ALCATEL-IND1-UDP-RELAY-MIB
213 objects
This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey Product Line UDP Relay to forward BOOTP/DHCP requests across VLANs The right to make changes in specification and other information contained in this document without prior notice is reserved. No liability shall be assumed for any incidental, indirect, special, or consequential damages whatsoever arising from or related to this document or the information contained herein. Vendors, end-users, and other interested parties are granted non-exclusive license to use this specification in connection with management of the products for which it is intended to be used. Copyright (C) 1995-2007 Alcatel-Lucent ALL RIGHTS RESERVED WORLDWIDE
Imported Objects
| ALCATEL-IND1-BASE | alaDhcpClientTraps routingIND1UdpRelay |
| ALCATEL-IND1-VLAN-STP-MIB | VlanBitmap |
| IF-MIB | InterfaceIndex |
| INET-ADDRESS-MIB | InetAddressIPv6 |
| SNMP-FRAMEWORK-MIB | SnmpAdminString |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString MacAddress RowStatus TEXTUAL-CONVENTION |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1 | IdentityalcatelIND1UDPRelayMIB | This module describes an authoritative enterprise-specific Simple Network Management Protocol (SNMP) Management Information Base (MIB): For the Birds Of Prey P… | ||
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1 | IdentityalcatelIND1UDPRelayMIBObjects | current | Branch For UDP Relay Subsystem Managed Objects. | |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1 | NodeiphelperMIB | |||
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.1 | TableiphelperTable | not-accessible | current | A list of active UDP Relay Service instances. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.1.1 | RowiphelperEntry | not-accessible | current | An entry in UDP Relay table |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.1.1.1 | ColumniphelperService | read-create | current | This specifies a service to be forwarded by UDP Relay. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.1.1.2 | ColumniphelperForwAddr | read-create | current | This specifies relayed service's forwarding address. For entries with iphelperService equal to iphelperBootp(1): This object can either be set to a distinct IP… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.1.1.3 | ColumniphelperVlan | read-create | current | This specifies a Vlan to which the service is to be forwarded. For entries with iphelperService equal to iphelperBootp(1), a value of 0 indicates that no vlan … |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.1.1.4 | ColumniphelperStatus | read-create | current | Row Status for creating/deleting |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.2 | TableiphelperStatTable | not-accessible | current | This keeps statistics for each service by server address. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.2.1 | RowiphelperStatEntry | not-accessible | current | An entry in the stat table. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.2.1.1 | ColumniphelperServerAddress | read-write | current | This specifies the unique server address. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.2.1.2 | ColumniphelperRxFromClient | read-write | current | This keeps track of the number of packets recieved from the client. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.2.1.3 | ColumniphelperTxToServer | read-write | current | This keeps track of the number of packets transmitted to the server. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.2.1.4 | ColumniphelperMaxHopsViolation | read-write | current | This keeps track of the number of packets dropped due to max hops violation. Only meaningful for entries with ipHelperService equal to iphelperBootp(1). |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.2.1.5 | ColumniphelperForwDelayViolation | read-write | current | This keeps track of the number of packets dropped due to forward delay violation. Only meaningful for entries with ipHelperService equal to iphelperBootp(1). |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.2.1.6 | ColumniphelperResetAll | read-write | current | This parameter resets all the stats. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.2.1.7 | ColumniphelperAgentInfoViolation | read-only | current | This keeps track of the number of packets dropped due to DHCP packet with giaddr field not equal to zero and Relay Agent Information option is present and also… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.2.1.8 | ColumniphelperInvalidGatewayIP | read-only | current | This keeps track of the number of packets dropped due to giaddr matching a local subnet and Relay Agent Information option is present in the DHCP packet. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.2.1.9 | ColumniphelperInvalidAgentInfoOptFrmSrver | read-only | current | This keeps track of the number of packets dropped due to invalid from DHCP server with Relay Agent Information option in the DHCP packet. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.3 | ScalariphelperForwDelay | read-write | current | This sets the BOOTP/DHCP relay's forwarding delay and is only used by the BOOTP/DHCP service. For other services it is ignored.It is typically set as seconds, … |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.4 | ScalariphelperMaxHops | read-write | current | This sets the BOOTP/DHCP relay's maximum hops forwarding limit and is only used by the BOOTP/DHCP service. For other services it is ignored. If a frame arrives… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.5 | ScalariphelperForwardOption | read-write | current | This is only significant for the BOOTP/DHCP service. It allows the relay to forward DHCP requests only when they are issued by an Authenticated Vlan client.Nee… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.6 | ScalariphelperBootupOption | read-write | current | This is only significant for the BOOTP/DHCP service. It allows the user to enable or disable the functionality of the relay to get an IP address at the time of… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.7 | ScalariphelperBootupPacketOption | read-write | current | This is only significant for the BOOTP/DHCP service. It allows the user to select the packet format with the choices of BOOTP and DHCP to be used to get an IP … |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.8 | TableiphelperxServicePortAssociationTable | not-accessible | current | A list of services being forwarded with their associated ports. An entry in this table is allowed only for the services listed below: iphelperBootp iphelperNbn… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.8.1 | RowiphelperxServicePortAssociationEntry | not-accessible | current | An entry in UDP Relay PortAssociation table |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.8.1.1 | ColumniphelperxServicePortAssociationService | read-write | current | This specifies the service being forwarded. Legal values: iphelperBootp(1) iphelperNbnsNbdd(2) iphelperNbdd(3) iphelperDns(4) iphelperTacacs(5) iphelperTftp(6)… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.8.1.2 | ColumniphelperxServicePortAssociationPort | read-only | current | UDP port for the service. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.8.1.3 | ColumniphelperxServicePortAssociationName | read-only | current | The name and/or description of the service. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.8.1.4 | ColumniphelperxServicePortAssociationStatus | read-create | current | Row Status for creating/deleting |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.9 | TableiphelperxPortServiceAssociationTable | not-accessible | current | A list of services being forwarded with their associated ports. An entry in this table is allowed only for those services NOT using one of the following well-k… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.9.1 | RowiphelperxPortServiceAssociationEntry | not-accessible | current | An entry in UDP Relay PortAssociation table |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.9.1.1 | ColumniphelperxPortServiceAssociationService | read-only | current | This specifies the service being forwarded. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.9.1.2 | ColumniphelperxPortServiceAssociationPort | read-write | current | UDP port for the service. May not be one of the following well-known ports: 53 - DNS 65 - TACACS 67 - BOOTP/DHCP 68 - BOOTP/DHCP 69 - TFTP 123 - NTP 137 - NBNS… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.9.1.3 | ColumniphelperxPortServiceAssociationName | read-create | current | The name and/or description of the service. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.9.1.4 | ColumniphelperxPortServiceAssociationStatus | read-create | current | Row Status for creating/deleting |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.10 | TableiphelperxPropertiesTable | not-accessible | current | A list of services being forwarded with their associated ports. There is an entry in this table for each service being forwarded by UDP Relay, including those … |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.10.1 | RowiphelperxPropertiesEntry | not-accessible | current | An entry in UDP Relay Service Properties table |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.10.1.1 | ColumniphelperxPropertiesService | read-only | current | This specifies the service to be forwarded. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.10.1.2 | ColumniphelperxPropertiesPort | read-only | current | UDP port for the service. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.10.1.3 | ColumniphelperxPropertiesName | read-only | current | The name/description of the service. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.11 | TableiphelperxStatTable | not-accessible | current | This keeps statistics for each service by server address. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.11.1 | RowiphelperxStatEntry | not-accessible | current | An entry in the stat table. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.11.1.1 | ColumniphelperxStatService | read-only | current | This specifies the service being forwarded. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.11.1.2 | ColumniphelperxStatServerAddress | read-write | current | This specifies the unique server address. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.11.1.3 | ColumniphelperxStatVlan | read-only | current | This specifies the unique Vlan of the server. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.11.1.4 | ColumniphelperxStatRxFromClient | read-only | current | This keeps track of the number of packets recieved from the client. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.11.1.5 | ColumniphelperxStatTxToServer | read-only | current | This keeps track of the number of packets transmitted to the server. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.11.1.6 | ColumniphelperxStatReset | read-write | current | This parameter resets all the stats for this entry. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.12 | ScalariphelperAgentInformation | read-write | current | This is only significant for the BOOTP/DHCP service. It allows the user to enable or disable the functionality of inserting the relay agent information option … |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.13 | ScalariphelperAgentInformationPolicy | read-write | current | This is only significant for the BOOTP/DHCP service. It allows the user to select the policy of either drop, keep or replace the relay agent information option… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.14 | TableiphelperDhcpSnoopingVlanTable | not-accessible | current | A list of vlans that have DHCP Snooping enabled. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.14.1 | RowiphelperDhcpSnoopingVlanEntry | not-accessible | current | A DHCP Snooping VLAN entry. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.14.1.1 | ColumniphelperDhcpSnoopingVlanNumber | read-write | current | The VLAN number identifying this instance. Valid range from 1 to 4094. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.14.1.2 | ColumniphelperDhcpSnoopingVlanOpt82DataInsertionStatus | read-create | current | The DHCP Option-82 data insertion status. Default value is enabled, which means once the VLAN is enabled for DHCP snooping, the Option-82 field will be inserte… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.14.1.3 | ColumniphelperDhcpSnoopingVlanMacAddrVerificationStatus | read-create | current | The DHCP Snooping MAC Address verification status. Default value is enabled. Once enabled, for all the incoming DHCP traffic to those DHCP Snooping enabled vla… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.14.1.4 | ColumniphelperDhcpSnoopingVlanTrafficSuppressionStatus | read-create | current | The DHCP Snooping Traffic Suppression status. Default value is disabled. Once enabled, for all the incoming DHCP traffic to those DHCP Snooping enabled vlan po… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.14.1.5 | ColumniphelperDhcpSnoopingVlanStatus | read-create | current | Row Status for creating/deleting |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.15 | TableiphelperDhcpSnoopingPortTable | not-accessible | current | A list of ports that have DHCP Snooping trust status. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.15.1 | RowiphelperDhcpSnoopingPortEntry | not-accessible | current | A DHCP Snooping Port entry. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.15.1.1 | ColumniphelperDhcpSnoopingPortIfIndex | read-only | current | The ifIndex subindex identifying this instance. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.15.1.2 | ColumniphelperDhcpSnoopingPortTrustMode | read-write | current | The DHCP Snooping's VLAN port's trust mode. Default value is client-only, which means once the VLAN is enabled for DHCP snooping, the vlan ports only allow DHC… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.15.1.3 | ColumniphelperDhcpSnoopingPortTrafficSuppression | read-write | current | The DHCP Snooping Traffic Suppression status. Default value is disabled. Once enabled, for all the incoming DHCP traffic to those ports will not be flooded ins… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.15.1.4 | ColumniphelperDhcpSnoopingPortMacAddrViolation | read-only | current | This keeps track of the number of packets dropped due to DHCP packet with the source MAC Address not equal the client DHCP Hardware address in the DHCP packet. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.15.1.5 | ColumniphelperDhcpSnoopingPortDhcpServerViolation | read-only | current | This keeps track of the number of packets dropped due to receiving an DHCP server packet on a DHCP Snooping enabled port. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.15.1.6 | ColumniphelperDhcpSnoopingPortOption82Violation | read-only | current | This keeps track of the number of packets dropped due to a relay agent forards a packet that includes option 82 info to an untrusted port. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.15.1.7 | ColumniphelperDhcpSnoopingPortRelayAgentViolation | read-only | current | This keeps track of the number of packets dropped due to an DHCP relay agent forwards a DHCP packate includes an relay agent ip address that is not 0.0.0.0. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.15.1.8 | ColumniphelperDhcpSnoopingPortBindingViolation | read-only | current | This keeps track of the number of packets dropped due to receiving an DHCP Relase or DHCP Decline message that contains a MAC address in the DHCP snooping bind… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.15.1.9 | ColumniphelperDhcpSnoopingPortIpSourceFiltering | read-write | current | The DHCP Snooping IP Source filtering status. Default value is disabled. Once enabled, only the incoming traffic with the proper client IP address, MAC address… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.16 | TableiphelperDhcpSnoopingBindingTable | not-accessible | current | DHCP Snooping binding table. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.16.1 | RowiphelperDhcpSnoopingBindingEntry | not-accessible | current | A DHCP Snooping binding entry. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.16.1.1 | ColumniphelperDhcpSnoopingBindingMacAddress | read-write | current | The MAC Address subindex identifying this instance. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.16.1.2 | ColumniphelperDhcpSnoopingBindingIfIndex | read-write | current | The IfIndex subindex identifying this instance. It is the the interface where the DHCP request is coming in from. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.16.1.3 | ColumniphelperDhcpSnoopingBindingIpAddress | read-create | current | The Ip Address offered by the DHCP Server to the Client. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.16.1.4 | ColumniphelperDhcpSnoopingBindingVlan | read-create | current | It is the VLAN Id where the DHCP client belongs to. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.16.1.5 | ColumniphelperDhcpSnoopingBindingLeaseTime | read-only | current | The lease time of the client's IP Address in minutes. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.16.1.6 | ColumniphelperDhcpSnoopingBindingType | read-create | current | The learning/configuration nature of the binding entry. Normally, the entries are learned dynamically, while it also can be statically/manually configured. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.16.1.7 | ColumniphelperDhcpSnoopingBindingRowStatus | read-create | current | Row Status for creating/deleting |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.16.1.8 | ColumniphelperDhcpSnoopingBindingRemoteFlag | read-only | current | Flag to indicate whether the binding entry belong to local chassis or remote chassis in multi-chassis environment. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.17 | ScalariphelperDhcpSnooping | read-write | current | Enabling DHCP Snooping at the switch level. For the vlan level, it is enabled implicitly when an individual vlan's DHCP Snooping is enbled. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.18 | ScalariphelperDhcpSnoopingOpt82DataInsertionStatus | read-write | current | The DHCP Option-82 data insertion status at switch level. Default value is enabled, the Option-82 field will be inserted in the DHCP packets between the Relay … |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.19 | ScalariphelperDhcpSnoopingMacAddrVerificationStatus | read-write | current | The DHCP Snooping MAC Address verification status at switch level. Default value is enabled. Once enabled, for all the incoming DHCP traffic to the port, it co… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.20 | ScalariphelperDhcpSnoopingTrafficSuppressionStatus | read-write | current | The DHCP Snooping Traffic Suppression status at switch level. Default value is disabled. Once enabled, for all the incoming DHCP traffic to the ports will not … |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.21 | ScalariphelperDhcpSnoopingBindingStatus | read-write | current | This object specifies if the capability of building the DHCP Snooping Binding Table/Database is enable or not. By default, it is enabled. It is applicable for … |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.22 | ScalariphelperDhcpSnoopingBindingDatabaseSyncTimeout | read-write | current | The DHCP Snooping Binding Database synchronization timeout value. It is used to specify the synchronization frequency, in seconds, between the binding table in… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.23 | ScalariphelperDhcpSnoopingBindingDatabaseLastSyncTime | read-only | current | The time stamp of the last successuful DHCP Snooping Binding Database synchronization. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.24 | ScalariphelperDhcpSnoopingBindingDatabaseAction | read-write | current | This object identifies the action to be performed. Purge: means to clear the binding table entries in the memory. Renew: means to populate the binding table en… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.25 | ScalariphelperTrafficSuppressionStatus | read-write | current | DHCP packet traffic suppression status. By default, it is disabled. Once enabled, all incoming DHCP packets will be sent to software only, and no longer be har… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.26 | ScalariphelperDhcpSnoopingBypassOpt82CheckStatus | read-write | current | DHCP bypass option-82 check status. By default, it is disabled. Once enabled, it will no longer enforce the check of option-82 field in the incoming DHCP Packe… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.27 | ScalariphelperDhcpOption82FormatType | read-write | current | DHCP option-82 defines the type of information carried in circuit id and remote id sub option fields. If the type selected is string the actual value of the st… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.28 | ScalariphelperDhcpOption82StringValue | read-write | current | The value of the string that will be used in the circuit id and remote id sub options. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.29 | ScalariphelperPXESupport | read-write | current | When enabled the relay agent will replace the source IP address of the packet with the gateway IP address from the DHCP packet. The default value is disabled. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.30 | ScalariphelperDhcpSnoopingBindingPersistencyStatus | read-write | current | DHCP Snooping binding table persistency check status. By default, it is disabled. Once enabled, the binding entries expiry will be solely depend on Lease time |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.31 | ScalariphelperDhcpSnoopingOption82FormatASCIIField1 | read-write | deprecated | The type of the first field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id of the DHCP packet. This Field is applicable … |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.32 | ScalariphelperDhcpSnoopingOption82FormatASCIIField1StringValue | read-write | deprecated | The string value of the first field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id of the DHCP packet. This Field is app… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.33 | ScalariphelperDhcpSnoopingOption82FormatASCIIField2 | read-write | deprecated | The type of the second field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id of the DHCP packet. This Field is applicable… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.34 | ScalariphelperDhcpSnoopingOption82FormatASCIIField2StringValue | read-write | deprecated | The string value of the second field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id of the DHCP packet. This Field is ap… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.35 | ScalariphelperDhcpSnoopingOption82FormatASCIIField3 | read-write | deprecated | The type of the third field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id of the DHCP packet. This Field is applicable … |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.36 | ScalariphelperDhcpSnoopingOption82FormatASCIIField3StringValue | read-write | deprecated | The string value of the third field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id of the DHCP packet. This Field is app… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.37 | ScalariphelperDhcpSnoopingOption82FormatASCIIField4 | read-write | deprecated | The type of the fourth field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id of the DHCP packet. This Field is applicable… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.38 | ScalariphelperDhcpSnoopingOption82FormatASCIIField4StringValue | read-write | deprecated | The string value of the fourth field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id of the DHCP packet. This Field is ap… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.39 | ScalariphelperDhcpSnoopingOption82FormatASCIIField5 | read-write | deprecated | The type of the fifth field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id of the DHCP packet. This Field is applicable … |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.40 | ScalariphelperDhcpSnoopingOption82FormatASCIIField5StringValue | read-write | deprecated | The string value of the fifth field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id of the DHCP packet. This Field is app… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.41 | ScalariphelperDhcpSnoopingOption82FormatASCIIDelimiter | read-write | deprecated | The value of the delimiter that is inserted between the fields in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id of the DHC… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.42 | TableiphelperDhcpSourceFilterVlanTable | not-accessible | current | A list of vlans that have ip-source-filtering enabled. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.42.1 | RowiphelperDhcpSourceFilterVlanEntry | not-accessible | current | A Source Filtering enabled VLAN entry. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.42.1.1 | ColumniphelperDhcpSourceFilterVlanNumber | not-accessible | current | The VLAN number identifying this instance. Valid range from 1 to 4094. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.42.1.2 | ColumniphelperDhcpSourceFilterVlanFilteringStatus | read-write | current | The DHCP Snooping IP Source filtering status. Default value is disabled. Once enabled, only the incoming traffic with the proper client IP address, MAC address… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.43 | ScalariphelperOption82Policy | read-write | current | This is only significant for the BOOTP/DHCP service. It allows the user to select the option-82 insertion policy of either drop, keep or replace the option-82 … |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.44 | TableiphelperDhcpSnoopingOption82FormatASCIIConfigurableTable | not-accessible | current | A list of ascii fields used for Circuit ID or Remote ID. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.44.1 | RowiphelperDhcpSnoopingOption82FormatASCIIConfigurableEntry | not-accessible | current | An ascii field entry for Circuit ID or Remote ID. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.44.1.1 | ColumniphelperDhcpSnoopingOption82FormatASCIIConfigurableIndex | not-accessible | current | This object specifies the either circuit id or remote id for option82. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.44.1.2 | ColumniphelperDhcpSnoopingOption82FormatASCIIConfigurableField1 | read-create | current | The type of the first field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id or remote id of the DHCP packet. This Field i… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.44.1.3 | ColumniphelperDhcpSnoopingOption82FormatASCIIConfigurableField1StrVal | read-create | current | The string value of the first field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id or remote id of the DHCP packet. This… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.44.1.4 | ColumniphelperDhcpSnoopingOption82FormatASCIIConfigurableField2 | read-create | current | The type of the second field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id or remote id of the DHCP packet. This Field … |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.44.1.5 | ColumniphelperDhcpSnoopingOption82FormatASCIIConfigurableField2StrVal | read-create | current | The string value of the second field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id or remote id of the DHCP packet. Thi… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.44.1.6 | ColumniphelperDhcpSnoopingOption82FormatASCIIConfigurableField3 | read-create | current | The type of the third field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id or remote id of the DHCP packet. This Field i… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.44.1.7 | ColumniphelperDhcpSnoopingOption82FormatASCIIConfigurableField3StrVal | read-create | current | The string value of the third field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id or remote id of the DHCP packet. This… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.44.1.8 | ColumniphelperDhcpSnoopingOption82FormatASCIIConfigurableField4 | read-create | current | The type of the fourth field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id or remote id of the DHCP packet. This Field … |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.44.1.9 | ColumniphelperDhcpSnoopingOption82FormatASCIIConfigurableField4StrVal | read-create | current | The string value of the fourth field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id or remote id of the DHCP packet. Thi… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.44.1.10 | ColumniphelperDhcpSnoopingOption82FormatASCIIConfigurableField5 | read-create | current | The type of the fifth field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id or remote id of the DHCP packet. This Field i… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.44.1.11 | ColumniphelperDhcpSnoopingOption82FormatASCIIConfigurableField5StrVal | read-create | current | The string value of the fifth field in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id or remote id of the DHCP packet. This… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.44.1.12 | ColumniphelperDhcpSnoopingOption82FormatASCIIConfigurableDelimiter | read-create | current | The value of the delimiter that is inserted between the fields in the Option 82 string in ASCII format, which will be copied to Option-82 circuit id or remote … |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.44.1.13 | ColumniphelperDhcpSnoopingOption82FormatASCIIConfigurableStatus | read-create | current | This object specifies the status of the entry. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.45 | ScalaralaMdnsGreTunnelName | read-write | current | Specifies the tunnel name for the mdns feature. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.46 | ScalaralaMdnsAdminStatus | read-write | current | Mdns global status |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.47 | ScalaralaMdnsFloodVlans | read-write | current | Mdns flood vlans |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.48 | TableiphelperDhcpSourceFilterAllowSubnetTable | not-accessible | current | A list of ip address that have exempted from ip-source-filtering enabled. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.48.1 | RowiphelperDhcpSourceFilterAllowIpEntry | not-accessible | current | A Source Filtering exempted ip enabled entry. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.48.1.1 | ColumniphelperDhcpSourceFilterExpIpAddress | read-write | current | The Ip address identifying this instance |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.48.1.2 | ColumniphelperDhcpSourceFilterExpIpMask | read-write | current | The Mask address identifying this instance |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.48.1.3 | ColumniphelperDhcpSourceFilterVlan | read-write | current | The VLAN number identifying this instance. Valid range from 1 to 4094. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.48.1.4 | ColumniphelperDhcpSourceFilterExpIpStatus | read-write | current | The DHCP snooping IP source filtering exception for subnets status. Default value is disabled. Once enabled, only the incoming traffic with the configured IP a… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.49 | ScalariphelperDhcpSnoopingTrapStatus | read-write | current | This is only significant for the BOOTP/DHCP service. It allows the user to to configure trap-mode for snooping. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.1.50 | ScalariphelperDhcpSnoopingArpAllowStatus | read-write | current | This object specifies if the capability to allow arp packets is enabled or not when the ISF mode is enabled. By default, it is enabled. It is applicable for bo… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2 | Nodeipv6helperMIB | |||
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.1 | Tableipv6helperTable | not-accessible | current | A list of active DHCPV6 Relay Service instances. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.1.1 | Rowipv6helperEntry | not-accessible | current | An entry in DHCPV6 table |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.1.1.1 | Columnipv6helperForwAddr | read-create | current | This specifies relayed service's forwarding address. This object is used set DHCPV6 server IPv6 address. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.1.1.2 | Columnipv6helperVlan | read-create | current | This specifies a Vlan to which the service is to be forwarded. a value of 0 indicates that no vlan is being used. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.1.1.3 | Columnipv6helperStatus | read-create | current | Row Status for creating/deleting |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.2 | Scalaripv6helperForwardOption | read-write | current | This object is to indicate whether relay should work system wide or per vlan. Default value is standard |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.3 | Scalaripv6helperMaxHops | read-write | current | This sets the DHCPv6 relay's maximum hops forwarding limit . If a frame arrives with hopcount greater than or equal to ipv6helperMaxHops, it will be dropped. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.4 | Scalaripv6helperDhcpSnooping | read-write | current | Enabling LDRA/DHCPv6 Snooping at the switch level. For the vlan level, it is enabled implicitly when an individual vlan's LDRA/DHCPv6 Snooping is enbled. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.5 | Tableipv6helperDhcpSnoopingVlanTable | not-accessible | current | A list of vlans that have LDRA/DHCPv6 Snooping enabled. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.5.1 | Rowipv6helperDhcpSnoopingVlanEntry | not-accessible | current | A LDRA/DHCPv6 Snooping VLAN entry. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.5.1.1 | Columnipv6helperDhcpSnoopingVlanNumber | read-write | current | The VLAN number identifying this instance. Valid range from 1 to 4094. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.5.1.2 | Columnipv6helperDhcpSnoopingVlanStatus | read-create | current | Row Status for creating/deleting |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.6 | Tableipv6helperDhcpSnoopingPortTable | not-accessible | current | A list of ports that have LDRA/DHCPv6 Snooping trust status. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.6.1 | Rowipv6helperDhcpSnoopingPortEntry | not-accessible | current | A LDRA/DHCP Snooping Port entry. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.6.1.1 | Columnipv6helperDhcpSnoopingPortIfIndex | read-only | current | The ifIndex subindex identifying this instance. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.6.1.2 | Columnipv6helperDhcpSnoopingPortTrustMode | read-write | current | The LDRA/DHCPv6 Snooping's VLAN port's trust mode. Default value is clientOnlyUntrusted, which means once the VLAN is enabled for DHCPv6 snooping, the vlan por… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.6.1.3 | Columnipv6helperSnoopingClientViolation | read-only | current | This keeps track of the number client violation packets dropped. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.6.1.4 | Columnipv6helperSnoopingServerViolation | read-only | current | This keeps track of the number of server violation packets received/dropped , server packet received on client port. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.6.1.5 | Columnipv6helperSnoopingBindingViolation | read-only | current | This keeps track of the number of packets dropped due to mismacthed binding entry with client infomration. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.6.1.6 | Columnipv6helperSnoopingInterfaceidViolation | read-only | current | This keeps track of the number of packets dropped due to invalid interface id value from DHCP server in Relay Agent Information option in the DHCP packet. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.6.1.7 | Columnipv6helperSnoopingPortSourceFilterStatus | read-write | current | IPV6 Source filtering status. Default value is disabled. Once enabled, only the incoming traffic with the proper client IPV6 address, MAC address and port will… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.7 | Scalaripv6helperDhcpSnoopingBindingStatus | read-write | current | This object specifies if the capability of building the DHCPv6 Snooping Binding Table/Database is enable or not. By default, it is enabled. It is applicable fo… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.8 | Tableipv6helperDhcpSnoopingBindingTable | not-accessible | current | DHCP Snooping binding table. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.8.1 | Rowipv6helperDhcpSnoopingBindingEntry | not-accessible | current | A LDRA/DHCPv6 Snooping binding entry. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.8.1.1 | Columnipv6helperBindingLinkLocalAddress | read-write | current | The Link loacl Address subindex identifying this instance. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.8.1.2 | Columnipv6helperBindingVlan | read-write | current | It is the VLAN Id where the DHCP client belongs to. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.8.1.3 | Columnipv6helperBindingIfIndex | read-write | current | The IfIndex subindex identifying this instance. It is the the interface where the DHCP request is coming in from. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.8.1.4 | Columnipv6helperBindingGlobalIpv6Address | read-create | current | The Ip Address offered by the DHCP Server to the Client. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.8.1.5 | Columnipv6helperBindingLeaseTime | read-only | current | The lease time of the client's IP Address. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.8.1.6 | Columnipv6helperBindingRowStatus | read-create | current | Row Status for creating/deleting |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.9 | Scalaripv6helperDhcpSnoopingBindingDatabaseSyncTimeout | read-write | current | The DHCPv6 Snooping Binding Database synchronization timeout value. It is used to specify the synchronization frequency, in seconds, between the binding table … |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.10 | Scalaripv6helperDhcpSnoopingBindingDatabaseLastSyncTime | read-only | current | The time stamp of the last successuful DHCPv6 Snooping Binding Database synchronization. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.11 | Scalaripv6helperDhcpSnoopingBindingDatabaseAction | read-write | current | This object identifies the action to be performed. Purge: means to clear the binding table entries in the memory. Renew: means to populate the binding table en… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.12 | Scalaripv6helperDhcpSnoopingBindingPersistencyStatus | read-write | current | DHCP Snooping binding table persistency check status. By default, it is disabled. Once enabled, the binding entries expiry will be solely depend on Lease time |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.13 | Tableipv6helperStatTable | not-accessible | current | This keeps statistics for DHCPv6 server address. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.13.1 | Rowipv6helperStatEntry | not-accessible | current | An entry in the stat table. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.13.1.1 | Columnipv6helperStatsServerAddress | read-only | current | This specifies the unique server address. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.13.1.2 | Columnipv6helperStatsVlan | read-write | current | It is the VLAN Id of the server for which stats displayed in case of vlan level relay configured. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.13.1.3 | Columnipv6helperTxToServer | read-only | current | This keeps track of the number of packets transmitted to the server. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.14 | Scalaripv6helperInterfaceIdPrefixValue | read-write | current | The value of the string that will be added along with the standard interface id ((chassis group(1 byte), chassis id(1 byte), vlan(2 byte) and ifIndex(4 byte)) … |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.15 | Scalaripv6helperRemoteIdEnterpriseNumber | read-write | current | The value of the Enterprise Number that will be used in the remote id sub options. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.16 | Scalaripv6helperRemoteIdUserStringValue | read-write | current | The value of the string that will be used in the remote id sub options. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.17 | Scalaripv6helperRemoteIdFormatType | read-write | current | DHCPv6 remote-id defines the type of information carried in remote id option fields. ipv6helperRemoteIdEnterpriseNumber should be configured before configuring… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.18 | Scalaripv6helperRxFromClient | read-only | current | This keeps track of the number of packets recieved from the client. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.19 | Scalaripv6helperMaxHopsViolation | read-only | current | This keeps track of the number of packets dropped due to max hops violation. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.20 | Scalaripv6helperResetAll | read-write | current | This parameter resets all the stats. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.21 | Tableipv6helperSourceFilterVlanTable | not-accessible | current | A list of vlans that have ipv6-source-filtering enabled. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.21.1 | Rowipv6helperSourceFilterVlanEntry | not-accessible | current | A Source Filtering enabled VLAN entry. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.21.1.1 | Columnipv6helperSourceFilterVlan | read-write | current | The VLAN number identifying this instance. Valid range from 1 to 4094. |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.1.2.21.1.2 | Columnipv6helperSourceFilterVlanStatus | read-write | current | IPV6 Source filtering status. Default value is disabled. Once enabled, only the incoming traffic with the proper client IPV6 address, MAC address , port and vl… |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.2 | IdentityalcatelIND1UDPRelayMIBConformance | current | Branch For UDP Relay Subsystem Conformance Information. | |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.2.1 | IdentityalcatelIND1UDPRelayMIBGroups | current | Branch For UDP Relay Subsystem Units Of Conformance. | |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.2.1.1 | GroupiphelperGroup | current | Collection of objects for the management of parameters of UDP Relay. | |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.2.1.2 | GroupiphelperStatGroup | current | Collection of objects for management of statistics for UDP Relay. | |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.2.1.3 | GroupiphelperMiscGroup | current | Other independent objects of UDP Relay. | |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.2.1.4 | GroupalaDhcpClientTrapsGroup | current | Collection of traps for management of DHCP Client | |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.2.1.5 | GroupiphelperSourceGroup | current | Source filtering status at vlan level | |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.2.1.6 | GroupiphelperOption82FormatASCIIConfigurableGroup | current | Collection of objects identifying option-32 for Circuit ID and Remote ID. | |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.2.1.7 | GroupalaDhcpClientTrapObjectsGroup | current | Objects used in UDP Relay Notifications | |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.2.1.8 | GroupiphelperxGroup | current | An entry in UDP Relay PortAssociation table | |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.2.1.9 | Groupipv6helperGroup | current | Collection of objects for the management of parameters of DHCPV6 Relay. | |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.2.1.10 | Groupipv6helperMiscGroup | current | Other independent objects of DHCPV6 Relay. | |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.2.1.11 | Groupipv6helperSourceFilterGroup | current | IPV6 Source filtering status at vlan level | |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.2.2 | IdentityalcatelIND1UDPRelayMIBCompliances | current | Branch For UDP Relay Subsystem Compliance Statements. | |
| 1.3.6.1.4.1.6486.800.1.2.1.10.9.1.2.2.1 | CompliancealcatelIND1UDPRelayMIBCompliance | current | Compliance statement for UDP Relay | |
| 1.3.6.1.4.1.6486.800.1.3.2.23.1 | NodealaDhcpClientTrapsDesc | |||
| 1.3.6.1.4.1.6486.800.1.3.2.23.1.0.1 | NotificationalaDhcpClientAddressAddTrap | current | When new IP address is assigned to DHCP Client interface. | |
| 1.3.6.1.4.1.6486.800.1.3.2.23.1.0.2 | NotificationalaDhcpClientAddressExpiryTrap | current | When the lease time expires or when DHCP client not able to renew/rebind an IP address. | |
| 1.3.6.1.4.1.6486.800.1.3.2.23.1.0.3 | NotificationalaDhcpClientAddressModifyTrap | current | When the dhcp client not able to obtain the existing IP address and new IP address is assigned to the DHCP client. | |
| 1.3.6.1.4.1.6486.800.1.3.2.23.1.0.4 | NotificationalaDhcpBindingDuplicateEntry | current | Trap to notify MAC Movement in DHCP-Binding Table Mac Address, Vlan, Previous ifIndex, Current ifIndex | |
| 1.3.6.1.4.1.6486.800.1.3.2.23.2 | NodealaDhcpClientTrapsObj | |||
| 1.3.6.1.4.1.6486.800.1.3.2.23.2.1 | ScalaralaDhcpClientAddress | accessible-for-notify | current | This object specifies the current IP address of the DHCP client. |
| 1.3.6.1.4.1.6486.800.1.3.2.23.2.2 | ScalaralaDhcpClientNewAddress | accessible-for-notify | current | This object specifies the new IP address assigned for the DHCP client. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| IphelpereOption82ASCIIFieldType | INTEGER { none(0), macAddress(1), systemName(2), userString(3), interfaceAlias(4), vlan(5), interface(6), cvlan(7), portAlias(8) } | current | Ip helper Option 82 Format ASCII field type |
| IphelperOption82CircuitOrRemoteId | INTEGER { circuitid(1), remoteid(2) } | current | Circuit Id or Remote Id for Option 82 Format ASCII field. |
| IphelperServIndex | INTEGER { iphelperBootp(1), iphelperNbnsNbdd(2), iphelperNbdd(3), iphelperDns(4), iphelperTacacs(5), iphelperTftp(6), iphelperNtp(7), iphelperOther1(8), iphelperOther2(9), iphelperOther3(10), iphelperOther4(11), iphelperOther5(12), iphelperOther6(13), iphelperOther7(14), iphelperOther8(15), iphelperOther9(16), iphelperOther10(17) } | current | IphelperServIndex provides a means to specify a service to be forwarded by UDP Relay. Some values indicate a specfic protocol and associated UDP port(s): Value Protocol UDP port(s) iphelperBootp BOOTP/DHCP 67/68 iphelpe… |