MIB Viewer

ALLOT-MIB

388 objects
Newly formed Allot enterprise MIB designed for the next generation NMS.
Imported Objects
IF-MIBifIndex InterfaceIndex InterfaceIndexOrZero
SNMPv2-CONFMODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP
SNMPv2-SMICounter32 Counter64 enterprises Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-IDENTITY OBJECT-TYPE Unsigned32
SNMPv2-TCDateAndTime DisplayString RowStatus TEXTUAL-CONVENTION TimeStamp VariablePointer
OIDNameAccessStatusDescription
1.3.6.1.4.1.2603IdentityalRegMIBNewly formed Allot enterprise MIB designed for the next generation NMS.
1.3.6.1.4.1.2603.0NodealEvents
1.3.6.1.4.1.2603.0.1NotificationalDeviceConfChangeTrapcurrentIs to be send when one of generic status variables is changed. The mentioned statuses are defined on the device level. The actual variable is defined via alGen…
1.3.6.1.4.1.2603.0.2NotificationalCatalogConfChangeTrapcurrentConfiguration change event on one of the catalogs
1.3.6.1.4.1.2603.0.3NotificationalLineConfChangeTrapcurrentConfiguration change occurs on one of the lines
1.3.6.1.4.1.2603.0.4NotificationalPipeConfChangeTrapcurrentThe configuration change occurs on one of the pipes
1.3.6.1.4.1.2603.0.5NotificationalVCConfChangeTrapcurrentThe configuration change occurs on one of the VCs
1.3.6.1.4.1.2603.0.6NotificationalAlertRisingTrapcurrentOne of the alerts crossed the threshold
1.3.6.1.4.1.2603.0.7NotificationalAlertFallingTrapcurrentThe alert' value returned to the normal level
1.3.6.1.4.1.2603.0.8NotificationalDosAttackOnTrapcurrentDOS attack is identified
1.3.6.1.4.1.2603.0.9NotificationalDosAttackOffTrapcurrentDOS attack is over
1.3.6.1.4.1.2603.0.10NotificationalDataSourceDownTrapcurrentData source is unreachable
1.3.6.1.4.1.2603.0.11NotificationalDataSourceUpTrapcurrentData source is now reachable
1.3.6.1.4.1.2603.0.12NotificationalSoftwareProblemTrapcurrentSevere problem occured. The trap can't be blocked (disabled).
1.3.6.1.4.1.2603.0.13NotificationalAccessViolationTrapcurrentAccess violation attempt is discovered
1.3.6.1.4.1.2603.0.14NotificationalIpAddrConfChangeTrapcurrentIp Address added or removed.
1.3.6.1.4.1.2603.0.15NotificationalConnRouteConfChangeTrapcurrentConnection routing configuration change trap
1.3.6.1.4.1.2603.0.16NotificationalDeviceStatusUpTrapcurrent
1.3.6.1.4.1.2603.0.17NotificationalDeviceStatusDownTrapcurrent
1.3.6.1.4.1.2603.0.18NotificationalApplicationInfoTrapcurrentApplication general information trap blocked (disabled).
1.3.6.1.4.1.2603.0.19NotificationalBoardStatusChangeTrapcurrentThis trap is sent on changing software or hardware status of board
1.3.6.1.4.1.2603.0.20NotificationalWebUpdateTrapcurrentThis trap will be sent for each attempted web update
1.3.6.1.4.1.2603.0.21NotificationalAsymmetricRemoteDeviceConfTrapcurrentConfiguration of the asymmetric remote device is changed or device added/removed.
1.3.6.1.4.1.2603.0.22NotificationalAsymmetricRemoteDeviceStatusTrapcurrentIs to be send when health check of remote device is changed
1.3.6.1.4.1.2603.0.23NotificationalLicenseWarnEventTrapcurrentThis trap is sent on Erroneous states of the license
1.3.6.1.4.1.2603.0.24NotificationalLicenseCritEventTrapcurrentThis trap is sent in for critical level conditions of the license
1.3.6.1.4.1.2603.0.25NotificationalBoardTemperatureStatusTrapcurrentThis trap is sent when temperature crosses range border
1.3.6.1.4.1.2603.0.26NotificationalURLFilteringUpdateTrapcurrentThis trap will be sent for each attempted websafe update
1.3.6.1.4.1.2603.4NodealActivation
1.3.6.1.4.1.2603.4.1ScalaralActivationKeyread-writecurrentActivation key for the current product.
1.3.6.1.4.1.2603.4.2ScalaralActivationModelread-onlycurrentProduct Name
1.3.6.1.4.1.2603.4.3ScalaralSysExpirationDateread-onlycurrentSystem expiration date
1.3.6.1.4.1.2603.4.4ScalaralQoSIsEnabledread-onlycurrentShows whether the license enables QoS capability.
1.3.6.1.4.1.2603.4.5ScalaralQoSExpirationDateEnableread-onlycurrentQoS capability expiration date enabled or disabled..
1.3.6.1.4.1.2603.4.6ScalaralCacheIsEnabledread-onlycurrentThe redirection to proxy cache is enabled (on/off)
1.3.6.1.4.1.2603.4.7ScalaralCacheExpirationDateEnableread-onlycurrentEnabling the expiration date for the cache redirection.
1.3.6.1.4.1.2603.4.8ScalaralLoadBalancingIsEnabledread-onlycurrentThe capability of load balancing is enabled (on/off).
1.3.6.1.4.1.2603.4.9ScalaralLoadBalancingExpirationDateEnableread-onlycurrentEnabling the expiration date for the active load balancing.
1.3.6.1.4.1.2603.4.10NodealActivationLimits
1.3.6.1.4.1.2603.4.10.1ScalaralLinePerPolicyread-onlycurrentLicense lines limitation
1.3.6.1.4.1.2603.4.10.2ScalaralPipePerPolicyread-onlycurrentLicense pipes limitation
1.3.6.1.4.1.2603.4.10.3ScalaralVcPerPolicyread-onlycurrentLicense VCs limitation
1.3.6.1.4.1.2603.4.10.4ScalaralMaxBandwidthread-onlycurrentLicense bandwidth limitation in bps
1.3.6.1.4.1.2603.4.10.5ScalaralMaxConnectionsread-onlycurrentLicense connection limitation
1.3.6.1.4.1.2603.4.11ScalaralLTCollectionEnabledread-onlycurrentenables or disables long term collection in the server
1.3.6.1.4.1.2603.4.12ScalaralWebUpdateIsEnabledread-onlycurrentShows whether the license enables web update capability.
1.3.6.1.4.1.2603.4.13ScalaralWebUpdateExpirationDateEnableread-onlycurrentEnabling the expiration date for the web update.
