MIB Viewer

ALVARION-DOT11-WLAN-MIB

866 objects
BreezeAccess VL, BreezeACCESS 4900, BreezeNET-B and BreezeACCESS-Security
Imported Objects
SNMPv2-SMICounter32 enterprises Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32
OIDNameAccessStatusDescription
1.3.6.1.4.1.12394Nodealvarion
1.3.6.1.4.1.12394.1Nodeproducts
1.3.6.1.4.1.12394.1.1IdentitybreezeAccessVLMib4900BreezeAccess VL, BreezeACCESS 4900, BreezeNET-B and BreezeACCESS-Security
1.3.6.1.4.1.12394.1.1.1NodebrzaccVLSysInfo
1.3.6.1.4.1.12394.1.1.1.1ScalarbrzaccVLUnitHwVersionread-onlycurrentApplicable to all units. Hardware platform version.
1.3.6.1.4.1.12394.1.1.1.2ScalarbrzaccVLRunningSoftwareVersionread-onlycurrentApplicable to all units. Running software version.
1.3.6.1.4.1.12394.1.1.1.3ScalarbrzaccVLRunningFromread-onlycurrentApplicable to all units. The memory (main or shadow) from which the current version is running from.
1.3.6.1.4.1.12394.1.1.1.4ScalarbrzaccVLMainVersionNumberread-onlycurrentApplicable to all units. Main software version number.
1.3.6.1.4.1.12394.1.1.1.5ScalarbrzaccVLMainVersionFileNameread-onlycurrentApplicable to all units. Main software version file name.
1.3.6.1.4.1.12394.1.1.1.6ScalarbrzaccVLShadowVersionNumberread-onlycurrentApplicable to all units. Shadow software version number.
1.3.6.1.4.1.12394.1.1.1.7ScalarbrzaccVLShadowVersionFileNameread-onlycurrentApplicable to all units. Shadow software version file name.
1.3.6.1.4.1.12394.1.1.1.8ScalarbrzaccVLUnitMacAddressread-onlycurrentApplicable to all units. Unit hardware MAC address.
1.3.6.1.4.1.12394.1.1.1.9ScalarbrzaccVLUnitTyperead-onlycurrentApplicable to all units. auBS (1) : AU-BS (modular access unit). auSA (2) : AU-SA (stand-alone access unit). su-6-1D (3) : SU-6-1D (subscriber unit supporting …
1.3.6.1.4.1.12394.1.1.1.10ScalarbrzaccVLAssociatedAUread-onlycurrentApplicable to SU/RB only. Associated AU/BU MAC address.
1.3.6.1.4.1.12394.1.1.1.11ScalarbrzaccVLNumOfAssociationsSinceLastResetread-onlycurrentApplicable to all units. The number of associations since last reset, including duplicate associations (re-associations).
1.3.6.1.4.1.12394.1.1.1.13ScalarbrzaccVLCurrentNumOfAssociationsread-onlycurrentApplicable to AU only. Not applicable to BreezeNET-B products. The number of SUs currently associated with the AU. BreezeNET-B products return 65535.
1.3.6.1.4.1.12394.1.1.1.14ScalarbrzaccVLUnitBootVersionread-onlycurrentApplicable to all units. Boot version.
1.3.6.1.4.1.12394.1.1.1.15ScalarbrzaccVLRadioBandread-onlycurrentApplicable to all units. The unit's radio band.
1.3.6.1.4.1.12394.1.1.1.16ScalarbrzaccVLCurrentEthernetPortStateread-onlycurrentApplicable to all units. The current Ethernet port state.
1.3.6.1.4.1.12394.1.1.1.17ScalarbrzaccVLTimeSinceLastResetread-onlycurrentApplicable to all units. The elapsed time since last reset.
1.3.6.1.4.1.12394.1.1.1.18NodebrzaccVLCountryDependentParameters
1.3.6.1.4.1.12394.1.1.1.18.1ScalarbrzaccVLCountryCoderead-onlycurrentApplicable to all units. The country code and country name or country group name that is supported by the unit.
1.3.6.1.4.1.12394.1.1.1.18.2TablebrzaccVLCountryDependentParamsTablenot-accessiblecurrentApplicable to all units. A table of country dependent parameters.
1.3.6.1.4.1.12394.1.1.1.18.2.1RowbrzaccVLCountryDependentParameterEntrynot-accessiblecurrentApplicable to all units. An entry in the Country Dependent Parameters table.
1.3.6.1.4.1.12394.1.1.1.18.2.1.1ColumnbrzaccVLCountryDependentParameterTableIdxread-onlycurrentApplicable to all units. The sub-band ID of the entry in the Country Dependent Parameters table. Serves also as index for the table entry.
1.3.6.1.4.1.12394.1.1.1.18.2.1.2ColumnbrzaccVLCountryDependentParameterFrequenciesread-onlycurrentApplicable to all units. The frequencies included in the applicable sub-band entry.
1.3.6.1.4.1.12394.1.1.1.18.2.1.3ColumnbrzaccVLAllowedBandwidthread-onlycurrentApplicable to all units. The bandwidth when using the applicable the sub-band.
1.3.6.1.4.1.12394.1.1.1.18.2.1.4ColumnbrzaccVLRegulationMaxTxPowerAtAntennaPortread-onlycurrentApplicable to all units. The maximum allowed Tx power when using the applicable sub-band. A RegulationMaxTxPowerAtAntennaPort of 255, means no limit
1.3.6.1.4.1.12394.1.1.1.18.2.1.5ColumnbrzaccVLRegulationMaxEIRPread-onlycurrentApplicable to all units. The maximum Tx EIRP when using the applicable sub-band. A Regulation Max EIRP of 0, means no limit.
1.3.6.1.4.1.12394.1.1.1.18.2.1.6ColumnbrzaccVLMinModulationLevelread-onlycurrentApplicable to all units. The minimum supported modulation level.
1.3.6.1.4.1.12394.1.1.1.18.2.1.7ColumnbrzaccVLMaxModulationLevelread-onlycurrentApplicable to all units. The maximum supported modulation level.
1.3.6.1.4.1.12394.1.1.1.18.2.1.8ColumnbrzaccVLBurstModeSupportread-onlycurrentApplicable to all units. The supported Burst Mode Option.
1.3.6.1.4.1.12394.1.1.1.18.2.1.9ColumnbrzaccVLMaximumBurstDurationread-onlycurrentApplicable to all units. Applicable only if Burst Mode Option is supported. The maximum supported burst duration.
1.3.6.1.4.1.12394.1.1.1.18.2.1.10ColumnbrzaccVLDfsSupportread-onlycurrentApplicable to AU/BU only. The supported Dfs Option.
1.3.6.1.4.1.12394.1.1.1.18.2.1.11ColumnbrzaccVLMinimumHwRevisionread-onlycurrentApplicable to all units. The Minimum HW Revision needed to support the country code.
1.3.6.1.4.1.12394.1.1.1.18.3ScalarbrzaccVLAuthenticationEncryptionSupportread-onlycurrentApplicable to all units. The supported Authentication Encryption Option.
1.3.6.1.4.1.12394.1.1.1.18.4ScalarbrzaccVLDataEncryptionSupportread-onlycurrentApplicable to all units. The supported Data Encryption Option.
1.3.6.1.4.1.12394.1.1.1.18.5ScalarbrzaccVLAESEncryptionSupportread-onlycurrentApplicable to all units. The supported AES Encryption Option.
1.3.6.1.4.1.12394.1.1.1.19ScalarbrzaccVLAntennaGainChangeread-onlycurrentApplicable to all units. Indicates whether the Antenna Gain parameter is changeable or fixed.
1.3.6.1.4.1.12394.1.1.1.20ScalarbrzaccVLAteTestResultsread-onlycurrentApplicable to all units. Results of ATE Test
1.3.6.1.4.1.12394.1.1.1.21ScalarbrzaccVLSerialNumberread-onlycurrentApplicable to all units. Serial Number of the unit
1.3.6.1.4.1.12394.1.1.1.22ScalarbrzaccVLAUSSupportSU54read-onlycurrentApplicable to AU only. If the AU is not AUS, it will return 255. If the AUS is in 900 MHz bandwidth, it will return 255 Indicates if the AUS has license for as…
1.3.6.1.4.1.12394.1.1.1.23ScalarbrzaccVLNumOfRejectionsSinceLastResetread-onlycurrentApplicable to AU/BU only. The number of subscribers that were rejected because of wrong ESSID
1.3.6.1.4.1.12394.1.1.1.24ScalarbrzaccVLAUSSupportSU8read-onlycurrentApplicable to AU only. If the AU is not AUS, it will return 255. If the unit is AUS but not operating in 900 MHz, it will return 255. Indicates if the AUS has …
1.3.6.1.4.1.12394.1.1.2NodebrzaccVLUnitControl
1.3.6.1.4.1.12394.1.1.2.1ScalarbrzaccVLResetUnitread-writecurrentApplicable to all units. Resets the unit and applies new parameter values.
1.3.6.1.4.1.12394.1.1.2.2ScalarbrzaccVLSetDefaultsread-writecurrentApplicable to all units. Sets unit configuration to Defaults values after the next reset. noDefaultSettingRequested : Read-Only Option, no Default setting was …
1.3.6.1.4.1.12394.1.1.2.3ScalarbrzaccVLUnitNameread-writecurrentApplicable to all units. The unit name. A string of up to 32 printable ASCII characters.
1.3.6.1.4.1.12394.1.1.2.4ScalarbrzaccVLFlashMemoryControlread-writecurrentApplicable to all units. resetAndBootFromShadowVersion : Activates the backup version. useRunningVersionAfterReset : The currently active version will become t…
1.3.6.1.4.1.12394.1.1.2.5ScalarbrzaccVLTelnetLogoutTimerread-writecurrentApplicable to all units. Time-out of management via Telnet program. Automatic exit if the program is inactive for the defined time. Range: 1 to 999 (minutes).
1.3.6.1.4.1.12394.1.1.2.6ScalarbrzaccVLSaveCurrentConfigurationAsOperatorDefaultsread-writecurrentApplicable to all units. Saves the current configuration as Operator Defaults. Cannot be executed after requesting set defaults and the unit was not reset.
1.3.6.1.4.1.12394.1.1.2.7ScalarbrzaccVLExitTelnetread-writecurrentApplicable to all units. Exit the management via Telnet program.
1.3.6.1.4.1.12394.1.1.2.8NodebrzaccVLUnitPasswords
1.3.6.1.4.1.12394.1.1.2.8.1ScalarbrzaccVLReadOnlyPasswordread-writecurrentApplicable to all units. The User (read only) password. This is also the Read Community String. Up to 8 printable ASCII characters.
1.3.6.1.4.1.12394.1.1.2.8.2ScalarbrzaccVLInstallerPasswordread-writecurrentApplicable to all units. The Installer password. Up to 8 printable ASCII characters. Value read will allwais be *********
1.3.6.1.4.1.12394.1.1.2.8.3ScalarbrzaccVLAdminPasswordread-writecurrentApplicable to all units. The Administrator password. Value read will allwais be *********. Up to 8 printable ASCII characters.
1.3.6.1.4.1.12394.1.1.2.9ScalarbrzaccVLEthernetNegotiationModeread-writecurrentApplicable to all units. The speed/duplex mode of the Ethernet port.
1.3.6.1.4.1.12394.1.1.2.10NodebrzaccVLFTPParameters
1.3.6.1.4.1.12394.1.1.2.10.1NodebrzaccVLFTPServerParams
1.3.6.1.4.1.12394.1.1.2.10.1.1ScalarbrzaccVLFTPServerUserNameread-writecurrentApplicable to all units. The user name to be used for access to the FTP server. Accessible only with SNMP Write Community String (administrator password).
1.3.6.1.4.1.12394.1.1.2.10.1.2ScalarbrzaccVLFTPServerPasswordread-writecurrentApplicable to all units. The password to be used for access to the FTP server. Accessible only with SNMP Write Community String (administrator password).
1.3.6.1.4.1.12394.1.1.2.10.1.3ScalarbrzaccVLFTPClientIPAddressread-writecurrentApplicable to all units. For SW version higher than 4.0 this is read-only. The IP address of the FTP stack in the unit.
1.3.6.1.4.1.12394.1.1.2.10.1.4ScalarbrzaccVLFTPServerIpAddressread-writecurrentApplicable to all units. The IP address of the FTP server.
1.3.6.1.4.1.12394.1.1.2.10.1.5ScalarbrzaccVLFTPClientMaskread-writecurrentApplicable to all units. Starting with 5.0 this parameter is not appplicable. The Mask of the FTP stack in the unit.
1.3.6.1.4.1.12394.1.1.2.10.1.6ScalarbrzaccVLFTPGatewayIpAddressread-writecurrentApplicable to all units. Starting with 5.0 this parameter is not appplicable. The FTP Gateway address
1.3.6.1.4.1.12394.1.1.2.10.2NodebrzaccVLFTPSwDownload
1.3.6.1.4.1.12394.1.1.2.10.2.1ScalarbrzaccVLFTPSwFileNameread-writecurrentApplicable to all units. The name of the SW file to be downloaded.
1.3.6.1.4.1.12394.1.1.2.10.2.2ScalarbrzaccVLFTPSwSourceDirread-writecurrentApplicable to all units. The source directory of the required file in the FTP server. Up to 80 printable ASCII characters. Use dot (.) To clear field
1.3.6.1.4.1.12394.1.1.2.10.2.3ScalarbrzaccVLFTPDownloadSwFileread-writecurrentApplicable to all units. Execution of the SW download operation
1.3.6.1.4.1.12394.1.1.2.10.3NodebrzaccVLConfigurationFileLoading
1.3.6.1.4.1.12394.1.1.2.10.3.1ScalarbrzaccVLConfigurationFileNameread-writecurrentApplicable to all units. The name of the configuration file to be downloaded/uploaded.
1.3.6.1.4.1.12394.1.1.2.10.3.2ScalarbrzaccVLOperatorDefaultsFileNameread-writecurrentApplicable to all units. The name of the Operator Defaults file to be downloaded/uploaded
1.3.6.1.4.1.12394.1.1.2.10.3.3ScalarbrzaccVLFTPConfigurationFileSourceDirread-writecurrentApplicable to all units. The source directory of the required file in the FTP server. Up to 80 printable ASCII characters. Use dot (.) To clear field
1.3.6.1.4.1.12394.1.1.2.10.3.4ScalarbrzaccVLExecuteFTPConfigurationFileLoadingread-writecurrentApplicable to all units. Execution of the file download/upload operation.
1.3.6.1.4.1.12394.1.1.2.10.4NodebrzaccVLEventLogFileUploading
1.3.6.1.4.1.12394.1.1.2.10.4.1ScalarbrzaccVLEventLogFileNameread-writecurrentApplicable to all units. The name of the Event Log file to be uploaded.
1.3.6.1.4.1.12394.1.1.2.10.4.2ScalarbrzaccVLEventLogDestinationDirread-writecurrentApplicable to all units. The destination directory of the event log file. Up to 80 printable ASCII characters. Use dot (.) To clear field.
1.3.6.1.4.1.12394.1.1.2.10.4.3ScalarbrzaccVLUploadEventLogFileread-writecurrentApplicable to all units. Execution of the event log upload operation.
1.3.6.1.4.1.12394.1.1.2.11ScalarbrzaccVLLoadingStatusread-onlycurrentApplicable to all units. The status of the last loading operation.
1.3.6.1.4.1.12394.1.1.2.12NodebrzaccVLEventLogFileParams
1.3.6.1.4.1.12394.1.1.2.12.1ScalarbrzaccVLEventLogPolicyread-writecurrentApplicable to all units. The lowest level event to be registered in the event log.
1.3.6.1.4.1.12394.1.1.2.12.2ScalarbrzaccVLEraseEventLogread-writecurrentApplicable to all units. Erase the event log.
1.3.6.1.4.1.12394.1.1.2.13ScalarbrzaccVLSystemLocationread-writecurrentApplicable to all units. The unit location.
1.3.6.1.4.1.12394.1.1.2.14NodebrzaccVLFeatureUpgrade
1.3.6.1.4.1.12394.1.1.2.14.1ScalarbrzaccVLFeatureUpgradeManuallyread-writecurrentApplicable to all units. Upgrade unit to support new feature. Enter your license number (32 to 64 hex digits).
1.3.6.1.4.1.12394.1.1.2.15ScalarbrzaccVLChangeUnitTyperead-writecurrentApplicable RB/BU only. Change the unit type between BU and RB.
1.3.6.1.4.1.12394.1.1.2.16ScalarbrzaccVLApWorkingModeread-onlycurrentApplicable to AU-EZ only. Starting with 5.5 it is read-only. Report unit running mode: 1 - EZ mode.
1.3.6.1.4.1.12394.1.1.2.17NodebrzaccVLLEDsettings
1.3.6.1.4.1.12394.1.1.2.17.1ScalarbrzaccVLLEDmoderead-writecurrentApplicable to all units with SW version 6.0 and higher, except AU. Sets the operating mode of the unit LEDS
1.3.6.1.4.1.12394.1.1.2.17.2TablebrzaccVLThresholdTablenot-accessiblecurrentApplicable to all units with SW version 6.0 and higher, except AU. A table with the settings for Threshold mode
1.3.6.1.4.1.12394.1.1.2.17.2.1RowbrzaccVLThresholdTableEntrynot-accessiblecurrentApplicable to all units with SW version 6.0 and higher, except AU. An entry in the ThresholdTable.
1.3.6.1.4.1.12394.1.1.2.17.2.1.1ColumnbrzaccVLThresholdLEDnumread-onlycurrentApplicable to all units with SW version 6.0 and higher, except AU. The LED position and index.
1.3.6.1.4.1.12394.1.1.2.17.2.1.2ColumnbrzaccVLThresholdLEDtyperead-writecurrentApplicable to all units with SW version 6.0 and higher, except AU. The type of measurement of the LED
1.3.6.1.4.1.12394.1.1.2.17.2.1.3ColumnbrzaccVLThresholdLEDmoderead-writecurrentApplicable to all units with SW version 6.0 and higher, except AU. The condition to turn the LED on.
1.3.6.1.4.1.12394.1.1.2.17.2.1.4ColumnbrzaccVLThresholdLEDtargetread-writecurrentApplicable to all units with SW version 6.0 and higher, except AU. The target value, depending on LED type, from brzaccVLThresholdLEDtype above.
1.3.6.1.4.1.12394.1.1.3NodebrzaccVLNwMngParameters
1.3.6.1.4.1.12394.1.1.3.1ScalarbrzaccVLAccessToNwMngread-writecurrentApplicable to all units. The port to be used for remote management.
1.3.6.1.4.1.12394.1.1.3.2ScalarbrzaccVLNwMngFilterread-writecurrentApplicable to all units. Disables or enable on one of the ports, or on both ports, IP address based filtering of management messages (e.g. SNMP , Telnet , TFTP…
1.3.6.1.4.1.12394.1.1.3.3TablemngIpFilterTablenot-accessiblecurrentStarting with version 5.0, this is deprecated. Use newMngIpFilterTable instead. Applicable to all units. A Management IP Filter Table of up to 3 IP addresses o…
1.3.6.1.4.1.12394.1.1.3.3.1RowmngIpFilterEntrynot-accessiblecurrentApplicable to all units. A Management IP Filter Table entry.
1.3.6.1.4.1.12394.1.1.3.3.1.1ColumnbrzaccVLNwMngIpAddressread-writecurrentApplicable to all units. An IP address in the Management IP Filter Table.
1.3.6.1.4.1.12394.1.1.3.3.1.2ColumnbrzaccVLNwMngIpTableIdxread-onlycurrentApplicable to all units. A table index for an entry in the Management IP Filter Table.
1.3.6.1.4.1.12394.1.1.3.4ScalarbrzaccVLDeleteOneNwIpAddrread-writecurrentApplicable to all units. 0 - cancel operation. 1..10 - Deletes a single selected entry from the Management IP Filter Table.
1.3.6.1.4.1.12394.1.1.3.5ScalarbrzaccVLDeleteAllNwIpAddrsread-writecurrentApplicable to all units. Deletes all entries from the Management IP Filter Table.
1.3.6.1.4.1.12394.1.1.3.6ScalarbrzaccVLAccessToNwTrapread-writecurrentApplicable to all units. Enables or disables sending of traps.
1.3.6.1.4.1.12394.1.1.3.7TablemngTrapTablenot-accessiblecurrentStarting with version 5.0, this is deprecated. Use newMngTrapTable instead. Applicable to all units. A Management Trap Table of up to 10 IP addresses of statio…
1.3.6.1.4.1.12394.1.1.3.7.1RowmngTrapEntrynot-accessiblecurrentApplicable to all units. A Management Trap Table entry.
1.3.6.1.4.1.12394.1.1.3.7.1.1ColumnbrzaccVLNwMngTrapCommunityread-writecurrentApplicable to all units. The trap community associated with the applicable entry in the Management Trap Table. Up to 14 printable case sensitive ASCII characte…
1.3.6.1.4.1.12394.1.1.3.7.1.2ColumnbrzaccVLNwMngTrapAddressread-writecurrentApplicable to all units. An IP address in the Management Trap Table entry.
1.3.6.1.4.1.12394.1.1.3.7.1.3ColumnbrzaccVLNwTrapTableIdxread-onlycurrentApplicable to all units. Tables Index for an entry in the Management Trap Table.
1.3.6.1.4.1.12394.1.1.3.8ScalarbrzaccVLDeleteOneTrapAddrread-writecurrentApplicable to all units. 0 - cancel operation. 1..10 - Deletes a single selected entry from the Management Trap Table.
1.3.6.1.4.1.12394.1.1.3.9ScalarbrzaccVLDeleteAllTrapAddrsread-writecurrentApplicable to all units. Deletes all entries from the Management Trap Table.
1.3.6.1.4.1.12394.1.1.3.10TablebrzaccVLMngIpRangesTablenot-accessiblecurrentStarting with version 5.0, this is deprecated. Use brzaccVLNewMngIpRangesTable instead. Applicable to all units. Table of Management IP Address Ranges
1.3.6.1.4.1.12394.1.1.3.10.1RowbrzaccVLMngIpRangeEntrynot-accessiblecurrentApplicable to all units. A Management IP Address Ranges Table entry
1.3.6.1.4.1.12394.1.1.3.10.1.1ColumnbrzaccVLMngIpRangeIdxread-onlycurrentApplicable to all units. Index of an entry in the Management IP Address Ranges Table
1.3.6.1.4.1.12394.1.1.3.10.1.2ColumnbrzaccVLMngIpRangeFlagread-writecurrentApplicable to all units. Defines the method of defining the range: Using Start & End Address( rangeDefinedByStartEndAddr ), or using Start Address and Mask ( r…
1.3.6.1.4.1.12394.1.1.3.10.1.3ColumnbrzaccVLMngIpRangeStartread-writecurrentApplicable to all units. Start Address of the range
1.3.6.1.4.1.12394.1.1.3.10.1.4ColumnbrzaccVLMngIpRangeEndread-writecurrentApplicable to all units. End Address of the range. Used only if brzaccVLMngIpRangeFlag is rangeDefinedByStartEndAddr
1.3.6.1.4.1.12394.1.1.3.10.1.5ColumnbrzaccVLMngIpRangeMaskread-writecurrentApplicable to all units. End Address of the range. Used only if brzaccVLMngIpRangeFlag is rangeDefinedByStartAddrMask
1.3.6.1.4.1.12394.1.1.3.11ScalarbrzaccVLDeleteOneNwIpRangeread-writecurrentApplicable to all units. 0 - cancel operation. 1..10 - Deletes a single selected entry from the Management IP Ranges Table.
1.3.6.1.4.1.12394.1.1.3.12ScalarbrzaccVLDeleteAllNwIpRangesread-writecurrentApplicable to all units. Deletes all entries from the Management IP Ranges Table.
1.3.6.1.4.1.12394.1.1.3.13ScalarbrzaccVLWi2IpAddressread-writecurrentApplicable to SU/RB unit only. The IP Address of the WIFI WIMAX unit
1.3.6.1.4.1.12394.1.1.3.14NodebrzaccVLNewNMngSystem
1.3.6.1.4.1.12394.1.1.3.14.1NodebrzaccVLErrorHandling
1.3.6.1.4.1.12394.1.1.3.14.1.1ScalarbrzaccVLErrHandlingSetNMSIdread-writecurrentApplicable to all units. The ID of the Network Management System that use Error Handling mechanism. Get request will return 0.
