APPN-MIB
398 objects
This is the MIB module for objects used to manage network devices with APPN capabilities.
Imported Objects
| IANAifType-MIB | IANAifType |
| SNA-NAU-MIB | snanauMIB |
| SNMPv2-CONF | MODULE-COMPLIANCE NOTIFICATION-GROUP OBJECT-GROUP |
| SNMPv2-SMI | Counter32 Gauge32 MODULE-IDENTITY NOTIFICATION-TYPE OBJECT-TYPE TimeTicks Unsigned32 |
| SNMPv2-TC | DateAndTime DisplayString RowPointer TEXTUAL-CONVENTION TimeStamp TruthValue VariablePointer |
| OID | Name | Access | Status | Description |
|---|---|---|---|---|
| 1.3.6.1.2.1.34.4 | IdentityappnMIB | This is the MIB module for objects used to manage network devices with APPN capabilities. | ||
| 1.3.6.1.2.1.34.4.1 | NodeappnObjects | |||
| 1.3.6.1.2.1.34.4.1.1 | NodeappnNode | |||
| 1.3.6.1.2.1.34.4.1.1.1 | NodeappnGeneralInfoAndCaps | |||
| 1.3.6.1.2.1.34.4.1.1.1.1 | ScalarappnNodeCpName | read-only | current | Administratively assigned network name for this node. |
| 1.3.6.1.2.1.34.4.1.1.1.2 | ScalarappnNodeMibVersion | read-only | deprecated | The value of LAST-UPDATED from this module's MODULE-IDENTITY macro. This object gives a Management Station an easy way of determining the level of the MIB supp… |
| 1.3.6.1.2.1.34.4.1.1.1.3 | ScalarappnNodeId | read-only | current | This node's Node Identification, which it sends in bytes 2-5 of XID. |
| 1.3.6.1.2.1.34.4.1.1.1.4 | ScalarappnNodeType | read-only | current | Type of APPN node: networkNode(1) - APPN network node endNode(2) - APPN end node t21len(4) - LEN end node Note: A branch network node SHALL return endNode(2) a… |
| 1.3.6.1.2.1.34.4.1.1.1.5 | ScalarappnNodeUpTime | read-only | current | Amount of time (in hundredths of a second) since the APPN node was last reinitialized. |
| 1.3.6.1.2.1.34.4.1.1.1.6 | ScalarappnNodeParallelTg | read-only | current | Indicates whether this node supports parallel TGs. |
| 1.3.6.1.2.1.34.4.1.1.1.7 | ScalarappnNodeAdaptiveBindPacing | read-only | current | Indicates whether this node supports adaptive bind pacing for dependent LUs. |
| 1.3.6.1.2.1.34.4.1.1.1.8 | ScalarappnNodeHprSupport | read-only | current | Indicates this node's level of support for high-performance routing (HPR): noHprSupport(1) - no HPR support hprBaseOnly(2) - HPR base (option set 1400) support… |
| 1.3.6.1.2.1.34.4.1.1.1.9 | ScalarappnNodeMaxSessPerRtpConn | read-only | current | This object represents a configuration parameter indicating the maximum number of sessions that the APPN node is to put on any HPR connection. The value is zer… |
| 1.3.6.1.2.1.34.4.1.1.1.10 | ScalarappnNodeHprIntRteSetups | read-only | current | The total number of HPR route setups received for routes passing through this node since the node was last reinitialized. |
| 1.3.6.1.2.1.34.4.1.1.1.11 | ScalarappnNodeHprIntRteRejects | read-only | current | The number of HPR route setups rejected by this node for routes passing through it since the node was last reinitialized. |
| 1.3.6.1.2.1.34.4.1.1.1.12 | ScalarappnNodeHprOrgRteSetups | read-only | current | The total number of HPR route setups sent for routes originating in this node since the node was last reinitialized. |
| 1.3.6.1.2.1.34.4.1.1.1.13 | ScalarappnNodeHprOrgRteRejects | read-only | current | The number of HPR route setups rejected by other nodes for routes originating in this node since the node was last reinitialized. |
| 1.3.6.1.2.1.34.4.1.1.1.14 | ScalarappnNodeHprEndRteSetups | read-only | current | The total number of HPR route setups received for routes ending in this node since the node was last reinitialized. |
| 1.3.6.1.2.1.34.4.1.1.1.15 | ScalarappnNodeHprEndRteRejects | read-only | current | The number of HPR route setups rejected by this node for routes ending in it since the node was last reinitialized. |
| 1.3.6.1.2.1.34.4.1.1.1.16 | ScalarappnNodeCounterDisconTime | read-only | current | The value of the sysUpTime object the last time the APPN node was reinitialized. |
| 1.3.6.1.2.1.34.4.1.1.1.17 | ScalarappnNodeLsCounterType | read-only | current | Indicates which ANR traffic, if any, the node includes in the counts returned by the APPN link station counters appnLsInXidBytes, appnLsInMsgBytes, appnLsInXid… |
| 1.3.6.1.2.1.34.4.1.1.1.18 | ScalarappnNodeBrNn | read-only | current | Indicates whether this node is currently configured as a branch network node. Note: throughout the remainder of this MIB module, branch network node is treated… |
| 1.3.6.1.2.1.34.4.1.1.2 | NodeappnNnUniqueInfoAndCaps | |||
| 1.3.6.1.2.1.34.4.1.1.2.1 | ScalarappnNodeNnCentralDirectory | read-only | current | Indicates whether this node supports central directory services. This object corresponds to cv4580, byte 8, bit 1. |
| 1.3.6.1.2.1.34.4.1.1.2.2 | ScalarappnNodeNnTreeCache | read-only | current | Indicates this node's level of support for caching of route trees. Three levels are specified: noCache(1) - caching of route trees is not supported cacheNoIncr… |
| 1.3.6.1.2.1.34.4.1.1.2.3 | ScalarappnNodeNnRouteAddResist | read-only | current | Route addition resistance. This administratively assigned value indicates the relative desirability of using this node for intermediate session traffic. The va… |
| 1.3.6.1.2.1.34.4.1.1.2.4 | ScalarappnNodeNnIsr | read-only | current | Indicates whether the node supports intermediate session routing. This object corresponds to cv4580, byte 8, bit 2. |
| 1.3.6.1.2.1.34.4.1.1.2.5 | ScalarappnNodeNnFrsn | read-only | current | The last flow-reduction sequence number (FRSN) sent by this node in a topology update to an adjacent network node. |
| 1.3.6.1.2.1.34.4.1.1.2.6 | ScalarappnNodeNnPeriBorderSup | read-only | current | Indicates whether this node has peripheral border node support. This object corresponds to cv4580, byte 9, bit 0. |
| 1.3.6.1.2.1.34.4.1.1.2.7 | ScalarappnNodeNnInterchangeSup | read-only | current | Indicates whether this node has interchange node support. This object corresponds to cv4580, byte 9, bit 1. |
| 1.3.6.1.2.1.34.4.1.1.2.8 | ScalarappnNodeNnExteBorderSup | read-only | current | Indicates whether this node has extended border node support. This object corresponds to cv4580, byte 9, bit 2. |
| 1.3.6.1.2.1.34.4.1.1.2.9 | ScalarappnNodeNnSafeStoreFreq | read-write | current | The topology safe store frequency. If this number is not zero, then the topology database is saved each time the total number of topology database updates (TDU… |
| 1.3.6.1.2.1.34.4.1.1.2.10 | ScalarappnNodeNnRsn | read-only | current | Resource sequence number for this node, which it assigns and controls. This object corresponds to the numeric value in cv4580, bytes 2-5. |
| 1.3.6.1.2.1.34.4.1.1.2.11 | ScalarappnNodeNnCongested | read-only | current | Indicates whether this node is congested. Other network nodes stop routing traffic to this node while this flag is on. This object corresponds to cv4580, byte … |
| 1.3.6.1.2.1.34.4.1.1.2.12 | ScalarappnNodeNnIsrDepleted | read-only | current | Indicate whether intermediated session routing resources are depleted. Other network nodes stop routing traffic through this node while this flag is on. This o… |
| 1.3.6.1.2.1.34.4.1.1.2.13 | ScalarappnNodeNnQuiescing | read-only | current | Indicates whether the node is quiescing. This object corresponds to cv4580, byte 7, bit 5. |
| 1.3.6.1.2.1.34.4.1.1.2.14 | ScalarappnNodeNnGateway | read-only | current | Indicates whether the node has gateway services support. This object corresponds to cv4580, byte 8, bit 0. |
| 1.3.6.1.2.1.34.4.1.1.3 | NodeappnEnUniqueCaps | |||
| 1.3.6.1.2.1.34.4.1.1.3.1 | ScalarappnNodeEnModeCosMap | read-only | current | Indicates whether this end node supports mode name to COS name mapping. |
| 1.3.6.1.2.1.34.4.1.1.3.2 | ScalarappnNodeEnNnServer | read-only | current | The fully qualified name of the current NN server for this end node. An NN server is identified using the format specified in the SnaControlPointName textual c… |
| 1.3.6.1.2.1.34.4.1.1.3.3 | ScalarappnNodeEnLuSearch | read-only | current | Indicates whether the node is to be searched for LUs as part of a network broadcast search. A branch network node shall also implement this object. |
| 1.3.6.1.2.1.34.4.1.1.4 | NodeappnPortInformation | |||
| 1.3.6.1.2.1.34.4.1.1.4.1 | TableappnPortTable | not-accessible | current | The Port table describes the configuration and current status of the ports used by APPN. When it is known to the APPN component, an OBJECT IDENTIFIER pointing … |
| 1.3.6.1.2.1.34.4.1.1.4.1.1 | RowappnPortEntry | not-accessible | current | The port name is used as the index to this table. |
| 1.3.6.1.2.1.34.4.1.1.4.1.1.1 | ColumnappnPortName | not-accessible | current | Administratively assigned name for this APPN port. |
| 1.3.6.1.2.1.34.4.1.1.4.1.1.2 | ColumnappnPortCommand | read-write | current | Object by which a Management Station can activate, deactivate, or recycle (i.e., cause to be deactivated and then immediately activated) a port, by setting the… |
| 1.3.6.1.2.1.34.4.1.1.4.1.1.3 | ColumnappnPortOperState | read-only | current | Indicates the current state of this port: inactive(1) - port is inactive pendactive(2) - port is pending active active(3) - port is active pendinact(4) - port … |
| 1.3.6.1.2.1.34.4.1.1.4.1.1.4 | ColumnappnPortDlcType | read-only | current | The type of DLC interface, distinguished according to the protocol immediately 'below' this layer. |
| 1.3.6.1.2.1.34.4.1.1.4.1.1.5 | ColumnappnPortPortType | read-only | current | Identifies the type of line used by this port: leased(1) - leased line switched(2) - switched line sharedAccessFacilities(3) - shared access facility, such as … |
