MIB Viewer

ALLIEDTELESYN-MIB

772 objects
No module-level DESCRIPTION found.
OIDNameAccessStatusDescription
1.3.6.1.4.1.207NodealliedTelesyn
1.3.6.1.4.1.207.1Nodeproducts
1.3.6.1.4.1.207.1.1NodebridgeRouter
1.3.6.1.4.1.207.1.1.8NodecentreCOM-AR300Router
1.3.6.1.4.1.207.1.1.11NodecentreCOM-AR720Router
1.3.6.1.4.1.207.1.1.12NodecentreCOM-AR300LRouter
1.3.6.1.4.1.207.1.1.13NodecentreCOM-AR310Router
1.3.6.1.4.1.207.1.1.14NodecentreCOM-AR300LURouter
1.3.6.1.4.1.207.1.1.15NodecentreCOM-AR300URouter
1.3.6.1.4.1.207.1.1.16NodecentreCOM-AR310URouter
1.3.6.1.4.1.207.1.1.17NodecentreCOM-AR350Router
1.3.6.1.4.1.207.1.1.18NodecentreCOM-AR370Router
1.3.6.1.4.1.207.1.1.19NodecentreCOM-AR330Router
1.3.6.1.4.1.207.1.1.20NodecentreCOM-AR395Router
1.3.6.1.4.1.207.1.1.21NodecentreCOM-AR390Router
1.3.6.1.4.1.207.1.1.22NodecentreCOM-AR370URouter
1.3.6.1.4.1.207.1.1.23NodecentreCOM-AR740Router
1.3.6.1.4.1.207.1.1.24NodecentreCOM-AR140SRouter
1.3.6.1.4.1.207.1.1.25NodecentreCOM-AR140URouter
1.3.6.1.4.1.207.1.1.26NodecentreCOM-AR320Router
1.3.6.1.4.1.207.1.1.27NodecentreCOM-AR130SRouter
1.3.6.1.4.1.207.1.1.28NodecentreCOM-AR130URouter
1.3.6.1.4.1.207.1.1.29NodecentreCOM-AR160Router
1.3.6.1.4.1.207.1.1.43Nodeat-AR740RouterDC
1.3.6.1.4.1.207.1.1.44NodecentreCOM-AR120Router
1.3.6.1.4.1.207.1.1.47Nodeat-AR410Router
1.3.6.1.4.1.207.1.1.48Nodeat-AR725Router
1.3.6.1.4.1.207.1.1.49Nodeat-AR745Router
1.3.6.1.4.1.207.1.1.50Nodeat-AR410v2Router
1.3.6.1.4.1.207.1.1.51Nodeat-AR410v3Router
1.3.6.1.4.1.207.1.1.52Nodeat-AR725RouterDC
1.3.6.1.4.1.207.1.1.53Nodeat-AR745RouterDC
1.3.6.1.4.1.207.1.1.54Nodeat-AR450Router
1.3.6.1.4.1.207.1.1.55Nodeat-AR450DualRouter
1.3.6.1.4.1.207.1.1.59Nodeat-AR440Router
1.3.6.1.4.1.207.1.1.60Nodeat-AR441Router
1.3.6.1.4.1.207.1.1.61Nodeat-AR442Router
1.3.6.1.4.1.207.1.1.62Nodeat-AR443Router
1.3.6.1.4.1.207.1.1.63Nodeat-AR444Router
1.3.6.1.4.1.207.1.1.64Nodeat-AR420Router
1.3.6.1.4.1.207.1.1.73Nodeat-AR550Router
1.3.6.1.4.1.207.1.1.74Nodeat-AR551Router
1.3.6.1.4.1.207.1.1.75Nodeat-AR552Router
1.3.6.1.4.1.207.1.14NoderouterSwitch
1.3.6.1.4.1.207.1.14.1Nodeat-Rapier24
1.3.6.1.4.1.207.1.14.2Nodeat-Rapier16fSC
1.3.6.1.4.1.207.1.14.3Nodeat-Rapier16fVF
1.3.6.1.4.1.207.1.14.4Nodeat-Rapier16fMT
1.3.6.1.4.1.207.1.14.5Nodeat-Rapier48
1.3.6.1.4.1.207.1.14.6Nodeat-Rapier8t8fSC
1.3.6.1.4.1.207.1.14.7Nodeat-Rapier8t8fSCi
1.3.6.1.4.1.207.1.14.8Nodeat-Rapier8t8fMT
1.3.6.1.4.1.207.1.14.9Nodeat-Rapier8t8fMTi
1.3.6.1.4.1.207.1.14.10Nodeat-Rapier8fSC
1.3.6.1.4.1.207.1.14.11Nodeat-Rapier8fSCi
1.3.6.1.4.1.207.1.14.12Nodeat-Rapier8fMT
1.3.6.1.4.1.207.1.14.13Nodeat-Rapier8fMTi
1.3.6.1.4.1.207.1.14.14Nodeat-Rapier16fMTi
1.3.6.1.4.1.207.1.14.15Nodeat-RapierG6
1.3.6.1.4.1.207.1.14.16Nodeat-RapierG6SX
1.3.6.1.4.1.207.1.14.17Nodeat-RapierG6LX
1.3.6.1.4.1.207.1.14.18Nodeat-RapierG6MT
1.3.6.1.4.1.207.1.14.19Nodeat-Rapier16fSCi
1.3.6.1.4.1.207.1.14.20Nodeat-Rapier24i
1.3.6.1.4.1.207.1.14.21Nodeat-Rapier48i
1.3.6.1.4.1.207.1.14.22Nodeat-Switchblade4AC
1.3.6.1.4.1.207.1.14.23Nodeat-Switchblade4DC
1.3.6.1.4.1.207.1.14.24Nodeat-Switchblade8AC
1.3.6.1.4.1.207.1.14.25Nodeat-Switchblade8DC
1.3.6.1.4.1.207.1.14.26Nodeat-9816GF
1.3.6.1.4.1.207.1.14.27Nodeat-9812TF
1.3.6.1.4.1.207.1.14.28Nodeat-9816GB
1.3.6.1.4.1.207.1.14.29Nodeat-9812T
1.3.6.1.4.1.207.1.14.30Nodeat-8724XL
1.3.6.1.4.1.207.1.14.31Nodeat-8748XL
1.3.6.1.4.1.207.1.14.32Nodeat-8724XLDC
1.3.6.1.4.1.207.1.14.33Nodeat-8748XLDC
1.3.6.1.4.1.207.1.14.34Nodeat-9816GB-DC
1.3.6.1.4.1.207.1.14.35Nodeat-9812T-DC
1.3.6.1.4.1.207.1.14.36Nodeat-8824
1.3.6.1.4.1.207.1.14.37Nodeat-8848
1.3.6.1.4.1.207.1.14.38Nodeat-8824-DC
1.3.6.1.4.1.207.1.14.39Nodeat-8848-DC
1.3.6.1.4.1.207.1.14.41Nodeat-8624XL-80
1.3.6.1.4.1.207.1.14.42Nodeat-8724XL-80
1.3.6.1.4.1.207.1.14.43Nodeat-8748XL-80
1.3.6.1.4.1.207.1.14.44Nodeat-8948EX
1.3.6.1.4.1.207.1.14.45Nodeat-8948MX
1.3.6.1.4.1.207.1.14.46Nodeat-8624T2M
1.3.6.1.4.1.207.1.14.47Nodeat-Rapier24i-DC-NEBS
1.3.6.1.4.1.207.1.14.48Nodeat-8724XL-DC-NEBS
1.3.6.1.4.1.207.1.14.49Nodeat-9924T
1.3.6.1.4.1.207.1.14.50Nodeat-9924SP
1.3.6.1.4.1.207.1.14.51Nodeat-9924T-4SP
1.3.6.1.4.1.207.1.14.53Nodeat-9924TEMC
1.3.6.1.4.1.207.1.14.55Nodeat-8724MLB
1.3.6.1.4.1.207.1.14.56Nodeat-8624POE
1.3.6.1.4.1.207.1.14.58Nodeat-86482SP
1.3.6.1.4.1.207.8NodemibObject
1.3.6.1.4.1.207.8.4NodebrouterMib
1.3.6.1.4.1.207.8.4.4NodeatRouter
1.3.6.1.4.1.207.8.4.4.1Nodeobjects
1.3.6.1.4.1.207.8.4.4.1.1Nodeboards
1.3.6.1.4.1.207.8.4.4.1.1.39NodepprIcmAr023
1.3.6.1.4.1.207.8.4.4.1.1.40NodepprIcmAr021s
1.3.6.1.4.1.207.8.4.4.1.1.41NodepprIcmAr022
1.3.6.1.4.1.207.8.4.4.1.1.45NodepprIcmAr025
1.3.6.1.4.1.207.8.4.4.1.1.46NodepprIcmAr024
1.3.6.1.4.1.207.8.4.4.1.1.49NodepprAr300
1.3.6.1.4.1.207.8.4.4.1.1.52NodepprAr300L
1.3.6.1.4.1.207.8.4.4.1.1.53NodepprAr310
1.3.6.1.4.1.207.8.4.4.1.1.54NodepprAr120
1.3.6.1.4.1.207.8.4.4.1.1.55NodepprAr300Lu
1.3.6.1.4.1.207.8.4.4.1.1.56NodepprAr300u
1.3.6.1.4.1.207.8.4.4.1.1.57NodepprAr310u
1.3.6.1.4.1.207.8.4.4.1.1.58NodepprAr350
1.3.6.1.4.1.207.8.4.4.1.1.59NodepprIcmAr021u
1.3.6.1.4.1.207.8.4.4.1.1.63NodepprAr720
1.3.6.1.4.1.207.8.4.4.1.1.67NodepprAr010
1.3.6.1.4.1.207.8.4.4.1.1.68NodepprAr012
1.3.6.1.4.1.207.8.4.4.1.1.69NodepprAr011
1.3.6.1.4.1.207.8.4.4.1.1.70NodepprAr370
1.3.6.1.4.1.207.8.4.4.1.1.71NodepprAr330
1.3.6.1.4.1.207.8.4.4.1.1.72NodepprAr395
1.3.6.1.4.1.207.8.4.4.1.1.73NodepprAr390
1.3.6.1.4.1.207.8.4.4.1.1.75NodepprAr370u
1.3.6.1.4.1.207.8.4.4.1.1.76NodepprIcmAr020
1.3.6.1.4.1.207.8.4.4.1.1.79NodepprAr740
1.3.6.1.4.1.207.8.4.4.1.1.80NodepprAr140s
1.3.6.1.4.1.207.8.4.4.1.1.81NodepprAr140u
1.3.6.1.4.1.207.8.4.4.1.1.82NodepprAr160su
1.3.6.1.4.1.207.8.4.4.1.1.83NodepprAr320
1.3.6.1.4.1.207.8.4.4.1.1.85NodepprAr130s
1.3.6.1.4.1.207.8.4.4.1.1.86NodepprAr130u
1.3.6.1.4.1.207.8.4.4.1.1.87NodepprRapier24
1.3.6.1.4.1.207.8.4.4.1.1.88NodepprNsm0404Pic
1.3.6.1.4.1.207.8.4.4.1.1.89NodepprA35SXSC
1.3.6.1.4.1.207.8.4.4.1.1.90NodepprA35LXSC
1.3.6.1.4.1.207.8.4.4.1.1.91NodepprA36MTRJ
1.3.6.1.4.1.207.8.4.4.1.1.92NodepprA37VF45
1.3.6.1.4.1.207.8.4.4.1.1.93NodepprA38LC
1.3.6.1.4.1.207.8.4.4.1.1.94NodepprA39Tx
1.3.6.1.4.1.207.8.4.4.1.1.95NodepprAr740DC
1.3.6.1.4.1.207.8.4.4.1.1.96NodepprNsm0418BRI
1.3.6.1.4.1.207.8.4.4.1.1.97NodepprRapier16fSC
1.3.6.1.4.1.207.8.4.4.1.1.98Nodeppr8624xl80
1.3.6.1.4.1.207.8.4.4.1.1.99NodepprRapier16fMT
1.3.6.1.4.1.207.8.4.4.1.1.100NodepprRapier16fMTi
1.3.6.1.4.1.207.8.4.4.1.1.101NodepprRapier8t8fSC
1.3.6.1.4.1.207.8.4.4.1.1.102NodepprRapier8t8fSCi
1.3.6.1.4.1.207.8.4.4.1.1.103NodepprRapier8t8fMT
1.3.6.1.4.1.207.8.4.4.1.1.104NodepprRapier8t8fMTi
1.3.6.1.4.1.207.8.4.4.1.1.105NodepprRapier8fSC
1.3.6.1.4.1.207.8.4.4.1.1.106NodepprRapier8fSCi
1.3.6.1.4.1.207.8.4.4.1.1.107NodepprRapier8fMT
1.3.6.1.4.1.207.8.4.4.1.1.108NodepprRapier8fMTi
1.3.6.1.4.1.207.8.4.4.1.1.110NodepprRapierG6
1.3.6.1.4.1.207.8.4.4.1.1.111NodepprRapierG6SX
1.3.6.1.4.1.207.8.4.4.1.1.112NodepprRapierG6LX
1.3.6.1.4.1.207.8.4.4.1.1.113NodepprRapierG6MT
1.3.6.1.4.1.207.8.4.4.1.1.114NodepprRapier16fSCi
1.3.6.1.4.1.207.8.4.4.1.1.115NodepprRapier24i
1.3.6.1.4.1.207.8.4.4.1.1.116NodepprAr824
1.3.6.1.4.1.207.8.4.4.1.1.117NodepprAr816fSC
1.3.6.1.4.1.207.8.4.4.1.1.118NodepprAr816fSCi
1.3.6.1.4.1.207.8.4.4.1.1.119NodepprAr816fMT
1.3.6.1.4.1.207.8.4.4.1.1.120NodepprAr816fMTi
1.3.6.1.4.1.207.8.4.4.1.1.121NodepprAr88t8fSC
1.3.6.1.4.1.207.8.4.4.1.1.122NodepprAr88t8fSCi
1.3.6.1.4.1.207.8.4.4.1.1.123NodepprAr88t8fMT
1.3.6.1.4.1.207.8.4.4.1.1.124NodepprAr88t8fMTi
1.3.6.1.4.1.207.8.4.4.1.1.125NodepprAr88fSC
1.3.6.1.4.1.207.8.4.4.1.1.126NodepprAr88fSCi
1.3.6.1.4.1.207.8.4.4.1.1.127NodepprAr88fMT