1.3.6.1.4.1.2603.4.14TablealLicenseInfoTablenot-accessiblecurrentLicense information table
1.3.6.1.4.1.2603.4.14.1RowalLicenseInfoEntrynot-accessiblecurrent
1.3.6.1.4.1.2603.4.14.1.1ColumnalLicenseAttrTyperead-onlycurrentTypes of license statuses
1.3.6.1.4.1.2603.4.14.1.2ColumnalLicenseLimitTyperead-onlycurrentTypes of license limit
1.3.6.1.4.1.2603.4.14.1.3ColumnalLicenseAttrNameread-onlycurrent
1.3.6.1.4.1.2603.4.14.1.4ColumnalLimitValueread-onlycurrent
1.3.6.1.4.1.2603.4.14.1.5ColumnalLicenseStatusread-onlycurrentTypes of license statuses
1.3.6.1.4.1.2603.4.14.1.6ColumnalLicenseIsCurrValueread-onlycurrent
1.3.6.1.4.1.2603.4.14.1.7ColumnalLicenseCurrValueread-onlycurrent
1.3.6.1.4.1.2603.4.15ScalaralLicenseEventTyperead-onlycurrentTypes of license statuses
1.3.6.1.4.1.2603.5NodealObjects
1.3.6.1.4.1.2603.5.1NodealProducts
1.3.6.1.4.1.2603.5.1.1IdentityalAC200currentAC-20x series: AC-201, AC-202, AC-204
1.3.6.1.4.1.2603.5.1.2IdentityalAC400currentAC-40x series: AC-402, AC-404
1.3.6.1.4.1.2603.5.1.3IdentityalAC800currentAC-80x series: AC-802, AC-804, AC-808
1.3.6.1.4.1.2603.5.1.4IdentityalAC1000currentAC-1000 series: various models of AC-10x0
1.3.6.1.4.1.2603.5.1.5IdentityalAC2500currentAC-2500 series: various models of AC-25x0
1.3.6.1.4.1.2603.5.1.6IdentityalMediationDevicecurrentMediation device series: various models (currently Short Time Collector only)
1.3.6.1.4.1.2603.5.1.7IdentityalSG20currentSG-20G device( ATCA complient)
1.3.6.1.4.1.2603.5.1.8IdentityalAC10000currentAC10K series
1.3.6.1.4.1.2603.5.1.9IdentityalACSigmacurrentACSigma series.
1.3.6.1.4.1.2603.5.1.10IdentityalAC5KcurrentAC5K series
1.3.6.1.4.1.2603.5.1.11IdentityalAC3KcurrentAC3K series
1.3.6.1.4.1.2603.5.1.12IdentityalAC10Kcurrentnew AC10K series
1.3.6.1.4.1.2603.5.1.13IdentityalAC1KcurrentAC1K series
1.3.6.1.4.1.2603.5.1.14IdentityalACSigmaE14currentSigmaE 14 slots series
1.3.6.1.4.1.2603.5.1.15IdentityalAC500currentAC500 series
1.3.6.1.4.1.2603.5.1.16IdentityalACSigmaE6currentSigmaE 6 slots series
1.3.6.1.4.1.2603.5.2NodealGeneric
1.3.6.1.4.1.2603.5.2.1ScalaralConfigurationNameread-writecurrentThe name of this configuration 'image'. Is used in case of save configuration command.
1.3.6.1.4.1.2603.5.2.3ScalaralDoubleSessionread-writecurrentExternal router and internal server. Enable(1)/Disable(2)/NA(3)
1.3.6.1.4.1.2603.5.2.6NodealGeneralSystem
1.3.6.1.4.1.2603.5.2.6.1ScalaralDateTimeread-writecurrentThe item provides the ability to synchronize the reporting system via SNMP
1.3.6.1.4.1.2603.5.2.6.2ScalaralTimeZoneread-writecurrentMay be used for the reporting purposes.
1.3.6.1.4.1.2603.5.2.6.3TablealIfXTablenot-accessiblecurrentAllot's extansion to the interface table
1.3.6.1.4.1.2603.5.2.6.3.1RowalIfXEntrynot-accessiblecurrentEntry for the interface table extention
1.3.6.1.4.1.2603.5.2.6.3.1.1ColumnalIfXModeread-writecurrentAuto/half-duplex or full duplex mode
1.3.6.1.4.1.2603.5.2.6.3.1.2ColumnalIfXTyperead-writecurrentInterface 'role' (Allot specific).
1.3.6.1.4.1.2603.5.2.6.3.1.3ColumnalIfXSpeedread-writecurrentSpeed option
1.3.6.1.4.1.2603.5.2.6.3.1.4ColumnalIfXOrderread-writecurrentdefines the first (source, root) physical interface among all physical interfaces contained in virtual interfaces (e.g. mirror) based on ordered links
1.3.6.1.4.1.2603.5.2.6.3.1.5ColumnalIfXLabelread-onlycurrentAdministrative name of interface.
1.3.6.1.4.1.2603.5.2.6.3.1.6ColumnalIfXSupportedread-onlycurrentBit mask that describes port options Bits 1-12 related to speed and duplex mode. 10baseT_Half - ( bit 1) 10baseT_Full - ( bit 2) 100baseT_Half - ( bit 3) 100ba…
1.3.6.1.4.1.2603.5.2.6.3.1.7ColumnalIfXActualModeread-onlycurrentActual status of duplex mode
1.3.6.1.4.1.2603.5.2.6.3.1.8ColumnalIfXActionread-writecurrentDefines action in case of interface link down. Possible actions: (2) Force 'down' the peering interface (3) force down 'all' interfaces (4) move the box to the…
1.3.6.1.4.1.2603.5.2.6.3.1.9ColumnalIfXUsageread-writecurrentShows the current port usage type
1.3.6.1.4.1.2603.5.2.6.3.1.10ColumnalIfXSwitchIdread-onlycurrentIdentification of switch, that current interface associated with
1.3.6.1.4.1.2603.5.2.6.3.1.11ColumnalIfXSwitchPortread-onlycurrentPort index in switch.
1.3.6.1.4.1.2603.5.2.6.3.1.12ColumnalIfXUsageCapabilityread-onlycurrentBit mask that describes port usage options network- (bit 1) indirect redirect- (bit 2) direct redirect - (bit 3) clone- (bit 4) storage- (bit 5) asymmetry- (bi…
1.3.6.1.4.1.2603.5.2.6.3.1.13ColumnalIfXThroughputTXread-onlycurrentBytes per second for TX
1.3.6.1.4.1.2603.5.2.6.3.1.14ColumnalIfXThroughputRXread-onlycurrentBytes per second for RX
1.3.6.1.4.1.2603.5.2.6.3.1.15ColumnalIfXPacketPerSecondTXread-onlycurrentPacket per second for TX
1.3.6.1.4.1.2603.5.2.6.3.1.16ColumnalIfXPacketPerSecondRXread-onlycurrentPacket per second for RX
1.3.6.1.4.1.2603.5.2.6.3.1.17ColumnalIfXSTPStatusread-writecurrentSpanning tree status
1.3.6.1.4.1.2603.5.2.6.3.1.18ColumnalIfXSTPSupportread-onlycurrentBit mask that describes STP options enable- (bit 1) disable- (bit 2) notAplicable - (bit 3)
1.3.6.1.4.1.2603.5.2.6.4NodealSystemNetwork
1.3.6.1.4.1.2603.5.2.6.4.1ScalaralHostnameread-writecurrentName of host
1.3.6.1.4.1.2603.5.2.6.4.2ScalaralDomainNameread-writecurrentDomain name
1.3.6.1.4.1.2603.5.2.6.4.3ScalaralInBandGatewayread-writecurrentFor connection contol (if needed) and in-band management (not AC1000). If OOB exists, the connection control applies proprietary solution for routing.