1.3.6.1.4.1.12394.1.1.3.14.1.2TablebrzaccVLErrHandlingTablenot-accessiblecurrent
1.3.6.1.4.1.12394.1.1.3.14.1.2.1RowbrzaccVLErrHandlingEntrynot-accessiblecurrent
1.3.6.1.4.1.12394.1.1.3.14.1.2.1.1ColumnbrzaccVLErrHandlingNMSIdread-onlycurrent
1.3.6.1.4.1.12394.1.1.3.14.1.2.1.2ColumnbrzaccVLErrHandlingRequestIdread-onlycurrent
1.3.6.1.4.1.12394.1.1.3.14.1.2.1.3ColumnbrzaccVLErrHandlingErrorCoderead-onlycurrent
1.3.6.1.4.1.12394.1.1.3.14.1.2.1.4ColumnbrzaccVLErrHandlingParameter1read-onlycurrent
1.3.6.1.4.1.12394.1.1.3.14.1.2.1.5ColumnbrzaccVLErrHandlingParameter2read-onlycurrent
1.3.6.1.4.1.12394.1.1.3.14.1.2.1.6ColumnbrzaccVLErrHandlingParameter3read-onlycurrent
1.3.6.1.4.1.12394.1.1.3.14.1.2.1.7ColumnbrzaccVLErrHandlingParameter4read-onlycurrent
1.3.6.1.4.1.12394.1.1.3.14.1.2.1.8ColumnbrzaccVLErrHandlingParameter5read-onlycurrent
1.3.6.1.4.1.12394.1.1.3.14.2NodebrzaccVLTrapHistory
1.3.6.1.4.1.12394.1.1.3.14.2.1ScalarbrzaccVLLastTrapSequenceNumberread-onlycurrentApplicable to AU/BU only. Sequence Number of Last generated Trap
1.3.6.1.4.1.12394.1.1.3.14.2.2TablebrzaccVLTrapHistoryTablenot-accessiblecurrentApplicable to AU/BU only. This table contains the last 1024 traps generated by the unit.
1.3.6.1.4.1.12394.1.1.3.14.2.2.1RowbrzaccVLTrapHistoryEntrynot-accessiblecurrentApplicable to AU/BU only. An entry in Trap History Table.
1.3.6.1.4.1.12394.1.1.3.14.2.2.1.1ColumnbrzaccVLTrapHistorySequenceNumberread-onlycurrentApplicable to AU/BU only. Sequence number of the trap.
1.3.6.1.4.1.12394.1.1.3.14.2.2.1.2ColumnbrzaccVLTrapTyperead-onlycurrentApplicable to AU/BU only. It contains the trap type.
1.3.6.1.4.1.12394.1.1.3.14.2.2.1.3ColumnbrzaccVLTrapMacAddrParamread-onlycurrentApplicable to AU/BU only. It contains the MAC Address of the trap if the trap type requires this field, otherwise it contains the NULL MAC Address.
1.3.6.1.4.1.12394.1.1.3.14.2.2.1.4ColumnbrzaccVLTrapIntParam1read-onlycurrentApplicable to AU/BU only. It contains the first variable of integer type for the trap. If from the trap definition this variable is not applicable it will be 0.
1.3.6.1.4.1.12394.1.1.3.14.2.2.1.5ColumnbrzaccVLTrapIntParam2read-onlycurrentApplicable to AU/BU only. It contains the second variable of integer type for the trap. If from the trap definition this variable is not applicable it will be …
1.3.6.1.4.1.12394.1.1.3.14.2.2.1.6ColumnbrzaccVLTrapIntParam3read-onlycurrentApplicable to AU/BU only. It contains the third variable of integer type for the trap. If from the trap definition this variable is not applicable it will be 0.
1.3.6.1.4.1.12394.1.1.3.14.2.2.1.7ColumnbrzaccVLTrapStrParamread-onlycurrentApplicable to AU/BU only. It contains the string variable of the trap if this variable exists for that trap, otherwise it will contain the empty string.
1.3.6.1.4.1.12394.1.1.3.15TablenewMngIpFilterTablenot-accessiblecurrentApplicable to all units. A Management IP Filter Table of up to 10 IP addresses of devices that are authorized to access the unit for management purposes.
1.3.6.1.4.1.12394.1.1.3.15.1RownewMngIpFilterEntrynot-accessiblecurrentApplicable to all units. A Management IP Filter Table entry.
1.3.6.1.4.1.12394.1.1.3.15.1.1ColumnbrzaccVLNewNwMngIpAddressread-onlycurrentApplicable to all units. An IP address in the Management IP Filter Table.
1.3.6.1.4.1.12394.1.1.3.15.1.2ColumnbrzaccVLNewNwMngIpAddressCommandread-writecurrentApplicable to all units. Supports only active(1), createAndGo(4) and destroy(6). A command for an entry in the Management IP Filter Table.
1.3.6.1.4.1.12394.1.1.3.16TablenewMngTrapTablenot-accessiblecurrentApplicable to all units. A Management Trap Table of up to 10 IP addresses of stations to send traps to.
1.3.6.1.4.1.12394.1.1.3.16.1RownewMngTrapEntrynot-accessiblecurrentApplicable to all units. A Management Trap Table entry.
1.3.6.1.4.1.12394.1.1.3.16.1.1ColumnbrzaccVLNewNwMngTrapCommunityread-writecurrentApplicable to all units. The trap community associated with the applicable entry in the Management Trap Table. Up to 14 printable case sensitive ASCII characte…
1.3.6.1.4.1.12394.1.1.3.16.1.2ColumnbrzaccVLNewNwMngTrapAddressread-onlycurrentApplicable to all units. An IP address in the Management Trap Table entry.
1.3.6.1.4.1.12394.1.1.3.16.1.3ColumnbrzaccVLNewNwTrapCommandread-writecurrentApplicable to all units. Supports only active(1), createAndGo(4) and destroy(6). A command for an entry in the Management Trap Table.
1.3.6.1.4.1.12394.1.1.3.17TablebrzaccVLNewMngIpRangesTablenot-accessiblecurrentApplicable to all units. Table of Management IP Address Ranges
1.3.6.1.4.1.12394.1.1.3.17.1RowbrzaccVLNewMngIpRangeEntrynot-accessiblecurrentApplicable to all units. A Management IP Address Ranges Table entry
1.3.6.1.4.1.12394.1.1.3.17.1.1ColumnbrzaccVLNewMngIpRangeStartread-onlycurrentApplicable to all units. Start Address of the range
1.3.6.1.4.1.12394.1.1.3.17.1.2ColumnbrzaccVLNewMngIpRangeEndread-writecurrentApplicable to all units. End Address of the range. Used only if brzaccVLMngIpRangeFlag is rangeDefinedByStartEndAddr
1.3.6.1.4.1.12394.1.1.3.17.1.3ColumnbrzaccVLNewMngIpRangeMaskread-writecurrentApplicable to all units. End Address of the range. Used only if brzaccVLMngIpRangeFlag is rangeDefinedByStartAddrMask
1.3.6.1.4.1.12394.1.1.3.17.1.4ColumnbrzaccVLNewMngIpRangeFlagread-writecurrentApplicable to all units. Defines the method of defining the range: Using Start & End Address( rangeDefinedByStartEndAddr ), or using Start Address and Mask ( r…
1.3.6.1.4.1.12394.1.1.3.17.1.5ColumnbrzaccVLNewMngIpRangeCommandread-writecurrentApplicable to all units. Row Status in the New Management IP Address Ranges Table
1.3.6.1.4.1.12394.1.1.4NodebrzaccVLIpParams
1.3.6.1.4.1.12394.1.1.4.1ScalarbrzaccVLUnitIpAddressread-writecurrentApplicable to all units. IP address of the unit.
1.3.6.1.4.1.12394.1.1.4.2ScalarbrzaccVLSubNetMaskread-writecurrentApplicable to all units. Subnet mask of the unit.
1.3.6.1.4.1.12394.1.1.4.3ScalarbrzaccVLDefaultGWAddressread-writecurrentApplicable to all units. Default gateway IP address of the unit.
1.3.6.1.4.1.12394.1.1.4.4ScalarbrzaccVLUseDhcpread-writecurrentApplicable to all units. DHCP client mode of operation. disabled : Use regular (manual) methods to configure IP parameters. dHCP Only: Use DHCP server to confi…
1.3.6.1.4.1.12394.1.1.4.5ScalarbrzaccVLAccessToDHCPread-writecurrentApplicable to all units. The port to be used for communicating with a DHCP server.
1.3.6.1.4.1.12394.1.1.4.6ScalarbrzaccVLRunTimeIPaddrread-onlycurrentApplicable to all units. The run-time IP address. If DHCP is used the Run Time IP Address is the address given to the unit by the server. Otherwise it is the m…
1.3.6.1.4.1.12394.1.1.4.7ScalarbrzaccVLRunTimeSubNetMaskread-onlycurrentApplicable to all units. The run-time Subnet Mask. If DHCP is used the Run Time Subnet Mask is the mask given to the unit by the server. Otherwise it is the ma…
1.3.6.1.4.1.12394.1.1.4.8ScalarbrzaccVLRunTimeDefaultIPGatewayread-onlycurrentApplicable to all units. The run-time Gateway IP address. If DHCP is used the Run Time Gateway IP Address is the address given to the unit by the server. Other…
1.3.6.1.4.1.12394.1.1.5NodebrzaccVLBridgeParameters
1.3.6.1.4.1.12394.1.1.5.1NodebrzaccVLVLANSupport
1.3.6.1.4.1.12394.1.1.5.1.1ScalarbrzaccVLVlanIDread-writecurrentApplicable to SU/RB only. VLAN ID for data frame tagging. Applicable to Access Link only. Range: 1 to 4094. 0 - not applicable.
1.3.6.1.4.1.12394.1.1.5.1.2ScalarbrzaccVLEthernetLinkTyperead-writecurrentApplicable to all units. VLAN support mode (Link Type). The Access Link, Extended Access Link and Extended Trunk Link options are not available for AU/BU. Serv…
1.3.6.1.4.1.12394.1.1.5.1.3ScalarbrzaccVLManagementVlanIDread-writecurrentApplicable to all units. VLAN ID for management frame tagging. Range: 1 to 4094, 65535 for No VLAN tagging.
1.3.6.1.4.1.12394.1.1.5.1.4NodebrzaccVLVLANForwarding
1.3.6.1.4.1.12394.1.1.5.1.4.1ScalarbrzaccVLVlanForwardingSupportread-writecurrentApplicable to all units. Enables or disables the VLAN forwarding feature. (applicable in Trunk and Service Provider links only).
1.3.6.1.4.1.12394.1.1.5.1.4.2TablebrzaccVLVlanForwardingTablenot-accessiblecurrentStarting with version 5.0, this is deprecated. Use brzaccVLNewVlanForwardingTable instead. Applicable to all units. A VLAN Forwarding Table of up to 20 VLAN ID…
1.3.6.1.4.1.12394.1.1.5.1.4.2.1RowbrzaccVLVlanForwardingEntrynot-accessiblecurrentApplicable to all units. A VLAN Forwarding Table entry. (applicable in Trunk and Service Provider links only).
1.3.6.1.4.1.12394.1.1.5.1.4.2.1.1ColumnbrzaccVLVlanForwardingTableIdxread-onlycurrentApplicable to all units. A read only table index for a VLAN entry in the VLAN Forwarding Table.
1.3.6.1.4.1.12394.1.1.5.1.4.2.1.2ColumnbrzaccVLVlanIdForwardingread-writecurrentApplicable to all units. The list of VLAN ID's in the VLAN ID Forwarding Table. To Remove a VLAN ID - SET the corresponding entry to 0. To Add a new VLAN ID SE…
1.3.6.1.4.1.12394.1.1.5.1.4.3TablebrzaccVLNewVlanForwardingTablenot-accessiblecurrentApplicable to all units. A VLAN Forwarding Table of up to 20 VLAN IDs of devices to which data frames are forwarded when VLAN Forwarding is Enabled. (applicabl…
1.3.6.1.4.1.12394.1.1.5.1.4.3.1RowbrzaccVLNewVlanForwardingEntrynot-accessiblecurrentApplicable to all units. A VLAN Forwarding Table entry. (applicable in Trunk and Service Provider links only).
1.3.6.1.4.1.12394.1.1.5.1.4.3.1.1ColumnbrzaccVLNewVlanIdForwardingread-onlycurrentApplicable to all units. The list of VLAN ID's in the VLAN ID Forwarding Table. Range : 1 to 4094
1.3.6.1.4.1.12394.1.1.5.1.4.3.1.2ColumnbrzaccVLNewVlanForwardingCommandread-writecurrentApplicable to all units. Row Status in the New VLAN Forwarding Table.
1.3.6.1.4.1.12394.1.1.5.1.5NodebrzaccVLVlanRelaying
1.3.6.1.4.1.12394.1.1.5.1.5.1ScalarbrzaccVLVlanRelayingSupportread-writecurrentApplicable to AU only. Not applicable to BreezeNET-B products. Enables or disables VLAN Relaying (applicable in Trunk and Service Provider links only).
1.3.6.1.4.1.12394.1.1.5.1.5.2TablebrzaccVLVlanRelayingTablenot-accessiblecurrentStarting with version 5.0, this is deprecated. Use brzaccVLNewVlanRelayingTable instead. Applicable to AU only. Not applicable to BreezeNET-B products. A VLAN …
1.3.6.1.4.1.12394.1.1.5.1.5.2.1RowbrzaccVLVlanRelayingEntrynot-accessiblecurrentApplicable to AU only. Not applicable to BreezeNET-B products. A VLAN Relaying Table entry. (applicable in Trunk and Service Provider links only).
1.3.6.1.4.1.12394.1.1.5.1.5.2.1.1ColumnbrzaccVLVlanRelayingTableIdxread-onlycurrentApplicable to AU only. Not applicable to BreezeNET-B products. A table index for a VLAN entry in the VLAN Relaying Table.
1.3.6.1.4.1.12394.1.1.5.1.5.2.1.2ColumnbrzaccVLVlanIdRelayingread-writecurrentApplicable to AU only. Not applicable to BreezeNET-B products. The list of VLAN ID's in the VLAN ID Relaying Table. To Remove a VLAN ID - SET the corresponding…
1.3.6.1.4.1.12394.1.1.5.1.5.3TablebrzaccVLNewVlanRelayingTablenot-accessiblecurrentApplicable to AU only. Not applicable to BreezeNET-B products. A VLAN Relaying Table of up to 20 VLAN IDs of devices to which data frames are relayed when VLAN…
1.3.6.1.4.1.12394.1.1.5.1.5.3.1RowbrzaccVLNewVlanRelayingEntrynot-accessiblecurrentApplicable to AU only. Not applicable to BreezeNET-B products. A VLAN Relaying Table entry. (applicable in Trunk and Service Provider links only).
1.3.6.1.4.1.12394.1.1.5.1.5.3.1.1ColumnbrzaccVLNewVlanIdRelayingread-onlycurrentApplicable to AU only. Not applicable to BreezeNET-B products. The list of VLAN ID's in the VLAN ID Relaying Table. Range: 1 to 4094.
1.3.6.1.4.1.12394.1.1.5.1.5.3.1.2ColumnbrzaccVLNewVlanRelayingTableCommandread-writecurrentApplicable to AU only. Not applicable to BreezeNET-B products. Supports only active(1), createAndGo(4) and destroy(6). A command to create or destroy a VLAN en…
1.3.6.1.4.1.12394.1.1.5.1.6NodebrzaccVLVLANTrafficPriority
1.3.6.1.4.1.12394.1.1.5.1.6.1ScalarbrzaccVLVlanDataPriorityread-writecurrentApplicable to SU/RB only. Priority tagging for data frames. Applicable to Access Link only. Range: 0 to 7.
1.3.6.1.4.1.12394.1.1.5.1.6.2ScalarbrzaccVLVlanManagementPriorityread-writecurrentApplicable to all units. Priority tagging for management frames. Range: 0 to 7.
1.3.6.1.4.1.12394.1.1.5.1.6.3ScalarbrzaccVLVlanPriorityThresholdread-writecurrentApplicable to all units. Not applicable to units with SW version 3.1 or higher. Priority threshold for tagged frames received from Ethernet port. Applicable to…
1.3.6.1.4.1.12394.1.1.5.1.7NodebrzaccVLVLANQinQ
1.3.6.1.4.1.12394.1.1.5.1.7.1ScalarbrzaccVLQinQEthertyperead-writecurrentApplicable to AU and SU. Not applicable to BreezeNET-B units. The Ethernet type of the Service Provider Tag. The range is 0x8100(33024) - 0x9000(36864), 0x9100…
1.3.6.1.4.1.12394.1.1.5.1.7.2ScalarbrzaccVLQinQProviderVlanIDread-writecurrentApplicable to SU only. VLAN ID of the Service Provider Tag.
1.3.6.1.4.1.12394.1.1.5.1.8TablebrzaccVLVlanExtendedAccessRulesTablenot-accessiblecurrentStarting with version 6.0. Available for SU/RB units only. An 8-VLAN Rule Table for Extended Access Link.
1.3.6.1.4.1.12394.1.1.5.1.8.1RowbrzaccVLVlanExtendedAccessRulesEntrynot-accessiblecurrentStarting with version 6.0. Available for SU/RB units only. An entry in VLAN Rule Table for Extended Access Link.
1.3.6.1.4.1.12394.1.1.5.1.8.1.1ColumnbrzaccVLVlanExtendedAccessRulesTableIdxread-onlycurrentStarting with version 6.0. Available for SU/RB units only. A table index for a VLAN Rule entry/rule in the VLAN Rule Table for Extended Access Link.
1.3.6.1.4.1.12394.1.1.5.1.8.1.2ColumnbrzaccVLVlanExtendedAccessRuleIdread-writecurrentStarting with version 6.0. Available for SU/RB units only. Identifies the VLAN Rule type of an entry/rule, in VLAN Rule Table for Extended Access Link.
1.3.6.1.4.1.12394.1.1.5.1.8.1.3ColumnbrzaccVLVlanExtendedAccessRuleVlanIdread-writecurrentStarting with version 6.0. Available for SU/RB units only. Identifies the data VLAN ID of an entry/rule, in VLAN Rule Table for Extended Access Link. Range: 1-…
1.3.6.1.4.1.12394.1.1.5.1.8.1.4ColumnbrzaccVLVlanExtendedAccessRulePriorityread-writecurrentStarting with version 6.0. Applicable to SU/RB units only. Identifies the Priority tagging for data frames, for an entry/rule, in VLAN Rule Table for Extended …
1.3.6.1.4.1.12394.1.1.5.1.8.1.5ColumnbrzaccVLVlanExtendedAccessRuleMulticastAllowedread-writecurrentStarting with version 6.0. Available for SU/RB units only. Determine if Multicast frames are tagged and sent on wireless LAN. Option for an entry/rule, in VLAN…
1.3.6.1.4.1.12394.1.1.5.1.8.1.6ColumnbrzaccVLVlanExtendedAccessRuleOpTyperead-writecurrentStarting with version 6.0. Available for SU/RB units only. Identifies the VLAN Operand type of an entry/rule, in VLAN Rule Table for Extended Access Link. Rang…
1.3.6.1.4.1.12394.1.1.5.1.8.1.7ColumnbrzaccVLVlanExtendedAccessRuleOperandsread-writecurrentStarting with version 6.0. Available for SU/RB units only. The VLAN Operand list of an entry/rule, in VLAN Rule Table for Extended Access Link. Operand list ma…
1.3.6.1.4.1.12394.1.1.5.1.9ScalarbrzaccVLVlanExtendedTrunkVlanIDread-writecurrentStarting with version 6.0. Available for SU/RB units only. Native VLAN ID value, for Extended Trunk Link.
1.3.6.1.4.1.12394.1.1.5.2ScalarbrzaccVLBridgeAgingTimeread-writecurrentApplicable to all units. Bridge aging time for devices on both the Ethernet and wireless link sides. Range: 20 to 2000 seconds.
1.3.6.1.4.1.12394.1.1.5.4ScalarbrzaccVLBroadcastRelayingread-writecurrentApplicable to AU only. Not applicable to BreezeNET-B products. Enables/disables the relaying of broadcast messages to the wireless link.
1.3.6.1.4.1.12394.1.1.5.5ScalarbrzaccVLUnicastRelayingread-writecurrentApplicable to AU only. Not applicable to BreezeNET-B products. Enables/disables the relaying of unicast messages to the wireless link.
1.3.6.1.4.1.12394.1.1.5.6ScalarbrzaccVLEthBroadcastFilteringread-writecurrentApplicable to SU/RB only. Enables/disables the filtering of Ethernet (layer2) broadcasts. disable : No filtering. onEthernetOnly : Filters broadcasts received …
1.3.6.1.4.1.12394.1.1.5.7NodebrzaccVLEthBroadcastingParameters
1.3.6.1.4.1.12394.1.1.5.7.1ScalarbrzaccVLDHCPBroadcastOverrideFilterread-writecurrentApplicable to SU/RB only. Enables or disables the broadcasting of DHCP messages, overriding the general *brzaccVLEthBroadcastFiltering Ethernet broadcast filte…
1.3.6.1.4.1.12394.1.1.5.7.2ScalarbrzaccVLPPPoEBroadcastOverrideFilterread-writecurrentApplicable to SU/RB only. Enables or disables the broadcasting of PPPoE messages, overriding the general *brzaccVLEthBroadcastFiltering Ethernet broadcast filt…
1.3.6.1.4.1.12394.1.1.5.7.3ScalarbrzaccVLARPBroadcastOverrideFilterread-writecurrentApplicable to SU/RB only. Enables or disables the broadcasting of ARP messages, overriding the general *brzaccVLEthBroadcastFiltering Ethernet broadcast filter…
1.3.6.1.4.1.12394.1.1.5.7.4ScalarbrzaccVLEthBroadcastMulticastLimiterOptionread-writecurrentApplicable to all units. Enable/disable the limiter for multicast and broadcast packets.
1.3.6.1.4.1.12394.1.1.5.7.5ScalarbrzaccVLEthBroadcastMulticastLimiterThresholdread-writecurrentApplicable to all units. The limit on the number of multicast and broadcast packets when the Ethernet Broadcast/Multicast Limiter Option is enabled. Range: 0 t…
1.3.6.1.4.1.12394.1.1.5.7.6ScalarbrzaccVLEthBroadcastMulticastLimiterSendTrapIntervalread-writecurrentApplicable to all units. The minimum time between two successive traps that are sent indicating the number of packets that were dropped by the Ethernet Broadca…
1.3.6.1.4.1.12394.1.1.5.8NodebrzaccVLToSPriorityParameters
1.3.6.1.4.1.12394.1.1.5.8.1ScalarbrzaccVLToSPrecedenceThresholdread-writecurrentApplicable to all units. Not applicable to units with SW version 3.1 or higher. Priority threshold (based on the ToS) for frames received from the Ethernet por…
1.3.6.1.4.1.12394.1.1.5.9ScalarbrzaccVLRoamingOptionread-writecurrentApplicable to SU/RB only. Disable/enable the roaming feature. When enabled, the SU/RB will start scanning for an AU/BU after about one second of not receiving …
1.3.6.1.4.1.12394.1.1.5.10NodebrzaccVLMacAddressDenyList
1.3.6.1.4.1.12394.1.1.5.10.1TablebrzaccVLMacAddressDenyListTablenot-accessiblecurrentStarting with version 5.0, this is deprecated. Use brzaccVLNewMacAddressDenyListTable instead. Applicable to AU only. Not applicable to BreezeNET-B units. A li…
1.3.6.1.4.1.12394.1.1.5.10.1.1RowbrzaccVLMacAddressDenyListEntrynot-accessiblecurrentApplicable to AU only. Not applicable to BreezeNET-B units. An entry in the Mac Address Deny List Table.
1.3.6.1.4.1.12394.1.1.5.10.1.1.1ColumnbrzaccVLMacAddressDenyListTableIdxread-onlycurrentApplicable to AU only. Not applicable to BreezeNET-B units. A read only table index for a MAC Address entry in the Mac Address Deny List Table. Range: 1 to 100.
