APDISC-MIB
40 objects
No module-level DESCRIPTION found.
Imported Objects
| BINTEC-MIB MISSING | Date |
| RFC-1212 | OBJECT-TYPE |
| RFC1155-SMI | enterprises IpAddress NetworkAddress TimeTicks |
| RFC1158-MIB | DisplayString |
| SNMPv2-TC | MacAddress |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.272 | Nodebintec | |||
| 1.3.6.1.4.1.272.4 | Nodebibo | |||
| 1.3.6.1.4.1.272.4.1 | Nodeadmin | |||
| 1.3.6.1.4.1.272.4.49 | Nodeapdisc | |||
| 1.3.6.1.4.1.272.4.49.1 | TableapDiscCtrlTable | not-accessible | mandatory | This table holds the interfaces configured for access point disovery. An entry in this table is identified by the interface index and the protocol to be used f… |
| 1.3.6.1.4.1.272.4.49.1.1 | RowapDiscCtrlEntry | not-accessible | mandatory | The access point discovery control information. |
| 1.3.6.1.4.1.272.4.49.1.1.1 | ColumnapDiscCtrlIfIndex | read-write | mandatory | This variable identifies on which interface the access point discovery is to be performed. The interface is identified by its index in the ifTable. |
| 1.3.6.1.4.1.272.4.49.1.1.2 | ColumnapDiscCtrlProto | read-write | mandatory | This indicates which access point discovery is to be performed. Currently only ARtem access points can be discovered. This is a proprietary discovery protocol,… |
| 1.3.6.1.4.1.272.4.49.1.1.3 | ColumnapDiscCtrlOperation | read-write | mandatory | Setting this variable to 'discovery' initiates the discovery. After the discovery it is autonomously changed to 'none'. Setting this variable to 'delete' delet… |
| 1.3.6.1.4.1.272.4.49.1.1.4 | ColumnapDiscCtrlResult | read-only | mandatory | This variable indicates the result of the discovery operation after the operation has finished. 'noError': no discovery has been initiated or discovery was a s… |
| 1.3.6.1.4.1.272.4.49.1.1.5 | ColumnapDiscCtrlLastRun | read-only | mandatory | The time (GMT) of the last successful access point discovery given in seconds since 01/01/1970 00:00:00. A value of 0 indicates that no successful discovery ha… |
| 1.3.6.1.4.1.272.4.49.1.1.6 | ColumnapDiscCtrlLimit | read-write | mandatory | This variable limits how many replies from APs are to be stored. The replies exceeding this value are discarded. This avoids a DOS vulnerability where one may … |
| 1.3.6.1.4.1.272.4.49.2 | TableapDiscTable | not-accessible | mandatory | In this table the discovered access points are listed with the retrieved information like node name, IP address, netmask and gateway address. An entry in this … |
| 1.3.6.1.4.1.272.4.49.2.1 | RowapDiscEntry | not-accessible | mandatory | An entry for a discovered access point. |
| 1.3.6.1.4.1.272.4.49.2.1.1 | ColumnapDiscIfIndex | read-only | mandatory | The interface on which the access point was detected. The interface is identified by its interface index in the ifTable. |
| 1.3.6.1.4.1.272.4.49.2.1.2 | ColumnapDiscProto | read-only | mandatory | This indicates via which discovery protocol the access point was found. Currently only the protocol to discover ARtem access points is supported. This is proto… |
| 1.3.6.1.4.1.272.4.49.2.1.3 | ColumnapDiscMacAddress | read-only | mandatory | The MAC address of the found access point. The ARtem access points report via the discovery protocol the MAC address of their first ethernet-like interface. |
| 1.3.6.1.4.1.272.4.49.2.1.4 | ColumnapDiscNodeName | read-only | mandatory | The node name of the access point. |
| 1.3.6.1.4.1.272.4.49.2.1.5 | ColumnapDiscIpStatus | read-only | mandatory | This indicates how the access point got its IP address, netmask and gateway address. 'unknown' means that the access point does not give an indication how thes… |
