MIB Viewer

ALTEON-CS-PHYSICAL-MIB

289 objects
The MIB module for the Alteon OS Layer2 configuration, statistics and information .
Imported Objects
ALTEON-ROOT-MIBaws-switch
SNMPv2-SMICounter32 Gauge32 Integer32 MODULE-IDENTITY OBJECT-TYPE TimeTicks
SNMPv2-TCDisplayString PhysAddress
OIDNameAccessStatusDescription
1.3.6.1.4.1.1872.2.5.2Identitylayer2The MIB module for the Alteon OS Layer2 configuration, statistics and information .
1.3.6.1.4.1.1872.2.5.2.1Nodelayer2Configs
1.3.6.1.4.1.1872.2.5.2.1.1Nodevlan
1.3.6.1.4.1.1872.2.5.2.1.1.1ScalarvlanMaxEntread-onlycurrentThe maximum number of rows in the VLAN configuration table.
1.3.6.1.4.1.1872.2.5.2.1.1.2TablevlanCurCfgTablenot-accessiblecurrentThe table of VLAN configuration.
1.3.6.1.4.1.1872.2.5.2.1.1.2.1RowvlanCurCfgTableEntrynot-accessiblecurrentA row in the VLAN configuration table.
1.3.6.1.4.1.1872.2.5.2.1.1.2.1.1ColumnvlanCurCfgVlanIdread-onlycurrentThe VLAN identifier.
1.3.6.1.4.1.1872.2.5.2.1.1.2.1.2ColumnvlanCurCfgVlanNameread-onlycurrentThe VLAN name.
1.3.6.1.4.1.1872.2.5.2.1.1.2.1.3ColumnvlanCurCfgPortsread-onlycurrentThe port list in the VLAN. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || ||…
1.3.6.1.4.1.1872.2.5.2.1.1.2.1.4ColumnvlanCurCfgStateread-onlycurrentEnable or disable a VLAN
1.3.6.1.4.1.1872.2.5.2.1.1.2.1.5ColumnvlanCurCfgBwmContractread-onlycurrentDefault contract number the VLAN
1.3.6.1.4.1.1872.2.5.2.1.1.2.1.6ColumnvlanCurCfgStgread-onlycurrentThe Spanning Tree Group for the VLAN.
1.3.6.1.4.1.1872.2.5.2.1.1.2.1.7ColumnvlanCurCfgJumboread-onlycurrentEnable or disable Jumbo frames on a VLAN
1.3.6.1.4.1.1872.2.5.2.1.1.2.1.8ColumnvlanCurCfgLearnread-onlycurrentEnable or disable source MAC address learning on a VLAN
1.3.6.1.4.1.1872.2.5.2.1.1.3TablevlanNewCfgTablenot-accessiblecurrentThe table of VLAN configuration.
1.3.6.1.4.1.1872.2.5.2.1.1.3.1RowvlanNewCfgTableEntrynot-accessiblecurrentA row in the VLAN configuration table.
1.3.6.1.4.1.1872.2.5.2.1.1.3.1.1ColumnvlanNewCfgVlanIdread-onlycurrentThe VLAN identifier.
1.3.6.1.4.1.1872.2.5.2.1.1.3.1.2ColumnvlanNewCfgVlanNameread-createcurrentThe VLAN name.
1.3.6.1.4.1.1872.2.5.2.1.1.3.1.3ColumnvlanNewCfgPortsread-onlycurrentThe port list in the VLAN. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 || || ||…
1.3.6.1.4.1.1872.2.5.2.1.1.3.1.4ColumnvlanNewCfgStateread-createcurrentEnable or disable a VLAN
1.3.6.1.4.1.1872.2.5.2.1.1.3.1.5ColumnvlanNewCfgAddPortread-createcurrentThe port to be added to the specified VLAN. A '0' value is returned when read.
1.3.6.1.4.1.1872.2.5.2.1.1.3.1.6ColumnvlanNewCfgRemovePortread-createcurrentThe port to be removed from the specified VLAN. A '0' value is returned when read.
1.3.6.1.4.1.1872.2.5.2.1.1.3.1.7ColumnvlanNewCfgDeleteread-createcurrentThis is an action object to create or delete a VLAN. other(1) is returned always when read. The following values are writable: delete(2)...to delete a VLAN
1.3.6.1.4.1.1872.2.5.2.1.1.3.1.8ColumnvlanNewCfgBwmContractread-createcurrentDefault contract number for the VLAN.
1.3.6.1.4.1.1872.2.5.2.1.1.3.1.9ColumnvlanNewCfgStgread-createcurrentThe Spanning Tree Group for the VLAN.
1.3.6.1.4.1.1872.2.5.2.1.1.3.1.10ColumnvlanNewCfgJumboread-createcurrentEnable or disable Jumbo frames on a VLAN
1.3.6.1.4.1.1872.2.5.2.1.1.3.1.11ColumnvlanNewCfgLearnread-createcurrentEnable or disable source mac address learning on a VLAN
1.3.6.1.4.1.1872.2.5.2.1.1.4ScalarvlanMaxVlanIDread-onlycurrentThe maximum allowed VLAN ID.
1.3.6.1.4.1.1872.2.5.2.1.2Nodetrunkgroup
1.3.6.1.4.1.1872.2.5.2.1.2.1ScalartrunkGroupTableMaxSizeread-onlycurrentThe maximum number of entries in trunk group table.
1.3.6.1.4.1.1872.2.5.2.1.2.2TabletrunkGroupCurCfgTablenot-accessiblecurrentThe table of trunk group configuration.
1.3.6.1.4.1.1872.2.5.2.1.2.2.1RowtrunkGroupCurCfgTableEntrynot-accessiblecurrentA row in the trunk group configuration table.
1.3.6.1.4.1.1872.2.5.2.1.2.2.1.1ColumntrunkGroupCurCfgIndexread-onlycurrentThe identifier of the trunk group.
1.3.6.1.4.1.1872.2.5.2.1.2.2.1.2ColumntrunkGroupCurCfgPortsread-onlycurrentThe port list in the trunk group. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 |…
1.3.6.1.4.1.1872.2.5.2.1.2.2.1.3ColumntrunkGroupCurCfgStateread-onlycurrentEnable or disable a trunk group.
1.3.6.1.4.1.1872.2.5.2.1.2.2.1.4ColumntrunkGroupCurCfgBwmContractread-onlycurrentDefault BW contract of a trunk group.
1.3.6.1.4.1.1872.2.5.2.1.2.3TabletrunkGroupNewCfgTablenot-accessiblecurrentThe table of trunk group configuration.
