocodePackageVersion | read-only | current | The version of the microcode package (Fos.img, Fbase.img, etc.) |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.1.2.1.3 | ColumnsystemMicrocodePackageName | read-only | current | The name of the microcode package |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.1.2.1.4 | ColumnsystemMicrocodePackageDescription | read-only | current | The description of the microcode package |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.1.2.1.5 | ColumnsystemMicrocodePackageStatus | read-only | current | The status of the microcode package |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.1.2.1.6 | ColumnsystemMicrocodePackageSize | read-only | current | The size of the microcode package |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.1.3 | TablesystemMicrocodeComponentTable | not-accessible | current | the microcode Component table |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.1.3.1 | RowsystemMicrocodeComponentEntry | not-accessible | current | a row in the microcode Component table |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.1.3.1.1 | ColumnsystemMicrocodeComponentIndex | read-only | current | The index to the Component sub table in the microcode table |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.1.3.1.2 | ColumnsystemMicrocodeComponentVersion | read-only | current | The version of the microcode Component |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.1.3.1.3 | ColumnsystemMicrocodeComponentName | read-only | current | The name of the microcode Component |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.1.3.1.4 | ColumnsystemMicrocodeComponentDescription | read-only | current | The description of the microcode Component |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.1.3.1.5 | ColumnsystemMicrocodeComponentStatus | read-only | current | The status of the microcode Component |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.1.3.1.6 | ColumnsystemMicrocodeComponentSize | read-only | current | The size of the microcode Component |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.1.4 | TablesystemMicrocodeDependencyTable | not-accessible | current | the microcode Dependency table |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.1.4.1 | RowsystemMicrocodeDependencyEntry | not-accessible | current | a row in the microcode Dependency table |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.1.4.1.1 | ColumnsystemMicrocodeDependencyIndex | read-only | current | The index to the Dependency sub table in the microcode table |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.1.4.1.2 | ColumnsystemMicrocodeDependencyPackageName | read-only | current | The name of the microcode Package Dependency |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.1.4.1.3 | ColumnsystemMicrocodeDependencyVersion | read-only | current | The version of the microcode Dependency |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.2 | NodesystemBootParams | |||
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.2.1 | ScalarsystemBootNetwork | read-only | current | this object is the base IP address of the EMP for this CMM |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.2.2 | ScalarsystemBootNetworkGateway | read-only | current | this object is the gateway of the EMP for this CMM |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.2.3 | ScalarsystemBootNetworkNetmask | read-only | current | This is the Netmask of the EMP that is used when this CMM boots. |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.3 | NodesystemHardware | |||
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.3.1 | ScalarsystemHardwareFlashMfg | read-only | current | This object identifies the manufacturer of the Flash memory used on this product. toshiba(7) is for hawk only. The reason 7 is used is because 5 is already use… |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.3.2 | ScalarsystemHardwareFlashSize | read-only | current | This object identifies the size of the flash memory available on this CMM. It is the total flash hardware memory and does not indicate how much of the memory i… |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.3.3 | ScalarsystemHardwareMemoryMfg | read-only | current | This object identifies the manufacturer of the RAM memory used on this CMM. |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.3.4 | ScalarsystemHardwareMemorySize | read-only | current | This object identifies the size of the RAM memory available on this CMM. It is the total RAM hardware memory and does not indicate how much of the memory is fr… |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.3.5 | ScalarsystemHardwareNVRAMBatteryLow | read-only | current | This object identifies the whether the NVRAM battery is low. true(1), false(2) |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.3.6 | ScalarsystemHardwareBootCpuType | read-only | current | Indicates the manufacturer and model number of the CPU. Currently, only two types of processors are enumerated. |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.3.7 | ScalarsystemHardwareJumperInterruptBoot | read-only | current | This object identifies whether the Interrupt Boot Jumper on this CMM is set: True(1), False(2) |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.3.8 | ScalarsystemHardwareJumperForceUartDefaults | read-only | current | This object identifies whether the Force Uart Defaults Jumper on this CMM is set: True(1), False(2) |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.3.9 | ScalarsystemHardwareJumperRunExtendedMemoryDiagnostics | read-only | current | This object identifies whether the