ALTIGA-L2TP-STATS-MIB
108 objects
The Altiga L2TP Statistics MIB models counters and objects that are of management interest for L2TP tunnels. Acronyms The following acronyms are used in this document: AVP: Attribute/Value Pair CLID: Calling Line ID DNIS: Dialed Number Identification Service L2TP: Layer 2 Tunnel Protocol LAC: L2TP Access Concentrator LNS: L2TP Network Server MIB: Management Information Base RWS: Receive Window Size
Imported Objects
| ALTIGA-GLOBAL-REG | alL2tpMibModule |
| ALTIGA-MIB | alL2tpGroup alStatsL2tp |
| IF-MIB | InterfaceIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DisplayString RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3076.1.1.21.2 | IdentityaltigaL2tpStatsMibModule | The Altiga L2TP Statistics MIB models counters and objects that are of management interest for L2TP tunnels. Acronyms The following acronyms are used in this d… | ||
| 1.3.6.1.4.1.3076.1.1.21.2.1 | NodealtigaL2tpStatsMibConformance | |||
| 1.3.6.1.4.1.3076.1.1.21.2.1.1 | NodealtigaL2tpStatsMibCompliances | |||
| 1.3.6.1.4.1.3076.1.1.21.2.1.1.1 | CompliancealtigaL2tpStatsMibCompliance | current | The compliance statement for agents which implement the Altiga L2TP Statistics MIB. | |
| 1.3.6.1.4.1.3076.2.1.1.1.16.2 | GroupaltigaL2tpStatsGroup | current | The objects for L2TP statistics. | |
| 1.3.6.1.4.1.3076.2.1.1.1.16.3 | GroupaltigaL2tpStatsDepGroup | deprecated | The deprecated objects for L2TP statistics. | |
| 1.3.6.1.4.1.3076.2.1.2.16.1 | NodealStatsL2tpGlobal | |||
| 1.3.6.1.4.1.3076.2.1.2.16.1.1 | ScalaralL2tpStatsLocalProtVers | read-only | current | This object describes the protocol version and revision of the local implementation. The first octet contains the protocol version. The second octet contains t… |
| 1.3.6.1.4.1.3076.2.1.2.16.1.2 | ScalaralL2tpStatsVendorName | read-only | current | This object identifies the Vendor name. |
| 1.3.6.1.4.1.3076.2.1.2.16.1.3 | ScalaralL2tpStatsFirmwareRev | read-only | current | This object defines the firmware revision. |
| 1.3.6.1.4.1.3076.2.1.2.16.1.4 | ScalaralL2tpStatsTotalTunnels | read-only | current | This object returns the total number of tunnels that have successfully reached the established state. |
| 1.3.6.1.4.1.3076.2.1.2.16.1.5 | ScalaralL2tpStatsFailedTunnels | read-only | current | This object returns the number of tunnels that failed to reach the established state. |
| 1.3.6.1.4.1.3076.2.1.2.16.1.6 | ScalaralL2tpStatsFailedAuthentications | read-only | current | This object returns the number of failed tunnel connection attempts because the tunnel peer failed authentication. |
| 1.3.6.1.4.1.3076.2.1.2.16.1.7 | ScalaralL2tpStatsActiveTunnels | read-only | current | This object returns the number of tunnels that are currently active. |
| 1.3.6.1.4.1.3076.2.1.2.16.1.8 | ScalaralL2tpStatsMaxTunnels | read-only | current | The maximum number of simultaneously active L2TP tunnels since the system was booted. |
| 1.3.6.1.4.1.3076.2.1.2.16.1.9 | ScalaralL2tpStatsTotalSessions | read-only | current | This object returns the total number of sessions that have successfully reached the established state. |
| 1.3.6.1.4.1.3076.2.1.2.16.1.10 | ScalaralL2tpStatsFailedSessions | read-only | current | This object returns the number of sessions that failed to reach the established state for this tunnel domain. |
| 1.3.6.1.4.1.3076.2.1.2.16.1.11 | ScalaralL2tpStatsActiveSessions | read-only | current | This object returns the number of sessions that are currently active. |
| 1.3.6.1.4.1.3076.2.1.2.16.1.12 | ScalaralL2tpStatsMaxSessions | read-only | current | The maximum number of simultaneously active L2TP sessions since the system was booted. |