1.3.6.1.4.1.1872.2.5.2.1.2.3.1RowtrunkGroupNewCfgTableEntrynot-accessiblecurrentA row in the trunk group configuration table.
1.3.6.1.4.1.1872.2.5.2.1.2.3.1.1ColumntrunkGroupNewCfgIndexread-onlycurrentThe identifier of the trunk group.
1.3.6.1.4.1.1872.2.5.2.1.2.3.1.2ColumntrunkGroupNewCfgPortsread-onlycurrentThe port list in the trunk group. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ port 8 |…
1.3.6.1.4.1.1872.2.5.2.1.2.3.1.3ColumntrunkGroupNewCfgAddPortread-createcurrentThe port to be added in the trunk group. When read, 0 is returned.
1.3.6.1.4.1.1872.2.5.2.1.2.3.1.4ColumntrunkGroupNewCfgRemovePortread-createcurrentThe port to be deleted from the trunk group. when read, 0 is returned.
1.3.6.1.4.1.1872.2.5.2.1.2.3.1.5ColumntrunkGroupNewCfgStateread-createcurrentEnable or disable a trunk group.
1.3.6.1.4.1.1872.2.5.2.1.2.3.1.6ColumntrunkGroupNewCfgDeleteread-createcurrentSetting the value to delete(2) will delete the entire row. When read, other(1) is returned.
1.3.6.1.4.1.1872.2.5.2.1.2.3.1.7ColumntrunkGroupNewCfgBwmContractread-createcurrentDefault BW contract of a trunk group.
1.3.6.1.4.1.1872.2.5.2.1.3NodestgCfg
1.3.6.1.4.1.1872.2.5.2.1.3.1TablestgCurCfgTablenot-accessiblecurrentThe table of Spanning Tree Group configuration.
1.3.6.1.4.1.1872.2.5.2.1.3.1.1RowstgCurCfgTableEntrynot-accessiblecurrentInformation about a particular Spanning Tree Group configuration.
1.3.6.1.4.1.1872.2.5.2.1.3.1.1.1ColumnstgCurCfgIndexread-onlycurrentThe identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.
1.3.6.1.4.1.1872.2.5.2.1.3.1.1.2ColumnstgCurCfgStateread-onlycurrentTurn on of off Spanning Tree operation of a particular Spanning Tree Group.
1.3.6.1.4.1.1872.2.5.2.1.3.1.1.5ColumnstgCurCfgPriorityread-onlycurrentThe value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID.
1.3.6.1.4.1.1872.2.5.2.1.3.1.1.6ColumnstgCurCfgBrgHelloTimeread-onlycurrentThe value in seconds that all bridges use for HelloTime when this bridge is acting as the root.
1.3.6.1.4.1.1872.2.5.2.1.3.1.1.7ColumnstgCurCfgBrgForwardDelayread-onlycurrentThe value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root.
1.3.6.1.4.1.1872.2.5.2.1.3.1.1.8ColumnstgCurCfgBrgMaxAgeread-onlycurrentThe value in seconds that all bridges use for MaxAge when this bridge is acting as the root.
1.3.6.1.4.1.1872.2.5.2.1.3.1.1.9ColumnstgCurCfgAgingTimeread-onlycurrentThe timeout period in seconds for aging out dynamically learned forwarding information.
1.3.6.1.4.1.1872.2.5.2.1.3.1.1.10ColumnstgCurCfgVlanBmapread-onlycurrentThe vlans applied to the spanning tree group. The vlans are presented in bitmap format. This string displays vlan number from 1 to 4096. in receiving order: OC…
1.3.6.1.4.1.1872.2.5.2.1.3.2TablestgNewCfgTablenot-accessiblecurrentThe table of Spanning Tree Groups configuration in the new_config.
1.3.6.1.4.1.1872.2.5.2.1.3.2.1RowstgNewCfgTableEntrynot-accessiblecurrentInformation about a particular Spanning Tree Group configuration.
1.3.6.1.4.1.1872.2.5.2.1.3.2.1.1ColumnstgNewCfgIndexread-onlycurrentThe identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.
1.3.6.1.4.1.1872.2.5.2.1.3.2.1.2ColumnstgNewCfgStateread-writecurrentTurn on of off Spanning Tree operation of a particular Spanning Tree Group.
1.3.6.1.4.1.1872.2.5.2.1.3.2.1.3ColumnstgNewCfgDefaultCfgread-writecurrentSetting the value to default-config(1) will set the default configuration as recommended by IEEE 802.1D for a particular Spanning Tree Group. default-config (1…
1.3.6.1.4.1.1872.2.5.2.1.3.2.1.4ColumnstgNewCfgAddVlanread-writecurrentThe vlan to be added to the specified Spanning Tree Group. A '0' value is returned when read.
1.3.6.1.4.1.1872.2.5.2.1.3.2.1.5ColumnstgNewCfgRemoveVlanread-writecurrentThe vlan to be removed from the specified Spanning Tree Group. A '0' value is returned when read.
1.3.6.1.4.1.1872.2.5.2.1.3.2.1.8ColumnstgNewCfgPriorityread-writecurrentThe value of the write-able portion of the Bridge ID, i.e., the first two octets of the (8 octet long) Bridge ID.
1.3.6.1.4.1.1872.2.5.2.1.3.2.1.9ColumnstgNewCfgBrgHelloTimeread-writecurrentThe value in seconds that all bridges use for HelloTime when this bridge is acting as the root.
1.3.6.1.4.1.1872.2.5.2.1.3.2.1.10ColumnstgNewCfgBrgForwardDelayread-writecurrentThe value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root.
1.3.6.1.4.1.1872.2.5.2.1.3.2.1.11ColumnstgNewCfgBrgMaxAgeread-writecurrentThe value in seconds that all bridges use for MaxAge when this bridge is acting as the root.
1.3.6.1.4.1.1872.2.5.2.1.3.2.1.12ColumnstgNewCfgAgingTimeread-writecurrentThe timeout period in seconds for aging out dynamically learned forwarding information.
1.3.6.1.4.1.1872.2.5.2.1.3.2.1.13ColumnstgNewCfgVlanBmapread-onlycurrentThe vlans applied to the spanning tree group. The vlans are presented in bitmap format. This string displays vlan number from 1 to 4096. in receiving order: OC…
1.3.6.1.4.1.1872.2.5.2.1.3.3TablestgCurCfgPortTablenot-accessiblecurrentThe table of Spanning Tree Group port configuration in the current_config.
1.3.6.1.4.1.1872.2.5.2.1.3.3.1RowstgCurCfgPortTableEntrynot-accessiblecurrentInformation about port configuration of a particular Spanning Tree Group.
1.3.6.1.4.1.1872.2.5.2.1.3.3.1.1ColumnstgCurCfgStgIndexread-onlycurrentThe identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.