1.3.6.1.4.1.207.8.4.4.1.1.128NodepprAr88fMTi
1.3.6.1.4.1.207.8.4.4.1.1.129NodepprAr824i
1.3.6.1.4.1.207.8.4.4.1.1.130NodepprAt8724XL
1.3.6.1.4.1.207.8.4.4.1.1.131NodepprAt8748XL
1.3.6.1.4.1.207.8.4.4.1.1.132NodepprAt8724XLDC
1.3.6.1.4.1.207.8.4.4.1.1.133NodepprAt8748XLDC
1.3.6.1.4.1.207.8.4.4.1.1.134NodepprAt8824
1.3.6.1.4.1.207.8.4.4.1.1.135NodepprAt8824DC
1.3.6.1.4.1.207.8.4.4.1.1.141Nodeppr8724XLDC
1.3.6.1.4.1.207.8.4.4.1.1.142Nodeppr8748XLDC
1.3.6.1.4.1.207.8.4.4.1.1.144NodepprRapier24iDC-NEBS
1.3.6.1.4.1.207.8.4.4.1.1.146NodepprAt8724XLDC-NEBS
1.3.6.1.4.1.207.8.4.4.1.1.147NodepprAt8848DC
1.3.6.1.4.1.207.8.4.4.1.1.148NodepprRapier48
1.3.6.1.4.1.207.8.4.4.1.1.149NodepprAt8848
1.3.6.1.4.1.207.8.4.4.1.1.150NodepprRapier48i
1.3.6.1.4.1.207.8.4.4.1.1.151NodepprNsm0424BRI
1.3.6.1.4.1.207.8.4.4.1.1.153NodepprIcmAR026
1.3.6.1.4.1.207.8.4.4.1.1.157Nodeppr9816GF
1.3.6.1.4.1.207.8.4.4.1.1.158Nodeppr9812TF
1.3.6.1.4.1.207.8.4.4.1.1.159NodepprSbChassis4AC
1.3.6.1.4.1.207.8.4.4.1.1.160NodepprSbChassis4DC
1.3.6.1.4.1.207.8.4.4.1.1.161NodepprSbChassis8AC
1.3.6.1.4.1.207.8.4.4.1.1.162NodepprSbChassis8DC
1.3.6.1.4.1.207.8.4.4.1.1.163NodepprSbChassis16AC
1.3.6.1.4.1.207.8.4.4.1.1.164NodepprSbChassis16DC
1.3.6.1.4.1.207.8.4.4.1.1.165NodepprSbControl
1.3.6.1.4.1.207.8.4.4.1.1.166NodepprSbControlDTM
1.3.6.1.4.1.207.8.4.4.1.1.167NodepprSb48t
1.3.6.1.4.1.207.8.4.4.1.1.168NodepprSb96t
1.3.6.1.4.1.207.8.4.4.1.1.169NodepprSb32fSC
1.3.6.1.4.1.207.8.4.4.1.1.170NodepprSb32fMT
1.3.6.1.4.1.207.8.4.4.1.1.172NodepprSb8fRJ
1.3.6.1.4.1.207.8.4.4.1.1.173NodepprSb8fSXSC
1.3.6.1.4.1.207.8.4.4.1.1.174NodepprSb8fSXMT
1.3.6.1.4.1.207.8.4.4.1.1.175NodepprSb8fLXSC
1.3.6.1.4.1.207.8.4.4.1.1.176NodepprSb8fLXMT
1.3.6.1.4.1.207.8.4.4.1.1.177NodepprAr410
1.3.6.1.4.1.207.8.4.4.1.1.178NodepprA40SC
1.3.6.1.4.1.207.8.4.4.1.1.179NodepprA40MTRJ
1.3.6.1.4.1.207.8.4.4.1.1.180NodepprA41SC
1.3.6.1.4.1.207.8.4.4.1.1.181NodepprA41MTRJ
1.3.6.1.4.1.207.8.4.4.1.1.182NodepprAr725
1.3.6.1.4.1.207.8.4.4.1.1.183NodepprAr745
1.3.6.1.4.1.207.8.4.4.1.1.184NodepprSb8GBIC
1.3.6.1.4.1.207.8.4.4.1.1.185NodepprA42GBIC
1.3.6.1.4.1.207.8.4.4.1.1.186Nodeppr9816GB
1.3.6.1.4.1.207.8.4.4.1.1.187Nodeppr9812T
1.3.6.1.4.1.207.8.4.4.1.1.188NodepprNsm048DS3
1.3.6.1.4.1.207.8.4.4.1.1.191NodepprAr450
1.3.6.1.4.1.207.8.4.4.1.1.192NodepprAr450Dual
1.3.6.1.4.1.207.8.4.4.1.1.193NodepprSbExpander
1.3.6.1.4.1.207.8.4.4.1.1.194NodepprAr725DC
1.3.6.1.4.1.207.8.4.4.1.1.195NodepprAr745DC
1.3.6.1.4.1.207.8.4.4.1.1.196NodepprAr410v2
1.3.6.1.4.1.207.8.4.4.1.1.197NodepprAr410v3
1.3.6.1.4.1.207.8.4.4.1.1.198NodepprIcmAr027
1.3.6.1.4.1.207.8.4.4.1.1.202Nodeppr8948EX
1.3.6.1.4.1.207.8.4.4.1.1.203Nodeppr8948MX
1.3.6.1.4.1.207.8.4.4.1.1.204Nodeppr9816GBDC
1.3.6.1.4.1.207.8.4.4.1.1.205Nodeppr9812TDC
1.3.6.1.4.1.207.8.4.4.1.1.206NodepprIcmAr021v2s
1.3.6.1.4.1.207.8.4.4.1.1.207NodepprA50
1.3.6.1.4.1.207.8.4.4.1.1.208NodepprA51
1.3.6.1.4.1.207.8.4.4.1.1.209NodepprA52
1.3.6.1.4.1.207.8.4.4.1.1.210NodepprA53
1.3.6.1.4.1.207.8.4.4.1.1.212NodepprFanA01
1.3.6.1.4.1.207.8.4.4.1.1.213NodepprAtPwr01AC
1.3.6.1.4.1.207.8.4.4.1.1.214NodepprAtPwr01DC
1.3.6.1.4.1.207.8.4.4.1.1.215NodepprAtFan01
1.3.6.1.4.1.207.8.4.4.1.1.216NodepprSb24RJ
1.3.6.1.4.1.207.8.4.4.1.1.217NodepprSb1XFP
1.3.6.1.4.1.207.8.4.4.1.1.218Nodeppr9924T
1.3.6.1.4.1.207.8.4.4.1.1.219Nodeppr9924SP
1.3.6.1.4.1.207.8.4.4.1.1.220Nodeppr9924TEMC
1.3.6.1.4.1.207.8.4.4.1.1.221Nodeppr9924T4SP
1.3.6.1.4.1.207.8.4.4.1.1.227NodepprAR440
1.3.6.1.4.1.207.8.4.4.1.1.228NodepprAR441
1.3.6.1.4.1.207.8.4.4.1.1.229NodepprAR442
1.3.6.1.4.1.207.8.4.4.1.1.230NodepprAR443
1.3.6.1.4.1.207.8.4.4.1.1.231NodepprAR444
1.3.6.1.4.1.207.8.4.4.1.1.232NodepprAR420
1.3.6.1.4.1.207.8.4.4.1.1.239NodepprAt8624T2M
1.3.6.1.4.1.207.8.4.4.1.1.240NodepprA46Tx
1.3.6.1.4.1.207.8.4.4.1.1.241NodepprAR550
1.3.6.1.4.1.207.8.4.4.1.1.242NodepprAR551
1.3.6.1.4.1.207.8.4.4.1.1.243NodepprAR552
1.3.6.1.4.1.207.8.4.4.1.1.248NodepprC8724MLB
1.3.6.1.4.1.207.8.4.4.1.1.252NodepprAt86482SP
1.3.6.1.4.1.207.8.4.4.1.1.253NodepprAt8624POE
1.3.6.1.4.1.207.8.4.4.1.1.254NodepprAtPwr01RAC
1.3.6.1.4.1.207.8.4.4.1.1.255NodepprAtFan01R
1.3.6.1.4.1.207.8.4.4.1.1.264NodepprAtPwr02AC
1.3.6.1.4.1.207.8.4.4.1.1.265NodepprAtPwr02RAC
1.3.6.1.4.1.207.8.4.4.1.1.269NodepprSb24SFP
1.3.6.1.4.1.207.8.4.4.1.2Noderelease
1.3.6.1.4.1.207.8.4.4.1.3Nodeiftypes
1.3.6.1.4.1.207.8.4.4.1.3.1NodeifaceEth
1.3.6.1.4.1.207.8.4.4.1.3.2NodeifaceSyn
1.3.6.1.4.1.207.8.4.4.1.3.3NodeifaceAsyn
1.3.6.1.4.1.207.8.4.4.1.3.4NodeifaceBri
1.3.6.1.4.1.207.8.4.4.1.3.5NodeifacePri
1.3.6.1.4.1.207.8.4.4.1.3.6NodeifacePots
1.3.6.1.4.1.207.8.4.4.1.3.7NodeifaceGBIC
1.3.6.1.4.1.207.8.4.4.1.4Nodechips
1.3.6.1.4.1.207.8.4.4.1.4.1Nodechip68020Cpu
1.3.6.1.4.1.207.8.4.4.1.4.2Nodechip68340Cpu
1.3.6.1.4.1.207.8.4.4.1.4.3Nodechip68302Cpu
1.3.6.1.4.1.207.8.4.4.1.4.4Nodechip68360Cpu
1.3.6.1.4.1.207.8.4.4.1.4.5Nodechip860TCpu
1.3.6.1.4.1.207.8.4.4.1.4.21NodechipRtc1
1.3.6.1.4.1.207.8.4.4.1.4.22NodechipRtc2
1.3.6.1.4.1.207.8.4.4.1.4.23NodechipRtc3
1.3.6.1.4.1.207.8.4.4.1.4.24NodechipRtc4
1.3.6.1.4.1.207.8.4.4.1.4.31NodechipRam1mb
1.3.6.1.4.1.207.8.4.4.1.4.32NodechipRam2mb
1.3.6.1.4.1.207.8.4.4.1.4.33NodechipRam3mb
1.3.6.1.4.1.207.8.4.4.1.4.34NodechipRam4mb
1.3.6.1.4.1.207.8.4.4.1.4.36NodechipRam6mb
1.3.6.1.4.1.207.8.4.4.1.4.38NodechipRam8mb
1.3.6.1.4.1.207.8.4.4.1.4.42NodechipRam12mb
1.3.6.1.4.1.207.8.4.4.1.4.46NodechipRam16mb
1.3.6.1.4.1.207.8.4.4.1.4.50NodechipRam20mb
1.3.6.1.4.1.207.8.4.4.1.4.62NodechipRam32mb
1.3.6.1.4.1.207.8.4.4.1.4.71NodechipFlash1mb
1.3.6.1.4.1.207.8.4.4.1.4.72NodechipFlash2mb
1.3.6.1.4.1.207.8.4.4.1.4.73NodechipFlash3mb
1.3.6.1.4.1.207.8.4.4.1.4.74NodechipFlash4mb
1.3.6.1.4.1.207.8.4.4.1.4.76NodechipFlash6mb
1.3.6.1.4.1.207.8.4.4.1.4.78NodechipFlash8mb
1.3.6.1.4.1.207.8.4.4.1.4.120NodechipPem
1.3.6.1.4.1.207.8.4.4.2Nodetraps
1.3.6.1.4.1.207.8.4.4.3Nodesysinfo
1.3.6.1.4.1.207.8.4.4.3.1NodefanAndPs
1.3.6.1.4.1.207.8.4.4.3.1.1ScalarfanAndPsRpsConnectionStatusread-onlymandatoryThe status of the Redundant Power Supply (RPS) connection, ie, whether an RPS is actually connected or not, regardless of whether the RPS is on or not. not-sup…
1.3.6.1.4.1.207.8.4.4.3.1.1NodefanAndPsRpsConnectionTrapGenerated when the RPS connection status changes.
1.3.6.1.4.1.207.8.4.4.3.1.2ScalarfanAndPsMainPSUStatusread-onlymandatoryThe status of the main Power Supply. on means that the power supply is present and fully operational. off means that the power supply is totally off (and obvio…
1.3.6.1.4.1.207.8.4.4.3.1.2NodefanAndPsMainPSUStatusTrapGenerated when the main power supply status changes.
1.3.6.1.4.1.207.8.4.4.3.1.3ScalarfanAndPsRedundantPSUStatusread-onlymandatoryThe status of the redundant Power Supply. non-supported means this device does not support redundant power supplies, on means that the redundant power supply i…
1.3.6.1.4.1.207.8.4.4.3.1.3NodefanAndPsRedundantPSUStatusTrapGenerated when the RPS status changes.
1.3.6.1.4.1.207.8.4.4.3.1.4NodefanAndPsMainFanStatusTrapGenerated when the main fan changes status.
1.3.6.1.4.1.207.8.4.4.3.1.4ScalarfanAndPsRpsMonitoringStatusread-writemandatoryThe current status of redundant power supply monitoring. The monitoring of the redundant power supply and its fan must be enabled by command or by setting this…
1.3.6.1.4.1.207.8.4.4.3.1.5ScalarfanAndPsMainFanStatusread-onlymandatoryThe status of the main Power Supply fan. non-supported means that this device does not support monitoring on the main power supply fan, or that there is no mai…
1.3.6.1.4.1.207.8.4.4.3.1.5NodefanAndPsRedundantFanStatusTrapGenerated when the redundant fan changes status.