| 1.3.6.1.4.1.3076.2.1.2.16.1.13 | ScalaralL2tpStatsControlRecvOctets | read-only | current | This object returns the number of control channel octets received. |
| 1.3.6.1.4.1.3076.2.1.2.16.1.14 | ScalaralL2tpStatsControlRecvPackets | read-only | current | This object returns the number of control packets received. |
| 1.3.6.1.4.1.3076.2.1.2.16.1.15 | ScalaralL2tpStatsControlRecvDiscards | read-only | current | This object returns the number of control packets received that were discarded. |
| 1.3.6.1.4.1.3076.2.1.2.16.1.16 | ScalaralL2tpStatsControlSendOctets | read-only | current | This object returns the number of control channel octets that were transmitted to tunnel endpoints. |
| 1.3.6.1.4.1.3076.2.1.2.16.1.17 | ScalaralL2tpStatsControlSendPackets | read-only | current | This object returns the number of control packets that were transmitted to tunnel endpoints. |
| 1.3.6.1.4.1.3076.2.1.2.16.1.18 | ScalaralL2tpStatsPayloadRecvOctets | read-only | current | This object returns the number of payload channel octets that were received. |
| 1.3.6.1.4.1.3076.2.1.2.16.1.19 | ScalaralL2tpStatsPayloadRecvPackets | read-only | current | This object returns the number of payload packets that were received. |
| 1.3.6.1.4.1.3076.2.1.2.16.1.20 | ScalaralL2tpStatsPayloadRecvDiscards | read-only | current | This object returns the number of received payload packets that were discarded. |
| 1.3.6.1.4.1.3076.2.1.2.16.1.21 | ScalaralL2tpStatsPayloadSendOctets | read-only | current | This object returns the number of payload channel octets that were transmitted to tunnel peers. |
| 1.3.6.1.4.1.3076.2.1.2.16.1.22 | ScalaralL2tpStatsPayloadSendPackets | read-only | current | This object returns the number of payload packets that were transmitted to tunnel peers. |
| 1.3.6.1.4.1.3076.2.1.2.16.2 | TablealL2tpStatsTunnelTable | not-accessible | current | The L2TP tunnel status and statistics table. |
| 1.3.6.1.4.1.3076.2.1.2.16.2.1 | RowalL2tpStatsTunnelEntry | not-accessible | current | An entry in the alL2tpStatsTunnelTable. |
| 1.3.6.1.4.1.3076.2.1.2.16.2.1.1 | ColumnalL2tpStatsTunnelRowStatus | read-write | current | The status of this row. Used to terminate the tunnel, cannot be used to create a tunnel. |
| 1.3.6.1.4.1.3076.2.1.2.16.2.1.2 | ColumnalL2tpStatsTunnelPeerIpAddr | read-only | current | The peer's IP address for this tunnel. |
| 1.3.6.1.4.1.3076.2.1.2.16.2.1.3 | ColumnalL2tpStatsTunnelLocalTID | read-only | current | This object contains the local tunnel Identifier. |
| 1.3.6.1.4.1.3076.2.1.2.16.2.1.4 | ColumnalL2tpStatsTunnelRemoteTID | read-only | current | This object contains the remote tunnel Identifier. |
| 1.3.6.1.4.1.3076.2.1.2.16.2.1.5 | ColumnalL2tpStatsTunnelState | read-only | current | This field contains the current state of the control tunnel. |
| 1.3.6.1.4.1.3076.2.1.2.16.2.1.6 | ColumnalL2tpStatsTunnelInitiated | read-only | current | This object indicates whether the tunnel was initiated locally or by the remote tunnel peer. |
| 1.3.6.1.4.1.3076.2.1.2.16.2.1.7 | ColumnalL2tpStatsTunnelRemoteHostName | read-only | current | This object contains the host name as discovered during the tunnel establishment phase (via the Host Name AVP) of the L2TP peer. If the tunnel is idle this obj… |
| 1.3.6.1.4.1.3076.2.1.2.16.2.1.8 | ColumnalL2tpStatsTunnelRemoteVendorName | read-only | current | This object identifies the vendor name of the peer's L2TP implementation. If the tunnel is idle this object should maintain its value from the last time it was… |