1.3.6.1.4.1.1872.2.5.2.1.3.3.1.2ColumnstgCurCfgPortIndexread-onlycurrentThe port identifier of a particular Spanning Tree Group.
1.3.6.1.4.1.1872.2.5.2.1.3.3.1.3ColumnstgCurCfgPortStateread-onlycurrentTurn on of off Spanning Tree operation of a particular port of a Spanning Tree Group.
1.3.6.1.4.1.1872.2.5.2.1.3.3.1.4ColumnstgCurCfgPortPriorityread-onlycurrentThe value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID.
1.3.6.1.4.1.1872.2.5.2.1.3.3.1.5ColumnstgCurCfgPortPathCostread-onlycurrentThe contribution of this port to the path cost of paths towards the spanning tree root which include this port (if MSTP/RSTP is enabled range is (0..200000000)…
1.3.6.1.4.1.1872.2.5.2.1.3.3.1.6ColumnstgCurCfgPortLinkread-onlycurrentThe type of the port link.
1.3.6.1.4.1.1872.2.5.2.1.3.3.1.7ColumnstgCurCfgPortEdgeread-onlycurrentThe state of port edge.
1.3.6.1.4.1.1872.2.5.2.1.3.4TablestgNewCfgPortTablenot-accessiblecurrentThe table of Spanning Tree Group port configuration in the new_config.
1.3.6.1.4.1.1872.2.5.2.1.3.4.1RowstgNewCfgPortTableEntrynot-accessiblecurrentInformation about port configuration of a particular Spanning Tree Group.
1.3.6.1.4.1.1872.2.5.2.1.3.4.1.1ColumnstgNewCfgStgIndexread-onlycurrentThe identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.
1.3.6.1.4.1.1872.2.5.2.1.3.4.1.2ColumnstgNewCfgPortIndexread-onlycurrentThe port identifier of a particular Spanning Tree Group.
1.3.6.1.4.1.1872.2.5.2.1.3.4.1.3ColumnstgNewCfgPortStateread-createcurrentTurn on of off Spanning Tree operation of a particular port of a Spanning Tree Group.
1.3.6.1.4.1.1872.2.5.2.1.3.4.1.4ColumnstgNewCfgPortPriorityread-createcurrentThe value of the priority field which is contained in the first (in network byte order) octet of the (2 octet long) Port ID.
1.3.6.1.4.1.1872.2.5.2.1.3.4.1.5ColumnstgNewCfgPortPathCostread-createcurrentThe contribution of this port to the path cost of paths towards the spanning tree root which include this port (if MSTP/RSTP is enabled range is (0..200000000)…
1.3.6.1.4.1.1872.2.5.2.1.3.4.1.6ColumnstgNewCfgPortLinkread-createcurrentThe type of the port link.
1.3.6.1.4.1.1872.2.5.2.1.3.4.1.7ColumnstgNewCfgPortEdgeread-createcurrentThe state of port edge.
1.3.6.1.4.1.1872.2.5.2.1.4Nodemirroring
1.3.6.1.4.1.1872.2.5.2.1.4.1NodemirrPortMirr
1.3.6.1.4.1.1872.2.5.2.1.4.1.1ScalarpmCurCfgPortMirrStateread-onlycurrentThe state of port-based port mirroring.
1.3.6.1.4.1.1872.2.5.2.1.4.1.2ScalarpmNewCfgPortMirrStateread-writecurrentThe state of port-based port mirroring.
1.3.6.1.4.1.1872.2.5.2.1.4.1.3TablepmCurCfgPortMonitorTablenot-accessiblecurrentThe table of monitoring ports.
1.3.6.1.4.1.1872.2.5.2.1.4.1.3.1RowpmCurCfgPortMonitorEntrynot-accessiblecurrentA row in the monitoring port table.
1.3.6.1.4.1.1872.2.5.2.1.4.1.3.1.1ColumnpmCurCfgPmirrMoniPortIndexread-onlycurrentThe monitoring port number.
1.3.6.1.4.1.1872.2.5.2.1.4.1.3.1.2ColumnpmCurCfgPmirrMirrPortIndexread-onlycurrentThe mirrored port number
1.3.6.1.4.1.1872.2.5.2.1.4.1.3.1.3ColumnpmCurCfgPmirrDirectionread-onlycurrentThe type of traffic to be monitored with respect to the mirrored port.
1.3.6.1.4.1.1872.2.5.2.1.4.1.3.1.6ColumnpmCurCfgPmirrPortVlansBmapread-onlycurrentThe mirrored VLANs (1-4096) list for the port. The VLANs are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || |…
1.3.6.1.4.1.1872.2.5.2.1.4.1.4TablepmNewCfgPortMonitorTablenot-accessiblecurrentThe table of monitoring ports.
1.3.6.1.4.1.1872.2.5.2.1.4.1.4.1RowpmNewCfgPortMonitorEntrynot-accessiblecurrentA row in the monitoring port table.
1.3.6.1.4.1.1872.2.5.2.1.4.1.4.1.1ColumnpmNewCfgPmirrMoniPortIndexread-onlycurrentThe monitoring port number.
1.3.6.1.4.1.1872.2.5.2.1.4.1.4.1.2ColumnpmNewCfgPmirrMirrPortIndexread-onlycurrentThe mirrored port number
1.3.6.1.4.1.1872.2.5.2.1.4.1.4.1.3ColumnpmNewCfgPmirrDirectionread-createcurrentThe type of traffic to be monitored with respect to the mirrored port.
1.3.6.1.4.1.1872.2.5.2.1.4.1.4.1.4ColumnpmNewCfgPmirrDeleteread-createcurrentSetting the value to delete(2) will delete the entire row. When read, other(1) is returned.
1.3.6.1.4.1.1872.2.5.2.1.4.1.4.1.7ColumnpmNewCfgAddVlanread-createcurrentThe VLAN whose traffic is to be mirrored for this port. A '0' value is returned when read.
1.3.6.1.4.1.1872.2.5.2.1.4.1.4.1.8ColumnpmNewCfgRemoveVlanread-createcurrentThe VLAN whose traffic will no longer to be mirrored. A '0' value is returned when read.
1.3.6.1.4.1.1872.2.5.2.1.4.1.4.1.9ColumnpmNewCfgPmirrPortVlansBmapread-onlycurrentThe mirrored VLANs(1-4096) list for the port. The VLANs are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || ||…
1.3.6.1.4.1.1872.2.5.2.1.5Nodelacp
1.3.6.1.4.1.1872.2.5.2.1.5.1ScalarlacpCurSystemPriorityread-onlycurrentA 2-octet read-write value indicating the priority value associated with the Actor's System ID.