Run Extended Memory Diagnostics Jumper on this CMM is set: True(1), False(2) |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.3.10 | ScalarsystemHardwareJumperSpare | read-only | current | This object identifies whether the Spare Jumper on this CMM is set: True(1), False(2) |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.3.11 | TablesystemHardwareFpgaVersionTable | not-accessible | current | This table contains the FPGA version for each FPGA on this CMM |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.3.11.1 | RowsystemHardwareFpgaVersionEntry | not-accessible | current | a row in the systemHardwareFpgaVersionTable |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.3.11.1.1 | ColumnsystemHardwareFpgaVersionIndex | read-only | current | This is the index to one of the FPGA versions on this CMM |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.3.11.1.2 | ColumnsystemHardwareFpgaVersion | read-only | current | This is the major version of one of the FPGA devices on this CMM |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.3.12 | ScalarsystemHardwareBootRomVersion | read-only | current | A string that identifies the boot rom version |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.3.13 | ScalarsystemHardwareBackupMiniBootVersion | read-only | current | A string that identifies the backup miniboot version. |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.3.14 | ScalarsystemHardwareDefaultMiniBootVersion | read-only | current | A string that identifies the default miniboot version. |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.3.15 | ScalarsystemHardwareMinorFpgaVersion | read-only | current | A string that identifies the minor FPGA version. |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.3.16 | ScalarsystemHardwareCpldVersion | read-only | current | A string that identifies the CPLD version. |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.3.17 | ScalarsystemHardwareUbootVersion | read-only | current | A string that identifies the Uboot version. |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.3.18 | ScalarsystemHardwareProdRegId | read-only | current | A string that identifies the product ID register |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.3.19 | ScalarsystemHardwareRevisionRegister | read-only | current | A string that identifies the hardware revision register |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.3.20 | ScalarsystemHardwareXfpId | read-only | current | A string that identifies the XFP ID |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.3.21 | ScalarsystemHardwareUbootMinibootVersion | read-only | current | A string that identifies the Uboot-miniboot version. |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.4 | NodesystemFileSystem | |||
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.4.1 | TablesystemFileSystemTable | not-accessible | current | system file system table for this CMM. |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.4.1.1 | RowsystemFileSystemEntry | not-accessible | current | A row in the system file system table |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.4.1.1.1 | ColumnsystemFileSystemIndex | read-only | current | Index to a specific file system. |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.4.1.1.2 | ColumnsystemFileSystemName | read-only | current | The name of the file system. |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.4.1.1.3 | ColumnsystemFileSystemFreeSpace | read-only | current | the free space in octets of this file system |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.4.2 | ScalarsystemFileSystemDirectoryName | read-write | current | The name of a file system directory. This object is used in conjunction with an Action command. The Action command will set this directory name to the name of … |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.4.3 | ScalarsystemFileSystemDirectoryDateTime | read-only | current | the date and time (in system format) of the last access to this directory |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.4.4 | TablesystemFileSystemFileTable | not-accessible | current | system file system File table for this CMM. This table is used by an Action command which will populate it with file information read from the files in the spe… |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.4.4.1 | RowsystemFileSystemFileEntry | not-accessible | current | A row in the system file system File table |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.4.4.1.1 | ColumnsystemFileSystemFileIndex | read-only | current | Index to a specific file system File. |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.4.4.1.2 | ColumnsystemFileSystemFileName | read-only | current | The name of a file system File |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.4.4.1.3 | ColumnsystemFileSystemFileType | read-only | current | The Type of a file system File |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.4.4.1.4 | ColumnsystemFileSystemFileSize | read-only | current | size of this file |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.4.4.1.5 | ColumnsystemFileSystemFileAttr | read-only | current | attributes of this file |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.4.4.1.6 | ColumnsystemFileSystemFileDateTime | read-only | current | the modification date and time of a file |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5 | NodesystemServices | |||