| 1.3.6.1.2.1.34.4.1.1.4.1.1.6 | ColumnappnPortSIMRIM | read-only | current | Indicates whether Set Initialization Mode (SIM) and Receive Initialization Mode (RIM) are supported for this port. |
| 1.3.6.1.2.1.34.4.1.1.4.1.1.7 | ColumnappnPortLsRole | read-only | current | Initial role for link stations activated through this port. The values map to the following settings in the initial XID, where 'ABM' indicates asynchronous bal… |
| 1.3.6.1.2.1.34.4.1.1.4.1.1.8 | ColumnappnPortNegotLs | read-only | current | Indicates whether the node supports negotiable link stations for this port. |
| 1.3.6.1.2.1.34.4.1.1.4.1.1.9 | ColumnappnPortDynamicLinkSupport | read-only | current | Indicates whether this node allows call-in on this port from nodes not defined locally. |
| 1.3.6.1.2.1.34.4.1.1.4.1.1.10 | ColumnappnPortMaxRcvBtuSize | read-only | current | Maximum Basic Transmission Unit (BTU) size that a link station on this port can receive. This object corresponds to bytes 21-22 of XID3. |
| 1.3.6.1.2.1.34.4.1.1.4.1.1.11 | ColumnappnPortMaxIframeWindow | read-only | current | Maximum number of I-frames that can be received by the XID sender before an acknowledgement is received. |
| 1.3.6.1.2.1.34.4.1.1.4.1.1.12 | ColumnappnPortDefLsGoodXids | read-only | current | The total number of successful XID exchanges that have occurred on all defined link stations on this port since the last time this port was started. |
| 1.3.6.1.2.1.34.4.1.1.4.1.1.13 | ColumnappnPortDefLsBadXids | read-only | current | The total number of unsuccessful XID exchanges that have occurred on all defined link stations on this port since the last time this port was started. |
| 1.3.6.1.2.1.34.4.1.1.4.1.1.14 | ColumnappnPortDynLsGoodXids | read-only | current | The total number of successful XID exchanges that have occurred on all dynamic link stations on this port since the last time this port was started. |
| 1.3.6.1.2.1.34.4.1.1.4.1.1.15 | ColumnappnPortDynLsBadXids | read-only | current | The total number of unsuccessful XID exchanges that have occurred on all dynamic link stations on this port since the last time this port was started. |
| 1.3.6.1.2.1.34.4.1.1.4.1.1.16 | ColumnappnPortSpecific | read-only | current | Identifies the object, e.g., one in a DLC-specific MIB, that can provide additional information related to this port. If the agent is unable to identify such a… |
| 1.3.6.1.2.1.34.4.1.1.4.1.1.17 | ColumnappnPortDlcLocalAddr | read-only | current | Local DLC address of this port. |
| 1.3.6.1.2.1.34.4.1.1.4.1.1.18 | ColumnappnPortCounterDisconTime | read-only | current | The value of the sysUpTime object the last time the port was started. |
| 1.3.6.1.2.1.34.4.1.1.5 | NodeappnLinkStationInformation | |||
| 1.3.6.1.2.1.34.4.1.1.5.1 | TableappnLsTable | not-accessible | current | This table contains detailed information about the link station configuration and its current status. |
| 1.3.6.1.2.1.34.4.1.1.5.1.1 | RowappnLsEntry | not-accessible | current | This table is indexed by the link station name. |
| 1.3.6.1.2.1.34.4.1.1.5.1.1.1 | ColumnappnLsName | not-accessible | current | Administratively assigned name for the link station. The name can be from one to ten characters. |
| 1.3.6.1.2.1.34.4.1.1.5.1.1.2 | ColumnappnLsCommand | read-write | current | Object by which a Management Station can activate, deactivate, or recycle (i.e., cause to be deactivated and then immediately reactivated) a link station, by s… |
| 1.3.6.1.2.1.34.4.1.1.5.1.1.3 | ColumnappnLsOperState | read-only | current | State of this link station. The comments map these more granular states to the 'traditional' four states for SNA resources. Values (2) through (5) represent th… |
| 1.3.6.1.2.1.34.4.1.1.5.1.1.4 | ColumnappnLsPortName | read-only | current | Administratively assigned name for the port associated with this link station. The name can be from one to ten characters. |
| 1.3.6.1.2.1.34.4.1.1.5.1.1.5 | ColumnappnLsDlcType | read-only | current | The type of DLC interface, distinguished according to the protocol immediately 'below' this layer. |
| 1.3.6.1.2.1.34.4.1.1.5.1.1.6 | ColumnappnLsDynamic | read-only | current | Identifies whether this is a dynamic link station. Dynamic link stations are created when links that have not been locally defined are established by adjacent … |
| 1.3.6.1.2.1.34.4.1.1.5.1.1.7 | ColumnappnLsAdjCpName | read-only | current | Fully qualified name of the adjacent node for this link station. An adjacent node is identified using the format specified in the SnaControlPointName textual c… |
| 1.3.6.1.2.1.34.4.1.1.5.1.1.8 | ColumnappnLsAdjNodeType | read-only | current | Node type of the adjacent node on this link: networkNode(1) - APPN network node endNode(2) - APPN end node t21len(4) - LEN end node unknown(255) - the agent do… |
| 1.3.6.1.2.1.34.4.1.1.5.1.1.9 | ColumnappnLsTgNum | read-only | current | Number associated with the TG to this link station, with a range from 0 to 256. A value of 256 indicates that the TG number has not been negotiated and is unkn… |
| 1.3.6.1.2.1.34.4.1.1.5.1.1.10 | ColumnappnLsLimResource | read-only | current | Indicates whether the link station is a limited resource. A link station that is a limited resource is deactivated when it is no longer in use. |
| 1.3.6.1.2.1.34.4.1.1.5.1.1.11 | ColumnappnLsActOnDemand | read-only | current | Indicates whether the link station is activatable on demand. Such a link station is reported in the topology as active regardless of its actual state, so that … |
| 1.3.6.1.2.1.34.4.1.1.5.1.1.12 | ColumnappnLsMigration | read-only | current | Indicates whether this link station will be used for connections to down-level or migration partners. In general, migration nodes do not append their CP names … |
| 1.3.6.1.2.1.34.4.1.1.5.1.1.13 | ColumnappnLsPartnerNodeId | read-only | current | The partner's Node Identification, from bytes 2-5 of the XID received from the partner. If this value is not available, then the characters '00000000' are retu… |
| 1.3.6.1.2.1.34.4.1.1.5.1.1.14 | ColumnappnLsCpCpSessionSupport | read-only | current | Indicates whether CP-CP sessions are supported by this link station. For a dynamic link, this object represents the default ('Admin') value. |
| 1.3.6.1.2.1.34.4.1.1.5.1.1.15 | ColumnappnLsMaxSendBtuSize | read-only | current | Numeric value between 99 and 32767 inclusive indicating the maximum number of bytes in a Basic Transmission Unit (BTU) sent on this link. When the link state (… |
| 1.3.6.1.2.1.34.4.1.1.5.1.1.16 | ColumnappnLsInXidBytes | read-only | current | Number of XID bytes received. All of the bytes in the SNA basic transmission unit (BTU), i.e., all of the bytes in the DLC XID Information Field, are counted. |
| 1.3.6.1.2.1.34.4.1.1.5.1.1.17 | ColumnappnLsInMsgBytes | read-only | current | Number of message (I-frame) bytes received. All of the bytes in the SNA basic transmission unit (BTU), including the transmission header (TH), are counted. |
| 1.3.6.1.2.1.34.4.1.1.5.1.1.18 | ColumnappnLsInXidFrames | read-only | current | Number of XID frames received. |
| 1.3.6.1.2.1.34.4.1.1.5.1.1.19 | ColumnappnLsInMsgFrames | read-only | current | Number of message (I-frame) frames received. |
| 1.3.6.1.2.1.34.4.1.1.5.1.1.20 | ColumnappnLsOutXidBytes | read-only | current | Number of XID bytes sent. All of the bytes in the SNA basic transmission unit (BTU), i.e., all of the bytes in the DLC XID Information Field, are counted. |
| 1.3.6.1.2.1.34.4.1.1.5.1.1.21 | ColumnappnLsOutMsgBytes | read-only | current | Number of message (I-frame) bytes sent. All of the bytes in the SNA basic transmission unit (BTU), including the transmission header (TH), are counted. |
| 1.3.6.1.2.1.34.4.1.1.5.1.1.22 | ColumnappnLsOutXidFrames | read-only | current | Number of XID frames sent. |
| 1.3.6.1.2.1.34.4.1.1.5.1.1.23 | ColumnappnLsOutMsgFrames | read-only | current | Number of message (I-frame) frames sent. |
| 1.3.6.1.2.1.34.4.1.1.5.1.1.24 | ColumnappnLsEchoRsps | read-only | current | Number of echo responses returned from adjacent link station. A response should be returned for each test frame sent by this node. Test frames are sent to adja… |
| 1.3.6.1.2.1.34.4.1.1.5.1.1.25 | ColumnappnLsCurrentDelay | read-only | current | The time that it took for the last test signal to be sent and returned from this link station to the adjacent link station. This time is represented in millise… |
| 1.3.6.1.2.1.34.4.1.1.5.1.1.26 | ColumnappnLsMaxDelay | read-only | current | The longest time it took for a test signal to be sent and returned from this link station to the adjacent link station. This time is represented in millisecond… |
| 1.3.6.1.2.1.34.4.1.1.5.1.1.27 | ColumnappnLsMinDelay | read-only | current | The shortest time it took for a test signal to be sent and returned from this link station to the adjacent link station. This time is represented in millisecon… |
| 1.3.6.1.2.1.34.4.1.1.5.1.1.28 | ColumnappnLsMaxDelayTime | read-only | current | The time when the longest delay occurred. This time can be used to identify when this high water mark occurred in relation to other events in the APPN node, fo… |
| 1.3.6.1.2.1.34.4.1.1.5.1.1.29 | ColumnappnLsGoodXids | read-only | current | The total number of successful XID exchanges that have occurred on this link station since the time it was started. |
| 1.3.6.1.2.1.34.4.1.1.5.1.1.30 | ColumnappnLsBadXids | read-only | current | The total number of unsuccessful XID exchanges that have occurred on this link station since the time it was started. |