1.3.6.1.4.1.207.8.4.4.3.1.6ScalarfanAndPsRedundantFanStatusread-onlymandatoryThe status of the redundant Power Supply Fan. non-supported means this device does not support redundant power supplies, ok means that the redundant power supp…
1.3.6.1.4.1.207.8.4.4.3.1.6NodefanAndPsTemperatureStatusTrapGenerated when the temperature changes status.
1.3.6.1.4.1.207.8.4.4.3.1.7NodefanAndPsFanTrayPresentTrapGenerated when the fan tray presence status changes.
1.3.6.1.4.1.207.8.4.4.3.1.7ScalarfanAndPsTemperatureStatusread-onlymandatoryThe status of temperature in this device. ok means that the device is not capable of monitoring temperature or that the temperature is OK, not-ok means that th…
1.3.6.1.4.1.207.8.4.4.3.1.8ScalarfanAndPsFanTrayPresentread-onlymandatoryThe status of the presence of the fan tray in this system. Systems which do not support a fan tray return the value non-supported. Upon removal of the fan tray…
1.3.6.1.4.1.207.8.4.4.3.1.8NodefanAndPsFanTrayStatusTrapGenerated when the fan tray status changes.
1.3.6.1.4.1.207.8.4.4.3.1.9ScalarfanAndPsFanTrayStatusread-onlymandatoryThe status of the fan tray in this system. Systems which do not support a fan tray return the value non-supported. The value ok is returned if all fans in the …
1.3.6.1.4.1.207.8.4.4.3.1.9NodefanAndPsMainMonitoringStatusTrapGenerated when the main power supply monitoring status changes.
1.3.6.1.4.1.207.8.4.4.3.1.10NodefanAndPsAccelFanStatusTrapGenerated when the accelerator fans' status changes.
1.3.6.1.4.1.207.8.4.4.3.1.10ScalarfanAndPsMainMonitoringStatusread-onlymandatoryThe current status of main power supply monitoring. The monitoring of the main power supply and its fan is always enabled by those systems that support it. Sys…
1.3.6.1.4.1.207.8.4.4.3.1.11TablefanAndPsPsuStatusTablenot-accessiblemandatoryThe table of AT8948 fanAndPsPsuStatusTable. Each entry in the table represents the status of one of the power supplies in AT8948 system. Each power supply has …
1.3.6.1.4.1.207.8.4.4.3.1.11.1RowfanAndPsPsuStatusEntrynot-accessiblemandatoryA single entry of AT8948 fanAndPsPsuStatusTable, indexed by fanAndPsPsuNumber field.
1.3.6.1.4.1.207.8.4.4.3.1.11.1.1ColumnfanAndPsPsuNumberread-onlymandatoryThe PSU board identity for which this entry holds. If the system consists only of a single PSU board, only one entry will appear in the table, whose index is 1.
1.3.6.1.4.1.207.8.4.4.3.1.11.1.2ColumnfanAndPsPsuPresentread-onlymandatoryThe PSU present state, displayed as 'yes' if present, or 'no' if absent.
1.3.6.1.4.1.207.8.4.4.3.1.11.1.3ColumnfanAndPsPsuTyperead-onlymandatoryThe PSU type, displayed as AC, or DC, or FAN, or NOT PRESENT.
1.3.6.1.4.1.207.8.4.4.3.1.11.1.4ColumnfanAndPsPsuFanread-onlymandatoryThe PSU fan status, displayed as OK, or FAIL, or NOT PRESENT.
1.3.6.1.4.1.207.8.4.4.3.1.11.1.5ColumnfanAndPsPsuTemperatureread-onlymandatoryThe PSU temperature, displayed as GOOD, or HIGH, or NOT PRESENT, or NOT SUPPORTED.
1.3.6.1.4.1.207.8.4.4.3.1.11.1.6ColumnfanAndPsPsuPowerread-onlymandatoryThe PSU power status, displayed as GOOD, or BAD, or NOT PRESENT or NOT SUPPORTED.
1.3.6.1.4.1.207.8.4.4.3.1.12ScalarfanAndPsAccelFanStatusread-onlymandatoryThe status of the accelerator card fans. Non-supported means this device does not support monitoring of the accelerator card fans.
1.3.6.1.4.1.207.8.4.4.3.2Scalarrestartwrite-onlymandatoryA router/switch restart request. A management station can remotely instruct an ATI router/switch to action a warm or cold restart. Once all the appropriate int…
1.3.6.1.4.1.207.8.4.4.3.3Nodecpu
1.3.6.1.4.1.207.8.4.4.3.3.1ScalarcpuUtilisationMaxread-onlymandatoryMaximum CPU utilisation since the router was last restarted. Expressed as a percentage.
1.3.6.1.4.1.207.8.4.4.3.3.2ScalarcpuUtilisationAvgread-onlymandatoryAverage CPU utilisation since the router was last restarted. Expressed as a percentage.
1.3.6.1.4.1.207.8.4.4.3.3.3ScalarcpuUtilisationAvgLastMinuteread-onlymandatoryAverage CPU utilisation over the past minute. Expressed as a percentage.
1.3.6.1.4.1.207.8.4.4.3.3.4ScalarcpuUtilisationAvgLast10Secondsread-onlymandatoryAverage CPU utilisation over the past ten seconds. Expressed as a percentage.
1.3.6.1.4.1.207.8.4.4.3.3.5ScalarcpuUtilisationAvgLastSecondread-onlymandatoryAverage CPU utilisation over the past second. Expressed as a percentage.
1.3.6.1.4.1.207.8.4.4.3.3.6ScalarcpuUtilisationMaxLast5Minutesread-onlymandatoryMaximum CPU utilisation over the last 5 minutes. Expressed as a percentage.
1.3.6.1.4.1.207.8.4.4.3.3.7ScalarcpuUtilisationAvgLast5Minutesread-onlymandatoryAverage CPU utilisation over the past 5 minutes. Expressed as a percentage.
1.3.6.1.4.1.207.8.4.4.3.4NodesysTemperature
1.3.6.1.4.1.207.8.4.4.3.4.1NodegeneralTemperature
1.3.6.1.4.1.207.8.4.4.3.4.1.1NodegeneralTemperatureStatusTrapGenerated when the temperature status of the device changes.
1.3.6.1.4.1.207.8.4.4.3.4.1.1ScalargeneralTemperatureSupportedread-onlymandatoryThe value supported indicates general temperature is displayed by the device. The value not-supported indicates the device displays specific temperature inform…
1.3.6.1.4.1.207.8.4.4.3.4.1.2ScalargeneralTemperatureActualTempread-onlymandatoryThe current temperature of product's base board, in degrees Celsius. A device which doesn't support this group will return the value 0 for this variable.
1.3.6.1.4.1.207.8.4.4.3.4.1.3ScalargeneralTemperatureStatusread-onlymandatoryThe status of temperature in this device. ok indicates the temperature is below the threshold temperature or the device is not capable of monitoring temperatur…
1.3.6.1.4.1.207.8.4.4.3.4.1.4ScalargeneralTemperatureThresholdread-writemandatoryThe temperature threshold for the device. If the temperature of the device rises above this threshold generalTemeratureStatus will indicate a not-ok status.
1.3.6.1.4.1.207.8.4.4.3.4.2NodesbTemperature
1.3.6.1.4.1.207.8.4.4.3.4.2.1NodesbTempFixedThresholdTrapTrap occurs when fixed threshold status changes. The actual temperature and the fixed threshold are also given.
1.3.6.1.4.1.207.8.4.4.3.4.2.1TablesbTempTablenot-accessiblemandatoryThe table of SwitchBlade sysTemperature. Each entry in the table represents temperature monitoring from one of the CPU cards which may be present in the Switch…
1.3.6.1.4.1.207.8.4.4.3.4.2.1.1RowsbTempEntrynot-accessiblemandatoryA single entry of SwitchBlade sysTemperature
1.3.6.1.4.1.207.8.4.4.3.4.2.1.1.1ColumnsbTempIndexread-onlymandatoryThe board for which this temperature entry holds. If the system consists only of a single CPU board, only one entry will appear in the table, whose index is ma…
1.3.6.1.4.1.207.8.4.4.3.4.2.1.1.2ColumnsbTempActualTemperatureread-onlymandatoryThe actual SwitchBlade temperature. This temperature is measured within the SwitchBlade CPU, and is sampled at 1 second intervals.
1.3.6.1.4.1.207.8.4.4.3.4.2.1.1.3ColumnsbTempFixedThresholdStatusread-onlymandatoryThe temperature status with regard to the fixed temperature threshold. The value of the fixed temperature threshold is set at 90 degrees C. This variable repre…
1.3.6.1.4.1.207.8.4.4.3.4.2.1.1.4ColumnsbTempSettableThresholdStatusread-onlymandatoryThe temperature status with regard to the settable temperature threshold. The value of the settable temperature threshold is set by management intervention. Th…
1.3.6.1.4.1.207.8.4.4.3.4.2.1.1.5ColumnsbTempSettableThresholdread-writemandatoryThe value of the settable temperature threshold. This can be set independently for each temperature entry. The value of this threshold is only valid when sbTem…
1.3.6.1.4.1.207.8.4.4.3.4.2.2ScalarsbTempFixedThresholdread-onlymandatoryThe value of the fixed temperature threshold. This value is fixed for both CPU cards, and cannot be set.
1.3.6.1.4.1.207.8.4.4.3.4.2.2NodesbTempSettableThresholdTrapTrap occurs when settable threshold status changes. The actual temperature and the settable threshold are also given.
1.3.6.1.4.1.207.8.4.4.3.4.3NodeacceleratorTemperature
1.3.6.1.4.1.207.8.4.4.3.4.3.1NodeacceleratorTemperatureStatusTrapGenerated when the temperature status of the device changes.
1.3.6.1.4.1.207.8.4.4.3.4.3.1ScalaracceleratorTemperatureSupportedread-onlymandatoryThe value supported indicates whether accelerator card temperature is displayed by the device. The value not-supported indicates the device does not display sp…
1.3.6.1.4.1.207.8.4.4.3.4.3.2ScalaracceleratorTemperatureActualTempread-onlymandatoryThe current temperature of product's base board, in degrees Celsius. A device which doesn't support this group will return the value 0 for this variable.
1.3.6.1.4.1.207.8.4.4.3.4.3.3ScalaracceleratorTemperatureStatusread-onlymandatoryThe status of temperature in this device. ok indicates the temperature is below the threshold temperature or the device is not capable of monitoring temperatur…
1.3.6.1.4.1.207.8.4.4.3.4.3.4ScalaracceleratorTemperatureThresholdread-writemandatoryThe temperature threshold for the device. If the temperature of the device rises above this threshold generalTemeratureStatus will indicate a not-ok status.
1.3.6.1.4.1.207.8.4.4.3.5ScalaratContactDetailsread-onlymandatoryThe contact details for Allied Telesyn inc.
1.3.6.1.4.1.207.8.4.4.3.6NodebbrNvs
1.3.6.1.4.1.207.8.4.4.3.6.1NodebbrNvsReinitialiseTrapGenerated at boot when the device detects that the BBR has been corrupted and reinitialised. This can happen if the device's BBR battery has run down, and the …
1.3.6.1.4.1.207.8.4.4.3.7Nodememory
1.3.6.1.4.1.207.8.4.4.3.7.1ScalarfreeMemoryread-onlymandatoryPercentage of free memory still available on device
1.3.6.1.4.1.207.8.4.4.3.7.2ScalartotalBuffersread-onlymandatoryTotal number of buffers available on device
1.3.6.1.4.1.207.8.4.4.3.8ScalarrealTimeClockStatusread-onlymandatoryShows the status of the real time clock
1.3.6.1.4.1.207.8.4.4.3.9ScalarhostIdread-writemandatoryHost Identifier of this device
1.3.6.1.4.1.207.8.4.4.4Nodemodules
1.3.6.1.4.1.207.8.4.4.4.23Nodeethernet
1.3.6.1.4.1.207.8.4.4.4.23.1TableethIntTablenot-accessiblemandatoryThe table of Ethernet interfaces.
1.3.6.1.4.1.207.8.4.4.4.23.1.1RowethIntEntrynot-accessiblemandatoryA single entry in the Ethernet interfaces table.
1.3.6.1.4.1.207.8.4.4.4.23.1.1.1ColumnethIntIndexread-onlymandatoryThe ifIndex of the Ethernet interface.
1.3.6.1.4.1.207.8.4.4.4.23.1.1.2ColumnethIntBoardIndexread-onlymandatoryThe index in the arBoardTable of the board on which this Ethernet interface resides. If this Ethernet interface is not found, the value of this object is 0.
1.3.6.1.4.1.207.8.4.4.4.23.1.1.3ColumnethIntBoardPositionread-onlymandatoryThe position on this Ethernet interface's board of this Ethernet interface. If this Ethernet interface is not found, the value of this object is 0.
1.3.6.1.4.1.207.8.4.4.4.23.1.1.4ColumnethIntDuplexModeread-onlymandatoryThe duplex mode of this Ethernet interface. The value unknown is returned when the interface cannot or has not yet made a determination of its duplex mode, or …
1.3.6.1.4.1.207.8.4.4.4.31Nodeflash
1.3.6.1.4.1.207.8.4.4.4.31.1NodeflashFailureTrapA flash failure trap is generated when any of the above flash counter is incremented and the failure type is sent in the trap.
1.3.6.1.4.1.207.8.4.4.4.31.1ScalarflashGetFailureread-onlymandatoryThe number of flash get operations that have failed.
1.3.6.1.4.1.207.8.4.4.4.31.2ScalarflashOpenFailureread-onlymandatoryThe number of flash open operations that have failed.
1.3.6.1.4.1.207.8.4.4.4.31.3ScalarflashReadFailureread-onlymandatoryThe number of flash read operations that have failed.
1.3.6.1.4.1.207.8.4.4.4.31.4ScalarflashCloseFailureread-onlymandatoryThe number of flash close operations that have failed.
1.3.6.1.4.1.207.8.4.4.4.31.5ScalarflashCompleteFailureread-onlymandatoryThe number of flash complete operations that have failed.
1.3.6.1.4.1.207.8.4.4.4.31.6ScalarflashWriteFailureread-onlymandatoryThe number of flash write operations that have failed.
