ALVARION-PUBLIC-ACCESS-MIB
91 objects
Alvarion Public Access MIB.
Imported Objects
| ALVARION-SMI | alvarionMgmtV2 |
| ALVARION-TC | AlvarionNotificationEnable AlvarionPriorityQueue AlvarionProfileIndexOrZero AlvarionSecurity AlvarionSSIDOrNone AlvarionUsersAuthenticationMode AlvarionUsersAuthenticationType |
| IF-MIB | InterfaceIndex |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Counter64 Gauge32 Integer32 IpAddress MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE Unsigned32 |
| SNMPv2-TC | DateAndTime MacAddress TruthValue |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.12394.1.10.5.1 | IdentityalvarionPublicAccessMIB | Alvarion Public Access MIB. | ||
| 1.3.6.1.4.1.12394.1.10.5.1.1 | NodealvarionPublicAccessMIBObjects | |||
| 1.3.6.1.4.1.12394.1.10.5.1.1.1 | NodepublicAccessGroup | |||
| 1.3.6.1.4.1.12394.1.10.5.1.1.1.1 | ScalarpublicAccessStatus | read-only | current | Identifies the current status of the authentication system. |
| 1.3.6.1.4.1.12394.1.10.5.1.1.1.2 | ScalarpublicAccessStatusChangedCause | read-only | current | Identifies the last cause of a status change. Mostly used by the publicAccessStatusChanged trap. |
| 1.3.6.1.4.1.12394.1.10.5.1.1.2 | NodepublicAccessDeviceGroup | |||
| 1.3.6.1.4.1.12394.1.10.5.1.1.2.1 | ScalarpublicAccessDeviceUserName | read-write | current | Specifies the username that the device uses when authenticating itself to a RADIUS server. |
| 1.3.6.1.4.1.12394.1.10.5.1.1.2.2 | ScalarpublicAccessDeviceUserPassword | read-write | current | Specifies the password the device uses when authenticating to a RADIUS server. For security reasons, this should be set only if SNMP traffic is sent through a … |
| 1.3.6.1.4.1.12394.1.10.5.1.1.2.3 | ScalarpublicAccessDeviceSessionTimeoutAdminStatus | read-write | current | Specifies the interval of time between two consecutive authentication attempts in minutes. At each successful authentication the device configuration is refres… |
| 1.3.6.1.4.1.12394.1.10.5.1.1.2.4 | ScalarpublicAccessDeviceSessionTimeoutOperStatus | read-only | current | Identifies the interval of time between two consecutive authentication attempts in seconds. At each successful authentication the device configuration is refre… |
| 1.3.6.1.4.1.12394.1.10.5.1.1.2.5 | ScalarpublicAccessDeviceConfigMode | read-only | current | Identifies how configuration of the device is performed. This can be via locally configured settings on the device, or retrieved from a AAA server. If both opt… |
| 1.3.6.1.4.1.12394.1.10.5.1.1.2.6 | ScalarpublicAccessDeviceAuthenProfileIndex | read-only | current | Identifies the AAA server profile to use to authenticate the device. This attribute only applies when publicAccessDeviceConfigMode is set to 'profile' or 'loca… |
| 1.3.6.1.4.1.12394.1.10.5.1.1.2.7 | ScalarpublicAccessDeviceAccountingEnabled | read-only | current | Identifies if accounting information is generated by the device and sent to the AAA server. The device generate RADIUS accounting of type ON and OFF. This also… |
| 1.3.6.1.4.1.12394.1.10.5.1.1.2.8 | ScalarpublicAccessDeviceAccountingProfileIndex | read-only | current | Identifies the AAA server profile to use for device accounting. This attribute only applies when publicAccessDeviceAccountingEnabled is set to 'enable'. When t… |
| 1.3.6.1.4.1.12394.1.10.5.1.1.2.9 | ScalarpublicAccessDeviceForceReconfiguration | read-write | current | Specify forceReconfiguration(1) to force the device to re-read the local configuration file or re-issue an authentication request to the AAA server, or both ba… |
| 1.3.6.1.4.1.12394.1.10.5.1.1.3 | NodepublicAccessUsersGroup | |||
| 1.3.6.1.4.1.12394.1.10.5.1.1.3.1 | ScalarpublicAccessUsersMaxCount | read-only | current | Indicates the maximum number of concurrent authenticated users. |
| 1.3.6.1.4.1.12394.1.10.5.1.1.3.2 | ScalarpublicAccessUsersCount | read-only | current | Indicates the number of currently authenticated users. |
| 1.3.6.1.4.1.12394.1.10.5.1.1.3.3 | ScalarpublicAccessUsersThreshold | read-write | current | Specifies the trigger value for sending the publicAccessUsersThresholdTrap. When the number of users logged into the public access interface is equal to or exc… |
| 1.3.6.1.4.1.12394.1.10.5.1.1.3.4 | ScalarpublicAccessUsersSessionTrapEnabled | read-write | current | When set to enable, the publicAccessUsersSessionStart and publicAccessUsersSessionStop traps are generated when a user session begins or ends. |
| 1.3.6.1.4.1.12394.1.10.5.1.1.3.5 | TablepublicAccessUsersConfigTable | not-accessible | current | Provides information on the user's authentication method. In tabular form to allow multiple instances on an agent. |
| 1.3.6.1.4.1.12394.1.10.5.1.1.3.5.1 | RowpublicAccessUsersConfigEntry | not-accessible | current | An entry in the table. |