1.3.6.1.4.1.2603.5.2.6.4.4ScalaralOutOfBandGatewayread-writecurrentDefault gateway for out-of-band.
1.3.6.1.4.1.2603.5.2.6.4.5TablealConnRouteTablenot-accessiblecurrentStatic routes table
1.3.6.1.4.1.2603.5.2.6.4.5.1RowalConnRouteEntrynot-accessiblecurrent
1.3.6.1.4.1.2603.5.2.6.4.5.1.1ColumnalConnRouteAddressnot-accessiblecurrentIp address for the entry(host or subnet)
1.3.6.1.4.1.2603.5.2.6.4.5.1.2ColumnalConnRouteNetMaskread-createcurrentnetwork mask
1.3.6.1.4.1.2603.5.2.6.4.5.1.3ColumnalConnRouteGatewayread-createcurrentIP address for the router of this route
1.3.6.1.4.1.2603.5.2.6.4.5.1.4ColumnalConnRouteIfIndexread-createcurrentinterface index (ifTable) for the interface of this route
1.3.6.1.4.1.2603.5.2.6.4.5.1.5ColumnalConnRouteTyperead-createcurrentdestination type (network or host) of this route
1.3.6.1.4.1.2603.5.2.6.4.5.1.6ColumnalConnRouteEntryStatusread-createcurrentrow status
1.3.6.1.4.1.2603.5.2.6.5NodealSystemStatus
1.3.6.1.4.1.2603.5.2.6.5.1ScalaralBypassSettingread-onlycurrentIn parallel redundancy only. The setting is read from the hardware.
1.3.6.1.4.1.2603.5.2.6.5.2ScalaralPowerread-onlycurrentStatus in power suplies: 1-OK, 2- problem in ps0, 3- problem in ps1 4- not applicable
1.3.6.1.4.1.2603.5.2.6.5.3ScalaralFanread-onlycurrentStatus of fans: 1- unknown, 2-OK, 3-problem.
1.3.6.1.4.1.2603.5.2.6.5.4ScalaralRemoteBypassread-onlycurrentBypass status for the remote unit
1.3.6.1.4.1.2603.5.2.6.5.5ScalaralBypassread-onlycurrentBypass status
1.3.6.1.4.1.2603.5.2.6.6NodealSystemSecurity
1.3.6.1.4.1.2603.5.2.6.6.1ScalaralHTTPConnectionModeread-writecurrentEnable/ disable unsecure uaccess to HTTP port (enable -unsecure access, disable -secure access only, NA)
1.3.6.1.4.1.2603.5.2.6.6.2ScalaralTelnetAccessread-writecurrentis telnet access allowed
1.3.6.1.4.1.2603.5.2.6.6.3ScalaralPingReplyread-writecurrentIs ping reply allowed?
1.3.6.1.4.1.2603.5.2.6.6.4ScalaralEnhancedTcpSecurityread-writecurrentIs enhanced TCP security allowed?
1.3.6.1.4.1.2603.5.2.6.6.5ScalaralLcdConfigEnableread-writecurrentAllows management from box LCD control panel. (Enable/Disable/NA)
1.3.6.1.4.1.2603.5.2.6.6.6ScalaralConnectionTimeoutread-writecurrentThe timeout while connected via console or telnet. The shells will automatically logout after the specified number of seconds. If 0 - no automatic logout
1.3.6.1.4.1.2603.5.2.6.6.7TablealACTablenot-accessiblecurrentAccess list: IP addresses that are allowed to connect to the box.
1.3.6.1.4.1.2603.5.2.6.6.7.1RowalACEntrynot-accessiblecurrentEntry of the access control table
1.3.6.1.4.1.2603.5.2.6.6.7.1.1ColumnalACIPAddrnot-accessiblecurrentIP address of the entry
1.3.6.1.4.1.2603.5.2.6.6.7.1.2ColumnalACDescrread-createcurrentDescription
1.3.6.1.4.1.2603.5.2.6.6.7.1.3ColumnalACRowStatusread-createcurrentThis variable is used for create, modify, and/or delete a row in this table.
1.3.6.1.4.1.2603.5.2.6.6.8ScalaralSshSecurityread-writecurrentIs SSH allowed?
1.3.6.1.4.1.2603.5.2.6.7TablealIpXAddrTablenot-accessiblecurrentExtension to ipIfXTable - serves for managing the IP adresses (add/remove) and contains one additional parameter - VLAN tag
1.3.6.1.4.1.2603.5.2.6.7.1RowalIpXAddrEntrynot-accessiblecurrent
1.3.6.1.4.1.2603.5.2.6.7.1.1ColumnalIpXAddrread-createcurrentThe IP address to which this entry's addressing information pertains.
1.3.6.1.4.1.2603.5.2.6.7.1.2ColumnalIpXNetMaskread-createcurrentThe subnet mask associated with the IP address of this entry. The value of the mask is an IP address with all the network bits set to 1 and all the hosts bits …
1.3.6.1.4.1.2603.5.2.6.7.1.3ColumnalIpXVlanread-createcurrentVLAN tag
1.3.6.1.4.1.2603.5.2.6.7.1.4ColumnalIpXEntryStatusread-createcurrentrow status
1.3.6.1.4.1.2603.5.2.6.8ScalaralModeread-writecurrentControls the working mode of box: 1- regular, 2-TAP, 3-nonApplicable
1.3.6.1.4.1.2603.5.2.6.9ScalaralLearningBridgeread-writecurrentStatus of learning for the bridge function (on/off/NA).
1.3.6.1.4.1.2603.5.2.6.10ScalaralSPTStatusread-writecurrentSpanning tree status
1.3.6.1.4.1.2603.5.2.6.11ScalaralRedunduncyModeread-writecurrentChoice of redundancy model
1.3.6.1.4.1.2603.5.2.6.12ScalaralBoxSerialNumberread-onlycurrentSerial number of the box. Identifies the current product instance.
1.3.6.1.4.1.2603.5.2.6.13ScalaralSoftwareVersionread-onlycurrentIdentification of the software version
1.3.6.1.4.1.2603.5.2.6.14ScalaralBackplaneVersionread-onlycurrentBackplane (hardware) version.
1.3.6.1.4.1.2603.5.2.6.15TablealPosIfTablenot-accessiblecurrentConfiguration of POS.