| 1.3.6.1.4.1.3076.2.1.2.16.2.1.9 | ColumnalL2tpStatsTunnelRemoteFirmwareRevision | read-only | current | This object contains the tunnel peer's firmware revision number. If the tunnel is idle this object should maintain its value from the last time it was connecte… |
| 1.3.6.1.4.1.3076.2.1.2.16.2.1.10 | ColumnalL2tpStatsTunnelRemoteProtocolVersion | read-only | current | This object describes the protocol version and revision of the tunnel peers implementation. The first octet contains the protocol version. The second octet con… |
| 1.3.6.1.4.1.3076.2.1.2.16.2.1.11 | ColumnalL2tpStatsTunnelInitialRemoteRWS | read-only | current | This object contains the initial remote peer's receive window size as indicated by the tunnel peer (in the RWS AVP) during the tunnel establishment phase. If t… |
| 1.3.6.1.4.1.3076.2.1.2.16.2.1.12 | ColumnalL2tpStatsTunnelBearerCapabilities | read-only | current | This object describes the Bearer Capabilities of the tunnel peer. If the tunnel is idle this object should maintain its value from the last time it was connect… |
| 1.3.6.1.4.1.3076.2.1.2.16.2.1.13 | ColumnalL2tpStatsTunnelFramingCapabilities | read-only | current | This object describes the Framing Capabilities of the tunnel peer. If the tunnel is idle this object should maintain its value from the last time it was connec… |
| 1.3.6.1.4.1.3076.2.1.2.16.2.1.14 | ColumnalL2tpStatsTunnelControlRecvPackets | read-only | current | This object contains the number of control packets received on the tunnel. |
| 1.3.6.1.4.1.3076.2.1.2.16.2.1.15 | ColumnalL2tpStatsTunnelControlRecvDiscards | read-only | current | This object returns the number of received payload packets that were discarded. |
| 1.3.6.1.4.1.3076.2.1.2.16.2.1.16 | ColumnalL2tpStatsTunnelControlRecvZLB | read-only | current | This object returns a count of the number of Zero Length Body control packet acknowledgement packets that were received. |
| 1.3.6.1.4.1.3076.2.1.2.16.2.1.17 | ColumnalL2tpStatsTunnelControlOutOfSequence | read-only | current | This object returns a count of the number of control packets that were not received in the correct order (as per the sequence number) on this tunnel. |
| 1.3.6.1.4.1.3076.2.1.2.16.2.1.18 | ColumnalL2tpStatsTunnelControlOutOfWindow | read-only | current | This object contains the number of control packets that were received outside of the offered receive window. It is implementation specific as to whether these … |
| 1.3.6.1.4.1.3076.2.1.2.16.2.1.19 | ColumnalL2tpStatsTunnelControlSendPackets | read-only | current | This object contains the number of control packets that were transmitted to the tunnel peer. |
| 1.3.6.1.4.1.3076.2.1.2.16.2.1.20 | ColumnalL2tpStatsTunnelControlSendZLB | read-only | current | This object contains the number of Zero Length Body control packets that were transmitted to the tunnel peer. |
| 1.3.6.1.4.1.3076.2.1.2.16.2.1.21 | ColumnalL2tpStatsTunnelControlAckTimeouts | read-only | current | This object returns a count of the number of control packet timeouts due to the lack of a timely acknowledgement from the tunnel peer. |
| 1.3.6.1.4.1.3076.2.1.2.16.2.1.22 | ColumnalL2tpStatsTunnelCurrentRemoteRWS | read-only | current | This object contains the current remote receive window size as determined by the local flow control mechanism employed. |
| 1.3.6.1.4.1.3076.2.1.2.16.2.1.23 | ColumnalL2tpStatsTunnelSendSeq | read-only | current | This object contains the next send sequence number for the control channel. |
| 1.3.6.1.4.1.3076.2.1.2.16.2.1.24 | ColumnalL2tpStatsTunnelSendSeqAck | read-only | current | This object contains the send sequence number that the tunnel peer has acknowledged for the control channel. The flow control state can be determined by subtra… |