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.1 | ScalarsystemServicesDate | read-write | current | This object contains the current System Date in the following format: MM/DD/YYYY |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.2 | ScalarsystemServicesTime | read-write | current | This object contains the current System Time in the following format: HH:MM:SS |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.3 | ScalarsystemServicesTimezone | read-write | current | This object contains the current Hour Offset from UTC in the following format: -13:00 to +12:00 OR a well known timezone (PST,CST,etc.) |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.4 | ScalarsystemServicesTimezoneStartWeek | read-write | current | first, second, third, fourth, fifth, last = 1,2,3,4,5,6 |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.5 | ScalarsystemServicesTimezoneStartDay | read-write | current | Sunday, Monday, Tues... = 1,2,3,4,5,6,7 |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.6 | ScalarsystemServicesTimezoneStartMonth | read-write | current | January, February, march... = 1,2,3,4,5,67,8,9,10,11,12 |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.7 | ScalarsystemServicesTimezoneStartTime | read-write | current | 2:00, 3:00, 4:00... = 200, 300, 400, etc. |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.8 | ScalarsystemServicesTimezoneOffset | read-write | current | 60 minutes = 60 |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.9 | ScalarsystemServicesTimezoneEndWeek | read-write | current | first, second, third, fourth, fifth, last = 1,2,3,4,5,6 |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.10 | ScalarsystemServicesTimezoneEndDay | read-write | current | Sunday, Monday, Tues... = 1,2,3,4,5,6,7 |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.11 | ScalarsystemServicesTimezoneEndMonth | read-write | current | January, February, march... = 1,2,3,4,5,6,7,8,9,10,11,12 |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.12 | ScalarsystemServicesTimezoneEndTime | read-write | current | 2:00, 3:00, 4:00... = 200, 300, 400, etc. |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.13 | ScalarsystemServicesEnableDST | read-write | current | This object enables and disables the DST. |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.14 | ScalarsystemServicesWorkingDirectory | read-write | current | This object contains the current file system working directory for this CMM. For example, /flash/certified |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.15 | ScalarsystemServicesArg1 | read-write | current | the 1st argument for system services action routines |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.16 | ScalarsystemServicesArg2 | read-write | current | the 2nd argument for system services action routines |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.17 | ScalarsystemServicesArg3 | read-write | current | the 3rd argument for system services action routines |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.18 | ScalarsystemServicesArg4 | read-write | current | the 4th argument for system services action routines |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.19 | ScalarsystemServicesArg5 | read-write | current | the 5th argument for system services action routines |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.20 | ScalarsystemServicesArg6 | read-write | current | the 6th argument for system services action routines |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.21 | ScalarsystemServicesArg7 | read-write | current | the 7th argument for system services action routines |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.22 | ScalarsystemServicesArg8 | read-write | current | the 8th argument for system services action routines |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.23 | ScalarsystemServicesArg9 | read-write | current | the 9th argument for system services action routines |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.24 | ScalarsystemServicesAction | read-write | current | This object identifies which of the above Actions is to be performed by the System Services Application. Most Actions require one or more parameters be set bef… |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.25 | ScalarsystemServicesResultCode | read-only | current | the result of a system services application |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.26 | ScalarsystemServicesResultString | read-only | current | the string result of a system services application |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.27 | ScalarsystemServicesKtraceEnable | read-write | current | enables/disables the Ktrace facility |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.28 | ScalarsystemServicesSystraceEnable | read-write | current | enables/disables the Systrace facility |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.29 | ScalarsystemServicesTtyLines | read-only | current | the number of tty lines for a console screen |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.30 | ScalarsystemServicesTtyColumns | read-only | current | the number of tty columns for a console screen |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.31 | ScalarsystemServicesMemMonitorEnable | read-write | current | disables/enables the kernel Memory Monitor feature |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.32 | TablesystemServicesKtraceLevelTable | not-accessible | current | the table of Ktrace severity level settings |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.32.1 | RowsystemServicesKtraceLevelEntry | not-accessible | current | A row in the system services ktrace level table. There is one entry for each possible Application ID |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.32.1.1 | ColumnsystemServicesKtraceLevelAppId | read-only | current | the index into the ktrace level table |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.32.1.2 | ColumnsystemServicesKtraceLevel | read-write | current | the ktrace level for a specific Application ID |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.33 | TablesystemServicesSystraceLevelTable | not-accessible | current | the table of Systrace severity level settings |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.33.1 | RowsystemServicesSystraceLevelEntry | not-accessible | current | A row in the system services systrace level table. There is one entry for each possible Application ID |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.33.1.1 | ColumnsystemServicesSystraceLevelAppId | read-only | current | the Systrace level for a specific Application ID. |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.33.1.2 | ColumnsystemServicesSystraceLevel | read-write | current | the Systrace level for a specific Application ID. |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.34 | TablesystemUpdateStatusTable | not-accessible | current | Provides update status for firmware updates |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.34.1 | RowsystemUpdateStatusEntry | not-accessible | current | A row in the update status table. |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.34.1.1 | ColumnsystemUpdateIndex | not-accessible | current | The index to the CMM for which status is required. |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.34.1.2 | ColumnsystemUpdateStatus | read-only | current | Status of a firmware update. In the case of doneNok, further information can be obtained from systemUpdateErrorCode. |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.34.1.3 | ColumnsystemUpdateErrorCode | read-only | current | Error codes for done_nok. |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.35 | ScalarsystemServicesActionPercentComplete | read-only | current | This object identifies the percent completion of the currently executing systemServicesAction. |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.36 | ScalarsystemServicesCurrentArchivePathName | read-write | current | This object identifies the archive currently being read via the systemServicesArchiveTable. This object is the complete pathname to the archive and must be set… |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.37 | TablesystemServicesArchiveTable | not-accessible | current | This table contains the contents of a backup archive. This table is used by the restore action command to display (rather than backup) an archive. The restore … |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.37.1 | RowsystemServicesArchiveEntry | not-accessible | current | A row in the system services archive table. |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.37.1.1 | ColumnsystemServicesArchiveIndex | read-only | current | Index to a specific entry in the backup archive file. |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.37.1.2 | ColumnsystemServicesArchiveName | read-only | current | The name of a file in the backup archive file. |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.37.1.3 | ColumnsystemServicesArchiveType | read-only | current | The type of a file in the backup archive file. |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.37.1.4 | ColumnsystemServicesArchiveSize | read-only | current | The size of a file in the backup archive file. |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.37.1.5 | ColumnsystemServicesArchiveAttr | read-only | current | The attributes of a file in the backup archive file. |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.38 | ScalarsystemServicesUsbEnable | read-write | current | disable/enable the USB interface |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.39 | ScalarsystemServicesUsbAutoCopyEnable | read-write | current | disable/enable the USB auto-copy facility |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.40 | ScalarsystemServicesUsbDisasterRecoveryEnable | read-write | current | disable/enable the USB disaster-recovery factility |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.41 | ScalarsystemServicesFipsEnable | read-write | current | Enable or disable the FIPS mode on AOS switches The default value is disabled. |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.42 | ScalarsystemServicesFipsStatus | read-only | current | Status of the FIPS mode on AOS switches |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.43 | ScalarsystemServicesArg10 | read-write | current | Argument for storing the VRF id |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.44 | ScalarsystemServicesCommonCriteriaEnable | read-write | current | Enable or disable the Common Criteria mode on AOS switches The default value is disabled. |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.5.45 | ScalarsystemServicesCommonCriteriaStatus | read-only | current | Status of the Common Criteria mode on AOS switches |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6 | NodesystemSwitchLogging | |||