| 1.3.6.1.2.1.34.4.1.1.5.1.1.31 | ColumnappnLsSpecific | read-only | current | Identifies the object, e.g., one in a DLC-specific MIB, that can provide additional information related to this link station. If the agent is unable to identif… |
| 1.3.6.1.2.1.34.4.1.1.5.1.1.32 | ColumnappnLsActiveTime | read-only | current | The cumulative amount of time since the node was last reinitialized, measured in hundredths of a second, that this link station has been in the active state. A… |
| 1.3.6.1.2.1.34.4.1.1.5.1.1.33 | ColumnappnLsCurrentStateTime | read-only | current | The amount of time, measured in hundredths of a second, that the link station has been in its current state. |
| 1.3.6.1.2.1.34.4.1.1.5.1.1.34 | ColumnappnLsHprSup | read-only | current | Indicates the level of high performance routing (HPR) support over this link: noHprSupport(1) - no HPR support hprBaseOnly(2) - HPR base (option set 1400) supp… |
| 1.3.6.1.2.1.34.4.1.1.5.1.1.35 | ColumnappnLsErrRecoSup | read-only | current | Indicates whether the link station is supporting HPR link-level error recovery. |
| 1.3.6.1.2.1.34.4.1.1.5.1.1.36 | ColumnappnLsForAnrLabel | read-only | current | The forward Automatic Network Routing (ANR) label for this link station. If the link does not support HPR or the value is unknown, a zero-length string is retu… |
| 1.3.6.1.2.1.34.4.1.1.5.1.1.37 | ColumnappnLsRevAnrLabel | read-only | current | The reverse Automatic Network Routing (ANR) label for this link station. If the link does not support HPR or the value is unknown, a zero-length string is retu… |
| 1.3.6.1.2.1.34.4.1.1.5.1.1.38 | ColumnappnLsCpCpNceId | read-only | current | The network connection endpoint identifier (NCE ID) for CP-CP sessions if this node supports the HPR transport tower, a zero-length string if the value is unkn… |
| 1.3.6.1.2.1.34.4.1.1.5.1.1.39 | ColumnappnLsRouteNceId | read-only | current | The network connection endpoint identifier (NCE ID) for Route Setup if this node supports the HPR transport tower, a zero- length string if the value is unknow… |
| 1.3.6.1.2.1.34.4.1.1.5.1.1.40 | ColumnappnLsBfNceId | read-only | current | The network connection endpoint identifier (NCE ID) for the APPN/HPR boundary function if this node supports the HPR transport tower, a zero-length string if t… |
| 1.3.6.1.2.1.34.4.1.1.5.1.1.41 | ColumnappnLsLocalAddr | read-only | current | Local address of this link station. |
| 1.3.6.1.2.1.34.4.1.1.5.1.1.42 | ColumnappnLsRemoteAddr | read-only | current | Address of the remote link station on this link. |
| 1.3.6.1.2.1.34.4.1.1.5.1.1.43 | ColumnappnLsRemoteLsName | read-only | current | Remote link station discovered from the XID exchange. The name can be from one to ten characters. A zero-length string indicates that the value is not known. |
| 1.3.6.1.2.1.34.4.1.1.5.1.1.44 | ColumnappnLsCounterDisconTime | read-only | current | The value of the sysUpTime object the last time the link station was started. |
| 1.3.6.1.2.1.34.4.1.1.5.1.1.45 | ColumnappnLsMltgMember | read-only | current | Indicates whether the link is a member of a multi-link TG. If the link's TG has been brought up as a multi-link TG, then the link is reported as a member of a … |
| 1.3.6.1.2.1.34.4.1.1.5.2 | TableappnLsStatusTable | not-accessible | current | This table contains information related to exceptional and potentially exceptional conditions that occurred during the activation, XID exchange, and terminatio… |
| 1.3.6.1.2.1.34.4.1.1.5.2.1 | RowappnLsStatusEntry | not-accessible | current | This table is indexed by the LsStatusIndex, which is an integer that is continuously updated until it eventually wraps. |
| 1.3.6.1.2.1.34.4.1.1.5.2.1.1 | ColumnappnLsStatusIndex | not-accessible | current | Table index. The value of the index begins at zero and is incremented up to a maximum value of 2**31-1 (2,147,483,647) before wrapping. |
| 1.3.6.1.2.1.34.4.1.1.5.2.1.2 | ColumnappnLsStatusTime | read-only | current | Time when the exception condition occurred. This time can be used to identify when this event occurred in relation to other events in the APPN node, for exampl… |
| 1.3.6.1.2.1.34.4.1.1.5.2.1.3 | ColumnappnLsStatusLsName | read-only | current | Administratively assigned name for the link station experiencing the condition. |
| 1.3.6.1.2.1.34.4.1.1.5.2.1.4 | ColumnappnLsStatusCpName | read-only | current | Fully qualified name of the adjacent node for this link station. An adjacent node is identified using the format specified in the SnaControlPointName textual c… |
| 1.3.6.1.2.1.34.4.1.1.5.2.1.5 | ColumnappnLsStatusPartnerId | read-only | current | The partner's Node Identification, from bytes 2-5 of the XID received from the partner. If this value is not available, then the characters '00000000' are retu… |
| 1.3.6.1.2.1.34.4.1.1.5.2.1.6 | ColumnappnLsStatusTgNum | read-only | current | Number associated with the TG to this link station, with a range from 0 to 256. A value of 256 indicates that the TG number was unknown at the time of the fail… |
| 1.3.6.1.2.1.34.4.1.1.5.2.1.7 | ColumnappnLsStatusGeneralSense | read-only | current | The error sense data associated with the start sequence of activation of a link up to the beginning of the XID sequence. This is the sense data that came from … |
| 1.3.6.1.2.1.34.4.1.1.5.2.1.8 | ColumnappnLsStatusRetry | read-only | current | Indicates whether the node will retry the start request to activate the link. |
| 1.3.6.1.2.1.34.4.1.1.5.2.1.9 | ColumnappnLsStatusEndSense | read-only | current | The sense data associated with the termination of the link connection to adjacent node. This is the sense data that came from the DLC layer. |
| 1.3.6.1.2.1.34.4.1.1.5.2.1.10 | ColumnappnLsStatusXidLocalSense | read-only | current | The sense data associated with the rejection of the XID. This is the sense data that came from the local node (this node) when it built the XID Negotiation Err… |
| 1.3.6.1.2.1.34.4.1.1.5.2.1.11 | ColumnappnLsStatusXidRemoteSense | read-only | current | The sense data the adjacent node returned to this node indicating the reason the XID was rejected. This is the sense data that came from the remote node in the… |
| 1.3.6.1.2.1.34.4.1.1.5.2.1.12 | ColumnappnLsStatusXidByteInError | read-only | current | This object identifies the actual byte in the XID that caused the error. The value 65536 indicates that the object has no meaning. For values in the range 0-65… |
| 1.3.6.1.2.1.34.4.1.1.5.2.1.13 | ColumnappnLsStatusXidBitInError | read-only | current | This object identifies the actual bit in error (0 through 7) within the errored byte of the XID. The value 8 indicates that this object has no meaning. For val… |
| 1.3.6.1.2.1.34.4.1.1.5.2.1.14 | ColumnappnLsStatusDlcType | read-only | current | The type of DLC interface, distinguished according to the protocol immediately 'below' this layer. |
| 1.3.6.1.2.1.34.4.1.1.5.2.1.15 | ColumnappnLsStatusLocalAddr | read-only | current | Local address of this link station. |
| 1.3.6.1.2.1.34.4.1.1.5.2.1.16 | ColumnappnLsStatusRemoteAddr | read-only | current | Address of the remote link station on this link. |
| 1.3.6.1.2.1.34.4.1.1.6 | NodeappnVrnInfo | |||
| 1.3.6.1.2.1.34.4.1.1.6.1 | TableappnVrnTable | not-accessible | current | This table relates a virtual routing node to an APPN port. |
| 1.3.6.1.2.1.34.4.1.1.6.1.1 | RowappnVrnEntry | not-accessible | current | This table is indexed by the virtual routing node name, TG number, and port name. There will be a matching entry in the appnLocalTgTable to represent status an… |
| 1.3.6.1.2.1.34.4.1.1.6.1.1.1 | ColumnappnVrnName | not-accessible | current | Administratively assigned name of the virtual routing node. This is a fully qualified name, and matches the appnLocalTgDest name in the appnLocalTgTable. |
| 1.3.6.1.2.1.34.4.1.1.6.1.1.2 | ColumnappnVrnTgNum | not-accessible | current | Number associated with the transmission group representing this virtual routing node definition. |
| 1.3.6.1.2.1.34.4.1.1.6.1.1.3 | ColumnappnVrnPortName | read-only | current | The name of the port this virtual routing node definition is defined to. |
| 1.3.6.1.2.1.34.4.1.2 | NodeappnNn | |||
| 1.3.6.1.2.1.34.4.1.2.1 | NodeappnNnTopo | |||
| 1.3.6.1.2.1.34.4.1.2.1.1 | ScalarappnNnTopoMaxNodes | read-only | current | Maximum number of node entries allowed in the APPN topology database. It is an implementation choice whether to count only network-node entries, or to count al… |
| 1.3.6.1.2.1.34.4.1.2.1.2 | ScalarappnNnTopoCurNumNodes | read-only | current | Current number of node entries in this node's topology database. It is an implementation choice whether to count only network-node entries, or to count all nod… |
| 1.3.6.1.2.1.34.4.1.2.1.3 | ScalarappnNnTopoNodePurges | read-only | current | Total number of topology node records purged from this node's topology database since the node was last reinitialized. |
| 1.3.6.1.2.1.34.4.1.2.1.4 | ScalarappnNnTopoTgPurges | read-only | current | Total number of topology TG records purged from this node's topology database since the node was last reinitialized. |
| 1.3.6.1.2.1.34.4.1.2.1.5 | ScalarappnNnTopoTotalTduWars | read-only | current | Number of TDU wars detected by this node since its last initialization. |
| 1.3.6.1.2.1.34.4.1.2.2 | NodeappnNnTopology | |||
| 1.3.6.1.2.1.34.4.1.2.2.3 | TableappnNnTopologyFRTable | not-accessible | current | Portion of the APPN topology database that describes all of the APPN network nodes and virtual routing nodes known to this node. |
| 1.3.6.1.2.1.34.4.1.2.2.3.1 | RowappnNnTopologyFREntry | not-accessible | current | The FRSN and the fully qualified node name are used to index this table. |