| 1.3.6.1.4.1.3076.2.1.2.16.2.1.25 | ColumnalL2tpStatsTunnelRecvSeq | read-only | current | This object contains the next receive sequence number expected to be received on this control channel. |
| 1.3.6.1.4.1.3076.2.1.2.16.2.1.26 | ColumnalL2tpStatsTunnelRecvSeqAck | read-only | current | This object contains the last receive sequence number that was acknowledged back to the tunnel peer for the control channel. |
| 1.3.6.1.4.1.3076.2.1.2.16.2.1.27 | ColumnalL2tpStatsTunnelTotalSessions | read-only | current | This object contains the total number of sessions that this tunnel has successfully connected through to its tunnel peer since this tunnel was created. |
| 1.3.6.1.4.1.3076.2.1.2.16.2.1.28 | ColumnalL2tpStatsTunnelFailedSessions | read-only | current | This object contains the total number of sessions that were initiated but failed to reach the established phase. |
| 1.3.6.1.4.1.3076.2.1.2.16.2.1.29 | ColumnalL2tpStatsTunnelActiveSessions | read-only | current | This object contains the total number of sessions for this tunnel. |
| 1.3.6.1.4.1.3076.2.1.2.16.2.1.30 | ColumnalL2tpStatsTunnelLastResultCode | read-only | current | This object contains the last value of the result code as described in the Result Code AVP which caused the tunnel to disconnect. |
| 1.3.6.1.4.1.3076.2.1.2.16.2.1.31 | ColumnalL2tpStatsTunnelLastErrorCode | read-only | current | This object contains the last value of the error code as described in the Result Code AVP which caused the tunnel to disconnect. |
| 1.3.6.1.4.1.3076.2.1.2.16.2.1.32 | ColumnalL2tpStatsTunnelLastErrorMessage | read-only | current | This object contains the last value of the optional message as described in the Result Code AVP which caused the tunnel to disconnect. |
| 1.3.6.1.4.1.3076.2.1.2.16.3 | TablealL2tpStatsSessionTable | not-accessible | current | The L2TP session status and statistics table. |
| 1.3.6.1.4.1.3076.2.1.2.16.3.1 | RowalL2tpStatsSessionEntry | not-accessible | current | An L2TP session interface stats entry. |
| 1.3.6.1.4.1.3076.2.1.2.16.3.1.1 | ColumnalL2tpStatsSessionRowStatus | read-write | current | The status of this row. Used to terminate the session, cannot be used to create a session. |
| 1.3.6.1.4.1.3076.2.1.2.16.3.1.2 | ColumnalL2tpStatsSessionIfIndex | read-only | current | This value for this object is equal to the value of ifIndex of the Interfaces MIB for session interfaces of type L2TP. |
| 1.3.6.1.4.1.3076.2.1.2.16.3.1.3 | ColumnalL2tpStatsSessionTID | read-only | current | This object contains the control channel tunnel identifier for this session. |
| 1.3.6.1.4.1.3076.2.1.2.16.3.1.4 | ColumnalL2tpStatsSessionLocalCID | read-only | current | This object contains the local call identifier for the session. |
| 1.3.6.1.4.1.3076.2.1.2.16.3.1.5 | ColumnalL2tpStatsSessionRemoteCID | read-only | current | This object contains the remote call identifier for the session. |
| 1.3.6.1.4.1.3076.2.1.2.16.3.1.6 | ColumnalL2tpStatsSessionUserName | read-only | current | This object identifies the peer session name on this interface. This is typically the login name of the remote user. If the user name is unknown to the local t… |
| 1.3.6.1.4.1.3076.2.1.2.16.3.1.7 | ColumnalL2tpStatsSessionState | read-only | current | This object contains the current state of the session. |
| 1.3.6.1.4.1.3076.2.1.2.16.3.1.8 | ColumnalL2tpStatsSessionCallType | read-only | current | This object indicates the type of call and the role this tunnel peer is providing for this session. For example, lacIncoming(1) indicates that this tunnel peer… |