1.3.6.1.4.1.12394.1.1.5.10.1.1.2ColumnbrzaccVLMacAddressDenyListIdread-writecurrentApplicable to AU only. Not applicable to BreezeNET-B units. The list of MAC Addresses in the Mac Address Deny List Table. To Remove a MAC Address - SET the cor…
1.3.6.1.4.1.12394.1.1.5.10.2ScalarbrzaccVLMacAddressDenyListAddread-writecurrentApplicable to AU only. Not applicable to BreezeNET-B units. Add a MAC address to the MAC Address Deny List Table
1.3.6.1.4.1.12394.1.1.5.10.3ScalarbrzaccVLMacAddressDenyListRemoveread-writecurrentApplicable to AU only. Not applicable to BreezeNET-B units. Delete a MAC address from the MAC Address Deny List Table
1.3.6.1.4.1.12394.1.1.5.10.4ScalarbrzaccVLNumberOfMacAddressesInDenyListread-onlycurrentApplicable to AU only. Not applicable to BreezeNET-B units. Number of MAC addresses in the MAC Address Deny List Table.
1.3.6.1.4.1.12394.1.1.5.10.5ScalarbrzaccVLMacAddressDenyListActionread-writecurrentApplicable to AU only. Define the action to be used by the Mac Address Deny List. allowedList(2) means that the list becomes Allow list.
1.3.6.1.4.1.12394.1.1.5.10.6TablebrzaccVLNewMacAddressDenyListTablenot-accessiblecurrentApplicable to AU only. Not applicable to BreezeNET-B units. A list of up to 100 MAC Addresses of SUs. If brzaccVLMacAddressDenyListAction is set to denyList, t…
1.3.6.1.4.1.12394.1.1.5.10.6.1RowbrzaccVLNewMacAddressDenyListEntrynot-accessiblecurrentApplicable to AU only. Not applicable to BreezeNET-B units. An entry in the Mac Address Deny List Table.
1.3.6.1.4.1.12394.1.1.5.10.6.1.1ColumnbrzaccVLNewMacAddressDenyListIdread-onlycurrentApplicable to AU only. Not applicable to BreezeNET-B units. The list of MAC Addresses in the Mac Address Deny List Table.
1.3.6.1.4.1.12394.1.1.5.10.6.1.2ColumnbrzaccVLNewMacAddressDenyListCommandread-writecurrentApplicable to AU only. Not applicable to BreezeNET-B units. Supports only active(1), createAndGo(4) and destroy(6). Used for add or destroy entry.
1.3.6.1.4.1.12394.1.1.5.11NodebrzAccVLPortsControl
1.3.6.1.4.1.12394.1.1.5.11.1ScalarbrzaccVLEthernetPortControlread-writecurrentApplicable to SU/RB only. Enable/disable the Ethernet port. When disabled, only data frames are blocked. Management frames are accepted.
1.3.6.1.4.1.12394.1.1.5.12ScalarbrzaccVLSendBroadcastsMulticastsAsUnicastsread-writecurrentApplicable to BU only. When enabled the Multicast/Broadcast packets are sent by BU as Unicast packets to RB. When disabled the Multicast/Broadcast packets are …
1.3.6.1.4.1.12394.1.1.6NodebrzaccVLAirInterface
1.3.6.1.4.1.12394.1.1.6.1NodebrzaccVLESSIDParameters
1.3.6.1.4.1.12394.1.1.6.1.1ScalarbrzaccVLESSIDread-writecurrentApplicable to all units. The Extended Service Set ID (ESSID) used to prevent the merging of collocated systems. The ESSID is accessible only with the write com…
1.3.6.1.4.1.12394.1.1.6.1.2ScalarbrzaccVLOperatorESSIDOptionread-writecurrentApplicable to AU/BU only. Enabling/disabling the use of the Operator ESSID.
1.3.6.1.4.1.12394.1.1.6.1.3ScalarbrzaccVLOperatorESSIDread-writecurrentApplicable to AU/BU only. A secondary ESSID to support easy installation of SUs as well as the use of the Best AU/BU feature. Accessible only with SNMP Write C…
1.3.6.1.4.1.12394.1.1.6.1.4ScalarbrzaccVLRunTimeESSIDread-onlycurrentApplicable to SU/RB only. The ESSID of the associated AU/BU. Accessible only with SNMP Write Community. Up to 31 printable ASCII characters, case sensitive.
1.3.6.1.4.1.12394.1.1.6.1.5NodebrzaccVLHiddenESSIDParameters
1.3.6.1.4.1.12394.1.1.6.1.5.1ScalarbrzaccVLAUHiddenESSIDOptionread-writecurrentApplicable to AU/BU only. Enabling/disabling the use of the Hidden ESSID.
1.3.6.1.4.1.12394.1.1.6.1.5.2ScalarbrzaccVLSUHiddenESSIDSupportread-writecurrentApplicable to SU/RB only. Enabling/Disabling the option for an SU/RB to associate with an AU/BU that is using Hidden ESSID
1.3.6.1.4.1.12394.1.1.6.1.5.3ScalarbrzaccVLSUHiddenESSIDTimeoutread-writecurrentApplicable to SU/RB only. If an AU/BU rejects the subscribers because of worng ESSID the SU/RB will try again to associate with this AU/BU only after this peri…
1.3.6.1.4.1.12394.1.1.6.2ScalarbrzaccVLMaximumCellRadiusread-writecurrentApplicable to all units. For AU/BU: read-write. In units with SW version 2.0 and up - applicable only when the Cell Distance Mode is set to Manual. The highest…
1.3.6.1.4.1.12394.1.1.6.3ScalarbrzaccVLAIFSread-writecurrentApplicable to AU and SU. Not applicable to BreezeNET-B products. Not applicable if Wireless Link Prioritization is enabled. Arbitration Inter-Frame Spacing (AI…
1.3.6.1.4.1.12394.1.1.6.4ScalarbrzaccVLWirelessTrapThresholdread-writecurrentApplicable to AU/BU only. A wireless link quality threshold, expressed in % of retransmissions, for sending the brzaccVLAUWirelessQualityTRAP. This trap indica…
1.3.6.1.4.1.12394.1.1.6.5TablebrzaccVLTransmitPowerTablenot-accessiblecurrentApplicable to all units. A table of transmit power parameters.
1.3.6.1.4.1.12394.1.1.6.5.1RowbrzaccVLTransmitPowerEntrynot-accessiblecurrentApplicable to all units. An entry in the Transmit Power Table.
1.3.6.1.4.1.12394.1.1.6.5.1.1ColumnbrzaccVLTransmitPowerIdxread-onlycurrentApplicable to all units. An index of an entry in the Transmit Power Table.
1.3.6.1.4.1.12394.1.1.6.5.1.2ColumnbrzaccVLApplicableModulationLevelread-onlycurrentApplicable to all units. The applicable modulation level for an entry in the Transmit Power Table. Level 8 is not applicable to units with HW revision A.
1.3.6.1.4.1.12394.1.1.6.5.1.3ColumnbrzaccVLMaximumTxPowerRangeread-onlycurrentApplicable to all units. The allowed range for the brzaccVLTxPower parameter at the applicable modulation level . Range: -10 to the maximum allowed power level…
1.3.6.1.4.1.12394.1.1.6.5.1.4ColumnbrzaccVLTxPowerread-writecurrentApplicable to all units. Read-only for units with SW version 4.0 and higher. In AU/BU: The transmit power in dBm defined for the applicable rate. In SU/RB: If …
1.3.6.1.4.1.12394.1.1.6.5.1.5ColumnbrzaccVLCurrentTxPowerread-onlycurrentApplicable to SU/RB. The actual transmit power in dBm for the applicable rate. Range: -17 to the maximum value defined by brzaccVLMaximumTxPowerRange for the a…
1.3.6.1.4.1.12394.1.1.6.6TablebrzaccVLMaximumTransmitPowerTablenot-accessiblecurrentApplicable to SU/RB only. A table of maximum transmit power parameters.
1.3.6.1.4.1.12394.1.1.6.6.1RowbrzaccVLMaximumTransmitPowerEntrynot-accessiblecurrentApplicable to SU/RB only. An entry in the Maximum Transmit Power Table.
1.3.6.1.4.1.12394.1.1.6.6.1.1ColumnbrzaccVLMaximumTransmitPowerIdxread-onlycurrentApplicable to SU/RB only. An index of an entry in the Maximum Transmit Power Table.
1.3.6.1.4.1.12394.1.1.6.6.1.2ColumnbrzaccVLMaxTxApplicableModulationLevelread-onlycurrentApplicable to SU/RB only. The applicable modulation level for an entry in the Maximum Transmit Power Table. Level 8 is not applicable to units with HW revision…
1.3.6.1.4.1.12394.1.1.6.6.1.3ColumnbrzaccVLDefinedMaximumTxPowerRangeread-onlycurrentApplicable to SU/RB only. The allowed range for the brzaccVLMaxTxPower parameter at the applicable modulation level . Range: -10 to the maximum allowed power l…
1.3.6.1.4.1.12394.1.1.6.6.1.4ColumnbrzaccVLMaxTxPowerread-writecurrentApplicable to SU/RB only. Read-only for units with SW version 4.0 and higher. The maximum value that can be configured for the brzaccVLTxPower parameter. This …
1.3.6.1.4.1.12394.1.1.6.10ScalarbrzaccVLMaxNumOfAssociationsread-writecurrentApplicable to AU only. Not applicable to BreezeNET-B products. Sets the upper limit for the number of SUs that can be associated with the AU. Range: For regula…
1.3.6.1.4.1.12394.1.1.6.11NodebrzaccVLBestAu
1.3.6.1.4.1.12394.1.1.6.11.1ScalarbrzaccVLBestAuSupportread-writecurrentApplicable to SU/RB only. Disable/enable the Best AU/BU selection mechanism.
1.3.6.1.4.1.12394.1.1.6.11.2ScalarbrzaccVLBestAuNoOfScanningAttemptsread-writecurrentApplicable to SU/RB only. The number of scanning attempts to collect information for the Best AU/BU decision. Range: 1 to 255.
1.3.6.1.4.1.12394.1.1.6.11.3ScalarbrzaccVLPreferredAuMacAddressread-writecurrentApplicable to SU/RB only. The MAC address of the preferred AU/BU (overriding the Best AU/BU selection process). 000000000000 means no preferred AU/BU.
1.3.6.1.4.1.12394.1.1.6.11.4TablebrzaccVLNeighborAuTablenot-accessiblecurrentApplicable to SU/RB only. A table of data on neighboring AUs/BUs.
1.3.6.1.4.1.12394.1.1.6.11.4.1RowbrzaccVLNeighborAuEntrynot-accessiblecurrentApplicable to SU/RB only. An entry in the Neighbor AU/BU Table.
1.3.6.1.4.1.12394.1.1.6.11.4.1.1ColumnbrzaccVLNeighborAuIdxread-onlycurrentApplicable to SU/RB only. An index of an entry in the Neighbor AU/BU Table.
1.3.6.1.4.1.12394.1.1.6.11.4.1.2ColumnbrzaccVLNeighborAuMacAddread-onlycurrentApplicable to SU/RB only. A MAC address of an AU/BU in the Neighbor AU/BU Table.
1.3.6.1.4.1.12394.1.1.6.11.4.1.3ColumnbrzaccVLNeighborAuESSIDread-onlycurrentApplicable to SU/RB only. The ESSID of an AU/BU in the Neighbor AU/BU Table. Accessible only with SNMP Write Community.
1.3.6.1.4.1.12394.1.1.6.11.4.1.4ColumnbrzaccVLNeighborAuSNRread-onlycurrentApplicable to SU/RB only. The received signal quality (SNR) in dB of an AU/BU in the Neighbor AU/BU Table. If the returned value is 255 this means that the ind…
1.3.6.1.4.1.12394.1.1.6.11.4.1.5ColumnbrzaccVLNeighborAuAssocLoadStatusread-onlycurrentApplicable to SU/RB only. Neighbor AU/BU association load status in the Neighbor AU/BU Table.
1.3.6.1.4.1.12394.1.1.6.11.4.1.6ColumnbrzaccVLNeighborAuMarkread-onlycurrentApplicable to SU/RB only. Neighbor AU/BU mark in the Neighbor AU/BU Table.
1.3.6.1.4.1.12394.1.1.6.11.4.1.7ColumnbrzaccVLNeighborAuHwRevisionread-onlycurrentApplicable to SU/RB only. Neighbor AU/BU HW revision in the Neighbor AU/BU Table.
1.3.6.1.4.1.12394.1.1.6.11.4.1.8ColumnbrzaccVLNeighborAuCountryCoderead-onlycurrentApplicable to SU/RB only. Neighbor AU/BU supported country code in the Neighbor AU/BU Table.
1.3.6.1.4.1.12394.1.1.6.11.4.1.9ColumnbrzaccVLNeighborAuSwVerread-onlycurrentApplicable to SU/RB only. Neighbor AU/BU SW version in the Neighbor AU/BU Table.
1.3.6.1.4.1.12394.1.1.6.11.4.1.10ColumnbrzaccVLNeighborAuAtpcOptionread-onlycurrentApplicable to SU/RB only. Neighbor AU/BU ATPC option configuration in the Neighbor AU/BU Table.
1.3.6.1.4.1.12394.1.1.6.11.4.1.11ColumnbrzaccVLNeighborAuAdapModOptionread-onlycurrentApplicable to SU/RB only. Neighbor AU/BU adaptive modulation option configuration in the Neighbor AU/BU Table.
1.3.6.1.4.1.12394.1.1.6.11.4.1.12ColumnbrzaccVLNeighborAuBurstModeOptionread-onlycurrentApplicable to SU/RB only. Neighbor AU/BU burst mode option configuration in the Neighbor AU/BU Table.
1.3.6.1.4.1.12394.1.1.6.11.4.1.14ColumnbrzaccVLNeighborAuDfsOptionread-onlycurrentApplicable to SU/RB only. Neighbor AU/BU DFS option configuration in the Neighbor AU/BU Table.
1.3.6.1.4.1.12394.1.1.6.11.4.1.15ColumnbrzaccVLNeighborAuConcatenationOptionread-onlycurrentApplicable to SU/RB only. Neighbor AU/BU concatenation option configuration in the Neighbor AU/BU Table.
1.3.6.1.4.1.12394.1.1.6.11.4.1.17ColumnbrzaccVLNeighborAuLearnCountryCodeBySUread-onlycurrentApplicable to SU only. Starting with 4.0 is not applicable for BA4900 and BreezeNET B products. Neighbor AU Learn Country Code by SU configuration in the Neigh…
1.3.6.1.4.1.12394.1.1.6.11.4.1.18ColumnbrzaccVLNeighborAuSecurityModeread-onlycurrentApplicable to SU/RB only. Neighbor AU/BU security mode configuration in the Neighbor AU/BU Table.
1.3.6.1.4.1.12394.1.1.6.11.4.1.19ColumnbrzaccVLNeighborAuAuthOptionread-onlycurrentApplicable to SU/RB only. Neighbor AU/BU authentication option configuration in the Neighbor AU/BU Table.
1.3.6.1.4.1.12394.1.1.6.11.4.1.20ColumnbrzaccVLNeighborAuDataEncyptOptionread-onlycurrentApplicable to SU/RB only. Neighbor AU/BU data encryption option configuration in the Neighbor AU/BU Table.
1.3.6.1.4.1.12394.1.1.6.11.4.1.21ColumnbrzaccVLNeighborAuPerSuDistanceLearningread-onlycurrentApplicable to SU only. Neighbor AU per SU distance learning option configuration in the Neighbor AU Table.
1.3.6.1.4.1.12394.1.1.6.11.4.1.22ColumnbrzaccVLNeighborAuRSSIread-onlycurrentApplicable to SU/RB only. The Recieved Signal Strength Indication of an AU/BU in the Neighbor AU/BU Table. If the returned value is 255 this means that the ind…
1.3.6.1.4.1.12394.1.1.6.12NodebrzaccVLFrequencyDefinition
1.3.6.1.4.1.12394.1.1.6.12.1ScalarbrzaccVLSubBandLowerFrequencyread-writeobsoleteApplicable to SU only. Not applicable to units with SW version 2.0 or higher. The lowest frequency in the subset to be used for scanning. For 5.8GHz products t…
1.3.6.1.4.1.12394.1.1.6.12.2ScalarbrzaccVLSubBandUpperFrequencyread-writeobsoleteApplicable to SU only. Not applicable to units with SW version 2.0 or higher. The highest frequency in the subset to be used for scanning. For 5.8GHz products …
1.3.6.1.4.1.12394.1.1.6.12.3ScalarbrzaccVLScanningStepread-onlycurrentApplicable to all units - For flexible Sub-Bands only. For units with version 2.0 and above this is a read-only parameter. The scanning step to be used for gen…
1.3.6.1.4.1.12394.1.1.6.12.4TablebrzaccVLFrequencySubsetTablenot-accessiblecurrentApplicable to SU/RB and to AU/BU. Not applicable to SU/RB with SW version 4.0 and higher. The Frequency Subset Table that includes all frequencies from the sel…
1.3.6.1.4.1.12394.1.1.6.12.4.1RowbrzaccVLFrequencySubsetEntrynot-accessiblecurrentApplicable to SU/RB and to AU/BU. Not applicable to SU/RB with SW version 4.0 and higher. An entry in the Frequency Subset Table.
1.3.6.1.4.1.12394.1.1.6.12.4.1.1ColumnbrzaccVLFrequencySubsetTableIdxread-onlycurrentApplicable to SU/RB and to AU/BU. Not applicable to SU/RB with SW version 4.0 and higher. An index of an entry in the Frequency subset Table.
1.3.6.1.4.1.12394.1.1.6.12.4.1.2ColumnbrzaccVLFrequencySubsetFrequencyread-onlycurrentApplicable to SU/RB and to AU/BU. Not applicable to SU/RB with SW version 4.0 and higher. Applicable to all units with HW revision B and lower (for units with …
1.3.6.1.4.1.12394.1.1.6.12.4.1.3ColumnbrzaccVLFrequencySubsetActiveread-writecurrentApplicable to SU/RB and to AU/BU. Not applicable to SU/RB with SW version 4.0 and higher. The status of an entry in the Frequency subset Table. The frequency o…
1.3.6.1.4.1.12394.1.1.6.12.4.1.4ColumnbrzaccVLFrequencySubsetFrequencyNewread-onlycurrentApplicable to all units. Not applicable to SU/RB with SW version 4.0 and higher. The frequency in MHz of an entry in the Frequency Subset table. (Replaces brza…
1.3.6.1.4.1.12394.1.1.6.12.5ScalarbrzaccVLSetSelectedFreqSubsetread-writecurrentApplicable to SU/RB and to AU/BU. Not applicable to SU/RB with SW version 4.0 and higher. Apply the selected subset. After the next reset the new subset will b…
1.3.6.1.4.1.12394.1.1.6.12.6TablebrzaccVLCurrentFrequencySubsetTablenot-accessiblecurrentApplicable to SU/RB and to AU/BU. Not applicable to SU/RB with SW version 4.0 and higher. The Current Frequency Subset table. In SU/RB it includes all frequenc…
1.3.6.1.4.1.12394.1.1.6.12.6.1RowbrzaccVLCurrentFrequencySubsetEntrynot-accessiblecurrentApplicable to SU/RB and to AU/BU. An entry in the Current Frequency Subset Table.
1.3.6.1.4.1.12394.1.1.6.12.6.1.1ColumnbrzaccVLCurrentFrequencySubsetTableIdxread-onlycurrentApplicable to SU/RB and to AU/BU. An index of an entry in the Current Frequency subset Table. Not applicable to SU/RB with SW version 4.0 and higher.
1.3.6.1.4.1.12394.1.1.6.12.6.1.2ColumnbrzaccVLCurrentFrequencySubsetFrequencyread-onlycurrentApplicable to all units. Not applicable to SU/RB with SW version 4.0 and higher. Applicable to all units with HW revision B and lower (for units with HW revisi…
1.3.6.1.4.1.12394.1.1.6.12.6.1.3ColumnbrzaccVLCurrentFrequencySubsetFrequencyNewread-onlycurrentApplicable to all units. Not applicable to SU/RB with SW version 4.0 and higher. The frequency in MHz of an entry in the Current Frequency Subset table. (Repla…
1.3.6.1.4.1.12394.1.1.6.12.7ScalarbrzaccVLCurrentAUOperatingFrequencyread-onlycurrentApplicable to AU/BU with HW revision B and lower (for units with HW revision C and higher replaced by brzaccVLCurrentUOperatingFrequencyNew to support a resolu…
1.3.6.1.4.1.12394.1.1.6.12.8ScalarbrzaccVLAUDefinedFrequencyread-writecurrentApplicable to AU/BU with HW revision B and lower (for units with HW revision C and higher replaced by brzaccVLAUDefinedFrequencyNew to support a resolution of …
1.3.6.1.4.1.12394.1.1.6.12.9ScalarbrzaccVLCurrentSUOperatingFrequencyread-onlycurrentApplicable to SU/RB only. The frequency used currently by the unit. For 5.8GHz products with SW version below 2.0 the range is 5740 to 5830 MHz using 10MHz res…
1.3.6.1.4.1.12394.1.1.6.12.10NodebrzaccVLSubBandSelect
1.3.6.1.4.1.12394.1.1.6.12.10.1ScalarbrzaccVLSelectSubBandIndexread-writecurrentApplicable to all units with SW version below 4.0 For units with SW version 4.0 and up it is applicable only for AU/BU. For SU/RB it defines only the sub-band …
1.3.6.1.4.1.12394.1.1.6.12.11NodebrzaccVLDFSParameters
1.3.6.1.4.1.12394.1.1.6.12.11.1ScalarbrzaccVLDFSOptionread-writecurrentApplicable to AU/BU. Applicable to SU/RB with SW version 5.5.20 and higher. Enabling/disabling the DFS Algorithm. Not applicable if DFS Option is not supported…
1.3.6.1.4.1.12394.1.1.6.12.11.3ScalarbrzaccVLDFSChannelCheckTimeread-writecurrentApplicable to AU/BU. Applicable to SU/RB with SW version 5.5.20 and higher. Channel Availability Check time defines the time the unit checks the channel for pr…
1.3.6.1.4.1.12394.1.1.6.12.11.4ScalarbrzaccVLDFSChannelAvoidancePeriodread-writecurrentApplicable to AU/BU. Applicable to SU/RB with SW version 5.5.20 and higher. Defines the time after detecting radar signals in a channel of avoiding using the c…
1.3.6.1.4.1.12394.1.1.6.12.11.5ScalarbrzaccVLDFSSuWaitingOptionread-writecurrentApplicable to AU/BU only. Defines whether the associated SUs should wait for this AU/BU after it stopped transmitting due to radar detection, before they start…
1.3.6.1.4.1.12394.1.1.6.12.11.6ScalarbrzaccVLDFSClearRadarDetectedChannelsAfterResetread-writecurrentApplicable to all units with SW version 5.5.20 and higher. Clear Radar Detected and Adjacent to Radar channels after unit reset. Returns the unit to operate in…
1.3.6.1.4.1.12394.1.1.6.12.11.7TablebrzaccVLDFSRadarDetectionChannelsTablenot-accessiblecurrentApplicable to AU/BU only. Applicable only when DFS option is on. Displays the current channels defined in the sub-band and their radar detection status.
1.3.6.1.4.1.12394.1.1.6.12.11.7.1RowbrzaccVLDFSRadarDetectionChannelsEntrynot-accessiblecurrentApplicable to AU/BU only. An entry in the brzaccVLDFSRadarDetectionChannelsTable.
1.3.6.1.4.1.12394.1.1.6.12.11.7.1.1ColumnbrzaccVLDFSChannelIdxread-onlycurrentApplicable to AU/BU only. Read-only. The index of the entry in the brzaccVLDFSRadarDetectionChannelsTable.
1.3.6.1.4.1.12394.1.1.6.12.11.7.1.2ColumnbrzaccVLDFSChannelFrequencyread-onlycurrentApplicable to AU/BU with HW revision B and lower (for units with HW revision C and higher replaced by brzaccVLDFSChannelFrequency New to support a resolution o…
1.3.6.1.4.1.12394.1.1.6.12.11.7.1.3ColumnbrzaccVLDFSChannelRadarStatusread-onlycurrentApplicable to AU/BU only. The radar detection status of a channel in brzaccVLDFSRadarDetectionChannelTable.