1.3.6.1.4.1.2603.5.2.6.15.1RowalPosIfEntrynot-accessiblecurrent
1.3.6.1.4.1.2603.5.2.6.15.1.1ColumnalPosIfIndexnot-accessiblecurrent
1.3.6.1.4.1.2603.5.2.6.15.1.2ColumnalPosIfTyperead-writecurrentType of POS port
1.3.6.1.4.1.2603.5.2.6.15.1.3ColumnalPosIfFramingread-writecurrent
1.3.6.1.4.1.2603.5.2.6.15.1.4ColumnalPosIfCrcread-writecurrent
1.3.6.1.4.1.2603.5.2.6.15.1.5ColumnalPosIfClockingread-writecurrent
1.3.6.1.4.1.2603.5.2.6.15.1.6ColumnalPosIfScramblingread-writecurrent
1.3.6.1.4.1.2603.5.2.6.15.1.7ColumnalPosIfEncapsulationread-writecurrent
1.3.6.1.4.1.2603.5.2.6.15.1.8ColumnalPosIfMturead-writecurrent
1.3.6.1.4.1.2603.5.2.6.16ScalaralRedundancyCapread-onlycurrentBit-mask of the redundancy options, depending of the hardware platform. 0x1 mask- parallel; 0x2 mask-serial; 0x4 mask- active
1.3.6.1.4.1.2603.5.2.6.17ScalaralBypassUnitread-writecurrentEnable/disable the usage of the bypass unit
1.3.6.1.4.1.2603.5.2.6.18NodealDeviceBWLimits
1.3.6.1.4.1.2603.5.2.6.18.1ScalaralDeviceBWLimitsTyperead-writecurrentDefines the working mode of the device
1.3.6.1.4.1.2603.5.2.6.18.2ScalaralDeviceBWLimitsOutboundread-writecurrentMaximum value (in Kbits/sec) for outbound (internal) direction speed The value has range of min=1, max=Licenesed maximum value of 0 (zero) stands for device ma…
1.3.6.1.4.1.2603.5.2.6.18.3ScalaralDeviceBWLimitsInboundread-writecurrentMaximum value (in Kbits/sec) for inbound (external) direction speed The value has range of min=1, max=Licenesed maximum value of 0 (zero) stands for device max…
1.3.6.1.4.1.2603.5.2.6.19NodealSystemCOC
1.3.6.1.4.1.2603.5.2.6.19.1ScalaralCocServerTimeOutread-writecurrentCOC server time out
1.3.6.1.4.1.2603.5.2.6.19.2ScalaralCocServerRetriesread-writecurrentCOC server retries
1.3.6.1.4.1.2603.5.2.6.19.3ScalaralCocServerPeriodread-writecurrentCOC server period
1.3.6.1.4.1.2603.5.2.6.19.4ScalaralCocServiceTimeOutread-writecurrentCOC service time out
1.3.6.1.4.1.2603.5.2.6.19.5ScalaralCocServiceRetriesread-writecurrentCOC service retries
1.3.6.1.4.1.2603.5.2.6.19.6ScalaralCocServicerPeriodread-writecurrentCOC server period
1.3.6.1.4.1.2603.5.2.6.19.7ScalaralCocTrackerMACread-writecurrentCOC tracker MAC address
1.3.6.1.4.1.2603.5.2.6.19.8ScalaralCocRedirectionMACread-writecurrentCOC redirection MAC address
1.3.6.1.4.1.2603.5.2.6.19.9ScalaralCocUseIpread-writecurrentIf COC uses IP
1.3.6.1.4.1.2603.5.2.6.19.10ScalaralCocRedirectionPortread-writecurrentCoc redirection of ports
1.3.6.1.4.1.2603.5.2.6.20NodealInternalRedundancy
1.3.6.1.4.1.2603.5.2.6.20.1TablealBoardTablenot-accessiblecurrent
1.3.6.1.4.1.2603.5.2.6.20.1.1RowalBoardEntrynot-accessiblecurrent
1.3.6.1.4.1.2603.5.2.6.20.1.1.1ColumnalBoardIdnot-accessiblecurrentrepresents slot number of board
1.3.6.1.4.1.2603.5.2.6.20.1.1.2ColumnalBoardTyperead-onlycurrentdescribes type of board: 1- third party board 2- APC board 3- DPIC board 4- Host board 5- BYC (bypass & switch) 6- Spider 7- Scorpion 8- Switch 9- Dispatcher 1…
1.3.6.1.4.1.2603.5.2.6.20.1.1.3ColumnalBoardSerialNumberread-onlycurrentSerial number of board (taken from this boad)
1.3.6.1.4.1.2603.5.2.6.20.1.1.4ColumnalBoardSoftwareVersionread-onlycurrentVersion of software, which running on the board
1.3.6.1.4.1.2603.5.2.6.20.1.1.5ColumnalBoardHardwareVersionread-onlycurrentHardware version of board
1.3.6.1.4.1.2603.5.2.6.20.1.1.6ColumnalBoardSoftwareStatusread-onlycurrentShows status of software on the board: (1)-notActive (Bypass for DPIC) (2)-active (3)-standBy (4)-notApplicable
1.3.6.1.4.1.2603.5.2.6.20.1.1.7ColumnalBoardHWStatusread-onlycurrentShows physical status of card: (1) - off (no power or not existed) (2) - on (OK)
1.3.6.1.4.1.2603.5.2.6.20.1.1.8ColumnalBoardTemperatureRangeread-onlycurrentTemperature threshold ranges are defined in the following way: Below Non-Critical Threshold - Low range Between Non-Critical and Critical Threshold - Middle ra…
1.3.6.1.4.1.2603.5.2.6.20.2ScalaralInternalDispatchModeread-writecurrentControls traffic dispatching mechanism: 1- Dynamic dispatching mode- the system distributes the traffic automatically between the different QoS devices. 2- Sta…
1.3.6.1.4.1.2603.5.2.6.20.3ScalaralInternalMinDevNumread-writecurrentMinimal number of active Qos devices for activation of system.
1.3.6.1.4.1.2603.5.2.6.20.4ScalaralInternalRedundancyDevNumread-writecurrentNumber of QoS devices in standby mode.
1.3.6.1.4.1.2603.5.2.6.20.5ScalaralInternalActiveDevNumread-writecurrentNumber of QoS devices in ACTIVE mode in same time.
1.3.6.1.4.1.2603.5.2.6.20.6ScalaralInternalRateLimitread-writecurrentMaximum bandwidth for QoS device (in Kbytes/sec).
1.3.6.1.4.1.2603.5.2.6.21NodealWebUpdate
1.3.6.1.4.1.2603.5.2.6.21.1ScalaralBaseVersionread-onlycurrentHolds the base version of the protocols engine
1.3.6.1.4.1.2603.5.2.6.21.2ScalaralCurrentVersionread-onlycurrentThe version of the current protocols engine.