| 1.3.6.1.4.1.3076.2.1.2.16.3.1.9 | ColumnalL2tpStatsSessionCallSerialNumber | read-only | current | This object contains the serial number that has been assigned to this session. |
| 1.3.6.1.4.1.3076.2.1.2.16.3.1.10 | ColumnalL2tpStatsSessionTxConnectSpeed | read-only | current | This object returns the last known transmit baud rate for this session. |
| 1.3.6.1.4.1.3076.2.1.2.16.3.1.11 | ColumnalL2tpStatsSessionRxConnectSpeed | read-only | current | This object returns the last known receive baud rate for this session. |
| 1.3.6.1.4.1.3076.2.1.2.16.3.1.12 | ColumnalL2tpStatsSessionCallBearerType | read-only | current | This object describes the bearer type of this session. |
| 1.3.6.1.4.1.3076.2.1.2.16.3.1.13 | ColumnalL2tpStatsSessionFramingType | read-only | current | This object describes the framing type of this session. |
| 1.3.6.1.4.1.3076.2.1.2.16.3.1.14 | ColumnalL2tpStatsSessionPhysChanId | read-only | current | This object contains the physical channel identifier for the session. |
| 1.3.6.1.4.1.3076.2.1.2.16.3.1.15 | ColumnalL2tpStatsSessionDNIS | read-only | current | This object identifies the Dialed Number Information String that the LAC obtained from the network for the session. If no DNIS was provided then a null string … |
| 1.3.6.1.4.1.3076.2.1.2.16.3.1.16 | ColumnalL2tpStatsSessionCLID | read-only | current | This object identifies the Calling Line ID that the LAC obtained from the network for the session. If no CLID was provided then a null string will be returned. |
| 1.3.6.1.4.1.3076.2.1.2.16.3.1.17 | ColumnalL2tpStatsSessionSubAddress | read-only | current | This object identifies the Sub Address that the LAC obtained from the network for the session. If no Sub Address was provided then a null string will be return… |
| 1.3.6.1.4.1.3076.2.1.2.16.3.1.18 | ColumnalL2tpStatsSessionPrivateGroupID | read-only | current | This object identifies the Private Group Identifier used for this tunneled session. If no Private Group Identifier was provided then a null string will be retu… |
| 1.3.6.1.4.1.3076.2.1.2.16.3.1.19 | ColumnalL2tpStatsSessionProxyLcp | read-only | current | Indicates whether the LAC performed proxy LCP for this session. |
| 1.3.6.1.4.1.3076.2.1.2.16.3.1.20 | ColumnalL2tpStatsSessionAuthMethod | read-only | current | This object contains the proxy authentication method employed by the LAC for the session. If l2tpSessionProxyLcp is false(2) this object should not be interpre… |
| 1.3.6.1.4.1.3076.2.1.2.16.3.1.21 | ColumnalL2tpStatsSessionLocalRWS | read-only | deprecated | This object returns the local send window size for this session. If the value of the object alL2tpStatsSessionSequencingState is none(1) then this object shoul… |
| 1.3.6.1.4.1.3076.2.1.2.16.3.1.22 | ColumnalL2tpStatsSessionRemoteInitialRWS | read-only | deprecated | This object returns the initial remote send window size for this session. If the value of the object alL2tpStatsSessionSequencingState is none(1) then this obj… |
| 1.3.6.1.4.1.3076.2.1.2.16.3.1.23 | ColumnalL2tpStatsSessionRemotePPD | read-only | current | This object contains the Packet Processing Delay for the session. If the value of the object alL2tpStatsSessionSequencingState is none(1) then this object shou… |
| 1.3.6.1.4.1.3076.2.1.2.16.3.1.24 | ColumnalL2tpStatsSessionSequencingState | read-only | current | This object defines which tunnel peers have requested payload sequencing. The value of both(4) indicates that both peers have requested payload sequencing. |
| 1.3.6.1.4.1.3076.2.1.2.16.3.1.25 | ColumnalL2tpStatsSessionRecvOctets | read-only | current | This object returns the total number payload octets received for this session. |