1.3.6.1.4.1.12394.1.1.6.12.11.7.1.4ColumnbrzaccVLDFSChannelFrequencyNewread-onlycurrentApplicable to AU/BU. The frequency of a channel in the DFS Radar Detection Channels Table. (Replaces brzaccVLDFSChannelFrequency to support a resolution of 0.5…
1.3.6.1.4.1.12394.1.1.6.12.11.8ScalarbrzaccVLDFSMinimumPulsesToDetectread-writecurrentApplicable to AU/BU. Applicable to SU/RB with SW version 5.5.20 and higher. Defines the minimum number of pulses to detect a radar. Range: 1 - 100.
1.3.6.1.4.1.12394.1.1.6.12.11.9NodebrzaccVLDFSChannelReuseParameters
1.3.6.1.4.1.12394.1.1.6.12.11.9.1ScalarbrzaccVLDFSChannelReuseOptionread-writecurrentApplicable to AU/BU only. Enabling/disabling the DFS Channel Reuse Algorithm. Not applicable if DFS Option is not supported by the current Sub Band.
1.3.6.1.4.1.12394.1.1.6.12.11.9.2ScalarbrzaccVLDFSRadarActivityAssessmentPeriodread-writecurrentApplicable to AU/BU only. Range: 1 to 12 (Houres).
1.3.6.1.4.1.12394.1.1.6.12.11.9.3ScalarbrzaccVLDFSMaximumNumberOfDetectionsInAssessmentPeriodread-writecurrentApplicable to AU/BU only. Range: 1 to 10 (Times).
1.3.6.1.4.1.12394.1.1.6.12.11.10ScalarbrzaccVLDFSDetectionAlgorithmread-writecurrentApplicable to AU/BU. Applicable to SU/RB with SW version 5.5.20 and higher. Defines the DFS Detection Algorithm.
1.3.6.1.4.1.12394.1.1.6.12.11.11ScalarbrzaccVLDFSRemoteRadarEventReportsread-writecurrentApplicable to AU only with SW version 5.5.20 and higher. Defines the number of SU radar reports for the AU to leave channel . Range: 0 - 512.
1.3.6.1.4.1.12394.1.1.6.12.11.12ScalarbrzaccVLDFSRemoteRadarEventMonitoringPeriodread-writecurrentApplicable to AU only with SW version 5.5.20 and higher. Defines the interval in minutes of accumulated SU Radar Reports for the AU to leave channel. Range: 1 …
1.3.6.1.4.1.12394.1.1.6.12.11.13ScalarbrzaccVLEnhancedETSIRadarDetectionread-writecurrentApplicable to AU/BU units with software version 5.5.27.1 and higher.
1.3.6.1.4.1.12394.1.1.6.12.12ScalarbrzaccVLCountryCodeLearningBySUread-writecurrentApplicable to AU only. Starting with 4.0 it is not applicable for BA4900 and BreezeNET B. Defines whether the SUs learn the country code of the AU.
1.3.6.1.4.1.12394.1.1.6.12.13ScalarbrzaccVLCurrentAUOperatingFrequencyNewread-onlycurrentApplicable to AU/BU. The operating frequency in MHz. (Replaces brzaccVLCurrentAUOperatingFrequency to support a resolution of 0.5 MHz for units with HW revisio…
1.3.6.1.4.1.12394.1.1.6.12.14ScalarbrzaccVLAUDefinedFrequencyNewread-writecurrentApplicable to AU/BU. For 5.8GHz products with SW version below 2.0 this is the frequency in MHz of the AU/BU after the next reset. For units with SW version 2.…
1.3.6.1.4.1.12394.1.1.6.12.15NodebrzaccVLAutoSubBandSelect
1.3.6.1.4.1.12394.1.1.6.12.15.1ScalarbrzaccVLAutoSubBandSelectedFreqSubsetread-writecurrentApplicable to SU/RB with SW version 4.0 and higher. Apply the selected subset. After the next reset the new subset will be used for scanning.
1.3.6.1.4.1.12394.1.1.6.12.15.2TablebrzaccVLAutoSubBandFrequencySubsetTablenot-accessiblecurrentApplicable to SU/RB with SW version 4.0 and higher. The Frequency Subset Table that includes all available sub-bands and all the frequencies in these sub-bands.
1.3.6.1.4.1.12394.1.1.6.12.15.2.1RowbrzaccVLAutoSubBandFrequencySubsetEntrynot-accessiblecurrentApplicable to SU/RB with SW version 4.0 and higher. An entry in the Frequency Subset Table.
1.3.6.1.4.1.12394.1.1.6.12.15.2.1.1ColumnbrzaccVLAutoSubBandFrequencySubsetBandIdxread-onlycurrentApplicable to SU/RB with SW version 4.0 and higher. The index of the applicable Sub Band. This is the Sub Band ID of the relevant entry in the Country Dependen…
1.3.6.1.4.1.12394.1.1.6.12.15.2.1.2ColumnbrzaccVLAutoSubBandFrequencySubsetFrequencyIdxread-onlycurrentApplicable to SU/RB with SW version 4.0 and higher. The index of the applicable frequency in the applicable Sub Band. Serves also as an index of the entry in t…
1.3.6.1.4.1.12394.1.1.6.12.15.2.1.3ColumnbrzaccVLAutoSubBandFrequencySubsetActiveread-writecurrentApplicable to SU/RB with SW version 4.0 and higher. The status of an entry in the Auto Sub Band Frequency subset Table. The frequency of an active entry will b…
1.3.6.1.4.1.12394.1.1.6.12.15.2.1.4ColumnbrzaccVLAutoSubBandFrequencySubsetFrequencyread-onlycurrentApplicable to SU/RB with SW version 4.0 and higher. The frequency in MHz of the entry in the Auto Sub Band Frequency Subset table.
1.3.6.1.4.1.12394.1.1.6.12.15.2.1.5ColumnbrzaccVLAutoSubBandFrequencySubsetBandwidthread-onlycurrentApplicable to SU/RB with SW version 4.0 and higher. The bandwidth in MHz of the entry in the Auto Sub Band Frequency Subset table.
1.3.6.1.4.1.12394.1.1.6.12.15.2.1.6ColumnbrzaccVLAutoSubBandFrequencySubsetDFSStatusread-onlycurrentApplicable to SU/RB with SW version 4.0 and higher. The channel status of the entry in the Auto Sub Band Frequency Subset table.
1.3.6.1.4.1.12394.1.1.6.13NodebrzaccVLATPC
1.3.6.1.4.1.12394.1.1.6.13.1ScalarbrzaccVLAtpcOptionread-writecurrentApplicable all units. Enabling/disabling the ATPC Algorithm.
1.3.6.1.4.1.12394.1.1.6.13.2ScalarbrzaccVLDeltaFromMinSNRLevelread-writecurrentApplicable AU/BU only. The Minimum SNR Level plus the value of this parameter define the maximum desired level of the average SNR at the AU/BU. If the ATPC Opt…
1.3.6.1.4.1.12394.1.1.6.13.3ScalarbrzaccVLMinimumSNRLevelread-writecurrentApplicable AU/BU only. Defines the minimum desired level of the average SNR at the AU/BU. Below this level, if *AtpcOption is enabled, the AU/BU will transmit …
1.3.6.1.4.1.12394.1.1.6.13.4ScalarbrzaccVLMinimumIntervalBetweenATPCMessagesread-writecurrentApplicable AU/BU only. The minimum interval between two consecutive AU/BU to SU/RB messages. Range: 1 to 3600 (Sec).
1.3.6.1.4.1.12394.1.1.6.13.6ScalarbrzaccVLPowerLevelStepsread-writecurrentApplicable AU/BU only. The step in dB that the SU/RB will use when receiving an ATPC Power-Up/Power-Down message. Range: 1 to 20 (dB).
1.3.6.1.4.1.12394.1.1.6.13.7ScalarbrzaccVLAtpcOptionEZread-writecurrentApplicable AU only. Enabling/disabling the ATPC Algorithm for EZ.
1.3.6.1.4.1.12394.1.1.6.15NodebrzaccVLCellDistanceParameters
1.3.6.1.4.1.12394.1.1.6.15.1ScalarbrzaccVLCellDistanceModeread-writecurrentApplicable AU/BU only. The selected mode of deciding on Cell Distance.
1.3.6.1.4.1.12394.1.1.6.15.2ScalarbrzaccVLFairnessFactorread-writecurrentApplicable AU/BU only. Not applicable to BreezeNET-B products for SW version below 4.0. The percentage of the maximum distance that is taken into account in th…
1.3.6.1.4.1.12394.1.1.6.15.3ScalarbrzaccVLMeasuredCellDistanceread-onlycurrentApplicable AU/BU only. The Maximum Cell Distance as calculated by the AU/BU. Range: 0 to 54 (Kilometers).
1.3.6.1.4.1.12394.1.1.6.15.4ScalarbrzaccVLUnitWithMaxDistanceread-onlycurrentApplicable AU only. Not applicable to BreezeNET-B units. The MAC address of the unit with the maximum distance from the AU.
1.3.6.1.4.1.12394.1.1.6.15.5ScalarbrzaccVLPerSuDistanceLearningread-writecurrentAplicable to AU only. Applicable only if Cell Distance Mode is set to Automatic. When disabled, all SUs in the cell will use for the ACK Timeout the computed d…
1.3.6.1.4.1.12394.1.1.6.16ScalarbrzaccVLScanningModeread-writecurrentApplicable to SU/RB only. The scanning mode. In cells where the DFS Option is enabled Scanning Mode is forced to Passive.
1.3.6.1.4.1.12394.1.1.6.17ScalarbrzaccVLAntennaGainread-writecurrentApplicable to all units. Read-write in units where brzaccVLAntennaGainChange is supported. Read-only in units where brzaccVLAntennaGainChange is not supported.…
1.3.6.1.4.1.12394.1.1.6.18NodebrzaccVLSpectrumAnalysisParameters
1.3.6.1.4.1.12394.1.1.6.18.1ScalarbrzaccVLSpectrumAnalysisChannelScanPeriodread-writecurrentApplicable to all units. The period of staying on each channel for information gathering when performing Spectrum analysis. Range: 2-30 seconds.
1.3.6.1.4.1.12394.1.1.6.18.2ScalarbrzaccVLSpectrumAnalysisScanCyclesread-writecurrentApplicable to all units. The number of scanning cycles when performing Spectrum Analysis. Range: 1-100.
1.3.6.1.4.1.12394.1.1.6.18.3ScalarbrzaccVLAutomaticChannelSelectionread-writecurrentApplicable to AU/BU only. Defines weather the AU/BU shall choose the most noise free channel upon startup after spectrum analysis.
1.3.6.1.4.1.12394.1.1.6.18.4ScalarbrzaccVLSpectrumAnalysisActivationread-writecurrentApplicable to all units. Activates spectrum analysis, the unit is automatically reset upon activation.
1.3.6.1.4.1.12394.1.1.6.18.5ScalarbrzaccVLSpectrumAnalysisStatusread-onlycurrentApplicable to all units. Defines whether the unit is currently performing a Spectrum Analysis process. Value currentlyBlocked means unit current status prohibi…
1.3.6.1.4.1.12394.1.1.6.18.6ScalarbrzaccVLResetSpectrumCountersread-writecurrentApplicable to all units. Resets the spectrum analysis counters.
1.3.6.1.4.1.12394.1.1.6.18.7TablebrzaccVLSpectrumAnalysisInformationTablenot-accessiblecurrentApplicable to all units. The spectrum analysis information table.
1.3.6.1.4.1.12394.1.1.6.18.7.1RowbrzaccVLSpectrumAnalysisInformationEntrynot-accessiblecurrentApplicable to all units. The spectrum analysis information table entry.
1.3.6.1.4.1.12394.1.1.6.18.7.1.1ColumnbrzaccVLSpectrumAnalysisInformationTableIdxread-onlycurrentApplicable to all units. A read only table index for a Spectrum Analysis Information entry in the Spectrum Analysis Information Table.
1.3.6.1.4.1.12394.1.1.6.18.7.1.2ColumnbrzaccVLSpectrumAnalysisInformationChannelread-onlycurrentApplicable to all units. The channels in the Spectrum Analysis Information Table. If the unit is currently under spectrum analysis the channels would be those …
1.3.6.1.4.1.12394.1.1.6.18.7.1.3ColumnbrzaccVLSpectrumAnalysisInformationSignalCountread-onlycurrentApplicable to all units. The number of signals (excluding OFDM frames) detected in the channel. If the unit is currently under spectrum analysis the count woul…
1.3.6.1.4.1.12394.1.1.6.18.7.1.4ColumnbrzaccVLSpectrumAnalysisInformationSignalSNRread-onlycurrentApplicable to all units. The approximate SNR of the signals (excluding OFDM frames) detected in the channel. If the unit is currently under spectrum analysis t…
1.3.6.1.4.1.12394.1.1.6.18.7.1.5ColumnbrzaccVLSpectrumAnalysisInformationSignalWidthread-onlycurrentApplicable to all units. The average width of the signals (excluding OFDM frames) detected in the channel. If the unit is currently under spectrum analysis the…
1.3.6.1.4.1.12394.1.1.6.18.7.1.6ColumnbrzaccVLSpectrumAnalysisInformationOFDMFramesread-onlycurrentApplicable to all units. The number of OFDM frames detected in the channel. If the unit is currently under spectrum analysis the count would be of the analysis…
1.3.6.1.4.1.12394.1.1.6.18.7.1.7ColumnbrzaccVLSpectrumAnalysisInformationOFDMAvgSnrread-onlycurrentApplicable to all units. The average SNR of the OFDM frames detected in the channel. If the unit is currently under spectrum analysis the average SNR would be …
1.3.6.1.4.1.12394.1.1.6.18.7.1.8ColumnbrzaccVLSpectrumAnalysisInformationAvgNoiseFloorread-onlycurrentApplicable to all units. The average Noise Floor detected in the channel. If the unit is currently under spectrum analysis the average Noise Floor would be of …
1.3.6.1.4.1.12394.1.1.6.18.7.1.9ColumnbrzaccVLSpectrumAnalysisInformationMaxNoiseFloorread-onlycurrentApplicable to all units. The maximum Noise Floor detected in the channel. If the unit is currently under spectrum analysis the maximum Noise Floor would be of …
1.3.6.1.4.1.12394.1.1.6.18.7.1.10ColumnbrzaccVLSpectrumAnalysisInformationSignalMaxSNRread-onlycurrentApplicable to all units. The maximum SNR of the signals (excluding OFDM frames) detected in the channel. If the unit is currently under spectrum analysis the m…
1.3.6.1.4.1.12394.1.1.6.18.7.1.11ColumnbrzaccVLSpectrumAnalysisInformationOFDMMaxSNRread-onlycurrentApplicable to all units. The maximum SNR of the OFDM frames detected in the channel. If the unit is currently under spectrum analysis the maximum SNR would be …
1.3.6.1.4.1.12394.1.1.6.19ScalarbrzaccVLMaxNumOfAssociationsLimitread-onlycurrentApplicable to AU only. Not applicable to BreezeNET-B products. Shows the limit for the number of SUs that can be associated with the AU. For AU-BS, AU-SA, AU i…
1.3.6.1.4.1.12394.1.1.6.20NodebrzaccVLDisassociate
1.3.6.1.4.1.12394.1.1.6.20.1ScalarbrzaccVLDisassociateAllSUsread-writecurrentApplicable to AU only. The AU shall disassociate all its associated units.
1.3.6.1.4.1.12394.1.1.6.20.2ScalarbrzaccVLDisassociateSuByMacAddressread-writecurrentApplicable to AU only. The AU shall disassociate the SU with the configured MAC address.
1.3.6.1.4.1.12394.1.1.6.21ScalarbrzaccVLTxControlread-writecurrentApplicable to AU/BU only. Tx Control of the AU/BU. Starting with version 4.0 it is run-time. For SW version below 4.0 the unit reset itself. If set to ethernet…
1.3.6.1.4.1.12394.1.1.6.22ScalarbrzaccVLLostBeaconsWatchdogThresholdread-writecurrentApplicable to AU/BU only. The number of unsuccessful consecutive transmissions beacons before Internal refresh is performed. 0 means that the lost beacons watc…
1.3.6.1.4.1.12394.1.1.6.23ScalarbrzaccVLTransmitPowerread-writecurrentApplicable to all units with SW version 4.0 and higher. The uniform transmit power for all modulation levels. For a specific modulation level the effective tra…
1.3.6.1.4.1.12394.1.1.6.24ScalarbrzaccVLMaximumTxPowerread-writecurrentApplicable to only SU/RB with SW version 4.0 and higher. The Maximum Transmit Power for all modulation levels. The Maximum Transmit Power for a specific modula…
1.3.6.1.4.1.12394.1.1.6.25NodebrzaccVLCountryCodeParameters
1.3.6.1.4.1.12394.1.1.6.25.1ScalarbrzaccVLCountryCodeReApplyread-writecurrentApplicable to all units. Re-apply country code parameters.
1.3.6.1.4.1.12394.1.1.6.25.2TablebrzaccVLCountryCodeTablenot-accessiblecurrentApplicable to all units.
1.3.6.1.4.1.12394.1.1.6.25.2.1RowbrzaccVLCountryCodeEntrynot-accessiblecurrentApplicable to all units.
1.3.6.1.4.1.12394.1.1.6.25.2.1.1ColumnbrzaccVLCCNumberread-onlycurrentApplicable to all units.
1.3.6.1.4.1.12394.1.1.6.25.2.1.2ColumnbrzaccVLCCNameread-onlycurrentApplicable to all units.
1.3.6.1.4.1.12394.1.1.6.25.2.1.3ColumnbrzaccVLCCAuthenticationEncryptionSupportread-onlycurrentApplicable to all units.
1.3.6.1.4.1.12394.1.1.6.25.2.1.4ColumnbrzaccVLCCDataEncryptionSupportread-onlycurrentApplicable to all units.
1.3.6.1.4.1.12394.1.1.6.25.2.1.5ColumnbrzaccVLCCAESEncryptionSupportread-onlycurrentApplicable to all units.
1.3.6.1.4.1.12394.1.1.6.25.3TablebrzaccVLCCParamsTablenot-accessiblecurrentApplicable to all units. A table of country dependent parameters.
1.3.6.1.4.1.12394.1.1.6.25.3.1RowbrzaccVLCCParamsEntrynot-accessiblecurrentApplicable to all units.
1.3.6.1.4.1.12394.1.1.6.25.3.1.1ColumnbrzaccVLCCNumberIdxread-onlycurrentApplicable to all units.
1.3.6.1.4.1.12394.1.1.6.25.3.1.2ColumnbrzaccVLCCParamsIndexread-onlycurrentApplicable to all units.
1.3.6.1.4.1.12394.1.1.6.25.3.1.3ColumnbrzaccVLCCParamsFrequenciesread-onlycurrentApplicable to all units. The frequencies included in the applicable sub-band entry.
1.3.6.1.4.1.12394.1.1.6.25.3.1.4ColumnbrzaccVLCCAllowedBandwidthread-onlycurrentApplicable to all units. The bandwidth when using the applicable the sub-band.
1.3.6.1.4.1.12394.1.1.6.25.3.1.5ColumnbrzaccVLCCRegulationMaxTxPowerAtAntennaPortread-onlycurrentApplicable to all units. The maximum allowed Tx power when using the applicable sub-band. A RegulationMaxTxPowerAtAntennaPort of 255, means no limit
1.3.6.1.4.1.12394.1.1.6.25.3.1.6ColumnbrzaccVLCCRegulationMaxEIRPread-onlycurrentApplicable to all units. The maximum Tx EIRP when using the applicable sub-band. A Regulation Max EIRP of 0, means no limit.
1.3.6.1.4.1.12394.1.1.6.25.3.1.7ColumnbrzaccVLCCMinModulationLevelread-onlycurrentApplicable to all units. The minimum supported modulation level.
1.3.6.1.4.1.12394.1.1.6.25.3.1.8ColumnbrzaccVLCCMaxModulationLevelread-onlycurrentApplicable to all units. The maximum supported modulation level.
1.3.6.1.4.1.12394.1.1.6.25.3.1.9ColumnbrzaccVLCCBurstModeSupportread-onlycurrentApplicable to all units. The supported Burst Mode Option.
1.3.6.1.4.1.12394.1.1.6.25.3.1.10ColumnbrzaccVLCCMaximumBurstDurationread-onlycurrentApplicable to all units. Applicable only if Burst Mode Option is supported. The maximum supported burst duration.
1.3.6.1.4.1.12394.1.1.6.25.3.1.11ColumnbrzaccVLCCDfsSupportread-onlycurrentApplicable to AU/BU only. The supported Dfs Option.
1.3.6.1.4.1.12394.1.1.6.25.3.1.12ColumnbrzaccVLCCMinimumHwRevisionread-onlycurrentApplicable to all units. The Minimum HW Revision needed to support the country code.
1.3.6.1.4.1.12394.1.1.6.25.4ScalarbrzaccVLCountryCodeSelectread-writecurrentApplicable to all units. Configure the Country Code WARNING: It is the responsibility of the wireless system operator to verify that use of the selected Countr…
1.3.6.1.4.1.12394.1.1.6.26NodebrzaccVLNoiseImmunityParameters
1.3.6.1.4.1.12394.1.1.6.26.1ScalarbrzaccVLNoiseImmunityAlgorithmread-writecurrentApplicable to all units except for units with HW revision B and lower. automatic(2) is not applicable for units with HW revision F or G. Noise Immunity Algorit…
1.3.6.1.4.1.12394.1.1.6.26.2ScalarbrzaccVLNoiseImmunityLevelread-writecurrentApplicable to all units except for units with HW revision B and lower. Noise Immunity Level. (255) : Not Available
1.3.6.1.4.1.12394.1.1.6.26.3ScalarbrzaccVLSpuriousImmunityLevelread-writecurrentApplicable to all units except for units with HW revision B and lower. (255) : Not Available
1.3.6.1.4.1.12394.1.1.6.26.4ScalarbrzaccVLOFDMWeakSignalread-writecurrentApplicable to all units except for units with HW revision B and lower.
1.3.6.1.4.1.12394.1.1.6.26.5ScalarbrzaccVLPulseDetectionSensitivityread-writecurrentApplicable to all units.
1.3.6.1.4.1.12394.1.1.6.27TablebrzaccVLNewTransmitPowerTablenot-accessiblecurrentApplicable to all units with SW version 5.1 and higher A table of transmit power parameters.
1.3.6.1.4.1.12394.1.1.6.27.1RowbrzaccVLNewTransmitPowerEntrynot-accessiblecurrentApplicable to all units with SW version 5.1 and higher An entry in the Transmit Power Table.
1.3.6.1.4.1.12394.1.1.6.27.1.1ColumnbrzaccVLNewModulationLevelIdxread-onlycurrentApplicable to all units with SW version 5.1 and higher. An index ( and modulation level ) of an entry in the NewTransmitPowerTable.
1.3.6.1.4.1.12394.1.1.6.27.1.2ColumnbrzaccVLNewMaximumTxPowerRangeread-onlycurrentApplicable to all units with SW version 5.1 and higher. The allowed range for the brzaccVLNewTxPower parameter at the applicable modulation level . Range: -10 …
1.3.6.1.4.1.12394.1.1.6.27.1.3ColumnbrzaccVLNewTxPowerread-writecurrentApplicable to all units with SW version 5.1 and higher. In AU/BU: The transmit power in dBm defined for the applicable rate. In SU/RB: If ATPC is disabled, thi…
1.3.6.1.4.1.12394.1.1.6.27.1.4ColumnbrzaccVLNewCurrentTxPowerread-onlycurrentApplicable to SU/RB with SW version 5.1 and higher. The actual transmit power in dBm for the applicable rate. Range: -17 to the maximum value defined by brzacc…
1.3.6.1.4.1.12394.1.1.6.28TablebrzaccVLNewMaximumTransmitPowerTablenot-accessiblecurrentApplicable to SU/RB only. A table of maximum transmit power parameters.
1.3.6.1.4.1.12394.1.1.6.28.1RowbrzaccVLNewMaximumTransmitPowerEntrynot-accessiblecurrentApplicable to SU/RB only. An entry in the Maximum Transmit Power Table.