1.3.6.1.4.1.2603.5.2.6.21.3ScalaralLastUpdateStatusread-onlycurrentThe error code of the last attempted web update. Error codes are: 1 Success 2 General Error 3 Wrong version 4 XML file format is wrong 5 Binary file corrupted …
1.3.6.1.4.1.2603.5.2.6.22NodealUserDefinedSignature
1.3.6.1.4.1.2603.5.2.6.22.1ScalaralUDSStateread-writecurrentCondition of 'User Defined Signature' feature
1.3.6.1.4.1.2603.5.2.6.23NodealAsymmetric
1.3.6.1.4.1.2603.5.2.6.23.1ScalaralAsymmetricGroupIdread-writecurrentDefine the asymmetric group ID of the local device
1.3.6.1.4.1.2603.5.2.6.23.2ScalaralAsymmetricOwnDeviceIdread-writecurrentLocal device ID within the asymmetric group
1.3.6.1.4.1.2603.5.2.6.23.3ScalaralAsymmetricHealthCheckread-writecurrentEnables health check of communication channel to remote devices in the asymmetric group
1.3.6.1.4.1.2603.5.2.6.23.5ScalaralAsymmetricTransportTyperead-writecurrentTransport type of communication channel to remote devices in the asymmetric group: - L2 p2p (point to point) - L2 Bridge (MAC forwarding) - L3 (Future)
1.3.6.1.4.1.2603.5.2.6.23.6ScalaralAsymmetricEnableread-writecurrentEnables asymmetry capabilities on device
1.3.6.1.4.1.2603.5.2.6.23.7TablealAsymmetricDeviceTablenot-accessiblecurrentList of remote devices in the asymmetric group where the local device is member
1.3.6.1.4.1.2603.5.2.6.23.7.1RowalAsymmetricDeviceEntrynot-accessiblecurrent
1.3.6.1.4.1.2603.5.2.6.23.7.1.1ColumnalAsymmetricRemoteDeviceIdnot-accessiblecurrentDevice ID (in the asymmetric group) of remote device
1.3.6.1.4.1.2603.5.2.6.23.7.1.2ColumnalAsymmetricControlVLANread-createcurrentVLAN ID Used to carry asymmetric control traffic of flows. Use if transport type is p2p
1.3.6.1.4.1.2603.5.2.6.23.7.1.4ColumnalAsymmetricPortread-createcurrentAsymmetric control port (interface). Must be one of ifIndex.
1.3.6.1.4.1.2603.5.2.6.23.7.1.5ColumnalAsymmetricMACread-createcurrentMAC address of remote device. Used to send control traffic to remote device incase transport is MAC based
1.3.6.1.4.1.2603.5.2.6.23.7.1.6ColumnalAsymmetricIPread-createcurrentIP address of remote device. Used to send control traffic to remote device incase transport is IP (L3)based
1.3.6.1.4.1.2603.5.2.6.23.7.1.7ColumnalAsymmetricHealthCheckStatusread-onlycurrentHealth check status: Up = Check enabled and ok; Down = Check enabled and failed; notApplicable = Check disabled
1.3.6.1.4.1.2603.5.2.6.23.7.1.8ColumnalAsymmetricEntryStatusread-createcurrentControl for creating and deleting entries
1.3.6.1.4.1.2603.5.2.6.24NodealServiceActivation
1.3.6.1.4.1.2603.5.2.6.24.1NodealURLFiltering
1.3.6.1.4.1.2603.5.2.6.24.1.1ScalaralUrlFOperationModeread-writecurrentWhether to always operate the service, disable the service or operate the service based on policies.
1.3.6.1.4.1.2603.5.2.6.24.1.2ScalaralUrlFActionread-writecurrentWhether to respond with a warning page, redirect the subscriber to another web site or just report the incident.
1.3.6.1.4.1.2603.5.2.6.24.1.3ScalaralUrlFPortalread-writecurrentWhen the action is redirection, this is the URL to redirect the subscriber to.
1.3.6.1.4.1.2603.5.2.6.24.1.4ScalaralUrlFLastUpdateStatusread-onlycurrentThe error code of the last attempted web safe update. Error codes are: 1 Success 2 General Error 3 Wrong format 4 Binary file corrupted 5 Request Timeout 6 Mis…
1.3.6.1.4.1.2603.5.2.6.24.2NodealURLMonitoring
1.3.6.1.4.1.2603.5.2.6.24.2.1ScalaralUrlMOperatonModeread-writecurrentWhether to always operate the service, disable the service or operate the service based on policies.
1.3.6.1.4.1.2603.5.2.6.24.3NodealCaptivePortal
1.3.6.1.4.1.2603.5.2.6.24.3.1ScalaralCaptivePortalRedirectionTechniqueread-writecurrentCaptivePortal redirection execution technique
1.3.6.1.4.1.2603.5.2.6.24.3.2ScalaralCaptivePortalPassPhraseread-onlycurrentCaptivePortal augmented parameters encryption passphrase
1.3.6.1.4.1.2603.5.2.6.24.4ScalaralVoipReportingActivationread-writecurrentCondition of VOIP reporting feature
1.3.6.1.4.1.2603.5.2.6.24.5ScalaralSPSensorActivationread-writecurrentCondition of SP sensor feature
1.3.6.1.4.1.2603.5.2.6.25ScalaralFupProtocolVersionread-onlycurrentIdentification of FUP protocol version number that is supported by the device
1.3.6.1.4.1.2603.5.2.6.26NodealPredictiveDPI
1.3.6.1.4.1.2603.5.2.6.26.1ScalaralPDPIStateread-writecurrentCondition of Predictive DPI feature
1.3.6.1.4.1.2603.5.2.6.27ScalaralIPv6Stateread-writecurrentState of IPv6 support in NE
1.3.6.1.4.1.2603.5.2.6.28NodealSelectiveBypass
1.3.6.1.4.1.2603.5.2.6.28.1ScalaralSelectiveBypassActivationread-writecurrentActivation of selective bypass function in NE
1.3.6.1.4.1.2603.5.2.6.28.2ScalaralSelectiveBypassVlanGroupread-writecurrentVLAN group catalogue ID to be used for selective bypass
1.3.6.1.4.1.2603.5.2.6.29ScalaralTetherDetectStateread-writecurrentEnables tethering traffic detection in NE
1.3.6.1.4.1.2603.5.2.8ScalaralGenericLastChangeVarread-onlycurrentOID of the variable that was most recently changed
1.3.6.1.4.1.2603.5.2.9ScalaralGenericLastChangeIntValread-onlycurrentMost recently changed integer value (due to previous variable). If value syntax is not INTEGER - the value plased in alGenericLastChangeStr or alGenericLastCha…
1.3.6.1.4.1.2603.5.2.10ScalaralGenericLastChangeTimestampread-onlycurrentTimestamp for the most recent change in Generic branch. Not trap id because of the possibility of overflow of log file.
1.3.6.1.4.1.2603.5.2.11ScalaralGenericConfigTrapEnableread-writecurrentEnables or disables box configuration change traps for generic group: alDeviceConfChangeTrap, alIpAddrConfChangeTrap and alConnRouteConfChangeTrap
1.3.6.1.4.1.2603.5.2.12ScalaralRebootRequestread-writecurrentReboot system.