| 1.3.6.1.2.1.34.4.1.2.2.3.1.1 | ColumnappnNnNodeFRFrsn | not-accessible | current | Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be as… |
| 1.3.6.1.2.1.34.4.1.2.2.3.1.2 | ColumnappnNnNodeFRName | not-accessible | current | Administratively assigned network name that is locally defined at each network node. |
| 1.3.6.1.2.1.34.4.1.2.2.3.1.3 | ColumnappnNnNodeFREntryTimeLeft | read-only | current | Number of days before deletion of this network node entry. |
| 1.3.6.1.2.1.34.4.1.2.2.3.1.4 | ColumnappnNnNodeFRType | read-only | current | Type of APPN node. |
| 1.3.6.1.2.1.34.4.1.2.2.3.1.5 | ColumnappnNnNodeFRRsn | read-only | current | Resource sequence number, which is assigned and controlled by the network node that owns this resource. An odd number indicates that information about the reso… |
| 1.3.6.1.2.1.34.4.1.2.2.3.1.6 | ColumnappnNnNodeFRRouteAddResist | read-only | current | Route addition resistance. This administratively assigned value indicates the relative desirability of using this node for intermediate session traffic. The va… |
| 1.3.6.1.2.1.34.4.1.2.2.3.1.7 | ColumnappnNnNodeFRCongested | read-only | current | Indicates whether this node is congested. This node is not be included in route selection by other nodes when this congestion exists. This object corresponds t… |
| 1.3.6.1.2.1.34.4.1.2.2.3.1.8 | ColumnappnNnNodeFRIsrDepleted | read-only | current | Indicates whether intermediate session routing resources are depleted. This node is not included in intermediate route selection by other nodes when resources … |
| 1.3.6.1.2.1.34.4.1.2.2.3.1.9 | ColumnappnNnNodeFRQuiescing | read-only | current | Indicates whether the node is quiescing. This node is not included in route selection by other nodes when the node is quiescing. This object corresponds to cv4… |
| 1.3.6.1.2.1.34.4.1.2.2.3.1.10 | ColumnappnNnNodeFRGateway | read-only | current | Indicates whether the node provide gateway services. This object corresponds to cv4580, byte 8, bit 0. |
| 1.3.6.1.2.1.34.4.1.2.2.3.1.11 | ColumnappnNnNodeFRCentralDirectory | read-only | current | Indicates whether the node supports central directory services. This object corresponds to cv4580, byte 8, bit 1. |
| 1.3.6.1.2.1.34.4.1.2.2.3.1.12 | ColumnappnNnNodeFRIsr | read-only | current | Indicates whether the node supports intermediate session routing (ISR). This object corresponds to cv4580, byte 8, bit 2. |
| 1.3.6.1.2.1.34.4.1.2.2.3.1.13 | ColumnappnNnNodeFRGarbageCollect | read-only | current | Indicates whether the node has been marked for garbage collection (deletion from the topology database) upon the next garbage collection cycle. This object cor… |
| 1.3.6.1.2.1.34.4.1.2.2.3.1.14 | ColumnappnNnNodeFRHprSupport | read-only | current | Indicates the node's level of support for high-performance routing (HPR): noHprSupport(1) - no HPR support hprBaseOnly(2) - HPR base (option set 1400) supporte… |
| 1.3.6.1.2.1.34.4.1.2.2.3.1.15 | ColumnappnNnNodeFRPeriBorderSup | read-only | current | Indicates whether this node has peripheral border node support. This object corresponds to cv4580, byte 9, bit 0. |
| 1.3.6.1.2.1.34.4.1.2.2.3.1.16 | ColumnappnNnNodeFRInterchangeSup | read-only | current | Indicates whether this node has interchange node support. This object corresponds to cv4580, byte 9, bit 1. |
| 1.3.6.1.2.1.34.4.1.2.2.3.1.17 | ColumnappnNnNodeFRExteBorderSup | read-only | current | Indicates whether this node has extended border node support. This object corresponds to cv4580, byte 9, bit 2. |
| 1.3.6.1.2.1.34.4.1.2.2.3.1.18 | ColumnappnNnNodeFRBranchAwareness | read-only | current | Indicates whether this node supports branch awareness. This object corresponds to cv4580, byte 8, bit 4. |
| 1.3.6.1.2.1.34.4.1.2.2.4 | TableappnNnTgTopologyFRTable | not-accessible | current | Portion of the APPN topology database that describes all of the APPN transmissions groups between nodes in the database. |
| 1.3.6.1.2.1.34.4.1.2.2.4.1 | RowappnNnTgTopologyFREntry | not-accessible | current | This table is indexed by four columns: FRSN, TG owner fully qualified node name, TG destination fully qualified node name, and TG number. |
| 1.3.6.1.2.1.34.4.1.2.2.4.1.1 | ColumnappnNnTgFRFrsn | not-accessible | current | Flow reduction sequence numbers (FRSNs) are associated with Topology Database Updates (TDUs) and are unique only within each APPN network node. A TDU can be as… |
| 1.3.6.1.2.1.34.4.1.2.2.4.1.2 | ColumnappnNnTgFROwner | not-accessible | current | Administratively assigned name for the originating node for this TG. This is the same name specified in the node table. |
| 1.3.6.1.2.1.34.4.1.2.2.4.1.3 | ColumnappnNnTgFRDest | not-accessible | current | Administratively assigned fully qualified network name for the destination node for this TG. |
| 1.3.6.1.2.1.34.4.1.2.2.4.1.4 | ColumnappnNnTgFRNum | not-accessible | current | Number associated with this transmission group. Range is 0-255. |
| 1.3.6.1.2.1.34.4.1.2.2.4.1.5 | ColumnappnNnTgFREntryTimeLeft | read-only | current | Number of days before deletion of this network node TG entry if it is not operational or has an odd (inconsistent) RSN. |
| 1.3.6.1.2.1.34.4.1.2.2.4.1.6 | ColumnappnNnTgFRDestVirtual | read-only | current | Indicates whether the destination node is a virtual routing node. |
| 1.3.6.1.2.1.34.4.1.2.2.4.1.7 | ColumnappnNnTgFRDlcData | read-only | current | DLC-specific data related to a link connection network. |
| 1.3.6.1.2.1.34.4.1.2.2.4.1.8 | ColumnappnNnTgFRRsn | read-only | current | Current owning node's resource sequence number for this resource. An odd number indicates that information about the resource is inconsistent. This object corr… |
| 1.3.6.1.2.1.34.4.1.2.2.4.1.9 | ColumnappnNnTgFROperational | read-only | current | Indicates whether the transmission group is operational. This object corresponds to cv47, byte 6, bit 0. |
| 1.3.6.1.2.1.34.4.1.2.2.4.1.10 | ColumnappnNnTgFRQuiescing | read-only | current | Indicates whether the transmission group is quiescing. If the TG owner is either an extended border node or a branch-aware network node (indicated, respectivel… |
| 1.3.6.1.2.1.34.4.1.2.2.4.1.11 | ColumnappnNnTgFRCpCpSession | read-only | current | Indicates whether CP-CP sessions are supported on this TG, and whether the TG owner's contention-winner session is active on this TG. Some nodes in the network… |
| 1.3.6.1.2.1.34.4.1.2.2.4.1.12 | ColumnappnNnTgFREffCap | read-only | current | Effective capacity for this TG. |
| 1.3.6.1.2.1.34.4.1.2.2.4.1.13 | ColumnappnNnTgFRConnCost | read-only | current | Cost per connect time. This is an administratively assigned value representing the relative cost per unit of time to use this TG. Range is from 0, which means … |
| 1.3.6.1.2.1.34.4.1.2.2.4.1.14 | ColumnappnNnTgFRByteCost | read-only | current | Cost per byte transmitted. This is an administratively assigned value representing the relative cost of transmitting a byte over this TG. Range is from 0, whic… |
| 1.3.6.1.2.1.34.4.1.2.2.4.1.15 | ColumnappnNnTgFRSecurity | read-only | current | Administratively assigned security level of this TG. This object corresponds to cv47, byte 16. |
| 1.3.6.1.2.1.34.4.1.2.2.4.1.16 | ColumnappnNnTgFRDelay | read-only | current | Administratively assigned delay associated with this TG. This object corresponds to cv47, byte 17. |
| 1.3.6.1.2.1.34.4.1.2.2.4.1.17 | ColumnappnNnTgFRUsr1 | read-only | current | First user-defined TG characteristic for this TG. This is an administratively assigned value associated with the TG. This object corresponds to cv47, byte 19. |
| 1.3.6.1.2.1.34.4.1.2.2.4.1.18 | ColumnappnNnTgFRUsr2 | read-only | current | Second user-defined TG characteristic for this TG. This is an administratively assigned value associated with the TG. This object corresponds to cv47, byte 20. |
| 1.3.6.1.2.1.34.4.1.2.2.4.1.19 | ColumnappnNnTgFRUsr3 | read-only | current | Third user-defined TG characteristic for this TG. This is an administratively assigned value associated with the TG. This object corresponds to cv47, byte 21. |
| 1.3.6.1.2.1.34.4.1.2.2.4.1.20 | ColumnappnNnTgFRGarbageCollect | read-only | current | Indicates whether the TG has been marked for garbage collection (deletion from the topology database) upon the next garbage collection cycle. This object corre… |
| 1.3.6.1.2.1.34.4.1.2.2.4.1.21 | ColumnappnNnTgFRSubareaNum | read-only | current | The subarea number associated with this TG. This object corresponds to cv4680, bytes m+2 through m+5. |
| 1.3.6.1.2.1.34.4.1.2.2.4.1.22 | ColumnappnNnTgFRHprSup | read-only | current | Indicates whether high performance routing (HPR) is supported over this TG. This object corresponds to cv4680, byte m+1, bit 2. |
| 1.3.6.1.2.1.34.4.1.2.2.4.1.23 | ColumnappnNnTgFRDestHprTrans | read-only | current | Indicates whether the destination node supports high performance routing (HPR) transport tower. This object corresponds to cv4680, byte m+1, bit 7. |
| 1.3.6.1.2.1.34.4.1.2.2.4.1.24 | ColumnappnNnTgFRTypeIndicator | read-only | current | Indicates the type of the TG. This object corresponds to cv4680, byte m+1, bits 3-4. |
| 1.3.6.1.2.1.34.4.1.2.2.4.1.25 | ColumnappnNnTgFRIntersubnet | read-only | current | Indicates whether the transmission group is an intersubnet TG, which defines a border between subnetworks. This object corresponds to cv4680, byte m+1, bit 5. |
| 1.3.6.1.2.1.34.4.1.2.2.4.1.26 | ColumnappnNnTgFRMltgLinkType | read-only | current | This object indicates whether the transmission group is a multi-link TG. A TG that has been brought up as a multi-link TG is reported as one, even if it curren… |