1.3.6.1.4.1.12394.1.1.6.28.1.1ColumnbrzaccVLNewMaxModulationLevelIdxread-onlycurrentApplicable to SU/RB only. The applicable modulation level for an entry in the NEW Maximum Transmit Power Table. This OID also represent an index of an entry in…
1.3.6.1.4.1.12394.1.1.6.28.1.2ColumnbrzaccVLNewDefinedMaximumTxPowerRangeread-onlycurrentApplicable to SU/RB only. The allowed range for the brzaccVLNewMaxTxPower parameter at the applicable modulation level . Range: -10 to the maximum allowed powe…
1.3.6.1.4.1.12394.1.1.6.28.1.3ColumnbrzaccVLNewMaxTxPowerread-writecurrentApplicable to SU/RB only. Read-only for units with SW version 4.0 and higher. The maximum value that can be configured for the brzaccVLNewTxPower parameter. Th…
1.3.6.1.4.1.12394.1.1.6.29NodebrzaccVLNoiseFloorCalculationParameters
1.3.6.1.4.1.12394.1.1.6.29.1ScalarbrzaccVLNoiseFloorCalculationModeread-writecurrentApplicable to all units.
1.3.6.1.4.1.12394.1.1.6.29.2ScalarbrzaccVLNoiseFloorForcedValueread-writecurrentApplicable to all units. Range: -107 to -55
1.3.6.1.4.1.12394.1.1.6.30NodebrzaccVLNoiseFloorCalibrationParameters
1.3.6.1.4.1.12394.1.1.6.30.1ScalarbrzaccVLNoiseFloorRunCalibrationread-writecurrentNot applicable to 900 MHz units. Start calibration process for Noise Floor Indication. The unit will rest itself, will perform calibration and after that will …
1.3.6.1.4.1.12394.1.1.6.30.2ScalarbrzaccVLNoiseFloorFieldCalibrationStatusread-onlycurrentApplicable to all units. Defines weather the unit is currently under performing a noise floor indication calibration.
1.3.6.1.4.1.12394.1.1.6.30.3ScalarbrzaccVLNoiseFloorLastFieldCalibrationResultread-onlycurrentApplicable to all units. Return the status of last calibration of Noise Floor Indication that was performed.
1.3.6.1.4.1.12394.1.1.6.30.4ScalarbrzaccVLNoiseFloorBandwidthUsedForLastFieldCalibrationread-onlycurrentApplicable to all units. Return the bandwidth used for last successful calibration of Noise Floor Indication.
1.3.6.1.4.1.12394.1.1.6.30.5ScalarbrzaccVLNoiseFloorAvailableCalibrationOptionsread-onlycurrentApplicable to all units. Indicates what types of Noise Floor Indication calibration are available: notCalibrated: means that the unit is not calibrated factory…
1.3.6.1.4.1.12394.1.1.6.30.6ScalarbrzaccVLNoiseFloorUseCalibrationread-writecurrentNot applicable to 900 MHz units. Select if the Noise Floor reported by the unit is using the calibration of Noise Floor Indication. The value that can be choos…
1.3.6.1.4.1.12394.1.1.6.31NodebrzaccVLInterferenceMitigationParameters
1.3.6.1.4.1.12394.1.1.6.31.1ScalarbrzaccVLInterferenceMitigationChannelScanPeriodread-writecurrentApplicable to 900 MHz units, 2.4 GHz units and BNB10. The period of time, in seconds, to stay on each channel to gather information, when performing Interferen…
1.3.6.1.4.1.12394.1.1.6.31.2ScalarbrzaccVLInterferenceMitigationAutomaticScanPeriodread-writecurrentApplicable to 900 MHz units, 2.4 GHz units and BNB10. The period of time, in minutes, to execute automatic channel scanning, when performing Interference Mitig…
1.3.6.1.4.1.12394.1.1.6.31.3ScalarbrzaccVLInterferenceMitigationScanTyperead-writecurrentApplicable to 900 MHz units, 2.4 GHz units and BNB10. The selected method for scanning, when performing Interference Mitigation.
1.3.6.1.4.1.12394.1.1.6.31.4ScalarbrzaccVLInterferenceMitigationScanModeread-writecurrentApplicable to 900 MHz units, 2.4 GHz units and BNB10. The selected Optimization Criteria to choose the best result, when performing Interference Mitigation: 1 …
1.3.6.1.4.1.12394.1.1.6.31.5ScalarbrzaccVLInterferenceMitigationDistanceread-writecurrentApplicable to 900 MHz units, 2.4 GHz units and BNB10. The desired value of Maximum Distance, utilized if Optimization Criteria is set to best distance, when pe…
1.3.6.1.4.1.12394.1.1.6.31.6ScalarbrzaccVLInterferenceMitigationThroughputread-writecurrentApplicable to 900 MHz units, 2.4 GHz units and BNB10. The desired value of Throughput, utilized if Optimization Criteria is set to best throughput, when perfor…
1.3.6.1.4.1.12394.1.1.6.31.8ScalarbrzaccVLInterferenceMitigationActivationread-writecurrentApplicable to 900 MHz units, 2.4 GHz units and BNB10. Activates Interference Mitigation, the unit is automatically reset upon activation.
1.3.6.1.4.1.12394.1.1.6.31.9ScalarbrzaccVLInterferenceMitigationStatusread-onlycurrentApplicable to 900 MHz units, 2.4 GHz units and BNB10. Defines whether the unit is currently performing an Interference Mitigation process. Value currentlyBlock…
1.3.6.1.4.1.12394.1.1.6.31.10ScalarbrzaccVLInterferenceMitigationDeleteStatisticsFileread-writecurrentApplicable to 900 MHz units, 2.4 GHz units and BNB10. Deletes the Interference Mitigation statistics file.
1.3.6.1.4.1.12394.1.1.6.31.11ScalarbrzaccVLInterferenceMitigationModelread-writecurrentApplicable to 900 MHz units, 2.4 GHz units and BNB10. Specifies the Installation Model used by the cell.
1.3.6.1.4.1.12394.1.1.6.31.12ScalarbrzaccVLInterferenceMitigationScanTimeread-onlycurrentApplicable to 900 MHz units, 2.4 GHz units and BNB10. Displays the estimated value of the scan time.
1.3.6.1.4.1.12394.1.1.6.31.13ScalarbrzaccVLInterferenceMitigationAUheightread-writecurrentApplicable to 900 MHz units, 2.4 GHz units and BNB10. The Base Station height used in determining the best noise floor in the Interference Mitigation algorithm…
1.3.6.1.4.1.12394.1.1.6.31.14ScalarbrzaccVLInterferenceMitigationAntennaGainread-writecurrentApplicable to 900 MHz units, 2.4 GHz units and BNB10. The Antenna Gain of the pair unit (AU/SU), expressed in dBi. Range: 10 - 17 dBi.
1.3.6.1.4.1.12394.1.1.6.31.15ScalarbrzaccVLInterferenceMitigationMaxModulationread-writecurrentApplicable to 900 MHz units, 2.4 GHz units and BNB10. The maximum modulation of the pair untit. Range: 1 - 8.
1.3.6.1.4.1.12394.1.1.6.31.16ScalarbrzaccVLInterferenceMitigationKeepLinkread-writecurrentApplicable to 900 MHz AU units, 2.4 GHz AU units and BNB10. Activates the KeepLink procedure in order to not lose SUs near the border of the cell
1.3.6.1.4.1.12394.1.1.6.31.17TablebrzaccVLInterferenceMitigationOutputTablenot-accessiblecurrentApplicable to 900 MHz units, 2.4 GHz units and BNB10. A table of Clear Channel Selection or Automatic Noise Floor Selection results.
1.3.6.1.4.1.12394.1.1.6.31.17.1RowbrzaccVLInterferenceMitigationOutputEntrynot-accessiblecurrentApplicable to 900 MHz units, 2.4 GHz units and BNB10. An entry in the InterferenceMitigationOutputTable.
1.3.6.1.4.1.12394.1.1.6.31.17.1.1ColumnbrzaccVLInterferenceMitigationOutputFrequencyread-onlycurrentApplicable to 900 MHz units, 2.4 GHz units and BNB10. The channel frequency
1.3.6.1.4.1.12394.1.1.6.31.17.1.2ColumnbrzaccVLInterferenceMitigationOutputScanningTyperead-onlycurrentApplicable to 900 MHz units, 2.4 GHz units and BNB10. Type of scan that was run
1.3.6.1.4.1.12394.1.1.6.31.17.1.3ColumnbrzaccVLInterferenceMitigationOutputInstallationModelread-onlycurrentApplicable to 900 MHz units, 2.4 GHz units and BNB10. Specifies the Installation Model used by the cell.
1.3.6.1.4.1.12394.1.1.6.31.17.1.4ColumnbrzaccVLInterferenceMitigationOutputNoiseFloorread-onlycurrentApplicable to 900 MHz units, 2.4 GHz units and BNB10. Noise floor calculated for current frequency
1.3.6.1.4.1.12394.1.1.6.31.17.1.5ColumnbrzaccVLInterferenceMitigationOutputDistanceread-onlycurrentApplicable to 900 MHz units, 2.4 GHz units and BNB10. Estimated cell radius
1.3.6.1.4.1.12394.1.1.6.31.17.1.6ColumnbrzaccVLInterferenceMitigationOutputPerformanceread-onlycurrentApplicable to 900 MHz units, 2.4 GHz units and BNB10. Estimated cell performance
1.3.6.1.4.1.12394.1.1.6.32ScalarbrzaccVLBeaconPeriodread-writecurrentApplicable only to AU VL. Range: 16-160 miliseconds.
1.3.6.1.4.1.12394.1.1.6.33ScalarbrzaccVLMaxBeaconsLostread-writecurrentApplicable only to AU VL. Range: 3-64.
1.3.6.1.4.1.12394.1.1.7NodebrzaccVLServiceParameters
1.3.6.1.4.1.12394.1.1.7.2ScalarbrzaccVLMirDownlinkread-writecurrentApplicable to SU/RB only. The Maximum Information Rate (MIR) from AU/BU to SU/RB. MIR must be above brzaccVLCirDownlink value. Range for set: 128 to 2,048 (Kbp…
1.3.6.1.4.1.12394.1.1.7.3ScalarbrzaccVLMirUplinkread-writecurrentApplicable to SU/RB only. The Maximum Information Rate (MIR) from SU/RB to AU/BU. MIR must be above brzaccVLCirUplink value. Range for set: 128 to 2,048 (Kbps)…
1.3.6.1.4.1.12394.1.1.7.4ScalarbrzaccVLCirDownlinkread-writecurrentApplicable to SU only. Not applicable to BreezeNET-B products. The Committed Information Rate (CIR) from AU to SU. CIR must be below brzaccVLMirDownlink value.…
1.3.6.1.4.1.12394.1.1.7.5ScalarbrzaccVLCirUplinkread-writecurrentApplicable to SU only. Not applicable to BreezeNET-B products. The Committed Information Rate (CIR) from SU to AU. CIR must be below brzaccVLMirUplink value. R…
1.3.6.1.4.1.12394.1.1.7.6ScalarbrzaccVLMaxDelayread-writecurrentApplicable to SU only. Not applicable to BreezeNET-B products. The maximal time packets may be delayed by the CIR\MIR mechanism. Above the configured maximal p…
1.3.6.1.4.1.12394.1.1.7.7ScalarbrzaccVLMaxBurstDurationread-writecurrentApplicable to all units. The maximum time during which inactivity bonus time can be accumulated for future burst transmissions. Range: 0 to 2000 milliseconds.
1.3.6.1.4.1.12394.1.1.7.8ScalarbrzaccVLGracefulDegradationLimitread-writecurrentApplicable to AU only. Not applicable to BreezeNET-B products. The maximum limit for activating the graceful degradation algorithm. Range: 0 to 70% rate of the…
1.3.6.1.4.1.12394.1.1.7.9ScalarbrzaccVLMirOnlyOptionread-writecurrentApplicable to AU only. Not applicable to BreezeNET-B products. When brzaccMirOnly is enabled, it overrides the CIR/MIR algorithm for determining actual informa…
1.3.6.1.4.1.12394.1.1.7.10NodebrzaccVLTrafficPrioritization
1.3.6.1.4.1.12394.1.1.7.10.1NodebrzaccVLTrafficPriVLAN
1.3.6.1.4.1.12394.1.1.7.10.1.1ScalarbrzaccVLVLANPriorityThresholdread-writecurrentApplicable to all units. If the VLAN Priority's value of the frame is less than or equal to this threshold the frame will get LOW priority, otherwise the frame…
1.3.6.1.4.1.12394.1.1.7.10.2NodebrzaccVLTrafficPriIPToS
1.3.6.1.4.1.12394.1.1.7.10.2.1ScalarbrzaccVLToSPrioritizationOptionread-writecurrentApplicable to all units. Disable/Enable IP ToS prioritization and choose the interpretation of the IP ToS field from IP header. ipPrecedence(2): The IP ToS fie…
1.3.6.1.4.1.12394.1.1.7.10.2.2ScalarbrzaccVLIPPrecedenceThresholdread-writecurrentApplicable to all units. The threshold of Precedence sub-field of IP ToS field from IP Header (RFC791) to be used when the ToS Prioritization Option is set to …
1.3.6.1.4.1.12394.1.1.7.10.2.3ScalarbrzaccVLIPDSCPThresholdread-writecurrentApplicable to all units. The threshold of DSCP sub-field of IP ToS field from IP Header (RFC2474) to be used when ToS Prioritization Option is set to DSCP. If …
1.3.6.1.4.1.12394.1.1.7.10.3NodebrzaccVLTrafficPriUdpTcpPortRange
1.3.6.1.4.1.12394.1.1.7.10.3.1ScalarbrzaccVLUdpTcpPortRangePrioritizationOptionread-writecurrentApplicable to all units. Disable/Enable Prioritization using UDP and/or TCP Port Ranges. udpOnly(2) : prioritization will be done only for UDP packets tcpOnly(…
1.3.6.1.4.1.12394.1.1.7.10.3.2NodebrzaccVLUdpPortRangeConfig
1.3.6.1.4.1.12394.1.1.7.10.3.2.1ScalarbrzaccVLUdpPortPriRTPRTCPread-writecurrentApplicale to all units. RTP/RTCP ports prioritization option for UDP packets. rtpANDrtcp(1): RTP and RTCP packets with destination port in the defined port ran…
1.3.6.1.4.1.12394.1.1.7.10.3.2.2ScalarbrzaccVLUdpPortRangeNumread-onlycurrentApplicable to all units. The number of entries in the UDP Port Range Table
1.3.6.1.4.1.12394.1.1.7.10.3.2.3TablebrzaccVLUdpPortRangeTablenot-accessiblecurrentApplicable to all units. A table of UDP port ranges use for prioritization. The user can define up to 64 ranges. An entry is empty if start is 65535 and end is…
1.3.6.1.4.1.12394.1.1.7.10.3.2.3.1RowbrzaccVLUdpPortRangeEntrynot-accessiblecurrentApplicable to all units. A UDP Port Ranges Table entry.
1.3.6.1.4.1.12394.1.1.7.10.3.2.3.1.1ColumnbrzaccVLUdpPortRangeStartread-onlycurrentApplicable to all units. Start port of an UDP Port Range
1.3.6.1.4.1.12394.1.1.7.10.3.2.3.1.2ColumnbrzaccVLUdpPortRangeEndread-onlycurrentApplicable to all units. End port of an UDP Port Range
1.3.6.1.4.1.12394.1.1.7.10.3.2.3.1.3ColumnbrzaccVLUdpPortRangeIdxread-onlycurrentApplicable to all units. UDP Port Range Entry's index
1.3.6.1.4.1.12394.1.1.7.10.3.2.4ScalarbrzaccVLUdpPortRangeAddread-writecurrentApplicable to all units. Add port range(s) to UDP Port Ranges Table. Get operation will return the empty string. A range is defined <start>-<end> or <start> wh…
1.3.6.1.4.1.12394.1.1.7.10.3.2.5ScalarbrzaccVLUdpPortRangeDeleteread-writecurrentApplicable to all units. Delete port range(s) from UDP Port Ranges Table. Get operation will return the empty string. A range is defined <start>-<end> or <star…
1.3.6.1.4.1.12394.1.1.7.10.3.2.6ScalarbrzaccVLUdpPortRangeDeleteAllread-writecurrentApplicable to all units. Delete all entries form UDP Port Ranges Table. Get operation will return 1
1.3.6.1.4.1.12394.1.1.7.10.3.3NodebrzaccVLTcpPortRangeConfig
1.3.6.1.4.1.12394.1.1.7.10.3.3.1ScalarbrzaccVLTcpPortPriRTPRTCPread-writecurrentApplicable to all units. RTP/RTCP ports prioritization option for TCP packets. rtpANDrtcp(1): RTP and RTCP packets with destination port in the defined port ra…
1.3.6.1.4.1.12394.1.1.7.10.3.3.2ScalarbrzaccVLTcpPortRangeNumread-onlycurrentApplicable to all units. The number of entries in the TCP Port Range Table
1.3.6.1.4.1.12394.1.1.7.10.3.3.3TablebrzaccVLTcpPortRangeTablenot-accessiblecurrentTable of TCP Port Ranges use for prioritization. The user can define up to 64 ranges. An entry is empty if start is 65535 and end is 0
1.3.6.1.4.1.12394.1.1.7.10.3.3.3.1RowbrzaccVLTcpPortRangeEntrynot-accessiblecurrentApplicable to all units. A TCP Port Ranges Table entry.
1.3.6.1.4.1.12394.1.1.7.10.3.3.3.1.1ColumnbrzaccVLTcpPortRangeStartread-onlycurrentApplicable to all units. Start port of a TCP Port Range
1.3.6.1.4.1.12394.1.1.7.10.3.3.3.1.2ColumnbrzaccVLTcpPortRangeEndread-onlycurrentApplicable to all units. End port of a TCP Port Range
1.3.6.1.4.1.12394.1.1.7.10.3.3.3.1.3ColumnbrzaccVLTcpPortRangeIdxread-onlycurrentApplicable to all units. TCP Port Range Entry's index
1.3.6.1.4.1.12394.1.1.7.10.3.3.4ScalarbrzaccVLTcpPortRangeAddread-writecurrentApplicable to all units. Add port range(s) to TCP Port Ranges Table. Get operation will return the empty string. A range is defined <start>-<end> or <start> wh…
1.3.6.1.4.1.12394.1.1.7.10.3.3.5ScalarbrzaccVLTcpPortRangeDeleteread-writecurrentApplicable to all units. Delete port range(s) from TCP Port Ranges Table. Get operation will return the empty string. A range is defined <start>-<end> or <star…
1.3.6.1.4.1.12394.1.1.7.10.3.3.6ScalarbrzaccVLTcpPortRangeDeleteAllread-writecurrentApplicable to all units. Delete all entries form TCP Port Ranges Table Get operation will return 1
1.3.6.1.4.1.12394.1.1.7.10.4NodebrzaccVLWirelessLinkPrioritization
1.3.6.1.4.1.12394.1.1.7.10.4.1ScalarbrzaccVLWirelessLinkPrioritizationOptionread-writecurrentApplicable only to AU with a license for the Wireless Link Prioritization feature and to BU-100. Enable/disable the traffic prioritization over the Wireless Li…
1.3.6.1.4.1.12394.1.1.7.10.4.2ScalarbrzaccVLlowPriorityAIFSread-writecurrentApplicable only to AU with a license for the Wireless Link Prioritization feature and to BU-100. Applicable only if the Wireless Link Prioritization Option is …
1.3.6.1.4.1.12394.1.1.7.10.4.3ScalarbrzaccVLHWRetriesHighPriorityread-writecurrentApplicable only to AU with a license for the Wireless Link Prioritization feature and to BU-100. Applicable only if the Wireless Link Prioritization Option is …
1.3.6.1.4.1.12394.1.1.7.10.4.4ScalarbrzaccVLHWRetriesLowPriorityread-writecurrentApplicable only to AU with a license for the Wireless Link Prioritization feature and to BU-100. Applicable only if the Wireless Link Prioritization Option is …
1.3.6.1.4.1.12394.1.1.7.10.4.5ScalarbrzaccVLAUBurstDurationHighPriorityread-writecurrentApplicable only to AU with a license for the Wireless Link Prioritization feature and to BU-100. Applicable only if the Wireless Link Prioritization Option is …
1.3.6.1.4.1.12394.1.1.7.10.4.6ScalarbrzaccVLAUBurstDurationLowPriorityread-writecurrentApplicable only to AU with a license for the Wireless Link Prioritization feature and to BU-100. Applicable only if the Wireless Link Prioritization Option is …
1.3.6.1.4.1.12394.1.1.7.10.4.7ScalarbrzaccVLSUBurstDurationHighPriorityread-writecurrentApplicable only to AU with a license for the Wireless Link Prioritization feature and to BU-100. Applicable only if the Wireless Link Prioritization Option is …
1.3.6.1.4.1.12394.1.1.7.10.4.8ScalarbrzaccVLSUBurstDurationLowPriorityread-writecurrentApplicable only to AU with a license for the Wireless Link Prioritization feature and to BU-100. Applicable only if the Wireless Link Prioritization Option is …
1.3.6.1.4.1.12394.1.1.7.10.5NodebrzaccVLTrafficPriIpRange
1.3.6.1.4.1.12394.1.1.7.10.5.1ScalarbrzaccVLTrafficPriIpRangeOptionread-writecurrentApplicable to all units. disable(1): Disable IP Range Prioritization. ipSource(2): Prioritization of the IP protocol packets with IP source address in range de…
1.3.6.1.4.1.12394.1.1.7.10.5.2ScalarbrzaccVLTrafficPriIpRangeIpAddressread-writecurrentApplicable to all units. Defines the IP Address for the IP Range Prioritization. IP protocol packets with IP source address in range defined by Address and Mas…
1.3.6.1.4.1.12394.1.1.7.10.5.3ScalarbrzaccVLTrafficPriIpRangeIpMaskread-writecurrentApplicable to all units. Defines the IP Mask for the IP Range Prioritization. IP protocol packets with IP source address in range defined by Address and Mask w…
1.3.6.1.4.1.12394.1.1.7.11NodebrzaccVLDrap
1.3.6.1.4.1.12394.1.1.7.11.1ScalarbrzaccVLDrapSupportread-writecurrentApplicable to AU. Not applicable to BreezeNET B products Disable/Enable the DRAP feature
1.3.6.1.4.1.12394.1.1.7.11.2ScalarbrzaccVLDrapUdpPortread-writecurrentApplicable to AU when DRAP support is enabled. Not applicable to BreezeNET B products. The UDP port used for the DRAP server
1.3.6.1.4.1.12394.1.1.7.11.3ScalarbrzaccVLDrapMaxNumberOfVoiceCallsread-writecurrentApplicable to AU when DRAP support is enabled. Not applicable to BreezeNET B products. The maximum number of voice calls that can be supported by the AU
1.3.6.1.4.1.12394.1.1.7.11.4ScalarbrzaccVLDrapTTLread-writecurrentApplicable to AU when DRAP support is enabled. Not applicable to BreezeNET B products. The maximum time between two allocation requests
1.3.6.1.4.1.12394.1.1.7.11.5ScalarbrzaccVLDrapNoOfActiveVoiceCallsread-onlycurrentApplicable to AU when DRAP support is enabled. Not applicable to BreezeNET B products. The current total number of active voice calls.
1.3.6.1.4.1.12394.1.1.7.12ScalarbrzaccVLLowPriorityTrafficMinimumPercentread-writecurrentThe minimum percent of the traffic rate that is allocated to the low priority traffic
1.3.6.1.4.1.12394.1.1.7.13ScalarbrzaccVLSUEZMirDownlinkread-writecurrentApplicable to AU only. The Maximum Information Rate (MIR) from AU to SU-EZ. Range for set: 128 to 12,032 (Kbps). The actual value (Get) will be the entered val…
1.3.6.1.4.1.12394.1.1.7.14ScalarbrzaccVLMIRThresholdPercentread-writecurrentApplicable to AU only. MIR Threshold Percent
1.3.6.1.4.1.12394.1.1.7.15NodebrzaccVLProportionalIRParameters
1.3.6.1.4.1.12394.1.1.7.15.1ScalarbrzaccVLProportionalIRFactorread-writecurrentApplicable to SU only. Proportional IR Factor (percentage). The weight used for computing the used MIR/CIR values.
1.3.6.1.4.1.12394.1.1.7.15.2ScalarbrzaccVLProportionalIRUpdatePeriodread-writecurrentApplicable to SU only. The period of time (in minutes) for periodical computation of used MIR/CIR values.
