APEX-MIB
1656 objects
The MIB module for the APEX.
Imported Objects
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.4.1.1166.1.31 | Identityapex | The MIB module for the APEX. | ||
| 1.3.6.1.4.1.1166.1.31.0 | NodeapexTraps | |||
| 1.3.6.1.4.1.1166.1.31.0.3 | NotificationtrapConfigurationChangeInteger | current | This trap is issued if configuration of a single variable with integer type was changed (via ANY interface). TrapChangedValueInteger variable may contain curre… | |
| 1.3.6.1.4.1.1166.1.31.0.4 | NotificationtrapConfigurationChangeDisplayString | current | This trap is issued if configuration of a single variable with DisplayString type was changed (via ANY interface). TrapChangedValueDisplayString variable may c… | |
| 1.3.6.1.4.1.1166.1.31.0.5 | NotificationtrapConfigurationChangeOID | current | This trap is issued if configuration of a single variable with OID type was changed (via ANY interface). TrapChangedValueOID variable may contain current readi… | |
| 1.3.6.1.4.1.1166.1.31.0.6 | NotificationtrapConfigurationChangeIpAddress | current | This trap is issued if configuration of a single variable with IpAddress type was changed (via ANY interface). TrapChangedValueIpAddress variable may contain c… | |
| 1.3.6.1.4.1.1166.1.31.0.20 | NotificationtrapConditionNotInList | current | This trap is issued if a condition is being cleared and it is not in the condition list. trapAdditionalInfoInteger1 : Task and Function ID (task and function g… | |
| 1.3.6.1.4.1.1166.1.31.0.21 | NotificationtrapConditionAlreadyInList | current | This trap is issued if a condition is being set and it is already in the condition list. trapAdditionalInfoInteger1 : Task and Function ID (task and function g… | |
| 1.3.6.1.4.1.1166.1.31.0.22 | NotificationtrapConditionListFull | current | This trap is issued if a condition is being set and the condition list is full. trapAdditionalInfoInteger1 : Task and Function ID (task and function generates … | |
| 1.3.6.1.4.1.1166.1.31.0.23 | NotificationtrapInvalidCaseInSwitch | current | This trap is issued when in a switch statement the default case is reached. The trapAdditionalInfoInteger1 will contain the task and Function ID. The trapAddit… | |
| 1.3.6.1.4.1.1166.1.31.0.24 | NotificationtrapCannotCreateSemaphore | current | This trap is issued when a semaphore cannot be created. The trapAdditionalInfoInteger1 will contain the task and Function ID, the trapAdditionalInfoInteger2 an… | |
| 1.3.6.1.4.1.1166.1.31.0.25 | NotificationtrapCannotOpenSocket | current | This trap is issued when a socket cannot be opened. The trapAdditionalInfoInteger1 will contain the task and Function ID. The trapAdditionalInfoInteger2 will c… | |
| 1.3.6.1.4.1.1166.1.31.0.26 | NotificationtrapUnknownMessageReceived | current | This trap is issued when an unknown message is received. The trapAdditionalInfoInteger1 will contain the task and Function ID. The trapAdditionalInfoInteger2 w… | |
| 1.3.6.1.4.1.1166.1.31.0.27 | NotificationtrapInvalidMessageReceived | current | This trap is issued when an invalid message is received. The trapAdditionalInfoInteger1 will contain the task and Function ID. The trapAdditionalInfoInteger2 w… | |
| 1.3.6.1.4.1.1166.1.31.0.8000 | NotificationtrapHardwareFault | current | See corresponding alarm apexAlarmHardwareFault. Additional Info 1 carries HW Error Code (refer to HW Event Log for details). Additional Info 2 is not used. Add… | |
| 1.3.6.1.4.1.1166.1.31.0.8001 | NotificationtrapInvalidInitData | current | See corresponding alarm apexAlarmInvalidInitData. This trap is sent on a summary basis. Additional Info 1 is not used. Additional Info 2 is not used. Additiona… | |
| 1.3.6.1.4.1.1166.1.31.0.8002 | NotificationtrapTemperatureFault | current | See corresponding alarm apexAlarmTemperatureFault. This trap is sent on a summary basis. Additional Info 1 is not used. Additional Info 2 is not used. Addition… | |
| 1.3.6.1.4.1.1166.1.31.0.8003 | NotificationtrapFanFault | current | See corresponding alarm apexAlarmFanFault. This trap is sent on summary basis. Additional Info 1 is not used. Additional Info 2 is not used. Additional Info 3 … | |
| 1.3.6.1.4.1.1166.1.31.0.8004 | NotificationtrapPowerFault | current | See corresponding alarm apexAlarmPowerFault. Additional Info 1 carries the apexPsStatusTable index (1 to 2). Additional Info 2 is not used. Additional Info 3 i… | |
| 1.3.6.1.4.1.1166.1.31.0.8020 | NotificationtrapGbeLossOfPhysicalInput | current | See corresponding alarm apexAlarmGbeLossOfPhysicalInput. Additional Info 1 carries the Gigabit Ethernet Interface Number (1 to 4). Additional Info 2 is not use… | |
| 1.3.6.1.4.1.1166.1.31.0.8021 | NotificationtrapGbeBufferFullness | current | See corresponding alarm apexAlarmGbeBufferFullness. Additional Info 1 carries the Gigabit Ethernet Processor Number (1 to 2). Additional Info 2 is not used. Ad… | |
| 1.3.6.1.4.1.1166.1.31.0.8022 | NotificationtrapGbeInputStreamLowBitRate | current | See corresponding alarm apexAlarmGbeInputStreamLowBitRate. This trap is sent on a summary basis. Additional Info 1 is not used. Additional Info 2 is not used. … | |
| 1.3.6.1.4.1.1166.1.31.0.8023 | NotificationtrapGbeInputStreamHighBitRate | current | See corresponding alarm apexAlarmGbeInputStreamHighBitRate. This trap is sent on a summary basis. Additional Info 1 is not used. Additional Info 2 is not used.… | |
| 1.3.6.1.4.1.1166.1.31.0.8024 | NotificationtrapGbeMptsRedundPrimaryThreshold | current | See corresponding alarm apexAlarmGbeMptsRedundPrimaryThreshold. This trap is sent on a summary basis. Additional Info 1 is not used. Additional Info 2 is not u… | |
| 1.3.6.1.4.1.1166.1.31.0.8025 | NotificationtrapGbeMptsRedundFailOver | current | See corresponding alarm apexAlarmGbeMptsRedundFailOver. This trap is sent on a summary basis. Additional Info 1 is not used. Additional Info 2 is not used. Add… | |
| 1.3.6.1.4.1.1166.1.31.0.8026 | NotificationtrapServiceInError | current | See corresponding alarm apexAlarmServiceInError. This trap is sent on a summary basis. Additional Info 1 is not used. Additional Info 2 is not used. Additional… | |
| 1.3.6.1.4.1.1166.1.31.0.8027 | NotificationtrapGbeLossOfInputStream | current | See corresponding alarm apexAlarmGbeLossOfInputStream. This trap is sent on a summary basis. Additional Info 1 is not used. Additional Info 2 is not used. Addi… | |
| 1.3.6.1.4.1.1166.1.31.0.8028 | NotificationtrapGigeToHostCommFault | current | See corresponding alarm apexAlarmGigeToHostCommFault. This trap is sent on a summary basis. Additional Info 1 is not used. Additional Info 2 is not used. Addit… | |
| 1.3.6.1.4.1.1166.1.31.0.8029 | NotificationtrapGbeInterfaceRedundFailOver | current | See corresponding alarm apexAlarmGbeInterfaceRedundFailOver. This trap is sent on a GbE Redundant Pair basis. Additional Info 1 contains the GbE interface numb… | |
| 1.3.6.1.4.1.1166.1.31.0.8030 | NotificationtrapLossOfInputAncillaryPid | current | This trap is sent if 'apexAlarmLossOfInputAncillaryPid' is enabled by 'apexEnableLossOfInputAncillaryPid' and if any of the input ancillary PID is not received… | |
| 1.3.6.1.4.1.1166.1.31.0.8031 | NotificationtrapGbeInputStreamPacketDrop | current | This trap is sent if 'apexAlarmGbeInputStreamPacketDrop' is enabled by 'apexEnableGbeInputStreamPacketDrop' and if any of the input data streams drops a packet. | |
| 1.3.6.1.4.1.1166.1.31.0.8040 | NotificationtrapOutputUtilizationFault | current | See corresponding alarm apexAlarmOutputUtilizationFault. This trap is sent on an Output Transport Stream basis. Additional Info 1 carries the Output Transport … | |
| 1.3.6.1.4.1.1166.1.31.0.8041 | NotificationtrapOutputOverflow | current | See corresponding alarm apexAlarmOutputOverflow. This trap is sent on an Output Transport Stream basis. Additional Info 1 carries the Output Transport Stream n… | |
| 1.3.6.1.4.1.1166.1.31.0.8042 | NotificationtrapQamModuleFault | current | See corresponding alarm apexAlarmQamModuleFault. This trap is sent on a QAM Module basis. Additional Info 1 carries the QAM Module number (1 to 3). Additional … | |
| 1.3.6.1.4.1.1166.1.31.0.8043 | NotificationtrapQamRfPortFault | current | See corresponding alarm apexAlarmQamRfPortFault. This trap is sent on a QAM RF Port basis. Additional Info 1 carries the QAM RF Port number: RF Port 1 = QAM Mo… | |
| 1.3.6.1.4.1.1166.1.31.0.8044 | NotificationtrapQamChannelFault | current | See corresponding alarm apexAlarmQamChannelFault. This trap is sent on a QAM Channel basis. Additional Info 1 carries the QAM Channel number. 1 to 8 = QAM Modu… | |
| 1.3.6.1.4.1.1166.1.31.0.8045 | NotificationtrapQamRfRedundFailOver | current | See corresponding alarm apexAlarmQamRfRedundFailOver. This trap is sent on a Primary QAM RF Port basis. Additional Info 1 carries the Primary QAM RF Port numbe… | |
| 1.3.6.1.4.1.1166.1.31.0.8046 | NotificationtrapQamRfRedundMismatch | current | See corresponding alarm apexAlarmQamRfRedundMismatch. This trap is sent on a summary basis. Additional Info is not used. | |
| 1.3.6.1.4.1.1166.1.31.0.8047 | NotificationtrapQamModuleRemovalFault | current | See corresponding alarm apexAlarmQamModuleRemovalFault. This trap is sent on a QAM Module Removal basis. Additional Info 1 carries the QAM Module number (1 to … | |
| 1.3.6.1.4.1.1166.1.31.0.8050 | NotificationtrapRtspControllerCommFault | current | See corresponding alarm apexAlarmRtspControllerCommFault. This trap is sent on a controller basis. Additional Info 1 carries the controller number. Additional … | |
| 1.3.6.1.4.1.1166.1.31.0.8060 | NotificationtrapRdsCommFault | current | See corresponding alarm apexAlarmRdsCommFault. Additional Info is not used. | |
| 1.3.6.1.4.1.1166.1.31.0.8070 | NotificationtrapRemCommFault | current | See corresponding alarm apexAlarmRemCommFault. This trap is sent on a summary basis. Additional Info is not used. | |
| 1.3.6.1.4.1.1166.1.31.0.8071 | NotificationtrapRemFault | current | See corresponding alarm apexAlarmRemFault. This trap is sent on a summary basis. Additional Info is not used. | |
| 1.3.6.1.4.1.1166.1.31.0.8080 | NotificationtrapDepiControlConnectionFault | current | See corresponding alarm apexAlarmDepiControlConnectionFault. This trap is sent on a summary basis. Additional Info is not used. | |
| 1.3.6.1.4.1.1166.1.31.0.8081 | NotificationtrapDepiSessionSetupFault | current | See corresponding alarm apexAlarmDepiSessionSetupFault. This trap is sent on a summary basis. Additional Info is not used. | |
| 1.3.6.1.4.1.1166.1.31.0.8082 | NotificationtrapDtiSyncLossFault | current | See corresponding alarm apexAlarmDtiSyncLossFault. This trap is sent on a summary basis. Additional Info is not used. | |
| 1.3.6.1.4.1.1166.1.31.0.8090 | NotificationtrapChassisRedundancyPrimaryFailover | current | See corresponding alarm apexAlarmChassisRedundancyPrimaryFailover. This trap is sent on a summary basis. Additional Info is not used. | |
| 1.3.6.1.4.1.1166.1.31.0.8091 | NotificationtrapChassisRedundancySecondaryFailover | current | See corresponding alarm apexAlarmChassisRedundancySecondaryFailover. This trap is sent on a summary basis. Additional Info is not used. | |
| 1.3.6.1.4.1.1166.1.31.0.8092 | NotificationtrapChassisRedundancyAvailabilityFault | current | See corresponding alarm apexAlarmChassisRedundancyAvailabilityFault. This trap is sent on a summary basis. Additional Info is not used. | |
| 1.3.6.1.4.1.1166.1.31.0.8093 | NotificationtrapChassisRedundancyLinkFault | current | See corresponding alarm apexAlarmChassisRedundancyLinkFault. This trap is sent on a summary basis. Additional Info is not used. | |
| 1.3.6.1.4.1.1166.1.31.0.8094 | NotificationtrapChassisRedundancyConfigurationFault | current | See corresponding alarm apexAlarmChassisRedundancyConfigurationFault. This trap is sent on a summary basis. Additional Info is not used. | |
| 1.3.6.1.4.1.1166.1.31.0.8100 | NotificationtrapEmUserLoginFailed | current | See corresponding event apexEventEmUserLoginFailed. Additional Info is not used. | |
| 1.3.6.1.4.1.1166.1.31.0.8101 | NotificationtrapQamModuleUpgraded | current | See corresponding event apexEventQamModuleUpgraded. Additional Info is not used. | |
| 1.3.6.1.4.1.1166.1.31.0.8102 | NotificationtrapSnmpCommunityStringChanged | current | This trap event is sent when read/read-write SNMP community strings are changed. See corresponding event 'apexEventSnmpCommunityStringChanged'. Severity level … | |
| 1.3.6.1.4.1.1166.1.31.0.8103 | NotificationtrapEasMessageNotReceived | current | This event is raised, if 'apexEasMessageReceiveTimeoutEventEnable' is enabled, when there is no EAS message received from any of the EAS sever configured in 'a… | |
| 1.3.6.1.4.1.1166.1.31.0.8104 | NotificationtrapLossOfInputAncillaryPidEvent | current | This trap is sent if apexEnableLossOfInputAncillaryPid enabled and if any of the input ancillary PID is not received for the duration 'apexPidMapInputAncillary… | |
| 1.3.6.1.4.1.1166.1.31.0.8110 | NotificationtrapChassisRedundancyPrimaryForceFailover | current | See corresponding event apexEventChassisRedunPrimaryForceFailover. Additional Info is not used. | |
| 1.3.6.1.4.1.1166.1.31.0.8111 | NotificationtrapChassisRedundancySecondaryForceFailover | current | See corresponding event apexEventChassisRedunSecondaryForceFailover. Additional Info is not used. | |
| 1.3.6.1.4.1.1166.1.31.0.8112 | NotificationtrapChassisRedundancyFirmwareVersionMismatch | current | See corresponding event apexEventChassisRedunFirmwareVersionMismatch. Additional Info is not used. | |
| 1.3.6.1.4.1.1166.1.31.0.8113 | NotificationtrapChassisRedundancyQAMVersionMismatch | current | See corresponding event apexEventChassisRedunQAMVersionMismatch. Additional Info is not used. | |
| 1.3.6.1.4.1.1166.1.31.1 | NodeapexSys | |||
| 1.3.6.1.4.1.1166.1.31.1.1 | NodeapexSysConfig | |||
| 1.3.6.1.4.1.1166.1.31.1.1.1 | NodeapexSysConfigGeneral | |||
| 1.3.6.1.4.1.1166.1.31.1.1.1.1 | ScalarapexSaveConfig | read-write | current | Writing this object will commit the current configuration to Flash. While a read returns the value savingConfigToFlash, the flash is being saved; the save may … |
| 1.3.6.1.4.1.1166.1.31.1.1.1.2 | ScalarapexProductName | read-write | current | This is the Product Name of the APEX loaded at initialization from the config.ini file. Specific configurations of the APEX have specific purposes and are iden… |
| 1.3.6.1.4.1.1166.1.31.1.1.1.3 | ScalarapexBootMethod | read-write | current | This parameter is used to set the boot method for the APEX. Selection of noDhcpOrBootp means the APEX will not use DHCP or BOOTP - this will result in about a … |
| 1.3.6.1.4.1.1166.1.31.1.1.1.4 | ScalarapexAutoRebootEnable | read-write | current | Setting to 'enabled' allows the APEX to automatically reboot when specific APEX hardware errors occur. Setting this to Enabled will cause the APEX to automatic… |
| 1.3.6.1.4.1.1166.1.31.1.1.2 | NodeapexSysConfigMcEmmInsertion | |||
| 1.3.6.1.4.1.1166.1.31.1.1.2.1 | ScalarapexMcEmmInsertionMode | read-write | current | Specify the mode in which MediaCipher EMMs are inserted, out of band or full in band. Once written, the change to this parameter will only take immediate effec… |
| 1.3.6.1.4.1.1166.1.31.1.1.2.2 | ScalarapexMcEmmInsertionPid1Enable | read-write | current | Enable/disable first EMM PID to include in the CAT for MediaCipher Full In Band mode. Default value is enabled. Once written, the change to this parameter will… |
| 1.3.6.1.4.1.1166.1.31.1.1.2.3 | ScalarapexMcEmmInsertionPid1 | read-write | current | First EMM PID to include in the CAT for MediaCipher Full In Band mode. Allowed values: from 0x1C00 to 0x1FFE. Default value is 0x1C02. Once written, the change… |
| 1.3.6.1.4.1.1166.1.31.1.1.2.4 | ScalarapexMcEmmInsertionPid2Enable | read-write | current | Enable/disable first EMM PID to include in the CAT for MediaCipher Full In Band mode. Default value is disabled. Once written, the change to this parameter wil… |
| 1.3.6.1.4.1.1166.1.31.1.1.2.5 | ScalarapexMcEmmInsertionPid2 | read-write | current | Second EMM PID to include in the CAT for MediaCipher Full In Band mode. Allowed values: from 0x1C00 to 0x1FFE. Default value is 0x1C03. Once written, the chang… |
| 1.3.6.1.4.1.1166.1.31.1.1.2.6 | ScalarapexMcEmmInsertionApplyChange | read-write | current | The Apply for the MediaCipher EMM Insertion group. This parameter MUST be set to 'apply' in order for any of the data in the MC EMM Insertion group to take eff… |
| 1.3.6.1.4.1.1166.1.31.1.2 | NodeapexSysStatus | |||
| 1.3.6.1.4.1.1166.1.31.1.2.1 | NodeapexSysStatusGeneral | |||
| 1.3.6.1.4.1.1166.1.31.1.2.1.1 | ScalarapexBootReason | read-only | current | Indicates reason for APEX boot: 'powerCycle' - Power-up or power cycled. 'operatorReboot' - Operator commanded reboot (refer to manual). 'hwFault' - Automatic … |
| 1.3.6.1.4.1.1166.1.31.1.2.1.2 | ScalarapexMaxServiceMappings | read-only | current | Maximum number of service mappings supported by the APEX. |
| 1.3.6.1.4.1.1166.1.31.1.2.2 | NodeapexSysStatusVersions | |||
| 1.3.6.1.4.1.1166.1.31.1.2.2.1 | ScalarapexHostProcessorBootCodeVersion | read-only | current | APEX Host Processor Boot Code Version. |
| 1.3.6.1.4.1.1166.1.31.1.2.2.2 | ScalarapexMuxFpgaVersion | read-only | current | APEX MUX FPGA Version. |
| 1.3.6.1.4.1.1166.1.31.1.2.2.3 | ScalarapexMuxFpgaEncryption | read-only | current | APEX MUX FPGA Encryption type currently loaded. |
| 1.3.6.1.4.1.1166.1.31.1.2.2.4 | ScalarapexMainBoardVersion | read-only | current | APEX Main Board Version. This is the revision of the apexMainBoardType. |
| 1.3.6.1.4.1.1166.1.31.1.2.2.5 | ScalarapexHostApplicationDate | read-only | current | APEX Host Processor Application Creation Date. |
| 1.3.6.1.4.1.1166.1.31.1.2.2.6 | ScalarapexProductType | read-only | current | APEX Product Type. The corresponding product name text setting can be found in identUnitModel. |
| 1.3.6.1.4.1.1166.1.31.1.2.2.7 | ScalarapexMainBoardType | read-only | current | APEX Main Board Type. The revision is found in apexMainBoardVersion. |
| 1.3.6.1.4.1.1166.1.31.1.2.2.8 | ScalarapexGlueFpgaVersion | read-only | current | APEX Glue FPGA Version. |
| 1.3.6.1.4.1.1166.1.31.1.2.2.9 | ScalarapexGlueCpldVersion | read-only | current | APEX Glue CPLD Version. |
| 1.3.6.1.4.1.1166.1.31.1.2.2.10 | ScalarapexDtiFpgaVersion | read-only | current | APEX DTI FPGA Version. |
| 1.3.6.1.4.1.1166.1.31.1.2.2.11 | ScalarapexMpc2FpgaVersion | read-only | current | APEX MPC2 FPGA Version. |
| 1.3.6.1.4.1.1166.1.31.1.2.2.12 | ScalarapexDpmVersion | read-only | current | APEX DPM Version. |
| 1.3.6.1.4.1.1166.1.31.2 | NodeapexTime | |||
| 1.3.6.1.4.1.1166.1.31.2.1 | NodeapexTimeConfig | |||
| 1.3.6.1.4.1.1166.1.31.2.1.1 | NodeapexTimeConfigGeneral | |||
| 1.3.6.1.4.1.1166.1.31.2.1.1.1 | ScalarapexTimeSource | read-write | current | The source for system time. The time source can be configured to come from an SNTP time source, or be generated internally. When configured as internal: - The … |
| 1.3.6.1.4.1.1166.1.31.2.1.1.2 | ScalarapexSntpUtcOffset | read-write | current | The value of this object is the Universal Time Coordinated (UTC) offset from GPS time. Subtract this from GPS time to convert from GPS to UTC. Units are second… |
| 1.3.6.1.4.1.1166.1.31.2.1.1.3 | ScalarapexSntpServerSpecified | read-write | current | When the TimeSource is SNTP, this object specifies whether the APEX will only accept time for a single SNTP server or from any server that broadcasts time. Whe… |
| 1.3.6.1.4.1.1166.1.31.2.1.1.4 | ScalarapexSntpServerIpAddr | read-write | current | This contains the IP address of the specified SNTP server. If apexTimeSource is SNTP and apexSntpServerSpecified is set to specified, then the apex will poll f… |
| 1.3.6.1.4.1.1166.1.31.2.1.1.5 | ScalarapexUserSuppliedTime | read-write | current | The value of this object is the GPS Time the APEX is given via user entry. The time is reported in GPS seconds. This time is ONLY used when the APEX is set to … |
| 1.3.6.1.4.1.1166.1.31.2.2 | NodeapexTimeStatus | |||
| 1.3.6.1.4.1.1166.1.31.2.2.1 | NodeapexTimeStatusGeneral | |||
| 1.3.6.1.4.1.1166.1.31.2.2.1.1 | ScalarapexSystemTime | read-only | current | The value of this object is the current System Time of the APEX. The system time is reported in GPS seconds. To determine the APEXs system time in UTC the apex… |
| 1.3.6.1.4.1.1166.1.31.2.2.1.8 | ScalarapexOperationalTime | read-only | current | The Operational Time is the time in seconds since the APEX completed the boot sequence. It is the time that the APEX has been operational. |
| 1.3.6.1.4.1.1166.1.31.3 | NodeapexTemperature | |||
| 1.3.6.1.4.1.1166.1.31.3.1 | NodeapexTemperatureConfig | |||
| 1.3.6.1.4.1.1166.1.31.3.1.1 | NodeapexTemperatureConfigGeneral | |||
| 1.3.6.1.4.1.1166.1.31.3.2 | NodeapexTemperatureStatus | |||
| 1.3.6.1.4.1.1166.1.31.3.2.1 | NodeapexTemperatureStatusGeneral | |||
| 1.3.6.1.4.1.1166.1.31.3.2.2 | NodeapexMainBoardTemperature | |||
| 1.3.6.1.4.1.1166.1.31.3.2.2.1 | ScalarapexMainBoardTempFrontIntake | read-only | current | Ambient temperature at the intake vent at the front of the unit. Measured in whole number degrees Celsius. |
| 1.3.6.1.4.1.1166.1.31.3.2.2.2 | ScalarapexMainBoardTempMuxFpga | read-only | current | Ambient temperature at the MUX FPGAs. Measured in whole number degrees Celsius. |
| 1.3.6.1.4.1.1166.1.31.3.2.2.3 | ScalarapexMainBoardTempAcpModule | read-only | current | Ambient temperature at the ACP Module location. This reading is valid for all models whether an ACP Module is standard on the model. Measured in whole number d… |
| 1.3.6.1.4.1.1166.1.31.3.2.2.4 | ScalarapexMainBoardTempHostProcessor | read-only | current | Ambient temperature at the Host Processor. Measured in whole number degrees Celsius. |
| 1.3.6.1.4.1.1166.1.31.3.2.3 | NodeapexMainBoardTemperatureFault | |||
| 1.3.6.1.4.1.1166.1.31.3.2.3.1 | ScalarapexMainBoardTempFrontIntakeFault | read-only | current | Fault status of ambient temperature at the intake vent at the front of the unit. |
| 1.3.6.1.4.1.1166.1.31.3.2.3.2 | ScalarapexMainBoardTempMuxFpgaFault | read-only | current | Fault status of ambient temperature at the MUX FPGAs. |
| 1.3.6.1.4.1.1166.1.31.3.2.3.3 | ScalarapexMainBoardTempAcpModuleFault | read-only | current | Fault status of ambient temperature at the ACP Module location. |
| 1.3.6.1.4.1.1166.1.31.3.2.3.4 | ScalarapexMainBoardTempHostProcessorFault | read-only | current | Fault status of ambient temperature at the Host Processor. |
| 1.3.6.1.4.1.1166.1.31.4 | NodeapexPowerSupply | |||
| 1.3.6.1.4.1.1166.1.31.4.1 | NodeapexPsConfig | |||
| 1.3.6.1.4.1.1166.1.31.4.1.1 | NodeapexPsConfigGeneral | |||
| 1.3.6.1.4.1.1166.1.31.4.1.1.1 | ScalarapexPsPowerFaultFilter | read-write | current | This setting enables or disables apexPsPowerFaultFilter. When set to 'enabled', the device ignore the power fault alarm for two consecutive positive samples of… |
| 1.3.6.1.4.1.1166.1.31.4.2 | NodeapexPsStatus | |||
| 1.3.6.1.4.1.1166.1.31.4.2.1 | NodeapexPsStatusGeneral | |||
| 1.3.6.1.4.1.1166.1.31.4.2.2 | TableapexPsStatusTable | not-accessible | current | This is a table of status parameters for the two Power Supplies. |
| 1.3.6.1.4.1.1166.1.31.4.2.2.1 | RowapexPsStatusEntry | not-accessible | current | Power Supply Status Table Entry. |
| 1.3.6.1.4.1.1166.1.31.4.2.2.1.1 | ColumnapexPsStatusPsNum | not-accessible | current | PS Number. |
| 1.3.6.1.4.1.1166.1.31.4.2.2.1.2 | ColumnapexPsStatusInstalled | read-only | current | This parameter indicates installed status of the PS. |
| 1.3.6.1.4.1.1166.1.31.4.2.2.1.3 | ColumnapexPsStatusOutputVoltage | read-only | current | PS measured output voltage in milli-Volts. |
| 1.3.6.1.4.1.1166.1.31.4.2.2.1.4 | ColumnapexPsStatusOutputCurrent | read-only | current | PS measured output current in milli-Amps. |
| 1.3.6.1.4.1.1166.1.31.4.2.2.1.5 | ColumnapexPsStatusFanSpeed | read-only | current | The fan speed in RPM an installed Power Supply or Fan Module. Zero if not installed. |
| 1.3.6.1.4.1.1166.1.31.4.2.2.1.6 | ColumnapexPsStatusFanStatus | read-only | current | PS Fan Status. |
| 1.3.6.1.4.1.1166.1.31.4.2.2.1.7 | ColumnapexPsStatusTemperatureStatus | read-only | current | Indicates whether the power supply is in protection mode due to an over temperature condition. The PS is shut down while in 'overTemp' and will recover when th… |
| 1.3.6.1.4.1.1166.1.31.4.2.2.1.8 | ColumnapexPsStatusInputPowerStatus | read-only | current | Indicates whether AC Input is within specification. Note that Output Power Status will be 'error' when Input Power status is 'error' |
| 1.3.6.1.4.1.1166.1.31.4.2.2.1.9 | ColumnapexPsStatusOutputPowerStatus | read-only | current | Indicates whether the +12V and +3.3V output power are within specification. If the output power error occurs with an Input Power error, apply input power to re… |
| 1.3.6.1.4.1.1166.1.31.4.2.2.1.10 | ColumnapexPsStatusErrorStatus | read-only | current | Summary of errors reported on a power supply basis. The reported error will be the most severe. |
| 1.3.6.1.4.1.1166.1.31.4.2.2.1.11 | ColumnapexPsStatusFaultCondition | read-only | current | Current fault condition of the power supply errors. |
| 1.3.6.1.4.1.1166.1.31.4.2.2.1.12 | ColumnapexPsStatusDiagnosticData1 | read-only | current | Diagnostic data word 1 (HP) - Contents for Arris diagnostic purposes. |
| 1.3.6.1.4.1.1166.1.31.4.2.2.1.13 | ColumnapexPsStatusDiagnosticData2 | read-only | current | Diagnostic data word 2 (PS) - Contents for Arris diagnostic purposes. |
| 1.3.6.1.4.1.1166.1.31.4.2.2.1.14 | ColumnapexPsStatusCommError | read-only | current | Communication with the Power Supply has failed and status cannot be determined. Only applies when valid PS installed. |
| 1.3.6.1.4.1.1166.1.31.4.2.3 | TableapexPsStatusVersionsTable | not-accessible | current | This is a table of version status parameters for the two Power Supplies. |
| 1.3.6.1.4.1.1166.1.31.4.2.3.1 | RowapexPsStatusVersionsEntry | not-accessible | current | Power Supply Version Status Table Entry. |
| 1.3.6.1.4.1.1166.1.31.4.2.3.1.1 | ColumnapexPsStatusVersionsPsNum | not-accessible | current | PS Number. |
| 1.3.6.1.4.1.1166.1.31.4.2.3.1.2 | ColumnapexPsStatusVersionsModel | read-only | current | PS Model. |
| 1.3.6.1.4.1.1166.1.31.4.2.3.1.3 | ColumnapexPsStatusVersionsSerialNumber | read-only | current | PS serial number. |
| 1.3.6.1.4.1.1166.1.31.5 | NodeapexAsi | |||
| 1.3.6.1.4.1.1166.1.31.5.1 | NodeapexAsiConfig | |||
| 1.3.6.1.4.1.1166.1.31.5.1.2 | NodeapexAsiMonitorPortConfig | |||
| 1.3.6.1.4.1.1166.1.31.5.1.2.1 | ScalarapexAsiMonitorPortOutputTsNum | read-write | current | The number of the output transport stream to route to the ASI Monitor Port. Zero indicates that no stream is to be routed to the ASI Monitor port. Once written… |
| 1.3.6.1.4.1.1166.1.31.5.1.2.2 | ScalarapexAsiMonitorPortEncryption | read-write | current | Selects pre or post encryption for the ASI monitor port. This parameter is only applicable to APEXs with encryption capability. Once written, the change to thi… |
| 1.3.6.1.4.1.1166.1.31.6 | NodeapexFastEnet | |||
| 1.3.6.1.4.1.1166.1.31.6.1 | NodeapexFastEnetConfig | |||
| 1.3.6.1.4.1.1166.1.31.6.1.1 | NodeapexFastEnetConfigGeneral | |||
| 1.3.6.1.4.1.1166.1.31.6.1.1.1 | ScalarapexFastEnetDefaultGateway | read-write | current | This is the IP address of the default gateway for the Fast Ethernet interfaces. This should be zero or a valid Class A, B, or C IP address. Once written, a sav… |
| 1.3.6.1.4.1.1166.1.31.6.1.1.2 | TableapexFastEnetInsertRateTable | not-accessible | current | This is a table of configuration parameters for Output Transport Rate of Fast Ethernet MPEG data Insertion. |
| 1.3.6.1.4.1.1166.1.31.6.1.1.2.1 | RowapexFastEnetInsertRateEntry | not-accessible | current | Output Transport Rate of Fast Ethernet MPEG Insertion Configuration Table Entry. |
| 1.3.6.1.4.1.1166.1.31.6.1.1.2.1.1 | ColumnapexFastEnetInsertRateOutputTsNum | not-accessible | current | Output Transport Stream Number. |
| 1.3.6.1.4.1.1166.1.31.6.1.1.2.1.2 | ColumnapexFastEnetInsertRate | read-write | current | Insertion Rate for the transport stream for Fast Ethernet MPEG data. Maximum MPEG data rate to insert data received via Fast Ethernet interfaces. Range is 0 Kb… |
| 1.3.6.1.4.1.1166.1.31.6.1.1.3 | ScalarapexFastEnetRoutingApplyChange | read-write | current | The Apply for the Fast Ethernet Static Routing Table. This parameter MUST be set to 'apply' in order for any of the data in the apexFastEnetRoutingTable to tak… |
| 1.3.6.1.4.1.1166.1.31.6.1.2 | TableapexFastEnetRoutingTable | not-accessible | current | This table is the configuration Static Routing table for the Fast Ethernet Interface. @Commit(param=apexFastEnetRoutingApplyChange, value=2) @Config(config=yes… |
| 1.3.6.1.4.1.1166.1.31.6.1.2.1 | RowapexFastEnetRoutingEntry | not-accessible | current | Fast Ethernet Interface Configuration Static Routing Table Entry. |
| 1.3.6.1.4.1.1166.1.31.6.1.2.1.1 | ColumnapexFastEnetRoutingIndex | not-accessible | current | The index of the Routing table entry. Currently limited to 16. |
| 1.3.6.1.4.1.1166.1.31.6.1.2.1.2 | ColumnapexFastEnetRoutingDestinIp | read-write | current | The Fast Ethernet Routing Destination IP address. Once written, the change to this parameter will only take immediate effect after apexFastEnetRoutingApplyChan… |
| 1.3.6.1.4.1.1166.1.31.6.1.2.1.3 | ColumnapexFastEnetRoutingGatewayIp | read-write | current | The Fast Ethernet Routing Gateway IP address. Once written, the change to this parameter will only take immediate effect after apexFastEnetRoutingApplyChange i… |
| 1.3.6.1.4.1.1166.1.31.6.1.2.1.4 | ColumnapexFastEnetRoutingSubnetMask | read-write | current | The Fast Ethernet Routing Subnet Mask. Once written, the change to this parameter will only take immediate effect after apexFastEnetRoutingApplyChange is set t… |
| 1.3.6.1.4.1.1166.1.31.6.2 | NodeapexFastEnetStatus | |||
| 1.3.6.1.4.1.1166.1.31.6.2.1 | NodeapexFastEnetStatusGeneral | |||
| 1.3.6.1.4.1.1166.1.31.6.2.1.1 | ScalarapexFastEnetMaxInputUdpPorts | read-only | current | Maximum number of Fast Ethernet input UDP ports that can be opened on this APEX. |
| 1.3.6.1.4.1.1166.1.31.6.2.2 | TableapexFastEnetStatusPacketsTable | not-accessible | current | Table of Fast Ethernet Insert Packet Statistics for each Fast Ethernet interface. Indexed by FE interface port number. |
| 1.3.6.1.4.1.1166.1.31.6.2.2.1 | RowapexFastEnetStatusPacketsEntry | not-accessible | current | A row in the FE Insert Packets table. |
| 1.3.6.1.4.1.1166.1.31.6.2.2.1.1 | ColumnapexFastEnetPacketsPortNum | not-accessible | current | Fast Ethernet interface port Number. |
| 1.3.6.1.4.1.1166.1.31.6.2.2.1.2 | ColumnapexFastEnetPacketsNumPkts | read-only | current | Number of MPEG packets inserted during the last monitoring period (currently 5 seconds) on this FE interface port. |
| 1.3.6.1.4.1.1166.1.31.6.2.2.1.3 | ColumnapexFastEnetPacketsTotPkts | read-only | current | Total number of MPEG packets inserted on this FE interface port. |
| 1.3.6.1.4.1.1166.1.31.6.2.2.1.4 | ColumnapexFastEnetPacketsNumDiscarded | read-only | current | Number of MPEG packets discarded during the last monitoring period (currently 5 seconds) on this FE interface port. This may be due to a buffer overflow or inc… |
| 1.3.6.1.4.1.1166.1.31.6.2.2.1.5 | ColumnapexFastEnetPacketsTotDiscarded | read-only | current | Total number of FE MPEG packets discarded on this Output Transport Stream. Discarded packets on an FE interface port are those packets discarded due to an over… |
| 1.3.6.1.4.1.1166.1.31.6.2.3 | TableapexFastEnetInsertPacketsTable | not-accessible | current | Table of Output Transport Stream FE Insert Packet Statistics. Indexed by Output Transport Stream number. |
| 1.3.6.1.4.1.1166.1.31.6.2.3.1 | RowapexFastEnetInsertPacketsEntry | not-accessible | current | A row in the Output Transport Stream FE Insert Packets table. |
| 1.3.6.1.4.1.1166.1.31.6.2.3.1.1 | ColumnapexFastEnetInsPacketsOutputTsNum | not-accessible | current | Output Transport Stream Number. |
| 1.3.6.1.4.1.1166.1.31.6.2.3.1.2 | ColumnapexFastEnetInsPacketsNumPkts | read-only | current | Number of MPEG packets inserted during the last monitoring period (currently 5 seconds) on this Output Transport Stream. |
| 1.3.6.1.4.1.1166.1.31.6.2.3.1.3 | ColumnapexFastEnetInsPacketsTotPkts | read-only | current | Total number of MPEG packets inserted on this Output Transport Stream. |
| 1.3.6.1.4.1.1166.1.31.6.2.3.1.4 | ColumnapexFastEnetInsPacketsNumDiscarded | read-only | current | Number of MPEG packets discarded during the last monitoring period (currently 5 seconds) on this Output Transport Stream. This may be due to a buffer overflow … |
| 1.3.6.1.4.1.1166.1.31.6.2.3.1.5 | ColumnapexFastEnetInsPacketsTotDiscarded | read-only | current | Total number of FE MPEG packets discarded on this Output Transport Stream. Discarded packets on an output stream are those packets discarded due to an overflow… |
| 1.3.6.1.4.1.1166.1.31.6.3 | NodeapexOamp | |||
| 1.3.6.1.4.1.1166.1.31.6.3.1 | NodeapexOampConfig | |||
| 1.3.6.1.4.1.1166.1.31.6.3.1.1 | NodeapexOampConfigGeneral | |||
| 1.3.6.1.4.1.1166.1.31.6.3.1.1.1 | ScalarapexOampIpAddr | read-write | current | This is the IP address of the OAMP IP (Enet1) interface of the APEX. This IP address is set via a BootP when connected to a Bootp server. When not connected to… |
| 1.3.6.1.4.1.1166.1.31.6.3.1.1.2 | ScalarapexOampSubnetMask | read-write | current | This is subnet mask of the OAMP IP (Enet1) interface of the APEX. The subnet mask is normally via a BootP when connected to a BootP server. When not connected … |
| 1.3.6.1.4.1.1166.1.31.6.3.1.1.3 | ScalarapexOampAutoNegotiate | read-write | current | OAMP IP (Enet1) Ethernet Auto-Negotiation setting. Once written, a save must be performed via the apexSaveConfig parameter and the APEX must be rebooted for th… |
| 1.3.6.1.4.1.1166.1.31.6.3.1.1.4 | ScalarapexOampNetworkDuplexMode | read-write | current | OAMP (Enet1) Ethernet Network Duplex Mode. Enet1 is set to the configured mode, only if 'apexOampAutoNegotiate' is disabled. Default value is full duplex mode.… |
| 1.3.6.1.4.1.1166.1.31.6.3.1.1.5 | ScalarapexOampNetworkSpeed | read-write | current | OAMP (Enet1) Ethernet Network Speed. Enet1 is set to the configured speed, only if 'apexOampAutoNegotiate' is disabled. Default value is 100 Mbps. Once written… |
| 1.3.6.1.4.1.1166.1.31.6.3.2 | NodeapexOampStatus | |||
| 1.3.6.1.4.1.1166.1.31.6.3.2.1 | NodeapexOampStatusGeneral | |||
| 1.3.6.1.4.1.1166.1.31.6.3.2.1.1 | ScalarapexOampMacAddr | read-only | current | This is the MAC address of the APEX OAMP IP (Enet1) Interface. It is set at the factory and cannot be changed. The string length is 17 characters in the format… |
| 1.3.6.1.4.1.1166.1.31.6.3.2.1.2 | ScalarapexOampSpeed | read-only | current | OAMP IP (Enet1) Ethernet speed (10Mbps or 100Mbps). This is determined by the results of the auto-negotiation process. If auto-negotiation fails, the default s… |
| 1.3.6.1.4.1.1166.1.31.6.3.2.1.3 | ScalarapexOampDuplexMode | read-only | current | OAMP IP (Enet1) Ethernet Duplex Mode (full or half) This is determined by the results of the auto-negotiation process. If auto-negotiation fails, the default m… |
| 1.3.6.1.4.1.1166.1.31.6.3.2.1.4 | ScalarapexOampInputTsAssignedCount | read-only | current | Number of input transport streams assigned to the OAMP IP interface (Enet1). |
| 1.3.6.1.4.1.1166.1.31.6.3.2.1.5 | ScalarapexOampLinkActive | read-only | current | This indicates if the OAMP (ENET1) link is active. |
| 1.3.6.1.4.1.1166.1.31.6.3.2.1.6 | ScalarapexOampCurrentAutoNegotiateState | read-only | current | Current auto-negotiation status on OAMP network |
| 1.3.6.1.4.1.1166.1.31.6.4 | NodeapexDataIp | |||
| 1.3.6.1.4.1.1166.1.31.6.4.1 | NodeapexDataIpConfig | |||
| 1.3.6.1.4.1.1166.1.31.6.4.1.1 | NodeapexDataIpConfigGeneral | |||
| 1.3.6.1.4.1.1166.1.31.6.4.1.1.1 | ScalarapexDataIpAddr | read-write | current | This is the IP address of the Data IP (Enet2) interface of this APEX. The data IP address may directly be changed by setting this parameter. The Data IP addres… |
| 1.3.6.1.4.1.1166.1.31.6.4.1.1.2 | ScalarapexDataIpSubnetMask | read-write | current | This is subnet mask of the Data IP (Enet2) interface of this APEX. The data IP Subnet Mask may directly be changed by setting this parameter. Once written, a s… |
| 1.3.6.1.4.1.1166.1.31.6.4.1.1.3 | ScalarapexDataIpAutoNegotiate | read-write | current | Data IP (Enet2) Ethernet Auto-Negotiation setting. Once written, a save must be performed via the apexSaveConfig parameter and the APEX must be rebooted for th… |
| 1.3.6.1.4.1.1166.1.31.6.4.1.1.4 | ScalarapexDataIpNetworkDuplexMode | read-write | current | DATA IP (Enet2) Ethernet Network Duplex Mode. Enet2 is set to the configured mode, only if 'apexDataIpAutoNegotiate'is disabled. Default value is full duplex m… |
| 1.3.6.1.4.1.1166.1.31.6.4.1.1.5 | ScalarapexDataIpNetworkSpeed | read-write | current | DATA IP (Enet2) Ethernet Network Speed. Enet2 is set to the configured speed, only if 'apexDataIpAutoNegotiate'is disabled. Default value is 100 Mbps. Once wri… |
| 1.3.6.1.4.1.1166.1.31.6.4.2 | NodeapexDataIpStatus | |||
| 1.3.6.1.4.1.1166.1.31.6.4.2.1 | NodeapexDataIpStatusGeneral | |||
| 1.3.6.1.4.1.1166.1.31.6.4.2.1.1 | ScalarapexDataIpMacAddr | read-only | current | This is the MAC address of the APEX Data IP (Enet2) Interface. It is set at the factory and cannot be changed. The string length is 17 characters in the format… |
| 1.3.6.1.4.1.1166.1.31.6.4.2.1.2 | ScalarapexDataIpSpeed | read-only | current | Data IP (Enet2) Ethernet speed (10Mbps or 100Mbps). This is determined by the results of the auto-negotiation process. If auto-negotiation fails, the default s… |
| 1.3.6.1.4.1.1166.1.31.6.4.2.1.3 | ScalarapexDataIpDuplexMode | read-only | current | Data IP (Enet2) Ethernet Duplex Mode (full or half) This is determined by the results of the auto-negotiation process. If auto-negotiation fails, the default m… |
| 1.3.6.1.4.1.1166.1.31.6.4.2.1.4 | ScalarapexDataIpInputTsAssignedCount | read-only | current | Number of input transport streams assigned to the Data IP interface. |
| 1.3.6.1.4.1.1166.1.31.6.4.2.1.5 | ScalarapexDataIpAddrInUse | read-only | current | Indicates the IP Address currently being used by the Data IP port (Enet2). This parameter will be either apexDataIpAddr or an APEX selected IP address. Refer t… |
| 1.3.6.1.4.1.1166.1.31.6.4.2.1.6 | ScalarapexDataIpSubnetMaskInUse | read-only | current | Indicates the Subnet Mask currently being used by the Data IP port (Enet2). This parameter will be either apexDataIpSubnetMask or an APEX selected mask. Refer … |
| 1.3.6.1.4.1.1166.1.31.6.4.2.1.7 | ScalarapexDataIpInUseReason | read-only | current | Reason for apexDataIpAddrInUse and apexDataIpSubnetMaskInUse Data IP (Enet2) parameters. 'notApplicable' - Enet2 not configured by user or for REM connection. … |
| 1.3.6.1.4.1.1166.1.31.6.4.2.1.8 | ScalarapexDataIpLinkActive | read-only | current | This indicates if the DataIP (ENET2) link is active. |
| 1.3.6.1.4.1.1166.1.31.6.4.2.1.9 | ScalarapexDataIpCurrentAutoNegotiateState | read-only | current | Current auto-negotiation status on DATA IP network |
| 1.3.6.1.4.1.1166.1.31.7 | NodeapexGbe | |||
| 1.3.6.1.4.1.1166.1.31.7.1 | NodeapexGbeConfig | |||
| 1.3.6.1.4.1.1166.1.31.7.1.1 | NodeapexGbeConfigGeneral | |||