| 1.3.6.1.4.1.3076.2.1.2.16.3.1.26 | ColumnalL2tpStatsSessionRecvPackets | read-only | current | This object returns the total number of payload packets received for this session. |
| 1.3.6.1.4.1.3076.2.1.2.16.3.1.27 | ColumnalL2tpStatsSessionRecvDiscards | read-only | current | This object returns the total number of payload packets received that were discarded for this session. |
| 1.3.6.1.4.1.3076.2.1.2.16.3.1.28 | ColumnalL2tpStatsSessionRecvZLB | read-only | deprecated | This object returns the total number of Zero Length Body acknowlegement payload packets received for this session. |
| 1.3.6.1.4.1.3076.2.1.2.16.3.1.29 | ColumnalL2tpStatsSessionOutSequence | read-only | current | This object returns the total number of packets received for this session which were received out of sequence. |
| 1.3.6.1.4.1.3076.2.1.2.16.3.1.30 | ColumnalL2tpStatsSessionOutOfWindow | read-only | deprecated | This object returns a count of the number of payload packets that were received outside of the expected window for this session. |
| 1.3.6.1.4.1.3076.2.1.2.16.3.1.31 | ColumnalL2tpStatsSessionSendOctets | read-only | current | This object returns the total number of payload octets transmitted for this session. |
| 1.3.6.1.4.1.3076.2.1.2.16.3.1.32 | ColumnalL2tpStatsSessionSendPackets | read-only | current | This object returns the total number of payload packets transmitted for this session. |
| 1.3.6.1.4.1.3076.2.1.2.16.3.1.33 | ColumnalL2tpStatsSessionSendZLB | read-only | deprecated | This object returns the total number of Zero Length Body acknowledgement packets transmitted for this session. |
| 1.3.6.1.4.1.3076.2.1.2.16.3.1.34 | ColumnalL2tpStatsSessionAckTimeouts | read-only | deprecated | This object returns the total number of acknowledgement timeouts seen on payload packets for this session. |
| 1.3.6.1.4.1.3076.2.1.2.16.3.1.35 | ColumnalL2tpStatsSessionReassemblyTimeouts | read-only | current | This object returns the number of reassembly time outs that have occured for this session. |
| 1.3.6.1.4.1.3076.2.1.2.16.3.1.36 | ColumnalL2tpStatsSessionCurrentRemoteRWS | read-only | deprecated | This object contains the current remote receive window size as determined by the local flow control mechanism employed. |
| 1.3.6.1.4.1.3076.2.1.2.16.3.1.37 | ColumnalL2tpStatsSessionSendSeq | read-only | current | This object contains the next send sequence number for for this session. |
| 1.3.6.1.4.1.3076.2.1.2.16.3.1.38 | ColumnalL2tpStatsSessionSendSeqAck | read-only | current | This object contains the send sequence number that the tunnel peer has acknowledged for the payload channel. The flow control state can be determined by subtra… |
| 1.3.6.1.4.1.3076.2.1.2.16.3.1.39 | ColumnalL2tpStatsSessionSendSeqResets | read-only | deprecated | This object contains the total number of sequence number resets (payload packets with the R-bit set) sent on this session. |
| 1.3.6.1.4.1.3076.2.1.2.16.3.1.40 | ColumnalL2tpStatsSessionRecvSeq | read-only | current | This object contains the next receive sequence number expected to be received on this session. |
| 1.3.6.1.4.1.3076.2.1.2.16.3.1.41 | ColumnalL2tpStatsSessionRecvSeqAck | read-only | current | This object contains the last receive sequence number that was acknowledged back to the tunnel peer for the session. |
| 1.3.6.1.4.1.3076.2.1.2.16.3.1.42 | ColumnalL2tpStatsSessionRecvSeqResets | read-only | deprecated | This object contains the total number of sequence number resets (payload packets with the R-bit set) received on this session. |
| 1.3.6.1.4.1.3076.2.1.2.16.3.1.43 | ColumnalL2tpStatsSessionTunnelPeerIpAddr | read-only | current | The peer's IP address for the tunnel to which this session belongs. |