1.3.6.1.4.1.207.8.4.4.4.31.7ScalarflashCreateFailureread-onlymandatoryThe number of flash create operations that have failed.
1.3.6.1.4.1.207.8.4.4.4.31.8ScalarflashPutFailureread-onlymandatoryThe number of flash put operations that have failed.
1.3.6.1.4.1.207.8.4.4.4.31.9ScalarflashDeleteFailureread-onlymandatoryThe number of flash delete operations that have failed.
1.3.6.1.4.1.207.8.4.4.4.31.10ScalarflashCheckFailureread-onlymandatoryThe number of flash check operations that have failed.
1.3.6.1.4.1.207.8.4.4.4.31.11ScalarflashEraseFailureread-onlymandatoryThe number of flash erase operations that have failed.
1.3.6.1.4.1.207.8.4.4.4.31.12ScalarflashCompactFailureread-onlymandatoryThe number of flash compaction operations that have failed.
1.3.6.1.4.1.207.8.4.4.4.31.13ScalarflashVerifyFailureread-onlymandatoryThe number of flash verify operations that have failed.
1.3.6.1.4.1.207.8.4.4.4.37Nodecc
1.3.6.1.4.1.207.8.4.4.4.37.1TableccDetailsTablenot-accessiblemandatoryThe table of call details parameters.
1.3.6.1.4.1.207.8.4.4.4.37.1.1RowccDetailsEntrynot-accessiblemandatoryA single entry of ISDN call details. This contains the parameters of a single ISDN call details.
1.3.6.1.4.1.207.8.4.4.4.37.1.1.1ColumnccDetailsIndexread-onlymandatoryThe index of the call details entry in the call details table. When an entry is created in this table, the index does not have to be written. However, to refer…
1.3.6.1.4.1.207.8.4.4.4.37.1.1.2ColumnccDetailsNameread-writemandatoryThe name of the ISDN call details. This must be unique for all ISDN call details, when comparisons are done ignoring the case of letters. Valid characters in t…
1.3.6.1.4.1.207.8.4.4.4.37.1.1.3ColumnccDetailsRemoteNameread-writemandatoryThe remote ISDN call name. This name can be referenced by certain other call details parameters related with setting up the Q.931 SETUP message for outgoing ca…
1.3.6.1.4.1.207.8.4.4.4.37.1.1.4ColumnccDetailsCalledNumberread-writemandatoryThe number called when this call details is activated. The number should include all telephone network access codes, country codes and area codes required to m…
1.3.6.1.4.1.207.8.4.4.4.37.1.1.5ColumnccDetailsCallingNumberread-writemandatoryThe number used as the calling number when this call is activated. The calling number can optionally be placed in the outgoing SETUP message.
1.3.6.1.4.1.207.8.4.4.4.37.1.1.6ColumnccDetailsAlternateNumberread-writemandatoryThe number called when all retries with the main called number have failed. In this event, the router tries once with the alternate number, then checks the ccD…
1.3.6.1.4.1.207.8.4.4.4.37.1.1.7ColumnccDetailsEnabledread-writemandatoryWhether this ISDN call is enabled or disabled for incoming and outgoing calls. If the call details entry is disabled, all existing active calls based on this c…
1.3.6.1.4.1.207.8.4.4.4.37.1.1.8ColumnccDetailsDirectionread-writemandatoryThe direction for which calls may be made or received using this call details entry.
1.3.6.1.4.1.207.8.4.4.4.37.1.1.9ColumnccDetailsPrecedenceread-writemandatoryThe precedence of this call details entry in the event of call collision. Call collision occurs when an incoming call for a given details entry is detected whi…
1.3.6.1.4.1.207.8.4.4.4.37.1.1.10ColumnccDetailsHoldupTimeread-writemandatoryThe time, in seconds, that active calls created from this call details should be held up after initial activation. The call will be held up for at least this t…
1.3.6.1.4.1.207.8.4.4.4.37.1.1.11ColumnccDetailsPreferredIfIndexread-writemandatoryThe ifIndex of an ISDN interface on this router which is the preferred ISDN interface on which to make an outgoing call using this call details entry. The ifIn…
1.3.6.1.4.1.207.8.4.4.4.37.1.1.12ColumnccDetailsRequiredIfIndexread-writemandatoryThe ifIndex of an ISDN interface on this router which is the required ISDN interface on which to make an outgoing call using this call details entry. The ifInd…
1.3.6.1.4.1.207.8.4.4.4.37.1.1.13ColumnccDetailsPriorityread-writemandatoryThe priority of calls generated from this call details entry. The priority determines whether calls can be bumped for higher priority calls. The value of prior…
1.3.6.1.4.1.207.8.4.4.4.37.1.1.14ColumnccDetailsRetryT1read-writemandatoryThe time in seconds between retries of calls generated from this call details entry.
1.3.6.1.4.1.207.8.4.4.4.37.1.1.15ColumnccDetailsRetryN1read-writemandatoryThe number of retries in a retry group for calls generated from this call details entry. Note that the default value means that by default the call will not be…
1.3.6.1.4.1.207.8.4.4.4.37.1.1.16ColumnccDetailsRetryT2read-writemandatoryThe time in seconds between retry groups for retries of calls generated from this call details entry.
1.3.6.1.4.1.207.8.4.4.4.37.1.1.17ColumnccDetailsRetryN2read-writemandatoryThe number of retry groups for calls generated from this call details entry. Note that the default value means that by default no retry groups will be attempte…
1.3.6.1.4.1.207.8.4.4.4.37.1.1.18ColumnccDetailsKeepupread-writemandatoryA flag indicating whether calls generated from this call details entry should be kept up always. Inspection of this flag takes place when a call is cleared fro…
1.3.6.1.4.1.207.8.4.4.4.37.1.1.19ColumnccDetailsOutSetupCliread-writemandatoryThe CLI information placed into outgoing SETUP messages when this call details is used to generate an outgoing call. The value 'off' means that no CLI informat…
1.3.6.1.4.1.207.8.4.4.4.37.1.1.20ColumnccDetailsOutSetupUserread-writemandatoryThe user-user information placed into outgoing SETUP messages when this call details is used to generate an outgoing call. The value 'off' means that no user-u…
1.3.6.1.4.1.207.8.4.4.4.37.1.1.21ColumnccDetailsOutSetupCalledSubread-writemandatoryThe called subaddress information placed into outgoing SETUP messages when this call details is used to generate an outgoing call. The value 'off' means that n…
1.3.6.1.4.1.207.8.4.4.4.37.1.1.22ColumnccDetailsOutSubaddressread-writemandatoryThis object gives a way to override the called subaddress information placed into outgoing SETUP messages when this call details is used to generate an outgoin…
1.3.6.1.4.1.207.8.4.4.4.37.1.1.23ColumnccDetailsCallbackread-writemandatoryA flag indicating whether or not to call back the caller when an incoming call is generated from this call details entry. If set to 'yes', the incoming call wi…
1.3.6.1.4.1.207.8.4.4.4.37.1.1.24ColumnccDetailsCallbackDelayread-writemandatoryThe time, in tenths of a second, which the router will wait after clearing an incoming call whose call details entry specified that the caller should be called…
1.3.6.1.4.1.207.8.4.4.4.37.1.1.25ColumnccDetailsInSetupCalledSubSearchread-writemandatoryDetermines whether this call details entry is used in a search of call details for an incoming call based on the contents of the called subaddress information …
1.3.6.1.4.1.207.8.4.4.4.37.1.1.26ColumnccDetailsInSetupUserSearchread-writemandatoryDetermines whether this call details entry is used in a search of call details for an incoming call based on the contents of the user-user information in the i…
1.3.6.1.4.1.207.8.4.4.4.37.1.1.27ColumnccDetailsInSetupCliSearchread-writemandatoryDetermines whether this call details entry is used in a search of call details for an incoming call based on the contents of the calling number information in …
1.3.6.1.4.1.207.8.4.4.4.37.1.1.28ColumnccDetailsInSetupCliSearchListread-writemandatoryIf the ccDetailsInSetupCliSearch object is set to 'list', this object gives the index of the CLI list to search. The value of CLI list indices is 1..100. The v…
1.3.6.1.4.1.207.8.4.4.4.37.1.1.29ColumnccDetailsInAnyFlagread-writemandatoryDetermines whether this call details entry will match any incoming call. After all searched for incoming calls have been carried out based on called subaddress…
1.3.6.1.4.1.207.8.4.4.4.37.1.1.30ColumnccDetailsInSetupCalledSubCheckread-writemandatoryDetermines whether to perform a check when an incoming call matches this call details entry based on the contents of the called subaddress information in the i…
1.3.6.1.4.1.207.8.4.4.4.37.1.1.31ColumnccDetailsInSetupUserCheckread-writemandatoryDetermines whether to perform a check when an incoming call matches this call details entry based on the contents of the user-user information in the incoming …
1.3.6.1.4.1.207.8.4.4.4.37.1.1.32ColumnccDetailsInSetupCliCheckread-writemandatoryDetermines whether to perform a check and which check to perform when an incoming call matches this call details entry based on the contents of the calling num…
1.3.6.1.4.1.207.8.4.4.4.37.1.1.33ColumnccDetailsInSetupCliCheckListread-writemandatoryIf the ccDetailsInSetupCliCheck object is set to 'present' or 'required', this object gives the index of the CLI list to check against. The value of CLI list i…
1.3.6.1.4.1.207.8.4.4.4.37.1.1.34ColumnccDetailsUserTyperead-writemandatoryThe type of user of this call. The value 'attach' means that users have to attach to this call before the call can be used for outgoing or incoming calls. The …
1.3.6.1.4.1.207.8.4.4.4.37.1.1.35ColumnccDetailsLoginTyperead-writemandatoryThe type of login for calls generated using this call details entry, for incoming calls only. Incoming calls can be configured to go through a logging in phase…
1.3.6.1.4.1.207.8.4.4.4.37.1.1.36ColumnccDetailsUsernameread-writemandatoryThe source of the username when the ccDetailsLoginType object has a value of 'userdb', 'radius', 'tacacs' or 'all'. The value 'none' means no username is defin…
1.3.6.1.4.1.207.8.4.4.4.37.1.1.37ColumnccDetailsPasswordread-writemandatoryThe source of the password when the ccDetailsLoginType object has a value of 'userdb', 'radius', 'tacacs' or 'all'. The value 'none' means no password is defin…
1.3.6.1.4.1.207.8.4.4.4.37.1.1.38ColumnccDetailsBumpDelayread-writemandatoryThe time, in tenths of a second, which the router will wait after clearing an existing call which has been bumped to make way for a call based on this call det…
1.3.6.1.4.1.207.8.4.4.4.37.1.1.39ColumnccDetailsDataRateread-writemandatoryThe data rate to use for active calls based on this call details entry. The actual data rate for outgoing calls is determined by both this object and the data …
1.3.6.1.4.1.207.8.4.4.4.37.1.1.40ColumnccDetailsPppTemplateread-writemandatoryThe PPP template to use when creating dynamic PPP interfaces for calls generated from this call details entry. The value 33 represents a default PPP template, …
1.3.6.1.4.1.207.8.4.4.4.37.1.1.41ColumnccDetailsUserModuleread-onlymandatoryThe module ID of the user module currently attached to this ISDN call details entry.
1.3.6.1.4.1.207.8.4.4.4.37.1.1.42ColumnccDetailsNumberAttachmentsread-onlymandatoryThe number of attachments from the user module currently attached to this call details entry. The ccAttachmentsTable gives the actual attachments for each call…
1.3.6.1.4.1.207.8.4.4.4.37.2TableccCliListTablenot-accessiblemandatoryThe table of CLI list entries.
1.3.6.1.4.1.207.8.4.4.4.37.2.1RowccCliListEntrynot-accessiblemandatoryA single entry in the CLI list table. This contains a single number, as well as index information.
1.3.6.1.4.1.207.8.4.4.4.37.2.1.1ColumnccCliListListIndexread-onlymandatoryThe index of the CLI list. CLI lists from 1 to 100 are defined in the router.
1.3.6.1.4.1.207.8.4.4.4.37.2.1.2ColumnccCliListEntryIndexread-onlymandatoryThe index of the CLI list entry within the CLI list. The minimum CLI list entry is 1. CLI lists are unlimited in length, although internal memory requirements …
1.3.6.1.4.1.207.8.4.4.4.37.2.1.3ColumnccCliListNumberread-writemandatoryThe number for this CLI list entry. Setting the number to a zero length string removes the entry from the CLI list, with consequent reshuffling of CLI entry in…
1.3.6.1.4.1.207.8.4.4.4.37.3TableccActiveCallTablenot-accessiblemandatoryThe table of ISDN active calls.
1.3.6.1.4.1.207.8.4.4.4.37.3.1RowccActiveCallEntrynot-accessiblemandatoryA single entry in the active call table.
1.3.6.1.4.1.207.8.4.4.4.37.3.1.1ColumnccActiveCallIndexread-onlymandatoryThe index of the active call. There are 128 possible active calls in the router simultaneously.
1.3.6.1.4.1.207.8.4.4.4.37.3.1.2ColumnccActiveCallDetailsIndexread-onlymandatoryThe index of the call details entry which generated this active call. Thus the index into the ccDetailsTable for this call.
1.3.6.1.4.1.207.8.4.4.4.37.3.1.3ColumnccActiveCallIfIndexread-onlymandatoryThe interface index of the interface on which this active call is being made or received. A value of zero indicates that the active has not yet had an interfac…
1.3.6.1.4.1.207.8.4.4.4.37.3.1.4ColumnccActiveCallDataRateread-onlymandatoryThe data rate in use for this active call. This is determined by the call details setting of data rate, the ISDN interface setting for data rate, and the conte…
1.3.6.1.4.1.207.8.4.4.4.37.3.1.5ColumnccActiveCallStateread-onlymandatoryThe state of this active call. The value 'null' indicates that this active call does not actually exist, in other words it is in the process of being created o…
1.3.6.1.4.1.207.8.4.4.4.37.3.1.6ColumnccActiveCallDirectionread-onlymandatoryThe direction of this active call. The value 'in' indicates that this active call is an incoming call, the value 'out' indicates that the active call is an out…
1.3.6.1.4.1.207.8.4.4.4.37.3.1.7ColumnccActiveCallUserModuleread-onlymandatoryThe module ID of the user module attached to this ISDN active call.