| 1.3.6.1.4.1.1166.1.31.7.1.1.1 | ScalarapexGbeDefaultGateway1 | read-write | current | This is the IP address of the default gateway for Gigabit Ethernet interfaces 1 and 2. Once written, the change to this parameter will take immediate effect. H… |
| 1.3.6.1.4.1.1166.1.31.7.1.1.2 | ScalarapexGbeDefaultGateway2 | read-write | current | This is the IP address of the default gateway for Gigabit Ethernet interfaces 3 and 4. Once written, the change to this parameter will take immediate effect. H… |
| 1.3.6.1.4.1.1166.1.31.7.1.1.3 | ScalarapexGbeJitterAbsorption | read-write | obsolete | This object is obsolete. Jitter Absorption setting in range of 0 to 200 milliseconds in increments of 5 ms. A change to this parameter will cause the Gigabit E… |
| 1.3.6.1.4.1.1166.1.31.7.1.1.4 | ScalarapexGbeGarpPeriodicity | read-write | current | Gratuitous ARP period in range of 20 to 300 seconds. Once written, the change to this parameter will take immediate effect. However, in order for the change to… |
| 1.3.6.1.4.1.1166.1.31.7.1.1.5 | ScalarapexGbeConfigTableApplyChange | read-write | current | The Apply for the Gigabit Ethernet Configuration Table. This parameter MUST be set to 'apply' in order for any of the data in the apexGbeConfigTable to take ef… |
| 1.3.6.1.4.1.1166.1.31.7.1.1.6 | ScalarapexGbeNominalBufferLevel | read-write | current | Gigabit Ethernet Nominal Buffer Level. Range of 50 to 475 milliseconds in increments of 5 ms. A change to this parameter will cause the Gigabit Ethernet proces… |
| 1.3.6.1.4.1.1166.1.31.7.1.1.7 | ScalarapexGbeInputDataTsSmoothingPeriod | read-write | current | Input Data stream smoothing period. Amount of time in milliseconds over which the GigE will smooth out input streams that do not contain PCRs. This allows the … |
| 1.3.6.1.4.1.1166.1.31.7.1.1.8 | ScalarapexGbeInputDataTsBufferDepth | read-write | current | GBE Input Data stream buffer depth. Amount of time in milliseconds that the GigE will buffer input streams that do not contain PCRs. This allows the GigE to bu… |
| 1.3.6.1.4.1.1166.1.31.7.1.1.9 | ScalarapexGbeConfigInputDataTsApplyText | read-only | current | When apexGbeConfigInputDataTsApplyChange is set to 'applyNotInProgressInvalidData' this entry may contain a text description of what was wrong with the data. T… |
| 1.3.6.1.4.1.1166.1.31.7.1.1.10 | ScalarapexGbeConfInputUnicastTimeout | read-write | current | Loss of input stream timeout value (in milliseconds) for unicast inputs. This determines the amount of time a unicast input stream is missing before the APEX w… |
| 1.3.6.1.4.1.1166.1.31.7.1.1.11 | ScalarapexGbeConfInputMulticastTimeout | read-write | current | Loss of input stream timeout value (in milliseconds) for multicast inputs. This determines the amount of time a unicast input stream is missing before the APEX… |
| 1.3.6.1.4.1.1166.1.31.7.1.1.12 | ScalarapexGbeConfLossOfInputTsType | read-write | current | Loss of input stream type. Determines if detection of loss of an input stream is based on data rate or stream rate. Data rate includes only non-null MPEG packe… |
| 1.3.6.1.4.1.1166.1.31.7.1.2 | TableapexGbeConfigTable | not-accessible | current | This is a table of configuration parameters for the Gigabit Ethernet Interfaces. Once written, the change to this table will only take immediate effect after a… |
| 1.3.6.1.4.1.1166.1.31.7.1.2.1 | RowapexGbeConfigEntry | not-accessible | current | Gigabit Ethernet Interface Configuration Table Entry. |
| 1.3.6.1.4.1.1166.1.31.7.1.2.1.1 | ColumnapexGbeConfigInterfaceNum | not-accessible | current | Gigabit Ethernet Interface Number. |
| 1.3.6.1.4.1.1166.1.31.7.1.2.1.2 | ColumnapexGbeConfigEnable | read-write | current | This parameter enables the Gigabit Ethernet Interface. |
| 1.3.6.1.4.1.1166.1.31.7.1.2.1.3 | ColumnapexGbeConfigIpAddr | read-write | current | This is the IP address of this Gigabit Ethernet interface. It is recommended that each Gigabit Ethernet interface be on a different subnet. Each must be given … |
| 1.3.6.1.4.1.1166.1.31.7.1.2.1.4 | ColumnapexGbeConfigIpSubnetMask | read-write | current | This is subnet mask of this Gigabit Ethernet interface. |
| 1.3.6.1.4.1.1166.1.31.7.1.2.1.5 | ColumnapexGbeConfigAutoNegotiate | read-write | current | Auto negotiation enabled or disabled. |
| 1.3.6.1.4.1.1166.1.31.7.1.3 | TableapexGbeConfigFrameBufferTable | not-accessible | current | This is a table of configuration parameters related to Gigabit Ethernet Frame Buffer statistics gathering. @Config(config=yes, reboot=no) @Save(apexSaveConfig,… |
| 1.3.6.1.4.1.1166.1.31.7.1.3.1 | RowapexGbeConfigFrameBufferEntry | not-accessible | current | Gigabit Ethernet Frame Buffer Configuration Table Entry. |
| 1.3.6.1.4.1.1166.1.31.7.1.3.1.1 | ColumnapexGbeConfigFrameBufferProcessorNum | not-accessible | current | Gigabit Ethernet Processor Number. Proc 1 = GBE Interfaces 1 and 2 Proc 2 = GBE Interfaces 3 and 4 |
| 1.3.6.1.4.1.1166.1.31.7.1.3.1.2 | ColumnapexGbeConfigFrameBufferMaxInDataRate | read-write | current | Maximum Gigabit Ethernet MPEG input data rate in bps. This is the total amount of MPEG data expected to be received by Gigabit Ethernet frame interfaces on the… |
| 1.3.6.1.4.1.1166.1.31.7.1.3.1.3 | ColumnapexGbeConfigFrameBufferAlarmThreshold | read-write | current | User defined threshold representing a percentage of frame buffer depth. The frame buffer level is monitored by the APEX and the maximum level is based on the a… |
| 1.3.6.1.4.1.1166.1.31.7.1.4 | NodeapexGbeConfigInputRedundancy | |||
| 1.3.6.1.4.1.1166.1.31.7.1.4.1 | NodeapexGbeConfigInputRedundancyGeneral | |||
| 1.3.6.1.4.1.1166.1.31.7.1.4.1.1 | ScalarapexGbeConfInRedundMonitorPeriod | read-write | current | This is the time in seconds over which Redundant Gigabit Ethernet Input Transport Stream Pairs will be monitored. Range is 1 to 30 seconds. Primary to Secondar… |
| 1.3.6.1.4.1.1166.1.31.7.1.4.1.2 | ScalarapexGbeConfInRedundSwitchTime | read-write | current | This is the time in seconds to wait before switching back to the Primary of a Redundant Gigabit Ethernet Input TS pair after the Primary is healthy. Range is 0… |
| 1.3.6.1.4.1.1166.1.31.7.1.4.1.3 | ScalarapexGbeConfInRedundAutoSwitchBack | read-write | current | This is the enable/disable of automatic switch back from Secondary to Primary for Gigabit Ethernet redundancy. When 'enabled', switch back to the Primary will … |
| 1.3.6.1.4.1.1166.1.31.7.1.4.1.4 | ScalarapexGbeConfInRedundForceToSecondary | read-write | current | The Gigabit Ethernet Redundant Pair force switch any pair that is currently on the Primary to the Secondary. This will have no effect if the corresponding row … |
| 1.3.6.1.4.1.1166.1.31.7.1.4.1.5 | ScalarapexGbeConfInRedundForceToPrimary | read-write | current | The Gigabit Ethernet Redundant Pair force switch any pair that is currently on the Secondary to the Primary. This will have no effect if the corresponding row … |
| 1.3.6.1.4.1.1166.1.31.7.1.4.1.6 | ScalarapexGbeConfInRedundManualRouteRedundType | read-write | current | The redundancy type for output streams in Manual Routing operating mode. - hotWarm indicates only 1 input stream, primary or secondary, is open at any one time… |
| 1.3.6.1.4.1.1166.1.31.7.1.5 | TableapexGbeConfigInputDataTsTable | not-accessible | current | Table of data for GBE input data stream identification. Each entry in this table identifies a Gigabit Ethernet input stream that is a data stream only. Data st… |
| 1.3.6.1.4.1.1166.1.31.7.1.5.1 | RowapexGbeConfigInputDataTsEntry | not-accessible | current | GBE Input Data Stream Table Entry. |
| 1.3.6.1.4.1.1166.1.31.7.1.5.1.1 | ColumnapexGbeConfigInputDataTsIndex | not-accessible | current | Index of GBE Input Data Stream Table. |
| 1.3.6.1.4.1.1166.1.31.7.1.5.1.2 | ColumnapexGbeConfigInputDataTsEnable | read-write | current | Indicates whether this GBE Input Data Stream entry is enabled or disabled. |
| 1.3.6.1.4.1.1166.1.31.7.1.5.1.3 | ColumnapexGbeConfigInputDataTsInterface | read-write | current | Number of the input interface (Port number). Range: '0' = Not Applicable GBE = 1-4 |
| 1.3.6.1.4.1.1166.1.31.7.1.5.1.4 | ColumnapexGbeConfigInputDataTsUdp | read-write | current | GBE Input UDP Port. Range: 0-65535 |
| 1.3.6.1.4.1.1166.1.31.7.1.5.1.5 | ColumnapexGbeConfigInputDataTsMulticastIp | read-write | current | The Multicast receive IP address. An IP address of 0.0.0.0 indicates singlecast only. Multicast IP addresses 224.0.0.0 to 224.0.0.255 are reserved. |
| 1.3.6.1.4.1.1166.1.31.7.1.5.1.6 | ColumnapexGbeConfigInputDataTsSourceIp | read-write | current | This is the IP address of the source device. This field is only used when a multicast IP address is also specified. |
| 1.3.6.1.4.1.1166.1.31.7.1.5.1.7 | ColumnapexGbeConfigInputDataTsMaxRate | read-write | current | The maximum data rate in Kbps for the data stream. A value of zero (0) is the default and the data stream is not rate limited. The maximum data rate limit may … |
| 1.3.6.1.4.1.1166.1.31.7.1.6 | TableapexGbeConfigInputDataTsApplyTable | not-accessible | current | Table of Apply Change for the GBE Input Data Stream Table. A row in this table corresponds to the same row index in the GBE Input Data Stream table (apexGbeCon… |
| 1.3.6.1.4.1.1166.1.31.7.1.6.1 | RowapexGbeConfigInputDataTsApplyEntry | not-accessible | current | GBE Input Data Stream Apply Table Entry. |
| 1.3.6.1.4.1.1166.1.31.7.1.6.1.1 | ColumnapexGbeConfigInputDataTsApplyIndex | not-accessible | current | The index of the GBE Input Data Stream Apply Table. |
| 1.3.6.1.4.1.1166.1.31.7.1.6.1.2 | ColumnapexGbeConfigInputDataTsApplyChange | read-write | current | The Apply for the row of data in the GBE Input Data Stream Table. A row in this table corresponds to the same row index in the GBE Input Data Stream table. Thi… |
| 1.3.6.1.4.1.1166.1.31.7.1.7 | NodeapexGbeConfigInterfaceRedundancy | |||
| 1.3.6.1.4.1.1166.1.31.7.1.7.1 | NodeapexGbeConfigInterfaceRedundancyGeneral | |||
| 1.3.6.1.4.1.1166.1.31.7.1.7.1.1 | ScalarapexGbeConfIfRedundAutoSwitchBackEnable | read-write | current | Enables the ability for the secondary interface to switch back when link is re-detected on the primary interface. Auto switch back to the primary interface wil… |
| 1.3.6.1.4.1.1166.1.31.7.1.7.1.2 | ScalarapexGbeConfIfRedundAutoSwitchBackPeriod | read-write | current | Timer for determining that the primary interface is OK for auto- switchback. The primary interface must have link for the configured amount of time. Valid time… |
| 1.3.6.1.4.1.1166.1.31.7.1.7.2 | TableapexGbeConfigInterfaceRedundancyTable | not-accessible | current | This is a table of configuration parameters for GbE Interface Redundancy. |
| 1.3.6.1.4.1.1166.1.31.7.1.7.2.1 | RowapexGbeConfigInterfaceRedundancyEntry | not-accessible | current | GbE Interface Redundancy Configuration Table Entry. |
| 1.3.6.1.4.1.1166.1.31.7.1.7.2.1.1 | ColumnapexGbeConfIfRedundIndex | not-accessible | current | GbE Interface Pair number. Value of 1 is GbE1 and GbE2 pair. Value of 2 is GbE3 and GbE4 pair. |
| 1.3.6.1.4.1.1166.1.31.7.1.7.2.1.2 | ColumnapexGbeConfIfRedundEnable | read-write | current | Enables GbE Interface Redundancy for ports pair. Failover is based on link status. If the primary GbE fails, the secondary GbE will become active and will star… |
| 1.3.6.1.4.1.1166.1.31.7.1.7.2.1.3 | ColumnapexGbeConfIfRedundForceFailover | read-write | current | When set to failover(2), this results in the APEX switching to the interface that is currently not in use. If the primary GbE is in use and this is set to fail… |
| 1.3.6.1.4.1.1166.1.31.7.1.7.2.1.4 | ColumnapexGbeConfIfRedundSuspendFailover | read-write | current | Enables and disables suspending of Interface failover. Prevents failovers to or from backup. Force failover (apexGbeConfIfRedundForceFailover) overrides this s… |
| 1.3.6.1.4.1.1166.1.31.7.1.7.3 | TableapexGbeConfigInterfaceRedundancyApplyTable | not-accessible | current | Table of Apply Change for the GBE Interface Redundancy Configuration Table. A row in this table corresponds to the same row index in the GBE Config Interface R… |
| 1.3.6.1.4.1.1166.1.31.7.1.7.3.1 | RowapexGbeConfigInterfaceRedundancyApplyEntry | not-accessible | current | GBE Config Interface Redundancy Table Entry. |
| 1.3.6.1.4.1.1166.1.31.7.1.7.3.1.1 | ColumnapexGbeConfIfRedundApplyIndex | not-accessible | current | The index of the GBE Config Interface Redundancy Table. |
| 1.3.6.1.4.1.1166.1.31.7.1.7.3.1.2 | ColumnapexGbeConfIfRedundApplyChange | read-write | current | The Apply for the row of data in the GBE Config Interface Redundancy Table. A row in this table corresponds to the same row index in the GBE Config Interface R… |
| 1.3.6.1.4.1.1166.1.31.7.2 | NodeapexGbeStatus | |||
| 1.3.6.1.4.1.1166.1.31.7.2.1 | NodeapexGbeStatusGeneral | |||
| 1.3.6.1.4.1.1166.1.31.7.2.1.1 | ScalarapexGbeBootCodeVersion | read-only | current | APEX Gigabit Ethernet Processor Boot Code Version. |
| 1.3.6.1.4.1.1166.1.31.7.2.1.2 | ScalarapexGbeApplicationCodeVersion | read-only | current | APEX Gigabit Ethernet Processor Application Code Version. |
| 1.3.6.1.4.1.1166.1.31.7.2.1.3 | ScalarapexGbeMaxInputTs | read-only | current | Maximum number of Gigabit Ethernet input transport streams that can be opened on this APEX. This is the maximum across all installed GigE interfaces. One GigE … |
| 1.3.6.1.4.1.1166.1.31.7.2.1.4 | ScalarapexGbeRoutedPacketUpdateInterval | read-only | current | Time in seconds between Gigabit Ethernet Routed Packet Count updates. The count during this time is defined as one sample. This time applies to packet counts c… |
| 1.3.6.1.4.1.1166.1.31.7.2.2 | TableapexGbeStatusTable | not-accessible | current | This is a table of status parameters for the Gigabit Ethernet Interface. |
| 1.3.6.1.4.1.1166.1.31.7.2.2.1 | RowapexGbeStatusEntry | not-accessible | current | Gigabit Ethernet Interface Status Table Entry. |
| 1.3.6.1.4.1.1166.1.31.7.2.2.1.1 | ColumnapexGbeStatusGbeInterfaceNum | not-accessible | current | Gigabit Ethernet Interface Number. |
| 1.3.6.1.4.1.1166.1.31.7.2.2.1.2 | ColumnapexGbeStatusMacAddr | read-only | current | This is the MAC address of the Gigabit Ethernet Interface. It is set at the factory and cannot be changed. The string length is 17 characters in the format 'hh… |
| 1.3.6.1.4.1.1166.1.31.7.2.2.1.3 | ColumnapexGbeStatusLinkActive | read-only | current | This indicates if the Gigabit Ethernet optical link is active. |
| 1.3.6.1.4.1.1166.1.31.7.2.2.1.4 | ColumnapexGbeStatusIgmpVersion | read-only | current | This indicates the IGMP Version being used on this interface. |
| 1.3.6.1.4.1.1166.1.31.7.2.2.1.5 | ColumnapexGbeStatusLossOfPhysicalInput | read-only | current | The current severity of apexAlarmGbeLossOfPhysicalInput for this interface. |
| 1.3.6.1.4.1.1166.1.31.7.2.3 | TableapexGbeInputTsAssignedTable | not-accessible | current | Table of Gigabit Ethernet Input TS Assigned data. |
| 1.3.6.1.4.1.1166.1.31.7.2.3.1 | RowapexGbeInputTsAssignedEntry | not-accessible | current | Gigabit Ethernet Interface Input TS Assigned Table Entry. |
| 1.3.6.1.4.1.1166.1.31.7.2.3.1.1 | ColumnapexGbeInputTsAssignedGbeInterfaceNum | not-accessible | current | The index of the Gigabit Ethernet Input TS Assigned Table. Represents the Gigabit Ethernet interface number. |
| 1.3.6.1.4.1.1166.1.31.7.2.3.1.2 | ColumnapexGbeInputTsAssignedCount | read-only | current | Number of input transport streams assigned to the GigE interface. |
| 1.3.6.1.4.1.1166.1.31.7.2.4 | TableapexGbeOpenInputUdpPortTable | not-accessible | current | Table of Gigabit Ethernet Input Open UDP Port data. |
| 1.3.6.1.4.1.1166.1.31.7.2.4.1 | RowapexGbeOpenInputUdpPortEntry | not-accessible | current | Gigabit Ethernet Interface Input Open UDP Port Table Entry. |
| 1.3.6.1.4.1.1166.1.31.7.2.4.1.1 | ColumnapexGbeOpenInputUdpPortGbeInterfaceNum | not-accessible | current | The index of the Gigabit Ethernet Input Open UDP Port Table. Represents the Gigabit Ethernet interface number. |
| 1.3.6.1.4.1.1166.1.31.7.2.4.1.2 | ColumnapexGbeOpenInputUdpPortCount | read-only | current | Number of open Input UDP Ports on the GigE interface. |
| 1.3.6.1.4.1.1166.1.31.7.2.5 | TableapexGbeStatusRoutedPacketTable | not-accessible | current | This table contains Gigabit Ethernet MPEG packet counts for each Output Transport Stream of this APEX. Update interval is apexGbeRoutedPacketUpdateInterval. |
| 1.3.6.1.4.1.1166.1.31.7.2.5.1 | RowapexGbeStatusRoutedPacketEntry | not-accessible | current | Gigabit Ethernet Interface Status Routed Packet Table Entry. |
| 1.3.6.1.4.1.1166.1.31.7.2.5.1.1 | ColumnapexGbeStatusRoutedPacketOutputTsNum | not-accessible | current | The index of the Gigabit Ethernet Routed Packet Status Table. Represents Output Transport Stream number. |
| 1.3.6.1.4.1.1166.1.31.7.2.5.1.2 | ColumnapexGbeStatusTotRoutedPackets | read-only | current | Total number of Gigabit Ethernet MPEG packets routed to this Output Transport Stream. |
| 1.3.6.1.4.1.1166.1.31.7.2.5.1.3 | ColumnapexGbeStatusNumRoutedPackets | read-only | current | Number of Gigabit Ethernet MPEG packets routed to this Output Transport Stream during the last monitoring period (apexGbeRoutedPacketUpdateInterval). |
| 1.3.6.1.4.1.1166.1.31.7.2.6 | NodeapexGbeStatusFrameCounter | |||
| 1.3.6.1.4.1.1166.1.31.7.2.6.1 | NodeapexGbeStatusFrameCounterGeneral | |||
| 1.3.6.1.4.1.1166.1.31.7.2.6.1.1 | ScalarapexGbeStatusFrameCounterTableResetAll | read-write | current | Reset Ethernet Frame Counter Totals for all GigE interfaces: - apexGbeTotalRxSinglecastFrames - apexGbeTotalRxMulticastFrames - apexGbeTotalRxBroadcastFrames -… |
| 1.3.6.1.4.1.1166.1.31.7.2.6.1.2 | ScalarapexGbeFrameCounterUpdateInterval | read-only | current | Time in seconds between Gigabit Ethernet Frame Counter updates. The count during this time is defined as one sample. This time applies to packet counts contain… |
| 1.3.6.1.4.1.1166.1.31.7.2.6.2 | TableapexGbeStatusFrameCounterTable | not-accessible | current | Table of Gigabit Ethernet Frame Counter Statistics. |
| 1.3.6.1.4.1.1166.1.31.7.2.6.2.1 | RowapexGbeStatusFrameCounterEntry | not-accessible | current | Gigabit Ethernet Interface Frame Counter Table Entry. |
| 1.3.6.1.4.1.1166.1.31.7.2.6.2.1.1 | ColumnapexGbeFrameCounterGbeInterfaceNum | not-accessible | current | The index of the Gigabit Ethernet Frame Counter Table. Represents the Gigabit Ethernet interface number. |
| 1.3.6.1.4.1.1166.1.31.7.2.6.2.1.2 | ColumnapexGbeFrameCounterReset | read-write | current | Reset Ethernet Frame Counter Statistics totals for a single GigE interface: - apexGbeTotalRxSinglecastFrames - apexGbeTotalRxMulticastFrames - apexGbeTotalRxBr… |
| 1.3.6.1.4.1.1166.1.31.7.2.6.2.1.3 | ColumnapexGbeTotalRxSinglecastFrames | read-only | current | Total number of singlecast Ethernet frames received since last reset. Reset using apexGbeStatusFrameCounterTableResetAll or apexGbeFrameCounterReset. |
| 1.3.6.1.4.1.1166.1.31.7.2.6.2.1.4 | ColumnapexGbeTotalRxMulticastFrames | read-only | current | Total number of multicast Ethernet frames received since last reset. Reset using apexGbeStatusFrameCounterTableResetAll or apexGbeFrameCounterReset. |
| 1.3.6.1.4.1.1166.1.31.7.2.6.2.1.5 | ColumnapexGbeTotalRxBroadcastFrames | read-only | current | Total number of broadcast Ethernet frames received since last reset. Reset using apexGbeStatusFrameCounterTableResetAll or apexGbeFrameCounterReset. |
| 1.3.6.1.4.1.1166.1.31.7.2.6.2.1.6 | ColumnapexGbeTotalRxErrorFrames | read-only | current | Total number of bad Ethernet frames received since last reset. Reset using apexGbeStatusFrameCounterTableResetAll or apexGbeFrameCounterReset. |
| 1.3.6.1.4.1.1166.1.31.7.2.6.2.1.7 | ColumnapexGbeTotalRxFrames | read-only | current | Total number of Ethernet frames received since last reset. This is the sum of apexGbeTotalRxSinglecastFrames, apexGbeTotalRxMulticastFrames, apexGbeTotalRxBroa… |
| 1.3.6.1.4.1.1166.1.31.7.2.6.2.1.8 | ColumnapexGbeRxSinglecastFrames | read-only | current | Number of singlecast Ethernet frames received during last status checking interval. Status checking interval is apexGbeFrameCounterUpdateInterval. |
| 1.3.6.1.4.1.1166.1.31.7.2.6.2.1.9 | ColumnapexGbeRxMulticastFrames | read-only | current | Number of multicast Ethernet frames received during last status checking interval. Status checking interval is apexGbeFrameCounterUpdateInterval. |
| 1.3.6.1.4.1.1166.1.31.7.2.6.2.1.10 | ColumnapexGbeRxBroadcastFrames | read-only | current | Number of broadcast Ethernet frames received during last status checking interval. Status checking interval is apexGbeFrameCounterUpdateInterval. |
| 1.3.6.1.4.1.1166.1.31.7.2.6.2.1.11 | ColumnapexGbeRxErrorFrames | read-only | current | Number of bad Ethernet frames received during last status checking interval. Status checking interval is apexGbeFrameCounterUpdateInterval. |
| 1.3.6.1.4.1.1166.1.31.7.2.6.2.1.12 | ColumnapexGbeRxFrames | read-only | current | Number of Ethernet frames received during last status checking interval. This is the sum of apexGbeRxSinglecastFrames, apexGbeRxMulticastFrames, apexGbeRxBroad… |
| 1.3.6.1.4.1.1166.1.31.7.2.6.2.1.13 | ColumnapexGbeTotalTxGoodFrames | read-only | current | Total number of good Ethernet frames (singlecast, multicast, and broadcast) transmitted since last reset. Reset using apexGbeStatusFrameCounterTableResetAll or… |
| 1.3.6.1.4.1.1166.1.31.7.2.6.2.1.14 | ColumnapexGbeTotalTxErrorFrames | read-only | current | Total number of bad Ethernet frames transmitted since last reset. Reset using apexGbeStatusFrameCounterTableResetAll or apexGbeFrameCounterReset. |
| 1.3.6.1.4.1.1166.1.31.7.2.6.2.1.15 | ColumnapexGbeTxGoodFrames | read-only | current | Number of good Ethernet frames (singlecast, multicast, and broadcast) transmitted during last status checking interval. Status checking interval is five second… |
| 1.3.6.1.4.1.1166.1.31.7.2.6.2.1.16 | ColumnapexGbeTxErrorFrames | read-only | current | Number of bad Ethernet frames transmitted during last status checking interval. Status checking interval is five seconds. |
| 1.3.6.1.4.1.1166.1.31.7.2.6.2.1.17 | ColumnapexGbeRxDocsisFrames | read-only | current | Number of good Ethernet frames containing DOCSIS (singlecast, multicast, and broadcast) received during last status checking interval. Status checking interval… |
| 1.3.6.1.4.1.1166.1.31.7.2.6.2.1.18 | ColumnapexGbeTotalRxDocsisFrames | read-only | current | Total number of good Ethernet frames containing DOCSIS(singlecast, multicast, and broadcast) received since last reset. Reset using apexGbeStatusFrameCounterTa… |
| 1.3.6.1.4.1.1166.1.31.7.2.6.2.1.19 | ColumnapexGbeRxMpegDocsisFrames | read-only | current | Number of MPEG packets generated from DOCSIS data (singlecast, multicast, and broadcast) received during last status checking interval. Status checking interva… |
| 1.3.6.1.4.1.1166.1.31.7.2.6.2.1.20 | ColumnapexGbeIpFragmentedPkts | read-only | current | Number of IP fragmented packets received during last status checking interval. Status checking interval is five seconds. |
| 1.3.6.1.4.1.1166.1.31.7.2.6.2.1.21 | ColumnapexGbeTotalIpFragmentedPkts | read-only | current | Total number of IP fragmented packets received during last status checking interval. Status checking interval is five seconds. |
| 1.3.6.1.4.1.1166.1.31.7.2.7 | NodeapexGbeFrameBufferStats | |||
| 1.3.6.1.4.1.1166.1.31.7.2.7.1 | NodeapexGbeFrameBufferStatsGeneral | |||
| 1.3.6.1.4.1.1166.1.31.7.2.7.2 | TableapexGbeFrameBufferStatsTable | not-accessible | current | Table of Gigabit Ethernet Frame Buffer Statistics for each GBE processor. |
| 1.3.6.1.4.1.1166.1.31.7.2.7.2.1 | RowapexGbeFrameBufferStatsEntry | not-accessible | current | Gigabit Ethernet Frame Buffer Statistics Table Entry. |
| 1.3.6.1.4.1.1166.1.31.7.2.7.2.1.1 | ColumnapexGbeFrameBufferProcessorNum | not-accessible | current | Index of the Gigabit Ethernet Buffer Statistics Table. Gigabit Ethernet Processor Number. Proc 1 = GBE Interfaces 1 and 2 Proc 2 = GBE Interfaces 3 and 4 |
| 1.3.6.1.4.1.1166.1.31.7.2.7.2.1.2 | ColumnapexGbeFrameBufferResetLevelLimit | read-only | current | The point at which the GigE frame buffer will be reset, in milliseconds. This value is equal to (maximum buffer depth - 5). The maximum buffer depth is calcula… |
| 1.3.6.1.4.1.1166.1.31.7.2.7.2.1.3 | ColumnapexGbeFrameBufferCurrMsLevel | read-only | current | Current highest Gigabit Ethernet Frame Buffer level in milliseconds. |
| 1.3.6.1.4.1.1166.1.31.7.2.7.2.1.4 | ColumnapexGbeFrameBufferCurrPercentFull | read-only | current | Current highest Gigabit Ethernet Frame Buffer fullness as a percentage of the buffer depth available for a given aggregate rate. This percentage is calculated … |
| 1.3.6.1.4.1.1166.1.31.7.2.7.2.1.5 | ColumnapexGbeFrameBufferUnderflowLevel | read-only | current | The point at which the GigE frame buffer will underflow, in milliseconds. This value is calculated based on the sum of the number of received frames per second… |
| 1.3.6.1.4.1.1166.1.31.7.2.7.2.1.6 | ColumnapexGbeFrameBufferOverflowLevel | read-only | current | The point at which the GigE frame buffer will overflow, in milliseconds. This value is calculated based on the sum of the number of received frames per second … |
| 1.3.6.1.4.1.1166.1.31.7.2.7.2.1.7 | ColumnapexGbeFrameBufferAlarmStatus | read-only | current | The current highest severity of apexAlarmGbeBufferFullness for the GBE Processor. |
| 1.3.6.1.4.1.1166.1.31.7.2.7.3 | TableapexGbeFrameBufferHourlyTable | not-accessible | current | Table of Gigabit Ethernet Frame Buffer Statistics. There can be up to 24 entries in the table for each GBE Processor. Each entry represents one hour. The newes… |
| 1.3.6.1.4.1.1166.1.31.7.2.7.3.1 | RowapexGbeFrameBufferHourlyEntry | not-accessible | current | Gigabit Ethernet Interface Frame Buffer Table Entry. |
| 1.3.6.1.4.1.1166.1.31.7.2.7.3.1.1 | ColumnapexGbeFrameBufferHourlyProcessorNum | not-accessible | current | First index of the Gigabit Ethernet Buffer Status Table. Gigabit Ethernet Processor Number. Proc 1 = GBE Interfaces 1 and 2 Proc 2 = GBE Interfaces 3 and 4 |
| 1.3.6.1.4.1.1166.1.31.7.2.7.3.1.2 | ColumnapexGbeFrameBufferHourlyIndex | not-accessible | current | Second index of the Gigabit Ethernet Buffer Status Table. Each index represents one hour. There can be up to 24 entries in the table. The most recent entry is … |
| 1.3.6.1.4.1.1166.1.31.7.2.7.3.1.3 | ColumnapexGbeFrameBufferHourlyInInterface | read-only | current | Number of the input interface for the Gigabit Ethernet interface that experienced the highest buffer level for the hour. |
| 1.3.6.1.4.1.1166.1.31.7.2.7.3.1.4 | ColumnapexGbeFrameBufferHourlyInUdp | read-only | current | Input UDP Port for the Gigabit Ethernet interface that experienced the highest buffer level for the hour. |
| 1.3.6.1.4.1.1166.1.31.7.2.7.3.1.5 | ColumnapexGbeFrameBufferHourlyInMulticastIp | read-only | current | Input Multicast IP address for the Gigabit Ethernet interface that experienced the highest buffer level for the hour. |
| 1.3.6.1.4.1.1166.1.31.7.2.7.3.1.6 | ColumnapexGbeFrameBufferHourlyInSourceIp | read-only | current | Input IGMP v3 Source IP for the Gigabit Ethernet interface that experienced the highest buffer level for the hour. |
| 1.3.6.1.4.1.1166.1.31.7.2.7.3.1.7 | ColumnapexGbeFrameBufferHourlyMaxMsLevel | read-only | current | The maximum Gigabit Ethernet frame buffer level (in milliseconds) recorded for the hour. |
| 1.3.6.1.4.1.1166.1.31.7.2.7.3.1.8 | ColumnapexGbeFrameBufferHourlyMaxPercentFull | read-only | current | The maximum Gigabit Ethernet frame buffer level percentage recorded for the hour. |
| 1.3.6.1.4.1.1166.1.31.7.2.7.3.1.9 | ColumnapexGbeFrameBufferHourlyGpsTime | read-only | current | The GPS time when the maximum Gigabit Ethernet frame buffer level was reached. |
| 1.3.6.1.4.1.1166.1.31.7.2.7.3.1.10 | ColumnapexGbeFrameBufferHourlyOverflows | read-only | current | The number of overflows recorded on Gigabit Ethernet interface for the hour. |
| 1.3.6.1.4.1.1166.1.31.7.2.7.3.1.11 | ColumnapexGbeFrameBufferHourlyResets | read-only | current | The number of resets reported by the GigE processor during the hour. |
| 1.3.6.1.4.1.1166.1.31.7.2.8 | NodeapexGbeStatusInputTransportStream | |||
| 1.3.6.1.4.1.1166.1.31.7.2.8.1 | NodeapexGbeStatusInputTsGeneral | |||
| 1.3.6.1.4.1.1166.1.31.7.2.8.1.1 | ScalarapexGbeStatusInputTsUpdateInterval | read-only | current | Time in seconds between Gigabit Ethernet Input Transport Stream Packet Count updates. The count during this time is defined as one sample. This time applies to… |
| 1.3.6.1.4.1.1166.1.31.7.2.8.2 | TableapexGbeStatusInputTsTable | not-accessible | current | Table of Gigabit Ethernet Input Transport Stream status. A row in this table corresponds to the same index row in apexInputTsStatTable and apexGbeStatusInputTs… |
| 1.3.6.1.4.1.1166.1.31.7.2.8.2.1 | RowapexGbeStatusInputTsEntry | not-accessible | current | Gigabit Ethernet Input Transport Stream Status Table Entry. |
| 1.3.6.1.4.1.1166.1.31.7.2.8.2.1.1 | ColumnapexGbeStatInTsInputTsNum | not-accessible | current | The Gigabit Ethernet Input Transport Stream Status table index. A row in this table corresponds to the same index row in apexInputTsStatTable and apexGbeStatus… |
| 1.3.6.1.4.1.1166.1.31.7.2.8.2.1.2 | ColumnapexGbeStatInTsSamplingPeriod | read-only | current | The total time, in seconds, over which the packet counts statistics in this row have been collected. Refer to the description of apexGbeStatusInputTsTable for … |
| 1.3.6.1.4.1.1166.1.31.7.2.8.2.1.3 | ColumnapexGbeStatInTsPriCurDataCount | read-only | current | The Data Packet Count of the most recent sample for the primary. Refer to the description of apexGbeStatusInputTsTable for an explanation of packet counting. R… |
| 1.3.6.1.4.1.1166.1.31.7.2.8.2.1.4 | ColumnapexGbeStatInTsPriAvgDataCount | read-only | current | The Average Data Packet Count per sample during apexGbeStatInTsSamplingPeriod for the primary. Refer to the description of apexGbeStatusInputTsTable for an exp… |
| 1.3.6.1.4.1.1166.1.31.7.2.8.2.1.5 | ColumnapexGbeStatInTsPriMinDataCount | read-only | current | The Minimum Data Packet Count sample during apexGbeStatInTsSamplingPeriod for the primary. Refer to the description of apexGbeStatusInputTsTable for an explana… |
| 1.3.6.1.4.1.1166.1.31.7.2.8.2.1.6 | ColumnapexGbeStatInTsPriPeakDataCount | read-only | current | The Peak Data Packet Count sample during apexGbeStatInTsSamplingPeriod for the primary. Refer to the description of apexGbeStatusInputTsTable for an explanatio… |
| 1.3.6.1.4.1.1166.1.31.7.2.8.2.1.7 | ColumnapexGbeStatInTsPriCurStreamCount | read-only | current | The Transport Stream Packet Count of the most recent sample for the primary. Refer to the description of apexGbeStatusInputTsTable for an explanation of packet… |
| 1.3.6.1.4.1.1166.1.31.7.2.8.2.1.8 | ColumnapexGbeStatInTsPriAvgStreamCount | read-only | current | The Average Transport Stream Packet Count per sample during apexGbeStatInTsSamplingPeriod for the primary. Refer to the description of apexGbeStatusInputTsTabl… |
| 1.3.6.1.4.1.1166.1.31.7.2.8.2.1.9 | ColumnapexGbeStatInTsPriMinStreamCount | read-only | current | The Minimum Transport Stream Packet Count sample during apexGbeStatInTsSamplingPeriod for the primary. Refer to the description of apexGbeStatusInputTsTable fo… |
| 1.3.6.1.4.1.1166.1.31.7.2.8.2.1.10 | ColumnapexGbeStatInTsPriPeakStreamCount | read-only | current | The Peak Transport Stream Packet Count sample during apexGbeStatInTsSamplingPeriod for the primary. Refer to the description of apexGbeStatusInputTsTable for a… |
| 1.3.6.1.4.1.1166.1.31.7.2.8.2.1.11 | ColumnapexGbeStatInTsSecCurDataCount | read-only | current | The Data Packet Count of the most recent sample for the secondary. Refer to the description of apexGbeStatusInputTsTable for an explanation of packet counting.… |
| 1.3.6.1.4.1.1166.1.31.7.2.8.2.1.12 | ColumnapexGbeStatInTsSecAvgDataCount | read-only | current | The Average Data Packet Count per sample during apexGbeStatInTsSamplingPeriod for the secondary. Refer to the description of apexGbeStatusInputTsTable for an e… |
| 1.3.6.1.4.1.1166.1.31.7.2.8.2.1.13 | ColumnapexGbeStatInTsSecMinDataCount | read-only | current | The Minimum Data Packet Count sample during apexGbeStatInTsSamplingPeriod for the secondary. Refer to the description of apexGbeStatusInputTsTable for an expla… |
| 1.3.6.1.4.1.1166.1.31.7.2.8.2.1.14 | ColumnapexGbeStatInTsSecPeakDataCount | read-only | current | The Peak Data Packet Count sample during apexGbeStatInTsSamplingPeriod for the secondary. Refer to the description of apexGbeStatusInputTsTable for an explanat… |
| 1.3.6.1.4.1.1166.1.31.7.2.8.2.1.15 | ColumnapexGbeStatInTsSecCurStreamCount | read-only | current | The Transport Stream Packet Count of the most recent sample for the secondary. Refer to the description of apexGbeStatusInputTsTable for an explanation of pack… |
| 1.3.6.1.4.1.1166.1.31.7.2.8.2.1.16 | ColumnapexGbeStatInTsSecAvgStreamCount | read-only | current | The Average Transport Stream Packet Count per sample during apexGbeStatInTsSamplingPeriod for the secondary. Refer to the description of apexGbeStatusInputTsTa… |
| 1.3.6.1.4.1.1166.1.31.7.2.8.2.1.17 | ColumnapexGbeStatInTsSecMinStreamCount | read-only | current | The Minimum Transport Stream Packet Count sample during apexGbeStatInTsSamplingPeriod for the secondary. Refer to the description of apexGbeStatusInputTsTable … |
| 1.3.6.1.4.1.1166.1.31.7.2.8.2.1.18 | ColumnapexGbeStatInTsSecPeakStreamCount | read-only | current | The Peak Transport Stream Packet Count sample during apexGbeStatInTsSamplingPeriod for the secondary. Refer to the description of apexGbeStatusInputTsTable for… |
| 1.3.6.1.4.1.1166.1.31.7.2.8.2.1.19 | ColumnapexGbeStatInTsTotPacketDropCount | read-only | current | The total number of dropped packets for the Input Transport Stream. Clear using apexGbeStatusInputTsDropCounterClearAll. |
| 1.3.6.1.4.1.1166.1.31.7.2.8.2.1.20 | ColumnapexGbeStatInTsCurPacketDropCount | read-only | current | The number of packets dropped for the Input Transport Stream in the last five (5) seconds. |
| 1.3.6.1.4.1.1166.1.31.7.2.8.3 | TableapexGbeStatusInputTsErrorTable | not-accessible | current | Table of Gigabit Ethernet Input Transport Stream Error status. A row in this table corresponds to the same index row in apexInputTsStatTable and apexGbeStatusI… |
| 1.3.6.1.4.1.1166.1.31.7.2.8.3.1 | RowapexGbeStatusInputTsErrorEntry | not-accessible | current | Gigabit Ethernet Input Transport Stream Status Table Entry. |
| 1.3.6.1.4.1.1166.1.31.7.2.8.3.1.1 | ColumnapexGbeStatInTsErrorInputTsNum | not-accessible | current | The Gigabit Ethernet Input Transport Stream Error Status table index. A row in this table corresponds to the same index row in apexInputTsStatTable and apexGbe… |
| 1.3.6.1.4.1.1166.1.31.7.2.8.3.1.2 | ColumnapexGbeStatInTsPriErrorSummary | read-only | current | The current highest error of the following errors for the primary input transport stream: apexGbeStatInTsPriLowBitRateError apexGbeStatInTsPriHighBitRateError … |
| 1.3.6.1.4.1.1166.1.31.7.2.8.3.1.3 | ColumnapexGbeStatInTsPriLowBitRateError | read-only | current | The current low bit rate state for the primary input stream. Ok indicates no errors or not checking low bit rate. Error indicates primary input stream is below… |
| 1.3.6.1.4.1.1166.1.31.7.2.8.3.1.4 | ColumnapexGbeStatInTsPriHighBitRateError | read-only | current | The current high bit rate state for the primary input stream. Ok indicates no errors or not checking high bit rate. Error indicates primary input stream is abo… |
| 1.3.6.1.4.1.1166.1.31.7.2.8.3.1.5 | ColumnapexGbeStatInTsMptsRedundPriError | read-only | current | The current redundant threshold state for the primary input stream. Ok indicates no errors or input stream is not part of a redundant pair. Error indicates pri… |
| 1.3.6.1.4.1.1166.1.31.7.2.8.3.1.6 | ColumnapexGbeStatInTsMptsRedundFailError | read-only | current | The current fail over state for a redundancy pair. Ok indicates no errors or input stream is not part of a redundant pair. Error indicates primary input stream… |
| 1.3.6.1.4.1.1166.1.31.7.2.8.3.1.7 | ColumnapexGbeStatInTsSecErrorSummary | read-only | current | The current highest error state of the following for the secondary input transport stream: apexGbeStatInTsSecLowBitRateError apexGbeStatInTsSecHighBitRateError… |
| 1.3.6.1.4.1.1166.1.31.7.2.8.3.1.8 | ColumnapexGbeStatInTsSecLowBitRateError | read-only | current | The current low bit rate state for the secondary input stream. Ok indicates no errors or not checking low bit rate. Error indicates secondary input stream is b… |
| 1.3.6.1.4.1.1166.1.31.7.2.8.3.1.9 | ColumnapexGbeStatInTsSecHighBitRateError | read-only | current | The current high bit rate state for the secondary input stream. Ok indicates no errors or not checking high bit rate. Error indicates secondary input stream is… |
| 1.3.6.1.4.1.1166.1.31.7.2.8.3.1.10 | ColumnapexGbeStatInTsPriLossInputError | read-only | current | The current loss of input stream state for the primary input stream. Ok indicates no errors or not checking for loss of input stream. Error indicates primary i… |
| 1.3.6.1.4.1.1166.1.31.7.2.8.3.1.11 | ColumnapexGbeStatInTsSecLossInputError | read-only | current | The current loss of input stream state for the secondary input stream. Ok indicates no errors or not checking for loss of input stream. Error indicates seconda… |
| 1.3.6.1.4.1.1166.1.31.7.2.8.3.1.12 | ColumnapexGbeStatInTsPacketDropError | read-only | current | The current packet drop state for the active input stream. Ok indicates no errors or not checking for packet drops. Error indicates there are packet drops on t… |
| 1.3.6.1.4.1.1166.1.31.7.2.9 | NodeapexGbeStatusInterfaceRedund | |||
| 1.3.6.1.4.1.1166.1.31.7.2.9.1 | TableapexGbeStatusInterfaceRedundTable | not-accessible | current | This is a table of status parameters for GbE Interface Redundancy. |
| 1.3.6.1.4.1.1166.1.31.7.2.9.1.1 | RowapexGbeStatusInterfaceRedundEntry | not-accessible | current | GbE Interface Redundancy Status Table Entry. |
| 1.3.6.1.4.1.1166.1.31.7.2.9.1.1.1 | ColumnapexGbeStatusInterfaceRedundIndex | not-accessible | current | GbE Interface Pair number. Value of 1 is GbE1 and GbE2 pair. Value of 2 is GbE3 and GbE4 pair. |
| 1.3.6.1.4.1.1166.1.31.7.2.9.1.1.2 | ColumnapexGbeStatusInterfaceRedundActiveIf | read-only | current | The current active interface for the redundant pair. This is only applicable if GbE Interface Redundancy is enabled for the pair. If GbE Interface Redundancy i… |
| 1.3.6.1.4.1.1166.1.31.7.2.9.1.1.3 | ColumnapexGbeStatusInterfaceRedundInvalidApplyText | read-only | current | When apexGbeConfIfRedundApplyChange is set to applyNotInProgressInvalidData this entry may contain a text description of what was wrong with the data. This ent… |
| 1.3.6.1.4.1.1166.1.31.7.2.9.1.1.4 | ColumnapexGbeStatusInterfaceRedundFaultCondition | read-only | current | Current fault condition of the GbE Interface pair. Reflects apexAlarmGbeInterfaceRedundFailOver for this redundant pair. |
| 1.3.6.1.4.1.1166.1.31.7.2.10 | NodeapexGbeStatusInputTsDropCounter | |||
| 1.3.6.1.4.1.1166.1.31.7.2.10.1 | NodeapexGbeStatusInputTsDropCounterGeneral | |||
| 1.3.6.1.4.1.1166.1.31.7.2.10.1.1 | ScalarapexGbeStatusInputTsDropCounterClearAll | read-write | current | Clear dropped packet counts for all Input Streams: - apexGbeStatInTsTotPacketDropCount Once written, the change to this parameter will take immediate effect. @… |