1.3.6.1.4.1.2603.5.2.13ScalaralGenericLastChangeStrValread-onlycurrentMost recently changed string value (due to variable alGenericLastChangeVar)
1.3.6.1.4.1.2603.5.2.14ScalaralGenericLastChangeAddrValread-onlycurrentMost recently changed ip address value (due to variable alGenericLastChangeVar)
1.3.6.1.4.1.2603.5.3NodealProvisioning
1.3.6.1.4.1.2603.5.3.1NodealCatalogs
1.3.6.1.4.1.2603.5.3.1.1ScalaralCatalogsLastChangeTimestampread-onlycurrentThe timestamp of the most recent change on the catalogs
1.3.6.1.4.1.2603.5.3.1.2ScalaralCatalogsLastChangeRequestread-onlycurrentRequest ID (identifier that came from the management facility) in the most recent change command. Can be used for the syncronization of centrally maintained ca…
1.3.6.1.4.1.2603.5.3.1.3TablealCatalogListTablenot-accessiblecurrentA complete list of all system catalogs
1.3.6.1.4.1.2603.5.3.1.3.1RowalCatalogListEntrynot-accessiblecurrent
1.3.6.1.4.1.2603.5.3.1.3.1.1ColumnalCatalogIdnot-accessiblecurrentCatalog's identifier (number)
1.3.6.1.4.1.2603.5.3.1.3.1.2ColumnalCatalogNameread-onlycurrentCatalog's name
1.3.6.1.4.1.2603.5.3.1.4TablealCatalogsTablenot-accessiblecurrentTable of all catalogs
1.3.6.1.4.1.2603.5.3.1.4.1RowalCatalogsEntrynot-accessiblecurrent
1.3.6.1.4.1.2603.5.3.1.4.1.1ColumnalCatalogInstancenot-accessiblecurrentThis catalog entry ID. Unique inside current catalog.
1.3.6.1.4.1.2603.5.3.1.4.1.2ColumnalCatalogLastCommandread-onlycurrentMost recent change command
1.3.6.1.4.1.2603.5.3.1.4.1.3ColumnalCatalogTimestampread-onlycurrentMost recent update on this instance
1.3.6.1.4.1.2603.5.3.1.4.1.4ColumnalCatalogDataread-onlycurrentData in this catalog entry (XML string).
1.3.6.1.4.1.2603.5.3.1.4.1.5ColumnalCatalogCheckSumread-onlycurrentCheck Sum for the internal test
1.3.6.1.4.1.2603.5.3.1.4.1.6ColumnalCatalogInstanceStatusread-onlycurrentCurrent status of the instance
1.3.6.1.4.1.2603.5.3.1.4.1.7ColumnalCatalogLastChangeOriginread-onlycurrentNumber that uniquely identifies the source of the change (AS generates the corresponding identifier).
1.3.6.1.4.1.2603.5.3.2NodealPolicies
1.3.6.1.4.1.2603.5.3.2.1ScalaralLineLastChangeread-onlycurrentTimestamp of most recent change on the line
1.3.6.1.4.1.2603.5.3.2.2TablealLineTablenot-accessiblecurrentTable of lines
1.3.6.1.4.1.2603.5.3.2.2.1RowalLineEntrynot-accessiblecurrentSpecific line entry.
1.3.6.1.4.1.2603.5.3.2.2.1.1ColumnalLineIdnot-accessiblecurrentLine's ID
1.3.6.1.4.1.2603.5.3.2.2.1.2ColumnalLineLastCommandread-onlycurrentMost recently executed command
1.3.6.1.4.1.2603.5.3.2.2.1.3ColumnalLineTimestampread-onlycurrentTimestamp for the most recent change
1.3.6.1.4.1.2603.5.3.2.2.1.4ColumnalLineDataread-onlycurrentXML data of this rule
1.3.6.1.4.1.2603.5.3.2.2.1.5ColumnalLineCheckSumread-onlycurrentChecksum to be calculated on line's XML string for the testing purposes.
1.3.6.1.4.1.2603.5.3.2.2.1.6ColumnalLineInstanceStatusread-onlycurrentCurrent status of the line.
1.3.6.1.4.1.2603.5.3.2.2.1.7ColumnalLineLastChangeOriginread-onlycurrentNumber that uniquely identifies the change originator
1.3.6.1.4.1.2603.5.3.2.3ScalaralPipeLastChangeread-onlycurrentMost recent configuration change timestamp on one of pipes
1.3.6.1.4.1.2603.5.3.2.4TablealPipeTablenot-accessiblecurrentPipe configuration table
1.3.6.1.4.1.2603.5.3.2.4.1RowalPipeEntrynot-accessiblecurrentEntry for the specific pipe
1.3.6.1.4.1.2603.5.3.2.4.1.1ColumnalPipeIdnot-accessiblecurrent
1.3.6.1.4.1.2603.5.3.2.4.1.2ColumnalPipeLastCommandread-onlycurrent
1.3.6.1.4.1.2603.5.3.2.4.1.3ColumnalPipeTimestampread-onlycurrent
1.3.6.1.4.1.2603.5.3.2.4.1.4ColumnalPipeDataread-onlycurrent
1.3.6.1.4.1.2603.5.3.2.4.1.5ColumnalPipeCheckSumread-onlycurrent
1.3.6.1.4.1.2603.5.3.2.4.1.6ColumnalPipeIsTemplateread-onlycurrentIdentifies whether the current pipe is a template one.
1.3.6.1.4.1.2603.5.3.2.4.1.7ColumnalPipeStatusread-onlycurrent
1.3.6.1.4.1.2603.5.3.2.4.1.8ColumnalPipeLastChangeOriginread-onlycurrentNumber that uniquely identifies the change source
1.3.6.1.4.1.2603.5.3.2.5ScalaralVCLastChangeread-onlycurrentThe most recent configuration change timestamp on one of VCs
1.3.6.1.4.1.2603.5.3.2.6TablealVCTablenot-accessiblecurrentTable of VC configurations
1.3.6.1.4.1.2603.5.3.2.6.1RowalVCEntrynot-accessiblecurrentA specific entry for VC
1.3.6.1.4.1.2603.5.3.2.6.1.1ColumnalVCIdnot-accessiblecurrent
1.3.6.1.4.1.2603.5.3.2.6.1.2ColumnalVCLastCommandread-onlycurrent
1.3.6.1.4.1.2603.5.3.2.6.1.3ColumnalVCTimestampread-onlycurrent
1.3.6.1.4.1.2603.5.3.2.6.1.4ColumnalVCDataread-onlycurrent
1.3.6.1.4.1.2603.5.3.2.6.1.5ColumnalVCCheckSumread-onlycurrent
1.3.6.1.4.1.2603.5.3.2.6.1.6ColumnalVCIsTemplateread-onlycurrentIdentifies whether current VC is a template one.
1.3.6.1.4.1.2603.5.3.2.6.1.7ColumnalVCStatusread-onlycurrent
1.3.6.1.4.1.2603.5.3.2.6.1.8ColumnalVCLastChangeOriginread-onlycurrentNumber that uniquely identifies the last change command originator
1.3.6.1.4.1.2603.5.3.2.7ScalaralLineConfTrapEnableread-writecurrentActivates/deactivated line policy configuration change traps
1.3.6.1.4.1.2603.5.3.2.8ScalaralPipeConfTrapEnableread-writecurrentActivates/deactivated Pipe policy configuration change traps
1.3.6.1.4.1.2603.5.3.2.9ScalaralVcConfTrapEnableread-writecurrentActivates/deactivated VC policy configuration change traps
1.3.6.1.4.1.2603.5.3.2.10ScalaralPolicyModificationTagread-onlycurrentThe variable reflects the synchronization status of current policy/catalogs.