1.3.6.1.4.1.207.8.4.4.4.37.3.1.8ColumnccActiveCallUserInstanceread-onlymandatoryThe instance of the user module attached to this ISDN active call.
1.3.6.1.4.1.207.8.4.4.4.37.3.1.9ColumnccActiveCallBchannelIndexread-onlymandatoryThe B channel number for this active entry. BRI interfaces have B channels in the range 1..2, PRI interfaces have B channels in the range 1..31, excluding a ch…
1.3.6.1.4.1.207.8.4.4.4.37.4TableccCallLogTablenot-accessiblemandatoryThe table of ISDN call log entries.
1.3.6.1.4.1.207.8.4.4.4.37.4.1RowccCallLogEntrynot-accessiblemandatoryA single entry in the ISDN call log table.
1.3.6.1.4.1.207.8.4.4.4.37.4.1.1ColumnccCallLogIndexread-onlymandatoryThe index of the call log entry. Since the call log table is dynamic, there is no guarantee that this index will continue to refer to the same log entry over t…
1.3.6.1.4.1.207.8.4.4.4.37.4.1.2ColumnccCallLogNameread-onlymandatoryThe name of the call details entry which generated the active call for which this is the log entry.
1.3.6.1.4.1.207.8.4.4.4.37.4.1.3ColumnccCallLogStateread-onlymandatoryThe state of the log entry. The value 'initial' means that the call is being established. The value 'active' means that the call is currently established. The …
1.3.6.1.4.1.207.8.4.4.4.37.4.1.4ColumnccCallLogTimeStartedread-onlymandatoryA string in the format 'dd-mmm-yyyy hh:mm:ss' which gives the start time of the call for which this is the log entry. If the call never reached or has not yet …
1.3.6.1.4.1.207.8.4.4.4.37.4.1.5ColumnccCallLogDirectionread-onlymandatoryThe direction of the call for which this is the log entry.
1.3.6.1.4.1.207.8.4.4.4.37.4.1.6ColumnccCallLogDurationread-onlymandatoryThe duration in seconds, of the call for which this is the log entry. A value of 0 in this field means either that the call has just started, that the call was…
1.3.6.1.4.1.207.8.4.4.4.37.4.1.7ColumnccCallLogRemoteNumberread-onlymandatoryFor incoming calls, the calling number, if this was made available in the SETUP message. For outgoing calls, the number dialed. If the number was not available…
1.3.6.1.4.1.207.8.4.4.4.37.5TableccAttachmentTablenot-accessiblemandatoryThe table of call detail attachment entries.
1.3.6.1.4.1.207.8.4.4.4.37.5.1RowccAttachmentEntrynot-accessiblemandatoryA single entry in the attachment table.
1.3.6.1.4.1.207.8.4.4.4.37.5.1.1ColumnccAttachmentDetailsIndexread-onlymandatoryThe index of the call details entry to which this attachment entry belongs.
1.3.6.1.4.1.207.8.4.4.4.37.5.1.2ColumnccAttachmentEntryIndexread-onlymandatoryThe index of the attachment entry within the attachment list.
1.3.6.1.4.1.207.8.4.4.4.37.5.1.3ColumnccAttachmentActiveCallIndexread-onlymandatoryThe index of the active call for this attachment. A value of 0 indicates that there is currently no active call for this attachment. A value of 1 to 128 refere…
1.3.6.1.4.1.207.8.4.4.4.37.5.1.4ColumnccAttachmentUserInstanceread-onlymandatoryThe instance of the user module attached to the ISDN active call for this attachment. This object should return the same value as the object ccActiveCallUserIn…
1.3.6.1.4.1.207.8.4.4.4.37.6TableccBchannelTablenot-accessiblemandatoryThe table of B channel attachment entries.
1.3.6.1.4.1.207.8.4.4.4.37.6.1RowccBchannelEntrynot-accessiblemandatoryA single entry in the B channel attachment table.
1.3.6.1.4.1.207.8.4.4.4.37.6.1.1ColumnccBchannelIfIndexread-onlymandatoryThe interface index of the interface which this B channel entry is on. The ifEntry indexed by this object is the ifEntry for the entire ISDN interface, not the…
1.3.6.1.4.1.207.8.4.4.4.37.6.1.2ColumnccBchannelChannelIndexread-onlymandatoryThe B channel number for this B channel entry. BRI interfaces have B channels in the range 1..2, PRI interfaces have B channels in the range 1..31, excluding a…
1.3.6.1.4.1.207.8.4.4.4.37.6.1.3ColumnccBchannelAllocatedread-onlymandatoryA flag indicating whether this B channel is actually allocated to a call or not.
1.3.6.1.4.1.207.8.4.4.4.37.6.1.4ColumnccBchannelCallTyperead-onlymandatoryThe type of call on this B channel. If the B channel is not allocated, the call type will be undefined.
1.3.6.1.4.1.207.8.4.4.4.37.6.1.5ColumnccBchannelActiveCallIndexread-onlymandatoryThe index of the active call which is currently attached to this B channel. If the value of this object is 0 the channel is either not allocated, or is not all…
1.3.6.1.4.1.207.8.4.4.4.37.6.1.6ColumnccBchannelPriorityread-onlymandatoryThe priority of the call which has this B channel allocated to it. This is in the range 0..99 for data calls, 150 for voice calls and 200 for emergency voice c…
1.3.6.1.4.1.207.8.4.4.4.37.6.1.7ColumnccBchannelDirectionread-onlymandatoryThe direction of the call which has this B channel allocated to it. If this B channel is not allocated the value will be 'unallocated'.
1.3.6.1.4.1.207.8.4.4.4.41Nodebri
1.3.6.1.4.1.207.8.4.4.4.41.1TablebriIntTablenot-accessiblemandatoryThe table of BRI interfaces.
1.3.6.1.4.1.207.8.4.4.4.41.1.1RowbriIntEntrynot-accessiblemandatoryA single entry in the BRI interfaces table.
1.3.6.1.4.1.207.8.4.4.4.41.1.1.1ColumnbriIntIndexread-onlymandatoryThe ifIndex of the BRI interface.
1.3.6.1.4.1.207.8.4.4.4.41.1.1.2ColumnbriIntBoardIndexread-onlymandatoryThe index in the arBoardTable of the board on which this BRI interface resides.
1.3.6.1.4.1.207.8.4.4.4.41.1.1.3ColumnbriIntBoardPositionread-onlymandatoryThe position on this BRI interface's board of this BRI interface.
1.3.6.1.4.1.207.8.4.4.4.41.1.1.4ColumnbriIntModeread-onlymandatoryThe mode of operation of this BRI interface. The value isdn means that the entire interface is operating as an ISDN interface, the value tdm means that the ent…
1.3.6.1.4.1.207.8.4.4.4.41.1.1.5ColumnbriIntTdmChannelMapread-onlymandatoryA bit map of the channels in the BRI interface which are dedicated to TDM. Channel B1 has channel map value of 1, channel B2 has a channel map value of 2.
1.3.6.1.4.1.207.8.4.4.4.41.1.1.6ColumnbriIntIsdnChannelMapread-onlymandatoryA bit map of the channels in the BRI interface which are dedicated to ISDN. Channel B1 has channel map value of 1, channel B2 has a channel map value of 2.
1.3.6.1.4.1.207.8.4.4.4.41.2TablebriChanTablenot-accessiblemandatoryThe table of channels on BRI interfaces.
1.3.6.1.4.1.207.8.4.4.4.41.2.1RowbriChanEntrynot-accessiblemandatoryA single entry in the BRI channels table.
1.3.6.1.4.1.207.8.4.4.4.41.2.1.1ColumnbriChanIntIndexread-onlymandatoryThe ifIndex of the BRI interface.
1.3.6.1.4.1.207.8.4.4.4.41.2.1.2ColumnbriChanChannelIndexread-onlymandatoryThe channel index of the BRI channel. Channel B1 has index 1, channel B2 has index 2 and the D channel has index 3.
1.3.6.1.4.1.207.8.4.4.4.41.2.1.3ColumnbriChanModeread-onlymandatoryThe mode of this BRI channel. The value isdn means that the channel is reserved for use in ISDN calls. The value tdm means that the channel is reserved for use…
1.3.6.1.4.1.207.8.4.4.4.41.2.1.4ColumnbriChanStateread-onlymandatoryThe state of this BRI channel. The value inactive means that the channel does not currently have an active user, either an ISDN call or an active TDM group. Th…
1.3.6.1.4.1.207.8.4.4.4.42Nodepri
1.3.6.1.4.1.207.8.4.4.4.42.1TablepriIntTablenot-accessiblemandatoryThe table of PRI interfaces.
1.3.6.1.4.1.207.8.4.4.4.42.1.1RowpriIntEntrynot-accessiblemandatoryA single entry in the PRI interfaces table.
1.3.6.1.4.1.207.8.4.4.4.42.1.1.1ColumnpriIntIndexread-onlymandatoryThe ifIndex of the PRI interface.
1.3.6.1.4.1.207.8.4.4.4.42.1.1.2ColumnpriIntBoardIndexread-onlymandatoryThe index in the arBoardTable of the board on which this PRI interface resides.
1.3.6.1.4.1.207.8.4.4.4.42.1.1.3ColumnpriIntBoardPositionread-onlymandatoryThe position on this PRI interface's board of this PRI interface.
1.3.6.1.4.1.207.8.4.4.4.42.1.1.4ColumnpriIntModeread-onlymandatoryThe mode of operation of this PRI interface. The value isdn means that the entire interface is operating as an ISDN interface, the value tdm means that the ent…
1.3.6.1.4.1.207.8.4.4.4.42.1.1.5ColumnpriIntTdmChannelMapread-onlymandatoryA bit map of the channels in the PRI interface which are dedicated to TDM. PRI channels are numbered from 0 to 31, 0 is unused, 16 (E1) or 24 (T1) is the D cha…
1.3.6.1.4.1.207.8.4.4.4.42.1.1.6ColumnpriIntIsdnChannelMapread-onlymandatoryA bit map of the channels in the PRI interface which are dedicated to ISDN. PRI channels are numbered from 0 to 31, 0 is unused, 16 (E1) or 24 (T1) is the D ch…
1.3.6.1.4.1.207.8.4.4.4.42.1.1.7ColumnpriIntTyperead-onlymandatoryThe type of primary rate interface. E1 has 30 B + D channel, T1 has 23 B + D channel. If the value unknown is returned for this object, the exact PRI type has …
1.3.6.1.4.1.207.8.4.4.4.42.2TablepriChanTablenot-accessiblemandatoryThe table of channels on PRI interfaces.
1.3.6.1.4.1.207.8.4.4.4.42.2.1RowpriChanEntrynot-accessiblemandatoryA single entry in the PRI channels table.
1.3.6.1.4.1.207.8.4.4.4.42.2.1.1ColumnpriChanIntIndexread-onlymandatoryThe ifIndex of the PRI interface.
1.3.6.1.4.1.207.8.4.4.4.42.2.1.2ColumnpriChanChannelIndexread-onlymandatoryThe channel index of the PRI channel. Valid channels have indices from 1 to 31. The D channel on an E1 interface has index 16, the D channel on a T1 interface …
1.3.6.1.4.1.207.8.4.4.4.42.2.1.3ColumnpriChanModeread-onlymandatoryThe mode of this PRI channel. The value isdn means that the channel is reserved for use in ISDN calls. The value tdm means that the channel is reserved for use…
1.3.6.1.4.1.207.8.4.4.4.42.2.1.4ColumnpriChanStateread-onlymandatoryThe state of this PRI channel. The value inactive means that the channel does not currently have an active user, either an ISDN call or an active TDM group. Th…
1.3.6.1.4.1.207.8.4.4.4.48Nodeloader
1.3.6.1.4.1.207.8.4.4.4.48.1TableloadTablenot-accessiblemandatoryThe table of load parameters, dynamic and static.
1.3.6.1.4.1.207.8.4.4.4.48.1.1RowloadEntrynot-accessiblemandatoryA single entry of load parameters. This contains the parameters required to perform a load from the router.
1.3.6.1.4.1.207.8.4.4.4.48.1.1.1ColumnloadIndexread-writemandatoryThere are two sets of load information, dynamic and static. The dynamic information is used once, then cleared. The static information is used whenever the dyn…
1.3.6.1.4.1.207.8.4.4.4.48.1.1.2ColumnloadServerread-writemandatoryThe IP address from which load will load.
1.3.6.1.4.1.207.8.4.4.4.48.1.1.3ColumnloadDestinationread-writemandatoryThe destination of the file loaded, either flash or nvs memory, or undefined.
1.3.6.1.4.1.207.8.4.4.4.48.1.1.4ColumnloadFilenameread-writemandatoryThe file name of the file being loaded.
1.3.6.1.4.1.207.8.4.4.4.48.1.1.5ColumnloadDelayread-writemandatoryA delay in seconds between the initiation of the load and the start of the load. This allows for time to set up TFTP servers in cases where the terminal and TF…
1.3.6.1.4.1.207.8.4.4.4.48.2ScalarloadStatusread-writemandatoryStatus and action object for the load module. The values 1 to 5 are read-only values and reflect the state of the load module. Values 4 and 5 (complete and res…
1.3.6.1.4.1.207.8.4.4.4.49Nodeinstall
1.3.6.1.4.1.207.8.4.4.4.49.1NodeconfigFileExistTrapThis trap is generated when the boot file is detected as missing
1.3.6.1.4.1.207.8.4.4.4.49.1TableinstallTablenot-accessiblemandatoryThe list of install configurations for the router.
1.3.6.1.4.1.207.8.4.4.4.49.1.1RowinstallEntrynot-accessiblemandatoryAn entry in the list of install configurations.