| 1.3.6.1.4.1.1166.1.31.7.3 | NodeapexGbeSfp | |||
| 1.3.6.1.4.1.1166.1.31.7.3.1 | NodeapexGbeSfpConfig | |||
| 1.3.6.1.4.1.1166.1.31.7.3.1.1 | NodeapexGbeSfpConfigGeneral | |||
| 1.3.6.1.4.1.1166.1.31.7.3.1.1.1 | ScalarapexGbeSfpUpdateStatus | read-write | current | When set to 'update' the APEX will update the apexGbeSfpStatusTable by performing an one-time read of SFP memory. APEX sets back to 'updateNotInProgress' when … |
| 1.3.6.1.4.1.1166.1.31.7.3.2 | NodeapexGbeSfpStatus | |||
| 1.3.6.1.4.1.1166.1.31.7.3.2.1 | NodeapexGbeSfpStatusGeneral | |||
| 1.3.6.1.4.1.1166.1.31.7.3.2.2 | TableapexGbeSfpStatusTable | not-accessible | current | Table of SFP status parameters. Indexed by Gigabit Ethernet Interface Number. |
| 1.3.6.1.4.1.1166.1.31.7.3.2.2.1 | RowapexGbeSfpStatusEntry | not-accessible | current | SFP status table entry. |
| 1.3.6.1.4.1.1166.1.31.7.3.2.2.1.1 | ColumnapexGbeSfpStatusGbeIfNum | not-accessible | current | Gigabit Ethernet Interface Number. |
| 1.3.6.1.4.1.1166.1.31.7.3.2.2.1.2 | ColumnapexGbeSfpStatusVendorId | read-only | current | ASCII format of bytes 0-127 from SFP-MSA ID Memory Map address A0h. Zero-length indicates that no SFP module is installed. |
| 1.3.6.1.4.1.1166.1.31.7.3.2.2.1.3 | ColumnapexGbeSfpStatusDiagInfo | read-only | current | ASCII format of bytes 96-127 from SFP Diagnostic Memory address A2h. Zero-length indicates that diagnostic information is not available. |
| 1.3.6.1.4.1.1166.1.31.8 | NodeapexQam | |||
| 1.3.6.1.4.1.1166.1.31.8.1 | NodeapexQamConfig | |||
| 1.3.6.1.4.1.1166.1.31.8.1.1 | NodeapexQamConfigGeneral | |||
| 1.3.6.1.4.1.1166.1.31.8.1.1.1 | ScalarapexQamConfigTransmissionMode | read-write | current | This is the QAM Transmission Mode as defined in: Series J: Transmission of Television, Sound Programme and other Multimedia Signals, ITU-T J.83. Once written, … |
| 1.3.6.1.4.1.1166.1.31.8.1.2 | NodeapexQamModuleUpgrade | |||
| 1.3.6.1.4.1.1166.1.31.8.1.2.1 | ScalarapexQamModuleUpgradeSlot | read-write | current | This is the QAM slot number of the QAM Module that is being upgraded from a 2x4 channel module to a 2x8 channel module. Zero indicates no slot selected. Once w… |
| 1.3.6.1.4.1.1166.1.31.8.1.2.2 | ScalarapexQamModuleUpgradeCode | read-write | current | This is the encrypted upgrade code for the QAM Module that is being upgraded from a 2x4 channel module to a 2x8 channel module. The Upgrade Code is specific to… |
| 1.3.6.1.4.1.1166.1.31.8.1.2.3 | ScalarapexQamModuleUpgradeApplyChange | read-write | current | This is the Apply for QAM Module Upgrade Slot and Code. This parameter MUST be set to 'apply' in order for apexQamModuleUpgradeSlot and apexQamModuleUpgradeCod… |
| 1.3.6.1.4.1.1166.1.31.8.1.3 | TableapexQamConfigApplyTable | not-accessible | current | Table of Apply Change for the data for apexQamRfConfigTable. |
| 1.3.6.1.4.1.1166.1.31.8.1.3.1 | RowapexQamConfigApplyEntry | not-accessible | current | QAM Configuration Apply Table Entry. |
| 1.3.6.1.4.1.1166.1.31.8.1.3.1.1 | ColumnapexQamConfigApplyRfPortNum | not-accessible | current | The QAM RF Port number. Port 1,2,7,8 is Slot 1 Port 3,4,9,10 is Slot 2 Port 5,6,11,12 is Slot 3 |
| 1.3.6.1.4.1.1166.1.31.8.1.3.1.2 | ColumnapexQamConfigApplyChange | read-write | current | The Apply for a row of data in apexQamRfConfigTable. A row in this table corresponds to the same row index in the apexQamRfConfigTable. This parameter MUST be … |
| 1.3.6.1.4.1.1166.1.31.8.1.4 | TableapexQamRfConfigTable | not-accessible | current | Table of configuration items configurable on a QAM RF Port basis. There can be up to 12 RF Ports on an APEX1000 depending on how the 3 QAM slots are populated.… |
| 1.3.6.1.4.1.1166.1.31.8.1.4.1 | RowapexQamRfConfigEntry | not-accessible | current | QAM RF Port Configuration Table Entry. |
| 1.3.6.1.4.1.1166.1.31.8.1.4.1.1 | ColumnapexQamRfConfigRfPortNum | not-accessible | current | The QAM RF Port number. |
| 1.3.6.1.4.1.1166.1.31.8.1.4.1.2 | ColumnapexQamRfConfigNumChannelsEnabled | read-write | current | The number of QAM Channels enabled on the RF Port. APEX will not allow enabling of more channels than the installed QAM Module will support. Note that when thi… |
| 1.3.6.1.4.1.1166.1.31.8.1.4.1.3 | ColumnapexQamRfConfigModulationMode | read-write | current | The QAM Modulation mode for the QAM RF Port. This is the QAM Modulation mode of all QAM Channels enabled on the RF Port. For 4x4 QAM Modules: This parameter ap… |
| 1.3.6.1.4.1.1166.1.31.8.1.4.1.4 | ColumnapexQamRfConfigSymbolRate | read-write | current | The Symbol Rate Setting of the QAM Channels enabled on the RF Port. It is in symbols per second (sps). When QAM Transmission Mode is 'annexA-DVB' the range is … |
| 1.3.6.1.4.1.1166.1.31.8.1.4.1.5 | ColumnapexQamRfConfigSpectrumInvert | read-write | current | The Spectrum Inversion Setting of the QAM Channels enabled on the RF Port. |
| 1.3.6.1.4.1.1166.1.31.8.1.4.1.6 | ColumnapexQamRfConfigTuningMode | read-write | current | The tuning mode of the QAM Channels enabled on the RF Port. 'frequency' - The APEX tunes based on frequency as configured in RF Center Frequency for QAM Channe… |
| 1.3.6.1.4.1.1166.1.31.8.1.4.1.7 | ColumnapexQamRfConfigEiaFrequencyPlan | read-write | current | This is the frequency plan to use for tuning of the QAM Channels enabled on the RF Port. Frequency plans are as per CEA Standard: Cable Television Channel Iden… |
| 1.3.6.1.4.1.1166.1.31.8.1.4.1.8 | ColumnapexQamRfConfigEiaChanNumChannelA | read-write | current | The Channel Number for QAM Channel A. Range is 0 to 158, with valid channels being 1 to 158 and 0 indicating 'not applicable'. This parameter is valid only whe… |
| 1.3.6.1.4.1.1166.1.31.8.1.4.1.9 | ColumnapexQamRfConfigRfCenterFreqChannelA | read-write | current | The RF Center Frequency for QAM Channel A. When QAM Transmission Mode is 'annexA-DVB' the range is 85,000,000 Hz to 999,000,000 Hz in 250,000 Hz steps. For 2x4… |
| 1.3.6.1.4.1.1166.1.31.8.1.4.1.10 | ColumnapexQamRfConfigRfChanSpacing | read-write | current | The Channel spacing for the QAM Channels enabled on the RF Port. This value must be in Hz in the range 1,000,000 Hz to 8,000,000 Hz in 500,000 Hz steps. The AP… |
| 1.3.6.1.4.1.1166.1.31.8.1.4.1.11 | ColumnapexQamRfConfigRfLevelAttenuation | read-write | current | The RF level attenuation setting of each enabled channel on the RF Port. Range is -300 to 800 representing -3 to 8 dB attenuation in 0.01 dB steps. (See 'Note'… |
| 1.3.6.1.4.1.1166.1.31.8.1.4.1.12 | ColumnapexQamRfConfigRfLevelLowThreshold | read-write | current | The threshold delta relative to the configured RF level that will indicate an RF Low condition. The measured output must drop this amount for RF Low condition.… |
| 1.3.6.1.4.1.1166.1.31.8.1.4.1.13 | ColumnapexQamRfConfigRfLevelHighThreshold | read-write | current | The threshold delta relative to the configured RF level that will indicate an RF High condition. The measured output must rise this amount for RF High conditio… |
| 1.3.6.1.4.1.1166.1.31.8.1.4.1.14 | ColumnapexQamRfConfigMute | read-write | current | Mute the RF Port. This will mute all QAM channels enabled on the RF Port. |
| 1.3.6.1.4.1.1166.1.31.8.1.4.1.15 | ColumnapexQamRfConfigInterleaverDepth1 | read-write | current | The first of two Interleaver settings that can be assigned to the QAM Channels of this RF Port. Configurable only for Transmission Mode 'annexB-ATSC-DCII'. Val… |
| 1.3.6.1.4.1.1166.1.31.8.1.4.1.16 | ColumnapexQamRfConfigInterleaverDepth2 | read-write | current | The second of two Interleaver settings that can be assigned to the QAM Channels of this RF Port. Configurable only for Transmission Mode 'annexB-ATSC-DCII'. Va… |
| 1.3.6.1.4.1.1166.1.31.8.1.5 | TableapexQamChannelConfigTable | not-accessible | current | Table of configuration items configurable on a QAM Channel basis. There are 48 Output Transport Streams (OTS) on an APEX1000. There can be up to 48 QAM Channel… |
| 1.3.6.1.4.1.1166.1.31.8.1.5.1 | RowapexQamChannelConfigEntry | not-accessible | current | QAM Channel Configuration Table Entry. |
| 1.3.6.1.4.1.1166.1.31.8.1.5.1.1 | ColumnapexQamChanConfigChannelNum | not-accessible | current | The QAM RF Port number. |
| 1.3.6.1.4.1.1166.1.31.8.1.5.1.2 | ColumnapexQamChanConfigInterleaverSelect | read-write | current | The interleaver selection for this Channel. Will use either apexQamRfConfigInterleaverDepth1 or apexQamRfConfigInterleaverDepth2. |
| 1.3.6.1.4.1.1166.1.31.8.1.5.1.3 | ColumnapexQamChanConfigTestMode | read-write | current | Test mode setting for the QAM Channel. Setting to other than 'off' will cause a service interruption. |
| 1.3.6.1.4.1.1166.1.31.8.1.6 | NodeapexQamRfRedundancyConfig | |||
| 1.3.6.1.4.1.1166.1.31.8.1.6.1 | NodeapexQamRfRedundancyConfigGeneral | |||
| 1.3.6.1.4.1.1166.1.31.8.1.6.1.1 | ScalarapexQamRfRedundConfigApplyChange | read-write | current | The Apply for QAM RF Redundancy Configuration parameters. This parameter MUST be set to 'apply' in order for the data to take effect. This parameter MUST be se… |
| 1.3.6.1.4.1.1166.1.31.8.1.6.1.2 | ScalarapexQamRfRedundConfigEnable | read-write | current | Enables RF redundancy mode, allowing the APEX to failover to backup RF port and communicate with the REM1000. Allows for failover/ switching without requiring … |
| 1.3.6.1.4.1.1166.1.31.8.1.6.1.3 | ScalarapexQamRfRedundConfigRemConnection | read-write | current | Configures how the APEX is connected to the REM1000. 'none' - Not connecting to REM1000. 'direct' - Connected to REM1000 dedicated IP interface through APEX Da… |
| 1.3.6.1.4.1.1166.1.31.8.1.6.1.4 | ScalarapexQamRfRedundConfigApexId | read-write | current | Identifies which set of RF inputs on the REM1000 are associated with this APEX. Once written, the change to this parameter will only take immediate effect afte… |
| 1.3.6.1.4.1.1166.1.31.8.1.6.1.5 | ScalarapexQamRfRedundConfigRemCommonIpAddr | read-write | current | Target REM1000 IP address. Must be singlecast address. Only used when apexQamRfRedundConfigRemConnection is set to 'common'. Once written, the change to this p… |
| 1.3.6.1.4.1.1166.1.31.8.1.6.1.6 | ScalarapexQamRfRedundConfigAutoSwitchBack | read-write | current | This is the enable/disable of automatic switch back to the previous RF port from backup for QAM RF redundancy. When 'enabled', switch back to the previous RF p… |
| 1.3.6.1.4.1.1166.1.31.8.1.6.1.7 | ScalarapexQamRfRedundConfigSuspendFailover | read-write | current | Enables and disables suspending of RF failover. Prevents failovers to or from backup. Force failover (apexQamRfRedundConfigForceSwitch) overrides this setting.… |
| 1.3.6.1.4.1.1166.1.31.8.1.6.1.8 | ScalarapexQamRfRedundConfigForceSwitch | read-write | current | Force a switch of an RF Port to or from the backup. Selects which RF Port to switch from. Overrides Suspend Failover (apexQamRfRedundConfigSuspendFailover). Pa… |
| 1.3.6.1.4.1.1166.1.31.8.1.6.1.9 | ScalarapexQamRfRedundConfigRemDirectIpOctet1 | read-write | current | Target REM1000 IP address first octet. Only used when apexQamRfRedundConfigRemConnection is set to 'direct'. The remainder of the IP address will be filled in … |
| 1.3.6.1.4.1.1166.1.31.8.1.7 | TableapexQamChannelConfigApplyTable | not-accessible | current | Table of Apply Change for the data for apexQamChannelConfigTable. |
| 1.3.6.1.4.1.1166.1.31.8.1.7.1 | RowapexQamChannelConfigApplyEntry | not-accessible | current | QAM Channel Configuration Apply Table Entry. |
| 1.3.6.1.4.1.1166.1.31.8.1.7.1.1 | ColumnapexQamChannelConfigApplyChannelNum | not-accessible | current | The QAM Channel number. |
| 1.3.6.1.4.1.1166.1.31.8.1.7.1.2 | ColumnapexQamChannelConfigApplyChange | read-write | current | The Apply for a row of data in apexQamChannelConfigTable. A row in this table corresponds to the same row index in the apexQamChannelConfigTable. This paramete… |
| 1.3.6.1.4.1.1166.1.31.8.2 | NodeapexQamStatus | |||
| 1.3.6.1.4.1.1166.1.31.8.2.1 | NodeapexQamStatusGeneral | |||
| 1.3.6.1.4.1.1166.1.31.8.2.1.1 | ScalarapexQamStatusTransmissionMode | read-only | current | This is the QAM Transmission Mode that is currently in use. QAM Transmission Mode is defined in: Series J: Transmission of Television, Sound Programme and othe… |
| 1.3.6.1.4.1.1166.1.31.8.2.1.2 | ScalarapexQamModuleInstalledCount | read-only | current | Number of hot swappable QAM Modules currently installed. |
| 1.3.6.1.4.1.1166.1.31.8.2.1.3 | ScalarapexFanModuleInstalledCount | read-only | current | Number of Fan-Only Modules currently installed in QAM Module slots. |
| 1.3.6.1.4.1.1166.1.31.8.2.1.4 | ScalarapexQamChannelsActiveCount | read-only | current | Number of QAM Channels that are present (QAM Module installed) and enabled for use. |
| 1.3.6.1.4.1.1166.1.31.8.2.2 | TableapexQamModuleStatusTable | not-accessible | current | Table of QAM Module Status. Refer to the descriptions of apexQamRfConfigTable and apexQamChannelConfigTable for information on QAM slot, RF Port mapping, and Q… |
| 1.3.6.1.4.1.1166.1.31.8.2.2.1 | RowapexQamModuleStatusEntry | not-accessible | current | QAM Module Status Table Entry. |
| 1.3.6.1.4.1.1166.1.31.8.2.2.1.1 | ColumnapexQamModuleStatQamModuleNum | not-accessible | current | QAM Module slot number. |
| 1.3.6.1.4.1.1166.1.31.8.2.2.1.2 | ColumnapexQamModuleStatInstalled | read-only | current | Indicates if a module is installed and what type. notApplicable - When APEX does not boot properly. notInstalled - No QAM or Fan Module detected in slot. Repor… |
| 1.3.6.1.4.1.1166.1.31.8.2.2.1.3 | ColumnapexQamModuleStatFanSpeed | read-only | current | The fan speed in RPM for installed QAM or Fan Module. Zero if not installed. |
| 1.3.6.1.4.1.1166.1.31.8.2.2.1.4 | ColumnapexQamModuleStatFanFault | read-only | current | Fan Fault. This fault is reported in apexAlarmFanFault not apexAlarmQamModuleFault. |
| 1.3.6.1.4.1.1166.1.31.8.2.2.1.5 | ColumnapexQamModuleStatTemperature | read-only | current | Temperature at sensor near the fan of the QAM Module or Fan Module in degrees Celsius. |
| 1.3.6.1.4.1.1166.1.31.8.2.2.1.6 | ColumnapexQamModuleStatTemperatureFault | read-only | current | Temperature fault. This fault is reported in apexAlarmTemperatureFault not apexAlarmQamModuleFault. |
| 1.3.6.1.4.1.1166.1.31.8.2.2.1.7 | ColumnapexQamModuleStatError | read-only | current | Summary of errors reported on an QAM Module basis. These errors are reported in apexAlarmQamModuleFault. ok - No errors. removed - Reflects apexQamModuleStatIn… |
| 1.3.6.1.4.1.1166.1.31.8.2.2.1.8 | ColumnapexQamModuleStatFaultCondition | read-only | current | Current fault condition of the QAM Module errors. Reflects apexAlarmQamModuleFault for this QAM Module. |
| 1.3.6.1.4.1.1166.1.31.8.2.2.1.9 | ColumnapexQamModuleStatFaultSumm | read-only | current | Roll-up of QAM RF Port and QAM Channel fault conditions for this QAM Module. |
| 1.3.6.1.4.1.1166.1.31.8.2.2.1.10 | ColumnapexQamModuleStatPowerFault | read-only | current | Power fault. notApplicable - No module installed. ok - Power good. lowVoltageMainboard - Low voltage detected on Mainboard side of connector. lowVoltageQamModu… |
| 1.3.6.1.4.1.1166.1.31.8.2.2.1.11 | ColumnapexQamModuleStatBoardTemperature | read-only | current | Temperature of the 4x4 QAM module board ('plate' temp) in degrees Celsius. Used only for 4x4 QAM Modules. |
| 1.3.6.1.4.1.1166.1.31.8.2.2.1.12 | ColumnapexQamModuleStatBoardTemperatureFault | read-only | current | Board temperature fault of the 4x4 QAM module board ('plate' temp). Used only for 4x4 QAM Modules. This fault is reported in apexAlarmTemperatureFault not apex… |
| 1.3.6.1.4.1.1166.1.31.8.2.2.1.13 | ColumnapexQamModuleStat5VdcSupply | read-only | current | Measured level of the +5 VDC supply input of the 4x4 QAM module board. Used only for 4x4 QAM Modules. Range is 0 to 1000 representing 0 to 10 Volts in 0.01 Vol… |
| 1.3.6.1.4.1.1166.1.31.8.2.2.1.14 | ColumnapexQamModuleStat5VdcFault | read-only | current | The +5 VDC supply fault of the 4x4 QAM module board. Used only for 4x4 QAM Modules. Indicates there is a problem with the direct 5 VDC supply or any internal m… |
| 1.3.6.1.4.1.1166.1.31.8.2.2.1.15 | ColumnapexQamModuleStat3dot3VdcSupply | read-only | current | Measured level of the +3.3 VDC supply input of the 4x4 QAM module board. Used only for 4x4 QAM Modules. Range is 0 to 1000 representing 0 to 10 Volts in 0.01 V… |
| 1.3.6.1.4.1.1166.1.31.8.2.2.1.16 | ColumnapexQamModuleStat3dot3VdcFault | read-only | current | The +3.3 VDC supply fault of the 4x4 QAM module board. Used only for 4x4 QAM Modules. Indicates there is a problem with the direct 3.3 VDC supply or any intern… |
| 1.3.6.1.4.1.1166.1.31.8.2.2.1.17 | ColumnapexQamModuleStatCommError | read-only | current | Communication with the 4x4 QAM Module has failed. Used only for 4x4 QAM Modules. |
| 1.3.6.1.4.1.1166.1.31.8.2.2.1.18 | ColumnapexQamModuleStatCodeInitError | read-only | current | Code initialization error of the 4x4 QAM Module. Used only for 4x4 QAM Modules. Indicates a code, firmware, or FPGA startup issue. The module failed to load th… |
| 1.3.6.1.4.1.1166.1.31.8.2.3 | TableapexQamModuleSerialNumTable | not-accessible | current | Table of QAM Module Serial Numbers. |
| 1.3.6.1.4.1.1166.1.31.8.2.3.1 | RowapexQamModuleSerialNumEntry | not-accessible | current | QAM Module Serial Number Table Entry. |
| 1.3.6.1.4.1.1166.1.31.8.2.3.1.1 | ColumnapexQamModuleSerialNumQamModuleNum | not-accessible | current | QAM Module slot number. |
| 1.3.6.1.4.1.1166.1.31.8.2.3.1.2 | ColumnapexQamModuleSerialNumber | read-only | current | The serial number of an installed QAM Module. Zero if not installed. |
| 1.3.6.1.4.1.1166.1.31.8.2.4 | TableapexQamQrmRevisionTable | not-accessible | current | Table of QAM Module hardware and software revisions. There are 2 QRM modules on each 2x4/2x8 QAM Module. QRMs in QAM Module slots are mapped to table rows as f… |
| 1.3.6.1.4.1.1166.1.31.8.2.4.1 | RowapexQamQrmRevisionEntry | not-accessible | current | QAM Module Revision Table Entry. |
| 1.3.6.1.4.1.1166.1.31.8.2.4.1.1 | ColumnapexQamQrmRevRfPortNum | not-accessible | current | QAM Module Revision Table index. |
| 1.3.6.1.4.1.1166.1.31.8.2.4.1.2 | ColumnapexQamQrmRevBoardId | read-only | current | Model ID of the 4x4 QAM Module or the 2x4/2x8 QAM Module's QRM board. Hex XXYY. |
| 1.3.6.1.4.1.1166.1.31.8.2.4.1.3 | ColumnapexQamQrmRevAppFw | read-only | current | Application firmware version of the 4x4 QAM Module or the 2x4/2x8 QAM Module's QRM board. Hex XXYY where XX is major version and YY is minor version. 'FFFF' in… |
| 1.3.6.1.4.1.1166.1.31.8.2.4.1.4 | ColumnapexQamQrmRevBootLoaderFw | read-only | current | Boot loader firmware version of the 4x4 QAM Module or the 2x4/2x8 QAM Module's QRM board. Hex XXYY where XX is major version and YY is minor version. |
| 1.3.6.1.4.1.1166.1.31.8.2.4.1.5 | ColumnapexQamQrmRevFpga | read-only | current | FPGA version of the 2x4/2x8 QAM Module's QRM board or FPGA1 version of the 4x4 QAM Module. Hex XXYY where XX is major version and YY is minor version. |
| 1.3.6.1.4.1.1166.1.31.8.2.4.1.6 | ColumnapexQamQrmRevHw | read-only | current | Hardware version of the 4x4 QAM Module or the 2x4/2x8 QAM Module's QRM board. Hex XXYY where XX is major version and YY is minor version. |
| 1.3.6.1.4.1.1166.1.31.8.2.4.1.7 | ColumnapexQamQrmRevSerialNumber | read-only | current | The serial number of the 2x4/2x8 QAM Module's QRM board. Used only for 2x4/2x8 QAM Modules. Zero if not installed. |
| 1.3.6.1.4.1.1166.1.31.8.2.4.1.8 | ColumnapexQamQrmRevFpga2 | read-only | current | FPGA2 version of the 4x4 QAM Module. Used only for 4x4 QAM Modules. Hex XXYY where XX is major version and YY is minor version. |
| 1.3.6.1.4.1.1166.1.31.8.2.5 | TableapexQamRfPortStatusTable | not-accessible | current | Table of QAM RF Port Status. Refer to the descriptions of apexQamRfConfigTable and apexQamChannelConfigTable for information on QAM slot, RF Port mapping, and … |
| 1.3.6.1.4.1.1166.1.31.8.2.5.1 | RowapexQamRfPortStatusEntry | not-accessible | current | QAM RF Port Status Table Entry. |
| 1.3.6.1.4.1.1166.1.31.8.2.5.1.1 | ColumnapexQamRfPortStatRfPortNum | not-accessible | current | RF Port number. |
| 1.3.6.1.4.1.1166.1.31.8.2.5.1.2 | ColumnapexQamRfPortStatInfoRate | read-only | current | The information rate of the QAM channels on this RF Port in bits per second. |
| 1.3.6.1.4.1.1166.1.31.8.2.5.1.3 | ColumnapexQamRfPortStatNumChannelsActive | read-only | current | Number of QAM Channels that are present (QAM Module installed) and enabled for use on this RF Port. |
| 1.3.6.1.4.1.1166.1.31.8.2.5.1.4 | ColumnapexQamRfPortStatOutputLevel | read-only | current | Measured per channel RF Output Level. Range is 0 to 8000 representing 0 to 80 dBmV in 0.01 dBmV steps. |
| 1.3.6.1.4.1.1166.1.31.8.2.5.1.5 | ColumnapexQamRfPortStatOutputLevelFault | read-only | current | RF Output Level fault. Indicates if the user configured apexQamRfConfigRfLevelLowThreshold or apexQamRfConfigRfLevelHighThreshold has been reached. |
| 1.3.6.1.4.1.1166.1.31.8.2.5.1.6 | ColumnapexQamRfPortStatTemperature | read-only | current | Temperature of the 2x4/2x8 QAM Module's QRM board ('plate' temp) in degrees Celsius. Used only for 2x4/2x8 QAM Modules. |
| 1.3.6.1.4.1.1166.1.31.8.2.5.1.7 | ColumnapexQamRfPortStatTemperatureFault | read-only | current | Temperature fault of the 2x4/2x8 QAM Module's QRM board ('plate' temp). Used only for 2x4/2x8 QAM Modules. This fault is reported in apexAlarmTemperatureFault … |
| 1.3.6.1.4.1.1166.1.31.8.2.5.1.8 | ColumnapexQamRfPortStat5VdcSupply | read-only | current | Measured level of the +5 VDC supply input of the 2x4/2x8 QAM Module's QRM board. Used only for 2x4/2x8 QAM Modules. Range is 0 to 1000 representing 0 to 10 Vol… |
| 1.3.6.1.4.1.1166.1.31.8.2.5.1.9 | ColumnapexQamRfPortStat5VdcFault | read-only | current | The +5 VDC supply fault of the 2x4/2x8 QAM Module's QRM board. Used only for 2x4/2x8 QAM Modules. Indicates voltage problem that can impair QRM function. |
| 1.3.6.1.4.1.1166.1.31.8.2.5.1.10 | ColumnapexQamRfPortStat3dot3VdcSupply | read-only | current | Measured level of the +3.3 VDC supply input of the 2x4/2x8 QAM Module's QRM board. Used only for 2x4/2x8 QAM Modules. Range is 0 to 1000 representing 0 to 10 V… |
| 1.3.6.1.4.1.1166.1.31.8.2.5.1.11 | ColumnapexQamRfPortStat3dot3VdcFault | read-only | current | The +3.3 VDC supply fault of the 2x4/2x8 QAM Module's QRM board. Used only for 2x4/2x8 QAM Modules. Indicates voltage problem that can impair QRM function. |
| 1.3.6.1.4.1.1166.1.31.8.2.5.1.12 | ColumnapexQamRfPortStatFreqPllLock | read-only | current | Frequency tuning PLL lock status. |
| 1.3.6.1.4.1.1166.1.31.8.2.5.1.13 | ColumnapexQamRfPortStatRefClockPresent | read-only | current | External reference clock present indication. |
| 1.3.6.1.4.1.1166.1.31.8.2.5.1.14 | ColumnapexQamRfPortStatRefClockLock | read-only | current | Board not phase-locked to the External reference clock. |
| 1.3.6.1.4.1.1166.1.31.8.2.5.1.15 | ColumnapexQamRfPortStatDataClockPresent | read-only | current | Data clock present indication. |
| 1.3.6.1.4.1.1166.1.31.8.2.5.1.16 | ColumnapexQamRfPortStatDataSyncFault | read-only | current | One or more of the QAM Channel data interfaces is not synchronized. |
| 1.3.6.1.4.1.1166.1.31.8.2.5.1.17 | ColumnapexQamRfPortStatCommError | read-only | current | Communication with the 2x4/2x8 QAM Module's QRM board has failed. |
| 1.3.6.1.4.1.1166.1.31.8.2.5.1.18 | ColumnapexQamRfPortStatError | read-only | current | Error status on an RF Port basis. These errors are reported in apexAlarmQamRfPortFault. 'major' for: 'outputRfLevel', 'dc5VoltError', 'dc3-3VoltError'. 'critic… |
| 1.3.6.1.4.1.1166.1.31.8.2.5.1.19 | ColumnapexQamRfPortStatFaultCondition | read-only | current | Current fault condition of the RF Port errors. Reflects apexAlarmQamRfPortFault for this RF Port. |
| 1.3.6.1.4.1.1166.1.31.8.2.5.1.20 | ColumnapexQamRfPortStatChanFaultSumm | read-only | current | Roll-up of Channel fault conditions for this RF Port. |
| 1.3.6.1.4.1.1166.1.31.8.2.5.1.21 | ColumnapexQamRfPortStatCodeInitError | read-only | current | Code initialization error of the 2x4/2x8 QAM Module's QRM board. Indicates a code, firmware, or FPGA startup issue. 'fpgaInitError' - FPGA not loaded. Caused b… |
| 1.3.6.1.4.1.1166.1.31.8.2.6 | TableapexQamChannelStatusTable | not-accessible | current | Table of QAM Channel Status. Refer to the descriptions of apexQamRfConfigTable and apexQamChannelConfigTable for information on QAM slot, RF Port mapping, and … |
| 1.3.6.1.4.1.1166.1.31.8.2.6.1 | RowapexQamChannelStatusEntry | not-accessible | current | QAM Channel Status Table Entry. |
| 1.3.6.1.4.1.1166.1.31.8.2.6.1.1 | ColumnapexQamChanStatChannelNum | not-accessible | current | QAM Channel number. |
| 1.3.6.1.4.1.1166.1.31.8.2.6.1.2 | ColumnapexQamChanStatActive | read-only | current | 'active' indicates that mappings can be made to the channel. This means that either: 1) The channel is present (apexQamModuleStatInstalled 'qam2x4Channel' or '… |
| 1.3.6.1.4.1.1166.1.31.8.2.6.1.3 | ColumnapexQamChanStatRfFreq | read-only | current | The center frequency for the QAM Channel in Hz. |
| 1.3.6.1.4.1.1166.1.31.8.2.6.1.4 | ColumnapexQamChanStatEiaChanNum | read-only | current | The EIA Channel number for the QAM Channel. Will be zero if there is no EIA Channel number corresponding to the frequency in use. |
| 1.3.6.1.4.1.1166.1.31.8.2.6.1.5 | ColumnapexQamChanStatDataPresent | read-only | current | Indication of MPEG data activity on the interface for this QAM channel. This includes MPEG null packets. |
| 1.3.6.1.4.1.1166.1.31.8.2.6.1.6 | ColumnapexQamChanStatError | read-only | current | Summary of errors reported on a QAM channel. This is enumerated and the reported error will be the most severe. |
| 1.3.6.1.4.1.1166.1.31.8.2.6.1.7 | ColumnapexQamChanStatFaultCondition | read-only | current | Current fault condition of the QAM channel errors. Reflects apexAlarmQamChannelFault for this QAM Channel. |
| 1.3.6.1.4.1.1166.1.31.8.2.7 | NodeapexQamRfRedundancyStatus | |||
| 1.3.6.1.4.1.1166.1.31.8.2.7.1 | NodeapexQamRfRedundancyStatusGeneral | |||
| 1.3.6.1.4.1.1166.1.31.8.2.7.1.1 | ScalarapexQamRfRedundStatusBackupPort | read-only | current | State of configured backup port. 'disabled' - QAM RF Redundancy is disabled. 'standby' - QAM RF Redundancy is enabled but backup is inactive. No failure has oc… |
| 1.3.6.1.4.1.1166.1.31.8.2.7.1.2 | ScalarapexQamRfRedundStatusFailedPort | read-only | current | Indicates which port (1 to 5) has failed over to the backup port. Zero indicates backup port is not active. |
| 1.3.6.1.4.1.1166.1.31.8.2.7.1.3 | ScalarapexQamRfRedundStatusMismatch | read-only | current | Indicates whether there is a potential for channels being lost when failing to the backup or when switching back to a primary due to a mixture of 2x4 and 2x8 Q… |
| 1.3.6.1.4.1.1166.1.31.8.2.7.1.4 | ScalarapexQamRfRedundStatusUdpPort | read-only | current | UDP Port that is used for QAM RF Redundancy communication between the APEX and REM. When apexQamRfRedundConfigRemConnection is: 'direct' - APEX sends/receives … |
| 1.3.6.1.4.1.1166.1.31.8.2.7.1.5 | ScalarapexQamRfRedundStatusRemConnection | read-only | current | State of communication with REM. 'notApplicable' - QAM RF Redundancy is not enabled and/or the connection to the REM is not enabled. 'notConnected' - Initial c… |
| 1.3.6.1.4.1.1166.1.31.8.2.7.1.6 | ScalarapexQamRfRedundStatusRemError | read-only | current | Status of REM1000 taken from error_code field in REM1000 ack() response (defined in REM1000 Message Stream Protocol). Valid only when apexQamRfRedundConfigRemC… |
| 1.3.6.1.4.1.1166.1.31.8.2.7.1.7 | ScalarapexQamRfRedundStatusRemSwitch | read-only | current | Status of the REM1000 switches indicated through ack() response from REM1000 (e.g. pass-through or switching port 'x'). Valid only when apexQamRfRedundConfigRe… |
| 1.3.6.1.4.1.1166.1.31.8.2.7.1.8 | ScalarapexQamRfRedundStatusInvalidApplyText | read-only | current | When apexQamRfRedundConfigApplyChange is set to 'applyNotInProgressInvalidData' this entry may contain a text description of what was wrong with the data. This… |
| 1.3.6.1.4.1.1166.1.31.8.2.8 | TableapexQamRfPortMuteStatusTable | not-accessible | current | Table of QAM RF Port Mute Status. |
| 1.3.6.1.4.1.1166.1.31.8.2.8.1 | RowapexQamRfPortMuteStatusEntry | not-accessible | current | QAM RF Port Mute Status Table Entry. |
| 1.3.6.1.4.1.1166.1.31.8.2.8.1.1 | ColumnapexQamRfPortMuteStatusRfPortNum | not-accessible | current | RF Port number. |
| 1.3.6.1.4.1.1166.1.31.8.2.8.1.2 | ColumnapexQamRfPortMuteStatus | read-only | current | Indicates whether the QAM channels on the RF port are muted or unmuted. |
| 1.3.6.1.4.1.1166.1.31.8.2.9 | TableapexQamQrmRevisionStatusTable | not-accessible | current | Table of status of QRM hardware and software revisions. Indications of whether they are supported, current, etc.. There are 2 QRM modules on each 2x4/2x8 QAM M… |
| 1.3.6.1.4.1.1166.1.31.8.2.9.1 | RowapexQamQrmRevisionStatusEntry | not-accessible | current | QRM Revision Status Table Entry |
| 1.3.6.1.4.1.1166.1.31.8.2.9.1.1 | ColumnapexQamQrmRevStatQrmNum | not-accessible | current | QRM Revision Status Table index. |
| 1.3.6.1.4.1.1166.1.31.8.2.9.1.2 | ColumnapexQamQrmRevStatBoardId | read-only | current | Status of the Model ID of the 4x4 QAM Module or the 2x4/2x8 QAM Module's QRM board. Refer to apexQamQrmRevisionTable for the revisions of each QRM. |
| 1.3.6.1.4.1.1166.1.31.8.2.9.1.3 | ColumnapexQamQrmRevStatAppFw | read-only | current | Status of Application firmware version of the 4x4 QAM Module or the 2x4/2x8 QAM Module's QRM board. Refer to apexQamQrmRevisionTable for the revisions of each … |
| 1.3.6.1.4.1.1166.1.31.8.2.9.1.4 | ColumnapexQamQrmRevStatBootLoaderFw | read-only | current | Status of Boot loader firmware version of the 4x4 QAM Module or the 2x4/2x8 QAM Module's QRM board. Refer to apexQamQrmRevisionTable for the revisions of each … |
| 1.3.6.1.4.1.1166.1.31.8.2.9.1.5 | ColumnapexQamQrmRevStatFpga | read-only | current | Status of FPGA version of the 2x4/2x8 QAM Module's QRM board or FPGA1 version of the 4x4 QAM Module. Refer to apexQamQrmRevisionTable for the revisions of each… |
| 1.3.6.1.4.1.1166.1.31.8.2.9.1.6 | ColumnapexQamQrmRevStatHw | read-only | current | Status of Hardware version of the 4x4 QAM Module or the 2x4/2x8 QAM Module's QRM board. Refer to apexQamQrmRevisionTable for the revisions of each 4x4 QAM Modu… |
| 1.3.6.1.4.1.1166.1.31.8.2.9.1.7 | ColumnapexQamQrmRevStatQrmSupported | read-only | current | Indicates if the 4x4 QAM Module or the 2x4/2x8 QAM Module's QRM board is supported. Summary of above status. If any 4x4 QAM Module or the 2x4/2x8 QAM Module's … |
| 1.3.6.1.4.1.1166.1.31.8.2.9.1.8 | ColumnapexQamQrmRevStatFpga2 | read-only | current | Status of FPGA2 version of the 4x4 QAM Module. Refer to apexQamQrmRevisionTable for the revisions of each 4x4 QAM Module. Refer to apexQrmFileRevisionTable for… |
| 1.3.6.1.4.1.1166.1.31.8.2.10 | TableapexQamRfPortChannelInfoTable | not-accessible | current | Table of QAM Channel information for each QAM RF Port. Refer to the descriptions of apexQamRfConfigTable and apexQamChannelConfigTable for information on QAM s… |
| 1.3.6.1.4.1.1166.1.31.8.2.10.1 | RowapexQamRfPortChannelInfoEntry | not-accessible | current | QAM RF Port Channel Information Table Entry. |
| 1.3.6.1.4.1.1166.1.31.8.2.10.1.1 | ColumnapexQamRfPortChannelInfoRfPortNum | not-accessible | current | RF Port number. |
| 1.3.6.1.4.1.1166.1.31.8.2.10.1.2 | ColumnapexQamRfPortChannelInfoChanA | read-only | current | QAM Channel number (Output Transport number) of QAM Channel 'A' on this RF port. This may be used to access data in tables indexed by QAM Number or Output Tran… |
| 1.3.6.1.4.1.1166.1.31.8.2.10.1.3 | ColumnapexQamRfPortChannelInfoChanCount | read-only | current | The number of QAM Channels on the RF port. '0' - Indicates RF Port is not present. '4' - RF Port has 4 QAM Channels, 'A'-'D'. '8' - RF Port has 8 QAM Channels,… |
| 1.3.6.1.4.1.1166.1.31.8.2.11 | TableapexQamChannelIdTable | not-accessible | current | Table of QAM Channel Identification data. Identifies the physical location of the QAM Channel (Output Transport Stream) in the APEX chassis. Refer to the descr… |
| 1.3.6.1.4.1.1166.1.31.8.2.11.1 | RowapexQamChannelIdEntry | not-accessible | current | QAM Channel Identification Table Entry. |
| 1.3.6.1.4.1.1166.1.31.8.2.11.1.1 | ColumnapexQamChannelIdChannelNum | not-accessible | current | QAM Channel number (Output Transport number). |
| 1.3.6.1.4.1.1166.1.31.8.2.11.1.2 | ColumnapexQamChannelIdSlotNum | read-only | current | QAM Slot number of the channel. |
| 1.3.6.1.4.1.1166.1.31.8.2.11.1.3 | ColumnapexQamChannelIdRfPortNum | read-only | current | RF Port number of the channel. This may be used to access data in tables indexed by RF Port Number. '0' - Indicates QAM Channel is not present. |
| 1.3.6.1.4.1.1166.1.31.8.2.11.1.4 | ColumnapexQamChannelIdModuleRfPortNum | read-only | current | Module RF Port number of the channel. Corresponds to RF Port numbering on the back of physical QAM Module. '0' - Indicates QAM Channel is not present. |
| 1.3.6.1.4.1.1166.1.31.8.2.11.1.5 | ColumnapexQamChannelIdChannelLetter | read-only | current | The letter symbol ('A'..'H') for the channel. String will be empty if QAM Channel not present. |
| 1.3.6.1.4.1.1166.1.31.8.2.11.1.6 | ColumnapexQamChannelIdChannelDescription | read-only | current | Text description for the QAM Channel (Output Transport Stream). Format is as follows where brackets and bracketed descriptions are replaced by a number/letter … |
| 1.3.6.1.4.1.1166.1.31.8.3 | NodeapexQrmDownload | |||
| 1.3.6.1.4.1.1166.1.31.8.3.1 | NodeapexQrmDownloadConfig | |||
| 1.3.6.1.4.1.1166.1.31.8.3.1.1 | NodeapexQrmDownloadConfigGeneral | |||
| 1.3.6.1.4.1.1166.1.31.8.3.1.2 | TableapexQrmDownloadConfigTable | not-accessible | current | Table of QAM Module Code Download Configuration. There are 2 QRM modules on each 2x4/2x8 QAM Module. QRMs in QAM Module slots are mapped to table rows as follo… |
| 1.3.6.1.4.1.1166.1.31.8.3.1.2.1 | RowapexQrmDownloadConfigEntry | not-accessible | current | QAM Code Download Configuration Table Entry. |
| 1.3.6.1.4.1.1166.1.31.8.3.1.2.1.1 | ColumnapexQrmDownloadConfigQrmNum | not-accessible | current | QAM Code Download Configuration Table index. |
| 1.3.6.1.4.1.1166.1.31.8.3.1.2.1.2 | ColumnapexQrmDownloadConfigRequest | read-write | current | User initiated manual 4x4 QAM Module or 2x4/2x8 QAM Module QRM board Code Download request. Once written, the change to this parameter will take immediate effe… |
| 1.3.6.1.4.1.1166.1.31.8.3.2 | NodeapexQrmDownloadStatus | |||
| 1.3.6.1.4.1.1166.1.31.8.3.2.1 | NodeapexQrmDownloadStatusGeneral | |||
| 1.3.6.1.4.1.1166.1.31.8.3.2.2 | TableapexQrmDownloadStatusTable | not-accessible | current | Table of QAM Module Code Download Status. Refer to apexQrmDownloadConfigTable description for table indexing information. |
| 1.3.6.1.4.1.1166.1.31.8.3.2.2.1 | RowapexQrmDownloadStatusEntry | not-accessible | current | QRM Code Download Status Table Entry. |
| 1.3.6.1.4.1.1166.1.31.8.3.2.2.1.1 | ColumnapexQrmDownloadStatusRfPortNum | not-accessible | current | QAM Code Download Status Table index. |
| 1.3.6.1.4.1.1166.1.31.8.3.2.2.1.2 | ColumnapexQrmDownloadStatusDescription | read-only | current | Text description of the current state of 4x4 QAM Module or 2x4/2x8 QAM Module QRM board Code Download. |
| 1.3.6.1.4.1.1166.1.31.8.3.2.2.1.3 | ColumnapexQrmDownloadProgress | read-only | current | Completion percentage of Code Download. '-1' indicates failure. |
| 1.3.6.1.4.1.1166.1.31.8.3.2.2.1.4 | ColumnapexQrmDownloadSupported | read-only | current | Indicates if the module HW and SW will support Code Download. 'notSupported' if the module is unsupported or the code download might downgrade the code residen… |
| 1.3.6.1.4.1.1166.1.31.8.3.2.2.1.5 | ColumnapexQrmDownloadRequired | read-only | current | Indicates if the module requires Code Download. Code download is needed if the versions are not up to date with the resident APEX FW Release. Refer to apexQamQ… |
| 1.3.6.1.4.1.1166.1.31.8.3.2.2.1.6 | ColumnapexQrmDownloadFileSet | read-only | current | Indicates which file set will be used for this module. |
| 1.3.6.1.4.1.1166.1.31.8.3.2.3 | TableapexQrmFileRevisionTable | not-accessible | current | Table of revisions of QAM Module files released with the resident APEX FW Release. Refer to identSoftwareVersion in BCS-IDENT-MIB for the release number. |
| 1.3.6.1.4.1.1166.1.31.8.3.2.3.1 | RowapexQrmFileRevisionEntry | not-accessible | current | QRM File Revision Table Entry. |
| 1.3.6.1.4.1.1166.1.31.8.3.2.3.1.1 | ColumnapexQrmFileRevFileSetNum | not-accessible | current | QAM file set number. |
| 1.3.6.1.4.1.1166.1.31.8.3.2.3.1.2 | ColumnapexQrmFileRevFirmware | read-only | current | Revision of the Application firmware file of the 2x4/2x8 QAM Module's QRM board or revision of the Application firmware portion of the 4x4 QAM Module Code File… |
| 1.3.6.1.4.1.1166.1.31.8.3.2.3.1.3 | ColumnapexQrmFileRevCalibration | read-only | current | Revision of the Calibration data file of the 2x4/2x8 QAM Module's QRM board. Used only for 2x4/2x8 QAM Module QRM board file sets. Hex XXYY where XX is major v… |
| 1.3.6.1.4.1.1166.1.31.8.3.2.3.1.4 | ColumnapexQrmFileRevFpga | read-only | current | Revision of FPGA firmware file of the 2x4/2x8 QAM Module's QRM board or revision of the FPGA1 firmware portion of the 4x4 QAM Module Code File. Hex XXYY where … |
| 1.3.6.1.4.1.1166.1.31.8.3.2.3.1.5 | ColumnapexQrmFileRevFpga2 | read-only | current | Revision of FPGA2 firmware portion of the 4x4 QAM Module Code File. Used only for 4x4 QAM Module file sets. Hex XXYY where XX is major version and YY is minor … |
| 1.3.6.1.4.1.1166.1.31.8.3.2.3.1.6 | ColumnapexQrmFileRevDateTime | read-only | current | Date and time the 4x4 QAM Module code file was created. Used only for 4x4 QAM Module file sets. Format: 'MM/DD/YYYY HH:MM' Where HH is a 24 hour clock. |
| 1.3.6.1.4.1.1166.1.31.9 | NodeapexSessionControl | |||
| 1.3.6.1.4.1.1166.1.31.9.1 | NodeapexSessionControlConfig | |||
| 1.3.6.1.4.1.1166.1.31.9.1.1 | NodeapexSessionControlConfigGeneral | |||
| 1.3.6.1.4.1.1166.1.31.9.1.1.1 | ScalarapexSesContConfProtocol | read-write | current | The communication protocol for output streams in Session Control operating mode. This determines the type of protocol the APEX will use to communicate with an … |
| 1.3.6.1.4.1.1166.1.31.9.1.1.2 | ScalarapexSesContConfTableApplyChange | read-write | current | The Apply for the apexSesContConfTable. This parameter MUST be set to 'apply' in order for any of the data in the apexSesContConfTable to take effect. This par… |
| 1.3.6.1.4.1.1166.1.31.9.1.1.3 | ScalarapexSesContConfRateCompareType | read-write | current | This is the rate to use for comparing input streams. It is either Information rate or Stream rate. This applies to monitoring for Bit Rate alarming and monitor… |
| 1.3.6.1.4.1.1166.1.31.9.1.1.4 | ScalarapexSesContConfRedundThreshold | read-write | obsolete | This object is obsolete. Session Control Redundancy Threshold. This is the percent used to determine Fail Over from Primary to Secondary, and Switch Back from … |
