ALTIGA-PPTP-STATS-MIB
71 objects
The Altiga PPTP Statistics MIB models counters and objects that are of management interest for PPTP tunnels. Acronyms The following acronyms are used in this document: MIB: Management Information Base PPTP: Point-to-Point Tunneling Protocol
Imported Objects
| ALTIGA-GLOBAL-REG | alPptpMibModule |
| ALTIGA-MIB | alPptpGroup alStatsPptp |
| SNMPv2-CONF | MODULE-COMPLIANCE OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 Integer32 IpAddress MODULE-IDENTITY OBJECT-TYPE |
| SNMPv2-TC | DisplayString RowStatus TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.3076.1.1.10.2 | IdentityaltigaPptpStatsMibModule | The Altiga PPTP Statistics MIB models counters and objects that are of management interest for PPTP tunnels. Acronyms The following acronyms are used in this d… | ||
| 1.3.6.1.4.1.3076.1.1.10.2.1 | NodealtigaPptpStatsMibConformance | |||
| 1.3.6.1.4.1.3076.1.1.10.2.1.1 | NodealtigaPptpStatsMibCompliances | |||
| 1.3.6.1.4.1.3076.1.1.10.2.1.1.1 | CompliancealtigaPptpStatsMibCompliance | current | The compliance statement for agents which implement the Altiga PPTP Statistics MIB. | |
| 1.3.6.1.4.1.3076.2.1.1.1.3.2 | GroupaltigaPptpStatsGroup | current | The objects for PPTP statistics. | |
| 1.3.6.1.4.1.3076.2.1.2.3.1 | NodealStatsPptpGlobal | |||
| 1.3.6.1.4.1.3076.2.1.2.3.1.1 | ScalaralPptpStatsLocalProtVers | read-only | current | This object describes the protocol version and revision of the local implementation. The first octet contains the protocol version. The second octet contains t… |
| 1.3.6.1.4.1.3076.2.1.2.3.1.2 | ScalaralPptpStatsLocalFraming | read-only | current | A set of bits indicating the PPTP framing capabilities of this system. |
| 1.3.6.1.4.1.3076.2.1.2.3.1.3 | ScalaralPptpStatsLocalBearer | read-only | current | A set of bits indicating the PPTP bearer capabilities of this system. |
| 1.3.6.1.4.1.3076.2.1.2.3.1.4 | ScalaralPptpStatsLocalFirmwareRev | read-only | current | This object defines the local firmware revision. |
| 1.3.6.1.4.1.3076.2.1.2.3.1.5 | ScalaralPptpStatsTotalTunnels | read-only | current | This object returns the total number of tunnels, including those that did not reach the established state. |
| 1.3.6.1.4.1.3076.2.1.2.3.1.6 | ScalaralPptpStatsActiveTunnels | read-only | current | This object returns the number of tunnels that are currently active. |
| 1.3.6.1.4.1.3076.2.1.2.3.1.7 | ScalaralPptpStatsMaxTunnels | read-only | current | The maximum number of simultaneously active PPTP tunnels since the system was booted. |
| 1.3.6.1.4.1.3076.2.1.2.3.1.8 | ScalaralPptpStatsTotalSessions | read-only | current | This object returns the total number of sessions, including those that did not reach the established state. |
| 1.3.6.1.4.1.3076.2.1.2.3.1.9 | ScalaralPptpStatsActiveSessions | read-only | current | This object returns the number of sessions that are currently active. |
| 1.3.6.1.4.1.3076.2.1.2.3.1.10 | ScalaralPptpStatsMaxSessions | read-only | current | The maximum number of simultaneously active PPTP sessions since the system was booted. |
| 1.3.6.1.4.1.3076.2.1.2.3.1.11 | ScalaralPptpStatsControlRecvOctets | read-only | current | This object returns the number of control channel octets received. |
| 1.3.6.1.4.1.3076.2.1.2.3.1.12 | ScalaralPptpStatsControlRecvPackets | read-only | current | This object returns the number of control packets received. |