1.3.6.1.4.1.12394.1.1.7.15.3ScalarbrzaccVLProportionalIRThresholdPercentageread-writecurrentApplicable to SU only. When the difference between two consecutive calculations of used MIR/CIR value is bigger than this percentage from value, the new comput…
1.3.6.1.4.1.12394.1.1.7.15.4ScalarbrzaccVLProportionalIRThresholdRateread-writecurrentApplicable to SU only. The new computed MIR/CIR values will be considered only when the rate, on uplink or downlink respectively, is lower than the rate corres…
1.3.6.1.4.1.12394.1.1.8NodebrzaccVLUserFilterParams
1.3.6.1.4.1.12394.1.1.8.1ScalarbrzaccVLUserFilterOptionread-writecurrentApplicable to SU, RB and AU. Not applicable to AU on 900 MHz. Defines user-filtering options. disable: No filtering. iPOnly: Only IP protocol frames pass. user…
1.3.6.1.4.1.12394.1.1.8.2TablebrzaccVLIpFilterTablenot-accessiblecurrentStarting with version 5.0, this is deprecated. Use brzaccVLNewIpFilterTable instead. Applicable to SU, RB and AU. Not applicable to AU on 900 MHz. An IP Filter…
1.3.6.1.4.1.12394.1.1.8.2.1RowbrzaccVLIpFilterEntrynot-accessiblecurrentApplicable to SU, RB and AU. Not applicable to AU on 900 MHz. An IP Filter Table entry.
1.3.6.1.4.1.12394.1.1.8.2.1.1ColumnbrzaccVLIpIDread-writecurrentApplicable to SU, RB and AU. Not applicable to AU on 900 MHz. An IP address of an IP Filter Table entry.
1.3.6.1.4.1.12394.1.1.8.2.1.2ColumnbrzaccVLMaskIDread-writecurrentApplicable to SU, RB and AU. Not applicable to AU on 900 MHz. An IP Mask of an IP Filter Table entry. Either a mask or a range, but not both can be used to def…
1.3.6.1.4.1.12394.1.1.8.2.1.3ColumnbrzaccVLIpFilterRangeread-writecurrentApplicable to SU, RB and AU. Not applicable to AU on 900 MHz. An addresses range for the IP Filter Table entry. The first address in the range is the IP addres…
1.3.6.1.4.1.12394.1.1.8.2.1.4ColumnbrzaccVLIpFilterIdxread-onlycurrentApplicable to SU, RB and AU. Not applicable to AU on 900 MHz. A table index for the IP Filter Table entry.
1.3.6.1.4.1.12394.1.1.8.3ScalarbrzaccVLDeleteOneUserFilterread-writecurrentApplicable to SU/RB and AU-EZ only. Deletes a single selected entry from the IP Filter Table.
1.3.6.1.4.1.12394.1.1.8.4ScalarbrzaccVLDeleteAllUserFiltersread-writecurrentApplicable to SU, RB and AU. Not applicable to AU on 900 MHz. Deletes all entries from the IP Filter Table.
1.3.6.1.4.1.12394.1.1.8.5ScalarbrzaccVLDHCPUnicastOverrideFilterread-writecurrentApplicable to SU, RB and AU. Not applicable to AU on 900 MHz. Enables or disables the unicast DHCP messages, overriding the IP Filtering option.
1.3.6.1.4.1.12394.1.1.8.6TablebrzaccVLNewIpFilterTablenot-accessiblecurrentApplicable to SU, RB and AU. Not applicable to AU on 900 MHz. An IP Filter Table of up to 8 user defined addresses, or address groups, to be used if the select…
1.3.6.1.4.1.12394.1.1.8.6.1RowbrzaccVLNewIpFilterEntrynot-accessiblecurrentApplicable to SU, RB and AU. Not applicable to AU on 900 MHz. An IP Filter Table entry.
1.3.6.1.4.1.12394.1.1.8.6.1.1ColumnbrzaccVLNewIpIDread-onlycurrentApplicable to SU, RB and AU. Not applicable to AU on 900 MHz. An IP address of an IP Filter Table entry.
1.3.6.1.4.1.12394.1.1.8.6.1.2ColumnbrzaccVLNewMaskIDread-writecurrentApplicable to SU, RB and AU. Not applicable to AU on 900 MHz. An IP Mask of an IP Filter Table entry. Either a mask or a range, but not both can be used to def…
1.3.6.1.4.1.12394.1.1.8.6.1.3ColumnbrzaccVLNewIpFilterRangeread-writecurrentApplicable to SU, RB and AU. Not applicable to AU on 900 MHz. An addresses range for the IP Filter Table entry. The first address in the range is the IP addres…
1.3.6.1.4.1.12394.1.1.8.6.1.4ColumnbrzaccVLNewIpFilterCommandread-writecurrentApplicable to SU, RB and AU. Not applicable to AU on 900 MHz. Supports only active(1), createAndGo(4) and destroy(6). A command for the IP Filter Table entry.
1.3.6.1.4.1.12394.1.1.8.7ScalarbrzaccVLDHCPPPPoEOverrideFilterread-writecurrentApplicable to SU, RB and AU. Not applicable to AU on 900 MHz. Enables or disables the PPPoE messages, overriding the IP Filtering option.
1.3.6.1.4.1.12394.1.1.9NodebrzaccVLSecurityParameters
1.3.6.1.4.1.12394.1.1.9.1ScalarbrzaccVLAuthenticationAlgorithmread-writecurrentApplicable to all units. Enables/disables the authentication encryption option. openSystem: Authentication messages are not encrypted. sharedKey : Authenticati…
1.3.6.1.4.1.12394.1.1.9.2ScalarbrzaccVLSUDefaultKeyIDread-writecurrentApplicable to SU/RB only. The key to be used for encryption of authentication messages and/or data. Range: 1 to 4.
1.3.6.1.4.1.12394.1.1.9.3ScalarbrzaccVLDataEncryptionOptionread-writecurrentApplicable to all units. Enables/disables the data encryption option.
1.3.6.1.4.1.12394.1.1.9.4ScalarbrzaccVLAUDefaultMulticastKeyIDread-writecurrentApplicable to AU/BU only. The key to be used for encryption of multicasts and broadcasts.
1.3.6.1.4.1.12394.1.1.9.5ScalarbrzaccVLSecurityModeread-writecurrentApplicable to all units. The fips197 option is applicable only to units with a license to use FIPS 197 algorithm. The encryption algorithm to be used for authe…
1.3.6.1.4.1.12394.1.1.9.6ScalarbrzaccVLAuthenticationPromiscuousModeread-writecurrentApplicable to AU/BU only. Enables/disable the promiscuous mode allowing authentication of and communication with all SUs/RB regardless of their security parame…
1.3.6.1.4.1.12394.1.1.9.7ScalarbrzaccVLKey1read-writecurrentApplicable to all units. Key number 1. Accessible only with SNMP Write Community String (administrator password). Valid values: 32 hexadecimal digits.
1.3.6.1.4.1.12394.1.1.9.8ScalarbrzaccVLKey2read-writecurrentApplicable to all units. Key number 2. Accessible only with SNMP Write Community String (administrator password). Valid values: 32 hexadecimal digits.
1.3.6.1.4.1.12394.1.1.9.9ScalarbrzaccVLKey3read-writecurrentApplicable to all units. Key number 3. Accessible only with SNMP Write Community String (administrator password). Valid values: 32 hexadecimal digits.
1.3.6.1.4.1.12394.1.1.9.10ScalarbrzaccVLKey4read-writecurrentApplicable to all units. Key number 4. Accessible only with SNMP Write Community String (administrator password). Valid values: 32 hexadecimal digits.
1.3.6.1.4.1.12394.1.1.9.12ScalarbrzaccVLSecurityModeSupportread-onlycurrentApplicable to all units. Returns types of encryption that are supported. 0 - no encryption 1 - WEP 2 - AES OCB 3 - WEP and AES OCB 4 - FIPS-197 5 - FIPS-197 an…
1.3.6.1.4.1.12394.1.1.10NodebrzaccVLPerformanceParams
1.3.6.1.4.1.12394.1.1.10.1ScalarbrzaccVLRTSThresholdread-writecurrentApplicable to SU and AU. Not applicable to BreezeNET-B products. The minimum frame size that requires an RTS/CTS handshake. Range: For units bearing SW version…
1.3.6.1.4.1.12394.1.1.10.3ScalarbrzaccVLMinContentionWindowread-writecurrentApplicable to SU and AU. For units bearing SW version 4.0 and above applicable to BreezeNET-B products, for previous SW versions not applicable to BreezeNET-B …
1.3.6.1.4.1.12394.1.1.10.4ScalarbrzaccVLMaxContentionWindowread-writecurrentApplicable to SU and AU. For units bearing SW version 4.0 and above applicable to BreezeNET-B products, for previous SW versions not applicable to BreezeNET-B …
1.3.6.1.4.1.12394.1.1.10.5ScalarbrzaccVLMaximumModulationLevelread-writecurrentApplicable to all units. If the Adaptive Modulation algorithm is enabled, it sets the Maximum Modulation Level to be used. If The Modulation algorithm is disab…
1.3.6.1.4.1.12394.1.1.10.6ScalarbrzaccVLMulticastModulationLevelread-writecurrentApplicable to AU/BU only. The modulation level for multicast and broadcast data frames. The range is 1 to 8. 8 is not applicable for units with HW revision A.
1.3.6.1.4.1.12394.1.1.10.7ScalarbrzaccVLAvgSNRMemoryFactorread-writecurrentApplicable to all units. The weight of history in average SNR calculation. The higher is the value, the higher is the weight of history. Range: -1 (Disregard H…
1.3.6.1.4.1.12394.1.1.10.8ScalarbrzaccVLHardwareRetriesread-writecurrentApplicable to all units. Not applicable if Wireless Link Prioritization is enabled. The maximum number of trials to transmit an unacknowledged frame in each Ha…
1.3.6.1.4.1.12394.1.1.10.9NodebrzaccVLAdaptiveModulationParams
1.3.6.1.4.1.12394.1.1.10.9.1ScalarbrzaccVLAdaptiveModulationAlgorithmOptionread-writecurrentApplicable to all units. Enables/disables the adaptive modulation level decision mechanism.
1.3.6.1.4.1.12394.1.1.10.9.2ScalarbrzaccVLSoftwareRetrySupportread-writecurrentApplicable to all units. Read-only for units with version 2.0. Not applicable for units with SW version 3.0 and higher. The status of the Software Retry mechan…
1.3.6.1.4.1.12394.1.1.10.9.3ScalarbrzaccVLNumOfSoftwareRetriesread-writecurrentApplicable to all units. Read-only for units with version 2.0. Not applicable for units with SW version 3.0 and higher. The maximum number of times to use the …
1.3.6.1.4.1.12394.1.1.10.9.4ScalarbrzaccVLMinIntervalBetweenAdaptiveModulationAlgorithmMessagesread-writecurrentApplicable all units. The minimum interval between two consecutive AU/BU to SU/RB messages. Range: 1 to 3600 (Sec).
1.3.6.1.4.1.12394.1.1.10.9.5ScalarbrzaccVLAdaptiveModulationDecisionThresholdsread-writecurrentApplicable to all units. Defines the setting of thresholds for the rate decision algorithm. high (2) should typically be used when the SNR is lower than 13dB.
1.3.6.1.4.1.12394.1.1.10.9.7ScalarbrzaccVLAdaptiveModulationHistorySizeread-writecurrentApplicable to all units with HW version C or higher. This value is used to compute the transmission time. Not used in version 6.0 and higher.
1.3.6.1.4.1.12394.1.1.10.9.8ScalarbrzaccVLAdaptiveModulationPacketThresholdToTestUpRateread-writecurrentApplicable to all units with HW version C or higher. When the number of transmitted frames exceeds this number the upper modulations will be tested.
1.3.6.1.4.1.12394.1.1.10.9.9ScalarbrzaccVLAdaptiveModulationPacketNoOnUpperRateread-writecurrentApplicable to all units with HW version C or higher. The number of frames used on upper modulations.
1.3.6.1.4.1.12394.1.1.10.9.10ScalarbrzaccVLAdaptiveModulationAlgorithmread-writecurrentApplicable to all units with HW version C or higher. Defines the adaptive modulation algorithm used by the unit.
1.3.6.1.4.1.12394.1.1.10.9.11ScalarbrzaccVLAdaptiveModulationRetriesOnLowerModulationsread-writecurrentApplicable to all units with HW version C or higher. It allows retransmissions at lower modulation levels.
1.3.6.1.4.1.12394.1.1.10.9.12ScalarbrzaccVLAdaptiveModulationRTSDurationModeread-writecurrentApplicable to all units with HW version C or higher. It defines the mode to calculate the value for RTS duration field.
1.3.6.1.4.1.12394.1.1.10.10NodebrzaccVLBurstMode
1.3.6.1.4.1.12394.1.1.10.10.1ScalarbrzaccVLBurstModeOptionread-writecurrentApplicable to all units. Applicable only if Burst Mode Option is supported by country specific parameters of the Sub Band. Not applicable if Wireless Link Prio…
1.3.6.1.4.1.12394.1.1.10.10.2ScalarbrzaccVLBurstIntervalread-writecurrentApplicable to all units. Not applicable if Wireless Link Prioritization is enabled. Burst mode interval in milliseconds. Range: 1 to the maximum value as defin…
1.3.6.1.4.1.12394.1.1.10.11NodebrzaccVLConcatenationParameters
1.3.6.1.4.1.12394.1.1.10.11.1ScalarbrzaccVLConcatenationOptionread-writecurrentApplicable to all units. Defines the Concatenation option.
1.3.6.1.4.1.12394.1.1.10.11.2ScalarbrzaccVLConcatenationMaximumNumberOfFramesread-writecurrentApplicable to all units with SW version 3.X . Not applicable for version 4.0 and higher. Defines the maximum numbers of frames that can be concatenated. Range:…
1.3.6.1.4.1.12394.1.1.10.11.3ScalarbrzaccVLConcatenationMaxFrameSizeread-writecurrentApplicable to all units. Defines the maximum size of a concatenated frame. Range: 256 to 2200 (bytes) for BreezeNET-B products BU/RB14 BU/RB28, or for AU/SU wi…
1.3.6.1.4.1.12394.1.1.10.13ScalarbrzaccVLControlModulationLevelread-writecurrentApplicable to all units wits software version 6.0 and higher. The modulation level for control frames. basicRates(1) means the all control frames will be sent …
1.3.6.1.4.1.12394.1.1.10.14ScalarbrzaccVLEthernetFrameSizeread-writecurrentApplicable only for BNB-10 products. The maximum frame size used on Ethernet port.
1.3.6.1.4.1.12394.1.1.10.15ScalarbrzaccVLRunningEthernetFrameSizeread-onlycurrentApplicable only for BNB-10 products. The frame size used on Ethernet port.
1.3.6.1.4.1.12394.1.1.11NodebrzaccVLSiteSurvey
1.3.6.1.4.1.12394.1.1.11.1ScalarbrzaccVLAverageReceiveSNRread-onlycurrentApplicable to SU/RB only. The average Signal to Noise Ratio of received frames.
1.3.6.1.4.1.12394.1.1.11.2NodebrzaccVLTrafficStatistics
1.3.6.1.4.1.12394.1.1.11.2.1ScalarbrzaccVLResetTrafficCountersread-writecurrentApplicable to all units. Resets the traffic counters.
1.3.6.1.4.1.12394.1.1.11.2.2NodebrzaccVLEthCounters
1.3.6.1.4.1.12394.1.1.11.2.2.1ScalarbrzaccVLTotalRxFramesViaEthernetread-onlycurrentApplicable to all units. Total number of frames received via the Ethernet port.
1.3.6.1.4.1.12394.1.1.11.2.2.2ScalarbrzaccVLTxWirelessToEthernetread-onlycurrentApplicable to all units. Total number of frames transmitted to the Ethernet port.
1.3.6.1.4.1.12394.1.1.11.2.3NodebrzaccVLWirelessLinkCounters
1.3.6.1.4.1.12394.1.1.11.2.3.1NodebrzaccVLTxFramesToWireless
1.3.6.1.4.1.12394.1.1.11.2.3.1.1ScalarbrzaccVLAUBeaconsToWirelessread-onlycurrentApplicable to AU/BU only. The number of beacons transmitted to the wireless media.
1.3.6.1.4.1.12394.1.1.11.2.3.1.3ScalarbrzaccVLDataAndOtherMngFramesToWirelessread-onlycurrentApplicable to AU/BU only. The number of data and management frames transmitted to the wireless media. The count includes one count for each data frame transmit…
1.3.6.1.4.1.12394.1.1.11.2.3.1.4ScalarbrzaccVLTotalTxFramesToWirelessread-onlycurrentApplicable to all units. The number of frames transmitted to the wireless media. The count includes one count for each data frame that was transmitted successf…
1.3.6.1.4.1.12394.1.1.11.2.3.1.5ScalarbrzaccVLTotalTransmittedUnicastsread-onlycurrentApplicable to AU/BU only. The total number of unicast frames successfully transmitted to the wireless media, excluding retransmissions.
1.3.6.1.4.1.12394.1.1.11.2.3.1.6ScalarbrzaccVLTotalTransmittedConcatenatedFramesDoubleread-onlycurrentApplicable to all products. The total number of double concatenated frames successfully transmitted to the wireless media, excluding retransmissions.
1.3.6.1.4.1.12394.1.1.11.2.3.1.7ScalarbrzaccVLTotalTransmittedConcatenatedFramesSingleread-onlycurrentApplicable to all products. The total number of double concatenated frames successfully transmitted to the wireless media, excluding retransmissions.
1.3.6.1.4.1.12394.1.1.11.2.3.1.8ScalarbrzaccVLTotalTransmittedConcatenatedFramesMoreread-onlycurrentApplicable to all products. The total number of concatenated frames with more then two frames successfully transmitted to the wireless media, excluding retrans…
1.3.6.1.4.1.12394.1.1.11.2.3.2ScalarbrzaccVLTotalRxFramesFromWirelessread-onlycurrentApplicable to all units. The total number of frames that were received from the wireless media. The count includes data and control and management frames, incl…
1.3.6.1.4.1.12394.1.1.11.2.3.3ScalarbrzaccVLTotalRetransmittedFramesread-onlycurrentApplicable to all units. The total number of retransmissions of data frames (counts all unsuccessful transmissions/retransmissions).
1.3.6.1.4.1.12394.1.1.11.2.3.4ScalarbrzaccVLFramesDroppedread-onlycurrentApplicable to all units. The number of dropped frames. The frames that were retransmitted to the extent of the maximum allowed number of retransmissions withou…
1.3.6.1.4.1.12394.1.1.11.2.3.5NodebrzaccVLDataFramesSubmittedToBridge
1.3.6.1.4.1.12394.1.1.11.2.3.5.1ScalarbrzaccVLFramesSubmittedViaHighQueueread-onlycurrentApplicable to all units. Frames submitted to the internal bridge via the High priority queue. for transmission to the wireless media.
1.3.6.1.4.1.12394.1.1.11.2.3.5.2ScalarbrzaccVLFramesSubmittedViaMidQueueread-onlycurrentApplicable to all units. Frames submitted to the internal bridge via the Mid priority queue for transmission to the wireless media.
1.3.6.1.4.1.12394.1.1.11.2.3.5.3ScalarbrzaccVLFramesSubmittedViaLowQueueread-onlycurrentApplicable to all units. Frames submitted to the internal bridge via the Low priority queue for transmission to the wireless media.
1.3.6.1.4.1.12394.1.1.11.2.3.5.4ScalarbrzaccVLTotalNoOfDataFramesSubmittedread-onlycurrentApplicable to all units. The total number of data frames submitted to the internal bridge for transmission to the wireless media.
1.3.6.1.4.1.12394.1.1.11.2.3.6ScalarbrzaccVLTotalRecievedDataFramesread-onlycurrentApplicable to all units. The total number of data frames received from the wireless media, including duplicate frames.
1.3.6.1.4.1.12394.1.1.11.2.3.7ScalarbrzaccVLRecievedBadFramesread-onlycurrentApplicable to all units. The number of frames received from the wireless media with errors (CRC errors).
1.3.6.1.4.1.12394.1.1.11.2.3.8ScalarbrzaccVLNoOfDuplicateFramesDiscardedread-onlycurrentApplicable to all units. The number of frames discarded due to receiving multiple copies.
1.3.6.1.4.1.12394.1.1.11.2.3.9ScalarbrzaccVLNoOfInternallyDiscardedMirCirread-onlycurrentApplicable to all units. The number of data frames received from the Ethernet port that were discarded by the MIR/CIR mechanism either to avoid exceeding the m…
1.3.6.1.4.1.12394.1.1.11.2.3.10ScalarbrzaccVLTotalRxConcatenatedFramesDoubleread-onlycurrentApplicable to all units. The total number of double concatenated frames received from the wireless media, including duplicate frames.
1.3.6.1.4.1.12394.1.1.11.2.3.11ScalarbrzaccVLTotalRxConcatenatedFramesSingleread-onlycurrentApplicable to all units. The total number of data fast frames single concatenated frames received from the wireless media, including duplicate frames.
1.3.6.1.4.1.12394.1.1.11.2.3.12ScalarbrzaccVLTotalRxConcatenatedFramesMoreread-onlycurrentApplicable to all units. The total number of data fast frames concatenated with more then two frames received from the wireless media, including duplicate fram…
1.3.6.1.4.1.12394.1.1.11.2.3.13ScalarbrzaccVLTXRetransmissionPercentageread-onlycurrentApplicable to all units. Indicates the percentage of frames that have been retransmitted.
1.3.6.1.4.1.12394.1.1.11.2.3.14ScalarbrzaccVLRXCRCPercentageread-onlycurrentApplicable to all units. Indicates the percentage of received frames with CRC error.
1.3.6.1.4.1.12394.1.1.11.2.4NodebrzaccVLWirelessLinkEvents
1.3.6.1.4.1.12394.1.1.11.2.4.1NodebrzaccVLTxEvents
1.3.6.1.4.1.12394.1.1.11.2.4.1.1ScalarbrzaccVLDroppedFrameEventsread-onlycurrentApplicable to all units. The number of frames that were dropped because they were retransmitted to the maximum allowed number of retransmissions without being …
1.3.6.1.4.1.12394.1.1.11.2.4.1.2ScalarbrzaccVLFramesDelayedDueToSwRetryread-onlycurrentApplicable to all units. Not applicable for units with SW Version 3.0 and higher. The number of frames that were delayed because the SW retry algorithm was act…
1.3.6.1.4.1.12394.1.1.11.2.4.1.3ScalarbrzaccVLUnderrunEventsread-onlycurrentApplicable to all units. The number of frames whose transmission was aborted because the rate of submitting frames for transmission exceeded the available tran…
1.3.6.1.4.1.12394.1.1.11.2.4.1.4ScalarbrzaccVLOthersTxEventsread-onlycurrentApplicable to all units. The number of Tx events due to problems other than those of the other Tx Events counters.
1.3.6.1.4.1.12394.1.1.11.2.4.1.5ScalarbrzaccVLTotalTxEventsread-onlycurrentApplicable to all units. The total number of Tx special events.
1.3.6.1.4.1.12394.1.1.11.2.4.2NodebrzaccVLRxEvents
1.3.6.1.4.1.12394.1.1.11.2.4.2.1ScalarbrzaccVLPhyErrorsread-onlycurrentApplicable to all units, only when DFS is enabled. The number of unidentified signals.
1.3.6.1.4.1.12394.1.1.11.2.4.2.2ScalarbrzaccVLCRCErrorsread-onlycurrentApplicable to all units. The number of frames received from the wireless media containing CRC errors.
1.3.6.1.4.1.12394.1.1.11.2.4.2.3ScalarbrzaccVLOverrunEventsread-onlycurrentApplicable to all units. The number of frames that were discarded because the receive rate exceeded the processing capability or the capacity of the Ethernet p…
1.3.6.1.4.1.12394.1.1.11.2.4.2.4ScalarbrzaccVLRxDecryptEventsread-onlycurrentApplicable to all units. The number of frames that were not received properly due to a problem in the data decryption mechanism.
1.3.6.1.4.1.12394.1.1.11.2.4.2.5ScalarbrzaccVLTotalRxEventsread-onlycurrentApplicable to all units. The total number of Rx special events.