| 1.3.6.1.4.1.1166.1.31.9.1.1.5 | ScalarapexSesContConfInputPreEncryptCheck | read-write | current | Session Control Pre-Encryption Checking. Indicates if the APEX is to check if the input service is pre-encrypted or clear. Pre-encrypted is determined by exami… |
| 1.3.6.1.4.1.1166.1.31.9.1.1.6 | ScalarapexSesContConfRedundType | read-write | current | The redundancy type for output streams in Session Control operating mode. - hotWarm indicates only 1 input stream, primary or secondary, is open at any one tim… |
| 1.3.6.1.4.1.1166.1.31.9.1.1.7 | ScalarapexSesContConfFollowDtcp | read-write | current | Determines how the copy protection settings (CCI, APS, and CIT) within the PRK will be set. All outputs in Session Control (SDV) mode will use this setting for… |
| 1.3.6.1.4.1.1166.1.31.9.1.2 | TableapexSesContConfTable | not-accessible | current | This is a table of Session Control configuration parameters for each output transport stream. This table defines the primary and secondary Gigabit Ethernet int… |
| 1.3.6.1.4.1.1166.1.31.9.1.2.1 | RowapexSesContConfEntry | not-accessible | current | Session Control Configuration Table Entry. |
| 1.3.6.1.4.1.1166.1.31.9.1.2.1.1 | ColumnapexSesContConfOutputTsNum | not-accessible | current | Output transport stream number (index). |
| 1.3.6.1.4.1.1166.1.31.9.1.2.1.2 | ColumnapexSesContConfGbePrimaryInterface | read-write | current | The primary Gbe interface for Session Control. Zero indicates not available. This parameter cannot be changed for any output stream if there is at least 1 acti… |
| 1.3.6.1.4.1.1166.1.31.9.1.2.1.3 | ColumnapexSesContConfGbeSecondaryInterface | read-write | current | The secondary Gbe interface for RPC SDV. Zero indicates not available. This parameter cannot be changed for any output stream if there is at least 1 active ses… |
| 1.3.6.1.4.1.1166.1.31.9.2 | NodeapexSessionControlStatus | |||
| 1.3.6.1.4.1.1166.1.31.9.2.1 | NodeapexSessionControlStatusGeneral | |||
| 1.3.6.1.4.1.1166.1.31.9.2.1.1 | ScalarapexSesContStatProtocol | read-only | current | The communication protocol in use for output streams in Session Control operating mode. |
| 1.3.6.1.4.1.1166.1.31.9.3 | NodeapexRpc | |||
| 1.3.6.1.4.1.1166.1.31.9.3.1 | NodeapexRpcConfig | |||
| 1.3.6.1.4.1.1166.1.31.9.3.1.1 | NodeapexRpcConfigGeneral | |||
| 1.3.6.1.4.1.1166.1.31.9.3.1.1.1 | ScalarapexRpcDataCarouselProgram | read-write | current | Indicates which Input Program Number to use for the Data Carousel. The data carousel in SDV mode (RPC or RTSP) is on a fixed PMT PID along with a fixed compone… |
| 1.3.6.1.4.1.1166.1.31.9.3.1.1.2 | ScalarapexRpcReportAllSessions | read-write | current | Session reporting mode. Indicates what sessions will be reported when the APEX is requested to report sessions to a manager. When 'enabled', the APEX will repo… |
| 1.3.6.1.4.1.1166.1.31.9.3.1.1.3 | ScalarapexRpcDeviceName | read-write | current | The device name of this APEX. This variable is only used to generate an XML configuration file via the EM. Once written, the change to this parameter will take… |
| 1.3.6.1.4.1.1166.1.31.9.3.1.1.4 | ScalarapexRpcDeviceType | read-write | current | The device type string reported in XML configuration file. This variable is only used to generate an XML configuration file via the EM. Once written, the chang… |
| 1.3.6.1.4.1.1166.1.31.9.3.1.1.5 | ScalarapexRpcControlInterface | read-write | current | The Enet interface that will be used to set the IP address attribute in the generated XML file. This variable is only used to generate an XML configuration fil… |
| 1.3.6.1.4.1.1166.1.31.9.3.1.1.6 | ScalarapexRpcNumShellSessions | read-write | current | The number of shell sessions to be created on each channel marked for session control mode. This variable is only used to generate an XML configuration file vi… |
| 1.3.6.1.4.1.1166.1.31.9.3.1.1.7 | ScalarapexRpcAvgBandwidthEnable | read-write | current | When enabled the APEX populates the sessionRate in the QuerySessionInfo Response message with groupRate divided by the number of sessionIds in the group. The v… |
| 1.3.6.1.4.1.1166.1.31.9.3.1.1.8 | ScalarapexRpcApplyChange | read-write | current | The Apply for RPC Settings. This applies to apexRpcControlInterface, apexRpcNumShellSessions, apexRpcRfPortServiceGroup. @Config(config=no, reboot=no) |
| 1.3.6.1.4.1.1166.1.31.9.3.1.2 | TableapexRpcRfPortTable | not-accessible | current | Table of Configuration data for RPC Session RF Ports. This variable is only used to generate an XML configuration file via the EM. |
| 1.3.6.1.4.1.1166.1.31.9.3.1.2.1 | RowapexRpcRfPortEntry | not-accessible | current | RPC RF Port Configuration Table Entry. |
| 1.3.6.1.4.1.1166.1.31.9.3.1.2.1.1 | ColumnapexRpcRfPortNum | not-accessible | current | The RF Port number. |
| 1.3.6.1.4.1.1166.1.31.9.3.1.2.1.2 | ColumnapexRpcRfPortName | read-write | current | The RF Port name. Once written, the change to this parameter will take immediate effect. In order for the change to persist through subsequent reboots or power… |
| 1.3.6.1.4.1.1166.1.31.9.3.1.2.1.3 | ColumnapexRpcRfPortServiceGroup | read-write | current | The RF Port service group. Once written, the change to this parameter will only take immediate effect after apexRpcApplyChange is changed to 'apply'. In order … |
| 1.3.6.1.4.1.1166.1.31.9.3.1.3 | TableapexRpcRfChannelTable | not-accessible | current | Table of Configuration data for RPC Session RF Channels. This variable is only used to generate an XML configuration file via the EM. Once written, the change … |
| 1.3.6.1.4.1.1166.1.31.9.3.1.3.1 | RowapexRpcRfChannelEntry | not-accessible | current | RPC RF Channel Configuration Table Entry. |
| 1.3.6.1.4.1.1166.1.31.9.3.1.3.1.1 | ColumnapexRpcRfChannelNum | not-accessible | current | The RF Channel number. |
| 1.3.6.1.4.1.1166.1.31.9.3.1.3.1.2 | ColumnapexRpcRfChannelName | read-write | current | The name of this RF Channel. |
| 1.3.6.1.4.1.1166.1.31.9.3.2 | NodeapexRpcStatus | |||
| 1.3.6.1.4.1.1166.1.31.9.3.2.1 | NodeapexRpcStatusGeneral | |||
| 1.3.6.1.4.1.1166.1.31.9.3.2.2 | TableapexRpcSessionStatTable | not-accessible | current | Table of RPC Switched Digital Video Session status. This table contains 1 row up to the maximum number of service mappings supported. |
| 1.3.6.1.4.1.1166.1.31.9.3.2.2.1 | RowapexRpcSessionStatEntry | not-accessible | current | RPC Switched Digital Video Session Status Table Entry. |
| 1.3.6.1.4.1.1166.1.31.9.3.2.2.1.1 | ColumnapexRpcSessionStatIndex | not-accessible | current | The RPC Switched Digital Video Session Status table index. |
| 1.3.6.1.4.1.1166.1.31.9.3.2.2.1.2 | ColumnapexRpcSessionStatInputTsIndex | read-only | current | The index into the apexInputTsStatTable. |
| 1.3.6.1.4.1.1166.1.31.9.3.2.2.1.3 | ColumnapexRpcSessionStatInputProgramNum | read-only | current | The Gigabit Ethernet Input Program Number. A value of zero (0) indicates that the input is an SPTS and the first program listed in the input PAT will be mapped… |
| 1.3.6.1.4.1.1166.1.31.9.3.2.2.1.4 | ColumnapexRpcSessionStatSourceIpAddr3 | read-only | current | The Gigabit Ethernet IGMP v3 Source IP Address 3. This IP address is currently unsupported by the APEX. |
| 1.3.6.1.4.1.1166.1.31.9.3.2.2.1.5 | ColumnapexRpcSessionStatOutputQamChannel | read-only | current | The Output QAM Channel. |
| 1.3.6.1.4.1.1166.1.31.9.3.2.2.1.6 | ColumnapexRpcSessionStatOutputProgramNum | read-only | current | The Output Program Number (1 - 65535). |
| 1.3.6.1.4.1.1166.1.31.9.3.2.2.1.7 | ColumnapexRpcSessionStatProgramBandwidth | read-only | current | The Expected Program Bandwidth (bps). This is the bandwidth of the program as defined in the service mapping. A value of 0 indicates that the program BW is unk… |
| 1.3.6.1.4.1.1166.1.31.9.3.2.2.1.8 | ColumnapexRpcSessionStatSessionType | read-only | current | The Type of session (SDV binding or VOD/Broadcast session). 1 = Switched Digital Video (SDV) 2 = VOD or Broadcast |
| 1.3.6.1.4.1.1166.1.31.9.3.2.2.1.9 | ColumnapexRpcSessionStatSessionIdWord1 | read-only | current | The Session ID Word 1. Session IDs are 10 byte character arrays. Session IDs are be stored as 3 4-byte words (3 ulongs) in this MIB. First 2 Bytes are always 0… |
| 1.3.6.1.4.1.1166.1.31.9.3.2.2.1.10 | ColumnapexRpcSessionStatSessionIdWord2 | read-only | current | The Session ID Word 2. Session IDs are 10 byte character arrays. Session IDs are be stored as 3 4-byte words (3 Unsigned32) in this MIB. First 2 Bytes are alwa… |
| 1.3.6.1.4.1.1166.1.31.9.3.2.2.1.11 | ColumnapexRpcSessionStatSessionIdWord3 | read-only | current | The Session ID Word 3. Session IDs are 10 byte character arrays. Session IDs are be stored as 3 4-byte words (3 Unsigned32) in this MIB. First 2 Bytes are alwa… |
| 1.3.6.1.4.1.1166.1.31.9.3.2.2.1.12 | ColumnapexRpcSessionStatManagerIpAddr | read-only | current | The IP address of the RPC SDV, VOD, or Broadcast manager sending session commands. |
| 1.3.6.1.4.1.1166.1.31.9.3.2.3 | TableapexRpcQamStatTable | not-accessible | current | Table of RPC Switched Digital Video QAM status. This table is indexed by output stream number and 48 rows. |
| 1.3.6.1.4.1.1166.1.31.9.3.2.3.1 | RowapexRpcQamStatEntry | not-accessible | current | RPC Switched Digital Video QAM Status Table Entry. |
| 1.3.6.1.4.1.1166.1.31.9.3.2.3.1.1 | ColumnapexRpcQamStatQamChannelNum | not-accessible | current | The RPC Switched Digital Video QAM Status table index. |
| 1.3.6.1.4.1.1166.1.31.9.3.2.3.1.2 | ColumnapexRpcQamStatNumSdvSessions | read-only | current | The Number of reserved SDV sessions on this QAM Channel. This is the number of SDV sessions that have been reserved by the manager. Each SDV session requires t… |
| 1.3.6.1.4.1.1166.1.31.9.3.2.3.1.3 | ColumnapexRpcQamStatNumVodBcSessions | read-only | current | The Number of VOD/Broadcast sessions on this QAM Channel. This is the number of VOD/Broadcast sessions active on a QAM Channel. Since VOD and Broadcast session… |
| 1.3.6.1.4.1.1166.1.31.9.3.2.3.1.4 | ColumnapexRpcQamStatSdvGroupBandwidth | read-only | current | The Group BW for SDV sessions (not used for VOD/Broadcast sessions). This is the total amount of BW allocated for all SDV sessions on a channel. The total SDV … |
| 1.3.6.1.4.1.1166.1.31.9.4 | NodeapexRtsp | |||
| 1.3.6.1.4.1.1166.1.31.9.4.1 | NodeapexRtspConfig | |||
| 1.3.6.1.4.1.1166.1.31.9.4.1.1 | NodeapexRtspConfigGeneral | |||
| 1.3.6.1.4.1.1166.1.31.9.4.1.1.1 | ScalarapexRtspReportGbeInterfaces | read-write | current | This selects which pair of GBE interfaces are to be reported to the RTSP controller (ERM) via VREP. The pairedPortAssignment selection allows for both pairs of… |
| 1.3.6.1.4.1.1166.1.31.9.4.1.2 | TableapexRtspConfControllerApplyTable | not-accessible | current | Table of Apply Change for the data for apexRtspConfControllerTable. A row of this table corresponds to a row in apexRtspConfControllerTable. |
| 1.3.6.1.4.1.1166.1.31.9.4.1.2.1 | RowapexRtspConfControllerApplyEntry | not-accessible | current | RTSP Controller Configuration Apply Table Entry. |
| 1.3.6.1.4.1.1166.1.31.9.4.1.2.1.1 | ColumnapexRtspConfControllerApplyNum | not-accessible | current | The RTSP Session Controller number. |
| 1.3.6.1.4.1.1166.1.31.9.4.1.2.1.2 | ColumnapexRtspConfControllerApplyChange | read-write | current | The Apply for a row of data in apexRtspConfControllerTable and apexRtspConfControlNamesTable. A row in this table corresponds to the same row index in the apex… |
| 1.3.6.1.4.1.1166.1.31.9.4.1.3 | TableapexRtspConfControllerTable | not-accessible | current | Table of RTSP configuration items configurable on a Controller basis. Once written, the change to this table will only take immediate effect after apexRtspConf… |
| 1.3.6.1.4.1.1166.1.31.9.4.1.3.1 | RowapexRtspConfControllerEntry | not-accessible | current | RTSP Controller Configuration Table Entry. |
| 1.3.6.1.4.1.1166.1.31.9.4.1.3.1.1 | ColumnapexRtspConfControllerNum | not-accessible | current | The Controller Number. APEX currently supports only one controller. |
| 1.3.6.1.4.1.1166.1.31.9.4.1.3.1.2 | ColumnapexRtspConfControllerIp | read-write | current | The IP Address of the RTSP session controller. |
| 1.3.6.1.4.1.1166.1.31.9.4.1.3.1.3 | ColumnapexRtspConfControllerPort | read-write | current | Port for the RTSP session controller. |
| 1.3.6.1.4.1.1166.1.31.9.4.1.3.1.4 | ColumnapexRtspConfControllerHoldTime | read-write | current | The session hold time in seconds. If the APEX does not receive a keep session alive message from the controller in this time the APEX will close the session. T… |
| 1.3.6.1.4.1.1166.1.31.9.4.1.3.1.5 | ColumnapexRtspConfControllerBandwidthDelta | read-write | current | The Bandwidth Delta, in kilobits per second (kbps), for sending an Update Message. Whenever a QAM Channel's output utilization changes by more than the bandwid… |
| 1.3.6.1.4.1.1166.1.31.9.4.1.4 | TableapexRtspConfControlNamesTable | not-accessible | current | Table of RTSP configuration items configurable on a Controller basis. Contains the control names. This table is a row-for-row index match to the apexRtspConfCo… |
| 1.3.6.1.4.1.1166.1.31.9.4.1.4.1 | RowapexRtspConfControlNamesEntry | not-accessible | current | RTSP Controller Names Configuration Table Entry. |
| 1.3.6.1.4.1.1166.1.31.9.4.1.4.1.1 | ColumnapexRtspConfControlNamesNum | not-accessible | current | The Controller Number. APEX currently supports only one controller. |
| 1.3.6.1.4.1.1166.1.31.9.4.1.4.1.2 | ColumnapexRtspConfControlNamesStreamingZone | read-write | current | The streaming zone that the APEX is a member of. |
| 1.3.6.1.4.1.1166.1.31.9.4.1.4.1.3 | ColumnapexRtspConfControlNamesDeviceName | read-write | current | The device name of this APEX. |
| 1.3.6.1.4.1.1166.1.31.9.4.1.5 | TableapexRtspConfQamChannelApplyTable | not-accessible | current | Table of Apply Change for the data for apexRtspConfQamChannelTable. A row of this table corresponds to a row in apexRtspConfQamChannelTable. |
| 1.3.6.1.4.1.1166.1.31.9.4.1.5.1 | RowapexRtspConfQamChannelApplyEntry | not-accessible | current | RTSP QAM Configuration Apply Table Entry. |
| 1.3.6.1.4.1.1166.1.31.9.4.1.5.1.1 | ColumnapexRtspConfQamChannelApplyNum | not-accessible | current | The QAM Channel number. |
| 1.3.6.1.4.1.1166.1.31.9.4.1.5.1.2 | ColumnapexRtspConfQamChannelApplyChange | read-write | current | The Apply for a row of data in apexRtspConfQamChannelTable. A row in this table corresponds to the same row index in the apexRtspConfQamChannelTable. This para… |
| 1.3.6.1.4.1.1166.1.31.9.4.1.6 | TableapexRtspConfQamChannelTable | not-accessible | current | Table of Configuration data for RTSP Session QAM Channels. Once written, the change to this table will only take immediate effect after apexRtspConfQamChannelA… |
| 1.3.6.1.4.1.1166.1.31.9.4.1.6.1 | RowapexRtspConfQamChannelEntry | not-accessible | current | RTSP QAM Configuration Table Entry. |
| 1.3.6.1.4.1.1166.1.31.9.4.1.6.1.1 | ColumnapexRtspConfQamChannelNum | not-accessible | current | The QAM Channel number. |
| 1.3.6.1.4.1.1166.1.31.9.4.1.6.1.2 | ColumnapexRtspConfQamChannelGroupName | read-write | current | The QAM Group Name that this QAM Channel is a member of. |
| 1.3.6.1.4.1.1166.1.31.9.4.1.7 | TableapexRtspConfGbeEdgeGroupTable | not-accessible | current | Table of Configuration data for RTSP Session GigE Interfaces. Once written, the change to this table will take immediate effect. In order for the change to per… |
| 1.3.6.1.4.1.1166.1.31.9.4.1.7.1 | RowapexRtspConfGbeEdgeGroupEntry | not-accessible | current | RTSP GigE Edge Group Configuration Table Entry. |
| 1.3.6.1.4.1.1166.1.31.9.4.1.7.1.1 | ColumnapexRtspConfGbeEdgeGroupNum | not-accessible | current | The GigE Edge Group Interface number. |
| 1.3.6.1.4.1.1166.1.31.9.4.1.7.1.2 | ColumnapexRtspConfGbeEdgeGroupName | read-write | current | The Name of this GigE Interface. |
| 1.3.6.1.4.1.1166.1.31.9.4.1.8 | TableapexRtspConfMhaTable | not-accessible | current | Table of MHA RTSP configuration items configurable on a Controller basis. Once written, the change to this table will only take immediate effect after apexRtsp… |
| 1.3.6.1.4.1.1166.1.31.9.4.1.8.1 | RowapexRtspConfMhaEntry | not-accessible | current | MHA RTSP Configuration Table Entry. |
| 1.3.6.1.4.1.1166.1.31.9.4.1.8.1.1 | ColumnapexRtspConfMhaNum | not-accessible | current | The MHA Controller Number. APEX currently supports only one controller. |
| 1.3.6.1.4.1.1166.1.31.9.4.1.8.1.2 | ColumnapexRtspConfMhaAddressDomain | read-write | current | Address Domain of the sender used in ERRP. Address Domain of the ERM and APEX must match in order to establish an ERRP connection. Zero is used as the global a… |
| 1.3.6.1.4.1.1166.1.31.9.4.1.8.1.3 | ColumnapexRtspConfMhaPort | read-write | current | Port for the MHA session controller. |
| 1.3.6.1.4.1.1166.1.31.9.4.1.9 | NodeapexRtspConfMhaGeneral | |||
| 1.3.6.1.4.1.1166.1.31.9.4.1.9.1 | ScalarapexRtspConfMhaUdpMapEnable | read-write | current | Indicates if the UDP Map is populated in the Update message sent by the APEX to the ERM when in MHA mode. When 'enabled', the APEX will report UDP ports availa… |
| 1.3.6.1.4.1.1166.1.31.9.4.1.10 | NodeapexRtspConfMhaSbe | |||
| 1.3.6.1.4.1.1166.1.31.9.4.1.10.1 | ScalarapexRtspConfMhaSbeEncryptionMode | read-write | current | This parameter is used to set the Session based Encryption Mode. It applies to all session based encryption sessions. - 'full' - The APEX will use Full encrypt… |
| 1.3.6.1.4.1.1166.1.31.9.4.1.10.2 | ScalarapexRtspConfMhaSbeCciLevel | read-write | current | Copy Control Information (CCI) Level setting for session based PRK messages if CCI is not defined in the XML encryption blob. - notDefined - CCI is not defined… |
| 1.3.6.1.4.1.1166.1.31.9.4.1.10.3 | ScalarapexRtspConfMhaSbeApsLevel | read-write | current | Analog Protection System (APS) Level setting for session based PRK messages if APS is not defined in the XML encryption blob. Defines what copy protection enco… |
| 1.3.6.1.4.1.1166.1.31.9.4.1.10.4 | ScalarapexRtspConfMhaSbeCitSetting | read-write | current | Copy protection Constraint Image Trigger setting. This is only applicable when the session is being encrypted and the CIT setting was not contained in the XML … |
| 1.3.6.1.4.1.1166.1.31.9.4.1.10.5 | ScalarapexRtspConfMhaSbeApplyChange | read-write | current | The Apply for the MHA session based encryption settings. This parameter MUST be set to 'apply' in order for any of the data in MHA SBE to take effect in the AP… |
| 1.3.6.1.4.1.1166.1.31.9.4.2 | NodeapexRtspStatus | |||
| 1.3.6.1.4.1.1166.1.31.9.4.2.1 | NodeapexRtspStatusGeneral | |||
| 1.3.6.1.4.1.1166.1.31.9.4.2.2 | TableapexRtspSessionStatTable | not-accessible | current | Table of RTSP Session status. This table contains 768 rows. |
| 1.3.6.1.4.1.1166.1.31.9.4.2.2.1 | RowapexRtspSessionStatEntry | not-accessible | current | RTSP Session Status Table Entry. |
| 1.3.6.1.4.1.1166.1.31.9.4.2.2.1.1 | ColumnapexRtspSessionStatIndex | not-accessible | current | The RTSP Session Status table index. |
| 1.3.6.1.4.1.1166.1.31.9.4.2.2.1.2 | ColumnapexRtspSessionStatInputTsIndex | read-only | current | The index into the apexInputTsStatTable. |
| 1.3.6.1.4.1.1166.1.31.9.4.2.2.1.3 | ColumnapexRtspSessionStatInputProgramNum | read-only | current | The Gigabit Ethernet Input Program Number. A value of zero (0) indicates that the input is an SPTS and the first program listed in the input PAT will be mapped… |
| 1.3.6.1.4.1.1166.1.31.9.4.2.2.1.4 | ColumnapexRtspSessionStatOutputQamChannel | read-only | current | The Output QAM Channel. |
| 1.3.6.1.4.1.1166.1.31.9.4.2.2.1.5 | ColumnapexRtspSessionStatOutputProgramNum | read-only | current | The Output Program Number. |
| 1.3.6.1.4.1.1166.1.31.9.4.2.2.1.6 | ColumnapexRtspSessionStatProgramBandwidth | read-only | current | The Expected Program Bandwidth (bps). This is the bandwidth of the program as defined in the service mapping. A value of 0 indicates that the program BW is unk… |
| 1.3.6.1.4.1.1166.1.31.9.4.2.2.1.7 | ColumnapexRtspSessionStatManagerIpAddr | read-only | current | The IP address of the manager sending session commands. |
| 1.3.6.1.4.1.1166.1.31.9.4.2.3 | TableapexRtspSessionIdTable | not-accessible | current | Table of RTSP Session Ids. This table contains 768 rows and is a row-for-row index match to apexRtspSessionStatTable. |
| 1.3.6.1.4.1.1166.1.31.9.4.2.3.1 | RowapexRtspSessionIdEntry | not-accessible | current | RTSP Session ID Table Entry. |
| 1.3.6.1.4.1.1166.1.31.9.4.2.3.1.1 | ColumnapexRtspSessionIdIndex | not-accessible | current | The RTSP Session ID table index. This is a row-for-row match to the RTSP Session Status table index. |
| 1.3.6.1.4.1.1166.1.31.9.4.2.3.1.2 | ColumnapexRtspSessionId | read-only | current | The Session ID. |
| 1.3.6.1.4.1.1166.1.31.9.4.2.4 | TableapexRtspQamStatTable | not-accessible | current | Table of RTSP Session QAM status. This table is indexed by QAM channel number and contains 48 rows. |
| 1.3.6.1.4.1.1166.1.31.9.4.2.4.1 | RowapexRtspQamStatEntry | not-accessible | current | RTSP Session QAM status Table Entry. |
| 1.3.6.1.4.1.1166.1.31.9.4.2.4.1.1 | ColumnapexRtspQamStatQamChannelNum | not-accessible | current | The RTSP Session Control Video QAM Status table index. |
| 1.3.6.1.4.1.1166.1.31.9.4.2.4.1.2 | ColumnapexRtspQamStatNumSessions | read-only | current | The Number of active sessions on this QAM Channel. |
| 1.3.6.1.4.1.1166.1.31.9.4.2.4.1.3 | ColumnapexRtspQamStatAllocatedBandwidth | read-only | current | This is the total amount of BW allocated for all sessions on a channel. |
| 1.3.6.1.4.1.1166.1.31.9.4.2.5 | TableapexRtspStatControllerTable | not-accessible | current | Table of RTSP status items configurable on a Controller basis. |
| 1.3.6.1.4.1.1166.1.31.9.4.2.5.1 | RowapexRtspStatControllerEntry | not-accessible | current | RTSP Controller Status Table Entry. |
| 1.3.6.1.4.1.1166.1.31.9.4.2.5.1.1 | ColumnapexRtspStatControllerNum | not-accessible | current | The Controller Number. APEX currently supports only one controller. |
| 1.3.6.1.4.1.1166.1.31.9.4.2.5.1.2 | ColumnapexRtspStatControllerDiscovery | read-only | current | Status of Controller to APEX discovery. |
| 1.3.6.1.4.1.1166.1.31.9.4.2.5.1.3 | ColumnapexRtspStatControllerConnection | read-only | current | Status of the connection between the APEX and the Controller. 'notConnected' causes apexAlarmRtspControllerCommFault. |
| 1.3.6.1.4.1.1166.1.31.9.4.2.5.1.4 | ColumnapexRtspStatControllerCommFault | read-only | current | Current fault condition of apexRtspStatControllerConnection. This is the apexAlarmRtspControllerCommFault level for this controller. |
| 1.3.6.1.4.1.1166.1.31.9.4.2.6 | TableapexRtspStatQamChannelTable | not-accessible | current | Table of Status data for RTSP Session QAM Channels. |
| 1.3.6.1.4.1.1166.1.31.9.4.2.6.1 | RowapexRtspStatQamChannelEntry | not-accessible | current | RTSP QAM Configuration Table Entry. |
| 1.3.6.1.4.1.1166.1.31.9.4.2.6.1.1 | ColumnapexRtspStatQamChannelNum | not-accessible | current | The QAM Channel number. |
| 1.3.6.1.4.1.1166.1.31.9.4.2.6.1.2 | ColumnapexRtspStatQamChannelName | read-only | current | The Name of this QAM Channel. |
| 1.3.6.1.4.1.1166.1.31.9.4.2.7 | TableapexRtspStatQamMptsModeTable | not-accessible | current | Table of MPTS Mode Status data for RTSP Session QAM Channels. |
| 1.3.6.1.4.1.1166.1.31.9.4.2.7.1 | RowapexRtspStatQamMptsModeEntry | not-accessible | current | RTSP QAM MPTS Mode Configuration Table Entry. |
| 1.3.6.1.4.1.1166.1.31.9.4.2.7.1.1 | ColumnapexRtspStatQamMptsModeQamChannelNum | not-accessible | current | The QAM Channel number. |
| 1.3.6.1.4.1.1166.1.31.9.4.2.7.1.2 | ColumnapexRtspStatQamMptsModeQamChannelMode | read-only | current | The MPTS mode of this QAM Channel. The first session established on the QAM channel defines the MPTS mode. Each new session must have the same mode as long as … |
| 1.3.6.1.4.1.1166.1.31.10 | NodeapexManualRouting | |||
| 1.3.6.1.4.1.1166.1.31.10.1 | NodeapexManualRoutingConfig | |||
| 1.3.6.1.4.1.1166.1.31.10.1.1 | NodeapexManualRoutingConfigGeneral | |||
| 1.3.6.1.4.1.1166.1.31.10.1.1.1 | ScalarapexManualRouteRmdClear | read-write | current | Clear all RMD information from DRAM and flash. Note that apexManualRouteEnable must be set to disabled for all rows before RMD information will be cleared by t… |
| 1.3.6.1.4.1.1166.1.31.10.1.2 | TableapexManualRouteApplyTable | not-accessible | current | Table of Apply Change for the data for Manual Route Table. A row in this table corresponds to the same row index in the Manual Route table. |
| 1.3.6.1.4.1.1166.1.31.10.1.2.1 | RowapexManualRouteApplyEntry | not-accessible | current | Manual Route Apply Table Entry. |
| 1.3.6.1.4.1.1166.1.31.10.1.2.1.1 | ColumnapexManualRouteApplyIndex | not-accessible | current | The index of the Manual Route Apply Table. |
| 1.3.6.1.4.1.1166.1.31.10.1.2.1.2 | ColumnapexManualRouteApplyChange | read-write | current | The Apply for the row of data in the Manual Route Table. A row in this table corresponds to the same row index in the Manual Route table. This parameter MUST b… |
| 1.3.6.1.4.1.1166.1.31.10.1.3 | TableapexManualRouteTable | not-accessible | current | Table of data for Manual Routes. Once written, the change to a row this table will only take immediate effect after the appropriate apexManualRouteApplyChange … |
| 1.3.6.1.4.1.1166.1.31.10.1.3.1 | RowapexManualRouteEntry | not-accessible | current | Manual Route Table Entry. |
| 1.3.6.1.4.1.1166.1.31.10.1.3.1.1 | ColumnapexManualRouteIndex | not-accessible | current | The index of the Manual Route Table. |
| 1.3.6.1.4.1.1166.1.31.10.1.3.1.2 | ColumnapexManualRouteEnable | read-write | current | Indicates that this Manual Route is enabled or disabled. |
| 1.3.6.1.4.1.1166.1.31.10.1.3.1.3 | ColumnapexManualRouteInputType | read-write | current | Input Type of input from which to obtain data. |
| 1.3.6.1.4.1.1166.1.31.10.1.3.1.4 | ColumnapexManualRouteInputInterface | read-write | current | Number of the input interface, of type configured by Input Type, from which to obtain data. Range: '0' = Not Applicable GBE = 1-4 FastEnet = 1-2 |
| 1.3.6.1.4.1.1166.1.31.10.1.3.1.5 | ColumnapexManualRouteInputUdp | read-write | current | Input UDP Port from which to obtain data. Range: GBE = 0-65535 FastEnet = 1024-65535 |
| 1.3.6.1.4.1.1166.1.31.10.1.3.1.6 | ColumnapexManualRouteInputMulticastIp | read-write | current | Input Multicast IP address from which to obtain data. An IP address of 0.0.0.0 indicates table entry not in use. Multicast IP addresses 224.0.0.0 to 224.0.0.25… |
| 1.3.6.1.4.1.1166.1.31.10.1.3.1.7 | ColumnapexManualRouteInputSourceIp | read-write | current | Input IGMP v3 Source IP from which to obtain data. If the router supports IGMP v3 the GBE will only receive data from this source IP. If Source IP is not speci… |
| 1.3.6.1.4.1.1166.1.31.10.1.3.1.8 | ColumnapexManualRouteInputProgNum | read-write | current | Input MPEG Program Number to multiplex. A value of 0 can be used as a wild card. This will cause the APEX to map the first program listed in the input PAT to t… |
| 1.3.6.1.4.1.1166.1.31.10.1.3.1.9 | ColumnapexManualRouteInputPreEncryptCheck | read-write | current | Manual Routing Pre-Encryption Checking. Indicates if the APEX is to check if the input service is pre-encrypted or clear. Pre-encrypted is determined by examin… |
| 1.3.6.1.4.1.1166.1.31.10.1.3.1.10 | ColumnapexManualRouteOutputTsNum | read-write | current | Output Transport Stream Number of the output on which to place data. Zero = NotApplicable and is only valid if the apexManualRouteTable entry is not being used. |
| 1.3.6.1.4.1.1166.1.31.10.1.3.1.11 | ColumnapexManualRouteOutputProgNum | read-write | current | Output Program number to use for the program. Zero = NotApplicable and is only valid if the apexManualRouteTable entry is not being used. |
| 1.3.6.1.4.1.1166.1.31.10.1.3.1.12 | ColumnapexManualRouteOutputEncryptMode | read-write | current | Encryption Mode. Not supported. |
| 1.3.6.1.4.1.1166.1.31.10.1.3.1.13 | ColumnapexManualRouteOutputCopyProtectSource | read-write | current | Copy Protection Source. Not supported. |
| 1.3.6.1.4.1.1166.1.31.10.1.3.1.14 | ColumnapexManualRouteSourceId | read-write | current | Broadcast Encryption Source ID. Only applies to programs if the input type is Gbe and the output encryption mode is Broadcast Encryption. (apexOutputTsConfEncr… |
| 1.3.6.1.4.1.1166.1.31.10.1.3.1.15 | ColumnapexManualRouteProviderId | read-write | current | Broadcast Encryption Provider ID. Only applies to programs if the input type is Gbe and the output encryption mode is Broadcast Encryption. (apexOutputTsConfEn… |
| 1.3.6.1.4.1.1166.1.31.10.1.4 | TableapexManRtePassThroughApplyTable | not-accessible | current | Table of Apply Change for the data for Manual Route Pass Through Table. A row in this table corresponds to the same row index in the Manual Route Pass Through … |
| 1.3.6.1.4.1.1166.1.31.10.1.4.1 | RowapexManRtePassThroughApplyEntry | not-accessible | current | Manual Route Apply Table Entry. |
| 1.3.6.1.4.1.1166.1.31.10.1.4.1.1 | ColumnapexManRtePassThroughApplyOutputTsNum | not-accessible | current | The index of the Manual Route Pass Through Apply Table. |
| 1.3.6.1.4.1.1166.1.31.10.1.4.1.2 | ColumnapexManRtePassThroughApplyChange | read-write | current | The Apply for the row of data in the Manual Route Pass Through Table. A row in this table corresponds to the same row index in the Manual Route Pass Through ta… |
| 1.3.6.1.4.1.1166.1.31.10.1.5 | TableapexManRtePassThroughTable | not-accessible | current | Table of data for Manual Route Pass Through. This table is used to pass through an entire input stream to an output stream. Once written, the change to a row t… |
| 1.3.6.1.4.1.1166.1.31.10.1.5.1 | RowapexManRtePassThroughEntry | not-accessible | current | Manual Route Pass Through Table Entry. |
| 1.3.6.1.4.1.1166.1.31.10.1.5.1.1 | ColumnapexManRtePassThroughOutputTsNum | not-accessible | current | The index of the Manual Route Pass Through Table. |
| 1.3.6.1.4.1.1166.1.31.10.1.5.1.2 | ColumnapexManRtePassThroughEnable | read-write | current | Indicates that this Manual Route Pass Through is enabled or disabled. An input stream can only be passed through to an output stream when there are no active s… |
| 1.3.6.1.4.1.1166.1.31.10.1.5.1.3 | ColumnapexManRtePassThroughInputType | read-write | current | Input Type of input from which to obtain data. |
| 1.3.6.1.4.1.1166.1.31.10.1.5.1.4 | ColumnapexManRtePassThroughInputInterface | read-write | current | Number of the input interface, of type configured by Input Type, from which to obtain data. Range: '0' = Not Applicable GBE = 1-4 FastEnet = 1-2 |
| 1.3.6.1.4.1.1166.1.31.10.1.5.1.5 | ColumnapexManRtePassThroughInputUdp | read-write | current | Input UDP Port from which to obtain data. Range: GBE = 0-65535 FastEnet = 1024-65535 |
| 1.3.6.1.4.1.1166.1.31.10.1.5.1.6 | ColumnapexManRtePassThroughInputMulticastIp | read-write | current | Input Multicast IP address from which to obtain data. An IP address of 0.0.0.0 indicates table entry not in use. Multicast IP addresses 224.0.0.0 to 224.0.0.25… |
| 1.3.6.1.4.1.1166.1.31.10.1.5.1.7 | ColumnapexManRtePassThroughInputSourceIp | read-write | current | Input IGMP v3 Source IP address from which to obtain data. If the router supports IGMP v3 the GBE will only receive data from this source IP. If Source IP is n… |
| 1.3.6.1.4.1.1166.1.31.10.1.6 | NodeapexManualRouteGbeInputRedundConfig | |||
| 1.3.6.1.4.1.1166.1.31.10.1.6.1 | NodeapexManRteGbeInRedConfigGeneral | |||
| 1.3.6.1.4.1.1166.1.31.10.1.6.2 | TableapexManRteGbeInRedApplyTable | not-accessible | current | Table of Apply Change for the data for Manual Route Table. A row in this table corresponds to the same row index in the Manual Route table. |
| 1.3.6.1.4.1.1166.1.31.10.1.6.2.1 | RowapexManRteGbeInRedApplyEntry | not-accessible | current | Manual Routing Gbe Input Ts Configuration Apply Table Entry. |
| 1.3.6.1.4.1.1166.1.31.10.1.6.2.1.1 | ColumnapexManRteGbeInRedApplyIndex | not-accessible | current | The index of the Manual Routing Gbe Input Ts Configuration Apply Table. |
| 1.3.6.1.4.1.1166.1.31.10.1.6.2.1.2 | ColumnapexManRteGbeInRedApplyChange | read-write | current | The Apply for the row of data in the Manual Routing Gbe Input Ts Configuration Table. A row in this table corresponds to the same row index in the Manual Routi… |
| 1.3.6.1.4.1.1166.1.31.10.1.6.3 | TableapexManRteGbeInRedTable | not-accessible | current | This table is the Manual Routing Gigabit Ethernet Input Transport Stream Configuration Table. This table contains 768 rows. For Force Switching a Redundancy pa… |
| 1.3.6.1.4.1.1166.1.31.10.1.6.3.1 | RowapexManRteGbeInRedEntry | not-accessible | current | Manual Routing Gigabit Ethernet Input Transport Stream Configuration Table Entry. |
| 1.3.6.1.4.1.1166.1.31.10.1.6.3.1.1 | ColumnapexManRteGbeInRedIndex | not-accessible | current | The Manual Routing Gbe Input Ts Configuration table index. |
| 1.3.6.1.4.1.1166.1.31.10.1.6.3.1.2 | ColumnapexManRteGbeInRedPriInterface | read-write | current | The primary Gigabit Ethernet Interface. Zero indicates this row of the table is not in use. |
| 1.3.6.1.4.1.1166.1.31.10.1.6.3.1.3 | ColumnapexManRteGbeInRedPriUdp | read-write | current | The primary Gigabit Ethernet Input UDP Port. |
| 1.3.6.1.4.1.1166.1.31.10.1.6.3.1.4 | ColumnapexManRteGbeInRedPriMulticastIp | read-write | current | The primary Multicast receive IP address. An IP address of 0.0.0.0 indicates table entry not in use. Multicast IP addresses 224.0.0.0 to 224.0.0.255 are reserv… |
| 1.3.6.1.4.1.1166.1.31.10.1.6.3.1.5 | ColumnapexManRteGbeInRedPriSourceIp | read-write | current | This is the IP address of the source device for the primary interface. If the router supports IGMP v3 the GBE will only receive data from this source IP. If So… |
| 1.3.6.1.4.1.1166.1.31.10.1.6.3.1.6 | ColumnapexManRteGbeInRedPriLowAlarmBitRate | read-write | current | This is the bit rate, in bits per second, below which the APEX will issue the apexAlarmGbeInputStreamLowBitRate alarm for the primary interface. The APEX will … |
| 1.3.6.1.4.1.1166.1.31.10.1.6.3.1.7 | ColumnapexManRteGbeInRedPriHighAlarmBitRate | read-write | current | This is the bit rate, in bits per second, above which the APEX will issue the apexAlarmGbeInputStreamHighBitRate alarm for the primary interface. The APEX will… |
| 1.3.6.1.4.1.1166.1.31.10.1.6.3.1.8 | ColumnapexManRteGbeInRedRateCompareType | read-write | current | This is the rate to use for comparing input streams. It is either Information rate or Stream rate. This applies to monitoring for Bit Rate alarming and monitor… |
| 1.3.6.1.4.1.1166.1.31.10.1.6.3.1.9 | ColumnapexManRteGbeInRedEnable | read-write | current | This entry is used to enable Redundancy. |
| 1.3.6.1.4.1.1166.1.31.10.1.6.3.1.10 | ColumnapexManRteGbeInRedThreshold | read-write | current | Manual Routing Gigabit Ethernet Redundancy Threshold. This is the percent used to determine Fail Over from Primary to Secondary, and Switch Back from Secondary… |
| 1.3.6.1.4.1.1166.1.31.10.1.6.3.1.11 | ColumnapexManRteGbeInRedSuspend | read-write | current | This suspends Redundant Pair switching when set to 'suspended'. This has no effect when redundancy is disabled. Forced switching of Redundant Pairs is not prev… |
| 1.3.6.1.4.1.1166.1.31.10.1.6.3.1.12 | ColumnapexManRteGbeInRedSecInterface | read-write | current | The secondary Gigabit Ethernet Interface for redundancy. Zero is invalid when redundancy is enabled. |
| 1.3.6.1.4.1.1166.1.31.10.1.6.3.1.13 | ColumnapexManRteGbeInRedSecUdp | read-write | current | The secondary Gigabit Ethernet Input UDP Port for redundancy. |
| 1.3.6.1.4.1.1166.1.31.10.1.6.3.1.14 | ColumnapexManRteGbeInRedSecMulticastIp | read-write | current | The secondary Multicast receive IP address for redundancy. An IP address of 0.0.0.0 indicates singlecast only. Multicast IP addresses 224.0.0.0 to 224.0.0.255 … |
| 1.3.6.1.4.1.1166.1.31.10.1.6.3.1.15 | ColumnapexManRteGbeInRedSecSourceIp | read-write | current | This is the IP address of the source device for the secondary interface. If the router supports IGMP v3 the GBE will only receive data from this source IP. If … |
| 1.3.6.1.4.1.1166.1.31.10.1.6.3.1.16 | ColumnapexManRteGbeInRedSecLowAlarmBitRate | read-write | current | This is the bit rate, in bits per second, below which the APEX will issue the apexAlarmGbeInputStreamLowBitRate alarm for the secondary interface. The APEX wil… |
| 1.3.6.1.4.1.1166.1.31.10.1.6.3.1.17 | ColumnapexManRteGbeInRedSecHighAlarmBitRate | read-write | current | This is the bit rate, in bits per second, above which the APEX will issue the apexAlarmGbeInputStreamHighBitRate alarm for the secondary interface. The APEX wi… |
| 1.3.6.1.4.1.1166.1.31.10.1.6.3.1.18 | ColumnapexManRteGbeInRedSecRedundMcJoin | read-write | current | This is not currently supported and is reserved for future use. |
| 1.3.6.1.4.1.1166.1.31.10.1.6.4 | TableapexManRteGbeInRedForceSwitchTable | not-accessible | current | This table is the Manual Routing Gigabit Ethernet Input Transport Stream Redundancy Configuration Table. This table contains 768 rows. A row in this table corr… |
| 1.3.6.1.4.1.1166.1.31.10.1.6.4.1 | RowapexManRteGbeInRedForceSwitchEntry | not-accessible | current | Gigabit Ethernet Input Stream Redundancy Configuration Table Entry. |
| 1.3.6.1.4.1.1166.1.31.10.1.6.4.1.1 | ColumnapexManRteGbeInRedForceSwitchIndex | not-accessible | current | The Manual Routing Gbe Input Ts Redundancy Configuration table index. A row in this table corresponds to the same index in the apexManRteGbeInRedTable. |
| 1.3.6.1.4.1.1166.1.31.10.1.6.4.1.2 | ColumnapexManRteGbeInRedForceSwitch | read-write | current | The Gigabit Ethernet Redundant Pair force switch. This will have no effect if the corresponding row setting of apexManRteGbeInRedEnable is 'disabled'. The corr… |
| 1.3.6.1.4.1.1166.1.31.10.2 | NodeapexManualRoutingStatus | |||
| 1.3.6.1.4.1.1166.1.31.10.2.1 | NodeapexManualRoutingStatusGeneral | |||
| 1.3.6.1.4.1.1166.1.31.10.2.1.1 | ScalarapexManualRouteInvalidApplyText | read-only | current | When apexManualRouteApplyChange is set to applyNotInProgressInvalidData this entry may contain a text description of what was wrong with the data. This entry c… |
| 1.3.6.1.4.1.1166.1.31.10.2.1.2 | ScalarapexManRtePassThroughInvalidApplyText | read-only | current | When apexManRtePassThroughApplyChange is set to applyNotInProgressInvalidData this entry may contain a text description of what was wrong with the data. This e… |
| 1.3.6.1.4.1.1166.1.31.10.2.1.3 | ScalarapexManRteGbeInRedInvalidApplyText | read-only | current | When apexManRteGbeInRedTableApplyChange is set to applyNotInProgressInvalidData this entry may contain a text description of what was wrong with the data. This… |
| 1.3.6.1.4.1.1166.1.31.10.2.2 | NodeapexManualRouteGbeInputRedundStatus | |||
| 1.3.6.1.4.1.1166.1.31.10.2.2.1 | NodeapexManRteGbeInRedStatusGeneral | |||
| 1.3.6.1.4.1.1166.1.31.10.2.2.2 | TableapexManRteGbeInRedStatusMapTable | not-accessible | current | This table provides the mapping between the indexes in Manual Routing Gigabit Ethernet Input Transport Stream Redundancy Configuration and Input TS Status. Thi… |
| 1.3.6.1.4.1.1166.1.31.10.2.2.2.1 | RowapexManRteGbeInRedStatusMapEntry | not-accessible | current | Gigabit Ethernet Input Stream Redundancy Configuration and Status Mapping Table Entry. |
| 1.3.6.1.4.1.1166.1.31.10.2.2.2.1.1 | ColumnapexManRteGbeInRedStatusMapIndex | not-accessible | current | The Manual Routing Gbe Input Ts Redundancy Configuration and status mapping table index. A index in this table corresponds to the same index in the apexManRteG… |