| 1.3.6.1.2.1.34.4.1.2.2.4.1.27 | ColumnappnNnTgFRBranchTg | read-only | current | Indicates whether the transmission group is a branch TG (equivalently, whether the destination of the transmission group is a branch network node). This object… |
| 1.3.6.1.2.1.34.4.1.3 | NodeappnLocalTopology | |||
| 1.3.6.1.2.1.34.4.1.3.1 | TableappnLocalTgTable | not-accessible | current | TG Table describes all of the TGs owned by this node. The TG destination can be a virtual node, network node, LEN node, or end node. |
| 1.3.6.1.2.1.34.4.1.3.1.1 | RowappnLocalTgEntry | not-accessible | current | This table is indexed by the destination CpName and the TG number. |
| 1.3.6.1.2.1.34.4.1.3.1.1.1 | ColumnappnLocalTgDest | not-accessible | current | Administratively assigned name of the destination node for this TG. This is the fully qualified name of a network node, end node, LEN node, or virtual routing … |
| 1.3.6.1.2.1.34.4.1.3.1.1.2 | ColumnappnLocalTgNum | not-accessible | current | Number associated with this transmission group. |
| 1.3.6.1.2.1.34.4.1.3.1.1.3 | ColumnappnLocalTgDestVirtual | read-only | current | Indicates whether the destination node for this TG is a virtual routing node. |
| 1.3.6.1.2.1.34.4.1.3.1.1.4 | ColumnappnLocalTgDlcData | read-only | current | DLC-specific data related to a link connection network. |
| 1.3.6.1.2.1.34.4.1.3.1.1.5 | ColumnappnLocalTgPortName | read-only | current | Administratively assigned name for the local port associated with this TG. A zero-length string indicates that this value is unknown. |
| 1.3.6.1.2.1.34.4.1.3.1.1.6 | ColumnappnLocalTgQuiescing | read-only | current | Indicates whether the transmission group is quiescing. |
| 1.3.6.1.2.1.34.4.1.3.1.1.7 | ColumnappnLocalTgOperational | read-only | current | Indicates whether the transmission group is operational. |
| 1.3.6.1.2.1.34.4.1.3.1.1.8 | ColumnappnLocalTgCpCpSession | read-only | current | Indicates whether CP-CP sessions are supported on this TG, and whether the TG owner's contention-winner session is active on this TG. Some nodes in the network… |
| 1.3.6.1.2.1.34.4.1.3.1.1.9 | ColumnappnLocalTgEffCap | read-only | current | Effective capacity for this TG. |
| 1.3.6.1.2.1.34.4.1.3.1.1.10 | ColumnappnLocalTgConnCost | read-only | current | Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255. |
| 1.3.6.1.2.1.34.4.1.3.1.1.11 | ColumnappnLocalTgByteCost | read-only | current | Relative cost of transmitting a byte over this link. Range is from 0 (lowest cost) to 255. |
| 1.3.6.1.2.1.34.4.1.3.1.1.12 | ColumnappnLocalTgSecurity | read-only | current | Administratively assigned security level of this TG. |
| 1.3.6.1.2.1.34.4.1.3.1.1.13 | ColumnappnLocalTgDelay | read-only | current | Administratively assigned delay associated with this TG. |
| 1.3.6.1.2.1.34.4.1.3.1.1.14 | ColumnappnLocalTgUsr1 | read-only | current | First user-defined TG characteristic for this TG. This is an administratively assigned value associated with the TG. |
| 1.3.6.1.2.1.34.4.1.3.1.1.15 | ColumnappnLocalTgUsr2 | read-only | current | Second user-defined TG characteristic for this TG. This is an administratively assigned value associated with the TG. |
| 1.3.6.1.2.1.34.4.1.3.1.1.16 | ColumnappnLocalTgUsr3 | read-only | current | Third user-defined TG characteristic for this TG. This is an administratively assigned value associated with the TG. |
| 1.3.6.1.2.1.34.4.1.3.1.1.17 | ColumnappnLocalTgHprSup | read-only | current | Indicates the level of high performance routing (HPR) support over this TG : noHprSupport(1) - no HPR support hprBaseOnly(2) - HPR base (option set 1400) suppo… |
| 1.3.6.1.2.1.34.4.1.3.1.1.18 | ColumnappnLocalTgIntersubnet | read-only | current | Indicates whether the transmission group is an intersubnet TG, which defines a border between subnetworks. |
| 1.3.6.1.2.1.34.4.1.3.1.1.19 | ColumnappnLocalTgMltgLinkType | read-only | current | This object indicates whether the transmission group is a multi-link TG. A TG that has been brought up as a multi-link TG is reported as one, even if it curren… |
| 1.3.6.1.2.1.34.4.1.3.1.1.20 | ColumnappnLocalTgBranchLinkType | read-only | current | Branch link type of this TG: other(1) = the agent has determined the TG's branch link type to be a value other than branch uplink or branch downlink. This is t… |
| 1.3.6.1.2.1.34.4.1.3.2 | TableappnLocalEnTgTable | not-accessible | current | Table describing all of the TGs owned by the end nodes known to this node via TG registration. This node does not represent its own view of the TG on behalf of… |
| 1.3.6.1.2.1.34.4.1.3.2.1 | RowappnLocalEnTgEntry | not-accessible | current | This table requires multiple indexes to uniquely identify each TG. They are originating CPname, destination CPname, and the TG number. |
| 1.3.6.1.2.1.34.4.1.3.2.1.1 | ColumnappnLocalEnTgOrigin | not-accessible | current | Administratively assigned name of the origin node for this TG. This is a fully qualified network name. |
| 1.3.6.1.2.1.34.4.1.3.2.1.2 | ColumnappnLocalEnTgDest | not-accessible | current | Administratively assigned name of the destination node for this TG. This is the fully qualified name of a network node, end node, LEN node, or virtual routing … |
| 1.3.6.1.2.1.34.4.1.3.2.1.3 | ColumnappnLocalEnTgNum | not-accessible | current | Number associated with this transmission group. |
| 1.3.6.1.2.1.34.4.1.3.2.1.4 | ColumnappnLocalEnTgEntryTimeLeft | read-only | current | Number of days before deletion of this end node TG entry. |
| 1.3.6.1.2.1.34.4.1.3.2.1.5 | ColumnappnLocalEnTgDestVirtual | read-only | current | Indicates whether the destination node is a virtual routing node. |
| 1.3.6.1.2.1.34.4.1.3.2.1.6 | ColumnappnLocalEnTgDlcData | read-only | current | DLC-specific data related to a link connection network. |
| 1.3.6.1.2.1.34.4.1.3.2.1.7 | ColumnappnLocalEnTgOperational | read-only | current | Indicates whether the transmission group is operational. |
| 1.3.6.1.2.1.34.4.1.3.2.1.8 | ColumnappnLocalEnTgCpCpSession | read-only | current | Indicates whether CP-CP sessions are supported on this TG, and whether the TG owner's contention-winner session is active on this TG. Some nodes in the network… |
| 1.3.6.1.2.1.34.4.1.3.2.1.9 | ColumnappnLocalEnTgEffCap | read-only | current | Effective capacity for this TG. |
| 1.3.6.1.2.1.34.4.1.3.2.1.10 | ColumnappnLocalEnTgConnCost | read-only | current | Cost per connect time: a value representing the relative cost per unit of time to use the TG. Range is from 0, which means no cost, to 255. |
| 1.3.6.1.2.1.34.4.1.3.2.1.11 | ColumnappnLocalEnTgByteCost | read-only | current | Relative cost of transmitting a byte over this link. Range is from 0, which means no cost, to 255. |
| 1.3.6.1.2.1.34.4.1.3.2.1.12 | ColumnappnLocalEnTgSecurity | read-only | current | Administratively assigned security level of this TG. |
| 1.3.6.1.2.1.34.4.1.3.2.1.13 | ColumnappnLocalEnTgDelay | read-only | current | Administratively assigned delay associated with this TG. |
| 1.3.6.1.2.1.34.4.1.3.2.1.14 | ColumnappnLocalEnTgUsr1 | read-only | current | First user-defined TG characteristic for this TG. This is an administratively assigned value associated with the TG. |
| 1.3.6.1.2.1.34.4.1.3.2.1.15 | ColumnappnLocalEnTgUsr2 | read-only | current | Second user-defined TG characteristic for this TG. This is an administratively assigned value associated with the TG. |
| 1.3.6.1.2.1.34.4.1.3.2.1.16 | ColumnappnLocalEnTgUsr3 | read-only | current | Third user-defined TG characteristic for this TG. This is an administratively assigned value associated with the TG. |
| 1.3.6.1.2.1.34.4.1.3.2.1.17 | ColumnappnLocalEnTgMltgLinkType | read-only | current | This object indicates whether the transmission group is a multi-link TG. A TG that has been brought up as a multi-link TG is reported as one, even if it curren… |
| 1.3.6.1.2.1.34.4.1.4 | NodeappnDir | |||
| 1.3.6.1.2.1.34.4.1.4.1 | NodeappnDirPerf | |||
| 1.3.6.1.2.1.34.4.1.4.1.1 | ScalarappnDirMaxCaches | read-only | current | Maximum number of cache entries allowed. This is an administratively assigned value. |
| 1.3.6.1.2.1.34.4.1.4.1.2 | ScalarappnDirCurCaches | read-only | current | Current number of cache entries. |
| 1.3.6.1.2.1.34.4.1.4.1.3 | ScalarappnDirCurHomeEntries | read-only | current | Current number of home entries. |
| 1.3.6.1.2.1.34.4.1.4.1.4 | ScalarappnDirRegEntries | read-only | current | Current number of registered entries. |
| 1.3.6.1.2.1.34.4.1.4.1.5 | ScalarappnDirInLocates | read-only | current | Number of directed Locates received since the node was last reinitialized. |
| 1.3.6.1.2.1.34.4.1.4.1.6 | ScalarappnDirInBcastLocates | read-only | current | Number of broadcast Locates received since the node was last reinitialized. |
| 1.3.6.1.2.1.34.4.1.4.1.7 | ScalarappnDirOutLocates | read-only | current | Number of directed Locates sent since the node was last reinitialized. |
| 1.3.6.1.2.1.34.4.1.4.1.8 | ScalarappnDirOutBcastLocates | read-only | current | Number of broadcast Locates sent since the node was last reinitialized. |
| 1.3.6.1.2.1.34.4.1.4.1.9 | ScalarappnDirNotFoundLocates | read-only | current | Number of directed Locates returned with a 'not found' since the node was last reinitialized. |
| 1.3.6.1.2.1.34.4.1.4.1.10 | ScalarappnDirNotFoundBcastLocates | read-only | current | Number of broadcast Locates returned with a 'not found' since the node was last reinitialized. |
| 1.3.6.1.2.1.34.4.1.4.1.11 | ScalarappnDirLocateOutstands | read-only | current | Current number of outstanding Locates, both directed and broadcast. This value varies. A value of zero indicates that no Locates are unanswered. |