1.3.6.1.4.1.1872.2.5.2.1.5.2ScalarlacpNewSystemPriorityread-writecurrentA 2-octet read-write value indicating the priority value associated with the Actor's System ID.
1.3.6.1.4.1.1872.2.5.2.1.5.5ScalarlacpCurSystemTimeoutTimeread-onlycurrentIf a port does not receive LACPDUs for Timeout time LACP information pertaining to the port is invalidated. Its every 3 sec (short) and every 90 sec (long 3).
1.3.6.1.4.1.1872.2.5.2.1.5.6ScalarlacpNewSystemTimeoutTimeread-writecurrentIf a port does not receive LACPDUs for Timeout time LACP information pertaining to the port is invalidated. Its every 3 sec (short) and every 90 sec (long 3).
1.3.6.1.4.1.1872.2.5.2.1.5.7TablelacpCurPortCfgTablenot-accessiblecurrentThe table of LACP port configuration.
1.3.6.1.4.1.1872.2.5.2.1.5.7.1RowlacpCurPortCfgTableEntrynot-accessiblecurrentA row in the LACP port configuration table.
1.3.6.1.4.1.1872.2.5.2.1.5.7.1.1ColumnlacpCurPortCfgTableIdread-onlycurrentLACP port number.
1.3.6.1.4.1.1872.2.5.2.1.5.7.1.2ColumnlacpCurPortStateread-onlycurrentLACP port state can be one of three states off (Not participating in LACP) Active (Initiates LACPDU updates) Passive (Does not initiate LACPDU updates but resp…
1.3.6.1.4.1.1872.2.5.2.1.5.7.1.3ColumnlacpCurPortActorPortPriorityread-onlycurrentThe priority value assigned to this Aggregation Port. This 16-bit value is read-only.
1.3.6.1.4.1.1872.2.5.2.1.5.7.1.4ColumnlacpCurPortActorAdminKeyread-onlycurrentThe current administrative value of the Key for the Aggregation Port. This is a 16-bit read-only value. The meaning of particular Key values is of local signif…
1.3.6.1.4.1.1872.2.5.2.1.5.8TablelacpNewPortCfgTablenot-accessiblecurrentThe table of LACP port configuration.
1.3.6.1.4.1.1872.2.5.2.1.5.8.1RowlacpNewPortCfgTableEntrynot-accessiblecurrentA row in the LACP port configuration table.
1.3.6.1.4.1.1872.2.5.2.1.5.8.1.1ColumnlacpNewPortCfgTableIdread-onlycurrentLACP port number.
1.3.6.1.4.1.1872.2.5.2.1.5.8.1.2ColumnlacpNewPortStateread-writecurrentLACP port state can be one of three states off (Not participating in LACP) Active (Initiates LACPDU updates) Passive (Does not initiate LACPDU updates but resp…
1.3.6.1.4.1.1872.2.5.2.1.5.8.1.3ColumnlacpNewPortActorPortPriorityread-writecurrentThe priority value assigned to this Aggregation Port. This 16-bit value is read-write.
1.3.6.1.4.1.1872.2.5.2.1.5.8.1.4ColumnlacpNewPortActorAdminKeyread-writecurrentThe current administrative value of the Key for the Aggregation Port. This is a 16-bit read-write value. The meaning of particular Key values is of local signi…
1.3.6.1.4.1.1872.2.5.2.1.7NodemstCfg
1.3.6.1.4.1.1872.2.5.2.1.7.1NodemstGeneralCfg
1.3.6.1.4.1.1872.2.5.2.1.7.1.1ScalarmstCurCfgStateread-onlycurrentEnable or disable MSTP/RSTP
1.3.6.1.4.1.1872.2.5.2.1.7.1.2ScalarmstNewCfgStateread-writecurrentEnable or disable MSTP/RSTP
1.3.6.1.4.1.1872.2.5.2.1.7.1.3ScalarmstCurCfgRegionNameread-onlycurrentThe Name for the Region's configuration.
1.3.6.1.4.1.1872.2.5.2.1.7.1.4ScalarmstNewCfgRegionNameread-writecurrentThe Name for the Region's configuration.
1.3.6.1.4.1.1872.2.5.2.1.7.1.5ScalarmstCurCfgRegionVersionread-onlycurrentVersion of the MST Region.
1.3.6.1.4.1.1872.2.5.2.1.7.1.6ScalarmstNewCfgRegionVersionread-writecurrentVersion of the MST Region.
1.3.6.1.4.1.1872.2.5.2.1.7.1.7ScalarmstCurCfgMaxHopCountread-onlycurrentIndicates the maximum hop count value.
1.3.6.1.4.1.1872.2.5.2.1.7.1.8ScalarmstNewCfgMaxHopCountread-writecurrentIndicates the maximum hop count value.
1.3.6.1.4.1.1872.2.5.2.1.7.1.9ScalarmstCurCfgStpModeread-onlycurrentThe version of Spanning Tree Protocal the bridge is currently running.
1.3.6.1.4.1.1872.2.5.2.1.7.1.10ScalarmstNewCfgStpModeread-writecurrentThe version of Spanning Tree Protocal the bridge is currently running.
1.3.6.1.4.1.1872.2.5.2.1.7.2NodemstCistCfg
1.3.6.1.4.1.1872.2.5.2.1.7.2.1ScalarmstCistDefaultCfgread-writecurrentSetting the value to default(1) will set the Multiple Spanning Tree and member parameters to default. default(1) is always returned when read, but it does not …
1.3.6.1.4.1.1872.2.5.2.1.7.2.2NodemstCistBridgeCfg
1.3.6.1.4.1.1872.2.5.2.1.7.2.2.1ScalarmstCistCurCfgBridgePriorityread-onlycurrentThe value of the writable portion of the Brigde Identifier comprising of the first two octets.
1.3.6.1.4.1.1872.2.5.2.1.7.2.2.2ScalarmstCistNewCfgBridgePriorityread-writecurrentThe value of the writable portion of the Brigde Identifier comprising of the first two octets.
1.3.6.1.4.1.1872.2.5.2.1.7.2.2.5ScalarmstCistCurCfgBridgeMaxAgeread-onlycurrentThe value in seconds that all bridges use for MaxAge when this bridge is acting as the root.
1.3.6.1.4.1.1872.2.5.2.1.7.2.2.6ScalarmstCistNewCfgBridgeMaxAgeread-writecurrentThe value in seconds that all bridges use for MaxAge when this bridge is acting as the root.
1.3.6.1.4.1.1872.2.5.2.1.7.2.2.7ScalarmstCistCurCfgBridgeForwardDelayread-onlycurrentThe value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root.