| 1.3.6.1.4.1.1166.1.31.10.2.2.2.1.2 | ColumnapexManRteGbeInRedStatusMapInputTsStatRow | read-only | current | The Manual Routing Gbe Input TS Status index. This provides the mapping between the entries in apexManRteGbeInRedTable and apexInputTsStatTable. The range of t… |
| 1.3.6.1.4.1.1166.1.31.10.2.3 | NodeapexManualRoutingServiceStatus | |||
| 1.3.6.1.4.1.1166.1.31.10.2.3.1 | NodeapexManualRoutingServiceStatusGeneral | |||
| 1.3.6.1.4.1.1166.1.31.10.2.3.2 | TableapexManualRoutingServiceStatusTable | not-accessible | current | This table provides the error status for manual routed service routing. For each routing in manual routing table, the corresponding entry in this table gives t… |
| 1.3.6.1.4.1.1166.1.31.10.2.3.2.1 | RowapexManualRoutingServiceStatusEntry | not-accessible | current | Manual routing service status table entry. |
| 1.3.6.1.4.1.1166.1.31.10.2.3.2.1.1 | ColumnapexManualRoutingServiceStatusIndex | not-accessible | current | Manual Routing Service Status Index. This index in this table corresponds to the same index in the apexManualRouteTable. |
| 1.3.6.1.4.1.1166.1.31.10.2.3.2.1.2 | ColumnapexManualRoutingServiceErrorStatus | read-only | current | Program service error for the service routed in manual routing table. The entry in this table corresponds to the same index entry in the apexManualRouteTable. |
| 1.3.6.1.4.1.1166.1.31.11 | NodeapexAncillaryPidMapping | |||
| 1.3.6.1.4.1.1166.1.31.11.1 | NodeapexPidMapConfig | |||
| 1.3.6.1.4.1.1166.1.31.11.1.1 | TableapexPidMapTable | not-accessible | current | Table of data for Ancillary Pid Mapping. There are 480 rows in this table (APEX supports up to 480 ancillary PID mappings). Once written, the change to this ta… |
| 1.3.6.1.4.1.1166.1.31.11.1.1.1 | RowapexPidMapEntry | not-accessible | current | Pid Mapping Table Entry. |
| 1.3.6.1.4.1.1166.1.31.11.1.1.1.1 | ColumnapexPidMapIndex | not-accessible | current | Index of Pid Mapping Table. |
| 1.3.6.1.4.1.1166.1.31.11.1.1.1.2 | ColumnapexPidMapEnable | read-write | current | Indicates whether this PID Mapping is enabled or disabled. |
| 1.3.6.1.4.1.1166.1.31.11.1.1.1.3 | ColumnapexPidMapInputType | read-write | current | Input Type of input from which to obtain data. |
| 1.3.6.1.4.1.1166.1.31.11.1.1.1.4 | ColumnapexPidMapInputInterface | read-write | current | Number of the input, of type configured by Input Type, from which to obtain data. Range: '0' = Not Applicable GBE = 1-4 FastEnet = 1-2 |
| 1.3.6.1.4.1.1166.1.31.11.1.1.1.5 | ColumnapexPidMapInputUdp | read-write | current | Input UDP Port from which to obtain data. Range: GBE = 0-65535 FastEnet = 1024-65535 |
| 1.3.6.1.4.1.1166.1.31.11.1.1.1.6 | ColumnapexPidMapInputMulticastIp | read-write | current | The Multicast receive IP address on which to receive data. An IP address of 0.0.0.0 indicates singlecast only. Multicast IP addresses 224.0.0.0 to 224.0.0.255 … |
| 1.3.6.1.4.1.1166.1.31.11.1.1.1.7 | ColumnapexPidMapInputSourceIp | read-write | current | This is the IP address of the source device. If the router supports IGMP v3 the GBE will only receive data from this source IP. If Source IP is not specified o… |
| 1.3.6.1.4.1.1166.1.31.11.1.1.1.8 | ColumnapexPidMapInputPid | read-write | current | Input MPEG PID to multiplex. When PID Remapping for an output is enabled, the input PID value and output PID value can be different. When PID Remapping for an … |
| 1.3.6.1.4.1.1166.1.31.11.1.1.1.9 | ColumnapexPidMapOutputTsNum | read-write | current | Output Transport Stream Number of the output on which to place data. Zero is only valid if the apexPidMapTable entry is not being used. |
| 1.3.6.1.4.1.1166.1.31.11.1.1.1.10 | ColumnapexPidMapOutputPid | read-write | current | Output PID to use for the data. This output PID value must match the input PID value when PID Remapping for the output stream is disabled. Zero is only valid i… |
| 1.3.6.1.4.1.1166.1.31.11.1.2 | TableapexPidMapApplyTable | not-accessible | current | Table of Apply Change for the data for PID Map Table. A row in this table corresponds to the same row index in the PID Map table. |
| 1.3.6.1.4.1.1166.1.31.11.1.2.1 | RowapexPidMapApplyEntry | not-accessible | current | PID Map Apply Table Entry. |
| 1.3.6.1.4.1.1166.1.31.11.1.2.1.1 | ColumnapexPidMapApplyIndex | not-accessible | current | The index of the PID Map Apply Table. |
| 1.3.6.1.4.1.1166.1.31.11.1.2.1.2 | ColumnapexPidMapApplyChange | read-write | current | The Apply for the row of data in the PID Map Table. A row in this table corresponds to the same row index in the PID Map table. This parameter MUST be set to '… |
| 1.3.6.1.4.1.1166.1.31.11.1.3 | TableapexBulkPidMapTable | not-accessible | current | Table of data for Ancillary Bulk Pid Mapping. Apex supports 480 ancillary PID map routings. There are 480 rows in this table which allows user to configure upt… |
| 1.3.6.1.4.1.1166.1.31.11.1.3.1 | RowapexBulkPidMapEntry | not-accessible | current | Bulk Pid Mapping Table Entry. |
| 1.3.6.1.4.1.1166.1.31.11.1.3.1.1 | ColumnapexBulkPidMapIndex | not-accessible | current | Index of Bulk Pid Mapping Table. This index maps with apexBulkPidMapApplyIndex Also, defines this table row size |
| 1.3.6.1.4.1.1166.1.31.11.1.3.1.2 | ColumnapexBulkPidMapEnable | read-write | current | Indicates whether this Bulk PID Mapping entry is enabled or disabled. |
| 1.3.6.1.4.1.1166.1.31.11.1.3.1.3 | ColumnapexBulkPidMapInputType | read-write | current | Input Type. Indicates if mapping is from gigabit ethernet or fast ethernet |
| 1.3.6.1.4.1.1166.1.31.11.1.3.1.4 | ColumnapexBulkPidMapInputInterface | read-write | current | Number of the input, of type configured by Input Type, from which to obtain data. Range: '0' = Not Applicable GBE = 1-4 FastEnet = 1-2 |
| 1.3.6.1.4.1.1166.1.31.11.1.3.1.5 | ColumnapexBulkPidMapInputUdp | read-write | current | Input UDP Port from which to obtain data. Range: GBE = 0-65535 FastEnet = 1024-65535 |
| 1.3.6.1.4.1.1166.1.31.11.1.3.1.6 | ColumnapexBulkPidMapInputMulticastIp | read-write | current | The Multicast receive IP address on which to receive data. An IP address of 0.0.0.0 indicates singlecast only. Multicast IP addresses 224.0.0.0 to 224.0.0.255 … |
| 1.3.6.1.4.1.1166.1.31.11.1.3.1.7 | ColumnapexBulkPidMapInputSourceIp | read-write | current | This is the IP address of the source device. If the router supports IGMP v3 the GBE will only receive data from this source IP. If Source IP is not specified o… |
| 1.3.6.1.4.1.1166.1.31.11.1.3.1.8 | ColumnapexBulkPidMapInputPid | read-write | current | Input MPEG PID to multiplex. When PID Remapping for an output is enabled, the input PID value and output PID value can be different. When PID Remapping for an … |
| 1.3.6.1.4.1.1166.1.31.11.1.3.1.9 | ColumnapexBulkPidMapOutputTsNum01to32 | read-write | current | Bitfield for inserting PID streams into OTS 1 through 32 where: bit 0(lsb) = OTS 1, bit 31(msb) = OTS 32. If the bit for the OTS is set, then the current PID i… |
| 1.3.6.1.4.1.1166.1.31.11.1.3.1.10 | ColumnapexBulkPidMapOutputTsNum33to48 | read-write | current | Bitfield for inserting PID streams into OTS 33 through 48 where: bit 0(lsb) = OTS 33, bit 15 = OTS 48. If the bit for the OTS is set, then the current PID is i… |
| 1.3.6.1.4.1.1166.1.31.11.1.3.1.11 | ColumnapexBulkPidMapOutputPid | read-write | current | Output PID to use for the data. This output PID value must match the input PID value when PID Remapping for the output stream is disabled. Zero is only valid i… |
| 1.3.6.1.4.1.1166.1.31.11.1.4 | TableapexBulkPidMapApplyTable | not-accessible | current | Table of Apply Change for the data for Bulk PID Map Table (apexBulkPidMapTable). A row in this table corresponds to the same row index in the Bulk PID Map tabl… |
| 1.3.6.1.4.1.1166.1.31.11.1.4.1 | RowapexBulkPidMapApplyEntry | not-accessible | current | Bulk PID Map Apply Table Entry. |
| 1.3.6.1.4.1.1166.1.31.11.1.4.1.1 | ColumnapexBulkPidMapApplyIndex | not-accessible | current | The index of the bulk PID map Apply Table. A row in this table corresponds to the same row index in the entry in bulk PID map table. |
| 1.3.6.1.4.1.1166.1.31.11.1.4.1.2 | ColumnapexBulkPidMapApplyChange | read-write | current | The Apply for the row of data in the Bulk PID Map Table. A row in this table corresponds to the same row index in the Bulk PID Map table. This paramter MUST be… |
| 1.3.6.1.4.1.1166.1.31.11.1.5 | NodeapexPidMapConfigGeneral | |||
| 1.3.6.1.4.1.1166.1.31.11.1.5.1 | ScalarapexPidMapConfigApplyChange | read-write | current | This paramter MUST be set to 'apply' in order for any of the data in apexPidMapConfigBulkPidEnable to effect. If enabled, host deletes the pid mappings created… |
| 1.3.6.1.4.1.1166.1.31.11.1.5.2 | ScalarapexPidMapConfigBulkPidEnable | read-write | current | When enabled, this parameter indicates the host to route ancillary PIDs based on apexBulkPidMapTable. When disabled, this parameter indicates the host to route… |
| 1.3.6.1.4.1.1166.1.31.11.1.6 | NodeapexPidMapInputAncillaryPidDetection | |||
| 1.3.6.1.4.1.1166.1.31.11.1.6.1 | ScalarapexPidMapInputAncillaryPidDetectionTimeout | read-write | current | The loss of input ancillary PID detection timeout value in minutes. The APEX will monitor for the configured number of minutes to check whether atleast one TS … |
| 1.3.6.1.4.1.1166.1.31.11.2 | NodeapexPidMapStatus | |||
| 1.3.6.1.4.1.1166.1.31.11.2.1 | NodeapexPidMapStatusGeneral | |||
| 1.3.6.1.4.1.1166.1.31.11.2.1.1 | ScalarapexPidMapMaxPidMappings | read-only | current | Maximum number of Ancillary PID mappings supported. |
| 1.3.6.1.4.1.1166.1.31.11.2.1.3 | ScalarapexPidMapInvalidApplyText | read-only | current | When apexPidMapApplyChange is set to applyNotInProgressInvalidData this entry may contain a text description of what was wrong with the data. This entry contai… |
| 1.3.6.1.4.1.1166.1.31.11.2.2 | NodeapexBulkPidMapStatusGeneral | |||
| 1.3.6.1.4.1.1166.1.31.11.2.2.1 | ScalarapexBulkPidMapInvalidApplyText | read-only | current | When apexBulkPidMapApplyChange is set to applyNotInProgressInvalidData this entry may contain a text description of what was wrong with the data. This entry co… |
| 1.3.6.1.4.1.1166.1.31.12 | NodeapexInsertion | |||
| 1.3.6.1.4.1.1166.1.31.12.1 | NodeapexInsertionConfig | |||
| 1.3.6.1.4.1.1166.1.31.12.1.1 | NodeapexInsertionConfigGeneral | |||
| 1.3.6.1.4.1.1166.1.31.12.1.1.1 | ScalarapexInsertionMode | read-write | current | This parameter is used to set the insertion mode for the APEX. The APEX may be configured to insert messages as efficiently as possible (efficient) or restrict… |
| 1.3.6.1.4.1.1166.1.31.12.2 | NodeapexInsertionStatus | |||
| 1.3.6.1.4.1.1166.1.31.12.2.1 | NodeapexInsertionStatusGeneral | |||
| 1.3.6.1.4.1.1166.1.31.12.2.2 | TableapexInsertPacketStatisticsTable | not-accessible | current | Table of Output Transport Stream Insert Packet Statistics. Indexed by Output Transport Stream number. |
| 1.3.6.1.4.1.1166.1.31.12.2.2.1 | RowapexInsertPacketStatisticsEntry | not-accessible | current | A row in the Output Transport Stream Insert Packet Statistics table. |
| 1.3.6.1.4.1.1166.1.31.12.2.2.1.1 | ColumnapexInsertPacketStatOutputTsNum | not-accessible | current | Output Transport Stream Number. |
| 1.3.6.1.4.1.1166.1.31.12.2.2.1.2 | ColumnapexInsertPacketStatTotPkts | read-only | current | Total number of packets inserted. |
| 1.3.6.1.4.1.1166.1.31.12.2.2.1.3 | ColumnapexInsertPacketStatNumPkts | read-only | current | Number of packets inserted during the last monitoring period (currently 5 seconds). |
| 1.3.6.1.4.1.1166.1.31.13 | NodeapexInputTransport | |||
| 1.3.6.1.4.1.1166.1.31.13.1 | NodeapexInputTsConfig | |||
| 1.3.6.1.4.1.1166.1.31.13.1.1 | NodeapexInputTsConfigGeneral | |||
| 1.3.6.1.4.1.1166.1.31.13.2 | NodeapexInputTsStatus | |||
| 1.3.6.1.4.1.1166.1.31.13.2.1 | NodeapexInputTsStatusGeneral | |||
| 1.3.6.1.4.1.1166.1.31.13.2.2 | TableapexInputTsStatTable | not-accessible | current | Table of Input Transport Stream Status data. For each input stream in use, an entry in this row will be utilized. This table will indicate the input stream in … |
| 1.3.6.1.4.1.1166.1.31.13.2.2.1 | RowapexInputTsStatEntry | not-accessible | current | Input Transport Stream Status Table Entry. |
| 1.3.6.1.4.1.1166.1.31.13.2.2.1.1 | ColumnapexInputTsStatIndex | not-accessible | current | Index of Input Transport Stream Status Table. |
| 1.3.6.1.4.1.1166.1.31.13.2.2.1.2 | ColumnapexInputTsStatStreamInUse | read-only | current | Indicates whether the primary or secondary is in use. Zero indicates this row is not in use. |
| 1.3.6.1.4.1.1166.1.31.13.2.2.1.3 | ColumnapexInputTsStatInputType | read-only | current | Input Type of both primary and secondary inputs. |
| 1.3.6.1.4.1.1166.1.31.13.2.2.1.4 | ColumnapexInputTsStatRoutingType | read-only | current | Routing Type of both primary and secondary inputs. 'session' - applies to SDV session routes (RPC, RTSP). 'manual' - applies to all manual routes (Manual Routi… |
| 1.3.6.1.4.1.1166.1.31.13.2.2.1.5 | ColumnapexInputTsStatPriState | read-only | current | The current state of the primary Gigabit Ethernet Input TS configured in apexManRteGbeInRedTable. States are: closed (0) - Input TS is closed or table row is n… |
| 1.3.6.1.4.1.1166.1.31.13.2.2.1.6 | ColumnapexInputTsStatPriInputInterface | read-only | current | Number of the primary input interface of type Input Type. |
| 1.3.6.1.4.1.1166.1.31.13.2.2.1.7 | ColumnapexInputTsStatPriInputUdp | read-only | current | Input UDP Port for primary input. |
| 1.3.6.1.4.1.1166.1.31.13.2.2.1.8 | ColumnapexInputTsStatPriInputMulticastIp | read-only | current | The Multicast receive IP address for primary input. |
| 1.3.6.1.4.1.1166.1.31.13.2.2.1.9 | ColumnapexInputTsStatPriInputSourceIp | read-only | current | This is the IGMP v3 Source IP address of the source device for the primary input. |
| 1.3.6.1.4.1.1166.1.31.13.2.2.1.10 | ColumnapexInputTsStatSecState | read-only | current | The current state of the secondary Gigabit Ethernet Input TS configured in apexManRteGbeInRedTable. States are: closed (0) - Input TS is closed or table row is… |
| 1.3.6.1.4.1.1166.1.31.13.2.2.1.11 | ColumnapexInputTsStatSecInputInterface | read-only | current | Number of the secondary input interface of type Input Type. |
| 1.3.6.1.4.1.1166.1.31.13.2.2.1.12 | ColumnapexInputTsStatSecInputUdp | read-only | current | Input UDP Port for secondary input. |
| 1.3.6.1.4.1.1166.1.31.13.2.2.1.13 | ColumnapexInputTsStatSecInputMulticastIp | read-only | current | The Multicast receive IP address for secondary input. |
| 1.3.6.1.4.1.1166.1.31.13.2.2.1.14 | ColumnapexInputTsStatSecInputSourceIp | read-only | current | This is the IGMP v3 Source IP address of the source device for the secondary input. |
| 1.3.6.1.4.1.1166.1.31.13.2.2.1.15 | ColumnapexInputTsStatRateCompareType | read-only | current | This is the rate in use for comparing input streams. It is either Information rate or Stream rate. This applies to monitoring for Bit Rate alarming and monitor… |
| 1.3.6.1.4.1.1166.1.31.14 | NodeapexOutputTransport | |||
| 1.3.6.1.4.1.1166.1.31.14.1 | NodeapexOutputTsConfig | |||
| 1.3.6.1.4.1.1166.1.31.14.1.1 | NodeapexOutputTsConfigGeneral | |||
| 1.3.6.1.4.1.1166.1.31.14.1.4 | NodeapexOutputTsUtilizationMonitoring | |||
| 1.3.6.1.4.1.1166.1.31.14.1.4.1 | NodeapexOutputTsUtilizationMonitorGeneral | |||
| 1.3.6.1.4.1.1166.1.31.14.1.4.1.1 | ScalarapexOutputTsUtilMonAlarmThreshold | read-write | current | The threshold, in percent, used to produce the apexAlarmOutputUtilizationFault alarm 'minor' while monitoring Output Transport Stream Bandwidth Utilization. An… |
| 1.3.6.1.4.1.1166.1.31.14.1.4.1.2 | ScalarapexOutputTsUtilMonSetAlarmDelay | read-write | current | This is the time in seconds that the Output Transport Stream must be at or exceeding apexOutputTsUtilMonAlarmThreshold before setting the apexAlarmOutputUtiliz… |
| 1.3.6.1.4.1.1166.1.31.14.1.4.1.3 | ScalarapexOutputTsUtilMonClearAlarmDelay | read-write | current | This is the time in seconds that the Output Transport Stream must be below apexOutputTsUtilMonAlarmThreshold before clearing the apexAlarmOutputUtilizationFaul… |
| 1.3.6.1.4.1.1166.1.31.14.1.4.2 | TableapexOutputTsUtilizationMonitorTable | not-accessible | current | This is a table of configuration parameters for Rate Monitoring of the Output Transport Stream Bandwidth Utilization. Utilization information is accessed via a… |
| 1.3.6.1.4.1.1166.1.31.14.1.4.2.1 | RowapexOutputTsUtilizationMonitorEntry | not-accessible | current | Output Transport Rate Monitoring Configuration Table Entry. |
| 1.3.6.1.4.1.1166.1.31.14.1.4.2.1.1 | ColumnapexOutputTsUtilMonOutputTsNum | not-accessible | current | Output Transport Stream Number. |
| 1.3.6.1.4.1.1166.1.31.14.1.4.2.1.2 | ColumnapexOutputTsUtilMonResetTotDropPacket | read-write | current | Output Ts Reset total dropped packets. Setting to 'reset' resets same apexOutputTsUtilizTotalDropPackets index row in apexOutputTsUtilizationTable. Once writte… |
| 1.3.6.1.4.1.1166.1.31.14.1.5 | TableapexOutputTsConfApplyTable | not-accessible | current | Table of Apply Change for Output Ts Config Table. This apply is only used for apexOutputTsConfOperatingMode, apexOutputTsConfEncryptionType, and apexOutputTsCo… |
| 1.3.6.1.4.1.1166.1.31.14.1.5.1 | RowapexOutputTsConfApplyEntry | not-accessible | current | Output Transport Stream Apply Table Entry. |
| 1.3.6.1.4.1.1166.1.31.14.1.5.1.1 | ColumnapexOutputTsConfApplyIndex | not-accessible | current | Index of Output Transport Stream Apply Table. |
| 1.3.6.1.4.1.1166.1.31.14.1.5.1.2 | ColumnapexOutputTsConfApplyChange | read-write | current | The apply for Output Ts Config Table. This apply is only used for apexOutputTsConfOperatingMode, apexOutputTsConfEncryptionType, and apexOutputTsConfSimulcrypt… |
| 1.3.6.1.4.1.1166.1.31.14.1.6 | TableapexOutputTsConfigTable | not-accessible | current | This is a table of configuration parameters for Output Transport Streams. Once written, a change to apexOutputTsConfEncryptionType, apexOutputTsConfOperatingMo… |
| 1.3.6.1.4.1.1166.1.31.14.1.6.1 | RowapexOutputTsConfigEntry | not-accessible | current | Output Transport Stream Configuration Table Entry. |
| 1.3.6.1.4.1.1166.1.31.14.1.6.1.1 | ColumnapexOutputTsConfOutputTsNum | not-accessible | current | Output Transport Stream Number. |
| 1.3.6.1.4.1.1166.1.31.14.1.6.1.2 | ColumnapexOutputTsConfPidRemappingMode | read-write | current | The PID Remapping mode setting. When 'disabled', the output PIDs for all services and ancillary PIDs are the same as the input PID values. This scheme can only… |
| 1.3.6.1.4.1.1166.1.31.14.1.6.1.3 | ColumnapexOutputTsConfOperatingMode | read-write | current | This parameter is used to set the operating mode of the output. Operating mode changes can only occur when the output is not in use (no service, PID, or stream… |
| 1.3.6.1.4.1.1166.1.31.14.1.6.1.4 | ColumnapexOutputTsConfOutPatTsId | read-write | current | Output Transport Stream ID to use for the output PAT in this Output Transport Stream. Changes to the output PAT TS ID can be made at any time and will cause th… |
| 1.3.6.1.4.1.1166.1.31.14.1.6.1.5 | ColumnapexOutputTsConfPsipEnable | read-write | current | This parameter indicates that PSIP is enabled for the Output Transport Stream. |
| 1.3.6.1.4.1.1166.1.31.14.1.6.1.6 | ColumnapexOutputTsConfEncryptionType | read-write | current | This parameter is used to set the encryption type of the output. 'noEncryption' - All services are output in the clear 'cte' - Services on output use Common Ti… |
| 1.3.6.1.4.1.1166.1.31.14.1.6.1.7 | ColumnapexOutputTsConfSimulcryptMode | read-write | current | This parameter is used to set the Simulcrypt mode of the output. The actual behavior is disable/enable (none/externalEIS). It can be set to externalEIS if: - T… |
| 1.3.6.1.4.1.1166.1.31.14.1.6.1.8 | ColumnapexOutputTsConfPcrLess | read-write | current | This parameter indicates that PCR-less is enabled for the Output Transport Stream. |
| 1.3.6.1.4.1.1166.1.31.14.1.6.1.9 | ColumnapexOutputTsConfAutoSDTEnable | read-write | current | This parameter enables/disables the Auto SDT mapping feature for the Output Transport Stream. |
| 1.3.6.1.4.1.1166.1.31.14.2 | NodeapexOutputTsStatus | |||
| 1.3.6.1.4.1.1166.1.31.14.2.1 | NodeapexOutputTsStatusGeneral | |||
| 1.3.6.1.4.1.1166.1.31.14.2.1.1 | ScalarapexOutputTsStatusInvalidApplyText | read-only | current | When apexOutputTsConfApplyChange is set to 'applyNotInProgressInvalidData' this entry may contain a text description of what was wrong with the data. This entr… |
| 1.3.6.1.4.1.1166.1.31.14.2.2 | NodeapexOutputTsUtilization | |||
| 1.3.6.1.4.1.1166.1.31.14.2.2.1 | NodeapexOutputTsUtilizationGeneral | |||
| 1.3.6.1.4.1.1166.1.31.14.2.2.1.1 | ScalarapexOutputTsUtilizationSamplePeriod | read-only | current | Sample Period for Output Transport Stream Bandwidth Utilization Rate Monitoring. This parameter indicates the length of time in milliseconds the stream is moni… |
| 1.3.6.1.4.1.1166.1.31.14.2.2.2 | TableapexOutputTsUtilizationTable | not-accessible | current | This is a table of status parameters containing bandwidth utilization for Output Transport Streams. The sampling interval is up to fifteen minutes. There is a … |
| 1.3.6.1.4.1.1166.1.31.14.2.2.2.1 | RowapexOutputTsUtilizationEntry | not-accessible | current | Output Transport Stream Bandwidth Utilization Table Entry. |
| 1.3.6.1.4.1.1166.1.31.14.2.2.2.1.1 | ColumnapexOutputTsUtilizOutpuTsNum | not-accessible | current | Output Transport Stream Number. |
| 1.3.6.1.4.1.1166.1.31.14.2.2.2.1.2 | ColumnapexOutputTsUtilizDataFlag | read-only | current | Flag to indicate whether the Output Transport Stream was monitored a full fifteen minute sampling interval and a complete set of samples was obtained. 'samplin… |
| 1.3.6.1.4.1.1166.1.31.14.2.2.2.1.3 | ColumnapexOutputTsUtilizNumSamples | read-only | current | Number of samples included in the data. This can be used with apexOutputTsUtilizationSamplePeriod to determine the amount of time or percent of time the stream… |
| 1.3.6.1.4.1.1166.1.31.14.2.2.2.1.4 | ColumnapexOutputTsUtilizThreshold | read-only | current | Indicates whether there is a utilization error has occurred. The error occurs when Output Utilization Alarm Threshold has been reached for Output Utilization S… |
| 1.3.6.1.4.1.1166.1.31.14.2.2.2.1.5 | ColumnapexOutputTsUtilizTime | read-only | current | Time in GPS seconds (apexSystemTime) that this table row was saved. When GPS time is not available to the apex (apexSystemTime=0) a clock maintained inside the… |
| 1.3.6.1.4.1.1166.1.31.14.2.2.2.1.6 | ColumnapexOutputTsUtilizCurPercent | read-only | current | Percent utilization of most recently taken sample. |
| 1.3.6.1.4.1.1166.1.31.14.2.2.2.1.7 | ColumnapexOutputTsUtilizAvgPercent | read-only | current | Average percent utilization over the rolling sampling interval. |
| 1.3.6.1.4.1.1166.1.31.14.2.2.2.1.8 | ColumnapexOutputTsUtilizMinPercent | read-only | current | Minimum percent utilization for a sample during the rolling sampling interval. |
| 1.3.6.1.4.1.1166.1.31.14.2.2.2.1.9 | ColumnapexOutputTsUtilizPeakPercent | read-only | current | Peak percent utilization for a sample during the rolling sampling interval. |
| 1.3.6.1.4.1.1166.1.31.14.2.2.2.1.10 | ColumnapexOutputTsUtilizCurRate | read-only | current | Utilization of most recently taken sample in bits per second (bps). |
| 1.3.6.1.4.1.1166.1.31.14.2.2.2.1.11 | ColumnapexOutputTsUtilizAvgRate | read-only | current | Average utilization for the rolling sampling interval in bits per second (bps). |
| 1.3.6.1.4.1.1166.1.31.14.2.2.2.1.12 | ColumnapexOutputTsUtilizMinRate | read-only | current | Minimum utilization for a sample during this sampling interval in bits per second (bps). |
| 1.3.6.1.4.1.1166.1.31.14.2.2.2.1.13 | ColumnapexOutputTsUtilizPeakRate | read-only | current | Peak utilization for a sample during the rolling sampling interval in bits per second (bps). |
| 1.3.6.1.4.1.1166.1.31.14.2.2.2.1.14 | ColumnapexOutputTsUtilizOverflow | read-only | current | Indicates whether an overflow error has occurred. This field will clear if the output has no overflows. This field is also cleared when the QAM output is disab… |
| 1.3.6.1.4.1.1166.1.31.14.2.2.2.1.15 | ColumnapexOutputTsUtilizCurDropPackets | read-only | current | MPEG packets dropped during the most recently taken sample. |
| 1.3.6.1.4.1.1166.1.31.14.2.2.2.1.16 | ColumnapexOutputTsUtilizPeakDropPackets | read-only | current | Peak MPEG packets dropped for a sample during the rolling sampling interval. |
| 1.3.6.1.4.1.1166.1.31.14.2.2.2.1.17 | ColumnapexOutputTsUtilizRollingDropPackets | read-only | current | Total MPEG packets dropped during the rolling sampling interval. |
| 1.3.6.1.4.1.1166.1.31.14.2.2.2.1.18 | ColumnapexOutputTsUtilizTotalDropPackets | read-only | current | Total MPEG packets dropped on the QAM Output. Can be reset using apexOutputTsUtilMonResetTotDropPacket. |
| 1.3.6.1.4.1.1166.1.31.14.2.2.2.1.19 | ColumnapexOutputTsUtilizThresholdAlarm | read-only | current | Current fault condition of apexOutputTsUtilizThreshold. This is the apexAlarmOutputUtilizationFault level for this output. |
| 1.3.6.1.4.1.1166.1.31.14.2.2.2.1.20 | ColumnapexOutputTsUtilizOverflowAlarm | read-only | current | Current fault condition of apexOutputTsUtilizOverflow. This is the apexAlarmOutputOverflow level for this output. |
| 1.3.6.1.4.1.1166.1.31.14.2.5 | TableapexOutputTsStatusTable | not-accessible | current | Table of Output Transport Status. Indexed by Output Transport Stream number. |
| 1.3.6.1.4.1.1166.1.31.14.2.5.1 | RowapexOutputTsStatusEntry | not-accessible | current | A row in the Output Transport Stream Status table. |
| 1.3.6.1.4.1.1166.1.31.14.2.5.1.1 | ColumnapexOutputTsStatusOutputTsNum | not-accessible | current | Output Transport Stream Number. |
| 1.3.6.1.4.1.1166.1.31.14.2.5.1.2 | ColumnapexOutputTsStatusProgramsPerTs | read-only | current | Number of Output Programs supported on this Output Transport Stream. |
| 1.3.6.1.4.1.1166.1.31.14.2.5.1.3 | ColumnapexOutputTsStatusServicesMapped | read-only | current | Number of services currently mapped to the output. |
| 1.3.6.1.4.1.1166.1.31.14.2.5.1.4 | ColumnapexOutputTsStatusAncillaryPidsMapped | read-only | current | Number of ancillary PIDs currently mapped to the output. |
| 1.3.6.1.4.1.1166.1.31.14.2.5.1.5 | ColumnapexOutputTsStatusInputStreamsMapped | read-only | current | Number of input streams currently mapped to the output. |
| 1.3.6.1.4.1.1166.1.31.14.2.5.1.6 | ColumnapexOutputTsStatusFault | read-only | current | Highest current fault condition associated with this Output Transport Stream. The following Alarms are included: - apexAlarmOutputOverflow - apexAlarmOutputUti… |
| 1.3.6.1.4.1.1166.1.31.14.2.5.1.7 | ColumnapexOutputTsStatusServicesInError | read-only | current | Number of services in error mapped to the output stream. |
| 1.3.6.1.4.1.1166.1.31.14.2.5.1.8 | ColumnapexOutputTsStatusDepiSessionsMapped | read-only | current | Number of DEPI sessions currently mapped to the output. |
| 1.3.6.1.4.1.1166.1.31.14.2.5.1.9 | ColumnapexOutputTsStatusMessageGenerationNum | read-only | current | Number of messages generated (DVB tables) currently in the output. |
| 1.3.6.1.4.1.1166.1.31.14.2.5.1.10 | ColumnapexOutputTsStatusScgsProvisioned | read-only | current | Number of SCGs provisioned currently in the output. |
| 1.3.6.1.4.1.1166.1.31.14.2.5.1.11 | ColumnapexOutputTsStatusServicesMuxed | read-only | current | Number of services successfully multiplexed. |
| 1.3.6.1.4.1.1166.1.31.15 | NodeapexPsi | |||
| 1.3.6.1.4.1.1166.1.31.15.1 | NodeapexPsiConfig | |||
| 1.3.6.1.4.1.1166.1.31.15.1.1 | NodeapexPsiConfigGeneral | |||
| 1.3.6.1.4.1.1166.1.31.15.1.1.1 | ScalarapexPsiDetectionEnabled | read-write | current | The loss of input PSI detection enabled or disabled setting. When enabled, the APEX will check for missing input PSI (PATs and PMTs) based on the PSI detection… |
| 1.3.6.1.4.1.1166.1.31.15.1.1.2 | ScalarapexPsiDetectionTimeout | read-write | current | The loss of input PSI detection timeout value. When PSI detection is enabled, this is the number of seconds the APEX will use to determine if an input PSI mess… |
| 1.3.6.1.4.1.1166.1.31.15.1.1.3 | ScalarapexPsiRangeStart | read-write | current | Minimum PSI version number. Used to limit the APEX to use a specific range of PSI numbers. Set this to 0 to allow the APEX to use the full range of PSI version… |
| 1.3.6.1.4.1.1166.1.31.15.1.1.4 | ScalarapexPsiRangeStop | read-write | current | Maximum PSI version number. Used to limit the APEX to use a specific range of PSI numbers. Set this to 31 to allow the APEX to use the full range of PSI versio… |
| 1.3.6.1.4.1.1166.1.31.15.1.1.5 | ScalarapexPatVersionIncrement | read-write | current | Increment of PAT version upon reboot. Used to force the APEX to use a different PAT version number upon rebooting. Once written, the change to this parameter w… |
| 1.3.6.1.4.1.1166.1.31.15.1.1.6 | ScalarapexPmtVersionIncrement | read-write | current | Increment of PMT version upon reboot. Used to force the APEX to use a different PMT version number upon rebooting. Once written, the change to this parameter w… |
| 1.3.6.1.4.1.1166.1.31.15.1.1.7 | ScalarapexEcmEmmFirstPid | read-write | current | First ECM-EMM PID when PID Remapping is disabled on an output stream. This PID along with the apexEcmEmmNumberPids defines a range of PIDs that the APEX will u… |
| 1.3.6.1.4.1.1166.1.31.15.1.1.8 | ScalarapexEcmEmmNumberPids | read-write | current | Number of ECM-EMM PIDs to use when PID Remapping is disabled on an output stream. Refer to the apexEcmEmmFirstPid parameter for a complete description. Once wr… |
| 1.3.6.1.4.1.1166.1.31.15.1.1.9 | ScalarapexProgramBasedPmtOffset | read-write | current | Program Based PID Remapping PMT PID offset. Determines the first PMT PID to use when Program Based algorithm selected. PMT PID is calculated as: (Program Numbe… |
| 1.3.6.1.4.1.1166.1.31.15.1.1.10 | ScalarapexPsiCcErrorDetectionTimeout | read-write | current | Time in seconds to wait for PSI extraction after a CC error is detected. This is applicable if the object apexPsiCcErrorDetectionEnabled is set to enabled only… |
| 1.3.6.1.4.1.1166.1.31.15.1.1.11 | ScalarapexPsiCcErrorDetectionEnabled | read-write | current | Enable/disable field to start/stop PSI extraction when a Continuity Counter error is detected. The PSI extraction is stopped for the time duration configured i… |
| 1.3.6.1.4.1.1166.1.31.15.2 | NodeapexPsiStatus | |||
| 1.3.6.1.4.1.1166.1.31.15.2.1 | NodeapexPsiStatusGeneral | |||
| 1.3.6.1.4.1.1166.1.31.15.2.2 | TableapexPsiStatusTable | not-accessible | current | The following table contains a list of messages that are either being extracted from the input side or being inserted to the output side of the apex. On the in… |
| 1.3.6.1.4.1.1166.1.31.15.2.2.1 | RowapexPsiStatusEntry | not-accessible | current | PSI Table Entry. |
| 1.3.6.1.4.1.1166.1.31.15.2.2.1.1 | ColumnapexPsiStatusTableType | not-accessible | current | Indicates whether this message is extracted from an input or being inserted on an output. |
| 1.3.6.1.4.1.1166.1.31.15.2.2.1.2 | ColumnapexPsiStatusIndex | not-accessible | current | Indicates the input index or output number for which this message applies. For input, this is the index into the apexInputTsStatTable (1..784). For output, thi… |
| 1.3.6.1.4.1.1166.1.31.15.2.2.1.3 | ColumnapexPsiStatusPid | not-accessible | current | Indicates the PID that this message is contained in. |
| 1.3.6.1.4.1.1166.1.31.15.2.2.1.4 | ColumnapexPsiStatusMessageType | not-accessible | current | Indicates the MPEG message type of this message. |
| 1.3.6.1.4.1.1166.1.31.15.2.2.1.5 | ColumnapexPsiStatusProgramNumber | not-accessible | current | Indicates the Program Number which this message is part of. When a message is not specifically related to a program, this value is 0. |
| 1.3.6.1.4.1.1166.1.31.15.2.2.1.6 | ColumnapexPsiStatusSegment | not-accessible | current | Indicates the segment number of this message. Useful for PAT messages. Otherwise this is 0. |
| 1.3.6.1.4.1.1166.1.31.15.2.2.1.7 | ColumnapexPsiStatusPart | not-accessible | current | Since a message can be 1024 bytes long the message may divided into parts. Each part of the message is indexed using this index. |
| 1.3.6.1.4.1.1166.1.31.15.2.2.1.8 | ColumnapexPsiStatusBody | read-only | current | Raw ASCII hex of the PSI message. |
| 1.3.6.1.4.1.1166.1.31.15.2.2.1.9 | ColumnapexPsiStatusGpsTime | read-only | current | The GPS time when the PSI was added to the table. |
| 1.3.6.1.4.1.1166.1.31.16 | NodeapexOutputProgram | |||
| 1.3.6.1.4.1.1166.1.31.16.1 | NodeapexOutputProgramConfig | |||
| 1.3.6.1.4.1.1166.1.31.16.1.1 | NodeapexOutputProgramConfigGeneral | |||
| 1.3.6.1.4.1.1166.1.31.16.2 | NodeapexOutputProgramStatus | |||
| 1.3.6.1.4.1.1166.1.31.16.2.1 | NodeapexOutputProgramStatusGeneral | |||
| 1.3.6.1.4.1.1166.1.31.16.2.2 | TableapexOutputProgramTable | not-accessible | current | This table shows the input program to output program mapping status. |
| 1.3.6.1.4.1.1166.1.31.16.2.2.1 | RowapexOutputProgramEntry | not-accessible | current | Output Program Table Entry. |
| 1.3.6.1.4.1.1166.1.31.16.2.2.1.1 | ColumnapexOutputProgramIndex | not-accessible | current | Output Program Table Index. |
| 1.3.6.1.4.1.1166.1.31.16.2.2.1.2 | ColumnapexOutputProgramInputTsIndex | read-only | current | The index into the apexInputTsStatTable. |
| 1.3.6.1.4.1.1166.1.31.16.2.2.1.3 | ColumnapexOutputProgramInputProgNum | read-only | current | Input MPEG Program Number. |
| 1.3.6.1.4.1.1166.1.31.16.2.2.1.4 | ColumnapexOutputProgramOutputProgNum | read-only | current | Output MPEG Program Number. |
| 1.3.6.1.4.1.1166.1.31.16.2.2.1.5 | ColumnapexOutputProgramRoutingStatus | read-only | current | Current Program Routing Status. |
| 1.3.6.1.4.1.1166.1.31.16.2.2.1.6 | ColumnapexOutputProgramInputPreEncrypted | read-only | current | Indicates whether the program was pre-encrypted. Pre-encryption status is determined by the presence or absence of a CA ECM descriptor within the input PMT. |
| 1.3.6.1.4.1.1166.1.31.16.2.2.1.7 | ColumnapexOutputProgramOutputTsNum | read-only | current | Output Transport Stream Number. |
| 1.3.6.1.4.1.1166.1.31.16.2.2.1.8 | ColumnapexOutputProgramError | read-only | current | Indicates if the program is in error. |
| 1.3.6.1.4.1.1166.1.31.16.2.2.1.9 | ColumnapexOutputProgramEncryptionMode | read-only | current | Currently configured encryption mode for the program. none - indicates the program is not being encrypted for CTE or Broadcast encryption. unencrypted - Applie… |
| 1.3.6.1.4.1.1166.1.31.16.2.2.1.10 | ColumnapexOutputProgramEncryptionStatus | read-only | current | Current Program Encryption Status. |
| 1.3.6.1.4.1.1166.1.31.16.2.2.1.11 | ColumnapexOutputProgramEcmServiceId | read-only | current | The ECM service ID used when this program is encrypted. This is the service ID used in all ECM messages for this program. |
| 1.3.6.1.4.1.1166.1.31.16.2.2.1.12 | ColumnapexOutputProgramCciLevel | read-only | current | Copy protection CCI Level. This is only applicable when the program is being encrypted. |
| 1.3.6.1.4.1.1166.1.31.16.2.2.1.13 | ColumnapexOutputProgramApsLevel | read-only | current | Copy protection Analog Protection Services Level. This is only applicable when the program is being encrypted. |
| 1.3.6.1.4.1.1166.1.31.16.2.2.1.14 | ColumnapexOutputProgramCitSetting | read-only | current | Copy protection Constraint Image Trigger setting. This is only applicable when the program is being encrypted. |
| 1.3.6.1.4.1.1166.1.31.16.2.2.1.15 | ColumnapexOutputProgramNumberTiers | read-only | current | The number of program tiers. This is only applicable when the program is being encrypted. |
| 1.3.6.1.4.1.1166.1.31.16.2.2.1.16 | ColumnapexOutputProgramTierData | read-only | current | Current Program Tier Data. Tier information is in hexadecimal format. Up to 7 tiers of information are provided for each program. Tier information for each pro… |
| 1.3.6.1.4.1.1166.1.31.16.2.2.1.17 | ColumnapexOutputProgramSourceId | read-only | current | Broadcast Encryption Source ID. Only applies to programs when the input type is Gbe and the output encryption mode is Broadcast Encryption. (apexOutputTsConfEn… |
| 1.3.6.1.4.1.1166.1.31.16.2.2.1.18 | ColumnapexOutputProgramProviderId | read-only | current | Broadcast Encryption Provider ID. Only applies to programs when the input type is Gbe and the output encryption mode is Broadcast Encryption. (apexOutputTsConf… |
| 1.3.6.1.4.1.1166.1.31.16.2.2.1.19 | ColumnapexOutputProgramProgramType | read-only | current | Indicates how programs are to be built by the encryptor. 1 - programsDerived (default) - programs are derived where the encryptor builds the programs internall… |
| 1.3.6.1.4.1.1166.1.31.16.2.2.1.20 | ColumnapexOutputProgramDtaEncryptionMode | read-only | current | This parameter identifies whether a service in Full Encryption is in Modified Privacy Mode (DTA) and whether the DTA service has CCM messages. This parameter i… |
| 1.3.6.1.4.1.1166.1.31.16.2.2.1.21 | ColumnapexOutputProgramMcSimAccessCriteria | read-only | current | MC SimulCrypt Access Criteria. This is only applicable when 'apexEncryptionConfAlgorithm' is set to either mc-scte-52-simulcrypt or mc-csa-simulcrypt. |
| 1.3.6.1.4.1.1166.1.31.16.2.2.1.22 | ColumnapexOutputProgramMcSimAccessCriteriaStatus | read-only | current | SimulCrypt Access Criteria Status. This is only applicable when 'apexEncryptionConfAlgorithm' is set to either mc-scte-52-simulcrypt or mc-csa-simulcrypt. |
| 1.3.6.1.4.1.1166.1.31.16.2.2.1.23 | ColumnapexOutputProgramCurrentCSN | read-only | current | Current Category Sequence Number. This is Category Sequence Number which is used for encrypt the current service. The valid range is 0 to 255 and -1 is for NOT… |
| 1.3.6.1.4.1.1166.1.31.16.2.2.1.24 | ColumnapexOutputProgramMcSimAccessCriteriaString | read-only | current | Access Criteria used in the ECMG CW Provision Request when MC SimulCrypt is enabled. An empty string means the Access Criteria (AC) is not being used. |
| 1.3.6.1.4.1.1166.1.31.17 | NodeapexAcp | |||
| 1.3.6.1.4.1.1166.1.31.17.1 | NodeapexAcpConfig | |||
| 1.3.6.1.4.1.1166.1.31.17.1.1 | NodeapexAcpConfigGeneral | |||
| 1.3.6.1.4.1.1166.1.31.17.2 | NodeapexAcpStatus | |||
| 1.3.6.1.4.1.1166.1.31.17.2.1 | NodeapexAcpStatusGeneral | |||
| 1.3.6.1.4.1.1166.1.31.17.2.2 | TableapexAcpStatusTable | not-accessible | current | This table shows the status of the Control Word Generating ACPs. |
| 1.3.6.1.4.1.1166.1.31.17.2.2.1 | RowapexAcpStatusEntry | not-accessible | current | Output Program Table Entry. |
| 1.3.6.1.4.1.1166.1.31.17.2.2.1.1 | ColumnapexAcpStatusIndex | not-accessible | current | Acp Status Index. Index for one of six control word generating ACPs. |
| 1.3.6.1.4.1.1166.1.31.17.2.2.1.2 | ColumnapexAcpUnitAddress | read-only | current | The unit address of the ACP in ASCII Hex. The Unit address is a 5 byte value. |
| 1.3.6.1.4.1.1166.1.31.17.2.2.1.3 | ColumnapexAcpHealthByte | read-only | current | The health byte of the ACP. Indicates whether the ACP has intact fuses. The health should read 255 (hex 0xFF) for all APEX ACPs. Otherwise, the ACP will not pr… |