| 1.3.6.1.2.1.34.4.1.4.2 | TableappnDirTable | not-accessible | current | Table containing information about all known LUs. |
| 1.3.6.1.2.1.34.4.1.4.2.1 | RowappnDirEntry | not-accessible | current | This table is indexed by the LU name. |
| 1.3.6.1.2.1.34.4.1.4.2.1.1 | ColumnappnDirLuName | not-accessible | current | Fully qualified network LU name in the domain of the serving network node. Entries take one of three forms: - Explicit entries do not contain the character '*'… |
| 1.3.6.1.2.1.34.4.1.4.2.1.2 | ColumnappnDirNnServerName | read-only | current | Fully qualified control point (CP) name of the network node server. For unassociated end node entries, a zero-length string is returned. |
| 1.3.6.1.2.1.34.4.1.4.2.1.3 | ColumnappnDirLuOwnerName | read-only | current | Fully qualified CP name of the node at which the LU is located. This name is the same as the serving NN name when the LU is located at a network node. It is al… |
| 1.3.6.1.2.1.34.4.1.4.2.1.4 | ColumnappnDirLuLocation | read-only | current | Specifies the location of the LU with respect to the local node. |
| 1.3.6.1.2.1.34.4.1.4.2.1.5 | ColumnappnDirType | read-only | current | Directory types are: 1 - Home The LU is in the domain of the local node, and the LU information has been configured at the local node. 2 - Cache The LU has pre… |
| 1.3.6.1.2.1.34.4.1.4.2.1.6 | ColumnappnDirApparentLuOwnerName | read-only | current | Fully qualified CP name of the node at which the LU appears to be located. This object and the appnDirLuOwnerName object are related as follows: Implementation… |
| 1.3.6.1.2.1.34.4.1.5 | NodeappnCos | |||
| 1.3.6.1.2.1.34.4.1.5.1 | TableappnCosModeTable | not-accessible | current | Table representing all of the defined mode names for this node. The table contains the matching COS name for each mode name. |
| 1.3.6.1.2.1.34.4.1.5.1.1 | RowappnCosModeEntry | not-accessible | current | This table is indexed by the mode name. |
| 1.3.6.1.2.1.34.4.1.5.1.1.1 | ColumnappnCosModeName | not-accessible | current | Administratively assigned name for this mode. |
| 1.3.6.1.2.1.34.4.1.5.1.1.2 | ColumnappnCosModeCosName | read-only | current | Administratively assigned name for this class of service. |
| 1.3.6.1.2.1.34.4.1.5.2 | TableappnCosNameTable | not-accessible | current | Table mapping all of the defined class-of-service names for this node to their network transmission priorities. |
| 1.3.6.1.2.1.34.4.1.5.2.1 | RowappnCosNameEntry | not-accessible | current | The COS name is the index to this table. |
| 1.3.6.1.2.1.34.4.1.5.2.1.1 | ColumnappnCosName | not-accessible | current | Administratively assigned name for this class of service. |
| 1.3.6.1.2.1.34.4.1.5.2.1.2 | ColumnappnCosTransPriority | read-only | current | Transmission priority for this class of service: low(1) - (X'01'): low priority medium(2) - (X'02'): medium priority high(3) - (X'03'): high priority network(4… |
| 1.3.6.1.2.1.34.4.1.5.3 | TableappnCosNodeRowTable | not-accessible | current | This table contains all node-row information for all classes of service defined in this node. |
| 1.3.6.1.2.1.34.4.1.5.3.1 | RowappnCosNodeRowEntry | not-accessible | current | A node entry for a given class of service. |
| 1.3.6.1.2.1.34.4.1.5.3.1.1 | ColumnappnCosNodeRowName | not-accessible | current | Administratively assigned name for this class of service. |
| 1.3.6.1.2.1.34.4.1.5.3.1.2 | ColumnappnCosNodeRowIndex | not-accessible | current | Subindex under appnCosNodeRowName, corresponding to a row in the node table for the class of service identified in appnCosNodeRowName. For each class of servic… |
| 1.3.6.1.2.1.34.4.1.5.3.1.3 | ColumnappnCosNodeRowWgt | read-only | current | Weight to be associated with the nodes that fit the criteria specified by this node row. This value can either be a character representation of an integer, or … |
| 1.3.6.1.2.1.34.4.1.5.3.1.4 | ColumnappnCosNodeRowResistMin | read-only | current | Minimum route addition resistance value for this node. Range of values is 0-255. The lower the value, the more desirable the node is for intermediate routing. |
| 1.3.6.1.2.1.34.4.1.5.3.1.5 | ColumnappnCosNodeRowResistMax | read-only | current | Maximum route addition resistance value for this node. Range of values is 0-255. The lower the value, the more desirable the node is for intermediate routing. |
| 1.3.6.1.2.1.34.4.1.5.3.1.6 | ColumnappnCosNodeRowMinCongestAllow | read-only | current | Indicates whether low congestion will be tolerated. This object and appnCosNodeRowMaxCongestAllow together delineate a range of acceptable congestion states fo… |
| 1.3.6.1.2.1.34.4.1.5.3.1.7 | ColumnappnCosNodeRowMaxCongestAllow | read-only | current | Indicates whether low congestion will be tolerated. This object and appnCosNodeRowMinCongestAllow together delineate a range of acceptable congestion states fo… |
| 1.3.6.1.2.1.34.4.1.5.4 | TableappnCosTgRowTable | not-accessible | current | Table containing all the TG-row information for all classes of service defined in this node. |
| 1.3.6.1.2.1.34.4.1.5.4.1 | RowappnCosTgRowEntry | not-accessible | current | A TG entry for a given class of service. |
| 1.3.6.1.2.1.34.4.1.5.4.1.1 | ColumnappnCosTgRowName | not-accessible | current | Administratively assigned name for this class of service. |
| 1.3.6.1.2.1.34.4.1.5.4.1.2 | ColumnappnCosTgRowIndex | not-accessible | current | Subindex under appnCosTgRowName, corresponding to a row in the TG table for the class of service identified in appnCosTgRowName. For each class of service, thi… |
| 1.3.6.1.2.1.34.4.1.5.4.1.3 | ColumnappnCosTgRowWgt | read-only | current | Weight to be associated with the TGs that fit the criteria specified by this TG row. This value can either be a character representation of an integer, or a fo… |
| 1.3.6.1.2.1.34.4.1.5.4.1.4 | ColumnappnCosTgRowEffCapMin | read-only | current | Minimum acceptable capacity for this class of service. |
| 1.3.6.1.2.1.34.4.1.5.4.1.5 | ColumnappnCosTgRowEffCapMax | read-only | current | Maximum acceptable capacity for this class of service. |
| 1.3.6.1.2.1.34.4.1.5.4.1.6 | ColumnappnCosTgRowConnCostMin | read-only | current | Minimum acceptable cost per connect time for this class of service. Cost per connect time: a value representing the relative cost per unit of time to use this … |
| 1.3.6.1.2.1.34.4.1.5.4.1.7 | ColumnappnCosTgRowConnCostMax | read-only | current | Maximum acceptable cost per connect time for this class of service. Cost per connect time: a value representing the relative cost per unit of time to use this … |
| 1.3.6.1.2.1.34.4.1.5.4.1.8 | ColumnappnCosTgRowByteCostMin | read-only | current | Minimum acceptable cost per byte transmitted for this class of service. Cost per byte transmitted: a value representing the relative cost per unit of time to u… |
| 1.3.6.1.2.1.34.4.1.5.4.1.9 | ColumnappnCosTgRowByteCostMax | read-only | current | Maximum acceptable cost per byte transmitted for this class of service. Cost per byte transmitted: a value representing the relative cost of transmitting a byt… |
| 1.3.6.1.2.1.34.4.1.5.4.1.10 | ColumnappnCosTgRowSecurityMin | read-only | current | Minimum acceptable security for this class of service. |
| 1.3.6.1.2.1.34.4.1.5.4.1.11 | ColumnappnCosTgRowSecurityMax | read-only | current | Maximum acceptable security for this class of service. |
| 1.3.6.1.2.1.34.4.1.5.4.1.12 | ColumnappnCosTgRowDelayMin | read-only | current | Minimum acceptable propagation delay for this class of service. |
| 1.3.6.1.2.1.34.4.1.5.4.1.13 | ColumnappnCosTgRowDelayMax | read-only | current | Maximum acceptable propagation delay for this class of service. |
| 1.3.6.1.2.1.34.4.1.5.4.1.14 | ColumnappnCosTgRowUsr1Min | read-only | current | Minimum acceptable value for this user-defined characteristic. |
| 1.3.6.1.2.1.34.4.1.5.4.1.15 | ColumnappnCosTgRowUsr1Max | read-only | current | Maximum acceptable value for this user-defined characteristic. |
| 1.3.6.1.2.1.34.4.1.5.4.1.16 | ColumnappnCosTgRowUsr2Min | read-only | current | Minimum acceptable value for this user-defined characteristic. |
| 1.3.6.1.2.1.34.4.1.5.4.1.17 | ColumnappnCosTgRowUsr2Max | read-only | current | Maximum acceptable value for this user-defined characteristic. |
| 1.3.6.1.2.1.34.4.1.5.4.1.18 | ColumnappnCosTgRowUsr3Min | read-only | current | Minimum acceptable value for this user-defined characteristic. |
| 1.3.6.1.2.1.34.4.1.5.4.1.19 | ColumnappnCosTgRowUsr3Max | read-only | current | Maximum acceptable value for this user-defined characteristic. |
| 1.3.6.1.2.1.34.4.1.6 | NodeappnSessIntermediate | |||
| 1.3.6.1.2.1.34.4.1.6.1 | NodeappnIsInGlobal | |||
| 1.3.6.1.2.1.34.4.1.6.1.1 | ScalarappnIsInGlobeCtrAdminStatus | read-write | current | Object by which a Management Station can deactivate or activate capture of intermediate-session counts and names, by setting the value to notActive(1) or activ… |
| 1.3.6.1.2.1.34.4.1.6.1.2 | ScalarappnIsInGlobeCtrOperStatus | read-only | current | Indicates whether or not the intermediate session counts are active. The counts referred to here are the eight objects in the AppnIsInTable, from appnIsInP2SFm… |
| 1.3.6.1.2.1.34.4.1.6.1.3 | ScalarappnIsInGlobeCtrStatusTime | read-only | current | The time since the appnIsInGlobeCtrOperStatus object last changed, measured in hundredths of a second. This time can be used to identify when this change occur… |
| 1.3.6.1.2.1.34.4.1.6.1.4 | ScalarappnIsInGlobeRscv | read-write | current | Indicates the current route selection control vector (RSCV) collection option in effect, and allows a Management Station to change the option. The values for t… |