1.3.6.1.4.1.1872.2.5.2.1.7.2.2.8ScalarmstCistNewCfgBridgeForwardDelayread-writecurrentThe value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root.
1.3.6.1.4.1.1872.2.5.2.1.7.2.3TablemstCistCurCfgPortTablenot-accessiblecurrentThe table of CIST Port configuration.
1.3.6.1.4.1.1872.2.5.2.1.7.2.3.1RowmstCistCurCfgPortTableEntrynot-accessiblecurrentInformation about a particular CIST Port configuration.
1.3.6.1.4.1.1872.2.5.2.1.7.2.3.1.1ColumnmstCistCurCfgPortIndexread-onlycurrentThe port number of the port for which this entry contains spanning tree configuration.
1.3.6.1.4.1.1872.2.5.2.1.7.2.3.1.2ColumnmstCistCurCfgPortPriorityread-onlycurrentThe four most significant bits of the Port Identifier of the Spanning Tree instance can be modified by setting this value.
1.3.6.1.4.1.1872.2.5.2.1.7.2.3.1.3ColumnmstCistCurCfgPortPathCostread-onlycurrentThe contribution of this port to the path cost of paths towards the CIST Root which include this port.
1.3.6.1.4.1.1872.2.5.2.1.7.2.3.1.4ColumnmstCistCurCfgPortLinkTyperead-onlycurrentThe administrative point-to-point status of the LAN segment attached to this port. A value of p2p (2) indicates that this port should always be treated as if i…
1.3.6.1.4.1.1872.2.5.2.1.7.2.3.1.5ColumnmstCistCurCfgPortEdgeread-onlycurrentThe value of the Edge Port parameter.
1.3.6.1.4.1.1872.2.5.2.1.7.2.3.1.6ColumnmstCistCurCfgPortStpStateread-onlycurrentTurn port's Spanning Tree on/off.
1.3.6.1.4.1.1872.2.5.2.1.7.2.3.1.7ColumnmstCistCurCfgPortHelloTimeread-onlycurrentThe amount of time between the transmission of Configuration Port PDUs in seconds.
1.3.6.1.4.1.1872.2.5.2.1.7.2.4TablemstCistNewCfgPortTablenot-accessiblecurrentThe table of CIST Port configuration.
1.3.6.1.4.1.1872.2.5.2.1.7.2.4.1RowmstCistNewCfgPortTableEntrynot-accessiblecurrentInformation about a particular CIST Port configuration.
1.3.6.1.4.1.1872.2.5.2.1.7.2.4.1.1ColumnmstCistNewCfgPortIndexread-onlycurrentThe port number of the port for which this entry contains spanning tree configuration.
1.3.6.1.4.1.1872.2.5.2.1.7.2.4.1.2ColumnmstCistNewCfgPortPriorityread-writecurrentThe four most significant bits of the Port Identifier of the Spanning Tree instance can be modified by setting this value.
1.3.6.1.4.1.1872.2.5.2.1.7.2.4.1.3ColumnmstCistNewCfgPortPathCostread-writecurrentThe contribution of this port to the path cost of paths towards the CIST Root which include this port.
1.3.6.1.4.1.1872.2.5.2.1.7.2.4.1.4ColumnmstCistNewCfgPortLinkTyperead-writecurrentThe administrative point-to-point status of the LAN segment attached to this port. A value of p2p (2) indicates that this port should always be treated as if i…
1.3.6.1.4.1.1872.2.5.2.1.7.2.4.1.5ColumnmstCistNewCfgPortEdgeread-writecurrentThe value of the Edge Port parameter.
1.3.6.1.4.1.1872.2.5.2.1.7.2.4.1.6ColumnmstCistNewCfgPortStpStateread-writecurrentTurn port's Spanning Tree on/off.
1.3.6.1.4.1.1872.2.5.2.1.7.2.4.1.7ColumnmstCistNewCfgPortHelloTimeread-writecurrentThe amount of time between the transmission of Configuration Port PDUs in seconds.
1.3.6.1.4.1.1872.2.5.2.1.9NodeportTeamCfg
1.3.6.1.4.1.1872.2.5.2.1.9.1ScalarportTeamTableMaxSizeread-onlycurrentThe maximum number of port teams.
1.3.6.1.4.1.1872.2.5.2.1.9.2TableportTeamCurCfgTablenot-accessiblecurrentThe port team current configuration.
1.3.6.1.4.1.1872.2.5.2.1.9.2.1RowportTeamCurCfgTableEntrynot-accessiblecurrentA row in the port team configuration table.
1.3.6.1.4.1.1872.2.5.2.1.9.2.1.1ColumnportTeamCurCfgIndexread-onlycurrentThe identifier of the port team.
1.3.6.1.4.1.1872.2.5.2.1.9.2.1.2ColumnportTeamCurCfgStateread-onlycurrentEnable or disable a port team.
1.3.6.1.4.1.1872.2.5.2.1.9.2.1.3ColumnportTeamCurCfgPortsread-onlycurrentThe port list in the port team. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | |||_ port 8 | || …
1.3.6.1.4.1.1872.2.5.2.1.9.2.1.4ColumnportTeamCurCfgTrunksread-onlycurrentThe trunk list in the port team. The trunks are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | |||_ trunk 8 | …
1.3.6.1.4.1.1872.2.5.2.1.9.3TableportTeamNewCfgTablenot-accessiblecurrentThe port team new configuration.
1.3.6.1.4.1.1872.2.5.2.1.9.3.1RowportTeamNewCfgTableEntrynot-accessiblecurrentA row in the port team configuration table.
1.3.6.1.4.1.1872.2.5.2.1.9.3.1.1ColumnportTeamNewCfgIndexread-onlycurrentThe identifier of the port team.
1.3.6.1.4.1.1872.2.5.2.1.9.3.1.2ColumnportTeamNewCfgStateread-createcurrentEnable or disable a port team.
1.3.6.1.4.1.1872.2.5.2.1.9.3.1.3ColumnportTeamNewCfgPortsread-onlycurrentThe port list in the port team. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | |||_ port 8 | || …
1.3.6.1.4.1.1872.2.5.2.1.9.3.1.4ColumnportTeamNewCfgAddPortread-createcurrentThe port to be added in the port team. When read, 0 is returned.
1.3.6.1.4.1.1872.2.5.2.1.9.3.1.5ColumnportTeamNewCfgRemovePortread-createcurrentThe port to be deleted from the port team. When read, 0is returned.