| 1.3.6.1.4.1.1166.1.31.17.2.2.1.4 | ColumnapexAcpEvenCsn | read-only | current | The Even Category Sequence Number of the ACP. Should match the even CSN assigned by DAC, if not may indicate a communications problem. |
| 1.3.6.1.4.1.1166.1.31.17.2.2.1.5 | ColumnapexAcpOddCsn | read-only | current | The Odd Category Sequence Number of the ACP. Should match the odd CSN assigned by DAC, if not may indicate a communications problem. |
| 1.3.6.1.4.1.1166.1.31.17.2.2.1.6 | ColumnapexAcpUnitAttribute | read-only | current | Unit attribute byte is made available to verify that the MC2.1 was properly unit created during factory production. |
| 1.3.6.1.4.1.1166.1.31.18 | NodeapexUdpPortMapping | |||
| 1.3.6.1.4.1.1166.1.31.18.1 | NodeapexUdpMapConfig | |||
| 1.3.6.1.4.1.1166.1.31.18.1.1 | NodeapexUdpMapConfigGeneral | |||
| 1.3.6.1.4.1.1166.1.31.18.1.1.1 | ScalarapexUdpMapPreEncryptCheck | read-write | current | UDP Mapping pre-encryption checking. Indicates if the APEX is to check if input services are pre-encrypted or clear. Pre-encrypted is determined by examining t… |
| 1.3.6.1.4.1.1166.1.31.18.1.1.2 | ScalarapexUdpMapModeBits | read-write | current | Value that will be placed in the two MSBs of each the calculated UDP port number (bits 14 and 15). Once written, the change to this parameter will take immedia… |
| 1.3.6.1.4.1.1166.1.31.18.1.1.3 | ScalarapexUdpMapTsOffset | read-write | current | Used as part of the Standardized UDP Port calculation. Transport Stream index can be relative 0 or relative 1. Once written, the change to this parameter will … |
| 1.3.6.1.4.1.1166.1.31.18.1.1.4 | ScalarapexUdpMapFollowDtcp | read-write | current | Determines how the copy protection settings (CCI, APS, and CIT) within the PRK will be set. All outputs in UDP Port Mapping mode will use this setting for foll… |
| 1.3.6.1.4.1.1166.1.31.18.1.2 | TableapexUdpMapApplyTable | not-accessible | current | Table of Apply Change for the data for UDP Map Table. A row in this table corresponds to the same row index in the UDP Map table. |
| 1.3.6.1.4.1.1166.1.31.18.1.2.1 | RowapexUdpMapApplyEntry | not-accessible | current | UDP Map Apply Table Entry. |
| 1.3.6.1.4.1.1166.1.31.18.1.2.1.1 | ColumnapexUdpMapApplyOutputTsNum | not-accessible | current | The index of the Udp Map Apply Table. |
| 1.3.6.1.4.1.1166.1.31.18.1.2.1.2 | ColumnapexUdpMapApplyChange | read-write | current | The Apply for the row of data in the Udp Map Table. A row in this table corresponds to the same row index in the Udp Map table. This parameter MUST be set to '… |
| 1.3.6.1.4.1.1166.1.31.18.1.3 | TableapexUdpMapTable | not-accessible | current | Table of data for Udp Mapping. There are 48 rows in this table. Each row corresponds to one QAM channel. Once written, the change to this table will only take … |
| 1.3.6.1.4.1.1166.1.31.18.1.3.1 | RowapexUdpMapEntry | not-accessible | current | Udp Mapping Table Entry. |
| 1.3.6.1.4.1.1166.1.31.18.1.3.1.1 | ColumnapexUdpMapOutputTsNum | not-accessible | current | Index of Udp Mapping Table. |
| 1.3.6.1.4.1.1166.1.31.18.1.3.1.2 | ColumnapexUdpMapInputInterface | read-write | current | Input GBE port. Range: '1 - 4' = GBE port number |
| 1.3.6.1.4.1.1166.1.31.18.1.3.1.3 | ColumnapexUdpMapStartProgNum | read-write | current | Indicates the first program number in a sequential range of programs that are to be routed to the same output transport stream. |
| 1.3.6.1.4.1.1166.1.31.18.1.3.1.4 | ColumnapexUdpMapNumberProgs | read-write | current | Indicates the number of programs that are to be mapped to the output transport stream. One UDP port is opened for each program mapped to the output transport s… |
| 1.3.6.1.4.1.1166.1.31.18.1.4 | TableapexUdpMapMulticastTable | not-accessible | current | Table of data for UDP Map Multicast. Each entry in this table identifies a Gigabit Ethernet input stream that is used for multicast UDP Port Mapping. Once writ… |
| 1.3.6.1.4.1.1166.1.31.18.1.4.1 | RowapexUdpMapMulticastEntry | not-accessible | current | UDP Map Multicast Table Entry. |
| 1.3.6.1.4.1.1166.1.31.18.1.4.1.1 | ColumnapexUdpMapMulticastIndex | not-accessible | current | Index of UDP Map Multicast Stream Table. |
| 1.3.6.1.4.1.1166.1.31.18.1.4.1.2 | ColumnapexUdpMapMulticastEnable | read-write | current | Indicates whether this UDP Map Multicast entry is enabled or disabled. |
| 1.3.6.1.4.1.1166.1.31.18.1.4.1.3 | ColumnapexUdpMapMulticastInterface | read-write | current | Number of the input interface (Port number). Range: '0' = Not Applicable GBE = 1-4 |
| 1.3.6.1.4.1.1166.1.31.18.1.4.1.4 | ColumnapexUdpMapMulticastUdp | read-write | current | GBE Input UDP Port. Range: 0-65535 |
| 1.3.6.1.4.1.1166.1.31.18.1.4.1.5 | ColumnapexUdpMapMulticastMcastIp | read-write | current | The Multicast receive IP address. An IP address of 0.0.0.0 indicates singlecast only. Multicast IP addresses 224.0.0.0 to 224.0.0.255 are reserved. |
| 1.3.6.1.4.1.1166.1.31.18.1.4.1.6 | ColumnapexUdpMapMulticastSourceIp | read-write | current | This is the IP address of the source device. This field is only used when a multicast IP address is also specified. |
| 1.3.6.1.4.1.1166.1.31.18.1.5 | TableapexUdpMapMulticastApplyTable | not-accessible | current | Table of Apply Change for the UDP Map Multicast Table. A row in this table corresponds to the same row index in the UDP Map Multicast Table (apexUdpMapMulticas… |
| 1.3.6.1.4.1.1166.1.31.18.1.5.1 | RowapexUdpMapMulticastApplyEntry | not-accessible | current | UDP Map Multicast Apply Table Entry. |
| 1.3.6.1.4.1.1166.1.31.18.1.5.1.1 | ColumnapexUdpMapMulticastApplyIndex | not-accessible | current | The index of the UDP Map Multicast Table. |
| 1.3.6.1.4.1.1166.1.31.18.1.5.1.2 | ColumnapexUdpMapMulticastApplyChange | read-write | current | The Apply for the row of data in the UDP Map Multicast Table. A row in this table corresponds to the same row index in the UDP Map Multicast Table. This parame… |
| 1.3.6.1.4.1.1166.1.31.18.2 | NodeapexUdpMapStatus | |||
| 1.3.6.1.4.1.1166.1.31.18.2.1 | NodeapexUdpMapStatusGeneral | |||
| 1.3.6.1.4.1.1166.1.31.18.2.1.1 | ScalarapexUdpMapMulticastInvalidApplyText | read-only | current | When apexUdpMapMulticastApplyChange is set to 'applyNotInProgressInvalidData' this entry may contain a text description of what was wrong with the data. This e… |
| 1.3.6.1.4.1.1166.1.31.18.2.2 | TableapexUdpMapStatusTable | not-accessible | current | Table of status data for Udp Mapping. There are 48 rows in this table. Each row corresponds to one QAM channel. |
| 1.3.6.1.4.1.1166.1.31.18.2.2.1 | RowapexUdpMapStatusEntry | not-accessible | current | Udp Mapping Status Table Entry. |
| 1.3.6.1.4.1.1166.1.31.18.2.2.1.1 | ColumnapexUdpMapStatusOutputTsNum | not-accessible | current | Index of Udp Mapping Status Table. |
| 1.3.6.1.4.1.1166.1.31.18.2.2.1.2 | ColumnapexUdpMapInvalidApplyText | read-only | current | When apexUdpMapApplyChange is set to applyNotInProgressInvalidData, this entry may contain a text description of what was wrong with the data. |
| 1.3.6.1.4.1.1166.1.31.19 | NodeapexRds | |||
| 1.3.6.1.4.1.1166.1.31.19.1 | NodeapexRdsConfig | |||
| 1.3.6.1.4.1.1166.1.31.19.1.1 | NodeapexRdsConfigGeneral | |||
| 1.3.6.1.4.1.1166.1.31.19.1.1.1 | ScalarapexRdsIpAddr | read-write | current | Rights Data Server IP address. Class A, B, or C IP address of the RDS. Changing this parameter will cause the APEX to perform an EMM rollover sequence. This pa… |
| 1.3.6.1.4.1.1166.1.31.19.1.1.2 | ScalarapexRdsTcpPort | read-write | current | Rights Data Server TCP port. Changing this parameter will cause the APEX to perform an EMM rollover sequence. Once written, the change to this parameter will o… |
| 1.3.6.1.4.1.1166.1.31.19.1.1.3 | ScalarapexRdsProgramEpochDuration | read-write | current | The Program Epoch Duration in minutes. Changes are not applied until the end of the current epoch. Once written, the change to this parameter will only take im… |
| 1.3.6.1.4.1.1166.1.31.19.1.1.4 | ScalarapexRdsCetPollInterval | read-write | current | Interval that the APEX will use to poll for CSN/State information. After receiving the CSN/State information, the APEX will determine if it needs to retrieve n… |
| 1.3.6.1.4.1.1166.1.31.19.1.1.5 | ScalarapexRdsCetRefresh | read-write | current | Setting to 'refresh' forces the APEX to retrieve new EMMs (APEX performs an EMM rollover sequence). Once written, the change to this parameter will take effect… |
| 1.3.6.1.4.1.1166.1.31.19.1.1.6 | ScalarapexRdsRmdPollInterval | read-write | current | Interval that the APEX will use to poll for RMD information. Once written, the change to this parameter will only take immediate effect after apexRdsConfigAppl… |
| 1.3.6.1.4.1.1166.1.31.19.1.1.7 | ScalarapexRdsRmdRefresh | read-write | current | Setting to 'refresh' forces the APEX to retrieve new RMD data from RDS server. Once written, the change to this parameter will take effect immediately. @Config… |
| 1.3.6.1.4.1.1166.1.31.19.1.1.8 | ScalarapexRdsPollRandomization | read-write | current | RDS Polling Randomization Time. Maximum time in minutes to delay polling at startup in order to avoid having many APEXs polling the RDS simultaneously. The act… |
| 1.3.6.1.4.1.1166.1.31.19.1.1.9 | ScalarapexRdsSetDefault | read-write | current | This parameter sets apexRdsCetPollInterval, apexRdsPollRandomization, apexRdsTcpPort, apexRdsRmdPollInterval, apexRdsProgramEpochDuration and apexRdsInitialEcm… |
| 1.3.6.1.4.1.1166.1.31.19.1.1.10 | ScalarapexRdsErrorCountReset | read-write | current | Resets RDS Communication error counts. Once written, the change to this parameter will take effect immediately. @Config(config=no, reboot=no) |
| 1.3.6.1.4.1.1166.1.31.19.1.1.11 | ScalarapexRdsConfigApplyChange | read-write | current | The Apply for RDS configuration items. This parameter MUST be set to 'apply' in order for any of the following to take effect: apexRdsIpAddr apexRdsTcpPort ape… |
| 1.3.6.1.4.1.1166.1.31.19.1.1.12 | ScalarapexRdsConfigRds2Enable | read-write | current | Indicates whether RDS-2 Interface is enabled or disabled. Once written, the change to this parameter will only take immediate effect after apexRdsConfigApplyCh… |
| 1.3.6.1.4.1.1166.1.31.19.1.1.13 | ScalarapexRdsConfigServerUrl | read-write | current | Rights Data Server Uniform Resource Locator (RDS-2 Server URL). This is introduced to support RDS 2 Interface since APEX 2.5 release. The syntax of this parame… |
| 1.3.6.1.4.1.1166.1.31.19.1.1.14 | ScalarapexRdsInitialEcmRetryInterval | read-write | current | This parameter is used to configure RDS2 server ECM retry time. This value defines when the next retry will be performed by the host. Units are seconds. Once w… |
| 1.3.6.1.4.1.1166.1.31.19.1.1.15 | ScalarapexRdsDeviceId | read-write | current | This parameter is used to configure Device ID. This value will be used by APEX1000 to fetch the Access Criteria, using RDS1 interface when 'apexEncryptionConfA… |
| 1.3.6.1.4.1.1166.1.31.19.2 | NodeapexRdsStatus | |||
| 1.3.6.1.4.1.1166.1.31.19.2.1 | NodeapexRdsStatusGeneral | |||
| 1.3.6.1.4.1.1166.1.31.19.2.1.1 | ScalarapexRdsConnectionStatus | read-only | current | Rights Data Server connection status. |
| 1.3.6.1.4.1.1166.1.31.19.2.1.2 | ScalarapexRdsCurrentCsn | read-only | current | This is the current CSN that the APEX is using for encrypting all programs. |
| 1.3.6.1.4.1.1166.1.31.19.2.1.3 | ScalarapexRdsCetNextPollTime | read-only | current | Time in seconds until the next CET polling period. |
| 1.3.6.1.4.1.1166.1.31.19.2.1.4 | ScalarapexRdsRmdNextPollTime | read-only | current | Time in seconds until the next RMD polling period. |
| 1.3.6.1.4.1.1166.1.31.19.2.1.5 | ScalarapexRdsEmmStatusTableSize | read-only | current | EMM Status Table Size. This is the maximum number of rows in the EMM Status Table and is the limit on apexRdsEmmStatusIndex. |
| 1.3.6.1.4.1.1166.1.31.19.2.1.6 | ScalarapexRdsProgramMessagesReceived | read-only | current | Number of successful ServiceEncrypt messages received in the last 15 minutes. |
| 1.3.6.1.4.1.1166.1.31.19.2.1.7 | ScalarapexRdsProgramMessagesFailed | read-only | current | Number of failed ServiceEncrypt messages received in the last 15 minutes. |
| 1.3.6.1.4.1.1166.1.31.19.2.1.8 | ScalarapexRdsCommErrorCount | read-only | current | Count of total server communication errors. This parameter is set to 0 when the APEX boots up. |
| 1.3.6.1.4.1.1166.1.31.19.2.1.9 | ScalarapexRdsCommStatus | read-only | current | Status of communication with RDS. |
| 1.3.6.1.4.1.1166.1.31.19.2.1.10 | ScalarapexRdsFlashWriteCount | read-only | current | Running count of the number of flash memory erasures/writes. |
| 1.3.6.1.4.1.1166.1.31.19.2.1.11 | ScalarapexRdsMcast16 | read-only | current | Multicast-16 bit address used for build PRK messages. The multicast-16 bit address is from the EMMs received. |
| 1.3.6.1.4.1.1166.1.31.19.2.1.12 | ScalarapexRdsStatusServerIp | read-only | current | Effective Rights Data Server IP address. Derived from RDS Server URL. This is set to 0.0.0.0 when validation on RDS Server URL fails. See apexRdsConfigServerUr… |
| 1.3.6.1.4.1.1166.1.31.19.2.1.13 | ScalarapexRdsStatusServerPort | read-only | current | Effective Rights Data Server TCP port. Derived from RDS Server URL. This is set to 0 when validation on RDS Server URL fails. See apexRdsConfigServerUrl. |
| 1.3.6.1.4.1.1166.1.31.19.2.1.14 | ScalarapexRdsStatusServerRootDirPath | read-only | current | Effective Rights Data Server Root Directory Path. Derived from RDS Server URL. This is set to Null String when validation on RDS Server URL fails. See apexRdsC… |
| 1.3.6.1.4.1.1166.1.31.19.2.1.15 | ScalarapexRdsStatusValidation | read-only | current | Indicates whether the current RDS Server URL parameter is valid. urlValid (1) - RDS-2 URL is valid, missingIpOrPath (2) - RDS-2 IP or Root Path is missing, emp… |
| 1.3.6.1.4.1.1166.1.31.19.2.2 | TableapexRdsEmmStatusTable | not-accessible | current | Table of the most recent RDS responses. |
| 1.3.6.1.4.1.1166.1.31.19.2.2.1 | RowapexRdsEmmStatusEntry | not-accessible | current | RDS EMM Status Table Entry. |
| 1.3.6.1.4.1.1166.1.31.19.2.2.1.1 | ColumnapexRdsEmmStatusIndex | not-accessible | current | Index of EMM Status Table. Size of table can be found in apexRdsEmmStatusTableSize. |
| 1.3.6.1.4.1.1166.1.31.19.2.2.1.2 | ColumnapexRdsEmmStatusCsn | read-only | current | Category Sequence Number (CSN). |
| 1.3.6.1.4.1.1166.1.31.19.2.2.1.3 | ColumnapexRdsEmmStatusState | read-only | current | Category Epoch Transition (CET) State. |
| 1.3.6.1.4.1.1166.1.31.19.2.2.1.4 | ColumnapexRdsEmmStatusGpsTime | read-only | current | This is the time in GPS seconds that this row was written. |
| 1.3.6.1.4.1.1166.1.31.19.2.2.1.5 | ColumnapexRdsEmmStatusServerError | read-only | current | This is the error code reported to the APEX by the RDS. Zero indicates no error. |
| 1.3.6.1.4.1.1166.1.31.19.2.2.1.6 | ColumnapexRdsEmmStatusUnitAddress | read-only | current | This is the ACP address of the ACP associated with the error reported in apexRdsEmmStatusServerError. If no address is contained in this entry, the error appli… |
| 1.3.6.1.4.1.1166.1.31.19.2.3 | TableapexRdsSourceLookupTable | not-accessible | current | This table provides a list of Source IDs and Provider IDs along with an associated string. This table of information is provided by the RDS to make it easier f… |
| 1.3.6.1.4.1.1166.1.31.19.2.3.1 | RowapexRdsSourceLookupEntry | not-accessible | current | Source Lookup Table Entry. |
| 1.3.6.1.4.1.1166.1.31.19.2.3.1.1 | ColumnapexRdsSourceLookupIndex | not-accessible | current | Source Lookup Table Index. |
| 1.3.6.1.4.1.1166.1.31.19.2.3.1.2 | ColumnapexRdsSourceLookupDescription | read-only | current | Text Description of the service provided by the Rights Data Server. |
| 1.3.6.1.4.1.1166.1.31.19.2.3.1.3 | ColumnapexRdsSourceLookupSourceId | read-only | current | Source Id of the service. |
| 1.3.6.1.4.1.1166.1.31.19.2.3.1.4 | ColumnapexRdsSourceLookupProviderId | read-only | current | Provider Id of the service. |
| 1.3.6.1.4.1.1166.1.31.19.2.4 | TableapexRdsEventTable | not-accessible | current | Table of Rds2 Events. The first index (apexRdsEventProgramIndex) matches to the same row index in the apexManualRouteTable. |
| 1.3.6.1.4.1.1166.1.31.19.2.4.1 | RowapexRdsEventEntry | not-accessible | current | Rds2 Events Table Entry. |
| 1.3.6.1.4.1.1166.1.31.19.2.4.1.1 | ColumnapexRdsEventProgramIndex | not-accessible | current | apexRdsEventProgramIndex is the last 10 bits of apexOutputProgramEcmServiceId from apexOutputProgramTable. |
| 1.3.6.1.4.1.1166.1.31.19.2.4.1.2 | ColumnapexRdsEventEventIndex | not-accessible | current | Rds Event Index. |
| 1.3.6.1.4.1.1166.1.31.19.2.4.1.3 | ColumnapexRdsEventEpochNumber | read-only | current | Uniquely identifies a program epoch for the specified service. |
| 1.3.6.1.4.1.1166.1.31.19.2.4.1.4 | ColumnapexRdsEventEpochStart | read-only | current | Start time in GPS seconds of the returned program epoch for the specified service. |
| 1.3.6.1.4.1.1166.1.31.19.2.4.1.5 | ColumnapexRdsEventEpochEnd | read-only | current | End time in GPS seconds of the returned program epoch. |
| 1.3.6.1.4.1.1166.1.31.19.2.4.1.6 | ColumnapexRdsEventInterstitialDuration | read-only | current | The interstitial duration provides the time duration in seconds between the start of the program epoch and the start of the actual program or event. |
| 1.3.6.1.4.1.1166.1.31.19.2.4.1.7 | ColumnapexRdsEventPreviewDuration | read-only | current | The preview window provides the time duration in seconds between the start of the program epoch and the start of the pay portion of the program. |
| 1.3.6.1.4.1.1166.1.31.19.2.4.1.8 | ColumnapexRdsEventPurchaseDuration | read-only | current | The purchase window provides the time duration in seconds between the start of the program epoch that IPPV purchases are allowed. |
| 1.3.6.1.4.1.1166.1.31.19.2.4.1.9 | ColumnapexRdsEventNumberTiers | read-only | current | A program can be associated with at most 7 tiers. |
| 1.3.6.1.4.1.1166.1.31.19.2.4.1.10 | ColumnapexRdsEventTierData | read-only | current | Program Tier Data in Hexadecimal format (28 bytes). Up to 7 tiers of information are provided for each program. Tier information for each program consists of 4… |
| 1.3.6.1.4.1.1166.1.31.19.2.4.1.11 | ColumnapexRdsEventProgramCost | read-only | current | Represents the cost, in program units, of the program epoch. |
| 1.3.6.1.4.1.1166.1.31.19.2.4.1.12 | ColumnapexRdsEventRatingRegion | read-only | current | Identifies the Program Rating Region. The US region attribute is 0. |
| 1.3.6.1.4.1.1166.1.31.19.2.4.1.13 | ColumnapexRdsEventRatingData | read-only | current | Program Rating Data in Hexadecimal format (3 bytes). Contains 6 rating dimensions where each rating dimension is a 4-bit integer that represents a different ra… |
| 1.3.6.1.4.1.1166.1.31.19.2.4.1.14 | ColumnapexRdsEventRatingText | read-only | current | Program Rating optionally contains a Rating Text. |
| 1.3.6.1.4.1.1166.1.31.19.2.4.1.15 | ColumnapexRdsEventControlByte | read-only | current | The program control byte used in the PRKM (1 Hexadecimal byte). |
| 1.3.6.1.4.1.1166.1.31.19.2.4.1.16 | ColumnapexRdsEventPrkmWkemAvailable | read-only | current | The flag indicates that PRKM, WKEM (odd and even) is available for the associated epoch. |
| 1.3.6.1.4.1.1166.1.31.19.2.4.1.17 | ColumnapexRdsEventCcmAvailable | read-only | current | The flag indicates that CCM (odd and even) is available for the associated epoch. |
| 1.3.6.1.4.1.1166.1.31.20 | NodeapexEncryption | |||
| 1.3.6.1.4.1.1166.1.31.20.1 | NodeapexEncryptionConfig | |||
| 1.3.6.1.4.1.1166.1.31.20.1.1 | NodeapexEncryptionConfigGeneral | |||
| 1.3.6.1.4.1.1166.1.31.20.1.1.1 | ScalarapexEncryptionConfAlgorithm | read-write | current | Configured encryption algorithm. This value determines which MUX FPGA image will be loaded. dvb-csa-simulcrypt must be selected to allow for configuration of S… |
| 1.3.6.1.4.1.1166.1.31.20.1.1.2 | ScalarapexSimulcryptExternalEisSetting | read-write | current | Default simulcrypt External EIS encryption setting. This determines if services are sent out in the clear or are encrypted when Simulcrypt mode is set to Exter… |
| 1.3.6.1.4.1.1166.1.31.20.1.1.3 | ScalarapexSimulcryptEmEnable | read-write | current | Simulcrypt EM Enable. If set to 'enabled' the EM will display the Simulcrypt specific screens. User will be allowed to view Simulcrypt status and perform confi… |
| 1.3.6.1.4.1.1166.1.31.20.1.1.4 | ScalarapexEncryptionConfApplyChange | read-write | current | The Apply for apexEncryptionConfAlgorithm. This parameter MUST be set to 'apply' in order for apexEncryptionConfAlgorithm to take effect: This parameter MUST b… |
| 1.3.6.1.4.1.1166.1.31.20.1.1.5 | ScalarapexEncryptionConfInvalidApplyText | read-only | current | When apexEncryptionConfApplyChange is set to 'applyNotInProgressInvalidData' this entry may contain a text description of what was wrong with the data. |
| 1.3.6.1.4.1.1166.1.31.20.1.2 | NodeapexCteConfig | |||
| 1.3.6.1.4.1.1166.1.31.20.1.2.1 | ScalarapexCteEncryptionMode | read-write | current | This parameter is used to set the Encryption Mode. It applies to all services on all QAMs in CTE mode. - 'full' - The APEX will use Full encryption. The APEX w… |
| 1.3.6.1.4.1.1166.1.31.20.1.2.2 | ScalarapexCteCciLevel | read-write | current | Copy Control Information (CCI) Level setting for PRK messages. - notDefined - CCI is not defined, settop box applications can configure CCI - copyFreely - prog… |
| 1.3.6.1.4.1.1166.1.31.20.1.2.3 | ScalarapexCteApsLevel | read-write | current | Analog Protection System (APS) Level setting for PRK messages. Defines what copy protection encoding will be applied to the analog composite output by the sett… |
| 1.3.6.1.4.1.1166.1.31.20.1.2.4 | ScalarapexCteCitEnable | read-write | current | Constrained Image Trigger (CIT) setting. If set to 'enabled' the settop box is notified not to allow a high quality digital output unless the receiving device … |
| 1.3.6.1.4.1.1166.1.31.20.1.2.5 | ScalarapexCteCommonTier | read-write | current | EncryptionCommon Tier. Identifies the tier number for which access is granted. Range is 0 to 16777215. 65535 is reserved and cannot be used. The APEX will set … |
| 1.3.6.1.4.1.1166.1.31.20.1.2.6 | ScalarapexCteApplyChange | read-write | current | The Apply for CTE configuration items. This parameter MUST be set to 'apply' in order for any of the following to take effect: apexCteEncryptionMode apexCteCci… |
| 1.3.6.1.4.1.1166.1.31.20.2 | NodeapexEncryptionStatus | |||
| 1.3.6.1.4.1.1166.1.31.20.2.1 | NodeapexEncryptionStatusGeneral | |||
| 1.3.6.1.4.1.1166.1.31.20.2.1.1 | ScalarapexEncryptionStatAlgorithm | read-only | current | Current encryption algorithm. This value determines which MUX FPGA image will be loaded. |
| 1.3.6.1.4.1.1166.1.31.20.2.1.2 | NodeapexEncryptionCwgStatus | |||
| 1.3.6.1.4.1.1166.1.31.20.2.1.2.1 | ScalarapexEncryptionCwgPerSecond | read-only | current | Average control words per second generated integrated over the last minute. |
| 1.3.6.1.4.1.1166.1.31.20.2.1.2.2 | ScalarapexEncryptionMux1CollisionCount | read-only | current | Triton collision counter for MUX FPGA #1. |
| 1.3.6.1.4.1.1166.1.31.20.2.1.2.3 | ScalarapexEncryptionMux2CollisionCount | read-only | current | Triton collision counter for MUX FPGA #2. |
| 1.3.6.1.4.1.1166.1.31.20.2.1.2.4 | ScalarapexEncryptionMux1RolloverCount | read-only | current | Counts rollovers of triton message circular buffer for MUX FPGA #1. |
| 1.3.6.1.4.1.1166.1.31.20.2.1.2.5 | ScalarapexEncryptionMux2RolloverCount | read-only | current | Counts rollovers of triton message circular buffer for MUX FPGA #2. |
| 1.3.6.1.4.1.1166.1.31.20.2.1.2.6 | ScalarapexEncryptionEmmRequestsSent | read-only | current | Counts number of triton EMM reports sent to 6 MC2.1 devices. |
| 1.3.6.1.4.1.1166.1.31.20.2.1.2.7 | ScalarapexEncryptionEmmGoodRepliesRecvd | read-only | current | Counts number of triton EMM replies marked good received from mc2.1 devices. |
| 1.3.6.1.4.1.1166.1.31.20.2.1.2.8 | ScalarapexEncryptionEmmBadRepliesRecvd | read-only | current | Counts number of triton EMM replies marked bad received from mc2.1 devices. |
| 1.3.6.1.4.1.1166.1.31.20.2.1.2.9 | ScalarapexEncryptionEmmGoodDeliveryTimeMs | read-only | current | Amount of time expressed in milliseconds taken to deliver entire set of EMMs for most recent successful attempt. Note it takes MC2.1 a significant amount of ti… |
| 1.3.6.1.4.1.1166.1.31.20.2.1.2.10 | ScalarapexEncryptionEmmMaxDeliveryTimeMs | read-only | current | Maximum amount of time expressed in milliseconds taken to deliver an entire set of EMMs since the Apex unit was last rebooted. |
| 1.3.6.1.4.1.1166.1.31.20.2.1.2.11 | ScalarapexEncryptionEmmMinDeliveryTimeMs | read-only | current | Minimum amount of time expressed in milliseconds taken to deliver an entire set of EMMs since the Apex unit was last rebooted. |
| 1.3.6.1.4.1.1166.1.31.20.2.1.2.12 | TableapexEncryptionMcDiagTable | not-accessible | current | Diagnostic table that breaks out individual mc21 performance parameters. Indexed 1-6 for the 6 MC2.1 devices in an APEX ACP Module. |
| 1.3.6.1.4.1.1166.1.31.20.2.1.2.12.1 | RowapexEncryptionMcDiagEntry | not-accessible | current | A row in the mc2.1 diagnostic table. |
| 1.3.6.1.4.1.1166.1.31.20.2.1.2.12.1.1 | ColumnapexEncryptionMcDiagDeviceIndex | not-accessible | current | Index represents 1 of 6 MC2.1 devices installed on ACP Module. |
| 1.3.6.1.4.1.1166.1.31.20.2.1.2.12.1.2 | ColumnapexEncryptionCwCountsPerSecond | read-only | current | Number of CW successfully generated on this MC2.1 per second, integrated over the last minute. |
| 1.3.6.1.4.1.1166.1.31.21 | NodeapexEas | |||
| 1.3.6.1.4.1.1166.1.31.21.1 | NodeapexEasConfig | |||
| 1.3.6.1.4.1.1166.1.31.21.1.1 | NodeapexEasConfigGeneral | |||
| 1.3.6.1.4.1.1166.1.31.21.1.1.1 | ScalarapexEasApplyChange | read-write | obsolete | This object is obsolete. The Apply for any entries in the apexEasConfigGeneral group. This parameter MUST be set to 'apply' in order for any of the data in the… |
| 1.3.6.1.4.1.1166.1.31.21.1.1.2 | ScalarapexEasPhysInType | read-write | obsolete | This object is obsolete. Input Type of input from which to extract EAS messages. When set to 0, no EAS is received (disables EAS extraction). Once written, the… |
| 1.3.6.1.4.1.1166.1.31.21.1.1.3 | ScalarapexEasPhysInPort | read-write | obsolete | This object is obsolete. Number of the input, of type configured by apexEasPhysInType, from which to extract EAS messages. Once written, the change to this par… |
| 1.3.6.1.4.1.1166.1.31.21.1.1.4 | ScalarapexEasRcvUdpPort | read-write | obsolete | This object is obsolete. This parameter indicates the UDP port on which to receive EAS messages. Range is 1024 to 65535 when apexEasPhysInType is 'fastEnet'. R… |
| 1.3.6.1.4.1.1166.1.31.21.1.1.5 | ScalarapexEasMulticastIpAddress | read-write | obsolete | This object is obsolete. This parameter indicates the Multicast IP Receive address on which to receive EAS messages. If 0.0.0.0, then EAS messages will be rece… |
| 1.3.6.1.4.1.1166.1.31.21.1.1.6 | ScalarapexEasSourceIpAddress | read-write | obsolete | This object is obsolete. This parameter indicates the Source IP Receive address on which to receive EAS messages. This is only for IGMP v3 networks. If 0.0.0.0… |
| 1.3.6.1.4.1.1166.1.31.21.1.1.7 | ScalarapexEasMessageReceiveTimeoutDuration | read-write | current | It is the timeout duration(in days)that the device expects at least one EAS message from the each EAS server configured in 'apexEasServerTable'. Default value … |
| 1.3.6.1.4.1.1166.1.31.21.1.1.8 | ScalarapexEasMessageReceiveTimeoutEventEnable | read-write | current | It enables or disables raising of the event 'trapEasMessageNotReceived' Default value is disabled. @Config(config=yes, reboot=no) @Save(apexSaveConfig, value=2… |
| 1.3.6.1.4.1.1166.1.31.21.1.2 | TableapexEasOutputTable | not-accessible | current | Table of parameters for configuring EAS Output. Table is indexed by Output Transport Stream Number. @Config(config=yes, reboot=no) @Save(apexSaveConfig, value=… |
| 1.3.6.1.4.1.1166.1.31.21.1.2.1 | RowapexEasOutputEntry | not-accessible | current | A row in the EAS output table. |
| 1.3.6.1.4.1.1166.1.31.21.1.2.1.1 | ColumnapexEasOutputStreamNum | not-accessible | current | The output transport stream number. |
| 1.3.6.1.4.1.1166.1.31.21.1.2.1.2 | ColumnapexEasOutputEnable | read-write | current | The enable setting for EAS output on this Output Transport Stream. Once written, the change to this parameter will take immediate effect. In order for the chan… |
| 1.3.6.1.4.1.1166.1.31.21.1.3 | TableapexEasServerApplyTable | not-accessible | current | Apply table for the apexEasServerTable. Table is indexed by RF Port number. |
| 1.3.6.1.4.1.1166.1.31.21.1.3.1 | RowapexEasServerApplyEntry | not-accessible | current | EAS Server Configuration Apply Table Entry. |
| 1.3.6.1.4.1.1166.1.31.21.1.3.1.1 | ColumnapexEasServerApplyNum | not-accessible | current | The EAS Server number. |
| 1.3.6.1.4.1.1166.1.31.21.1.3.1.2 | ColumnapexEasServerApplyChange | read-write | current | The Apply for a row in the apexEasServerTable. This parameter MUST be set to 'apply' in order for any of the data in the apexEasServerTable table to take effec… |
| 1.3.6.1.4.1.1166.1.31.21.1.4 | TableapexEasServerTable | not-accessible | current | Table of parameters for configuring EAS Servers. Table is indexed by RF Port number. @Config(config=yes, reboot=no) @Commit(param=apexEasServerApplyChange, val… |
| 1.3.6.1.4.1.1166.1.31.21.1.4.1 | RowapexEasServerEntry | not-accessible | current | A row in the EAS server table. |
| 1.3.6.1.4.1.1166.1.31.21.1.4.1.1 | ColumnapexEasServerNum | not-accessible | current | The EAS Server number. |
| 1.3.6.1.4.1.1166.1.31.21.1.4.1.2 | ColumnapexEasServerPhysInType | read-write | current | Input Type of input from which to extract EAS messages. When set to 0, no EAS is received (disables EAS extraction). Once written, the change to this parameter… |
| 1.3.6.1.4.1.1166.1.31.21.1.4.1.3 | ColumnapexEasServerPhysInPort | read-write | current | Number of the input, of type configured by apexEasServerPhysInType, from which to extract EAS messages. Once written, the change to this parameter will only ta… |
| 1.3.6.1.4.1.1166.1.31.21.1.4.1.4 | ColumnapexEasServerRcvUdpPort | read-write | current | This parameter indicates the UDP port on which to receive EAS messages. Range is 1024 to 65535 when apexEasServerPhysInType is 'fastEnet'. Range is 0 to 65535 … |
| 1.3.6.1.4.1.1166.1.31.21.1.4.1.5 | ColumnapexEasServerMulticastIpAddress | read-write | current | This parameter indicates the Multicast IP Receive address on which to receive EAS messages. If 0.0.0.0, then EAS messages will be received via singlecast only.… |
| 1.3.6.1.4.1.1166.1.31.21.1.4.1.6 | ColumnapexEasServerSourceIpAddress | read-write | current | This parameter indicates the Source IP Receive address on which to receive EAS messages. This is only for IGMP v3 networks. If 0.0.0.0, then source IP is not u… |
| 1.3.6.1.4.1.1166.1.31.21.2 | NodeapexEasStatus | |||
| 1.3.6.1.4.1.1166.1.31.21.2.1 | NodeapexEasStatusGeneral | |||
| 1.3.6.1.4.1.1166.1.31.21.2.1.1 | ScalarapexEasNumRcvMsgs | read-only | current | Total number of EAS messages received. |
| 1.3.6.1.4.1.1166.1.31.21.2.1.2 | ScalarapexEasNumInvalRcvMsgs | read-only | current | Total number of Invalid EAS messages received (invalid CRC). These messages are discarded. |
| 1.3.6.1.4.1.1166.1.31.21.2.2 | TableapexEasLastReceivedMessageStatusTable | not-accessible | current | Table of parameters for last received EAS message details. |
| 1.3.6.1.4.1.1166.1.31.21.2.2.1 | RowapexEasLastReceivedMessageStatusEntry | not-accessible | current | A row in the last received EAS message details table. |
| 1.3.6.1.4.1.1166.1.31.21.2.2.1.1 | ColumnapexEasLastReceivedMessageServerNum | not-accessible | current | The EAS Server index number. |
| 1.3.6.1.4.1.1166.1.31.21.2.2.1.2 | ColumnapexEasLastReceivedMessageTime | read-only | current | Time when the last EAS message was received. Zero indicates EAS message is yet to be received or not configured. This time is reported in GPS seconds. To deter… |
| 1.3.6.1.4.1.1166.1.31.22 | NodeapexChassisRedundancy | |||
| 1.3.6.1.4.1.1166.1.31.22.1 | NodeapexChassisRedundancyConfig | |||
| 1.3.6.1.4.1.1166.1.31.22.1.1 | NodeapexChassisRedundancyConfigGeneral | |||
| 1.3.6.1.4.1.1166.1.31.22.1.1.1 | ScalarapexChassisRedundancyConfigEnable | read-write | current | This is to enable/disable APEX chassis redundancy. When set to disabled(1), APEX is not allowed to failover. When set to enabled(2), APEX can failover on its r… |
| 1.3.6.1.4.1.1166.1.31.22.1.1.2 | ScalarapexChassisRedundancyMode | read-write | current | Configures the desired role of APEX. Primary has active output ports, secondary is inactive with output ports muted. @Config(config=yes, reboot=no) @Commit(par… |
| 1.3.6.1.4.1.1166.1.31.22.1.1.3 | ScalarapexChassisRedundancyMulticastRedundancyMode | read-write | current | This is used to process route mappings by the standby APEX. When set to hot(0) on standby APEX, all the routes processed by the active APEX will also be proces… |
| 1.3.6.1.4.1.1166.1.31.22.1.1.4 | ScalarapexChassisRedundancyUdpPort | read-write | current | This UDP port number value is used as: (1) The port number on which to receive heartbeat messages from the redundant APEX (2) The port number to which heartbea… |
| 1.3.6.1.4.1.1166.1.31.22.1.1.5 | ScalarapexChassisRedundancyRedundantApexIp | read-write | current | Unicast IP address of redundant APEX. This IP address is used to send heartbeat messages to the redundant IP. This IP address should match with the ENET1 or EN… |
| 1.3.6.1.4.1.1166.1.31.22.1.1.6 | ScalarapexChassisRedundancySuspend | read-write | current | When set to enabled(2), this results in APEX unit failover and become active if it is in standby or suspend state. If the condition above is not met, setting t… |
| 1.3.6.1.4.1.1166.1.31.22.1.1.7 | ScalarapexChassisRedundancyForceFailOver | read-write | current | When set to failover(2), this results in the APEX unit failing over if it is in active state and the redundant APEX is in standby state. If the condition above… |
| 1.3.6.1.4.1.1166.1.31.22.1.1.8 | ScalarapexChassisRedundancyFailOverGigE12LinkLoss | read-write | current | Configures if both GigE 1&2 link loss is cause for a failover. @Config(config=yes, reboot=no) @Commit(param=apexChassisRedundancyConfigApplyChange, value=2) @S… |
| 1.3.6.1.4.1.1166.1.31.22.1.1.9 | ScalarapexChassisRedundancyFailOverGigE34LinkLoss | read-write | current | Configures if both GigE 3&4 experience link loss is cause for failover. @Config(config=yes, reboot=no) @Commit(param=apexChassisRedundancyConfigApplyChange, va… |
| 1.3.6.1.4.1.1166.1.31.22.1.1.10 | ScalarapexChassisRedundancyFailOverEnet1LinkLoss | read-write | current | Configures if ENET1 link loss is cause for failover. @Config(config=yes, reboot=no) @Commit(param=apexChassisRedundancyConfigApplyChange, value=2) @Save(apexSa… |
| 1.3.6.1.4.1.1166.1.31.22.1.1.11 | ScalarapexChassisRedundancyFailOverEnet2LinkLoss | read-write | current | Configures if ENET2 link loss is cause for failover. @Config(config=yes, reboot=no) @Commit(param=apexChassisRedundancyConfigApplyChange, value=2) @Save(apexSa… |
| 1.3.6.1.4.1.1166.1.31.22.1.1.12 | ScalarapexChassisRedundancyFailOverTemperatureFault | read-write | current | Configures if the temperature fault is a cause for failover. @Config(config=yes, reboot=no) @Commit(param=apexChassisRedundancyConfigApplyChange, value=2) @Sav… |
| 1.3.6.1.4.1.1166.1.31.22.1.1.13 | ScalarapexChassisRedundancyFailOverQamModuleFault | read-write | current | Configures if a QAM module fault is a cause for failover. @Config(config=yes, reboot=no) @Commit(param=apexChassisRedundancyConfigApplyChange, value=2) @Save(a… |
| 1.3.6.1.4.1.1166.1.31.22.1.1.14 | ScalarapexChassisRedundancyFailOverQamRfPortFault | read-write | current | Configures if a QAM RF port fault is a cause for failover. @Config(config=yes, reboot=no) @Commit(param=apexChassisRedundancyConfigApplyChange, value=2) @Save(… |
| 1.3.6.1.4.1.1166.1.31.22.1.1.15 | ScalarapexChassisRedundancyFailOverQamChannelFault | read-write | current | Configures if a QAM channel fault is a cause for failover. @Config(config=yes, reboot=no) @Commit(param=apexChassisRedundancyConfigApplyChange, value=2) @Save(… |
| 1.3.6.1.4.1.1166.1.31.22.1.1.16 | ScalarapexChassisRedundancyConfigApplyChange | read-write | current | The Apply for Chassis Redundancy Configuration parameters. This parameter MUST be set to 'apply' in order for the data to take effect. This parameter MUST be s… |
| 1.3.6.1.4.1.1166.1.31.22.1.1.17 | ScalarapexChassisRedundancyPrimaryStandbyOverride | read-write | current | This parameter is set to ENABLED while configuring the apex as primary apex. If this parameter is set, the apex will goto ACTIVE state irrespective of secondar… |
| 1.3.6.1.4.1.1166.1.31.22.1.1.18 | ScalarapexChassisRedundancyRedundantApexSecIp | read-write | current | Unicast IP address of redundant APEX heartbeat backup interface. This IP address is used to send backup heartbeat messages to the redundant IP. This IP address… |
| 1.3.6.1.4.1.1166.1.31.22.1.1.19 | ScalarapexChassisRedundancyRedundantHBEnable | read-write | current | This parameter is set to ENABLED to configure backup heartbeat interface IP. Heartbeat message in the Backup heartbeat interface is used if the Primary heartbe… |
| 1.3.6.1.4.1.1166.1.31.22.1.1.20 | ScalarapexChassisRedundancyFailOverQamModuleRemoval | read-write | current | If this parameter is set to ENABLED then QAM Module removal fault will cause the failover. @Config(config=yes, reboot=no) @Commit(param=apexChassisRedundancyCo… |
| 1.3.6.1.4.1.1166.1.31.22.2 | NodeapexChassisRedundancyStatus | |||
| 1.3.6.1.4.1.1166.1.31.22.2.1 | NodeapexChassisRedundancyStatusGeneral | |||
| 1.3.6.1.4.1.1166.1.31.22.2.1.1 | ScalarapexChassisRedundancyPrimaryApexStatus | read-only | current | This parameter is applicable for an APEX where chassis redundancy is enabled. The APEX configured as primary will report the following values: active(1): Prima… |
| 1.3.6.1.4.1.1166.1.31.22.2.1.2 | ScalarapexChassisRedundancySecondaryApexStatus | read-only | current | This parameter is applicable for an APEX where chassis redundancy is enabled. The APEX configured as primary will report the following values: These are based … |
| 1.3.6.1.4.1.1166.1.31.22.2.1.3 | ScalarapexChassisRedundancyState | read-only | current | This parameter is applicable for an APEX where chassis redundancy is enabled. This parameter will report the chassis redundancy availability status. These are … |
| 1.3.6.1.4.1.1166.1.31.22.2.1.4 | ScalarapexChassisRedundancyCommunicationStatus | read-only | current | This parameter is applicable for an APEX where chassis redundancy is enabled. This parameter will report the chassis redundancy communication status. These are… |
| 1.3.6.1.4.1.1166.1.31.22.2.1.5 | ScalarapexChassisRedundancyConfigurationStatus | read-only | current | This parameter is applicable for an APEX where chassis redundancy is enabled. This parameter will report the chassis redundancy configuration status. These are… |
| 1.3.6.1.4.1.1166.1.31.22.2.1.6 | ScalarapexChassisRedundancyStatusInvalidApplyText | read-only | current | When apexChassisRedundancyConfigApplyChange is set to 'applyNotInProgressInvalidData' this entry may contain a text description of what was wrong with the data. |