1.3.6.1.4.1.12394.1.1.11.2.5NodebrzaccVLPerModulationLevelCounters
1.3.6.1.4.1.12394.1.1.11.2.5.1ScalarbrzaccVLResetPerModulationLevelCountersread-writecurrentApplicable to all units. Resets the per-Modulation Level counters .
1.3.6.1.4.1.12394.1.1.11.2.5.2TablebrzaccVLSUPerModulationLevelCountersTablenot-accessiblecurrentApplicable to SU/RB. Per Rate Counters table.
1.3.6.1.4.1.12394.1.1.11.2.5.2.1RowbrzaccVLSUPerModulationLevelCountersEntrynot-accessiblecurrentApplicable to SU/RB. An entry in the Per modulation Counters table.
1.3.6.1.4.1.12394.1.1.11.2.5.2.1.1ColumnbrzaccVLSUPerModulationLevelCountersTableIdxread-onlycurrentApplicable to SU/RB. An index of an entry in the Per modulation level Counters table.
1.3.6.1.4.1.12394.1.1.11.2.5.2.1.2ColumnbrzaccVLSUPerModulationLevelCountersApplicableModLevelread-onlycurrentApplicable to SU/RB. The applicable modulation level of the entry in the Per modulation level Counters table. Modulation Level 8 is not applicable for units wi…
1.3.6.1.4.1.12394.1.1.11.2.5.2.1.3ColumnbrzaccVLSUPerModulationLevelCountersTxSuccessread-onlycurrentApplicable to SU/RB. The total number of successfully transmitted unicasts at the applicable modulation level.
1.3.6.1.4.1.12394.1.1.11.2.5.2.1.4ColumnbrzaccVLSUPerModulationLevelCountersTxFailedread-onlycurrentApplicable to SU/RB. The total number of dropped frames at the applicable Modulation Level.
1.3.6.1.4.1.12394.1.1.11.2.5.3ScalarbrzaccVLAverageModulationLevelread-onlycurrentApplicable to SU/RB. The average modulation level for successful transmission (rounded to nearest integer) since last reset of the Per Modulation Level counter…
1.3.6.1.4.1.12394.1.1.11.5NodebrzaccVLMacAddressDatabase
1.3.6.1.4.1.12394.1.1.11.5.1NodebrzaccVLAUMacAddressDatabase
1.3.6.1.4.1.12394.1.1.11.5.1.1ScalarbrzaccVLAUAdbResetAllModulationLevelCountersread-writecurrentApplicable to AU/BU only. To reset all the counters for all SUs/RB in the MAC Address Database.
1.3.6.1.4.1.12394.1.1.11.5.1.2TablebrzaccVLAUAdbTablenot-accessiblecurrentApplicable to AU/BU only. AU/BU MAC Address Database table.
1.3.6.1.4.1.12394.1.1.11.5.1.2.1RowbrzaccVLAUAdbEntrynot-accessiblecurrentApplicable to AU/BU only. An entry in the AU/BU MAC Address Database table.
1.3.6.1.4.1.12394.1.1.11.5.1.2.1.1ColumnbrzaccVLAdbIndexread-onlycurrentApplicable to AU/BU only. The index of an entry in the AU/BU MAC Address Database table.
1.3.6.1.4.1.12394.1.1.11.5.1.2.1.2ColumnbrzaccVLAdbMacAddressread-onlycurrentApplicable to AU/BU only. The MAC Address of an SU/RB entry in the MAC Address Database table.
1.3.6.1.4.1.12394.1.1.11.5.1.2.1.3ColumnbrzaccVLAdbStatusread-onlycurrentApplicable to AU/BU only. The status of the relevant SU/RB.
1.3.6.1.4.1.12394.1.1.11.5.1.2.1.4ColumnbrzaccVLAdbSwVersionread-onlycurrentApplicable to AU/BU only. The SW version of the relevant SU/RB. Not available for SU-EZ.
1.3.6.1.4.1.12394.1.1.11.5.1.2.1.5ColumnbrzaccVLAdbSNRread-onlycurrentApplicable to AU/BU only. The average Signal to Noise Ratio in dB of frames received by the AU/BU from the relevant SU/RB.
1.3.6.1.4.1.12394.1.1.11.5.1.2.1.6ColumnbrzaccVLAdbMaxModulationLevelread-onlycurrentApplicable to AU/BU only. The value configured in the relevant SU/RB for the Maximum Modulation Level parameter. Modulation Level 8 is not applicable for units…
1.3.6.1.4.1.12394.1.1.11.5.1.2.1.7ColumnbrzaccVLAdbTxFramesTotalread-onlycurrentApplicable to AU/BU only. Counts the total number of unicast frames (excluding retransmissions) that were successfully transmitted to the SU/RB over the wirele…
1.3.6.1.4.1.12394.1.1.11.5.1.2.1.8ColumnbrzaccVLAdbDroppedFramesTotalread-onlycurrentApplicable to AU/BU only. Counts the total number of frames intended to the SU/RB that were dropped because they were retransmitted to the extent of the maximu…
1.3.6.1.4.1.12394.1.1.11.5.1.2.1.9ColumnbrzaccVLAdbTxSuccessModLevel1read-onlycurrentApplicable to AU/BU only. Counts the total number of unicast frames (excluding retransmissions) that were successfully transmitted to the SU/RB over the wirele…
1.3.6.1.4.1.12394.1.1.11.5.1.2.1.10ColumnbrzaccVLAdbTxSuccessModLevel2read-onlycurrentApplicable to AU/BU only. Counts the total number of unicast frames (excluding retransmissions) that were successfully transmitted to the SU/RB over the wirele…
1.3.6.1.4.1.12394.1.1.11.5.1.2.1.11ColumnbrzaccVLAdbTxSuccessModLevel3read-onlycurrentApplicable to AU/BU only. Counts the total number of unicast frames (excluding retransmissions) that were successfully transmitted to the SU/BU over the wirele…
1.3.6.1.4.1.12394.1.1.11.5.1.2.1.12ColumnbrzaccVLAdbTxSuccessModLevel4read-onlycurrentApplicable to AU/BU only. Counts the total number of unicast frames (excluding retransmissions) that were successfully transmitted to the SU/RB over the wirele…
1.3.6.1.4.1.12394.1.1.11.5.1.2.1.13ColumnbrzaccVLAdbTxSuccessModLevel5read-onlycurrentApplicable to AU/BU only. Counts the total number of unicast frames (excluding retransmissions) that were successfully transmitted to the SU/RB over the wirele…
1.3.6.1.4.1.12394.1.1.11.5.1.2.1.14ColumnbrzaccVLAdbTxSuccessModLevel6read-onlycurrentApplicable to AU/BU only. Counts the total number of unicast frames (excluding retransmissions) that were successfully transmitted to the SU/BU over the wirele…
1.3.6.1.4.1.12394.1.1.11.5.1.2.1.15ColumnbrzaccVLAdbTxSuccessModLevel7read-onlycurrentApplicable to AU/BU only. Counts the total number of unicast frames (excluding retransmissions) that were successfully transmitted to the SU/RB over the wirele…
1.3.6.1.4.1.12394.1.1.11.5.1.2.1.16ColumnbrzaccVLAdbTxSuccessModLevel8read-onlycurrentApplicable to AU/BU only. Counts the total number of unicast frames (excluding retransmissions) that were successfully transmitted to the SU/RB over the wirele…
1.3.6.1.4.1.12394.1.1.11.5.1.2.1.17ColumnbrzaccVLAdbTxFailedModLevel1read-onlycurrentApplicable to AU/BU only. Counts the total number of failures to successfully transmit unicast frames intended to the SU/RB using modulation level 1.
1.3.6.1.4.1.12394.1.1.11.5.1.2.1.18ColumnbrzaccVLAdbTxFailedModLevel2read-onlycurrentApplicable to AU/BU only. Counts the total number of failures to successfully transmit unicast frames intended to the SU/RB using modulation level 2.
1.3.6.1.4.1.12394.1.1.11.5.1.2.1.19ColumnbrzaccVLAdbTxFailedModLevel3read-onlycurrentApplicable to AU/BU only. Counts the total number of failures to successfully transmit unicast frames intended to the SU/RB using modulation level 3.
1.3.6.1.4.1.12394.1.1.11.5.1.2.1.20ColumnbrzaccVLAdbTxFailedModLevel4read-onlycurrentApplicable to AU/BU only. Counts the total number of failures to successfully transmit unicast frames intended to the SU/RB using modulation level 4.
1.3.6.1.4.1.12394.1.1.11.5.1.2.1.21ColumnbrzaccVLAdbTxFailedModLevel5read-onlycurrentApplicable to AU/BU only. Counts the total number of failures to successfully transmit unicast frames intended to the SU/RB using modulation level 5.
1.3.6.1.4.1.12394.1.1.11.5.1.2.1.22ColumnbrzaccVLAdbTxFailedModLevel6read-onlycurrentApplicable to AU/BU only. Counts the total number of failures to successfully transmit unicast frames intended to the SU/RB using modulation level 6.
1.3.6.1.4.1.12394.1.1.11.5.1.2.1.23ColumnbrzaccVLAdbTxFailedModLevel7read-onlycurrentApplicable to AU/BU only. Counts the total number of failures to successfully transmit unicast frames intended to the SU/RB using modulation level 7.
1.3.6.1.4.1.12394.1.1.11.5.1.2.1.24ColumnbrzaccVLAdbTxFailedModLevel8read-onlycurrentApplicable to AU/BU only. Counts the total number of failures to successfully transmit unicast frames intended to the SU/RB using modulation level 8. Not appli…
1.3.6.1.4.1.12394.1.1.11.5.1.2.1.25ColumnbrzaccVLAdbCirTxread-onlycurrentApplicable to AU Only. Not applicable to BreezeNET-B products. This parameter is not relevant for SU-EZ with SW 1.00.15 and it is 0. The value configured in th…
1.3.6.1.4.1.12394.1.1.11.5.1.2.1.26ColumnbrzaccVLAdbMirTxread-onlycurrentApplicable to AU/BU only. The value configured in the relevant SU/RB for the MIR: SU/RB to AU/BU parameter. For SU-EZ SW version 1.00.15, it represents the val…
1.3.6.1.4.1.12394.1.1.11.5.1.2.1.27ColumnbrzaccVLAdbCirRxread-onlycurrentApplicable to AU Only. Not applicable to BreezeNET-B products. This parameter is not relevant for SU-EZ with SW version 1.00.15 and it is 0. The value configur…
1.3.6.1.4.1.12394.1.1.11.5.1.2.1.28ColumnbrzaccVLAdbMirRxread-onlycurrentApplicable to AU/BU only. This parameter is not relevant for SU-EZ with SW version 1.00.15 and it is 0. The value configured in the relevant SU/RB for the MIR:…
1.3.6.1.4.1.12394.1.1.11.5.1.2.1.29ColumnbrzaccVLAdbCirMaxDelayread-onlycurrentApplicable to AU Only. Not applicable to BreezeNET-B products. The value configured in the relevant SU for the CIR Maximum Delay parameter. It returns maximum …
1.3.6.1.4.1.12394.1.1.11.5.1.2.1.30ColumnbrzaccVLAdbDistanceread-onlycurrentApplicable to AU/BU Only. The distance between the SU/RB and the AU/BU (In Kilometers). It is not applicable for SU-EZ and it returns 0.
1.3.6.1.4.1.12394.1.1.11.5.1.2.1.31ColumnbrzaccVLAdbHwRevisionread-onlycurrentApplicable to AU/BU Only. The SU/RB HW Revision. Not available for SU-EZ.
1.3.6.1.4.1.12394.1.1.11.5.1.2.1.32ColumnbrzaccVLAdbCpldVerread-onlycurrentApplicable to AU/BU Only. The SU/RB CPLD Version. Not available for SU-EZ.
1.3.6.1.4.1.12394.1.1.11.5.1.2.1.33ColumnbrzaccVLAdbCountryCoderead-onlycurrentApplicable to AU/BU Only. The SU/RB country code. 9999 means unavailable country code.
1.3.6.1.4.1.12394.1.1.11.5.1.2.1.34ColumnbrzaccVLAdbBootVerread-onlycurrentApplicable to AU/BU Only. The SU/RB Boot Version. Not available for SU-EZ.
1.3.6.1.4.1.12394.1.1.11.5.1.2.1.35ColumnbrzaccVLAdbAtpcOptionread-onlycurrentApplicable to AU/BU Only. The SU/RB ATPC option configuration.
1.3.6.1.4.1.12394.1.1.11.5.1.2.1.36ColumnbrzaccVLAdbAdapModOptionread-onlycurrentApplicable to AU/BU Only. The SU/RB adaptive modulation option configuration. It is not applicable for SU-EZ.
1.3.6.1.4.1.12394.1.1.11.5.1.2.1.37ColumnbrzaccVLAdbBurstModeOptionread-onlycurrentApplicable to AU/BU Only. The SU/RB burst mode option configuration. It is not applicable for SU-EZ.
1.3.6.1.4.1.12394.1.1.11.5.1.2.1.39ColumnbrzaccVLAdbConcatenationOptionread-onlycurrentApplicable to AU/BU Only. The SU/RB concatenation option configuration. It is not applicable for SU-EZ.
1.3.6.1.4.1.12394.1.1.11.5.1.2.1.41ColumnbrzaccVLAdbSecurityModeread-onlycurrentApplicable to AU/BU Only. The SU/RB security mode configuration. Not available for SU-EZ.
1.3.6.1.4.1.12394.1.1.11.5.1.2.1.42ColumnbrzaccVLAdbAuthOptionread-onlycurrentApplicable to AU/BU Only. The SU/RB authentication algorithm configuration. Not available for SU-EZ.
1.3.6.1.4.1.12394.1.1.11.5.1.2.1.43ColumnbrzaccVLAdbDataEncyptOptionread-onlycurrentApplicable to AU/BU Only. The SU/RB data encryption option configuration. Not available for SU-EZ.
1.3.6.1.4.1.12394.1.1.11.5.1.2.1.44ColumnbrzaccVLAdbAgeread-onlycurrentApplicable to AU/BU only. The time since any packet was received from the relevant SU/RB.
1.3.6.1.4.1.12394.1.1.11.5.1.2.1.45ColumnbrzaccVLAdbUnitNameread-onlycurrentApplicable to AU/BU only. The unit name of the relevant SU/RB. Not available for SU-EZ.
1.3.6.1.4.1.12394.1.1.11.5.1.2.1.46ColumnbrzaccVLAdbRSSIread-onlycurrentApplicable to AU/BU only with SW version 5.1 and higher. The average Received Signal Strength Indication of frames received by the AU/BU from the relevant SU/R…
1.3.6.1.4.1.12394.1.1.11.5.1.2.1.47ColumnbrzaccVLAdbIpAddressread-onlycurrentApplicable to AU/BU only with SW version 5.2.11 and higher. The Running IP address of the relevant SU/RB. Not available for SU-EZ with SW version lower than 1.…
1.3.6.1.4.1.12394.1.1.11.5.1.3TablebrzaccVLAUNewAdbTablenot-accessiblecurrentApplicable to AU/BU only with SW version 5.0 and higher. AU/BU MAC Address New Database table idexed by MAC Address
1.3.6.1.4.1.12394.1.1.11.5.1.3.1RowbrzaccVLAUNewAdbEntrynot-accessiblecurrentApplicable to AU/BU only with SW version 5.0 and higher. An entry in the AU/BU MAC Address New Database table.
1.3.6.1.4.1.12394.1.1.11.5.1.3.1.1ColumnbrzaccVLNewAdbMacAddressread-onlycurrentApplicable to AU/BU only with SW version 5.0 and higher. The MAC Address of an SU/RB entry in the MAC Address Database table.
1.3.6.1.4.1.12394.1.1.11.5.1.3.1.2ColumnbrzaccVLNewAdbIPaddressread-onlycurrentApplicable to AU/BU only with SW version 5.0 and higher. The Running IP address of the relevant SU/RB. Not available for SU-EZ with SW version lower than 1.1.1
1.3.6.1.4.1.12394.1.1.11.5.1.3.1.3ColumnbrzaccVLNewAdbUnitNameread-onlycurrentApplicable to AU/BU only with SW version 5.0 and higher. The unit name of the relevant SU/RB. Not available for SU-EZ.
1.3.6.1.4.1.12394.1.1.11.5.1.3.1.4ColumnbrzaccVLNewAdbUnitTyperead-onlycurrentApplicable to AU/BU only with SW version 5.0 and higher. The type of the relevant SU/RB. su-6-1D (3) : SU-6-1D (subscriber unit supporting 6 Mbps) Starting wit…
1.3.6.1.4.1.12394.1.1.11.5.1.3.1.5ColumnbrzaccVLNewAdbSwVersionread-onlycurrentApplicable to AU/BU only with SW version 5.0 and higher. The SW version of the relevant SU/RB. Not available for SU-EZ.
1.3.6.1.4.1.12394.1.1.11.5.1.3.1.6ColumnbrzaccVLNewAdbHwRevisionread-onlycurrentApplicable to AU/BU only with SW version 5.0 and higher. The SU/RB HW Revision. Not available for SU-EZ.
1.3.6.1.4.1.12394.1.1.11.5.1.3.1.7ColumnbrzaccVLNewAdbCpldVerread-onlycurrentApplicable to AU/BU only with SW version 5.0 and higher. The SU/RB CPLD Version. Not available for SU-EZ.
1.3.6.1.4.1.12394.1.1.11.5.1.3.1.8ColumnbrzaccVLNewAdbBootVerread-onlycurrentApplicable to AU/BU only with SW version 5.0 and higher. The SU/RB Boot Version. Not available for SU-EZ.
1.3.6.1.4.1.12394.1.1.11.5.1.3.1.9ColumnbrzaccVLNewAdbCountryCoderead-onlycurrentApplicable to AU/BU only with SW version 5.0 and higher. The SU/RB country code. 9999 means unavailable country code
1.3.6.1.4.1.12394.1.1.11.5.1.3.1.10ColumnbrzaccVLNewAdbCirTxread-onlycurrentApplicable to AU/BU only with SW version 5.0 and higher. For BreezeNET-B products it is 0. For SU_EZ with SW version 1.00.15 is not relevant and it is 0. The v…
1.3.6.1.4.1.12394.1.1.11.5.1.3.1.11ColumnbrzaccVLNewAdbMirTxread-onlycurrentApplicable to AU/BU only with SW version 5.0 and higher. The value configured in the relevant SU/RB for the MIR: SU/RB to AU/BU parameter. For SU-EZ SW version…
1.3.6.1.4.1.12394.1.1.11.5.1.3.1.12ColumnbrzaccVLNewAdbCirRxread-onlycurrentApplicable to AU/BU only with SW version 5.0 and higher. For BreezeNET-B products it is 0. This parameter is not relevant for SU-EZ with version 1.00.15 and it…
1.3.6.1.4.1.12394.1.1.11.5.1.3.1.13ColumnbrzaccVLNewAdbMirRxread-onlycurrentApplicable to AU/BU only with SW version 5.0 and higher. This parameter is not relevant for SU-EZ with version 1.00.15 and it is 0. The value configured in the…
1.3.6.1.4.1.12394.1.1.11.5.1.3.1.14ColumnbrzaccVLNewAdbCirMaxDelayread-onlycurrentApplicable to AU/BU only with SW version 5.0 and higher. For BreezeNET-B products and SU-EZ with SW version 1.00.15 it is not relevant. The value configured in…
1.3.6.1.4.1.12394.1.1.11.5.1.3.1.15ColumnbrzaccVLNewAdbAtpcOptionread-onlycurrentApplicable to AU/BU only with SW version 5.0 and higher. The SU/RB ATPC option configuration.
1.3.6.1.4.1.12394.1.1.11.5.1.3.1.16ColumnbrzaccVLNewAdbAdapModOptionread-onlycurrentApplicable to AU/BU only with SW version 5.0 and higher. The SU/RB adaptive modulation option configuration. It is not applicable for SU-EZ.
1.3.6.1.4.1.12394.1.1.11.5.1.3.1.17ColumnbrzaccVLNewAdbBurstModeOptionread-onlycurrentApplicable to AU/BU only with SW version 5.0 and higher. The SU/RB burst mode option configuration. It is not applicable for SU-EZ.
1.3.6.1.4.1.12394.1.1.11.5.1.3.1.18ColumnbrzaccVLNewAdbConcatenationOptionread-onlycurrentApplicable to AU/BU only with SW version 5.0 and higher. The SU/RB concatenation option configuration. It is not applicable for SU-EZ.
1.3.6.1.4.1.12394.1.1.11.5.1.3.1.19ColumnbrzaccVLNewAdbSecurityModeread-onlycurrentApplicable to AU/BU only with SW version 5.0 and higher. The SU/RB security mode configuration. Not available for SU-EZ.
1.3.6.1.4.1.12394.1.1.11.5.1.3.1.20ColumnbrzaccVLNewAdbAuthOptionread-onlycurrentApplicable to AU/BU only with SW version 5.0 and higher. The SU/RB authentication algorithm configuration. Not available for SU-EZ.
1.3.6.1.4.1.12394.1.1.11.5.1.3.1.21ColumnbrzaccVLNewAdbDataEncyptOptionread-onlycurrentApplicable to AU/BU only with SW version 5.0 and higher. The SU/RB data encryption option configuration. Not available for SU-EZ.
1.3.6.1.4.1.12394.1.1.11.5.1.3.1.22ColumnbrzaccVLAdbWi2IPaddressread-onlycurrentApplicable to AU/BU only with SW version 5.0 and higher. The IP address of the Wi2 Access Point. Not available for SU-EZ.
1.3.6.1.4.1.12394.1.1.11.5.1.3.1.23ColumnbrzaccVLNewAdbStatusread-onlycurrentApplicable to AU/BU only with SW version 5.0 and higher. The status of the relevant SU/RB.
1.3.6.1.4.1.12394.1.1.11.5.1.3.1.24ColumnbrzaccVLNewAdbAgeread-onlycurrentApplicable to AU/BU only with SW version 5.0 and higher. The time since any packet was received from the relevant SU/RB.
1.3.6.1.4.1.12394.1.1.11.5.1.3.1.25ColumnbrzaccVLNewAdbDistanceread-onlycurrentApplicable to AU/BU only with SW version 5.0 and higher. The distance between the SU/RB and the AU/BU (In Kilometers). It is not applicable for SU-EZ and it re…
1.3.6.1.4.1.12394.1.1.11.5.1.3.1.26ColumnbrzaccVLNewAdbSNRread-onlycurrentApplicable to AU/BU only with SW version 5.0 and higher. The average Signal to Noise Ratio in dB of frames received by the AU/BU from the relevant SU/RB.