1.3.6.1.4.1.1872.2.5.2.1.9.3.1.6ColumnportTeamNewCfgTrunksread-onlycurrentThe trunk list in the port team. The trunks are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | |||_ trunk 8 | …
1.3.6.1.4.1.1872.2.5.2.1.9.3.1.7ColumnportTeamNewCfgAddTrunkread-createcurrentThe trunk to be added in the port team. When read, 0 is returned.
1.3.6.1.4.1.1872.2.5.2.1.9.3.1.8ColumnportTeamNewCfgRemoveTrunkread-createcurrentThe trunk to be deleted from the port team. When read, 0is returned.
1.3.6.1.4.1.1872.2.5.2.1.9.3.1.9ColumnportTeamNewCfgDeleteread-createcurrentSetting the value to delete(2) will delete the entire row. When read, other(1) is returned.
1.3.6.1.4.1.1872.2.5.2.2Nodelayer2Stats
1.3.6.1.4.1.1872.2.5.2.2.1NodefdbStats
1.3.6.1.4.1.1872.2.5.2.2.1.1ScalarfdbStatsCreatesread-onlycurrentNumber of entries created in the Forwarding Database.
1.3.6.1.4.1.1872.2.5.2.2.1.2ScalarfdbStatsDeletesread-onlycurrentNumber of entries deleted from the Forwarding Database.
1.3.6.1.4.1.1872.2.5.2.2.1.3ScalarfdbStatsCurrentread-onlycurrentCurrent number of entries in the Forwarding Database.
1.3.6.1.4.1.1872.2.5.2.2.1.4ScalarfdbStatsHiwatread-onlycurrentHighest number of entries recorded at any given time in the Forwarding Database.
1.3.6.1.4.1.1872.2.5.2.2.1.5ScalarfdbStatsLookupsread-onlycurrentNumber of entry lookups in the Forwarding Database.
1.3.6.1.4.1.1872.2.5.2.2.1.6ScalarfdbStatsLookupFailsread-onlycurrentNumber of unsuccessful searches made in the Forwarding Database.
1.3.6.1.4.1.1872.2.5.2.2.1.7ScalarfdbStatsFindsread-onlycurrentNumber of searches in the Forwarding Database.
1.3.6.1.4.1.1872.2.5.2.2.1.8ScalarfdbStatsFindFailsread-onlycurrentNumber of search failures in the Forwarding Database.
1.3.6.1.4.1.1872.2.5.2.2.1.9ScalarfdbStatsFindOrCreatesread-onlycurrentNumber of entries found or created in the Forwarding Database.
1.3.6.1.4.1.1872.2.5.2.2.1.10ScalarfdbStatsOverflowsread-onlycurrentNumber of entries overflowing the Forwarding Database.
1.3.6.1.4.1.1872.2.5.2.2.2NodestpStats
1.3.6.1.4.1.1872.2.5.2.2.2.1TablestgStatsPortTablenot-accessiblecurrentThe table of Spanning Tree Group port statistics.
1.3.6.1.4.1.1872.2.5.2.2.2.1.1RowstgStatsPortTableEntrynot-accessiblecurrentStatistics about port of a particular Spanning Tree Group.
1.3.6.1.4.1.1872.2.5.2.2.2.1.1.1ColumnstgStatsStpIndexread-onlycurrentThe identifier of a particular Spanning Tree Group.
1.3.6.1.4.1.1872.2.5.2.2.2.1.1.2ColumnstgStatsPortIndexread-onlycurrentThe port identifier of a particular Spanning Tree Group.
1.3.6.1.4.1.1872.2.5.2.2.2.1.1.3ColumnstgStatsPortRcvCfgBpdusread-onlycurrentNumber of Configuration BPDU's received on this port.
1.3.6.1.4.1.1872.2.5.2.2.2.1.1.4ColumnstgStatsPortRcvTcnBpdusread-onlycurrentNumber of TCN BPDU's received on this port.
1.3.6.1.4.1.1872.2.5.2.2.2.1.1.5ColumnstgStatsPortXmtCfgBpdusread-onlycurrentNumber of Configuration BPDU's trasmitted from the port.
1.3.6.1.4.1.1872.2.5.2.2.2.1.1.6ColumnstgStatsPortXmtTcnBpdusread-onlycurrentNumber of TCN BPDU's trasmitted from the port.
1.3.6.1.4.1.1872.2.5.2.3Nodelayer2Info
1.3.6.1.4.1.1872.2.5.2.3.1NodefdbInfo
1.3.6.1.4.1.1872.2.5.2.3.1.1ScalarfdbClearread-writecurrentSetting this value to clear(2) clears the entire master FDB.
1.3.6.1.4.1.1872.2.5.2.3.1.2TablefdbTablenot-accessiblecurrentThe table of FDB entries.
1.3.6.1.4.1.1872.2.5.2.3.1.2.1RowfdbEntrynot-accessiblecurrentA row in the FDB table
1.3.6.1.4.1.1872.2.5.2.3.1.2.1.1ColumnfdbMacAddrread-onlycurrentThe MAC address for the FDB entry.
1.3.6.1.4.1.1872.2.5.2.3.1.2.1.2ColumnfdbVlanread-onlycurrentThe VLAN ID for the FDB entry.
1.3.6.1.4.1.1872.2.5.2.3.1.2.1.3ColumnfdbSrcPortread-onlycurrentEither the value '0', or the port number of the port on which a frame having a source address equal to the value of the corresponding instance has been seen. A…
1.3.6.1.4.1.1872.2.5.2.3.1.2.1.4ColumnfdbStateread-onlycurrentThe state of the FDB entry. The meanings of the values are : unknown(1) : the MAC address has not yet been learned by the switch but has only been seen as a de…
1.3.6.1.4.1.1872.2.5.2.3.1.2.1.5ColumnfdbRefSpsread-onlycurrentThe referenced SPs associated with this FDB entry.
1.3.6.1.4.1.1872.2.5.2.3.1.2.1.6ColumnfdbLearnedPortread-onlycurrentThe learned port associated with this FDB entry.
1.3.6.1.4.1.1872.2.5.2.3.1.2.1.7ColumnfdbSrcTrunkread-onlycurrentEither the value '0', or the trunk number of the trunk on which a frame having a source address equal to the value of the corresponding instance has been seen.…
1.3.6.1.4.1.1872.2.5.2.3.2NodestpInfo
1.3.6.1.4.1.1872.2.5.2.3.2.1TablestpInfoTablenot-accessiblecurrentThe table of Spanning Tree Group information.
1.3.6.1.4.1.1872.2.5.2.3.2.1.1RowstpInfoTableEntrynot-accessiblecurrentInformation about a particular Spanning Tree Group.
1.3.6.1.4.1.1872.2.5.2.3.2.1.1.1ColumnstpInfoIndexread-onlycurrentThe identifier of a particular Spanning Tree Group. This is also index to the entLogicalTable of Entity MIB.