1.3.6.1.4.1.2603.5.4NodealStatistics
1.3.6.1.4.1.2603.5.4.1TablealStatCntlTablenot-accessiblecurrentControl table of statistics
1.3.6.1.4.1.2603.5.4.1.1RowalStatCntlEntrynot-accessiblecurrentStatistics control entry
1.3.6.1.4.1.2603.5.4.1.1.1ColumnalStatCntlLinenot-accessiblecurrentLine number
1.3.6.1.4.1.2603.5.4.1.1.2ColumnalStatCntlPipenot-accessiblecurrentPipe number inside line
1.3.6.1.4.1.2603.5.4.1.1.3ColumnalStatCntlVCnot-accessiblecurrentVC number inside pipe
1.3.6.1.4.1.2603.5.4.1.1.4ColumnalStatCntlUserInstancenot-accessiblecurrentSome identification of the user. May be host name, modem ID, ip or mac address, vlan, etc. When not relevant (not a template rule) - zero length string.
1.3.6.1.4.1.2603.5.4.1.1.5ColumnalStatCntlIsTemplateread-createcurrentIn case the statistics collection must be provided per each instance of template rule - (2). Otherwise (no template or specific instance) - (1)
1.3.6.1.4.1.2603.5.4.1.1.6ColumnalStatCntlStartedAtread-onlycurrentCollection of counters started at this date-time
1.3.6.1.4.1.2603.5.4.1.1.7ColumnalStatCntlIsViewread-createcurrentThe current entry was created and used for viewing of the statistics counters.
1.3.6.1.4.1.2603.5.4.1.1.8ColumnalStatCntlIsAlertread-createcurrentThe current entry was created and used for the alert functioning.
1.3.6.1.4.1.2603.5.4.1.1.9ColumnalStatCntlStatusread-createcurrentIs used to provide create/remove of entries
1.3.6.1.4.1.2603.5.4.2TablealStatTablenot-accessiblecurrentStatistics table (per rules)
1.3.6.1.4.1.2603.5.4.2.1RowalStatEntrynot-accessiblecurrentStatistics entry (for the specific rule).
1.3.6.1.4.1.2603.5.4.2.1.5ColumnalStatLiveConnread-onlycurrentNumber of live connections
1.3.6.1.4.1.2603.5.4.2.1.6ColumnalStatNewConnread-onlycurrentNumber of new connections
1.3.6.1.4.1.2603.5.4.2.1.7ColumnalStatDropConnread-onlycurrentNumber of dropped connections
1.3.6.1.4.1.2603.5.4.2.1.8ColumnalStatOctetsInread-onlycurrentAverage inbound rate (in 1024 bytes per second) during measurement interval
1.3.6.1.4.1.2603.5.4.2.1.9ColumnalStatOctetsOutread-onlycurrentAverage outbound rate (in 1024 bytes per second) during measurement interval
1.3.6.1.4.1.2603.5.4.2.1.10ColumnalStatOctetsTotalread-onlycurrentAverage total (inbound+outbound) inbound rate (in 1024 bytes per second) during measurement interval
1.3.6.1.4.1.2603.5.4.2.1.11ColumnalStatPacketsInread-onlycurrentAverage inbound rate (in packets per second) during measurement interval
1.3.6.1.4.1.2603.5.4.2.1.12ColumnalStatPacketsOutread-onlycurrentAverage outbound rate (in packets per second) during measurement interval
1.3.6.1.4.1.2603.5.4.2.1.13ColumnalStatPacketsTotalread-onlycurrentAverage total (inbound+outbound) rate (in packets per second) during measurement interval
1.3.6.1.4.1.2603.5.4.3ScalaralStatPipesread-onlycurrentThe total number of pipes in the system (including template instances)
1.3.6.1.4.1.2603.5.4.4ScalaralStatVCsread-onlycurrentTotal number of VCs in the system (including template instances)
1.3.6.1.4.1.2603.5.4.5ScalaralStatLinesread-onlycurrentThe total number of active lines
1.3.6.1.4.1.2603.5.4.6ScalaralNumberEstConnectionsread-onlycurrentNumber of established connections
1.3.6.1.4.1.2603.5.4.7ScalaralConnectionEstRateread-onlycurrentConnection establishment rate
1.3.6.1.4.1.2603.5.4.8ScalaralActiveSubscribersread-onlycurrentThe number of subscribes when interfaced with SMP
1.3.6.1.4.1.2603.5.5NodealAlerts
1.3.6.1.4.1.2603.5.5.1TablealDataSourceTablenot-accessiblecurrentThe list of data sources to be periodically checked
1.3.6.1.4.1.2603.5.5.1.1RowalDataSourceEntrynot-accessiblecurrentSingle data source server
1.3.6.1.4.1.2603.5.5.1.1.1ColumnalDataSourceTypenot-accessiblecurrentData source server description
1.3.6.1.4.1.2603.5.5.1.1.2ColumnalDataSourcePriorityOrdernot-accessiblecurrentPriority of source of this type
1.3.6.1.4.1.2603.5.5.1.1.3ColumnalDataSourceIPAddrread-createcurrentIP address of the corresponding server
1.3.6.1.4.1.2603.5.5.1.1.4ColumnalDataSourceDescrread-createcurrentData source description (free text).
1.3.6.1.4.1.2603.5.5.1.1.5ColumnalDataSourceStatusread-onlycurrentCurrent status of the server.
1.3.6.1.4.1.2603.5.5.1.1.6ColumnalDataSourceRowStatusread-createcurrentThe object for the management of data sources (creation, deletion)
1.3.6.1.4.1.2603.5.5.2ScalaralDataSourceLastChangeread-onlycurrentThe timestamp of last change on datasource table (add/delete/status change)
1.3.6.1.4.1.2603.5.5.3ScalaralSevereSoftwareProblemread-onlycurrentSoftware problem is to be occurred. The action will be taken
1.3.6.1.4.1.2603.5.5.4ScalaralMemoryUsageread-onlycurrentDevice RAM usage in %
1.3.6.1.4.1.2603.5.5.5ScalaralDiskUsageread-onlycurrentDevice HD (or flash disk) usage level in %
1.3.6.1.4.1.2603.5.5.6ScalaralTemperatureread-onlycurrentThe temperature gauge measurement in degrees centigrade
1.3.6.1.4.1.2603.5.5.7TablealAlertConfTablenot-accessiblecurrentConfiguration table for the alerts
1.3.6.1.4.1.2603.5.5.7.1RowalAlertConfEntrynot-accessiblecurrentAlert configuration entry.
1.3.6.1.4.1.2603.5.5.7.1.1ColumnalAlertConfIdnot-accessiblecurrentThe identifier of alert definitions. All alerts with same alAlertConfId have same columns values except alAlertConfVariable and alAlertConfValue.
1.3.6.1.4.1.2603.5.5.7.1.2ColumnalAlertConfVariableread-onlycurrentPoints to the variable to be tested. Variable contains the object ID in the suffix. Thus it is possible to find out the with object this alarm (alert) is assoc…
1.3.6.1.4.1.2603.5.5.7.1.3ColumnalAlertConfValueread-onlycurrentThe current value of the observed variable. Must be integer!