| 1.3.6.1.4.1.3076.2.1.2.3.1.13 | ScalaralPptpStatsControlRecvDiscards | read-only | current | This object returns the number of control packets received that were discarded. |
| 1.3.6.1.4.1.3076.2.1.2.3.1.14 | ScalaralPptpStatsControlSendOctets | read-only | current | This object returns the number of control channel octets that were transmitted to tunnel endpoints. |
| 1.3.6.1.4.1.3076.2.1.2.3.1.15 | ScalaralPptpStatsControlSendPackets | read-only | current | This object returns the number of control packets that were transmitted to tunnel endpoints. |
| 1.3.6.1.4.1.3076.2.1.2.3.1.16 | ScalaralPptpStatsPayloadRecvOctets | read-only | current | This object returns the number of payload channel octets that were received. |
| 1.3.6.1.4.1.3076.2.1.2.3.1.17 | ScalaralPptpStatsPayloadRecvPackets | read-only | current | This object returns the number of payload packets that were received. |
| 1.3.6.1.4.1.3076.2.1.2.3.1.18 | ScalaralPptpStatsPayloadRecvDiscards | read-only | current | This object returns the number of received payload packets that were discarded. |
| 1.3.6.1.4.1.3076.2.1.2.3.1.19 | ScalaralPptpStatsPayloadSendOctets | read-only | current | This object returns the number of payload channel octets that were transmitted to tunnel peers. |
| 1.3.6.1.4.1.3076.2.1.2.3.1.20 | ScalaralPptpStatsPayloadSendPackets | read-only | current | This object returns the number of payload packets that were transmitted to tunnel peers. |
| 1.3.6.1.4.1.3076.2.1.2.3.2 | TablealPptpStatsTunnelTable | not-accessible | current | The PPTP tunnel status and statistics table. |
| 1.3.6.1.4.1.3076.2.1.2.3.2.1 | RowalPptpStatsTunnelEntry | not-accessible | current | An entry in the alPptpStatsTunnelTable. |
| 1.3.6.1.4.1.3076.2.1.2.3.2.1.1 | ColumnalPptpStatsTunnelRowStatus | read-write | current | The status of this row. Used to terminate the tunnel, cannot be used to create a tunnel. |
| 1.3.6.1.4.1.3076.2.1.2.3.2.1.2 | ColumnalPptpStatsTunnelPeerIpAddr | read-only | current | The peer's IP address for this tunnel. |
| 1.3.6.1.4.1.3076.2.1.2.3.2.1.3 | ColumnalPptpStatsTunnelDatastreamId | read-only | current | The IP-GRE datastream ID of this tunnel. |
| 1.3.6.1.4.1.3076.2.1.2.3.2.1.4 | ColumnalPptpStatsTunnelLocalIpAddr | read-only | current | The local IP address for this tunnel. |
| 1.3.6.1.4.1.3076.2.1.2.3.2.1.5 | ColumnalPptpStatsTunnelPeerHostName | read-only | current | The peer's host name, as indicated by the peer in a Start-Control-Connection packet. |
| 1.3.6.1.4.1.3076.2.1.2.3.2.1.6 | ColumnalPptpStatsTunnelPeerVendorName | read-only | current | The peer's vendor name, as indicated by the peer in a Start-Control-Connection packet. |
| 1.3.6.1.4.1.3076.2.1.2.3.2.1.7 | ColumnalPptpStatsTunnelPeerFirmwareRev | read-only | current | This object contains the tunnel peer's firmware revision number. If the tunnel is idle this object should maintain its value from the last time it was connecte… |
| 1.3.6.1.4.1.3076.2.1.2.3.2.1.8 | ColumnalPptpStatsTunnelPeerProtVers | read-only | current | This object describes the protocol version and revision of the tunnel peers implementation. The first octet contains the protocol version. The second octet con… |
| 1.3.6.1.4.1.3076.2.1.2.3.2.1.9 | ColumnalPptpStatsTunnelPeerFramingCap | read-only | current | This object describes the Framing Capabilities of the tunnel peer. If the tunnel is idle this object should maintain its value from the last time it was connec… |