1.3.6.1.4.1.1872.2.5.2.3.2.1.1.2ColumnstpInfoTimeSinceTopChangeread-onlycurrentThe time (in hundredths of a second) since the last time a topology change was detected by the bridge entity.
1.3.6.1.4.1.1872.2.5.2.3.2.1.1.3ColumnstpInfoTopChangesread-onlycurrentThe total number of topology changes detected by this bridge since the management entity was last reset or initialized.
1.3.6.1.4.1.1872.2.5.2.3.2.1.1.4ColumnstpInfoDesignatedRootread-onlycurrentThe bridge identifier of the root of the spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the Root Ide…
1.3.6.1.4.1.1872.2.5.2.3.2.1.1.5ColumnstpInfoRootCostread-onlycurrentThe cost of the path to the root as seen from this bridge.
1.3.6.1.4.1.1872.2.5.2.3.2.1.1.6ColumnstpInfoRootPortread-onlycurrentThe port number of the port which offers the lowest cost path from this bridge to the root bridge.
1.3.6.1.4.1.1872.2.5.2.3.2.1.1.7ColumnstpInfoMaxAgeread-onlycurrentThe maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is …
1.3.6.1.4.1.1872.2.5.2.3.2.1.1.8ColumnstpInfoHelloTimeread-onlycurrentThe amount of time between the transmission of Configuration bridge PDUs by this node on any port when it is the root of the spanning tree or trying to become …
1.3.6.1.4.1.1872.2.5.2.3.2.1.1.9ColumnstpInfoForwardDelayread-onlycurrentThis time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The…
1.3.6.1.4.1.1872.2.5.2.3.2.1.1.10ColumnstpInfoHoldTimeread-onlycurrentThis time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredth…
1.3.6.1.4.1.1872.2.5.2.3.2.2TablestpInfoPortTablenot-accessiblecurrentThe table of Spanning Tree Group port information.
1.3.6.1.4.1.1872.2.5.2.3.2.2.1RowstpInfoPortTableEntrynot-accessiblecurrentInformation about port configuration for a particular Spanning Tree Group.
1.3.6.1.4.1.1872.2.5.2.3.2.2.1.1ColumnstpInfoPortStpIndexread-onlycurrentThe identifier of a particular Spanning Tree Group.
1.3.6.1.4.1.1872.2.5.2.3.2.2.1.2ColumnstpInfoPortIndexread-onlycurrentThe port identifier of a particular Spanning Tree Group.
1.3.6.1.4.1.1872.2.5.2.3.2.2.1.3ColumnstpInfoPortStateread-onlycurrentThe port's current state as defined by application of the Spanning Tree Protocol. This state controls what action a port takes on reception of a frame. If the …
1.3.6.1.4.1.1872.2.5.2.3.2.2.1.4ColumnstpInfoPortDesignatedRootread-onlycurrentThe unique Bridge Identifier of the Bridge recorded as the Root in the Configuration BPDUs transmitted by the Designated Bridge for the segment to which the po…
1.3.6.1.4.1.1872.2.5.2.3.2.2.1.5ColumnstpInfoPortDesignatedCostread-onlycurrentThe path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.
1.3.6.1.4.1.1872.2.5.2.3.2.2.1.6ColumnstpInfoPortDesignatedBridgeread-onlycurrentThe Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.
1.3.6.1.4.1.1872.2.5.2.3.2.2.1.7ColumnstpInfoPortDesignatedPortread-onlycurrentThe Port Identifier of the port on the Designated Bridge for this port's segment.
1.3.6.1.4.1.1872.2.5.2.3.2.2.1.8ColumnstpInfoPortForwardTransitionsread-onlycurrentThe number of times this port has transitioned from the Learning state to the Forwarding state.
1.3.6.1.4.1.1872.2.5.2.3.2.2.1.9ColumnstpInfoPortPathCostread-onlycurrentThe path cost of the port.
1.3.6.1.4.1.1872.2.5.2.3.2.2.1.10ColumnstpInfoPortRoleread-onlycurrentThe port role. Returns unknown(7) when MSTP/RSTP is not enabled, otherwise returns appropriate port role.
1.3.6.1.4.1.1872.2.5.2.3.2.2.1.11ColumnstpInfoPortLinkTyperead-onlycurrentThe point-to-point status of the LAN segment attached to this port. A value of p2p (1) indicates that this port is being treated as if it is connected to a poi…
1.3.6.1.4.1.1872.2.5.2.3.2.2.1.12ColumnstpInfoPortEdgeread-onlycurrentThe port is an edge port or not. Returns disabled(2) when the port is not an edge port and returns enabled(1) when it is an edge port.
1.3.6.1.4.1.1872.2.5.2.3.3NodelacpInfo
1.3.6.1.4.1.1872.2.5.2.3.3.1TablelacpInfoPortTablenot-accessiblecurrentThe table of LACP port information.
1.3.6.1.4.1.1872.2.5.2.3.3.1.1RowlacpInfoPortTableEntrynot-accessiblecurrentInformation about a LACP port.
1.3.6.1.4.1.1872.2.5.2.3.3.1.1.1ColumnlacpInfoPortIndexread-onlycurrentThe port identifier.
1.3.6.1.4.1.1872.2.5.2.3.3.1.1.2ColumnlacpInfoPortSelectedread-onlycurrentSelected flag value indicates that the selection logic has selected an appropriate Aggregator. A value of unselected indicates that no aggregator is currently …
1.3.6.1.4.1.1872.2.5.2.3.3.1.1.3ColumnlacpInfoPortNttread-onlycurrentNeed to transmit flag. True indicates that there is new protocol information that should be transmitted on the link.
1.3.6.1.4.1.1872.2.5.2.3.3.1.1.4ColumnlacpInfoPortReadyNread-onlycurrentTrue value for Ready_N flag indicates that the wait while timer has expired and it is waiting to attach to an aggregator. There is one Ready_N value for each p…
1.3.6.1.4.1.1872.2.5.2.3.3.1.1.5ColumnlacpInfoPortMovedread-onlycurrentPort Moved flag is set to true if the receive machine for a port is in the port_disabled state, and the combination of partner oper system and partner oper por…
1.3.6.1.4.1.1872.2.5.2.3.4NodecistInfo
1.3.6.1.4.1.1872.2.5.2.3.4.1NodecistGeneralInfo
1.3.6.1.4.1.1872.2.5.2.3.4.1.1ScalarcistRootread-onlycurrentThe bridge identifier of the Root of the common spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the C…
1.3.6.1.4.1.1872.2.5.2.3.4.1.2ScalarcistRootPathCostread-onlycurrentThe cost of the path to the CIST Root as seen from this bridge.