1.3.6.1.4.1.2603.5.5.7.1.4ColumnalAlertConfThresholdread-onlycurrentThreshold value - when crossed upwards - the corresponding event must be issued
1.3.6.1.4.1.2603.5.5.7.1.5ColumnalAlertConfNormalread-onlycurrentThe normal value of the variable - when crossed downwards - the event is deactivated
1.3.6.1.4.1.2603.5.5.7.1.6ColumnalAlertConfRegIntervalread-onlycurrentThe counter inside the sample that provides the event should be more then this % of time in the area defined by variable - alAlertConfThreshold.
1.3.6.1.4.1.2603.5.5.7.1.7ColumnalAlertConfUnRegIntervalread-onlycurrentThe counter inside the sample that provides the event should be more then this % of time in the area defined defined by variable - alAlertConfNormal.
1.3.6.1.4.1.2603.5.5.7.1.8ColumnalAlertConfThresholdDirectionread-onlycurrentDefines when value crosses the threshold: if val > or = or < or != threshold
1.3.6.1.4.1.2603.5.5.8ScalaralAlertLastChangeread-onlycurrentShows when the most recent alert occured. Covers the alerts from the alert table, memory, disk and temperature alerts. Not including data source alarms
1.3.6.1.4.1.2603.5.5.9ScalaralLastAccessViolationread-onlycurrentMost recent access violation timestamp
1.3.6.1.4.1.2603.5.5.10ScalaralAlertsTrapsEnableread-writecurrentEnables/disables all alerts traps (including system alerts)
1.3.6.1.4.1.2603.5.5.11ScalaralDataSourceTrapEnableread-writecurrentEnable/disable data source traps
1.3.6.1.4.1.2603.5.5.12ScalaralAccessViolationTrapEnableread-writecurrentEnable/Disable access violation trap
1.3.6.1.4.1.2603.5.5.13TableallDOSAttackTablenot-accessiblecurrentList of current DOS attacks detected on interfaces.
1.3.6.1.4.1.2603.5.5.13.1RowallDOSAttackEntrynot-accessiblecurrent
1.3.6.1.4.1.2603.5.5.13.1.1ColumnalDOSAttackTypenot-accessiblecurrentType of DOS attack
1.3.6.1.4.1.2603.5.5.13.1.2ColumnalDOSAttackPortread-onlycurrentPort that under DOS attack
1.3.6.1.4.1.2603.5.5.13.1.3ColumnalDOSAttackStatusread-onlycurrentCurrent status of DOS attack: 1- DOS attack active 2- DOS attack is finished
1.3.6.1.4.1.2603.5.5.14ScalaralDOSTrapEnableread-writecurrentEnable/Disable DOS attacks traps
1.3.6.1.4.1.2603.5.5.15ScalaralCpuUsageread-onlycurrentDevice average CPUs usage in %
1.3.6.1.4.1.2603.5.5.16ScalaralLastMessageread-onlycurrentMessage that describes last ALLOT system event
1.3.6.1.4.1.2603.5.5.17ScalaralCpuPicoUsageread-onlycurrentAverage CPU load of Pico processors
1.3.6.1.4.1.2603.5.5.18TablealSensorTablenot-accessiblecurrent
1.3.6.1.4.1.2603.5.5.18.1RowalSensorEntrynot-accessiblecurrent
1.3.6.1.4.1.2603.5.5.18.1.1ColumnalSensorIdnot-accessiblecurrent
1.3.6.1.4.1.2603.5.5.18.1.2ColumnalSensorTyperead-onlycurrentRepresents type of sensor. Possible types are: temperature(1), fan(2), powerSupply(3), cpu(4), memory(5), storage(6), voltage(7), telco(8) , picoCpu(9), cer(10…
1.3.6.1.4.1.2603.5.5.18.1.3ColumnalSensorRawValueread-onlycurrentRaw value of sensor (cpu load for CPU; memory usage for memory etc)
1.3.6.1.4.1.2603.5.6NodealLoadConfig
1.3.6.1.4.1.2603.5.6.1ScalaralSaveConfigread-writecurrentContains the name of most recent backup file or empty string. The file is located in a well-known folder. The set operation launches the save command which bui…
1.3.6.1.4.1.2603.5.6.2ScalaralRestoreConfigread-writecurrentName of archive file that contains the device configuration. The get operation returns an empty string. Change of this node (set operation) causes the reconfig…
1.3.6.1.4.1.2603.5.6.3TablealPoliciesStatusTablenot-accessiblecurrentShows the list of policies on the device. Can be used for activation/deactivation of the policy.
1.3.6.1.4.1.2603.5.6.3.1RowalPoliciesStatusEntrynot-accessiblecurrent
1.3.6.1.4.1.2603.5.6.3.1.1ColumnalPolicyNameread-onlycurrentName of the policy
1.3.6.1.4.1.2603.5.6.3.1.2ColumnalPolicyTimestampread-onlycurrentTime when the last change happened.
1.3.6.1.4.1.2603.5.6.3.1.3ColumnalPolicyStatusread-writecurrentactive - this policy (entry) is now 'active'; nonActive - now is not in use; doMakeActive - setting of this value launches the switchover operation to make thi…
1.3.6.1.4.1.2603.6NodealConf
1.3.6.1.4.1.2603.6.1NodealGroups
1.3.6.1.4.1.2603.6.1.1GroupalGenericGroupcurrentGroup of generic objects
1.3.6.1.4.1.2603.6.1.2GroupalProvisioningGroupcurrentObject related to the provisioning
1.3.6.1.4.1.2603.6.1.3GroupalStatisticsGroupcurrentStatistics objects
1.3.6.1.4.1.2603.6.1.4GroupalAlertsGroupcurrentAlerts related objects
1.3.6.1.4.1.2603.6.1.5GroupalLoadGroupcurrentVariable related to save/restore operations
1.3.6.1.4.1.2603.6.1.6GroupalEventsGroupcurrentAll notifications.
1.3.6.1.4.1.2603.6.2NodealCompls
1.3.6.1.4.1.2603.6.2.1CompliancealCompliancecurrentThe compliance statement for SNMP entities which implement this MIB
Type Definitions
NameSyntaxStatusDescription
AlActiveStandbyStatusINTEGER { bypass(1), nonBypass(2), standBy(3), partialBypass(4), notApplicable(0) }currentRepresents software status: (0)- notApplicable (1)-bypass (2)-nonBypass-active (3)-standBy (4)-partialBypass
AlConfigCommandINTEGER { create(1), update(2), delete(3) }currentConfiguration change operations
AlEnableDisableINTEGER { enabled(1), disabled(2) }currentEnable/disable variable.
AlEnableDisableNAINTEGER { enabled(1), disabled(2), notAplicable(3) }currentEnable/Disable/NA values
AlInstanceStatusINTEGER { active(1), disabled(2), removed(3) }currentStatus of policy element entry.
AlUrlOperationModeINTEGER { always(1), policybased(2), disable(3) }current
MIB Viewer