| 1.3.6.1.4.1.1166.1.31.22.2.1.7 | ScalarapexChassisRedundancyGeneralConfigSyncStatusText | read-only | current | GigE Config Sync Error info |
| 1.3.6.1.4.1.1166.1.31.22.2.1.8 | ScalarapexChassisRedundancyGigEMismatchStatus | read-only | current | This parameter indicates whether the GigE configuration of the apexes in Chassis Redundancy pair match. Both the APEXs will report the following values: These … |
| 1.3.6.1.4.1.1166.1.31.22.2.1.9 | ScalarapexChassisRedundancyQamMismatchStatus | read-only | current | This parameter indicates whether the QAM configuration of the apexes in Chassis Redundancy pair match. Both the APEXs will report the following values: These a… |
| 1.3.6.1.4.1.1166.1.31.22.2.1.10 | ScalarapexChassisRedundancyFirmwareMismatchStatus | read-only | current | This parameter indicates whether the Firmware version of the apexes in Chassis Redundancy pair match. Both the APEXs will report the following values: These ar… |
| 1.3.6.1.4.1.1166.1.31.22.2.1.11 | ScalarapexChassisRedundancyGigE12LinkStatus | read-only | current | This parameter indicates the combined alarm status of the GigE 1 and GigE 2. Indicates the lower of the gigE input interface alarm conditions. ok (1): No alarm… |
| 1.3.6.1.4.1.1166.1.31.22.2.1.12 | ScalarapexChassisRedundancyGigE34LinkStatus | read-only | current | This parameter indicates the combined alarm status of the GigE3 and GigE4. Indicates the lower of the gigE input interface alarm conditions. ok (1): No alarm o… |
| 1.3.6.1.4.1.1166.1.31.22.2.1.13 | ScalarapexChassisRedundancyCurrHBIntfIPStatus | read-only | current | This parameter indicates the heartbeat interface used for receiving heartbeat from the redundant APEX. |
| 1.3.6.1.4.1.1166.1.31.22.2.1.14 | ScalarapexChassisRedundancyAppliedEncAlgorithmStatus | read-only | current | This parameter indicates if there is a match/mismatch in the applied encryption algorithm of the pair APEXs in chassis redundancy. Both the APEXs will report t… |
| 1.3.6.1.4.1.1166.1.31.22.2.1.15 | ScalarapexChassisRedundancyMCSimEntitlementStatus | read-only | current | This parameter indicates if there is a match/mismatch in the ULS license of MC SimulCrypt for the chassis redundancy pair APEXes. The mismatch will be indicate… |
| 1.3.6.1.4.1.1166.1.31.23 | NodeapexDta | |||
| 1.3.6.1.4.1.1166.1.31.23.1 | NodeapexDtaConfig | |||
| 1.3.6.1.4.1.1166.1.31.23.1.1 | NodeapexDtaGeneralConfig | |||
| 1.3.6.1.4.1.1166.1.31.23.1.1.1 | ScalarapexDtaGeneralConfigCatSourceType | read-write | current | When set to internal(0), APEX generates CAT and inserts EMM pid received from DAC. When set to external(1), APEX will not generate CAT, it will receive both CA… |
| 1.3.6.1.4.1.1166.1.31.23.1.1.2 | ScalarapexDtaGeneralConfigCatEmmPidMulticastIP | read-write | current | Multicast IPv4 address on which CAT/EMM PID stream is available. An IP Address of 0.0.0.0 indicates unicast stream. @Config(config=yes, reboot=no) @Commit(para… |
| 1.3.6.1.4.1.1166.1.31.23.1.1.3 | ScalarapexDtaGeneralConfigCatEmmPidSourceIP | read-write | current | Source IP address to receive CAT/EMM PID stream. This is used only if apexQamRfConfigDtaNetworkPidMulticastIP is set to a multicast address. @Config(config=yes… |
| 1.3.6.1.4.1.1166.1.31.23.1.1.4 | ScalarapexDtaGeneralConfigCatEmmPidUdpPort | read-write | current | UDP port to receive CAT/EMM PID stream. The range of valid UDP port numbers are 1024 to 65535. @Config(config=yes, reboot=no) @Commit(param=apexDtaGeneralConfi… |
| 1.3.6.1.4.1.1166.1.31.23.1.1.5 | ScalarapexDtaGeneralConfigCatEmmPidInterface | read-write | current | Fast Ethernet or GIGE Interface to receive CAT/EMM PID stream. CAT/EMM PID streams can be received from either fast etherent (ENET1 or ENET2) or GIGE etherent … |
| 1.3.6.1.4.1.1166.1.31.23.1.1.6 | ScalarapexDtaGeneralConfigEmmPidNum | read-write | current | EMM PID to insert on DTA enabled OTS. The range of valid PID numbers are 0x1C00 to 0x1FFE. @Config(config=yes, reboot=no) @Commit(param=apexDtaGeneralConfigApp… |
| 1.3.6.1.4.1.1166.1.31.23.1.1.7 | ScalarapexDtaGeneralConfigApplyChange | read-write | current | The Apply for DTA Configuration parameters. This parameter MUST be set to 'apply' in order for the DTA Cat Config data to take effect. This parameter MUST be s… |
| 1.3.6.1.4.1.1166.1.31.23.1.1.8 | ScalarapexDtaGeneralConfigInvalidApplyText | read-only | current | When apexDtaGeneralConfigApplyChange is set to 'applyNotInProgressInvalidData' this entry may contain a text description of what was wrong with DTA CAT/EMM PID… |
| 1.3.6.1.4.1.1166.1.31.23.1.2 | TableapexDtaConfigApplyTable | not-accessible | current | Apply table for the configuration tables apexDtaRfPortConfigTable and apexDtaOtsConfigTable. |
| 1.3.6.1.4.1.1166.1.31.23.1.2.1 | RowapexDtaConfigApplyEntry | not-accessible | current | DTA RF Port Configuration Apply Table Entry. |
| 1.3.6.1.4.1.1166.1.31.23.1.2.1.1 | ColumnapexDtaConfigApplyIndex | not-accessible | current | Defines the size of apexDtaRfPortConfigTable. DTA NET PID can be configured for each RF port. This shall be the number of maximum number of QAM RF port. |
| 1.3.6.1.4.1.1166.1.31.23.1.2.1.2 | ColumnapexDtaConfigApplyChange | read-write | current | The Apply for a row of data in apexDtaRfPortConfigTable. The Apply for eight rows of data in apexDtaOtsConfigTable. A row in this table corresponds to the same… |
| 1.3.6.1.4.1.1166.1.31.23.1.3 | TableapexDtaRfPortConfigTable | not-accessible | current | Table of DTA configuration items configurable on a RF Port basis. Once written, the change to this table will only take immediate effect after apexDtaConfigApp… |
| 1.3.6.1.4.1.1166.1.31.23.1.3.1 | RowapexDtaRfPortConfigEntry | not-accessible | current | DTA RF port configuration Table Entry. |
| 1.3.6.1.4.1.1166.1.31.23.1.3.1.1 | ColumnapexDtaRfPortConfigIndex | not-accessible | current | The QAM RF Port number. |
| 1.3.6.1.4.1.1166.1.31.23.1.3.1.2 | ColumnapexDtaRfPortConfigNetPidMulticastIP | read-write | current | Multicast IPv4 address on which Network PID stream is available. An IP Address of 0.0.0.0 indicates unicast stream. |
| 1.3.6.1.4.1.1166.1.31.23.1.3.1.3 | ColumnapexDtaRfPortConfigNetPidSourceIP | read-write | current | Source IP address to receive Network PID stream. This is used only if apexDtaRfPortConfigNetPidMulticastIP is set to a multicast address. |
| 1.3.6.1.4.1.1166.1.31.23.1.3.1.4 | ColumnapexDtaRfPortConfigNetPidUdpPort | read-write | current | UDP port number to receive Network PID stream. The range of valid port numbers are 1024 to 65535. |
| 1.3.6.1.4.1.1166.1.31.23.1.3.1.5 | ColumnapexDtaRfPortConfigNetPidInterface | read-write | current | Fast Ethernet or GIGE Interface to receive Network PID stream. Network PID stream can be received from either fast etherent (ENET1 or ENET2) or GIGE etherent p… |
| 1.3.6.1.4.1.1166.1.31.23.1.3.1.6 | ColumnapexDtaRfPortConfigNetPidNum | read-write | current | Network PID to insert on DTA enabled OTS. The range of valid PID numbers are 0x1C00 to 0x1FFE. |
| 1.3.6.1.4.1.1166.1.31.23.1.4 | TableapexDtaOtsConfigTable | not-accessible | current | Table of DTA configuration items for output transport streams (OTS). Once written, the change to this table will only take immediate effect after apexDtaConfig… |
| 1.3.6.1.4.1.1166.1.31.23.1.4.1 | RowapexDtaOtsConfigEntry | not-accessible | current | DTA OTS enable configuration Table Entry. |
| 1.3.6.1.4.1.1166.1.31.23.1.4.1.1 | ColumnapexDtaOtsConfigIndex | not-accessible | current | The Output Transport Stream(OTS) number. |
| 1.3.6.1.4.1.1166.1.31.23.1.4.1.2 | ColumnapexDtaOtsConfigEnable | read-write | current | This is to enable/disable of inserting DTA messages on OTS. When set to disabled(1), DTA messages are not allowed to insert on OTS. When set to enabled(2), DTA… |
| 1.3.6.1.4.1.1166.1.31.24 | NodeapexDepi | |||
| 1.3.6.1.4.1.1166.1.31.24.1 | NodeapexDepiConfig | |||
| 1.3.6.1.4.1.1166.1.31.24.1.1 | NodeapexDepiConfigGeneral | |||
| 1.3.6.1.4.1.1166.1.31.24.1.1.1 | ScalarapexDepiConfigHostname | read-write | current | Host name defined as the FQDM of the APEX-EQAM device. @Config(config=yes, reboot=no) @Save(apexSaveConfig, value=2, default=yes) @File(config.ini, type='ini') |
| 1.3.6.1.4.1.1166.1.31.24.2 | NodeapexDepiStatus | |||
| 1.3.6.1.4.1.1166.1.31.24.2.1 | NodeapexDepiStatusGeneral | |||
| 1.3.6.1.4.1.1166.1.31.24.2.1.1 | ScalarapexDepiStatusGeneralDtiPort1LinkActive | read-only | current | This indicates if the DTI Ethernet link is active. |
| 1.3.6.1.4.1.1166.1.31.24.2.1.2 | ScalarapexDepiStatusGeneralDtiPort2LinkActive | read-only | current | This indicates if the second DTI Ethernet link is active. |
| 1.3.6.1.4.1.1166.1.31.24.2.1.3 | ScalarapexDepiStatusGeneralDtiClientStatusMode | read-only | current | The DTI Client MUST support and report these operational modes. |
| 1.3.6.1.4.1.1166.1.31.24.2.1.4 | ScalarapexDepiStatusGeneralDtiClientPhaseError | read-only | current | 24-bit Phase Error in units of 149.8 MHz sample clock cycles. The lower eight bits of the 24-bit field MUST be padded with zeros and MUST NOT be used by the DT… |
| 1.3.6.1.4.1.1166.1.31.24.2.1.5 | ScalarapexDepiStatusGeneralDtiCurrentTimestamp | read-only | current | DOCSIS 32-bit timestamp (DTS). |
| 1.3.6.1.4.1.1166.1.31.24.2.1.6 | ScalarapexDepiStatusGeneralDtiPort1CableAdvanceValue | read-only | current | 24-bit Cable Advance value is derived by dividing the cable delay by 2. |
| 1.3.6.1.4.1.1166.1.31.24.2.1.7 | ScalarapexDepiStatusGeneralDtiPort2CableAdvanceValue | read-only | current | 24-bit Cable Advance value is derived by dividing the cable delay by 2. |
| 1.3.6.1.4.1.1166.1.31.24.3 | NodeapexDepiControl | |||
| 1.3.6.1.4.1.1166.1.31.24.3.1 | NodeapexDepiControlConfig | |||
| 1.3.6.1.4.1.1166.1.31.24.3.1.1 | NodeapexDepiControlConfigGeneral | |||
| 1.3.6.1.4.1.1166.1.31.24.3.1.1.1 | ScalarapexDepiControlConfigGeneralKeepaliveTimeout | read-write | current | Timeout in seconds to wait while no control or data messages are received within the connection before sending a DEPI:HELLO message. Default is 60 seconds. @Co… |
| 1.3.6.1.4.1.1166.1.31.24.3.1.2 | TableapexDepiControlConfigApplyTable | not-accessible | current | Table of Apply Change for the data for apexDepiControlConfigTable. Entries in the apexDepiControlConfigTable cannot be modified while DEPI Control Connections … |
| 1.3.6.1.4.1.1166.1.31.24.3.1.2.1 | RowapexDepiControlConfigApplyEntry | not-accessible | current | DEPI Control Configuration Apply Table Entry. |
| 1.3.6.1.4.1.1166.1.31.24.3.1.2.1.1 | ColumnapexDepiControlConfigApplyIndex | not-accessible | current | The index of the Depi Control Config Apply Table. |
| 1.3.6.1.4.1.1166.1.31.24.3.1.2.1.2 | ColumnapexDepiControlConfigApplyChange | read-write | current | The Apply for any entries in the apexDepiControlConfigTable. Entries in the apexDepiControlConfigTable cannot be modified while DEPI Control Connections and DE… |
| 1.3.6.1.4.1.1166.1.31.24.3.1.3 | TableapexDepiControlConfigTable | not-accessible | current | This table provides a list of DEPI Control Connections initiated by M-CMTS Cores. A maximum of 10 connections is accepted. Entries in the apexDepiControlConfig… |
| 1.3.6.1.4.1.1166.1.31.24.3.1.3.1 | RowapexDepiControlConfigEntry | not-accessible | current | DEPI Control Configuration Table Entry. |
| 1.3.6.1.4.1.1166.1.31.24.3.1.3.1.1 | ColumnapexDepiControlConfigIndex | not-accessible | current | The index of the Depi Control Config Table. |
| 1.3.6.1.4.1.1166.1.31.24.3.1.3.1.2 | ColumnapexDepiControlConfigEnable | read-write | current | The enable setting for DEPI Control Connection. Once written, the change to this parameter will take immediate effect. In order for the change to persist throu… |
| 1.3.6.1.4.1.1166.1.31.24.3.1.3.1.3 | ColumnapexDepiControlConfigInterfaceNumber | read-write | current | Represents the Gigabit Ethernet interface number. Range: '0' = Not Applicable GBE = 1-4 |
| 1.3.6.1.4.1.1166.1.31.24.3.1.3.1.4 | ColumnapexDepiControlConfigSrcIpAddr | read-write | current | This parameter indicates the M-CMTS Core IP address. |
| 1.3.6.1.4.1.1166.1.31.24.3.1.3.1.5 | ColumnapexDepiControlConfigOverUdp | read-write | current | This parameter indicates whether the DEPI Control Connection and Sessions will be accepted over the UDP protocol. |
| 1.3.6.1.4.1.1166.1.31.24.3.1.3.1.6 | ColumnapexDepiControlConfigType | read-write | current | This parameter indicates whether DEPI Sessions are established dynamically using the DEPI control protocol or statically. Not supported. |
| 1.3.6.1.4.1.1166.1.31.24.3.2 | NodeapexDepiControlStatus | |||
| 1.3.6.1.4.1.1166.1.31.24.3.2.1 | NodeapexDepiControlStatusGeneral | |||
| 1.3.6.1.4.1.1166.1.31.24.3.2.1.1 | ScalarapexDepiControlStatusGeneralTotalConnections | read-only | current | The number of DEPI Control Connections established since reboot. |
| 1.3.6.1.4.1.1166.1.31.24.3.2.1.2 | ScalarapexDepiControlStatusGeneralCurrentConnections | read-only | current | The current number of DEPI Control Connections currently connected. |
| 1.3.6.1.4.1.1166.1.31.24.3.2.1.3 | ScalarapexDepiControlStatusGeneralRejectedConnections | read-only | current | The number of control connection requests rejected for any reason. |
| 1.3.6.1.4.1.1166.1.31.24.3.2.1.4 | ScalarapexDepiControlStatusGeneralUnknownConnectionMessages | read-only | current | The number of DEPI control messages ignored not related to any existing control connection i.e. unrecognized connection identifier. |
| 1.3.6.1.4.1.1166.1.31.24.3.2.1.5 | ScalarapexDepiControlStatusGeneralUnknownSessionMessages | read-only | current | The number of DEPI messages ignored not related to any existing session i.e. unrecognized session identifier. |
| 1.3.6.1.4.1.1166.1.31.24.3.2.1.6 | ScalarapexDepiControlStatusGeneralInvalidApplyText | read-only | current | When apexDepiControlConfigApplyChange is set to 'applyNotInProgressInvalidData' this entry may contain a text description of what was wrong with the data. This… |
| 1.3.6.1.4.1.1166.1.31.24.3.2.2 | TableapexDepiControlStatusTable | not-accessible | current | Table of read-only status information pertaining to the DEPI Control Connections. |
| 1.3.6.1.4.1.1166.1.31.24.3.2.2.1 | RowapexDepiControlStatusEntry | not-accessible | current | DEPI Control Status Table Entry. |
| 1.3.6.1.4.1.1166.1.31.24.3.2.2.1.1 | ColumnapexDepiControlStatusIndex | not-accessible | current | DEPI Session ID |
| 1.3.6.1.4.1.1166.1.31.24.3.2.2.1.2 | ColumnapexDepiControlStatusLocalUdp | read-only | current | The EQAM UDP port used in DEPI session messages from M-CMTS core. Only valid for DEPI connections using L2TPv3/UDP/IP. |
| 1.3.6.1.4.1.1166.1.31.24.3.2.2.1.3 | ColumnapexDepiControlStatusRemoteUdp | read-only | current | The M-CMTS UDP port used in DEPI session messages from M-CMTS core. Only valid for DEPI connections using L2TPv3/UDP/IP. |
| 1.3.6.1.4.1.1166.1.31.24.3.2.2.1.4 | ColumnapexDepiControlStatusConnectionStatus | read-only | current | M-CMTS core to the EQAM control connection status |
| 1.3.6.1.4.1.1166.1.31.24.3.2.2.1.5 | ColumnapexDepiControlStatusUnknownCtl | read-only | current | Number of unrecognized DEPI messages not marked as mandatory received on this control connection. |
| 1.3.6.1.4.1.1166.1.31.24.3.2.2.1.6 | ColumnapexDepiControlStatusMalformedCtl | read-only | current | Number of malformed DEPI messages received on this control connection. |
| 1.3.6.1.4.1.1166.1.31.24.3.2.2.1.7 | ColumnapexDepiControlStatusUnknownAvp | read-only | current | Number of messages received on this control connection with an unsupported AVP. |
| 1.3.6.1.4.1.1166.1.31.24.3.2.2.1.8 | ColumnapexDepiControlStatusMalformedAvp | read-only | current | Number of messages received on this control connection with malformed AVP. |
| 1.3.6.1.4.1.1166.1.31.24.3.2.2.1.9 | ColumnapexDepiControlStatusInvalidVendorId | read-only | current | Number of messages with an unsupported Vendor ID received on this control connection. The supported vendor IDs are 0 or 4491. |
| 1.3.6.1.4.1.1166.1.31.24.3.2.2.1.10 | ColumnapexDepiControlStatusHbitSet | read-only | current | Number of messages received on this control connection with H-bit set to 1. |
| 1.3.6.1.4.1.1166.1.31.24.3.2.2.1.11 | ColumnapexDepiControlStatusTotalSessions | read-only | current | Total number of sessions established on this control connection since EQAM reboot. Only valid for dynamically established connections. |
| 1.3.6.1.4.1.1166.1.31.24.3.2.2.1.12 | ColumnapexDepiControlStatusCurrentSessions | read-only | current | Number of session currently established on this control connection. Only valid for dynamically established connections. |
| 1.3.6.1.4.1.1166.1.31.24.3.2.2.1.13 | ColumnapexDepiControlStatusRejectedSessions | read-only | current | Number of session setup related (ICQR/ICCN) messages rejected on this control connection. |
| 1.3.6.1.4.1.1166.1.31.24.4 | NodeapexDepiSession | |||
| 1.3.6.1.4.1.1166.1.31.24.4.1 | NodeapexDepiSessionConfig | |||
| 1.3.6.1.4.1.1166.1.31.24.4.1.1 | TableapexDepiSessionConfigApplyTable | not-accessible | current | Table of Apply Change for the data for apexDepiSessionConfigTable. |
| 1.3.6.1.4.1.1166.1.31.24.4.1.1.1 | RowapexDepiSessionConfigApplyEntry | not-accessible | current | DEPI Session Status Table Entry. |
| 1.3.6.1.4.1.1166.1.31.24.4.1.1.1.1 | ColumnapexDepiSessionConfigApplyOutputTsNum | not-accessible | current | The index of the Depi Session Config Apply Table. |
| 1.3.6.1.4.1.1166.1.31.24.4.1.1.1.2 | ColumnapexDepiSessionConfigApplyChange | read-write | current | The Apply for any entries in the apexDepiSessionConfigTable. This parameter MUST be set to 'apply' in order for any of the data in the apexDepiSessionConfigTab… |
| 1.3.6.1.4.1.1166.1.31.24.4.1.2 | TableapexDepiSessionConfigTable | not-accessible | current | Table of data for DEPI Session Mapping. There are 48 rows in this table mapping QAM output TS to DEPI Session. Once written, the change to this table will only… |
| 1.3.6.1.4.1.1166.1.31.24.4.1.2.1 | RowapexDepiSessionConfigEntry | not-accessible | current | DEPI Session Config Table Entry. |
| 1.3.6.1.4.1.1166.1.31.24.4.1.2.1.1 | ColumnapexDepiSessionConfigOutputTsNum | not-accessible | current | The QAM output transport stream number which to associate the DEPI Session. |
| 1.3.6.1.4.1.1166.1.31.24.4.1.2.1.2 | ColumnapexDepiSessionConfigEnable | read-write | current | The enable setting for DEPI Session. Once written, the change to this parameter will take immediate effect. In order for the change to persist through subseque… |
| 1.3.6.1.4.1.1166.1.31.24.4.1.2.1.3 | ColumnapexDepiSessionConfigControlId | read-write | current | DOCSIS Control ID assignment. Value of 0 indicates transport stream to be used for Video only. |
| 1.3.6.1.4.1.1166.1.31.24.4.1.2.1.4 | ColumnapexDepiSessionConfigDocsisTsid | read-write | current | The system wide unique M-CMTS TSID mapped to the QAM. This TSID is specified by the remote ID from the ICRQ message. |
| 1.3.6.1.4.1.1166.1.31.24.4.1.2.1.5 | ColumnapexDepiSessionConfigUdpPort | read-write | current | UDP port number defining the DEPI Session (if UDP is enabled.) The range of valid port numbers is 1 to 65535. |
| 1.3.6.1.4.1.1166.1.31.24.4.1.2.1.6 | ColumnapexDepiSessionConfigSyncCorrection | read-write | current | Enable or disable updating the timestamp in the SYNC messages. This is only valid for static connections. (For dynamically established sessions, M-CMTS core en… |
| 1.3.6.1.4.1.1166.1.31.24.4.2 | NodeapexDepiSessionStatus | |||
| 1.3.6.1.4.1.1166.1.31.24.4.2.1 | NodeapexDepiSessionStatusGeneral | |||
| 1.3.6.1.4.1.1166.1.31.24.4.2.1.1 | ScalarapexDepiSessionStatusGeneralInvalidApplyText | read-only | current | When apexDepiSessionConfigApplyChange is set to 'applyNotInProgressInvalidData' this entry may contain a text description of what was wrong with the data. This… |
| 1.3.6.1.4.1.1166.1.31.24.4.2.2 | TableapexDepiSessionStatusTable | not-accessible | current | Table of read-only status information pertaining to the DEPI Sessions. |
| 1.3.6.1.4.1.1166.1.31.24.4.2.2.1 | RowapexDepiSessionStatusEntry | not-accessible | current | DEPI Session Status Table Entry. |
| 1.3.6.1.4.1.1166.1.31.24.4.2.2.1.1 | ColumnapexDepiSessionStatusIndex | not-accessible | current | DEPI Session ID. |
| 1.3.6.1.4.1.1166.1.31.24.4.2.2.1.2 | ColumnapexDepiSessionStatusControlId | read-only | current | The DEPI Control ID this session belongs to. |
| 1.3.6.1.4.1.1166.1.31.24.4.2.2.1.3 | ColumnapexDepiSessionStatusOutputQAMChannel | read-only | current | The QAM Channel number this session is mapped to. |
| 1.3.6.1.4.1.1166.1.31.24.4.2.2.1.4 | ColumnapexDepiSessionStatusLocalUdp | read-only | current | The local UDP port used by the APEX to communicate the DEPI Session messages to the M-CMTS Core |
| 1.3.6.1.4.1.1166.1.31.24.4.2.2.1.5 | ColumnapexDepiSessionStatusRemoteUdp | read-only | current | The remote UDP port used by the M-CMTS Core to communicate the DEPI Session messages to the Apex. |
| 1.3.6.1.4.1.1166.1.31.24.4.2.2.1.6 | ColumnapexDepiSessionStatusStatus | read-only | current | M-CMTS core to the EQAM control connection status |
| 1.3.6.1.4.1.1166.1.31.24.4.2.2.1.7 | ColumnapexDepiSessionStatusPerHopBehavior | read-only | current | Per Hop Behavior value for this session. |
| 1.3.6.1.4.1.1166.1.31.24.4.2.2.1.8 | ColumnapexDepiSessionStatusUnknownCtl | read-only | current | Number of unrecognized DEPI messages not marked as mandatory received on this session. |
| 1.3.6.1.4.1.1166.1.31.24.4.2.2.1.9 | ColumnapexDepiSessionStatusMalformedCtl | read-only | current | Number of malformed DEPI messages received on this session. |
| 1.3.6.1.4.1.1166.1.31.24.4.2.2.1.10 | ColumnapexDepiSessionStatusUnknownAvp | read-only | current | Number of messages received on this session with an unsupported AVP. |
| 1.3.6.1.4.1.1166.1.31.24.4.2.2.1.11 | ColumnapexDepiSessionStatusMalformedAvp | read-only | current | Number of messages received on this session with malformed AVP. |
| 1.3.6.1.4.1.1166.1.31.24.4.2.2.1.12 | ColumnapexDepiSessionStatusInvalidVendorId | read-only | current | Number of messages with an unsupported Vendor ID received on this session. The supported vendor IDs are 0 or 4491. |
| 1.3.6.1.4.1.1166.1.31.24.4.2.2.1.13 | ColumnapexDepiSessionStatusHbitSet | read-only | current | Number of messages received on this session with H-bit set to 1. |
| 1.3.6.1.4.1.1166.1.31.24.4.2.2.1.14 | ColumnapexDepiSessionStatusInSLIMsgs | read-only | current | Number of SLI messages received on this session. |
| 1.3.6.1.4.1.1166.1.31.24.4.2.2.1.15 | ColumnapexDepiSessionStatusOutSLIMsgs | read-only | current | Number of SLI messages sent on this session. |
| 1.3.6.1.4.1.1166.1.31.24.4.2.2.1.16 | ColumnapexDepiSessionStatusIngressDlmMsgs | read-only | current | Number of DLM messages received on this session. |
| 1.3.6.1.4.1.1166.1.31.24.4.2.2.1.17 | ColumnapexDepiSessionStatusEgressDlmMsgs | read-only | current | Number of DLM messages sent on this session. |
| 1.3.6.1.4.1.1166.1.31.24.4.2.2.1.18 | ColumnapexDepiSessionStatusLatencyStart | read-only | current | Last latency related timestamp start value received. |
| 1.3.6.1.4.1.1166.1.31.24.4.2.2.1.19 | ColumnapexDepiSessionStatusLatencyEnd | read-only | current | Last latency related timestamp end value received. |
| 1.3.6.1.4.1.1166.1.31.24.4.2.2.1.20 | ColumnapexDepiSessionStatusInDataPackets | read-only | current | Number of data packets received on this session. |
| 1.3.6.1.4.1.1166.1.31.24.4.2.2.1.21 | ColumnapexDepiSessionStatusInSequenceDiscards | read-only | current | Number of data packets received on this session that are discarded due to sequencing error. |
| 1.3.6.1.4.1.1166.1.31.24.4.2.2.1.22 | ColumnapexDepiSessionStatusInDataPacketDiscards | read-only | current | Number of data packets received on this session that are discarded for reasons other than sequencing errors. |
| 1.3.6.1.4.1.1166.1.31.24.4.2.2.1.23 | ColumnapexDepiSessionStatusSessionID | read-only | current | Remote DEPI Session ID, used by the Remote End to identify the DEPI Session and locally to bind the Session to a QAM Channel. |
| 1.3.6.1.4.1.1166.1.31.25 | NodeapexPsip | |||
| 1.3.6.1.4.1.1166.1.31.25.1 | NodeapexPsipConfig | |||
| 1.3.6.1.4.1.1166.1.31.25.1.1 | NodeapexPsipConfigGeneral | |||
| 1.3.6.1.4.1.1166.1.31.25.1.1.1 | ScalarapexPsipConfigApplyChange | read-write | current | The Apply for parameters in apexPsipConfigGeneral. This parameter MUST be set to 'apply' in order for other apexPsipConfigGeneral parameters to take effect. Th… |
| 1.3.6.1.4.1.1166.1.31.25.1.1.2 | ScalarapexPsipConfigMgtMsgInsertionPeriod | read-write | current | Specify insertion rate (ms) for MGT PSIP table. Once written, the change to this parameter will only take immediate effect after apexPsipConfigApplyChange is s… |
| 1.3.6.1.4.1.1166.1.31.25.1.1.3 | ScalarapexPsipConfigSttMsgInsertionPeriod | read-write | current | Specify insertion rate (ms) for STT PSIP table. Once written, the change to this parameter will only take immediate effect after apexPsipConfigApplyChange is s… |
| 1.3.6.1.4.1.1166.1.31.25.1.1.4 | ScalarapexPsipConfigCvctMsgInsertionPeriod | read-write | current | Specify insertion rate (ms) for CVCT PSIP table. Once written, the change to this parameter will only take immediate effect after apexPsipConfigApplyChange is … |
| 1.3.6.1.4.1.1166.1.31.25.1.1.5 | ScalarapexPsipConfigRrtMsgInsertionPeriod | read-write | current | Specify insertion rate (ms) for RRT PSIP table. Once written, the change to this parameter will only take immediate effect after apexPsipConfigApplyChange is s… |
| 1.3.6.1.4.1.1166.1.31.25.1.1.6 | ScalarapexPsipConfigEit0InsertionPeriod | read-write | current | EIT insertion rate (ms) of EIT-0. Once written, the change to this parameter will only take immediate effect after apexPsipConfigApplyChange is set to 'apply'.… |
| 1.3.6.1.4.1.1166.1.31.25.1.1.7 | ScalarapexPsipConfigEit1InsertionPeriod | read-write | current | EIT insertion rate (ms) of EIT-1. Once written, the change to this parameter will only take immediate effect after apexPsipConfigApplyChange is set to 'apply'.… |
| 1.3.6.1.4.1.1166.1.31.25.1.1.8 | ScalarapexPsipConfigEit2InsertionPeriod | read-write | current | EIT insertion rate (ms) of EIT-2. Once written, the change to this parameter will only take immediate effect after apexPsipConfigApplyChange is set to 'apply'.… |
| 1.3.6.1.4.1.1166.1.31.25.1.1.9 | ScalarapexPsipConfigEit3InsertionPeriod | read-write | current | EIT insertion rate (ms) of EIT-3. Once written, the change to this parameter will only take immediate effect after apexPsipConfigApplyChange is set to 'apply'.… |
| 1.3.6.1.4.1.1166.1.31.25.1.2 | NodeapexPsipConfigTime | |||
| 1.3.6.1.4.1.1166.1.31.25.1.2.1 | ScalarapexPsipConfigTimeApplyChange | read-write | current | The Apply for parameters in apexPsipConfigTime group. This parameter MUST be set to 'apply' in order for other apexPsipConfigTime parameters to take effect. Th… |
| 1.3.6.1.4.1.1166.1.31.25.1.2.2 | ScalarapexPsipConfigTimeDsMonthIn | read-write | current | Configurable month for entering DST. Once written, the change to this parameter will only take immediate effect after apexPsipConfigTimeApplyChange is set to '… |
| 1.3.6.1.4.1.1166.1.31.25.1.2.3 | ScalarapexPsipConfigTimeDsDayIn | read-write | current | Configurable day for entering DST. Once written, the change to this parameter will only take immediate effect after apexPsipConfigTimeApplyChange is set to 'ap… |
| 1.3.6.1.4.1.1166.1.31.25.1.2.4 | ScalarapexPsipConfigTimeDsHourIn | read-write | current | Configurable hour for entering DST. Once written, the change to this parameter will only take immediate effect after apexPsipConfigTimeApplyChange is set to 'a… |
| 1.3.6.1.4.1.1166.1.31.25.1.2.5 | ScalarapexPsipConfigTimeDsMonthOut | read-write | current | Configurable month for exiting DST. Once written, the change to this parameter will only take immediate effect after apexPsipConfigTimeApplyChange is set to 'a… |
| 1.3.6.1.4.1.1166.1.31.25.1.2.6 | ScalarapexPsipConfigTimeDsDayOut | read-write | current | Configurable day for exiting DST. Once written, the change to this parameter will only take immediate effect after apexPsipConfigTimeApplyChange is set to 'app… |
| 1.3.6.1.4.1.1166.1.31.25.1.2.7 | ScalarapexPsipConfigTimeDsHourOut | read-write | current | Configurable hour for exiting DST. Once written, the change to this parameter will only take immediate effect after apexPsipConfigTimeApplyChange is set to 'ap… |
| 1.3.6.1.4.1.1166.1.31.25.2 | NodeapexPsipStatus | |||
| 1.3.6.1.4.1.1166.1.31.25.2.1 | NodeapexPsipStatusGeneral | |||
| 1.3.6.1.4.1.1166.1.31.25.2.2 | TableapexPsipStatusInputTable | not-accessible | current | The following table contains a list of messages that are being extracted from the input side. |
| 1.3.6.1.4.1.1166.1.31.25.2.2.1 | RowapexPsipStatusInputEntry | not-accessible | current | PSIP Table Entry. |
| 1.3.6.1.4.1.1166.1.31.25.2.2.1.1 | ColumnapexPsipStatusInputIndex | not-accessible | current | Indicates the input index for which this message applies. |
| 1.3.6.1.4.1.1166.1.31.25.2.2.1.2 | ColumnapexPsipStatusInputPid | not-accessible | current | Indicates the PID that this message is contained in. |
| 1.3.6.1.4.1.1166.1.31.25.2.2.1.3 | ColumnapexPsipStatusInputMessageType | not-accessible | current | Indicates the PSIP message type. 199 - MGT 200 - TVCT 201 - CVCT 203 - EIT 202 - RRT 205 - STT |
| 1.3.6.1.4.1.1166.1.31.25.2.2.1.4 | ColumnapexPsipStatusInputSourceId | not-accessible | current | Indicates the Source Id of EIT tables. When a message is not specifically related to a program, this value is 0. |
| 1.3.6.1.4.1.1166.1.31.25.2.2.1.5 | ColumnapexPsipStatusInputSegment | not-accessible | current | Indicates the segment number of this message. Otherwise this is 0. |
| 1.3.6.1.4.1.1166.1.31.25.2.2.1.6 | ColumnapexPsipStatusInputPart | not-accessible | current | Since a message can be 4096 bytes long the message may divided into parts. Each part of the message is indexed using this index. |
| 1.3.6.1.4.1.1166.1.31.25.2.2.1.7 | ColumnapexPsipStatusInputBody | read-only | current | Raw ASCII hex of the PSIP message. |
| 1.3.6.1.4.1.1166.1.31.25.2.2.1.8 | ColumnapexPsipStatusInputGpsTime | read-only | current | The GPS time when the PSIP message was added to the table. |
| 1.3.6.1.4.1.1166.1.31.25.2.2.1.9 | ColumnapexPsipStatusInputInfo | read-only | current | Comma-separated string showing Input Interface, UDP port, Multicast IP, and Source IP for this PSIP message. |
| 1.3.6.1.4.1.1166.1.31.25.2.3 | TableapexPsipStatusOutputTable | not-accessible | current | The following table contains a list of messages that are being inserted to the output side of the apex. |
| 1.3.6.1.4.1.1166.1.31.25.2.3.1 | RowapexPsipStatusOutputEntry | not-accessible | current | PSIP Table Entry. |
| 1.3.6.1.4.1.1166.1.31.25.2.3.1.1 | ColumnapexPsipStatusOutputIndex | not-accessible | current | Indicates the Output index for which this message applies. This is the Output Transport Stream number (1..48). |
| 1.3.6.1.4.1.1166.1.31.25.2.3.1.2 | ColumnapexPsipStatusOutputPid | not-accessible | current | Indicates the PID that this message is contained in. |
| 1.3.6.1.4.1.1166.1.31.25.2.3.1.3 | ColumnapexPsipStatusOutputMessageType | not-accessible | current | Indicates the PSIP message type. 199 - MGT 200 - TVCT 201 - CVCT 203 - EIT 202 - RRT 205 - STT |
| 1.3.6.1.4.1.1166.1.31.25.2.3.1.4 | ColumnapexPsipStatusOutputSourceId | not-accessible | current | Indicates the Source Id of EIT tables. When a message is not specifically related to a program, this value is 0. |
| 1.3.6.1.4.1.1166.1.31.25.2.3.1.5 | ColumnapexPsipStatusOutputSegment | not-accessible | current | Indicates the segment number of this message. Otherwise this is 0. |
| 1.3.6.1.4.1.1166.1.31.25.2.3.1.6 | ColumnapexPsipStatusOutputPart | not-accessible | current | Since a message can be 4096 bytes long the message may divided into parts. Each part of the message is indexed using this index. |
| 1.3.6.1.4.1.1166.1.31.25.2.3.1.7 | ColumnapexPsipStatusOutputBody | read-only | current | Raw ASCII hex of the PSIP message. |
| 1.3.6.1.4.1.1166.1.31.25.2.3.1.8 | ColumnapexPsipStatusOutputGpsTime | read-only | current | The GPS time when the PSIP message was added to the table. |
| 1.3.6.1.4.1.1166.1.31.25.2.4 | TableapexPsipStatusServiceTable | not-accessible | current | The following table shows the PSIP status per service. For each service, the service number, the Output Transport Stream number, its PSIP state and its source … |
| 1.3.6.1.4.1.1166.1.31.25.2.4.1 | RowapexPsipStatusServiceEntry | not-accessible | current | PSIP Status Table Entry per service. |
| 1.3.6.1.4.1.1166.1.31.25.2.4.1.1 | ColumnapexPsipStatusServiceIndex | not-accessible | current | Output Program Table Index. |
| 1.3.6.1.4.1.1166.1.31.25.2.4.1.2 | ColumnapexPsipStatusServiceNum | read-only | current | Current Output Service Number. |
| 1.3.6.1.4.1.1166.1.31.25.2.4.1.3 | ColumnapexPsipStatusServiceOutputTs | read-only | current | Current Output Transport Stream of this service. |
| 1.3.6.1.4.1.1166.1.31.25.2.4.1.4 | ColumnapexPsipStatusServiceState | read-only | current | Current program PSIP state. |
| 1.3.6.1.4.1.1166.1.31.25.2.4.1.5 | ColumnapexPsipStatusServiceSourceId | read-only | current | Current PSIP Program Source Id. |
| 1.3.6.1.4.1.1166.1.31.26 | NodeapexPreencryption | |||
| 1.3.6.1.4.1.1166.1.31.26.1 | NodeapexPreencryptionConfig | |||
| 1.3.6.1.4.1.1166.1.31.26.1.1 | NodeapexPreencryptionConfigGeneral | |||
| 1.3.6.1.4.1.1166.1.31.26.1.1.1 | ScalarapexSupportPreencryptedSimulcrypt | read-write | current | Allows to configure the APEX to support services pre-encrypted with Simulcrypt. All the CA descriptors present in the input PMT will be copied to the output PM… |
| 1.3.6.1.4.1.1166.1.31.27 | NodeapexOutputAncillaryPid | |||
| 1.3.6.1.4.1.1166.1.31.27.1 | NodeapexOutputAncillaryPidConfig | |||
| 1.3.6.1.4.1.1166.1.31.27.1.1 | NodeapexOutputAncillaryPidConfigGeneral | |||
| 1.3.6.1.4.1.1166.1.31.27.2 | NodeapexOutputAncillaryPidStatus | |||
| 1.3.6.1.4.1.1166.1.31.27.2.1 | NodeapexOutputAncillaryPidStatusGeneral | |||
| 1.3.6.1.4.1.1166.1.31.27.2.1.1 | ScalarapexOutputAncillaryPidBitrateSamplePeriod | read-only | current | Sample Period for Output Ancillary PID bitrate collection. This parameter indicates the length of time in the unit of milliseconds the TS packets are collected… |
| 1.3.6.1.4.1.1166.1.31.27.2.2 | TableapexOutputAncillaryPidStatusTable | not-accessible | current | This table shows the status of input ancillary PID to output ancillary PID mappings which are configured through either apexPidMapTable or apexBulkPidMapTable.… |
| 1.3.6.1.4.1.1166.1.31.27.2.2.1 | RowapexOutputAncillaryPidStatusEntry | not-accessible | current | Output Ancillary PID Status Table Entry. As 'apexBulkPidMapTable' maps the same PID to multiple output transport streams, then for each selected OTSs a separat… |
| 1.3.6.1.4.1.1166.1.31.27.2.2.1.1 | ColumnapexOutputAncillaryPidIndex | not-accessible | current | Output Ancillary PID Status Table Index. |
| 1.3.6.1.4.1.1166.1.31.27.2.2.1.2 | ColumnapexOutputAncillaryPidInputTsNum | read-only | current | This input TS number points the index in the 'apexInputTsStatTable'. The index will be used to retrieve the input TS details like Input Interface, UDP port, Mu… |
| 1.3.6.1.4.1.1166.1.31.27.2.2.1.3 | ColumnapexOutputAncillaryPidInputPid | read-only | current | This input ancillary PID will be extracted from the input TS pointed by the 'apexOutputAncillaryPidInputTsNum'. |
| 1.3.6.1.4.1.1166.1.31.27.2.2.1.4 | ColumnapexOutputAncillaryPidOutputTsNum | read-only | current | Output Transport Stream Number to which the Input ancillary PID is routed. |
| 1.3.6.1.4.1.1166.1.31.27.2.2.1.5 | ColumnapexOutputAncillaryPidOutputPid | read-only | current | Output Ancillary PID. |
| 1.3.6.1.4.1.1166.1.31.27.2.2.1.6 | ColumnapexOutputAncillaryPidRoutingStatus | read-only | current | Ancillary PID Routing Status. The list of status information is mentioned below. Not Defined - When a PID is mapped, but not activated. Successfully multiplexi… |
| 1.3.6.1.4.1.1166.1.31.27.2.2.1.7 | ColumnapexOutputAncillaryPidAverageBitrate | read-only | current | Bitrate is measured for the sample period 'apexOutputAncillaryPidBitrateSamplePeriod'. This parameter contains the average bitrate, calculated from the samples… |
| 1.3.6.1.4.1.1166.1.31.28 | NodeapexUls | |||
| 1.3.6.1.4.1.1166.1.31.28.1 | NodeapexUlsConfig | |||
| 1.3.6.1.4.1.1166.1.31.28.1.1 | NodeapexUlsConfigGeneral | |||
| 1.3.6.1.4.1.1166.1.31.28.1.1.1 | ScalarapexUlsConfigGenerateRequest | read-write | current | The Apply for generating ULS Feature Requests. This parameter MUST be set to 'apply' in order for apexUlsConfigMcSimChannelsRequest to take effect. This parame… |
| 1.3.6.1.4.1.1166.1.31.28.1.1.2 | ScalarapexUlsConfigValidateResponse | read-write | current | The Apply for validating ULS Feature Response. This parameter MUST be set to 'apply' in order for ULS-generated feature key file to be submitted. This paramete… |
| 1.3.6.1.4.1.1166.1.31.28.1.1.3 | ScalarapexUlsConfigCommitNewFeatures | read-write | current | The Apply for committing ULS feature Keys. This parameter MUST be set to 'apply' in order for the validated feature keys to be committed. @Config(config=no, re… |
| 1.3.6.1.4.1.1166.1.31.28.1.2 | NodeapexUlsConfigMcSimFeatures | |||
| 1.3.6.1.4.1.1166.1.31.28.1.2.1 | ScalarapexUlsConfigMcSimChannelsRequest | read-write | current | Number of MediaCipher Simulcrypt channels, being requested in this feature. @Config(config=no, reboot=no) @Commit(param=apexUlsConfigGenerateRequest , value=2) |
| 1.3.6.1.4.1.1166.1.31.28.2 | NodeapexUlsStatus | |||
| 1.3.6.1.4.1.1166.1.31.28.2.1 | NodeapexUlsStatusGeneral | |||
| 1.3.6.1.4.1.1166.1.31.28.2.1.1 | ScalarapexUlsStatusGenerateRequestText | read-only | current | When apexUlsConfigGenerateRequest is set to applyNotInProgressInvalidData this entry may contain a text description of what was wrong with the data. This entry… |
| 1.3.6.1.4.1.1166.1.31.28.2.1.2 | ScalarapexUlsStatusValidateResponseText | read-only | current | When apexUlsConfigValidateResponse is set to applyNotInProgressInvalidData this entry may contain a text description of what was wrong with the data. This entr… |
| 1.3.6.1.4.1.1166.1.31.28.2.1.3 | ScalarapexUlsStatusCommitNewFeaturesText | read-only | current | When apexUlsConfigCommitNewFeatures is set to applyNotInProgressInvalidData this entry may contain a text description of what was wrong with the data. This ent… |
| 1.3.6.1.4.1.1166.1.31.28.2.2 | NodeapexUlsStatusMcSimFeatures | |||
| 1.3.6.1.4.1.1166.1.31.28.2.2.1 | ScalarapexUlsStatusMcSimChannelsCurrent | read-only | current | Number of MediaCipher Simulcrypt channels, currently allowed in this feature. |
| 1.3.6.1.4.1.1166.1.31.28.2.2.2 | ScalarapexUlsStatusMcSimChannelsInUse | read-only | current | Number of MediaCipher Simulcrypt channels, in use. |
| 1.3.6.1.4.1.1166.1.31.28.2.2.3 | ScalarapexUlsStatusMcSimChannelsMax | read-only | current | Maximum number of MediaCipher Simulcrypt channels allowed to be used, even if the license provides for more. |
| 1.3.6.1.4.1.1166.1.31.29 | NodeapexSimulcryptEcmgInfo | |||
| 1.3.6.1.4.1.1166.1.31.29.1 | NodeapexSimulcryptEcmgStatus | |||