1.3.6.1.4.1.1872.2.5.2.3.4.1.3ScalarcistRootPortread-onlycurrentThe Port Number of the Port which offers the lowest path cost from this bridge to the CIST Root Bridge.
1.3.6.1.4.1.1872.2.5.2.3.4.1.4ScalarcistBridgeHelloTimeread-onlycurrentThe amount of time between the transmission of Configuration bridge PDUs in seconds.
1.3.6.1.4.1.1872.2.5.2.3.4.1.5ScalarcistBridgeMaxAgeread-onlycurrentThe value in seconds that all bridges use for MaxAge when this bridge is acting as the root.
1.3.6.1.4.1.1872.2.5.2.3.4.1.6ScalarcistBridgeForwardDelayread-onlycurrentThe value in seconds that all bridges use for ForwardDelay when this bridge is acting as the root.
1.3.6.1.4.1.1872.2.5.2.3.4.1.7ScalarcistRegionalRootread-onlycurrentThe bridge identifier of the Root of the Multiple spanning tree region as determined by the Spanning Tree Protocol as executed by this node. This value is used…
1.3.6.1.4.1.1872.2.5.2.3.4.1.8ScalarcistRegionalPathCostread-onlycurrentThe Cost of the path to the CIST Regional Root as seen from this bridge.
1.3.6.1.4.1.1872.2.5.2.3.4.2TablecistInfoPortTablenot-accessiblecurrentThe table of CIST Port information.
1.3.6.1.4.1.1872.2.5.2.3.4.2.1RowcistInfoPortTableEntrynot-accessiblecurrentInformation about a particular CIST Port.
1.3.6.1.4.1.1872.2.5.2.3.4.2.1.1ColumncistInfoPortIndexread-onlycurrentThe port number of the port for which this entry contains spanning tree configuration.
1.3.6.1.4.1.1872.2.5.2.3.4.2.1.2ColumncistInfoPortPriorityread-onlycurrentThe four most significant bits of the Port Identifier of the Spanning Tree instance can be modified by setting this value.
1.3.6.1.4.1.1872.2.5.2.3.4.2.1.3ColumncistInfoPortPathCostread-onlycurrentThe contribution of this port to the path cost of paths towards the CIST Root which include this port.
1.3.6.1.4.1.1872.2.5.2.3.4.2.1.4ColumncistInfoPortStateread-onlycurrentCurrent state of the Port as defined by the Common spanning tree protocol.
1.3.6.1.4.1.1872.2.5.2.3.4.2.1.5ColumncistInfoPortRoleread-onlycurrentSelected Port Role of the port for this spanning tree instance.
1.3.6.1.4.1.1872.2.5.2.3.4.2.1.6ColumncistInfoPortDesignatedBridgeread-onlycurrentThe unique Bridge Identifier of the bridge which this port considers to be the Designated Bridge for the port's segment.
1.3.6.1.4.1.1872.2.5.2.3.4.2.1.7ColumncistInfoPortDesignatedPortread-onlycurrentThe Port identifier of the port on the Designated Bridge for this port's segment.
1.3.6.1.4.1.1872.2.5.2.3.4.2.1.8ColumncistInfoPortLinkTyperead-onlycurrentThe point-to-point status of the LAN segment attached to this port. A value of p2p (2) indicates that this port is being treated as if it is connected to a poi…
1.3.6.1.4.1.1872.2.5.2.3.5NodevlanInfo
1.3.6.1.4.1.1872.2.5.2.3.5.1TablevlanInfoTablenot-accessiblecurrentThe table of VLAN information.
1.3.6.1.4.1.1872.2.5.2.3.5.1.1RowvlanInfoTableEntrynot-accessiblecurrentInformation about a particular VLAN.
1.3.6.1.4.1.1872.2.5.2.3.5.1.1.1ColumnvlanInfoIdread-onlycurrentThe VLAN identifier.
1.3.6.1.4.1.1872.2.5.2.3.5.1.1.2ColumnvlanInfoNameread-onlycurrentThe VLAN name.
1.3.6.1.4.1.1872.2.5.2.3.5.1.1.3ColumnvlanInfoStatusread-onlycurrentEnable or disable, VLAN state information
1.3.6.1.4.1.1872.2.5.2.3.5.1.1.4ColumnvlanInfoJumboread-onlycurrentEnable or disable Jumbo frames, Jumbo frames state information of a VLAN
1.3.6.1.4.1.1872.2.5.2.3.5.1.1.5ColumnvlanInfoBwmContractread-onlycurrentDefault BWM contract number information of a VLAN
1.3.6.1.4.1.1872.2.5.2.3.5.1.1.6ColumnvlanInfoLearnread-onlycurrentEnable or disable source MAC address learning, MAC address learning information of a VLAN
1.3.6.1.4.1.1872.2.5.2.3.5.1.1.7ColumnvlanInfoPortsread-onlycurrentThe port list information in the VLAN. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... || || |_ por…
1.3.6.1.4.1.1872.2.5.2.3.6NodeportTeamInfo
1.3.6.1.4.1.1872.2.5.2.3.6.1TableportTeamInfoTablenot-accessiblecurrentThe port team information table.
1.3.6.1.4.1.1872.2.5.2.3.6.1.1RowportTeamInfoTableEntrynot-accessiblecurrentA row in the port team information table.
1.3.6.1.4.1.1872.2.5.2.3.6.1.1.1ColumnportTeamInfoIndexread-onlycurrentThe identifier of the port team.
1.3.6.1.4.1.1872.2.5.2.3.6.1.1.2ColumnportTeamInfoStateread-onlycurrentState of a port team.
1.3.6.1.4.1.1872.2.5.2.3.6.1.1.3ColumnportTeamInfoPortsread-onlycurrentThe port list in the port team. The ports are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | |||_ port 8 | || …
1.3.6.1.4.1.1872.2.5.2.3.6.1.1.4ColumnportTeamInfoPortsStateread-onlycurrentThe port state list in the port team. The ports states are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | |||_…
1.3.6.1.4.1.1872.2.5.2.3.6.1.1.5ColumnportTeamInfoTrunksread-onlycurrentThe trunk list in the port team. The trunks are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | |||_ trunk 8 | …
1.3.6.1.4.1.1872.2.5.2.3.6.1.1.6ColumnportTeamInfoTrunksStateread-onlycurrentThe trunk state list in the trunk team. The trunks states are presented in bitmap format. in receiving order: OCTET 1 OCTET 2 ..... xxxxxxxx xxxxxxxx ..... | |…
1.3.6.1.4.1.1872.2.5.2.4Nodelayer2Oper
MIB Viewer