1.3.6.1.4.1.12394.1.1.11.5.1.3.1.27ColumnbrzaccVLNewAdbMaxModulationLevelread-onlycurrentApplicable to AU/BU only with SW version 5.0 and higher. The value configured in the relevant SU/RB for the Maximum Modulation Level parameter. Modulation Leve…
1.3.6.1.4.1.12394.1.1.11.5.1.3.1.28ColumnbrzaccVLNewAdbTxFramesTotalread-onlycurrentApplicable to AU/BU only with SW version 5.0 and higher. Counts the total number of unicast frames (excluding retransmissions) that were successfully transmitt…
1.3.6.1.4.1.12394.1.1.11.5.1.3.1.29ColumnbrzaccVLNewAdbDroppedFramesTotalread-onlycurrentApplicable to AU/BU only with SW version 5.0 and higher. Counts the total number of frames intended to the SU/RB that were dropped because they were retransmit…
1.3.6.1.4.1.12394.1.1.11.5.1.3.1.30ColumnbrzaccVLNewAdbTxSuccessModLevel1read-onlycurrentApplicable to AU/BU only with SW version 5.0 and higher. Counts the total number of unicast frames (excluding retransmissions) that were successfully transmitt…
1.3.6.1.4.1.12394.1.1.11.5.1.3.1.31ColumnbrzaccVLNewAdbTxSuccessModLevel2read-onlycurrentApplicable to AU/BU only with SW version 5.0 and higher. Counts the total number of unicast frames (excluding retransmissions) that were successfully transmitt…
1.3.6.1.4.1.12394.1.1.11.5.1.3.1.32ColumnbrzaccVLNewAdbTxSuccessModLevel3read-onlycurrentApplicable to AU/BU only with SW version 5.0 and higher. Counts the total number of unicast frames (excluding retransmissions) that were successfully transmitt…
1.3.6.1.4.1.12394.1.1.11.5.1.3.1.33ColumnbrzaccVLNewAdbTxSuccessModLevel4read-onlycurrentApplicable to AU/BU only with SW version 5.0 and higher. Counts the total number of unicast frames (excluding retransmissions) that were successfully transmitt…
1.3.6.1.4.1.12394.1.1.11.5.1.3.1.34ColumnbrzaccVLNewAdbTxSuccessModLevel5read-onlycurrentApplicable to AU/BU only with SW version 5.0 and higher. Counts the total number of unicast frames (excluding retransmissions) that were successfully transmitt…
1.3.6.1.4.1.12394.1.1.11.5.1.3.1.35ColumnbrzaccVLNewAdbTxSuccessModLevel6read-onlycurrentApplicable to AU/BU only with SW version 5.0 and higher. Counts the total number of unicast frames (excluding retransmissions) that were successfully transmitt…
1.3.6.1.4.1.12394.1.1.11.5.1.3.1.36ColumnbrzaccVLNewAdbTxSuccessModLevel7read-onlycurrentApplicable to AU/BU only with SW version 5.0 and higher. Counts the total number of unicast frames (excluding retransmissions) that were successfully transmitt…
1.3.6.1.4.1.12394.1.1.11.5.1.3.1.37ColumnbrzaccVLNewAdbTxSuccessModLevel8read-onlycurrentApplicable to AU/BU only with SW version 5.0 and higher. Counts the total number of unicast frames (excluding retransmissions) that were successfully transmitt…
1.3.6.1.4.1.12394.1.1.11.5.1.3.1.38ColumnbrzaccVLNewAdbTxFailedModLevel1read-onlycurrentApplicable to AU/BU only with SW version 5.0 and higher. Counts the total number of failures to successfully transmit unicast frames intended to the SU/RB usin…
1.3.6.1.4.1.12394.1.1.11.5.1.3.1.39ColumnbrzaccVLNewAdbTxFailedModLevel2read-onlycurrentApplicable to AU/BU only with SW version 5.0 and higher. Counts the total number of failures to successfully transmit unicast frames intended to the SU/RB usin…
1.3.6.1.4.1.12394.1.1.11.5.1.3.1.40ColumnbrzaccVLNewAdbTxFailedModLevel3read-onlycurrentApplicable to AU/BU only with SW version 5.0 and higher. Counts the total number of failures to successfully transmit unicast frames intended to the SU/RB usin…
1.3.6.1.4.1.12394.1.1.11.5.1.3.1.41ColumnbrzaccVLNewAdbTxFailedModLevel4read-onlycurrentApplicable to AU/BU only with SW version 5.0 and higher. Counts the total number of failures to successfully transmit unicast frames intended to the SU/RB usin…
1.3.6.1.4.1.12394.1.1.11.5.1.3.1.42ColumnbrzaccVLNewAdbTxFailedModLevel5read-onlycurrentApplicable to AU/BU only with SW version 5.0 and higher. Counts the total number of failures to successfully transmit unicast frames intended to the SU/RB usin…
1.3.6.1.4.1.12394.1.1.11.5.1.3.1.43ColumnbrzaccVLNewAdbTxFailedModLevel6read-onlycurrentApplicable to AU/BU only with SW version 5.0 and higher. Counts the total number of failures to successfully transmit unicast frames intended to the SU/RB usin…
1.3.6.1.4.1.12394.1.1.11.5.1.3.1.44ColumnbrzaccVLNewAdbTxFailedModLevel7read-onlycurrentApplicable to AU/BU only with SW version 5.0 and higher. Counts the total number of failures to successfully transmit unicast frames intended to the SU/RB usin…
1.3.6.1.4.1.12394.1.1.11.5.1.3.1.45ColumnbrzaccVLNewAdbTxFailedModLevel8read-onlycurrentApplicable to AU/BU only with SW version 5.0 and higher. Counts the total number of failures to successfully transmit unicast frames intended to the SU/RB usin…
1.3.6.1.4.1.12394.1.1.11.5.1.3.1.46ColumnbrzaccVLNewAdbMainSwVersionread-onlycurrentApplicable to AU/BU only with SW version 5.0 and higher. Main Software Version of SU. Not available for SU-EZ.
1.3.6.1.4.1.12394.1.1.11.5.1.3.1.47ColumnbrzaccVLNewAdbShadowSwVersionread-onlycurrentApplicable to AU/BU only with SW version 5.0 and higher. Shadow Software Version of SU. Not available for SU-EZ.
1.3.6.1.4.1.12394.1.1.11.5.1.3.1.48ColumnbrzaccVLNewAdbReadOnlyCommunityread-onlycurrentApplicable to AU/BU only with SW version 5.0 and higher . SU/RB Read Only Community. Not available for SU-EZ.
1.3.6.1.4.1.12394.1.1.11.5.1.3.1.49ColumnbrzaccVLNewAdbWriteCommunityread-onlycurrentApplicable to AU/BU only with SW version 5.0 and higher. SU/RB Write Community The Community is accessible only with the Read-Write community string (administr…
1.3.6.1.4.1.12394.1.1.11.5.1.3.1.50ColumnbrzaccVLNewAdbAIFSread-onlycurrentApplicable to AU/BU only with SW version 5.0 and higher. The Arbitration Inter-Frame Spacing (AIFS) of relevant SU/RB. Not available for SU-EZ and it returns 0.
1.3.6.1.4.1.12394.1.1.11.5.1.3.1.51ColumnbrzaccVLNewAdbMinimumCWread-onlycurrentApplicable to AU/BU only with SW version 5.0 and higher. The Minimum Contention Window of relevant SU/RB. Not available for SU-EZ and it returns 0.
1.3.6.1.4.1.12394.1.1.11.5.1.3.1.52ColumnbrzaccVLNewAdbMaximumCWread-onlycurrentApplicable to AU/BU only with SW version 5.0 and higher. The Maximum Contention Window of relevant SU/RB. Not available for SU-EZ and it returns 0.
1.3.6.1.4.1.12394.1.1.11.5.1.3.1.53ColumnbrzaccVLNewAdbESSIDread-onlycurrentApplicable to AU/BU only with SW version 5.0 and higher. The ESSID of relevant SU/RB. The ESSID is accessible only with the write community string (administrat…
1.3.6.1.4.1.12394.1.1.11.5.1.3.1.54ColumnbrzaccVLNewAdbRSSIread-onlycurrentApplicable to AU/BU only with SW version 5.1 and higher. The average Received Signal Strength Indication of frames received by the AU/BU from the relevant SU/R…
1.3.6.1.4.1.12394.1.1.11.5.1.3.1.55ColumnbrzaccVLNewAdbDfsOptionread-onlycurrentApplicable to AU/BU only with SW version 5.5.21 and higher. The DFS option configuration received by the AU/BU from the relevant SU/RB.
1.3.6.1.4.1.12394.1.1.11.5.1.4NodebrzaccVLAggregateMIRCIR
1.3.6.1.4.1.12394.1.1.11.5.1.4.1ScalarbrzaccVLAggregateMIRUplinkread-onlycurrentApplicable to AU only with SW version 6.0 and higher. Aggregate MIR uplink.
1.3.6.1.4.1.12394.1.1.11.5.1.4.2ScalarbrzaccVLAggregateMIRDownlinkread-onlycurrentApplicable to AU only with SW version 6.0 and higher. Aggregate MIR downlink.
1.3.6.1.4.1.12394.1.1.11.5.1.4.3ScalarbrzaccVLAggregateCIRUplinkread-onlycurrentApplicable to AU only with SW version 6.0 and higher. Aggregate CIR uplink.
1.3.6.1.4.1.12394.1.1.11.5.1.4.4ScalarbrzaccVLAggregateCIRDownlinkread-onlycurrentApplicable to AU only with SW version 6.0 and higher. Aggregate CIR downlink.
1.3.6.1.4.1.12394.1.1.11.6NodebrzaccVLUpLinkQualityIndicator
1.3.6.1.4.1.12394.1.1.11.6.1ScalarbrzaccVLMeasureUpLinkQualityIndicatorread-writecurrentApplicable to SU/RB. Starts calculation of LQI. The calculation will be for a period of 10 seconds.
1.3.6.1.4.1.12394.1.1.11.6.2ScalarbrzaccVLReadUpLinkQualityIndicatorread-onlycurrentApplicable to SU/RB. The results of the last LQI calculation. Range: 1 to 8.
1.3.6.1.4.1.12394.1.1.11.6.3ScalarbrzaccVLUpLinkQualityIndicatorStatusread-onlycurrentApplicable to SU/RB Only. Indicates the test conditions. fullTest means that there are no limitations on the range of available modulation levels, and that all…
1.3.6.1.4.1.12394.1.1.11.7NodebrzaccVLMacPinpoint
1.3.6.1.4.1.12394.1.1.11.7.1TablebrzaccVLMacPinpointTablenot-accessiblecurrentApplicable to AU/BU only. A table that contains information about wireless device used by a certain Ethernet station in order to connect to the wireless network
1.3.6.1.4.1.12394.1.1.11.7.1.1RowbrzaccVLMacPinpointEntrynot-accessiblecurrentApplicable to AU/BU only. An entry in the MAC Pinpoint Table. Each entry contains an Ethernet station MAC address and the MAC address of the wireless device us…
1.3.6.1.4.1.12394.1.1.11.7.1.1.1ColumnmptEthernetStationMACAddressread-onlycurrentApplicable to AU/BU only. The MAC address of the Ethernet station. It is used as an index in the MAC Pinpoint Table.
1.3.6.1.4.1.12394.1.1.11.7.1.1.2ColumnmptUnitMACAddressread-onlycurrentApplicable to AU/BU only. The MAC address of the wireless device used by the station with the MAC Address from the index in order to access the wireless networ…
1.3.6.1.4.1.12394.1.1.11.8TablebrzaccVLDrapGatewaysTablenot-accessiblecurrentThis table provides information about Gateways supporting DRAP that are registered at the AU
1.3.6.1.4.1.12394.1.1.11.8.1RowbrzaccVLDrapGatewayEntrynot-accessiblecurrentA Drap Gateway Entry.
1.3.6.1.4.1.12394.1.1.11.8.1.1ColumnbrzaccVLDrapGatewayIndexread-onlycurrentGateway Entry's Index
1.3.6.1.4.1.12394.1.1.11.8.1.2ColumnbrzaccVLDrapGatewayIPread-onlycurrentThe IP address of the Gateway
1.3.6.1.4.1.12394.1.1.11.8.1.3ColumnbrzaccVLDrapGatewayTyperead-onlycurrentThe Gateway type
1.3.6.1.4.1.12394.1.1.11.8.1.4ColumnbrzaccVLDrapGatewayNoOfActiveVoiceCallsread-onlycurrentThe current number of active voice calls handled by the Gateway
1.3.6.1.4.1.12394.1.1.11.9TablebrzaccVLHiddenESSIDTablenot-accessiblecurrentApplicable to SU/RB only with SW version 5.0 and higher. The AU/BU units that rejected the subcribers because of worng ESSID
1.3.6.1.4.1.12394.1.1.11.9.1RowbrzaccVLHiddenESSIDEntrynot-accessiblecurrentApplicable to SU/RB only with SW version 5.0 and higher. An entry in the Hidden ESSID table.
1.3.6.1.4.1.12394.1.1.11.9.1.1ColumnbrzaccVLHiddenESSIDMacAddressread-onlycurrentThe MAC Address of the staion that rejected the subscriber beacuse of wrong ESSID
1.3.6.1.4.1.12394.1.1.11.9.1.2ColumnbrzaccVLHiddenESSIDAgeread-onlycurrentThe time (in second) passed since the corresponding AU/BU rejected the subscriber because of wrong ESSID
1.3.6.1.4.1.12394.1.1.11.10ScalarbrzaccVLAverageReceiveRSSIread-onlycurrentApplicable to SU/RB only. The average Received Signal Strength Indication of frames. This value is given in dBm units.
1.3.6.1.4.1.12394.1.1.11.11ScalarbrzaccVLCurrentNoiseFloorread-onlycurrentApplicable to all units. The current Noise Floor of the unit.
1.3.6.1.4.1.12394.1.1.11.12ScalarbrzaccVLAverageSignalInterferenceRatioread-onlycurrentApplicable to all units. The current Average Signal Interference Ratio of the unit.
1.3.6.1.4.1.12394.1.1.14NodebrzaccVLTraps
1.3.6.1.4.1.12394.1.1.14.1ScalarbrzaccVLTrapSUMacAddrread-onlycurrentApplicable to AU/BU only. SU/RB MAC Address.
1.3.6.1.4.1.12394.1.1.14.3ScalarbrzaccVLTrapTextread-onlycurrentTextual string for future use.
1.3.6.1.4.1.12394.1.1.14.4ScalarbrzaccVLTrapToggleread-onlycurrentApplicable to AU/BU only. An On/Off toggle status.
1.3.6.1.4.1.12394.1.1.14.5ScalarbrzaccVLTrapParameterChangedread-onlycurrentNot applicable starting with version 5.0. Applicable to all units. A modification to one of the parameters related to CIR/MIR, IP Filtering or VLAN.
1.3.6.1.4.1.12394.1.1.14.6ScalarbrzaccVLTrapAccessRightsread-onlycurrentApplicable to all units. The access rights used for login.
1.3.6.1.4.1.12394.1.1.14.7ScalarbrzaccVLTrapLogread-onlycurrentApplicable to all units. Login or logout to the Monitor program via Telnet.
1.3.6.1.4.1.12394.1.1.14.8ScalarbrzaccVLTrapTelnetUserIpAddressread-onlycurrentApplicable to all units. The IP address of a Telnet user.
1.3.6.1.4.1.12394.1.1.14.9ScalarbrzaccVLTrapRTxread-onlycurrentApplicable to AU/BU only. Retransmissions as a percentage of total transmissions.
1.3.6.1.4.1.12394.1.1.14.10ScalarbrzaccVLTrapFtpOrTftpStatusread-onlycurrentApplicable to all units. The status of the last FTP/TFTP loading procedure.
1.3.6.1.4.1.12394.1.1.14.11ScalarbrzaccVLDFSMoveFreqread-onlycurrentApplicable to AU/BU with HW revision B and lower (for units with HW revision C and higher replaced by brzaccVLTrapDFSMoveFreq New to support a resolution of 0.…
1.3.6.1.4.1.12394.1.1.14.12ScalarbrzaccVLDFSMoveFreqNewread-onlycurrentApplicable to AU/BU. The new frequency in MHz after detecting radar on a previous channel. (Replaces brzaccVLDFSMoveFreq to support a resolution of 0.5 MHz for…
1.3.6.1.4.1.12394.1.1.14.13ScalarbrzaccVLEthBroadcastThresholdExceededread-onlycurrentApplicable to all units. The number of packets that are dropped by the ethernet broadcast/multicast limiter.
1.3.6.1.4.1.12394.1.1.14.14ScalarbrzaccVLTrapSubscriberTyperead-onlycurrentApplicable to AUS only. The type of subscriber that was rejected by AUS
1.3.6.1.4.1.12394.1.1.14.15ScalarbrzaccVLTrapMACAddressread-onlycurrentApplicable to BU/RB only. The MAC address of the BNET B unit whose type has been changed
1.3.6.1.4.1.12394.1.1.14.16ScalarbrzaccVLNewUnitTypeTrapread-onlycurrentApplicable to BU/RB only. The new type of the BNET B unit.
1.3.6.1.4.1.12394.1.1.14.17ScalarbrzaccVLTrapSWVersionread-onlycurrentThe SW version of the SU that tries to associate with a station that has Wireless Link Prioritization Enabled
1.3.6.1.4.1.12394.1.1.14.18ScalarbrzaccVLTrapSequenceNumberread-onlycurrentApllicable to AU/BU only. Trap Variable indicating the sequence number of the last trap generated.
1.3.6.1.4.1.12394.1.1.14.19ScalarbrzaccVLTrapUnitMacAddrread-onlycurrentApplicable to all units. The MAC Address of the unit that is initiating the trap.
1.3.6.1.4.1.12394.1.1.14.20ScalarbrzaccVLTrapParameterGroupCoderead-onlycurrentApplicable to AU/BU only. The code of group parameter that was changed.
1.3.6.1.4.1.12394.1.1.14.21ScalarbrzaccVLTrapNewIPread-onlycurrentApplicable to AU/BU only. The code of group parameter that was changed.
1.3.6.1.4.1.12394.4NodealvarionOID
1.3.6.1.4.1.12394.4.1NodebrzAccessVLOID
1.3.6.1.4.1.12394.4.1.1NodebrzAccessVLAU
1.3.6.1.4.1.12394.4.1.2NodebrzAccessVLSU
1.3.6.1.4.1.12394.4.1.3NodebrzAccessVLProducts
1.3.6.1.4.1.12394.4.1.3.2NotificationbrzaccVLSUassociatedAUTRAPcurrentAn AU/BU trap indicating a new association with an SU/RB.
1.3.6.1.4.1.12394.4.1.3.3NotificationbrzaccVLAUdisassociatedTRAPcurrentAn AU/BU trap indicating that an SU/RB has been disassociated from the AU/BU.
1.3.6.1.4.1.12394.4.1.3.4NotificationbrzaccVLAUagingTRAPcurrentAn AU/BU trap indicating that the unit association was aged out and removed from the Association database following its failure to acknowledge a specified numb…
1.3.6.1.4.1.12394.4.1.3.6NotificationbrzaccVLSUassociatedTRAPcurrentStarting with 5.0 this trap is not generated. An SU/RB trap indicating association with an AU/BU. In addition to the MAC address information of the AU/BU, the …
1.3.6.1.4.1.12394.4.1.3.20NotificationbrzaccVLAUwirelessQualityTRAPcurrentAn AU/BU trap, indicating that the quality of the wireless link (retransmissions rate) has changed and dropped below (Off) or increased above (On) a threshold …
1.3.6.1.4.1.12394.4.1.3.101NotificationbrzaccVLPowerUpFromResetcurrentAn AU/BU trap indicating power up after Reset.
1.3.6.1.4.1.12394.4.1.3.102NotificationbrzaccVLTelnetStatusTRAPcurrentApplicable to all units. A trap indicating that a log-in or log-out has been performed via Telnet. Includes the log-in access right and the IP address of the P…
1.3.6.1.4.1.12394.4.1.3.103NotificationbrzaccVLParameterChangedTRAPcurrentStarting with version 5.0, this trap is not generated. It is replaced by brzaccVLParameterChangeTRAP. Applicable to all units. A trap indicating a change in a …
1.3.6.1.4.1.12394.4.1.3.104NotificationbrzaccVLLoadingStatusTRAPcurrentApplicable to all units. A trap indicating that last FTP/TFTP firmware loading process has been finished successfully or failed.
1.3.6.1.4.1.12394.4.1.3.105NotificationbrzaccVLPromiscuousModeTRAPcurrentAn AU/BU trap, indicating that the AU/BU In (On) Promiscuous Mode or out (Off) Promiscuous Mode.
1.3.6.1.4.1.12394.4.1.3.106NotificationbrzaccVLDFSRadarDetectedTRAPcurrentDFS: Applicable to AU/BU only. A trap indicating that a radar was detected.
1.3.6.1.4.1.12394.4.1.3.107NotificationbrzaccVLDFSFrequencyTRAPcurrentApplicable to AU/BU only. A trap indicating that the unit moved to a new frequency.
1.3.6.1.4.1.12394.4.1.3.108NotificationbrzaccVLDFSNoFreeChannelsExistsTRAPcurrentApplicable to AU/BU only. A trap indicating that a radar was detected and there is no free channel.
1.3.6.1.4.1.12394.4.1.3.109NotificationbrzaccVLEthBroadcastMulticastLimiterTRAPcurrentApplicable to all units. The trap is sent if the ethernet broadcast filter threshold is exceeded and it contains the number of dropped packets.
1.3.6.1.4.1.12394.4.1.3.110NotificationbrzaccVLAUSUnsupportedSubscriberTypeTRAPcurrentApplicable to AUS only. This trap is generated when a subscriber with unsupported type tries to associate to AUS. The AUS supports only SU-3, SU-6, SU-V. If li…
1.3.6.1.4.1.12394.4.1.3.111NotificationbrzaccVLUnitTypeChangedTRAPcurrentApplicable to BU/RB only. This trap is generated when the user changes the type of the BreezeNET B unit. The RB can be converted in BU or vice versa. The first…
1.3.6.1.4.1.12394.4.1.3.112NotificationbrzaccVLWLPrioritizationNotSupportedBySUTRAPcurrentApplicable to AU/BU only. This trap is generated when an SU/RB with a SW version below 4.0 that does not support Wireless Link Prioritization is associated wit…
1.3.6.1.4.1.12394.4.1.3.113NotificationbrzaccVLParameterChangeTRAPcurrentApplicable to AU/BU only with SW version 5.0 or higher. This trap is generated by AU/BU when a parameter from a group was changed. Also, if an SU/RB parameter …
1.3.6.1.4.1.12394.4.1.3.114NotificationbrzaccVLRunTimeIPChangeTRAPcurrentApplicable to AU/BU only with SW version 5.0 or higher. This trap is generated by AU/BU when the running IP of the unit was changed. Also, if the running IP of…
1.3.6.1.4.1.12394.4.1.3.115NotificationbrzaccVLDisassociateAllStationsTRAPcurrentApplicable to AU/BU only. A trap indicating that all stations were disassociated.
1.3.6.1.4.1.12394.4.1.4NodebrzAccessVLAU-BS
1.3.6.1.4.1.12394.4.1.5NodebrzAccessVLAU-SA
1.3.6.1.4.1.12394.4.1.6NodebrzAccessVLAUS-BS
1.3.6.1.4.1.12394.4.1.7NodebrzAccessVLAUS-SA
1.3.6.1.4.1.12394.4.1.8NodebrzAccessAU-EZ
1.3.6.1.4.1.12394.4.1.11NodebrzAccessVLSU-6-1D
1.3.6.1.4.1.12394.4.1.12NodebrzAccessVLSU-6-BD
1.3.6.1.4.1.12394.4.1.13NodebrzAccessVLSU-24-BD
1.3.6.1.4.1.12394.4.1.14NodebrzAccessVLSU-BD
1.3.6.1.4.1.12394.4.1.15NodebrzAccessVLSU-54-BD
1.3.6.1.4.1.12394.4.1.16NodebrzAccessVLSU-3-1D
1.3.6.1.4.1.12394.4.1.17NodebrzAccessVLSU-3-4D
1.3.6.1.4.1.12394.4.1.18NodebrzAccessVLSU-I
1.3.6.1.4.1.12394.4.1.19NodebrzAccessVLSU-EZ
1.3.6.1.4.1.12394.4.1.20NodebrzAccessVLSU-V
1.3.6.1.4.1.12394.4.1.21NodebrzNetB-BU-B14
1.3.6.1.4.1.12394.4.1.22NodebrzNetB-BU-B28
1.3.6.1.4.1.12394.4.1.23NodebrzNetB-BU-B100
1.3.6.1.4.1.12394.4.1.24NodebrzNetB-BU-B10
1.3.6.1.4.1.12394.4.1.31NodebrzNetB-RB-B14
1.3.6.1.4.1.12394.4.1.32NodebrzNetB-RB-B28
1.3.6.1.4.1.12394.4.1.33NodebrzNetB-RB-B100
1.3.6.1.4.1.12394.4.1.34NodebrzNetB-RB-B10
1.3.6.1.4.1.12394.4.1.41NodebrzAccess4900-AU-BS
1.3.6.1.4.1.12394.4.1.42NodebrzAccess4900-AU-SA
1.3.6.1.4.1.12394.4.1.51NodebrzAccess4900-SU-BD
1.3.6.1.4.1.12394.4.1.61NodebrzAccessVLSU-8-BD
1.3.6.1.4.1.12394.4.1.62NodebrzAccessVLSU-1-BD
1.3.6.1.4.1.12394.4.1.63NodebrzAccessVLSU-3-L
1.3.6.1.4.1.12394.4.1.64NodebrzAccessVLSU-6-L
1.3.6.1.4.1.12394.4.1.65NodebrzAccessVLSU-12-L
1.3.6.1.4.1.12394.4.1.70NodebrzAccessVL-AU
1.3.6.1.4.1.12394.4.1.75NodebrzAccessVL-SU
MIB Viewer