| 1.3.6.1.4.1.12394.1.10.5.1.1.3.5.1.1 | ColumnpublicAccessUsersConfigIndex | not-accessible | current | Index of a user profile in the publicAccessUsersConfigTable. |
| 1.3.6.1.4.1.12394.1.10.5.1.1.3.5.1.2 | ColumnpublicAccessUsersConfigAuthenType | read-only | current | Indicates the mechanism used to authenticate users. |
| 1.3.6.1.4.1.12394.1.10.5.1.1.3.5.1.3 | ColumnpublicAccessUsersConfigAuthenMode | read-only | current | Specifies how the user authentication is performed. It can be done with the local user list or via a AAA server profile. If both are enabled, the local user li… |
| 1.3.6.1.4.1.12394.1.10.5.1.1.3.5.1.4 | ColumnpublicAccessUsersConfigAuthenProfileIndex | read-only | current | Specifies the AAA profile to use for user authentication when publicAccessUsersAuthenMode is set to 'profile' or 'localAndProfile'. |
| 1.3.6.1.4.1.12394.1.10.5.1.1.3.5.1.5 | ColumnpublicAccessUsersConfigAuthenTimeout | read-only | current | Logins are refused if the AAA server does not respond within this time period. Only applies when coVirtualApUserAccessAuthenMode is set to 'profile' or 'localA… |
| 1.3.6.1.4.1.12394.1.10.5.1.1.3.5.1.6 | ColumnpublicAccessUsersConfigAccountingEnabled | read-only | current | Indicates if accounting information is generated by the device and sent to the AAA server for public access users. Accounting information is generated only if … |
| 1.3.6.1.4.1.12394.1.10.5.1.1.3.5.1.7 | ColumnpublicAccessUsersConfigAccountingProfileIndex | read-only | current | Identifies the AAA profile to send accounting to for public access users. When zero is specified, the value set inside publicAccessDeviceAuthenProfileIndex is … |
| 1.3.6.1.4.1.12394.1.10.5.1.1.3.5.1.8 | ColumnpublicAccessUsersConfigInterfaceIndex | read-only | current | Indicates the local interface on which these configuration parameters apply. This attribute is used with the publicAccessUsersConfigVirtualApProfileIndex to un… |
| 1.3.6.1.4.1.12394.1.10.5.1.1.3.5.1.9 | ColumnpublicAccessUsersConfigVirtualApProfileIndex | read-only | current | Indicates a user's VAP profile currently associated with these configuration parameters. This attribute is used with the publicAccessUsersConfigInterfaceIndex … |
| 1.3.6.1.4.1.12394.1.10.5.1.1.3.6 | TablepublicAccessUserTable | not-accessible | current | A table containing specific information for users authenticated by the authentication system. In tabular form to allow multiple instances on an agent. |
| 1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1 | RowpublicAccessUserEntry | not-accessible | current | Information about a particular user that has been authenticated by the authentication system. publicAccessUserIndex - Uniquely identifies a user in the table. |
| 1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.1 | ColumnpublicAccessUserIndex | not-accessible | current | Index of a user in the publicAccessUserTable. |
| 1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.2 | ColumnpublicAccessUserAuthenType | read-only | current | Indicates the mechanism used to authenticate the user. |
| 1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.3 | ColumnpublicAccessUserAuthenMode | read-only | current | Specifies how user authentication is performed. It can be done using a local user list defined on the device or AAA server profile. If both modes are active th… |
| 1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.4 | ColumnpublicAccessUserState | read-only | current | Indicates the current state of the user. |
| 1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.5 | ColumnpublicAccessUserStationIpAddress | read-only | current | Indicates the user's IP address. |
| 1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.6 | ColumnpublicAccessUserName | read-only | current | Indicates the user's name. |
| 1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.7 | ColumnpublicAccessUserSessionStartTime | read-only | current | Indicates when this user session was started. |
| 1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.8 | ColumnpublicAccessUserSessionDuration | read-only | current | Indicates how long the user's session has been active. When this counter reaches its maximum value, it wraps around and starts increasing again from zero. |
| 1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.9 | ColumnpublicAccessUserIdleTime | read-only | current | Indicates for how long the user's session has been idle. When this counter reaches its maximum value, it wraps around and starts increasing again from zero. |
| 1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.10 | ColumnpublicAccessUserBytesSent | read-only | current | Indicates the total number of bytes sent by the user. When this counter reaches its maximum value, it wraps around and starts increasing again from zero. |