| 1.3.6.1.2.1.34.4.1.6.1.5 | ScalarappnIsInGlobeRscvTime | read-only | current | The time since the appnIsInGlobeRscv object last changed, measured in hundredths of a second. This time can be used to identify when this change occurred in re… |
| 1.3.6.1.2.1.34.4.1.6.1.6 | ScalarappnIsInGlobeActSess | read-only | current | The number of currently active intermediate sessions. |
| 1.3.6.1.2.1.34.4.1.6.1.7 | ScalarappnIsInGlobeHprBfActSess | read-only | current | The number of currently active HPR intermediate sessions. |
| 1.3.6.1.2.1.34.4.1.6.2 | TableappnIsInTable | not-accessible | current | Intermediate Session Information Table |
| 1.3.6.1.2.1.34.4.1.6.2.1 | RowappnIsInEntry | not-accessible | current | Entry of Intermediate Session Information Table. |
| 1.3.6.1.2.1.34.4.1.6.2.1.1 | ColumnappnIsInFqCpName | not-accessible | current | The network-qualified control point name of the node at which the session and PCID originated. For APPN and LEN nodes, this is either CP name of the APPN node … |
| 1.3.6.1.2.1.34.4.1.6.2.1.2 | ColumnappnIsInPcid | not-accessible | current | The procedure correlation identifier (PCID) of a session. It is an 8-byte value assigned by the primary LU. |
| 1.3.6.1.2.1.34.4.1.6.2.1.3 | ColumnappnIsInSessState | read-write | current | Indicates the state of the session: inactive(1) - session is inactive pendactive(2) - session is pending active active(3) - session is active pendinact(4) - se… |
| 1.3.6.1.2.1.34.4.1.6.2.1.4 | ColumnappnIsInPriLuName | read-only | current | The primary LU name of the session. A zero-length string indicates that this name is not available. |
| 1.3.6.1.2.1.34.4.1.6.2.1.5 | ColumnappnIsInSecLuName | read-only | current | The secondary LU name of the session. A zero-length string indicates that this name is not available. |
| 1.3.6.1.2.1.34.4.1.6.2.1.6 | ColumnappnIsInModeName | read-only | current | The mode name used for this session. |
| 1.3.6.1.2.1.34.4.1.6.2.1.7 | ColumnappnIsInCosName | read-only | current | The Class of Service (COS) name used for this session. |
| 1.3.6.1.2.1.34.4.1.6.2.1.8 | ColumnappnIsInTransPriority | read-only | current | Transmission priority for this class of service. Values are: low(1) - (X'01'): low priority medium(2) - (X'02'): medium priority high(3) - (X'03'): high priori… |
| 1.3.6.1.2.1.34.4.1.6.2.1.9 | ColumnappnIsInSessType | read-only | current | The type of intermediate session. Defined values are unknown The session type is not known. lu62 A session between LUs of type 6.2 (as indicated by the LU type… |
| 1.3.6.1.2.1.34.4.1.6.2.1.10 | ColumnappnIsInSessUpTime | read-only | current | Length of time the session has been active, measured in hundredths of a second. |
| 1.3.6.1.2.1.34.4.1.6.2.1.11 | ColumnappnIsInCtrUpTime | read-only | current | Length of time the session counters have been active, measured in hundredths of a second. |
| 1.3.6.1.2.1.34.4.1.6.2.1.12 | ColumnappnIsInP2SFmdPius | read-only | current | Number of function management data (FMD) path information units (PIUs) sent from the Primary LU to the Secondary LU since the counts were last activated. |
| 1.3.6.1.2.1.34.4.1.6.2.1.13 | ColumnappnIsInS2PFmdPius | read-only | current | Number of FMD PIUs sent from the Secondary LU to the Primary LU since the counts were last activated. |
| 1.3.6.1.2.1.34.4.1.6.2.1.14 | ColumnappnIsInP2SNonFmdPius | read-only | current | Number of non-FMD PIUs sent from the Primary LU to the Secondary LU since the counts were last activated. |
| 1.3.6.1.2.1.34.4.1.6.2.1.15 | ColumnappnIsInS2PNonFmdPius | read-only | current | Number of non-FMD PIUs sent from the Secondary LU to the Primary LU since the counts were last activated. |
| 1.3.6.1.2.1.34.4.1.6.2.1.16 | ColumnappnIsInP2SFmdBytes | read-only | current | Number of FMD bytes sent from the Primary LU to the Secondary LU since the counts were last activated. |
| 1.3.6.1.2.1.34.4.1.6.2.1.17 | ColumnappnIsInS2PFmdBytes | read-only | current | Number of FMD bytes sent from the Secondary LU to the Primary LU since the counts were last activated. |
| 1.3.6.1.2.1.34.4.1.6.2.1.18 | ColumnappnIsInP2SNonFmdBytes | read-only | current | Number of non-FMD bytes sent from the Primary LU to the Secondary LU since the counts were last activated. |
| 1.3.6.1.2.1.34.4.1.6.2.1.19 | ColumnappnIsInS2PNonFmdBytes | read-only | current | Number of non-FMD bytes sent from the Secondary LU to the Primary LU since the counts were last activated. |
| 1.3.6.1.2.1.34.4.1.6.2.1.20 | ColumnappnIsInPsAdjCpName | read-only | current | The primary stage adjacent CP name of this session. If the session stage traverses an RTP connection, the CP name of the remote RTP endpoint is returned. |
| 1.3.6.1.2.1.34.4.1.6.2.1.21 | ColumnappnIsInPsAdjTgNum | read-only | current | The primary stage adjacent transmission group (TG) number associated with this session. If the session stage traverses an RTP connection, the value 256 is retu… |
| 1.3.6.1.2.1.34.4.1.6.2.1.22 | ColumnappnIsInPsSendMaxBtuSize | read-only | current | The primary stage maximum basic transmission unit (BTU) size for sending data. |
| 1.3.6.1.2.1.34.4.1.6.2.1.23 | ColumnappnIsInPsSendPacingType | read-only | current | The primary stage type of pacing being used for sending data. |
| 1.3.6.1.2.1.34.4.1.6.2.1.24 | ColumnappnIsInPsSendRpc | read-only | current | The primary stage send residual pace count. This represents the primary stage number of message units (MUs) that can still be sent in the current session windo… |
| 1.3.6.1.2.1.34.4.1.6.2.1.25 | ColumnappnIsInPsSendNxWndwSize | read-only | current | The primary stage size of the next window which will be used to send data. |
| 1.3.6.1.2.1.34.4.1.6.2.1.26 | ColumnappnIsInPsRecvPacingType | read-only | current | The primary stage type of pacing being used for receiving data. |
| 1.3.6.1.2.1.34.4.1.6.2.1.27 | ColumnappnIsInPsRecvRpc | read-only | current | The primary stage receive residual pace count. This represents the primary stage number of message units (MUs) that can still be received in the current sessio… |
| 1.3.6.1.2.1.34.4.1.6.2.1.28 | ColumnappnIsInPsRecvNxWndwSize | read-only | current | The primary stage size of the next window which will be used to receive data. |
| 1.3.6.1.2.1.34.4.1.6.2.1.29 | ColumnappnIsInSsAdjCpName | read-only | current | The secondary stage adjacent CP name of this session. If the session stage traverses an RTP connection, the CP name of the remote RTP endpoint is returned. |
| 1.3.6.1.2.1.34.4.1.6.2.1.30 | ColumnappnIsInSsAdjTgNum | read-only | current | The secondary stage adjacent transmission group (TG) number associated with this session. If the session stage traverses an RTP connection, the value 256 is re… |
| 1.3.6.1.2.1.34.4.1.6.2.1.31 | ColumnappnIsInSsSendMaxBtuSize | read-only | current | The secondary stage maximum basic transmission unit (BTU) size for sending data. |
| 1.3.6.1.2.1.34.4.1.6.2.1.32 | ColumnappnIsInSsSendPacingType | read-only | current | The secondary stage type of pacing being used for sending data. |
| 1.3.6.1.2.1.34.4.1.6.2.1.33 | ColumnappnIsInSsSendRpc | read-only | current | The secondary stage send residual pace count. This represents the secondary stage number of message units (MUs) that can still be sent in the current session w… |
| 1.3.6.1.2.1.34.4.1.6.2.1.34 | ColumnappnIsInSsSendNxWndwSize | read-only | current | The secondary stage size of the next window which will be used to send data. |
| 1.3.6.1.2.1.34.4.1.6.2.1.35 | ColumnappnIsInSsRecvPacingType | read-only | current | The secondary stage type of pacing being used for receiving data. |
| 1.3.6.1.2.1.34.4.1.6.2.1.36 | ColumnappnIsInSsRecvRpc | read-only | current | The secondary stage receive residual pace count. This represents the secondary stage number of message units (MUs) that can still be received in the current se… |
| 1.3.6.1.2.1.34.4.1.6.2.1.37 | ColumnappnIsInSsRecvNxWndwSize | read-only | current | The secondary stage size of the next window which will be used to receive data. |
| 1.3.6.1.2.1.34.4.1.6.2.1.38 | ColumnappnIsInRouteInfo | read-only | current | The route selection control vector (RSCV X'2B') used for this session. It is present for APPN nodes; but is not present for LEN nodes. The format of this vecto… |
| 1.3.6.1.2.1.34.4.1.6.2.1.39 | ColumnappnIsInRtpNceId | read-only | current | The HPR local Network Connection Endpoint of the session. |
| 1.3.6.1.2.1.34.4.1.6.2.1.40 | ColumnappnIsInRtpTcid | read-only | current | The RTP connection local TCID of the session. |
| 1.3.6.1.2.1.34.4.1.6.3 | TableappnIsRtpTable | not-accessible | current | A table indicating how many ISR sessions are transported by each RTP connection. |
| 1.3.6.1.2.1.34.4.1.6.3.1 | RowappnIsRtpEntry | not-accessible | current | Entry of Intermediate Session RTP Table. |
| 1.3.6.1.2.1.34.4.1.6.3.1.1 | ColumnappnIsRtpNceId | not-accessible | current | The local Network Connection Endpoint of the RTP connection. |
| 1.3.6.1.2.1.34.4.1.6.3.1.2 | ColumnappnIsRtpTcid | not-accessible | current | The local TCID of the RTP connection. |
| 1.3.6.1.2.1.34.4.1.6.3.1.3 | ColumnappnIsRtpSessions | read-only | current | The number of intermediate sessions using this RTP connection. |
| 1.3.6.1.2.1.34.4.2 | NodeappnTraps | |||
| 1.3.6.1.2.1.34.4.2.1 | NotificationalertTrap | current | This trap carries a 32-bit SNA Management Services (SNA/MS) Alert ID Number, as specified in SNA/MS Formats. | |
| 1.3.6.1.2.1.34.4.2.2 | ScalaralertIdNumber | read-only | current | A 32-bit SNA Management Services (SNA/MS) Alert ID Number, as specified in SNA/MS Formats. |