| 1.3.6.1.4.1.3076.2.1.2.3.2.1.10 | ColumnalPptpStatsTunnelPeerBearerCap | read-only | current | This object describes the Bearer Capabilities of the tunnel peer. If the tunnel is idle this object should maintain its value from the last time it was connect… |
| 1.3.6.1.4.1.3076.2.1.2.3.2.1.11 | ColumnalPptpStatsTunnelPeerMaxChan | read-only | current | The peer's maximum channels value, as indicated by the peer in a Start-Control-Connection packet. |
| 1.3.6.1.4.1.3076.2.1.2.3.2.1.12 | ColumnalPptpStatsTunnelActiveSessions | read-only | current | This object contains the total number of sessions for this tunnel. |
| 1.3.6.1.4.1.3076.2.1.2.3.3 | TablealPptpStatsSessionTable | not-accessible | current | List of active sessions within tunnels. |
| 1.3.6.1.4.1.3076.2.1.2.3.3.1 | RowalPptpStatsSessionEntry | not-accessible | current | An entry in the alPptpStatsSessionTable. |
| 1.3.6.1.4.1.3076.2.1.2.3.3.1.1 | ColumnalPptpStatsSessionRowStatus | read-write | current | The status of this row. Used to terminate the session, cannot be used to create a Session. |
| 1.3.6.1.4.1.3076.2.1.2.3.3.1.2 | ColumnalPptpStatsSessionDatastreamId | read-only | current | The GRE-PPP datastream ID of this tunnel, used as the index for this row. |
| 1.3.6.1.4.1.3076.2.1.2.3.3.1.3 | ColumnalPptpStatsSessionLocalCallId | read-only | current | The local call ID within the tunnel of the session represented by this row. |
| 1.3.6.1.4.1.3076.2.1.2.3.3.1.4 | ColumnalPptpStatsSessionPeerCallId | read-only | current | The peer call ID within the tunnel of the session represented by this row. |
| 1.3.6.1.4.1.3076.2.1.2.3.3.1.5 | ColumnalPptpStatsSessionUserName | read-only | current | This object identifies the peer session name on this interface. This is typically the login name of the remote user. If the user name is unknown to the local t… |
| 1.3.6.1.4.1.3076.2.1.2.3.3.1.6 | ColumnalPptpStatsSessionSerial | read-only | current | The call serial number within the tunnel of the session represented by this row. |
| 1.3.6.1.4.1.3076.2.1.2.3.3.1.7 | ColumnalPptpStatsSessionMinimumSpeed | read-only | current | The lowest acceptable line speed (in bits/second) for this session, as indicated in the Call-Request packet. |
| 1.3.6.1.4.1.3076.2.1.2.3.3.1.8 | ColumnalPptpStatsSessionMaximumSpeed | read-only | current | The highest acceptable line speed (in bits/second) for this session, as indicated in the Call-Request packet. |
| 1.3.6.1.4.1.3076.2.1.2.3.3.1.9 | ColumnalPptpStatsSessionConnectSpeed | read-only | current | The actual line speed (in bits/second) for this session. |
| 1.3.6.1.4.1.3076.2.1.2.3.3.1.10 | ColumnalPptpStatsSessionBearerType | read-only | current | A value indicating the bearer capability required for this session. |
| 1.3.6.1.4.1.3076.2.1.2.3.3.1.11 | ColumnalPptpStatsSessionFramingType | read-only | current | A value indicating the framing capability required for this session. |
| 1.3.6.1.4.1.3076.2.1.2.3.3.1.12 | ColumnalPptpStatsSessionPhysicalChannel | read-only | current | The physical channel number used for this session. |
| 1.3.6.1.4.1.3076.2.1.2.3.3.1.13 | ColumnalPptpStatsSessionLocalWindowSize | read-only | current | The number of received data packets this system will buffer for this session, as indicated in the setup packets for this session. |