1.3.6.1.4.1.207.8.4.4.4.49.1.1.1ColumninstIndexread-onlymandatoryThe index for the install table. There are four install configurations defined in the router, default, preferred, temporary and current. The router will attemp…
1.3.6.1.4.1.207.8.4.4.4.49.1.1.2ColumninstRelDeviceread-onlymandatoryThe device for the release in the install. If the device is flash the file for the release is given in instRelName. Devices none(1) or flash(3) are invalid for…
1.3.6.1.4.1.207.8.4.4.4.49.1.1.3ColumninstRelNameread-onlymandatoryThe file name for the release in the install, if the instRelDevice is flash(3). If the instRelDevice is none(1) or eprom(2), this object should be a null strin…
1.3.6.1.4.1.207.8.4.4.4.49.1.1.4ColumninstRelMajorread-onlymandatoryThe major release number for this install. This information is obtained by the router when the other elements in the row are set and is thus not directly set b…
1.3.6.1.4.1.207.8.4.4.4.49.1.1.5ColumninstRelMinorread-onlymandatoryThe minor release number for this install. This information is obtained by the router when the other elements in the row are set and is thus not directly set b…
1.3.6.1.4.1.207.8.4.4.4.49.1.1.6ColumninstPatDeviceread-onlymandatoryThe device for the patch in the install. The file for the patch is given in instPatName unless the device is none(1).
1.3.6.1.4.1.207.8.4.4.4.49.1.1.7ColumninstPatNameread-onlymandatoryThe file name for the patch in the install.
1.3.6.1.4.1.207.8.4.4.4.49.1.1.8ColumninstRelInterimread-onlymandatoryThe interim release number for this install. This information is obtained by the router when the other elements in the row are set and is thus not directly set…
1.3.6.1.4.1.207.8.4.4.4.49.1.1.9ColumninstRelExistsread-onlymandatoryIndicates if the release file exists or not. true(1) means it exists, false(2) means it doesn't.
1.3.6.1.4.1.207.8.4.4.4.49.1.1.10ColumninstPatExistsread-onlymandatoryIndicates if the patch file exists or not. true(1) means it exists, false(2) means it doesn't
1.3.6.1.4.1.207.8.4.4.4.49.2TableinstallHistoryTablenot-accessiblemandatoryThe table of descriptions of events in the install history of the router.
1.3.6.1.4.1.207.8.4.4.4.49.2.1RowinstallHistoryEntrynot-accessiblemandatoryA single line describing part of the install history of the router.
1.3.6.1.4.1.207.8.4.4.4.49.2.1.1ColumninstHistIndexread-onlymandatoryThe index of this event in the install history. Indices run from 1 to the maximum number. The maximum number is not available as a managed object so this table…
1.3.6.1.4.1.207.8.4.4.4.49.2.1.2ColumninstHistLineread-onlymandatoryA line of text describing a single event in the install history of the router.
1.3.6.1.4.1.207.8.4.4.4.49.3ScalarconfigFileread-writemandatoryThe name of the file that the router will configure from at boot. The format of the name is the same as that for fileName described above. If the configuration…
1.3.6.1.4.1.207.8.4.4.4.49.4TablelicenceTablenot-accessiblemandatoryThe list of release licences in the router.
1.3.6.1.4.1.207.8.4.4.4.49.4.1RowlicenceEntrynot-accessiblemandatoryAn entry in the list of release licences.
1.3.6.1.4.1.207.8.4.4.4.49.4.1.1ColumnlicenceIndexread-onlymandatoryA unique licence index. Licence indices are recalculated every time the router reboots to reflect the current licences on the router. As licences are added, ne…
1.3.6.1.4.1.207.8.4.4.4.49.4.1.2ColumnlicenceStatusread-writemandatoryThe status of the file. When read, this object will always return a value of ok(1), since the object will not exist if the value is deleting(2). Write the valu…
1.3.6.1.4.1.207.8.4.4.4.49.4.1.3ColumnlicenceReleaseread-writemandatoryThe file name for the release whose licence this is.
1.3.6.1.4.1.207.8.4.4.4.49.4.1.4ColumnlicenceMajorread-writemandatoryThe major release number for the release whose licence this is.
1.3.6.1.4.1.207.8.4.4.4.49.4.1.5ColumnlicenceMinorread-writemandatoryThe minor release number for the release whose licence this is.
1.3.6.1.4.1.207.8.4.4.4.49.4.1.6ColumnlicencePasswordread-writemandatoryThe password for this release. The password is a string of hex digits.
1.3.6.1.4.1.207.8.4.4.4.49.4.1.7ColumnlicenceExpiryread-onlymandatoryA human-readable string that gives the expiry date of this licence.
1.3.6.1.4.1.207.8.4.4.4.49.4.1.8ColumnlicenceInterimread-writemandatoryThe interim release number for the release whose licence this is.
1.3.6.1.4.1.207.8.4.4.4.49.5ScalarcreateConfigFileread-writemandatoryThe name of a file to create containing the current router configuration. A read from this variable will return the same as the variable configFile. Thus to sa…
1.3.6.1.4.1.207.8.4.4.4.49.6ScalarconfigFileExistread-onlymandatoryIndicates if the boot configuration file exists or not. true(1) means it exists, false(2) means it doesn't
1.3.6.1.4.1.207.8.4.4.4.49.7ScalarcurrentConfigFileread-onlymandatoryThe name of the file that the router is currently configured with. The format of the name is the same as that for fileName described above. If the current conf…
1.3.6.1.4.1.207.8.4.4.4.53Nodetrigger
1.3.6.1.4.1.207.8.4.4.4.53.1ScalartriggerLastTriggerActivatedread-onlymandatoryThe trigger number of the most recent trigger activated on this router. This is also the variable sent in the trigger trap below. If no triggers have been acti…
1.3.6.1.4.1.207.8.4.4.4.53.1NodetriggerTrapA trigger trap is generated a trigger is activated. The number of the trigger activated is given by the variable triggerLastTriggerActivated.
1.3.6.1.4.1.207.8.4.4.4.56Nodefile
1.3.6.1.4.1.207.8.4.4.4.56.1TablefileTablenot-accessiblemandatoryA list of all the files in the router's non-volatile storage.
1.3.6.1.4.1.207.8.4.4.4.56.1.1RowfileEntrynot-accessiblemandatoryAn entry in the list of files containing information about a single file in the router.
1.3.6.1.4.1.207.8.4.4.4.56.1.1.1ColumnfileIndexread-onlymandatoryA unique file index. File indices are recalculated every time the router reboots to reflect the current files on the router. As files are added, new indices ar…
1.3.6.1.4.1.207.8.4.4.4.56.1.1.2ColumnfileNameread-onlymandatoryThe name of the file, in the form <name.typ>. The name is up to eight characters long, the type is up to three characters long.
1.3.6.1.4.1.207.8.4.4.4.56.1.1.3ColumnfileDeviceread-onlymandatoryThe device on which the file resides.
1.3.6.1.4.1.207.8.4.4.4.56.1.1.4ColumnfileCreationTimeread-onlymandatoryThe creation date and time for the file, in the format <dd-mmm-yy, hh:mm:ss>.
1.3.6.1.4.1.207.8.4.4.4.56.1.1.5ColumnfileStatusread-writemandatoryThe status of the file. When read, this object will always return a value of ok(1), since the object will not exist if the value is deleting(2). Write the valu…
1.3.6.1.4.1.207.8.4.4.4.56.1.1.6ColumnfileSizeread-onlymandatoryThe size, in bytes, of the file.
1.3.6.1.4.1.207.8.4.4.4.56.2ScalarfileNumbersread-onlymandatoryThe total number of files in FLASH and NVS.
1.3.6.1.4.1.207.8.4.4.4.58Nodeping
1.3.6.1.4.1.207.8.4.4.4.58.1TablepingTablenot-accessiblemandatoryThe table of ping parameters, dynamic and static.
1.3.6.1.4.1.207.8.4.4.4.58.1NodepingTrapA ping trap is generated when a ping has completed. Traps are only generated if the variable pingTrapOnCompletion is set to true(1) in the dynamic ping entry. …
1.3.6.1.4.1.207.8.4.4.4.58.1.1RowpingEntrynot-accessiblemandatoryA single entry of ping parameters. This contains the parameters required to perform a ping from the router. The ping specified by the dynamic parameters, can b…
1.3.6.1.4.1.207.8.4.4.4.58.1.1.1ColumnpingIndexread-onlymandatoryThere are two sets of ping information, dynamic and static. The dynamic information is used only once, for the next ping, then automatically replaced with the …
1.3.6.1.4.1.207.8.4.4.4.58.1.1.2ColumnpingProtocolread-writemandatoryThe protocol that the ping will use. The protocol must match the destination address. Ping supports both IP, IPX, Appletalk, and OSI addresses. The protocol mu…
1.3.6.1.4.1.207.8.4.4.4.58.1.1.3ColumnpingAddressread-writemandatoryThe address specifies the destination address for ping packets for Appletalk, IP, IPX and OSI networks, respectively. The address format must match the protoco…
1.3.6.1.4.1.207.8.4.4.4.58.1.1.4ColumnpingNumberOfPacketsread-writemandatoryThe number of ping packets to transmit.
1.3.6.1.4.1.207.8.4.4.4.58.1.1.5ColumnpingPacketSizeread-writemandatoryThe packet size parameter specifies the length in bytes, of data to include in the data portion of the ping packet. The protocol packet header size and the siz…
1.3.6.1.4.1.207.8.4.4.4.58.1.1.6ColumnpingTimeoutread-writemandatoryTimeout specifies the amount of time to wait for a response to a ping packet. Timeout must be greater than zero.
1.3.6.1.4.1.207.8.4.4.4.58.1.1.7ColumnpingDelayread-writemandatoryThe delay parameter specifies the time interval, in seconds, between ping packets.
1.3.6.1.4.1.207.8.4.4.4.58.1.1.8ColumnpingTrapOnCompletionread-writemandatorySpecifies whether a trap should be issued on completion of the sequence of pings.
1.3.6.1.4.1.207.8.4.4.4.58.1.1.9ColumnpingTypeOfServiceread-writemandatoryThe Type Of Service (TOS) parameter is only valid for IP addresses, and specifies the TOS field in the IP header of the ping packet, as a decimal in the range …
1.3.6.1.4.1.207.8.4.4.4.58.1.1.10ColumnpingPatternread-writemandatoryThe pattern parameter specifies the data pattern to use in the data portion of the ping packet.
1.3.6.1.4.1.207.8.4.4.4.58.2ScalarpingStatusread-writemandatoryStatus and action object for the ping module. A status of '1' indicates that the ping is currently running, the status can be set to '2' to stop the ping. A st…
1.3.6.1.4.1.207.8.4.4.4.58.3NodepingStatistics
1.3.6.1.4.1.207.8.4.4.4.58.3.1ScalarpingSentPacketsread-onlymandatoryThe number of ping packets sent to the target in the last ping. The default before the completion of a ping is zero.
1.3.6.1.4.1.207.8.4.4.4.58.3.2ScalarpingReceivedPacketsread-onlymandatoryThe number of packets received from the target in the last ping. The default before the completion of a ping is zero.
1.3.6.1.4.1.207.8.4.4.4.58.3.3ScalarpingMinimumRoundTripTimeread-onlymandatoryThe quickest round trip time taken by any of the ping packets in milliseconds in the last ping. The default before the completion of a ping is negative one.
1.3.6.1.4.1.207.8.4.4.4.58.3.4ScalarpingAverageRoundTripTimeread-onlymandatoryThe average round trip time taken by the ping packets in milliseconds in the last ping. The default before the completion of a ping is zero.
1.3.6.1.4.1.207.8.4.4.4.58.3.5ScalarpingMaximumRoundTripTimeread-onlymandatoryThe slowest round trip time taken by any of the ping packets in milliseconds in the last ping. The default before the completion of a ping is zero.
1.3.6.1.4.1.207.8.4.4.4.70Nodedhcp
1.3.6.1.4.1.207.8.4.4.4.70.1NodedhcpRangeExhaustedTrapThis trap is generated when a DHCP client makes a request for an IP address and the request cannot be satisfied because all addresses in the range are already …
1.3.6.1.4.1.207.8.4.4.4.70.1TabledhcpRangeTablenot-accessiblemandatoryThe table of DHCP ranges.
1.3.6.1.4.1.207.8.4.4.4.70.1.1RowdhcpRangeEntrynot-accessiblemandatoryA single entry of the DHCP range table. This contains information about a single DHCP range configured on this device.
1.3.6.1.4.1.207.8.4.4.4.70.1.1.1ColumndhcpRangeIndexread-onlymandatoryThe index of this DHCP range. DHCP ranges are stored in a list which is ordered by range name. The index gives the place in the list. Note that if ranges are a…
1.3.6.1.4.1.207.8.4.4.4.70.1.1.2ColumndhcpRangeNameread-onlymandatoryThe name given to identify this DHCP range. This is the ultimate method for uniquely identifying this range. Names are compared without regard to case, for exa…
1.3.6.1.4.1.207.8.4.4.4.70.1.1.3ColumndhcpRangeBaseAddressread-onlymandatoryThe base address of this range. This address defines the lower bound of the range of IP addresses which can be allocated to devices requesting an IP address vi…
1.3.6.1.4.1.207.8.4.4.4.70.1.1.4ColumndhcpRangeNumberOfAddressesread-onlymandatoryThe number of IP address in this range. This number defines the upper bound of the range of IP addresses which can be allocated to devices requesting an IP add…
1.3.6.1.4.1.207.8.4.4.4.70.1.1.5ColumndhcpRangeGatewayread-onlymandatoryThe IP address of the BOOTP relay agent which will be relaying DHCP requests for this range. If this address is 0.0.0.0, then there will be no BOOTP relay agen…
1.3.6.1.4.1.207.8.4.4.4.70.2NodedhcpTrapVariable
1.3.6.1.4.1.207.8.4.4.4.70.2.1ScalardhcpRangeExhaustedGatewayread-onlymandatoryWhenever a DHCP client attempts to lease an IP address and the DHCP server cannot provide an address, this variable is set to the gateway address of the DHCP r…
1.3.6.1.4.1.207.8.4.4.4.70.2.2ScalardhcpRangeExhaustedInterfaceread-onlymandatoryWhenever a DHCP client attempts to lease an IP address and the DHCP server cannot provide an address, this variable is set to the IP address of the interface w…
1.3.6.1.4.1.207.8.4.4.4.70.3TabledhcpClientTablenot-accessiblemandatoryThe table of defined DHCP range client addresses.