| 1.3.6.1.4.1.1166.1.31.29.1.4 | TableapexSimulcryptEcmgStatusTable | not-accessible | current | Table of Rds2 Events. The index apexSimulcryptEcmgProgramIndex matches the row index in apexManualRouteTable. |
| 1.3.6.1.4.1.1166.1.31.29.1.4.1 | RowapexSimulcryptEcmgStatusEntry | not-accessible | current | Rds2 Events Table Entry. |
| 1.3.6.1.4.1.1166.1.31.29.1.4.1.1 | ColumnapexSimulcryptEcmgProgramIndex | not-accessible | current | apexSimulcryptEcmgProgramIndex is the last 10 bits of apexOutputProgramEcmServiceId from apexOutputProgramTable. |
| 1.3.6.1.4.1.1166.1.31.29.1.4.1.2 | ColumnapexOutputProgramCAS1EcmgChannel | read-only | current | The index into the simulcryptEcmgStatChannelTable for the first CAS system. This is applicable only when Simulcrypt is enabled. |
| 1.3.6.1.4.1.1166.1.31.29.1.4.1.3 | ColumnapexOutputProgramCAS1EcmgStream | read-only | current | This combined with apexOutputProgramCAS1EcmgChannel gives the index into simulcryptEcmgStatStreamTable for the first CAS system. This is applicable only when S… |
| 1.3.6.1.4.1.1166.1.31.29.1.4.1.4 | ColumnapexOutputProgramCAS2EcmgChannel | read-only | current | The index into the simulcryptEcmgStatChannelTable for the second CAS system. This is applicable only when Simulcrypt is enabled. |
| 1.3.6.1.4.1.1166.1.31.29.1.4.1.5 | ColumnapexOutputProgramCAS2EcmgStream | read-only | current | This combined with apexOutputProgramCAS2EcmgChannel gives the index into simulcryptEcmgStatStreamTable for the second CAS system. This is applicable only when … |
| 1.3.6.1.4.1.1166.1.31.29.1.4.1.6 | ColumnapexOutputProgramCAS3EcmgChannel | read-only | current | The index into the simulcryptEcmgStatChannelTable for the third CAS system. This is applicable only when Simulcrypt is enabled. |
| 1.3.6.1.4.1.1166.1.31.29.1.4.1.7 | ColumnapexOutputProgramCAS3EcmgStream | read-only | current | This combined with apexOutputProgramCAS3EcmgChannel gives the index into simulcryptEcmgStatStreamTable for the third CAS system. This is applicable only when S… |
| 1.3.6.1.4.1.1166.1.31.29.1.4.1.8 | ColumnapexOutputProgramCAS4EcmgChannel | read-only | current | The index into the simulcryptEcmgStatChannelTable for the fourth CAS system. This is applicable only when Simulcrypt is enabled. |
| 1.3.6.1.4.1.1166.1.31.29.1.4.1.9 | ColumnapexOutputProgramCAS4EcmgStream | read-only | current | This combined with apexOutputProgramCAS4EcmgChannel gives the index into simulcryptEcmgStatStreamTable for the fourth CAS system. This is applicable only when … |
| 1.3.6.1.4.1.1166.1.31.29.1.4.1.10 | ColumnapexOutputProgramCAS5EcmgChannel | read-only | current | The index into the simulcryptEcmgStatChannelTable for the fifth CAS system. This is applicable only when Simulcrypt is enabled. |
| 1.3.6.1.4.1.1166.1.31.29.1.4.1.11 | ColumnapexOutputProgramCAS5EcmgStream | read-only | current | This combined with apexOutputProgramCAS5EcmgChannel gives the index into simulcryptEcmgStatStreamTable for the fifth CAS system. This is applicable only when S… |
| 1.3.6.1.4.1.1166.1.31.29.1.4.1.12 | ColumnapexOutputProgramCAS6EcmgChannel | read-only | current | The index into the simulcryptEcmgStatChannelTable for the sixth CAS system. This is applicable only when Simulcrypt is enabled. |
| 1.3.6.1.4.1.1166.1.31.29.1.4.1.13 | ColumnapexOutputProgramCAS6EcmgStream | read-only | current | This combined with apexOutputProgramCAS6EcmgChannel gives the index into simulcryptEcmgStatStreamTable for the sixth CAS system. This is applicable only when S… |
| 1.3.6.1.4.1.1166.1.31.29.1.4.1.14 | ColumnapexOutputProgramCAS7EcmgChannel | read-only | current | The index into the simulcryptEcmgStatChannelTable for the seventh CAS system. This is applicable only when Simulcrypt is enabled. |
| 1.3.6.1.4.1.1166.1.31.29.1.4.1.15 | ColumnapexOutputProgramCAS7EcmgStream | read-only | current | This combined with apexOutputProgramCAS7EcmgChannel gives the index into simulcryptEcmgStatStreamTable for the seventh CAS system. This is applicable only when… |
| 1.3.6.1.4.1.1166.1.31.29.1.4.1.16 | ColumnapexOutputProgramCAS8EcmgChannel | read-only | current | The index into the simulcryptEcmgStatChannelTable for the eigth CAS system. This is applicable only when Simulcrypt is enabled. |
| 1.3.6.1.4.1.1166.1.31.29.1.4.1.17 | ColumnapexOutputProgramCAS8EcmgStream | read-only | current | This combined with apexOutputProgramCAS8EcmgChannel gives the index into simulcryptEcmgStatStreamTable for the eigth CAS system. This is applicable only when S… |
| 1.3.6.1.4.1.1166.1.31.30 | NodeapexMcSim | |||
| 1.3.6.1.4.1.1166.1.31.30.1 | NodeapexMcSimConfig | |||
| 1.3.6.1.4.1.1166.1.31.30.1.1 | NodeapexMcSimConfigGeneral | |||
| 1.3.6.1.4.1.1166.1.31.30.1.1.1 | ScalarapexMcSimEnableDacId | read-write | current | This enables prepending the DAC ID to the Access Criteria in the SCS<=>ECMG Control Word Provision request. Once written, the change to this parameter will onl… |
| 1.3.6.1.4.1.1166.1.31.30.1.1.2 | ScalarapexMcSimDacId | read-write | current | The DAC ID to be prepended to the Access Criteria in the SCS<=>ECMG Control Word Provision request. Once written, the change to this parameter will only take i… |
| 1.3.6.1.4.1.1166.1.31.30.1.1.3 | ScalarapexMcSimConfigApplyChange | read-write | current | The Apply for MC SimulCrypt Configuration. This parameter MUST be set to 'apply' in order for the Queuing Device ID, or DAC ID to take effect in the APEX. This… |
| 1.3.6.1.4.1.1166.1.31.30.1.1.4 | ScalarapexMcSimConfigInvalidApplyText | read-only | current | When corresponding apexMcSimEnableApplyChange is set to 'applyNotInProgressInvalidData' this entry may contain a text description of why MC Simulcrypt was not … |
| 1.3.6.1.4.1.1166.1.31.100 | NodeapexAlarms | |||
| 1.3.6.1.4.1.1166.1.31.100.8000 | ScalarapexAlarmHardwareFault | read-only | current | Indicates that a Hardware related error occurred. Examples include missing or uncommunicative HW, failures in initialization of HW, and failures to configure H… |
| 1.3.6.1.4.1.1166.1.31.100.8001 | ScalarapexAlarmInvalidInitData | read-only | current | Set when invalid Initialization data (ini files) is encountered. |
| 1.3.6.1.4.1.1166.1.31.100.8002 | ScalarapexAlarmTemperatureFault | read-only | current | 'critical' indicates one or more temperature sensors is reporting a high temperature condition. |
| 1.3.6.1.4.1.1166.1.31.100.8003 | ScalarapexAlarmFanFault | read-only | current | 'major' indicates one or more fans has reduced RPM readings. |
| 1.3.6.1.4.1.1166.1.31.100.8004 | ScalarapexAlarmPowerFault | read-only | current | Power Supply Fault Alarm. 'warning' indicates power supply not compatible (apexPsStatusInstalled). 'major' indicates power supply or fan only module) removed (… |
| 1.3.6.1.4.1.1166.1.31.100.8020 | ScalarapexAlarmGbeLossOfPhysicalInput | read-only | current | Loss of Physical Gigabit Ethernet Input Alarm. 'critical' indicates that one or more physical interfaces that are configured as enabled to receive input have a… |
| 1.3.6.1.4.1.1166.1.31.100.8021 | ScalarapexAlarmGbeBufferFullness | read-only | current | Gigabit Ethernet Frame Buffer Fullness Alarm. This alarm is used to inform the user when one or more Gigabit Ethernet Frame buffers are about to or have overfl… |
| 1.3.6.1.4.1.1166.1.31.100.8022 | ScalarapexAlarmGbeInputStreamLowBitRate | read-only | current | Gigabit Ethernet Input Stream Low Bit Rate Alarm. This alarm is used to inform the user when one or more Gigabit Ethernet Input Streams as configured in apexMa… |
| 1.3.6.1.4.1.1166.1.31.100.8023 | ScalarapexAlarmGbeInputStreamHighBitRate | read-only | current | Gigabit Ethernet Input Stream High Bit Rate Alarm. This alarm is used to inform the user when one or more Gigabit Ethernet Input Streams as configured in apexM… |
| 1.3.6.1.4.1.1166.1.31.100.8024 | ScalarapexAlarmGbeMptsRedundPrimaryThreshold | read-only | current | Gigabit Ethernet Input MPTS Redundant Primary Stream Below Threshold Alarm. This alarm is used to inform the user when one or more Gigabit Ethernet Input Strea… |
| 1.3.6.1.4.1.1166.1.31.100.8025 | ScalarapexAlarmGbeMptsRedundFailOver | read-only | current | Gigabit Ethernet Input MPTS Redundant Fail Over Alarm. This alarm is used to inform the user when one or more Gigabit Ethernet Input Streams configured in apex… |
| 1.3.6.1.4.1.1166.1.31.100.8026 | ScalarapexAlarmServiceInError | read-only | current | Alarm Service In Error. 'major' indicates that one or more services is in error (unable to fully continue processing). However, this is only for very specific … |
| 1.3.6.1.4.1.1166.1.31.100.8027 | ScalarapexAlarmGbeLossOfInputStream | read-only | current | Loss of Gbe Input Stream Alarm. This alarm is used to inform the user when one or more Gigabit Ethernet Input Streams is missing. A missing input stream is det… |
| 1.3.6.1.4.1.1166.1.31.100.8028 | ScalarapexAlarmGigeToHostCommFault | read-only | current | Loss of Communications from Gige to Host Alarm. This alarm is used to inform the user when the Host processor is no longer receiving periodic status messages f… |
| 1.3.6.1.4.1.1166.1.31.100.8029 | ScalarapexAlarmGbeInterfaceRedundFailOver | read-only | current | Gigabit Ethernet Interface Redundant Fail Over Alarm. This alarm is used to inform the user when one or more Gigabit Ethernet interfaces have Failed Over to th… |
| 1.3.6.1.4.1.1166.1.31.100.8030 | ScalarapexAlarmLossOfInputAncillaryPid | read-only | current | Loss of input ancillary PID Alarm. This alarm is raised when one or more input ancillary PID(s) is(are) missing in the input transport streams. The APEX monito… |
| 1.3.6.1.4.1.1166.1.31.100.8031 | ScalarapexAlarmGbeInputStreamPacketDrop | read-only | current | Gigabit Ethernet Input Stream Packet Drop Alarm. This alarm is used to inform the user when one or more Gigabit Ethernet Input Streams have a dropped packet co… |
| 1.3.6.1.4.1.1166.1.31.100.8040 | ScalarapexAlarmOutputUtilizationFault | read-only | current | Output Transport Stream Utilization Threshold Alarm. 'minor' when apexOutputTsUtilMonAlarmThreshold is met or exceeded for apexOutputTsUtilMonSetAlarmDelay for… |
| 1.3.6.1.4.1.1166.1.31.100.8041 | ScalarapexAlarmOutputOverflow | read-only | current | Output Transport Stream Overflow Alarm. 'critical' when apexOutputTsUtilizOverflow occurs for an OTS. The alarm will clear when OTS no longer in overflow. |
| 1.3.6.1.4.1.1166.1.31.100.8042 | ScalarapexAlarmQamModuleFault | read-only | current | QAM Port Fault Alarm. 'major' when apexQamModuleStatError occurs when all QAM channels on the QAM Module have apexQamChanStatActive of not 'active'. 'critical'… |
| 1.3.6.1.4.1.1166.1.31.100.8043 | ScalarapexAlarmQamRfPortFault | read-only | current | QAM RF Port Fault Alarm. 'major' when power voltage or output RF level error occurs on the RF Port. 'critical' when clock, PLL, or data sync error occurs on th… |
| 1.3.6.1.4.1.1166.1.31.100.8044 | ScalarapexAlarmQamChannelFault | read-only | current | QAM Channel Fault Alarm. 'critical' when any or all of the QAM Channel errors enumerated in apexQamChanStatError occur on a QAM channel. The alarm will clear a… |
| 1.3.6.1.4.1.1166.1.31.100.8045 | ScalarapexAlarmQamRfRedundFailOver | read-only | current | QAM RF Redundancy Fail Over Alarm. 'major' when the backup QAM RF Port status is 'active' (apexQamRfRedundStatusBackupPort). This occurs when a primary QAM RF … |
| 1.3.6.1.4.1.1166.1.31.100.8046 | ScalarapexAlarmQamRfRedundMismatch | read-only | current | QAM RF Redundancy Mismatch Alarm. 'warning' when channels could be lost on QAM RF Fail Over to backup or on Switch Back to primary. Refer to apexQamRfRedundSta… |
| 1.3.6.1.4.1.1166.1.31.100.8047 | ScalarapexAlarmQamModuleRemovalFault | read-only | current | QAM Module Removal Fault Alarm. 'critical' when apexQamModuleStatError occurs when any QAM channels on the QAM Module have apexQamChanStatActive of 'active'. T… |
| 1.3.6.1.4.1.1166.1.31.100.8050 | ScalarapexAlarmRtspControllerCommFault | read-only | current | RTSP Controller Communication Fault. 'major' when the RTSP Controller is experiencing a communication fault. The alarm will clear when connection is restored t… |
| 1.3.6.1.4.1.1166.1.31.100.8060 | ScalarapexAlarmRdsCommFault | read-only | current | RDS Communication Fault. 'major' when experiencing an RDS communication fault. The alarm will clear when RDS connection is restored. |
| 1.3.6.1.4.1.1166.1.31.100.8070 | ScalarapexAlarmRemCommFault | read-only | current | REM Communication Fault. 'major' when experiencing an REM communication fault. The alarm will clear when REM connection is restored. Refer to apexQamRfRedundSt… |
| 1.3.6.1.4.1.1166.1.31.100.8071 | ScalarapexAlarmRemFault | read-only | current | REM Fault. 'warning' when REM is reporting a 0x05 error code. 'major' when error received from REM (other than 0x05) or REM is reporting incorrect switch confi… |
| 1.3.6.1.4.1.1166.1.31.100.8080 | ScalarapexAlarmDepiControlConnectionFault | read-only | current | DEPI Control connection setup Fault. |
| 1.3.6.1.4.1.1166.1.31.100.8081 | ScalarapexAlarmDepiSessionSetupFault | read-only | current | DEPI Session Setup Fault. |
| 1.3.6.1.4.1.1166.1.31.100.8082 | ScalarapexAlarmDtiSyncLossFault | read-only | current | EQAM lost SYNC with the DTI Server. |
| 1.3.6.1.4.1.1166.1.31.100.8090 | ScalarapexAlarmChassisRedundancyPrimaryFailover | read-only | current | Generated when the primary active APEX fails over to the secondary standby unit. Trap tells if failover is operator induced, or automatic because of a fault. M… |
| 1.3.6.1.4.1.1166.1.31.100.8091 | ScalarapexAlarmChassisRedundancySecondaryFailover | read-only | current | Generated when the secondary active APEX fails over to the primary standby unit. Trap tells if failover is operator induced, or automatic because of a fault. M… |
| 1.3.6.1.4.1.1166.1.31.100.8092 | ScalarapexAlarmChassisRedundancyAvailabilityFault | read-only | current | Generated when redundancy status is unavailable (except for link loss) configuration not synchronized secondary in fault state Cleared when redundancy status i… |
| 1.3.6.1.4.1.1166.1.31.100.8093 | ScalarapexAlarmChassisRedundancyLinkFault | read-only | current | Generated when ENET2 link is lost Cleared when ENET 2 link is present or redundancy disabled. |
| 1.3.6.1.4.1.1166.1.31.100.8094 | ScalarapexAlarmChassisRedundancyConfigurationFault | read-only | current | Generated when primary APEX receives heartbeat from another primary. Critical if APEX was in active state (sourcing broadcast content) Major if APEX was in sta… |
| 1.3.6.1.4.1.1166.1.31.101 | NodeapexEvents | |||
| 1.3.6.1.4.1.1166.1.31.101.8100 | ScalarapexEventEmUserLoginFailed | read-only | current | Event to indicate APEX EM User login failed 5 times. |
| 1.3.6.1.4.1.1166.1.31.101.8101 | ScalarapexEventQamModuleUpgraded | read-only | current | Event to indicate a QAM Module has been upgraded from 2x4 to 2x8 channel capability. |
| 1.3.6.1.4.1.1166.1.31.101.8102 | ScalarapexEventSnmpCommunityStringChanged | read-only | current | Event to indicate that the read/read-write SNMP community strings are changed Trap description is given in trapSnmpCommunityStringChanged |
| 1.3.6.1.4.1.1166.1.31.101.8103 | ScalarapexEventEasMessageNotReceived | read-only | current | Generated when the EAS message is not received for the amount of time configured by the object 'apexEasMessageReceiveTimeoutDuration' |
| 1.3.6.1.4.1.1166.1.31.101.8104 | ScalarapexEventLossOfInputAncillaryPid | read-only | current | Event to indicate that the input PID has not received. This event is sent when one or more input ancillary PID(s) is(are) missing in the input transport stream… |
| 1.3.6.1.4.1.1166.1.31.101.8110 | ScalarapexEventChassisRedunPrimaryForceFailover | read-only | obsolete | Generated when the operator forces a failover from the primary, back to the secondary APEX. |
| 1.3.6.1.4.1.1166.1.31.101.8111 | ScalarapexEventChassisRedunSecondaryForceFailover | read-only | obsolete | Generated when the operator forces a failover from the secondary, back to the primary APEX. |
| 1.3.6.1.4.1.1166.1.31.101.8112 | ScalarapexEventChassisRedunFirmwareVersionMismatch | read-only | current | Generated when the primary and secondary APEX firmware versions are mismatched. |
| 1.3.6.1.4.1.1166.1.31.101.8113 | ScalarapexEventChassisRedunQAMVersionMismatch | read-only | current | Generated when the primary and secondary APEX QAM versions are mismatched. |
| 1.3.6.1.4.1.1166.1.31.102 | NodeapexConfigAlarms | |||
| 1.3.6.1.4.1.1166.1.31.102.1 | NodeapexConfAlarmEnable | |||
| 1.3.6.1.4.1.1166.1.31.102.1.8001 | ScalarapexEnableInvalidInitData | read-write | current | This setting enables or disables apexAlarmInvalidInitData. When set to 'enabled' the alarm will operate as described. When set to 'disabled' the alarm will not… |
| 1.3.6.1.4.1.1166.1.31.102.1.8020 | ScalarapexEnableGbeLossOfPhysicalInput | read-write | current | This setting enables or disables apexAlarmGbeLossOfPhysicalInput. When set to 'enabled' the alarm will operate as described. When set to 'disabled' the alarm w… |
| 1.3.6.1.4.1.1166.1.31.102.1.8021 | ScalarapexEnableGbeBufferFullness | read-write | current | This setting enables or disables apexAlarmGbeBufferFullness. When set to 'enabled' the alarm will operate as described. When set to 'disabled' the alarm will n… |
| 1.3.6.1.4.1.1166.1.31.102.1.8022 | ScalarapexEnableGbeInputStreamLowBitRate | read-write | current | This setting enables or disables apexAlarmGbeInputStreamLowBitRate. When set to 'enabled' the alarm will operate as described. When set to 'disabled' the alarm… |
| 1.3.6.1.4.1.1166.1.31.102.1.8023 | ScalarapexEnableGbeInputStreamHighBitRate | read-write | current | This setting enables or disables apexAlarmGbeInputStreamHighBitRate. When set to 'enabled' the alarm will operate as described. When set to 'disabled' the alar… |
| 1.3.6.1.4.1.1166.1.31.102.1.8024 | ScalarapexEnableGbeMptsRedundPrimaryThreshold | read-write | current | This setting enables or disables apexAlarmGbeMptsRedundPrimaryThreshold. When set to 'enabled' the alarm will operate as described. When set to 'disabled' the … |
| 1.3.6.1.4.1.1166.1.31.102.1.8025 | ScalarapexEnableGbeMptsRedundFailOver | read-write | current | This setting enables or disables apexAlarmGbeMptsRedundFailOver. When set to 'enabled' the alarm will operate as described. When set to 'disabled' the alarm wi… |
| 1.3.6.1.4.1.1166.1.31.102.1.8026 | ScalarapexEnableServiceInError | read-write | current | This setting enables or disables apexAlarmServiceInError. When set to 'enabled' the alarm will operate as described. When set to 'disabled' the alarm will not … |
| 1.3.6.1.4.1.1166.1.31.102.1.8027 | ScalarapexEnableGbeLossOfInputTsFault | read-write | current | This setting enables or disables apexAlarmGbeLossOfInputStream. When set to 'enabled' the alarm will operate as described. When set to 'disabled' the alarm wil… |
| 1.3.6.1.4.1.1166.1.31.102.1.8029 | ScalarapexEnableGbeInterfaceRedundFailOver | read-write | current | This setting enables or disables apexAlarmGbeInterfaceRedundFailOver. When set to 'enabled' the alarm will operate as described. When set to 'disabled' the ala… |
| 1.3.6.1.4.1.1166.1.31.102.1.8030 | ScalarapexEnableLossOfInputAncillaryPid | read-write | current | It enables or disables the alarm 'apexAlarmLossOfInputAncillaryPid'. When set to 'enabled', the alarm will operate as described in the description for 'apexAla… |
| 1.3.6.1.4.1.1166.1.31.102.1.8031 | ScalarapexEnableGbeInputStreamPacketDrop | read-write | current | This setting enables or disables apexAlarmGbeInputStreamPacketDrop. When set to 'enabled' the alarm will operate as described. When set to 'disabled' the alarm… |
| 1.3.6.1.4.1.1166.1.31.102.1.8040 | ScalarapexEnableOutputUtilizationFault | read-write | current | This setting enables or disables apexAlarmOutputUtilizationFault. When set to 'enabled' the alarm will operate as described. When set to 'disabled' the alarm w… |
| 1.3.6.1.4.1.1166.1.31.102.1.8041 | ScalarapexEnableOutputOverflow | read-write | current | This setting enables or disables apexAlarmOutputOverflow. When set to 'enabled' the alarm will operate as described. When set to 'disabled' the alarm will not … |
| 1.3.6.1.4.1.1166.1.31.102.1.8042 | ScalarapexEnableQamModuleFault | read-write | current | This setting enables or disables apexAlarmQamModuleFault. When set to 'enabled' the alarm will operate as described. When set to 'disabled' the alarm will not … |
| 1.3.6.1.4.1.1166.1.31.102.1.8043 | ScalarapexEnableQamRfPortFault | read-write | current | This setting enables or disables apexAlarmQamRfPortFault. When set to 'enabled' the alarm will operate as described. When set to 'disabled' the alarm will not … |
| 1.3.6.1.4.1.1166.1.31.102.1.8044 | ScalarapexEnableQamChannelFault | read-write | current | This setting enables or disables apexAlarmQamChannelFault. When set to 'enabled' the alarm will operate as described. When set to 'disabled' the alarm will not… |
| 1.3.6.1.4.1.1166.1.31.102.1.8045 | ScalarapexEnableQamRfRedundFailOver | read-write | current | This setting enables or disables apexAlarmQamRfRedundFailOver. When set to 'enabled' the alarm will operate as described. When set to 'disabled' the alarm will… |
| 1.3.6.1.4.1.1166.1.31.102.1.8046 | ScalarapexEnableQamRfRedundMismatch | read-write | current | This setting enables or disables apexAlarmQamRfRedundMismatch. When set to 'enabled' the alarm will operate as described. When set to 'disabled' the alarm will… |
| 1.3.6.1.4.1.1166.1.31.102.1.8047 | ScalarapexEnableQamModuleRemovalFault | read-write | current | This setting enables or disables apexAlarmQamModuleRemovalFault. When set to 'enabled' the alarm will operate as described. When set to 'disabled' the alarm wi… |
| 1.3.6.1.4.1.1166.1.31.102.1.8050 | ScalarapexEnableRtspControllerCommFault | read-write | current | This setting enables or disables apexAlarmRtspControllerCommFault. When set to 'enabled' the alarm will operate as described. When set to 'disabled' the alarm … |
| 1.3.6.1.4.1.1166.1.31.102.1.8060 | ScalarapexEnableRdsCommAlarmFault | read-write | current | This setting enables or disables apexAlarmRdsCommFault. When set to 'enabled' the alarm will operate as described. When set to 'disabled' the alarm will not be… |
| 1.3.6.1.4.1.1166.1.31.102.1.8070 | ScalarapexEnableRemCommFault | read-write | current | This setting enables or disables apexAlarmRemCommFault. When set to 'enabled' the alarm will operate as described. When set to 'disabled' the alarm will not be… |
| 1.3.6.1.4.1.1166.1.31.102.1.8071 | ScalarapexEnableRemFault | read-write | current | This setting enables or disables apexAlarmRemFault. When set to 'enabled' the alarm will operate as described. When set to 'disabled' the alarm will not be rep… |
| 1.3.6.1.4.1.1166.1.31.102.1.8080 | ScalarapexEnableDepiControlConnectionFault | read-write | current | This setting enables or disables apexAlarmDepiControlConnectionFault. When set to 'enabled' the alarm will operate as described. When set to 'disabled' the ala… |
| 1.3.6.1.4.1.1166.1.31.102.1.8081 | ScalarapexEnableDepiSessionSetupFault | read-write | current | This setting enables or disables apexAlarmDepiSessionSetupFault. When set to 'enabled' the alarm will operate as described. When set to 'disabled' the alarm wi… |
| 1.3.6.1.4.1.1166.1.31.102.1.8082 | ScalarapexEnableDtiSyncLossFault | read-write | current | This setting enables or disables apexAlarmDtiSyncLossFault. When set to 'enabled' the alarm will operate as described. When set to 'disabled' the alarm will no… |
| 1.3.6.1.4.1.1166.1.31.102.1.8090 | ScalarapexEnableChassisRedundancyPrimaryFailover | read-write | current | This setting enables or disables apexEnableChassisRedundancyPrimaryFailover. When set to 'enabled' the alarm will operate as described. When set to 'disabled' … |
| 1.3.6.1.4.1.1166.1.31.102.1.8091 | ScalarapexEnableChassisRedundancySecondaryFailover | read-write | current | This setting enables or disables apexEnableChassisRedundancySecondaryFailover. When set to 'enabled' the alarm will operate as described. When set to 'disabled… |
| 1.3.6.1.4.1.1166.1.31.102.1.8092 | ScalarapexEnableChassisRedundancyAvailabilityFault | read-write | current | This setting enables or disables apexEnableChassisRedundancyAvailabilityFault. When set to 'enabled' the alarm will operate as described. When set to 'disabled… |
| 1.3.6.1.4.1.1166.1.31.102.1.8093 | ScalarapexEnableChassisRedundancyLinkFault | read-write | current | This setting enables or disables apexEnableChassisRedundancyLinkFault. When set to 'enabled' the alarm will operate as described. When set to 'disabled' the al… |
| 1.3.6.1.4.1.1166.1.31.102.1.8094 | ScalarapexEnableChassisRedundancyConfigurationFault | read-write | current | This setting enables or disables apexEnableChassisRedundancyConfigurationFault. When set to 'enabled' the alarm will operate as described. When set to 'disable… |
| 1.3.6.1.4.1.1166.1.31.102.2 | NodeapexConfAlarmClear | |||
| 1.3.6.1.4.1.1166.1.31.102.2.8001 | ScalarapexClearInvalidInitData | read-write | current | Setting to 'clearAlarm' clears the apexAlarmInvalidInitData. The APEX will set this parameter back to 'clearAlarmNotInProgress' after clearing the alarm. Once … |
| 1.3.6.1.4.1.1166.1.31.200 | NodeapexLogs | |||
| 1.3.6.1.4.1.1166.1.31.200.1 | TableapexHwEventTable | not-accessible | current | Table of Hardware Events that have occurred. Maximum of 100 events will be recorded. |
| 1.3.6.1.4.1.1166.1.31.200.1.1 | RowapexHwEventEntry | not-accessible | current | Hardware Event Table Entry. |
| 1.3.6.1.4.1.1166.1.31.200.1.1.1 | ColumnapexHwEventIndex | not-accessible | current | Index to HW Event table entry. |
| 1.3.6.1.4.1.1166.1.31.200.1.1.2 | ColumnapexHwEventTimeLogged | read-only | current | Time in GPS seconds (apexSystemTime) that this event was logged. |
| 1.3.6.1.4.1.1166.1.31.200.1.1.3 | ColumnapexHwEventAlarmCode | read-only | current | Last number of alarm OID. Can be one of the following: 0 Indicates event is informational and may or may not cause an alarm. 8000 apexAlarmHardwareFault 8002 a… |
| 1.3.6.1.4.1.1166.1.31.200.1.1.4 | ColumnapexHwEventAlarmSeverity | read-only | current | Alarm severity level of this event. |
| 1.3.6.1.4.1.1166.1.31.200.1.1.5 | ColumnapexHwEventData | read-only | current | Additional integer data. When apexHwEventAlarmCode is non-zero, this will be the same as Additional Data 1 as in the trap for the alarm. When apexHwEventAlarmC… |
| 1.3.6.1.4.1.1166.1.31.200.1.1.6 | ColumnapexHwEventDescription | read-only | current | Text description of the event. |
| 1.3.6.1.4.1.1166.1.31.200.2 | TableapexInvalidInitDataTable | not-accessible | current | Table of Invalid Initialization Data Errors. Maximum of 100 errors will be recorded. |
| 1.3.6.1.4.1.1166.1.31.200.2.1 | RowapexInvalidInitDataEntry | not-accessible | current | Invalid Initialization Data Table Entry. |
| 1.3.6.1.4.1.1166.1.31.200.2.1.1 | ColumnapexInvalidInitDataIndex | not-accessible | current | Index to Invalid Initialization Data table entry. |
| 1.3.6.1.4.1.1166.1.31.200.2.1.2 | ColumnapexInvalidInitDataTimeLogged | read-only | current | Time in GPS seconds (apexSystemTime) that this event was logged. |
| 1.3.6.1.4.1.1166.1.31.200.2.1.3 | ColumnapexInvalidInitDataDescription | read-only | current | Text string describing the data error. |
| 1.3.6.1.4.1.1166.1.31.200.3 | TableapexOutputTsEventTable | not-accessible | current | Table of Output Stream events that have occurred. Maximum of 200 events will be recorded. |
| 1.3.6.1.4.1.1166.1.31.200.3.1 | RowapexOutputTsEventEntry | not-accessible | current | Output Stream Error Table Entry. |
| 1.3.6.1.4.1.1166.1.31.200.3.1.1 | ColumnapexOutputTsEventIndex | not-accessible | current | Index to Output Stream Error table. |
| 1.3.6.1.4.1.1166.1.31.200.3.1.2 | ColumnapexOutputTsEventTimeLogged | read-only | current | Time in GPS seconds (apexSystemTime) that this event was logged. |
| 1.3.6.1.4.1.1166.1.31.200.3.1.3 | ColumnapexOutputTsEventAlarmCode | read-only | current | Last number of alarm OID. Can be one of the following: 0 Indicates event is informational and may or may not cause an alarm. 8040 apexAlarmOutputUtilizationFau… |
| 1.3.6.1.4.1.1166.1.31.200.3.1.4 | ColumnapexOutputTsEventAlarmSeverity | read-only | current | Alarm severity level of this event. |
| 1.3.6.1.4.1.1166.1.31.200.3.1.5 | ColumnapexOutputTsEventOutputTsNum | read-only | current | The number of the output transport stream for this event. |
| 1.3.6.1.4.1.1166.1.31.200.3.1.6 | ColumnapexOutputTsEventCurRate | read-only | current | Value of apexOutputTsUtilizCurRate when event occurred. |
| 1.3.6.1.4.1.1166.1.31.200.3.1.7 | ColumnapexOutputTsEventAvgRate | read-only | current | Value of apexOutputTsUtilizAvgRate when event occurred. |
| 1.3.6.1.4.1.1166.1.31.200.3.1.8 | ColumnapexOutputTsEventMinRate | read-only | current | Value of apexOutputTsUtilizMinRate when event occurred. |
| 1.3.6.1.4.1.1166.1.31.200.3.1.9 | ColumnapexOutputTsEventPeakRate | read-only | current | Value of apexOutputTsUtilizPeakRate when event occurred. |
| 1.3.6.1.4.1.1166.1.31.200.3.1.10 | ColumnapexOutputTsEventCurDropPackets | read-only | current | Value of apexOutputTsUtilizCurDropPackets when event occurred. |
| 1.3.6.1.4.1.1166.1.31.200.3.1.11 | ColumnapexOutputTsEventPeakDropPackets | read-only | current | Value of apexOutputTsUtilizPeakDropPackets when event occurred. |
| 1.3.6.1.4.1.1166.1.31.200.3.1.12 | ColumnapexOutputTsEventRollingDropPackets | read-only | current | Value of apexOutputTsUtilizRollingDropPackets when event occurred. |
| 1.3.6.1.4.1.1166.1.31.200.3.1.13 | ColumnapexOutputTsEventTotalDropPackets | read-only | current | Value of apexOutputTsUtilizTotalDropPackets when event occurred. |
| 1.3.6.1.4.1.1166.1.31.200.3.1.14 | ColumnapexOutputTsEventDescription | read-only | current | Text description of the event. Maximum length is 128 characters. |
| 1.3.6.1.4.1.1166.1.31.200.4 | TableapexGbeInputTsEventTable | not-accessible | current | Table of Gigabit Ethernet Input Transport Stream Events that have occurred. Maximum of 100 events will be recorded. |
| 1.3.6.1.4.1.1166.1.31.200.4.1 | RowapexGbeInputTsEventEntry | not-accessible | current | Gigabit Ethernet Input Transport Stream Event Table Entry. |
| 1.3.6.1.4.1.1166.1.31.200.4.1.1 | ColumnapexGbeInputTsEventIndex | not-accessible | current | Index to Gigabit Ethernet Input Transport Stream Event table. |
| 1.3.6.1.4.1.1166.1.31.200.4.1.2 | ColumnapexGbeInputTsEventTimeLogged | read-only | current | Time in GPS seconds (apexSystemTime) that this event was logged. |
| 1.3.6.1.4.1.1166.1.31.200.4.1.3 | ColumnapexGbeInputTsEventAlarmCode | read-only | current | Last number of alarm OID. Can be one of the following: 0 Indicates event is informational and may or may not cause an alarm. 8022 apexAlarmGbeInputStreamLowBit… |
| 1.3.6.1.4.1.1166.1.31.200.4.1.4 | ColumnapexGbeInputTsEventAlarmSeverity | read-only | current | Alarm severity level of this event. |
| 1.3.6.1.4.1.1166.1.31.200.4.1.5 | ColumnapexGbeInputTsEventRedundantConfig | read-only | current | Indicates whether this input transport stream was configured as a primary or secondary at the time of the event. |
| 1.3.6.1.4.1.1166.1.31.200.4.1.6 | ColumnapexGbeInputTsEventGbeInterface | read-only | current | Value of apexInputTsStatPriInputInterface or apexInputTsStatSecInputInterface at the time of the event. |
| 1.3.6.1.4.1.1166.1.31.200.4.1.7 | ColumnapexGbeInputTsEventUdpPort | read-only | current | Value of apexInputTsStatPriInputUdp or apexInputTsStatSecInputUdp at the time of the event. |
| 1.3.6.1.4.1.1166.1.31.200.4.1.8 | ColumnapexGbeInputTsEventMulticastIp | read-only | current | Value of apexInputTsStatPriInputMulticastIp or apexInputTsStatSecInputMulticastIp at the time of the event. |
| 1.3.6.1.4.1.1166.1.31.200.4.1.9 | ColumnapexGbeInputTsEventSourceIp | read-only | current | Value of apexInputTsStatPriInputSourceIp or apexInputTsStatSecInputSourceIp at the time of the event. |
| 1.3.6.1.4.1.1166.1.31.200.4.1.10 | ColumnapexGbeInputTsEventInputTsState | read-only | current | Value of apexInputTsStatPriState or apexInputTsStatSecState at the time of the event. For threshold or fail over events, the state reported is always the Prima… |
| 1.3.6.1.4.1.1166.1.31.200.4.1.11 | ColumnapexGbeInputTsEventRateCompareType | read-only | current | Comparison type at time of event (stream or data). |
| 1.3.6.1.4.1.1166.1.31.200.4.1.12 | ColumnapexGbeInputTsEventSamplingPeriod | read-only | current | Sample period in seconds of the stream and data counts reported. Using the sample period and the stream or data counts, the actual input rate at the time of th… |
| 1.3.6.1.4.1.1166.1.31.200.4.1.13 | ColumnapexGbeInputTsEventPriCurStreamCount | read-only | current | Current Primary input stream Packet Count at the time of the event. This is the number of packets received, including Nulls, during the sample period defined i… |
| 1.3.6.1.4.1.1166.1.31.200.4.1.14 | ColumnapexGbeInputTsEventPriCurDataCount | read-only | current | Current Primary input data Packet Count at the time of the event. This is the number of data packets received (non-Nulls), during the sample period defined in … |
| 1.3.6.1.4.1.1166.1.31.200.4.1.15 | ColumnapexGbeInputTsEventSecCurStreamCount | read-only | current | Current Secondary input stream Packet Count at the time of the event. This is the number of packets received, including Nulls, during the sample period defined… |
| 1.3.6.1.4.1.1166.1.31.200.4.1.16 | ColumnapexGbeInputTsEventSecCurDataCount | read-only | current | Current Secondary input data Packet Count at the time of the event. This is the number of data packets received (non-Nulls), during the sample period defined i… |
| 1.3.6.1.4.1.1166.1.31.200.4.1.17 | ColumnapexGbeInputTsEventDescription | read-only | current | Text description of the event. Maximum length is 128 characters. |
| 1.3.6.1.4.1.1166.1.31.200.5 | TableapexRtspEventTable | not-accessible | current | Table of RTSP Events that have occurred. Maximum of 100 events will be recorded. |
| 1.3.6.1.4.1.1166.1.31.200.5.1 | RowapexRtspEventEntry | not-accessible | current | RTSP Event Table Entry. |
| 1.3.6.1.4.1.1166.1.31.200.5.1.1 | ColumnapexRtspEventIndex | not-accessible | current | Index to RTSP Event table entry. |
| 1.3.6.1.4.1.1166.1.31.200.5.1.2 | ColumnapexRtspEventTimeLogged | read-only | current | Time in GPS seconds (apexSystemTime) that this event was logged. |
| 1.3.6.1.4.1.1166.1.31.200.5.1.3 | ColumnapexRtspEventControllerIp | read-only | current | IP address of the RTSP Controller associated with this event. Value will be zero if the event is not associated with a specific controller. Refer to apexRtspEv… |
| 1.3.6.1.4.1.1166.1.31.200.5.1.4 | ColumnapexRtspEventSessionCount | read-only | current | Number of active sessions for the RTSP Controller associated with this event. Value will be total count of all sessions for all controllers if the event is not… |
| 1.3.6.1.4.1.1166.1.31.200.5.1.5 | ColumnapexRtspEventSourceDescription | read-only | current | Text description of the source of the event. May indicate a controller identifier or an APEX application process. |
| 1.3.6.1.4.1.1166.1.31.200.5.1.6 | ColumnapexRtspEventDescription | read-only | current | Text description of the event. |
| 1.3.6.1.4.1.1166.1.31.200.6 | TableapexMappingErrorTable | not-accessible | current | Table of program, ancillary PID, and stream pass through mapping errors that have occurred. Maximum of 100 error events will be recorded. |
| 1.3.6.1.4.1.1166.1.31.200.6.1 | RowapexMappingErrorEntry | not-accessible | current | Program, PID, Stream Pass Through Error Table Entry. |
| 1.3.6.1.4.1.1166.1.31.200.6.1.1 | ColumnapexMappingErrorIndex | not-accessible | current | Index to Program, PID, Stream Pass Through, DEPI Control, DEPI Session Error table. |
| 1.3.6.1.4.1.1166.1.31.200.6.1.2 | ColumnapexMappingErrorTimeLogged | read-only | current | Time in GPS seconds (apexSystemTime) that this error was logged. |
| 1.3.6.1.4.1.1166.1.31.200.6.1.3 | ColumnapexMappingErrorCode | read-only | current | Error code for this mapping error. 0 indicates no error. |
| 1.3.6.1.4.1.1166.1.31.200.6.1.4 | ColumnapexMappingErrorMappingType | read-only | current | Type of mapping (program, ancillary PID, or stream pass through). |
| 1.3.6.1.4.1.1166.1.31.200.6.1.5 | ColumnapexMappingErrorInputType | read-only | current | Input Type. Indicates if mapping is from Gigabit Ethernet or Fast Ethernet. |
| 1.3.6.1.4.1.1166.1.31.200.6.1.6 | ColumnapexMappingErrorInputInterface | read-only | current | Interface port number of the primary input interface. |
| 1.3.6.1.4.1.1166.1.31.200.6.1.7 | ColumnapexMappingErrorUdpPort | read-only | current | Input UDP Port for primary input. |
| 1.3.6.1.4.1.1166.1.31.200.6.1.8 | ColumnapexMappingErrorMulticastIp | read-only | current | The Multicast receive IP address for primary input. |
| 1.3.6.1.4.1.1166.1.31.200.6.1.9 | ColumnapexMappingErrorSourceIp | read-only | current | This is the IGMP v3 Source IP address of the source device for the primary input. |
| 1.3.6.1.4.1.1166.1.31.200.6.1.10 | ColumnapexMappingErrorInputProgramPid | read-only | current | For program mappings, this is the input program number of the program being mapped. For ancillary PID mappings, this is the input PID number being mapped. For … |
| 1.3.6.1.4.1.1166.1.31.200.6.1.11 | ColumnapexMappingErrorOutputProgramPid | read-only | current | For program mappings, this is the output program number of the program being mapped. For ancillary PID mappings, this is the output PID number being mapped. Fo… |
| 1.3.6.1.4.1.1166.1.31.200.6.1.12 | ColumnapexMappingErrorOutputOpMode | read-only | current | Operating mode of the output transport stream for this mapping. |
| 1.3.6.1.4.1.1166.1.31.200.6.1.13 | ColumnapexMappingErrorOutputTsNum | read-only | current | The number of the output transport stream for this mapping error. |
| 1.3.6.1.4.1.1166.1.31.200.6.1.14 | ColumnapexMappingErrorSecInputInterface | read-only | current | Interface port number of the secondary input interface. An interface number of 0 indicates no secondary input. |
| 1.3.6.1.4.1.1166.1.31.200.6.1.15 | ColumnapexMappingErrorSecUdpPort | read-only | current | Input UDP Port for secondary input. |
| 1.3.6.1.4.1.1166.1.31.200.6.1.16 | ColumnapexMappingErrorSecMulticastIp | read-only | current | The Multicast receive IP address for secondary input. |
| 1.3.6.1.4.1.1166.1.31.200.6.1.17 | ColumnapexMappingErrorSecSourceIp | read-only | current | This is the IGMP v3 Source IP address of the source device for the secondary input. |
| 1.3.6.1.4.1.1166.1.31.200.7 | TableapexChassisRedundancyEventTable | not-accessible | current | Table of Chassis Redundancy Events. Maximum of 300 events will be recorded. |
| 1.3.6.1.4.1.1166.1.31.200.7.1 | RowapexChassisRedundancyEventEntry | not-accessible | current | Chassis Redundancy Event Table Entry. |
| 1.3.6.1.4.1.1166.1.31.200.7.1.1 | ColumnapexChassisRedundancyEventIndex | not-accessible | current | Index for Chassis Redundancy Event table. |
| 1.3.6.1.4.1.1166.1.31.200.7.1.2 | ColumnapexChassisRedundancyEventTimeLogged | read-only | current | Time in GPS seconds (apexSystemTime) that this event was logged. |
| 1.3.6.1.4.1.1166.1.31.200.7.1.3 | ColumnapexChassisRedundancyEventDescription | read-only | current | Text string describing the event. |
| 1.3.6.1.4.1.1166.1.31.5000 | NodeapexDebug |