| 1.3.6.1.4.1.3076.2.1.2.3.3.1.14 | ColumnalPptpStatsSessionPeerWindowSize | read-only | current | The number of received data packets the peer will buffer for this session, as indicated in the setup packets for this session. |
| 1.3.6.1.4.1.3076.2.1.2.3.3.1.15 | ColumnalPptpStatsSessionLocalPpd | read-only | current | A measure of the packet processing delay that might be imposed on data sent to this system, in units of 1/10 seconds. |
| 1.3.6.1.4.1.3076.2.1.2.3.3.1.16 | ColumnalPptpStatsSessionPeerPpd | read-only | current | A measure of the packet processing delay that might be imposed on data sent to the peer, in units of 1/10 seconds. |
| 1.3.6.1.4.1.3076.2.1.2.3.3.1.17 | ColumnalPptpStatsSessionRecvOctets | read-only | current | This object returns the total number payload octets received for this session. |
| 1.3.6.1.4.1.3076.2.1.2.3.3.1.18 | ColumnalPptpStatsSessionRecvPackets | read-only | current | This object returns the total number of payload packets received for this session. |
| 1.3.6.1.4.1.3076.2.1.2.3.3.1.19 | ColumnalPptpStatsSessionRecvDiscards | read-only | current | This object returns the total number of payload packets received that were discarded for this session. |
| 1.3.6.1.4.1.3076.2.1.2.3.3.1.20 | ColumnalPptpStatsSessionRecvZLB | read-only | current | This object returns the total number of Zero Length Body acknowlegement payload packets received for this session. |
| 1.3.6.1.4.1.3076.2.1.2.3.3.1.21 | ColumnalPptpStatsSessionSendOctets | read-only | current | This object returns the total number of payload octets transmitted for this session. |
| 1.3.6.1.4.1.3076.2.1.2.3.3.1.22 | ColumnalPptpStatsSessionSendPackets | read-only | current | This object returns the total number of payload packets transmitted for this session. |
| 1.3.6.1.4.1.3076.2.1.2.3.3.1.23 | ColumnalPptpStatsSessionSendZLB | read-only | current | This object returns the total number of Zero Length Body acknowledgement packets transmitted for this session. |
| 1.3.6.1.4.1.3076.2.1.2.3.3.1.24 | ColumnalPptpStatsSessionAckTimeouts | read-only | current | This object returns the total number of acknowledgement timeouts seen on payload packets for this session. |
| 1.3.6.1.4.1.3076.2.1.2.3.3.1.25 | ColumnalPptpStatsSessionLocalFlowOff | read-only | current | Indicates whether the session is in a locally flowed-off state because the number of outstanding unacknowledged packets received from the peer is equal to the … |
| 1.3.6.1.4.1.3076.2.1.2.3.3.1.26 | ColumnalPptpStatsSessionPeerFlowOff | read-only | current | Indicates whether the session peer is in a flowed-off state because the number of outstanding unacknowledged packets sent to the peer is equal to the peer's wi… |
| 1.3.6.1.4.1.3076.2.1.2.3.3.1.27 | ColumnalPptpStatsSessionOutOfWindow | read-only | current | The number of data packets received from the peer which were received outside of the offered receive window. |
| 1.3.6.1.4.1.3076.2.1.2.3.3.1.28 | ColumnalPptpStatsSessionOutOfSequence | read-only | current | The number of data packets that were not received in the correct order (as per the sequence number). |
| 1.3.6.1.4.1.3076.2.1.2.3.3.1.29 | ColumnalPptpStatsSessionTunnelPeerIpAddr | read-only | current | The peer's IP address for the tunnel over which this session is established. |