| 1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.11 | ColumnpublicAccessUserBytesReceived | read-only | current | Indicates the total number of bytes received by the user. When this counter reaches its maximum value, it wraps around and starts increasing again from zero. |
| 1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.12 | ColumnpublicAccessUserPacketsSent | read-only | current | Indicates the total number of IP packets sent by the user. When this counter reaches its maximum value, it wraps around and starts increasing again from zero. |
| 1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.13 | ColumnpublicAccessUserPacketsReceived | read-only | current | Indicates the total number of IP packets received by the user. When this counter reaches its maximum value, it wraps around and starts increasing again from ze… |
| 1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.14 | ColumnpublicAccessUserForceDisconnection | read-write | current | Setting this attribute to 'adminReset' disconnects the user with a cause of ADMIN_RESET. Reading this variable always return 'idle'. |
| 1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.15 | ColumnpublicAccessUserStationMacAddress | read-only | current | Indicates the user's MAC Address. |
| 1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.16 | ColumnpublicAccessUserApMacAddress | read-only | current | Indicates the user's Access Point MAC Address when Location- Aware is enabled or the Access Controller MAC Address. |
| 1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.17 | ColumnpublicAccessUserGroupName | read-only | current | Indicates the user's Access Point Group Name (ONLY when Location-aware is enabled and properly configured). If this information is not available, a zero-Length… |
| 1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.18 | ColumnpublicAccessUserSSID | read-only | current | Indicates the user's Access Point SSID (ONLY when Location-aware is enabled and properly configured). If this information is not available, a zero-Length strin… |
| 1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.19 | ColumnpublicAccessUserSecurity | read-only | current | Specifies the user's security mode. |
| 1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.20 | ColumnpublicAccessUserPHYType | read-only | current | Specifies the user's radio type. |
| 1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.21 | ColumnpublicAccessUserVLAN | read-only | current | Specifies the VLAN currently assigned to the user. |
| 1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.22 | ColumnpublicAccessUserApRadioIndex | read-only | current | Indicates the radio to which this user is associated. The index 0 is reserved when location aware is not enabled or not properly configured. It means that the … |
| 1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.23 | ColumnpublicAccessUserConfigIndex | read-only | current | Indicates the configuration profile in the publicAccessUsersConfigTable currently associated with this user. When location aware is not enabled or not properly… |
| 1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.24 | ColumnpublicAccessUserConnectedInterface | accessible-for-notify | current | Indicates the device's logical public interface to which the user is connected. This will always be a string containing 'br0'. |
| 1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.25 | ColumnpublicAccessUserBytesSentDropped | read-only | current | Indicates the total number of bytes sent by the user and dropped due to rate limitation. When this counter reaches its maximum value, it wraps around and start… |
| 1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.26 | ColumnpublicAccessUserBytesReceivedDropped | read-only | current | Indicates the total number of bytes received for the user and dropped due to rate limitation. When this counter reaches its maximum value, it wraps around and … |
| 1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.27 | ColumnpublicAccessUserPacketsSentDropped | read-only | current | Indicates the total number of packets sent by the user and dropped due to rate limitation. When this counter reaches its maximum value, it wraps around and sta… |
| 1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.28 | ColumnpublicAccessUserPacketsReceivedDropped | read-only | current | Indicates the total number of packets received for the user and dropped due to rate limitation. When this counter reaches its maximum value, it wraps around an… |
| 1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.29 | ColumnpublicAccessUserRateLimitationEnabled | read-only | current | Specifies if rate limitation is enabled for the user. |