| 1.3.6.1.2.1.34.4.2.3 | ScalaraffectedObject | read-only | current | The MIB object associated with the Alert condition, if there is an object associated with it. If no associated object can be identified, the value 0.0 is passe… |
| 1.3.6.1.2.1.34.4.3 | NodeappnConformance | |||
| 1.3.6.1.2.1.34.4.3.1 | NodeappnCompliances | |||
| 1.3.6.1.2.1.34.4.3.1.1 | ComplianceappnCompliance | deprecated | The compliance statement for the SNMPv2 entities that implement the APPN MIB. This is the compliance statement for the RFC 2155-level version of the APPN MIB. … | |
| 1.3.6.1.2.1.34.4.3.1.3 | ComplianceappnCompliance2 | current | The compliance statement for the SNMPv2 entities that implement the APPN MIB. In the descriptions for the conditionally mandatory groups that follow, the branc… | |
| 1.3.6.1.2.1.34.4.3.2 | NodeappnGroups | |||
| 1.3.6.1.2.1.34.4.3.2.1 | GroupappnGeneralConfGroup | deprecated | A collection of objects providing the instrumentation of APPN general information and capabilities. This RFC 2155-level group was deprecated when the appnNodeM… | |
| 1.3.6.1.2.1.34.4.3.2.2 | GroupappnPortConfGroup | current | A collection of objects providing the instrumentation of APPN port information. | |
| 1.3.6.1.2.1.34.4.3.2.3 | GroupappnLinkConfGroup | deprecated | A collection of objects providing the instrumentation of APPN link information. This RFC 2155-level group was deprecated when the appnLsMltgMember object was a… | |
| 1.3.6.1.2.1.34.4.3.2.4 | GroupappnLocalTgConfGroup | deprecated | A collection of objects providing the instrumentation of APPN local TG information. This RFC 2155-level group was deprecated when the appnLocalTgMltgLinkType o… | |
| 1.3.6.1.2.1.34.4.3.2.5 | GroupappnDirTableConfGroup | deprecated | A collection of objects providing the instrumentation of the APPN directory database. This RFC 2155-level group was deprecated when the appnDirApparentLuOwnerN… | |
| 1.3.6.1.2.1.34.4.3.2.6 | GroupappnNnUniqueConfGroup | current | A collection of objects providing instrumentation unique to APPN network nodes. | |
| 1.3.6.1.2.1.34.4.3.2.7 | GroupappnEnUniqueConfGroup | current | A collection of objects providing instrumentation for APPN end nodes. Some of these objects also appear in the instrumentation for a branch network node. | |
| 1.3.6.1.2.1.34.4.3.2.8 | GroupappnVrnConfGroup | current | An object providing the instrumentation for virtual routing node support in an APPN node. | |
| 1.3.6.1.2.1.34.4.3.2.9 | GroupappnNnTopoConfGroup | deprecated | The appnNnTopoConfGroup is mandatory only for network nodes. This RFC 2155-level group was deprecated when the appnNnNodeFRBranchAwareness, appnNnTgFRMltgLinkT… | |
| 1.3.6.1.2.1.34.4.3.2.10 | GroupappnLocalEnTopoConfGroup | deprecated | The appnLocalEnTopoConfGroup is mandatory only for network nodes. This RFC 2155-level group was deprecated when the appnLocalEnTgMltgLinkType object was added. | |
| 1.3.6.1.2.1.34.4.3.2.11 | GroupappnLocalDirPerfConfGroup | current | The appnLocalDirPerfConfGroup is mandatory only for APPN network nodes and end nodes. | |
| 1.3.6.1.2.1.34.4.3.2.12 | GroupappnCosConfGroup | current | The appnCosConfGroup is mandatory only for APPN network nodes and end nodes. | |
| 1.3.6.1.2.1.34.4.3.2.13 | GroupappnIntSessConfGroup | current | The appnIntSessConfGroup is mandatory only for network nodes. | |
| 1.3.6.1.2.1.34.4.3.2.14 | GroupappnHprBaseConfGroup | current | The appnHprBaseConfGroup is mandatory only for nodes that implement the HPR base (APPN option set 1400). | |
| 1.3.6.1.2.1.34.4.3.2.15 | GroupappnHprRtpConfGroup | current | The appnHprRtpConfGroup is mandatory only for nodes that implement the HPR RTP tower (APPN option set 1401). | |
| 1.3.6.1.2.1.34.4.3.2.16 | GroupappnHprCtrlFlowsRtpConfGroup | current | The appnHprCtrlFlowsRtpConfGroup is mandatory only for nodes that implement the HPR Control Flows over RTP tower (APPN option set 1402). | |
| 1.3.6.1.2.1.34.4.3.2.17 | GroupappnHprBfConfGroup | current | The appnHprBfConfGroup is mandatory only for nodes that implement the APPN/HPR boundary function. | |
| 1.3.6.1.2.1.34.4.3.2.18 | GroupappnTrapConfGroup | current | The appnTrapConfGroup is optional for all APPN nodes. Nodes implementing this group shall also implement the appnTrapNotifGroup. | |
| 1.3.6.1.2.1.34.4.3.2.19 | GroupappnTrapNotifGroup | current | The appnTrapNotifGroup is optional for all APPN nodes. Nodes implementing this group shall also implement the appnTrapConfGroup. | |
| 1.3.6.1.2.1.34.4.3.2.20 | GroupappnBrNnConfGroup | current | A collection of objects providing instrumentation for branch network nodes. Some of these objects also appear in the instrumentation for an end node. Note: A b… | |
| 1.3.6.1.2.1.34.4.3.2.26 | GroupappnGeneralConfGroup2 | current | A collection of objects providing the instrumentation of APPN general information and capabilities. | |
| 1.3.6.1.2.1.34.4.3.2.27 | GroupappnLinkConfGroup2 | current | A collection of objects providing the instrumentation of APPN link information. | |
| 1.3.6.1.2.1.34.4.3.2.28 | GroupappnLocalTgConfGroup2 | current | A collection of objects providing the instrumentation of APPN local TG information. | |
| 1.3.6.1.2.1.34.4.3.2.29 | GroupappnDirTableConfGroup2 | current | A collection of objects providing the instrumentation of the APPN directory database. | |
| 1.3.6.1.2.1.34.4.3.2.30 | GroupappnNnTopoConfGroup2 | current | The appnNnTopoConfGroup is mandatory only for network nodes. | |
| 1.3.6.1.2.1.34.4.3.2.31 | GroupappnLocalEnTopoConfGroup2 | current | A collection of objects providing the instrumentation of the information that a network node possesses about the end nodes directly attached to it. |
Type Definitions
| Name | Syntax | Status | Description |
|---|---|---|---|
| AppnLinkStationCounter | Counter32 | current | An object providing statistics for an APPN link station. A Management Station can detect discontinuities in this counter by monitoring the appnLsCounterDisconTime object. |
| AppnNodeCounter | Counter32 | current | An object providing global statistics for the entire APPN node. A Management Station can detect discontinuities in this counter by monitoring the appnNodeCounterDisconTime object. |
| AppnPortCounter | Counter32 | current | An object providing statistics for an APPN port. A Management Station can detect discontinuities in this counter by monitoring the appnPortCounterDisconTime object. |
| AppnTgDelay | OCTET STRING (SIZE (1)) | current | Relative amount of time that it takes for a signal to travel the length of a logical link. This time is represented in microseconds, using the same encoding scheme used in cv47 in a topology update. Some of the more com… |
| AppnTgDlcData | OCTET STRING (SIZE (0..64)) | current | DLC-specific data related to a connection network transmission group. For other TGs, a zero-length string is returned. Examples of the type of data returned by an object with this syntax include the following: Token-Rin… |
| AppnTgEffectiveCapacity | OCTET STRING (SIZE (1)) | current | A value representing the effective capacity of a transmission group. This is an administratively assigned value derived from the link bandwidth and maximum load factor. It is encoded in the same way as byte 7 of cv47, a… |
| AppnTgSecurity | INTEGER { nonsecure(1), publicSwitchedNetwork(32), undergroundCable(64), secureConduit(96), guardedConduit(128), encrypted(160), guardedRadiation(192) } | current | A value representing the level of security on a transmission group. A class of service definition includes an indication of the acceptable TG security value(s) for that class of service. The following seven values are d… |
| AppnTopologyEntryTimeLeft | INTEGER (0..15) | current | Number of days before deletion of this entry from the topology database. Range is 0-15. A value of 0 indicates that the entry is either in the process of being deleted, or is being marked for deletion at the next garbag… |
| DisplayableDlcAddress | OCTET STRING (SIZE (0..64)) | current | DLC address of a port or link station, represented as an OCTET STRING containing 0 to 64 ASCII characters. A Management Station should use a value of this type only for display. The 'real' DLC address, i.e., the sequenc… |
| SnaClassOfServiceName | OCTET STRING (SIZE (0..8)) | current | An SNA class-of-service (COS) name, ranging from 1 to 8 ASCII characters. COS names take one of two forms: - a user-defined COS name is constructed from the uppercase letters 'A' - 'Z' and the numerics '0' - '9', with t… |
| SnaControlPointName | OCTET STRING (SIZE (3..17)) | current | A fully qualified SNA control point name, consisting of a 1 to 8 character network identifier (NetId), a period ('.'), and a 1 to 8 character control point name (CpName). The NetId and CpName are constructed from the up… |
| SnaModeName | OCTET STRING (SIZE (0..8)) | current | An SNA mode name, ranging from 1 to 8 ASCII characters. Mode names take one of two forms: - a user-defined mode name is constructed from the uppercase letters 'A' - 'Z' and the numerics '0' - '9', with the restriction t… |
| SnaNodeIdentification | OCTET STRING (SIZE (8)) | current | An SNA Node Identification consists of two parts, which together comprise four bytes of hexadecimal data. In SNA the Node Identification is transported in bytes 2-5 of the XID. The block number is the first three digits… |
| SnaSenseData | OCTET STRING (SIZE (8)) | current | To facilitate their display by a Management Station, sense data objects in the MIB are represented as OCTET STRINGS containing eight ASCII characters. Eight '0' characters indicates that no sense data identifying an SNA… |