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.1 | ScalarsystemSwitchLoggingIndex | read-only | current | A small positive integer used to identify a switch logging output |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.2 | ScalarsystemSwitchLoggingEnable | read-write | current | Global switch logging enable/disable |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.3 | ScalarsystemSwitchLoggingFlash | read-write | current | Enable/disable switch logging to flash |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.4 | ScalarsystemSwitchLoggingSocket | read-write | current | Enable/disable switch logging to a socket |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.5 | ScalarsystemSwitchLoggingSocketIpAddr | read-write | deprecated | The IP Address of a remote host that can be used to send switch logging records to as an option |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.6 | ScalarsystemSwitchLoggingConsole | read-write | current | Enable/disable switch logging to the console |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.7 | TablesystemSwitchLoggingLevelTable | not-accessible | current | The table of switch logging level settings, one for each Application ID |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.7.1 | RowsystemSwitchLoggingLevelEntry | not-accessible | current | A row in the system switch logging level table |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.7.1.1 | ColumnsystemSwitchLoggingLevelAppId | read-only | current | A specific application ID which has a severity level associated with it. This application ID is used as an index into the level table. |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.7.1.2 | ColumnsystemSwitchLoggingLevel | read-write | current | The logging level for a specific application id. |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.8 | ScalarsystemSwitchLoggingClear | read-write | current | Enable clearing of switch logging entries |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.9 | ScalarsystemSwitchLoggingFileSize | read-write | current | Set size of swlog logging file |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.10 | TablesystemSwitchLoggingHostTable | not-accessible | current | The table of switch logging remote hosts. |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.10.1 | RowsystemSwitchLoggingHostEntry | not-accessible | current | A remote switch logging server entry. |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.10.1.1 | ColumnsystemSwitchLoggingHostIpAddr | read-only | current | The IP Address of a remote host that can be used to send switch logging records to. |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.10.1.2 | ColumnsystemSwitchLoggingHostPort | read-create | current | The port number of a remote host that can be used to send switch logging records to. |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.10.1.3 | ColumnsystemSwitchLoggingHostStatus | read-create | current | Provides the ability to add or remove a remote host entry. |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.10.1.4 | ColumnsystemSwitchLoggingHostUserCommandHost | read-create | current | Indicates whether this host may receive user command data. |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.11 | TablesystemSwitchLoggingHostv6Table | not-accessible | current | The table of switch logging remote hosts. |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.11.1 | RowsystemSwitchLoggingHostv6Entry | not-accessible | current | A remote switch logging server entry. |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.11.1.1 | ColumnsystemSwitchLoggingHostv6IpAddr | read-only | current | The IP Address of a remote host that can be used to send switch logging records to. |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.11.1.2 | ColumnsystemSwitchLoggingHostv6Port | read-create | current | The port number of a remote host that can be used to send switch logging records to. |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.11.1.3 | ColumnsystemSwitchLoggingHostv6Status | read-create | current | Provides the ability to add or remove a remote host entry. |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.11.1.4 | ColumnsystemSwitchLoggingHostv6UserCommandHost | read-create | current | Indicates whether this host may receive user command data. |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.12 | ScalarsystemSwitchLoggingHostCount | read-only | current | The number of remote hosts currently defined. |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.13 | ScalarsystemSwitchLoggingConsoleLevel | read-create | current | Messages whose severity level is equal to or more severe than this value will be displayed to the console. |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.14 | ScalarsystemSwitchLoggingUserCommandStatus | read-create | current | User commands will be logged to remote hosts when enabled. |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.15 | ScalarsystemSwitchLoggingSysLogFacilityId | read-write | current | This textual convention enumerates the facilities that originate syslog messages. The Facilities of syslog messages are numerically coded with decimal values. … |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.6.16 | ScalarsystemSwlogViewPassword | read-create | current | Password to be used for authenticating swlog view for registered user |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.7 | NodesystemDNS | |||
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.7.1 | ScalarsystemDNSEnableDnsResolver | read-create | current | Global Domain Name Service enable/disable |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.7.2 | ScalarsystemDNSDomainName | read-create | current | current domain name used by the Domain Name Service |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.7.3 | ScalarsystemDNSNsAddr1 | read-create | current | 1st part of address used by the Domain Name Service |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.7.4 | ScalarsystemDNSNsAddr2 | read-create | current | 2nd part of address used by the Domain Name Service |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.7.5 | ScalarsystemDNSNsAddr3 | read-create | current | 3rd part of address used by the Domain Name Service |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.7.6 | ScalarsystemDNSNsIPv6Addr1 | read-create | current | IPv6 address of the Primary DNS server |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.7.7 | ScalarsystemDNSNsIPv6Addr2 | read-create | current | IPv6 address of the Secondary DNS server |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.7.8 | ScalarsystemDNSNsIPv6Addr3 | read-create | current | IPv6 address of the third DNS server |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.8 | NodesystemSignature | |||