1.3.6.1.4.1.207.8.4.4.4.70.3.1RowdhcpClientEntrynot-accessiblemandatoryA single entry of the DHCP range client table. This contains information about a single DHCP range client address.
1.3.6.1.4.1.207.8.4.4.4.70.3.1.1ColumndhcpClientIpAddressread-onlymandatoryAn IP address from the range of available addresses.
1.3.6.1.4.1.207.8.4.4.4.70.3.1.2ColumndhcpClientIDread-onlymandatoryThe hardware address of the client, if any, that has been assigned the IP address.
1.3.6.1.4.1.207.8.4.4.4.70.3.1.3ColumndhcpClientStateread-onlymandatoryThe state of the IP address; one of unused, inuse or reclaim.
1.3.6.1.4.1.207.8.4.4.4.70.3.1.4ColumndhcpClientTyperead-onlymandatoryThe type of allocation mechanism applied to the IP address; one of static, auto or dyn.
1.3.6.1.4.1.207.8.4.4.4.70.3.1.5ColumndhcpClientExpiryread-onlymandatoryThe expiry date for dynamically allocated IP address.
1.3.6.1.4.1.207.8.4.4.4.77Nodefirewall
1.3.6.1.4.1.207.8.4.4.4.77.1NodefirewallTrapA firewall trap is generated when the firewall detects an intrusion or attack and notifies the router manager. Firewall trap notifications are enabled with the…
1.3.6.1.4.1.207.8.4.4.4.77.1ScalarfirewallTrapMessageread-onlymandatoryThe last message sent in a firewall TRAP. This variable is really just a placeholder for the object sent in the firewall TRAP, but can be read independently if…
1.3.6.1.4.1.207.8.4.4.4.87Nodeswi
1.3.6.1.4.1.207.8.4.4.4.87.1TableswiPortTablenot-accessiblemandatoryTable of port properties.
1.3.6.1.4.1.207.8.4.4.4.87.1.1RowswiPortEntrynot-accessiblemandatoryAn entry in the port information table.
1.3.6.1.4.1.207.8.4.4.4.87.1.1.1ColumnswiPortNumberread-onlymandatoryThis object identifies the port of the switch.
1.3.6.1.4.1.207.8.4.4.4.87.1.1.20ColumnswiPortIngressLimitread-writemandatoryThe Ingress Bandwidth Limit applied to the port. A value of zero indicates that no limit is set.
1.3.6.1.4.1.207.8.4.4.4.87.1.1.21ColumnswiPortEgressLimitread-writemandatoryThe Egress Bandwidth Limit applied to the port. A value of zero indicates that no limit is set.
1.3.6.1.4.1.207.8.4.4.4.87.2Tableswi56xxPortCounterTablenot-accessiblemandatoryTable of swi56xx port counter properties.
1.3.6.1.4.1.207.8.4.4.4.87.2.1Rowswi56xxPortCounterEntrynot-accessiblemandatoryAn entry in the port information table.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.1Columnswi56xxPortNumberread-onlymandatoryThis object identifies the port of the switch.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.2Columnswi56xxRxTx64kPktsread-onlymandatoryThe number of 64kB packets received and transmitted.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.3Columnswi56xxRxTx65To127kPktsread-onlymandatoryThe number of 65kB To 127kB packets received and transmitted.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.4Columnswi56xxRxTx128To255kPktsread-onlymandatoryThe number of 128kB To 255kB packets received and transmitted.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.5Columnswi56xxRxTx256To511kPktsread-onlymandatoryThe number of 256kB To 511kB packets received and transmitted.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.6Columnswi56xxRxTx512To1023kPktsread-onlymandatoryThe number of 512kB To 1023kB packets received and transmitted.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.7Columnswi56xxRxTx1024ToMaxPktSzPktsread-onlymandatoryThe number of 1024kB To MaxPktSz packets received and transmitted.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.8Columnswi56xxRxTx519To1522kPktsread-onlymandatoryThe number of 519kB To 1522kB packets received and transmitted.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.9Columnswi56xxPortRxOctetsread-onlymandatoryThe number of octets received.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.10Columnswi56xxPortRxPktsread-onlymandatoryThe number of packets received.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.11Columnswi56xxPortRxFCSErrorsread-onlymandatoryThe number of frames received containing a Frame Check Sequence error.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.12Columnswi56xxPortRxMulticastPktsread-onlymandatoryThe number of multicast packets received.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.13Columnswi56xxPortRxBroadcastPktsread-onlymandatoryThe number of broadcast packets received.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.14Columnswi56xxPortRxPauseMACCtlFrmsread-onlymandatoryThe number of valid PAUSE MAC Control frames received.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.15Columnswi56xxPortRxOversizePktsread-onlymandatoryThe number of oversize packets received.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.16Columnswi56xxPortRxFragmentsread-onlymandatoryThe number of fragments received.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.17Columnswi56xxPortRxJabbersread-onlymandatoryThe number of jabber frames received.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.18Columnswi56xxPortRxMACControlFrmsread-onlymandatoryThe number of MAC Control frames (Pause and Unsupported) received.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.19Columnswi56xxPortRxUnsupportOpcoderead-onlymandatoryThe number of MAC Control frames with unsupported opcode (i.e. not Pause) received.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.20Columnswi56xxPortRxAlignmentErrorsread-onlymandatoryThe number of frames with alignment errors received.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.21Columnswi56xxPortRxOutOfRngeLenFldread-onlymandatoryThe number of packets with length out of range received.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.22Columnswi56xxPortRxSymErDurCarrierread-onlymandatoryThe number of frames with invalid data symbols received.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.23Columnswi56xxPortRxCarrierSenseErrread-onlymandatoryThe number of false carrier conditions between frames received.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.24Columnswi56xxPortRxUndersizePktsread-onlymandatoryThe number of undersized packets received.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.25Columnswi56xxPortRxIpInHdrErrorsread-onlymandatoryswiPortRxIpInHdrErrors
1.3.6.1.4.1.207.8.4.4.4.87.2.1.26Columnswi56xxPortTxOctetsread-onlymandatoryThe number of octets transmitted.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.27Columnswi56xxPortTxPktsread-onlymandatoryThe number of packets transmitted.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.28Columnswi56xxPortTxFCSErrorsread-onlymandatoryThe number of frames containing a Frame Check Sequence error transmitted.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.29Columnswi56xxPortTxMulticastPktsread-onlymandatoryThe number of multicast packets transmitted.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.30Columnswi56xxPortTxBroadcastPktsread-onlymandatoryThe number of broadcast packets transmitted.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.31Columnswi56xxPortTxPauseMACCtlFrmsread-onlymandatoryThe number of valid PAUSE MAC Control frames transmitted.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.32Columnswi56xxPortTxOversizePktsread-onlymandatoryThe number of oversize packets transmitted.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.33Columnswi56xxPortTxFragmentsread-onlymandatoryThe number of fragments transmitted.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.34Columnswi56xxPortTxJabbersread-onlymandatoryThe number of jabber frames transmitted.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.35Columnswi56xxPortTxPauseCtrlFrmsread-onlymandatoryThe number of Pause control frames transmitted.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.36Columnswi56xxPortTxFrameWDeferrdTxread-onlymandatoryThe number of frames deferred once before successful transmission.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.37Columnswi56xxPortTxFrmWExcesDeferread-onlymandatoryThe number of frame aborted after too many deferrals.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.38Columnswi56xxPortTxSingleCollsnFrmread-onlymandatoryThe number of frames which experienced exactly one collision.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.39Columnswi56xxPortTxMultCollsnFrmread-onlymandatoryThe number of frames which experienced 2 to 15 collisions (including late collisions).
1.3.6.1.4.1.207.8.4.4.4.87.2.1.40Columnswi56xxPortTxLateCollsnsread-onlymandatoryThe number of frames which experienced late collisions.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.41Columnswi56xxPortTxExcessivCollsnsread-onlymandatoryThe number of frames aborted before transmission after 16 collisions.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.42Columnswi56xxPortTxCollisionFramesread-onlymandatoryThe total number of collisions.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.43Columnswi56xxPortMiscDropEventsread-onlymandatoryThe number of packets discarded at ingress port.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.44Columnswi56xxPortMiscTaggedPktTxread-onlymandatoryThe number of VLAN tagged packets transmitted.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.45Columnswi56xxPortMiscTotalPktTxAbortread-onlymandatoryThe number of Layer 2 and 3 packets aborted during transmission.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.46Columnswi56xxPortHWMultiTTLexpiredread-onlymandatoryNumber of multicast TTL expired frames.
1.3.6.1.4.1.207.8.4.4.4.87.2.1.47Columnswi56xxPortHWMultiBridgedFramesread-onlymandatoryNumber of multicast bridged frames
1.3.6.1.4.1.207.8.4.4.4.87.2.1.48Columnswi56xxPortHWMultiRxDropsread-onlymandatoryNumber of multicast frames dropped at reception
1.3.6.1.4.1.207.8.4.4.4.87.2.1.49Columnswi56xxPortHWMultiTxDropsread-onlymandatoryNNumber of multicast frames dropped at transmission
1.3.6.1.4.1.207.8.4.4.4.87.3NodeswiDebugVariables
1.3.6.1.4.1.207.8.4.4.4.87.3.1ScalarswiDebugMemoryParityErrorsread-onlymandatoryFor switches based on certain switch chips, the number of parity errors that have been detected in packet memory associated with the switch. If the device does…
1.3.6.1.4.1.207.8.4.4.4.87.6NodeswiIntrusionDetectionTrapAn intrusion detection trap is generated when a port has intrusion detection enabled, and the action taken when intrusion is detected is to generate a trap. In…
1.3.6.1.4.1.207.8.4.4.4.104Nodelb
1.3.6.1.4.1.207.8.4.4.4.104.1TablelbShowGlobalTablenot-accessiblemandatoryGeneral configuration and status of all of the virtual balancers configured on the router.
1.3.6.1.4.1.207.8.4.4.4.104.1.1RowlbShowGlobalEntrynot-accessiblemandatoryAn entry in the global table.
1.3.6.1.4.1.207.8.4.4.4.104.1.1.1ColumnlbGlobalIndexread-onlymandatoryThe index for the global table.
1.3.6.1.4.1.207.8.4.4.4.104.1.1.2ColumnlbAffinityTimeOutread-onlymandatoryThe length of time in seconds that a resource can be associated to a source IP address or Cookie after the connection has been closed.
1.3.6.1.4.1.207.8.4.4.4.104.1.1.3ColumnlbOrphanTimeOutread-onlymandatoryThe length of time in seconds that a connection can exist without having any data traversing it, before being declared an orphan and closed by the router.
1.3.6.1.4.1.207.8.4.4.4.104.1.1.4ColumnlbCriticalRstread-onlymandatoryThe ratio of total messages received from a resource that can be TCP RST messages represented as a percentage.
1.3.6.1.4.1.207.8.4.4.4.104.1.1.5ColumnlbTotalResourcesread-onlymandatoryThe total number of resources configured on the router.
1.3.6.1.4.1.207.8.4.4.4.104.1.1.6ColumnlbTotalResPoolsread-onlymandatoryThe total number of resource pools configured on the router.
1.3.6.1.4.1.207.8.4.4.4.104.1.1.7ColumnlbTotalVirtBalsread-onlymandatoryThe total number of virtual balancers configured on the router.
1.3.6.1.4.1.207.8.4.4.4.104.1.1.8ColumnlbCurrentConnectionsread-onlymandatoryDisplays the current total number of connections to all resources in every resource pool on the router.
1.3.6.1.4.1.207.8.4.4.4.104.2TablelbShowResTablenot-accessiblemandatoryA list about the general information about for a given resource.
1.3.6.1.4.1.207.8.4.4.4.104.2.1RowlbShowResEntrynot-accessiblemandatoryAn entry in the resource table.
1.3.6.1.4.1.207.8.4.4.4.104.2.1.1ColumnlbResIndexread-onlymandatoryThe index for the resource table.
1.3.6.1.4.1.207.8.4.4.4.104.2.1.2ColumnlbResourceread-onlymandatoryThe name of the resource.
1.3.6.1.4.1.207.8.4.4.4.104.2.1.3ColumnlbResIpread-onlymandatoryThe IP address that a virtual balancer uses to accesses the resource.
1.3.6.1.4.1.207.8.4.4.4.104.2.1.4ColumnlbResPortread-onlymandatoryThe port that the service that the resource offer is accessed on.
1.3.6.1.4.1.207.8.4.4.4.104.2.1.5ColumnlbResStateread-onlymandatoryThe current state of the resource, either UP, DOWN, or CLOSING.
1.3.6.1.4.1.207.8.4.4.4.104.2.1.6ColumnlbResWeightread-onlymandatoryThe weight that the virtual balancer will apply to the resource when selecting resources to try a connection to from a resource pool using either the WEIGHTEDL…
1.3.6.1.4.1.207.8.4.4.4.104.2.1.7ColumnlbResTotalConnectionsread-onlymandatoryThe total number of successful connections that have been made to this resource while it has been in the UP state.
1.3.6.1.4.1.207.8.4.4.4.104.2.1.8ColumnlbResCurrentConnectionsread-onlymandatoryThe total number of connections currently made to the resource.
1.3.6.1.4.1.207.8.4.4.4.104.3TablelbShowResPoolTablenot-accessiblemandatoryA list about the general information about for a given resource pool.
1.3.6.1.4.1.207.8.4.4.4.104.3.1RowlbShowResPoolEntrynot-accessiblemandatoryAn entry in the resource pool table.
1.3.6.1.4.1.207.8.4.4.4.104.3.1.1ColumnlbResPoolIndexread-onlymandatoryThe index for the resource pool table.
1.3.6.1.4.1.207.8.4.4.4.104.3.1.2ColumnlbResPoolResourceIndexread-onlymandatoryThe index for the resource table.