| 1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.30 | ColumnpublicAccessUserMaxTransmitRate | read-only | current | Specifies the maximum transmit rate for the user. |
| 1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.31 | ColumnpublicAccessUserMaxReceiveRate | read-only | current | Specifies the maximum receive rate for the user. |
| 1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.32 | ColumnpublicAccessUserBandwidthControlLevel | read-only | current | Specifies the user's bandwidth control level. |
| 1.3.6.1.4.1.12394.1.10.5.1.1.3.6.1.33 | ColumnpublicAccessUserNASPort | read-only | current | Specifies the NAS-Port value assigned to the user. |
| 1.3.6.1.4.1.12394.1.10.5.1.1.3.7 | ScalarpublicAccessUsersLoggedInTrapEnabled | read-write | current | When set to enable, the publicAccessUsersLoggedInTrap is generated. |
| 1.3.6.1.4.1.12394.1.10.5.1.1.3.8 | ScalarpublicAccessUsersLoggedInTrapInterval | read-write | current | Interval between publicAccessUsersLoggedInTrap traps. Setting this to 0 will disable periodic sending of these traps. |
| 1.3.6.1.4.1.12394.1.10.5.1.1.4 | NodepublicAccessNASPortsGroup | |||
| 1.3.6.1.4.1.12394.1.10.5.1.1.4.1 | ScalarpublicAccessNASPortCount | read-only | current | Indicates the number of NAS-Port supported. |
| 1.3.6.1.4.1.12394.1.10.5.1.1.4.2 | TablepublicAccessNASPortTable | not-accessible | current | A table containing specific information for NAS-Port by the Access Controller. In tabular form to allow multiple instances on an agent. |
| 1.3.6.1.4.1.12394.1.10.5.1.1.4.2.1 | RowpublicAccessNASPortEntry | not-accessible | current | Information about a particular NAS-Port by Access Controller. publicAccessNASPortIndex - Uniquely identifies a NAS-Port in the table. |
| 1.3.6.1.4.1.12394.1.10.5.1.1.4.2.1.1 | ColumnpublicAccessNASPortIndex | not-accessible | current | Index of a NAS-Port in the publicAccessNASPortTable. |
| 1.3.6.1.4.1.12394.1.10.5.1.1.4.2.1.2 | ColumnpublicAccessNASPortUserName | read-only | current | Indicates the user's name currently authenticated by the Access Controller on this NAS-Port. |
| 1.3.6.1.4.1.12394.1.10.5.1.2 | NodepublicAccessMIBNotificationPrefix | |||
| 1.3.6.1.4.1.12394.1.10.5.1.2.0 | NodepublicAccessMIBNotifications | |||
| 1.3.6.1.4.1.12394.1.10.5.1.2.0.1 | NotificationpublicAccessStatusChangedTrap | current | This notification is sent whenever the authentication system status changes (up or down). | |
| 1.3.6.1.4.1.12394.1.10.5.1.2.0.2 | NotificationpublicAccessUsersThresholdTrap | current | This notification is sent whenever publicAccessUsersThreshold is exceeded. | |
| 1.3.6.1.4.1.12394.1.10.5.1.2.0.3 | NotificationpublicAccessUsersSessionStartTrap | current | When a user successfully authenticate a trap is generated if the publicAccessUsersSessionTrapEnabled is set to True. | |
| 1.3.6.1.4.1.12394.1.10.5.1.2.0.4 | NotificationpublicAccessUsersSessionStopTrap | current | When a user terminates their session a trap is generated if the publicAccessUsersSessionTrapEnabled is set to True. | |
| 1.3.6.1.4.1.12394.1.10.5.1.2.0.5 | NotificationpublicAccessUsersSessionFailTrap | current | When a user authentication fails a trap is generated if the publicAccessUsersSessionTrapEnabled is set to True. | |
| 1.3.6.1.4.1.12394.1.10.5.1.2.0.6 | NotificationpublicAccessUsersLoggedInTrap | current | This is sent when a user is authenticated or periodically (see publicAccessUSersLoggedInTrapInterval) if the publicAccessUsersLoggedInTrapEnabled is set to Tru… | |
| 1.3.6.1.4.1.12394.1.10.5.1.3 | NodealvarionPublicAccessMIBConformance | |||
| 1.3.6.1.4.1.12394.1.10.5.1.3.1 | NodealvarionPublicAccessMIBCompliances | |||
| 1.3.6.1.4.1.12394.1.10.5.1.3.1.1 | CompliancealvarionPublicAccessMIBCompliance | current | The compliance statement for entities which implement the Alvarion Public Access MIB. | |
| 1.3.6.1.4.1.12394.1.10.5.1.3.2 | NodealvarionPublicAccessMIBGroups | |||
| 1.3.6.1.4.1.12394.1.10.5.1.3.2.1 | GroupalvarionPublicAccessMIBGroup | current | A collection of objects providing control over the Public Access MIB. | |
| 1.3.6.1.4.1.12394.1.10.5.1.3.2.2 | GroupalvarionPublicAccessUserMIBGroup | current | A collection of objects providing the Public Access MIB capability. | |
| 1.3.6.1.4.1.12394.1.10.5.1.3.2.3 | GroupalvarionPublicAccessUserConfigMIBGroup | current | A collection of objects providing the Public Access user configuration capability. | |
| 1.3.6.1.4.1.12394.1.10.5.1.3.2.4 | GroupalvarionPublicAccessNotificationGroup | current | A collection of supported notifications. | |
| 1.3.6.1.4.1.12394.1.10.5.1.3.2.5 | GroupalvarionPublicAccessNASPortsMIBGroup | current | A collection of objects providing the Public Access NAS Port MIB capability. |