| 1.3.6.1.4.1.272.4.49.2.1.6 | ColumnapDiscIpAddress | read-only | mandatory | The IP address of the access point. |
| 1.3.6.1.4.1.272.4.49.2.1.7 | ColumnapDiscNetMask | read-only | mandatory | The netmask of the access point. |
| 1.3.6.1.4.1.272.4.49.2.1.8 | ColumnapDiscGwAddress | read-only | mandatory | The gateway address of the access point. |
| 1.3.6.1.4.1.272.4.49.2.1.9 | ColumnapDiscLastChange | read-only | mandatory | The time (GMT) when the access point was initially discovered or has changed its networking configuration given in seconds since 01/01/1970 00:00:00. |
| 1.3.6.1.4.1.272.4.49.2.1.10 | ColumnapDiscSerialNumber | read-only | mandatory | The serial number of the access point. |
| 1.3.6.1.4.1.272.4.49.2.1.11 | ColumnapDiscSysDescription | read-only | mandatory | The system description of the access point. |
| 1.3.6.1.4.1.272.4.49.2.1.12 | ColumnapDiscVersionString | read-only | mandatory | The version string of the access point. |
| 1.3.6.1.4.1.272.4.49.3 | TableapDiscSetTable | not-accessible | mandatory | This table holds one entry for each discovered access point allowing to configure the access point's network parameters like node name, IP address, netmask and… |
| 1.3.6.1.4.1.272.4.49.3.1 | RowapDiscSetEntry | not-accessible | mandatory | An entry fo an discovered access point allowing to set network parameters. |
| 1.3.6.1.4.1.272.4.49.3.1.1 | ColumnapDiscSetIfIndex | read-only | mandatory | The interface on which the access point was detected. The interface is identified by its interface index in the ifTable. |
| 1.3.6.1.4.1.272.4.49.3.1.2 | ColumnapDiscSetProto | read-only | mandatory | This indicates via which protocol the access point is addressed. Currently only the protocol to discover ARtem access points is supported. This is protocol use… |
| 1.3.6.1.4.1.272.4.49.3.1.3 | ColumnapDiscSetMacAddress | read-only | mandatory | The MAC address of the access point. The ARtem access points report via the discovery protocol the MAC address of their first ethernet-like interface. |
| 1.3.6.1.4.1.272.4.49.3.1.4 | ColumnapDiscSetNodeName | read-write | mandatory | The new node name of the access point to be used in the next set request. |
| 1.3.6.1.4.1.272.4.49.3.1.5 | ColumnapDiscSetIpAddress | read-write | mandatory | The new IP address of the access point to be used in the next set request. The access point uses DHCP if apDiscSetIpAddress, apDiscSetNetmask and apDiscSetGwAd… |
| 1.3.6.1.4.1.272.4.49.3.1.6 | ColumnapDiscSetNetMask | read-write | mandatory | The new netmask of the access point to be used in the next set request. The access point uses DHCP if apDiscSetIpAddress, apDiscSetNetmask and apDiscSetGwAddre… |
| 1.3.6.1.4.1.272.4.49.3.1.7 | ColumnapDiscSetGwAddress | read-write | mandatory | The new gateway address of the access point to be used in the next set request. The gateway address must be in the network defined by apDiscSetIpAddress and th… |
| 1.3.6.1.4.1.272.4.49.3.1.8 | ColumnapDiscSetAdminPassword | read-write | mandatory | The access point's password of the administrative user account to authorize the set request. |
| 1.3.6.1.4.1.272.4.49.3.1.9 | ColumnapDiscSetOperation | read-write | mandatory | This variable allows to initiate a set operation. After the set operation is performed the variable apDiscSetResult is updated autonomously to reflect the resu… |
| 1.3.6.1.4.1.272.4.49.3.1.10 | ColumnapDiscSetResult | read-only | mandatory | This variable indicates the result of the set operation after the operation has finished. 'noError': no set operation performed or operation was a success. 'in… |
| 1.3.6.1.4.1.272.4.49.4 | NodeapDiscControl | |||
| 1.3.6.1.4.1.272.4.49.4.1 | ScalarapDiscServerEnable | read-write | mandatory | Enable/disable the discovery server. |