1.3.6.1.4.1.207.8.4.4.4.104.3.1.3ColumnlbResPoolread-onlymandatoryThe name of the resource pool.
1.3.6.1.4.1.207.8.4.4.4.104.3.1.4ColumnlbResPoolSelectionAlgread-onlymandatoryThe selection algorithm that ius employed by this resource pool when a resource has been selected for a connection. The options are ROUNDROBIN, WEIGHTEDLEASTCO…
1.3.6.1.4.1.207.8.4.4.4.104.3.1.5ColumnlbResPoolFailOnLastread-onlymandatoryIndicates whether or not the resource pool will fail a resource if it is the last resource in the resource pool.
1.3.6.1.4.1.207.8.4.4.4.104.3.1.6ColumnlbResPoolTotalConnectionsread-onlymandatoryThe total number of successful connections that have been made to the resources in the resource pool over the lifetime of the resource pool.
1.3.6.1.4.1.207.8.4.4.4.104.3.1.7ColumnlbResPoolResourcesread-onlymandatoryThe name of the resource that is currently allocated to the resource pool.
1.3.6.1.4.1.207.8.4.4.4.104.4TablelbShowVirtBalTablenot-accessiblemandatoryA list about the general information about for a given virtual balancer.
1.3.6.1.4.1.207.8.4.4.4.104.4.1RowlbShowVirtBalEntrynot-accessiblemandatoryAn entry in the virtual balancer table.
1.3.6.1.4.1.207.8.4.4.4.104.4.1.1ColumnlbVirtBalIndexread-onlymandatoryThe index for the virtual balancer table.
1.3.6.1.4.1.207.8.4.4.4.104.4.1.2ColumnlbVirtBalread-onlymandatoryThe name of the virtual balancer.
1.3.6.1.4.1.207.8.4.4.4.104.4.1.3ColumnlbVirtBalPublicIpread-onlymandatoryThe IP address on which the virtual balancer will receive requests for the service provided by the resource pool associated with it.
1.3.6.1.4.1.207.8.4.4.4.104.4.1.4ColumnlbVirtBalPublicPortread-onlymandatoryThe port on which the virtual balancer will receive requests for the service provided by the resource pool associated with it.
1.3.6.1.4.1.207.8.4.4.4.104.4.1.5ColumnlbVirtBalStateread-onlymandatoryThe current state of the virtual balancer, can either be UP, CLOSING, or DOWN.
1.3.6.1.4.1.207.8.4.4.4.104.4.1.6ColumnlbVirtBalResPoolread-onlymandatoryThe name of the resource pool that is associated with the virtual balancer.
1.3.6.1.4.1.207.8.4.4.4.104.4.1.7ColumnlbVirtBalTyperead-onlymandatoryThe type of load balancer that this virtual balancer currently is, can be either TCP, HTTP, or ROUTE.
1.3.6.1.4.1.207.8.4.4.4.104.4.1.8ColumnlbVirtBalTotalConnectionsread-onlymandatoryThe total number of stateful connections currently running through this virtual balancer.
1.3.6.1.4.1.207.8.4.4.4.104.4.1.9ColumnlbVirtBalAffinityread-onlymandatoryIndicates whether or not entries will be made in a virtual balancers' affinity table for each stateful connection to a resource in its' resource pool (TCP and …
1.3.6.1.4.1.207.8.4.4.4.104.4.1.10ColumnlbVirtBalHttpErrorCoderead-onlymandatoryA list of the HTTP server error status code added.
1.3.6.1.4.1.207.8.4.4.4.104.5TablelbShowAffTablenot-accessiblemandatoryA list of affinity tables for all configured virtual balancers on the router.
1.3.6.1.4.1.207.8.4.4.4.104.5.1RowlbShowAffEntrynot-accessiblemandatoryAn entry in the affinity table.
1.3.6.1.4.1.207.8.4.4.4.104.5.1.1ColumnlbAffIndexread-onlymandatoryThe index for the affinity table.
1.3.6.1.4.1.207.8.4.4.4.104.5.1.2ColumnlbAffVirtBalread-onlymandatoryThe name of the virtual balancer whose affinity table is being displayed.
1.3.6.1.4.1.207.8.4.4.4.104.5.1.3ColumnlbAffClientIpread-onlymandatoryThe IP address that has affinity to the given resource.
1.3.6.1.4.1.207.8.4.4.4.104.5.1.4ColumnlbAffCookieread-onlymandatoryThe cookie that has affinity to the given resource.
1.3.6.1.4.1.207.8.4.4.4.104.5.1.5ColumnlbAffResourceread-onlymandatoryThe name of the resource that the Client IP/Cookie has an affinity for.
1.3.6.1.4.1.207.8.4.4.4.104.5.1.6ColumnlbAffExpiryread-onlymandatoryThe amount of seconds left before this entry expires, and is removed from the affinity table.
1.3.6.1.4.1.207.8.4.4.4.104.6TablelbShowConTablenot-accessiblemandatoryA list about all of the TCP connections currently open to a given virtual balancer.
1.3.6.1.4.1.207.8.4.4.4.104.6.1RowlbShowConEntrynot-accessiblemandatoryAn entry in the connections table.
1.3.6.1.4.1.207.8.4.4.4.104.6.1.1ColumnlbConIndexread-onlymandatoryThe index for the connections table.
1.3.6.1.4.1.207.8.4.4.4.104.6.1.2ColumnlbConVirtBalread-onlymandatoryThe name of the virtual balancer the listed connections are to.
1.3.6.1.4.1.207.8.4.4.4.104.6.1.3ColumnlbConClientIpread-onlymandatoryThe IP address of that originated the connection.
1.3.6.1.4.1.207.8.4.4.4.104.6.1.4ColumnlbConPortread-onlymandatoryThe port on the originating system that represents the other end of the connection.
1.3.6.1.4.1.207.8.4.4.4.104.6.1.5ColumnlbConResourceread-onlymandatoryThe name of the resource that the connection has been made to.
1.3.6.1.4.1.207.8.4.4.4.109Nodeds3module
1.3.6.1.4.1.207.8.4.4.4.109.1Tableds3TrapTablenot-accessiblemandatoryThe ATR enterprise DS3 trap table.
1.3.6.1.4.1.207.8.4.4.4.109.1NodetcaTrapA DS3 trap is generated when a threshold crossing alert occurs. This happens when an error count exceeds a pre determined value. The values are counted over 15…
1.3.6.1.4.1.207.8.4.4.4.109.1.1Rowds3TrapEntrynot-accessiblemandatoryAn entry in the ATR enterprise DS3 trap table.
1.3.6.1.4.1.207.8.4.4.4.109.1.1.1Columnds3TcaTrapEnableread-writemandatoryIndicates whether the threshold crossing alert traps should be generated for this interface.
1.3.6.1.4.1.207.8.4.4.4.109.1.1.2Columnds3TrapErrorread-onlymandatoryThis variable shows which kind of parameter or primitive caused the trap. This variable is really just a placeholder for the object sent in the DS3 TRAP, but c…
1.3.6.1.4.1.207.8.4.4.4.109.1.1.3Columnds3TrapLocread-onlymandatoryThis variable shows whether the trap was caused by a problem at the local or remote end. This variable is really just a placeholder for the object sent in the …
1.3.6.1.4.1.207.8.4.4.4.109.1.1.4Columnds3TrapIntervalread-onlymandatoryThis variable shows whether the counter which has crossed the threshold is a twenty four hour or fifteen minute counter. This variable is really just a placeho…
1.3.6.1.4.1.207.8.4.4.5NodearInterfaces
1.3.6.1.4.1.207.8.4.4.5.1ScalararBoardMaxIndexread-onlymandatoryThe maximum index of boards in the board table. Index 1 is reserved for the main system board of the router.
1.3.6.1.4.1.207.8.4.4.5.2TablearBoardTablenot-accessiblemandatoryThe table of boards in the AR router.
1.3.6.1.4.1.207.8.4.4.5.2.1RowarBoardEntrynot-accessiblemandatoryA single entry in the board table. Each entry consists of information about one board in the router.
1.3.6.1.4.1.207.8.4.4.5.2.1.1ColumnarBoardIndexread-onlymandatoryThe index of the board in the board table. Index 1 is reserved for the main system board of the router. Other boards will take index numbers as they are initia…
1.3.6.1.4.1.207.8.4.4.5.2.1.2ColumnarBoardIdread-onlymandatoryThe type of board in this board entry. The values of this object are taken from the pprXxx object IDs under the boards sub-tree.
1.3.6.1.4.1.207.8.4.4.5.2.1.3ColumnarBoardNameread-onlymandatoryThe name of the board in this board entry. This is a readable string which identifies the board to the manager.
1.3.6.1.4.1.207.8.4.4.5.2.1.4ColumnarBoardRevisionread-onlymandatoryThe manufacturing revision of the board in this board entry. This string has the format Xm-n, where X is P for prototype, or M for manufacturing, m is the majo…
1.3.6.1.4.1.207.8.4.4.5.2.1.5ColumnarBoardSerialNumberread-onlymandatoryThe serial number of the board in this board entry. Serial numbers are strings of decimal numbers up to 10 digits in length. Each and every serial number is gl…
1.3.6.1.4.1.207.8.4.4.5.2.1.6ColumnarBoardTotalSlotsread-onlymandatoryThe number of slots on this board. Each slot from 1 to the value of this object may be empty or occupied by another board. By searching the arSlotTable with th…
1.3.6.1.4.1.207.8.4.4.5.2.1.7ColumnarBoardTotalPositionsread-onlymandatoryThe number of positions on this board. Each position from 1 to the value of this object contains a single router interface. Note that positions are different f…
1.3.6.1.4.1.207.8.4.4.5.3TablearSlotTablenot-accessiblemandatoryThe table of slots in the router, indexed by board index and slot index.
1.3.6.1.4.1.207.8.4.4.5.3.1RowarSlotEntrynot-accessiblemandatoryA single entry in the board slot table.
1.3.6.1.4.1.207.8.4.4.5.3.1.1ColumnarSlotBoardIndexread-onlymandatoryThe index of the board for this slot entry. Index 1 is reserved for the main system board of the router.
1.3.6.1.4.1.207.8.4.4.5.3.1.2ColumnarSlotSlotIndexread-onlymandatoryThe index of the slot for this slot entry. Indices start from 1 and are specific to each different board type. There are no gaps in the sequence of slot indice…
1.3.6.1.4.1.207.8.4.4.5.3.1.3ColumnarSlotHeldBoardIndexread-onlymandatoryThe index of the board held in the slot for this slot entry. This is an index into the arBoardTable. A value of 0 for this object means that the slot is not po…
1.3.6.1.4.1.207.8.4.4.5.3.1.4ColumnarSlotDescriptionread-onlymandatoryA description for this slot entry. This is a textual description which gives the manager a clue as to what the slot for this entry is. For example, the slots o…
1.3.6.1.4.1.207.8.4.4.5.4TablearInterfaceTablenot-accessiblemandatoryThe table of physical interfaces in the AR router.
1.3.6.1.4.1.207.8.4.4.5.4.1RowarInterfaceEntrynot-accessiblemandatoryA single entry in the interface table. Each entry consists of information about one interface in the router, and is indexed by the board index and the position…
1.3.6.1.4.1.207.8.4.4.5.4.1.1ColumnarInterfaceBoardIndexread-onlymandatoryThe index of the board in the board table which contains this interface. Index 1 is reserved for the main system board of the router.
1.3.6.1.4.1.207.8.4.4.5.4.1.2ColumnarInterfacePositionread-onlymandatoryThe position of the interface on the board. Each board type will have well-known positions which are the interfaces provided by the board. The number of positi…
1.3.6.1.4.1.207.8.4.4.5.4.1.3ColumnarInterfaceIfIndexread-onlymandatoryThe ifIndex for the interface represented by this entry of the interfaces table. This is the ifIndex of the ifEntry used to represent the physical interface. T…
1.3.6.1.4.1.207.8.4.4.5.4.1.4ColumnarInterfaceNameread-onlymandatoryThe name of this interface. This is the name that the manager can use to refer to this interface in entering router commands.
1.3.6.1.4.1.207.8.4.4.5.4.1.5ColumnarInterfaceFullNameread-onlymandatoryThe fully qualified name for this interface. This identifies the path that must be followed to reach the interface. This name can be used in router commands. I…
1.3.6.1.4.1.207.8.4.4.5.5TablearIfXTablenot-accessiblemandatoryThe table of interface statistics for the AR router. This table extends the ifTable.
1.3.6.1.4.1.207.8.4.4.5.5.1RowarIfXEntrynot-accessiblemandatoryA single entry in the interface extension table. Each entry consists of extra interface information not covered in standard MIBs. The index for this table is i…
1.3.6.1.4.1.207.8.4.4.5.5.1.1ColumnarIfXIndexread-onlymandatoryThe index of the ifTable.
1.3.6.1.4.1.207.8.4.4.5.5.1.2ColumnarIfXAverageInputBitsSecondread-onlymandatoryThe average number of bits received per second on all interfaces over the past 8.5 minutes. The average is calculated by an 8.5 minute (512s) decaying average,…
1.3.6.1.4.1.207.8.4.4.5.5.1.3ColumnarIfXAverageInputPacketsSecondread-onlymandatoryThe average number of packets received per second on all interfaces over the past 8.5 minutes. See the description for arIfXAverageInputBitsSecond for details …
1.3.6.1.4.1.207.8.4.4.5.5.1.4ColumnarIfXAverageOutputBitsSecondread-onlymandatoryThe average number of bits sent per second on all interfaces over the past 8.5 minutes. See the description for arIfXAverageInputBitsSecond for details of the …
1.3.6.1.4.1.207.8.4.4.5.5.1.5ColumnarIfXAverageOutputPacketsSecondread-onlymandatoryThe average number of bits sent per second on all interfaces over the past 8.5 minutes. See the description for arIfXAverageInputBitsSecond for details of the …
1.3.6.1.4.1.207.8.4.4.6Nodeprotocols
Type Definitions
NameSyntaxStatusDescription
InterfaceIndexOrZeroINTEGER (0..2147483647)