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.8.1 | ScalarsystemSignatureCertified | read-only | current | The signature of certified directory |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.8.2 | ScalarsystemSignatureWorking | read-only | current | The signature of working directory |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.1.8.3 | ScalarsystemSignatureIssu | read-only | current | The signature of Issu directory |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.2 | IdentityalcatelIND1SystemMIBConformance | current | Branch For Alcatel IND BOP Proprietary System Subsystem Conformance Information. | |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.2.1 | IdentityalcatelIND1SystemMIBGroups | current | Branch For Alcatel IND BOP Proprietary System Subsystem Units Of Conformance. | |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.2.1.1 | GroupsystemMicrocodeGroup | current | Group all the system microcode objects together | |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.2.1.2 | GroupsystemBootParamsGroup | current | Group all the system boot parameters together | |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.2.1.3 | GroupsystemHardwareGroup | current | Group all the system Hardware Data together | |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.2.1.4 | GroupsystemServicesGroup | current | Group all the system services parameters together | |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.2.1.5 | GroupsystemFileSystemGroup | current | Group all the system flash file parameters together | |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.2.1.6 | GroupsystemSwitchLoggingGroup | current | Group all the switch logging parameters together | |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.2.1.7 | GroupsystemDNSGroup | current | Group all the systemDNS parameters together | |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.2.1.8 | GroupsystemSwitchLoggingHostGroup | current | A remote switch logging server entry. | |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.2.1.9 | GroupsystemSignatureGroup | current | Group the signature of all directories together. | |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.2.1.10 | GroupsystemNotificationGroup | current | A collection of notifications for System Services events. | |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.2.2 | IdentityalcatelIND1SystemMIBCompliances | current | Branch For Alcatel IND BOP Proprietary System Subsystem Compliance Statements. | |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.2.2.1 | CompliancealcatelIND1SystemMIBCompliance | current | Compliance statement for Alcatel BOP Proprietary System Subsystem. | |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.3 | NodealcatelIND1SystemTrapObjects | |||
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.3.1 | ScalarsystemSwlogName | read-only | current | SWLOG file name whose size exceeded preconfigured value |
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.4 | NodealaSystemMgrTraps | |||
| 1.3.6.1.4.1.6486.800.1.1.1.2.1.4.0.1 | NotificationsystemSwlogSizeTrap | current | The size of the specified file has exceeded 90 percent of preconfigured value, please do back up before getting overwritten. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AppIdIndex | INTEGER (0..254) | current | a small positive integer used to index into tables arranged by Application ID's. |
| CommandPercentComplete | INTEGER (0..100) | current | An indication of percent complete for a command. |
| Enable | INTEGER { enabled(1), disabled(2) } | current | an enumerated value used to indicate whether an entity is enabled(1), or disabled(2) |
| FileSystemIndex | INTEGER { flash(1), uflash(2) } | current | an enumerated value which provides an indication of the file system. The value is a small positive integer indicating the type of the file system |
| MicrocodeDirectoryIndex | INTEGER { loaded(1), certified(2), working(3) } | current | a small positive integer used to index into the Microcode table |
| SeverityLevel | INTEGER { severityLevelOff (1), severityLevelAlarm(2), severityLevelError(3), severityLevelAlert(4), severityLevelWarn (5), severityLevelInfo (6), severityLevelDbg1 (7), severityLevelDbg2 (8), severityLevelDbg3 (9) } | current | an enumerated value which provides an indication of the severity level used for logging and debug purposes. The value is a small integer. |
| SwitchLoggingIndex | INTEGER { console(1), flash(2), socket(3), ipaddr(4) } | current | a small positive integer used to identify switch logging outputs |
| SysLogFacilityId | INTEGER { uucp(0), user(1), system(2), syslog(3), secAuth2(4), secAuth1(5), ntp(6), netNews(7), mail(8), lptr(9), logAudit(10), logAlert(11), local7(12), local6(13), local5(14), local4(15), local3(16), local2(17), local1(18), local0(19), kernel(20), ftp(21), clock2(22), clock1(23) } | current | |
| SystemFileType | INTEGER { file(1), directory(2), undefined(3), tarArchive(4) } | current | a small positive integer used to identify file types |